This was partially fixed in commit ddeaeeec19 ("nvme: Only check
timeouts on requests from the same process"), but the function that
calls nvme_pcie_qpair_check_timeout() was also erroneously filtering out
the admin queue. Restore the original behavior of checking all queue
types.
Change-Id: I26a44ff5eb772735d314ce7b8322ba9222675911
Fixes: 31bf5d795e ("nvme: make timeout function per process")
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/411628
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
verified on QEMU NVMe for OCSSD 2.0 and RFC will be shared soon
Change-Id: I01c513e30768ac1961a5c5af20de3a2490da7729
Signed-off-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-on: https://review.gerrithub.io/413854
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For attach/detach command, the identify namespace data should be
updated during the namespace attribute notice event callback, while
here, in case of the driver may not set aer callback, so update the
namespace identify same with attach command.
Change-Id: Ie594b2ff646a67488d03af2771c00f9947395aba
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/412884
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When the shadow doorbell feature is enabled, no actual MMIO takes place
when a shadow update is sufficient; tighten the bounds of the updates to
g_thread_mmio_ctrlr in the two doorbell update locations so that we only
need to touch the thread-local variable when actual MMIO access is
required.
Change-Id: Ida974bec33f56cbb9f7d3611f483c6975ec773ab
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/413856
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is consistent with the Open Channel naming we are using elsewhere.
Change-Id: Ib088359bed29a958f8b50e41cf34143a23429f54
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/413840
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: I841d7b47bc85498abb608944587e7b7585138263
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/411588
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This reduces submission+completion time by 10-15
core clocks per IO on an Intel Xeon Platinum
processor. Similar improvements should be seen
on other processors as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3241ba53ef5f21a8eef930b523a951525922e6b8
Reviewed-on: https://review.gerrithub.io/413284
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This variable will no longer be static in a future patch.
So make the name a bit more verbose since it will now
be visible outside of the module that defines it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5e720ef44aa5c5f38e0fe91de091a89b9970fcb7
Reviewed-on: https://review.gerrithub.io/413283
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The memset was zeroing a lot of bytes that get
initialized either later in this function or elsewhere
in the submission code path. Eliminating these
extra memsets saves a few nanoseconds of CPU overhead
in the NVMe submission path.
Note: one use of the cpl data member depended on
the nvme_allocate_request memset. Since this use
case is not in the primary I/O path, just memset it
in that specific location before using it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ife483a4d9c24c033cc7d26d94ec1700905a936f4
Reviewed-on: https://review.gerrithub.io/413153
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Rather than storing nvme_payload::type explicitly, use the SGL reset
function pointer as an indicator: if reset_sgl_fn is non-NULL, then the
payload is an SGL type; otherwise it is a contiguous buffer type.
This eliminates the one-byte type member from struct nvme_payload,
making it an even 32 bytes instead of 33, allowing the removal of the
awkward packing inside struct nvme_request.
Change-Id: If2a32437a23fe14eb5287e096ac060067296f1dd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/413175
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The definitions of these macros will change in an upcoming patch that
modifies the way nvme_payload is laid out.
Change-Id: Ic6edc18928542b07be7519a72bdbf6babbeb0131
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/413174
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will simplify upcoming patches that change the way nvme_payload
stores its type.
Change-Id: Idf0a5b8dfd7d66a10f89254d2c5c54fee2968a43
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/413173
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Number of Namespaces of controller identify structure
defines the maximum number of namespaces supported by
this controller, for physical NVMe controllers, the NN
is a fixed number, while here, we set the same rule for
NVMeoF controllers.
After NVMe driver got namespace notice event, it should
update the namespace identify data structure for NS
attach/detach commands.
Change-Id: Id72a2600a2ce9492fa2d6e09924667acbb77ae43
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/412883
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fail when number of child requests is >= NVME_MAX_CHILD_REQUESTS.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I8c370053847c9f623b861137da8d2387a66fc030
Reviewed-on: https://review.gerrithub.io/408850
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For some cases, especially for Admin commands, there maybe has
recursive commands, e.g.: in AER callback we may send a new AER
request, in such case, the current code can't process such
case. While here, move the completion queue head to next before
any response callback will fix such issue.
Change-Id: Ide56701d94615881790cf025ede2f07420b9b16e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/412766
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Factor out the common pattern of waiting for an internally-submitted
command to complete. This will give us a convenient central place to
add error checking.
Change-Id: I65334d654d294cfb208fc86d16fa387ac5432254
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/412545
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
As of NVMe 1.3b, there is only one command set. But pipe
this through the driver per-spec anyway.
Change-Id: I4faf8596f5ce638e5e2a500b424e00ceb6e89edc
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/412102
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When IO is finished SPDK will trigger callback at controller layer,
while here, wrapper the completion callback into a function so
that we can add error injection at this function in following patch.
Change-Id: I7b7a6d278d87fd09a05f51f688398fdf2e9c4e05
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/411630
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For the same reason as commit 31bf5d795e ("nvme: make timeout function
per process"), the AER callback also needs to be stored in the
per-process controller data structure.
Change-Id: I41425d81a2ab16c06ef9b900bef6a6128117fcb0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/410953
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The RDMA transport was not correctly registering new controllers on
creation. RDMA doesn't support multi-process, but it still needs a
single per-process structure for the owning process.
Change-Id: I337ab9d00b468671e7c7a21175682beed4cfdd2e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/410958
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The per-process controller data may only be touched while holding the
ctrlr_lock.
Change-Id: I18c8c4e43db4d58e6b86f0c0fd222f6d30830b85
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/410952
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I7598222db5d76c1a1578fbb5935d4348f7c62f54
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/410951
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Avoid sending CNS values other than 0 and 1 to controllers with the
Identify CNS quirk added in commit 6442451b10 ("nvme: add a quirk for
identify 0x2").
This probably doesn't affect either of the controllers with the quirk in
practice, since this command is already only sent to controllers that
report NVMe version 1.3 or newer, but let's add the check anyway for
consistency.
Change-Id: I858c28ab7d43714c501dd22d6797259054f0f0a8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/410941
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9cfc237a8514a1d323313851e14576ba2ba69077
Signed-off-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-on: https://review.gerrithub.io/410529
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8573732b3049e2a5b471e5a0313e39019fdaad5f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/410518
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This will be used later instead of retrieving VS (potentially via a Get
property command for Fabrics) multiple times.
The Active NS List code was previously depending on the VER field of the
Identify Controller data, but this was only added with NVMe 1.2, so we
can't rely on it to detect NVMe 1.1 controllers; it is changed to use
the new cache VS value instead.
Change-Id: Iba9ed5ecbc82b4654973438d119daba0c4cf0724
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/408895
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In addition to checking for the required version, also use the OAES bits
to determine which features to request.
Change-Id: Idb07e4175cca5609904876bd17d912b50bc6b62a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/409352
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ia2fd4d31560c9117b167cbf12d2749c303e4cb8c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/408772
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
uint8_t is too small to handle huge payloads. 32M payload already
overflow this.
Change-Id: I083ba7d3ded25b99571d422b7a3a4e7653a8d231
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/408677
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I80521c4c01daf033319f88cf273255387a7b5248
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/408403
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This fixes the VFIO hot-remove path, which called remove_cb without
checking to see if it had been specified by the user. The normal uevent
removal path already checked for remove_cb.
Change-Id: I0ad8d2c90a77b16800a8b505cb69ea05b0706d70
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/408392
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is an internal NVMe driver function, so we don't need to allow for
the case where trid is NULL. All callers already passed an address of a
local variable except the unit tests, which can be trivially fixed.
Fixes a static analyzer warning about trid being dereferenced in
nvme_transport_ctrlr_construct() before being checked for NULL in the
caller.
Change-Id: I2bfeb5c92a302093b7c7f2949adcd18baa11855a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/408395
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was broken by commit 31bf5d795
Change-Id: I8c81c7b76cd47db347ce9c3f8a0e8296b690cb49
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/408240
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9fee91ece79b204962a70fc49d9032abe2c55090
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/408218
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
As of glibc version 2.3.4 onwards getpid() is no longer cached. SPDK
makes calls to it in nvme_allocate_request() which is called for each
nvme request received. This results in a system calls up to millions of
times per second which slows down nvme submissions. Since the pid never
changes, it only needs to be called once in initialization per process.
This improves the performance of nvme_allocate_request() signficantly.
Change-Id: Idee0f06484d459906b9ce1d9b7360a33119c7e56
Signed-off-by: Jonathan Richardson <jonathan.richardson@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-on: https://review.gerrithub.io/407599
Reviewed-by: Scott Branden <sbranden@gmail.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The functions they were referring to have been renamed; rather than
fixing up the function names, use the spec-defined NVMe command names so
it's more understandable. (The second message was also incorrectly
referring to "set" instead of "get", which is fixed as well.)
Change-Id: Id140a91c837d8c913760d2f55318472689c00f45
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/407593
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Similar to the previous patch, some controllers may report 0 namespaces;
we should still be able to send admin commands in this situation.
Change-Id: Ia14e3ce773c63e645199e1c40ba5b37095da2473
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/407497
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A controller that fails the Set Features/Get Features - Number of Queues
won't be able to create I/O queues, but it may still accept admin
commands.
Change-Id: Iec79d641f7d460448a8d8e1295764f1f03f98594
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/407378
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6e58baaeb09580b5f70e1acf5323376ca0b26bbf
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/407382
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
strncpy is going to be added to the list of banned functions because
it does not guarantee strings are null terminated.
Change-Id: Ic18623c281cca7c3d87732bc7677b284d57685c8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/407023
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I79dad84d1dc58e61eb36b461b41fbd7ee73631fc
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/406899
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add the event status code to assist in debugging, and reorder the
message so it is easier to read.
Change-Id: I2a1fb900471a482707fbfb6db84bc81cb3b0cdad
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/406636
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
- Add support for multi page CNS 0x2
- Use CNS value 0x02 (SPDK_NVME_IDENTIFY_ACTIVE_NS_LIST)
to query active namespaces
- Add an API to iterate the active list
Change-Id: Iea524881fa6e3610a7d85ab02a2005a92fd633df
Signed-off-by: John Meneghini <johnm@netapp.com>
Reviewed-on: https://review.gerrithub.io/401957
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We don't need to re-register memory with the same ibv protection domain
more than once; maintain a global list of already-registered PDs and
reuse the existing registration for other queues.
Change-Id: I7ec9c35ed93083faa00cca4cb5c61104200a4c66
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/405702
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows us to remove most uses of spdk_pci_get_device(), which looks
up a PCI device structure from an arbitrary PCI address. This function
is problematic, since it uses internal DPDK data structures that aren't
meant to be part of the public API. There is still one use in the
codebase, which will be cleaned up in another patch.
Change-Id: Ia1fe1f799c240195f6871c1d92821074f884c4e6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/405707
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function retrieves the UUID from a namespace, if available.
Change-Id: I98c55375948b92eaf429b41fb36dfea4e2b780a2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/404734
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Convert nvme_ctrlr_cmd_identify_controller() and
nvme_ctrlr_cmd_identify_namespace() into a single function,
nvme_ctrlr_cmd_identify(), with generic parameters that should be
suitable for all current callers as well as future users.
These functions were internal-only, so there is no public API change.
Change-Id: I3dbb3e6b00308b67ba1f161f8a6b11b6333fca57
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/404733
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A few places were accidentally storing namespace IDs in uint16_t.
Change-Id: Iae9d709fb20bc1ac0a584ccd9683b721ce5de961
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403886
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This lets us have a common place to put definitions like the length of
the UUID string, as well as abstract away some of the API warts in
libuuid (non-const values, no size checking for uuid_unparse, etc.).
Change-Id: I80607fcd21ce57fdbb8729442fbb721bc71ccb98
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402176
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Automatically detect more whitespace errors.
All existing cases are fixed; only whitespace change (verify with
diff -w) except for one comment style fixup in include/spdk/nvme.h.
Change-Id: If750e54b9c8e3421ea6feda5f20184a31431631e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402360
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
There was a bug reported by Cunyin Chang with regards to how the
cmb_current_offset was calculated when the CMB offset into the CMB BAR
is non-zero. This patch fixes this issue and also fixes the problem
that the last valid offset into the BAR *may* differ if registration
is utilized or not (due to the 2MiB alignment and length requirements
for registered memory).
Change-Id: Id08d6a5a40b828338f6a66599171cc8dd59768a3
Signed-off-by: Stephen Bates <sbates@raithlin.com>
Reviewed-on: https://review.gerrithub.io/401832
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I02ca8aed1bba1922a69a9b22bca22bce06e9c55f
Signed-off-by: Pan Liu <liupan1111@gmail.com>
Reviewed-on: https://review.gerrithub.io/399536
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This can be enabled with -t nvme in debug builds.
Change-Id: I4392d0a7decd65cc567fdf6fd56cac6db0424cd8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/401052
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function returns uint64_t, but the existing code was returning
the bool 'false' (which is also 0, so there is no functional change).
Change-Id: I546b15974c2d9e4107efe262950e3eb5613e0e9f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/401051
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Unify several similar functions checking for a buffer of all zero bytes
into the util library.
Change-Id: Idfbeffa22add34ac9ed1bd75ee27d6bd8b188940
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/400892
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
adding nvme_ctrlr_destruct_finish because nvme_transport_ctrlr_destruct may
use a destroyed mutex.
nvme_ctrlr_destruct() free "ctrlr_lock" and after that call
nvme_transport_ctrlr_destruct()->nvme_pcie_ctrlr_destruct()(with pci)->
nvme_ctrlr_proc_get_devhandle()->nvme_robust_mutex_lock(&ctrlr->ctrlr_lock);
Change-Id: I55714ea9097d2c9d844a00b5a88fa2d51a3f4469
Signed-off-by: Ehud Naim <ehudn@marvell.com>
Reviewed-on: https://review.gerrithub.io/399605
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2a3c7a272dc08be5a5ecb4339622816482c4cbb0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Stephen Bates <sbates@raithlin.com>
Reviewed-on: https://review.gerrithub.io/397036
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Enable address translation for I/O buffers within the controller memory
buffer region by registering the CMB using spdk_mem_register().
Change-Id: I44829757ad15fbc3ea96fa494b9fb32dd67a7138
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Stephen Bates <sbates@raithlin.com>
Reviewed-on: https://review.gerrithub.io/397035
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
For a given hardware queue size, only allow a quarter of the queue size
to be returned as completions in a single call to
spdk_nvme_qpair_process_completions(), and adjust num_trackers to match
so that num_trackers + max_completions_cap doesn't exceed the hardware
completion queue size. This ensures that there is room in the
completion queue if new I/O is issued in response to completions before
we ring the completion queue doorbell.
The choice of 1/4 queue size is arbitrary; this seems to be a good
compromise between completion batch size and number of trackers.
Change-Id: I2c5aad7b98bfc8b33e53242240b2c9254fa05b4e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393529
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch remove need for additional buffer when translating error code
to string.
Change-Id: Iaa60088b5c450581d3cdddbb425119b17d55a44b
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/386114
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Only Makefiles for libraries that directly depend on DPDK (rather than
the SPDK env abstraction) should add $(ENV_CFLAGS).
Change-Id: Ifdf44d3ef8c42bbf7f20edd524b330d00658235b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/392818
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Commit ID "269910c0" removed the support of separate metadata,
for those controllers which can support this feature, SPDK driver
can't be used. SPDK provides APIs such as:
spdk_nvme_ctrlr_cmd_io_raw_with_md/spdk_nvme_ns_cmd_write_with_md/
spdk_nvme_ns_cmd_read_with_md, which can support separate metadata.
While here, re-enable this feature with this commit.
Change-Id: If77c21e9ac700c4b334548ebfa7e8e6286285a64
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/392440
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iedfa8d3de8520836e184f7ef0925822fb705fc67
Reviewed-on: https://review.gerrithub.io/391672
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8519a4b68db44cb8fe6dd251a52bf0f1dca73c32
Reviewed-on: https://review.gerrithub.io/391890
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch set the controller as removed in pcie level when the register
return specific value (0xffffffff), we also return the real value to the
upper level (nvme bdev), which will help the upper level do the work of
hotplug.
Change-Id: Ifad45c760cccbce522506ffbf86495318a6b393b
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/391327
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Require braces around all conditional statements, e.g.:
if (cond)
statement();
becomes:
if (cond) {
statement();
}
This is the style used through most of the SPDK code, but several
exceptions crept in over time. Add the astyle option to make sure we
are consistent.
Change-Id: I5a71980147fe8dfb471ff42e8bc06db2124a1a7f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/390914
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To make the error message more clear.
Change-Id: I95a9a3e06f4473da30d022134a8da764f165a070
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/388880
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Disambiguate the log components from the trace functionality
(include/spdk/trace.h).
The internal spdk_trace_flag structure and related functions will be
renamed in a later commit - this is just a find and replace on
SPDK_TRACE_* and SPDK_LOG_REGISTER_TRACE_FLAG().
Change-Id: I617bd5a9fbe35ffb44ae6020b292658c094a0ad6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376421
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
NVMe specification 1.3 added a new Admin command: Doorbell buffer config,
which is used to enhance the performance of host software running in
Virtual Machine, and the Doorbell buffer config feature is only used
for emulated NVMe controllers. There are two buffers: "shadow doorbell"
and "eventidx", host software running in VM will update appropriate
entry in the Shadow doorbell buffer instead of controller's doorbell
registers.
Change-Id: I639ddb5b9a0ca0305bf84035ca2a5e215be06b46
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/383042
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch just make sure SPDK support the hotplug of vfio-attached devices,
but there still issues when we get hotplug events from kernel, this patch tested
based on my modified local vfio-pci driver which just for test purpose and not upstream.
Change-Id: I974177e70e4133d2a583d00e714a7607765d3548
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/390580
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There are two ways to set stockets to nonblocking type:
- ioctl with FIONBIO
- fcntl with O_NONBLOCK
Those two should be equivalent for sockets used in SPDK.
During testing it was shown that VPP interprets only
the second type, so this patch changes all occurences of it.
When here, more descriptive error logs were set in case of
failure.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ifa5b30e3a4fa04fe23f41fa2ae9dab4b01dd7d3c
Reviewed-on: https://review.gerrithub.io/388816
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Only multi-process shared controllers should be inserted into the shared
list in g_spdk_nvme_driver. To accomplish this, create a second
per-process global list of attached controllers (g_nvme_attached_ctrlrs)
and rename the driver struct field to shared_attached_ctrlrs to clarify
its purpose. Additionally, a new helper function, nvme_ctrlr_shared(),
returns whether a given controller should be on the shared or
per-process list.
Change-Id: I46d4e558ece8b7fc3d28868e32bb56d794f21aab
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389190
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Simplify the PCIe transport by using an existing function to look up a
controller by transport ID.
Change-Id: I261865df1ba23069b052ca64944b7637d70c85ba
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/388701
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Each process should manage its own list of controllers that are
initializing; the list doesn't need to be shared between processes.
This is the first step toward preventing non-PCI controllers from being
added into the shared attached_ctrlrs list.
Change-Id: Ia6f85fe89e28a04f0950da5362bb2f49d1b76da9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/388695
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use the env abstraction PCI functions to compare PCI addresses so that
details like whether or not domain is specified or whether 0-padding is
present don't affect the comparison.
For example, 0000:01:00.0 should compare equal to 01:00.0.
Change-Id: I9f3aaeb5f8fdbf3e246e31a41b4c09151288015e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/387202
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Because ppc64 has less strict memory ordering behaviour
than x86 we need to introduce a memory barrier when
polling for completions due to possible reordering
of tracker and cpl access.
Change-Id: Id17116c38b2ba69154c175c539fc97c60897deb0
Signed-off-by: Jonas Pfefferle <jpf@zurich.ibm.com>
Reviewed-on: https://review.gerrithub.io/383728
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I482ad9e722f6fb775c1c91c8661212250a6914bc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/386722
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Some devices may report a RTD3E time that is shorter than their actual
shutdown time in practice; force the timeout to be at least 10 seconds
to allow for a reasonable amount of shutdown time.
This doesn't add any extra delay for devices that do complete the
shutdown process within their reported RTD3E time, since we will return
as soon as the device reports that it is finished shutting down.
Change-Id: I365e66ba6a938400be516df170bd3ff288810caf
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/386719
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
cmd and cpl rings must be aligned on page size boundaries.
Change-Id: I103eed32adfaa4388bc7d672ee166973f796b343
Signed-off-by: Jonas Pfefferle <jpf@zurich.ibm.com>
Reviewed-on: https://review.gerrithub.io/383727
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When a ctrlr is failed to initialize and to respond other
requests, the nvme_ctrlr_fail() will be always called. Add
a log there to have the traddr information so that applications
can know which ctrlr has the problem.
Change-Id: I951062a51349af81a505472f79e3c00a1ead2fbf
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/386189
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I3db00323c20786713750d13a61b1531d8b1ce7f6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/386087
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
NVMe 1.2 introduced a new Identify Controller field, RTD3E ("RTD3 Entry
Latency"), which allows the device to report the expected time for a
normal shutdown. Use this as the timeout for the shutdown process when
available instead of hard-coding 5 seconds.
Change-Id: I14e7223c81ba397771cf00b49f034f25d21b6e82
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/385301
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_pci_device_claim() can be used to ensure only one process
at a time uses any given PCI device. Previously this was only
used in the bdev_nvme driver - other apps like nvme/perf do
not use spdk_pci_device_claim() and could effectively rip out
the device from a running bdev-based app like the NVMe-oF target.
So instead of modifying all of the nvme apps, put this logic into
the core nvme driver instead so that all applications get the
benefit transparently. Save the fd when the controller is constructed
and then close it when the controller is destructed to handle the
detach (including hotplug) cases.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5dc48a2e41dc06707800f15a9e1f9141477628c6
Reviewed-on: https://review.gerrithub.io/385524
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
For using SoftRoce, there will be packets loss,
so we need to use this value for re-transmission.
retry_count means the maximum number of times that
a data transfer operation should be retried on the
connection when an error occurs.
Change-Id: Ibd81a33d3838bbdf0c054f01666e7ec59bb0a38f
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/382079
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
With this new API, callers can attach one specific ctrlr identified by
the transport ID directly along with optional ctrlr opts. If connecting
to multiple controllers, it is still suggested to use spdk_nvme_probe()
and filter the requested controllers with the probe callback.
Two primary use cases:
1) connecting to the NVMe-oF discovery controller
2) more straightforward way to connect a specific controller (avoiding
the probe callback)
A typical usage of this API with specific ctrlr_opts:
1. struct spdk_nvme_ctrlr_opts user_opts = {}
2. Call spdk_nvme_ctrlr_get_default_ctrlr_opts(&user_opts, sizeof(user_opts))
3. Modify the content of the initialized user_opts with user required value like
user_opts.num_io_queues = 8
4. Call spdk_nvme_connect(&trid, &user_opts, sizeof(user_opts))
Change-Id: Idf67ee5966f6753918c12604342c892d2f3bbe3a
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/370634
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This change is relating to add a new public API spdk_nvme_connect() under
include/spdk/nvme.h. This new spdk_nvme_connect() API will connect the user
specified trid and have a user optional ctlr opts. Rename this API and make
it as public.
A typical usage of this API as following:
1. struct spdk_nvme_ctrlr_opts user_opts = {}
2. Call spdk_nvme_ctrlr_get_default_ctrlr_opts(&user_opts, sizeof(user_opts))
3. Modify the content of the initialized user_opts with user required value like
user_opts.num_io_queues = 8
4. Call spdk_nvme_connect(&trid, &user_opts, sizeof(user_opts))
Change-Id: Ideec8247365ebf7dd15069e29821be8ea27b08be
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/380849
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The newly added UT code will exercise the cases that opts_size is
smaller and equal to the current version of spdk_nvme_io_qpair_opts.
This is for the backward compatibilty when SPDK components are built
as the shared library later.
Change-Id: Ic906d765f5b638070e3d9c8e38827577c625b679
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/380893
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a new parameter for the default ctrlr opts initialization.
This is to make sure future compatibility when SPDK components
are built as a shared library. User's version and SPDK's version
may be in different size.
The change here is to make sure the backward compatibility when
new fields are added in the struct spdk_nvme_ctrlr_opts.
Change-Id: Icfc9640993cb06063b825d4df5835d920dd374e5
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/380846
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A random host ID is generated per SPDK application startup if the user
doesn't specify a host ID during controller startup.
This also changes the default host NQN for NVMe-oF connections to a
random UUID NQN based on the host ID.
Change-Id: Ib0f70dd63e53087716842b412a1f134a9991d4da
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/380528
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This was removed in NVMe 1.2.1 ECN 002.
Change-Id: Icacd53c1f33043cf1c9f30bff1fb9dce1efa69b3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/378681
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK already uses DEFAULT_IO_QUEUE_SIZE and MQES to decide the correct
queue depth of NVMe queue pair, hardcoded it to NVME_IO_ENTRIES(512)
does not make sense if users want to set queue depth bigger than 512.
Change-Id: Iaa73fc79e055292ae9bd19af0c8c12f257ae5c46
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/379052
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use SGL with contiguous physical buffer metadata as the default PSDT
if NVMe can support SGL.
Change-Id: I99192a8b5408f1b034d5112d77d13639b7558f01
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/378699
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_nvme_ctrlr_cmd_io_raw_with_md() will be verified
on Cosmos+ OpenSSD as soon as it will support meta data.
Change-Id: Ib5f3f1f1eba66d0147a566804395bfa5ec959c2f
Signed-off-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-on: https://review.gerrithub.io/377428
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If user specify a trid, we should not attach other ctrlrs
Change-Id: I73a4278c1d7551908feb56d01a1c41c0d049bb91
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/377653
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reason: In our default configuration, we use
nqn.2016-06.io.spdk:init
Change-Id: Ic840b41230f53d5d97166a38faf7c2109fa6b41a
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/377463
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Users don't need to provide nvme debug flag for the error cases.
Change-Id: I00c29e2b8ab470b0233d94acec52b4bec129728c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/376708
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Allow the user to set the source address when connecting to a NVMe-oF
controller.
Change-Id: Ice3add4b2cd3b64fdb8d0d7807d2235f90fd86b1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375837
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Replace SPDK_TRACE_DEBUG with component-specific flags.
Change-Id: Iee7eafab5e6ac8713f247323a18552b5afb0e86a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375834
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This matches the name to the behavior and prepares for addition of a new
log macro for "info" log level.
Change-Id: I94ccd49face4309d3368e399528776ab140748c4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375833
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id2d38779b2178ce56391ac75781c1e41e4a83e1d
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/375130
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Certain vendors do not report correct number of queues allocated in "Set Features/Number of Queues" completion CDW0 per spec.
As a work around, issue "Get Features/Number of Queues" and rely on the value provided there.
Change-Id: Ib9cc4dcf1bdb732413becc751883a7311c6f672f
Signed-off-by: Konstantin Vyshetsky <kon.vyshetsky@stellus.com>
Reviewed-on: https://review.gerrithub.io/375234
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This can be used in callbacks when a user has a namespace but needs to
call controller specific functions such as alloc_io_qpair.
Change-Id: I00c931e2846e42f540c17f3254fe97a45e9bd079
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/375022
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
PAGE_SIZE is the host memory page size, which is irrelevant for the NVMe
driver; what we actually care about is the NVMe controller's memory page
size, CC.MPS.
This patch cleans up the uses of PAGE_SIZE in the NVMe driver; the
behavior is still the same in all cases today, since normal NVMe
controllers report a minimum page size of 4096.
Change-Id: I56fce2770862329a9ce25370722f44269234ed46
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374371
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
An optional field was added in NVMe 1.3 to indicate the optimal I/O
boundary that should not be crossed for best performance. This is
equivalent to the existing Intel-specific stripe size quirk.
Add support for the new NOIOB field and move the current quirk-based
code so it is updated in nvme_ns_identify_update().
Change-Id: Ifc4974f51dcd59e7f24565d8d5159b036458c6e5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373132
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
replaces all references to strerror in the spdk lib directory with
references to the thread safe strerror_r
Change-Id: I80d946cce3299007ee10500b93f7e1c8e503ee41
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/374012
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This also changes the SGL -> PRP case to translate each 4K page from
virtual to physical, in case the buffer is not physically contiguous.
Change-Id: If027f9d656c52c56504f0c64cd4464e16440df63
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/371616
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Unmapped blocks on some older nvme devices will read zero even if the
device does not explicitly define the unmap behavior.
Change-Id: Ia825a406cbd01f89192c300cfe35013fb4aed715
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/372006
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Ia45d356fbc2c4baea86a96eb28264f104f593a9c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373156
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The value for lba_count is stored in a 0-based 16 bit register. here we
confirm that the value passed to that register is no larger than 2^16.
Change-Id: I234e55fc2b61338444dfe8f734e76f958d1f0443
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/372370
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
1) Rename _nvme_ns_cmd_split_sgl_request to
_nvme_ns_cmd_split_request_prp.
2) Add _nvme_ns_cmd_split_request_sgl. This
function will be used with controllers that
support SGL, to make sure the request does not
span more SGEs than the controller or supporting
software supports.
While here, add a useful error message for both
the prp and sgl cases, if the child_length is not
an even multiple of the lba size.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifd04aee3c571359009260fe46400ce1844511aa3
Reviewed-on: https://review.gerrithub.io/372359
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
For pcie, this just equals the number of SGLs we can fit
into the per-tracker memory.
For rdma, this is just set to 1 for now since nvme_rdma.c
does not support multiple SGEs yet. Once that support is
added, this will change to use MSDBD (Maximum SGL Data Block
Descriptors) instead from the controller identify data.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I34a4c546b5ff46918a296a73ed8cbcc6c9879d5a
Reviewed-on: https://review.gerrithub.io/372358
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Requests may need to be split in which case a child
request may have a size smaller than the SGE that
contains the child request's payload.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6c7ab76104d56fa9dde168cfdddb6320c7157f98
Reviewed-on: https://review.gerrithub.io/372347
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For ioq, target is supposed to respond with the same
cntlid as specified in the connect capsule, but the
Linux kernel target doesn't actually do that. It really
only needs to be set on the adminq connect, so just
do that.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4eec605f856bdad2c8614d505241566a9fe292ab
Reviewed-on: https://review.gerrithub.io/372345
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The Linux kernel NVMe-oF target can easily be misconfigured to report
newline-terminated strings from the discovery service, since its
parameters are set by echoing into sysfs files, and echo adds a newline
by default.
Newline characters are not allowed as part of the TRADDR and TRSVCID
fields, since they are defined as ASCII strings in the NVMe specification
sense, which limits the acceptable characters to the 0x20-0x7E range.
However, we can add a workaround for misconfigured targets with trailing
newlines that shouldn't impact any valid configurations.
Change-Id: I5db183d5637128fa8d50c245f4bfa965cc3ce8e2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/370593
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2b6a22591d0a5f7435d9fd9dd8d6a1c854da3d89
Reviewed-on: https://review.gerrithub.io/371978
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Add a new struct spdk_nvme_io_qpair_opts to allow the user to override
controller options on a per-I/O qpair basis.
Existing callers with qprio == 0 can be updated to:
... = spdk_nvme_ctrlr_alloc_io_qpair(ctrlr, NULL, 0);
Callers that need to specify a non-default qprio should be updated to:
struct spdk_nvme_io_qpair_opts opts;
spdk_nvme_ctrlr_get_default_io_qpair_opts(ctrlr, &opts, sizeof(opts));
opts.qprio = SPDK_NVME_QPRIO_...;
... = spdk_nvme_ctrlr_alloc_io_qpair(ctrlr, &opts, sizeof(opts));
Change-Id: I8ac3ea369535cfde759abbe75e1d974b6450a800
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/369676
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
gai_strerror() is documented as thread-safe, so this should be safe to
use from a library.
Change-Id: Ia0ec0b5c387db8993dd1ba3a3029562f25cc210d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/369642
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Support both SPDK_NVME_FW_COMMIT_REPLACE_IMG and SPDK_NVME_FW_COMMIT_REPLACE_AND_ENABLE_IMG.
Return code will specify if conventional reset is required.
For now, return error if subsystem reset is required.
Change-Id: I41a05675a210dd0bbf170517b32ee9e05da9a797
Signed-off-by: Isaac Otsiabah <iotsiabah@us.fujitsu.com>
Reviewed-on: https://review.gerrithub.io/367287
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5b77212335e2f10ce263dc59baad87236b98048a
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/367305
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also add adrfam to the NVMe bdev JSON config output.
Change-Id: I9472bda04947cffc0df9b02eba0035bac01b7d7b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/367292
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Nothing in the spec indicates that NQNs should be case insensitive, and
we have fixed this elsewhere (e.g. commit df70bc1559: "nvmf: use
case-sensitive comparison for NQNs").
Change-Id: I4a48d1c7f25ec5af9ce4d73f1bf2fa543236503a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/367106
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I6010465d573decd93ddf9881392b3d807cd52918
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/366663
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
PCIe transport IDs are a non-standard extension to the NVMe-oF transport
address, and they only use the transport type and address fields of the
structure. Add a special case so that the rest of the fields are
ignored for PCIe addresses. All other transport types are NVMe-oF
addresses and should compare all fields.
Change-Id: I45ed143ea1712d17c6de8082677deeefd395c8a2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/365916
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Sync the spec header with the major changes for NVMe 1.3.
Some of the added fields may have been added in previous
versions of the spec.
Change-Id: Ia50a52f5192cf450bb5cc2d18fcc1f92ebce7f77
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/362046
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I941a4cb5563cebb2e68b48d3a74b4b73af0e9657
Reviewed-on: https://review.gerrithub.io/365662
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I1e272c63a5d863c92f1aa8299a9d98dcb72d0b13
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/365082
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
These commands should be treated as aborted by spec,
so correctly deliver abort notifications when a
qpair is deleted.
Change-Id: I8af47a3f42f5695ef8e1a70813662e69102720b2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/364681
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Preivously, we can only get part of the log page
entries due to the limitation of buffer. With this
patch, we can get all.
Change-Id: I81b8afc73c108dac65d1ff5fe8d03bda41fa29a1
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/363323
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also provide an option in perf tool let users to
disable it.
Change-Id: If4952513d77cecaa4f9403fbea811d86916ee87c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/363311
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
- rename spdk_malloc_socket to spdk_dma_malloc_socket
- rename spdk_malloc to spdk_dma_malloc
- rename spdk_zmalloc to spdk_dma_zmalloc
- rename spdk_realloc to spdk_dma_realloc
- rename spdk_free to spdk_dma_free
Change-Id: I52a11b7a4243281f9c56f503e826fd7c4a1fd883
Signed-off-by: John Meneghini <johnm@netapp.com>
Reviewed-on: https://review.gerrithub.io/362604
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
An ECN to the NVMe 1.3 specification has clarified that the NQN may
contain 223 bytes before the null terminator. Make all of our NQN
length checks consistently enforce this behavior.
Change-Id: Iebfd57d11abea64964c7a6ad9d886e40efa243c3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Unit tests will be added as part of a separate patch updating all UT for
nvme.c. Global used for timeout value so it can be easily overwritten
by the upcoming unit tests for this function.
Change-Id: I7fc15aab91601ac57c94cae266b212c0998d2495
Signed-off-by: paul luse <paul.e.luse@intel.com>
The VirtualBox emulated NVMe device will intermittently
hang on the first read/write command after an I/O
qpair has been allocated. The frequency of the hang
diminishes if a delay is added after allocating the I/O
qpair - until it disappears completely with a 100us delay.
So add a quirk to insert this delay.
Note - the 100us delay was tested by running
the hello_world example app 50000 times.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I237e31b1b8a1a1e28262851ae0a21cd7345f0f1a
Fixes a scan-build warning about using qpairs after they have been
freed.
Change-Id: I263eabd6b784acf540c66136965f7705ef110a78
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Fix up the existing comment blocks misaligned in the first column.
Also add line numbers to the comment checks.
Change-Id: I9d28c365271df36e7013d74cbb02d0023ab4f581
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
A 100us is so small that applying the quirk to the specific
SSDs that require the delay is more trouble than it is worth.
So remove the quirk and always wait 100us before re-enabling
the NVMe SSD during initialization.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id6a8cc6e35d103fffdf135580301fc3e5b27e722
Also avoid an spdk_get_ticks() call in the default
case where a timeout_cb_fn is not defined.
On my Intel(R) Xeon(R) E5-2699 v3 system with an
Intel(R) P3700 SSD, these modifications reduce software
overhead per I/O by 3-5% (as measured by the SPDK
overhead tool).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5bb5a87747b15d9e27655fabcd2bc1a40b0b990e
Queue aborts that would exceed the abort command limit
in software as a convenience for the user.
Change-Id: I8c1f0380984cc6c0cdb453db961939a7f571b336
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Instead, pass NULL when an ADMIN command times out.
We don't expose the admin queue to the user.
Change-Id: If0768d329a689f6f7c3734c9d419e680d7378ed1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
For each command that times out, call the timeout
callback one time if the user registered one.
Change-Id: Iaad39a886468e89bef63fe292c5cad1dce97a57c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
It has been discovered that some devices require
a very small delay before writing CC.EN to 1 after
CSTS.RDY goes to 0.
Change-Id: I73d31726d17ebf5bbec7ee528e2f98fcd05234dd
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This isn't the indentation pattern I would have chosen, but
it's a complicated negotiation between what I want and what
astyle will let me get away with.
Change-Id: I4909587823931842ac3f227134e1d05e7d80da74
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Any Intel device reporting device ID 0x0953 needs this quirk.
Change-Id: I690b01ecf05105df00ec8cf6f2da7f7c0a601aa8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This prevents a deadlock if the user immediately
calls spdk_nvme_detach.
Change-Id: I79f28abe163cbbf184bea907692c44aa4e1c8893
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The message about the uevent socket is not a fatal error; it just means
that hotplug monitoring will not work.
Change-Id: I29f6a253e96a86420c0fde9e19135f9f1d229bb9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
remove the unnecessary rte_eal_pci_probe_one() in function
spdk_pci_device_detach(), this could cause error message when we
terminate the application, it will also not make sense try to probe one
device after we detach it, we could call spdk_pci_nvme_device_attach()
instead of spdk_pci_nvme_enumerate() when we have one given device address,
dpdk will try to scan the device and add it back to pci device list then.
Change-Id: I35f5bb412249bb20da57394f0531c10a49691906
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Register all spdk_malloc() memory regions as ibv_mr in a spdk_mem_map
so we can look up the RDMA key for the user's buffer and pass it in the SGL
directly, rather than copying through a pre-registered bounce buffer.
Change-Id: I7340bc2020b5256750c95dbd24ba67961404e5e7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The extended LBA format flag should be initialized after namespace
capability flag.
Change-Id: Iad479b454bb4e31120c17d40ae23937a099c6f8f
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
The send completions must be processed prior to the
recv completions. However, if the completion queues
are separate this leaves a small window where
a send+recv completion arrive between polling
the send_cq and the recv_cq, resulting in the code
seeing the recv completion prior to the send
completion.
By combining the completion queues, this eliminates
any potential gap. The send completion will always
be processed before the recv completion.
Change-Id: I06bfef6af48559d0b9e00524ebc10f1a102e7387
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The actual uses of intrinsics are already guarded by feature-specific
ifdefs in nvme_pcie_copy_command(), but the header itself should also
only be included when it will actually be needed.
Change-Id: Ife65d6432b8dfd9d9db80fe4e385ab76491874c0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
These allocations need to be from memory registered with the SPDK env
library to allow future work on automatic ibverbs memory registration.
Change-Id: I6ec6999ecd6d6bf6ba4ab159630f7d01f3d46154
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This can be used for issuing an abort for the timed-out command.
Change-Id: I3c5727fdddc156cd7c8f99afbc3e6da8e73bba56
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move the ibv_recv_wr initialization in
nvme_rdma_alloc_rsps. Thus we can save some
CPU times
Change-Id: Id449b2684290431f8b3ba97ec4058171d34038bf
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
We do not need to set it for submission since the contents
are same
Change-Id: I345094e2e8a858b318be73d28f09393566587d95
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Move cb_arg to the first argument to match the other NVMe callback
function signatures.
Change-Id: I4e699c8071dcb7ba4ce3cdb82ee985600208204c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This has been reported for a number of different device
types. We suspect these devices are technically out of
spec, but they work with most other available NVMe
drivers on accident.
Change-Id: I529cfc03fc314cbab2a1cd40620bf1dd5b54182d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
For namespaces with end-to-end protection information, metadata size
of exactly 8 bytes, and extended LBA configured, the NVMe driver would
calculate the size of the data block incorrectly. The NVMe spec has a
special provision for this specific case (8-byte metadata only) and
PRACT = 1 that requires that the host does not send the metadata as part
of the host memory buffer.
To fix this, clean up the calculation of the per-block data transfer
size by adding a new extended_lba_size field in the namespace, which
represents the total size of data to be transferred per block based on
the namespace's configured metadata size and whether it transfers
metadata as part of the data buffer. Then add the special case for
PRACT = 1 and PI configured and extended LBA in the R/W helper
functions.
Change-Id: I0b383a58c773cac06e6c018858b57129064c6059
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
These were repeated a few different places, so pull them into a common
header file.
Change-Id: Id807fa2cfec0de2e0363aeb081510fb801781985
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This removes one addition from the submission path (negligible, but a
nice side effect), but also opens up the possibility of reporting the
total time an I/O took - since we are always tracking the submission
time anyway, there is no extra cost to report it in the completion
callback.
Change-Id: I7129e7c09d20da8082042a7622d045846461dd9c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
For infinite timeout states, instead of printing UINT64_MAX as a
decimal number, interpret it as "no timeout" instead.
Change-Id: I579f5857f96286734940ab5f493261e60354c4fe
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The PCIe transport initializes the quirks directly, so the generic hook
to get PCI ID is no longer necessary. This path was dead code.
Change-Id: I25bdaa598db53e4312a264d9d8356d1b416696e5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The logic to fail queue pairs when the controller is failed should be
handled in the generic code, not in the individual transports.
This also allows nvme_qpair_fail() to be private to nvme_qpair.c.
Change-Id: I6194576dceb35073b9af8847e59314900028637c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is more CPU efficient than only grabbing one
completion per call to ibv_poll_cq.
Change-Id: I0c70d33639f0f345482d9e7c810f9c6723937058
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
In our previous code, we did not ack the event in
exceptional cases when we get a event via rdma_get_cm_event.
Thus, the code may block with in this statement:
rdma_destroy_id(rqpair->cm_id);
in some exceptiaonal cases. And this patch will solve this
issue.
Change-Id: Iddb6fb5356a5ee0ed04e261a040ba53042fca302
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
This make sure the qpair failure could be started from upper level application.
Change-Id: I7e04fe36929cc634ddf0078db96fbc40afb38f8c
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
The g_thread_mmio_ctrlr should be not NULL pointer when it enter the
handler function.
Change-Id: I45dba601c672b16e2c6feafd9059bafde0d8f1b4
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
If namespace is formatted with per lba metadata feature and also disable end-to-end protection
feature, host couldn't use per extended-lba metadata area.
Signed-off-by: Zhihao Zhang <thomas.zzh@alibaba-inc.com>
If the user asked for a specific PCI address in spdk_nvme_probe(), we
need to return 1, not 0, for the other PCI addresses that don't match
when enumerating. 0 means to attach the PCI driver, whereas 1 means to
continue enumerating.
With the previous behavior of returning 0, all NVMe devices would be
attached to the DPDK PCI driver, even if the user did not request for
them to be probed, and further calls to spdk_nvme_probe() would not find
any devices.
Change-Id: Ifbbcd7d1abe8ab535b6957855172e66a3e69fbe4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Currently we use the pci functions provided by DPDK,
it identifies the device by class id related
info but not by pci bdf info, so we can add the filering
by pci_addr in pcie_nvme_enum_cb function.
Change-Id: I5942e98853f00fc10fa6aae5c113517653d1b357
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Since nvme_ns_cmd.c now walks the SGL, some of the test code
needs to also be updated to initialize and return correct values
such as ctrlr->flags and sge_length.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I521213695def35d0897aabf57a0638a6c347632e
Preivously, we only supports probe the NVMf target
via discovery info, now we can support to directly
to connect it.
Change-Id: I08ce1d95de6744286357e68b48c97b773b902ac8
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
(1) Add nvme_rdma_build_sgl_request function
(2) Merge nvme_rdma_pre/post_copy_mem to nvme_rdma_copy_mem
Change-Id: I86abab821b32b4da0aa9489a6b9f7dc430333159
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Now that the hotplug code is isolated in nvme_pcie.c, it can call the
PCIe transport attach function directly.
Change-Id: I2df3b9168473b537cc9b13367e06d3d3b6fa22be
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The spdk_nvme_qpair::num_entries value is never used in the common code,
so move it to the individual transport qpairs to make it clear that it
is a transport-specific implementation detail.
Change-Id: I5c8f0de4fcd808912ba6d248cf5cee816079fd32
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The definition of SPDK_UNREACHABLE uses the build-time DEBUG definition,
which is not available in the public API.
Change-Id: I1862c99fa5c85ccd3483f94e9c35de531da57f3c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Instead of passing the work completion, just pass the
response index. This keeps the work completions localized
to the polling function.
Change-Id: I0e6a1d8564200b5ac3aa43dfd58ae152d439bbd8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This eliminates an if statement, since the two callers
of this function know the desired queue size.
Change-Id: I28fabac8613f7b8fc7d96cf95b085b6e4dcf985f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Just call the regular qpair create function instead.
Change-Id: Ic35b1eb6fcdf0d82733ea573a493f583dd63d5bd
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Use the num_entries value in the generic qpair instead. These
values had to match anyway.
Change-Id: Ia6400fbaba97df3ef6db4dc07a2ab95af1e5143f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Avoid an extra level of pointer chasing when we are filling out the NVMe
SGL.
Change-Id: I1a40af16fda80f7480c419524876bfb1a1902eb8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This will allow it to be better be reused for some future patches
enabling splitting of non-PRP-compliant SGL-based requests.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ica38fd6cf191f72baa524bcc4896b3c9939ab762
This intermediate function is no longer needed.
Change-Id: I3523cc6d8f3b290165a953d42cca8b76eda762c5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Sending the fabric connect command is part of establishing
a connection, so move it into the main connection-establishing
function.
Change-Id: I55e7ffdd16b576c81b51d7d3910203f9afc1f4c2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This function initializes the members of an existing
qpair struct. It doesn't construct one from scratch.
Change-Id: I0b9afac1ad25cfb217efd146702f693c74f5f697
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
No need to allocate all of the requests and responses until
we know a connection can be established.
Change-Id: I072a10aadfd7ced773634448f7d7e788622d0a4c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The code is clearer if this function is incorporated
into its only caller.
Change-Id: I33901cddf80ae27896b2acfd1b9e7d212f21f5f3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This is resolving the address and route to the target, not
binding a socket to an address.
Change-Id: I80055481ed2e020410a1e186a4e7371b60faaee9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
They were very close to the same already, so finish the job.
Change-Id: Ifba9e3b2d11a3e70cbfbe46f57a67552db2757ed
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
We should be sending the bounce buffer's remote key to the target so it
can put it into an RDMA SGE on the remote side.
Change-Id: Icded155ad2292c67baa722f001c9c07178bc2754
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
There is no particular reason for this to be 127; make it 128 to at
least be consistent with the PCIe transport.
Change-Id: I60500e0044d3549ba6350e1f35f09d624848bd21
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This function was only called from one place and saved no
lines of code.
Change-Id: If5e653732df57c1f2c93e20cf4f286eac31df91c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This matches the behavior of nvme_pcie, which queues a request if no
tracker is available.
Change-Id: Idbf6c951c89451cfea22ec6bc553ff46f988f818
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make the caller pre-allocate an rdma_req and change req_init() so it
only does initialization, not allocation.
This is necessary to distinguish between rdma_req allocation failure and
other types of failures, which will become important in future patches
when requests will be queued if rdma_req allocation fails.
Change-Id: Ie6edebc1b5f05001b42fc959a29ce0ea6875e41e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Simplify the control flow and match the name of the function to its
purpose.
Change-Id: I65bad7e3b2ef710ca29eff9799b8dcaae3999315
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make the qpair construct functions private to the transports - it
doesn't need to be called from generic code.
Change-Id: I5f730a4bcf60ce231fe27bc8f4c3c39cb647dd2d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add a transport callback to return the maximum queue size, and enforce
it in the generic nvme_ctrlr layer.
This allows the user to tell what io_queue_size was actually selected by
the transport via the ctrlr_opts returned during attach_cb.
Change-Id: I8a51332cc01c6655e2a3a171bb92877fe48ea267
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Equivalent to commit 6ab28a201b except now
for commands instead of responses.
Change-Id: Ibe4382dc0f65c1b90c2cee2ad285bbdd21b96a89
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The only field of bb_sgl that was actually used is lkey, and that is
already stored in bb_mr.
Change-Id: I790369a06ce223f88e356df20a9d9a74a93ff225
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Refactor the discover log page processing into a loop that calls a
function for each log page entry. This sets us up to add support for
multiple Get Log Page calls to handle larger discovery service lists.
Change-Id: I85676ada375d0dadda2a3f4ab6331123ac7aaf60
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This isn't used yet in the NVMe library, but it will be necessary later
for supporting non-IPv4 addresses.
Change-Id: I167ce63ad25b0e0c9aa192b12d764c8d078e67f9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This better describes what the field controls (it does not affect the
admin queue size).
Change-Id: I851ae46fb4ed0fce819af07ae235824e0fc817e6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
For requests split in _nvme_ns_cmd_split_request() the payload offset is
set after children are created using recurrent call _nvme_ns_cmd_rw().
This makes impossible to reset SGL to proper offset in
incomming patches that split non-PRP complaint SGL requests.
To change this the payload offset is set after each request is allocated
in _nvme_ns_cmd_rw() not in _nvme_ns_cmd_split_request().
Change-Id: I9d3b2e3bbd9d93a4c8a37e1db8c4e01276e2cacb
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
This is preparation for handling non-PRP compliant SGL.
Change-Id: I445790f9802292971256cf821d9730814c95a073
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
This is preparation for handling non-PRP compliant SGL.
Change-Id: I49c3745498411c5ff9e17cd08f181d4d434c2d08
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Don't leave garbage from previous discover entries in the trid we are
returning to the user.
Change-Id: I60ae5932db4a95cedb8df1ff98a2479220b55ce4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The other simplifications to probe_info and trid made the
trtype argument redundant.
Change-Id: Ie7bea4e2204e690dc4909eeacd065e0722b53272
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The probe_info was reduced to just containing a
transport_id, so remove probe_info entirely.
Change-Id: Ica9a22d126cd14e282decd3eea1a0afe0460f099
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This can be obtained by parsing traddr into a pci_addr,
then getting a handle to the pci_dev and asking for all
of the pci information.
Change-Id: I1948cbd3ec65611293192ef5558ace19dd444d4c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This bug was preventing multiple calls to spdk_nvme_probe() from
working, since the first call would return 0 from all of the DPDK driver
init callbacks and prevent other devices from ever being enumerated in
subsequent calls.
Reported-by: Tsuyoshi Uchida <tuchida@us.fujitsu.com>
Change-Id: I871aa170bbd03be111604eeabe3a7a7a4f40ce89
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use the standard quirk mechanism to specify which devices
need software assisted striping.
Change-Id: Id8156876a90b4caf9d687637e14c7ad4a66ceda6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This way, all new controllers discovered will be initialized
in parallel.
Change-Id: Iebedb3905eb2787a3708f74425afae40ca31253d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
If the first call to spdk_nvme_probe probes a device and
the driver elects not to take it, still call the probe
callback for that device on subsequence calls to
spdk_nvme_probe.
Change-Id: If06467cf6796c827a0bbfba6e36d5b91534526fc
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Move this down a level so it happens on all paths.
Change-Id: Iea9913f0e102353882466c8dea4ee39abb857520
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Scanning the transport may result in both new
devices and removed devices, so pass the callback
for both operations.
Change-Id: I6f73dbe6fd7cf61575c354b43f8ae3e2a01e2965
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Simplify the arguments to nvme_transport_ctrlr_scan to take
a transport id that identifies the discovery service (or
NULL to scan PCIe).
Further, separate scan into two functions - scan and attach.
Scan is for scanning an entire bus, attach is for a specific
device.
Change-Id: I464f351a02a04bc5a45096dcf5dc8fc5ac489041
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Instead of repeating the fields, just embed a transport_id.
Change-Id: I282704c9d59784abd5f7c93be4e47c673fcf6dde
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This is a small step toward making discovery more like
scanning a local PCI bus.
Change-Id: Ie7149ad060f2eeb56939b1241187bdf09681f2aa
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Before adding readv/writev support in nvme_rdma,
using this patch.
Change-Id: I25ff0df61d0346f22560d011158d7f80e72007ea
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
NUMDU was added with NVMe 1.2.1 and allows a larger log page size to be
described.
Change-Id: I1a4ac42393c1a21175b3564980d56b6e7a6ae80d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The NVMe over Fabrics transports should already be setting this in the
initial admin queue Connect command, so setting it again is not useful.
The kernel NVMe over Fabrics target additionally has a bug in the Set
Features - Keep Alive Timeout handler (it is extracting the KATO value
from the wrong offset in the command), so this works around the kernel
bug by not sending the Set Features command at all.
Change-Id: I0d7f09b71fcea116acf8810c5880157bb9315a04
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The reason is that kernel nvmf target will check the
value. If not set, it will fail the other commands later.
Even for discovery ctrlr, kernel nvmf target will
check the cc value.
Change-Id: I998327f91ba96281d261952878eb84d648a823da
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
It's not the whole transport - it's just an enum for the
type of transport.
Change-Id: Ia435a21792f221ddf50ddf4f0923c6152622eccb
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change it according to the spec thus we can test
kernel nvmf target
Change-Id: Ica98dd40503a40c0f0de8efaefb1f6f67a89cde8
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change the PCI enumeration API to individual functions per device type
so that only the drivers that are actually in use get linked into the
final executable. All of the common code is still shared internally in
the env_dpdk library.
Change-Id: I2ba83afe59202a510f999a0674e23e60b6581221
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The user's remove_cb should detach the NVMe controller when it can
ensure that it is no longer in use. In the interim (between remove_cb
and spdk_nvme_detach()), the controller will remain in a failed state,
so any new I/O submissions will return an error code but not crash.
examples/nvme/hotplug is not yet updated for this change, but that will
be done in a separate patch.
Change-Id: I8827ba36f9688ccb734e7871f20f11ec11e88f96
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
While we're here, fix up typos and add error logs for all error exits
in nvme_rdma_qpair_connect().
Change-Id: I236fe6571c2012ca047aa8a447638d9227454c2f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This version of multi-process support needs to have DPDK 16.11 builtin.
Change-Id: I3352944516f327800b4bd640347afc6127d82ed4
Signed-off-by: GangCao <gang.cao@intel.com>
The discover and probe 'nqn' fields are subsystem NQNs, so name them
subnqn to be consistent with the spec and the rest of the code and to
distinguish them from host NQNs.
Change-Id: I4a80fbc1f4b037c8a4f91c8f28d2a96e47c66c47
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Allow the host NQN to be overriden when connecting to NVMe over Fabrics
controllers.
Change-Id: I8fcf2e89ae7d9722677e834f76a8fe805c52f91b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This makes the function and file/line info actually useful (instead of
pointing to the helper function itself).
Change-Id: I22bac68827115880a49d456706a7eaecdc12e9b5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Each transport should handle its own qpair cleanup internally.
Change-Id: I7dd737be820ea6bad686f4aad7d74044fad58a47
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Let the transport access the controller options during
ctrlr_construct().
Change-Id: I83590c111e75c843685dd9315f0f08416168356d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
nvme_rdma_req_get() is an internal function, and its only caller already
checks for a valid rqpair, so the NULL check is unnecessary.
Also clean up the redundant STAILQ_EMPTY/STAILQ_FIRST logic and use
STAILQ_REMOVE_HEAD.
Change-Id: Ic3828e8b5e881879173cb59350e39c5fac90e6ef
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
nvme_rdma_pre_copy_mem() does not have any failure cases, so remove its
return value and remove the never-taken branch in its only caller,
nvme_rdma_qpair_submit_request().
Change-Id: I91011734ed0c20f8db691d62172fe1a3021dd3a1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
nvme_rdma_req_put() is an internal nvme_rdma.c function, and all of the
callers already have the rqpair, so pass it directly. We also already
verify that all of the callers have a valid rqpair and req before
calling nvme_rdma_req_put(), so it doesn't need to check for NULL
pointers.
This also means that spdk_nvme_rdma_req doesn't need to hold a pointer
to its rqpair anymore.
Change-Id: I893a46a9074f0a843e379d10c123f9292eb3b1a4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The only place where outstanding_reqs was checked was in
nvme_rdma_req_put(), but the error case there could only happen if some
kind of internal programming error occurred (e.g. calling
nvme_rdma_req_put() on an invalid request).
Change-Id: I71e40ce562a8720dfaf70437ffd4c6493327c091
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
nvme_rdma_ibv_send_wr_init() was only called in one place, so just move
its contents into nvme_rdma_qpair_submit_request() since it allows
simplification of the code:
- req was always NULL, so remove the code that used req entirely.
- wr and sg_list are never NULL, so remove the checks for those.
Change-Id: I12a4f3502219d3681607686945e343f6808c0d2f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
We currently don't handle discovery service referrals, so skip those, as
well as any other unknown subsystem type.
Change-Id: I64f889e9272fb57b5cf9bb5467b3abca3955baf5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
QEMU's virtual NVMe controller device does not support the AER Set
Feature, so ignore its failure and continue.
Change-Id: I8b5c217a3112edabb6f76ec3e5f4ef774981a1d7
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Catch SIGBUS and handle it by remapping new memory into the
location where the BAR previously was.
Change-Id: Ie8d00a60a0bbe7f7ec57a5c39c0a63c5d9443206
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
These functions will attach or detach from a PCI device. Attaching
typically means mapping the BAR.
Change-Id: Iaaf59010b8a0366d32ec80bb90c1c277ada7cfe7
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
spdk_nvme_probe frees ctrlr when nvme_ctrlr_process_init is failed. But
ctrlr has already been freed while calling nvme_ctrlr_destruct. So
spdk_nvme_probe doen't need to free ctrlr.
The generic NVMe library controller initialization process already
handles enabling the controller; the RDMA transport should not need to
set EN itself.
For now, the discovery controller is cheating and not using the normal
initialization process, so move the EN = 1 hack to the discovery
controller bringup until it is overhauled to use the full
nvme_ctrlr_process_init() path.
The previous code where CC.EN was set to 1 before going through the
controller init process would cause an EN = 1 to EN = 0 transition,
which triggers a controller level reset.
This change stops us from causing a reset during the controller
startup sequence, which is defined by the NVMe over Fabrics spec as
terminating the host/controller association (breaking the connection).
Our NVMe over Fabrics target does not yet implement this correctly, but
we should still do the right thing in preparation for a full reset
implementation.
This patch also reverts the NVMe over Fabrics target reset
handling hack that was added as part of the NVMe over Fabrics host
commit to its previous state of just printing an error message.
Change-Id: I0aedd73dfd2dd1168e7b13b79575cc387737d4f0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Most of the NOTICE level messages should have been TRACE.
Change-Id: Icbc4d398ab2580cf3a2349be11441b7a09603020
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Verify that qpair is not NULL before doing pointer math on it.
The NULL check after calling nvme_rdma_qpair(qpair) would not
trigger if qpair was NULL.
Fixes a crash if the Connect command failed, causing
nvme_rdma_ctrlr_create_qpair() to return NULL.
Change-Id: I158a5b1752892a7d5a72a9ac20c0c5b2cd781a81
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The status.done flag polled by nvme_ctrlr_set_keep_alive_timeout()
was never initialized.
Change-Id: I323fae5f4ce12209a9699965ce07894bc3c6205a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use the NVMe over Fabrics spec definitions for TRTYPE rather than the
internal library transport type.
Change-Id: Idead559a8f8d95274fc580d10e82033822e6eda8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
These need to be available for the lifetime of the probe_info structure,
so they can't be pointing at e.g. temporary buffers on the stack.
Change-Id: I5aaa898acf9314aab51600dd756f966965d37fd0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
It always points to the same internal RDMA request complete function, so
just call that function directly.
Change-Id: Ic1fb6236bf43eaad62413df77d43be9ab855e5c7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
We can't transfer more than the bounce buffer in a single command, so
report that rather than some bogus value.
Change-Id: I39b147916dcc2ee478470917298763a239a6a35a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Record the user-provided asynchronous event configuration set via Set
Features, and return it in Get Features.
This value is not actually used, since AER is not implemented yet in the
virtual controller model, but it at least implements the mandatory
Set/Get Features.
This allows the hack in the NVMe host code that ignored the Set Features
failure to be reverted.
Change-Id: I2ac639eb8b069ef8e87230a21fa77225f32aedde
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Fill in the cached copy of CAP in the generic NVMe controller to match
the PCIe transport.
This is not really early enough, since CAP is used during the reset
process to determine the reset timeout, but that will have to be fixed
separately by rearranging some of the transport callbacks.
Change-Id: Ia8e20dbb8f21c2871afb9e00db56d0730e597331
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make sure the entire NQN field is zero-padded, rather than using
strlen() on the input.
Change-Id: Icee68bd033feed057813beeb30cec102ed90840e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This fixes a compiler warning about unhandled enum cases in a switch.
Change-Id: Icecb56b47a05c13f390f03b877f8eae243b481a6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
- add SPDK_NVME_OPC_KEEP_ALIVE to admin_opcode
- add SPDK_NVME_SC_INVALID_SGL_OFFSET, SPDK_NVME_SC_INVALID_SGL_OFFSET,
SPDK_NVME_SC_HOSTID_INCONSISTENT_FORMAT, SPDK_NVME_SC_KEEP_ALIVE_EXPIRED
and SPDK_NVME_SC_KEEP_ALIVE_INVALID to generic_status
The SPDK_TRACELOG macro depends on a CONFIG setting (DEBUG), so it
should not be part of the public API.
Create a new include/spdk_internal directory for headers that should
only be used within SPDK, not exported for public use.
Change-Id: I39b90ce57da3270e735ba32210c4b3a3468c460b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Considering the process can be terminated in the cases like ctrl+c,
kill command or memory fault, the ref is tracked in the per process
structure spdk_nvme_controller_process and whenever there is other
process attaches or detaches the controller, a scan will be issued
to cleanup those unexpectedly exited processes.
Change-Id: Ib4f974f567a865748d42da4ead49edd383dfc752
Signed-off-by: GangCao <gang.cao@intel.com>
Instead of the next_sge callback returning the physical address
directly, make it return the virtual address and convert to physical
address inside the NVMe library.
This is necessary for NVMe over Fabrics host support, since the RDMA
userspace API requires virtual addresses rather than physical addresses.
It is also more consistent with the normal non-SGL NVMe functions that
already take virtual addresses.
Change-Id: I79a7af64ead987535f6bf3057b2b22aef3171c5b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Function pointers will not work for the DPDK multi-process model (they
can have different addresses in different processes), so define a
transport enum and dispatch functions that switch on the transport type
instead.
Change-Id: Ic16866786eba5e523ce533e56e7a5c92672eb2a5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The initialization of dev_addr was replaced with probe_info.pci_addr,
but its use in spdk_pci_addr_compare() wasn't replaced to match.
Fixes commit fcb00f3780 (nvme: expand
probe information to a struct).
Change-Id: Ic4c273d2aa0bf1f9e3e1527f3ab09d3c019158cd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_nvme_probe() will now provide a struct spdk_nvme_probe_info to the
probe and attach callbacks in place of the PCI device pointer.
This struct contains the useful information that could be retrieved from
the PCI device during probe.
The goal of this change is to allow expansion of the probe information
in the future when other transports (specifically, NVMe over Fabrics)
are added that do not necessarily use PCI addressing or device IDs.
Change-Id: I59a2a9e874e248ce5fa1d7f4b57c8056962ff3cd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use the new public PCI ID structure in the NVMe library to replace the
previously private struct pci_id.
Change-Id: I267d343917f60bdae949a824bc0fe67457cbbc0d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
- Split the part that gets a PCI device's address into its own function,
spdk_pci_device_get_addr(). This is useful outside of the comparison
function and is orthogonal to comparing addresses.
- Make the comparison function take two addresses instead of a device
and an address. The more general form will be useful with addresses
that are not directly associated with a device. Because of this, also
rename the function from spdk_pci_device_compare_addr() to
spdk_pci_addr_compare().
- Return a signed value similar to strcmp() so that addresses can be
ordered, not just compared for equality.
Change-Id: Idf304454af09ea57f1e1d5dc3a39b077378cecad
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add a field to struct spdk_nvme_ctrlr_opts that allows the user to
specify a keep alive timeout, and add automatic submission of Keep Alive
commands to spdk_nvme_ctrlr_process_admin_completions().
Change-Id: Ib282299a571d8edc59c7933418751bc3a6c98b40
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make the quirks mechanism generic in preparation for quirks for devices
from other vendors.
Change-Id: Ic003b020a38f1b966021db30e3f2bce9cf6a1a0d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add a transport function to get the max data transfer size to break the
dependency on NVME_MAX_XFER_SIZE.
Change-Id: I846d12878bdd8b80903ca1b1b49b3bb8e2be98bb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move the PCIe-specific admin queue setup to nvme_pcie_ctrlr_enable.
Change-Id: Ic3f5625fa804f719040ba86b7fc3bf82fcc057c0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The value of CAP should not change during the lifetime of a controller,
so read it once during ctrlr_construct and store it in the ctrlr.
Change-Id: I089d4141b4e0c9aae6c53abf9bb0ef6577dabe0b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Rather than embedding adminq directly in the spdk_nvme_ctrlr structure,
change it to a pointer to a spdk_nvme_qpair. This is necessary to allow
the transport to extend the qpair structure.
Change-Id: I041685d5037088cf56d046fe99bf204edcfc57b1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This requires a couple of related changes:
- I/O queue IDs are now allocated by using a bit array of free queue IDs
instead of keeping an array of pre-initialized qpair structures.
- The "create I/O qpair" function has been split into two: one to create
the queue pair at startup, and one to reinitialize an existing qpair
structure after a reset.
Change-Id: I4ff3bf79b40130044428516f233b07c839d1b548
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make the transport ctrlr_construct callback responsible for allocating
its own controller.
Change-Id: I5102ee233df23e27349410ed063cde8bfdce4c67
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
These are specific to local NVMe PCIe devices, so move them out of the
generic NVMe code into the PCIe transport.
Change-Id: Iea2056a4c438b7d3a303b4b5e977ce7aa9e58c05
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This will allow factoring out PCIe-specific code into a swappable
transport so that NVMe over Fabrics host support can be added.
Change-Id: I4df74dd268d655e3b36e8d6114ebe7d79a24844d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
For the nvme readv/writev APIs, the PRP checking logic was
incorrectly failing single SGE payloads that were larger
than 4KB. This patch adds a test case for this scenario,
and fixes the PRP checking logic.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6357d620599666046d2cb74d7923dac1f75418c5
Enforce exactly one trailing \n, and fix all of the existing cases.
Change-Id: I6218e4700e90aeb647eaee78089530c79993c8c8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This allows users to swap their PCI library from
libpciaccess/dpdk to another mechanism using the standard
method for swapping out the env library.
Change-Id: Ib2248f8b43754a540de2ec01897e571f0302b667
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This allows users to swap out SPDK's third party
libraries for an implementation based on their own
framework.
Change-Id: Ia0b7384ce5e31acba5ad0d7002dec9e95b759c52
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The new env library will wrap all third-party library
calls and be easily swappable with alternate implementations
at build time. For now, it's just the memory library
renamed.
Change-Id: I26a70933289f8137107208ba75f7520fd7a33da0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This patch also drops support for automatically unbinding
devices from the kernel - run scripts/setup.sh first.
Our generic pci interface is now hidden behind include/spdk/pci.h
and implemented in lib/util/pci.c. We no longer wrap the calls
in nvme_impl.h or ioat_impl.h. The implementation now only uses
DPDK and the libpciaccess dependency has been removed. If using
a version of DPDK earlier than 16.07, enumerating devices
by class code isn't available and only Intel SSDs will be
discovered. DPDK 16.07 adds enumeration by class code and all
NVMe devices will be correctly discovered.
Change-Id: I0e8bac36b5ca57df604a2b310c47342c67dc9f3c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Provide a convenience wrapper for general purpose dataset
management commands. The previous wrapper for deallocate
was difficult to use correctly and only for deallocate.
Note that the name is "dataset_management" as opposed to
"data_set_management" to match the NVMe specification.
It's questionable whether "dataset" is valid English, but
it is best to match the specification.
Change-Id: Ifc03d66dbabeabe8146968cf8a09f7ac3446ad68
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Namespaces can be allocated but inactive, which causes
the identify namespace command to fail. Handle this
case so that attaching to the controller does not fail.
Change-Id: I9d692f8e7841a9315a737b0a5e44d9b4e4484a13
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Rather than forcing the NVMe library user to pass a specially-allocated
block of memory (e.g. rte_malloc() in the case of the default
nvme_impl.h), just make the NVMe library allocate a suitable buffer
itself and copy to/from the user buffer as needed.
The fast path I/O functions still require special rte_malloc()
allocations, since we don't want to add an allocation and copy to the
I/O critical path.
Change-Id: I7fe88c0ba60c859a33bbe95b7713f423c6bf1ea8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Intel DC P3*** NVMe devices specify a desired stripe size, which was
used for splitting I/O. Not all devices, however, specify a desired
stripe size (such as the Intel DC D3*** line), and for only these
devices there was a logic mistake that overwrote the maximum I/O
size with a 2MB default. This patch corrects that error.
Change-Id: I94b72a3a3dd1dfa18bd638daf7e01a592eb6ed17
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
DPDK 16.07 introduced a new PCI ID field for matching by class code
instead of vendor/device ID. Use it to match all NVMe devices instead of
explicitly listing vendor and device ID pairs.
Change-Id: Ib2a5cc6833bf2b793d37d77caab97207f365df8f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
assert is part of the C standard library and is available
on any platform we'd consider porting to. Don't put a
wrapper around it.
Change-Id: I0acfdd6a8a269d6c37df38fb7ddf4f1227630223
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
pthreads are widely supported and are available on any
platform we currently foresee porting to. Use that API
instead of attempting to abstract it away to simplify
the code.
Change-Id: I822f9c10910020719e94cce6fca4e1600a2d9f2a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Since we bind the NVMe device to UIO driver to protect against native
NVMe driver, but for Admin queue, there are still INTx interrupts
exist, as all the completion for Admin queue will be processed in
user space, so we don't need INTx anymore.
Change-Id: Ife5b3e410ae95690ed0f3f9a2f2dfaf55a7797b5
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
rte_zmalloc() is broken and does not actually return zeroed memory on at
least DPDK 16.07 on FreeBSD, so do it ourselves.
Change-Id: If8da93ead0b3911c8bca24aa27ed90dc00b8a9a4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is a step towards enabling sharing SPDK NVMe
device access from multiple processes using DPDK's
multi-process framework.
Change-Id: I57d5eec158b42addc1036bd2583596471a467a95
Signed-off-by: GangCao <gang.cao@intel.com>
Drop the special-case preprocessor definition for PCI access library now
that config.h is available with an equivalent SPDK_CONFIG_PCIACCESS
define.
Change-Id: I4891d0f2fd7d3eea51b767df9e594555b36265ea
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Explicitly include spdk.common.mk at the top of all lib Makefiles so
that CONFIG options and other predefined variables are set.
Change-Id: I1e560c294fe8242602e45191a280f4295533ae44
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
For a single poll of the completion queue, if the user
submits I/O from within their completion callback and their
completion callback is particularly slow to execute, the loop
could potentially continue forever. To support this, we
need to limit the number of completions we'll process
in one batch.
Change-Id: If6bae47e52b36347dbe5622ace68c866ee88a0b2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This is intended to be used for examples/nvme/identify and similar
diagnostic utilities.
Change-Id: Ib2f941e9af7a3fb7555865ef253742e30ccad2b5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Previously, we used cap_lo and cap_hi to represent the 32-bit halves of
the full CAP register. However, it is simpler to keep them in a single
64-bit structure, and is no less efficient on 64-bit platforms.
Also name the NSSRS field from NVMe 1.2, which was previously reserved.
Change-Id: I1d5d9b0dccbb12373b4aed3db29c883881d43223
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This will allow removal notifications to be propagated to the library
user (e.g. for hotplug).
The callback is currently unused, but this at least prepares the API for
the future hotplug support.
Based on a patch by Dave Jiang <dave.jiang@intel.com>
Change-Id: I20b1c2dbf5e084e0b45a7e51205aba4514ee9a95
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use the knowledge that both the source and destination of
nvme_copy_command() are aligned to emit the aligned variants of the
SSE2/AVX mov instructions.
Change-Id: I0a7e32a3bb10b9a1920cd85691b79fa7172eecb3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This moves some definitions from nvmf_spec.h to
nvme_spec.h based on the latest publication.
Change-Id: I51b0abd16f7d034696239894aea5089f8ac70c40
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Swap the order of checks in the failure check - if rc is not 0, addr may
be garbage.
Change-Id: I110710efd00397c777d59ac8b219ba3cc2156596
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The conventional rule for returning errno is negative, hence there is no
need to modify caller's code to adjust this NVMe library.
Signed-off-by: Minfei Huang <mnghuan@gmail.com>
Signed-off-by: Minfei Huang <minfei.hmf@alibaba-inc.com>
Previously, there was no way to determine what namespace ID was assigned
when a namespace was created via the NVMe library interface.
Also drop the incorrect comment about calling
spdk_nvme_ctrlr_process_admin_completions(), since
spdk_nvme_ctrlr_create_ns() checks the admin queue internally.
Change-Id: If90a6e9fc773aefa220ebbf6effc2d033c9f20cc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This lets spdk_nvme_qpair fit in 128 bytes exactly.
Change-Id: I7c42582f22ece72a7f1d651468e63d4fe05babd6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Avoid potential double free cases.
This fixes a clang warning during scan-build.
Change-Id: I487d6fcd485d1f8ebb96b6f8cb54511628461f39
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
All trackers in outstanding_tr should have a non-NULL request. Add an
assert to verify this.
Fixes a clang warning during scan-build.
Change-Id: I0ac4d2bad17449f684808cbb98777627d890b65b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Document the requirement that qpair and cmd can't be NULL.
This placates clang, which previously generated a warning
during scan-build.
Change-Id: Ic2d5e808faee0028c890ce1312444fb3dc95f223
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The user can determine whether submission queues will be placed in the
controller memory buffer by checking the controller options use_cmb_sqs
flag in the attach callback.
Change-Id: I8a925ef99a48665a0e2ffaa90d9ff2b79b90b2fa
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The D3700/D3600 series support Controller Memory Buffer(CMB) feature,
CMB is available for holding submission queues, for those controllers
which can support submission queues in CMB, user can set the option
whether to enable it or not.
Change-Id: I8b0dc9e28dd6f5bb01bee99a532087212c04e492
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Resolve relative paths before using them to clean up command lines.
This should also help shorten the overall command line length that gets
embedded in the binary and used when locating the executable from a
coredump.
Change-Id: Ibff9849ede198bb04313496c8b7131485ffaf14f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch add support for Intel specific log pages :
marketing description page.
Change-Id: I87bccb2af286279598c9dd3c870094b384a0d2f7
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
For existing \file markers, move them to the top of the header and tweak
the wording for consistency.
Change-Id: Icce748effe4dbe97d79a8c87d31caf0ee5797058
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
For those controllers which can support end-to-end data protection
feature, add the support in the driver layer.
Change-Id: Ifac3dd89dec9860773c850416a6116113a6ce22a
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
When using DPDK PCI support via VFIO, the PCI device is reset
immediately before calling the PCI driver's init function. In some
cases, the device seems to not be ready to handle MMIO accesses right
away. Until the cause of this issue is fully understood, add a 500 ms
sleep as a workaround.
Change-Id: Ic893080a6f34d57eee80df3e6aa68c220c08df3e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
All children must be removed from a parent request before the parent is
freed.
Change-Id: I073ff0e9c5bcdd6181d90b918bfe4cce054f6c0b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Rename nvme_remove_child_request() to nvme_request_remove_child() and
move it next to nvme_request_add_child() to make the symmetry clear.
Change-Id: I78747c44ab3db1a656b33555a45f634dc5a55b31
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The NVMe specification recommends destroying all I/O submission and
completion queues before setting CC.SHN.
Change-Id: Iad71dd3fe03d897858034f3ca6ee02e0c55cc2b0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The NVMe specification recommends that orderly shutdown should just
write CC.SHN while the controller is still enabled rather than writing
CC.EN = 0 first.
This also allows removal of the now-unused nvme_ctrlr_disable() and
nvme_ctrlr_wait_for_ready() functions.
Change-Id: I4702ffda153f218ebb8ed92f0e36144b7ceded93
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This can happen if the controller is still resetting as the SPDK NVMe
driver takes control.
Change-Id: I263ae8f2e7b271e0448450557452a115c90c4fb6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch is used to handle the memory leak issue when
a parent nvme_request is free. In our current code,
we did not free the nvme_request allocated by the children
in the exceptional case.
Change-Id: Iabd1f1c3594af60c38e74e3d96c14f78d1aa1aed
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
This patch is used to add a nvme_request remove child
helpler function
Change-Id: I1e5bb228d53333ca3601f4ae30fcd801ea39e532
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Drop the "data_transfered" variable and just update length, since length
was not used otherwise after this point in the loop.
Change-Id: Icd2991e4e85de7e8c951ba14c441434e871ea4ef
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
If only one descriptor is needed, there is a special case in the spec for
SGL1 using the Data Block descriptor type. Add a comment to make it
clear what is going on.
Also tweak the SGL1 setup to copy from the first SGL descriptor list
element instead of relying on the last value from the loop above, since
that could be easily broken by accident.
Change-Id: I49ef97fe5bf18d2bf1d86b4310a7d3abdfd03e57
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
tr->u.sgl is already a struct spdk_nvme_sgl_descriptor pointer.
Change-Id: Ie2c8c052fc28e6369d1d095b8d566acae47975d1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
_nvme_qpair_build_hw_sgl_request() will only be called for payload_size
!= 0, so every SGL will have at least one segment. Drop the 'else' that
was handling nseg == 0, and add an assert to document the payload_size
requirement.
Change-Id: I48e2a862a7657ba85605c0d35c0b65dfac072167
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The assert is checking a variable that is invariant within the loop, so
move the assert up to the top of the function.
Change-Id: Iee7eea1736bc7f953665feb390c3d6340dbeffbc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This makes it easier to find the larger doc comments that produce separate
pages.
It also allows removing the lib/nvme directory from the Doxyfile, so
only the public API headers are used to generate documentation.
Change-Id: I8c46edb8067a91dda5b23fb0864efd3dd8aaeba5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_nvme_qpair_process_completions() is already documented in
spdk/nvme.h, so merge the doc comment from nvme_qpair.c into the public
header.
Change-Id: Id7722d99d209852ee64286e0a3fa127b863e10aa
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Don't allow the user to request more than the valid maximum number of
I/O queues (65535) or 0 I/O queues, since this can't be encoded.
Change-Id: I2d6e0bba03476085842bad683b273cdf9d6e6d5e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Per the NVMe spec, SGL segments must be Qword (8-byte) aligned. Add a
static assert to make sure this is true for the sgl member of struct
nvme_tracker (assuming the whole nvme_tracker is at least 8-byte aligned).
Change-Id: I827aa40b56de648d83f524a4f1e79c3202b676be
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
If the controller is failed, attempting to submit additional I/O is
futile - it will be immediately failed using the completion callback,
which can result in infinite recursion if the application code resubmits
I/Os on failure.
Instead, provide a way for request submission to indicate failure, and
use it to exit early if the controller is failed; this can only happen
when a reset failed (timed out).
If a request is submitted directly by the user when the controller has
failed, we can return an error code directly. For the case where I/O
was queued and is being resubmitted after a reset, we still need to call
the completion handler via _nvme_fail_request_ctrlr_failed().
Change-Id: I9e144328d524b25db2acf48e923b584746e8d0b6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Provide a new structure, spdk_nvme_ctrlr_opts, to let the user modify
the default controller initialization options during probe/attach.
Currently, only the number of queue pairs can be modified in this way;
other options will be added later.
Change-Id: Ie27b9429291d93a9353c0d820f0ad467d3b0e7cb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Replace the previous code that allocated each tracker individually with
one large allocation per queue pair.
struct nvme_tracker is now explicitly padded to reach exactly 4096 bytes
to allow normal array indexing to work correctly while maintaining the
alignment requirement that ensures each tracker's PRP list does not
cross a page boundary.
This also allows removal of the act_tr array, since the tr array can be
indexed directly now, and each tracker can store its own active state.
Change-Id: Ia7c51735b96594d12f7f478cefcc4aedc84207ad
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The previous method for registering I/O queues did not allow the user
to specify queue priority for weighted round robin arbitration, and it
limited the application to one queue per controller per thread.
Change the API to require explicit allocation of each queue for each
controller using the new function spdk_nvme_ctrlr_alloc_io_qpair().
Each function that submits a command on an I/O queue now takes an
explicit qpair parameter rather than implicitly using the thread-local
queue.
This also allows the application to allocate different numbers of
threads per controller; previously, the number of queues was capped at
the smallest value supported by any attached controller.
Weighted round robin arbitration is not supported yet; additional
changes to the controller startup process are required to enable
alternate arbitration methods.
Change-Id: Ia33be1050a6953bc5a3cca9284aefcd95b01116e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Since the nvme_tracker struct was extended to allow space for 253 SGL
descriptors at 16 bytes each, we can use the same amount of space in the
other branch of the union to store 506 PRP list entries at 8 bytes each.
This increases the maximum supported I/O size for PRP-only devices from
128 KB to slightly under 2 MB.
Change-Id: I2b9905be41343ff360b4cdaccca87ea6f753e89c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Also add a compile-time assert to make sure this doesn't accidentally
break again in the future.
Change-Id: I4d18cfbf21392291e1bdd76eff055429009d28d6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
nvme_ctrlr_cmd_create_io_cq() was using the queue ID as the
IV (Interrupt Vector) field in the Create I/O Completion Queue command.
Since the SPDK NVMe driver does not enable interrupts, this is
misleading at best.
Change-Id: I3ea53701fdb9f21d9dc8d8fe20ccf2833b76cfbf
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch just implement the feature of format progress indicator.
the NVMe available does't support FPI currently.
Change-Id: Ie937591fb1720d8a062354322aabcc95ff14b2d3
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
This field is write-only in the current code; the NVMe library does
not track timeouts on requests.
Change-Id: I50e53bb3c299bf16912c48be8aad3eec829154af
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
When I/O spans a stripe boundary, the driver splits the request into
multiple requests, so for 1 segment memory larger than the stripe
size, we also need to split the segment memory.
Change-Id: I22ea5734d7066865a57a3c90fe18d5f76f373f1d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
For those NVMe controllers which can support SGL feature in
firmware, we will use SGL for scattered payloads.
Change-Id: If688e6494ed62e8cba1d55fc6372c6e162cc09c3
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
nvme_spec.h already has a structure with the correct bitfields for the
CSTS register, so use it in struct spdk_nvme_registers.
Change-Id: Id0663aee2611fb5195f9012a3176799e32701bb0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This will be exposed in the public API. This rename is in a separate
commit to ease review.
Change-Id: I1b7fef36f85265db27935ac4d22ceef3c7282502
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Set up the infrastructure for creating I/O submission queues with
variable queue priority (QPRIO in Create I/O SQ command).
Currently, this is unused, since we always use the default arbitration
method (round robin), but it will allow reinitializing submission queues
with the correct priority once weighted round robin is supported.
Change-Id: I425003879e624cfcc9687bdc495b5c1726b5a8af
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This function no longer exists and was not part of the public API.
Change-Id: I94fd066b63e812367687d11bc00aa11ab88d4671
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Many of the internal controller initialization functions did not check
for allocation failure; add return codes and check them where
applicable.
Change-Id: Id1b33bb06fca84035369d8b7ecd4c36b8ba7134c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This function returns true if the namespace is active or false if it is
inactive (e.g. no namespace has been attached to the specified namespace
ID yet).
Also use the new function to add checks in the examples and tests where
applicable.
Change-Id: I35465b315ae1a1677c5a82191ad9b1da1c216d50
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Prepare for qpair to be exposed as part of the public API.
Change-Id: Ia63e863e95554adceeade20c829f12fe346375d5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
When multiple NVMe controllers are being initialized during
spdk_nvme_probe(), we can overlap the hardware resets of all controllers
to improve startup time.
Rewrite the initialization sequence as a polling function,
nvme_ctrlr_process_init(), that maintains a per-controller state machine
to determine which initialization step is underway. Each step also has
a timeout to ensure the process will terminate if the hardware is hung.
Currently, only the hardware reset (toggling of CC.EN and waiting for
CSTS.RDY) is done in parallel; the rest of initialization is done
sequentially in nvme_ctrlr_start() as before. These steps could also be
parallelized in a similar framework if measurements indicate that they
take a significant amount of time.
Change-Id: I02ce5863f1b5c13ad65ccd8be571085528d98bd5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This check was dead code, since both places that called
nvme_ctrlr_wait_for_ready() could only ever have cc.en = 1.
Remove the original nvme_ctrlr_wait_for_ready() wrapper and rename
_nvme_ctrlr_wait_for_ready() without the underscore to replace it.
Change-Id: I6c9aa6a5b93606fb89d168c23f6735fcf3a84eaa
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
In nvme_ctrlr_hw_reset(), if we encounter a controller whose CC.EN bit
is already 0 (controller is disabled), the previous code would enable
the controller just so that it could be disabled to get a full reset
(transition from CC.EN = 1 to CC.EN = 0). However, it is a safe
assumption that if CC.EN is already 0, the controller has just been
reset, so we don't need to reset it again.
This saves a significant amount of time (2+ seconds per controller with
Intel SSD DC P3700) during initialization for devices that were disabled
on startup.
Change-Id: I552b1f0f185a84a8a0ce57a93b012d9d5fe096f3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Explicitly include system headers for types that are used in public
headers.
These were being pulled in by example code, so SPDK itself would build,
but other apps that did not include stdbool.h would fail to compile when
including spdk/nvme.h.
Also include nvme.h first in nvme_internal.h so this case gets tested
during normal compilation.
Change-Id: I8ed0fc4e0dcf71551738c461b4b825cc2ee1d233
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
payload here is a pointer to the buffer, not a struct nvme_payload.
Use nvme_allocate_request_contig() and pass the length in bytes rather
than dwords.
Change-Id: Idbbb3614b1d69148fe041d26e0c148bd9ce53724
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The parent field is in the cache line of nvme_request that is only
supposed to be accessed for split (child) I/Os. All accesses to parent
are done from child-specific calls now, so it does not need to be
initialized in the common case of a non-split I/O.
nvme_request_add_child() will set parent when splitting occurs.
Change-Id: Ib86c16ba1ea2ce32f62079831101da2a099047af
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Allows simplification of _nvme_qpair_build_sgl_request(), which does not
need to know whether a request is a child or not.
This also removes a read of req->parent for non-split I/Os; the parent
field is in the section of nvme_request that is only intended to be
initialized for split I/Os, which should be detected by looking at
num_children.
Additionally, this fixes a potential problem if requests were nested
more than one level deep (e.g. req->parent was not the original user
request).
Change-Id: I3ea1dc134bbb1e3b8c6b5a479f5d760bd97ea848
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Building the tip of the spdk master against the dpdk-2.2.0 fails with
inappropriate RTE_CACHE_LINE_SIZE error. The simple reversal of the RTE
include file order below fixed it for me.
Change-Id: I8782b7ee21d7f185e6e678f874fbdab9403117a5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch is used to remove the duplicated code.
As we found the structure in "ifdef and else" are same.
Change-Id: I1717ce3dcc14134ac59c165d801e5e811b987be5
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Move toward collecting PCI IDs, class codes, etc. in pci_ids.h instead
of individual device-specific headers.
Change-Id: Icff162d48ac663db71d0576ceee16a9bd7a751cd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
PCI_VENDOR_ID_INTEL -> SPDK_PCI_VID_INTEL
Also change the inclusion guard macro to be consistent with the other
SPDK headers.
Change-Id: I29346267172cb8c07cc4289eed4eca2d55e942d6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This doesn't need to be part of the public API. It is only used by the
NVMe quirk lookup tables.
Change-Id: I7662e333c70b7c5f814bd7c8a528b6bff1f0732e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Rename all functions with a spdk_ prefix, and provide enough of an API
to avoid apps needing to #include <pciaccess.h>.
The opaque type used in the public API for a PCI device is now
struct spdk_pci_device *.
Change-Id: I1e7a09bbc5328c624bec8cf5c8a69ab0ea8e8254
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is a step toward abstracting PCI access so that libpciaccess can be
swapped out more easily.
Change-Id: I5491459460cbfbd0be471f70f9d07a7eb3175234
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Instead of writing the completion doorbell once per completion,
just write it once at the end of the completion while loop.
This reduces the number of mmio writes by coalescing several
writes into one when we get multiple completions at a time.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3cc3864dcfe43186bec51be1a732e84ef3be05ae
This patch did the work to use pci related functions
provided by DPDK.
Change-Id: I263b79f1b42868ef0c1efcf1bc392a4b3a328e93
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
With CONFIG_PCIACCESS=y in CONFIG file, we can
use libpciaccess library; With CONFIG_PCIACCESS=n
in CONFIG file, we use pciaccess functions provided
in DPDK.
Change-Id: I786c5589b8e7909ba2e59d222938dd5ba45bf92d
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The new probing API will find all NVMe devices on the system and ask the
caller whether to attach to each one. The caller will then receive a
callback once each controller has finished initializing and has been
attached to the driver.
This will enable cleanup of the PCI abstraction layer (enabling us to
use DPDK PCI functionality) as well as allowing future work on parallel
NVMe controller startup and PCIe hotplug support.
Change-Id: I3cdde7bfab0bc0bea1993dd549b9b0e8d36db9be
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch adds Intel NVMe device list and overrides the
supported log pages according to the quirk list.
In particular, the READ_CMD_LATENCY and WRITE_CMD_LATENCY pages are
supported on Intel DC P3x00 devices despite not being listed in the
Intel vendor-specific log page directory.
Change-Id: I3a2b6a5fa142c6e9c93567df65e85980bd3c7cc0
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Also add a space between Copyright and (c).
The copyright year can be determined using git metadata.
Also remove the duplicated "All rights reserved." - every instance of
this line already has a corresponding "All rights reserved" immediately
below it, except for examples/ioat/kperf/kmod/dma_perf.c, where I have
added it manually.
Performed using this command:
git ls-files | xargs sed -i -e 's/Copyright(c) \(.*\) Intel Corporation. All rights reserved./Copyright (c) Intel Corporation./'
Change-Id: I3779f404966800709024eb1eb66a50068af2716c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
1 Add new API nvme_ctrlr_is_feature_supported().
2 Add unit test for new API.
Change-Id: Ia6d8710755c3b13984fca9d56700efe043be1402
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
This will allow replacing these _nvme_fail_request_bad_vtophys() calls
with the correct error later. vtophys is not actually used within the
SGL request builder, so this is the wrong error.
Change-Id: Ibc2a3b029a8abad1d563b9df200325d7d64498da
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
No code change, just moved into a function for readability.
Change-Id: I883443c06d961c6dbeffed1a6fb153177e6e3fcd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This cleans up the I/O splitting code somewhat.
It also moves the SGL payload function pointers up into the hot cache
section of struct nvme_request without pushing the other important
members past the cacheline boundary (because payload is now a union).
Change-Id: I14a5c24f579d57bb84d845147d03aa53bb4bb209
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
A namespace indicates support for reservations by reporting a non-zero
value in the Reservation Capabilities field in the Identify Namespace
data structure, and controller indicates support for reservation in the
Identify Controller data structure, Here we used namespace field as the
support flag.
Change-Id: I0e1e29548aa3fc8b6d3bbeb4149ec4864316f092
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Support for the Force Unit Access and Limited Retry
bits on reads and writes.
Change-Id: I9860848358377d63a967a4ba6ee9c061faf284d4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
NVMe reservations provide capabilities that may be used by two or more
hosts to coordinate access to a shared namespace, here we add the 4
reservation commands: reservation register/acquire/release/report.
Change-Id: Ib03ae2120a57dd14aa64311a6ffeb39fda73018c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
For the purpose to support different types of input scattered payloads,
such as iovs or scattered list, we define common method in the NVMe
driver, users should implement their own functions to iterate each
segment memory.
Change-Id: Id2765747296a66997518281af0db04888ffc4b53
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Change nvme_ctrlr_is_log_page_supported() to match
nvme_ctrlr_cmd_get_log_page().
Change-Id: I4c8a1f11044b083f8f8990ef40a4f789fa3c24e3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Request allocation may fail, so we need a way to indicate failure to the
caller.
Change-Id: I278c3f42e4d2fa1902bb0ab33ad3bf7c7007fd0d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
1 Add supported log pages data structure.
2 Bulid up supported log pages when NVME start.
3 Provide unified API for getting log pages.
3 Unit test suit optimization base on above modification.
Change-Id: I03cdb93f5c94e6897510d7f19bc7d9f4e70f9222
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
nvme_ctrlr_process_io_completions() and
nvme_ctrlr_process_admin_completions() now return the number of
completions processed.
This also adds the possibility of returning an error from the
process_*_completions functions (currently unused, but this at least
gets the API ready in case error conditions are added later).
Change-Id: I1b32ee4f2f3c1c474d646fa2d6b8b7bbb769785f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Previously, if nvme_allocate_request() failed in
nvme_ctrlr_construct_and_submit_aer(), there was no error checking, so a
NULL pointer would be dereferenced.
Add a return value to nvme_ctrlr_construct_and_submit_aer() so we can
signal failure to the caller. This can only really be reasonably
handled during initialization; when resubmitting a completed AER later,
there is nowhere to report failure, so the AER will just remain
unsubmitted.
Change-Id: I413eb6c21be01cd9a61e67f62f2d0b7170eabaa3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
According to the specification, the dataset management for deallocate
attribute can support to 256 ranges, so we should use uint16_t
instead of uint8_t as the ranges parameter.
Change-Id: Ibacc00da8b4b9e2b2f3454d382aadf7ad353ff31
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The parent field is no longer used in the normal (non-split) I/O path,
so move it down to the default-uninitialized part of struct nvme_request
that is only touched for parent/child I/O.
This also puts it closer to other related fields (children,
child_tailq, parent_status) for improved readability.
Change-Id: I120df1df0c967d2f74daa6e97c0bc83626e3be7f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
nvme_qpair_submit_tracker() and nvme_qpair_manual_complete_request() are
only used from within nvme_qpair.c, so they can be static.
nvme_qpair_submit_tracker() is moved up to avoid needing a declaration
(no other code change).
nvme_ctrlr_hw_reset() is only used from within nvme_ctrlr.c, so it can
be static.
Change-Id: I9a7953d7baaec76e875dd535daf557ea24bef801
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
These delays are left over from early development. They are completely
unnecessary and not based on anything in the NVMe spec.
Startup time should be slightly improved (on the order of 100 ms in
normal cases).
Change-Id: I9068b1a0f42feabcfe656d68be91e05a56cc53a3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
NVMe doesn't require the specific 64-bit MMIO ordering on 32-bit
platforms performed in spdk_mmio_read_8(), but it doesn't hurt.
We have to pick one of the two possible orderings, so pick the one
required by I/OAT.
Change-Id: I2b909d64d0c077b797d0f64a11d78d1ecc55eec7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use $(CLEAN_C) throughout the Makefiles to clean up a consistent set of
generated files.
This also adds coverage files to the list of cleaned files.
Change-Id: Iceb922935a45c9eecbf2f3443bd0ee4f5c966825
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Most devices today support far fewer than 1024, but this is a
more reasonable default upper limit than the spec-defined 64K.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia8a6d80c3a5aa181f27c8354758c6ca468013d92
lib/memory was already using this pattern; extend it to lib/util and
lib/nvme.
Change-Id: I84a633d7805522fc94d8fc11ad5486ce552702e5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The .o files are always kept anyway, so there is no need for an explicit
rule.
Change-Id: Id1687ba89daabfda5802e4328deb127403277928
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add common $(COMPILE_C), $(LINK_C), and $(LIB_C) variables that contain
the commands to build a .o from a .c, an app from objects and libraries,
and a library from objects, respectively.
Change-Id: Ie2eaa13156b8bf3db7a4ffa66161382d829aef07
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
nvme_ctrlr_process_io_completions() now takes a second parameter,
max_completions, to let the user limit the number of I/Os completed on
each poll.
If there are many I/Os waiting to be completed, the
nvme_ctrlr_process_io_completions() function could run for a long time
before returning control to the user, so the max_completions parameter
lets the user have more control of latency.
Change-Id: I3173059d94ec1cc5dbb636fc0ffd3dc09f3bfe4b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
After converting is_resetting to bool, it is smaller and can be packed
more efficiently with is_failed and reordered after the larger fields
used in the I/O path.
Change-Id: Ifa2301eb61ce8d38eb5412cca61d2a91b1474101
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
It was previously uint32_t because it was accessed with special
uint32_t-only atomic read/write helper functions, but that was replaced
with normal variable accesses protected by a mutex.
Change-Id: I304a7ef8c723cb33fd08110b697f848823a163e7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Set SPDK_ROOT_DIR explicitly in each Makefile so that make from a
subdirectory will work (assuming all dependencies from the upper
directory have already been built). This allows partial rebuilds of the
source tree, as well as building the unit tests without requiring DPDK.
Change-Id: I3f65b805d490b40ff5ec53cceb61df542ce814f1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Fix all of the uses of __thread so they are at the beginning (similar to
e.g. static).
Don't actually enable -Wold-style-declaration, since clang doesn't
understand that.
Change-Id: I0dcbb758143eab90fc978334c8f256c6602cc4cd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Rename the nvme_free_request macro to nvme_dealloc_request to match
nvme_alloc_request and add a wrapper function to nvme.c so that the
macro contents are only expanded once.
The DPDK nvme_impl.h uses rte_mempool_put(), which generates a large
amount of code inline. Moving this macro expansion to a wrapper
function avoids inlining it in the multiple places nvme_free_request()
gets called, most of which are error handling cases that are not in the
hot I/O path.
Change-Id: I64ea9c39ba47e26672eee8d5058f1489e07eee5b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is the only place nvme_request_add_child() is used, so move it
nearby and make it static to allow the compiler to inline it.
Change-Id: If4a7e17fde0b0272e1d4432c1dcedbec27c25371
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move dependency includes into a new spdk.deps.mk file,
then include it at the end of Makefiles that build
source files.
Also add a test to autobuild.sh to confirm that
binaries are regenerated if we make after touching a
header file.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If6a1905706a840f92cbdf3ace7fbdb27fe2de213
Pull the almost-identical request splitting code for driver-assisted
striping and maximum I/O size into its own function,
_nvme_ns_cmd_split_request().
Change-Id: I3c15ac2073f8f5aec721c427199c8fb1a5d6a1fc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
GCC generates a series of 64-bit MOV instructions for the memcpy() into
the submission queue. We can do better with 128-bit SSE2 instructions.
DPDK already has a memcpy implementation that is optimized for small
inline copies, so use it instead of memcpy.
Change-Id: I5f09259b4d5cb089ace4a8ea6d2078c03fee84f3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
No change in behavior, just a simplification.
We already have a check for retry, so pull the cb_fn check out and put
it under the !retry branch.
This makes it clearer that requests that are going to be retried will
not get their callbacks called.
Change-Id: I70c7067e550c7fca78b0441b5474833f73863315
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Since it is empty function. It can be deleted.
Add nvme_assert to fix issue reported by scan-build.
Change-Id: Ia0e8f656e1dac0da7ec72f8404469ea1b0dcb40e
Signed-off-by: Liang Yan <liangx.yan@intel.com>
This is the only place that was using printf directly in the NVMe
library. Replace it with the official nvme_printf logging mechanism.
Change-Id: I689a7c0854b5e47eb357150f814e347cd44be79c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
In nvme_qpair_complete_tracker, make sure we got a valid request in the
tracker that is being completed.
This should never occur in practice, but safeguard against it in case of
programmer error. Fixes a scan-build warning about potential NULL
dereference.
Change-Id: Id82af604d2a5ed5de0aeccf3affa1900f6712ebe
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Document the assumptions made by qpair_construct using asserts.
These values can't actually be 0 in practice due to the way they are
derived, but scan-build can't see that. It is also useful to have these
asserts in case of future modifications.
Change-Id: I546c057f5cbe7ccc62acd90b595e423cd450d86a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
nvme_dump_command is totally unused aside from the unit test.
nvme_dump_completion was used in qpair, but it can be replaced with the
equivalent nvme_qpair_print_completion.
Also added the missing nvme_completion fields to nvme_qpair_print_completion
that had been printed by nvme_dump_command.
Change-Id: Ia5ee66f3553df06febe8f465d42e49a84c555dd2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is calculated elsewhere now, so remove the comments around
nvme_qpair_construct calls.
Change-Id: I2dc4956a9e250b88e62038bc55cdd315940ad391
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
rc is reinitialized before it is ever read.
Change-Id: I9abbc256fb06022f3024b0aa3827be02a273f20a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
