NVMf cnx acceptor poller is changed to check the asynchronous events
from the RDMA devices.
RDMA async events are polled together with RDMA CM events; the file
descriptors are combined into a poll fd array and processed in a single
poll syscall.
The errors handler is an empty placeholder for this patch, it just
prints the kind of event read from the IB device context.
The work for implementing event handling is left for later.
Signed-off-by: Philipp Skadorov <philipp.skadorov@wdc.com>
Change-Id: Ib167990651b585090aceef1404a88d431a910226
Reviewed-on: https://review.gerrithub.io/412540
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These are trivial to abort: since we just hold on to aer_req until an
event is triggered, we just need to set aer_req back to NULL and
complete the request.
Change-Id: I74ffe7a227fcaf816c0c584fe5c82a940475687f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/412881
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Combine request lookup and abort into a single operation. Keeping them
separate would result in duplicating a lot of logic for finding the
proper list from which to remove aborted requests.
This is still a no-op for now, but it paves the way for aborting
requests that are still queued in software.
Change-Id: If8f268521f2c9f93b413261d87e9f39e539813aa
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/412880
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I12e629d21f30372ae3c0d3939c036b0ae3562e6e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/412992
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This path works for disconnect events on qpairs at run time.
Disconnects in response to killing the target have
not been worked out yet.
This path does not currently wait for outstanding I/O to
complete.
Change-Id: I8e476c8444b460c18e51601fb950b9132d12f67d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/412076
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Per the NVMe specification, NN cannot change while there
are connections present. There was originally a check
for this that was removed in commit 763ab88 to match
the behavior in the Linux kernel. However, after a
discussion with the NVMe specification committee, SPDK
was originally correct.
Change-Id: I42414d1ee0c8c83f3335d8790edbf65d813c5c74
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/412544
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The NVMe spec says that Identify Namespace should return a zero filled
data structure for namespaces that aren't active, rather than failing
the command with a status code of Invalid Namespace or Format.
Change-Id: Ia9156477d8701694f8b295a67e1669fd09e2cb62
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/412872
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This will become the public interface for implementing
bdev modules. Right now the file exposes too much of
the guts of the bdev layer to modules, so it needs
to be stripped down.
Change-Id: Ie8b8c3271d51fdb8d0c24a80244b3f3e510c8790
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/412297
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
As of NVMe 1.3b, there is only one command set. But pipe
this through the driver per-spec anyway.
Change-Id: I4faf8596f5ce638e5e2a500b424e00ceb6e89edc
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/412102
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Abort is not currently implemented, since spdk_nvmf_qpair_get_request()
always returns NULL, but this will allow it to be implemented in a
thread-safe way.
Change-Id: I6dfd1ee50848deed0f4a2667aad5a811d8dd4ca7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/410723
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Make sure every event has a handler. No new code
to actually handle events yet.
Change-Id: I4d63898e9bd7fcaa7dc3486c07f42d75b4d48da0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/412074
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Purpose: To make the reqs recycle more flexible.
Change-Id: Ied37397a10dada22a7aee6bb5a316da6a0583073
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/410866
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This will allow us to later quiesce all requests for
a given subsystem.
Change-Id: I50a4df9bf1f65a2fc6668295cf9978d2099f6507
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/406450
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The realloc breaks TAILQs inside the structures, which causes
subtle bugs. Instead, statically allocate all of the subsystem
arrays. This sets up the maximum number of subsystems to be
configurable, but does not actually expose it through the
config file yet.
Change-Id: I7347b6002b6babc0678ce59cd218a454fe3a6f88
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/410521
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Transport Data Block descriptors aren't actually used by the
RDMA transport, but this function will likely be used by
other transports in the future.
Change-Id: Ic2b6a1f3a86e350c7b7258d75964a38338bdd3b5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/409940
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch selects part of commit:
adfa9f6dc7
In the previous patch, the failed reason is the logic
that admin qpair actively destroys the ioqpair when
the admin qpair is recevied early. For this part,
we need to investigate it later since for multiple core
usage in our current handling case, we possibly have
admin qpair firstly to enter the destruct phase even if
the initiator sends the I/O qpair deletion first. Thus,
the ioqpair deletion can be recycled twice.
And this patch is selecting the part of the logic:
only to make each ioqpair recycled by its own thread.
Change-Id: Ic9cc3fbdf56fa8a75cb5d12a16ce6c3129220bca
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/409363
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This seems to be causing a new intermittent test failure with a call
stack that looks like:
# nvme disconnect -n nqn.2016-06.io.spdk:cnode1
transport.c:175:23: runtime error: member access within misaligned
address 0x000000004321 for type 'const struct spdk_nvmf_transport_ops',
which requires 8 byte alignment
0x000000004321: note: pointer points here
<memory cannot be printed>
#0 0x4e014b in spdk_nvmf_transport_qpair_fini
#1 0x4f14fe in nvmf_qpair_fini
#2 0x502a95 in _spdk_reactor_msg_passed
This reverts commit adfa9f6dc7.
Change-Id: I4bab9d8b5294e241c960683df14acbf457bf3391
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/409251
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also this patch make each io qpair recycled by its own thread.
Change-Id: I386e411f5d4cee4629054e4cce8d1f4401ec49c8
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/407743
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: I81c3f5725dc276717ab3d8316e393349b6a33134
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/408251
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Update the thread-local caches with new namespace data during each call
to spdk_nvmf_subsystem_remove_ns to handle the case where the user
requested to remove a namespace and then immediately add a different
one at the same namespace id. This makes the call asynchronous.
Change-Id: I8fd1968f7da78966386de18506b98d403b82d80e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/408220
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The namespaces exposed by the NVMe-oF target may be attached to multiple
(virtual) controllers at once, so we should indicate this via the
Namespace Multi-path I/O and Namespace Sharing Capabilities (NMIC) field
in the Identify Namespace data.
Change-Id: Iecca80f01577422f73d781c05dcb212db55f7ee1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/407834
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This reverts commit 498f9add11.
Making the subsystem removal asynchronous seems to be triggering an
intermittent failure in the NVMe AER test. Let's revert this for now
until we can diagnose the issue.
Change-Id: Ie1d598f0d5cce07e6869d87cd8388848caa78e46
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/408118
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Performing a subsystem update on each poll group after the addition or
removal of a namespace allows us to avoid the case where we pause a
subsystem, perform a removal, then an addition, resume the subsystem and
don't update the channel for that subsystem. This, however requires that
spdk_nvmf_subsystem_remove_ns be asynchronous.
Change-Id: I856572c02e6267f708da3a956accbbedae7260fb
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/407012
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reason: Initiator sends the qpair deletion in wrong order.
The correct order should be all io qpairs deletion and then
the admin qpair deletion. However, nvme perf does not follow
this since we did not catch ctrlr + c. If we catch ctrlr + c,
we need to use the spdk app framework, or other methods. We should
support this in another patch.
Morever, to prevent the incorrect behavior causing the coredump
of target, we need also consider such case in our NVMe-oF target
design. And this patch, can solve this issue, it will defer the
admin qpair deletion when there are still active io qpairs.
Change-Id: Iec9b88c1d6254f36963c92402ebfe8bd99abaea5
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/407771
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: I41c9946e6c30c3eda1abf3669270a9b9533e3a50
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/407612
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If the host sends a Dataset Management command that does not specify the
Deallocate attribute, the NVMe-oF target should return success; the spec
says that this command is advisory, and all combinations of attributes
may be set.
Change-Id: I5d87d93ec61d27c8d65a17bbe4accc12ba26bbd3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/406995
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib0b5e75f33ed22801a564a89651caa28ebe2b4f6
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/406890
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Icd365143bafe259526e303e74618908d2c52f146
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/406663
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia1b26b35a5befbd6e3775bce224a8a9f473426e9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/406442
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Don't allow the user to specify an invalid ASCII string for the
controller serial number field.
Change-Id: I1c3acf6997a0afcdbfc03caf9e8d9b5fab429106
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/406441
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Subsystems enter the paused state when their internal
data representation is changing (i.e. namespaces are
being added, etc.). Queue incoming requests while
in this state.
Change-Id: I51e0c687b5b0f98351faa20dffa57110eb4a9df4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/406449
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This was internally asynchronous already, but make it
explicitly asynchronous so other code can properly
wait on the operation to complete.
This fixes an intermittent CI crash.
Change-Id: I81c9b19673566047dcffa94796236ca9fd7fa7d0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/406226
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I595f0ec871174557a35811fe3b102c33a5a60ab0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/405931
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
No code change - the existing code is moved as-is.
This is the only place it is used, and it is conceptually part of the
virtual controller implementation.
Change-Id: I863f5931225c4d78e515341445e91b29a73da64d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/406251
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The NVMe-oF subsystems that our target exposes may have multiple
subsystem ports and multiple controllers; report these in the Identify
Controller data structure Controller Multi-Path I/O Capabilities field.
Change-Id: I5f1d4ce91698fe6abd281fdc022b6e3b37efd3ef
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/406244
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Users can use RPC to add/remove a namespace to/from
existing NVMe controller, SPDK NVMeoF target will
generate an asynchronous event as an indication to
host when asynchronous event request is available.
While here, we also set the event with invalid log
identifier, so that the host doesn't need to clear
the event. Users can use Set Feature to disable
such event.
Change-Id: I93c4d752f552d3c86c53e80877aa61c093e167cc
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/398759
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since the function call will remove all the active I/O channels,
the pollers don't need to submit all the pending I/O requests any
more.
Change-Id: I93e7b070f5c74b10f67bd1248fa515a29dca5620
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/403759
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I4c23f83ebaf80f1b62fb4c1144ff864bdfd6efbe
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/406014
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Most of these don't actually do anything useful yet, but they are all
required by the NVMe 1.3 specification.
The features are also rearranged in numeric order to make it easier to
match up the cases in the switch statements to the specification.
Change-Id: I5f70ecb0bb38b9e1d8287d32fc2e03bca5f1f8a6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403903
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
1) The user should provide MaxNamespaces during the construction of the subsystem
2) The namespace which is added should have nsid less than or equal to MaxNamespaces
3) If the user does not provides MaxNamespaces then the exsisting behaviour continues where the nisd can grow dynamically when it is not connected.
Change-Id: I54769d9669575a5f6bf56fe5a262191ac51c474d
Signed-off-by: suman chakraborty <suman.chakraborty@wdc.com>
Reviewed-on: https://review.gerrithub.io/405375
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia382110fbbadea51d3b454e07e775afc9e286eae
Fixes: c5cd53cce0 ("Support for Commands Supported and Effects Log Page")
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/405821
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I93a4cae46dad7ec42fd82fa4917fd27e3b14c46a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/405827
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Set Features - Asynchronous Event Configuration has reserved bits in the
CDW11 value, which we shouldn't allow the host to set. Explicitly set
them to 0 in the Set Features handler to avoid propagating them to the
Get Features return value.
Change-Id: I73ed87d6d310e585c073b1db3b875147b4727007
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403902
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Most Get Features commands can be handled by just setting CDW0 to a
particular value and returning success.
Get Features - Host Identifier needs special handling, so it isn't
converted.
Change-Id: I8a3e2d5659a9ecbb3904589912ccf44d0d25b715
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403901
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
No functionality change, just a cleanup. This will help with future
simplification patches.
Change-Id: Id2efd851ed0add664e516725ab98b5e1f8cafff5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403900
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A new optional parameter is added to the NVMe-oF target namespace
options to set the Namespace UUID, which will be reported via the
Identify command Namespace Identification Descriptor list.
Change-Id: I53c6d6fa6475d3395d412d196b42000715e9ed81
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/400894
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Now that the NVMe-oF target emulated controller supports Identify with
CNS = 03h (Namespace Identification Descriptor list), I believe we
support all of the mandatory parts of NVMe 1.3, so let's increase the
reported VS/VER fields to 1.3.
Change-Id: Iee1052bf9ee1a0954f47770c7e5151886e63f11c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403891
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This should be enforced by the main NVMe-oF target library, not in the
event subsystem code.
Change-Id: Ibce4fd78710b4a9da374e3d5979df4a16e91533c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403380
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This will be used to track time used in pollers - each poller can now
indicate if it found any work to do or not.
For cases where it was obvious and the infrastructure was already in
place, existing pollers have been modified to return 0 or a positive
value to indicate whether work was done. Other pollers have been
modified to return -1 by default, indicating that the poller isn't
indicating anything about whether work was performed. This will allow
us to find un-annotated pollers easily in the future and fix them
incrementally.
Change-Id: Ifebfa56604a38434fac5c76ba7263267574ff199
Signed-off-by: Roman Sudarikov <roman.sudarikov@intel.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/391042
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I22c11cdd5ab0ffdf72b27223c0c9cd7282537613
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/402667
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This lets us have a common place to put definitions like the length of
the UUID string, as well as abstract away some of the API warts in
libuuid (non-const values, no size checking for uuid_unparse, etc.).
Change-Id: I80607fcd21ce57fdbb8729442fbb721bc71ccb98
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402176
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We should add this state after free the io channel.
To make sure that we will not touch the wild pointer.
Change-Id: I570f649fe3ddffaea430125b40c6b6b020a05222
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/402999
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: Ic3a612ceed65799d16dae111db355333a1915187
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/403002
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
As for NVMeoF controller, SPDK always set volatile write cache to
present, so OS may submit FLUSH command to backend block device,
while here, return success for those block devices which can't
support FLUSH command.
Change-Id: Ib764503f1986e7e0a38a1751a91d6c11e1b78865
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/402653
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Automatically detect more whitespace errors.
All existing cases are fixed; only whitespace change (verify with
diff -w) except for one comment style fixup in include/spdk/nvme.h.
Change-Id: If750e54b9c8e3421ea6feda5f20184a31431631e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402360
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Currently, this just reports the EUI64 and NGUID types, which are
already available in the Identify Namespace data, but this sets up the
framework for reporting a Namespace UUID (which doesn't have a
corresponding field in Identify Namespace) in the future.
Change-Id: I758e6d402ff874d65eca3f1db98d92c1a3f7a11f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/400893
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Ctrlrs list maintanined by the subsystem structure should be operated
by the thread which creates the subsystem. And this will make the
operations correct.
Change-Id: I7f881a77b1846658b3acd4270b74f86816e87803
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/401541
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Purpose: To make the nvmf subsystem management correct
in next patch.
Change-Id: Ie5433f3a7d47f05c5949dfc723aba73465623f88
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/401540
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Three new RPC methods are added to allow modification of the NVMe-oF
subsystem allowed host whitelist at runtime:
- nvmf_subsystem_add_host
- nvmf_subsystem_remove_host
- nvmf_subsystem_allow_any_host
Change-Id: I5c98658f949dad013165c04497cca49867022ba0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/396063
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add optional parameters to namespace creation to let the user pick the
namespace globally unique identifier and EUI-64.
Change-Id: Ia3eebaf22f8a64733a00a83f90cafb4977c2d07a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/399531
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This will allow more parameters to be added to
spdk_nvmf_subsystem_add_ns() without breaking API/ABI compatibility
later.
Change-Id: I6b2f58f1a2d5fcd4c754830cbd4713dc461a31fc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/399519
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The subsystem->ns array may be resized with realloc(), so old ns
pointers can become invalid.
To fix this, allocate each ns as a separate object, and change the
subsystem->ns[] array to point to the namespaces rather than containing
them.
Change-Id: I873502fa90cf840e4eaa9b1abd94a95afe0f737f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/399726
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch is used to solve
https://github.com/spdk/spdk/issues/235
With multiple core bining for NVMe-oF target,
the qpairs which belonging to the same ctrlr may
be scheduled to different cores. Thus there is
resource contention to access the struct spdk_nvmf_ctrlr.
And we put the thread info in polling group. Morever,
we introduce an admin_qpair in ctrlr. Since admin_qpair will
always be created at first and freed at last, to reference
this pointer is safe.
Change-Id: I12ac26f9e65b4ed8e48687750046455af0e3be1d
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/398904
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is used to solve
https://github.com/spdk/spdk/issues/235
in the later patch.
Change-Id: I8ef6d3effbff7a6b27e82c397969687d0000542b
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/399349
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reason: In spdk_nvmf_subsystem_destroy, we call
spdk_nvmf_ctrlr_destruct(ctrlr), and this function
will still use the transport, so definitely, it is
a defect(reproduced in my platform).
So we need to defer freeing the transport resource.
Change-Id: I3eee2a29c223e2759a623604485af6f081746581
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/399368
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I53ffdd061ba068070f66a752780229ecfe53e737
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/398688
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Don't allow a duplicate listener to be added to a subsystem.
Change-Id: I1a5f2ae09146a31859921430fb716a36d7f2048e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/398652
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The type of a queue is purely a function of its queue ID.
Add a helper function, spdk_nvmf_qpair_is_admin_queue(), to make the
logic more obvious (akin to nvme_qpair_is_admin_queue() in the NVMe
library).
Change-Id: I7cf5a82d1e3dc50834cc2ff03f5f88c5719c6952
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/398663
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: Id1e2a7da0db319c4d43988ec4991462fc956dde2
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/398542
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add a check when adding transport in the poll group.
If already there, just return.
The poll_group_add_transport operation can be called
at the poll group creation and target listen both.
Change-Id: I655d6fa97cafdc11fa23d199bdfe31350b920ca4
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/395039
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ia165c3f033658adc86c8993a2a32783921ab1832
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/396494
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idadd4eb7574b005cce8b888b28c8c3b6993343a4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/395555
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Caught by the latest scan-build.
Change-Id: I606a30447e5221c86e79accb9a2c1fe76e9eeee0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/396054
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Individual threads can now pause and resume subsystems
as needed, so the master_thread isn't used.
Change-Id: I49ccb1f87d3e5956db7bd8fc9da0542c5c487923
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/394260
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use the general purpose mechanism to pause a subsystem when a bdev
is hot removed.
Change-Id: I3cd4fb15140d6682707b7840c6a9c3f63fe48e55
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/394259
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
When the state change is known to fail immediately, use
a return code instead of calling the callback.
Most of the callbacks didn't actually check for errors,
so this patch also doesn't check for errors on return
codes. That should be done in the future.
Change-Id: I67e03f93d7f53892473dfc073f4150e7e620cad2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/394281
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Eventually this should probably queue, but for now
just fail these commands.
Change-Id: Ie1b1088aa38198c17062ac9874539ad6d99b01eb
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/394125
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
These commands can now pause a subsystem if they need to operate
on it. We don't currently implement any of the NVMe commands
that would need to pause, so this patch is simpler than most
would expect.
Change-Id: I25bfdf8e7577cda2bb0ce248d2889447032b9b4c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/394121
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The thread variable defined in the struct spdk_nvmf_rdma_qpair is
not used. Just remove it.
Change-Id: I5f406ff276733cc9474a997b3c18d23c7420cac8
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/394152
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The NVMe spec states that nqn names are to be encoded in utf-8. The
prefixes of all nqn's are already required to be ascii by virtue of
their structure so they are already valid utf-8, but the user specified
strings should be checked for valid utf-8 strings.
Change-Id: I20090d366e93e98af4932eaa120d4edb6e512206
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/394118
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Purpose: If the qp creates in a failure state,
we should set cm_id = NULL, then we do not need to
destroy the qp which is not created.
Also this patch add return value check while calling
spdk_nvmf_rdma_qpair_initialize.
Change-Id: I084c186738fcf6079cb36666f68e10b906e77145
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/394016
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added tighter regulations to the NVMe-oF nqn checking to conform with
the nvme 1.3 spec. including, adding checks for valid nqn's in the case
of a generic uuid based nqn and checking for reverse domain name and
colon prefixed strings in a user specific nqn. Unit tests included.
Change-Id: I3ee4b269d0655ac9968699617e43e3297695c7ed
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/393265
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch remove need for additional buffer when translating error code
to string.
Change-Id: Iaa60088b5c450581d3cdddbb425119b17d55a44b
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/386114
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Only Makefiles for libraries that directly depend on DPDK (rather than
the SPDK env abstraction) should add $(ENV_CFLAGS).
Change-Id: Ifdf44d3ef8c42bbf7f20edd524b330d00658235b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/392818
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows the user to pause a subsystem, make some
modifications, and then resume it.
Change-Id: Ia18371023d8fc66e1797fda293a01b68c0a61c96
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/392422
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I366b941a60d1fb00951591e7f631a65e8a449904
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/392566
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: I102954505c2c53458aae30f6d15b46e008355501
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/392565
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The outstanding r/w requests counter is not decremented
back if IB r/w request fails.
As the result, the rdma qpair stops pumping the requests
after the number of ibv_post_send failures reaches
the threshold for outstanding r/w requests for that qpair.
The patch decrements qpair's r/w counter back in case of
ibv_post_send returns an error.
Change-Id: I8fa0f2905974a50037034962e4d2a001290a06a9
Signed-off-by: Philipp Skadorov <philipp.skadorov@wdc.com>
Reviewed-on: https://review.gerrithub.io/391799
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This greatly increases the efficiency when the target is scaled
to many connections. Now all connections being handled by a given
thread can be polled in O(1), whereas before it was O(n) where
n was the number of connections.
Change-Id: I9f695f68093d73e6538df416b0f1aabef07119ff
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/391491
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add pointer of subsystem in namespace data structure, then we can remove
the spdk_nvmf_subsystem_add_ns_ctx.
Change-Id: I2d024f10d35fdac64fc34d0cb6523cfca74a8164
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/391697
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
While iterating, allow the user to perform asynchronous
operations. To continue iteration, the user is expected
to call spdk_for_each_channel_continue.
Change-Id: Ifd7d03d5fbf17cf13843704274b036d49ca0484a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/391309
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Add functions to iterate the list of subsystems for a given
target.
Change-Id: Id3831f656033092224168b353788ae87238bf800
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/388294
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now rely entirely on the user to create and poll
the poll groups.
Change-Id: I66baaa2d0f493390a055a32e6c902f5e2f574534
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/385954
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Disallow multiple I/O queues for the same controller with the same queue
ID. NVMe-oF 1.0 ECN 001 specifies that this condition should return a
status value of Command Sequence Error.
Change-Id: I41126ddec388a985c403025e099ab15da5d3987c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/390662
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Disambiguate the log components from the trace functionality
(include/spdk/trace.h).
The internal spdk_trace_flag structure and related functions will be
renamed in a later commit - this is just a find and replace on
SPDK_TRACE_* and SPDK_LOG_REGISTER_TRACE_FLAG().
Change-Id: I617bd5a9fbe35ffb44ae6020b292658c094a0ad6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376421
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I8b77f8aa8e20a277d0a5e53688d7cef8674d6244
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/390497
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Move some of the code out of the function and rename it
to spdk_nvmf_rdma_qpair_initialize. In the future, the
operations left in initialize will end up being
deferred until the qpair is assigned to a poll group.
However, for this patch there is no functional change.
Change-Id: I0f64489ffbf1f8957358d3b1781acc430b77717c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/389650
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Some places used the convention 'rqpair' and others
'rdma_qpair'. For consistency, name them all 'rqpair'.
Change-Id: I131833d14efdfdbcbb99bea5d64cbcf99d9ec90b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/389649
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: I9afa07b5dae99955ba87d7c8130b2ce6f04e7941
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/389641
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
There is a 1:1 correspondence between the two, but it is much
more useful to have a pointer to the poll group.
Change-Id: I8494b0573a9b2cce5819545548d0c65a18bdbe86
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/389640
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
These aren't used quite yet, but they'll need to be called
by the user's application.
Change-Id: Id1fc44859350451a3e224f725add60d3a878d077
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/389639
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
There isn't a way to remove a namespace just yet, but at least
adding one works.
Change-Id: I99416d1bc9cbc0e2303c16040d2311a07829cbea
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/388293
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
As of this patch, it is unused.
Change-Id: I15f42b8cc43e3792ae69c91f3911b7853d5b5664
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/388292
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It has all the same properties of uniqueness, so
implement it as an io_channel to take advantage
of the other infrastructure for message passing
already available.
Change-Id: I1777b91f0597a5a43ac0d0bbfdf878e874eb04f3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/388291
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This correctly puts all of the I/O channels on the right
thread during shutdown.
Change-Id: I432c8cb981a68b40639f8876dae42597a9e6a85f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/389637
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently SPDK NVMeoF will allocate data buffer from mempool, however,
some data buffers may not block size aligned, this is okay for NVMe
backend but will fail for AIO backend. 4KiB aligned data buffers
should be okay for most AIO backends.
Change-Id: If7b9c2962d716addbd755e80e59620377f2ba488
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/389245
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There are two ways to set stockets to nonblocking type:
- ioctl with FIONBIO
- fcntl with O_NONBLOCK
Those two should be equivalent for sockets used in SPDK.
During testing it was shown that VPP interprets only
the second type, so this patch changes all occurences of it.
When here, more descriptive error logs were set in case of
failure.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ifa5b30e3a4fa04fe23f41fa2ae9dab4b01dd7d3c
Reviewed-on: https://review.gerrithub.io/388816
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This simplifies the public API and requirements for
user applications.
Change-Id: Ibb0d25a7838a0fa683f39e79cb4fef78adf6aee8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/388040
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
We probably do not allocate the mgmt_channel when we destroy the
rdma queue pair, add the judgment before put the io channnel.
Change-Id: I528c9686907c04c5025ff9d3872f24f2996e9d33
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/388159
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This helps enforce uniqueness of the subsystem id and
allows for quick lookup by that id.
Change-Id: I4d2948892839d42b8c2b2a406682848415ad2bd6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/376251
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The end goal is to have the application create one poll group per core.
Then each poll group will have a single CQ per network device and an I/O
channel per back-end storage device to poll.
This is just the first step toward that, which is to wire up the
creation of the per-core poll groups in the application.
Note that the app poll groups don't do anything yet. We'll need
additional library API changes to make the library use the existing poll
groups, rather than creating a new poll group per subsystem as we do
right now.
Change-Id: I2d4e2a5e5aa354d37714750f1d5b1d1e4ab9edce
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/381887
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
According to the current code, rdma qpair is always created
by the thread on acceptor_core, thus we need to
change the related I/O channel during polling if the core
configured for subsystem is not same with the acceptor core.\
With this patch, we can run NVMe-oF tgt with multiple cores,
and each subsystem can configure different core to handle.
Change-Id: I6163a871f65115e545a4f3fd9cc46b3bafb13249
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/383683
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibdfa8be770d7bfcb2baaf29fa5b32dea064ffbd0
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/383383
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I65e84971f2d55f27b0c0c1a1b226fc4da4b3cf89
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/382763
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Our previous implementation makes the buffer allocation
in an unfair way and this patch can solve this issue.
With this patch, we can use limited buffer to support
high I/O depth.
Change-Id: I0e7a073c0b4539090218aa461d50620287bb4b63
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/382528
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For the normal case, we can avoid re-adding it into
pending data buf list if there is no buffer.
Change-Id: I400e3c6c60bb1d1df13782faf2dd32ca2bd897a3
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/382402
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A few small tweaks to make this function easier to read:
- Return void (the return value is always 0 and never used)
- Split out Fabrics/admin queue processing 'if' block
- Remove unnecessary switch on status (it can only be 2 values)
Additionally, simplify the I/O command checking logic: we don't need to
check for CC.EN = 1, because it is only possible for I/O queues to be
created after CC.EN is set to 1.
Change-Id: Ib4c39a6e0d9e28912dbb0f0737fd223be0a80207
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/379218
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
FFFFFFFFh is reserved for the broadcast NSID and can't be used as a
NSID for a specific namespace.
Change-Id: I64a3cc80993d7b34324823462f4d992d1415773f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/378849
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is the final set of command processing functions (admin and I/O
commands were already handled in ctrlr.c), and it allows us to clean up
the ctrlr.c API some more.
Change-Id: Ic73c56c44d7fd64bfaa72b6f5f6f0984b4dfa053
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/378018
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Combine nvmf_process_connect() into spdk_nvmf_ctrlr_connect() to
simplify the logic and keep it all together in one function.
This also allows us to move the invalid connect helper function and
macros back out of the header into a static function in one file.
Change-Id: Ia3bd80d0309392520d51bf8f5830d3f23332c5e3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/378016
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
These are not used in the current code.
We introduced the concept of a subsystem ID to prepare for a future
scaling strategy, but the poll group scaling strategy turns out to
not need subsystem IDs.
Change-Id: Ibd27cc0d446c7cda34db76787e1e9c233c399f44
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/378015
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This moves the subsystem->ctrlrs list management fully into the
subsystem code, which will help simplify thread safety considerations
once we start adding locks.
Change-Id: Ibc118923f1bd520f1e524cde5d45ccfcc69aee1e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376025
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Previously we made cntlid globally unique as part of
a strategy for scaling connections that never panned
out. Now, we have a new strategy and don't need cntlid
to be globally unique, so relax the restrictions
and simplify the code.
Change-Id: I167772f5e7d37183715bf9967b0102529144bb2b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/376250
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The NVMe-oF 1.0 spec says:
"The NVM subsystem shall not allocate a Controller ID in the range FFF0h
to FFFFh as a valid Controller ID"
Change-Id: If0b7dc4948e40b3bdf370a1da97199a25d362e71
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376247
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Avoid having to look up transports during discovery later.
Change-Id: I0207a822f05b02de4798d3e966603c073ea14062
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/377991
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: I743f5e4d1c24ad5ef9f1fef4c2678e347b179a9f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/377260
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This makes it easier to unit test the individual functions and also
easier to follow the logic.
These helpers will also be used in the upcoming Write Zeroes function.
Also cleans up the variable names to be consistent with the rest of the
code.
Change-Id: I69847b6a052fb7baff058ed8e5b79904ddf2ec6d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/377259
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The current hot plug support assumes only one thread
can access a subsystem at a time, but now that we're
changing that this will need to be reworked. In the
interest of making it easier to change the threading
model, remove hot plug support temporarily. We'll add
it back in once the threading model changes are done.
Change-Id: I15b75b402b85aa62f5ba864a64cde1de3cdb4ba3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/376417
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I73cf34e0184f67a855afe980f5645df25baf4714
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/377652
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
clang 4.0 introduced a new warning, -Waddress-of-packed-member, which
triggers on a couple of spots in NBD and NVMf. Fix them up to silence
the warnings.
Change-Id: I134618f93528ea9a3d08050c34056670a58abdab
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/377441
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I46dea98bf762967d49867e428f8ce6b3ec881072
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376257
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These were duplicated in ctrlr.c and request.c; pull them into
nvmf_internal.h so there's only one copy.
Change-Id: I00d499dd17689e907c182d01e61bde075d217af8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376020
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
The previous behavior with an empty host NQN whitelist was to allow any
host to connect.
Change-Id: I5401e52d96642cf20afe0d50c692613e67262edf
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376432
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is not a public API, so simplify the number
of internal header files where important types
are defined.
Change-Id: I115d0497d37e3cfe399c3a5b2546d20aa4fe24b4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/376249
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We are still creating one poll group per controller,
so this isn't particularly useful just yet.
Change-Id: I65c54385bdba587d4b1098629727877970d39277
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/376241
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The requests are now sent using spdk_thread_send_msg
internally, so the user no longer needs to supply
these callbacks.
Change-Id: I84b0f5f0f1f6fa6eaf9a717934925d3ad802fcfd
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/376240
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Instead of polling each individual qpair, polling is now
done by poll group. This allows transports to use more
efficient polling schemes in the future.
The RDMA transport as of this patch still just loops
over each qpair in the group and polls it individually,
so this patch results in no performance change yet.
Change-Id: I0f63f0dbbc5fd43c1e0d9729b10b37c2cb0d9881
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/376239
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently they're entirely contained within a single
spdk_nvmf_ctrlr, which won't span devices, but this
sets the stage for a more flexible library.
Change-Id: I653f3d6fe4187f4eaf18cda0a6960040ba6952d7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/376238
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This prepares us to fan out I/O qpairs to other cores
Change-Id: I3e9a60226cddf3ccd26b7ad121775ee36f07e6a9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375480
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It isn't referenced directly anywhere but the unit tests, so
now we can remove it entirely.
Change-Id: I92bbf0e15ecffe2fbbdf5eecc29b6ef0e2fd5baf
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375462
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Everywhere this is used, we can just use
spdk_nvme_transport_id instead.
Change-Id: I407c812cd6a1ca3afcb3d1fe87c7e22183b09d7a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375461
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also, move it to the appropriate compilation unit. Further,
remove use of g_nvmf_tgt.
Shift the function to a new compilation unit as well.
Change-Id: I1a43ff366532b450f00aed54a290fb9eed9bf453
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375455
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The target is accessible through the subsystem.
Change-Id: I69616df48185dbfcbe7c90ca6948457a412c6666
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375454
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This matches the name to the behavior and prepares for addition of a new
log macro for "info" log level.
Change-Id: I94ccd49face4309d3368e399528776ab140748c4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375833
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For admin commands with controller to host transfers, make sure no
uninitialized data is returned to the host. This allows us to remove a
few other memset()s in per-command handlers.
Change-Id: I00ef42945a118b6e7a0b68ab21c59fdcd21d0ee2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376024
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows the user to configure an arbitrarily large number of
namespaces instead of the current hard-coded limit of 16.
Change-Id: I3a29b0de10eafd682b12c54e12411d1f9d41ce85
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375636
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is useful for places that want to use the size of an NVMe
spec-defined field without having an instance of the corresponding
structure.
Specifically, we can use SPDK_NVME_CTRLR_SN_LEN to replace MAX_SN_LEN
in nvmf.h.
Change-Id: Ida3d59470cce58c0fe984601aa9e2e05cdfaa741
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375467
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use the version #defines from spdk/version.h to build a firmware version
string for the virtual NVMe-oF controller model.
Change-Id: I18285cfa75c8915a7db46d4d79c0447392bd5d8c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375252
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function accepts new connections, so use the more
traditional name.
Change-Id: Ie4aaa4b1d6da81f81fa3cd1505e5ac45e157f052
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375205
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I19d1866fb90ffd3e3543ccc66a098571ade3e3de
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375203
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also, move the implementation into the appropriate
compilation unit.
Change-Id: Ie1c56bc5e077b81d744414716f9267ceaf591e49
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375034
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The user can now specify which target they want to
search for the subsystem. Also, change the name to
spdk_nvmf_tgt_find_subsystem and put it in the correct
compilation unit.
Change-Id: I7c085959814c14d8400a0ba2572103b0814a4d0e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374879
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The user can now specify which target to create the subsystem
on.
Change-Id: I6206c0d762d59ff6312cb58d36180281baaa7266
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374878
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This new function returns a reference to the target
object. This sets the library up to support multiple
targets in the future.
Change-Id: Id803dbcbb166eca33d8d5c381d9db97628606f3e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374877
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This eliminates a couple of references to g_nvmf_tgt
and sets the stage for eliminating that global entirely
in the future.
Change-Id: I068d0874cc8ba122be780e8dbd55bb1efabe10b7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374876
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The list of options is going to continue to grow, so avoid
constant API churn by adding an options struct.
Change-Id: Ie9e7248281726d4aee42b3519fcf7535ba01ee34
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374872
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now the user only sees an opaque structure.
Change-Id: Ie73b4bb0157228bbcab1b3c211d7383f881fd07e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374708
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Hide the implementation of spdk_nvmf_listener.
Change-Id: I62d46c76be0962b4246d1b7774ce8249b5baa039
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374871
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Hide the definition of spdk_nvmf_host. Add accessors
for the necessary data.
Change-Id: I28f5b8d243cb1b299724a1dd32fcf2f2bd95e1f9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374870
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a new struct spdk_nvmf_ns to hold namespace information, and add
accessor functions so that it can be moved out of the public API in
future patches.
Change-Id: Id926aaa3cc279649057afc65e08024628edbc435
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374740
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Discovery controllers only have an admin queue.
Change-Id: I5d5a018a7df40164838a4b03f7f106a96db7e33b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374736
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now that the discovery controller is using the common admin command
functions, move all of them into the common ctrlr.c file.
This also eliminates the subsystem ops, which are now just direct calls.
Change-Id: I0a25a61e0ad8742d3d76a3cacd46db4701fc7d63
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374733
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Formalize a state machine around request processing.
The state is advanced by calling
spdk_nvmf_rdma_request_process().
This clarifies the implementation considerably and
cleans up a few corner cases. Unfortunately, the diff
is also enormous and there does not appear to be a
way to reduce it.
Change-Id: I5741da24bcffc1aef367ebfe3dd1f589c5746901
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374540
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This function also looks suspiciously generic and can
probably be moved to general nvmf code in the future.
Change-Id: I7849d2d7952b245a065393ce4be5d5e05c8bd8c2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374539
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This can probably be moved to the generic nvmf code
in the future, since nothing about it is RDMA specific.
Change-Id: I99103e174d99a619d36e519820a8a8a9b56473ac
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374538
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also remove the stored controller data from spdk_nvmf_ctrlr and instead
generate up-to-date information every time the command is called.
Change-Id: Icdcc7c826eff25711c6700d12089a86a8dedee54
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374559
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Both regular NVM controllers and discovery controllers implement the Get
Log Page command; combine the implementations into one in ctrlr.c.
Change-Id: I7fabf40ec52d8738263ac152afe9cd7773ff7fbd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374555
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Simplify the initialization of controller identify data and properties.
This is mostly common between discovery and NVM subsystems.
Change-Id: Id8074d5260213e32892fd77845884a80071c9d88
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374534
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I50be9315d19c4189140f79634841ee53315470cf
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374533
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously, the shared buffer pools were allocated on the
nvmf controllers. When a new connection was established,
the CONNECT command needs a 4k buffer, but we didn't know
which nvmf controller it belonged to until after the
CONNECT command completed. So there was a special case
for CONNECT that used in capsule data buffers instead.
Now, the buffer pool is global and always available. We
can just use that always, with no more special cases.
This has the additional nice side effect of allowing
users to run the target with no in capsule data buffers
allocated at all.
Change-Id: I974289f646947651c58d65cf898571d80e9dee9b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374360
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This is old debug code that isn't needed anymore.
Change-Id: I2c9ab9b3a63178169c48342bfacb39c59f261087
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374359
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The memory maps are device specific, but the buffer pool
can be shared across the entire transport. The size
of this global buffer pool isn't currently configurable,
but needs to be.
Change-Id: Ia32a11c7de5b63250bc22e80ccfe33d780e9bd5e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374373
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I82afad8a8607d4cd12e2e13c763fb5ecb041bb4a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373663
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
replaces all references to strerror in the spdk lib directory with
references to the thread safe strerror_r
Change-Id: I80d946cce3299007ee10500b93f7e1c8e503ee41
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/374012
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I6a733ab00b61866d68d584a330020b9cd29e25b8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/373840
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It wasn't used anywhere.
Change-Id: I1ea580af374c730d8e6336a6a3db6c05116e6dba
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/373839
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Port is a more commonly used term.
Change-Id: Ia85a49b8e36ab73d777a905081f1584811b8cdec
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/373838
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There is one of these per ibv_context.
Change-Id: I660fed954c5a77fed9a6bda2321583ef05b30439
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/373837
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The transport API now allows for multiple transport
objects, so allocate them on demand instead of using
a single global.
Change-Id: I5dd35f287fe7312e6185c75ae75e2488ec8cc78e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371990
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For now, this is a name change of controller to poll_group
in the transport layer. Over time, the poll_group will
become a more general concept than a controller, allowing
for qpairs to be spread across cores.
Change-Id: Ia92a2934541ad336f462f73175d53aaaf021f67b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371775
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I10857de922d5a17131910aca92c73995ea6ab8f6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/373828
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If a bdev-based controller is partially set up but then needs to be torn
down due to an invalid configuration, the nvmf_bdev_ctrlr_detach()
function could try to put a NULL spdk_io_channel.
Add checks to avoid releasing resources that weren't allocated yet.
Change-Id: I779c80f4dc654af3c4b0a49d8d216e13ab5f8333
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373390
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There are now three simple functions on the transport:
listen(transport, trid)
stop_listen(transport, trid)
accept(transport)
This makes the code quite a bit simpler.
Change-Id: I550343a084b5c095240703952c8c07ae535b5c16
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371774
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Instead of scattering direct calls to the function
callbacks throughout the code, add some wrappers.
This will make some later refactoring marginally
easier.
Change-Id: If735089967e3ce828dcff68f2430e7810bf2f123
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371749
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Create one transport per nvmf target. Today, there is just
one global nvmf target, but this paves the way for multiple.
Change-Id: Iaa1f8c5e7b3c1e87621ef2a636c68c2dd8fd929e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371748
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Match the terminology used in the NVMe-oF specification,
which is queue pair. For the RDMA transport, this maps to
an RDMA queue pair, but may map to other things for other
transports. It still is logically a "connection" from
a networking sense.
Change-Id: Ic43a5398e63ac85c93a8e0417e4b0d2905bf2dfc
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371747
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is just a rename - the functionality hasn't changed.
Use the same terminology as the specification (which is controller)
so those familiar with the specification can more easily
approach the code base.
This is still conceptually equivalent to a "session" in the
networking sense.
Change-Id: I388b56df62d19560224c4adc2a03c71eae6fed0d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371746
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The NVMe-oF target was written before we defined
spdk_nvme_transport_id. Now that we have it, go back
and replace all of the locations where we individually
tracked traddr, trsvcid, trtype, etc. and use a trid.
Change-Id: I84334a12c7581f414c1e84680f122fe885a3b9dd
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370744
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ie05f58e677107072fea6cc7702bab47a077cb595
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370743
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This is far simpler, although it does limit the bdev
layer to unmapped just one range per command. In practice,
all of our code reports limits of just one range per command
anyway.
Change-Id: I99247ab349fe85b9925769e965833b06708d0d70
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370382
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There is now only virtual mode. Virtual mode has been
improved enough to reach feature parity with direct
mode and performance benchmarks show no degradation.
Simplify the code by always using virtual mode.
Change-Id: Id5cdb5d4d8c54e661b245ed7250c2f9d66ca2152
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/369496
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add a new struct spdk_nvme_io_qpair_opts to allow the user to override
controller options on a per-I/O qpair basis.
Existing callers with qprio == 0 can be updated to:
... = spdk_nvme_ctrlr_alloc_io_qpair(ctrlr, NULL, 0);
Callers that need to specify a non-default qprio should be updated to:
struct spdk_nvme_io_qpair_opts opts;
spdk_nvme_ctrlr_get_default_io_qpair_opts(ctrlr, &opts, sizeof(opts));
opts.qprio = SPDK_NVME_QPRIO_...;
... = spdk_nvme_ctrlr_alloc_io_qpair(ctrlr, &opts, sizeof(opts));
Change-Id: I8ac3ea369535cfde759abbe75e1d974b6450a800
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/369676
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This enables checking permissions - for example,
spdk_bdev_write will fail if the descriptor was not
created with write permissions.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I68b65a560f471f2e0f71a7f42cfa6689b911110f
Reviewed-on: https://review.gerrithub.io/369493
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Retire the old claim/unclaim semantics in favor of
open/close. Clients must now open a bdev to get
an spdk_bdev_desc, then pass this desc to get an
I/O channel.
This allows multiple clients to open a bdev,
although only one may open a bdev with write
access.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4d319f1278170124169a8a75fd791e926b3f7171
Reviewed-on: https://review.gerrithub.io/367611
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This allows the user to optionally specify the address family for
construct_nvmf_subsystem (default is IPv4).
Note that the RDMA transport still only supports IPv4 because of the way
it binds to the listen address; this will be fixed in a separate patch.
Change-Id: I534ed75f6f81e53559d1bebcd2f34f1a2b210a97
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/367429
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add handling of the Abort command in virtual subsystems. This doesn't
actually abort any requests - the spdk_nvmf_request_abort()
implementation just fails all abort requests - but at least this gives
us a place to hook up actual abort handling later.
Change-Id: Iafaa393c6f9e7f404af91747cbd81c64ab4810bb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/365905
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Now that virtual mode namespaces can be chosen arbitrarily, there can be
holes in the ns_list. Make sure all of the virtual mode code paths are
prepared to handle these inactive but valid NSIDs.
Change-Id: I0d70fd9dae37a29a8358e1d38dcc6cac3237fd9a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/365717
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It is not actually useful to be immediately returned
a handle to the bdev_io. There isn't anything valid
that the user can do with it at that point. Instead,
return an integer error code.
Change-Id: Iffa9a8dc5b2eefab57e3cc1f68919985431d17d1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/364137
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I338f47000a1c898309a7421fe52f148bae9f2e6b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/364116
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I61b6579e8698d16e5a8ab74d304af9ea53f9dce4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363307
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also move the validation of serial number length into the library.
Change-Id: Ibc9384fc1fccb87bd15b75da7f3942570900bd96
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363304
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ic1b7b1b6497dbae5ceda9bb91f9d4d2037b7243f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363301
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_nvmf_subsystem_exists(nqn) is exactly equivalent to
spdk_nvmf_find_subsystem(nqn) != NULL.
Change-Id: Icafa43166c99d1364b49cef30a5ade4b6625bcd5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363299
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I02a44c3790830b3918dca418c6bb85e82ddac273
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363298
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This structure is not part of the public API and shouldn't be in
spdk/nvmf.h.
Change-Id: I29fbb269d3ab77cd9fa9908726abc7c7a4c6d8c1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363296
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
- rename spdk_malloc_socket to spdk_dma_malloc_socket
- rename spdk_malloc to spdk_dma_malloc
- rename spdk_zmalloc to spdk_dma_zmalloc
- rename spdk_realloc to spdk_dma_realloc
- rename spdk_free to spdk_dma_free
Change-Id: I52a11b7a4243281f9c56f503e826fd7c4a1fd883
Signed-off-by: John Meneghini <johnm@netapp.com>
Reviewed-on: https://review.gerrithub.io/362604
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This wasn't used anywhere and we currently believe there
are superior software-only techniques for controlling
quality of service.
Change-Id: Icdadd5870ed0629b338c307d2619bbc242c3e7a3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/362065
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The user should not see the bdev_io status directly; the NVMe and SCSI
error code wrappers provide the ability to translate to the desired
format regardless of what kind of error is stored inside the bdev_io.
Replace the spdk_bdev_io_completion_cb status parameter with a bool
simply indiciating whether the I/O completed successfully.
Change-Id: Iad18c2dac4374112c41b7a656154ed3ae1a68569
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/362047
Tested-by: <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
An ECN to the NVMe 1.3 specification has clarified that the NQN may
contain 223 bytes before the null terminator. Make all of our NQN
length checks consistently enforce this behavior.
Change-Id: Iebfd57d11abea64964c7a6ad9d886e40efa243c3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Replace with it with check the returned req
via spdk_unlikely macro
Change-Id: I1202b3955af9a68496d8ced7cf66c20cf26f7fff
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Fix up all existing spacing errors in comments and add an automated
check for patterns like /*comment*/.
Change-Id: I28f61c93612dc0f8aed66bd509da78e91ea9737e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Attempting to add a listen address for an unavailable transport will
fail with a better error message.
Change-Id: If4cf5b66c16dadcb6e0f0b28cea4aa510ba6a9fc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Rather than failing silently, let the user know why the listen address
failed.
Change-Id: I41c2a51c6071ee739b282a1a39198a2887a73c4d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Simplify code that previously needed to check for subsystem type by
factoring out the discovery controller operations into a new ops
instance.
Change-Id: Id87b498e4623451993fe779ffb765be5a6743fd9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
No functional change, just rearranging code.
Change-Id: I28328dfefd7de269d326834c484f2c2fca4e6c1f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
When data needs to be transferred from the controller
to the host, do a single ibv_post_send containing
both the data and the completion.
Change-Id: I072c545b31593e0e324c97ed700b42c6a4c358e1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This call had been reduced to a simple wrapper
around the ibv call. Delete it.
Change-Id: I42926d123db262617119a9cff77bc0d0eb1e8f31
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
These functions were only called from one place and
their functionality has been reduced to a wrapper
around the underlying ibv call. Remove them.
Change-Id: I65182012dbe6393b9d57f4191fd327bcd025a6c8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This keeps all SGL handling in the prep_data function.
Change-Id: I9bfeed3748c1b329288350b85aa87bd604cfce4e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Now that all of the SGL mappings are static,
this function just called ibv_post_recv. Delete
the function and call ibv_post_recv directly.
Change-Id: I45216170a157709249b08c4cb0ebdb1adb906049
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
For an NVMe read, send the completion immediately
following the RDMA WRITE, without waiting for
the acknowledgement. RDMA is strictly ordered,
so the WRITE will arrive before the completion.
Change-Id: I7e4e01d7a02c2130b655ef90f5fdaec992d9361a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Except for a CONNECT capsule, always use the central data
pool for RDMA READ/WRITE operations. The in-capsule
data buffer is associated with the receive operation
while the pool data buffers are associated with the
completion, and using the in-capsule data buffer
causes a lifetime mismatch.
Change-Id: Ieb45e521d78daa7c706078a3dd5c5a146f8dc1d6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
After commit b654e9b, this is no longer required.
Change-Id: I0cf1a7059d7fba0303aca5ad5a15afe3890b4172
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The RDMA protocol this module uses is strictly ordered,
which means messages are delivered in exactly the order
they are sent. However, we have detected a number of
cases where the acknowledgements for those messages
arrive out of order. This patch attempts to handle
that case.
Separate the data required to post a recv from the
data required to send a response. If a recv arrives
when no response object is available, queue the
recv.
Change-Id: I2d6f2f8636b820d0c746505e5a5e3d3442ce5ba4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This clarifies the relation between the values assigned to sg_list and
num_sge (no functional change).
Change-Id: I8e81d47dd97a033b17cd3b813b06e4887127146c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The mappings are all static, so it isn't interesting
to print them out on each I/O.
Change-Id: I85301b4518d4523a7c031f6ca9ff678d91428504
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This allows pipelining of READ/WRITE with completion.
Change-Id: Ib3ab5bffb8e3e5de8cbae7a3b2fff7d9f6646d2d
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
This allows static initialization of the scatter
gather list as well as future optimizations
around pipelining commands with data.
Change-Id: I8af8f3e3425610bc720677c9bc84f163cfb6278a
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The first version of the Linux kernel NVMe-oF initiator had
a bug when reporting queue size where it was off by 1. We
had a workaround to deal with this. Now that the kernel
has been fixed, remove the workaround.
Change-Id: I0ad4a5c6db68cfa9683ab93e6f5210772c713b55
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The sq_head handling is already done in
spdk_nvmf_rdma_request_send_completion, so do not need to
do again.
Change-Id: I527ff8adfcbdf43ac79794cb5c7777c0e8ef6973
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Previously, if the maximum number of virtual namespaces had already been
reached, adding a bdev to a subsystem would claim it without actually
adding it to the ns_list array.
Change-Id: Iab68ad1a75748c0e88232240185695aac08d71d2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
SPDK_COUNTOF works like sizeof, except it returns the number of elements
in an array instead of the number of bytes.
Change-Id: I38ff4dd3485ed9b630cc5660ff84851d0031911f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
It is no longer used now that AER handling holds the request until it is
triggerred.
Change-Id: I71a75e86f82bc06f677cf26defa701e60b9aa1bd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
After checking the code, aerl in our session is 0,
so there will be only 1 AER. So currently,
we will only handle 1 AER case.
When the AER event is triggered by real NVMe device owned
by the subsystem, it notifies all sessions belonging to
the subsystem.
Change-Id: Ia80fb0f03e893c20d8dd14afbed8db10db38301c
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The wr_id should never be NULL - it will always correspond to a request
we previously posted. Convert the check to an assert() so we notice if
this ever happens (which would indicate a programming error somewhere
else).
While we're here, add a more robust check to make sure the request is
actually in the correct array of requests for the connection being
polled (also in an assert, since this should never fail in normal
execution).
Change-Id: I855763d7d827fb8cf00a775c7bc2ccb579db8d0f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Kernel nvmf host always tries to connect nvmf target
when we does not issue nvme disconnect command. Thus,
we face rdma_create_qp issue, the reason is that we call
rdma_listen too early, and the event retrieved from
rdma_cm_get_event is too late.
And this patch solves this issue.
Change-Id: I153a8aea7420a86a236301dad9bd54af97f60865
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Calling spdk_nvmf_request_complete to complete spdk_nvmf_request
causes some fields in completion queue entry not set correctly.
Calling spdk_nvmf_request_complete fixes the problem.
Whether a nvme command having data transfer cannot be completely
determined by command opcode. For set features command, some features
don't require data transfer.
Change spdk_nvmf_request_prep_data to fix this issue.
Reason: the 4 fields of struct ibv_recv_wr is already
set in the following 4 lines.
Change-Id: I97437ee2e4c6e944154813bb48b1740b182220df
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The direct and virtual mode code is identical; move it to session.c like
the other virtualized get/set features.
Change-Id: I0a0e2dd795197c142ad5d9d0e4ddedb2aa5c8c2a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Even for direct mode, each session should use its own
async event configuration like virtual mode instead of
passthrough.
Change-Id: I9c1175f3677c672c0cad684341b8a46a575d753e
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
These were repeated a few different places, so pull them into a common
header file.
Change-Id: Id807fa2cfec0de2e0363aeb081510fb801781985
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The phenoemon is that we can not shutdown the nvmf tgt.
The solution is that we need to adjust the shutting down orders of
nvmf tgt subsystem and rdma trasport layer.
Change-Id: Ie39657370b1574960e0ee7cf604cc5872db0bed3
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
These strings are not modified by the functions they are passed to, so
they can be const char *.
Change-Id: I11532f232990a305d706c14aac1b0f8f93b8f576
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Avoid accessing the internals of the bdev_io from outside of the bdev
library.
Change-Id: I01dfc38b2520353ad42bcd8587b90f197eadf101
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
When we do frequent same subsystem add/delete,
we will face the adding issue. For example,
1 Add subsystem A
2 Delete subsystem A
3 Add subsystem A (Fail in this step).
The reason is that we did not correctly free
the listener resources of subsystems, and this patch
can solve this issue.
Change-Id: I6765a306a3f10c9a0f38c95dbba12e2a4073e705
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
64k sessions over the lifetime of a single target is something
that really could happen, so handle this case.
Change-Id: Iaed92b9ff6cd078fcd7c1efe88cf0c860c77c4ac
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This is not actually optional - it contains required
information for setting up the connection.
Change-Id: I21136de12794a0f4f5c14c5d3e2e3f2306c5c102
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This isn't used anywhere yet, but it will be for
NVMe-oF 1.1.
Change-Id: Ieae0688e6ad5b7a44568e5760382b5716b02e6f0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The code doesn't actually use this property of cntlid
for anything yet, but we will need it later.
Change-Id: I5fd514d75b903cc8769e7b9f196a4624e9cf876c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This prevents the need for bdev users and modules to manipulate the
internal bdev_io error.nvme fields.
For now, all non-NVMe error types are treated as a generic device error,
but translation from SCSI to NVMe could be added in the future.
Change-Id: I4e831b26a2f41bf2f405c7576d5019bb898d4d1b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Claim the block devices used by iSCSI LUNs and NVMe-oF subsystems so
they can't accidentally be reused.
This will also be used by virtual block devices to allow layering of
bdevs.
Change-Id: I5384923fbf24f13f4ce720a797c5a628053d49f4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use a plain function pointer + callback context for the bdev I/O
completion callback. This is possible now because each I/O channel will
be polled on the core that submitted the I/O.
Change-Id: I29ee8e4a3430df11c74845adab840395b9bc5010
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This allows the elimination of the spdk_event_get_arg1() and
spdk_event_get_arg2() macros, which accessed the event structure
directly; this was preventing the event structure definition from being
moved out of the public API header.
Change-Id: I74eced799ad7df61ff0b1390c63fb533e3fae8eb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Generate the full discovery log page in a memory buffer, then copy just
the requested part of it for each Get Log Page call.
Change-Id: I12730c59c0395cdac57aaab96337e938952e3011
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Note that the offset is not actually used yet, just sanity checked.
Change-Id: I9464dc934e94e3d38ac0d474fce876552650f92b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This allows hosts to determine when the discovery log page has changed
when reading it across multiple Get Log Page calls.
Change-Id: I3c3459959c6246a88938e4f82e3e0046419e7d00
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This keeps the existing subsystem list (and therefore the discovery
service log page) in order when new subsystems are added dynamically.
Change-Id: I071639be0fef4139f8f017b433185c786ae55378
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The emulated NVMe controller exposed by virtual subsystems does not
provide the Intel vendor-specific commands and behaviors, so it should
not use the 0x8086 vendor ID.
Change-Id: Iab4f0513d30f610feb62b1899da1b6316f11691c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The generic NVMe library controller initialization process already
handles enabling the controller; the RDMA transport should not need to
set EN itself.
For now, the discovery controller is cheating and not using the normal
initialization process, so move the EN = 1 hack to the discovery
controller bringup until it is overhauled to use the full
nvme_ctrlr_process_init() path.
The previous code where CC.EN was set to 1 before going through the
controller init process would cause an EN = 1 to EN = 0 transition,
which triggers a controller level reset.
This change stops us from causing a reset during the controller
startup sequence, which is defined by the NVMe over Fabrics spec as
terminating the host/controller association (breaking the connection).
Our NVMe over Fabrics target does not yet implement this correctly, but
we should still do the right thing in preparation for a full reset
implementation.
This patch also reverts the NVMe over Fabrics target reset
handling hack that was added as part of the NVMe over Fabrics host
commit to its previous state of just printing an error message.
Change-Id: I0aedd73dfd2dd1168e7b13b79575cc387737d4f0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This allows us to print better error messages when connecting to a
subsystem that exists but does not allow a specific host.
Additionally, we can now return the correct error code for a host that
is not allowed.
Change-Id: I16cd4ac2745cf50bb54601b464b0d23954f86fda
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The code in virtual.c and direct.c was identical - move it to session.c
to share it.
Change-Id: Ic6e4e9238e8ffacb212e76293c440109aa839f8c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move the current Virtual mode implementation to session.c and use it for
Direct as well.
Change-Id: I3f0ac93b4247b93d158b0dcb77e257b4b91be129
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Store the host identifier from the Connect command and report it via Get
Features.
Change-Id: I79bc27e05c5944549e7986aadb919c19748e7474
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Also return Invalid Field rather than Invalid Opcode to be more
accurate. The spec doesn't seem to define any more specific error code
for this case.
Change-Id: I992c6cca3020ff80b8495c71170222bc75316800
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
None of the log pages are actually implemented yet, but at the very
least, we don't want to leak random bits of uninitialized data.
Change-Id: Ic889260eb18d49122f2f250b645bdc5be3561dc5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Record the user-provided asynchronous event configuration set via Set
Features, and return it in Get Features.
This value is not actually used, since AER is not implemented yet in the
virtual controller model, but it at least implements the mandatory
Set/Get Features.
This allows the hack in the NVMe host code that ignored the Set Features
failure to be reverted.
Change-Id: I2ac639eb8b069ef8e87230a21fa77225f32aedde
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The SPDK_TRACELOG macro depends on a CONFIG setting (DEBUG), so it
should not be part of the public API.
Create a new include/spdk_internal directory for headers that should
only be used within SPDK, not exported for public use.
Change-Id: I39b90ce57da3270e735ba32210c4b3a3468c460b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The details of the structure were removed earlier, but
now remove all references even to a pointer to the
structure. The user can refer to transports by their
string name.
Change-Id: I273356f46329ea5372dcd951eda6f14767477d69
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This is a step toward abstracting away the definition
of the subsystem.
Change-Id: I88b2aa107b27152620f51a1ca2a153792b4c85e9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Print the error information when the kernel RNIC driver did not load
properly, and fix the cleanup logic for the exceptional exit.
Change-Id: I97a45e73d830280b994818f3defc491bc2b6b020
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
As we can support multiple sessions now for each Subsystem, the Host
will use cntlid field to create IO queues, if 2 different Hosts
connected to the same Subsystem, for IO queues' creation process, it
will use cntlid field with 0 for current code logic.
Change-Id: I6fd437892e8eb3146f62f4b211c0baadd70b505e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
The NVMe over Fabrics target was storing the PCI device pointer for each
direct-mode controller, but it only really needs the PCI address, which
is exposed via the get_nvmf_subsystems RPC.
Also update the same code path to use the new spdk_pci_device_get_addr()
function for brevity.
Change-Id: I0708b3331b7c279c1a86f0d7459b5deb40dd7c89
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
If the RDMA transport failed to initialize, g_rdma.event_channel may be
NULL.
Change-Id: I4510ee5893389f244f0fbaa1cd4a182868939b25
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
For iWARP devices, buffers that are intended to be the
target of an RDMA read initiated by the target must additionally
have IBV_ACCESS_REMOTE_WRITE permission. This is because iWARP's
RDMA read path essentially requests the remote side to do
an RDMA write.
This is unfortunate because there is no way to differentiate between
memory that the remote side can do an RDMA write to and memory
that will only be the target of RDMA reads initiated by the
target. There is nothing we can do about this serious deficiency in
the specification, however, so we have to live with it.
Change-Id: I3d2f2814ce0cb1df4e5347296ef371db4d16be21
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
I believe this is required for NICs to report, but handle
the case where it isn't reported.
Change-Id: I38d10c3590d1df8bb902ab312af0f9e01b9e5032
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This makes it consistent with the way connections and
requests work.
Change-Id: Ifb97499ba72f7dfd02ac54ba1b622726d266262c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The shared memory pool for a session is associated with
a particular RNIC via the protection domain. New connections
attempting to join a session that came in on a different RNIC
can't use that memory, so must be rejected.
Change-Id: Ibd79fe90566a231f76b7472e5e9b484c3e528454
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Rearrange the functions in rdma.c to match the order
of the function pointers in the transport. No other
code changes.
Change-Id: I9dbc68912ecd5dfdf53f20b4807d4116933a3c3a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Use the lower level registration functions. The RDMA-CM
examples use the ibv_* versions, so who knows if the
rdma_reg_* wrappers are even well tested.
Change-Id: I8e8250ab09a1401e636aebe2fc04a60806f7a827
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Previously, we mixed use free and spdk_nvmf_rdma_conn_destroy to
free allocated spdk_nvmf_rdma_conn structure, which sounds not
exactly free all the resources.
Change-Id: I2917b442c34d63ba5c014add58f429ae4b831595
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The RDMA API doesn't say whether the wr is copied, so be
safe and allocate it on the heap.
Change-Id: I091af50aa031e1861333f19d864eb52335d6b756
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This allows the entire transport structure definition
to become private.
Change-Id: I9ca19edbfc3cfb75b9b113a89bb2b90bc499ab16
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This changes as little code as possible while still creating
a single public API header. This enables future clean up
of the public API and clarification of the exposed
concepts.
Change-Id: I780e7a5a9afd27acf0276516bd71b896ad301c50
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Remove #includes for all DPDK headers that weren't
necessary.
Change-Id: Ib02522e0f04e64a1c98afceb7508cc0e8d931a9d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This converts some, but not all, usage of rte_mempool
to spdk_mempool. The remaining rte_mempools use features
we elected not to expose through spdk_mempool such as
constructors, so that will need to be revisited.
Change-Id: I6528809a864ab466b8d19431789bf0f976b648b6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Use the env library to perform all memory allocations
that previously called DPDK directly.
Change-Id: I6d33e85bde99796e0c85277d6d4880521c34f10d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
'virtual' is a keyword in C++, so avoid using it in variable
and structure names in case any files are eventually
included from a C++ project.
Change-Id: I2122750445def63038af68a3000758e33b937f9d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
All completion queues for the same listen address
now share a common completion queue channel.
Change-Id: I42c149fe7e221951e8a3826b1713482c37a265b8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
These 4 callbacks can be condensed into two callbacks, which
simplifies the API.
Change-Id: I069da00de34b252753cdc8961439e13a75d1cc68
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This allows users to swap out SPDK's third party
libraries for an implementation based on their own
framework.
Change-Id: Ia0b7384ce5e31acba5ad0d7002dec9e95b759c52
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The offset variable is used to store the result of a uint64_t * uint32_t
multiplication; a signed integer is not the correct type for the result.
Change-Id: If1fb22314ba7e3cec91808cc051678f809c9e58b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This feature should only be used if clients are coordinating
with one another.
Change-Id: I89a437441a7e3fbcc1e5f6efa1c8e970ade7c2ec
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
We already require the assert header from the C standard library,
so use that instead of RTE_VERIFY to further isolate DPDK
dependencies.
Change-Id: I4a718af858c88aff6080e33e6c3dd533c077b8f4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
bdev and copy modules no longer have check_io functions
now - all polling is done via pollers registered when
I/O channels are created.
Other default resources are also removed - for example,
a qpair is no longer allocated and assigned per bdev
exposed by the nvme driver - the qpairs are only allocated
via I/O channels. Similar principle also applies to the
aio driver.
ioat channels are no longer allocated and assigned to
lcores - they are dynamically allocated and assigned
to I/O channels when needed. If no ioat channel is
available for an I/O channel, the copy engine framework
will revert to using memcpy/memset instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I99435a75fe792a2b91ab08f25962dfd407d6402f
I/O channels are not actually used for I/O yet however.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaa3774ecacc7ec206c7c0c66e6b2f2d10c8fa785
Instead of polling for only 1 completion at at time,
poll for batches of 32.
Change-Id: I5ef99a270489e7b3d2a58cb765915f187775a93e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Purpose: To make the function definition style consistent
Change-Id: I7ade943881aa5076fdd419958e386ae3c3661da6
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
1 In our nvmf tgt implemention, we use the async
mode to delete the nvmf subsystem. However, when
we parse nvmf subsystem, we need to use the sync
function to delete the nvmf subsystem. Since if
there is error, we will call spdk_app_stop, thus
async functions will not be executed. It is
approved in my local test.
2 Add debug info in spdk_nvmf_delete_subsystem
Change-Id: Ia8ecd6eee1bbd25cb3e1ceeb0e2146f3f03be228
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
ibv_poll_cq is actually an expensive call to make, so take
steps to begin to minimize the number of times it is called.
Change-Id: I6fc64979604220eb8cacd612b46e3a3b1bca0924
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This matches the general order (LBA start then LBA count) for
the NVMe API.
While here, fix a copy/paste error in a debug message (write
instead of writev).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ice326af5d6025867dffed4d1f6c7b81fb9eba5eb
Set status code to invalid opcode when opcode is not supported
in nvmf_process_discovery_cmd.
Change-Id: Ibab8097e536f26f16c322d5f539277688906cfc3
Signed-off-by: Liang Yan <liang.z.yan@intel.com>
The spec does not define NQNs as case-insensitive, so replace the
strcasecmp() matching of NQNs with strcmp().
Change-Id: I5946d9ee8e1d0aa5966e9b1b3c6f14f3f5119aec
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
1 Rename this function and make it more meaninful, since
we have spdk_nvmf_session_connect which is used to link a
connection to the session
2 split spdk_nvmf_session_destruct.
Change-Id: I150df7ccdf4de3428d8cecbb286d5f7944510a8c
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Fix copy-and-paste errors - when polling the recv CQ, we should print
"Recv" instead of "Send" in log messages.
Signed-off-by: Roland Dreier <roland@purestorage.com>
This can just directly assign the completion instead
of calling memcpy.
Change-Id: I07819c824eba45245b00fa3538a99bc81bcb9fcc
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This function always shows up as one of the hottest functions when
profiling. I believe it is the memset that is expensive, so instead
use default initialization when the wr is declared on the stack
and just set the members that need to be updated in the function.
Also make the function inline for good measure.
Change-Id: I29e24cdd375311fa033b5a6df772ff4f73e35302
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
We need to free the session resource, if there is error
for creating a new session
Change-Id: I7c4f3e779e0b30e213e02b8676d93bd2fe9bf851
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The application is now entirely responsible for scheduling subsystem
pollers and sending events between threads.
Change-Id: I88da1f53b5e8852c7c4acd6f0a7a1e2219fbed41
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reason: In acceptor_poller_unregistered_event, we
directly call spdk_nvmf_check_pools and spdk_app_stop,
it will fail the memory check.
And function nvmf_delete_subsystem_poller_unreg will
not be called since we already call spdk_app_stop.
Change-Id: I3ffa30c87b149a66cee1d87d1bb81d4dc8cc96b9
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The "+" is not correct, should be "-". Currently,
the issue doest not happen since the offset is 0,
then both + and - is OK. But if we adjust the location
of spdk_nvmf_conn or spdk_nvmf_request, we can find
this bug.
Change-Id: Ib358dc729da901a69442d0402a6089989f49b05c
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Check that the number of blocks/ranges in the command fits within the
length specified by the SGL.
Change-Id: I21aded797dc1f1e752fe0bc9cec27310a4fb106a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The Dataset Management command allows several operations to be specified
at once; the virtual controller only supports deallocate for now, but it
should just ignore the other bits in order to be spec compliant: "If the
Dataset Management command is supported, all combinations of attributes
[...] may be set".
The spec also explicitly states that it is acceptable for controllers to
choose to take no action based on information provided, so not
implementing the other attributes is fine.
Change-Id: Ia989dc1faa9c852660bf1299ea18fa8e7bdf4053
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Also add a diagnostic message if the requested log page ID is not
supported.
Change-Id: I7551b5905d5ebc29356839f0f9153dc86f237106
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Rather than comparing the bdev name against "NVMe", use the new I/O type
supported API to query whether the unmap operation is supported.
Change-Id: I62c7a1ea5529366ff2ae4723b62f24ea78aa8193
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move the NQN validation into the subsytem creation function, and fix the
allowed size to match the spec.
The spec is not clear about the allowed NQN size; for now, interpret it
as 223 bytes, including the null terminator (222 bytes of actual NQN
plus one terminator byte).
Change-Id: If9743ab2fe009d9d852e8b03317d9b38d8af18dc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
SUBNQN is a UTF-8 null terminated string according to the NVMe base
spec, so pad it with zeroes using strncpy().
Change-Id: I486161b26d91f3ea1fd17428e220b9f20a874732
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
These are specified as "ASCII string", which means they should be
left-aligned and padded with spaces, according to the NVMe base
specification.
Change-Id: I25babe0ca417c2e16137b0bfc41fc7834277114e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Clean up the poller and only then free the associated subsystem's
memory. This prepares for future dynamic subsystem creation/deletion.
Change-Id: I9e56cbf8822814930fdbb662095c51b6ad40fbc4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Currently the NVMf target listens for new connections on any address.
Instead, listen only on the addresses specified by the user.
Change-Id: Idb6d37c422e442fc70a8673bd3fcfb9c27b57828
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Use the event framework's new delay parameter to allow
for idle cores to sleep for up to 1ms at a time.
Change-Id: I665f38e590c07338418892afe0e75b0b2c79706e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
It is no longer needed, since the nvmf_tgt app handles initialization
and shutdown.
Change-Id: I051afe2b4fcbd09b32998386c63f591a0ab343c2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This will be used in future patches outside the library.
Change-Id: I1fcf5709944a884e161e5a6a9eaec033a995a812
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The NVMe over Fabrics target library now exposes a simple function call
that polls the acceptor once, and the application handles registration
of the poller.
Also rename the transport function pointers related to the acceptor so
they better reflect their purpose.
Change-Id: I5fa0d516586bf17e73afeb88ff3c2d5b0d46794d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This will become more important when other transports are added.
For now, it is also useful to be able to start nvmf_tgt on systems
without RDMA hardware.
Change-Id: I6b9002cc7711f928c4e6b73adcd9b677349ebdd6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_shutdown_nvmf_subsystems() was removing the subsystem from the
list, but nvmf_delete_subsystem() also wants to remove it, so drop the
extra removal.
Also rewrite the shutdown loop as a TAILQ_FOREACH_SAFE() to make the
static analyzer happy (and make it more obvious that the loop will
terminate).
Change-Id: Iccadafa77d9cd3e26be21c0f11e62cfc1ef0197c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Verify that the record format is the one we support (only 0 is defined
by the spec for now).
Change-Id: Iddf038b381e540134abf572e0545c97a0ef71d5f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The spec requires that NQNs are null terminated and maximum of 223 bytes
long, despite the Connect command fields being larger (256 bytes), so
add checks for both subsystem NQN and host NQN before using them as null
terminated strings.
Change-Id: I343d9e44a09ab4d0f6654feba460b31e976c4e56
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Users can specify the core for each subsystem and the acceptor listen routine
to run on different cores for performance consideration.
Change-Id: I4bd1a96f39194c870863b4b778e6ea7cf8fc1a2d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
This is causing issues during shutdown because the poller removal is not
synchronized with the rest of the cleanup path.
This reverts commit 7dfc5e922d.
Change-Id: If95c4b72c5d120f18bdc3db6d7d532ad1aada642
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This should enhance performance, since the hardware admin queue poll
function takes a mutex and should not be in the performance path.
Change-Id: I7e4acde0337aaf7079811612cba5348acf0a467d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This leaves more flexibility for future changes to the poller
representation without requiring API changes (after this one).
It also prevents the user from accidentally using poller fields in a
non-thread-safe way, since they can't be accessed directly anymore.
Change-Id: I7677d5b93668665d29ae39c5e0ba74333ad3f878
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The NVMe submission queue head wraparound point can be determined in the
generic NVMe over Fabrics layer; it should not be using the RDMA
connection queue depth.
Change-Id: I9da8f09e4f057f8fdc1ff4c6cc5f48cea7123e11
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Report the maximum admin queue size correctly.
Change-Id: I52cad654bf59806e0abb8d869c22973647056617
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use the max_queue_depth parameter rather than rdma_conn->max_queue_depth
so that we can start to eliminate rdma_conn->max_queue_depth.
Change-Id: I1670c634e6d12aa004fb5a10338b7624850fbc4a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
There were two unchecked allocations in the nvmf library. Check
for allocation failures.
Change-Id: Ic6b3104d825dba1ee6bd1748fa99e132702f300c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This fixes a static analysis warning for unsigned/signed
mismatch.
Change-Id: I49bd8d6d195f13b402e14a85503a5de6114f5b7f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The large buffer pool allocation was using the per-connection queue
depth, whereas the RDMA memory region registration was using the global
RDMA max queue depth. These sizes need to match, so use the global RDMA
max queue depth for both calls.
Change-Id: Iae161b719e09e19ca3e81df6593b68a4a2e86614
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use the new timer-based poller functionality to replace rte_timer.
Change-Id: Ic40653306cc73b40139fe18e06bab29b35721a43
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Allow pollers to be scheduled to be run periodically every N
microseconds instead of every iteration of the reactor loop.
Change-Id: Iaea3e98965d81044e6dc5ce5f406bcb7a455289e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
We reported virtualized NVMe devices through NVMe over Fabric specification,
with 1.2.1 NVMe version. For direct mode, the NVMe device maybe has lower
version, such as 1.0, the identify namespace list can not support in those
devices, so we need to add helper function here to simulate such commands
from initiator.
Change-Id: I226f4f34bf61017f538d2dd80332f1d054a501f1
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Allow higher queue depths by allowing many more send/recv
operations than read/write.
Change-Id: I66c424a6463e5e09be6d5463667241ce9271404b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The target can only provide updates to sq_head inside
of completions. Therefore, we must update sq_head prior
to sending the completion or we'll incorrectly get into
queue full scenarios.
Change-Id: If2925d39570bbc247801219f352e690d33132a2d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This allows the target to poll for internal completions
at higher priority.
Change-Id: I895c33a594a7d7c0545aa3a8405a296be3c106fb
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This ensures that the data buffers are not in use
when we go to send the completion.
Change-Id: I30467b3e3964001150f81b21e5b695dcd0974b0c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This is useful for holding session-wide buffer pools.
Change-Id: I7024da24b210a2205bf1e159d5935e0093b81120
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
For small SGLs, even if they are keyed and not inline, use the
buffer we allocated for inline data.
Change-Id: I5051c43aabacb20a4247b2feaf2af801dba5f5a9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Read/Write depth is much lower than Send/Recv depth.
Calculate them separately to prepare for supporting
a larger number of receives than read/writes.
Currently, the target still only exposes a queue depth
equal to the read/write depth.
Change-Id: I08a7434d4ace8d696ae7e1eee241047004de7cc5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
These don't actually work quite yet, but pipe the
configuration file data through to where it will
be needed.
Change-Id: I95512d718d45b936fa85c03c0b80689ce3c866bc
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
For each connection, allocate a single buffer each
of requests, inline data buffers, commands, and
completions.
Change-Id: Ie235a3c0c37a3242831311fa595c8135813ae49e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This can be used to release requests that don't
require a completion to be sent.
Change-Id: I8fb932ea8569bf3c45342d9fa4e270af5510c60c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
PORT IDs indicate hardware failure domains according
to the NVMf specification, which means they should
indicate which transport addresses are on the same
NIC. Unfortunately, that doesn't really make sense for
IP-based fabrics because IP addresses can move. The
safest way to present this is to show all IP addresses
as part of different subsystem ports.
Change-Id: I056a50c69be70b4fbf1f896e684ce65bd792241e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The NVMe over Fabrics 1.0 spec corresponds to the NVMe base spec version
1.2.1, so we should pretend to be at least that new.
Change-Id: I36fc44c780de01d6c666e87b803cd47dba0e74c5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
These belong in nvme_spec.h anyway and are not used.
Change-Id: I889dfebee523dc5ae503fd0370bb800f1d17fb5d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is a leftover from a previous controller numbering scheme that is
no longer used.
Change-Id: I3058802f0324b0e38708111634ee993c6e884087
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move the ctrlr and io_qpair out of spdk_nvmf_subsystem, package them
as a new data structure. Union the direct and virtual mode namespaces.
Change-Id: I839aee3372c6c57aa03a0be76f8aaeb5045ecdaf
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
CAP.CQR indicates whether contiguous queues are required; this is
meaningless in NVMe over Fabrics, since queue creation is handled
implicitly for each connection, but the spec requires it to be set to 1.
Change-Id: I6b05954eefa6928beecd7a640bbbdbd835c6b69a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use the size of the applicable structs directly.
Change-Id: I4a65de548d409c9962b11a75d3fde2bfe434a3ec
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
nvmf_create_subsystem() already copies the name, so the strdup() in the
caller is unnecessary.
Change-Id: I225f0f077fee30051b197a4b1d7276b113ec6b01
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
It isn't actually necessary to drain the cq before
destroying it.
Change-Id: I6f77ae578176a14b5de935274a14cfd165229ec5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This logically belongs inside the session handling code, not
in the transport-specific layer.
Change-Id: I93b2271f38dbfc742162c98c40acb153c7e9022a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Track and print out the currently outstanding I/O in debug
mode with rdma tracing enabled.
Change-Id: I0a1f0cd6e22dbf21e18ca0ec7d0c2c6d194509e3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Instead of reimplementing handling for checking the
completion queue, nvmf_rdma_accept can now call
the general purpose poller.
Change-Id: Id2c899d1e500a8cb8491e51cc101a1bf0e167764
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
AER breaks our current model of requests/completion pairs.
Temporarily handle it by immediately re-posting the
capsule while we work on a real solution.
Change-Id: Ie7a4d88030b6fff5a11c4697eec0f024f9737f27
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Inline this code into the places that called it. These two
spots will be combined into a single path in a later patch.
Change-Id: Ice2f009ad56b783dc28ebbf1abbb877ce6000293
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This is an RDMA-specific operation, so hide it inside
the transport-specific layer.
Change-Id: Iaa097e8dde78d820547b3a39e9717c992581340b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
These can be done at the same time now that the queue depth
is known ahead of time.
Change-Id: I7ecef30ebb4311e0a1c88f37461d34534f8600bf
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Calculate queue depth into a local variable without
touching the rdma_conn.
Change-Id: Ie804ed39ddecbf59015a4e4f7aa127f1381d9080
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Make sure the trace history that is exported via shared memory is always
the same size, regardless of DPDK configuration.
Also removes the necessity of including DPDK headers from spdk/trace.h
(so we have to fix up other files to include what they use).
Change-Id: I32f88921fd95c64a9d1f4ba768ae75e2ca5d91da
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
It is not currently configurable, but this will allow us to make the
discovery subsystem have config options (e.g. which lcore to run on).
Change-Id: I788a64ba4462b023453191e509ce8de59fd90ae4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is a much simpler approach and is only slightly
less efficient.
Change-Id: I909de376d576a74156c1be447e90e7dbc240f025
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Drop the redundant controller ready check.
nvmf_process_io_cmd() was checking CSTS.RDY, but this is not necessary,
since its only caller, spdk_nvmf_request_exec(), is already checking
CC.EN, which always matches RDY in our virtual controller
implementation.
The initialization of status is a dead store -
nvmf_complete_cmd() always writes the full response, and the only other
branch is the return immediately below the call, which also sets status.
Change-Id: I1ec2b8a225a91c4b2997d8ab4f45d050cc216de3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
No reason to use DPDK in this file just for an equivalent to assert().
Change-Id: Ic6932a16d0a36cd1a3cb25c8cc5e295c59f3e2db
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Temporarily set the in-capsule data size to the maximum data transfer
length. This should actually be updated by the transport layer, but for
now, the only transport (RDMA) supports the full bounce buffer size.
Also drop the check that prevents admin connections from using
in-capsule data; the host may send in-capsule data for the Connect on an
I/O queue, and we don't know the type of connection until after Connect
is processed.
Fixes: 828dca7 ("nvmf: Move some stray session init code to the right place")
Change-Id: I369ee5497247d7e875ad0b6f0aaf6c47c1d3887c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make sure no response fields are left over from the previous command in
the spdk_nvmf_request.
Change-Id: I42937e991d9dd6550fd4bc9b6d0dd66b44c6b83e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_nvmf_request_complete() always sets CID to the value in the
command, so there is no need to set it in the command execution
functions.
Change-Id: Ibbe745b862e27fff7c55e553758ef093e3ef7f6d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use the passthrough command for all Identify commands except Identify
Controller.
Also only check the CNS field of CDW10 and use the new enumerated names
instead of magic numbers.
Change-Id: Ia94f820ac85a2d6b2d0ae02659e73c53f1b1a4cd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
If we connected a subsystem twice from the initiator, the second
connection will be rejected by the NVMf target, however, the previous
connection will also be impacted because we destroy the connection id
before ack the disconnect event.
Change-Id: Ib597cc68a7823524460693053898f4d6e5499eb4
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
There is no need to handle Read and Write commands separately; the
generic raw I/O command case can handle them just as well.
Change-Id: I8475eed0a20bd809c447ed2ccac0b99f6c2a9b4d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Replace use of the newly-deprecated rte_mempool_count() with the new
name, rte_mempool_avail_count().
Also add a compatibility wrapper so that builds against older DPDK
versions still work.
Change-Id: If3c44bdef4bbcf7a456a1dfa272348ccc6f35261
Reported-by: Jay Sternberg <jay.e.sternberg@intel.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The host is not allowed to send normal admin or I/O commands until the
controller is enabled (via the Fabric Property Set command).
Change-Id: Ib62be3a3792fc0b36bace28b4c9afdf78dad3bcd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Only allow Connect on a new connection (one that has no associated
session yet), and only allow Propert Set/Get on admin queues.
Change-Id: Iae22379ee47b095333372e6d151a7a1509acf654
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The NVMe spec requires that the I/O queue entry size values in CC are
set before any I/O queues may be created.
Change-Id: I4f0c9a9c20411223d281993745c85a8431197961
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Track each individual bit in the Set Property handler for CC, and fail
the request if any unhandled bits are modified.
Also add handlers for IOSQES and IOCQES (I/O submission and completion
queue entry size).
Change-Id: I374dc3c15197e029ba07fd9ee1cff0e38a0a884d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
It is not implemented yet, but add a message to remind us to write it
later.
Change-Id: Ic1c35a0d35f728bc63b38c334d9c622493bee967
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Property Set of CC.SHN is not supposed to terminate the session - remove
the commented-out code that was attempting to do this.
Change-Id: I1db230df9be549764287a8fd45ccdebea1d22a8b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Set CSTS.SHST = 10b to indicate that shutdown is complete, and
CSTS.RDY = 0 to match the state of CC.EN.
Change-Id: Ia651c34427526a38f22cba3910df2cf7d4bedd92
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Explicitly include spdk.common.mk at the top of all lib Makefiles so
that CONFIG options and other predefined variables are set.
Change-Id: I1e560c294fe8242602e45191a280f4295533ae44
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
There is no need to allocate ibv_sge structures within the RDMA request;
we can just fill them out on the stack right before submitting each
request.
Change-Id: I438ff0be2f6d07ffa933255c92c4ec964aa1b235
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Just return success or failure - the actual count was not used.
Change-Id: I26e7c4c6319af444d221d9b0f313fb7071733619
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
All of the WC events that we handle map back to a request, so look it up
before checking the opcode.
Change-Id: I1b70a773374f64387df0a21a4f7fd64b26534b14
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make sure all tracelogs in rdma.c use SPDK_TRACE_RDMA.
Change-Id: Idc3d3b6654215b5ab3ee84a106e46ffd3019cc7a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
These NVMf spec structure definitions are the same as the equivalent
NVMe structs.
Change-Id: I21c45973b7843e3767c48f97ec42e7b446df296f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
There was only one function and a structure declaration
left.
Change-Id: I63277b4182120e7a76a925ed0bf7378ec7c23f20
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
These can be simplified and merged into the subsystem.
Remove the concept of mappings from subsystems and replace
it with a list of hosts and ports. The host is optional -
not specifying a host means any host can connect.
Change-Id: Ib3786acb40a34b7e10935af55f4b6756d40cc906
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Make the transport responsible for filling out the fabric-specific
details in the discovery log entry.
Change-Id: I41d871c605becd557dca18f8ef7e80da66950257
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make the core NVMf to transport interface generic and allow for multiple
transport types to be registered.
Change-Id: I0a2767a47d55999c45f788ae1318bb50af60ab4e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change the Port configuration file entries to a new format:
[Port1]
Listen <transport> <address>:<service>
Initially, this still only supports RDMA, but the new format will allow
specifying other transports once they are added.
Change-Id: Iadfd19b91db57b571064379368dbe77204ccecbb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Each subsystem will run on a single core, which is more than enough
to fully saturate a device and a NIC. For now, all subsystems
run on the master lcore.
Change-Id: I95340a262d70fd346fa81fe519e7d4190a369e64
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Instead of starting the connection poller immediately upon
the connect event, wait for the first connect capsule to
start the poller.
This builds toward associating all connections with the same
session with the same lcore.
Change-Id: I7f08b2dd34585d093ad36a4ebca63c5f782dcf14
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
It can be different per fabric interface within a single port.
Change-Id: If13590d7f12291499ccfd705efaf6d2b1b1d7003
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The type is already stored in the fabric_intf.
Change-Id: Icd33dd29f2fa1313329b4053892693c7ff90945d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
For now, it just contains RDMA, plus a raw byte array to allow generic
copying.
Change-Id: I02fe11f99dd8b49000de0dba991cd34c99fd7a4a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Pull out the duplicated min checks against the ibdev_attr values.
Change-Id: I774c355ba669486afde5c05c55a4ed653723db98
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Set a status code in the response capsule for each possible error case.
Also enforce CC.EN == 1 before I/O connect.
The NVMf spec requires that the controller is enabled before any I/O
queue Connect commands are allowed.
Change-Id: If56d6b4d6bedad00e9e845e77f05f715e3969f8b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Drop the debug print in conn.c that was the only user.
We still have the connect data structure when determining the connection
type, and after that point, the queue ID is not needed.
Change-Id: Ida9e170099f977ec6b84478874863c40d6f7d8a1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The NVMf target is being refactored to split the RDMA transport-specific
code into its own file. Once this is complete, we should be able to
plug in other transports and build the NVMf target without any RDMA
dependency if desired.
To enable this, change the CONFIG option to RDMA; it still controls
whether the whole NVMf target is built for now, but once the RDMA
dependency is actually made optional, we will be able to build the
generic NVMf target code without libibverbs installed.
Change-Id: I8cd90a9aaa85dcefcc9b0f8f2e7b6af21958b2a8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move the configuration file parsing for subsystems
into the configuration file parsing file.
Change-Id: Ie16e73cdc65fae7f2f3c3b22f9cba7f167024fa1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The code for parsing the configuration file still
referred to a host as an init_grp, so fix it.
Change-Id: Ifa250b09de495dd7d393ccc3557fd6d56a54e790
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This never really made sense, so replace it with a list of
subsystems.
Change-Id: Ie7a9400083c091ac7142d01c23948200f515bdf7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This is just extra complication for no real benefit.
Change-Id: I528af98e799d0641e753390fe35ff561fa3d7d76
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Use the number of devices returned by ibv_get_device_list() instead of
stopping at 4.
While we're here, drop the unused MAX_SESSIONS_PER_DEVICE definition
too.
Change-Id: I21ca6c6c95b7f2cccc1de4d0a34b95217a522bfc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is the only file that calls it, so it can be static.
Change-Id: I47573b7b38b40ad37e758234245eedbe94ae0a12
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
These were internal-only APIs; initialize just checks to see that the
pool was initialized (which is already checked internally), and shutdown
just called spdk_nvmf_shutdown_nvme(), which we can call directly.
Change-Id: I95e1b912d61a38fa9934f58df7b1512678303452
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
These can be isolated in rdma.c rather than being part of the generic
transport API.
Change-Id: Idc2b969a2f7685420cda2f7c4aa12495ffc3fcbc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Just calculate the required number of requests once and store it in a
global variable.
Change-Id: Iffeb637a3ac5f69ec89989b84f03699bac483b6e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
There can be only one session per subsystem.
Change-Id: I8ba85a5ebd11dd71fda2a4bafa97a0935609379f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
It is just a duplicate of the NVMe library request_mempool.
Change-Id: I2a5484e5d515b965503b2cfcd8d85ccfcb0dee05
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Clean up everything that isn't strictly necessary in rdma.h.
Change-Id: Ied9acbed5f5b64860eae39816cdcb74620009a79
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This essentially turns the current nesting (of RDMA conn inside NVMf
conn) inside out. Now the transport owns the connection structure and
allocates it when necessary.
Change-Id: Ib5ca84e2a57b16741d84943a5b858e9c3297d44b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This sets up the RDMA layer to be able to embed the NVMf conn inside the
RDMA conn.
Change-Id: I5e3714ac8503826504d78d06fb5eaafabd025bb8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The whole cleanup process is now started by
spdk_shutdown_nvmf_subsystems(). Each subsystem will clean up its
session, if any, and each session will clean up its connections.
Change-Id: I9915d4547751ed4ffc4baa2c45c628698dd0b881
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The per-lcore connection counter was incremented and decremented, but it
is no longer actually read. The lcore allocation should happen at the
session level instead.
Change-Id: I7bdf1b521bfda4892304338d43fad3ed5123c494
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Nothing actually maps the shared memory region, so there is no need to
allocate the array of connections that way.
Change-Id: I3d5eca748f892e37fbb0ec52942f1c510e9f9dc8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
There is only one controller per subsystem, so therefore
there can be 0 or 1 sessions. Change the list of sessions
to a pointer that can be NULL if no session exists.
Change-Id: I2c0d042d9cecacae93da3e806093faf0155ddd6e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Subsystems only have one controller, so cntlid
is always 0.
Change-Id: I690a1793ad3a696adbaefca856e559dd0177b11a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This was intended to track the number of NVMe device
queues per session, but there is only one hardware
queue per session. It was conflated with the number
of RDMA queues in several places as well.
Change-Id: I74a1c56a5d395dea8bee4778882821e904cebcf9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Everything can be done when the session is created.
Change-Id: I7cb38c093b2b1b69460cabba465828eed0cec432
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The cntlid is inside the session, so no need for
duplicate data.
Change-Id: I5669ee6393807959506dfec36a7583af77386fc4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Since we only allocate workers to the master lcore,
remove the logic that places I/O conns on the same
lcore as the admin conn.
The "right" logic would be to place the I/O conn
on the same lcore as the whole session, and this
patch builds toward that.
Change-Id: I8983b56de41062ec834b0a169ba0fa61326c466d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Temporarily, only run on the master lcore. This makes
some temporary refactoring possible that is required
to move to a truly scalable threading model.
Change-Id: I13a2e03107a27f8ec18b023b15f653d374a137b5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
A connection function was initializing some session data, so
move that code to the function that initializes the session.
Change-Id: I5f2d4349585cb97985a7bbd9fb8d6c66eeaa7d4e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
There was an extra layer of indirection complicating
things for no reason. This removes it.
Change-Id: I8d4e654eb17f8f6ec028d775329794f0745fb0f7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The NVMf target set the maximum data transfer size(MDTS) to the default value
of 128KB now, and the initiator driver will read the value and set it to the
block layer, so each command sent from initiator will not runoff 128KB.
Change-Id: I1d4f259e887b2fc70c7f1c5406c07c58f7fc9b8d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
If any completion indicates an error, we need to close the connection.
Change-Id: I50b30aa692ae121932f1baec32f713422ff415ed
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
NVMf does not have the concept of subsystem groups; the (former)
subsystem_grp files really contain structures and functions related to
individual subsystems.
Change-Id: I4b3a64de799fffb29f8685ea4908d754516815cd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Create a list of valid properties with get and set callbacks (set is
optional to allow read-only fields).
Remove handling for fields declared as "reserved" in the NVMe over
Fabrics 1.0 specification.
Also simplify the vcprop structure to only contain the required fields.
Change-Id: I14d3ddfd008c62b75fce8e64d193c87fb6f7b5ad
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Multiple NVMe controllers within a subsystem does not work correctly,
since we would need to virtualize the controller data, namespace IDs,
and so on. For now, only allow pass-through mapping of a single NVMe
controller per subsystem.
Change-Id: Ib2d3576d2856c46a086f38eb6bec56f3e7a73575
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Previously, we used cap_lo and cap_hi to represent the 32-bit halves of
the full CAP register. However, it is simpler to keep them in a single
64-bit structure, and is no less efficient on 64-bit platforms.
Also name the NSSRS field from NVMe 1.2, which was previously reserved.
Change-Id: I1d5d9b0dccbb12373b4aed3db29c883881d43223
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The bb_sgl must follow recv_sgl make the logic obscure.
Change-Id: I8d47477986efd8f2d4ed964ab9373b7f157af274
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Admin commands technically don't allow inline data,
but there is nothing from preventing us from posting
a recv buffer that could handle inline data. It just
won't be used for incoming admin capsules.
Change-Id: I3e7e4406e01ab870654a166d52221c11fc0ac683
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
We need to bind to each port declared in the config file; there is not a
single global port number.
Change-Id: I41c315588078d131c32cb145d22314047505c95c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The access to the NVMf IOCCSZ (I/O Queue Command Capsule Supported Size)
field in the Identify Controller data was incorrect.
Change-Id: I23b0aa175de8e5d8a0220e9c35e0cb6868121cb5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The maximum in-capsule data size is determined by the I/O queue bounce
buffer size, and there is no point in limiting it beyond that, so remove
the need to configure it.
Change-Id: I64806516b847e819f57ac9f62a162f7a04805b57
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
4420 is the officially assigned IP port from IANA for NVMe over Fabrics.
Change-Id: I433a5ed0780d1ffd7ca6512617759d59fa5e8def
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The queue type and queue depth are not known until
the connect capsule is processed. Delay allocating more
than 1 recv wqe until then.
Change-Id: I0e68c24bc3d6f37043946de6c2cbcb3198cd5d1b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Currently, the recv wqe is re-posted immediately. This
closes a small window where we could get more I/O
than we could handle.
Change-Id: I9b0b1f0cc526069033b9e04f170195c4fb130e37
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This is going to be used elsehwere in teh code, so
name it according to the public namign convention
and make it public.
Change-Id: Id5fd57e78e146f3235741a251bb30244d6530f2c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This is going to be used elsewhere in the code, so
name it according to the public naming convention
and make it public.
Change-Id: I0dcb88e902c5e609fe6acd06ad06743203fcaa60
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Break out the code to allocate a single rdma request
to be used elsewhere.
Change-Id: I687ce5ec862831fed5300157bfb4bf980d22c782
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
When Debug is not defined, SPDK_TRACELOG will do nothing,
thus cmd_type is an unused variable, and will trigger the
compilation warnings. And this patch will solve this issue
Change-Id: I821f7601a16c98e514227aee2e18fbfa61928bea
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The queue depth allowed for incoming commands is set
such that we can do the maximum number of RDMA reads
necessary. There is never a case where a READ will need
to be queued anymore.
Change-Id: I4f7e7f4a59f6358065b82f36a5e22744af210d07
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
There were 4 variables tracking queue depths. In reality,
only one is needed once the minimum is computed correctly.
Change-Id: I9bb890e92a33a3c7bd6e27cbd31d6bee7ca0cf3d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
NVMe over Fabrics defines its own NVMe Qualified Name (NQN) format; it
does not use iSCSI Qualified Names.
Also change the default node base for nvmf_tgt to "nqn.2016-06.io.spdk".
Change-Id: I2b73c1426ef1d8c83cc2df499d79228ea61257cd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Fix the sizes of the UUID fields to match RFC 4122.
Change-Id: I1458a22579f455cde0a67ee3ce616e78d5c810c2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This will allow removal notifications to be propagated to the library
user (e.g. for hotplug).
The callback is currently unused, but this at least prepares the API for
the future hotplug support.
Based on a patch by Dave Jiang <dave.jiang@intel.com>
Change-Id: I20b1c2dbf5e084e0b45a7e51205aba4514ee9a95
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The function call of spdk_nvmf_check_pools can be
directly put in nvmf.c.
Reason: This pool is created by nvmf subsystem,
it should be recycled by this subsystem.
Change-Id: I49e49bcb56079fc25d26b1f5078a1808c2f8e189
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Drop the RDMA-specific fields from spdk_nvmf_request and get them
directly from the command SGL in the transport-specific read function.
Change-Id: Icd06a9018a8c341213fbc8d26d3d7cbf2fb32d30
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The connection will be closed in these cases anyway, so just let the
normal connection cleanup deal with the active tx_desc.
Change-Id: I96c68d5802e189bb82b180cc3c7d7c3f4135be1f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
If the transport poll routine fails, we need to close the connection.
Change-Id: Ie534b0f05e6642c31e0450865e309a784abbe744
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
If spdk_nvmf_request_exec() fails, the connection will be closed anyway,
so just leave the tx_desc in the active array; it will be cleaned up in
the normal connection cleanup path.
Change-Id: Ie4f60bd6001658403dd7e1c6a47d40be756ef6f2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
If an invalid SGL is specified, send a response with a status code
indicating what the error was rather than silently dropping the command.
Change-Id: I12d1fd847d3bc0ea8de7698e934626c2586a7452
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make all command processing functions return a bool to indicate
asynchronous (false) or synchronous (true) completion.
Change-Id: I7c2e4d28fa473b36ff26c902e4bb69f38b64d18d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Only use SPDK_TRACE_RDMA within the RDMA transport code.
Change-Id: Ie15fd24bb142a68f3661929267ebe396b556c351
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The error case could only be reached with tx_desc != NULL in one case,
so move the cleanup code there and drop the goto.
Change-Id: I7aace6b40dd75ef8d86fb173f9d58110e929b082
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Also split the generic nvmf_trace_command() function out of
the RDMA-specific handler and move it to request.c
Change-Id: If29b89db33c5e080c9816977ae5b18b90884e775
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Also finish up the req_state -> req conversion.
Change-Id: I131dd52dcd36a790b942e06f0207a3274cc04ffc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The overflow condition can't happen unless there is a programming error
in the nvmf_tgt library; we can only possibly receive command capsules
(sq entries from the point of view of the host) if we have posted a RDMA
Recv for the command capsule memory region.
This means that we also don't need to track sq_tail in the NVMf library.
Change-Id: I101509080c744528871e72fa46d188e2850c928a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The "immediate completion" cases in spdk_nvmf_request_exec() already
call spdk_nvmf_request_complete(), so the ret == 1 case in nvmf_recv()
is bogus.
Also fix a couple of spdk_nvmf_request_complete() calls in
nvmf_process_admin_cmd() that should be handled by its caller.
Change-Id: I41b865d5e6e7fec08087faf9c6f3da3b057a5fb2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
These are not supported (and did not actually function) in NVMe over
Fabrics. Queue creation is handled automatically when new connections
are initiated.
Change-Id: If3a10e5df2f0625537b2c453cd8c835e570fa31e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move toward making request.c transport agnostic.
Change-Id: I25fbe74fff21a5c23138e1a6e2d40bc6a4a984ec
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make nvmf_post_rdma_read() interface generic (don't require a tx_desc).
Change-Id: I331a93eed4bb1912a47a88bb904cf392fcc364c6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This fixes an oversight that allowed in-capsule data block SGLs to
potentially refer to more than the received in-capsule data size.
It also makes spdk_nvmf_request_prep_data() less dependent on the
RDMA-specific rx_desc/tx_desc structures.
Change-Id: I34d61aca4cf5ba033849673116d16ec90488dcd4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
It is the same as spdk_nvme_cpl, aside from reserved fields.
Change-Id: I62b0718dd58c998b4d26a0d1b44ee16d37eff25d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The RDMA read and write commands can determine the desired length based
on the nvmf_request length field.
Change-Id: I97b63289556e7de3c19c5a17ecbacbbbdfc10425
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Replace the generic "msg_buf" naming with command and response.
Change-Id: I19baff43b41a5eb7db9be9d7feec33d17112e320
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The mempool functionality is never used at runtime - all bounce buffers
were immediately assigned to a rx_desc.
Change-Id: Ie2195059858e34b30b07e104739f046c13abc335
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The RDMA tx_desc and rx_desc pools were only used at startup; all
descriptors are immediately allocated and put into a queue, and the
mempool functionality was never used at runtime.
Change-Id: I2882274962550191a555c8483b8f7be2854b32ec
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is an implementation detail of the RDMA layer.
Change-Id: Ib97d6fbd593789eed0b6e746972b8882a3320995
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This code is operating on a list owned by the RDMA
connection, so move it to rdma.c
Change-Id: I8b81f9d1ffc1df489c9b698969725ed0d1db6a06
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
These are an implementation detail of RDMA, so move
them into the RDMA portion of the connection.
Change-Id: I68d146019c5d78fbf5e9968abfd7baed2a54a2ed
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Separate out the RDMA connection from the
NVMf connection. For now, the RDMA connection
is just embedded in the NVMf connection, but
eventually they will have different lifetimes.
Change-Id: I9407d94891e22090bff90b8415d88a4ac8c3e95e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This structure will be expanded in future patches.
Change-Id: Ibb04917134243560e09a2a255844739eb33fab65
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The request needs to know which connection specifically
it is associated with.
Change-Id: I492b9968b4d2e307b5af44edee0778478b32d2ba
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
They each only had 1 function left that belonged
in the session.c file.
Change-Id: I405902b02e9316d2dc02d3732d8bc085c2b84d31
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Only move nvmf_request definitions from nvmf_internal.h
for now. Subsequent patches will move more.
Change-Id: If47472542515fd050cc78d95540eb25beee59d2a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Fabric commands were skipping a step, so unify all
types of requests through the same completion path.
Change-Id: I5f38a7e1cdcdf33baf71486d5ddae9f5a6157fac
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The nvmf_request structure holds the pair of pointers
for rx_desc and tx_desc.
Change-Id: I3e735979bbdcdc0e70ad78762e289849d41158ba
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This moves some definitions from nvmf_spec.h to
nvme_spec.h based on the latest publication.
Change-Id: I51b0abd16f7d034696239894aea5089f8ac70c40
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The nvmf_request object is generic and is mapped 1:1 with rx_desc.
Change-Id: I397224a3859c3c93d6eca99f7ba7c53ce7963f57
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Instead of searching the global list of connections to find a matching
cm_id, we can just store the pointer back to the spdk_nvmf_conn in the
rdma_cm_id context field.
Change-Id: I39ea16be6a633a1136d65743747b63b600f20e63
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
All of the variables are private to conn.c, so they don't need global
visibility.
Change-Id: I7c24cfc6249a9f8164b162b4b8de0e24c452e0df
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
It is always set to nvmf_process_async_completion and is only used
within the library.
Also rename nvmf_process_async_completion to spdk_nvmf_request_complete
to clarify its purpose.
Change-Id: Ie737fb60688329bfe329a8553c4a40ff2e5f8f1d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Create spdk_nvmf_request_prep_data(), which handles SGL processing and
data transfer for all command types, and spdk_nvmf_request_exec(), which
executes a command after data transfer has completed.
Change-Id: I51c2196260dd0686db8acca4d8f7c93e17618c2f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The pending type can be determined based on the command opcode.
This also moves the "issue pending RDMA reads" case out of the I/O queue
handling into the generic continuation code; this should not make any
difference for the current case, since the Fabrics Connect command is
the only other continuation case currently, and there cannot be any
pending RDMA reads in that case.
Change-Id: Idddfa496b6e5b7e6da772aa3ab1b9d1a5344771f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
nvmf_connect_continue() no longer needs the RDMA-specific tx_desc.
Change-Id: I95f6938063e9853aa7dcd419f488b91422ff9b60
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Let the calling function handle the tx_desc if nvmf_connect_continue()
fails.
Change-Id: I25a8cbc4c3be0608bcec8db2fb8c50e55fbe3e8c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Everything necessary for processing an admin command is now stored in
nvmf_request.
Change-Id: I74e75a5b7bb3b406ad167c2b31cab1af7a1f270a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Everything necessary for processing an I/O is now stored in
nvmf_request.
Change-Id: I3f390707ebe83ea66a116dcfda4d0388a6823629
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Keep a pointer to the local bounce buffer in the transport-agnostic
struct nvmf_request rather than groveling in tx_desc/rx_desc to get it.
Change-Id: Ic328d8e2b3a15759ccb149a89fb3562e928ca500
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Now that we have xfer to track data direction, the length field can be
populated correctly for all transfers (including in-capsule data).
Change-Id: I7b2228f3fac80aab983a4103ba095c7bc38e0b21
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This field is used to decide whether data needs to be transferred back
to the host after a command is completed.
Previously, this was determined using the length field, and length was
cleared to 0 after a transfer was completed. However, length will be
used in future patches after a host to controller transfer completes, so
we need some other way to tell what kind of data transfer is required.
Change-Id: I6b27cf7816908394735fc95c15bd5eb40a7c0157
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Since we used u64 to mask CPU cores, the available number of CPU
is 64, for default RTE_MAX_LCORE in DPDK, the value is 128, in some
cases(e.g.: when nr_io_queues > 4) we can get the wrong lcore ID.
Change-Id: Icc334b1bf5b068a310839118be341e61071cff65
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
A transfer using less than the total bounce buffer size is a normal
occurrence and not worthy of a tracelog. Also drop the pointless
conditional.
Change-Id: Ibcdcf693fea439d5034fa51b08b3fbd8fd7df8f2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Avoid using the RDMA-specific tx_desc when the transport-agnostic
nvmf_request will suffice.
Change-Id: Id35bbdfb353cb72e0feb4f5af19e5bd5c86d3ff4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Should set tx_desc=NULL here. If not,When
nvmf_post_rdma_recv(conn, rx_desc) fails,
we would make tx_desc deactive again, and
this is wrong.
Change-Id: Ieabc7e3864b7f124b003d052f66ab8799a1d632e
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
If we just pass NULL to rdma_create_qp, it will do
the right thing.
Change-Id: I9621a5110ace6237a1e47c6e5defb4cac3afc4ae
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The wrappers are much simpler to use than the low
level ib verbs calls.
Change-Id: I4b09a96a60020bc27df9396d40d955733f618837
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
They are only ever called in sequence and do related
operations.
Change-Id: I825abe08deba1dafb405757bb4f2d52062a801ca
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This enables SPDK_NVMF_BUILD_ETC to be moved out of the library as well,
since only authfile was using it before
Change-Id: I10d1145881f9a0358d7effe2d2d9851899413e1b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
SPDK_NVMF_BUILD_ETC will be cleaned up in another commit; it is
currently used both in the lib and in nvmf_tgt.
Change-Id: Ibc5f15cc4341f9d52b29c84defcd332bec4a4d09
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Most of the #include statements in nvmf.h aren't part of the public API.
Change-Id: I0d43dd542a28744a91a4fd0c4c806a991d1e194e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
It is not part of the NVMf library's public API.
Change-Id: I665d5713343c9185cbdadaef4fedfdc83b8232d6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
There is only a single global g_nvmf_tgt that can be passed to this
function, so remove the parameter and use the global directly.
Change-Id: Ia1a2a1e6cd3801101ddeb4de5526dd115fa7ef8f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The section is really defining a subsystem as defined
by the NVMf specification. There does not appear to be
any need for a group of subsystems.
This change only updates the configuration file. It does
not remove all references to a subsystem group from
the code.
Change-Id: I38e62735a5ac924dcafacb3c9a332a103d751d4a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The specification refers to this concept as a Host,
so use that term. This only changes the configuration
file usage. Initiator groups are still referenced in
the code and will be removed later.
Change-Id: I897f4dbdfb65d94da1e5a77434fc07a2c18bcdc2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The index should be 0 for fabricintf.
Moreover, when there is no fabricintf found, error should
be returned
Change-Id: I3aa04566a5a318b8c921dd37c8573ed075254266
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
There is no logical split between nvmf.c and framework.c, so combine
them and drop nvmf.c.
Change-Id: I91230c01ed7f171bfed04456b0bfcf0e7ddbc263
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The mutex is initialized, but otherwise is unused.
Change-Id: Ia68adbd430fad391cc465c07dd6e937e90dd2c5c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The code that actually removed items from the list was removed in
addition to the free() call, which caused a hang on shutdown.
Change-Id: If0e843d0d0ebfa28638b12104da880e70b3e548a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
