Add spdk_dif_verify_stream to verify DIF by stream fashion.
spdk_dif_verify_stream utilizes the updated _dif_verify_split.
spdk_dif_verify_stream is very similar with spdk_dif_generate_stream().
UT code demonstrates how it is realized.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1c5d197cf4c0bbc82c8e7f4fa45ddc0b94051058
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458330
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For NVMe/TCP target, data segments which correspond to H2C or C2H PDU
will have any alignment, and _dif_verify_split will have to process
partial data block, particularly the following types:
- start and end are both within a data block.
- start is within a data block, and end is at the end of a block
On the other hand, _dif_verify_split had assumed that passed block
is always a complete block.
According to the refactoring done in the last patch, this patch
exposes offset_in_block, data_len, and guard as parameters of
_dif_verify_split() and make _dif_verify_split() process the
above two types of data block properly.
The next patch will utilize the updated _dif_verify_split to
add spdk_dif_verify_stream().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic371d3ccefbd5fe8147a948a624013be2702128e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458329
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
As have updated the NVMe reset case, the check_io() must be executed
after ctrlr reset. It's easier to reproduce #819, so we can set a
short time.
Change-Id: I9ba867a6c2aa1a3921bace2e77acd28a069d9016
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457761
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Address translation wasn't correct for >32 bit length packed address.
This commit fixes the issue and adds a corresponding unit test.
This patch fixes issue #774:
https://github.com/spdk/spdk/issues/774
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: Idce67c47f2a9888f9e2ae2eadaf71ccc34e5c260
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457114
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Updated doc to include section on how to compile SPDK with link
time optimization (lto) gcc flag prior to running the benchmark.
Signed-off-by: John Kariuki <John.K.Kariuki@intel.com>
Change-Id: I1af4033144dd9f7594bcf40621acb7fb52018e7a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459330
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Scanbuild error on fedora30 reports:
warning: Array access (via field 'write_buf') results in a null pointer dereference
if (context->write_buf[i]) {
In deallocated_value.c, cleanup function be used at many places to deal with failed
cases even context->write_buf is NULL, so add context->write_buf pointer check before
array data. I think context->read_buf is the same.
This is related to issue #822.
Change-Id: I33c685fd732da820c1dfc861eb991b92b41caa29
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458736
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Missing dependency libudev-devel. If not installed then
./cofnigure fails with:
checking for libudev.h... no
configure: error:
udev headers required
Change-Id: I53c8f522cbc8eb1e6b461fd78c0bf3305bfb09b9
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459323
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently we are missing cleanup routine for case when
power failure interrupts creating snapshot. This patch
add such routine.
For the case where we find blob with a parent snapshot ID
matching newly created snapshot we can finish whole process
during recovery by processing forward with setting snpashot
as read only, removing xattr and syncing. We should remove
snapshot only if there is no blob with parent pointing at
snapshot.
Fixes github issue #760
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I2f0e298164e07a2b4dfa5367e8878facef640702
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455216
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is unit test for power failure event during snapshot
deletion. At the same time this is an example how to
use new power failure event functionality in unit tests.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I9212392f665576fa16edd28c609199d0e02dc434
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454608
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Both clean and dirty shutdown tests were expanded to perform additional
writes after restore, to make sure write pointers have been correctly
re-initialised and don't cause data corruption.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I662cf196319a39fb1cab455f5a76571904c20215
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457618
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Add test which causes dirty shutdown of ftl and attempts to restore
it. Without persistent cache it expects partial recovery of data
and zeroed out blocks in found open bands.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I316cbbb47d0d03b2c20247df43ba789f2fd018db
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456470
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This patch makes spdk_dif_set_md_interleave_iovs() and
spdk_dif_generate_stream() process unaligned start of data segment
properly by using ctx->data_offset.
Separating this patch into two may be required but this patch is
small and aggregating into a patch is good to test.
UT code demonstrates how it is realized.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idb5250aba4e12a34102e5ce067d725c685681177
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458142
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
VMD section with Enable flag set to true
need to be defined in config file to
enumerate devices behind VMD.
Change-Id: Ib9454b1596dc9e0e35dae695f20d6e40dd2c1ab0
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458444
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Make it easier to reproduce issue #819 without setting long time.
To decrease the UT time.
Change-Id: I3dd0268a894113e1a12395618721afee6137588d
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457914
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Our test destination code of spdk is rsynced from host.
former link address of spdk "https://review.gerrithub.io/spdk/spdk"
is not very fast and always failed .
So changed to "https://github.com/spdk/spdk.git" ,this spdk just for
excuting start testing command.
Change-Id: I26b5c1556d8068becd5c5a94067cc64d9d32b5e6
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459223
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For NVMe/TCP target, data segments which correspond to H2C or C2H PDU
will have any alignment, and _dif_generate_split will have to process
partial data block, particularly the following types:
- start and end are both within a data block.
- start is within a data block, and end is at the end of a block
According to the refactoring done in the last patch, this patch
exposes offset_in_block, data_len, and guard as parameters of
_dif_generate_split() and make _dif_generate_split() process
the above two types of data block properly.
The next patch will utilize the updated _dif_generate_split in
spdk_dif_generate_stream().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4211e65ead7fc256a40748412c670e46f83b1731
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457544
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For NVMe/TCP target, data segments which correspond to H2C or C2H PDU
will have any alignment. spdk_dif_set_md_interleave_iovs() have allowed
reading data to have any alignment but had required data segment to
be a multiple of block size.
In other words, spdk_dif_set_md_interleave_iovs() had required that both
ctx->data_offset and (data_offset + data_len) must be a multiple of the
data block size.
This patch refines the algorithm to remove the latter requirement.
The update implies that spdk_dif_set_md_interleave_iovs support any
data buffer whose size is less than a single data block.
The update doesn't change parameters of spdk_dif_set_md_interleave_iovs
and existing UT should be passed.
This patch adds additional UT code to test these updates.
Change-Id: I88c7d2a80a8d92b54863b6ad1c3a9d2761a6195d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457542
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This patch adds mechanism to simulate power failure in
blobstore unit tests at any given moment in time.
This point in time is measured by number of IO operations
occured after triggering power failure with the number
of IO operations given as a parameter. Number of IO
operations parameter can be defined as any type IOs,
writes, reads, unmaps, writes zero or flushes.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I7be45331bb5110f6c16f01fd7c4e7984b2d1977d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454451
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This bug was found by code inspection. When PDU read restarts
after data segment, iov_offset must be reduced by data length.
However iov_offset had been reduced by buffer length by mistake.
Lack of UT code was the main reason of this bug. Hence add UT
code to test the fix of the bug together in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I74f2f6ae8dca2e78a64bfdef8080c8031dfabb87
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458530
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Instead of doing some OS-specific magic to detect if the
spdk app has already initialized, just try to send it an
RPC. This serves mostly as cleanup, but also simplifies
test output in cases where the spdk app could not be fully
initialized. Previous waitforlisten implementation would
return as soon as the rpc subsystem was initialized, but
the app could have still failed on e.g. bdev initialization
later on. Since waitforlisten() returned success, the
script could continue its execution and try to execute
some RPCs. The logs from the SPDK app and the bash script
could easily mix, rendering the entire output not so clear
to the user.
To fix it, just try to send some RPC commands inside
waitforlisten().
Change-Id: I33eaf362e3cc645f8ea3ee22fd48db1643442129
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457562
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The test used waitforlisten() from autotest_common.sh to
wait for a socat instance and happened to work only by
a coincidence. As we can see in all the messages that
waitforlisten prints, that function is meant for SPDK
applications running an RPC server.
We're about to simplify waitforlisten a lot, so for now
just copy its current version to sock.sh and name it
waitfortcp(). Note that it already had to be stripped of
some rpc references.
Change-Id: Ibbe7cf67d20fbc277d407b20073154a96ddaaade
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458221
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Functions in this file already expect some variables
to be set by the calling script, so do the same with
$testdir and functions from autotest_common. We'll start
using `set -u` soon, so that variable expansion failure
will produce a clear error message (and will trigger ERR).
Change-Id: I3795af498639ad73a99cd03c6b5e72717fe5fd75
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458177
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
autotest_common.sh used to be sourced from
test/spdkcli/common.sh (and it still is - we'll clean
it up in a separate patch). Let's source that file in
each spdkcli test script, just like we do in every
other test script.
Change-Id: I2e021bcda7402ee0c5a4a5f45f921bb0142b6783
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458176
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This file is meant to be just sourced somewhere, so
don't include autotest_common.sh inside. Also, don't
hardcode the default pool file path. Expect
$default_pool_file to be defined already. We'll define
`set -u` soon, so that we'll get a clear error if it's
not defined.
Change-Id: Ie9bb86f8a65d05c9fb2d3e56b8682cab8dd569d6
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458175
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This test defines a variable for "default_pool_file" path,
but keeps using the hardcoded path anyway. Fix that.
Change-Id: I767fdff1eb6a4638a0e028ca8f04bd94582664e7
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458174
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Replace them with `testdir` and `rootdir` that we use
in every other test. What was a BASE_DIR before is now
a testdir and what was a TEST_DIR is now a rootdir.
While here, also replace all "$rootdir/test/pmem"
occurences with "$testdir".
Change-Id: I9e5b867bbc481c9c9d6ff25378b6eda60690dd08
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458173
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It's always set in autotest_common.sh, there's no need
to set it again in each test script.
Change-Id: Ib14c4189c553dad54a3065c1a1d413a5fc5a5347
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457466
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Replace them with `testdir` and `rootdir` that we use
in every other test. What was a BASE_DIR before is now
a testdir and what was a TEST_DIR is now a rootdir.
While here, also move autotest_common.sh include to the
top of the file.
Change-Id: Ie15b7ec14bfb7536bcc7b3787eed930798d24c78
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457464
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
In fio.sh we used `set +e` for bdev deletion RPCs
and for `wait $fio_pid`. Disabling errors from those
RPCs doesn't make sense. We expect FIO to fail due
to bdev hotremoval, but the bdev hotremoval itself
must succeed.
Besides, it's easy to forget to undo `set +e` so
don't use it. For `wait` we can use the following
paradigm instead:
```
rc=0
wait $pid || rc=$?
```
The same applies to nmic.sh, where we expect some
RPC to fail.
Change-Id: I66ce3504a0c6b5da497759f0688b6c0ea6480b61
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457463
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
If bdev is configured to use separate buffers for metadata transfer,
but it doesn't support the write zeroes command, pass empty zeroed
buffer to make sure the metadata is cleared out as well.
Change-Id: If6f024266067e5764a28a276296f651d31da4792
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457628
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
With this change, bdevio tests are not ran immediately
after starting the application.
This will allow to configure new bdevs via RPC and
run tests on demand during script's execution.
Change-Id: I9740fca92c26cb2a39fbdc7cfb132ad53cec3787
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455235
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There was a gap where nbd tests could fail, but without
trap set the app would still be present.
When here removed trap from end of the script since,
no part of the script set it up.
Change-Id: I0c435c7cd603410c2cd7a034bf955ab424e413f0
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457615
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Starting with this patch it is possible to remove a
snapshot if there is only a one clone created from it.
In such case snapshot can be removed without any data
copying. This is achieved with following steps (case
with only one clone):
1. Open snapshot (Snapshot1) that shall be removed
2. Check if the Snapshot1 has no more than 1 clone (Clone1)
3. Remove Clone1 entry from Snapshot1
4. If the Snapshot1 has a parent snapshot (Snapshot2):
4a. Add Clone1 entry to the Snapshot2 clones list
4b. Remove Snapshot1 entry from Snapshot2 clones list
5. Open Clone1 blob
6. Freeze I/O operations on Clone1
7. Temporarily override md_ro flag for Snapshot1 and Clone1
for MD modification
8. Merge Snapshot1 and Clone1 clusters maps into Clone1
clusters map
9a. If Snapshot2 is present switch parent ID and backing
bs_dev on Clone1
9b. If Snapshot2 is not present set parent ID to
SPDK_BLOBID_INVALID and backing bs_dev to zeroes_dev
10. Sync MD on Clone1
11. Sync MD on Snapshot1
12. Restore MD flags for Clone1 and Snapshot1
13. Unfreeze I/O on Clone1
14. Close Clone1 blob
15. Remove Snapshot1
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I800724b981af894e01e1912d0077c5b34a2ae634
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445576
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Report issue on ubuntu18 :
"spdk/autobuild.sh: line 55: hash: scan-build: not found"
Check that ubuntu18 should install this package:
apt-get install -y clang-tools, to fit version of ubuntu18
and later.
Move clang-analyzer which for fedora to vm_setup.sh as well.
Change-Id: Ia702c492f8b0f64705c7c15ee57a861ca14521f9
signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457554
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
SQSIZE parameter validation in Connect command was broken because QID
field in qpair was used before intialization.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I8a0b359937d661df3b9888e6084e7d0b4a9056ea
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455667
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In a test case of op_login_session_normal_test(), it is expected that
the tag of the session has any value different from the connection but
the tag of the session was not initialized.
Fixes#826
Reported-by: lorneli <lorneli@163.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I62f7a4bd301c5a74ad6ba10b1b448189f750b324
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458339
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Lorne Li <lorneli@163.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch changes the meaning of the data_len parameter of
spdk_dif_set_md_interleave_iovs from `Expected data length of the payload`
to `Expected length of the newly read data in the extended LBA payload`.
This change will align the parameters of spdk_dif_set_md_intereleave_iovs
to of spdk_dif_generate_stream.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7f9c45e78be977625713acb79d2ae82d4375f419
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457543
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Previously RPC returned just number of cases that failed,
meanwhile return from the command was 0.
Now whenever there are failures, error is reported via RPC.
This will allow to use it in bash scripts with set -e used.
Change-Id: I34997dd5f08b561bc55f391287f9942861bda57a
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457614
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There are some leaks in libiscsi that is external to SPDK.
With this patch, any leaks in libiscsi will be suppressed.
Please see examples of the leaks right now when running
bdevperf in initiator.sh test:
Direct leak of 176 byte(s) in 1 object(s) allocated from:
#0 0x7fd64dddfe50 in calloc (/lib64/libasan.so.5+0xeee50)
#1 0x7fd64c60edb4 in scsi_cdb_inquiry (/usr/lib64/iscsi/libiscsi.so.8+0x13db4)
Indirect leak of 256 byte(s) in 1 object(s) allocated from:
#0 0x7fd64dddfe50 in calloc (/lib64/libasan.so.5+0xeee50)
#1 0x7fd64c603a84 (/usr/lib64/iscsi/libiscsi.so.8+0x8a84)
Indirect leak of 52 byte(s) in 1 object(s) allocated from:
#0 0x7fd64dddfe50 in calloc (/lib64/libasan.so.5+0xeee50)
#1 0x7fd64c60d755 in scsi_malloc (/usr/lib64/iscsi/libiscsi.so.8+0x12755)
#2 0x7fd64c6097f8 (/usr/lib64/iscsi/libiscsi.so.8+0xe7f8)
Change-Id: I80ef23b1464841f683344c7aab99f1658a46cd36
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456766
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
ASAN needs to be LD_PRELOADed before SPDK fio_plugin
in order to analyze its code.
Just adding that will report any issues in fio binary as
well as the fio_plugin.
To prevent known fio leaks from affecting the results,
a suppression list for LeakSanitizer (used in conjunction with ASAN).
At this time the suppression list contains known leaks
for fio 3.3. The list might need adjustments as fio
version is updated.
Side note. Even though it is possible to specify directory
to ignore ("leak:/usr/src/fio/"). Which in theory should
suppress any leaks in fio. It has side effect of hiding
SPDK leaks as well, since the fio_plugins leaks are
seen as coming from /usr/src/fio/ioengines.c.
See below for examples of each suppressed error:
Direct leak of 42 byte(s) in 4 object(s) allocated from:
#0 0x7f9d52f3e320 in strdup (/lib64/libasan.so.5+0x3b320)
#1 0x41f267 in get_new_job /usr/src/fio/init.c:490
Direct leak of 914936 byte(s) in 10397 object(s) allocated from:
#0 0x7f74422e8ea6 in __interceptor_calloc (/lib64/libasan.so.5+0x10dea6)
#1 0x46402e in log_io_piece /usr/src/fio/iolog.c:214
Direct leak of 608 byte(s) in 19 object(s) allocated from:
#0 0x7f74422e8ca8 in __interceptor_malloc (/lib64/libasan.so.5+0x10dca8)
#1 0x44c4e1 in add_to_dump_list /usr/src/fio/parse.c:1039
#2 0x44c4e1 in parse_option /usr/src/fio/parse.c:1098
Direct leak of 173 byte(s) in 20 object(s) allocated from:
#0 0x7f744227153d in strdup (/lib64/libasan.so.5+0x9653d)
#1 0x44b50d in __handle_option /usr/src/fio/parse.c:718
Indirect leak of 111925528 byte(s) in 1271881 object(s) allocated from:
#0 0x7f74422e8ea6 in __interceptor_calloc (/lib64/libasan.so.5+0x10dea6)
#1 0x46402e in log_io_piece /usr/src/fio/iolog.c:214
Indirect leak of 171 byte(s) in 19 object(s) allocated from:
#0 0x7f744227153d in strdup (/lib64/libasan.so.5+0x9653d)
#1 0x44c4ed in add_to_dump_list /usr/src/fio/parse.c:1040
#2 0x44c4ed in parse_option /usr/src/fio/parse.c:1098
Indirect leak of 167 byte(s) in 19 object(s) allocated from:
#0 0x7f744227153d in strdup (/lib64/libasan.so.5+0x9653d)
#1 0x44c502 in add_to_dump_list /usr/src/fio/parse.c:1042
#2 0x44c502 in parse_option /usr/src/fio/parse.c:1098
Change-Id: I9b5811993508421be50b12af160645c77ea93d7e
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456315
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The lvol "tasting" done as a part of bdev examine is
done asynchronously in background, so we need to sleep
for a while before checking the list of created lvol
bdevs.
Fixes#801
Change-Id: Iab94ac5c66d329cd93955b53262fc03c6b3c9f3a
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458228
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Make it able to run as standalone.
Change-Id: Ib8d5dcd300911978f3bd9192c00049a3617438f4
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457961
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Scripts were using a mix of two approaches, lets unify that so
just dollar-parenthesis syntax is used.
Change-Id: Id093b6c82d1f766ba6af13bed720977eceaa7ffc
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457744
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch adds the UT regarding below function
iscsi_op_login_session_normal()
It covers the target related, connection related
and session related operations.
Change-Id: I570df82df850a0b359b2d57b4e1694d8cb16de37
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457925
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
stay the print parameter same with it in the deallocate_complete().
Change-Id: I21734f2b3097fd3a1006e390ab87b0578f0cbc2a
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458029
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Partprobe is a program that informs the operating system kernel
of partition table changes, by requesting that the operating system
re-read the partition table. For instance, if you create a new
partition on one of your disks using parted, you should run
partprobe afterwards to make the kernel aware of the new partition
configuration.
This is useful for issue #799.And it's compatible with other systems.
Change-Id: Icd4c85193bd9d9e6c2b32b8463e75c7a6ff06f34
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457735
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
NVMe bdev module support separate metadata now but NVMf subsystem
cannot process bdev with separate metadata yet.
Hence reject any bdev with separate metadata to be attached
explicitly by this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I793c6c5f61deb766d7bf427ff67ccc57a48974cf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457167
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Those tests are absolutely awful. For the last few days
they've been randomly failing way more often than usual
and we have no way of figuring out what the root cause is.
We know it's 'discover_bdevs' that hangs, but since it
doesn't produce any output (all redirected to null), we
can't get any relevant information out of it. The only
way to move forward is to rewrite this entire test from
scratch.
Change-Id: Ie874110008f82f3ca0dd62f733b0dac73160fbb8
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457766
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We used `set +e` before bdev deletion RPCs and
`wait $fio_pid`. Disabling errors from those RPCs
doesn't make sense. We expect FIO to fail due to
bdev hotremoval, but the bdev hotremoval itself
must succeed.
Besides, it's easy to forget to undo `set +e` so
don't use it. For `wait` we can use the following
paradigm instead:
```
rc=0
wait $pid || rc=$?
```
Change-Id: I8716bd861eae85d7a8590d4bd26a65cfa10e0dc1
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457469
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For reservation feature in NVMoF, we can't support the persist through
power loss feature, now we will add the configuration file parameter
with Namespace, after users set the configuration file parameter with
one NS, then the PTPL feature can be enabled.
Change-Id: Id72699093f7e68318b9529f7bacc5c9804f7f86b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455905
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch uses the change by the last patch to initialize DIF
context in SCSI layer. Besides this patch changes the name of a
parameter from offset to data_offset to clarify the meaning.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I54bf1168ec5959432aa15dae0360c0640138b033
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457541
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Data offset are intended to correspond to DATAO in NVMe/TCP and
Buffer Offset in iSCSI.
Previously for iSCSI, buffer offset had been merged to start block
address, but passing buffer offset separately from start block address
clarifies the logic more.
On the other hand, for NVMe/TCP, passing DATAO separately from start
block address will be critically important because DATAO will bave any
alignment and will be necessary to use for not only reference tag
but also guard computation.
This patch adds data_offset to struct spdk_dif_ctx and adds it to the
parameters of spdk_dif_ctx_init(). ref_tag_offset is also added to struct
spdk_dif_ctx and it is computed by dividing data_offset by data_block_size
and is used to compute reference tag.
The next patch will use this change when getting DIF context in SCSI.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id0e12ca9b1dc75d0589787520feb0c2ee0f844a5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457540
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
DIF UT code had used numerics extensibly for complex DIF insert/strip
UTs. But numerics was error prone and difficult to follow the logic.
Hence this patch changes numerics to variables in DIF insert/strip UTs.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I40cb27167c068855dc5d1eb9e0f36818d39c73fa
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457539
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
data_offset to spdk_dif_generate_stream() was wrong but the function
worked as expected because the wrong data_offset was in the same
data block as the correct data_offset.
But the subsequent patches will refine spdk_dif_generate_stream()
and this bug will cause UT failure. Hence fix the bug up front.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I45f2302deaf377fda0ec5454c61fb463231a39db
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457538
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It's randomly times out on waitforlisten. See #815
Change-Id: Ib9a75d0a96756810cb25f2a1ddf72bc800ea4b5c
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457483
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Read requested range of lba map during relocation
instead whole lba map.
To read partial lba map range single move now has
three states: read, read_lba_map and write.
Free queue and write queue were merged to a single
move queue.
Change-Id: I86839f2286d42d4debf87cea40091370e5283b15
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454747
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Keep track of read lba map segments to avoid
unnecessary traffic in case ANM events.
Lba map is divided on 4KB segments which can
store 512 lba entries.
In case multipe read request on same segment
keep pending request list and process it in
read_lba_map() completion callback.
Change-Id: I2661bdb716ab7c975140e0b37aebcb17aa23901d
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453371
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is to solve below issue:
error 'Fio job '\''/migration-tc1.job'\'' does not exist'
Change-Id: I60dc6254d238878b03c5faf341b3201643286dfe
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457453
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This doesn't make difference right now, but would be
useful if we printed $BASH_SOURCE or $LINENO in xtrace
(via PS4). Those two will now point to the original
line where xtrace_restore was called rather than
always the single line inside autotest_common.sh.
Change-Id: Idf3ac8d00ad9610960678351014334013149b88d
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456964
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Moving verifying test parameters to single function function.
This is start of series that will add RPC to start bdevperf tests,
allowing configuration beforehand.
In future verify_test_params() will be used to verify parameters
passed via RPC as well.
Change-Id: I0aff7d9fa9f99205b3559b0ea081aa3690013faa
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457223
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
For the nvme device, I/Os are completed asynchronously. So we
need to check the outstanding I/Os before putting IO channel
when we hot remove the device. We should be sure that all the
I/Os have been completed when we change the sgroup->state to
PAUSED, so that we can update the subsystem.
Fix#615#755
Change-Id: I0f727a7bd0734fa9be1193e1f574892ab3e68b55
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452038
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We're about to make SPDK vhost work against the upstream
rte_vhost from DPDK 19.05+ and vhost-nvme tests currently
stay in the way. vhost-nvme is only supported in our
modified rte_vhost fork and while it could be implemented
entirely in SPDK against the latest upstream rte_vhost
APIs, there are just no plans to do that now.
For that reason we disable all vhost-nvme tests.
Change-Id: I2d43bbe75dcab7535e7b1254ca75cb78b6d446fa
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456960
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Allow the user to select target bdev to be used by bdevperf. It's useful
when the config contains multiple bdevs, but only one is supposed to be
utilized by bdevperf directly.
Change-Id: I51aa645dcf60a4413057d86f68fe24442b280367
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456787
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The target list is now updated inside bdevperf_construct_target. That
way, if the target is successfully created, it'll already be on the
target list once this function finishes.
Change-Id: I364c45005c28deadae37615b6ac85f3860fc5080
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457089
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Normal return for qemu checking , this should check before vhost/common.sh.
For qemu not installed on this machine. It may be a VM. Skipping nvmf_vhost test.
Otherwise, code will exit 1 before this normal return.
And in vhost/common.sh should with qemu checking.
Change-Id: I2285fffa6fc4384b4b172e5c443019e9ab391fa0
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456123
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Almost all I/O callbacks in ftl utilize data in ftl_io, which is
initialized as callback argument in ftl_io_init_internal. This patch
changes the behavior to always returning the ftl_io struct in addition
to an extra opaque buffer.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I611ab1b33575f599798a2bb65c231a724c852c7f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455831
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
disable FIO norandommap flag because it is incompatible with
verify which in context of async IO could cause verification errors.
More on norandommap:
https://fio.readthedocs.io/en/latest/fio_doc.html#cmdoption-arg-norandommap
Change-Id: I94392495a1f9f06360e3791fca31b88908d19dcb
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457001
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We check if get_ocf_bdevs after shutdown is the same as before,
which shows that state for all vbdevs wes correctly restored from metadata.
Change-Id: I9089642aeb840fc940b07908aa39c8193887432f
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455424
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Set serialize_overlap=1 to prevent data races.
This solves the issue of fio --verify fails in OCF tests
when persistent metadata is enabled.
Example:
https://dqtibwqq6s6ux.cloudfront.net/public_build/autotest-per-patch_33325.html
The serialize_overlap flag prevents from
creating undefined regions by doing simultaneus writes
(occurs on certain storages).
More on that:
https://fio.readthedocs.io/en/latest/fio_doc.html#cmdoption-arg-serialize-overlap
We should probably use this flag for all FIO --verify tests.
Change-Id: Ia4f73f9900835faf4f94018f1d148fb64f06dc8a
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456991
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Data block size was specified by mistake, and this patch changes
to use block size instead.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Icfb1df40438ef82211279b0b7c79036283744361
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456292
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Keep lba map related fields in separate struct directly
in the band. Cleanup interfaces depended on ftl_md.
Lba map structure will be extended in next commit.
Change-Id: I1cfc2f2ff0c0e90bb63f39808780845673002e70
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453370
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Extended ftl_band_read_lba_map() interface to provide
range of lba map to read.
Added ftl_xfer_offset_from_ppa() function for
calculating offset of read portion of lba map
based on ppa address from IO. This offset is
used for coping read lba map portion to internal
ftl buffer.
Change-Id: I1c72a18c79eda8c33cd0b20ea36a5d9521a09d06
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449435
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Further patches in series will modify the suppression file,
so this patch now creates such file in /var/tmp/.
Meanwhile adding the known false positive to the list.
Any known false positives or leaks in external libs/execs
should be added by adding further entries to the suppression
file.
Change-Id: I7b78d900a86c6eca0b41240fb34dc4f7ad597079
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456622
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds functions in autotest_common.sh,
fio_bdev() and fio_nvme() for their respective plugins.
It simplifies its usage throughout the scripts.
Additionally will help with expanding the fio cmd
line with nessecary changes only in single place.
This will be used in next patch in series to
LD_PRELOAD ASAN before fio_plugin.
Note: Did not implement changes for perf scripts,
since they are usualy run separately and didn't want
to affect those.
Similarly didn't change vhost initiator tests,
because the exported directories do not work for
inside the VM. Will need to think of a way to change it
there as well.
Change-Id: Idf750ee7aa9d5e30efc0ce430d15fa45ceccb203
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456314
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
SPDK_SUCCESS is a remnant and all other SPDK libraries have used
just 0. So this patch removes SPDK_SUCCESS from iSCSI library and
uses 0 instead.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie33fd26238411e994ea9ea0c898da1abb502cad6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456928
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Data digest computation should take extended LBA payload but
could not do yet.
This patch adds an new API spdk_dif_update_crc32c() to compute
CRC-32C value for extended LBA payload.
In the next patch, spdk_dif_update_crc32c will be used in iSCSI
target first.
Change-Id: I327f384bb7dfd8b68279b0acec0ee78a40264a26
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456171
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This sends an RPC to the vhost target with the given number.
Change-Id: Ifd74443087475242d3a65a0e8621dcd20ab2d1b0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456703
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
No need to prefix name with spdk.
Change-Id: I9b07a52f6c88d77e1dda2c63ec951c1847780cca
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456702
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
No need to prefix name with spdk.
Change-Id: I413f78fac427a0955db495bb926bf8d6bc3dfb2a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456701
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We typically don't prefix bash functions with spdk.
Change-Id: Icda57e42acb83f4aa51731ac62f8db7ee26e658a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456700
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Nothing used this anymore. Everything is json.
Change-Id: Iaa1239422e18436b3b8819ce734955683ec63735
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456699
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
DPDK rte_ring_enqueue_bulk() has free_space parameter to return
the amount of space in the ring after enqueue operation has finished.
This parameter can be used to wait when the ring is almost full and
wake up when there is enough space available in the ring.
Hence we add free_space to spdk_ring_enqueue() and spdk_ring_enqueue()
passes it to rte_ring_enqueue_bulk() simply.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9b9d6a5a097cf6dc4b97dfda7442f2c4b0aed4d3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Fix the following nightly failure:
> migration.sh: line 56: vhosttestinit: command not found
Change-Id: I56135c2a83de2455238eb7d40de973459019d63b
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456758
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This test sends identify controller command to the NVMe device.
Change-Id: Icc262a1a1fa52bafe5cb019151c3d196bd268673
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454609
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Use the new nvmfappstart to simplify this script a
bit and bring it inline with the other nvmf scripts
that have been updated recently.
Also remove the comments about aer with temperature
threshold. We use namespace notifications to test aer
now, so there's no need to try to resurrect the
temperature-based tests.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9c66ed4c9456acb39d6c64d55153304eb6e07100
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456706
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change autotest.sh to pass --transport=rdma. But this
now allows someone to run nvmf.sh with --transport=tcp
to run all of the nvmf tests with the tcp transport!
Initial testing shows that bdevio.sh fails with tcp,
so only run this test with the rdma transport. Issue
#808 has been filed - once it's resolved this
restriction can be removed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie50de4d67e504c84d6d8eebfe2b8c68b14f4ba2b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456698
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
While here, remove NVMF_TCP_IP_ADDRESS since we already
have NVMF_FIRST_TARGET_IP which serves the same purpose
when testing the TCP transport.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7cc4712cd9746377937e889127aa5a61566d8846
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456705
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We also no longer hardcode TEST_TRANSPORT=rdma. Users
of the individual test scripts must now explicitly
pass --transport=rdma. Support for tcp will be coming
in future patches.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I819d69cb0906eb27b692eb2755aca5085298d779
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456685
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Right now this is empty, but we'll add to it later as
part of parameterizing this script for different transports.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icf0f67ce4dd886031c37986b352129d3c556bd92
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456684
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This prepares for using scripts for tcp testing as well.
Note that this patch just hardcoded TEST_TRANSPORT to
'rdma' for now. An upcoming patch will require the
caller to pass --transport=rdma instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I085fdf51910aaf960959c71c73a187be41fd7ee8
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456667
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A lot of places were still hardcoding 4420 directly.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iff8a549addeb05e441fe3b035a84a0f8a6bf2205
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456666
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This script was developed in parallel to some of the
script infrastructure improvements. So fix it up to
match the more recent changes - including leveraging
the common setup of the NVMF_FIRST_TARGET_IP, and removing
the parameters to nvmftestinit/nvmftestfini.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6cc4ef30325961822014e2835e575a950c53ecc0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456665
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Waits up to 2 seconds for a bdev to arrive, if not returns error.
In the next patch in this series this is used and seems like a good
general function.
Change-Id: I3402f34f3dad3d7373973dc785520a5c4e58cd14
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456091
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
we use this statement:
while (g_file->length_flushed != buf_length) {} in
file_length function.
It means that in this test case, length_flushed are
accessed by two different threads, so better to
use another new variable length_flused with volatile
before the variable definition. Then our ut will not hang.
Change-Id: I6152a4ba3f27f0fad1c8c2baa71324a36a2fb9e8
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456580
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There's no need to set this every time we allocate
a request.
While here, fix a typo near where we needed to modify
the unit test to remove the qpair assertion.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8af41a6c483415950f625d1ed2ef46088b75a622
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456270
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Use separate buffers for metadata transfer if bdev supports it.
Change-Id: Ie0fa3d3c1f5b14f99c13f2d6b5b22edc216c6d64
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451468
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
vring notification mechanism is transport-specific. At present, vhost
dataplane code in `lib/vhost/vhost.c` triggers guest notifications with
`eventfd_write()` system call. But this is an AF_UNIX specific
notification mechanism. This patch replaces `eventfd_write()` with the
existing generic `rte_vhost_vring_call()` function that is part of
DPDK's librte_vhost public API.
`rte_vhost_vring_call()` takes a vring_idx as an argument to associate
the `struct spdk_vhost_virtqueue` instance with the relevant `struct
vhost_virtqueue` instance. We introduce a new `vring_idx` field in
`struct spdk_vhost_virtqueue` to enable this association. This field is
initialized in `start_device()`. In addition, a stub for
`rte_vhost_vring_call()` is added in the vhost unit test file.
SPDK's internal `rte_vhost` copy will not be updated in order to support
the virtio-vhost-user transport. However, an `rte_vhost_vring_call()`
function is introduced in SPDK's `rte_vhost` in order to have a solid
API. This function is just a wrapper of `eventfd_write()`.
Change-Id: Ic93e25cd3f06e92f04766521bc850f1ee80b8ec8
Signed-off-by: Nikos Dragazis <ndragazis@arrikto.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454373
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Keep an array of iovecs tied to each IO. Internal IOs can have
iov_cnt > 1 without having to allocate additional memory. User's iovec
can now be modified too (e.g. when splitting the request).
Change-Id: Iec73c6dad59acdc331a1461fd7feac085138a8de
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455525
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
There's no point in synchronously returning an error from ftl_io_write
/ ftl_io_read as they're also reported in the IO's completion callback.
All errors are now reported through io->status.
Change-Id: I4adf4e13221b63715625276042e1172cd63b8f9b
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455521
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Some of the internal IOs split the contiguous data buffer into multiple
iovecs to separate the requests. It's unnecessary and can be replaced
by checking the position within the data buffer.
Change-Id: I9255ea0072fee6c4e6a7dca21e4008780bc45610
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455519
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This script was getting a bit unwieldy. adding argparse will make it
easier to add more options in the future or to set default values and
validate arguments going forward.
Change-Id: I1ffdbdf2082287ceb8a88cd3eb6ecf9bbd6c9e11
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455724
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This isn't needed, and it actually results in warnings
when linking with LTO enabled.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4e7dcd5d3f738fb3e53e35a1fff154a0e1ab06d3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456238
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Existing code in spdk_bdev_write_zeroes_blocks() will call spdk_bdev_free_io()
for the error case, which will cause assertion because the bdev_io isn't
submitted to the backend yet, so we will check the condtion first to
avoid the error case.
Change-Id: If27d78217f709a3315e74c00869d345abd6b9a69
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453491
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This module simply sits on another virtual bdev
and adds a simulated average and p99 latency to that drive.
Change-Id: Ie9fc91e27585fd0636cb7dc845cb41744bf24625
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453594
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
When a new python script wanted to use RPC client or calls
from RPC lib from ./spdk/scripts/* it had to be created
within that directory.
By expanding PYTHONPATH in autotest_common, now any python
scripts can use that library.
First example of this is located in:
./spdk/test/bdev/bdevio/tests.py
Change-Id: Idf3e5891c3815a84c70525ab9338100acbfa4a43
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455219
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
New RPC added specifically to the bdevio app.
It will launch all tests on all targets by default.
When optional parameter for bdev name provided is supplied
tests will be ran against just that bdev.
After finishing, the application will await another RPC.
stop_init_thread() and __run_ut_thread now pass json request.
Added separate test.py to not pollute rpc.py with custom RPC
just for the bdevio application.
Added '-w' argument to the bdevio app, so that instead
of performing the tests immidietly - it awaits RPC.
After a lot of changes to blockdev.sh, we might end up
removing this argument and just use it as default.
Change-Id: I82e52352bdf8082c1712caa223ad5ab78aa4e7fa
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455200
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
All the SCSI commands have two states: allowed and conflict,
based on different reservation types and I_T nexus, the SCSI
module will check each commands before sending to the backend
device.
Change-Id: Ib05cece1c237873360f85c68d139362200d2d47e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436097
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
NOTE: pulling the vbdevcompress change into its own patch...
While enabling reduce testing in autotest a few issues were found
in autotest in that some options were being set based on the existence
of a header without checking the test flag, if one existed. Then at
the end of adding options, specific test flags were checked for 0 and
the configure updated to --without. So, to make this easier to read,
the options are organized in sections and where there is a header
dependency as well as a test flag, both are chcekced at the same time.
Change-Id: I8cdc6914906500bbac63528eb541e2b235feb797
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455137
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add the unit test of the nvme ctrlr init delay to increase
the code coverage.
Change-Id: I0d31055fafc1ad13682496163e15de0a5f1e90e3
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455344
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
After iSCSI login sysfs is not updated immediately, but when session is
initialized. It can take a while and causes that sometimes scripts
cannot write to sysfs.
Change-Id: Ie4fa512704f022041bb3d9ab02dbb4210ddd04a0
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454890
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
rootdir is the pattern used in the other tests
Change-Id: Idaedf8a3d9aeed54a9113a38986f29fa04355d9a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454797
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The vhost tests create some temporary files as they run outside
of the SPDK repostiroy. Clean these up.
Change-Id: Ic964fc6672b8a4ea088ace1b11c712eb70f7be08
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454933
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Ubuntu18 integrates librxe to rdma-core, libibverbs-dev no longer ships infiniband/driver.h.
Don't compile librxe on ubuntu18, install package rdma-core instead. ubuntu16 keeps the old
method. Otherwise, there's no NIC can be found for SoftRoCE failed.
Change-Id: Ib639b96a4229c79f2b27fda7b981d7a805f808cb
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455336
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Before simplifying test suite execution it was needed
to loop around function actually running the tests.
So the test functions now can directly contain whatever
that was doing, without intermidiate function between.
Change-Id: Ic4b648d8d26d6be7a3bf1efb1b1ee3f2615ee5fa
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455672
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The QoS test no longer sets arbitrary QoS limits and
can no longer run into cases where disk is not able to
even reach that limit. We can reenable it for per-patch
testing now.
Change-Id: If05b1306c38889840c071a165b00c44295610950
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454670
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
check_qos_works_well() has been split into two separate
functions: run_fio() and verify_qos_limits().
Change-Id: I8c112ab93aed9f16d80c9a0a3f61280c44bf6539
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451888
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We used to set an arbitrary qos limit which in some
cases happened to be higher than the actual disk
capabilities. Even though we had an explicit check
for that and we skipped the entire qos test suite
if the device was too slow, the disk performance could
vary and be just enough to pass that initial check,
but then slow down and fail in the middle of the test
suite. If the bdev maxes out at 21MB/s on one run, it
may just as well do 19MB/s on another. That is exactly
the case causing intermittent failures on our CI.
We fix it by removing the arbitrary qos limit and
setting it to a % of the maximum disk performance
instead. This lets us e.g. remove the code for skipping
the entire test suite when the disk is too slow. We
definitely don't want to skip any tests.
Change-Id: I6de8a183c00bab64484b4ddb12df1dedfbed23f8
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451887
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Make the old name a deprecated alias.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibbf50676e0d989b67121e465fc140f94faec46ed
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453033
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
These are used when running test scripts in iso mode at
your desk.
Change-Id: I1876771d8a94c9db57636c143f7bf9d6f98bd3aa
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453441
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
With this patch each target has separate suite,
tests are ran just once for all setup suites.
Suite init/fini functions were added that move
current g_current_io_target ahead for next suite.
Results what works for particular bdev are of more use
rather than combination for all bdevs.
This will come useful when we want to perform RPC for only
select targets.
In case of CUnit library error, application is stopped without
returning number of failures. This is because at that point
its numbers are not reliable.
Change-Id: Ie82b6e33374841bf829da09a16a401fddd1fd81c
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455199
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
We flush a cache buffer once it's filled. When the write
for that cache buffer has completed, we look to see if
there's more data to flush. Currently if there's *any*
more data to flush, we will flush it, even if it's not
a full buffer.
That can hurt performance though. Ideally we only want
to flush a partial buffer if there's been an explicit
sync operation that requires that partial buffer to be
flushed. Otherwise we will end up writing the partial
buffer to disk, and then come back and write that data
again later when the buffer is full.
Add a new unit test to test for this condition. This
patch breaks one of the existing unit tests which was
designed specifically around a RocksDB failure condition.
Change that file_length unit test to now write exactly
one CACHE_BUFFER, which still tests the general logic
making sure that we don't confuse the amount of data
flushed with the value written to the file's length
xattr.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I83795fb45afe854b38648d0e0c1a7928219307a2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455698
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Data can get implicitly flushed as cache buffers are filled. But
the length xattr is only written in response to a sync or close
operation. So we cannot just look at the amount of data flushed,
and ignore the sync operation if all of the data written has been
flushed - we still need to write the length xattr.
This also adds a unit test which reproduces the original problem.
Fixes issue #297.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icca6ef4d1544f72e9bc31c4ee77d26b4b7f0cce4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455692
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We don't provide windows executable for this test.
Change-Id: Iedaafba06662f776c102528f8073b6c3d56bb323
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450406
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Recently, we moved the check for running an installed version of DPDK
above the point where we export the SPDK_* test flags. This resulted in
SPDK_RUN_INSTALLED_DPDK being undefined when trying to check fi we
should run against an installed DPDK. This just caused autotest_common
to print an error message every time it was loaded. I don't think that
it actually caused any errant behavior but this gets rid of the error
message. It's also probably a good idea to keep these definitions as
close to the top of the file as possible.
Change-Id: I5aadbe5c925ecf1ac92926b75c8c043aab73b36b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455456
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For the latest TLC NAND, one write buffer unit (rwb batch)
needs to be spread over three PUs instead of being allocated
to a single PU for better sequential read performance
since the optimal write size(ws_opt) of 3D TLC NAND is
3 times bigger than the optimal read size(rs_opt).
I added num_interleave_units in 'struct spdk_ftl_conf'
to configure the number of interleaving units per ws_opt.
If num_interleave_units is set as 1, the whole of the ws_opt
blocks are placed sequentially around each PU.
If num_interleave_units is set as N, the 1/N of the ws_opt
blocks are staggered. So consecutively numbered blocks
are separated by ws_opt / num_interleave_units.
The sequential read performance is improved from 1.9GiB/s
up to 2.97GiB/S with this patch on our system. No performance
degradation is observed on sequential writes or
4KB random reads/writes.
Please refer to the Trello card for more details.
https://trello.com/c/Osol93ZU
Change-Id: I371e72067b278ef43c3ac87a3d9ce9010d3fcb15
Signed-off-by: Claire J. In <claire.in@circuitblvd.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450976
Reviewed-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In some cases user may want to flag blob for removal
then do some operations (before removing it) and while
it happens there might be power failure. In such cases
we should remove this blob on next blobstore load.
Example of such usage is delete snapshot functionality
that will be introduced in upcoming patch.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I85f396b73762d2665ba8aec62528bb224acace74
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453835
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To establish a persistent reservation the application client shall first
register an I_T nexus with the device server. An application client registers
with a logical unit by issuing a PERSISTENT RESERVE OUT command with REGISTER
service action or REGISTER AND IGNORE EXISTING KEY service action.
Specify Initiator Ports (SPEC_I_PT) bit and All Target Ports (ALL_TG_PT) bit
are not supported for now, the registrants belong to the I_T nexus who sends
the command.
Also Activate Persist Through Power Loss (APTPL) bit will be supported in
following patches.
Change-Id: If057a764a4bfa73017f98048c94b697dbfa4b4a1
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436088
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Good suggestion from Darek - let's just always
parse common script args from autotest_common.sh.
These arguments follow common arg naming conventions
(i.e. --iso) so there's no harm just doing this for
any test that sources autotest_common.sh. This has
the nice effect of not requiring scripts to
explicitly call this function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id89b68c22557a5a771be407873d0e57843f0d05a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455552
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Modify FIO test to use all cache modes that we support,
including WriteBack
New test config uses Nvme bdevs instead of mallocs because
memory is an issue when testing OCF
Change-Id: I3abec9605b61791f8ebaaaf08b88a011a50d3f26
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451022
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tests for checking read-only option no longer fail.
Removing rootdir variable and sourcing commands as
*_vm.sh scripts are designed to be run as standalone
inside spawned VMs.
Change-Id: I491ebf8e2b305539e3fabdc6219ea53693ad2883
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455203
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
iscsi test scripts can now take two arguments -
"iso" and then the sock type (posix or vpp). They
need to be in that specific order too. nvmf test
scripts also support "iso" and we want to add
the transport type (rdma or tcp) as well. Even further
out, we may want to use a sock type for nvmf, i.e.
tcp transport with vpp.
We also have the iscsi_tgt fio_remove_nvme.sh test
that does both iscsi and nvmf.
So to make this all work a bit nicer, add a new
function called parse_common_script_args that
will take the command line arguments to a script
and set the appropriate variables, including defaults
when a specific parameter isn't specified. We will
use getopt-like behavior for this also, instead of
enforcing a specific parameter order. Then a script
could be called like this:
test/nvmf/target/shutdown.sh --iso --transport=tcp --sock=vpp
Individual test scripts then just need to do this
after sourcing autotest_common.sh:
parse_common_script_args $@
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifb8d7666384991482a2d425e26ffa7525b9ac15a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455283
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Apart from writing the data to OCSSD, mirror the latest two bands of
data on the persistent write buffer cache. Currently the data is only
sent there, further patches will add metadata support, shutdown recovery
and L2P updates.
Change-Id: Ief05d0c23fa0e25bd6085e0ce3e1528d6736d174
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450266
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously it was explcitly set to NULL, so that
the application didn't even setup up the socket.
Change-Id: I2174fe0ff5790efd6578807f17702978cd9cf451
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455197
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Adding app_rpc and bdev_rpc allowing every kind of RPC
interaction with the app.
Change-Id: I738095686dc8ad61101a998b473df63cddc490a2
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455196
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Installing this package "open-isns-utils" always with pop-up dialogs,
we don't want to these dialog, so add --no-install-suggests
--no-install-recommends to prevent it.
Use sudo apt-get remove --purge * to simulate.
Change-Id: I0b892b9e0c88c82ab9461a92e71dc0d9823ecaf9
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455333
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Adding these tests identified a small fix in the code under test
that is also included here. The compressdev 'produced' field
is unsigned and reduce is expecting a negative errno in the
callback.
Change-Id: I28ab11ee3ef54768a9d6ccd26282cf7dd022be43
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454806
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
mk/nvme.libtest.mk includes mk/spdk.common.mk, but all
of the Makefiles including mk/nvme.libtest.mk were
also including mk/spdk.common.mk unnecessarily. So
remove the spdk.common.mk include from all of the
offending Makefiles.
This was relatively harmless, although it would cause
weird things like CFLAGS and LDFLAGS getting duplicated
when building.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie60637db3c19a2ead097562b2adf6573dbe27472
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455321
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This avoids conflict with the nvme perf tool. PGO
gets confused during building - we may have data for
nvme/perf which it then tries to use when building
ioat/perf. Renaming the ioat perf tool fixes that
problem.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib1084d56d671e44027ea05f453075a723f067580
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455320
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There's a bug in Linux 5.1 (possibly 5.0 too) where
the kernel initiator driver crashes if it can't get
one queue per CPU. This will get fixed eventually,
but for now we need to remove the cases where we
restrict the number of queues per controller so that
we can test on newer kernels.
Even on cases where we're testing the SPDK initiator,
there's no real need to restrict the number of queue
pairs.
The kernel will eventually get fixed, but we should
be testing with default behavior anyways (the kernel
wants lots of queues). We'll also want to add some
regression tests to make sure the kernel doesn't
break again. But that will all come later.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9979e6d94456e075688b822b042936b63e518a4a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454819
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Don't do it at runtime, do it just once on script initialization.
Change-Id: Idb345fc0f72d3a41072d830b11a520584ec8b321
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451886
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Do a single RPC instead of two, cache the result,
parse it twice.
Change-Id: Ib0ae19da5cb6b6db7bf1a46c3960104d1975afdd
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451885
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When parent IO was splitted into several children requests, SPDK
may return parent completion callback with error status before
all the children requests are finished.
Change-Id: I63221a0ae1a5925a7fcd9744b4f5d8079c641252
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453611
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Lightweight threads may now be exited by calling
spdk_thread_exit() within the thread. The framework
polling the thread can release the resources associated
with that lightweight thread by calling
spdk_thread_destroy().
Change-Id: I6586b9d22556b3874fb113ce5402c6b1f371786e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455319
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Rather than revert this patch, just modify the path to the common script
to enable it to pass in the test pool.
Change-Id: I33f5d89e1e118df4546f45237b55173ad30fad24
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455277
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will allow us to verify functionality between the nvmf target and
the vhost target and test extra code paths within the nvmf target
including multi-sgl stuff.
Change-Id: I3f5e9351c11ab896b75cd7bba7a69d95c1d031be
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451993
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
We do not need these lines in this script as it is meant
to run as standalone in a spawned VM.
Change-Id: I172227b6a7c6271d082f21677f13f2ce810fcfcf
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455092
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For UT there's no additional value in having more than 2 raid
devices, the value in having > 1 is in confirming the array
structures via create multiple and verify expected raids were
created.
Change-Id: I874b76644ccfc7d9dd307fbb179b35673b7bacc9
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454508
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
I'm testing the error paths within each function under test, this
was here simply because I copy-n-pasted much of the UT framework
from crypto to get it jump started.
Change-Id: Id7705bcaec87e93b589360e520b330f024d3293d
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452723
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Note that much of the vbdev module is still WIP including this
function (ex there are rc checks at the end when nobody yet sets
an rc) but I want to catch up on UT before adding more new code,
or at least get close.
Change-Id: I4617c215fed9fe35a68dcc5e7ebc93e48588cf5b
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452715
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Aas well as general test setup required for this one, additional
mocks, etc.
Had to add some asserts to make scan-build happy although I don't
see how these changes stimulated those failures.
Change-Id: Ief08f9b71ee7a836f6026d26517f5faa5f9d51ce
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451688
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Test multi vector command that needs to be split by strip and then
needs to be split further due to the capacity of child iovs.
Add a case that was not tested before. In this case, the length of the
rest of iovec array with an I/O boundary is the multiple of block size.
Expect the rest of iovec array to be submitted in the completion of
previous iovec array.
Change-Id: I5b95b1f1884a73b31709b2fd9187a8a9e9b2cd0b
Signed-off-by: lorneli <lorneli@163.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452414
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Nested lvolstores take a very long time to create,
since the initial unmap will get broken into
one unmap per cluster for the underlying lvol.
This test is working fine in the test pool, but they
have much smaller SSDs. My system has a 3.7TB SSD,
and this test times out.
So don't bother clearing the nested lvol store - this
saves unmap operations. We still have unmap operations
when deleting the nested lvol, so increase the cluster
size for the main lvolstore to 1GiB to reduce the total
number of unmap operations.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I29a254fff443e963cd620b55e78092d6a96f8ddd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453010
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Just name the malloc bdev explicitly. And since there
is only one bdev, remove all of the unnecessary loops.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie3b55161d6ebee64497bc9726edaa3fbf04bb445
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454690
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
1) remove unnecessary disconnect for cnode2 - this
subsystem doesn't exist (and the || true was
hiding the failure
2) remove || true from the cnode1 disconnect
3) remove extra spaces when assigning nvme_model -
maybe these spaces are OK on some versions of
bash, but when I run this locally this doesn't
work at all
4) remove trailing spaces from model returned by
identify data before comparison
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If3dd7ddc2ba44fc880e5b398b5fe0922b6637b80
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454689
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
A few test scripts were creating 128MB malloc bdevs
instead of 64MB - but there's no real reason for the
difference. So make them all the same. A future
patch will make all of these size variables common
instead of duplicated in each file.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I865ef08f384e026d0d3e7b064fb3a2d5958f054c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454688
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Adding the second bdev doesn't provide any real value since
it's the same kind of bdev.
While here, explicitly name the malloc bdev to simplify
the test some more.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ide6da901d4b90383cc73fa195b5a070a8eda0d01
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454687
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
1) specify malloc bdev name explicitly
2) just use a single loop variable
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7fb4fc28715f7303fc2b39de80985939ab469887
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454686
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a preparatory patch for specifying the transport
when calling the script. Better to use "rdma" across the
board instead of a mix of "rdma" and "RDMA".
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If7170cff6ba2ec51e92a0423c0b24cc141054b55
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454685
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
All of the checking for NVMF_FIRST_TARGET_IP, starting
the target, waiting on the target and modprobing
nvme-rdma is duplicated in every script. So move
a lot of this either to nvmftestinit() or a new
nvmfappstart() function in common.sh.
Also just kill the nvmf target in nvmftestfini, rather
than the script to explicitly kill it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5864404610a4244473f460d48264de92687ed867
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454678
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Pull this parameter when sourcing common.sh
and set a RUN_IN_ISOLATION flag if it was specified.
This reduces the overall code a bit plus avoids having to
pass the "iso" parameter to nvmftestinit and nvmftestfini.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idbbe27bfb7b62857500176cdb5d90e381fce4ffc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454814
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It's 3 functions that are only called from this compilation
unit.
Change-Id: I033ced4c19ee2a33b9537c347532ea5706d02d6a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454493
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previous test cases got passed, is because all parameters
are filtered to be same accidentally, for example:
Previous, they are
event=bdev_register:66ab4189
ev_type=bdev_register:66ab4189
ev_ctx=bdev_register:66ab4189
ex_ev_type='bdev_register:[[:alnum:]-]+'
ex_ev_ctx='bdev_register:[[:alnum:]-]+'
But actually they should be:
event=bdev_register:66ab4189
ev_type=bdev_register
ev_ctx=66ab4189
ex_ev_type='bdev_register'
ex_ev_ctx='[[:alnum:]-]+'
Change-Id: I7a2dc801931f792a39fc2775d883679cf8185fd0
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454442
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add uninstall target to makefiles to be able to perform
reverse of install target.
Fixes#464
This patch adds 'uninstall' target to makefile.
'make uninstall' will remove spdk_tgt app, headers, libraries
and shared libraries from system directories defined by $DESTDIR.
Additionaly, if there will be any empty directories left after
this operation, they will be removed as well.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I7b07fb4b81081d3914ff09165991fbe3a26b9067
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/431471
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently autotest prints the following at the start
of each run:
> grep: /[...]/output/timing.txt: No such file or directory
No harm is done and the file is created right after
the grep, but the message might be misleading. We get
rid of it now by ensuring the file always exists before
grepping it.
Change-Id: I271b68479a6fddcbe098c2657fd7c4dc39e6e50a
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454708
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Adding ability to create targets from single bdev,
will allow to create set of targets (not all) to run tests.
Idea is for bdevio to no longer run tests on all bdevs and
shutdown right after. Rather await RPC for configuring bdevs
then start test suite on select targets via RPC.
This is first patch in that direction.
Change-Id: I8645a3c22150e8611ff8a59f740e2ebf4edb4c1f
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454622
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tests shouldn't report success when no actual tests were ran.
Using bdevio without any bdevs configured, does not serve
any purpose and should report failure.
Change-Id: I489a0d03f5b5c2482dede56cad92befd97d24057
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454620
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Unclear why they were here to begin with.
Change-Id: Ic9b896796a9c56552972e3ef8075934d4b3f6497
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454515
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
No additional value in randomizing read vs write, which raid and
which channel. Still do read and write but fix the other values.
Change-Id: I5a4f023731119230d3eb49ae28421819144b90bc
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454509
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Having a varying QD in unit test isn't adding any value, the same
code is being executed N times with no specific assertions on the
difference between queue depths. Qdepth testing will be looked at
in system test as an opportunity to increase SW quality.
Change-Id: I5328a43f57cbfa2afc9145c828b6e968dcab310d
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454507
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For test setup only, each time a UT would run several params, like
the number of drives in the test, would be based on a random value
which is not optimal for UT. This patch just selects a reasonable
fixed values and uses them every time.
This can save up to 4 seconds per run depending on the values that
were randomly chosen (worst case) vs what is in this patch.
There is value in some read/write test cases in using different
strip sizes however. Enabling multiples values for the tests where
it adds value will come in following patches as will removal of
more random numbers like # of channels.
Change-Id: I1b9d44b70ae81af0dcf53ae4a56e31c9c9add39e
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454505
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
General cleanup, first in a series of patches coming soon...
Change-Id: Ibed727559af22c6febb1aad2bb8320a765814144
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454371
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch allows multiple iovecs as argument in spdk_dif_generate_stream.
Subsequent patches will support DIF strip and insert in SPDK NVMe-TCP
target based on the patch series.
Change-Id: I1f3d6c5b9f924bb52525e1611db403846d087563
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453756
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
As a subsequent effort, this patch changes the interface of
spdk_dif_generate_stream to accept SGL data buffer.
This patch allows only a single iove. The next patch will allow
multiple iovecs.
Change-Id: I56f901d73ca3b9da4b56c213ebafcd7706b1fef8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453755
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch allows multiple iovecs as argument of
spdk_dif_set_md_interleave_iovs.
Subsequent patches will support SGL data buffer in
spdk_dif_generate_stream too. UT code tests only
spdk_dif_set_md_interleave until then.
Change-Id: I7ac03a3c8f7bcd922af4f29b404ebf3acc4b89e5
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453736
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently iSCSI target have used a single contiguous data buffer
both for read and write I/O. Hence spdk_dif_set_md_interleave_iovs
accepts a single contiguous data buffer and its size as arguments.
On the other hand, NVMe-TCP target recently has changed to use
SGL data buffer instead.
DIF strip and insert will be supported in NVMe-TCP target next,
and updating spdk_dif_set_md_interleave_iovs to accept SGL data
buffer will be helpful.
This patch changes the interface of spdk_dif_set_md_interleave_iovs,
but allows only a single iovec. The next patch will allow multiple
iovecs.
Change-Id: I31b09814f8ec920e463a5b1be8fb88cad7d277fb
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453735
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is now sourced by each of the individual test scripts.
Change-Id: I0b4982a96455fcb376310658c1f2ad90a1232379
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454495
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Follow the pattern that most of the other tests follow by
defining testdir and rootdir at the top, then sourcing
the common files.
Change-Id: I8f4374e91f20edc244e8e8bcf8f9df198b4509c6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454380
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This wasn't used in the automated tests. It's probably only
for manual testing. For manual testing we're moving to a model
where the test script can run with just the 'iso' option, so
let's drop this parameter to simplify.
Change-Id: Iaafd237bcd4185844e568e79828824bdaf31a25d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454093
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These scripts aren't tests - they're just shortcuts to be used from
the command line to run tests. But we're moving to a model where
users can run individual tests directly by passing in the 'iso' flag,
so these aren't useful any longer.
Change-Id: I0789a4d267c6ab0e111a6b2f4ffd3b6ce21d9638
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454091
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This matches the pattern used in other tests.
Many of the tests use a COMMON_DIR defined up top.
Instead of changing where this points, because it's used
for multiple things, just change the places where it
is used to source common.sh. This is lower risk for now
until these are cleaned up later.
Change-Id: Ib38ea9fdc94118c6c406f86177bab21c4e1c98b4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453440
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
This patch changes UT so that bdev modules have async init.
It demonstrates issue with triggering assert in init path,
when bdev modules are reinitialized multiple times.
Change-Id: I9b2b16d8ac53bac6a929f6929ceedb70b250c500
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454618
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This change unifies the DIF library to use dif_sgl throughout.
Change-Id: I60addcf05e75b823e4dfb216122bf46edbc42e78
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454528
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The struct _iov_iter has been used to iterate the passed iovec array.
Subsequent patches will share the struct among iteration and
creation. To clarify this update, rename the struct _iov_iter to
_dif_sgl. The name sgl has been already adopted widely in SPDK.
Change-Id: Iab81bcb0658fbd0e39305e045c3d0aadba8fc55f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454525
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The new added API can load file content into a data buffer, which
can be used to read configuration file as well as JSON file, and
we can add WRITE API in future which can be used to implement the
persistent reservation feature.
Change-Id: I9aaca7571648e1ab6dbfdd7cfd6ca34083cbeec2
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453498
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
bc is currently used in iSCSI qos.sh test, but is not listed
as a pre-requisite in vm_setup.sh
Also it's a good alternative to using sed or awk for some
simple math operations.
Change-Id: I18742c0dedcdcc5eeebd310eb5760e226a163af7
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453998
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Instead of linking to the real sock library in the unit tests,
link to a mocked up version like we do with the env.
Change-Id: I9607f135c6af86e09fa52badf44897f90ce94521
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454492
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This test runs pretty quickly, so let's just enable
it per-patch.
While here, remove the commented aer test. We are
covering aer in other parts of SPDK autotest.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If0fb9814ed51c52dda58297c49266a7ad283dd85
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453908
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There are some QEMU bugs with resets for NVMe emulation.
It simply hasn't been tested for this test's very
stressful reset scenarios.
Since this test is failing the nightly builds fairly
regularly on VMs, just have this test print an
error message and exit 0 when it finds a QEMU SSD.
This will also allow us to enable this test per-patch
in a future patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1013f1d84ab4d0e13f713fe99352b011d77dd1f8
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454517
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add the unit test of the public function nvme_request_check_timeout().
Change-Id: I6b51cc3985b1dd306fa85f3aee2be847e90d8807
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453781
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This cuts off about 10 seconds from this test on my
system.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iec889b2c304c44c1e3f6b130900d1a9f4d0fc575
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453957
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This test intentionally generates lots of failed
requests - so disable logging for this test
application.
This should significantly reduce the number of
Jenkins java.io exceptions due to excessive logging
from this test.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I406e307575eeb82c103b7013b4feebfb2cf81864
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454082
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This makes sure we do some I/O after the reset.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5378df76fcd99ab9fed674550999c39d644069f5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453941
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will (finally) enable resets for fabrics
controllers.
Move some of the work previously done in enable_admin_queue
up to this new disconnect/connect logic.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6239f0c0f36192db921d33f2322b1874b9382a01
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453939
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The RDMA transport was the only one implementing this
function, and it only does a connect - not a disconnect
followed by a connect.
A later patch will add a matching disconnect function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib68eb0ff2f8e59f437d6d8831bb37dfddf83e9a4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453929
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
In working on a future patch to queue compress operations, I found
some corruptions in our mbuf pool stemming from an inconsistency
in using mbuf macros when constructing a compress operation and
how we allocated and freed both the pool and the mbufs.
This also fixes an issue that I hadn't addressed yet with freeing
chained mbufs. Use of the mbuf macro to free them instead of the
generic spdk functions takes care of that for us.
Change-Id: I7b29a0d740ab745574698c721d575d8a735ad5cb
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453028
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
On init, we pass reducelib the address of our params structure
so that the volume size is updated accordingly. On load however,
there was nothing to set the volume size so any load of a previously
created compress volume would result in a 0 length bdev.
Change-Id: I7643c79fa2e664115fd25df064ff1c74d82e358b
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452906
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We used to rely on lcore >= 0 for sessions that are
started (have their pollers running) and in order to
prevent data races, that lcore field had to be set from
the same thread that runs the pollers, directly after
registering/unregistering them. The lcore was always
set to spdk_env_get_current_core(), but we won't be able
to use an equivalent get_current_poll_group() function
after we switch to poll groups. We will have a poll group
object only inside spdk_vhost_session_send_event() that's
called from the DPDK rte_vhost thread.
In order to change the lcore field (or a poll group one)
from spdk_vhost_session_send_event(), we'll need a separate
field to maintain the started/stopped status that's only
going to be modified from the session's thread.
Change-Id: Idb09cae3c4715eebb20282aad203987b26be707b
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452394
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add the UT test case to cover below function:
spdk_iscsi_portal_grps_destroy()
Change-Id: I910b1066ff306039af8d4634122f894ffb3d66e1
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453499
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Replaced the unnamed unions with named ones. It makes the assignments
easier (it allows for direct assignment instead of having to choose the
correct union member).
Change-Id: I130233a096070092275a040e73cbaf36106ae1ab
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453682
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Most of our bash test scripts source autotest_common.sh
to be able to use some autotest-specific functions like
timing_enter(). The same test scripts allow specifying
custom command line parameters without actually realizing
that those parameters can be potentially picked up by
autotest_common.sh as well.
For example, if particular nvmf tests are run in "isolation"
mode by being executed with the first param set to "iso",
and there is a file named "iso" in the current dir, that
file will be sourced. This could be bad.
In this patch we stop sourcing or even processing $1 in
autotest_common.sh. Instead, the test configuration will
be sourced just once from autobuild.sh, autopackage.sh
and autotest.sh. If the user wants to run particular test
scripts manually, he should source an SPDK test configuration
by himself - manually as well. In most cases he won't even
have two, as only a few test scripts depend on SPDK_*
variables.
Note that we still have to setup the default values for
SPDK_* variables in autotest_common.sh because some of
our test scripts actually depend on them:
> if [ $SPDK_TEST_RBD -eq 1 ]; then ...
Because it lacks any type of quotes around SPDK_TEST_RBD,
it will print the following message when that variable
is unset:
> /bin/bash: line 0: [: -eq: unary operator expected
It doesn't trigger any error ($? == 0), but can be still
a bit misleading in the script output.
Change-Id: I350045d8582d66fe1ed7697d4bcbba324cb541ad
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453876
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Most of our test scripts source autotest_common.sh at the
very top of the file, and - since autotest_common.sh
enables xtraces inside - the first thing we'll see in test
output are likely xtraces from sourcing the configuration
file and setting up $config_params. Even a simplest test
script will produce a ton of output this way, making the
entire output unreadable. This is especially annoying when
the test script is run manually, so we get rid of it now.
All the SPDK autotest options and $config_params will be
printed elsewhere anyway.
Change-Id: I6d9c8e8ba261b632ffbb7d6d26d84eb7ccfb2ed8
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453875
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This way all the ./configure parameters are setup in one
place without any unrelated code in the middle.
Change-Id: I1cd8dc05e326b9ab3e8e51c193dd422fd8b5a00b
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453873
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We use that variable only inside autotest_common.sh so far,
but hopefully that's going to change now. Our tests still
hardcode /var/tmp/spdk.sock everywhere at the moment.
Change-Id: Iad862cb7674a8108d2a07f35b5298d21e009c5a1
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453872
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Put it all together at the top of the file so that
the file is less chaotic overall.
Change-Id: Ia92511e590692bbe31d0f626e9542374eaaab442
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453871
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK_RUN_ASAN was only effective on Linux so far,
even though libasan is available on BSD as well.
Let's fix that.
Change-Id: I58a1796f736616882f797313e22055122b050b57
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453870
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This way we can consistently track when xtrace in our
scripts is enabled or disabled.
> [...]
> xtrace_disable
> PREV_BASH_OPTS=ehxBE
> set +x
> xtrace_enable
> [...]
Change-Id: I2e813dc2a237a4620ea72d26a22a3c8cbeb269f9
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453248
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Factor out `set -x` and +x to separate functions. Changing
xtraces is not so trivial and we'll be improving it later
on. We can't factor out the code as is due to local variables,
so we already simplify it a bit in this patch.
Change-Id: Iecbf5cedf821b7b1b71da933ceb158761881a843
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453246
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We added this a long time back when debugging some
multi-process failures. This adds a lot of output
to the log which isn't helpful anymore.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4d46b744f30b32fddedc3dae32f40c077717a1bb
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453909
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Adds support to spdkcli.py for raid devices via UIRaidBdev with
functionality to construct and destroy raid bdevs.
Information regarding the raid can be viewed via 'show_details' on a
given pooled_device child in the tree.
Signed-off-by: Mike Carlin <mikefcarlin@protonmail.com>
Change-Id: I2ca89e641b201c09b3d4db070eac6cc0c2cdec73
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452774
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This test does resets which the nvme driver doesn't
really support yet for fabrics controllers. Some
recent patches accidentally broke resets for PCIe
controllers, and fixing that causes this test to
hang on fabrics controllers.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia5676130087a49555645b077f289bb40f6f27a43
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453916
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This reduces some repeated code. I could have made both paths
call spdk_thread_exit(), but I want to add some stronger checks
around the tls_thread there eventually that wouldn't be valid
in the other path.
Change-Id: I61e1484536d8aef05f120d9ed394312b41f8445a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453575
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Now that SPDK_TEST_* default to 0, we can decidedly say
that if the requested test suite can't be run on your
system due to unmet dependencies (e.g. missing system pkg),
you will get an error.
Previously we would silently disable that test - e.g. when
someone ran with SPDK_TEST_RBD=1 but had no librbd system pkg
on his system, the SPDK autotest would return success without
running any RBD tests. That was very counter-intuitive.
We still silently disable a lot of tests inside our particular
test scripts. Hopefully we'll stop doing that eventually.
Change-Id: Ib400ba772c095b4d65fa8893a0669f3d8c3984e6
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453712
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This tests a variety of bdev-related commands against
our NVMe-oF target. The key ones are write_zeroes
and nvme_passthrough which until now weren't being
tested at all.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id8a5cfb2e41c2a7e8fd940b61b43a80c39993f9a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452936
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
This paradigm has made it so much easier to test NVMe-oF locally. Extend
it to the iscsi tests as much as possible.
There are a few exceptions to the rule right now. Namely, the calsoft,
perf, pmem, and rpc tests which need to be slightly refactored before
they are ready for isolation running.
Change-Id: I3e92bd340c6a499dc77a56eb67bc7b074604746c
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453476
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Check whether ASAN is enabled up front, before entering the loop over all PCI devices.
Change-Id: Iede6a0466014745b77190b79fb8255e7b61bb260
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453512
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
I'm guessing this happened during a refactor a while back, just
noticed it while looking at something else. We create a PT bdev
on a malloc bdev that was never created.
Change-Id: Idda7448b908c184f31be3ac1dd076f1cdf3397ed
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452778
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
bdev_raid.sh was using configuration file (bdev.conf.in)
made for blockdev.sh. Changes in that config file affected
the raid tests.
Since the test actually only used two malloc devices as
raid bases, switching to RPC makes it simpler clearer
to understand what is used in tests. Additionally
making raid tests standalone from blockdev.sh.
Fixes issue #777
Change-Id: Ia4c5858852241a9fd8212690aefbf015c98d1b57
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453644
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Previously the socket was only used in single rpc call,
upcoming patch will use of the $rpc_py.
Moving socket to $rpc_py simplifies calling it in multiple
parts of the script.
Change-Id: Id1ba86740237c32a6f0259562c0b5c11d917bbcf
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453643
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
We use python3 now, not python. This is important
because in next patch we will use a new 'aliases'
keyword argument in the argparse API that's only
available in Python 3.
While here, clean up some documentation that was
instructing users to call python explicitly instead
of just invoking scripts/rpc.py directly.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0c11e131cd56f7c994aa8fe21b4b00ae33489fdd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453460
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
We've got a bunch of `if hash` checks that generate
unnecessary output, e.g.:
$ if ! hash ceph; then [...]
/var/jenkins/workspace/Other_systems/centos7_autotest/
spdk/test/common/autotest_common.sh: line 28: hash: ceph: not found
We now silence that output in cases where we do expect
the binary to be unavailable and handle that case, but
we hold off in cases where `if hash` is just a sanity
check (e.g. `hash sgdisk` in part_dev_by_gpt() which
can make the entire function return immediately and do
nothing).
Change-Id: I7cbfada858aa86d57cbe182ea7f9b222debc8b88
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453207
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This transport function is a complete nop now, so
remove it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5cc6ac75795a3cf5311f24e2ac293fb53d4b9f8c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453487
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will allow us to move more of the reset-related
functionality to the common layer, as part of enabling
resets for fabrics controllers.
The transport qpair_enable and qpair_fail functions
acted similarly - so those are both removed now and
replaced with this new qpair_abort_reqs function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9486630ad5b807239b0b5bcde50e8cfd313695d3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453486
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The nvme_qpair_disable functions will be going away in
an upcoming patch, so move this one bit of functionality
into a helper function in advance.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I61c2de535c2230b988d56dea13b00f39cb59dcfa
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453483
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We submit AERs to all controllers - both pcie and
fabrics. But currently we only manually abort the
aers when disabling the qpair for pcie. Make this
common instead by creating a new transport function
for aborting aers.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1e926b61b8035488cdc6e8cb4336b373732f985e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453482
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This better explains what the function is doing,
and makes the name more general so we can use it
for the adminq as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6b55761cb141a9a79cdef876be47995d8813b312
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453480
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This way we can track which machine runs OCF tests.
Change-Id: I51ad8f467965ae7051caac06b834a9db9f0b1a8d
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453542
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This argument appears to be unused. I think it is a holdover from pre
dpdk submodule days.
Change-Id: I1f2084429dd9350730d7628af39db0b43dfdbd85
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453473
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
And change type name of callback as well. The new name is more accurate.
Change-Id: I13b63f7d33f60ecea7fdf6e50f57aa6a391a4562
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453151
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
NVMe-oF target doesn't support reset yet - but we want
to use bdevio to test other NVMe-oF target functionality
in the next patch.
An issue will be filed against the reset support so
that it gets added.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I84b2be9268a344ee9e613a39487345dc1b8187bf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452935
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This ensures the stub gets killed so that we can
make forward progress on collecting a backtrace.
This requires adding an optional parameter to the
kill_stub function to specify a signal.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib46d07b6651c6f35382f38c97901def03f28289d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452891
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This will be used to help debug some intermittent
json_config test failures in the test pool.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibe16f45c8916f726f0dd7aa3dc864543ed015aa9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452475
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This reduces the number of directories significantly.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2bb428962e1666bd3cee20fb566c7eb81195363a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452934
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
1) nmic is a target test - move it out of the host
section
2) don't reset trap until after all tests have run
3) while here, move all of the target-related test
together, followed by the host tests
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I73b3c0a8ace0ad65311ab7bb29b6cb08188e3aba
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452933
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This sends a known invalid opcode. This is useful
for NVMe-oF target testing, since the target will
decode READ and WRITE opcodes and we want to exercise
its passthrough code path.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I82e16955f4965224e51c1617dbb2b9e5cc48f36d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452932
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This uses the bdev nvme passthrough API to do a write
followed by a read, checking for final data integrity.
It helps verify the passthrough API is working correctly.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I25fe685b0bdcb88c7537c165cc60f8df31823b24
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452931
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
May not be the long pole in the tent right now but it is 11 secs
to make sure our example app is working, it adds no nvme coverage
so move it to nightly instead of per patch.
Change-Id: I779a9f2a6951b3c51a82403c8cf085a251fb955c
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452801
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
By default most of the tests are enabled, if we want to
run only tests that interests us, we need to disable each flag
separatly.
Build SPDK without additional dependencies and exit autotest.sh
early if no test configuration file is provided.
Change-Id: Id4752689479d9325242364c39c89d1236bab0344
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/443762
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
iSCSI is currently being adapted to SPDK's new threading model,
and this parameter doesn't make sense anymore. Remove it for
now until something functionally equivalent is added later.
Change-Id: Ia0e2f5aa81b72d99467c5a900619fbeeb42b2069
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452779
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This should cover all of the cases that we want to
changes for now - where it was doing an unnecessarily
loop over just one malloc bdev.
A few cases remain, but I'm planning to strengthen
those tests with more bdevs.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I16f9e82b4a551bcf1f491fc506e11c0ee98b60d9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452917
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We only create one namespace, so this can be simpler. We
can also just specify the name of the malloc bdev explicitly.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I04141cb8013605f9c54777147852a53d22ae68cf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452809
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Currently bdevperf isn't specifying a core mask, meaning it
will conflict with the nvmf_tgt running on cores 0-3. So
specify a core mask, and actually a different one for each
test. An upcoming patch will then run these bdevperf
instances in parallel to speed up execution.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I70cf4321d3005dda0ff63a96cef226b0329f778e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452807
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We need to wait for the aer application to be ready
to handle an AER completion - so instead of blindly
waiting for 5 seconds, instead wait for the aer
application to touch a file indicating it's ready
to receive an AER event. On my system, this took about
1 second.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic18fabb5ba637ef1f4097930423f897c76bba299
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452806
Reviewed-by: Mike Carlin <mikefcarlin@protonmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
get_lvs_free_mb only takes a UUID argument, not
a friendly name. So revert that part of the changes
to this script made previously.
Also fix ordering of nested lvolstore and lvol names.
This fixes last night's nightly test failures for
nvmf.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I408ed787b6ff43314dd432c9fa7d9f5882c3d071
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453007
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Tests can specify this new -t flag to tell aer to
touch the specified file after its ready to receive
an AER.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I08cb584d487769d49a9345587c53529d7c02c528
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452804
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
They were removed from the trace API and BlobFS doesn't
compile right now.
Change-Id: Ie98339f19353e4db901af551c706f57c18b89fc5
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452863
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The product_name for raid bdevs was "Pooled Device" which was a legacy
naming convention that hadn't been cleaned up yet. This changes the
naming to be up to date with the current naming scheme.
Signed-off-by: Mike Carlin <mikefcarlin@protonmail.com>
Change-Id: I9092a2b793e48bb9ec0349087a31fdcde17ed9cd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452269
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove SpdkFinalizeThread. It is no longer needed - the
thread-local destructor handles the cleanup.
Keep SpdkInitializeThread but make it static. We still
need this function for the main thread, so that it can
be explicitly called after the filesystem has been
loaded.
Part of this patch moves the rocksdb_commit_id to a
version that doesn't make calls to these functions.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib9aefdfede7e5636085079d2226ec1c4d2cae406
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452687
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This will help collect evidence for the intermittent
RocksDB failures seen in the test pool.
The method for getting the name of the /dev/shm trace
file is pretty kludgy (grepping the log) but it's the
best I could come up with and is very simple. Good
enough for now.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7b3acbcb54033555ff42b3b21a09c798a87c481b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452263
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This leverages a new feature in rpc.py for piping a
large number of commands at once. This will cut down
the amount of time it takes to run the affected tests.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ieddf5dcc9cb6132dff96c90db4ed97e67c328f56
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452773
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
We don't need to use the UUIDs for lvolstores and
lvols in the nightly test - just use the names that
we've specified.
Also remove the bdev loops - there's only one namespace
per subsystem.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I684b72ca4472009dd8bc49f5221a7937769f1ab8
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452772
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
We only create one namespace so there's no need for
a loop.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7b37792e5ea0ee7d48853ca05882d566dd6ac5e0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452771
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Currently it blindly waits 5 seconds to make sure bdevperf
has started I/O - and it does this for two different tests.
Improve that by using the get_bdevs_iostat RPC to check when
I/O start occurring.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If7bc773ab65d23f69524d3a42123be090f3b4eac
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452753
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This was not used by any of the trace register descriptions.
Let's remove it rather keeping it around if we don't need it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idda809e2911db5be555ff6aa13695484a14bf665
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
FTL doesn't have any kind of special package requirements.
It is getting pretty good traction in the community, so
let's enable it by default.
Note that we will disable FTL on FreeBSD. FTL uses
CIRCLEQ which is not available on FreeBSD. Let's not
spend time trying to get FTL to work on FreeBSD until
there's a demand to do so.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I15525b6c4e6ee52f49adf74d55f9484fe08a6dcc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452752
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This function is in charge of scheduling new connections
onto cores. It used to be used to dynamically migrate
connections, but we no longer do that.
Change-Id: I2fa04a7dfb43bf9fae7902376ba5ba6d18744469
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452727
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This file contains manual tests, so make the name
reflect that.
Change-Id: I49b494b097dda30f1d6e134b86d6c43ef6ec11b1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452265
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Beginning to shift the test script model to match the other
tests in SPDK.
Change-Id: Ica146fd7d66de904ad7a9b774eca13bf0510c297
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452264
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
During connect call based on queue type (AQ or IOQ), SQ size should be
validated against max sq size for that particular queue type.
Change-Id: I977d7556e4d04e37004d16c87efffd3b467fa62c
Signed-off-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452376
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Case 602 was run but not listed in usage, so add it.
Change-Id: I03d95d4452e1fec07ca90eee59a97bb1ef91799b
Signed-off-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451840
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add the KATO==0 uint test of keep alive feature.
1, If subsystem == nvme && KATO == 0, it means initiator don't want
to enable keep alive feature, the keep_alive_poller would not be registered.
2, If subsystem == discovery, KATO must be 0.
Change-Id: I212b344e235e94d5f34168d43d45766283773446
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451819
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
RAID tests are skipped when the OS is not Linux or if nbd isn't available.
Change-Id: I141a01603f849d38a1772686a0747beb08f7c265
Signed-off-by: WangHaiLiang <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451723
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For now, just do events for open, close and start/end
for writing the length xattr. These will be useful for
debugging the intermittent RocksDB failures.
Note these events may only be recorded on the polling
SPDK thread. SPDK events cannot be recorded on
non-SPDK threads (i.e. RocksDB user or background threads).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I72fb302db23b399f583f56194c237340587f3027
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452262
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
When debugging issues or running local tests, it is
nice to skip rebuilding all of the db_bench tool or
running mkfs on the underlying SPDK device. So add
SKIP_GIT_CLEAN and SKIP_MKFS checks which allow the
test caller to skip these steps.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4d3f739aaa908a816aacf89d3fed0985493b7f59
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452261
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This makes the test script easier to use outside of
the test pool, since it will just reuse the rocksdb
results directory rather than failing because the
directory already exists.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I754489c3321323bce8c8a5c352d4947d6270d489
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452260
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This requires changing arg1_is_ptr to arg1_type.
We will use this to print the first 8 characters of
a blobfs filename when collecting event trace data.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1b321d99145e82b42dcf6d901ce9d6298158edae
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452259
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch verifies that functionality of only releasing cluster
that was originaly claimed in race thread condition.
Change-Id: I4d60ffdb4fd6612d61a761835aae2fd1bf81b7fd
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452626
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
They have a lot of intermittent failures caused by the
test itself, not SPDK QoS. The actual bdev throughput
on our CI is roughly the same as the QoS limit in that
test, so the bdev can often fail the case where it's
expected to achieve more than the original QoS limit
after the limit is disabled.
Eventually this test will be replaced by a different
one, without any iscsi involved.
Change-Id: Ic71537b1c33376dda132e07210a34cae9bd073cc
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452424
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Simplify the test to only run on the RAID volume, but then
also perform several operations on the logical volume while
I/O is occurring in the background. This would have caught
several recently filed bugs.
Change-Id: If937a118ea034ce08d95b70fe74dc5f445cb1008
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452150
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was still pointing at the wrong place.
Change-Id: I793030432e9b4e7a4c284aa6c47273e9434cd4dc
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452245
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This script is not general purpose like gen_nvme.sh,
so move it to the test directory at least for now.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I22df9375a8fcd585884523f22dae8ba9354768d3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451785
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Nvme latency tests
IOPS vs. Latency at different queue depths
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Change-Id: I1192a18fa05f36c74385d286e86db571d52b9224
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/424063
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We are switching to a method where we clone the db bench dir in
each build before running tests.
Also update the commit ID to point at the proper place.
Change-Id: I0eeba7bf7118e7da367b1405ae7322668eea3221
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451984
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This test is causing intermittent failures on the test pool.
Change-Id: I6be745700ee34813d49800acf689dc35d6c88ef4
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451998
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Run given fio config in loop X times. We use that later
to calculate the average of runs.
Previously the loop was done in CI but it's better to do
this in script.
Change-Id: Ie4126f504b2c027a1d6b4b4520152e89aadb4794
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450946
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We use JSON configuration test already configure every subsystem so we
piggyback notifications testing here to not duplicate work.
Change-Id: Ib1334951fba60de390e6b40f653cf9cc1d32c144
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445337
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change-Id: I7a7667e1c4e6321150e5bc8eb4287fb61847ccb5
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450174
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Block operation that should not be done simultaneously.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I3cab510377a49be4e5847ba37a6218f0025c0db6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450014
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently, if the Bdev subsystem initialization fails, the initialization failed
module does not call the fini function cleanup resource.
However, null module use the 'spdk_io_device_register' and spdk_zmalloc to request
resources. In failed path, it will cause resource leak when exiting the app.
To avoid this, it will cleanup resources when module initialization fails.
Change-Id: Ib1a89e5238252d69b6e64ea02a0bd826661349a5
Signed-off-by: Tianyu Yang <yangtianyu2@huawei.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450105
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch won't fix issues related to the need for the latest
ipsec with 19.02 but it is needed for that patch to pass.
Change-Id: I8e2d984d85b355d88edfb9c90c159c8aa0a5362d
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451788
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Extended the IO descriptors with the ability to group them together in a
parent / child(-ren) relationship. It allows to delay parent completion
until all children are done and enables the children to have additional
context in their completion routines (as opposed to having a single IO
describe all requests).
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I6ad111dc231813e397697109a333e2a5d7f5941d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449068
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We were setting this value in the target from our initiator, but it
turns out the rdma_conn_params struct is responsible for setting the
opposite side so we need to add it in the target side when accepting
connections.
Also, add a test to demonstrate target functionality when we overwhelm
the SRQ. It is useful to note that performance really tanks when you
start overwhelming the srq so it may be useful to use this test case to
check performance gains in edge cases over time.
Change-Id: Iac541bd9fc1d82eca9f21e7abc3f625663a6c460
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451678
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will allow us to test a greater number of connections without
having to add more subsystems when doing NVMe-oF testing.
Change-Id: I33203d6db79b30abb065f098c16840096478c5de
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451677
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This signals which RocksDB commit should be checked
out for the SPDK RocksDB tests.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1ba0be00747a2642b359b1e0e0c8c2c6d99cc4f1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451772
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Allow users to optionally specify an affinity mask when
creating a thread. This isn't currently used, but we want
the API to be in its final form for the next release.
Change-Id: I7bd05e921ece6d8d5f61775bd14286f6a58f267f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451683
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Bdev descriptors could be closed only from the same thread
that opened them. This restriction was suddenly introduced
at one point without making sure all the SPDK code respects
it. Vhost can still close descriptors from any arbitrary
thread and fixing that would require some more effort.
With this patch we remove the thread-specific assert from
spdk_bdev_close() and hence allow vhost to work properly
in debug builds. Vhost can still have a possible data
race with bdev hotremove notification, but let's get rid
of the abort() from the usual code path first.
Change-Id: I6fac66a5ebc907b1c5418fff618f0b64cd9b69f4
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451561
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We used to wait only for those descriptors which
specified the hotremove notification callback. The
bdev could've been removed before the descriptor
was closed and the subsequent spdk_bdev_close would
simply segfault.
This patch modifies spdk_bdev_unregister to always
wait for all descriptors to be closed before actually
unregistering the bdev. This consolidates the bdev
unregister behavior for descriptors with and without
the hotremove callback.
Change-Id: I9b358209c6abd301b6fe8660e27bc6fa4ef485d6
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450175
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now Host can get an asynchronous event notification when
registrants were unregistered/preempted or reservation was
released from the associate namespace, Host can send
get log page to clear related log pages and reservation
report to get the full overview of current reservation
configuration.
Change-Id: Idc57c19812490c7536503308989871515e9f2361
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/439935
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is the end of the patch series. After this patch,
delete_target_node RPC will wait for the completion of
removal of the SCSI device and then free the iSCSI target.
SCSI device holds passed callback and calls it in free_dev().
free_dev() is ensured to be called after all iSCSI sessions
are closed. So iSCSI target resource can be freed safely
after that.
Change-Id: I25921b4014207092b7b3845dfeae58bcdffa2edc
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450607
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This commit adds functionality for installing most of the packages,
which were previously installed for Fedora only,
for Ubuntu as well
Some packages are not going to be installed by the script:
For ubuntu 16
* libpmempool
* open-isns-utils
* perl-open
For ubuntu 18
* perl-open
Remaining packages deserve their own patches since they are not so easy to
install on Ubuntu
Change-Id: Ic5b744193ff4df46ab4e4fb3783e0515ccdbfecb
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/425388
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The next patch will add the function ponter typedef
spdk_scsi_dev_destruct_cb for SCSI device destruction.
Hence add lun to the names of descriptors and callback for SCSI
LUN for clarification.
This patch doesn't change any behavior.
Change-Id: I73f2bce9129f7a6f16770ab6ed18428b16589108
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450883
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
When any iSCSI target is destructed, if the target exits all corresponding
connections first, destructing SCSI device will be easier.
Hence, iscsi_tgt_node_destruct() starts exiting all corresponding
connections. Then it destructs SCSI device immediately if no active
active connections, or waits for the completion if there is any
active connection for the target.
Change-Id: Ibd4a29789faecfefccefa1153a519c43d040a00d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450737
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Disabled temporarily earlier to get to basic functionality, circling
back now to begin work on UT again.
Change-Id: Ie7606f91072257f392727bdecc5f1eac26380453
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451063
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This was not being properly set in the multi-sgl path.
Also add a verification step to the fio configuration file to prevent
against future regressions.
Change-Id: I510b6acd92bc2fbc9b6fbec1d59945cc53584ad3
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450305
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A host can use the Asynchronous Event Command to be notified of
the presense of one or more avaiable reservation notification
log pages. A reservation notificaton log page should be created
whenever an unmasked reservation notification occurs.
Change-Id: I8b83e5319725286dd0a5efc1b22d8ac4673e31e1
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/439931
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add the flag destructed to struct spdk_iscsi_tgt_node and
iscsi_op_login_check_target() refers it and returns
ISCSI_LOGIN_TARGET_REMOVED if it is true.
When destructing iSCSI target node, it will be nice if iSCSI library
can stop further connections are created but, connections are not
associated with any target node until processing login. Hence stop
creating sessions instead.
Additionally, when destructing iSCSI target node, if the flag destructed
is already set, return immediately, and the flag destructed does not
affect discovery session.
Change-Id: Ic73bdd93f2ca7d5ca1d2f897d5046cbc51650d5f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450881
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These change will be used in the next patch.
Change-Id: Ifdb4ccf20049b46e850122a4021cbbe7441e1270
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450736
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A termination signal was being sent, but we didn't
wait for the spdk app to actually exit. This was
actually causing an intermittent failure on our CI,
as the application could exit during our setup.sh
cleanup call, giving the following error:
```
Removing: /dev/shm/iscsi_trace.pid284533
rm: cannot remove '/dev/shm/iscsi_trace.pid284533': No
such file or directory
```
Change-Id: Ic6ff0130b6264fa506c367d589853e5f3132c1d2
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450032
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is a preparation to add completion callback to the
destroy_raid_bdev RPC.
Newly added callback parameters are passed to spdk_bdev_unregister()
in the end. This patch adds just parameters and the next patch will
utilize them.
Change-Id: Ic239c55872c0c69f3d1625eaccdb91a32a9d4d30
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450572
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Configuration lists in RAID bdev are unlikely to be exposed outside
of the RAID bdev module. Hence simply the prefix g_ will be enough
to clarify they are global data structure in RAID bdev module.
Change-Id: I9df88db8fa651d5af7d771d88ff04bb5997079c9
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450563
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
vmsetup invokes pkgdep.sh with -i flags, but that flag is not supported.
This patch changes the call to just `pkgdep.sh`.
Change-Id: I1eb92b9ddfce1ea2d7ef450fd795f8f93fb198ec
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450260
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
We didn't call teardown_test() in "unregister_and_close"
test case, causing the subsequent test case to fail
to register the same io_channel. This didn't cause any
issues, as spdk_io_device_register() silently returned
if the same io_device was already registered. However,
there was an extra error message printed and this patch
gets rid of it.
```
Test: unregister_and_close ...passed
Test: basic_qos ...thread.c: 850:spdk_io_device_register: *ERROR*:
io_device 0x55555576e4e0 already registered (old:0x555555770ab0
new:0x55555d7a14d0)
passed
```
Change-Id: Ib554612df8985c9d99b46b71bb76020f52565362
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450111
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: I683ea366da7bb186f16a8084a9c43276ed4fce04
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449798
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Enhance RPC method start_nbd_disk to take nbd_device as
one optional parameter. If it is not assigned, automaticly
choose an available nbd device path from /dev/nbd0 to
/dev/nbdN.
For github issue #324:
https://github.com/spdk/spdk/issues/324
Change-Id: I72c064d8bd476df342f5aa0af4d6120eb021c7ed
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/440453
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This API had good intentions, but as more complicated
use cases came up where base bdevs could come and go,
we've realized that the bdev layer will need another
mechanism to query bdev modules on these types of
relationships between a virtual bdev and its base
bdevs. We removed all code related to tracking
the array of base bdevs a long time ago.
Change all existing callers to use spdk_bdev_register.
Document spdk_vbdev_register as deprecated for now,
and change its implementation to just call
spdk_bdev_register for simplicity sake.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3b40ed96480c0fa7184db42953a9f4e4c167fed1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450076
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
LUN ID is not converted from integer to structure and integer is
set to R2T PDUs.
Popular iSCSI initiators don't check this value and work correctly.
This patch uses the public helper function of the SCSI library
to fix the issue.
Additionally, private helper function to convert structure to
integer for LUN ID is replaced to the public helper function
of the SCSI library.
Change-Id: I9218c5ef7a8bfec43326c6584db7c6929fdd11a8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449963
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK iSCSI target didn't convert LUN ID from integer to structure
when it sends R2T PDUs. The next patch will fix the issue. Introducing
helper functions into SCSI library and using them will be clean. Hence
this patch adds two helper functions to convert LUN ID between structure
and integer.
The logic of helper functions is derived simply from the current
implementation in SPDK.
Change-Id: I114b546cfcb44109d6cd131a1fa972f4d6bfea38
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449962
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Looks like a leftover from hotplug test when it was
done using a NVMe bdev instead of malloc.
Change-Id: Ia71d167b403d7f6d8ee5a621653f4062fce4ba6a
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450035
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Not sure how it ended up this way, but there are a bunch of
extra # symbols that make the header look really weird.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3ecf04c7a97b0cb22fdb2bf5dbc4b64ca554704b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449936
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The buffers are really specific to the request and not the wr or data
object. In the case of multiple wr requests, the maximum number of
buffers per req is equal to the number of SGEs in the NVMe-oF request
*2.
Change-Id: Ic59498bfed461d180adb2fb9a481ac5b11fa9252
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449108
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
FIO is going to always present a contiguous buffer to us. But we can
fake out the nvme driver with a couple of global variables.
Change-Id: I038e70582043e1d7c1800ed065fe126aa091c290
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/439608
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Enable parsing an nvmf request that contains an inline
nvme_sgl_last_segment_descriptor element. This is the next step
towards NVMe-oF SGL support in the NVMe-oF target.
Change-Id: Ia2f1f7054e0de8a9e2bfe4dabe6af4085e3f12c4
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/428745
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In the next step, this won't be a channel at all.
Change-Id: Ia8fe4da5b0b283e8dfc5c6477b84cfdd346d89a0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449464
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Rely on the available threading abstractions to make this
a bit simpler.
Change-Id: If8f028092c057637ff167d2ec7faa3dce009af61
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449463
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The unit tests to this point used an algorithm that
just copied the data as-is with no compression.
Change it now to use the actual unit test compression
algorithm.
A few unit tests need to be modified to account
for the compressible buffers - primarily those that
write a single 512 byte LBA in a 16KB chunk. These
will now be compressed down to a single I/O unit,
so some of the asserts need to be changed to adjust
for this.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I11b2c92b1d6f710a301c8a3b0961f76c9f4886d4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449567
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This test verifies that all of the io_unit_index[] entries
are written. For that to really happen, the write for
the chunks must not be compressible. Currently the compress
algorithm just copies the data and doesn't actually
compress - so writing a partial chunk works OK for this test.
But upcoming patches will add a 'real' compression unit test
algorithm - at which point, writing just part of a chunk
will be compressible since the non-written parts will be all
zero.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib48b9bb5a782571689b281a955e01682e21ee223
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449566
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This just moves code to prepare for these functions
to be used earlier in the file without adding
extra function declarations.
Move ut_build_data_buffer as well for similar
reasons.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifd4fb4abbd43aaa01fca3b73bbfd847ffdd4d6f7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449512
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This function can be used to create data buffers
with varying levels of compression - we'll use
this in upcoming patches to test how lib/reduce
actually handles compressed buffers.
Modify the unit tests for the compression algorithm
to use this new function as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib065898a228c405b201092b718c2f0b920104129
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449500
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Test functions to be added later in series
Change-Id: I96286b6214b4577df334d180e7c3d641e8ce8f68
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445371
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
lvol should not only be freed but also removed
from lvols list when deletion fails.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I3a047e1cc611e71b1544ca77c256a879dd2efdae
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446619
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Misc cleanup from earlier patches, some naming issues and other
minor things that are needed before adding UT.
Change-Id: Ic76f0e2fd12e48782b048fb8785902b1098cf352
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436227
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is starting point for metadata refactor
which is needed for efficient ANM events support.
Change-Id: I81d864605e69008d8e3922fb61adf504187447a1
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449328
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Recent change of ceph_raw.img size from 10G to 4G breaks
tests on patches which are not rebased or which use
previous SPKD releases.
Change-Id: I9dd79756e3cc7949593cd1c16d4735542d1fb32d
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449469
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Make use of --clear-method for lvol store and lvol bdevs.
Lvols will not perform unmaps in this test.
Previously precoditioning in script was only allowed for lvol
bdevs, NVMe precond had to be done outside script.
Changing this to allow both bdev types to be preconditioned
as part of the script.
Change-Id: Ibcb4f2a084aaa60885d3e9e9c8a4f518c8ad2477
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448978
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
1,add a judgement to ensure spdk_blob_close() runs correctly.
2,make sure the command has been completed before _spdk_bs_free()
which would avoid heap-use-after-free.
Change-Id: I698521d8d4d8e1d8a7374665d27d6eec6d0b85f5
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449517
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
iSCSI library had used the prefix spdk_ for most functions regardless
of private or public. Using the prefix spdk_ only for public functions
will be helpful to distinguish private and public functions, and
will be helpful to investigate issues or do further improvement.
Besides in iscsi.c static variable spdk_arc4random_initialized had
the prefix spdk_, and change it to g_arc4random_initialized according
to the SPDK's good practice.
iSCSI library still have some issues but is more stable than before
and now will be the good time to adjust the naming rule to other
libraries.
This patch doesn't change any behavior.
Change-Id: Ia0b8585a7ce6662cabc0e6f57b7ccb8a40342297
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449396
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch adds library that will provide ability to notify about
events. On one side each spdk library can specify what kind of
notification it can produce and on the other side libraries can fetch
those notifications.
Example is bdev module, which lib notify about added or removed bdev.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Change-Id: Ia95e564a8a43400b2745d9de8217b9cc84cd1b16
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/431920
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added internal retry IO queue. In case ENOMEM from
nvme layer request is put to retry queue. When some
inflight operations are completed try to make progress
on IOs in retry queue in first place.
Change-Id: Ie9d3d20bd34431ee57f9454f242b0cdca349c804
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448461
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The unit tests don't really try to compress anything
yet, but this at least gets the pipeline in place.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic413850b30e4d9631f3ece2bab40d9026225e5b2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449097
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Clear the metadata before using it to avoid valgrind's uninitialized
value warnings.
Change-Id: I1ffd7f50239bace7700d7620b761d1de49942af7
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449158
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Just use the new _reduce_vol_get_chunk_map function from
reduce.c instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I90e9b05226155d0e8d5e74322b02c669de9204df
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449077
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is a really dumb algorithm but is simple to understand
for unit testing purposes. It counts the number of consecutive
bytes with the same value, and then stores the number of bytes
with that value, and the byte value itself. For example:
0xA1 0xA1 0xA2 0xA3 0xA3 0xA3 0xA3 0xA3 0xA3
would be compressed to:
0x02 0xA1 0x01 0xA2 0x06 0xA3
This will make it easy to generate specific data sequences
that compress to specific sizes to validate the different
compression paths through the reduce library.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0d48f98c080b9cdacb25433f53f44df7ada78c0a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449072
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Extend existing get_ocf_bdevs call to make it easier
to get information about attached cores.
Implementation is based adding additional optional argument "name"
to existing call. Based on "name" bdevs are filtered.
Backward compatability of RPC interface is preserved.
This patch also adds tests for the case when name is given.
Change-Id: I4300ebe37e936bc5cca8e066b5f09db462a87cf7
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/444841
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
scripts/fio.py and test/nvmf/fio/nvmf_fio.py are almost exact
same script. This commit unifies two files into one.
Change-Id: If753baaeb9f92dad2cda27bb4bed78ade4827d0b
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448656
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added a check whether to enable the QoS testing on iSCSI considering
VM or host has different performance data.
Change-Id: Iaf906ded70c3075fb3306e2301d638d613ec74dd
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447133
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Write operations are not in-place, meaning that once it
is completed, it's chunk and backing io units are freed.
Reads in progress to these backing io units, from other
I/O to the same chunk, could cause data corruption.
Simultaneous writes to the same chunk can cause similar
issues.
There are cases where we can relax this in the future -
for example, overlapped reads to the same chunk poses
no problems. We'll leave that as a future exercise.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3a4d9e8e3ab920f823084cd1bae91f179a4386ff
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448333
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In some upcoming unit tests, we will need to test
overlapped I/O operations, so add a facility in the
reduce unit tests to allow for that.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia9c6a3af3db104999f5d01e1115b0f1d164cef22
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448329
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This sets up for future patches to allow these I/O to be
completely asynchronously for testing some upcoming overlapped
I/O related features.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I058c2f324df532f792c96012a3c4351563361716
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448328
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
120 seconds is too long for controllers which can't be
setup during initialization, because this value is only
used for Admin commands so also rename as it is.
Change-Id: I0a3d3192252c0f6fc0bef4d8b868eaef2ae40fe3
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448601
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently the scripts deletes also files located
in ocf submoudle named core.py. This patch adds regex to avoid that.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I97a21c4860cb54f37f28641dc9cd47adcf2fd939
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448519
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
An example namespace usage model is added to cover most common
reservation scenarios.
Change-Id: Ic94f30815f0b2fc0b3cbe21dc7c6d79fb8c9f978
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436942
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is third party code which no need to run with asan enabled.
Change-Id: Id6f20f5e280e2b2ef67f83bac710133271d84aa8
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448597
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The phys_addr param in spdk_*malloc() is about to be
deprecated, so use a separate spdk_vtophys() call to
retrieve physical addresses.
This patch also adds error checks against SPDK_VTOPHYS_ERROR.
The error handling paths are already there to account for
spdk_*malloc() failures themselves, so reuse them in case
of vtophys failures.
Change-Id: I377636e66b8c570d013c1bb2021f04bce4e6c0ce
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/416998
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This callback type takes 1 argument instead of 2.
Change-Id: Ic3710fafb2828f08fc064f7658849b3d20521092
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446997
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
For NVMe devices, in conjunction with the new batching options,
it can be advantageous to artificially delay between polling
for completions. Add an option to slow this rate down.
Change-Id: I0fc92709ff45ead0beb388dda60694bf1ed8b258
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447716
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Discovered in bdev compression test. Vol load was using the index
of the logical map to set the allocated chunk map bits as well as
retrieve the chunk. Exposed with overwrite situations. Also clarrified
one var name that I missed in previous patch.
Also added UT that fails without the fix, passes with the fix.
Change-Id: I776a5af9364cc3d4e8b7dafec22acf23bd463630
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447969
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Ftl tests won't pass with fio_plugin when asan is enabled.
Change-Id: I6f07f661c19ecab302e291bbd76a7aad964000c7
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447318
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This package is needed in vm_setup.sh for vpp,
without this will report "rpmbuild: command not found".
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Ic00a55addc940e359aae17b45e58b9a736b08fd3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447282
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This test allocates ridiculous amounts of memory for certain
random seeds. This test doesn't benefit from the extra queue
depth, or the larger I/O sizes, so just pick more reasonable
numbers that suffice for this unit test.
Some of the failing seeds in the test pool resulted in >30GB
of total memory allocated, according to valgrind.
Eventually we need to remove the randomness from all of the unit
tests, but at least this gets us past this intermittent failure.
Fixes issue #692.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia882fda8ef449c8537f76c878008aaf469ae7bd7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448193
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
rte_vhost has rejected a patch with this feature, so
we implement it using the external rte_vhost msg handling
hooks directly in SPDK.
Change-Id: Ib072fc19b921fe0fa01c7f4892e60430232e3a1c
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447025
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This wasn't used anywhere.
Change-Id: I405af3c808be284d19218f3f04c1e90e33e31de8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446977
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Change integrity test with FIO
to use multicore configuration.
Change-Id: I0527d9e7832c1a686b9b4fb20cb317ed17acb051
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445098
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add functional tests on creation and deletion of
of OCF bdevs with many-to-one configuration.
Change-Id: I6b740605a3341cb95e8d2a4173eeac04b0ae832b
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445097
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
FTL should pass IO errors to upper layer only in
completion callback to be consistent on sync and
async error paths.
Change-Id: I29c81af477b476c1e10b7933126737a222553ffa
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447176
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The JSONRPCClient class now support the with statement. From now on the
__del__() method is changed to close() and user need to call it manually
at object disposal or use the 'with' Python statement.
Change-Id: I74afd93d411b9596ab8f9523c54a4a7523eec5e5
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/444686
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Add extra long argument '--verbose <VERBOSE LEVEL>' to add more log
levels Default is error. Legacy'-v' parameter is translated into INFO
log level.
Some parts of code are logged using DEBUG level.
Change-Id: I2aaa6e2fbaf9b2101c6eeaec0cef6141636f135b
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436528
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In test soft hotremove is used.
For easier testing use only one nvme bdev instead of two.
Change-Id: Ia5543f0ae0773e38b92cc4d2325da2e3d787f674
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446528
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
DPDK 19.05+ gives us an ability to pre or post-process
any single vhost-user message. The user can either perform
additional actions upon some generic events, or can
implement handling for brand new message types that
rte_vhost doesn't even know about.
In order to smoothly switch to the upstream rte_vhost
and drop our internal copy, we introduce an SPDK wrapper
function to register SPDK-specific message handlers. For
DPDK 19.05+ this will use the new rte_vhost API to
register those message handlers, and for older DPDKs
this function simply won't do anything - as w assume the
internal rte_copy already contains all the necessary
changes and does not need any "external" hooks.
For now we use the message handlers to stop the vhost
device and wait for any pending DMA ops before letting
rte_vhost to process the SET_MEM_TABLE message and unmap
the current shared memory.
Change-Id: Ic0fefa9174254627cb3fc0ed30ab1e54be4dd654
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446085
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
It's disabled by default, so no functionality is changed yet.
The intention is to use the upstream rte_vhost from DPDK,
which - starting from DPDK 19.05 - is finally capable of
running with storage device backends.
SPDK still requires a lot of changes in order to support
that upstream version, but the most fundamental change is
dropping vhost-nvme support. It'll remain usable only with
the internal rte_vhost copy and with the upstream rte_vhost
it simply won't be compiled. This allows us at least to
compile with that upstream rte_vhost, where we can pursue
adding the full integration.
Change-Id: Ic8bc5497c4d77bfef77c57f3d5a1f8681ffb6d1f
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446082
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add an new API spdk_dif_generate_stream() to insert DIF into
the metadata space of newly read data block by stream fashion.
This API is tested by replacing the previous DIF generation such
that DIF is generated once all data was read.
Change-Id: I757b4e6f10fe2d9d643f56ebb678c731cdad63bb
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446594
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
This tests that DPDK buffers do not cross memory
callback allocation boundaries, and that memory
freed by DPDK is in the same units as it was allocated.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5b68e9f0864304962b9189b9f5e58f828f0d0e54
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436895
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
After the last two patches, I was able to verify that this doesn't fail
with Soft-RoCE on kernel 4.19.13
Also while here, make the output less verbose.
Change-Id: I051e62088db2995e55e07201b91e1dd286ecd22e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446285
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The possible issue could be following if you shutdown NVMe-oF target
with TCP transport as an example,
=================================================================
==61022==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 560 byte(s) in 1 object(s) allocated from:
#0 0x7ffff6efcfe0 in calloc (/lib64/libasan.so.3+0xc6fe0)
#1 0x4c6216 in spdk_nvmf_tcp_listen /home/ziyeyang/spdk/lib/nvmf/tcp.c:680
Indirect leak of 48 byte(s) in 1 object(s) allocated from:
#0 0x7ffff6efcfe0 in calloc (/lib64/libasan.so.3+0xc6fe0)
#1 0x4a77b8 in spdk_posix_sock_create /home/ziyeyang/spdk/lib/sock/posix/posix.c:291
After checking the issue, it seems that we did not call
spdk_nvmf_transport_stop_listen when removing the subsystem listener.
And this patch can solve this issue.
Change-Id: Ic75d99cb0c6a3ba1c47ac79a2d8e3887b0f6b012
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447020
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Just use a function pointer and a context.
Change-Id: I2d41ed2572d892f3328aadf7f22d8696816bf4d1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446995
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It just takes a function pointer and a context instead.
Change-Id: Id8cdc968ddbc3776f60ad73e9aa09983ca03fa3f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446993
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The match file is hardcoded to $(FP)G. If using xxTB volume NVMe
SSD, this test case will fail. So using $(S) to cover larger
volume NVMe SSD.
Change-Id: Id046cadfbc5236cd8f480981fa337d2ee9a68bf4
Signed-off-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447130
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch adds an API spdk_scsi_bdev_get_dif_ctx().
spdk_scsi_bdev_get_dif_ctx() decodes opcode in CDB, and if opcode
is read or write block commands, it gets LBA and use the lower
32bits of LBA as Reference Tag. It gets DIF information from
specified bdev next. Then it sets all to DIF context and return.
spdk_scsi_bdev_get_dif_ctx() is exported to iSCSI through
spdk_scsi_lun_get_dif_ctx().
Change-Id: Id8aac164c48e9e9d4ff7cfc9fa81bb5090f3e187
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446224
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch adds spdk_iscsi_conn_readv_data() to read PDU data
from network socket by using spdk_sock_readv().
Additionally, this patch changes the existing spdk_iscsi_conn_read_data()
to call spdk_iscsi_conn_readv_data() by creating a single struct
iovec.
Change-Id: Ied487bb71bd4261ad53c9f3744ae272e65f98d7a
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446377
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add an new API spdk_sock_readv(sock, iov, iovcnt) to the sock
library. This will be used in SPDK iSCSI target first.
Implementation was done based on vcom_socket_readv in VPP.
Change-Id: I88a8f2af4856b1035165b78d76b4a4f4587b265d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446343
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This automates the process of probing some RDMA capable Chelsio NICs
Change-Id: I1ef52ffd899d4cbd1ace65037c8acf0be099adae
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446968
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add the option to test with intel X722 NICs
Change-Id: Icb439e43768eb397dac881c6cb6979b3426fa62e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446660
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This makes it so we only have to check one variable when determining if
we want to load Soft-RoCE NICs.
Change-Id: I5ba615e26252041023ec8615a00c1777bee6cb12
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446966
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This helps us simplify the detection of Mellanox NICS and paves the way
for a more modular detection scheme for PCIe connected NICs.
Change-Id: I93f16f469c569977c43d6e20fd4616299fa8c723
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446965
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch adds an API spdk_dif_set_md_interleave_iovs().
This function is used to leave a space for metadata for each block
when the network socket reads data, or to make the network socket
ignore a space for metadata for each block when the network socket
writes data. This function removes the necessity of data copy in
the SPDK application during DIF insertion and strip.
Change-Id: I018efd77bdadcaec4679eea4dc1e404f155b0879
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446216
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK iSCSI and SCSI target don't expose any metadata and DIF settings
to the corresponding iSCSI and SCSI initiator.
Even when SPDK iSCSI and SCSI target allocate any bdev formatted
with DIF, SCSI commands sent from iSCSI and SCSI initiator don't
have any metadata and DIF information.
For that case, iSCSI target inserts and strips DIF on behalf of
iSCSI and SCSI initiator.
Hence SPDK SCSI target has to use data block size not including
metadata to process SCSI commands correctly.
This patch replaces spdk_bdev_get_block_size by
spdk_bdev_get_data_block_size in necessary places.
Change-Id: I264c8e532d1d1b016f6d8774c8ec03389528044f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445083
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reservations can be used by two or more hosts to coordinate
acccess to a shared namespace, host must register to a namespace
prior to establishing a reservation. Unregistering by a host
may cause a reservation release, this feature will be supported
after reservation acquire patch.
Change-Id: Id44aa1f82f30d9ecc5999a2a9a7c20b2af77774a
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436936
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Take a callback and an argument instead.
Change-Id: I9edda1a9bd506e12f309e52e520e97c0d705d6a2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446992
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This will make it easier to convert these operations to
spdk_thread_send_msg.
Change-Id: I4c975c22f3967a7197e69ccd230a14bdb97ba332
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446988
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
We never used this anywhere, and I need to move to a model where
the start up action is a thread message instead
Change-Id: I6b21ba9afb93a3245aceca2fe24713ffd16d0933
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446986
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Running as a non-privileged user, sudo git clone won't work
without the -E because it won't get the proxy settings, for those
using a proxy.
Change-Id: I8b471abf0066312b0eb63449d00a5647737c0136
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446162
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Similar to UNIT_TEST_NO_VTOPHYS, we need this since
a future patch will result in some of the pci_addr
functions getting linked in via a new dependency
between memory.c and init.c.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I61bd4e172ee70a5dcb99c8c6fc1fb19070a2a7cd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446460
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
io_types like FLUSH and RESET are not always supported
by base bdev modules. For example: virtio_blk bdev doesn't
support FLUSH; ocf or ftl vbdev doesn't support RESET.
Change-Id: I569ea75f8242c8bf082d7d89996ad1c7b1791570
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446493
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
FLUSH io_type shares a same process with UNMAP, except
that in the end, it calls spdk_bdev_flush_blocks function.
Change-Id: I4529bf29b7cd9f16d10f2edc99a20d25213c9c71
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446492
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Check if nested lvol stores and lvol bdevs
can be created. Check if free space for lvol store
is properly calculated.
Change-Id: I07386e397c05c5bbdbc29843686812be004592b2
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446123
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Upcoming patches will support DIF insert and strip feature in
iSCSI target and the feature will be implemented by utilizing
iovecs.
Even when we support the DIF feature, we want to keep current
batched PDU flush, and current requirement that there must be
enough free iovecs to map all segments of a PDU is too strict.
This patch alleviates the requirement by passing remaining
number of iovecs to spdk_iscsi_build_iovs().
Change-Id: I6206322839c363e0ff5abe84bfd524bdc09e23ca
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446176
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
To know the mapped length by iovecs, pdu length was got first and
then the size of partial written was reduced separately.
This patch unifies these two operations into spdk_iscsi_build_iovs().
Change-Id: Ic6f5eecc902b8e209ef00c010915f476ca16c002
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446175
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Building iovecs had been done in spdk_iscsi_build_iovs() and
fast-forwarding iovecs for the partially written first PDU had
been done in-line separately.
This patch unifies these two operations into spdk_iscsi_build_iovs().
Fast-forwarding iovecs is necessary only for the first PDU, but the
operation is applied to all PDUs after this patch.
Extra overhead will be negligible because usually at most two
iovecs are consumed, one is for the base header segment and another
is for the data segment.
Change-Id: I8feafac6d280439eb7cf73136107adbac820ae09
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446174
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
iovec_cnt and iovec_array are very descriptive and good but iovcnt
and iovs are often seen in SPDK and will be enough.
Subsequent patches will add some changes on iovec operations and
simple and familiar names will be helpful to work and review them.
This patch doesn't change any behavior.
Change-Id: I89ff74809a0ddbb358e3fc8fdc353a47338cc3c5
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446173
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
This RPC was deprecated a couple of releases ago.
bdev modules now each have their own RPC for deleting
bdevs. Due to how bdevs are created differently on
different modules, it is simply not possible to
have one delete_bdev RPC that would work for all bdev
types.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia46c95dce6e35f7557e8d41c41b8fea382924547
Reviewed-on: https://review.gerrithub.io/c/442615
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Default 'unmap' option stays as it was.
'Write_zeroes' comes useful when one wants to make sure
that data presented from lvol bdevs on initial creation presents 0's.
'None' will be used for performance tests,
when whole device is preconditioned before creating lvol store.
Instead of performing preconditioning on each lvol bdev after its creation.
Change-Id: Ic5a5985e42a84f038a882bbe6f881624ae96242c
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442881
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When the specified buffer size to spdk_bdev_io_get_buf() is greater
than the permitted maximum, spdk_bdev_io_get_buf() asserts simply and
doesn't call the specified callback function.
SPDK SCSI library doesn't allocate read buffer and specifies
expected read buffer size, and expects that it is allocated by
spdk_bdev_io_get_buf().
Bdev perf tool also doesn't allocate read buffer and specifies
expected read buffer size, and expects that it is allocated by
spdk_bdev_io_get_buf().
When we support DIF insert and strip in iSCSI target, the read
buffer size iSCSI initiator requests and the read buffer size iSCSI target
requests will become different.
Even after that, iSCSI initiator and iSCSI target will negotiate correctly
not to cause buffer overflow in spdk_bdev_io_get_buf(), but if iSCSI
initiator ignores the result of negotiation, iSCSI initiator can request
read buffer size larger than the permitted maximum, and can cause
failure in iSCSI target. This is very flagile and should be avoided.
This patch do the following
- Add the completion status of spdk_bdev_io_get_buf() to
spdk_bdev_io_get_buf_cb(),
- spdk_bdev_io_get_buf() calls spdk_bdev_io_get_buf_cb() by setting
success to false, and return.
- spdk_bdev_io_get_buf_cb() in each bdev module calls assert if success
is false.
Subsequent patches will process the case that success is false
in spdk_bdev_io_get_buf_cb().
Change-Id: I76429a86e18a69aa085a353ac94743296d270b82
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/446045
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Adapted our custom rte_vhost APIs to the upstream DPDK
version which has independently added similar APIs.
This will potentially allow us to remove our internal
rte_vhost copy.
rte_vhost_set_vhost_vring_last_idx() was renamed to
rte_vhost_set_vring_base() and the last vring indices
have to be acquired with a newly introduced rte_vhost_get_vring_base()
rather than rte_vhost_get_vhost_vring().
This is only a refactor, no functionality is changed.
Change-Id: I1ca2c1216635c117832c9d9c784d5661145c04cd
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/446081
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Test script for attaching Windows VM to vhost scsi
or vhost blk controller and creating various filesystem
types on the attached devices.
FIO integrtity test as a possible improvement in
the future.
Change-Id: I5bd784398551742a9226b9a7ba16a45edd27f474
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443359
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This utility used to be called "bdevtest" so that's
what opts.name was set to for spdk_app_opts_init().
Change it to the new name "bdevio".
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id8e6614c6fe82651952f46ec56de14ef0a8961f0
Reviewed-on: https://review.gerrithub.io/c/445800
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
There are some cases that virtual bdev open and close
the device and QoS will be disabled at the last close.
In this case, when a new bdev open operation comes again,
the QoS needs to be enabled again.
Change-Id: I792e610f4592bad1cac55c6c55261d4946c6b3e2
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442953
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
It seems like DPDK 19.02 has split the "session mempool"
into two separate mempools but this isn't really described
in the DPDK release notes, so this patch only makes our
crypto code behave just like DPDK crypto examples.
rte_cryptodev_queue_pair_setup() no longer accepts
a separate mempool parameter but instead requires it
to be passed through a new field in struct
rte_cryptodev_qp_conf, which is also passed as a param
to rte_cryptodev_queue_pair_setup(). It's referred to as
"session private mempool" instead of "session mempool",
which makes some sense since we already use
rte_cryptodev_sym_get_private_session_size() (with the
word "private" in name) to calculate its size.
The other mempool - "session mempool" - now has to be
allocated with rte_cryptodev_sym_session_pool_create()
instead of regular rte_mempool_create().
Change-Id: I3bc6185855988b864ca59bc1972beaf4f7ea8925
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443738
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previously, test data buffer was filled by one value, 0xAB, but
this may not be enough to detect future potential issues.
ut_data_pattern_verify() already did per-byte check, but size of
test data buffer is small and completion time of tests is not long.
So, even if we change ut_data_pattern_generate() to set per-byte
data instead of memset(), extra overhead of test completion time
will be negligible.
Change-Id: I35677b238f96a73c0c408f0818f080a92492dac6
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/445430
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Allow user to add seed value for guard compuation to DIF context.
This will avoid the guard being zero in case of all zero data.
NVMe controller doesn't support seed value for guard computation
explicitly, and hence if we want to use such a seed value in
NVMe controller, we have to format metadata more than 8 byte,
and add seed value into the reserved metadata field.
But some popular iSCSI/FC HBAs and SAS controllers have supported
seed value for guard computation, and so supporting seed value
in the SPDK DIF library is very helpful for some use cases.
Hence this patch makes the DIF library possible to specify seed
value for those use cases.
Change-Id: I7e9e87cb441bf263e64605c7820409fdc22dd977
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444334
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
When ran SPDK UT on arm64 system, observerd the valgrind fault:
ARM64 front end: branch_etc
disInstr(arm64): unhandled instruction 0xD5380000
disInstr(arm64): 1101'0101 0011'1000 0000'0000 0000'0000
==959274== valgrind: Unrecognised instruction at address 0x4014c90.
It is because that arm64 is not supported completly in the latest
valgrind release v3.13.0.
With the patch, SPDK UT can run successfully on arm64 system.
Change-Id: I5b77692f6b148b171fb07dcc1516d194d7ab58b9
Signed-off-by: tone.zhang <tone.zhang@arm.com>
Reviewed-on: https://review.gerrithub.io/c/444984
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In some situation, the script needs to try more times to kill
spdk_tgt. So increase the loop count.
Change-Id: I5c3596b0bae8ee965bb0b3532ba100dfd0aec82d
Signed-off-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-on: https://review.gerrithub.io/c/445436
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_env_opts->env_context may now contain a DPDK-specific
string that will be appended directly into rte_eal_init().
It can be used to e.g. override the default EAL loglevel,
which was hardcoded to RTE_LOG_NOTICE so far.
This is primarily meant to be used during development.
As a test for this feature, the vtophys test app will now
set the highest possible EAL loglevel which will give us
a ton of additional debug logs.
Note: the opts->env_context field is implementation-specific
and hence the vtophys app needs to check if it's run with
our env_dpdk. As SPDK_CONFIG_ENV is a raw text not even
surrounded with quotation marks, the vtophys app needs to
do a bit of #define magic to make it a string.
Change-Id: I0b2196770e5b59a6c33d0170337c34f9f8b8466e
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/445111
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Test consecutively fails for at least couple of days.
Test fails with:
"Failed to write to /dev/nvme-fabrics: Cannot allocate memory"
coming from kernel module.
Change-Id: Idba1bbb3fb63df8a1fb460752ee9cb5780d89860
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/445660
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I0c1be8860263a6eed72f2d572fc594c084535ee8
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443579
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This patch refactors driver init and in doing so eliminates the mem
leak described in the GitHub issue. Also it is now consistent with
how the pending compression driver does init.
Fixes#633
Change-Id: Ia2d55d9e98fb9470ff8f9b34aeb4ee9f3d0478f5
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442896
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is in a effort to consolidate SCSI read and write I/O
for the upcoming transparent DIF support.
Previously conversion of bytes and blocks are done both in
SCSI layer and BDEV layer. After the patch series, conversion is
consolidated into SCSI layer.
Change-Id: Ib964a41ec22757f2a09cea22f398903f78d0781f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444779
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This is in a effort to consolidate SCSI read and write I/O
for the upcoming transparent DIF support.
Previously conversion of bytes and blocks are done both in
SCSI layer and BDEV layer. After the patch series, conversion is
consolidated into SCSI layer.
About conversion from bytes to blocks, we don't expose bdev API
spdk_bdev_bytes_to_blocks and but create private helper function
_bytes_to_blocks because we will use not block size but data
block size when we support transparent DIF feature.
Change-Id: I37169c673479c92e027e2507a0e54a1e414b43e1
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444778
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
CPU profiling on workloads with intensive vtophys
operations (i.e. very small CB-DMA transfers) exposed
overhead introduce by spdk_vtophys having to call
spdk_mem_map_translate in a different compilation
unit. Let's just move the vtophys.c contents into
memory.c so that spdk_vtophys can inline
spdk_mem_map_translate and avoid this extra overhead.
This of course breaks the memory and vtophys unit
tests, so some additional changes are needed there
to keep everything linking correctly.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I295ed5f441d3eec7abdbc9d881c49d2174ec9f48
Reviewed-on: https://review.gerrithub.io/c/444975
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Also use the same style condition check for secondary process
with PCIE type.
Change-Id: I93c83126145255887914ef5efea1a493c8f7f767
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/444492
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Existing NVMe driver uses a global list g_nvme_init_ctrlrs
to track the controllers during initialization, and internal
function will start each controller in the list one by one
until the list is empty. We introduce a probe context
and move the global list into the context, with the context
we can enable asynchronous probe API in the next patch, also
this can enable parallel probe feature.
Change-Id: I538537abe8c1a4a82fb168ca8055de42caa6e4f9
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/426304
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previously, function spdk_nvme_probe_internal() will probe
NVMe controllers and then bring up probed controllers
into the ready state after that. Broke up original two parts
with probe and start stage, this will help us to introduce
a probe context in the next patch.
Change-Id: Ie0c55a6a5463fb437f84349b0b2b33a217ba63e0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/426303
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This typically has pollers registered anyway, so the
parameter had no effect.
Change-Id: Ica904d83c48874a618e316f3a76e25e0c67d5cf7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/444452
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Running iSCSI in loopback runs into some cases where
a core is considerably impacted by the initiator
TCP traffic, even though the scheduler is trying
to schedule it on different cores. Gang is working
through modifying the QoS tests to just use bdevperf
instead of iSCSI, but until that is ready, let's
allow more variance to reduce the fairly significant
rate of test failures we're seeing due to this test.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I99fe13621f5ca2f8e6402fc17fb859df815fe05e
Reviewed-on: https://review.gerrithub.io/c/444458
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Althrough SPDK already provides a API to users which
can process runtime timeout NVMe commands, but it's
nice to have another API here, SPDK NVMe driver can
use it to break the endless wait. Also use the API
first in the initialization process, because we don't
want to add another initialization state with Intel
only supported log pages.
Change-Id: Ibe7cadbc59033a299a1fcf02a66e98fc4eca8100
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/444353
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Iabe45ecc7dc52d45b792a1a5b1e42bb511c13a89
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443238
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Bug introduced when some fixes for DPDK 19.02 were added.
Fixes#659
Change-Id: I5ef9ce6a5e30591fc7d2aeaa8d398effe42888f6
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/444449
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
nvmf was just setting it to 0 (which is the default).
The reactor test was setting it to 1000, which wasn't
actually used since there are always pollers registered.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I673d859584c404d9b2746fbc8cd4f00fa38df5e5
Reviewed-on: https://review.gerrithub.io/c/444307
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This test doesn't really need to use this - in general
we want to test max event throughput with no delays
interjected.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If4aaf90ce815687a5ca725a89dfab5e057f9a5c4
Reviewed-on: https://review.gerrithub.io/c/444306
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We are doing away with using the stub application as
much as possible, so let's just remove references to it
where we can.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I52802474f1aaaf100c1b929f4e3ac555532a8410
Reviewed-on: https://review.gerrithub.io/c/444305
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Ben's having to work around all of the max_delay_us code
in his thread/reactor refactoring. Once we have a real
scheduler, this whole idea will need to be rethought. So
for now, let's get existing code off of the max_delay_us
mechanism, so that we can remove it.
For the stub app, just add a poller that does a usleep.
This will have the same effect as the current behavior.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iabfba6e0c5a15a688f65ba33a788bd346359d072
Reviewed-on: https://review.gerrithub.io/c/444303
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
g_io_size is already verified not to be zero when args are originally parsed,
and if g_io_size < data_block_size, then g_io_size % data_block_size != 0.
So current error log is not correct and just testing if IO size is multiples
of block size will be correct.
Change-Id: I5d32425e251773f1c96740c674b4d238dfb80f8d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444310
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Extract DIF check type settings from the bdev and hold them
in the target, then generate DIF for write I/O based on them.
Change-Id: Ice85121423b6b8545e45d7def1aabed59ed6ce8e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/443357
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Enlarge data buffer to include metadata if md_size is not 0 and
md_interleave is true of target bdev. Then generate and verify
data pattern by skipping metadata field.
If md_size is not 0 but md_interleave is false, return immediately
until bdev supports APIs with separate metadata.
Change-Id: Ia3c2ae5fbcc5b7612585f1dfeb5d30e821d48acf
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/443356
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The possible reason of failure of task construction is out of memory.
Hence it's OK to return pointer to the constructed task simply.
Change-Id: If6e270caefb61192c8f0055506d957c3c5d07016
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/443355
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Bdevperf have returned immediately if -ENOMEM, continued if failure
due to other reasons, and registered the created target otherwise.
So, keep this behavior by passing the reference to the pointer to
struct io_target, and check both return code and the value of the
reference.
And this refactoring will clarify the logic related with target
assigment to cores.
Change-Id: I24593f7b4523daf4395643bdc8886499c36ea3c7
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/443354
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We should never be going over these limits in the respective transports,
but add asserts to check this during testing.
Change-Id: Ifcaa82ccf58546a38020b31df54ee5d1d9822b8b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442777
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For devices that support fewer SGE elements than our default values, we
need to adjust the I/O unit size so that we don't ever try to submit
more SGLs than we are allowed to.
Change-Id: I316d88459380f28009cc8a3d9357e9c67b08e871
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442776
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Python3 (3.6.7) gives W605 errors in regular expressions, causing the
SPDK style checks to fail on the Python scripts doing the style checking.
This fix allows these Python scripts to run without errors.
This is a known issue - see https://github.com/PyCQA/pycodestyle/issues/814
Change-Id: I71cdff5d6c89e19b200c989f3d9da35bb4f7189d
Signed-off-by: James Bergsten <jamesx.bergsten@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443955
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Coremap is a global variable in bdevperf, and add the prefix "g_" to
it.
Change-Id: Ia22802ce2152d8748cffc6916197be4ddd615618
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444013
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently, the SPDK_BDEV_REGISTER_MODULE() macro uses __LINE__
to generate functions like spdk_bdev_module_register_187().
Typically, this is not a problem as these functions are not called directly
rather, they are only used as constructor functions to load the bdevs during
system startup.
There are languages however, (e.g rust) that require these functions to be
referenced explicitly to prevent them from being removed during the linking phase.
In order to reference them, having the names predictable (and potentially
changed per commit) makes things easier.
Change-Id: I15947ed9136912cfe2368db7e5bba833f1d94b15
Signed-off-by: gila <jeffry.molanus@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/443536
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_thread_poll()
This is an optimization if the calling function already knows the
current time.
Change-Id: I1645e08e7475ba6345a44e0f9d4b297a79f6c3c2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443634
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
DPDK 19.02 requires this mempool to be allocated via
crypto-specific function which returns rte_mempool.
To keep the amount of #ifs minimal, we'll use rte_mempool
unconditionally.
Change-Id: I3a09de41e237e168580bb92b574854e291e68a74
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443785
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We started to use iptables in patch 21bd94275
(libsock: add functional tests) but never added
the package dependency.
Change-Id: I651f2545a11f546f8b47f9759fbaed3a141f0928
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443597
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Includes the required DPDK dependencies for SPDK block Reduce aka
Compression.
Change-Id: Ic1ea3cbeb9373a7700f6f0c2a3194d65d6a34a41
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/429523
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
On VM these tests takes ages.
Change-Id: Id4799e2d226e59b430e899983a6470080b5c37dc
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443795
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Also remove some unneeded stubs since the thread
library is linked by default to all unit tests.
Note that the lun.c unit tests include test_env via
the new include of ut_multithread.c. It needs ut_multithread
to simplify allocation of threads needed so that the lun.c
code can safely register pollers.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I922b5fed12ff7e2802b19d7f953c1b2352800f73
Reviewed-on: https://review.gerrithub.io/c/432919
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
mk/spdk.unittest.mk already includes mk/spdk.common.mk, so it's
not needed. This also fixes an issue where touching an included
.mk file would not trigger unit tests to rebuild if they had
this duplicated mk/spdk.common.mk include.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I41a04eb77ce468849cb9b53bd1f76df6fec06e46
Reviewed-on: https://review.gerrithub.io/c/443980
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Next patch will introduce enum spdk_dif_check_type for user to
know easily if checking DIF field is enabled or not.
This patch renames bitmask macros from SPDK_DIF_*_CHECK to
SPDK_DIF_FLAGS_*_CHECK to avoid mis-interpretation .
Using FLAGS was derived from SPDK_NVME_IO_FLAGS_PRCHK_* in
include/spdk/nvme_spec.h.
Change-Id: I89e155d047352f54091c14b9251464cd3a72a162
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/443338
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Recently, we started setting the list of RDMA wr in the parse_sgl
function. This meant that we started using a variable we hadn't before
which was uninitialized in the unit tests which caused a valgrind error.
Change-Id: I3f76ce1dcf95d1d41fe8b3f96e878859036a5031
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443791
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Those were added to allow us mocking DPDK functions
originaly defined as static inline. They are based on
a fixed DPDK version and currently require a lot of
effort to update for DPDK 19.02+. There's a different
way of mocking them:
> #define rte_crypto_op_bulk_alloc mock_rte_crypto_op_bulk_alloc
> static inline unsigned mock_rte_crypto_op_bulk_alloc() { ... }
This patch uses the above method to mock all static
inline functions before including the crypto source file
in crypto_ut. As a result we can get rid of the rte_
header copies from SPDK, which greatly reduces the
effort required to make crypto_ut work with DPDK 19.02.
Change-Id: I0f07a9ff4f1c63036e058dffd3fcf0c21e77bff3
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443592
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In the next patch we'll e.g. move the vbdev_crypto.c
include after some of those functions, so move them
to the very top of the file now.
Change-Id: I1abaf724ea10c8c6d461663ba3be0a5a37b34f4e
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443591
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The buffers are allocated and freed inside the
test suite, but aren't used for anything.
Change-Id: I341dc3315d20d15f7b571e9d18438c98a74def11
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443589
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is the functional opposite of waitforblk.
Change-Id: I5e9f77c9ea05b83b8dbfbf49bb3baa2ae8cc1086
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443316
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The management channel was used in the RDMA transport prior
to the introduction of poll groups and made its way over to
the TCP transport when it was written. Eliminate it in favor
of just using the poll group.
Change-Id: Icde631dd97a6a29190c4a4a6a10a0cb7c4f07a0e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442432
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Change-Id: Iefb4c76f2db5416d185556fa8c84a36291e72d3e
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443237
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
-S takes a parameter for how many seconds to wait
between each stats output - that was missing in the
usage message.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I05a2f770996a72db4894b275932a308e2355cbcc
Reviewed-on: https://review.gerrithub.io/c/443282
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Introduced a new variable to run functional tests.
It's enabled by default, and can be manually disabled
on systems where e.g. only unit tests are run.
SPDK_RUN_FUNCTIONAL_TEST is a supplement to SPDK_UNITTEST.
The two are completely independent - both can be enabled,
disabled, or run in any combination.
The new variable is prefixed SPDK_RUN_ as it aligns nicely
with SPDK_RUN_CHECK_FORMAT, SPDK_RUN_VALGRIND, and
SPDK_RUN_ASAN, all of which control how much is tested.
SPDK_UNITTEST should eventually follow the same pattern
as well.
This gives us 2 layers of configuration:
SPDK_TEST_* <- what is tested
SPDK_RUN_* <- how it is tested
The following would run UT+ASAN for FTL and BlobFS, without
running their functional tests:
```
SPDK_RUN_FUNCTIONAL_TEST=0
SPDK_RUN_ASAN=1
SPDK_TEST_UNITTEST=1
SPDK_TEST_FTL=1
SPDK_TEST_BLOBFS=1
```
Change-Id: I9e592fa41aa2df8e246eca2bb9161b6da6832130
Signed-off-by: Seth Howell <seth.howell@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442327
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
request.c didn't have much code, so let's collapse
it into ctrlr.c and make that the place where all
software emulator of the NVMe controller, including
request handling, is done.
Change-Id: Id7c98010cb222a414a5aa0b78bfb299a0ffc418f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440592
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously, all I/O commands were implemented by simply
passing them to the bdev layer. Now, some I/O commands will
be emulated. Prepare for that by moving the code for this
function to ctrlr.c, where the emulation will occur.
Change-Id: Id34e5549e5ce216d602fb347b4506fbd324eed4e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440591
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Modify existing code of parsing primary partition table to support parsing
the secondary.
Main difference of these two tables is that they have inverse buffer layout.
For primary table, header is in front of partition entries. And for secondary
table, header is after partition entries. So add helper functions to extract
header and partition entries buffer region from primary or secondary table
based on current parse phase.
Split the exported funtion spdk_gpt_parse into two functions spdk_gpt_parse_mbr
and spdk_gpt_parse_partition_table. So spdk_gpt_parse_partition_table could be
used to parse both primary and secondary table.
Change-Id: I7f7827e0ee7e3f1b2e88c56607ee5b702fb2490c
Signed-off-by: lorneli <lorneli@163.com>
Reviewed-on: https://review.gerrithub.io/c/441200
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Test case in blockdev.sh is causing nightly tests to fail
so put it back to nightly_failing list.
Put vhost read-only test on the list to check if it passes
on qemu 3.0.0. Bring back vhost live migration test since it
is missing vhost.sh.
Change-Id: Ic8b5341808cdf843850d22fb6a22a64e92dccafa
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/436840
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This patch fixes potential memory leak in spdk_app_parse_args() when
white or blacklist of devices is defined.
Change-Id: Ia586d77c67dbe6c664447f8431e1a7a30d624ae1
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440982
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
iSCSI target node was not deleted after error injection test.
Later in test this caused iscsiadm to connect to both EE target node
and to split nvme target node as they shared the same IP:PORT pair.
512MB malloc was too small to fit in spdk sources and compilation
products.
Fixes#642
Change-Id: I3d8ac6e1837cddad570f95263d3c6f529e64d5d8
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442867
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The stop handler already calls blockdev_heads_destroy(), so we
don't need to call it if bdevperf_construct_targets_tasks()
fails. Calling it twice actually results in double-frees and
other types of memory corruption.
Fixes#592.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iba92b1ae64453036829a67ab6f3dad970a368af0
Reviewed-on: https://review.gerrithub.io/c/442628
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
trace_record is used to poll the spdk trace shm file
and store new entries from it to another specified trace file.
This could help retain the trace_entires from the overlay of
trace circular buffer
Note:
* trace_record reads the input tracefile into a process-local
memory and writes trace entries to the output file only at shutdown.
* trace_record can be shut down on SIGINT or SIGTERM signal.
A usage sample is:
./spdk_trace_record -s bdev_svc -p <spdk app pid> -f trace.tmp -q
Change-Id: If073a05022ec9c1b45923c38ba407a873be8741b
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/433385
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
nvme-cli in NVMf tests currently fails to initialize
the NVMe driver and exits straight away [1]. It expects
the primary process to initialize the driver first, but
since the primary process doesn't operate on any NVMe
devices, it doesn't initialize the driver at all.
Fix this by running nvme-cli without multi-process mode.
In NVMf tests, nvme-cli is only used to discover, connect
and disconnect from an SPDK NVMf target. It does not need
to access any shared memory resources.
This wasn't an issue before, because we used an outdated
DPDK version for nvme-cli which didn't detect any other
shared memory processes of SPDK.
[1] nvme.c: 337:nvme_driver_init: *ERROR*: primary process
is not started yet
Change-Id: Id56f94c6655049e87ab9d93ee38853faf40a11e5
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442552
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
- Add option to throttle iops in VMs using cgroups
- Add option to measure CPU utilization in VMs using SAR
- Add option to limit kernel vhost CPU cores (not NUMA optimized)
- Add option to do lvol preconditioning using fio bdev plugin
before running IO performance test
Change-Id: I7e0fcf977be96ecf837385c2abc9d5dabbe2f8c5
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/434229
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This includes properly detecting when a key's name
extends past the end of the valid data.
Note that the unit tests were using sizeof() instead
of strlen() since some of the strings contain
NULL characters. This means that we should be
subtracting one to account for the implicit null
character at the end of the string. Note that the
iSCSI spec only says that the key/value pair has to
end with a null character - a key/value pair that
is split across two PDUs will not have a NULL character
at the end of the first PDU.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie95d6dd3b9ffa6a3902a31771ac4edb482418cce
Reviewed-on: https://review.gerrithub.io/c/442450
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Since params are parsed directly from the PDU's data
buffer, we need to know the end of the valid data. Otherwise
previous PDUs that used this same data buffer may have left
non-zero characters just after the end of the text associated
with a LOGIN or TEXT PDU.
Found this bug while debugging an intermittent Calsoft test
failure. Added a unit test to reproduce the original issue,
which now verifies that it is fixed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic3706639ff6c4f8f344fd58c88ec11e247ea654c
Reviewed-on: https://review.gerrithub.io/c/442449
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch introduces functional tests for FTL bdev.
The tests cover various I/O workflows and check data integrity. Several
scripts have been added to test the FTL library:
* generate_config.sh - prepares configuration scripts for specified
device
* restore.sh - tests restoring device's state from the SSD
* fio.sh - runs tests based on fio and fio_plugin
The tests are run from autotest.sh when the SPDK_TEST_BDEV_FTL flag is
set.
Change-Id: I561d99ed35fe91eadd3756789cc99afe2da8c1db
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/431330
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
We currently use:
`./rpc.py 1>&2 2>/dev/null`
And apparently our stdout redirection gets treated as
a python argument, which is not what we intended. This
caused waitforlisten function to print some unnecessary
messages.
To fix, we could either wrap python with extra brackets
`$(./rpc.py) 1>&2 2>/dev/null` or use &>/dev/null. We
go with the latter.
Fixes#616
Change-Id: I49d2380392435447b7b93259055c1d02c4b9c157
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442262
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This is intended to avoid a crypto failure when we have ASAN disabled.
In order to appease a scan-build error, we have to assert that the
memory address for two g_io_ctx->cry_iov.iov_base is different between
runs of _crypto_operation_complete. However, when we have asan disabled,
two subsequest calls to spdk_dma_malloc yield the same address, so
change the alignment to prevent allocating the same address.
Change-Id: Ia3dfbec5bb16d00bbe7dc136a886e0b9caea71a7
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442413
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
In SPDK, we will build isa-l with no shared option
and then integrate it into SPDK. And we do not need
to install isal in the system libaries.
Note: ocf build in autobuild.sh now needs to build
include/spdk/config.h before building the ocf library,
to ensure that header is available in a clean build
environment.
Change-Id: I3f0ce6932b386de17a77cf5bfdfd738b22417e2d
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Signed-off-by: paul luse <paul.e.luse@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441279
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Chunyang Hui <chunyang.hui@intel.com>
Error check of strtol is left to users of it. But some use cases
of strtol in SPDK do not have enough error check yet.
For example, strtol returns 0 if there were no digits at all.
It should be avoided for each use case to add enough error checking
for strtol.
Hence spdk_strtol and spdk_strtoll do additional error checking
according to the description of manual of strtol.
Besides, there is no use case of negative number now, and to keep
simplicity, spdk_trtol and spdk_strtoll allows only strings that
is positive number or zero.
As a result of this policy, callers of them only have to check if
the return value is not negative.
Subsequent patches will replace atoi to spdk_strtol because atoi
does not have error check.
Change-Id: If3d549970595e53b1141674e47710fe4dd062bc5
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/441626
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Add new RPC method for OCF bdev: get_ocf_bdevs
It is useful in respect to not registered OCF bdevs
which do not appear in standard get_bdevs call
Change-Id: I8a5fc86a880b04c47d5f139aa5fa4d07ca39c853
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441655
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add test for hotremove case for OCF bdev
Change-Id: Iaa1ee32feef50fa45be2bbf2351d9e6e9d3f2dfc
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439567
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add tests for creation and deletion of OCF bdev
We explicitly check 'claimed' property of base devices
Other issues like segfaults or custom SPDK errors
also can be revealed by these tests
Change-Id: Ia1d79df8db2e734e8d868a733655f69a0348de8e
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439536
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Two fio instancess will try to do simultaneous I/O
to a single vhost block device.
The test uses default_initiator.job as a fio config,
which apparently wasn't used anywhere and had to be
slightly adjusted to work. Specificaly, we had to
specify an empty job in the config file, as specifying
it from the command line wouldn't make it inherit
any options from the [global] section in the file.
Change-Id: I2c2a96a709c567f5c910715a5b3d85a4e28bcb97
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/419066
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add test for flush and unmap IO types
We test correctness with bdevperf -w
by watching if any errors produced during its run
Change-Id: I07dcda5b976aa0d23e75ef2a312dd9780c6c39f3
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439647
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Add SPDK_TEST_CAS suite
Add basic integrity test with multithread-multidevice fio with cache
modes WT and PT
Change-Id: If2916558894d9f7efd9628eb99f7338c90b312b1
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439346
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
In patch fbec702944 (bdev/crypto: Set QAT alignment
requirement) we added an alignment requirement for I/O
buffers, but the internally-allocated buffers for
encryption haven't respected it.
We now allocate those buffers with the crypto bdev's
required alignment. It is only required for QAT and we
do it unconditionally, but we don't want to strcmp the
driver name in the hot I/O path just for that - the
code is to be refactored anyway.
Change-Id: I2cbc04408ddc5574f212b63536a05eb73ceba104
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441908
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds tests for bdev histograms using bdevperf.
Patch also adds bdev_rpc dependency in bdevrpc Makefile
to enable histograms RPC calls in bdevperf.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I1e0e94933936864df441e49f0016f9aa7705a7e2
Reviewed-on: https://review.gerrithub.io/c/437640
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This test was causing rare random failures of unit tests
Change-Id: I3031ed9a7f01018f093d9856b719b7604c5e30f1
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441875
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jakub Radtke <jakub.radtke@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
With all the patches in place, we can finally
enable having more than one simultaneous sessions
to a single vhost device.
This patch adds a unique id to the session structure,
similar to the one in a vhost device and also fills in
the implementation holes in foreach_session().
Vhost-NVMe can support only one session per device
and now has an additional check that prevents it from
starting more than one at a time.
Vhost-SCSI also has the same check now since it needs
additional work on the lcore assignment policy. The
check will be removed once the required work is done.
Change-Id: I13a32c7a0eae808e9bec63a7b8c15ec0bc2e36ed
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439324
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
It's sessions that are tied with the lcores now.
This makes the vhost devices accessible by any
thread that only locks the global vhost mutex.
The mechanism used for external device events was
refactored to serve for foreach_session() API.
Additionally, since we don't want to handle cases
where the entire vhost device gets removed while
an asynchronous foreach_session chain is pending,
a new per-vdev counter of pending async operations
was added. We'll fail the device removal request
if there are any pending operations. Eventually
we would like the device removal to be asynchronous,
but that's a todo for later.
The external events are still there, although
they only lock the mutex and call the provided
function now.
Change-Id: I20618f9420a9bc04270373469deaad8fb2049c7c
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439323
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The controller shall treat a Keep Alive Timeout in the same manner
as connection loss. If the Keep Alive feature is in use and the
timer expires, then the controller shall:
1, stop processing commands and set the Controller Fatal Status
(CSTS,CFS) bit to '1';
2, terminate the NVMe Transport connection;
3, break the host to controller association;
A timer poller is added to each subsystem to monitor timeout event.
Change-Id: I001afab8a6764f30c39df37fa96384180d117486
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439330
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Some users require to do write zeroes operation when
erasing data on lvol. Currently the default method is
unmap. This patch adds flag to spdk_rpc_construct_lvol_bdev
call that changes default erase method. This is also a base
implementation for possible future function for erasing
data on lvol bdev.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I8964f170b13c2268fe3c18104f7956c32be96040
Reviewed-on: https://review.gerrithub.io/c/441527
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
The error message in the chandler pool is:
bdev.c:1127:_spdk_bdev_finish_unregister_bdevs_iter: *ERROR*: Unregistering claimed bdev 'Malloc2'!
bdev.c:1127:_spdk_bdev_finish_unregister_bdevs_iter: *ERROR*: Unregistering claimed bdev 'raid0'!
And this patch can fix this.
Change-Id: I8a247344aa09b62a7395a5513631e7bef6cf0d32
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441319
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch implements unit tests for the following modules:
* band
* PPA (Physical Page Address) translations
* write buffer
Change-Id: Ia7292bd3027347e8a3da77dafe71cde2c016bf38
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/431328
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds the RPC support for the Read/Write separate
bandwidth limit controls. The basic usage as following:
usage:
rpc.py set_bdev_qos_limit [-h] [--rw_ios_per_sec RW_IOS_PER_SEC]
[--rw_mbytes_per_sec RW_MBYTES_PER_SEC]
[--r_mbytes_per_sec R_MBYTES_PER_SEC]
[--w_mbytes_per_sec W_MBYTES_PER_SEC]
name
positional arguments:
name Blockdev name to set QoS. Example: Malloc0
optional arguments:
-h, --help show this help message and exit
--rw_ios_per_sec RW_IOS_PER_SEC
R/W IOs per second limit (>=10000, example: 20000).
0 means unlimited.
--rw_mbytes_per_sec RW_MBYTES_PER_SEC
R/W megabytes per second limit (>=10, example: 100).
0 means unlimited.
--r_mbytes_per_sec R_MBYTES_PER_SEC
Read megabytes per second limit (>=10, example: 100).
0 means unlimited.
--w_mbytes_per_sec W_MBYTES_PER_SEC
Write megabytes per second limit (>=10, example: 100).
0 means unlimited.
Change-Id: I822ec4814d21adff9826ce03a6af3783b1b98f44
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/417650
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch adds the support of read and write separate
bandwidth rate limits control with the configuration file.
Below is the example (in MiB) for the configuration section:
[QoS]
Limit_Read_BPS Malloc0 100
Limit_Write_BPS Nvme0n1 200
Change-Id: I0221516ce70c3fbb07b9e80c1c814ed5ba271c88
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/416672
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We know how big this should be so no need to dynamically allocate it.
Change-Id: I00ae6cb7c7f525d946d213e0f58cc5fe05bcf932
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441128
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In SPDK sock_ut, the port 3260 is tested. It is conflict with the SCSI
Target Daemon (tgtd). If the service is enabled, it makes sock_ut failure.
Suite: sock
Test: posix_sock .../home/ubuntu/spdk/lib/sock/posix/posix.c: 238:spdk_posix_sock_create: *ERROR*: bind() failed errno = 98
FAILED
The patch changes port 3260 to UT_PORT, and enhance the error log when
socket bind is failed.
Also enhance error log carrying port value in posix.c.
Change-Id: I31e47af49335cdf7eaffa44237860ebc140d2419
Signed-off-by: tone.zhang <tone.zhang@arm.com>
Reviewed-on: https://review.gerrithub.io/c/439983
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Starting DPDK on all cores causes fairly frequent hangs
on one of our CI BSD systems, so we limit DPDK to just
the first CPU core. This will let our CI pass while we
investigate the real issue.
Change-Id: Iaa5b665b1364acd04555063677adbd12230ed992
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441567
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now that spdk_thread_poll can be called from within
a thread, some of the unit tests can be a bit simpler.
Change-Id: Ib7b92c3f59862e5c128f5e0cc8a08f65e2b89e93
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441160
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Purpose: To avoid the buffer contention among different
polling groups if there are multiple core configurations
for NVMe-oF tcp transport.
Change-Id: I1c1b0126f3aad28f339ec8bf9355282e08cfa8db
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/440444
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added set_read_only_lvol_bdev() RPC that marks
lvol bdev as read only.
This enables to create clones off of a base lvol,
without having to create additional lvol bdev with snapshot.
Change-Id: Ic20bbcd8fbebcef157acce44bfa1da035b0da459
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440534
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Default DPDK base virtaddr falls into a region reserved
by ASAN. DPDK 18.11+ will try to find the nearest available
address space by trying to do mmap over and over, which will
take ages to finish. We speed up the process by specifying
an address that's not supposed to be reserved by ASAN.
Regular SPDK applications do this implicitly, so now we
also do it in the env_dpdk_post_init test.
Change-Id: Ic070813a92d719933ebdaa138a62ef6795390de5
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439897
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add installing python3-pandas.
put it into vm_setup.sh, this package is needed by autorun_post.py
Change-Id: I76c98c54f16be69879ac05d5128a049fc693e455
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/435968
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Need to check user input and return status of parsing
to prevent app or target from crashing.
Input checking function will be added in the future.
Change-Id: I8167ac13306ae4f81e2cacb80edd9dcf9382c374
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439479
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This change is required for unit tests that use spdk_ring mock
in multithreaded scenarios.
Change-Id: I8f5e83de69a685078cbb01e55daac650f6ae1db1
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440721
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is shared between all currently valid transports. Just move it up
to the generic structure. This will make implementing more shared
features on top of this a lot easier.
Change-Id: Ia896edcb7555903ba97adf862bc8d44228df2d36
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440416
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK NVMe driver and NVMe CLI define the parameter about DIF location as
follows:
If set to 1 and DIF is enabled, then DIF is transferred as the first 8
bytes of metadata. If set to 0 and DIF is enabled, then DIF is transferred
as the last 8 bytes of metadata. Defaults to 0.
This patch fixes the apparent inconsistency.
Change-Id: I481332bb9a6caa488664dbd1fe6039270b9f9663
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/440672
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This name more closely resembles pthread_exit, which is a
closer analogy to how the new threading library works.
Change-Id: I68b04509f3ff8e94b8688804a7e5661155a3ecd1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440597
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This mirrors pthread_create, which works more closely
to the new style where SPDK libraries can spawn their
own threads.
Change-Id: Ic524c4c35bcf7c1611e4f261ebb64b98ac5a5a1b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440596
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Instead of implicitly grabbing the thread from the thread
local variable, make it explicit.
Change-Id: I733fad06181439e12b1e71a4829b84e7b64e2468
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440595
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
These are no longer used by anything.
Change-Id: I0db6bc88e4dc945ff4f64df2ac410e1d00a669c1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/437601
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Let the application figure out how to close the
underlying block device after an init fails or
an initialized/loaded volume is closed/destroyed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id0b9b99c85ed13166ec9a229eaaa0b0eb04289fd
Reviewed-on: https://review.gerrithub.io/c/440573
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will remove the metadata from the associated backing
device and delete the pm_file associated with the reduce
volume.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I30ffd68e5ba69b31ee1be85418c5b8c592d82e70
Reviewed-on: https://review.gerrithub.io/c/437995
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The value passed comes directly from the spdk_reduce_vol structure,
meaning that we can't reference it after the associated volume
structure has been freed.
We'll need to reference this for the next patch that supports
destroy a compressed volume and unlinking the associated metadata
file.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7ec70972faaec52e405e8d51f4b645c6e623e9dc
Reviewed-on: https://review.gerrithub.io/c/437994
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This requires fixing up the unit test pmem emulation
code - we need to copy the 'persistent' buffer into
the newly 'mmaped' buffer in the pmem_map_file stub.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4e474f437922e652a57d0b45b6ef92fc713eb587
Reviewed-on: https://review.gerrithub.io/c/437888
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This can be done now that our DPDK submodule has been updated.
Change-Id: I3e17e5b28e04673f7644bfb47bf62b0a03ade9fe
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440425
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It is good to know what can be done using this tool.
Change-Id: I372d3c6f7c1bdd3dc89e45aadbcde2cc4e608d7d
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/434886
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
This patch rework all JSON config file reading tests. This is needed as
current approach will require to modify each test to re-launch SPDK
applications for each test type. This is hard to do because tests are
not flexible and will require to be rewritten almost from scratch. Not
metioning time to relaunch each test separatly.
Instead, just replace all old tests with one test. Launch only one
target and only one initiator. Then configure it using RPC calls. Then
config is dumped and target and initiator application is relaunched to
reread the configuration from file. Then config is dumped again and
compared.
Change-Id: Id857089aed0e6f2197cbf3ae625a4e9f4b13e8bb
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/432318
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
SPDK threads are no longer mapped 1:1 to system threads. They are
instead identified by the memory address of the spdk_thread object.
Change-Id: I417f8376cebd2ee94f624f4436e6394b51486063
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/437999
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib9de83db429e4ae6f8e0cc988ca161cebdb27c9c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/437599
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Check my_lba in gpt's primary header equals to LBA1.
Set correct my_lba in unit test to pass the test, and update
related header_crc32.
Change-Id: I124a7a883e9304bd3955ce3de6b589596c4195ea
Signed-off-by: lorneli <lorneli@163.com>
Reviewed-on: https://review.gerrithub.io/c/439889
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Appending string by using sprintf with realloc will be generally
usable and add sprintf_append_realloc() and vsprintf_append_realloc()
to the utility.
These APIs follow realloc about buffer management, i.e., the original
buffer is left untouched if they fail.
Besides, the original buffer is NULL, they are equivalent to
sprintf_alloc() and vsprintf_alloc(), respectively.
Change-Id: I8b69d9640e86e1862ddd3917995bad6f59426b7e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/436913
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Value of output field in subprocess.CalledProcessError exception
should be converted from 'bytes' to 'str' before write() operation.
Change-Id: I010c9ddd75302294853b2bab3db1bf013660a465
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440081
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Added -ffunction-sections / --gc-sections to allow the linker to remove
unused functions when linking test executables. This reduces the number
of required mock definitions to those actually required by tested code.
Change-Id: I22725ce82e22675a7c2d28c8227e586f2cd65023
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/436319
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Makes the code slightly more readable.
Change-Id: Iebf8fb07bceacf433d4bdad0a30419a3faab7eee
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439370
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Session struct will be now allocated inside the
`new_connection` rte_vhost callback. There can be
still only one connection per device, but this
change brings us one step towards supporting more.
Besides the obvious pointer changes, we'll now also
use the session pointer to check if the connection
actually exists. We used to set device vid to -1
when there was no connection but we no longer have
to do that.
Change-Id: I4d062c0b5f093fef132a6a2c9cc29458cbaad414
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/437776
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Because we have called _are_iovs_valid() to ensure that all blocks are
covered by iovec, and we process iovec compactly and orderly, so we
don't need to do _iov_iter_cont() check.
Since all callee are removed, so reomve definition of _iov_iter_cont()
as well.
While here, add an assertion in _iov_iter_advance() to detect
unexpected error.
Change-Id: I6b6077bafbf7ec18f14ee2835d3b99199b5e559b
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/c/439869
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
When all CPUs are set, formatted string overflows str buffer in the
spdk_cpuset structure with '\0'.
It may destroy CPUs bitmap when formatting is used, so additional
integrity checks are performed in UT.
Change-Id: I92ac790b2c215428cbe0ae89ab4b28570ddb9a0d
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440021
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
One of bugs wasn't catched because unit tests for util/cpuset wasn't
enabled.
This patch fixes bug and enables unit test.
Change-Id: I5a2d7ad76256439e3a13efc8ca51dd4b21a20e0a
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440020
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This patch adds core FTL (flash translation layer) submodules.
On regular SSDs the FTL is part of firmware, whereas Open Channel
enables moving it to the host and allows for having full controll
of data placement on the device.
Main functionalities added:
* logical to physical address map
* read / write buffer cache
* wear-leveling
* bad block management
Change-Id: I5c28aa277b212734bd4b1f71ae386b3d6f8c3715
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Signed-off-by: Jakub Radtke <jakub.radtke@intel.com>
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/431322
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The receive buffer and JSON values array are shared across all requests
on one connection. If RPC handlers deferre processing response, do the
lazy decode or capture JSON by pointer instead of copying it then
content of the request array might be overwritten by now. As we don't
have any requirement here we must assert that the received request is
valid till response is finished.
Fix this issue by copying request data and work on the copy. This change
also void the need of having JSON RPC 'id' field releasing over 128
bytes from each spdk_jsonrpc_request.
Change-Id: I665be446cbcd8f625e5a73514582efad3021a4ff
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/437160
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Connection close cb is called when connection is terminated or server is
shutting down.
Change-Id: Ia455bc5a72d690a4ace056c5a4141760381df678
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/436195
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This reverts commit e086dba5af. The
NVMe-oF lvol tests give us a unique view of the interaction between the
SPDK target and the kernel initiator. Switching to bdevperf may have
masked some issues.
Change-Id: Iac999997716188cf392e1d7eb96bbe4a64b9d8d7
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439190
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For separate metadata payload, Introduce a struct to collect DIF error
information and pass the reference to the struct to bit-flip error injection
and verification.
This change will make logging of DIF error and comparison between
injection and verification possible for separate metadata payload.
Merging this patch to the previous is possible but add this as a separate patch
to reduce the patch size.
Change-Id: Ifce2130e902bc090cbe205fa8df12559739ced57
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/435097
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This patch adds APIs to generate and verify DIF for SGL
payload with separate metadata as byte alignment and granularity.
Change-Id: I4e553c9b6f8c96e576a69115002963d32379d439
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/434150
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For copied extended LBA payload, Introduce a struct to collect DIF error
information and pass the reference to the struct to bit-flip error injection
and verification.
This change will make logging of DIF error and comparison between
injection and verification possible for copied extended LBA payload.
Merging this patch to the previous is possible but add this as a separate patch
to reduce the patch size.
Change-Id: I9f7ac1332fe63cb206c692d0876c8de41ef9286f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/435227
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds APIs to copy data and generate and verify DIF
for internally created extended LBA payload.
This patch is for read strip and write insert operation to make
DIF transparent to the upper layer.
Change-Id: I025f35571490aa197aac5e7572549e31c2479b41
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/432987
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Introduce a struct to collect DIF error information and pass
the reference to the struct to bit-flip error injection and
verification.
This change will make logging of DIF error and comparison between
injection and verification possible.
Change-Id: I43941f1a7f4b0ad1e8ff324f2ac8fad9e195a100
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/438023
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This is useful for proving to scan-build that we are not using a mocked
function. Sometimes it needs to be called repeatedly every time any mock
variables are called.
Change-Id: Id0ef196620c2984252f792a7e40162e10b989748
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/437997
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
It is probably best to clear the pointers to global memory when those
pointers are no longer valid. It also helps make the unittest a little
bit clearer.
Change-Id: I73f9568f40ba8bff63f4e3346c83a48766f26129
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/437991
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This follows the same trend as the mem_map APIs.
Currently, most of the spdk_vtophys() callers manually
detect physically noncontiguous buffers to split them
into multiple physically contiguous chunks. This patch
is a first step towards encapsulating most of that logic
in a single place - in spdk_vtophys() itself.
This patch doesn't change any functionality on its own,
it only extends the API.
Change-Id: I16faa9dea270c370f2a814cd399f59055b5ccc3d
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/438449
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The vtophys tests are about to be expanded with extra
cases, for which CU_ASSERT macros will come useful.
Change-Id: Id52e8df5e4bb2a0d842c174e5ac2969cc9dbbaee
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/438448
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
spdk_mem_map_translate() will no longer update its
translation size parameter to a value that's bigger
than requested. This will be handy once we introduce
a similar translation length parameter to spdk_vtophys().
Change-Id: Ia662cd3f1340c57a3341182fa0e8137163084779
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/438447
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Patch of adding spdk_env_dpdk_post_init failed in Chandler
test pool on contos7_2 machine using a packaged DPDK.
It's DPDK 17.11 which needs an explicit inclusion of
rte_config.h.
Change-Id: I017108aeb04c38063118ea37957ef971fc602fff
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439598
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Based on requirement of initializing SPDK env
from a DPDK application, relative to spdk_env_init,
add spdk_env_dpdk_post_init for calling after rte_env_init.
More details, visit
https://github.com/spdk/spdk/issues/529
Change-Id: I6fda1593e0296ef93b705e31cc76bcd0d248673a
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/437225
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Github issue #544 was detected by ip_migration test. ip_migration
test consumes 26 seconds to completion, and not so long.
To avoid degradation, move ip_migration test from nightly to
per patch.
Change-Id: Ie11a9a1e9a82518133d619d48e1a1502074c99f6
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/438229
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Modifed scripts/detect_cc.sh to take additional parameter specifing
the linker to use. Default to LLD on FreeBSD systems.
Change-Id: Idf97e9676a144028c0803d272ae6f0e903b0dd1f
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/438801
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch reduces the number of parameters of APIs by setting
necessary information to context struct and pass it to APIs.
This will simplify the code and will clarify the core logic.
Besides, by introducing context data, update of reference tag
is further consolidated.
Change-Id: I1b3eec596847eb4ef1cf43441035df21f746192a
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/438021
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The case that metadata is supported but DIF is not enabled was
handled as error. But the case is described as an normal case
in NVMe specification.
This patch changes the case to normal.
Besides a break was missing and added in this patch.
Change-Id: I784c36fed3b92da9ae5500d945f1dc20a2ca406b
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/438362
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We do not want to present those subsystems which are not
ready.
Change-Id: I7f5c171fbac4c31d839421e37e93e62569c0e87a
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/437222
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We already have the memory set for the stub process. If we set this
value, and the memory size set by the stub is changed. We will
cause the issue. So removing this option will be save.
Change-Id: I1968f5253796e766a8f1bb95f18554b0003a2969
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/438231
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
sshpass used in test/nvme/hotplug.sh test but not present
in vm_setup.sh dependencies.
Change-Id: Ic9d7f137f7694e5318f6f412b1e7a73536a82f8c
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/438788
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Since division is more expensive than right shift operator, in
function spdk_bdev_bytes_to_blocks, use right shift instead of
division if the blocklen of bdev is a power of two.
Change-Id: Ib3dbc792e86582bba30b3dc028efbd12c69075ba
Signed-off-by: lorneli <lorneli@163.com>
Reviewed-on: https://review.gerrithub.io/438318
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The scan-build error this fixes assumes that we do not reallocate an
iov_base for the g_bdev_io object in between calls to
_crypto_opration_complete. So I explicitly tell it that's what we are
doing.
Change-Id: Ie15c517ea60a2a527a0520005cb044ab2ba4412e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/437988
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
This will enable us to fail all outstanding I/O when disconnecting an
NVMe-oF qpair.
Change-Id: I84190a19da23ef2d88d9fc26e25b33bd0f364b0c
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/432211
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Keep run_test inside a designated file instead of
calling them directly in autotest.sh
In similar way how nvmf and iscsi scripts are composed.
Change-Id: I19f70678a85b5764d34808f8f7a9e735556474f9
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/421232
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Each connection is created with the `new_connection`
rte_vhost callback with a unique vid parameter. Storing
the vid inside the device struct was sufficient until
we wanted to have multiple connections per device.
Change-Id: Ic730d3377e1410499bdc163ce961863c530b880d
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/437775
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Grouped a few spdk_vhost_dev struct fields into a new
struct spdk_vhost_session. A session will represent the
connection between SPDK vhost device (vhost-user slave)
and QEMU (vhost-user master).
This essentially serves two purposes. The first is to
allow multiple simultaneous connections to a single
vhost device. Each connection (session) will have access
to the same storage, but will use separate virtqueues,
separate features and possibly different memory. For
Vhost-SCSI, this could be used together with the upcoming
SCSI reservations feature.
The other purpose is to untie devices from lcores and tie
sessions instead. This will potentially allow us to modify
the device struct from any thread, meaning we'll be able
to get rid of the external events API and simplify a lot
of the code that manages vhost - vhost RPC for instance.
Device backends themselves would be responsible for
propagating all device events to each session, but it could
be completely transparent to the upper layers.
Change-Id: I39984cc0a3ae2e76e0817d48fdaa5f43d3339607
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/437774
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Previously, we allocate the buffer size according
to the MaxQueueDepth info, however this is not exactly
a good way for customers to configure, we should provided
a shared buffer number configuration for the transport.
Change-Id: Ic6ff83076a65e77ec7376688ffb3737fd899057c
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/437450
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For DIF and DIX, read strip and write insert operation will copy
data together with DIF generation and verification.
This patch adds spdk_crc16_t10dif_copy for those cases.
Change-Id: I9a77fa8b367486fe0b6704d58dcdf95d5210c875
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/437461
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch adds APIs to inject bit flip error into any field
of the extended LBA payload.
Change-Id: I3ca601999e55ea6228bb525ac8c0744c7df32398
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/434292
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Introducing helper functions will simplify a little complex
implementation.
Change-Id: I94911497b8aecc0ffbd148519ce22501ef69c79d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/435387
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
DIF and DIX will be supported in SPDK throughout, e.g., NVMe
driver, NVMe-oF initiator and target, NVMe block device, malloc
block device, SCSI, iSCSI target, FIO plugin, and Perf.
Generic and common APIs to generate and verify DIF and inject
bit flip error to any field will be helpful for them.
This patch is the first in the patch series.
This patch adds APIs to generate and verify DIF for SGL extended
LBA payload as byte alignement and granularity.
Change-Id: Ie6588d960113761f10efbf2d2a3cae004af37ce8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/432261
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This allows us to specify the host-side configuration for each
controller to which we connect.
Change-Id: Iac2aed3934d4a326f45546f2f541e374308e2589
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/436219
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add stop.sh before start.sh,to avoid reporting resource busy
it could lead to start failed.
Change-Id: I1756adaad31937a7a4b95fdc488f2334360d4ac2
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/437616
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Use the default thread implementation instead.
Change-Id: I844b02ba3c45d323e9f16b328a31b9d38dc8f754
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/422466
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This allows us to call it during test set up instead of
only within a unit test.
Change-Id: I2daae8d630729b5e0712057766a3cba8812109e9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/437479
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is the callback type used for message passing. The
old name is easy to confuse with the callback to pass
a message to a thread or the upcoming callback to
spawn a thread.
Change-Id: I5fd63b57c4be2a4262a197850e6de4901be03ee7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/435941
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add init_crc parameter as seed value to spdk_crc16_t10dif API to generate
a CRC value spanning multiple separate buffers.
This will be necessary for upcoming DIF/DIX patches.
Having init_crc parameter is general, and so change the existing API
without adding seed version of the existing API.
Change-Id: I0ac7919b18013967e41829dcedd3e4e73204d5d6
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/437204
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch removes the "sshpass -p intel" from the test logs. This
trips up security analysis tools which flag it (falsely) as a leaked
password.
Change-Id: Id8e470561429821e320cdf185c43204938110c75
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/436891
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This makes the timeout check for each qpair in the group
efficient. If there are many qpairs in the group, we
can scale.
Change-Id: I75c29a92107dc32377a2ef7edb5ac92868f1c5df
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/435277
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: Ia73e950c746fb23f1188dc09a4a34c8ba5f97985
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/436680
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Remove the unnessary fields in spdk_nvmf_tcp_transport
Change-Id: I632608ba654b30f3511f5e1d925c6743c9100365
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/437271
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Now trace facility can be enabled/disabled at runtime,
besides app starting parameters
Change-Id: I086564665ba4375b946a5339d5921d6584e9bfda
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/435470
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When last clone of a snapshot is being deleted
we remove that snapshot from snapshots list.
We should not do that as it still works as a
snapshot and it is read-only, but it does not list
as a snpashot from get_bdevs. Instead remove snapshot
entry from the list when blob that represents that
snapshot is being removed.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I8d76229567fb0d9f15d29bad3fd94b9813249604
Reviewed-on: https://review.gerrithub.io/436971
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We can still use 4GB for nightly testing, but cutting
the cache size to 2GB reduces the setup time for each
of the 5 db_bench test runs.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic946cfcd2ecac209e0e06b05777c18ccdec50d14
Reviewed-on: https://review.gerrithub.io/436564
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This more closely matches the sequence of events
a user will take in creating a compressed volume.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2311aed49e2a623feb9c5fbdbd25fb3201aeeeb5
Reviewed-on: https://review.gerrithub.io/436065
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Parameterize the existing unit tests to maximize
code reuse.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaa6b1bd52ad48ad4c19f6e6419e3e669b2d61e56
Reviewed-on: https://review.gerrithub.io/434117
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For write operations, copy data to req->buf and write
to disk.
If chunk already specified in logical map, read the
chunk first into req->buf, and overwrite with data
specified by the write operation.
If chunk not specified in logical map, fill logical
blocks not specified by the write operation with
zeroes.
For read operations, read chunk into req->buf first,
then copy relevant data into the buffers specified
by the read operations.
These operations are all functional, but have room
for future improvement. For example, this patch
will issue a separate backing read/write operations
for each backing block in the chunk - this could be
optimized to coalesce operations where the backing
blocks are contiguous.
While here, clean up freeing bufspace in one of
the error paths - this needs to be freed using
spdk_dma_free instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6dbf4fc9a8fdf0f5424b1f1f9178c79891c96d0d
Reviewed-on: https://review.gerrithub.io/434116
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Focus of this patch is adding the foundations of manipulating
the chunk_map and backing_block bit arrays and persisting
chunk maps and the logical map to the pm_file.
No data is writting the backing device yet. That will come
in later patches. This also does not rebuild the bit arrays
from the pm_file during spdk_reduce_vol_load - that will also come
in a later patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib5336dbe907c253e545704471de8c4e812bbc157
Reviewed-on: https://review.gerrithub.io/434115
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
ziperrno was left over from earlier versions of this
patch set that used "sbzip" instead of "reduce".
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4159141b92727bb0a24db5f9aefcccaadc360d9e
Reviewed-on: https://review.gerrithub.io/436399
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: I19bfc17636e0bf36d5a26e18ab2650ea6026f3a0
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/437043
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: Jim Harris <james.r.harris@intel.com>
Same as 29be88f (test/blob: always use SPDK_BS_PAGE_SIZE instead of
PAGE_SIZE), ARM system could not find defination of PAGE_SIZE when
building nvme_ns_ocssd_cmd_ut.c., we use OCSSD_SECTOR_SIZE instead of
Page_SIZE here, also use OCSSD_SECTOR_SIZE instead of "0x1000" for const
uint32_t sector_size.
Change-Id: Ib3062232e44b0be26ade7c64340918f2f23ada03
Signed-off-by: Liang Yan <lyan@suse.com>
Reviewed-on: https://review.gerrithub.io/430802
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It is the initial patch to add the unit test for
NVMe-oF TCP transport.
Change-Id: Ia8c90a205fc78dd817f91675337ca81021211155
Signed-off-by: Yanbo Zhou <yanbo.zhou@intel.com>
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/426175
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This removes a ton of duplicate from a lot of
Makefiles. Note that spdk.unittest.mk still keeps
its own app rules, and now just includes
spdk.app_vars.mk instead. Fixing Makefiles that
include this .mk file requires more work that is
deferred for now. We do need to add the
"install: all" rule explicitly to this .mk files.
Note that Makefiles need to include spdk.app.mk
now at the end of the file, so that things like
APP and SPDK_LIB_LIST are defined before including
it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If6823cda135180c37690ffc96c91660b7f0718e3
Reviewed-on: https://review.gerrithub.io/434283
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This Makefile doesn't depend on anything in spdk.app.mk,
and provides its own rules that are different than any
of the other applications (including unit tests).
The exception here is the simple "install : app" rule.
Just add that rule to the cpp_headers Makefile instead
of including spdk.app.mk just for that rule.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I684dfba9108dfa7f06d7eb4acecd6806e5797312
Reviewed-on: https://review.gerrithub.io/434282
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Much of this was originally applied by Darek in
6f5840d22 but then had to be reverted due to NVMe-oF
MR issues in a817ccf5. Now that the NVMe-oF MR issues
have been resolved, we can reapply these changes.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Change-Id: I58d603523901c78dbc81279078a09b2a24c091e6
Reviewed-on: https://review.gerrithub.io/436547
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
spdk.unittest.mk includes spdk.app.mk, but some unit test
Makefiles include both spdk.unittest.mk and spdk.app.mk,
meaning spdk.app.mk gets included twice. Fix that.
This hasn't been an issue because spdk.app.mk currently
only includes variables - but no rules.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I23d39e8084f79442fb06ae9b5a6a68d6134adff4
Reviewed-on: https://review.gerrithub.io/434281
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This can just be replaced with ENV_LIBS - similar
to other application Makefiles.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icad14e6f74264389972c7798aac493e584f7c8c3
Reviewed-on: https://review.gerrithub.io/434280
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For split SCSI read command, if there is any failure in the sequence of
it, the first error must be propagated to all subtasks of it.
For split SCSI write command, if there is any failure in the sequence
of it, the first error must be propagated to the primary subtask.
Before this patch,
for read task:
- any failure is propagated to already completed subtasks, but
is not propagated to any subtasks not completed yet, and
- if any failure occurs in non-primary subtasks, it is not propagated
to the primary subtask.
for write task:
- if the primary subtask completes after any failure of non-primary
subtasks, the failure will be overwritten by the success of the
primary task.
This patch fixes these issues.
Change-Id: I2d878798cbb40a8c5bd6a6fe5efb32b8de4a8ecd
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/436673
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This direct call of LUN reset has caused unexpected behavior
during heavy stress test.
Apply correct LUN reset handling for this case too.
Even if there are multiple LUNs, LUN resets are serialized in
the SCSI layer by previous patches and parallel calls of LUN resets
will not cause any issue.
Change-Id: I920e2864ef0fb41c6bd2b6153ef3caff6876e893
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/436115
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
remove from the list test cases from rocksdb.sh
add vhost live migration tc1 and tc2
Change-Id: I2e7beff62e9c54ea86481832c29c613357e19c99
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/429480
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Discover commands previously blindly used the nvmf_req->data structure.
This only works if the entire command fits in a single contiguous
buffer. commit 1d9be84bfd changed the default buffer size such that
this would become a problem for as few as 8 subsystems.
Fixes github issue 525
This change may also help prevent data corruption as we were copying up
to nvmf_req->length data into the buffer. For requests with multiple
data buffers this can cause us to copy off the end of that buffer.
Change-Id: I788259da988b2458f57ee2795e1c5d3ced8803dd
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/435544
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Fix vhost nightly test with Split NVMe bdevs, Raid Bdevs and
vhost blk controllers.
Bdev arguments for case with blk controller were not updated.
Change-Id: Ieba05a5e5a4a5fc2d424b3fb36d7156ef81db0e8
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/436490
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Use Qemu v.3.0.0 from spdk/qemu.
Change-Id: I44ecdac5f591a6096ec8450dd70044a7ba6628e0
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/436476
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
pthread_join() expect pointer to 'void *' which is 8 byte long but gets
pointer to 'int' which is 4 byte long.
Bug introduced in:
e6c30818e3 ("test: don't use bdev_svc application in this test")
Fixes#533
Change-Id: Icaa35c5acec5ad9aebfb92e05b113c4275624db4
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/436309
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is for ABORT TASK SET and LUN RESET.
iSCSI layer doesn't have pending queue and hence if the target task
is read task and is queued in queued_datain_tasks, it must be
aborted before submitting ABORT TASK to SCSI layer.
Aborting the target task may not complete by an iteration because
submitted read tasks are limited. Hence use poller to complete abortion
by repetition.
Change-Id: Idabf4931d751ee698e9809eafd5c151b979f048b
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/436077
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
By up to the previous patch in the patch series, unexpected behavior
due to write tasks in task management commands have been fixed.
But unexpected behavior due to read tasks in task management commands
have been still observed.
Remaining patches in the patch series will fix the unexpected behavior
due to read tasks in task management commands.
This patch is for ABORT TASK.
ABORT TASK is not supported in SCSI layer yet. But the initiator
doesn't care about the failure is due to not-supported or failure.
It must be avoided that the task management command returns SCSI Good
but some tasks are not aborted and return SCSI Good later. On the other
hand, it is acceptable that the task management command returns
failure but some tasks are partially aborted.
Hence this patch adds operation without checking the support status
in SCSI layer.
iSCSI layer doesn't have pending queue and hence if the target task
is read task and is queued in queued_datain_tasks, it must be
aborted before submitting ABORT TASK to SCSI layer.
Aborting the target task may not complete by an iteration because
submitted read tasks are limited. Hence use poller to complete abortion
by repetition.
Change-Id: I030a8b2f19c2f7c7d2f7b0b2c633579534db631b
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/436076
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
By subsequent patches for iSCSI, spdk_scsi_dev_queue_mgmt_task()
will not be called directly from the function that knows TMF code,
and currently setting TMF code to SCSI task is done in
spdk_scsi_dev_queue_mgmt_task().
Hence after subsequent patches for iSCSI, to hand off TMF code to
SCSI task, any dynamic context will be required.
To avoid the dynamic context, extract setting TMF code from
spdk_scsi_dev_queue_mgmt_task() and put appropriate place for
each call of spdk_scsi_dev_queue_mgmt_task().
Additionally, in spdk_abort_transfer_task_in_task_mgmt_resp(),
ref_task_tag is got from PDU but getting it from SCSI task is
much easier. Hence get ref_task_tag from SCSI task in the callback.
Change-Id: I7add9290598d2df7cfcf1506ec75d74c70c0f236
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/436643
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch tests the following:
- Reset task will not complete until prior IO tasks complete.
- IO tasks will suspend until prior reset tasks complete.
Change-Id: I8ae27874e7eb34f866bbd4e057ee5d8c27d040e8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/435433
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
IO submissions to backends have to complete first in LUN reset.
Previous patch makes the waiting time limited.
LUN reset don't use timeout for now because even if LUN reset reports
timeout, error handling of the initiator will be escalated and the
initiator will issue stronger command and will wait eventually
until all outstanding tasks completed.
Besides, not using timeout in LUN reset will make implementation simple.
If timeout becomes necessary, I'll do it in the separate patch later.
Change-Id: Ie9e4502068c19b1727ea65dc773ddf08cedec7c4
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/434766
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Submission queue deleted by https://review.gerrithub.io/393911
is necessary to support proper LUN reset.
Hence revert the removal in this patch.
And using the submission queue, suspend IO task submission during
LUN reset to limit completion time of LUN reset.
Change-Id: I3cdc4f0165fe845637112c2900407d6b4a09df79
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/434765
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Task management functions don't require performance. Serializing
execution of task managment functions will sipmlify and stabilize
the logic and will be helpful for upcoming patches to support
other task management functions.
This patch introduces two queues, pending and submitted queue,
and serializes LUN reset exection and makes LUN hot removal
wait for LUN reset.
Besides, checking if LUN is NULL is moved to the upper layer as
same as IO task submission.
Change-Id: Ia0cf3f437a745ee70fc9b17744cc63c833690dda
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/434764
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Having unlimited size core dumps is not a good idea on a lot of
machines. Modify it to 5GB.
Change-Id: I1d52bfa9f2450e2d8f824c3b86aa2ad5fe4579c3
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/436412
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Use nvmf_tgt for nvmf tests.
Use iscsi_tgt for spdkcli iscsi tests.
Use vhost target for spdkcli vhost tests.
Fixes#511.
Change-Id: I5f084bccf87d32b0ede210c62ccc4a2f7926d716
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/435139
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a more difficult case to handle than killing with I/O
outstanding because the target gets no notification that the
connection went away. Effectively, this tests that keep alive
is working correctly.
Change-Id: I5bccea8bc51de6d1d2d40c2648ad7c40cce2c281
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/433360
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
As a part of cleanup they're replaced by a device-agnostic
attach API, which is easier for us to manage.
Change-Id: I2ec68f20ba209f02ee5c2de4b6fe5330a4bc0853
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/436480
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
As a part of cleanup they're replaced by a device-agnostic
attach API, which is easier for us to manage.
Change-Id: Ia92bd8f4525712bd27ade16ead67435c5e0fbe7a
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/436479
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
As a part of cleanup they're replaced by a device-agnostic
attach API, which is easier for us to manage.
Change-Id: I7558590e41e5c580a130a6aba7ae4f7dcff58da8
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/436478
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently, SPDK can support bandwidth limiting. So add bandwidth
test cases into the qos.sh.
Change-Id: I85930506b296d6a94bd7dbb101a34ef804cd100e
Signed-off-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-on: https://review.gerrithub.io/432141
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch enables non blocking mode in RPC client. Requests are send
and received during spdk_jsonrpc_client_poll.
Change-Id: I5089737b2407055d3eeddb5e2ab0946d74e43c6a
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/430095
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Pass many spdkcli commands to spdkcli_job.py
Change-Id: I0cf5840fdf7183febff1872c7fc8d1cb303a06f1
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/435891
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Current SPDK SCSI supports only LUN RESET in task management function.
Upcoming patches will support other functions too but differentiate
the callback function about LUN reset from other task management
functions for now to avoid misunderstanding.
Change-Id: If8f00ce413fbcc54b12dd885cbf01597f83a2af9
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/434763
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a preparation to the next patch.
Change-Id: Ia7af66ba129a4666730f94be64d3699cded65e09
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/434762
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
As described in RFC3720, task management request will act on all
the commands from the same session having a CmdSN lower than the
task management CmdSN.
Current implementation clears all R2T tasks without checking CmdSN.
This patch changes the implementation to clear only R2T tasks
whose CmdSN is smaller than the task management request.
Additionally this patch adds to UT code to verify the change works
as expected.
Change-Id: I0b368cb13741bc05259924d27793438e9250b951
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/434761
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For tests that aren't specifically testing the thread API,
leverage the ut_multithread framework to simplify them.
Change-Id: Ib772ac4ebd3179b71a51697edc50ad9b7b70536b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/435938
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Allows us to run them independent from autotest
Change-Id: I59843fb3e089494be32fd7aa47cad5439f2732c0
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/435937
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There appear to be issues around using dynamic memory allocation with
secondary processes and local NVMe drives. This change allows us to keep
running the NVMe-oF physical tests while we debug the root cause of the
issue.
Change-Id: I2fdbac9878c3e19e6ef0bcef1aa301b7062dc0bf
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/435942
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add a test with a hooked PCI device that redirects
all PCI config reads and writes to a local buffer.
Change-Id: I86fb847a50a3d33ab20dcb1a8158a76e68843f6e
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/435803
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
libpmem only allows passing a size when CREATE flag
is set.
This requires some updates in the unit test stubs
for pmem_map_file as well. While here, do some
additional cleanup and add a g_volatile_pm_buf_len to
track the size of the allocated volatile pm buffer.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib9fe58fd9946161dd20bb8391be2e9680705ab22
Reviewed-on: https://review.gerrithub.io/435945
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Python3 Exception don't have 'message' attribute so need to add it in
RpcException class.
This attribute has beed dropped in pep-0352. We should switch to str(e)
instead in other places too.
Change-Id: I610696b9e374e11ffa95327af6a10c6874915022
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/435506
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Apparently there's a data race with the setup.sh script,
that may unbind the PCI device before the mount is visible.
Change-Id: I71a349a10a74e29405e3537c513f284acfbd39fb
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/435259
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In case the process we are waiting for fail to start
listening on RPC socket the test script will stuck till the build times
out. Fix this by adding 20s timeout and 0.5s sleep in the while
loop.
For systems where there is no ip command and netstat output is missing
'Status' column for Unix sockets (like FreeBSD) call the get_rpc_methods
RPC command to check if process is listening.
Change-Id: Ia8b06af7875b65a7fd8be65cf55e92881f6f95db
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/433102
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We are too verbose in many places. Some scripts don't want to be traced
all the way, instad they enable tracing only for some parts and
autotest_common.sh just do 'set -x' in many places.
This patch save 'x' flag on function enter and restore it at exit.
Change-Id: I39b3d3dd3f711e1131e476f9d322d9e1b097ad12
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/432604
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Includes tests for the parse_sgl function.
Change-Id: I83a854598c7320b31b75a4fa5ebbfe66cb708b6d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/429070
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This makes it correctly wait until the bdevperf test has started
running prior to starting the sleep to allow I/O to begin.
Change-Id: Ia6c004ede1854e836479dd3a0707a91551f954bc
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/433359
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will be the logical block size presented by the
compressed volume to differ from the backing device's
block size.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie4ef06e131d8e101a0c9ced228c56a02fcbfb7af
Reviewed-on: https://review.gerrithub.io/434113
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We will keep the RPCs for now but mark them deprecated.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0407dcb392ea0c9e89c0f26cd5670aed2dbfadef
Reviewed-on: https://review.gerrithub.io/435345
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I90e7d698cae7577736319e38f089e3b759c9beef
Reviewed-on: https://review.gerrithub.io/435343
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
"trace" is for event tracing. SPDK used to use this
term for logging - we've moved some APIs to use "log"
but more needs to be changed. So start that now.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib732c57d01602e56f37e9deed7135840a7c005be
Reviewed-on: https://review.gerrithub.io/435342
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Not all bdevs have uuid attribute.
Fixes#510.
Change-Id: Ie3055563c8b88c002b5af45eb528ffbef5ec2166
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/435466
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
1. Use the Raid-0 bdev which based two Malloc bdevs to run
the fio test.
2. Use the Raid-0 bdev which based one Nvme bdev and one
malloc bdev to run fio test.
3. Creating lvol store on device Raid-0 which is based on
two Malloc bdevs.
Change-Id: I3fb5e5d8e445a236a6a4e8c198a6f54a1f488989
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/425546
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
We assumed spdk_mem_map_translate() translates only 2MB-aligned
addresses, but that's not true. Both vtophys and NVMf can use it
with any user-provided address and that breaks our contiguous memory
length calculations. Right now each buffer appeared to have the
first n * 2MB of memory always contiguous.
This is a bugfix for NVMf which does check the mapping length
internally. It will also become handy when adding the similar
functionality to spdk_vtophys().
Change-Id: I3bc8e0b2b8d203cb90320a79264effb7ea7037a7
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/433076
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
NVMf target can't support extended LBA format for now, so print a
error log for those NVMe backend devices with extended LBA format.
Fix the issue #497.
Change-Id: Idda76ba934dd0eb45f92ae22b0b71398b3ae69dd
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/432799
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Considering it's the part base object that's now accessible
in its remove callback, we can simplify the part API by making
it accept the part base object directly.
Change-Id: I87c3278929a063c115828d02e0def7fa536e6682
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/434835
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Application Makefiles can now just add xx_MODULES_LIB_LIST
to SPDK_LIB_LIST. This is possible now since all
SPDK libraries are linked with --whole-archive, so there
is no need to differentiate between "modules" libraries
and other SPDK libraries.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iabf81a388b72d3b2a2f48287a8491ddc977722ac
Reviewed-on: https://review.gerrithub.io/434277
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This allows a lot of simplification to SPDK application
makefiles.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5fa463f6369834b84a8d92e79fa7768082209d7a
Reviewed-on: https://review.gerrithub.io/434274
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There were several applications that were missing
either SOCK_MODULES_LINKER_ARGS or COPY_MODULES_LINKER_ARGS.
For the ones missing SOCK_MODULES_LINKER_ARGS (fuse and rocksdb),
the nvme inititator with TCP transport would not have worked
at all.
Adding COPY_MODULES_LINKER_ARGS to the bdev fio plugin enables
ioat which isn't critical, but adding it makes it consistent
with other apps and will allow its Makefile to be simplified in
some future patches.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0098350d75d27ad2b2d408221b727698f5e902e4
Reviewed-on: https://review.gerrithub.io/434260
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This allows us to remove $(ENV_LINKER_ARGS) from all of the
application Makefiles.
Modify spdk.unittest.mk to explicitly set ENV_LINKER_ARGS
to nothing, to avoid DPDK libraries from getting linked
into unit tests. This seems better than creating separate
LINK_C rules for unit tests. Provide a UNIT_TEST_LINK_ENV
flag to allow select unit tests to override this behavior -
it's needed for some of the env unit tests.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I647f2c848cf434023cf5a1f3a45869bbc4fc8102
Reviewed-on: https://review.gerrithub.io/434145
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Unit tests shouldn't link in DPDK env libraries - they
should all use the test_env.c
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib08ae33224ed9a12fa1ff255c4769a005fc10369
Reviewed-on: https://review.gerrithub.io/434259
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The various *_MODULES_LIST are intended for the modules
that implement the specific interface - not for the
associated core library itself.
For example, BLOCKDEV_MODULES_LIST doesn't contain bdev,
it contains all of the bdev modules. Similar for
COPY_MODULES_LIST and copy.
So make SOCK_MODULES_LIST consistent. This is a real
pain because we have to add sock explicitly to a bunch
of individual Makefiles, but I have plans to clean that
up in some future patches.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0d293372cfb38bfa46c8478a8d9ca9ce23924747
Reviewed-on: https://review.gerrithub.io/434125
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
For some old Linux Guest kernels, the new NVMe 1.3 feature: shadow
doorbell buffer is not enabled, while here, make a dummy BAR region
inside slave target, when Guest submits a new request, the doorbell
value will be write to the shared memory between Guest and vhost
target, so that the existing vhost target can support both new
Linux Guest kernel(newer than 4.12) and old Guest kernel.
Also, the shared BAR space can be used in future which we can move
ADMIN queue processing into SPDK vhost target, with this feature,
the QEMU driver will become very small and easy for upstreaming.
Change-Id: I9463e9f13421368f43bfe4076facddd119f4552e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/419157
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Initial implmentation had a 1:1 session to crypto op ratio. After
working with a similar concept in CompressDev checked to see if
this was required and apparently it is not.
Saves a decent number of API calls per crypto op and in the poller.
Also saves on mempool usage. Performance improvement measurement
is WIP.
Change-Id: I73f2355e720a16fd46bc4a02657419f779f07cbb
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/433726
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
This helps avoid issues with nbd not being ready when
we need it.
Still keep various "modprobe nbd" in different test
files - this ensures these test files can still be
run in isolation. But remove the various "rmmod nbd"
to ensure that nbd always stays loaded. There is no
harm in just keeping nbd loaded all the time.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3597ff1f7ac53162c33a0384a33f33776cf6f182
Reviewed-on: https://review.gerrithub.io/434838
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This is the first patch to enable the automated perf
test with TCP transport, which is used to guard the
correctness of the TCP transport related code.
Change-Id: Ic3df3aeae6df2024e22e50be70c7c61e36f85243
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/425699
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Also remove the discovery auth group from the json file,
and use RPC to set it instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I597b60a7c7e4de9d7e1719b0145ab2b11c6f26b0
Reviewed-on: https://review.gerrithub.io/434265
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This workaround is needed to stop EBUSY errors from NBD ioctls(). This
can be fixed in NBD bdev code but till that point lets merge this
workaround.
Change-Id: Ic1546963538beda4d4409cef93062103e2a23e34
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/434040
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This will make future changes to the threading model
easier.
Change-Id: I4abfe0850648a0f7449804066d4a02823393e4a6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/433680
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Purpose: prepare to add the TCP transport test.
Change-Id: I5dd2acabb9259b7a85919ab2dca41eacf9dee913
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/433964
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will make the conversion to the new threading library
easier later on.
Change-Id: Ie7358e89128f28080a986e12cd014de7df4752e4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/433679
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
In addition UT were changed to set_thread() before registering
io device.
Change-Id: I959dbc800db9c1f50564274a73d71e05e843d8c9
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/433611
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
A pm file consists of:
* volume metadata
* logical map
* chunk maps
Define all three of these in struct spdk_reduce_vol.
Also define -1ULL to denote an empty entry in the logical
map or a chunk map - and initialize the logical map
and chunk maps entirely with this value when initializing
a new compressed volume.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9aae23c73d2fbbdc72050ab103fe9e686907eb40
Reviewed-on: https://review.gerrithub.io/433490
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Currently the API requires the caller to open the
pmem file and pass the mapped buffer pointer, length
and pmem flag to libreduce using the spdk_reduce_pm_file
structure.
Let's have the library just do the pmem_map_file() instead.
Users then just pass the path to create the pmem file. The
library will still use the spdk_reduce_pm_file structure
internally - so move its definition out of the public header
and into reduce.c.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I81fcbfdfbb3211dca016d6aa422cf2e1ab16d84d
Reviewed-on: https://review.gerrithub.io/432593
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It is the first patch to follow the NVMe over fabrics
spec and implmenent the NVMe/TCP transport. It can be
divided into work in the host and target sides:
Host side: Add the TCP/IP transport in nvme lib (lib/nvme).
Target side: Add the TCP/IP transport in nvmf lib (lib/nvmf).
Change-Id: Idc4f93750df676354f6c2ea8ecdb234e3638fd44
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/425191
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
bdev_svc require system setup (like bdevs, nvme etc.) otherwise it
writes tons of errors. Instead just start RPC server on separate thread
and connect to it.
Change-Id: I99ee58cbccbf982d70155c8ecf0fd7f860b3b6ab
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/430316
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
As preparation for non blocking mode make the
spdk_jsonrpc_client_send_request functon just queue the request. Then in
spdk_jsonrpc_client_recv_response we actually send it. Without this
change send function will stay blocking.
Change-Id: Ida2290696d78afcb06d84a4538b74e2311043911
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/429910
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Use JSON RPC instead of config file to configure CHAP secret.
Change-Id: Iecaa3eed00fd1b0c25d46693c4ebc04973970f6f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/433205
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Port the config file used in the FIO test from .INI to JSON.
Besides, set_bdev_nvme_hotplug RPC cannot be used easily because
the iSCSI target is not the primary process in the FIO test.
The FIO test doesn't use the hotplug feature and hence remove
enabling hotplug simply.
Change-Id: Idf8809aa829b67a7028f6fa4778a7aae1b431bb8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/433223
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Currently there are no timeout mechanism for Admin commands
when initialization, the NVMe driver may enter infinite loop.
While here, add a new parameter to the controller initialization
options, NVMe controller will report an error when timeout
happens during initialization.
Change-Id: Id0c6b6fa15abe5227b486bee95c8e02914b0d358
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/424622
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
blob and blob_bdev are already included via the lvol bdev module
dependencies in mk/spdk.modules.mk. This patch adds blobfs there
too.
These changes are needed for some upcoming patches which will
apply --whole-archive to all libraries linked into the application.
That patch will require that we never include the same library
twice.
Shared library builds *require* that blobfs be listed before
blob on the link line, hence adding blobfs here even though it's
not technically associated with a bdev module.
We can also simplify spdk.modules.mk while we're here - just
filter out bdev_lvol to disable lvol for applications like
blob_cli that need to disable it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I01e5e6b91d947463749f942f54c12f48229bbe5a
Reviewed-on: https://review.gerrithub.io/432916
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I36eed5fdd593eb3df15859a3e29c600be0913899
Reviewed-on: https://review.gerrithub.io/432559
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
No longer override the send_msg implementation.
This updates ut_multithread.c, which has minor ripple
effects into bdev_ut.c. But that unit test is otherwise
unchanged.
Change-Id: I2fd30a1010bdff0a810d376d985ab1b8a2b22fb9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/424262
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The timing flags in virtio.sh were configured improperly and were
preventing the timing graph from generating. Also, the vhost initiator
tests should be reported under the same timing flag.
Change-Id: I2a4b755ba98c2064e64e38609936d2f5144464cb
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/430971
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Ensure in init_failure() that even after we generate
a UUID, the init still fails since the backing_dev
function pointers are still NULL.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3287da8626152649416b4aaf4285eb9f84f79200
Reviewed-on: https://review.gerrithub.io/433084
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
DPDK treats align=0 as effectively align=8. But the
test_env spdk_malloc uses posix_memalign and passes
the align as-is. posix_memalign requires a non-zero
align parameter however. So change the test_env
implementation to match DPDK.
This fixes libreduce unit tests, since it does some
allocations with default alignment.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If2fbad0bcc3bc92b50b50f21d7e893e0ba05e325
Reviewed-on: https://review.gerrithub.io/433083
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Also make ipsec configuration and install optional
in pkgdep.sh.
Change-Id: I0c973398cebce0f50c704b21f6397e8d996ba9f9
Signed-off-by: Ed rodriguez <edwinr@netapp.com>
Signed-off-by: John Meneghini <johnm@netapp.com>
Reviewed-on: https://review.gerrithub.io/432424
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Write pm filepath first to offset 4K. Then write
the super block to offset 0. This ensures the backing
device isn't really valid until both are written
(avoiding the case where the super block got written
but not the path.)
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I55508aa67b4179e658827c982cd955d009a3f321
Reviewed-on: https://review.gerrithub.io/432505
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <spdk-ci.pdl@broadcom.com>
While here, add basic implementations for these function ptrs
in the unit tests.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I54e18a3b331777602fed29382b95b449005efcce
Reviewed-on: https://review.gerrithub.io/432503
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This avoids "already claimed" error messages in the bdev
json_config tests, by making sure the passthru bdevs
get deleted before we create it again via the JSON
config file.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2447c05692030b233ea791ec8a962eac4003c7d9
Reviewed-on: https://review.gerrithub.io/432600
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Rewrite the shutdown test to use bdevperf. This has a few advantages:
1) We avoid any kernel bugs in the NVMe-oF initiator which is not
designed to be connected/disconnect quickly.
2) It is much faster
3) It is much less variable in behavior.
Change-Id: I410ade64677ec14a7b0851a674650a145555f4ed
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/432356
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Apparently this patch revealed an issue somewhere in SGL
handling in NVMf initiator which is causing our CI to fail.
Let's revert it while we work on a proper fix.
This reverts commit 6f5840d225.
This is not a full revert, some app.c changes to the usage text
were kept unchanged.
Change-Id: Iddea5c2b9df50bd12ef8f6226165883f6622ab33
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/432576
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: Ben Walker <benjamin.walker@intel.com>
There are now other unit tests which exercise the success path.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I601395aff7d3c5e88bdcf2986a25e71b0e2f5d39
Reviewed-on: https://review.gerrithub.io/432500
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Idcfb328a26fc85f3c144da9c27086a71c00d0d46
Reviewed-on: https://review.gerrithub.io/427830
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
This option is deprecated. Also, rename the rpc and configuration
options for setting the opts to reflect that they now only set the max
number of subsystems
Change-Id: Iaabcbf33dd0a0dc489d81233fda74e9e7f3e0d2e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/430161
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now that we utilize DPDK dynamic memory allocation, we
no longer need to set the default pre-reserved memory size.
It'll now be 0, which implies all memory will be allocated
at runtime.
The option to pre-reserve all hugepages on the system is
now only available on BSD, so also clarify that bit in the
app usage text.
Change-Id: I5a8a1d9bf14ad6d938532d7e6254a45e4a81bb92
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/432204
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add the following to struct spdk_reduce_pm_file:
* path of the pm file
* pointer to the mmapped pm region
* whether the mmaped address is pmem or not
Now use pmem_persist or pmem_msync to persist volume
parameters. Note that we do *not* persist the pm filename
to the pm file - the pm filename will be written to the
backing disk in a later patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1d873ae086dc20600798a49b98e1bf490ac750f3
Reviewed-on: https://review.gerrithub.io/430648
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
--with-reduce required to build reduce. This depends on
libpmem being installed.
We still need to work out details in pkgdep.sh and
vm_setup.sh. Some distributions like Ubuntu still
require configuring extra package repositories to
get libpmem packages.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4e056ce1da9a1fecb4458f8f5e7ff5d61c422533
Reviewed-on: https://review.gerrithub.io/430646
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A compressed volume will require both a persistent
memory region/file for per-chunk metadata and a
backing device to store the compressed blocks.
Add functions here to calculate the sizes of these
based on the desired size of the compressed volume,
its chunk size and the size of each backing block.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9203479e2a268c3ab0e2b0e06e348285e9d1cd13
Reviewed-on: https://review.gerrithub.io/430387
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
reduce will be a block compression algorithm designed
specifically for SPDK. It is called "reduce" because
it reduces the data size on disk.
This patch just adds the shell of a library, include
files and unit tests. This will be fleshed out in
the rest of the patches in this series.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I88e238af64142a7c0e50ab7b447280026b55581f
Reviewed-on: https://review.gerrithub.io/430386
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is much, much faster to set up and tear down than
the kernel initiator plus fio.
Change-Id: I9532b734123556d6e2055e4f3acf2ad4887784c3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/432085
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
As a step toward non-blocking JSON RPC client change the the way we
retrive the response.
Now we retrive full response by calling
spdk_jsonrpc_client_recv_response(). If response is ready it will be
parsed to spdk_jsonrpc_client_response object then user can issue
spdk_jsonrpc_client_get_response() to get the response object. When
processing response object is done the user calls
spdk_jsonrpc_client_free_response() to free it.
This logic will simplify both non-blocking mode and multiple response
handling.
Change-Id: I737d8a34283f4a68795d6bc6ba0c8646b7ae3319
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/429262
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Check if dpdk can allocate memory dynamically
Change-Id: I36751140f96bac36ef5e16f47e1d163019618313
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/412768
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
And change names of parms to be consistent with others used in
RPC testing.
Change-Id: I8331c6a22866d89a2a4ffb5fc8d41d74b4b7b07d
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/428724
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Since a PDU can be sentout in many times, so this
function is called multiple times, so move the
caculation function in spdk_iscsi_conn_write_pdu
Change-Id: Ib4da4a74c17709d98e4b01c2e76428021afea947
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/429931
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This function was always reporting true. Instead of grepping for the nic
name in the output, look for whether there is an rxe device assigned to
that nic.
Change-Id: Ic69868cfb0802a46c36b2fb83d01bca11ed9c181
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/431690
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add missing wait in test/nvme/shutdown/shutdown.sh
Not waiting after connecting nvme device resulted in undefined behavior.
This patch uses new helper function - nvme_connect
Change-Id: Idb29c7f6b40ae4b3fa0eb68f7b8d5f86d9a4149f
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/428336
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In cases we probe without a specific trid, the underlying
rte_bus_probe() in spdk_pci_enumerate() might fail to
initialize some devices, but still return with code 0,
That's technically correct, as we asked just to probe
devices on the bus and that's what it did. Some devices might
have been initialized, others not. In secondary process we
blindly assumed all devices were probed successfully, which
might have eventually led to assert failures, as current
process was not on the ctrlr->active_procs list.
To fix it, just add an additional check before attaching
the controller in secondary process.
Change-Id: If015b1e562052a9189ed1a48091b209bd2dd5f2a
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/431727
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We only detached the PCI device on the controller destruction,
which happens just once - in the primary process, but secondary
process needs the PCI detach as well.
Requesting to hotremove the NVMe PCIe controller in secondary
process is broken, because DPDK will still keep the device
reference and won't allow SPDK to hotplug it again.
Fix this by detaching the local PCI device whenever removing
a secondary process from spdk_nvme_ctrlr. This does require
an additional transport check in the generic NVMe layer, but
I found it an overkill to create a multi-process transport
abstraction just for this case.
Change-Id: I812dc1c878ade5b149556806228a2afcb49f0b17
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/431487
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This includes the NVMe-oF json_config and spdkcli tests
Change-Id: I5e4dad2c1bb68c4b7f36d50e937c56ef642f65b7
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/430166
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Current behaviour will match anything that contain address. Change this
to match whole address only.
Change-Id: I6343fb91ed624cba41adbc33d711fb48c2f167a1
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/431530
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Especially for rxe. We're not waiting for the queue pairs to get
cleaned up after disconnect, so this test fails due to running
out of qpairs sometimes.
Change-Id: Ib99133776d02743782ef1631e3880e4e6997c1b5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/431372
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
702 case are listed in NIGHTLY test and run PASS,
but it not listed in lvol.sh' usage().
It's easy to be confusing.Where is 702 case?
Change-Id: Iad376112510b277e8747798dde5ef0f12b42c2ec
Signed-off-by: WangHaiLiang <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/430905
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Refactor the printout of autorun-spdk.conf and fix the path for
pkgdep.sh (the previous path was based on an old assumption)
Change-Id: Id95e0f80f835dd1b055a94a6bfdbffcce029b8af
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/430843
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Previously there was no consideration for IO that were outstanding
to the crypto device when handling a reset. This patch makes sure
that those IO are completed with FAIL status prior to completing
the reset that we pass down the stack.
It does so by sending down the reset first and in the completion
using spdk_for_each_channel and the poller to quiesce each channel
allowing the crypto side to complete all IOs before we finally
complete the reset IO after the last channel is quiesced.
Resets are tracked on a per bdev basis.
Addresses github issue #449.
Change-Id: Iadb07bada1fcaad33d9f224a60d983a7eb835236
Signed-off-by: paul luse <paul.e.luse@intel.com>
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/428552
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Also, remove bdev_svc memory limit to prevent it from hanging while
handling discover_bdevs calls.
Change-Id: I2868839f40931b964d49a90a86dfb391e2247e30
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/429535
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This helps us avoid situations where other bdev modules will break the
rte_pci_bus mappings for qat devices before we have an opportunity to
initialize the qat pmd.
Also, update the blobstore match file to handle the possibility of using
a crypto driver and improve the json_config and spdkcli scripts to
handle allocating qat_crypto drivers.
Change-Id: I7359c67d1992df1d5bb85585eca6d5c342787649
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/430393
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
By running random, 64KB, 70% write, and 30% read workload and periodical
TCP disconnection from the initiator, segmentation fault have occurred.
By investigation, when the last write task completed and dequeued
the primary write task in spdk_iscsi_task_cpl(), the primary write task
was already dequeued in spdk_clear_all_transfer_task().
This patch dequeues all primary write tasks after all outstanding
tasks complete.
After starting to exit the connection, the connection will not receive
any command. Hence waiting for completion of all pending tasks first will
avoid double dequeue safely.
Change-Id: I8e2b6b756be3a6e096675acc81cdb93fb6a7e350
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/430397
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Forcing bdev_svc to use a single hugetlbfs file causes the crypto bdev
to fail to properly allocate qpairs for qat devices. The qpairs come
back from the dpdk function queue_dma_zone_reserve misaligned.
Change-Id: Ib0c95856031ca89f6528ea6d39ef68e03e2f9009
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/430372
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The memory restrictions were causing issues with allocating crypto bdev
qpairs when using qat.
Change-Id: I1e8a9799006293cb54f8959cfd24e38c4dee6d0f
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/430104
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This script should be called when testing the crypto module. It will
configure any qat cards with class code 37c8 for use with the spdk
crypto bdev module.
Change-Id: I233069fbe9ba3c7a6463f52443234f9fe2c9a1f7
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/428549
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
nvmf_create_transport can be run both before and after the subsystems
have been initialized. Therefore, we don't need the --wait-for-rpc
argument in most cases. This eliminates the need for calling
start_subsystem_init.
Change-Id: I35560fb968159b4796b1022b1de9cca4dfc5feeb
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/429983
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We need additional mocks for structures that were added
in the most recent DPDK release to make our unit tests
build properly.
Change-Id: If6e471528d4cb1dce24fb5d910e9e545fcdaa0f6
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/429987
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change-Id: I94a59e240744acceca138d56bd141e9aec2e6270
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/429875
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When trying to run the blockdev.sh test against a crypto bdev using qat,
I consistently got allocation failures on the malloc disks. I believe
that this is because the qat pmds require some amount of dma safe
memory. While the requirement is not huge, it is enough to fragment the
hugepages and make it impossible for us to allocate 7 contiguous 64MiB
buffers. The tests passed when this number was reduced to 32 MiB.
Change-Id: I66716a918123bc69e8b5d19412ac1f9c0b3dd462
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/429534
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In JSON RPC the ID is optional. Method is mandatory but user might want
to produce the name later or by using
spdk_json_write_named_string_fmt(). This patch also changes the argument
order.
Change-Id: Ifbd35b8c93e684d15731c4ba1d18bf68d1e8a068
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/429254
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If JSON structure is not known it is hard to use it with current API. To
address this gap lets add API that will give more flexibility the user.
This patch also adds proper unit tests.
Change-Id: I82eb8c8d4a562ee4c9eb5b72c69fe36004dc576e
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/424009
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In the case that the subsystem in the related poll group has
NULL IO channel assigned due to some problem like out of resource,
for example, the NVMe SSD hardware itself has limited number
of IO qpairs. The subsystems in the particular poll group
could have zero valid channels. In this case, the creation of
assoicated poll group will fail and when adding the new qpair
to the specified poll group, needs to have a check and pick the
available poll group.
Change-Id: Iedee2a6375e48eb7bf899cfb0542c565c7ebd231
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/423646
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is inspired by pkg-config dicussion for SPDK packaging. For now it
used during nvme-cli building to remove greps on current configuration
just to discover proper LDFLAGS.
Change-Id: I18b3e7690dc27b8c418cb897e57e224850fa7435
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/428335
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Fix variable name added in patch:
https://review.gerrithub.io/#/c/spdk/spdk/+/429049/
Change-Id: I0349dfd16f784a0cc92ff64beae3389c1de8b55c
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/429485
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will resolve out-of-space errors that have cropped
up as SPDK continues to grow. There's no need to copy
*.o files to the mounted filesystem - we 'make clean'
right after the rsync anyways.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6844183c527953fd4b3329f04171f05e503b04dc
Reviewed-on: https://review.gerrithub.io/429517
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change-Id: I189ad8889c74937bf43bcf2c3029416ddb94976d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/425705
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I875cc9d6a6bd1e9e9ac25ca9103a2070226ac236
Reviewed-on: https://review.gerrithub.io/428877
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This function doesn't return error code
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I67a8fa7393990470e509baa8934e78bc6f6a6c9e
Reviewed-on: https://review.gerrithub.io/429441
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The RAID module is no longer marked experimental and
is now built by default. Using '--with-raid' was giving
us an additional deprecation message:
> --with-raid option ignored and is now deprecated.
> RAID module is always enabled.
Change-Id: If9cc65a4900fc93d07fa88a3ebe3498001916285
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/429179
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When running these tests, we want to set the transport opts, not
necessarily the target opts. This will also open us up to doing broader
tests in the future against different transports.
Change-Id: I73112f82c371592456c65355f53f7970878a59c3
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/429049
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I90f68e9dbe00854f569f6574b9c89508f89caa43
Reviewed-on: https://review.gerrithub.io/428876
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
It's a C libary for client to call rpc method.
Change-Id: I5378747bd9dab83a41801225ba794b3910d1f5a5
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/424061
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The problem with registering the entire hotplugged memory
region is that it won't necessarily be unregistered in one
go. Registering each hugepage separately solves that
problem.
This puts a limitation on the number of pages that can
be allocated when using RDMA. We'll hopefully lift this
limitation sometime in future - probably levereging
ibv_rereg_mr, but for now we'll have to resort to either:
a) using 1GB hugepages
b) preallocating memory (with [-s|--mem-size <size>] app
param) as it will be registered as just one region no
matter what size it is. This memory won't be returned
to the system until the SPDK app exits.
Change-Id: I6de997fb4901b772730ba6fe995dcc0640b85749
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/428716
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
All mem_maps will still receive separate unregister
notification for each registered region, but the
public memory unregister API is more flexible now.
This follows the VFIO_TYPE1v2_IOMMU interface, which
allows the same.
Change-Id: Ifc008afdc6bff39d9b3b4c892c379ade10c3098e
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/428715
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added sanity checks to prevent unregistering a memory
range that wasn't registered as a one, complete region.
Change-Id: I819b57560b2e48b0802113ffff9f72949d7a148a
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/425556
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Removed the reference count from the registrations map.
Although technically supported, registering a single memory
region more than once had a lot of unhandled cases and could
easily lead to a segfault.
RDMA maps require all memory to be unregistered in the same
chunks the memory was registered, which is often impossible
to achieve if a region was registered more than once:
1. register region 0x0 - 0x3 -> it gets mapped to
a single ibv_mr
2. register region 0x1 - 0x2 -> nothing happens, this region
is already registered
3. unregister region 0x0 - 0x3 -> 0x0-0x1 gets unregistered as
one region. 0x2-0x3 gets
unregistered as another
(leading to segfault in the
the current RDMA implementation)
The problem is that the last two regions share the same ibv_mr,
which SPDK tries to free twice. The second free causes a segfault.
vtophys map handles this case by registering each 2MB chunk
separately, but this solution cannot be applied for RDMA, as
NICs put a limitation (~2048) on the number of regions registered.
Another option is to keep a refcount of each ibv_mr allocated,
and free it only when the entire region was unregistered from the
SPDK mem map. This is however very tricky and RDMAmojo mentions
that freeing a memory buffer before unregistering its ibv_mr
may lead to a segfault.
Change-Id: I545c56e24ffa55bda211dea22aeb8a55d9631fe5
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/426085
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Prevents us from unregistering two or more separately
registered regions with a single notification.
This fixes an ibv_mr leak in RDMA. When multiple registrations
were unregistered with a single notification, only the first
ibv_mr one would be freed and the remaining memory would
possibly still remain DMA-able.
As of now, unregistering multiple complete regions with
a single unregister call is not possible. It will be
implemented later, after the rest of the code is cleaned up.
Change-Id: I7d61867fa61fd7a4a8a644ff45cab17125d63e1b
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/425555
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Moved them from test/env/vtophys to test/env/memory
because that's where they should land in the first
place. Our memory ut already test allocating a mem_map,
so just extend them with an extra test case now. Since we're
a unit test rather than a fully-fledged SPDK app, we can
simplify the code a lot now - we no longer have any memory
(hugepages) registered at the beginning of our test case,
hence we no longer need to alloc multiple dummy mem maps to
iterate through all registrations - we can simply hardcode
and predict which registrations are there.
Change-Id: I82cd00ea2ad2370bdc63846874885f8c55e11d53
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/428714
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Purpose: We need to get the port info in other applications
(e.g., NVMe-oF TCP/IP transport)
Change-Id: I3a4636e764e44425436bb064cb0062c6f3e44035
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/428313
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Large read I/O will be typical in some use cases such as
web stream services. On the other hand, large write I/O
may not be typical but will be sufficiently probable.
Currently when large I/O is submitted to the RAID bdev,
the I/O will be divided by the strip size of it and then
divided I/Os are submitted sequentially.
This patch tries to improve the performance of the RAID bdev
in large I/Os. Besides, when the RAID bdev supports higher
levels of RAID (such as RAID5), it should issue multiple
I/Os to multiple base bdevs by batch fasion in the parity
update. Having experience in batched I/O will be helpful
in the future case too.
In this patch, submit split I/Os by batch until all child IOVs
are consumed or all data are submitted. If all child IOVs are
consumed before all data are submitted, wait until all batched
split I/Os complete and then submit again.
In this patch, test code is added too.
Change-Id: If6cd81cc0c306e3875a93c39dbe4288723b78937
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/424770
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch added the support of RPC method to enable,
adjust, disable the bandwidth rate limit on the bdev.
And it can work together with the existing IOPS rate limit.
The RPC method has been consolidated to support both IOPS
and bandwidth rate limits as below:
usage:
rpc.py set_bdev_qos_limit [-h]
[--rw_ios_per_sec RW_IOS_PER_SEC]
[--rw_mbytes_per_sec RW_MBYTES_PER_SEC]
name
positional arguments:
name Blockdev name to set QoS. Example: Malloc0
optional arguments:
-h, --help show this help message and exit
--rw_ios_per_sec RW_IOS_PER_SEC
R/W IOs per second limit (>=10000, example: 20000).
0 means unlimited.
--rw_mbytes_per_sec RW_MBYTES_PER_SEC
R/W megabytes per second limit (>=10, example: 100).
0 means unlimited.
Change-Id: I9c03cd635280add01801a81c6a6c02f0cf85bee1
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/416511
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Coverage report indicated these were not currently
covered.
Change-Id: Ic67f1d6321c39c59ede8a379051e238d3b0fecb6
Signed-off-by: Mike Altman <maltman@scalecomputing.com>
Reviewed-on: https://review.gerrithub.io/428447
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Normally, there will be only one separator in transport id,
for example, either ':' or '='. But the users may input
this: trtype=PCIe traddr=0000:81:00.0.
Thus, there will be two diffrent separator '=' and ':',
and our function doest not handle this case correctly.
And this patch can fix this issue, and also update the
test case.
Change-Id: Ic3f10dc1e37c66647fede37c5cf9523fc2652677
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/428307
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_bit_array_find_first_set() returns UINT32_MAX if no
set bits are found. But spdk_bit_array_find_first_clear()
would return the size of the bit array instead in this case.
(Note: the comments say size of the bit array + 1 which was
incorrect)
So this patch makes spdk_bit_array_find_first_clear()
consistent with spdk_bit_array_find_first_set() and returns
UINT32_MAX if no cleared bit is found.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I44c1e674149f8c2e87122800d5db45a2851f0bef
Reviewed-on: https://review.gerrithub.io/428225
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Remove the unnecessary line
Change-Id: I0fd23cca90bb9c785c1a2c0c4abdc7b29d0acc60
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/428314
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Splitting IO in the bdev layer is a little complex and increasing
the coverage in unit tests will be good.
Change-Id: I9d42cedc795b2804a472bdc310e936135c424fd3
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/427948
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Expected values are managed by linked list now. Hence we can set
up all expected values before starting tested split I/Os.
This change will make the logic clearer.
Change-Id: I9226619468220132aebd55a5da36490a145c128a
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/427947
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If during mem_map creation we managed to register only a part
of the total registered memory and then failed in the middle,
we will now undo our registrations and gracefully return
an error code leading to a spdk_mem_map_alloc() failure().
Change-Id: Id549f35109bd381318adc676392d9ee26d035359
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/423538
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Test to create and delete full configuration for iscsi node.
Change-Id: I1c09741bf5afcc7cf9ce58c08973439088ea3ba4
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/425179
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add create/delete methods from iscsi subsystem to spdkcli.
Change-Id: I950b3f29720fd5f09e4144d139e6d0e5885c69c8
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/424607
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Boot os from a vhost controller using lvol bdev on a device with
512B block size. It performs fio integrity test.
Change-Id: Ic30a5dc33d9dd072559d9101f31e22e9e96862a7
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/421758
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Also do a few connect/disconnect sequences before killing it.
Change-Id: Iaa36f259f43aa0896878432777458a3e0bed7ffd
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/425999
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I994b5d46faffd34430cb39e66225929c4cba90ba
Reviewed-on: https://review.gerrithub.io/414935
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also fix options that doesn't start with CONFIG_ prefix.
Change-Id: I32a24373328bab8f513d56c0c09b5a86589f690c
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/427767
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Connections to a subsystem may only originate on listeners
that have been explicitly allowed for the given subsystem.
Change-Id: Ib575a5803cc7af75c15d1a2c76b9866594e7a1db
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/425024
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
A subsystem cannot accept a connection on a listener
until that listen address has been added to the subsystem.
Change-Id: I5ae290d8e763ad077ce3dbda2462362ff91ba160
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/425300
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Each file that need to check SPDK_CONFIG_* options need to include
spdk/config.h explicitly.
Change-Id: If9f2a91ac4c2b1a300dcf88ec3e2a12714ad344a
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/427221
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
We need to include it in devel package.
Change-Id: I823200632e8bcb9fdb86c8cb5fbf3a651a710b78
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/426839
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
In newer versions of the kernel, there is a race condition that causes
the kernel block layer to mess up if an nvme-oF subsystem is
disconnected before it is fully removed. This can cause the shutdown
test to hang during a sync call aftr nvmf tgt shutdown. see:
d1ecb02290.1537982067/fedora-06/build.log
for details.
This problem has been observed and fixed in the RPC tests also.
https://review.gerrithub.io/c/spdk/spdk/+/426772
Change-Id: I9ec8517e067448be323e69979adf5d3915195c80
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/427152
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change system manager timeout for stopping services.
Lagging services cause timeouts during shutting down VM.
Change-Id: I7428724cf8795ffe3c215bacdb56cb3f58fbdff0
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/427715
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is to introduce the specific QoS related structure
and the enumeration for types of QoS rate limits. Later new
types of QoS rate limits can be supported easily.
Change-Id: Idb8d2e7627fd145bf2b0ddb296c968b6b068f48c
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/424459
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
As a side effect, if SPDK_LOG_DISABLED is used in spdk_log() as log
level then no message will be printed.
Change-Id: I2d57b60a5a310a9ef2a1187a81088d0acf828742
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/425105
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Update the branch to point at our code rebased on the most recent
mainline release of nvme-cli. This branch includes fixes for
compatibility with gcc 8.
Change-Id: Ie1bdb046d1e24e832bda585dd9841619451ec5f5
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/426985
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This allows a userto run the script without specifying a configuration
file. Removing this dependency opens us up to things like calling
vm_setup directly from a vagrantfile without having to first copy the
spdk source over.
Change-Id: I72074a445f8befc714c03cab57a2da539350c092
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/426944
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Current test code works only for sequential split I/Os. The next
patch will support submitting batchedsplit I/Os.
Prepare test code as a separate patch to make review easier.
Change-Id: I05b732c9a656ecab74a2594bf50ddf42eb41584e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/425877
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When a bdev IO is split, if iovec size in a strip is more than 32,
the IO will fail.
Remove the limitation by spliting the split IO further.
Change-Id: I962ad86dfe63ea1fcd86ffa52ead7452fb80e53d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/425876
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reducing as a preparation for running vhost iniator tests
on Vagrant VMs as they do not have sufficient space for
this kind of test.
Change-Id: I20a8c3c4b1b547599be5c10e1935213f512e4c21
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/427020
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Enable users to automatically create VM image dependency
needed to run vhost tests.
Current state of Vagrantfile_vhost_vm is only valid
for Ubuntu 16.04 and 18.04.
Change-Id: I9cdf46c1db7fcd55cfda0dd7db7ff5570610c5ee
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/422948
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Use nvmf_subsystem_create method instead.
Change-Id: I8d7306b064d98ab0df02ea9d95e56a44c665cc2c
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/427018
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We can significantly speed up the vm_setup.sh process by installing
dependencies in parallel.
Change-Id: I424efdf6da26a7f1394fbdca1cb6129e7329fc16
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/426981
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
By keeping the main shell in the same directory the whole time, we will
be able to parallelize a lot of the work of cloning and making
dependencies. This should significantly reduce make time to run this
script on a target machine.
Change-Id: I5efbd9c8f50b95411cbe7be69905b08df557344e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/426980
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This significantly decreases the amount of time it takes to run this
script.
Change-Id: I5424cd7c9f3caf49a529916d528c0cc3a7af8838
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/426947
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Most vbdevs have complete test suites that include rpc calls
to set them up and teare them down. With crypto there's not
a lot to do w/test other than make sure it's configured and
run IO so right now that amounts to tools that use a config
(ini) file. Adding create/delete calls here to get basic rpc
coverage in CI.
The fixes/udpates in the vbdev module and the .py files were
fixes found in enabling testing of the rpc calls.
Change-Id: I5d7d25e1c96dcf76e0055f23d27781b858e290b0
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/425875
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In newer versions of the kernel (tested on 4.17+), it doesn't always win
a race with itself between subsystem creation and deletion. This ensures
that we have completely connected before disconnecting in this test, and
makes running NVMe-oF tests on fedora 28 more teneble.
Change-Id: I6e09a4f8a23764ea53edfe7b23504a4772bf9297
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/426772
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change made in https://review.gerrithub.io/#/c/spdk/spdk/+/425187/
mistakenly change name of rpc_nvmf variable.
Change-Id: Ie973581777ec426d58d8b3cae12b747b4c3bd8c8
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/426520
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This function will now check for whether or not a memory region is
contiguous accross 2MB map entries and return the total length of that
contiguous buffer up to the size specified by the user.
Also includes unittests
This series of changes is aimed at enabling spdk_mem_map_translate to
report back to the user the length of the valid mem_map up to the
function that requested the translation.
This will be useful when retrieving memory regions associated with I/O
buffers in NVMe-oF. For large I/O it will be possible that the buffer is
split over multiple MRs and the I/O will have to be split into multiple
SGLs.
Change-Id: I2ce582427d451be5a317808d0825c770e12e9a69
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/425329
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This series of changes is aimed at enabling spdk_mem_map_translate to
report back to the user the length of the valid mem_map up to the
function that requested the translation.
This will be useful when retrieving memory regions associated with I/O
buffers in NVMe-oF. For large I/O it will be possible that the buffer is
split over multiple MRs and the I/O will have to be split into multiple
SGLs.
Change-Id: I90da6d4d31c669a3bf046f7721923dd743c5ef21
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/425328
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
For single base bdev case, IO is changed not to be split. However
UT code was not changed together.
Change-Id: I81e66b256892b7bee7a42c72bb0bce6d3320b617
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/425534
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For those with fat fingers or really bad vision... previously bdevperf
would take a bogus size and try to make it work, if you used the verify
feature this could (or would in my case) result in a data miscompare.
Change-Id: Id5d4c4130c3d3c0606d6a243d2ca278e539684e9
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/425883
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
1. Add the raid bdevs which based two malloc bdevs into subsystem
to run NVMf target fio case.
2. Create the lvol store with raid bdev which based two malloc bdevs
when the number of subsystems is equal to 1.
Change-Id: Ia7dda4f1b99e259d1fd28b8856cc8c6e791e7720
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/422493
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The custom nvme-cli code is used in both the NVMe and NVMe-oF tests.
Change-Id: I51aab2050e1921aac899970e7abd3f1cd64836ba
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/425642
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
running_config test step in test/iscsi_tgt/fio/fio.sh
breaks nightly test builds.
This is caused by "ReactorMask" parameter in generated
config file which was deprecated and seems to be no longer
supported.
Change-Id: Ibea72b7b883adaae939db1e5ea15724817d6dfd2
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/426199
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Use nvmf_subsystem_create instead.
Change-Id: Idcfa6526ef47e2839f69acd5d7dc08e65e5150b5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/425187
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add dependency $(ENV_LIBS) for test/env/*
as part of new variable $(ADDITIONAL_LIBS) which is direct dependency
of $(APP) in mk/spdk.unittest.mk
This solves the problem of
make not triggering LINKing for test/env/*
after changes made to lib/env_dpdk/*.c
Issue was that Makefiles in test/env/*/ classified tests as unittests
by including mk/spdk.unittest.mk
But unittests are not using env_dpdk which means that
unittests don't relink on env_dpdk update
Change-Id: I91b6690dc92d68bc69bbf11ac5336d3a7f56e4e4
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/425665
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I77cf0b8d64c1bfa050d61440472ff65821673b39
Reviewed-on: https://review.gerrithub.io/423999
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I824735548d4aaadefd09c943889f885c35d326c0
Reviewed-on: https://review.gerrithub.io/425545
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
rpmbuild pointed out that this is wrong to have executable files without
shebang. Taking the opportunity and fix this for other files too.
Change-Id: Ib21f436672150edc0aff511bff2eb6839870cf79
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/425382
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Avoid using the deprecated construct_nvmf_subsystem
when dumping configuration.
Change-Id: I908d87bdd77a8b2a8e54baeb7b73e8b52c4912ee
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/425186
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add a new script to enable converting
old INI config files to the new JSON-RPC
config file format.
This prepares for deprecating the INI
config file file format in the future.
Change-Id: I0f2bfa9a585ce3537772b662d8e4028ab08a554d
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/420457
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Initial support for softare AESNI_MB DPDK driver only.
Have tested (both aesni and QAT seprately and concurrrently) on underlying NVMe devices
with bdevio and a bdevperf script that runs IOs from 512B to 128K each with Q depths from
1 to 512 in powers of 2 for 30 seconds each run.
QAT can be included in the code (but not makefile) and marked as experimental
until we are ready to test in CI. It works well on 2 systems but is a big PITA to get
the hardware setup and configured for use with DPDK (IMHO).
Change-Id: If518c3df8e74e00efa18afdf194824c5e69778fc
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/403107
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
- Add independent functions to create transport with specific opts
and add to target while maintaining backward compatibility with
current apps and rpc configuration that still use the add listener
method to create a transport.
- Add new rpc function to create transport and add to target.
+ Update json reporting to include new rpc function.
+ Update python scripts to support new rpc function.
+ New nvmf test script (cr_trprt.sh) to test new rpc function.
Change-Id: I12d0a42e34c9edff757755f18a78b722d5e1523e
Signed-off-by: John Barnard <john.barnard@broadcom.com>
Reviewed-on: https://review.gerrithub.io/423590
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
sshfs is used to mount the shared filesystem used for communication
between the pool and agents.
Change-Id: I7c2a216ac57e394915f99bccf39d62d2ee17e5fb
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/425513
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The function now takes a pointer as it's last argument, and copies the
size of the memory region for which the translation is validinto that
pointer.
For now, that will always be 2MB. However that behavior can change in
the future.
This series of changes is aimed at enabling spdk_mem_map_translate to
report back to the user the length of the valid mem_map up to the
function that requested the translation.
This will be useful when retrieving memory regions associated with I/O
buffers in NVMe-oF. For large I/O it will be possible that the buffer is
split over multiple MRs and the I/O will have to be split into multiple
SGLs.
Change-Id: I8686c166ec956507f5ae55cf602341281482cb89
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/424888
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
1. Use the Raid-0 bdev which based two malloc bdevs to instead of
one malloc blockbdev.
2. Create the lvol store with Raid-0 bdev which based two malloc bdevs
when the number of Malloc bdevs is equal to 1.
Change-Id: I8b584ad09011386b405e4756c04273834b24f029
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/423043
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Instead of adding the linker flags just before application compilation
on linux, move that linking to earlier in the process. This will also be
useful for the shared library build.
This series is aimed at fixing github issue 434
Change-Id: I84bcc6bd922ddb6e48adb2dfe0b154700773cf27
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/425435
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows us to better distinguish between external and internal libs.
This series is aimed at fixing github issue 434
Change-Id: I2ed141f909e7c4a800df02061007b0d23da25380
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/425434
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch just adds the call, but doesn't change behaviour of blobstore.
io unit size remains same as page size.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Idcd1b7d5126fc7cacf12c996188bd41e2c9a744d
Reviewed-on: https://review.gerrithub.io/425355
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This it to prepare for RPM package. Also lower number of dependencies
needed by SPDK tools.
Update changelog to deprecate Python 2 and explicit interpeter invoking
in scripts.
Change-Id: I2497cca721cbcbadc1c99c675f8b8b7f682d5efa
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/425233
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Python 3 is changing order of objects in JSON object when doing load ->
dump. Using OrderedDict solves this issue.
Change-Id: I0aa6364de31e871aed36edd918d25c261c66b506
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/425494
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Enable tracepoints and move shm file to
the output directory in case of crash.
Cleanup all shm files after successful run.
Change-Id: Ie46c86ddda71015038624f9b2b5fd4a3e1d7f61f
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/425078
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Need to check if process still exists before killing it.
Otherwise if process crashed and no longer exists kill will
return with "no such process" error and prevent other steps
in trap from executing.
Change-Id: I4402d06a4fafa09dc13fba4ef9ebeb2b2fc686bb
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/425353
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The bdevio tests will now work on RAID volumes, so enable
RAID testing there too.
It is probably safe now to just build RAID by default, and
not require --with-raid - but let's do some more testing
with vhost and NVMe-oF against it first before we do so.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I15697f035cb688574a7ecb8be24d0c84fc622d83
Reviewed-on: https://review.gerrithub.io/423408
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Iea0c8e8c2405d008e77f8bea1a3c30f2f873fa3d
Signed-off-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-on: https://review.gerrithub.io/420134
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
User can pipe or redirect data as needed. As features like
bdev crypto are added, storing config data in files needs to
be carefully scrutinized - don't make it easy by providing
ways to write data to files that may not be sufficiently
protected.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I24dd32f81b965e275e1bac875f6d008d1b68007a
Reviewed-on: https://review.gerrithub.io/425165
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change the behavior of construct_raid_bdev RPC to be consistent with
other bdev modules.
Create a config of raid bdev first. Then create a raid bdev based
on the config.
If both succeed, the config and the raid bdev are not removed even if
any failure occur later in construct_raid_bdev RPC. Otherwise, both
are removed and return failure.
During iteration of adding base bdevs in construct_raid_bdev RPC,
- skip any nonexistent bdev and move to the next base bdev.
- if adding any base bdev fails, move to the next bdev.
- if adding base bdevs don't fail but any base bdev doesn't exist,
the raid bdev is in the configuring state and return success.
- if adding base bdev fails, the raid bdev is in the configuring state
and return failure.
- if all adding base bdevs succeed, configure the raid bdev. If configuring
the raid bdev fails, move the raid bdev to the offline state and return
failure. If configuring the raid bdev succeed, return success.
check_and_remove_raid_bdev() becomes unused in raid_bdev_rpc.c but
is still necessary in UT. Hence move this function to UT.
In UT, finding a raid bdev config by name becomes necessary. Hence
factor out the iteration to a function and use the function in UT.
Change-Id: Ifa36967bdc987d97030e3a4e36684cb37b329d4e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/423622
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When construct_raid_bdev RPC is callled, even if all adding base bdevs
to it fail, a raid bdev with no base bdev should exist and be in
the configuring state.
Extract raid_bdev_create() from raid_bdev_add_base_bdev() and put it
before starting iteration of raid_bdev_add_base_bdev().
This change cam be applied to .INI config file too.
Change-Id: Ia71aca0bbdb33049fe5bd9b8fd8163c99c032401
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/424148
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Cleverly, UT for raid bdev sets number of base bdevs by using
the random number generator.
When the random number generator outputs 1, test code especially
for single base bdev case failed.
When removing raid_bdev_send_passthru from library, the corresponding
test code was not removed.
This patch removes the test code.
Change-Id: I23be88358fe364bc757979a26398b80339e19910
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/424159
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This was not being tested on every patch previously.
Change-Id: I0a1756f3709da6608f66a2160962ed9b0fb38c7b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/424890
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently in the function nvme_ctrlr_start() the initialization
process is executed as a whole, in the case there are many controllers
in one system, which means other controllers must call the function
one by one. While here, we add several states here, which can
help refactoring the initialization process.
Change-Id: I209cf964bbf6e151823a7ecdc6a3f6e6e69df297
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/424157
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There is a race condition with the following sequence:
spdk_bdev_open()
spdk_bdev_unregister() <-- starts deferred message
spdk_bdev_close()
deferred message runs, crashes
Change-Id: I81fbced0849949cfb2dae5a7cc6f60c9685a8885
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/424739
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Latest scan-build finds a legitimate issue here - although
it's not clear why it was only found when testing against
a seemingly unrelated patch...
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic981f6f403c638b0b2d454c0be9f7fbe145171d9
Reviewed-on: https://review.gerrithub.io/424887
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_bdev_close() must be called on the same thread as
spdk_bdev_open(). Further, the remove callback on the
descriptor will also be run on the same thread as
spdk_bdev_open().
Change-Id: I949d6dd67de1e63d39f06944d473e4aa7134111b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/424738
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The previous patch fixed the underlying issue.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic5ccaf82aba4d2ed8644b34bd4d0294784fd1de2
Reviewed-on: https://review.gerrithub.io/424734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
in script test/nvmf/host/perf.sh
github issue #396 has been fixed by removing nested lvol in patch
https://review.gerrithub.io/421136, but the testing of nested lvol
was removed, we can construct nvmf subsystem only after nested lovl
bdev was constructed, it can also fix this issue.
Change-Id: I1783aa76c5ce9f076e73827d46de2ef16c0da66e
Signed-off-by: xuhuagen <huagenx.xu@intel.com>
Reviewed-on: https://review.gerrithub.io/422194
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib5e977b0bad15af7a2a71000c1fc4861b5b5b0af
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/424465
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The default directory for dpdk on centOS7, fedora28, and ubuntu 16.04 is
/usr/share/dpdk/x86_64-default-linuxapp-gcc. update autotest_common.sh
to reflect this. Also, add a build pool flag to control whether or not
to ignore that direcory.
Change-Id: I618b902ed04dd4a9f63c5bd2014a9fbb7fcbf91b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/424596
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Config file pathnames have been possible on the command line
for a very long time, and all of the SPDK testing infrastructure
uses it. The default pathnames were added a very long time ago,
and now can cause weird issues like conflicting with --wait-for-rpc
when an INI config file is not passed on the command line but is
pulled in by the default pathname instead.
So remove the default pathnames.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia914ff1c9321235f79f8cc9a054ed7f099340151
Reviewed-on: https://review.gerrithub.io/424606
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This was added a long time back for tracking an rte_mbuf
whose buffer was a different rte_mbuf - all related to
a userspace TCP stack that is no longer in development.
The concept isn't useful now, so remove it to reduce
the complexity of the tracing code.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I310e492eba7f55df242bb29d82fb19f6daee1f51
Reviewed-on: https://review.gerrithub.io/424565
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This issue is related to Clang assuming that global variables can be
modified from their original value.
Change-Id: I576a4af7e379a951a9f971850391c7e17145df87
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/424717
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a string name used for debugging only.
Change-Id: I9827f0e6c83be7bc13951c7b5f0951ce6c2a1ece
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/424127
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This is in response to a scan-build error introduced with clang 6.0
Change-Id: Iee5a2538ec9a6575e5b3087bf43b8ded5d099fe7
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/424576
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
The type of malloc used in some of the NVMe functions changed and has
re-introduced some scan-build failures.
Change-Id: I2055260c256429a1a2c6404a6d87605807d4170e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/424573
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a variant of spdk_trace_record which takes a tsc
parameter. This allows callers who already have the
current tsc to pass it in as a parameter, saving an extra
rdtsc in the trace library.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I074f4f9fdbe649ad6717f932982a574bc61f2997
Reviewed-on: https://review.gerrithub.io/424277
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This reduces overhead of spdk_trace_record calls when
tracing is not enabled.
While here, remove a couple of unit test stubs for
spdk_trace_record that weren't needed anymore.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2cbb91e7d3311d95444d663f466d846676d2dcce
Reviewed-on: https://review.gerrithub.io/424276
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This makes it easier to debug failures.
Change-Id: Ic1099ec08308d5e50dd9fe03798dc0873579f2cc
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/423961
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There could be cases (especially in virtualized and/or test
environments) where we could accumulate significant skew in
the timeslice frequency. Rather than depend on the application
framework to try to guarantee the rate of timeslice poller
callbacks, keep track internally of the last time the poller
was invoked. If/when we accumulate and detect skew equivalent
to one or more timeslices, increase the allowed IO and bandwidth
of the next timeslice to accomodate.
Since bdev poller now calls spdk_get_ticks() to do accounting,
this patch also fixes up the increment_time() unit test function
and the test env layer to properly increment the fake TSC.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iba301ddc0fb3d02042106a8bf6e4a6a9a84dc263
Reviewed-on: https://review.gerrithub.io/423580
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
I had to make small modifications to one test in the dev_ut.c file to
prevent a memory leak error. However, changing the index in this test
from -1 to 0 has no effect on the coverage.
Change-Id: Ia8a475aaa41118f072a5d9006bab9d9c84b4a10a
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/424126
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
thread_ut.c: ensure that the channel context is non-null
util: get rid of a couple of uninitialized value errors.
Change-Id: Idbaad4efea14acd7ae8f98b60aa514e45213a134
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/424124
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Set the bdev->optimal_io_boundary to the strip size, and
set split_on_optimal_io_boundary = true. This will ensure
that all I/O submitted to the raid module do not cross
a strip boundary, meaning it does not need to be split
across multiple member disks.
This is a step towards removing the iovcnt == 1
limitation. Further improvements and simplifications
will be made in future patches before removing this
restriction.
Unit tests need to be adjusted here to not span
boundaries either.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I08943805def673288f552a1b7662a4fbe16f25eb
Reviewed-on: https://review.gerrithub.io/423323
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Splitting a 1TB unmap into individual 64KB unmap commands
(for a RAID volume with 64KB strip size) would be awful -
the RAID module can be much smarter about this.
So back out the changes for splitting I/O without payload.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I24fe6d911f4e3c9db4b2cb5d66c7236a5596e0d9
Reviewed-on: https://review.gerrithub.io/424103
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Valgrind found this on my system. The unit test itself
was passing correctly (we wrote uninitialized data and then
successfully read back the same uninitialized data) - but
Valgrind doesn't like code that makes any decisions based
on reading uninitialized memory.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I762f5dd0cb368328bd5eba9cecf7db404b457fad
Reviewed-on: https://review.gerrithub.io/424109
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
One was an API issue, another was a dereference of a null pointer that
resulted from a possible call to a stubbed function in the unittest
common code, and the last was an erroneous use-after-free due to
scan-build apparently not understanding TAILQ_REMOVE.
Change-Id: I9111817e9e990ff6e388351c08f34c2e945df62d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/423959
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fixes a use after free error in bdev/bdev_ut
Fixes an uninitialized argument value error in mt/bdev/bdev_ut
Adds extra checks in the spdk_bdev_part_construct code
Fixes a dereference of null pointer error in bdev/vbdev_lvol_ut
Change-Id: I1eaa6ebfec0a36a0d910504c70b16ccc651de22a
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/423923
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This removes assumptions about hte lifecycle of these variables relative
to the parent bdev and allows us to avoid ambiguity about who
is responsible for freeing these buffers.
Change-Id: Ia996653562d532fa1501faf21d3fdff85033ab33
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/424105
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This is causing a fair number of failures in both the
Chandler and Jenkins test pools. This was added fairly
recently, so comment it out for now while it is debugged
further.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5d227252e27265c2b25ad7e76dd54d6c0501b8c4
Reviewed-on: https://review.gerrithub.io/424132
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When a raid bdev is constructed by JSON-RPC construct_raid_bdev,
information about config and slot can be passed to
raid_bdev_add_base_device() and raid_bdev_can_claim() doesn't have
to be called.
Hence extract raid_bdev_can_claim_bdev() from raid_bdev_add_base_device()
and put it to raid_bdev_examine().
Change-Id: I92e02bf3661cb97b691246f32198ba946810d96c
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/423618
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
raid_base_bdev_config is suffciently descriptive as name and so
"name" can be used as the name of the base bdev.
Other structs have used "name" as the name of bdev.
Change-Id: I090ef541a84fd14d9ec3bfebbdc96ae649709551
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/423614
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
Since IOAT is disabled by default, that option can be removed from
any config file used in tests.
Change-Id: I681bd1eb6a8c81328ba580be75b418994ccd85e3
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/423357
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Some test scripts may temporarily disable errexit -
for example, trying a command several times until
it succeeds. In these cases we don't want to
print a backtrace every time that command fails.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I481f50b046eb13e23f7048672281ec7d62a573a2
Reviewed-on: https://review.gerrithub.io/423921
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Use 512 byte reads (instead of 8KB) to ensure we can
hit the expected IOPs rate.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I204dda9bf5cc168a3f080e6716cacc71fd8952cd
Reviewed-on: https://review.gerrithub.io/423583
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This eliminates some messy fio output parsing, and has the
side benefit of testing the bdev_iostat RPC code.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia538cd81730704177b137c0c203d557fd640c955
Reviewed-on: https://review.gerrithub.io/423589
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Chen, LongX O <longx.o.chen@intel.com>
In fedora 27 4.17.11 kernel, there is no ib_ucm module.
So let modprobe pass if no ib_ucm.
Change-Id: I793802f65263f0f8e3ef0097250fd9ca3cc9ffdc
Signed-off-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-on: https://review.gerrithub.io/423625
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ifaa33f85914e8b3abba424f1bfd3a6c03d7ca236
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/423750
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds UT for IOV split operation.
Next patch will refactor split of vectored read/write a little.
Change-Id: I77fbaf042fd894b23ad5ae846f54c28498e8e62b
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/422768
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We need to sleep for a small amount of time after the
./nvme connect since the connection will not appear
immediately.
Remove unnecessary sed commands - this script
did not modify spdk.conf before running these tests,
so it shouldn't be modifying spdk.conf afterwards.
"kill SIGINT" is not valid - a process ID must
be specified. Just exit with error instead.
Also clean up a typo.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I03b659844c8cfb301b734586eb84b18fc665dc01
Reviewed-on: https://review.gerrithub.io/423743
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
For secure iSCSI targets, dynamic reconfiguration of CHAP secrets is
must to have.
Currently CHAP secrets are loaded for every CHAP authentication
operation. The current implementation will not work correctly
when CHAP secrets in the file are changed dynamically.
If SPDK loads CHAP secrets from the file only at boot and they can be
configured by RPCs, user can change CHAP secrets safely during run time.
Even if there are any users who expect dynamic reconfiguration of
CHAP secrets based on the current implementation, if we provide
this better alternative based on RPCs, they will be able to continue to
satisfy their requirement.
This patch change the current implementation so that SPDK loads
CHAP secrets from the file once at boot and uses them in memory
hereafter.
Besides, use fixed size buffers to hold CHAP secrets.
Previously dynamically allocated buffers by strdup() had been used,
but it required many nomem checks and should be avoided.
Other iSCSI targets/initiators have used fixed size buffers and SPDK
follows others.
Set the size of buffers for both user names and secrets to 256 (the
last byte is for NULL termination). 256 is sufficiently large
compared with others.
CHANGELOG will be updated in the separate patch because new RPCs will
be added instead.
Change-Id: I499e792817c2ed01c3d970bbd3d34a6b1fccf65b
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/421463
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
- Move most of the target opts from nvmf_tgt to nvmf_transport.
- Update transport create functions to pass in transport opts.
- When transport opts are NULL in transport create function, use
target opts. (for backward compatiblity)
- Part 1 of 2 patches. Part 2 (to follow after part 1 accepted)
will allow independent creation of transport with specific opts
while maintaining backward compatibility with current apps and
rpc configuration that still use the add listener method to
create a transport.
Change-Id: I0e27447c4a98e0b6a6c590541404b4e4be879b47
Signed-off-by: John Barnard <john.barnard@broadcom.com>
Reviewed-on: https://review.gerrithub.io/423329
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
These tests don't currently require the env mockup,
but they will in a future patch.
Change-Id: Ibf311f198a291f825a83e7b89708cd2442f35f7a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/423183
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If fio.py fails, we need to fail the test. Running
$fio_py in $() eats the return code and effectively
does no QoS data checking - so it would always pass
the test.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9960463e4d980784dd2622cfee658ea280ddb557
Reviewed-on: https://review.gerrithub.io/423424
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
--skip-alias is not supported in all versions of which.
While here, explicitly import CalledProcessError - some
versions of Python didn't seem to mind, but it's not
true for all versions. Also print related error
messages to stderr instead of stdout - this helps
with debugging since in some tests the stdout is
redirected to a file.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7637adc36da6290ece28c77b3398185191347eef
Reviewed-on: https://review.gerrithub.io/423414
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This functionally tests bdev_io_wait queuing in lib/scsi
when there are no remaining bdev_io buffers in pool.
Change-Id: I27d904394da9aa426cfe50e48c719a476966eba3
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/423205
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Get the path of fio binary dynamically.
Change-Id: Ieb29bdfec33716828339a60e67dfe786e8ad278a
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/423057
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
According to the purpose of the lists, state_link and global_link
will be enough to understand the purpose well.
Besides, in raid_bdev_remove_base_bdev(), if any entry is not removed
during iteration, TAILQ_FOREACH_SAFE() is not necessary. Hence
change TAILQ_FOREACH_SAFE to TAILQ_FOREACH for this case.
Change-Id: I3022c58faf96721df9241e07dbb5a06d7de89e70
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/423056
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
struct raid_bdev has a pointer raid_bdev_config to its configuration,
but raid_bdev is duplicated between raid_bdev and raid_bdev_config
and just config may be enough as a name.
Change-Id: I77f6a69b913cd540c22f05803c486a4caf103f24
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/422923
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
base_bdevs_io_channel is good but base_channel may be enough and
fit other bdev modules.
Change-Id: I67a1d224f1ef4ca1fc048b4325333f2552a37150
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/422921
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
raid_base_bdev_info is sufficiently descriptive as name and so
names of member variables in raid_base_bdev_info can be simplified.
Change-Id: I759a758ec0f3ac21de767ad379a902f1b04cc66d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/422919
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
A number of modules (RAID, logical volumes) have logical
"stripes" that require splitting an I/O into several
child I/O. For example, on a RAID-0 with 128KB strip size,
an I/O that spans a 128KB boundary will require sending
one I/O for the portion that comes before the boundary to
one member disk, and another I/O for the portion that comes
after the boundary to another member disk. Logical volumes
are similar - data is allocated in clusters, so an I/O that
spans a cluster boundary may need to be split since the
clusters may not be contiguous on disk.
Putting the splitting logic in the common bdev layer ensures
bdev module authors don't have to always do this themselves.
This is especially helpful for cases like splitting an I/O
described by many iovs - we can simplify this a lot by
handling it in the common bdev layer.
Note that currently we will only submit one child I/O
at a time. This could be improved later to submit multiple
child I/O in parallel, but the complexity in the iov splitting
code also increases a lot.
Note: Some Intel NVMe SSDs have a similar characteristic.
We will not use this bdev stripe feature for NVMe though -
we want to primarily use the splitting functionality inside
of the NVMe driver itself to ensure it remains fully
functional. Many SPDK users use the NVMe driver without
the bdev layer.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ife804ecc56f6b2b55345a0d0ae9fda9e68632b3b
Reviewed-on: https://review.gerrithub.io/423024
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch series will refactor/improve CHAP authentication and consolidate
it into iscsi_subsystem.c.
To get better reviews, this patch just moves spdk_iscsi_chap_get_authinfo()
from iscsi.c to iscsi_subsystem.c.
Change-Id: I953f5c851bfe67dc02f6f82966132b4216e79228
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/422764
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Those tests check behaviour of nvmf layer when there is no remaining
bdev_io buffers in pool.
Change-Id: Ic10534108b9d71c00d534407348f1672a74926c4
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/421696
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2bc4dec10500f1148c7869e9625470fe5f0eaf54
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/423038
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A new unit test in an upcoming patch will initialize the bdev
layer separately, so modify the existing tests now so that
they properly cleanup the bdev layer after the unit test
that initialized it is complete.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie00837a90391ca4d0dd578e978fb26483fe5c0cf
Reviewed-on: https://review.gerrithub.io/423023
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The short version of this argument has been removed from production.
Change-Id: I52631c4239f6863157e73a9bfd5196526c9490aa
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/422915
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
New function was added in bdev layer to allow
handling spdk_bdev_io buffer exhaustion.
This patch adds that functionality to nvmf bdev.
Change-Id: I5b915abcccec930c3eb684d95bc64482e7887af5
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/418937
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4b2fa51608ad8504b1db6d039efa59f8659e5025
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/421695
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fix issue #393.
The memory is not completely released, there are mutiple malloc
list, but only the last one is released. So I free all.
Change-Id: I14a583871811b54017728b6a7e92982cd75bd6b1
Signed-off-by: WangHaiLiang <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/422682
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
So we don't need to allocate memory (maybe failed) just for free other
memory.
Change-Id: I2c83f6acc2aa6ed79455bff90f952a2e70b44d59
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/422203
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
'-s' option is usually associated with the memory size,
but our ioat/perf and nvme/perf use it for io size.
To keep those consistent:
'-s' option (io size) was be changed to '-o'
'-d' option (mem size) was be changed to '-s'
Change-Id: I97cef4c0a4e6e902277dd50dfb43bde420a6427e
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/422654
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
'-s' option (io size) had to be changed to '-o' as it conflicts
with mem-size.
Change-Id: I7486f30ce7d836a6e465e07f723877facb4f8536
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/421736
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This makes us exit immediately on '-h' or any parsing error.
Change-Id: I6bd2fc9238bcecba6df1e62a8db42ce79ad73524
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/422686
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
The intents of these arrays was to keep track in the
bdev layer of all base<->virtual bdev relationships -
i.e. which member disk bdevs make up a RAID bdev,
which logical volume bdevs are associated with a
bdev that contains an lvolstore, etc.
Currently none of this is used however. And trying
to keep track in the bdev layer instead of asking
the bdev modules for the relationships has a number
of complications. Early one, we tried to do this
with TAILQs - but that doesn't work since this can't
be done with a single TAILQ_ENTRY in the bdev
structures. So we moved to arrays - that works a bit
better, but then the pointer arrays have to be
realloc'd which isn't ideal.
The biggest problem though with these arrays is that
they held bdev pointers - not bdev descriptor pointers.
It's not really valid to access bdevs without a
descriptor - the descriptors are what make sure active
references are accounted for when a bdev is hotplugged.
Of course the bdev layer knows when a bdev is getting
removed and could go and do the updates to these
arrays separately - but that just seems very convoluted.
So for now just remove these arrays completely. If
there is a future need for the bdev layer to
understand relationships between bdevs, we can add
module APIs so that the generic layer can ask
the modules about the relationships.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I99ef1068240bff1262f64f234260cf2fb44df51d
Reviewed-on: https://review.gerrithub.io/420932
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
These weren't needed for static linking, but popped
up as problems with some upcoming patches enabling
individual shared libraries.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iba13926bd504831046eeb48da8f35e7df9ef8801
Reviewed-on: https://review.gerrithub.io/422442
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
These functions enable a user to run one of the Nvme-oF tests directly
from the command line without having to manually invoke all of the setup
we typically do.
Change-Id: Ib0baa77c08abb24c2fa2a1e21cf38ac613d663e0
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/422336
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
When an SPDK application shuts down, the bdev layer will
automatically unregister all of the bdevs to ensure they
are properly quiesced and cleaned up.
Some modules may want to perform different operations when
a bdev is destructed during normal runtime vs. shutdown.
For example, for lvol, when the last lvol is cleaned up,
it should unload the lvolstore, release and close the bdev
that contains the lvolstore. You never want to do this
during normal runtime though - it is perfectly valid to
have an lvolstore that contains no lvols. RAID and future
bdev modules such as multipath have similar use cases.
So add a new bdev module callback named "fini_start".
If a module specifies a function pointer for this callback,
the bdev layer will call it before it starts the bdev
unregistrations.
This enables some future patches to the bdev layer such
that it will always unregister block devices that are not
claimed (i.e. logical volumes) before block devices that
are claimed (i.e. the bdev containing an lvolstore).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6e87f5c2b27f16731ea5def858f26e882a29495a
Reviewed-on: https://review.gerrithub.io/421175
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
script
socat is used in iscsi_tgt's libsock test
Change-Id: I027930a99e58ff9862a540d5eed3b1a50de28a93
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/422255
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
1.Refactor the run_test function which used to add detailed information
during run test suites and test cases.
2.Refactor the lvol feature test scripts to make sure their log is the same.
3.Users can use "run_test suite command" to run test suites
and use "run_test case command" to run test cases.
4.Update the vhost and lvol test as example.
Change-Id: I7b6387019a861bd1c4f89b9a7712e53150aea8fa
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/403610
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When adding one bdev to NVMeoF Namespace, subsystem
will claim the bdev to prevent shared access to the
same bdev, for nested blobstore tests, this will
fail for NVMeoF test.
Fix the issue #396
Change-Id: Ifade610dc821ae0a7535b1f3f1ef5a44ca43133d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/421136
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Decrementing struct spdk_jsonrpc_server_conn::outstanding_requests
should be atomic since this variable are accesed from multiple threads.
Istead of that just route the request back to the server thread with
nothing to send.
As we are here change spdk_jsonrpc_server_send_response() to take only
struct spdk_jsonrpc_request parameter.
Change-Id: I9b856e7d530355cea43a29f58f4f9405e7e35fc2
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/422124
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In RDMA, qpairs can't be removed from poll groups because
the poll group defines the completion queue. So don't
allow this operation anymore, even if it were theoretically
possible on other transports.
Change-Id: I69a3d1b336decd2d25e43ddea94f8b2095ef662f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/421174
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Added new test case 702 for tasting lvol stores, similar to tc700
but with different lvol store cluster sizes.
Change-Id: Id33fc6ff9520ed21219f49f161bd41c4f6b71848
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/420758
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If lvol tasting test cases fails for some reason, lvol store
is keeped on on NVMe bdev making it problematic to remove.
Fails on AIO bdevs are easier to handle.
This also remove usage of .conf file in this test.
Change-Id: I58da80defa7a00e95084e34d6447b890272586ec
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/420898
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
lvol store and change its name to get_lvs_divided_size
- add default values for get_lvs_size and get_lvs_cluster_size
Change-Id: I86c0a878975f6e14cd0e6c64d764a0ec2973dd5b
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/420773
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
--wait-for-rpc can be used instead.
This parameter will eventually become obsolete,
so let's remove the short version. It will be
exclusively used for "workload" in perf apps.
Change-Id: Ib4b7001d0e756349b05788278c894d622bc89790
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/421863
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The config now has to be provided with '-c' or '--config' param.
Change-Id: I999c84d899b1e15cd4f34120016f6a18fc0e84c9
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/421734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In order to allow specifying a custom cpumask
we have to prepare the environment a bit.
Change-Id: I45d2c960c05c7583cc2781c985760813ef1f2b77
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/421733
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Memory for socket structure is allocated in the selected net
framework but freed in the libsocket on the higher level.
This patch moves memory free to the net framework implementation.
Change-Id: Ia3d4e1553a858a38beb390986e9af105778c12c7
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/421587
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When testing test/nvmf/lvol/nvmf_lvol.sh in test pool, Linux
reported error with "Failed to write to /dev/nvme-fabrics:
Cannot allocate memory" sometimes when connecting to target.
While here, reduce the test cycle count to avoid such error.
Change-Id: Ie9283d3e9ad2d13aadf2255225b0ff1184bed267
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/421665
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Terminating master connection will terminate other connections so can't
use test/vhost/common/vm_ssh.sh to connect from two terminals. This
patch terminate master connection only if guest OS is not booted.
Change-Id: I711fed525f1ce813c3aa3d03255a1b32513d24bd
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/421684
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Unify the regular mocks and the pointer mocks. Simplify
several of the #defines.
Change-Id: Ica8c69dbb70a685a55b5961b73fd7872f451c305
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/418884
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This was leaving soft-roce nics around from run to run.
Change-Id: Ia1114f40aeeae3332aa30310235feab14a1006d4
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/421653
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
sgdisk is a part of package gdisk, not a package itself
Change-Id: I214f9720aaeda88006c40e915960c2e1d5cd87b3
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/421496
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Fix the issue #386.
Change-Id: I2d7434d6204a7f074f985584fb18b4f5f1f23f5c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/421070
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Fix the issue #383.
Change-Id: I18bd86b5331650c24d5d76ecb1aa40f5e7061d01
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/421071
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Claim the block device when adding it to a new Namespace,
and prevent the block device to be added twice for other
modules and Namespaces. Also remove the test that using
same block device over different Namespaces.
Fix issue #371.
Change-Id: Ib7ce18e9fde4a15c0f19ce9e28e69145e54570e0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/420472
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
During IO submission, raid_bdev can be get by bdev_io->bdev->ctxt.
Hence holding raid_bdev in raid_bdev_io_channel is duplicated.
Change-Id: I722432718aca8c5846541816b6ecca56821d77f6
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/421182
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Locating spdk_bdev structure to the beginning of raid_bdev structure
will simplify the hierarchy and match other bdev modules.
Change-Id: I1bfbf773bc96a4f144e6bff772ade05bb42762e9
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/420818
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Some functions in autotest rely on eu-readelf binary but only
elfutils-devel package was installed in vm_setup.sh script.
Change-Id: Id51ed672a0ef309121e1dddc2a1c8a360f3940c5
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/421189
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Readelf psargs field holds file path up to 80 chars.
Above 80 chars path is truncated and --wide option does not
enable displaying longer path.
Added checking if the path was not truncated by testing if
file path from psargs exists. If it does not - check rest of
eu-readelf output for a matching path and use it instead.
Change-Id: Ia89b41115803e2463e2030e739121ce1fa8039e0
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/421100
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
These changes were modified by the shfmt tool that supports Google's Style guide.
Change-Id: I27dd8ba91afc0043b3ce5f0eb6121a3c11789fab
Signed-off-by: chenlo2x <longx.o.chen@intel.com>
Reviewed-on: https://review.gerrithub.io/408147
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The poll group pause, resume, remove, and add functions are only called
from the subsystem_state_change_on_pg function. Previously, they would
return immediately and the state change would move on to the next
channel. However, some of these functions (specifically remove) kick off
asynchronous APIs and we should not iterate past them until those
asynchronous operations complete.
Change-Id: I78804273b39f2d171ba26ac4478ad515356833f3
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/419289
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Daisuke Aoyama originally contributed to istgt, the
iSCSI target in FreeBSD. The SPDK iSCSI code is
originally derived from that. Due to copy and paste,
some incorrect copyright attributions have been added
to other files that do not derive from istgt, so
this patch removes those.
It is doubtful, at this point, that there is any code
whatsoever that remains from the original istgt, but
we can revisit that at a later time.
Change-Id: I207e1e6b99d271e2f12690be90a96f7d0c113af7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/420679
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Use strdup for all strings allocated by JSON decoder and free them on
all paths.
Change-Id: Ia30d32c2fd6bd79f62588ca19bd3bb093d38a502
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/420325
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
RAID is experimental for 18.07, pending iov support
which is needed for vhost. But we need to at least
build RAID in our tests, and run some basic
bdev tests to ensure it doesn't quickly become stale.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I68bb45df6d00e31dc96ed8bc902b61a5ef699ba2
Reviewed-on: https://review.gerrithub.io/420678
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
For front-ends like iSCSI (and NVMe-oF in the future)
which want the backend to specify the data buffer, the
RAID module doesn't copy the pointer to the allocated
buffer from the child IO back to the parent IO. It
really can't copy the pointer - the child IO owns it
and will free it.
So the RAID module needs to allocate the buffer first
and then pass it down.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3b1eceac9b1cdd26130e59e1d400c9869a19f881
Reviewed-on: https://review.gerrithub.io/420677
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Previously cluster sizes only set as default were tested,
this patch adds test for load when different cluster_size is used.
Change-Id: I585adff25c81de809435ef235314cd4b8b116261
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/420607
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
At times, it may be necessary to free requests without completing them.
For example, when freeing a qpair, one needs to free the AER sent from
the host before deleting the qpair. It is important not to send a
completion for the AER because:
1. According to the spec, this will trigger the host to send another AER
2. No Asynchronous Events have occured, so we should not complete the
AER.
Change-Id: I92e163f0fed0ee2bc942569a647cb3c1967edec9
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/419732
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
fio.sh still uses conf file because hot remove is not yet imlemented
in rpc calls
Change-Id: If9066e6b24e1e3d381876909fb9e00000a302e02
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/419125
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Used in the ceph tests.
Change-Id: Iea7bda61e792542aae2dff09b0ac321bd4073cc1
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/420499
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
- specify spdkcli tree branch for match test. Test only
specified branch
- move match files to subfolder to keep it organized
Change-Id: I7796ff13d38b2bfd500fd71442bcb6e6fa95df01
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/420517
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Need to mock spdk_mempool_get() to test code path when it fails.
Also added spdk_mempool_get_bulk() to test env.
Change-Id: I7f64230c9841215a404149e9a48ad4bf8a63822c
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/420110
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since delete_bdev should be used only for debug purpose,
this patch adds delete call specific for virtio bdev.
This is generic call for both - blk and scsi.
Scsi specific call has been removed.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3ed629942e9ef6067b488d94ca508b40e9e74f42
Reviewed-on: https://review.gerrithub.io/417008
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Since delete_bdev should be used only for debug purpose,
this patch adds delete call specific for NVMe bdev.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib9a0475d735af2616a3005d04530ca825ece8a52
Reviewed-on: https://review.gerrithub.io/416546
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Since destroy_lvol_bdev was implemented, it is now more convinient
to call destroy/unload for lvol store explicitly.
Rather than using lvs struct to pass a request checked on each
lvol close/destroy.
Change-Id: I56ee626e96f8752909d1584a20fe3345c5607fdc
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/420285
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There's no reason this test needs to use all of the
hugepage memory allocated in the system.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iab575d322f2d1cb6452e5ebd7705aee9353a6fba
Reviewed-on: https://review.gerrithub.io/420456
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
There is no reason for this test to consume all of
the huge pages on the system. 256MB is sufficient.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id1813f4ff6a1fdd1d65fdcc76f6919f6e73b988f
Reviewed-on: https://review.gerrithub.io/420309
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
remove 'rm -f /tmp/nvmf.conf' as conf file is no longer used in
this test.
Change-Id: I4889f10df05acdbecea148907f258d5f2925fe7d
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/420364
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This test may timeout (if one is set) on systems
with large physical NVMe drives. Creating the filesystem
takes just too long and causes fails.
Change-Id: I961e56085ef5735d189c31bcba3f2a203dc366d2
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/420207
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It is not an error if bdev is smaller than cluster size so convert this
error to infolog. This fixes false error message dring examine process.
To return proper error message when creating blobstore using RPC the
_spdk_bs_alloc was adjusted to return errocode that is propagated up and
converted to "No space left on device".
Fixes#316
Change-Id: Ic9803720a55125fcfa34263346f2d9e1aae03a53
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/420054
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch fixes lvol delete behaviour.
First, we look if there are any dependencies that disallow lvol deletion.
If there are any (i.e. dependent clones) we fail.
Otherwise we delete lvol and unregister associated bdev.
destroy_bdev no longer deletes lvol.
Fixes#345
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I99e6abded2ed3ae2742103f81fc7eb937ad1cab4
Reviewed-on: https://review.gerrithub.io/407402
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Freebsd complains:
`error: redefinition of typedef 'rte_mem_event_callback_t' is
a C11 feature [-Werror,-Wtypedef-redefinition]`
Those typedefs are already defined in rte_memory.h, we can use
them directly.
Change-Id: If87dd0ad93578bcb22a1d07e1c3433801e2bd5bc
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/420276
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In part_dev_by_gpt(), stop_nbd_disk is missing and it looks that
this has caused solid/intermittent CI failure in the nbdjson test.
Change-Id: I46b14fa3b7c91547b88f49b28d0cba252b00e8a2
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/420123
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously on all ut_lvol_* tests, creation of lvs was mocked.
There is no reason to keep it that way instead of creating
actual lvs using same code that is unit tested.
Change-Id: Id0a7816da0c195d596a6da516471b3f46bb4e475
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/419562
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This variable was unnecessary since one within lvs->bs_dev
can be used to verify functionality and within stubs.
Change-Id: I43e12236e08f70381e0da5730b760db4ec3c577b
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/419561
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Those did not affect the tests, thus can be removed.
Change-Id: Ic1a23d4a40a0b5af1a2aff770e6eb4f0614c8f04
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/419560
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Added proper paths for examine:
- if lvs loaded, do spdk_lvs_unload
- if lvol created, call spdk_lvol_close instead of spdk_blob_close
Change-Id: I77a2905417d1c53f36b96da3fbea2679d9a2f56d
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/419558
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
and construct_lvol_store_with_cluster_size
test plan into script.
Change-Id: Ie1cebee093192c0fe0845b42f278b8a8f4cea5a3
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/419518
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In iscsi_tgt tests, when error is caught by trap command, temporary
files are not deleted. By this patch, delete temporary files in trap
handlers.
Change-Id: I317a102db346b345c3d25a4977528c737b861748
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/419311
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Followup to earlier fix, didn't see this until after fixing bdev
the rest of the way...
Change-Id: Idc663ffe6a90e6cb3511e4e703f2e9c667a3eac4
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/419445
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
RPC method (nvme-passthrough-cmd) needs base64 to
transfer binary buffer of nvme-cmd through Json text.
Change-Id: I50b9d0efca97da45d6d4fd2a1b53b74811947191
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/417805
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Move logical volume tasting test plan into script.
Change-Id: I2da9ab9348a01df86489c81b6debea4f564cc318
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/419383
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This patch prevents to copy cluster data when there is not
backing blob to improve cluster allocation performance
in thin provisioned blobs.
Change-Id: Ie766d2e5274daa74c2b13b2198a20205e3417467
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/417938
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Before this patch when serializing extents,
unallocated clusters were treated as separate lba.
This caused metadata to grow without need.
Change-Id: I5d66466dda5f5e6d4d53f4ed5bd0bac18c74be96
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/419180
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When hot removal of a LUN is started, callback is called for each
iSCSI connection which accesses the LUN. Callback checks all transfer
tasks complete and then close the LUN.
If the connection clears all transfer tasks before getting all responses
to them from the initiator, the initiator continues to retry data write.
Hence the connection have to wait until all transfer tasks complete.
Change-Id: Iad9063673cfedbd78758890d55a4254512e4fca4
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/417199
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Use a descriptor got by opening the LUN to allocate IO channel of the LUN.
This requires opening the LUN is done before allocating IO channel of the
LUN.
Use the descriptor to free IO channel of the LUN too.
Additionally, assert is added to the close LUN function to check if
IO channel is freed before the last close LUN function is called.
Change-Id: Iafb2f9ce790fff25801ea45b3286f3e26943807b
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/417807
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Root cause: we did not check the status of the bdev_io
in bdevperf_verify_write_complete function.
So the fix is that: if the status is failed, we should
not do the read check again, but just complete this I/O.
Change-Id: I3dc796abe47c3f2e7eeb2b6eb0ebc0338122479d
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/419338
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Raid module:
============
- SPDK raid bdev module is a new bdev module which is
responsible for striping various NVMe devices and expose the raid bdev
to bdev layer which would enhance the performance and capacity.
- It can support theoretically 256 base devices (currently it is being
tested max upto 8 base devices)
- Multiple strip sizes like 32KB, 64KB, 128KB, 256KB, 512KB etc is
supported. Most of the current testing is focused on 64KB strip size.
- New RPC commands like "create raid bdev", "destroy raid bdev" and "get raid bdevs"
are introduced to configure raid bdev dynamically in a running
SPDK system.
- Currently raid bdev configuration parameters are persisted in the
current SPDK configuration file for across reboot support. DDF will be
introduced later.
High level testing done:
=======================
- Raid bdev is created with 8 base NVMe devices via configuration
file and is exposed to initiator via existing methods. Initiator is
able to see a single NVMe namespace with capacity equal to sum of the
minimum capacities of 8 devices. Initiator was able to run raw
read/write workload, file system workload etc (tested with XFS file
system workload).
- Multiple raid bdevs are also created and exposed to initiator and
tested with file system and other workloads for read/write IO.
- LVS / LVOL are created over raid bdev and exposed to initiator.
Testing was done for raw read/write workloads and XFS file system
workloads.
- RPC testing is done where on the running SPDK system raid bdevs
are created out of NVMe base devices. These raid bdevs (and LVOLs
over raid bdevs) are then exposed to initiator and IO workload was
tested for raw read/write and XFS file system workload.
- RPC testing is done for delete raid bdevs where all raid bdevs
are deleted in running SPDK system.
- RPC testing is done for get raid bdevs where existing list of
raid bdev names is printed (it can be all raid bdevs or only
online or only configuring or only offline).
- RPC testing is done where raid bdevs and underlying NVMe devices
relationship was returned in JSON RPC commands
Change-Id: I10ae1266f8f2cca3c106e4df8c1c0993ddf435d8
Signed-off-by: Kunal Sablok <kunal.sablok@intel.com>
Reviewed-on: https://review.gerrithub.io/410484
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
When multiple LUNs are attached and spdk_clear_all_transfer_tasks() is called with
a LUN, all tasks whose target is the LUN are removed and there will be room to start
queued tasks for other LUNs. However currently no migration is done.
Add UT code to verify the fix too.
Change-Id: I082d370ab86a46e5b4a74a16293a572fae663add
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/418765
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Following script allows user to run tests which
follow test cases used in SPDK Vhost Benchamrk tests.
Change-Id: I4e69b13d86165fcf37c678b095c2a11817476465
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/416527
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This also save CWD on init so socket path is no longer relative.
Change-Id: I303401fe0340f0bc2ea5e4ba468361f68ea84c3d
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/419067
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
In the event that something went wrong earluer, we shouldn't
try and touch memory that was never allocated.
This is at least a partial fix for issue 363.
Change-Id: I5174c845fb89f6d386877758fdc99178704ff73c
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/419039
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Currently R2Ts per connection are managed by an array
outstanding_r2t_tasks and two tailqs active_r2t_tasks and
queued_r2t_tasks.
These are complex but there is no UT code for them.
Added UTs are not perfect but it may be helpful to keep the
quality and understand the implementation.
Change-Id: I2a0d19d8888e7d3beb5918a1b82b657f4775e01a
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/418758
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
As requested in GitHub issue #361, we should have a way to control
whether the SPDK-patched nvme-cli tests are executed.
Also add a report_test_completion call for the NVMe-oF nvme-cli test
so we can easily track whether it executed (the local PCIe nvme-cli
test already had a completion).
Change-Id: I70c26bcf2489ccfa563214a9723603aa705be7ab
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/418866
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: John Meneghini <johnm@netapp.com>
Reviewed-by: <ed.rodriguez@netapp.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This is passing a struct lvol_task that is not nested inside a bdev_io
context, which is assumed by lvol_op_comp() in the actual lvol code.
There is no problem currently, since lvol_op_comp() happens to not
dereference the bdev_io except inside of mocked functions and inside a
SPDK_INFOLOG() that does not get executed in the unit tests right now,
but this would break if the lvol code ever actually used the bdev_io
pointer.
Change-Id: Ic3b67f4ecff47e5a98a5be8a83c2524573113aa9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/418735
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ief3a1fbde5d8eabefa87c39feefe3d496e3a5369
Signed-off-by: Ed Rodriguez <ed.rodriguez@netapp.com>
Signed-off-by: John Meneghini <johnm@netapp.com>
Reviewed-on: https://review.gerrithub.io/418236
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ie433edd7c72f84b62c17bacebd31d61ffa6f30ab
Signed-off-by: Ed Rodriguez <ed.rodriguez@netapp.com>
Signed-off-by: John Meneghini <johnm@netapp.com>
Reviewed-on: https://review.gerrithub.io/416052
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Used in crypto unit tests.
Change-Id: I7d7e31e9030c238cb539b9fcf0936e588c1a4211
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/418320
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
New function was added in bdev layer to allow
handling spdk_bdev_io buffer exhaustion.
This patch adds that functionality to scsi bdev.
Change-Id: Ia6a5be871ae09a4d1166991925f0a44f3b355bdd
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/417032
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
SCSI reset function return code is not used,
so there is no need for it to have return code.
Change-Id: Ib647109c75b1546675d2601fa00004e1ef186024
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/418615
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds UT for IO operations, as preparation for
next patch in series handling bdev_io buffer exhaustion.
Change-Id: I139cb8811453576efd1acddd15ad2a3672995f09
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/417452
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add unit test for API function spdk_nvme_qpair_add_cmd_error_injection()
and spdk_nvme_qpair_remove_cmd_error_injection().
Change-Id: Ia1f0baf94c3ab1b9a03c6c2b4796346cbe120a62
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/416905
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: I939aef31473b6a7acae879fb5b03a62154390cac
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/418729
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is verified on QEMU NVMe which merged the related patch.
Change-Id: I7c62d7a91350e0a877d1c3651796c38b55122f98
Signed-off-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-on: https://review.gerrithub.io/417077
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Matias Bjørling <m@bjorling.me>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
qpair_disconnect has previously presented an entirely synchronous API.
However, it relies on other asynchronous operations to complete its
task. By giving it an asynchronous API, we can avoid possible race
conditions. Patch 1 of several.
Change-Id: If9e26ee70ae5d6c0273750226b4408a8e4587e19
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/417345
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The function itself was removed, but the declaration in the header was
left behind.
Change-Id: Idbff42c197ef56e65fa92c6795306d9326381cf9
Fixes: ca1de9eb75 ("test: remove spdk_cunit library")
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/418231
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This brings the unit test line coverage from 94% to 97.2% for this file.
Change-Id: I257fdb0187f7cae256d6fccabbdaa6df9ce4e83b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/417369
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add a check to prevent spdk_mem_map_set_translation() or
spdk_mem_map_clear_translation() calls that start within the valid
address range but specify a size that would access parts of the mem map
outside of the valid region.
spdk_mem_map_translate() is safe without any extra checks since it only
accesses the first entry regardless of size, and the MASK_256TB check
catches out-of-range accesses to that entry.
Change-Id: Ie1437e57b5158363bb98a6b42a26fb41a089bbad
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/418106
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The arrays for both the map_256tb and map_1gb structures were twice
as large as necessary; fix the sizes and add unit tests for the boundary
conditions to verify that the fix works.
Change-Id: I66bce463f234f54e69cf2a697db9f806d398ca1e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/418105
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
These errors occur when scan-build is used with clang 6.0 as a backend.
Change-Id: I751a0fd3649ae500887a4dbda1d361104acb7c12
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/418233
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Just clarifying why and where some packages are used.
Change-Id: I36f17856a76ed1eb3d88054da2692beee9e569f2
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/418230
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Previously when IO was sent to bdev, even without callback yet,
status for task was set to SPDK_SCSI_STATUS_GOOD.
This patch changes it so that it is only set when callback actually
comesback from bdev via spdk_bdev_io_get_scsi_status().
Change-Id: I4a36ec345608257123e1036d31540f5f1090a23b
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/417708
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Residual count must be ignored and sense data must be set instead
when Check Condition occurs.
Add test code to keep current implementation.
Change-Id: I8919a28481c81606e8803269d5ff8a4e3fcbf8c2
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/418176
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Current SPDK implements SCSI Request Sense command so that a SCSI
Data-In PDU and a SCSI Response PDU are returned and underflow are
set to both of them.
On the other hand, some implementation return only a SCSI Data-In
PDU and some implementation return only a SCSI Response PDU.
Adding test code will be helpful for every implementation.
Change-Id: Icccc2d6e334146f558f8d75215bab1362b2b68f0
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/418175
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This bug was caused by the following two changes:
iscsi: Remove duplication of the variable for write completion to bdev
https://review.gerrithub.io/#/c/393582/
iscsi: restore data_transferred accumulation for read
https://review.gerrithub.io/#/c/393713/
For write, bytes_completed is always equal to data_transferred. However,
for read, bytes_completed is based on expected data transfer length and
data_transferred is actual read size. Hence bytes_completed cannot be
used to calculate residual counts.
One of the reason why this bug cannot be found was that there was not any
test case when task->scsi.data_transferred is 0 and task->scsi.length is
not 0. Hence UT code is also added.
Same bug will occur for read sense data. Hence UT code for read sense data
is added in the next patch.
Change-Id: Ib1a283b769e5af0c2d05acb69f90948c5d658087
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/417960
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
During spdk_bdev_init, examine_config is called.
This call can claim bdev synchronously, based on
configuration. On spdk_bdev_start if none module
claimed bdev, examine_disk is called and can
perform I/O before claiming bdev.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I1448dd368cf3a24a5daccab387d7af7c3d231127
Reviewed-on: https://review.gerrithub.io/413913
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Specifically, the errors that occur in scan-build that uses clang-6.0 as
a backend.
Change-Id: I3922a4f65134cbd866fcb27ad9b7a75b6b7803bb
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/418229
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
test/unit/unittest.sh would normally have to be invoked from the root of
the SPDK repository; tweak it slightly so that it can be executed from
any working directory (e.g. within test/unit).
Change-Id: I8fdbb7c0d618e2bb1490236212e54cbd43cccf6f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/418217
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
There was a plan a long time ago to try to output all
unit test results in JSON format for post-processing.
It is used by only one unit test file currently, but the
results aren't used and there are no plans to use it in
the future or extend it to other unit tests.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I72c409090bbd7b8fa7ec307bbc97f97ccf2e397c
Reviewed-on: https://review.gerrithub.io/418112
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Static analyzers don't see CU_ASSERT_FATAL as truly fatal,
and will complain that code later in the function may try
to dereference a NULL pointer. So we added SPDK_CU_ASSERT_FATAL
which should be used instead.
This still trips people up sometimes though - the static analyzer
complains and then the developer will add other checks that
pointers are not NULL.
So instead, forbid use of CU_ASSERT_FATAL through check_format.sh
and explain why. While here, fix up all of the existing CU_ASSERT_FATAL
usages to either CU_ASSERT or SPDK_CU_ASSERT_FATAL.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7974c8c85ddb89ed1b7d882db3a2eb0882ea0217
Reviewed-on: https://review.gerrithub.io/418111
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There's no reason to abort IO that have been queued
due to QoS limits, when QoS is switched from enabled
to disabled. Submit them to the bdev instead.
Fixes issue #357.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If5eafc53418ac686120e1d6a1da884b42cef845e
Reviewed-on: https://review.gerrithub.io/418128
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I396d5a7c3d2d736b5763d4c79284ed7483e2dce1
Reviewed-on: https://review.gerrithub.io/417704
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
They were initially developed to bump code coverage,
but now with upcoming vhost changes they are too much
of a wart to keep updating. They heavily rely on vhost
internals and are not particularly useful for testing.
Right now these tests allocate a vhost target struct,
hack its internals and try to call *_unregister() on it,
hoping to trigger some expected error.
One way to properly test the Vhost library would be to
mock rte_vhost_* functions and use the spdk/vhost.h API
to manage targets/devices. However, this is a greater
refactor and would more likely fit in a multi-threaded
unit test environment.
Change-Id: Ia6cb0e1f7d0d57aef35050427396f895fb3bd7e1
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/407390
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Originally task was memset to 0, meaning that some asserts might have
incorrectly asserted values that were set to 0 beforehand.
Now ut_init_task() sets task to 0xFF, with only couple required fields set to
appropriate values.
Change-Id: I47fbb03daf6ab7cbf60abc58f63315a151e49890
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/417686
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Callbacks were never called in UT for scsi_bdev.
Change-Id: I54a9d75af3161cd4dd4f0c153c7808b13e818576
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/417551
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
To make it clear that spdk_put_task() and spdk_init_task()
are not part of public API, chaged prefix to ut_.
Change-Id: I76a6efc3835f0ee71953029cad1dabf5a68013a4
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/417685
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch adds more intensive unit tests for reading and
writing splitted operations.
Change-Id: I64921fa31689e660281674e8b2ad4253faa7cf04
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/410031
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since delete_bdev should be used only for debug purpose,
this patch adds delete call specific for passthru bdev.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I8ea20b3003dd6539d84123c3b5363bd8bdfd6f7f
Reviewed-on: https://review.gerrithub.io/416535
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since delete_bdev should be used only for debug purpose,
this patch adds delete call specific for pmem bdev.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ic526e9ae462f595c4668c2b2612ad074208a7c4e
Reviewed-on: https://review.gerrithub.io/416520
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since delete_bdev should be used only for debug purpose,
this patch adds delete call specific for rbd bdev.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ia87459e0cc49a0c408de582bd1f5680c570d42d9
Reviewed-on: https://review.gerrithub.io/416529
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since delete_bdev should be used only for debug purpose,
this patch adds delete call specific for null bdev.
Changes in spdkcli done accordingly.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I576322257e5cf70ec03d6b20f8ba43bfce222907
Reviewed-on: https://review.gerrithub.io/416505
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
By the following change, delete bdev operation will wait until all
related iSCSI connections exit.
scsi: Don't free IO channel at LUN removal not by allocator
Hence delete bdev must be called after iscsicleanup in test code.
The following patch tried to do that. However nightly test code was
missed to change.
test/iscsi: Change the order of delete_bdev that hides uncorrect
hotplug implementation.
This patch fixes the failure of nightly test. By this patch passing
iSCSI nightly test was verified.
Change-Id: Ia3ac234db6d569212de9234b7201b132236b5993
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/417376
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
- To override the default /home/sys_sgsw dependency
add DEPENDENCY_DIR to ~/autorun-spdk.conf
E.g.: DEPENDENCY_DIR=/home/vagrant
- To override the default HUGEPAGES use
add HUGEMEM to ~/autorun-spdk.conf
E.g.: HUGEMEM=1024
Change-Id: Ib8db9d7d053ae319fe4c725159742875468d47f0
Signed-off-by: John Meneghini <johnm@netapp.com>
Signed-off-by: Ed Rodriguez <ed.rodriguez@netapp.com>
Reviewed-on: https://review.gerrithub.io/415907
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is an spdk_memzone_reserve variant with additional
alignment parameter. Now that memzones must be used for
physically contiguous memory, it will become extremely useful.
Change-Id: Ie48d682217e0e2f5c859a1603bb8a81fd2a7d7df
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/416978
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is the more appropriate location for this test
Change-Id: If556b365975f5658a55924aeb7122186961972bd
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/417365
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This exposes that one of the tests was not expecting
the correct behavior, so also fix that.
Change-Id: Idb73b3ea74950b2e6f959a40e5740375cb76b8c7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/417364
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
spdk_bdev_read() bdev function is not used
in scsi library. No need to stub it.
Change-Id: I7c142c59c5e64ae9ecfabaf0c73a9b0e68fffd04
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/417550
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
- load spdk_tgt with bdevs
- check if json config is properly saved and loaded
- check if all bdevs are properly loaded
- check if configuration of spdk_tgt is properly set
Change-Id: I89226bc9c05880e73523fb189116e7433a513244
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/406326
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Save the original size of the disk to metadata when it is first created.
On load verify that the disk did not change size.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I535940ee188425ee3b394effd99653cc073d541e
Reviewed-on: https://review.gerrithub.io/410896
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The name of the rpm source for open-iscsi changes between fedora
releases. Also, there was a typo on the tsocks check.
Change-Id: I0f9810c51c35c3efd5616fad303d08b02d9e2218
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/416882
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ia3122d7680e34b2270218a96770b2a2662b732ad
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/416526
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add option in test/vhost/common.sh to run FIO
with --output-format=json
Change-Id: I3115cf35d48a15a539d91e21f8f128970f150467
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/416525
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I1d24e842e3ebfff84bda10dfd9c05d3b7d94a967
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/416276
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
I missed this one in the initial series.
Change-Id: Id4dc7574a04cd964455852f1a00084b65ab989b3
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/416253
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch adds support for following Open-Channel vector commands:
* Vector Chunk Reset
* Vector Chunk Write
* Vector Chunk Read
* Vector Chunk Copy
Implementation is consistent with Open-Channel specification (rev. 2.0)
This patch provides unit tests for new public NVMe
Open-Channel namespace commands.
Change-Id: Ic71be9357c61c5de82ca672e82a71aa933bd1875
Signed-off-by: Jakub Radtke <jakub.radtke@intel.com>
Reviewed-on: https://review.gerrithub.io/414969
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Type of net framework is now passed throughout the iSCSI tests.
This is in preparation for running VPP tests alongside the ones
on posix.
Change-Id: Ifb25a9e4b04512de882883278b8bb465de579828
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/408879
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This was done only to help with determining cause of failure
in tests early on.
Both sides of veth interface are pinged.
While here, moved up the trap just in case any of interface
setup commands fail.
Change-Id: I9990b2320055ff74a6c542eb06b18c0106067728
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/416555
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
- install py27-pycodestyle on Freebsd
- conditionally use pycodestyle in check_format.sh
- fix various E722 do not use bare except errors caught by pycodestyle
- see: https://github.com/PyCQA/pycodestyle/issues/466
Change-Id: I64ecf3f204a456134d891d1339f3aa1db281965a
Signed-off-by: John Meneghini <johnm@netapp.com>
Signed-off-by: Ed Rodriguez <ed.rodriguez@netapp.com>
Reviewed-on: https://review.gerrithub.io/416460
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Users can set specified Admin commands or IO commands with
error status, when submitting new commands which are already
set with error status, the commands will return to the caller
with specified error code. So that users can emulate some error
status for their error condition code path.
Change-Id: I4b93c7e4f2b15a659da73b39e26bfa162eb5214e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/410870
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Since delete_bdev should be used only for debug purpose,
this patch adds delete call specific for error injection bdev.
Changes in tests and spdkcli done accordingly.
Change-Id: I7f0be09cfed582c4d1060871e40c41eff5af7129
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/415502
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will be necessary when the NVMe/TCP transport is added, which will
use the sock abstraction library.
Change-Id: I6561ccdad1ff575db2afa418eab2f2cd24806cb9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/416477
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This separates the network interface management code (interface.c and
net_rpc.c) from the socket abstraction layer, which allows users that
only want the socket abstraction to avoid pulling in the JSON RPC
libraries.
Change-Id: I9b00285a70bac0c74c73353cfa900d4f3b2e465f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/416475
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Since delete_bdev should be used only for debug purpose,
this patch adds delete call specific for malloc.
Changes in tests and spdkcli done accordingly.
Change-Id: I5296452f552ee6eaba4d012d47aea022f17b9d6e
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/415259
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This patch adds an API to decouple blobs parent removing dependency
on it. Blob stays thin after this operation.
Also unit tests for blobstore inflate are improved and reused with
decouple parent functionality.
Change-Id: I96dfee467c78cf4f4d929ec7bc05263f7a23a8aa
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/410829
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When snapshot is created from a clone, clones parent is not
inherited.
This patch also updates unit tests covering this case.
Change-Id: I42eb00fe2f33504c5b5c5beded20c4ea65eaff67
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/414804
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
ASAN has some memory address regions that it will not
allow applications to use for mappings (including mmap).
So when specifying --base-virtaddr to DPDK for
shared/mutli-process mappings, pick an address that
ASAN will allow the application to map.
Ref: https://github.com/google/sanitizers/wiki/AddressSanitizerAlgorithm
We will still disable ASLR while using the test stub for now.
Maybe we can eliminate this too in the future, but for now just
modify the autotest_common.sh comment since we've figured out
how to keep ASAN from messing with the mmap hint.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie24fd35bd22aa3ceab6271e8936775b157e5c330
Reviewed-on: https://review.gerrithub.io/416420
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Will change -t to -L
Change-Id: Ie04edf1fd3877b36fde1bae66a84de29f6617bbf
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/415947
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The FreeBSD contigmem driver has problems allocating
contiguous memory after a large number of unloads/reloads.
Since we run a very limited subset of SPDK tests on
FreeBSD, reduce the HUGEMEM allocation from 8GB to 2GB
to help alleviate the problem and reduce the frequency
of test failures due to contigmem panics.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I777153a6ad4f89311bb4e2f50bf69ee09e628eea
Reviewed-on: https://review.gerrithub.io/416214
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I3ec1603d1d73f67773fcb7f43d63b1db55d4d6af
Reviewed-on: https://review.gerrithub.io/416055
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Remove the list of qpairs per controller.
Change-Id: I6aaeed43c64b38b60c5a609123b3542bb7130a90
Reviewed-on: https://review.gerrithub.io/415317
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This will be re-added later in the series, implemented
in a different way.
Change-Id: I1f9df22025eb37f7f58ce1547862f61906ea557c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/415315
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is already required to build the shared library and iSCSI
components; simplify these Makefiles by adding -lcrypto to the central
SYS_LIBS in mk/spdk.common.mk.
Change-Id: I8fdaffbccc1294e24e32559387b0ed99d1deb0ce
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/415351
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Move the status field into the internal structure.
Change-Id: Icf96436925dd829ee89d2491ef55e337823be6fb
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/416057
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Id0408e571362527e7c2d4759223946a0b4d7c675
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/415896
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Purpose: Help for the debug.
To use the spdk_app_parse_args may be the next patch
(I just checked the spdk_app_parse_args, there are many
conflict args).
Change-Id: I6e601ba62cfdb4d381520b4eab0f6f85ed862bb9
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/415107
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function is intended to be used when an spdk_bdev
I/O operation (such as spdk_bdev_write or spdk_bdev_write_blocks)
fails due to spdk_bdev_io buffer exhaustion. The caller
can queue an spdk_bdev_io_wait structure on the calling thread
which will be invoked when an spdk_bdev_io buffer is available.
While here, turn off error messages in bdev.c related to
spdk_bdev_io pool exhaustion, since we now have an API designed
to gracefully recover from it.
Also modify bdevperf as an example of how to use this new API.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia55f6582dc5a8d6d8bcc74689fd846d742324510
Reviewed-on: https://review.gerrithub.io/415074
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
vm_setup.sh now calls pkgdep.sh to ensure that the basic packages needed
to compile SPDK are installed. Pkgdep remains a separate script because
it is supposed to contain the minimal set of packages for building SPDK.
while vm_setup is used to configure a complete testing environment.
Change-Id: I4038f522c66ad5b2c55ed73b1170f796b2c94e27
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/415895
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Ifac14f74f6b7681fccbf463f744d145ae8299240
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/415892
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Since delete_bdev should be used only for debug purpose,
this patch adds delete call specific for AIO.
Changes in tests and spdkcli done accordingly.
Change-Id: Ib732953a2c138dc25915ba97ce3a8acf771ad74f
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/415462
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change the checks to asserts instead. No callers ever
checked the return codes, and if they did, there's
nothing they can do to recover from an error status.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I96d6804d61dfbf6030b3cc78ea59981301417421
Reviewed-on: https://review.gerrithub.io/415539
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The bdev iscsi initiator had a bug which resulted in
an io_device getting unregistered twice. An error message
got printed but it didn't immediately result in any kind
of failure detected by any tests. Really this should be
considered a fatal error, so add an assert() so it's found
more readily should these kinds of bugs occur again in the
future.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I30df86ba2e6a3559e00f054c7dde14713d6ac80f
Reviewed-on: https://review.gerrithub.io/415375
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This will be needed when we need to re-attempt an IO submission
when the bdev_io pool is exhausted.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0500ee1b7881c1be7ba8a72a930190d85e7a0f77
Reviewed-on: https://review.gerrithub.io/415301
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This prepares for upcoming patches which handle -ENOMEM
from the SPDK bdev io submit function. When we retry
submitting the I/O, we do not want to "re-prepare" the
I/O - i.e. we don't want to calculate a new offset or
memset the buffer again for verify workloads.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0265651cb1fad372bf3e801c262dc159058a2a1d
Reviewed-on: https://review.gerrithub.io/415300
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia32bd2655a4cc1c082ce5fd5420f6abaabe40133
Reviewed-on: https://review.gerrithub.io/415299
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I0c6c410d120bec830ec17105de43ca62bf202b7b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/415313
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Previously spdk_thread_send_msg was being defined in the
test, but util is also linked in. Instead, use the real
io_channel abstraction in the tests.
Change-Id: I5c9ce1d0675c43e3ea5b4c88d2dd8282a86a0545
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/414074
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
A nasm or yasm compatible assembler will be required to build the
intel-ipsec-mb library needed for the DPDK crypto framework.
Change-Id: I3e1822069452208aa796caf84ddd9995fcac2cd6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/415065
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This was partially fixed in commit 1e481d0438 ("nvmf: Do not allow NN
to change while connections present"), but we did not handle the case
where the user asked to add a NS with a NSID outside the current NN.
This patch reworks the logic (again) to be more straightforward and
hopefully more obviously correct.
Some confusion between max_allowed_nsid and max_nsid is also clarified;
if max_allowed_nsid is set, then max_nsid == max_allowed_nsid at all
times, so we don't need the extra logic when calculating NN in
spdk_nvmf_ctrlr_identify_ctrlr().
Change-Id: If531baf1114e03441ff3e1e1be098071702d9056
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/414894
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will return the number of currently allocated threads.
Modify the bdev_io caching code to use this new API since these
caches are really per-thread, not per-core. SPDK does not support
dynamic threading yet, but once it does, we will want callers to be
using functions from the thread API - not counting the number of cores
allocated to the application.
spdk_env_get_core_count may still be useful as a helper function, so
it is still kept and not deprecated. For example, app.c uses it to
print the number of cores allocated to the application. bdevperf should
eventually be modified to use spdk_thread_get_count, but holding off on
that for now until spdk_event_allocate() uses threads instead of a reactor
lcore to specify where the event should be executed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5a30e3e825e6821da87d3927a2443768dfd740f4
Reviewed-on: https://review.gerrithub.io/414709
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Madhu Pai <mpai@netapp.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Several apps link against $(COPY_MODULES_LINKER_ARGS) without adding
$(COPY_MODULES_FILES) to the dependency list. This means that those
apps would not get rebuilt if the copy modules were modified without a
'make clean'.
The blobfs example apps were also missing other dependencies; add those
while we're here.
Change-Id: Iac6606b650d32bf21f7f31bd2727f9e92c0da748
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/414888
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Some features are per namespace and require a namespace ID; the existing
get/set feature functions do not allow passing NSID, so add new API
functions that do:
* spdk_nvme_ctrlr_cmd_get_feature_ns
* spdk_nvme_ctrlr_cmd_set_feature_ns
Change-Id: Ia7dc96e57badf1a56489785fb288493592b58b80
Signed-off-by: Jakub Radtke <jakub.radtke@intel.com>
Reviewed-on: https://review.gerrithub.io/414706
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch adds to nvme driver new public API dedicated for
Open-Channel:
* spdk_nvme_ocssd_ctrlr_cmd_geometry
Change-Id: I69592618d9bcc280346258e771195683d5b33893
Signed-off-by: Jakub Radtke <jakub.radtke@intel.com>
Reviewed-on: https://review.gerrithub.io/412816
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch changes the default setting of IOAT copy engine from
Enabled to Disabled. Accordingly this patch changes the config file
specification for IOAT copy engine from "Disable Yes/No" to
"Enable No/Yes".
Subsequent patches will add a new JSON RPC to configure IOAT
copy engine dynamically.
Change-Id: I754990cbb6ecc096953dd2fb9d34366b91111bf8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/410757
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is to add the core control policy for the
bandwidth rate limit (max bytes per second). Change
the existing functions for a common name and specially
handle the case when IOPS and bandwidth rate limiting
are both enabled.
Change-Id: I9f4565958d472559ef6d8bea52b1fe2a5f3c8969
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/413821
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To support the bandwidth rate limiting besides the IOPS rate
limiting, this patch is to add the support of the configuration
parse. The format will be as following to have a 10 (10M)
on the Malloc0 bdev. The default unit is in MB.
Limit_BWPS Malloc0 10
Change-Id: I62d70391ccad7804e6673ec56a3ed1cb0a4fbbd4
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/413652
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We especially want to do this when a test fails, but
running it in passing cases too ensures spdk_bs_dump at
least gets run on every patch through the test pool.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2d696dbf21d14681a73cb990933cba4e57a5f8a5
Reviewed-on: https://review.gerrithub.io/414482
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I6babd4cf990bf19b510db88bdfb0ca81e29d9252
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/414700
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Madhu Pai <mpai@netapp.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This makes more sense as a first class library.
Change-Id: Ibd5c578f8708bd8c7d83fe1629e97c9a3316b56b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/414698
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Madhu Pai <mpai@netapp.com>
A couple of files were accidentally marked as executable.
Change-Id: I89ff0bc037fba1b5d073ceea55c78fb5d9cb19b2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/414675
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
fiotest/autotest.sh is a I/O integrity test, so negative cases
should belond to a separate script file
Change-Id: Ie0728ce1eadba9687d1f40b3fdfb26c50ab34055
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/413643
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Factor qpair destruction function so that we can put common
resource release together in future.
Change-Id: I44139947820c2a384b745ae2673799f1b736369c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/412604
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
While here, don't print out empty performance data if the
test run failed (for example, if no bdevs were found). Also
remove superfluous "done" message at the end of main - it
really serves no purpose and looks silly especially if the
test failed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I19c678bee9079f6aa453a4b925819a5ea27f6534
Reviewed-on: https://review.gerrithub.io/414064
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The qpair mask can be used instead.
Change-Id: I9063e656c7c44663dc96adfd5ef52a5a1065d2ba
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/413860
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Instead of scanning a list of all qpairs, use a bit
mask to determine if the requested QID is unique.
This is not for performance reasons, but because
eventually the ctrlr's list of qpairs is going to
need to go away.
Change-Id: Ic25ee60e4f9cd9d596815719760d5be892f29d0c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/413286
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This will be used in other transports as well.
Change-Id: I05026b0dfea2647d61a173379aca368ca48a2f52
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/413864
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I6182eb3a77d23db7088703492d71349e3a4b6460
Reviewed-on: https://review.gerrithub.io/399366
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This test is now working reliably after commit 392f3ef589 ("test/nvmf:
fix waitforblk usage in multiconnection").
Change-Id: I15c790b01df8c8204b6c389cf8d381e10ee54fc9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/413857
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Vhost-blk readonly "config-ro" option was
removed from Qemu arguments after merging
pull request f67c9b693a into Qemu master.
"config-ro" Qemu option needs to be removed
from scripts in order for tests to pass.
Nightly test for read-only feature has to be
commented out until Qemu is updated on test
servers.
Change-Id: I0cdc9c2fd3b23ef77a63b54e280e1bb9500229ee
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/413745
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This one is actually a bit tough to deduce in the specification.
The NVMe-oF spec says that QID errors detected in the RDMA
transport shall return an RDMA-specific error indicating
the problem. However, our code doesn't detect the error in
RDMA-specific code, and it isn't clear if the language is
a "must" or a "should".
The NVMe specification does clearly indicate what error
to return on invalid QID in response to a Create
I/O Queue Pair command. For now, return that while
we game plan whether we need to call into the RDMA
transport to correctly report this error.
Change-Id: I7faf37bad9b9202bc50a906214a51c17e4808fc0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/413858
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch does a little cleanup of SPDK SCSI layer APIs.
spdk_scsi_task_alloc_data() is only used in spdk_scsi_task_scatter_data().
spck_scsi_task_free_data() is only used in spdk_scsi_task_put().
The latter was called in UT code but this can be removed without any
degradation.
SPDK SCSI layer is relatively matured and these will not be used
out of lib/scsi/task.c.
Additionally memory leak detected by ASAN is fixed in this patch.
Change-Id: I8eff7b4dbfc307c211087734649a9b9b10555f8d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/413872
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
int16_t is not used in SPDK yet. Hence add decode function only
for uint16_t.
Change-Id: I86f86a6768d95896d1840370f2d176c770c41418
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/413711
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Adds option to disable pci access in spdk_vhost_run function.
This is particularly required in vhost live migration tc2 & tc3
Change-Id: I5ec215d316b97dbabd1297856d8f2dfbf7b9d3cb
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/413658
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I862a7eb89d6357c85285d2a6cd90ad9f633d2435
Reviewed-on: https://review.gerrithub.io/413285
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This reduces submission+completion time by 10-15
core clocks per IO on an Intel Xeon Platinum
processor. Similar improvements should be seen
on other processors as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3241ba53ef5f21a8eef930b523a951525922e6b8
Reviewed-on: https://review.gerrithub.io/413284
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The subsystems created in this test only have one namespace, not 10;
wait for just nvme0n1, nvme1n1, etc. instead of trying to wait for
nvme0n1, nvme0n2, nvme0n3..., which will time out and fail.
Change-Id: I2d131e9b92c9c89a5dc8fe0cf9138b980f810233
Signed-off-by: xuhuagen <huagenx.xu@intel.com>
Reviewed-on: https://review.gerrithub.io/413056
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Rather than storing nvme_payload::type explicitly, use the SGL reset
function pointer as an indicator: if reset_sgl_fn is non-NULL, then the
payload is an SGL type; otherwise it is a contiguous buffer type.
This eliminates the one-byte type member from struct nvme_payload,
making it an even 32 bytes instead of 33, allowing the removal of the
awkward packing inside struct nvme_request.
Change-Id: If2a32437a23fe14eb5287e096ac060067296f1dd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/413175
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The definitions of these macros will change in an upcoming patch that
modifies the way nvme_payload is laid out.
Change-Id: Ic6edc18928542b07be7519a72bdbf6babbeb0131
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/413174
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will simplify upcoming patches that change the way nvme_payload
stores its type.
Change-Id: Idf0a5b8dfd7d66a10f89254d2c5c54fee2968a43
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/413173
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The check_io function always calls spdk_get_ticks() -
so return that value to the work_fn for checking
when the test is complete, rather than have work_fn
call spdk_get_ticks() again. This eliminates an
extra rdtsc call that counts against the completion
path.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5a4f52eb2bec70a119c9ea7368bc7f2e8f17155c
Reviewed-on: https://review.gerrithub.io/413152
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is an existing unmap "workload" but it is not a
real workload - it's just used as a type of verify
function to check if an unmapped region later returns
zeroes. This has typically been true for Intel NVMe SSDs
but is not universal, so this functionality is not really
useful. It's not used anywhere in any of the tests in the
SPDK tree either.
So replace it with a real "unmap" workload that will
do sequential unmap operations on the underlying
bdev. A future enhancement could make these unmap
operations random across the bdev - but that can be
added later.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I99d7c2d455fb5c3c87712a5bbfd890d257630f88
Reviewed-on: https://review.gerrithub.io/413151
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The Intel SDM clearly states that only an lfence (not
an mfence) is needed to ensure rdtsc is executed before
subsequent instructions. So change spdk_mb calls
to spdk_rmb to avoid overhead related to the unneeded
part of the fencing operation. This provides a more
accurate view of the overhead of both the SPDK and
kernel NVMe drivers.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idaeb59db241cc1630e438e300559a02c4d59cd49
Reviewed-on: https://review.gerrithub.io/413148
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
A recently-added test now uses a controller option value that was
previously uninitialized. Set them to all zeroes to avoid a Valgrind
warning about using uninitialized data.
Change-Id: I4454b781b7aec27e6d4f4dd8ff5cb059270551e9
Fixes: fbf06aca1a ("nvme: fail when request is too long")
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/413017
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
to clear nvmf subsystem.
Change-Id: I0bc33a3edf62b8248b9b6b33fa33be59ea400868
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/412941
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fail when number of child requests is >= NVME_MAX_CHILD_REQUESTS.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I8c370053847c9f623b861137da8d2387a66fc030
Reviewed-on: https://review.gerrithub.io/408850
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The NVMe spec says that Identify Namespace should return a zero filled
data structure for namespaces that aren't active, rather than failing
the command with a status code of Invalid Namespace or Format.
Change-Id: Ia9156477d8701694f8b295a67e1669fd09e2cb62
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/412872
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Use RPC instead
Change-Id: Iaab3d989b7efa687dd8aa1f9fea3ba720499b658
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/411463
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Json configuration can be loaded by adding parameter --json-path=PATH.
Also spdk_vhost_run can be launched without initial config file.
New JSON RPC call "load_subsystem_config" for loading subsystem
config.
Change-Id: I4e71da99ea574484cba7e0d29b87cbc0b41e5ce6
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/411460
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The patch disables writing dirty bit during blobstore loading.
Instead, dirty bit is written prior to the first metadata update.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I7be81009a99f09048bf23749c8f6ef5e9f7b3751
Reviewed-on: https://review.gerrithub.io/410884
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
This brings DPDK 18.05 support and introduces
dynamic hugepage memory allocation.
The following is now possible:
./spdk_tgt -s 32
rpc.py construct_malloc_bdev 128 512
or even:
./spdk_tgt -s 0
Note that if no -s param is given, DPDK will still
allocate all available hugepage memory.
This has been tested with DPDK 18.05-rc6.
Fixes#281
Change-Id: Ic9521484c2871eb5b2a56445f1177f305b147707
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/410540
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This test has been causing intermittent failures for some time:
nvme_rdma.c: 221:nvme_rdma_get_event: *ERROR*: Expected
RDMA_CM_EVENT_ESTABLISHED but received RDMA_CM_EVENT_UNREACHABLE (7)
from CM event channel (status = -110)
Disable it until we find a reliable way to avoid this issue.
Change-Id: Id8f767bfa26a6a14f94cf4f7ff69b3ac0f11d88d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/410489
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Factor out the common pattern of waiting for an internally-submitted
command to complete. This will give us a convenient central place to
add error checking.
Change-Id: I65334d654d294cfb208fc86d16fa387ac5432254
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/412545
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This will become the public interface for implementing
bdev modules. Right now the file exposes too much of
the guts of the bdev layer to modules, so it needs
to be stripped down.
Change-Id: Ie8b8c3271d51fdb8d0c24a80244b3f3e510c8790
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/412297
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The upstream project has been renamed to PMDK.
Change-Id: I9bb0200d2cbf1e94c464017587b7bf0847ac0bfa
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/412421
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fix in scripts that use BASE_DIR variable
that is redefined in common.sh.
Change-Id: Ie4ad9fb85f0042d274738f19b0d4696b2056efda
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/411833
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Abort is not currently implemented, since spdk_nvmf_qpair_get_request()
always returns NULL, but this will allow it to be implemented in a
thread-safe way.
Change-Id: I6dfd1ee50848deed0f4a2667aad5a811d8dd4ca7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/410723
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Icc8aeb642d31b5c031c90855b33913bf886cefe8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/412406
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When IO is finished SPDK will trigger callback at controller layer,
while here, wrapper the completion callback into a function so
that we can add error injection at this function in following patch.
Change-Id: I7b7a6d278d87fd09a05f51f688398fdf2e9c4e05
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/411630
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I26e9d1e86c93f0b96b5bff7c9af5a453199c3e29
Reviewed-on: https://review.gerrithub.io/408138
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ib999d3f082f5d632cb1aaf089504d0cd48e77539
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/408696
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Add a new function and its RPC caller. By using it, we can
get the statistics of all the bdevs or the specified bdev.
Meanwhile, with this patch, the open source tool 'sysstat/iostat'
can support for SPDK. The 'iostat' tool can call this function to
get the statistics of all the SPDK managed devices via the rpc
interface.
Change-Id: I135a7bbd49d923014bdf93720f78dd5a588d7afa
Signed-off-by: Yanbo Zhou <yanbo.zhou@intel.com>
Reviewed-on: https://review.gerrithub.io/393130
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This makes a number of things much simpler and eliminates
the need for upcoming proposed reset handling.
Change-Id: I23a6badd0873f6dcf38ba1e55bf18d846c2843df
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/407357
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This package has been renamed to reflect the new upstream project name.
Change-Id: I71f6bfaf36fb1fe7dc4cb050e3d7faad1097994e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/411781
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I923c808affabdb97a5237b76f9f5534d6fb41601
Signed-off-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-on: https://review.gerrithub.io/411048
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: I7598222db5d76c1a1578fbb5935d4348f7c62f54
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/410951
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is to support older versions of pmap (specifically procps v 3.2.8
which ships with centOS 6) which don't support the -p and -X options.
Change-Id: Ic8d4b94985c165e8bf224204af48b5d856aa2403
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/411755
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change print statement syntax and subprocess calls as well as some list
comprehension syntax.
Change-Id: Iebdea5f06be963e7f04af4df352aacef9b31a8eb
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/410957
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Add a simple example for spdk_vhost_nvme_controller_construct
and spdk_vhost_nvme_dev_construct functions.
Change-Id: I38415a7f4b28faf071a74e9b87d141da78e43368
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/410532
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Missed to add object_begin to dump for portal group.
key of lun in luns is different between dump and load.
Change-Id: I16b95596478e0e4430c7186aa077bd107e375a93
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/410863
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Python3 does not support the "except Exception, name:" syntax used in
test_cases.py
Change-Id: Ie90888d715c97c94c7686b797d955df2ead61915
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/410937
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It doesn't represent an io_channel, so lets
rename it to something less confusing.
Change-Id: I730eb0ff0eb7737a59c190812a25b327ccd8fc14
Suggested-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/409998
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Inflate call can be used on thin provisioned blob or clones.
Function allocates all unallocated clusters on specified blob and:
- For clones, copies data from backing blob.
- For thin provisioned blobs, clusters are zeroed.
After this call all dependency from specified blob is removed
what allows deletion i.e. snapshots.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Change-Id: Ibff569e45b12068b2fb46557156be348b36c252b
Reviewed-on: https://review.gerrithub.io/399367
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This commit adds a simple hello world example that writes the string
"Hello World!" to a bdev. The example can be used on a block device
such as Malloc or virtual bdev such as the passthru vbdev. The
sample bdev.conf configuration file includes a configuration for 2
malloc bdevs and one passthru bdev on top of Malloc0.
Change-Id: I1414183e3ddfac988ef61f24b8271653ac57e7c1
Signed-off-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-on: https://review.gerrithub.io/407220
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Support JSON config/info dump for portal group. These are added to
portal_grp.c. Text config dump is moved to portal_grp.c.
Add accesses to g_spdk_iscsi.pg_head are consolidated into
portal_grp.c to extract pg_head from g_spdk_iscsi.
Change-Id: I8c551b067c68a785eb0c7d83d695bde5f7219c2b
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/407850
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Support JSON config/info dump for initiator group. These are added
to init_grp.c. Text config dump is moved to init_grp.c too.
Add accesses to g_spdk_iscsi.ig_head are consolidated into
init_grp.c to extract ig_head from g_spdk_iscsi.
Change-Id: I88131d248ed13e42e4da56aed8ae0edc01a65715
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/407849
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The realloc breaks TAILQs inside the structures, which causes
subtle bugs. Instead, statically allocate all of the subsystem
arrays. This sets up the maximum number of subsystems to be
configurable, but does not actually expose it through the
config file yet.
Change-Id: I7347b6002b6babc0678ce59cd218a454fe3a6f88
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/410521
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Bdev layer has been recently refactored to share
internal module channels for *all* bdevs of the
same bdev module. This makes us return ENOMEM for I/O
of one bdev if another bdev of the same module (nvme, split, etc)
is entirely saturated. This is not the behavior we want,
as these bdevs may not have anything in common.
This `issue` has been fixed just now, but to prevent
it coming back again lets add a unit test for it.
This test case creates two bdevs using two separate
io_devices and checks if ENOMEM handling is somehow common
for these two. It must not be.
Change-Id: Ic32ef4b4347b8856d4b9f91107e6f188ad67978e
Suggested-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/409997
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
iSCSI hotremove is broken. It relies on C undefined
behavior. Some bdev_io may be put after their bdev_channel
has been put (freed) and spdk_bdev_put_io may be reading
freed bdev_channel memory.
iSCSI tasks targetting hotremoved devices are finished
immediately. That's usually fine, but these tasks might
be subtasks of an r2t chain. Once subtasks are freed, their
parent task may be eventually freed as well. If the parent
has finished before the hotremoval, its bdev_io has been
assigned, so freeing the task will put that bdev_io and that's
where undefined behavior hits.
There's an ongoing work towards deferring iSCSI hotremove
if r2t tasks are present, so this test should be reenabled
once that's done.
Change-Id: I7fa741b8749d542bcabb211a0969da5d7742eda3
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/410176
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The DEFINE_STUB macro doesn't actually need a trailing semicolon, but
adding one avoids a new astyle 3.1 bug that otherwise causes these stubs
to get reformatted incorrectly.
Change-Id: Idc281d08ba8e1ca0593442b6e4d25add25bea2d7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/410068
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id87ace1d8f875f294252874c644572b0993ffc94
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/410533
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Future changes will rely on the ability to atomically
swap this data structure out.
Change-Id: I77b93252df63155692271b5665cc040cb83a33d0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/409224
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There needed to ba a couple of changes made with respect to integer
rounding and handling raw binary strings from subprocess calls that were
handled by default in the last version.
Change-Id: Ie0e664a577e0b0fb690058842c5dbe95b2794a26
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/409776
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Thin provisioned blobs mark unallocated clusters with
cluster ID 0. During recovery from a dirty shutdown,
we must not try to claim cluster 0 - we should ignore
them instead.
Fixes issue #291.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If0dd42416f5de8d9972073bf6ed44eb8bc655415
Reviewed-on: https://review.gerrithub.io/410065
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: I02b857cdbeec936c7e4502fe3e72f9156b8abdd8
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/409799
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Support JSON config/info dump for target node. These are added
to tgt_node.c Text config dump is moved to tgt_node.c too.
All accesses to g_spdk_iscsi.target_head are consolidated into
tgt_node.c to extract target_head from g_spdk_iscsi.
Change-Id: Ibdf57c6ec9457d762c5640483b5810c9a74604ef
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/407848
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The contigmem driver is built with dpdk and frequently updated. We
should copy this driver each time we build dpdk in order to maintain
support for FreeBSD
kldload checks the sysctl variable kern.module_path when deciding which
modules to load. Since the values stored in this variable are not
determined by our program, I chose to copy the module to both common
directories for kernel modules in FreeBSD.
Change-Id: I2d439a9cbac5bebb79e6ee48bec47409bb215be9
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/409250
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This keeps original behavior, allowing scheduler to move
the thread if no core mask was specified - something the
in-tree test scripts do now. This original behavior made it
easier to just start bdev_svc as a dumb background process to
speed up nvme test programs running as secondary processes.
But if the user wants to specify a core mask to use bdev_svc
for other purposes, we shouldn't unaffinitize the thread.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I169a71d71c18ca7d6d1660e8401e84fc19a8cc9b
Reviewed-on: https://review.gerrithub.io/409774
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
These won't cover race conditions across threads, but
at least we have something to test the behavior.
Change-Id: I8e620d2076fe7a3d95df668fda4bee49b6d0afa7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/409343
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Nothing uses this anymore - the whole directory was renamed except for
this file.
Change-Id: If2568564371a21772d7daa24d09bea3eecb6564a
Fixes: 0488fd84b8 ("vhost_test: update vhost ext4test for spdk vhost")
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/409246
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will be used later instead of retrieving VS (potentially via a Get
property command for Fabrics) multiple times.
The Active NS List code was previously depending on the VER field of the
Identify Controller data, but this was only added with NVMe 1.2, so we
can't rely on it to detect NVMe 1.1 controllers; it is changed to use
the new cache VS value instead.
Change-Id: Iba9ed5ecbc82b4654973438d119daba0c4cf0724
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/408895
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This driver was added to allow benchmarking of the SPDK user-mode I/OAT
driver vs. the Linux kernel I/OAT driver; however, this isn't a
particularly interesting test, since the kernel I/OAT driver is totally
inaccessible from user-mode code (it is only exposed to the in-kernel
dmaengine framework).
Maintaining an out-of-tree kernel driver for the sole purpose of
benchmarking is out of scope for the SPDK project, so remove the kperf
driver and test harness.
This can always be retrieved from git history if needed later.
Change-Id: I0ced6e8a88de2cf09a6c0970dfef0ae8f357f193
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/408900
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Network namespaces are used to assure that kernel
is not routing packets within host stack,
but they go through veth interfaces.
This patch serves as a base for future VPP test changes,
where namespaces are used as well.
Change-Id: Ic7b82b0a0837bca2e16774fde244348a691fe056
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/405641
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
It has been removed long ago.
Also enabled "log" traces for log_ut, so that
SPDK_LOG_LOG messages are now displayed.
Fixes#284
Change-Id: I815f2a3301524540201adf060e3114143c258c4b
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/408945
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I182e3fd47c28468184d1a60dec3d114df2d5e5ae
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/408763
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is the first step toward fixing the behavior of the lvol bdev
module so that it handles spdk_bdev_unregister() correctly.
Currently, when an lvol bdev is unregistered, this causes the associated
lvol to be deleted; this isn't the desired behavior, since
spdk_bdev_unregister() is just meant to drop the currently-exposed bdev,
as in a hot-unplug event, not destroy the backing storage.
The current implementation of the new destroy_lvol_bdev method still
calls into the exsting (broken) spdk_bdev_unregister() path, but this at
least lets us fix the existing delete_bdev RPC callers that really
intended to destroy the lvol.
The next step is to make vbdev_lvol_destroy() call spdk_lvol_destroy()
instead of unregistering the bdev, which will require cleanup in the
generic lvol layer to remove the close_only flag.
Change-Id: Ic4cb51305d31f6d7366a82ba7bf7b19ebbcd3e9c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/408084
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The QEMU vhost-user-blk-pci host driver will not negotiate
VIRTIO_BLK_F_RO feature bit by default, users must append
`config-ro=true` to enable it if the backend device can
support read only feature.
Fix the issue #254.
Change-Id: I17dcc1b80bde094dd4873221b681d0c4049abb39
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/408266
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
DPDK will deprecate the old API soon.
Change-Id: I0522d47d9cc0b80fb0e2ceb9cc47c45ff51a5077
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/408722
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The QoS parameters are only used from the QoS thread,
so gather them together in a struct pointed to by the
bdev.
Change-Id: I91005f1d00205217a189d1ebacdb55782814f247
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/407356
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
rocksdb has been frequently failing in nightly tests:
https://ci.spdk.io/spdk/nightly_status.html
Change-Id: I53d812dfb6146bd973fff3c40fe3490c0fba9fc8
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/406975
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I07dac4bbf06a85659ae5d31e3f8d037d87825694
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/408483
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
--------------+------------------+-------------------------------------------
Name | Type | Description
--------------+------------------+-------------------------------------------
snapshot | boolean | true if lvol is a snapshot
clone | boolean | true if lvol is a clone
base_snapshot | string | name of base snapshot if lvol is a clone
clones | array of strings | array of clones names created from snapshot
--------------+------------------+--------------------------------------------
Change-Id: I5df06798f3bd34bba89743aba896d129a0915d00
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/404638
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3f9e54774951e691378e0659dcf15cecacd77e2c
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/405026
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This commit provides an API to obtain an information about
snapshot and clone relations.
The main objective is:
1) Determinate if we can delete snapshot (if have some created
clones),
2) Provide an information about parent/children nodes to the upper
layer (e.g. lvol)
Realization:
1) Structure parent-children is stored in the blob store object
and updated on:
a) blob store load,
b) blob create/delete,
2) Full information about parent-children is provided via new API:
spdk_blob_get_parent() and spdk_blob_get_children(),
Note:
While we don't store an information about these relations in the
blob store, we need to open all blobs on blob store load to create
it. It should be considered that it have an impact on the blobstore
loading performance.
Change-Id: Ie0237fa5b93af01aa73d1f68ac1694e653fb75e5
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/405025
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Recent patches to the vhost initiator tests have resulted in
some fairly regular test pool failures (at least 9 in the last
24 hours). Revert while this is debugged further.
This reverts commit 0b34e88c2d.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I427d46b10d30bf21b3b29bebc6583403e031f2fb
Reviewed-on: https://review.gerrithub.io/408389
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Recent patches to the vhost initiator tests have resulted in
some fairly regular test pool failures (at least 9 in the last
24 hours). Revert while this is debugged further.
This reverts commit 4988e48294.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I427d46b10d30bf21b3b29bebc6583403e031f2fc
Reviewed-on: https://review.gerrithub.io/408388
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is an internal NVMe driver function, so we don't need to allow for
the case where trid is NULL. All callers already passed an address of a
local variable except the unit tests, which can be trivially fixed.
Fixes a static analyzer warning about trid being dereferenced in
nvme_transport_ctrlr_construct() before being checked for NULL in the
caller.
Change-Id: I2bfeb5c92a302093b7c7f2949adcd18baa11855a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/408395
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Update the thread-local caches with new namespace data during each call
to spdk_nvmf_subsystem_remove_ns to handle the case where the user
requested to remove a namespace and then immediately add a different
one at the same namespace id. This makes the call asynchronous.
Change-Id: I8fd1968f7da78966386de18506b98d403b82d80e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/408220
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This test was disabled because older version of fio was crashing
during virtio-pci tests. This issue was fixed by copying fio
from host to guest vm.
Change-Id: I2e60d275372f0ed3baf3da7e3a5c87c7f2e771a6
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/406950
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_io_device_register() doesn't have a return value, but we can at
least catch trivial mistakes like neglecting to pass a valid io_device
or create/delete callback in debug builds.
One invalid unit test case that passed NULL for all parameters is
removed, since there's no way to make that work without adding a return
value instead of asserts.
Change-Id: I3dd4c850bdb14957d2dc03209ea9ea44bbe4e616
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/408117
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When testing whether QoS is enabled, the code previously
checked mutable values in the bdev itself. Instead, it needs
to check the flag in the channel.
Right now, QoS can only be configured statically when the
bdev is created. This means that no channels will exist
prior to QoS being turned on, which simplifies setting
the per-channel flag (only need to set it when a channel
is created).
Change-Id: I59e56c64c18c262cc2a7f71a6dde8329edb35db7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/407354
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This will allow a bit of internal refactoring to occur
without breaking the unit test.
Change-Id: Id7da6b14e9cd4cab5fc4dc004b5858dbbb34bc3a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/407366
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
This reverts commit 498f9add11.
Making the subsystem removal asynchronous seems to be triggering an
intermittent failure in the NVMe AER test. Let's revert this for now
until we can diagnose the issue.
Change-Id: Ie1d598f0d5cce07e6869d87cd8388848caa78e46
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/408118
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Performing a subsystem update on each poll group after the addition or
removal of a namespace allows us to avoid the case where we pause a
subsystem, perform a removal, then an addition, resume the subsystem and
don't update the channel for that subsystem. This, however requires that
spdk_nvmf_subsystem_remove_ns be asynchronous.
Change-Id: I856572c02e6267f708da3a956accbbedae7260fb
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/407012
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
To be run only manually as test pool does not
have DUTs connected in pairs.
Change-Id: If3ab3e671156b583adb35d5b23ee90003a6de732
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/400988
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Icb98e4628962591da32d169853d0ff14400e1e50
Signed-off-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-on: https://review.gerrithub.io/406922
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch fixes issue where user creates 2 lvols
with the same name simultaneously. New solution
builds list of names of lvols that are currently
being created and when new request comes it compares
name against existing lvols and lvols that are in the
process of creation.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I31b59ee13b5b9bae531866925dd409b143f08ad4
Reviewed-on: https://review.gerrithub.io/407408
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Ceph monitor IP address was always 127.0.0.1, with this change
it can be configured at setup time.
Since each test might prefer to specify different addresses
or ones that do not exist at start of autotest.sh. rbd_setup was
moved to begining of each test respectively.
Change-Id: I5626f7ea979d0db921208355ba23314cf48e971f
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/407910
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Multi-process tests should work fine using the DPDK
-base-virtaddr parameter. But we run tests with ASAN
enabled and ASAN instrumentation results in mmap
address hints getting ignored.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I089d31726c7b8f5ed0ccdc2deb19acc5431260f1
Reviewed-on: https://review.gerrithub.io/407843
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will be a debugging aid to root cause some intermittent
test failures seen due to ASLR in the test pool.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I23a856ab53bdf378b5da51f1cb8d9f2cdf6efce1
Reviewed-on: https://review.gerrithub.io/407842
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In Fedora 27 the nvme program returns before the kernel has loaded the
namespces associated with the subsystem. This patch ensures that those
namespaces can be enumerated by the kernel before we run any tests on
them.
Change-Id: I77505ed5cd5b1118a841650851fa5ecaf76f5619
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/407829
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add new optional bdev module interface function, init_complete, to notify bdev modules
when the bdev subsystem initialization is complete. Useful for virtual bdevs that require
notification that the set of initialization examine() calls is complete.
Change-Id: I0997fb5749d430f2fd3a40172ec8a1d5caa96964
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/407222
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
strncpy is going to be added to the list of banned functions because
it does not guarantee strings are null terminated.
Change-Id: I73adb5d3eea5c95ea705c67de4fc967e926eb6ce
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/407025
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Also move snapshot and clone test plan into implementation.
Change-Id: Ifa1f2da651305747ae24c50921deebd0266c5888
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/392371
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
strncpy is going to be added to the list of banned functions because
it does not guarantee strings are null terminated.
Change-Id: Iabd65cc703f56e8bc561344893aaeb6dc5f25fb8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/407022
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
iproute2 tools are more up to date and offer broader capabilites,
thus should be used whenever possible.
This change was prompted by "ifconfig -s" cutting interface names,
not allowing for ones that are longer than 8 letters.
Change-Id: I38462f8498207aa0b0d24d1c0b1769c1ba59f0ea
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/407395
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When combining two lists with of rmda_nics and all_nics,
last entry of rdma_nic and first from all_nics were
combined into one.
Change-Id: I809bdb6c8cc4dcc3aec2c0964598c35fccbba8ae
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/407394
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
rte_vhost_driver_start() can start a new posix thread
that polls for incoming socket connections and calls
backend->start/stop_device. Soon we're going to put
more work on this thread, so we need to make sure it
doesn't collide with SPDK reactors.
This patch also fixes vdev memory leaks in case the
rte_vhost_driver_start() fails.
Change-Id: I16fdff228176a245c478251b39aa244a49bd124b
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/406959
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I2cc6c494bacbeec1ba725b4b3d78a1f4a2ed39d1
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/406166
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The RocksDB plugin no longer strips the leading slash
from filenames - so update the fuse plugin accordingly.
If and when BlobFS supports a real directory structure,
we'll need to avoid the leading slashes, but for now let's
just make the fuse plugin usable.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5609dd4d5fd3db85f266963172f35ac004869d66
Reviewed-on: https://review.gerrithub.io/407231
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Enable test functions for lvol resize.
Change-Id: Ia4583af211350054797d2d8441083e582e6e2ab7
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Reviewed-on: https://review.gerrithub.io/395043
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change vbdev_lvol_resize() char name argument
to struct spdk_lvol lvol.
Add spdk_bdev_notify_blockcnt_change() after
succesfull spdk_lvol_resize().
Some code clean up and refactoring.
Change-Id: Idaa5bd4707e2479dfee50459a9844319b8c35d3a
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Reviewed-on: https://review.gerrithub.io/394521
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I28fa033378649f9cf02bf216698b9d2058f77c9d
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/406883
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I79dad84d1dc58e61eb36b461b41fbd7ee73631fc
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/406899
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Instead of silently truncating overly-long SCSI dev names, add an
explicit check and return an error if the name is too long.
Since we now calculate the length of name up front, this also allows
simplification of the copy into dev->name.
This also ensures that dev->name will always be zero-terminated, so we
can simplify the strnlen() in spdk_bdev_scsi_pad_scsi_name() to a
strlen() and remove the invalid unit test case for padding names longer
than SPDK_SCSI_DEV_MAX_NAME.
Change-Id: I54de00bac062a142a10c41cfa2aec19d7969dff0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/406990
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Change-Id: Ibc43e3ee65d85a83d78d6e15457ae57992a1188a
Reviewed-on: https://review.gerrithub.io/395059
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
At this time all iSCSI tests were using local address
127.0.0.1 for both sides of connection.
This patch changes iSCSI tests to use separate
veth (virtual ethernet) interfaces.
It will allow to actually verify functionality when using
different target and initiator IPs.
Veth are used as most closely resembling real enviroment
in single host and without any network hardware required.
This patch serves as a base for future VPP test changes,
where veth interfaces are used as well.
Note: Netmask changed to /30 temporarily and
verify_iscsi_connection_rpc_methods in rpc_config disabled.
Kernel will route trafic between two veth interfaces through
host stack. This causes target and initiator IPs
to be not as expected. Those are changed back in next patch
by adding namespaces.
Change-Id: Ida8fce107e8262bef94b2161e0197c45f6e3f070
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/405552
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will allow us to run vm setup multiple times on a vm without it
failing due to pre-existing directories.
Change-Id: Ied17dd40daaa4b5f9a1e2448940d413c7db7cc96
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/405508
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch adds compilation and installation of VPP.
Note that it removes one of VPP config files, that is
responsible for setting up hugepages. It is already done
with setup.sh script.
Parameters kernel.shmmax and vm.max_map_count were set
to low count and causing issues with hugepage total sizes
above 1GB.
Change-Id: Ic6c31f4192c654672e36c4131e34eb5b8aaac022
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/404144
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Refactoring the existing AER test code which add an option
to enable temperature tests of AER, this will enable coming
patch which add Namespace attribute notice tests support.
Change-Id: I514a1d6d0d3aacf4e207fb437406b5cf048f2a71
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/406026
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This addresses a large number of Klocwork issues.
Change-Id: I911960b12f8b62ebf54901c62f34f3b2064e5f61
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/406857
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
NVML (Non Volatile Memory Library) changed its name to
PMDK (Persistent Memory Development Kit), so make the
necessary changes to the SPDK repository.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id07a87eafb4e9a3099603030c58c0e927bafa608
Reviewed-on: https://review.gerrithub.io/406256
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
netstat is deprecated on CentOS/RHEL in favor of
iproute utilities. At least on one of the systems
in our test pool, netstat isn't installed - we could
install it but let's instead try to use ss if it's
available and still fall back to netstat when it's
not.
While here, remove waitforlisten_tcp instead of
changing it to use ss. We are not using waitforlisten_tcp
anywhere and do not recommend enabling RPC over TCP except
for test purposes.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4ee3597536797f501750915a4a219b55004bd454
Reviewed-on: https://review.gerrithub.io/406464
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Run identify against the subsystem we configured earlier, in addition to
the discovery subsystem. This mirrors the behaivor of
test/nvmf/host/identify.sh.
Change-Id: Ia96c46adb427239f0306d3b57588ee14742b968d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/406638
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This commit moves the name verification function out of the
spdk_lvol_create.
Also changes return value from -EINVAL to -EEXIST when name
already exists in lvol store, as more informative. It implies
that spdk_lvol_create also returns -EEXIST error code for
this case.
Change-Id: Ie0f642b316ba8c5cc42657334d35e539be56e830
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/406745
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Change-Id: Iad67be79d0ddd8c498950c4f7b1b3203e47a7a41
Reviewed-on: https://review.gerrithub.io/393936
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch adds new feature of blobstore.
New call creates a read-only snapshot of specified blob with provided options.
NOTE:
This patch doesn't cover recovery operation if snapshotting fails. This operation
will be implemented and added later.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Change-Id: I470ca13525638fa6df485d508b3adf71b6b69c0b
Reviewed-on: https://review.gerrithub.io/393935
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch changes hardcoded value for target IP to one from
common.sh.
Config file here should be replaced with RPC in the future.
Change-Id: I24ef413fcb9369a74b1db182338b5b41e0874a55
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/406364
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Make sure test case 10000 is always last, since it kills the target app
and makes any tests run after it fail.
This also de-duplicates the test execution code (now the "all" case
just fills out tc_list).
Change-Id: I88b629a1ef17afd4b95a4fd7d0cbf0321238b7a4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/406677
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
To support resize operations during I/O, we will need
to send messages to each thread to quiesce I/O while
the resize operation is in progress to guard against
the cluster map memory changing while another thread
is accessing the cluster map.
Therefore, spdk_blob_resize needs to be asynchronous.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ida037334739b4b80a1dbc76e8f1c70bca8b73582
Reviewed-on: https://review.gerrithub.io/404616
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Don't allow the user to specify an invalid ASCII string for the
controller serial number field.
Change-Id: I1c3acf6997a0afcdbfc03caf9e8d9b5fab429106
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/406441
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK_NOTICELOG should only be used for significant but non-warning/error
messages, such as notifications of deprecated config file sections.
Change-Id: I885dfe839c9cbc9eceabee234e4d0eb74c6910df
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/405923
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
This unit test operated under the assumption that one could immediately
free a bdev after calling spdk_bdev_unregister. This assumption is
broken when we moved the actual destroy call to an asynchronous callback
to spdk_io_device_unregister.
Change-Id: I92d34f7e2e2993bfe9391f9bb72e08128dec74f4
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/406429
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This thread is needed in any context when we send a message.
Change-Id: Ifcb5e3bf2e6ee60385b425a976ed380228570ae6
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/406427
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
No code change - the existing code is moved as-is.
This is the only place it is used, and it is conceptually part of the
virtual controller implementation.
Change-Id: I863f5931225c4d78e515341445e91b29a73da64d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/406251
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Several intermittent test failures have been seen with recent
changes to this test. Disabling it for now while the issue
is debugged further.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0634f182dab3d3d259690981474866a2037c7fce
Reviewed-on: https://review.gerrithub.io/406454
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
For application like vhost/iSCSI target/NVMe-oF target/etc,
a new section as below can be added for the QoS rate limiting.
[QoS]
Limit_IOPS Malloc0 100000
Limit_IOPS Nvme0n1 500000
Also added a sample change at test/lib/bdev/bdev.conf.in
Change-Id: I7c7d951fbe1352ca2571f135c657bc4fa43b56c7
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/393221
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
As there is no I/O channel associated with the QoS
bdev channel, add the specific functions to handle
the reset operation on the QoS bdev channel. The
reset operation will be conducted on the QoS thread.
Related UT code on QoS with reset operation was also
included.
Change-Id: Ibba68ddb132fa926fec6327829157b43ac806713
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/393181
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This enables virtio tests to run with 2MB hugepages
Change-Id: I0f9e2de0cb1f68fb967b929d8a27c6e410cb675a
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/404318
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add iscsi filesystem test cases(run fio) with
lvol and nvme backend in nightly.
Change-Id: I822e5c570fb9ef96ce63bf1c853c537b35c8b1d7
Signed-off-by: xuhuagen <huagenx.xu@intel.com>
Reviewed-on: https://review.gerrithub.io/405513
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Users can use RPC to add/remove a namespace to/from
existing NVMe controller, SPDK NVMeoF target will
generate an asynchronous event as an indication to
host when asynchronous event request is available.
While here, we also set the event with invalid log
identifier, so that the host doesn't need to clear
the event. Users can use Set Feature to disable
such event.
Change-Id: I93c4d752f552d3c86c53e80877aa61c093e167cc
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/398759
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Similar with exist vhost scsi/blk target, this commit introduces
a new target: vhost nvme I/O slave target, QEMU will present an
emulated NVMe controller to VM, the SPDK I/O slave target will
process the I/Os sent from Guest VM.
Users can follow the example configuation file to evaluate this
feature, refer to etc/spdk/vhost.conf.in [VhostNvme].
Change-Id: Ia2a8a3f719573f3268177234812bd28ed0082d5c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/384213
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This has been replaced with a pmem component-level test.
Change-Id: I3c433d9edbb4c4f0ff26d7716cd11ee9df5c0ad7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/405910
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
The long-term plan is to use the JSON-based configuration format, but
for now, we need a config file section to be able to test a bdev module
in blockdev.sh.
Change-Id: I2a69f7172693ed6d4939a3b938747e2a1c62ff83
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/405908
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In function verify_iscsi_connection_rpc_methods fixed
initiator address verification. It was used addres for target. From now
it is used separate addres for initiator.
Change-Id: I46ee7ab758b24342b6a25553a62a517914e9b70e
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Reviewed-on: https://review.gerrithub.io/405582
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Target IP for Calsoft tests was hardcoded in config file.
Now it will be based on iSCSI tests common configuration.
Change-Id: Ic8db40b02d2be59f5fac5cb4503cc0c80b24cd91
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/405865
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
- Add support for multi page CNS 0x2
- Use CNS value 0x02 (SPDK_NVME_IDENTIFY_ACTIVE_NS_LIST)
to query active namespaces
- Add an API to iterate the active list
Change-Id: Iea524881fa6e3610a7d85ab02a2005a92fd633df
Signed-off-by: John Meneghini <johnm@netapp.com>
Reviewed-on: https://review.gerrithub.io/401957
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
unlike previous implementations of ceph, luminous (which ships with
fedora 27) does not create a default pool for us. In case we are on a
system using luminous, we need to create that pool ourselves.
Change-Id: I183dc4fff6b92f7b270bd5a5d05947f0d99e9d04
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/405703
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
There are timeouts in NIGHTLY_TEST mainly caused by long duration
of spdk_vhost.sh --fs-integrity-blk test. It could be shorten by
reducing file size in fio test
Change-Id: Ic99f6f3ce52ed8bf1fafc75bb0f908d9df0d0d4e
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/405587
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This problem was discovered after an lpfc card was installed
in one of our CIT tetbeds. When an lpfc card is installed the
modprobe call in identify_kernel_nvmf.sh will load lpfc
as a side effect of loading nvmet. When this happens, you
can't unload nvmet until lpfc is unloaded.
Change-Id: I2cf63ea7d20b7dc15d73c7a8c8502fb05bef29f8
Signed-off-by: John Meneghini <johnm@netapp.com>
Reviewed-on: https://review.gerrithub.io/405518
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Test pool (and personal observatian VM launched by hand) show that VM
boot and shutdwon time can vary a lot. It would be good to make this
time more predictable but till then increase the shutdown timeout to 30s
in hope this will solve random shutdown timeout issue.
Change-Id: Icd23dc512aaf91bff47740308929ec4057c69469
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/405885
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPKD base bdev might be part of multiple vbdevs. The same is true in
reverse direction. So consider folowing scenario:
bdev3 bdev4 bdev5
| | |
+-+--+ + +--+--+
/ \ | / \
bdev0 bdev1 bdev2
In current implementation bdev0/1/2 will apear as base base for
bdev3/4/5 which is obviously wrong.
This patch try to address this issue.
Change-Id: Ic99c13c8656ceb597aba7e41ccb2fa8090b4f13b
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/405104
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Ia536d956c7393c244afc29d44196207ac73f48be
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/405545
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I58b53634fea07db219b20ee5b74cf31e708279a1
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/405548
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This moves all iSCSI configuration to common.sh that
should be sourced in each test file.
When particular tests requires different configuration,
it can overwrite those values.
(See ip_migration.sh)
Change-Id: Ia5f684142fb910184809ee7efe74b5a51063b374
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/405547
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This makes it clear and common among all iSCSI scripts
what ISCSI_PORT is refers to.
Change-Id: I01924179fb304b9cd111c39ff1b07aa3427d2c0c
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/405544
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously values for iSCSI configuration were hardcoded
within the rpc_config script. Now it takes arguments
from bash script above.
This is base for making iSCSI configuration
common among all test scripts.
Change-Id: I1fecdd87bc11fe053590a4e25c9020cb9085eb30
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/405543
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
add_initiator_group accepts netmask in IP/MASK format
and that should be sufficient for the current rpc_config tests.
This is base for future change to parametrize arguments
in this script.
Change-Id: I53346ec7af11c3266acc3d186a81b5948f7f2919
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/405542
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This file is accessed by files in multiple directories under test.
Change-Id: I634481fb58eab5c097aaece5289f88e531954fcb
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/404976
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Some error paths before _spdk_bs_alloc did not
destroy bs_dev.
After succesfull _spdk_bs_alloc, destroying is done
in _spdk_bs_free.
Change-Id: Ib69ae9707e12a646af80f7892af49cc4f79c199e
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/405223
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Blobstore supports only block lengths that are less than
SPDK_BS_PAGE_SIZE or when multiplication of block len
results in SPDK_BS_PAGE_SIZE.
This was checked only on spdk_bs_init(), but not spdk_bs_load().
When not checked, it caused issues with lvol store tasting.
During tasting, there is an attempt to perform spdk_bs_load()
on a given device.
It was possible to hit asserts in blobstore by creating
malloc with block size 8192.
Change-Id: I30b62bebad405b581eb2158925884adc616d9b92
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/404537
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Use nvme bdev with lvol to replace malloc bdev to test filesystem.
Change-Id: I74243675dd65d9f007a6eef1444b73f251afe95f
Signed-off-by: xuhuagen <huagenx.xu@intel.com>
Reviewed-on: https://review.gerrithub.io/403167
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function retrieves the UUID from a namespace, if available.
Change-Id: I98c55375948b92eaf429b41fb36dfea4e2b780a2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/404734
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Convert nvme_ctrlr_cmd_identify_controller() and
nvme_ctrlr_cmd_identify_namespace() into a single function,
nvme_ctrlr_cmd_identify(), with generic parameters that should be
suitable for all current callers as well as future users.
These functions were internal-only, so there is no public API change.
Change-Id: I3dbb3e6b00308b67ba1f161f8a6b11b6333fca57
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/404733
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
pep8 2.2.0 fixes E305 check, which currently causes
our check_format.sh to fail.
Checking Python style... Python formatting errors detected
test/lvol/lvol_test.py:12:1: E305 expected 2 blank lines after class or
function definition, found 1
test/vhost/common/run_fio.py:160:1: E305 expected 2 blank lines after
class or function definition, found 1
E305 differs from E302 as follows:
* E302 expected 2 blank lines, found 0
* E305 expected 2 blank lines after end of function or class
Change-Id: I2f6c3e1fa9fcb1b2c6d26690c1c65f39d7447875
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/405208
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0ad9b2cf286c92da9d0b2d5ff66def8dd6b71e7f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/404424
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This fixes some versions of lcov that treat relative paths incorrectly
when processing the -r option.
Change-Id: I15325abc79c39022380c9cc142a48afa0335012b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/404419
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
from hotplug/common.sh library
Change-Id: I21d74fcdd57fd2703d4457c528246ea4a7a4597d
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/402575
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Refactor filesystem test so that it does not use virsh, only qemu.
Source compliation on filesystem was replaced with FIO+verify
on file located on mounted filesystem.
Reason for this change is that test for single filesystem type
took about 1:30 for just compilation itself.
Considering that we have 4 filesystems in test with 2 different
vhost controllers, it took way too long.
Change spaces to tabs.
Change-Id: I396d653efe2bbf76934b2532576455be43632ff4
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/398603
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is not needed - we can easily get the number
of clusters from the underlying blob.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I94a716731bd1b8c4b333fe295bd5a963928b4330
Reviewed-on: https://review.gerrithub.io/404615
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Fix test timeout. QEMU pid is leaking from one test run into another
test run. This make test see random process with the same PID and skip
running VM.
Change-Id: I56940c55793535ab149c79775f5de284882ebd97
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/404476
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Write information needed to recreate each bdev.
Change-Id: I3d2b24fd4aaa8b98ec558d864cc28b55a899452f
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/401217
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add compiling SPDK with vtune test case.
Change-Id: I7ece8ef87e703eee5b1a8c326fd88224c9a02895
Signed-off-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-on: https://review.gerrithub.io/392424
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch leverages bdevperf, which configures
an iscsi initiator bdev to test iSCSI target.
Change-Id: I94c9299ef1f286a13678495d270326f4616c6241
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/404068
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This uses libiscsi to implement an iSCSI initiator bdev
module for SPDK. Still a lots of work to do on this - posting
it in case anyone is interested in working on this further.
A number of todo items are listed in a README in the lib/bdev/iscsi
directory.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Change-Id: I060e33de0cd6796246789bf0e1bb4f2df59d8f71
Reviewed-on: https://review.gerrithub.io/390313
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Introduce RUN_NIGHTLY_FAILING flag for nightly tests
that are always or periodically failing.
A new cron job will be added to run test with this flag.
RUN_NIGHTLY_FAILING is set for:
test/vhost/readonly/readonly.sh
test/nvmf/multiconnection/multiconnection.sh
a fio job in test/lib/bdev/blockdev.sh
Change-Id: I32640c0d4b916156c2ee996a9847c7c9e64941f8
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/403985
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Example showing the basics of a vbdev via a module that implements
the main functions, and a few extras, needed for a vbdev. The tests
also demonstrate how to configure an application to use a vbdev and
an underlying bdev
Change-Id: I67bf542143eb6532465cdb6af63c0f2ab7084c0e
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/399768
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A new optional parameter is added to the NVMe-oF target namespace
options to set the Namespace UUID, which will be reported via the
Identify command Namespace Identification Descriptor list.
Change-Id: I53c6d6fa6475d3395d412d196b42000715e9ed81
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/400894
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The unregister callback is only invoked after all I/O channels related
to the I/O device have been freed. The last I/O channel to be freed
might be on a thread different than the thread where spdk_io_device_unregister
was called. If this is the case, send an event to the latter thread
so that the callback gets called on the same thread as spdk_io_device_unregister.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3c910198fbd83eae95e5c57d618284e64db46ff7
Reviewed-on: https://review.gerrithub.io/404414
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Script will produce error when use "./test/lvol/lvol.sh all"
command. The range(1, test_counter() + 1) means run case 1,2,3...
but the case 2 doesn't exist.
Change-Id: I3e36b0e08dee1d2683da5a499a5db136d65d3022
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/404067
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A few places were accidentally storing namespace IDs in uint16_t.
Change-Id: Iae9d709fb20bc1ac0a584ccd9683b721ce5de961
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403886
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These should presumably be "uuid".
Change-Id: I90ebca1f6e29a12267a7de3591d92143ccca9074
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/404050
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia1310c136fbfef608590326edc9f7dae8f2e5fe9
Signed-off-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-on: https://review.gerrithub.io/403912
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id370631770cb2e090c3efbe95cd86db4f6168c5e
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/403702
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
ImmediateData in negotation parameters can be controlled by the config
file and currently "Yes" or "No" are valid values of it in the config
file. "Yes" or "No" means almost bool. Additionally, ImmediateData is
defined as boolean value in the iSCSI specification as follows.
However ImmediateData is an uint32_t variable and 0 or 1 are used in
SPDK now.
In the upcoming JSON config file, boolean value should be set to
ImmediateData.
Hence change all variables and constants related with ImmediateData
to boolean in this patch.
InitialR2T, DataPDUInOrder, and DataSequenceInOrder are not controllable
by the config file but these are defined as boolean value in the
iSCSI specification.
Hence change them to bool too.
Besides, AllowDuplicateIsid is used almost as boolean value. Hence
change it to bool too.
InitialR2T=<boolean-value>
ImmediateData=<boolean-value>
DataPDUInOrder=<boolean-value>
DataSequenceInOrder=<boolean-value>
Change-Id: I9f98b219687b3600194563b1d6b85551f4586144
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403237
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This enables more clear division of spdk_sock_* functions
and spdk_posix_* ones.
Change-Id: I329eaf99de9390c8473b57427966dfe6af777abb
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/403700
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This should be enforced by the main NVMe-oF target library, not in the
event subsystem code.
Change-Id: Ibce4fd78710b4a9da374e3d5979df4a16e91533c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403380
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
All files called directly by the unittest.sh script are now located in
the test/unit directory.
Change-Id: I95cfb3d5b7c6ede59d7183c39466f32b7e676643
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/401717
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We must hold bdev->mutex around all QoS channel manipulations, not just
channel_count; otherwise, there are race conditions.
Change-Id: I6183aef83f4d5789bded426a1832e3faaa688363
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403367
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I428d1be7db33efc1a44fa3f703ca154179fad2c0
Signed-off-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-on: https://review.gerrithub.io/403441
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This will be used to track time used in pollers - each poller can now
indicate if it found any work to do or not.
For cases where it was obvious and the infrastructure was already in
place, existing pollers have been modified to return 0 or a positive
value to indicate whether work was done. Other pollers have been
modified to return -1 by default, indicating that the poller isn't
indicating anything about whether work was performed. This will allow
us to find un-annotated pollers easily in the future and fix them
incrementally.
Change-Id: Ifebfa56604a38434fac5c76ba7263267574ff199
Signed-off-by: Roman Sudarikov <roman.sudarikov@intel.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/391042
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There are two separate function pointer types declared in io_channel.h:
spdk_thread_fn for cross-thread messages, and spdk_poller_fn for
pollers. They currently have the same signature, but this will be
changing in an upcoming patch, so we need to fix the poller-related
functions to use the correct type (a few were using spdk_thread_fn by
mistake).
Change-Id: I0f0d8f1eea9905395125fc91e0355a49e65be99e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403598
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This better matches the style in the rest of SPDK.
No functional change - this is a pure find/replace of
spdk_bdev_module_if to spdk_bdev_module. Instances of this struct will
be renamed in another patch.
Change-Id: I3f6933c8a366e625fc3a1b6401aee26ee03ba69c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403368
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will allow us to reduce core assignments for build pool vms to 8.
Change-Id: I405a12f2c1041f77f90add0b5d27abd75f7b948d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/403559
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
BlobFS shutdown path needs to be investigated more with these
changes.
This reverts commit a137b9afd0.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8b04b24e178945d62db20668b9e500f278ae955b
Reviewed-on: https://review.gerrithub.io/403600
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
For any given blob, if an spdk_blob_sync_md() operation
is already in progress, queue additional spdk_blob_sync_md()
operations until the previous one completes.
This ensures proper ordering of writing metadata to
disk.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2051e8cb5b8d1a033ec1238cb4811232110aa0f4
Reviewed-on: https://review.gerrithub.io/401257
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
- Cumulative Moving Average (CMA): average of all data up to current
- Exponential Moving Average (EMA): weighted mean of the previous n
data and more weight is given to recent
- Simple Moving Average (SMA): unweighted mean of the previous n data
Currently bdevperf support only CMA to know average of IOPS. However
CMA may not be appropriate to know the trend of IOPS. EMA or SMA will
be better to take the role.
The formula of EMA utilized in bdevperf is the following
Multiplier = (2 / (Time periods + 1))
EMA: EMA[n+1] = (IOPS - EMA[n]} x multiplier + EMA[n].
One of the source of the formula is https://github.com/patharanordev/ema
Change-Id: Ia7a282f6d173ace470e05b19ee6dee5edf640617
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/398886
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Portal, portal group, initiator group, and target node don't use fixed size
array anymore. To use the same naming rule in iSCSI subsystem and in SPDK
is helpful to understand and maintain. Current naming rule is not bad but
to use unified and compact name is prioritized at this time.
This patch changes function names as follows:
- spdk_iscsi_init_tgt_nodes() -> spdk_iscsi_parse_tgt_nodes()
- spdk_cf_add_iscsi_tgt_node() -> spdk_iscsi_parse_tgt_node()
- spdk_iscsi_portal_grp_array_create() -> spdk_iscsi_parse_portal_grps()
- spdk_iscsi_portal_grp_create_from_configfile() -> spdk_iscsi_parse_portal_grp()
- spdk_iscsi_portal_create_from_configline() -> spdk_iscsi_parse_portal()
- spdk_iscsi_portal_grp_array_destroy() -> spdk_iscsi_portal_grps_destroy()
- spdk_iscsi_init_grp_array_create() -> spdk_iscsi_parse_init_grps()
- spdk_iscsi_init_grp_create_from_configfile() -> spdk_iscsi_parse_init_grp()
- spdk_iscsi_init_grp_array_destroy() -> spdk_iscsi_init_grps_destroy()
For example "parse" is already used to explain the operation in portal_grp.c.
Hence using "parse" is familiar and not strange in iSCSI.
Change-Id: Ieff952069d39bd96b7afa1586bfff927968accc2
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403149
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch is to add the basic support of QoS on bdev.
Including two major functionalities:
1. The QoS rate limiting algorithm:
a. New IO will be always queued first also under
the no memory condition
b. Start the QoS IO operation based on the limit
c. A poller started in each millisecond to reset
the rate limit and send new IOs down
d. The rate limit is based on the millisecond and
converted from user configurable IOsPerSecond
2. The Master Thread management:
a. Add a per bdev channel_count
b. Whenever QoS is enabled on bdev, if QoS bdev
channel is not created, create the QoS bdev
channel and assign the QoS thread
c. When new IOs coming from different channels
(threads), pass the IOs to the QoS bdev channel
through the thread event
d. When the IOs are completed from the QoS bdev
channel, pass the IOs back to its orignal
channel(thread)
e. Destroy the QoS bdev channel when it is the
last bdev channel for this bdev. Defer the
destruction if current thread is not QoS thread
Change-Id: Ie4444551d7c3c7de52f6513c9db926628796adb4
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/393136
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently SPDK_BDEV_MODULE_REGISTER() take many parameters. Extending it
(eg for incoming JSON configuration dump/load) is quite challenging and
error prone. As we are already here in next patches, rework this macro
to take one parameter - the pointer to struct spdk_bdev_module_if.
This patch also remove following macros:
SPDK_GET_BDEV_MODULE - this is not really needed, to find module outside
module translation unit use spdk_bdev_module_list_find()
SPDK_BDEV_MODULE_ASYNC_INIT and SPDK_BDEV_MODULE_ASYNC_FINI - replaced
by bool fields in spdk_bdev_module_if struct.
Change-Id: Ief88e023fbbaee7d5402c838dbecbdffd4dfb259
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/402883
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Don't do anything under the scene as adding/removing fields in struct
spdk_subsystem will require both macro change and C file changes.
Change-Id: I11bc0d5758edd7e0e0bd3f93e251d868cd9b1d2b
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/401850
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Although migration successfully end Test Case 1 fail because
of some VM shutdown issue. This look like test issue.
Temporarily increase verbosity in vm_shutdown function to debug
this issue.
Change-Id: I3d54775b2e4e7286bd86359a7ac5ca2a9d8ad750
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/402531
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This test is incorrect - it sends immediate data
greater than negotiated FirstBurstLength, but
expects an R2T. This is illegal and SPDK is
rejecting the PDU correctly.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I52220e07fa32819ee7a4ba4e6e88a1a7328d207f
Reviewed-on: https://review.gerrithub.io/403213
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Change-Id: Ie7a940efde885dbf0bb7c085fd17c3991dfa3341
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/403165
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was introduced after the spdk/uuid.h wrapper was added due to a
non-rebased patch being merged.
Change-Id: I674db91581e6eb2e9ab6113e19d777404a78cf37
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403205
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Modifies behavior of spdk_app_start() and spdk_app_parse_args()
such that they return on failure instead of terminating with
exit().
Change-Id: I82566417f04e1ae2e3ca60a00c72e664db26c9e4
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/401243
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Fixes Github issue #236.
Reported-by: Meng Wang <wm8120@gmail.com>
Submitted-by: Meng Wang <wm8120@gmail.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If205dd8446c61d101a869899680d2552838b9de3
Reviewed-on: https://review.gerrithub.io/403123
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch adds possibility to set internal xattrs on blob
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I2d0f14558e4a1af7071ee1a4f59aaf9f14bea2d9
Reviewed-on: https://review.gerrithub.io/396418
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Unit tests implemented in following patches.
This is rebased patch from https://review.gerrithub.io/#/c/396648
merged as commit c1174e6895
and reverted in 0847f27b54.
Change-Id: I3d152bf7847c83bf75149edd61564c1f393927d8
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Reviewed-on: https://review.gerrithub.io/402529
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Along are some neccessary changes to rpc_commands_lib which
are needed to check lvol store names and lvol bdev aliases.
Also update test plan with test cases description.
Change-Id: Ifbe712a105610a78a2292a459aebee77e29903c5
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/397088
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ief1f809308fbde2e696c60d3ce79c0720cb3e2ff
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Reviewed-on: https://review.gerrithub.io/398934
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
vm_setup.sh previously reconfigured the global git settings for
whichever user it was run as; this isn't necessary, since we can just
set the user/email within the iscsiadm repository's .git/config where it
is needed for 'git am' to work.
Change-Id: I11cdd84b4ae807e018ee38ba2ac1caaa76ba5d3b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402887
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
No need to run the stub and other setup work if the nvme-cli repository
is not found on the test agent.
Change-Id: I5a3c0ab8ceb25e65f4693b8fc519812ebccf9ae7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402380
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This lets us have a common place to put definitions like the length of
the UUID string, as well as abstract away some of the API warts in
libuuid (non-const values, no size checking for uuid_unparse, etc.).
Change-Id: I80607fcd21ce57fdbb8729442fbb721bc71ccb98
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402176
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Rather than explicitly asking for time-based UUIDs, let libuuid choose
the best available UUID source (high-quality random number based if
available, or time-based if not).
Change-Id: Ic2f538890f86d3158b64f5884708439b72c373f6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402963
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Before this patch super_blob id for blobstore was persisted
only during spdk_bs_unload. If power fail occurred after creating and
syncing blob, super_blob id was lost within blobstore.
Lvol store metadata would be lost, if proper shutdown
didn't occur in first SPDK instance run since creation of lvs.
This fix changes setting super blob to be instantly persisted
on disk in super block. Without affecting clean bit in super block.
Change-Id: I578f1fc8717e2d7968ad506fa4dead7507a5e0b4
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/398804
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
set -x flag in pmem and readonly tests for easier debugging
Change-Id: I006d57bb770427a39b8788cfb1def44b75f47e47
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/403066
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Wildcard was missing from expression so VMs with
number greater than 9 were not discovered. This caused fails
during shutdown process as VMs were not killed.
Change-Id: I3efcfe50aa709f408a4d91b4317a85ffa2f4d84e
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/403039
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In some cases, if vhost crashes on startup, test would continue
normally instead of failing
Change-Id: If2f82b5e3dad07403051353d6fcf5e83d5d002c0
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/403064
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make it possible to tell what is going on in the test.
Change-Id: I8331f155367d7b14a788c91d3d2a34e1f82b3860
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402379
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Rather than building against some local version of SPDK from the
nvme-cli checkout, build against the SPDK version that autotest is
currently testing.
Change-Id: Ifbb1dde1ace9247929f499e31ab6401503ec18d2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402378
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Put it in the iscsi.c
Change-Id: Ifb2843fb7c78f9ca948eac60704547b8b0635bf0
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/402484
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Automatically detect more whitespace errors.
All existing cases are fixed; only whitespace change (verify with
diff -w) except for one comment style fixup in include/spdk/nvme.h.
Change-Id: If750e54b9c8e3421ea6feda5f20184a31431631e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402360
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: I06173fa95495ff347774cfecbb7728000e2ea39b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402377
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This change wasn't correctly rebased and needs to be updated to compile
against the current blobstore.
This reverts commit c1174e6895.
Change-Id: I529608bee7323cb626d8c36dff15adc9ba24ad26
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402352
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Unit tests implemented in following patches.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ib18c9060f527bd22bfdbed74e96871a6e0551ead
Reviewed-on: https://review.gerrithub.io/396648
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Cover spdk/nvme-cli main commands(Porting from DTS)
Change-Id: I3afa71c5180a0143bc6c55f70b18c45bc098ec6e
Signed-off-by: wenzhong wu <wenzhongx.wu@intel.com>
Reviewed-on: https://review.gerrithub.io/392607
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I1c5adcce861b8a1fc8f8c96a3a237c4c2dae61af
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/401559
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If19c263d184c1eaab12950ba0baa05e7f3aea6e0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/401729
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function consolidates cleanup behaviors that the pool should follow
in the event of a failure.
Change-Id: I8623f065146292b29a38eb199dcbeac5787723e7
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/401857
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The Ceph scripts can now be run from any directory; they don't depend on
their $PWD being the script location anymore.
Change-Id: Iff883a3e9b8ba2d0a6193e2f5c047eb9d7d423fd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/401657
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Use python decorators to replace the header
and footer functions.
It's more convenient for printing the message
When add new case only need to use the @case_message
before the def test_casex(self):
Don't need add the header() and footer() functions in test_casex()
function and don't need pass the number.
Change-Id: Ic8f1e2e9342d06409c088d6ef011a87c7ee98950
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/401289
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Purpose: This test will be helpful to find more
issues when running nvmf_tgt with multiple core
configuration.
Change-Id: I06b6bec7a258084a30677356cdf89eb7f61c4ed8
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/401543
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is the first step in reorganizing the spdk test heirarchy.
Change-Id: I83467653af2da2a53251649092bed6902d6cb86e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/401707
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
blobfs and lvol can now use this to automatically iterate
all existing blobs during spdk_bs_load. Changes to blobfs
and lvol will come in future patches.
This will also be used in some upcoming patches which need
to iterate through blobs during load to determine
snapshot/clone relationships.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic7c5fac4535ceaa926217a105dda532517e3e251
Reviewed-on: https://review.gerrithub.io/400177
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Currently, this just reports the EUI64 and NGUID types, which are
already available in the Identify Namespace data, but this sets up the
framework for reporting a Namespace UUID (which doesn't have a
corresponding field in Identify Namespace) in the future.
Change-Id: I758e6d402ff874d65eca3f1db98d92c1a3f7a11f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/400893
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch is used to implement the sock fd event group
polling mechanism if there are incoming data from network
(read event in SPDK iSCSI target side) , thus we can awake
many connections one time, and it can reduce the system call
overhead.
Change-Id: I76c26a89ef9365d7e1ccec616985e7435253896b
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/399796
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Ctrlrs list maintanined by the subsystem structure should be operated
by the thread which creates the subsystem. And this will make the
operations correct.
Change-Id: I7f881a77b1846658b3acd4270b74f86816e87803
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/401541
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Unit tests that use this will still immediately execute
the messages by default. But upcoming changes to
queue persists will need to leverage testing asynchronous
behavior so these changes enable that.
While here, fix some bugs where _bs_flush_scheduler()
did not fully flush the queue of scheduled ops.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I009e8277eef41d7e3677d9f135db34d8eaf2f071
Reviewed-on: https://review.gerrithub.io/401256
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Finish the sequence first, before calling _spdk_bs_free().
Otherwise synchronous bs_devs (like we use in the unit
tests) cause the sequence memory to get freed via
_spdk_bs_free() and then we try to finish the sequence.
This eliminates the need for g_scheduler_delay and
_bs_flush_scheduler() in the blob unit tests. But don't
remove them - they will be useful in upcoming unit tests
for queued persist operations.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I09aac3ae4d3a56ff8e04a5b822fcd6746f13afc3
Reviewed-on: https://review.gerrithub.io/401267
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
vhost nightly readonly issue
get_vhost_dir function in the common.sh script.
Change-Id: Ic2ceee4cf8d8486715b908791d79e421269742bf
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/401100
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic2bae1c750d2c9b35bded8ed96c3b84832690ce2
Reviewed-on: https://review.gerrithub.io/401479
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Three new RPC methods are added to allow modification of the NVMe-oF
subsystem allowed host whitelist at runtime:
- nvmf_subsystem_add_host
- nvmf_subsystem_remove_host
- nvmf_subsystem_allow_any_host
Change-Id: I5c98658f949dad013165c04497cca49867022ba0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/396063
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: I7a65a5818f2b851962c2be391efedfb9bfc8398c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373841
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
During converting type of CHAP params of target from int to bool
for JSON, changed names of them to be consistent with others.
In this patch, adjust variable name of struct to of JSON.
Change-Id: I1ccbfa11d57479dc55680835eb80e111bd24d9a3
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/400928
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is a TODO from long ago. Complete this while adjusting dump()
and construct() format of target.
Besides names of variables and parameters about CHAP are not unified
between JSON-RPC and SPDK internal. JSON-RPC's wording looks better
and adjust SPDK internal to JSON-RPC.
Change-Id: I89bcd1ce13a11f7d63a62d51ef094dd302186d37
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/400201
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is a TODO from long ago. Complete this while adjusting dump()
and construct() format of target.
Change-Id: I44348ec404cae8882086a1a71a65914c9bafccc3
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/400202
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These new names are much more clear and are aligned with other
functions such as spdk_blob_close.
Keep the old names around for now but deprecate them. We will
remove them in next release.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idc60fd0b19fa2a8b0247a1f5835774d342e721f9
Reviewed-on: https://review.gerrithub.io/400884
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is needed for an upcoming change which will
prevent metadata functions from being called on
threads other than the metadata thread. Without
this change, there was no way for this function
to return an error if it was called from the wrong
thread.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I67e591140194ff6ad250878168f6b166a1ff2282
Reviewed-on: https://review.gerrithub.io/400883
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
There was some thinking that we would need to allocate
I/O channels on a per-blob basis to handle dynamic
resizing during I/O. Making spdk_blob an opaque handle,
with the existing spdk_blob structure renamed to
spdk_blob_data was a first step towards making that
happen. But more recent work on blobstore has
simplified the resizing approach, so this spdk_blob_data
is no longer needed. So revert it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I22e07008faceb70649ee560176ebe5e014d5f1a3
Reviewed-on: https://review.gerrithub.io/400881
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This can be enabled with -t nvme in debug builds.
Change-Id: I4392d0a7decd65cc567fdf6fd56cac6db0424cd8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/401052
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Unify several similar functions checking for a buffer of all zero bytes
into the util library.
Change-Id: Idfbeffa22add34ac9ed1bd75ee27d6bd8b188940
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/400892
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reduce time by compressing files before copy and adding
more cores to the guest vm
Change-Id: If96709884654100590a9dad32e37c6929cab9832
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/400624
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
In early days of SPDK, there was an experimental userspace
TCP stack called libuns. The SPDK iSCSI target supported
using either the default POSIX/kernel TCP stack or this
libuns TCP stack.
libuns is no longer in use, but work has started on
supporting the FD.io VPP TCP userspace stack. Abstractions
are being put in place to allow *both* the POSIX and VPP
stacks simultaneously.
So remove the concept of a "default" net_framework that is
defined with weak symbols that can be overridden by another
object file. While here, also remove the "clear_socket_association"
concept which was specific to libuns.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8a0385ca5ae113e34a637f835d8d69f8d510433e
Reviewed-on: https://review.gerrithub.io/400328
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_vhost_dev_has_feature() is internal function so we can move it's
declaration to header file. This remove function call overhead.
Change-Id: I1704e8279cd6720177047a1ae8818f68982998db
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/400241
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
adding nvme_ctrlr_destruct_finish because nvme_transport_ctrlr_destruct may
use a destroyed mutex.
nvme_ctrlr_destruct() free "ctrlr_lock" and after that call
nvme_transport_ctrlr_destruct()->nvme_pcie_ctrlr_destruct()(with pci)->
nvme_ctrlr_proc_get_devhandle()->nvme_robust_mutex_lock(&ctrlr->ctrlr_lock);
Change-Id: I55714ea9097d2c9d844a00b5a88fa2d51a3f4469
Signed-off-by: Ehud Naim <ehudn@marvell.com>
Reviewed-on: https://review.gerrithub.io/399605
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add optional parameters to namespace creation to let the user pick the
namespace globally unique identifier and EUI-64.
Change-Id: Ia3eebaf22f8a64733a00a83f90cafb4977c2d07a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/399531
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ice343afdc84c2a11cd9026d128a35f7a62aa7125
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Reviewed-on: https://review.gerrithub.io/398933
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This will allow more parameters to be added to
spdk_nvmf_subsystem_add_ns() without breaking API/ABI compatibility
later.
Change-Id: I6b2f58f1a2d5fcd4c754830cbd4713dc461a31fc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/399519
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The subsystem->ns array may be resized with realloc(), so old ns
pointers can become invalid.
To fix this, allocate each ns as a separate object, and change the
subsystem->ns[] array to point to the namespaces rather than containing
them.
Change-Id: I873502fa90cf840e4eaa9b1abd94a95afe0f737f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/399726
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Set queue number to match fio threads (7 IO threads + spdk)
Previous number resulted from the wrong assumption that
the number of queues is the sum of threads on all devices
Change-Id: Idd51cf0f62c07fa3833e3e7172edb8425ca1e19b
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/399595
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch is used to solve
https://github.com/spdk/spdk/issues/235
With multiple core bining for NVMe-oF target,
the qpairs which belonging to the same ctrlr may
be scheduled to different cores. Thus there is
resource contention to access the struct spdk_nvmf_ctrlr.
And we put the thread info in polling group. Morever,
we introduce an admin_qpair in ctrlr. Since admin_qpair will
always be created at first and freed at last, to reference
this pointer is safe.
Change-Id: I12ac26f9e65b4ed8e48687750046455af0e3be1d
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/398904
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Adding new initiator to an existing initiator group to allow login
will be usual. This patch support the following JSON-RPC commands:
- add_initiators_to_initiator_group
- delete_initiators_from_initiator_group
Both initiator's name and netmask are optional but already added
name or netmask cannot be added.
Test code is added too.
Change-Id: Ic101210b9d00c2b36e37ece23fcba8cfe8e44eb8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/398361
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Bridges are not working with SoftRoCE.
Change-Id: I4c600efb3b7bf85386658fd050cd2755dfc542b4
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/400009
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
run_vhost.sh - gdb/gdbserver support removed long time ago but not
removed from help message.
migration.sh - remove "copy-paste" help message garbage.
Change-Id: Ie867e3fa222894886db45f3f6252a62ef3ae354c
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/398752
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
As a preparation for implementing next test cases.
Change-Id: I6f2d8e94ffe168ff42f70d8fcd4cc127e54fccd3
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/398751
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch is used to test iscsi target with 30 target_node connection.
Each target_node uses one lvol bdev based on lvol store and nvme bdev.
Change-Id: I233ed6a32b417b23f2c01975a6c7fce0f46f22f3
Signed-off-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/389431
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This reduces test time - vhost layer itself is not directly
impacted by thin provisioning so there is little benefit enabling
it on both vhost-scsi and vhost-blk tests.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id2d891767f0326d225a98771d52b519d96fe6319
Reviewed-on: https://review.gerrithub.io/399962
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Some of the lvol tests use NVMe namespaces instead of
malloc - use vbdev_split to reduce the size of the
bdev on the NVMe namespace which will help speed up
the tests.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1384ec97badf60a0f5e6aac91a8c47fb6dc93cd5
Reviewed-on: https://review.gerrithub.io/399959
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch is to add the support of periodically
running poller. A setting is added for the increased
time so that the poller on that thread can be running
or not depending on the required setting.
UT code also added for this new functionality.
Change-Id: I0d012ddb18c9b0f6ae8aa877a30d214d6ba34946
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/398359
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Update the method which used to get the number of test cases.
Change-Id: I4982fdabdac519b2a67ed11b3fc4b4a7ccf07bcc
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/399795
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This isn't a significant effort to fix, so let's just enable it to move
closer to the official Python PEP 8 guidelines.
Fix up the existing instances where we didn't already have two lines
between functions, and re-enable the pep8 warning.
Change-Id: I9cf5e7e32b9c6dfedbd1b0f9bc92951cbb2c8a0d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/399949
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reallocate the send buffer if more data is written by the RPC handler
than currently fits in the buffer.
Change-Id: I590dd173b843aba48c768adfafaf87e4b47bcc19
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/399925
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It is not ideal to have to add this in a bunch of
different Makefiles, but further consolidation of
Makefiles is going to be a more arduous process.
With this change, rebuilding SPDK after no changes
will result in no output - all of the "Nothing to
be done for 'all'" messages have been removed. Note
that DPDK build output still remains - this can be
suppressed by either using an out-of-tree DPDK, or
using SKIP_DPDK_BUILD=1 when using the in-tree DPDK
submodule.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib1d45432f2baaa1d9c1b9509906ee1e77966d3ca
Reviewed-on: https://review.gerrithub.io/399918
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie8ddb2a04162a74c8fd778f4e5260536d3aa4335
Reviewed-on: https://review.gerrithub.io/399921
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
New vm_list_all function returns just vm numbers - with no
path. vm_shutdown_all was not modified to add back the path,
so it would immediately think all VMs were shutdown when actually
they were not.
While here, fix a few other typos and nops.
Fixes db0c3174 (test/vhost: avoid setting nullglob's where possible)
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I43c58eac4dba3422cda34a2b8a02d174d4737f61
Reviewed-on: https://review.gerrithub.io/399951
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
This refactors the way we setup vhost devices.
Hopefully when we change internal vhost ABI/logic
in future, we won't have to go through all vhost
test cases and refactor them.
alloc_vdev - allocate *and* register the device.
It makes little to no sense to have a non-registered
device since you cannot call any spdk_vhost_dev_*
functions on it.
start_vdev - simulate a connection on the device
socket
stop_vdev - close the connection
cleanup_vdev - do everything necessary to cleanup
and free the vdev This implies closing the connection.
Change-Id: Ic97f969ec7a57cec7092c0f7681c2e7e44ceb31e
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/399603
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
After 1c164f117d ("vhost-blk: enable vhost block with new added
get/set config messages") vhost-blk "_size_X" workaround is not needed
nor used.
Change-Id: I6d8cb761aba65f6eb080d6d285ebf65de12dc212
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/399670
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If any command fail while nullglob is set error handlers find bizare
shell state and sometimes fail with odd errors. To avoid this introduce
function that will never leave nullglob set after return
Change-Id: Iff8ae410072c4e5f7f9e72e28171fc24e6186f5f
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/397092
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6ae421f23d4e41748d8ac60d71d570ddd71277ff
Reviewed-on: https://review.gerrithub.io/399763
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This allows us to remove the test/lib/bdev/nbd directory.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3941b68c9c36a0e934acf2a0570e69c4d9dba722
Reviewed-on: https://review.gerrithub.io/399762
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic3b1856ebb76fd50e44815157be996e78bc785cc
Reviewed-on: https://review.gerrithub.io/399761
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0ae2294e69262ce0dfc9810815ced2ae16d768b9
Reviewed-on: https://review.gerrithub.io/399760
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3190c98aa27b4723ce525911541efccc7972f733
Reviewed-on: https://review.gerrithub.io/399759
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5ec4b2e1421a1b0ba5ad005d5376a1a556ea4d7b
Reviewed-on: https://review.gerrithub.io/399749
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iac7fe5d4fb816692bda92766002dcb910bb4e558
Reviewed-on: https://review.gerrithub.io/399748
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I85838adb25505c793f09e956740ee66723fe4493
Reviewed-on: https://review.gerrithub.io/399747
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I833ca74093f55ae296d2db4a2dd7a1e482c945dc
Reviewed-on: https://review.gerrithub.io/399730
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I06d33ff7f6df0724768f5a23236485c26e0568f4
Reviewed-on: https://review.gerrithub.io/399729
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4b0704021bc8e9ccbc6ed6ce7ac8eb1efad4a561
Reviewed-on: https://review.gerrithub.io/399728
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This includes removing the nvmf.unittest.mk that these
unit tests were using previously.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3b53db0a565aee910587826b37e8b43d6a324e75
Reviewed-on: https://review.gerrithub.io/399724
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This includes removing the json.unittest.mk that these
unit tests were using previously.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icfa2e5a5554b686002407d1ef5328a0aecb442f1
Reviewed-on: https://review.gerrithub.io/399723
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I53a04187638a8ea4569b18bb4959b0bcf7f3d860
Reviewed-on: https://review.gerrithub.io/399717
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This is the first of a long line of patches which will
reduce Makefile rule duplication in all of our SPDK
unit tests.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1cd6e9e1e9cabab0a15dbcb901e4db782d73b1a4
Reviewed-on: https://review.gerrithub.io/399716
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
These aren't needed - the common %.o rule is sufficient.
As part of this patch, remove OTHER_FILES references from
nvme and nvmf unit tests, and just include these .c files
directly.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I76ab20da2f560c7997e978fcbfe28c2a4907f759
Reviewed-on: https://review.gerrithub.io/399715
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Drop max vhost initiators limitation in SPDK (64).
We're still limited by rte_vhost limits, but
they're set to 1024 at the moment.
Change-Id: Ia1ad25665d6e798bc22709cdd43b72d60f1f4cf0
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/389811
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Rather than being smart and hacking vdev struct
internals, let's properly initialize it with
spdk_vhost_dev_register(). This will avoid
failures on potential vhost changes in future.
Change-Id: I3f13b542e313a2f890963baa96679e9d74c23a9e
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/399443
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This test case doesn't work. The title suggests
that unregistering non-registered device should
fail - but in fact we don't check against that.
The test expects failure, but fails due to a
different issue - the device is in use. And there
is already a separate test for this case.
Device is considered in use when it's vid is != -1,
and we always init the vid to 10 inside alloc_vdev.
Change-Id: I8de1afce8f6bcbd2a6bfbb30870265e30b2a9a41
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/399590
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
For now, this provides common abstraction for Linux epoll
and FreeBSD kqueue. It also provides the basis for future
changes where alternate userspace TCP stacks have their own
mechanism for polling a group of descriptors.
While here, remove old epoll/kqueue code in iscsi/conn.c that
was commented out when the iSCSI idle connection code was
recently removed - we now have a real implementation of it
in sock.c so the original code is no longer needed as a
reference.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I664ae32a5ff4d37711b7f534149eb0eb35942335
Reviewed-on: https://review.gerrithub.io/398969
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Using lower size of bdev might speed up test a little bit
and is enough for this case.
Change-Id: Iaba1b8a771aef58c7b26a880cd351c2ec33f27f2
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/399655
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Increase number of jobs for make to speed up the script.
Change-Id: Ida5a1f590320b80a65648b841a98abc743ea6514
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/399369
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Patch adds internal version of xattr functions to allow
operations on internal xattrs, which are not visible to
upper layers.
When there is at least one internal xattr set, also
SPDK_BLOB_INTERNAL_XATTR flag is set in invalid_flags to prevent
loading this blob in previous spdk versions.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Iec918ec858f069f7cd9f36d5e8f0495ffa4a42d8
Reviewed-on: https://review.gerrithub.io/395122
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I2a3c7a272dc08be5a5ecb4339622816482c4cbb0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Stephen Bates <sbates@raithlin.com>
Reviewed-on: https://review.gerrithub.io/397036
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Enable address translation for I/O buffers within the controller memory
buffer region by registering the CMB using spdk_mem_register().
Change-Id: I44829757ad15fbc3ea96fa494b9fb32dd67a7138
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Stephen Bates <sbates@raithlin.com>
Reviewed-on: https://review.gerrithub.io/397035
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
All vhost_dev_register() tests are negative
- they all expect error. They all were failing
on a single check:
*ERROR*: no cpu is selected among reactor mask(=1)
*ERROR*: cpumask 0x1 is invalid (app mask is 0x1)
That's because we mock cpumask parsing. Even when
"parsed", the real cpumask would always be == 0.
Our unit tests were treating this as a valid
behavior. To really test what they should, we
have to properly implement cpumask parsing. That's
what this patch does.
We should also assert against a specific error
code, not just != 0. But that's a matter for
a separate commit.
Change-Id: Iae93b31292a0d9aee4e773ef568b2052a1de714d
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/399442
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was originally introduced to improve
code coverage in vhost_dev_unregister() where
we used to check against buffer overflow. But
the check has been removed long ago. The vdev
socket path string is validated only on device
registration.
The test case is being removed because it
conflicts with upcoming changes. Rather than
trying to refactor and fix it, let's remove it
- it's no longer needed.
Change-Id: I3bac15725e94b38d375db6376bea4a7b1e44d75c
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/399441
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0dc4b679f1865f9f1222be75f8d9e8d07dfb88ad
Reviewed-on: https://review.gerrithub.io/398962
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
This provides an abstraction layer around TCP
sockets. Previously we just used fd integers, but
we don't want to be tied to integers for alternative
userspace TCP stacks.
Future patches will do more work to enable multiple
implementations of this abstraction. For now, just
get the abstraction in place for POSIX sockets and
make all of the iSCSI changes associated with it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9a825e9e02eb6927c8702d205665c626f57b3771
Reviewed-on: https://review.gerrithub.io/398861
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
This seems to be causing intermittent failures after updating qemu to
a newer version; disable this test until the root cause is found.
Change-Id: I0962e0db1bc244abec3d56483308c3f558d4d7f2
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/399263
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
to avoid renumbering test cases in the future.
SIGTERM should be called as last test case, because
it kills vhost instance. If it is called in the middle
another test case should start vhost again.
Want to avoid this.
Change-Id: Idd3e1492bd83e911d17e730c680187cd98f0c125
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/399131
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Rather than using 'cd' and then ./-relative paths to launch the vhost
test scripts, just specify the full path relative to $WORKDIR. This
should allow print_backtrace to find the script sources for these tests
when failures occur.
Change-Id: I17ca1ebea393df4da427668645ba6f99356a57da
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/398972
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
New vhost user messages GET_CONFIG/SET_CONFIG can be used for
vhost-blk for the purpose to get configuration parameter such
as: Capacity and block size. This commit enable this feature,
users don't need to append capacity any more when started
QEMU. Also event notifier is added for the purpose to change
capacity of block device while QEMU is running.
Also re-enable the vhost-blk tests.
Change-Id: I06ef697984eeea3abbbd655bdcaccaa3b7aa72d7
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/386546
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Install the new custom qemu branch in a different location
(/usr/local/qemu/spdk-2.12-pre) so it can coexist with the current qemu
branch.
Change-Id: I6986dcaef804dcefc4e77c83c019ba0f3be8dbd6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/398983
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Add vhost-scsi and vhost-blk multi-os test case
which used Ubuntu and Centos VM in nightly
Fix vhost nightly readonly case for vm shutdown timeout
The 10s isn't long enough for the VM to shutdown
so the script trap error in line "((timeo-=1))"
in common.sh script and exit
Change-Id: I5a44a2b1bf6b3247383603d5896b8bdde16a9a45
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/393602
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: qun wan <uniqueanna@hotmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The socket-related code was already broken out into
lib/net/sock.c, so break out the header portions
from include/spdk/net.h into its own sock.h.
This prepares for some upcoming changes in how
TCP sockets are abstracted, to enable alternative
userspace TCP stack implementations to be used with
SPDK.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I40b162e72ea80c235b49f10b17c2085fcfb385d4
Reviewed-on: https://review.gerrithub.io/398851
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I351c7bda1b32dc161c49d47fb2887595099e4be6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/396696
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4c75bb8e44e2dadd7b9046beb8ec3b4a39707626
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/392176
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The multithread testing framework is well positioned
for the QoS testing. As QoS will initiate poller for
the rate limiting. Added the related poller functions
and proper poll_thread handling here.
Change-Id: I253a72d3f85af381703dde4e4d0d7366fe682d78
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/393012
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
vm_setup was creating setup with only one disk type defined.
With this patch it can set disk type per disk by adding disk type
after disk name separated by coma
e.g.
vm_setup --disks="Nvme0n1,spdk_vhost_scsi"
Change-Id: Ib89f440210468f4c9082aadcf07ce461e34c4ff8
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/395980
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Will follow this up with a doc change but want to make sure we're
all good with it first. This is meant to not only beef up
blobstore testing but provide the 'match' utilitiy for all test
cases where we are currently calling an executable and either
counting only on a return code to determine success or failure
or worse yet we're just running it and if it doesn't explode we
assume its a pass.
The 'match' util was borrowed from the PMDK folks after first
adding the "ignore" feature upstream to make it easier to use
in SPDK. It works like this:
When the developer checks in a test they create and check in
the output of the test with two different file extensions:
.ignore: should include a string per line for output lines
that we want to totally ignore typically because they're
platform specific so the output could be different from
machine to machine. In this case I'm ignoring all output
lines with 'DPDK' or 'EAL' or '...' in them. The first
few are obvious, the last is because the test tool will
print a varrying number of these as progress indicators.
.match: this is a copy of the output that the developer
'fixes' up by replacing platform specific output strings
with replacable tokens as described in the 'match' help.
This is where you'd want to match an entire line minus
something like a CPU count or free block count or
something. The 'ignore' feature was added simply so we
wouldn't have to edit every single line of an output
file that had DPDK or EAL in it.
Then you modify the test script to save the output and
smply run the match util providing the name of the
match file and if it fails to match the actual output
with the saved output that's been token'ized the script
will error.
The obvious advantage here is that now we can confirm all
of the output from a test executable is as we expect.
Change-Id: I701d36ee83d37b6193e16ed3171e114f814e5eb3
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/397027
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
if vhost retuns error on exit using spdk_vhost_kill, the tests
would continue instead failing
Change-Id: I923d579f9e8614c39b27186418439d185770b3a7
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/398622
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tree-wide cleanup of all instances of printf()-style functions where a
format string contains a space before a newline character.
Change-Id: Ib5b5861e97bed9e9d62db03875547e3f771f4769
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/397031
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
In the different cases to creat a bdev channel, added
a common cleanup function to destroy the resource.
The same function is also called at the bdev channel
destruction.
Change-Id: I81b60cab9df3a8975b0a9982482c9d27899d8a79
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/398351
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This field was only required to check
if we can safely upcast vdev object.
We can just as well check vdev->backend
instead. The vdev->type is not needed here.
Change-Id: I525350957406d4299151e0557b9025ca7bea5371
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/396584
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Instead of:
* spdk_vhost_scsi_dev_remove(vdev)
* spdk_vhost_blk_dev_remove(vdev)
we now have
* spdk_vhost_dev_remove(vdev)
All the logic is already handled internally. This patch only
changes the API. Also, previous vhost_dev_construct()/remove()
functions have been renamed to vhost_dev_register()/unregister()
because that's what they really do.
Change-Id: I7dd0d77bc5b633bec075e0a71345ddbed62697b4
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/396574
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Track individual parts of the setup_vm phase in the vhost initiator test
that builds SPDK inside the VM.
Change-Id: I25c924808db0f934dd53043b06668da96099cf62
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/397285
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Checking uniqueness of initiator group is done without mutex and
before register/unregister. This is not thread-safe.
This patch is a preparation to dynamic addition of initiator
information to existing initiator groups.
Change-Id: I44f48c857210522eee70d14bc3735ec73b0c5c6f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/397032
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Orderings of portal group create operation are diferrent between
config file and JSON-RPC. Unification is necessary for correct
concurrency control and the global accept poller like NVMf-tgt.
Hence unify the ordering of operations in this patch.
Common ordering of portal group create operation between configuration
file and JSON-RPC after this patch is the following:
- create a portal group
- create portals
- add the portals to the portal group
- open the portals of the portal group
- add the portal group to the global portal group list
After this patch, the gap between listening socket and accepting socket
will be increased a little when portals groups are creted by config file.
However this will cause no issue because of the TCP backlog and resend
mechanism.
Besides, necessary concurrency control is added and minor refactoring
is done.
About portal group delete operation, orderings of application shutdown
and JSON-RPC are already unified.
Change-Id: I1db7ef4400388127134d7734c68e138a4573b734
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/396848
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Checking uniqueness of portal group is done without mutex and
before register/unregister. This is not thread-safe.
Hence this patch is added to ensure PG uniqueness.
A little related refactoring is also done.
Change-Id: Iaa3b5e380f2be5cfdaa2d69f9f2763c98954b0c3
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/396847
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Network portal must be unique globally but mutex is not added yet.
This patch is added to ensure it.
Change-Id: I3cdd85fd524b0da767d3cd83022e0637f3a32bc9
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/396846
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
rpc_commands_lib.py: make cluster size optional argument as
sometimes we only need to check if lvol store exists and not
care about details.
Test cases 600 and 601 fix: add missing delete_bdev() at the end,
add using get_lvol_stores to check if lvol store was created.
Test case 601 modified:
Change test case to check if creating a lvol store with cluster
size less than 8192 is disallowed.
Previous check for cluster size of 0 was incorrect as 0 is an
allowed value for that operation and results in setting default
cluster size.
Change-Id: I8bcbed9a7dff3e81fcc0ca4b525da3a1d0627495
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/398370
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The construct_nvmf_subsystem method's "listen_addresses" parameter is
now optional, and new listen addresses may be configured at runtime
using the "nvmf_subsystem_add_listener" method.
Change-Id: Ie0217c5d112e278cc0491a561753f50ed877d842
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/395556
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was probably overlooked when developing 57d174ff6.
Fixes: 57d174ff6 ("bdev: add spdk_bdev_open/close")
Change-Id: Idb30287e740ac0300a5c7dc9fad7e06693f58330
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/398585
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This change will allow reusing this structure for both internal
and external xattrs as well as in functions having optional xattr,
but missing other options (i.e. snapshot, clone implemented in next patches)
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ia6619a75efa0a100168a6f8317be274823af04ab
Reviewed-on: https://review.gerrithub.io/396417
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch is used to test bdevperf on one NVMe disk with 2 GPT partition.
Change-Id: I46f6b5be3f4951625678861ff540629265e8931f
Signed-off-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/390709
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: I004e6ebae38ec923817410f7ad530dd707a307b1
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/393773
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib3507a9e69b210cbd173c88d166025d4579e0149
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/397602
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Blobstore default cluster size is currently 4MiB,
but default lvol cluster size overrides it to 1GiB.
Additionally add -c flag in lvol tests to set cluster
size for tests.
1GiB was fine without thin provisioning, but we do not
want to allocate and copy 1GiB of data for newly allocated
clusters on thin provisioned logical volumes.
Note that 4MiB is same as default for Linux LVM.
lvol test case 601 had to be modified to create a malloc
LUN less than size of default cluster size. This test is
supposed to fail - without the change here, creating the
lvolstore would work, but the script still considered it a
PASS. Defer fixing that to a separate patch - for now just
keep the same test process.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ic05defbf8e641f613f0ec74175a37bc25986e496
Reviewed-on: https://review.gerrithub.io/397562
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Iddbc490d1bf311f6e4b6e3ea3b7bdb72889bb2d3
Reviewed-on: https://review.gerrithub.io/394972
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I154cea95996b7ad208a9101542afd8c4ea774985
Reviewed-on: https://review.gerrithub.io/397116
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ie6a651d0238d09729e28d5456a84ba090faeb465
Reviewed-on: https://review.gerrithub.io/391568
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ibc9609ad36188006e9454e5c799bccd8a92d7991
Reviewed-on: https://review.gerrithub.io/391422
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds support for live migration for vhost-scsi and vhost-blk
backends.
Change-Id: Ibfc8a713dbba14ba8cb38377a71e28fd340b1487
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/394203
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will be needed for thin provisioning, since a write
I/O may result in needing to insert a cluster into the
blob and that write I/O may not have been performed
on the metadata thread.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I84b0cb6e7af87b1f9c6cab4e2c24fa26b12e2c06
Reviewed-on: https://review.gerrithub.io/396737
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The test system may not have qemu-img installed system-wide, since we
build a custom version of qemu and install it in a non-standard path.
Change-Id: I52e16fc7bbf90b9c3d0832f6a81c5cfecd5f24ed
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/396675
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Chen Wang <chenx.wang@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Code refactoring to accommodate for coming hot-remove tests.
Change-Id: I41cfb04b467bf21a5a991712791ee6bfc87c241c
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/391957
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add api and unit test functions for
change number of blocks for provided block device.
Change-Id: I55d67c99375cb88bdaa79ce1a36d4298223beddc
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Reviewed-on: https://review.gerrithub.io/390802
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia1ccf8091fb2dbbb97a7acecc230d9f6cb7c1002
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/391257
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
New tests are performed on guest vm where vhost scsi
controllers are presented as a virtual pci device.
Some changes in common.sh had to be made to allow to build
spdk on vm and to set queue number.
Change-Id: I8289d6aede6020e958c9e5aae893591d844cdbcf
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/394248
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
I missed the libelf-devel and flex in my initial version.
Change-Id: I892c4e15c3704f0ca51ff0fac4e375c456258e83
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/396475
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Fixes github issue #218.
This patch introduces spdk_cpuset object to store and manipulate
the set of individual CPUs. The main objective of this object is
to replace cpumask declared as uint64_t and extend the limitation
of supported CPUs (lcores) above 64 CPUs.
spdk_cpuset is always allocated dynamically and accessed by opaque
pointer, what makes it easier to extend in the future without
breaking API/ABI.
This patch also extends parsing function allowing to set cpumask
using a list of cpus e.g. "[0-4,10,12]" sets mask of 0,1,2,3,4,10,12
as well as hexadecimal string with and without "0x" prefix.
Change-Id: I475c3ba7fab629021a22e03176e57e400dd24a49
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/390794
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I25f62d221c251a2ce455bfca7f686bb5817aa7d6
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/394199
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Add vhost-scsi and vhost-blk fio test cases which used more cores
and controllers in nightly
Change-Id: I51b47f6272c1b29dff890384087014627238dc68
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/389072
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added execute permissions and -p to a few mkdir locations to
make re-running after an unrelated failure a little cleaner.
Change-Id: I67592fc4dd91839979fdb8eeda38dcdbcd4b7700
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/395865
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also move the test plan file to a more appropiate location.
Change-Id: I462058279d4d2dc03790657b82b3cfeb00c8a93a
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/394180
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
To cover fio_plugin as host with nvmf lvol backend.
Change-Id: I5c602d95421f1ab6d2dde660c1833c953c2e5c75
Signed-off-by: wenzhong wu <wenzhongx.wu@intel.com>
Reviewed-on: https://review.gerrithub.io/390381
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
PAGE_SIZE just happens to resolve to same value as SPDK_BS_PAGE_SIZE
on x86-64, but at least some ARM systems do not define PAGE_SIZE
in headers included by blob unit tests, which is only reason this
discrepency was not identified until now.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie4afbc35263d6c17eafa1abcbf3d342942c80ab0
Reviewed-on: https://review.gerrithub.io/396320
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
-perform rw tests on all devices
-perform unmap tests + rw tests to match number of jobs and queues
Change-Id: Ica59ea3667c1c3a639ec9cded0fd43ea9d83ef03
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/394074
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
With multiqueue all jobs run in parallel so
test execution time will not be extended
Change-Id: I6187ee0acf6958b137ba74dd34706538197ce966
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/394389
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This patch is used to test blobstore automatically
which based on examples/blob/cli/blobcli.
Change-Id: I0309cf01d1561f309574a37aeaff8bfbc395f65c
Signed-off-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/386186
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
iscsiadm installed by some Fedora releases, like Fedora 27,
loses DataDigest parameter unintelligibly.
Change-Id: I6664146c6e0cb8933188b29166bedd087f4d38e1
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/396076
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fedora 27 ships with Clang 5 which throws an erroneous error in the
add_ns subsystem test. It believes that subsystem.ns is a null pointer.
In order to circumvent this error, I add an assert to bail out of the
test if the pointer really is null and then only execute the final
assert if the pointer is not null. This way our tests will still pass
Scan-build tests on Fedora27.
Change-Id: I54d3fae485d56033ba5eb23b0aa323480ae6a6e4
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/396051
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently, there is no possibility to save read only blob to disk.
This patch modifies behaviour so that read only flags are applied after syncing blob.
This is analogy to resize, set xattr and remove xattr operations.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Iffed601c78cb83231bb20e7ef05b73847dc3c95a
Reviewed-on: https://review.gerrithub.io/394243
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Add vhost-scsi and vhost-blk filesystem test cases with
lvol and nvme back-end in nightly test
Change-Id: Id2cccd9a45aaa995bef90415855835b93447f2e9
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/390923
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_vbdev_unregister() is part of internal bdev API,
yet bdev module that uses spdk_vbdev_register() directly
will not be removed correctly when using delete_bdev RPC.
spdk_vbdev_unregister() is now consolidated with
spdk_bdev_unregister().
This comes up when deleting lvol bdev, as it does not use
spdk_bdev_part_* functions.
base_bdev->vbdevs entry was not removed for bdev that lvs
is created on.
Additionally patch expands test to create lvol bdev,
after removing it using delete_bdev RPC.
With ASAN enabled this would report accessing
already freed memory previously.
Change-Id: I9547e83862e2daa50355d56a1c9f453aaa6cfdb8
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/395711
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
vhost I/O only need to be split on 2MB boundaries if
there is a break in the VM's memtable at that 2MB
boundary.
This should drastically reduce (if not eliminate)
the intermittent test pool failures seen recently.
virtio limits number of segments to 128, but this
2MB splitting could introduce additional segment
breaks which we do not allocate IOVs for. In almost
all cases, there are no memtable breaks except at
low 2MB, so most of the extra segment breaks we are
adding are unnecessary.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I12d85c289ad80c7bb65e3d2030a2405092b19deb
Reviewed-on: https://review.gerrithub.io/396058
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Some upcoming changes will effectively render this moot
anyways by adding an epoll/kqueue descriptor to poll
on in all cases (not just connections that have been
idle for 5ms).
The epoll/kqueue code was just ifdef'd out instead
of removed - some of this code will be useful
and reusable with minimal changes in the upcoming
patches.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0c354390537e6369cb3c32e78a59c300dec6d098
Reviewed-on: https://review.gerrithub.io/395553
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
This function was originally named spdk_iscsi_write_pdu()
in lib/iscsi/iscsi.c. Since this is an operation on a
connection, add "conn" to the name and move it to conn.c.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaad022907d43788108d5b2660306abcf5e94040d
Reviewed-on: https://review.gerrithub.io/395522
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Currently setting cpumask to portal is possible only through
iSCSI.conf. This patch makes possible for any user to set cpumask
through JSON-RPC too.
The following are done in this patch:
- To keep compatibility, cpumask parameter handled as optional.
- Python test code is added.
- Current python script for JSON-RPC does not work correctly for
IPv6 and the issue is fixed.
Change-Id: I42ef397ce95040a36db4430417a35e9e97527477
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/391728
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The nvme.sh will report error If more than one NVMe devices in the system.
Update the nvme.sh to fix this issue.
Change-Id: I9685394ec53eb036f7580a383619bca559f95c60
Signed-off-by: xuhuagen <huagenx.xu@intel.com>
Reviewed-on: https://review.gerrithub.io/394870
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently cpumask cannot be specified for each portal when it is
created by JSON-RPC and portal group creation is not unified
between iSCSI.conf and JSON-RPC.
This patch does the following:
- cpumask string is decoded in spdk_iscsi_portal_create() which
is common between iSCSI.conf and JSON-RPC.
- parsing configline of portal is difficult to understand and
hence it is refactored.
- UT code is added.
JSON-RPC will be added by the next patch.
Change-Id: I13b9989263fae5facff260de32a55ec99f5d5a06
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/392447
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is to help facilitate the update of the fio_ubuntu binary to fio-3.3
Change-Id: I4c896dc60255f821a5cf66af818396f210304f07
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/395394
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When there are two bdevs built on the same io_device,
it is possible that one bdev entirely saturates
underlying queue, not letting the second bdev issue
a single I/O. The second bdev will silently fail any
subsequent I/O and append it to the nomem_io list.
However, since we resend I/O only from I/O completion
callback and there's no outstanding I/O for that bdev
(io_outstanding==0), the I/O will never be resent.
It'll be stuck in nomem_io forever.
This patch makes nomem_io list to be shared between
bdevs built on the same device. It is now possible
that I/O completion callback from one bdev will retry
sending I/O from other bdev.
The shared bdev data is based on thread-local
bdev_mgmt_channel, so doesn't need any external
synchronization.
Change-Id: Ia5ac3a1627ce3de4087e43907c329aa7d07ed7c7
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/394658
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
See subsequent patches for details
Change-Id: I17dd842cb6df0b1a6ee3e2745a265cbef321336e
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/395165
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fix the nightly vhost readonly test case issue
in physical machine.
Change-Id: Ie0799f06268bcef4a230b162bc70266ce4aae8cd
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/395014
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These broke due to a conflicting merge that wasn't
found until both were committed to master.
Fixes 3b3c6002c9.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia0fc045a1e5d46cc42e5b4ec985bf1ade4417d85
Reviewed-on: https://review.gerrithub.io/395173
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch makes possible to set and get Header Digest and Data
Digest of target.
Change-Id: I1d1b892f9dfb747c0f5ad8fc4fddef40929b4143
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/394482
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
When a target is created by iSCSI.conf, only valid CHAP params
are passed to spdk_iscsi_tgt_node_construct().
When a target is created by JSON-RPC, help information encourages
users to specify valid CHAP params but
spdk_iscsi_tgt_node_construct() does not check CHAP params and
users can create targets whose CHAP params are invalid.
Change-Id: I7e9057a982f21f04782481cda74208a139c1fdad
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/394481
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add JSON-RPC to add an LUN to an existing target. The parameter
lun_id is optinal and if skipped, the lowest free LUN ID will be
assigned.
This JSON-RPC is tested in iscsi_tgt/rpc_config.
Change-Id: I010619f2d4ccec89c589bb0618466b4d15949ebb
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/385181
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Removing an LUN from an existing iSCSI target is possible by
removing the corresponding BDEV. However adding an LUN to an
existing iSCSI target is not possible yet.
Add a new function spdk_iscsi_tgt_node_add_lun() and related
functions first toward supporting this function.
JSON-RPC for this operation will be submitted an another patch.
Informing the newly added LUN to the initiator is not included
in this patch. Hence this operation is possible only for any
inactive target.
Change-Id: I3a28f4d75a17126e49c9d12ce64c3ad68f231840
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/385180
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Iadb29a8ce8dcebfea68d4feeb5f3de1bb3124f16
Reviewed-on: https://review.gerrithub.io/392286
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ib3470fbac49e92308ed14e20ccde6655354f2580
Reviewed-on: https://review.gerrithub.io/389577
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
bdev hotremove event is send directly to hotremove callback given
during spdk_scsi_dev_construct() call. So any bdev hotremove might be
promoted to whole SCSI device removal (like in vhost) wich will trigger
LUN removal. But after returning from hotremove callback LUN and device
might be still referenced (eg to register poller or by outstanding IO).
Even worse: spdk_scsi_dev object is not dynamicaly allocated but
returned from static array which mean there is no way to detect
use-after-free error on spdk_scsi_dev by any tool. This might lead to
using SCSI device that is freed or assigned to different device.
To fix this:
- always delete LUN using hotremove path
- defer spdk_scsi_dev delete/removal after all LUNS are really
deleted.
Change-Id: I65598bf42cd507f620095dff5d32509a0424d060
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/393674
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This was causing failures in the test pool.
Test run shows there are still issues with this script
that need to be debugged.
Fixes e6e2fc5b07 (test/vhost: don't call vm_setup.sh helper script to setup VM)
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic8f63ceffe77e6ec9fc10ecb0c852b6070f96935
Reviewed-on: https://review.gerrithub.io/394592
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
iscsi_tgt tests with different header and data
digests configuration.
Change-Id: I6e444eacccebccd66c099ea349be4bdeb063ba67
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/393717
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There is no need to keep a lun name anymore - we always
use the bdev name as the lun name so it is not providing any
additional value. This also keeps us from associating
the same bdev with different LUNs on different iSCSI target
nodes or vhost-scsi controllers.
Side effect of this change is:
1) Use "bdev_name" across the APIs to make it more clear
what these names refer to.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3d42fde22087352ce1d5dc80178bd8c5cac8cb7c
Reviewed-on: https://review.gerrithub.io/390843
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Splitting an iSCSI task into primary and sub tasks is complex
operation and a degradation was caused for it.
Hence adding test codes is required but there is no UT code for
it yet.
primary->bytes_completed is for read completion from bdev and
it is tested by this patch.
Additional test codes will follow:
- primary->bytes_completed is tested when read tasks do not
complete in order.
- primary->task.data_transferred is for write completion to
initiator through network.
- primary->task.data_transferred is tested by another patch
because primary->bytes_completed is used in iscsi/conn.c but
primary->task.data_transferred is used in iscsi/iscsi.c.
Change-Id: I94b47048111a3d3b249b84d5c54941b0a89ccd40
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/394143
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch provides logic for returning errors instead of
assert when size is larger than blobstore size.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I16d12338e2b682c39bd33d507d57ea126501a0d7
Reviewed-on: https://review.gerrithub.io/392749
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We define 'size' and 'offset' parameter as % of device so on nvme
devices the tests are run with big files and small on malloc so we
can remove the 4G test case
Change-Id: I4840e859732696dd981ab0ab11e5270c025ff248
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/391838
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
test virtio devices created from scsi controller with multiple targets
Change-Id: Ibef135c4dc6fdb324bec6b42c9e532add92e656a
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/391836
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Recovery code did not claim clusters taken by metadata.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: If6726eddd22f4e1a3f9814b2348243155fb0fdb9
Reviewed-on: https://review.gerrithub.io/394173
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
io_queue_size is 256(default) in stub.c, it probably be a limitation
for some performance testing.
Change-Id: Iaf4a15966e7b814323bd8bf134d8f657635aca8e
Signed-off-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/394168
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Removed task `pending` queue. All tasks were
temporarily put in this queue just to be moved
out of it yet within the same reactor cycle.
Change-Id: I32d402f7abd3cfa21c263f41149425abdc71992f
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/393911
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The NVMe spec states that nqn names are to be encoded in utf-8. The
prefixes of all nqn's are already required to be ascii by virtue of
their structure so they are already valid utf-8, but the user specified
strings should be checked for valid utf-8 strings.
Change-Id: I20090d366e93e98af4932eaa120d4edb6e512206
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/394118
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Modifies spdk_env_init() and spdk_mem_map_init() such that
they return on failure instead of terminating with exit()
or abort().
Change-Id: I054c1d9b2e46516ff53d845328ab9547f54bdbc4
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/393987
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Instead of inserting a task into the TAILQ and then
immediately taking it back off, just pass the task
to bdevperf_submit_single instead.
This reduces overhead of bdevperf compared to nvme/perf.
nvme/perf does not use a TAILQ at all, and does something
similar by passing the just completed task so it can be
reused by its submit function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I574b459a32ebe2e91ac1351de360de86cbc4a86d
Reviewed-on: https://review.gerrithub.io/393833
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
key file
When using '-x' option some loops produce huge amount of useless debug
logs. It would be good to have different log levels but for now let
silence those places.
Use 'readlink -e' while checking default ssh keyfile path. This ensure
to fail if keyfile is invalid link.
Change-Id: I1e24fe02a3e1a1646b710e5e3d8c2ee2c1abf2a4
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/393799
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This only adds the option and metadata flags.
Actual functionality will be added in an upcoming commit
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I66015f48f34d4c7c64fce1831ebaed134098407c
Reviewed-on: https://review.gerrithub.io/390196
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch fixes issue when blobstore doesn't serialize flags
when there is also at least one extent or xattr.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I85d5031dc45df510cebe1acf4694ab62bca2e720
Reviewed-on: https://review.gerrithub.io/393770
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Forwarding http/https might increase boot time in some distros (like
Ubuntu). Test don't use it so might be removed.
Change-Id: Ia9f07bbae03c37888bcf06fec480577ae79e78cd
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/393176
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
vm_setup.sh is a proxy script for vm_setup function which should
be called directly.
Change-Id: If9cd70a9bf67a743144142ea75887dfbd539b38a
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/393160
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This fixes b21fad1a80 (nvmf/subsystem: spdk_nvmf_valid_nqn fits nvme spec).
This patch was not rebased before last revision and some of these functions
had changed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0904d962409de280ffbc3c07108815811caf5e26
Reviewed-on: https://review.gerrithub.io/394110
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Added tighter regulations to the NVMe-oF nqn checking to conform with
the nvme 1.3 spec. including, adding checks for valid nqn's in the case
of a generic uuid based nqn and checking for reverse domain name and
colon prefixed strings in a user specific nqn. Unit tests included.
Change-Id: I3ee4b269d0655ac9968699617e43e3297695c7ed
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/393265
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This requires exposing struct spdk_io_channel in the
public header - mark it as internal with Doxygen
comments to make it extra clear that applications
should not use the data structure directly.
This is a very hot function in the main I/O path,
so making this function inline has a significant
performance benefit. A bdevperf microbenchmark
using null bdevs shows a 11% improvement.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I70e30e184000705704bb004e8da1c7476a6aceeb
Reviewed-on: https://review.gerrithub.io/393824
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
vm_run.sh is a proxy script for vm_run function which should
be called directly.
Change-Id: Ia7ac242fe8c24b9ce76e6d5483bd52f84225b0bb
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/393159
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
run_vhost.sh is a proxy script for spdk_vhost_run function which should
be called directly.
Change-Id: I6ca3e049e812bf05c9251e16c75f6ff90c3b0f0a
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/393145
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
helpers
So we can better trace what failed.
notice - just echo to stdout
warning - just echo to stderr
error - echo to stderr and return false, so trap ERR can catch this
fail - like err but call 'exit 1' at the end so if no trap ERR is used
it will exit anyway.
Change-Id: I5c7b3682fd6c0d81c07c58a5ec965155c7593407
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/392218
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
nbd functionality now can be gotten by nbd rpc.
Change-Id: I85ebcb44d9ed263bcee19162dc060f3b268dddcd
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/391371
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Test nbd rpc methods:
start_nbd_disk
get_nbd_disk
stop_nbd_disk
Verify nbd data read and write by dd and cmp.
Change-Id: Ie32639d11727893ceac7adce0119b9c2085e74e1
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/391732
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Retrieve LUN data directly from struct spdk_scsi_lun rather than copying
them into struct spdk_scsi_task, and access the LUN via the task->lun
pointer.
Change-Id: Id8745f116bc559fb2f9e58811c2b9781c8cbdae8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393709
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
And perf as host with nvmf lvol_bdev backend and test differnet qd
and io_sizes in nightly(Proting from DTS).
Change-Id: I857fb66488d644ae0cc092dc1fff3370be09ba5e
Signed-off-by: wenzhong wu <wenzhongx.wu@intel.com>
Reviewed-on: https://review.gerrithub.io/387556
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I21be11c2a8428fdc711c404bf3ce489979159ed5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393712
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
The SCSI layer no longer needs to know about the parent/subtask
relationship maintained by iSCSI.
Change-Id: Ia6f7c5367c5b656bd7521ed1abb6d0f713a0500b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393697
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
it appears that scsi name string designator
format in SPDK is not correct. The name strings
are not null terminated (which causees garbage
to appear in scsi_inq -p 0x83). Further, they
are not padded correctly.
SCSI port name and device name strings must be null
terminated. Further, the length must be a multiple
of 4 bytes, and must be padded with 0s.
See SPC-5 Section 7.7.6.11.
Change-Id: Id7c4ad27e5c3a17ad68e5e466142801c0d03b1f2
Signed-off-by: Karandeep Chahal <devilsgrotto@gmail.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/393027
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch remove need for additional buffer when translating error code
to string.
Change-Id: Iaa60088b5c450581d3cdddbb425119b17d55a44b
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/386114
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also added vbdev_get_lvol_by_unique_id function.
Change-Id: I55a64df008c23c0fedb8a59ef67e2c356097e780
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Reviewed-on: https://review.gerrithub.io/392658
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Added aliases list to bdev struct.
Added 2 API calls to add and remove aliases.
Added test for adding and removing aliases.
Change-Id: I1815aec8c02cfa398b2d1de41577197315665fdc
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Reviewed-on: https://review.gerrithub.io/390200
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Copy fio config to guest VM with the same name instead of
renaming to /root/fio.job.
Use the same file name for creating log file in desired directory.
Remove not needed ls command in common/run_fio while at it.
Change-Id: I9e13d8cd6f7892a77d89afb99f7d57ef79f7b11f
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/393469
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
There used to be a fixed 1 second of real time performance
display with the "-S" parameter. Make it as a configurable
parameter, the minimum interval is still 1 second while user
can configure a larger value.
Change-Id: I159d867f2b6019b095d0291c436f01b110ff69d8
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/393306
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When LUN with no io_channels is being hotremoved,
the hotremove poller was being started on the core
pointed by lun->lcore. However, this field is only
valid when there are io_channels open. For example,
when user tries to delete a bdev that's attached to
an unused vhost controller (no io_channels ever opened)
the scsi layer could start a hotremove poller on
lun->lcore == 0. If SPDK runs on a different cpuset -
not containing CPU0 - SPDK could even segfault.
Change-Id: I31a363352875d944f220b0296d5cfe570319023d
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/371863
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There's a bug lurking somewhere in vhost
shutdown path causing intermittent
failures. Sending a SIGABRT instead of SIGKILL
will make the process dump core. We could use
it to speed up debugging.
Change-Id: I0825deecbf26e32ff073fdbcdfe42640c52453b9
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/393477
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a new file, scripts/common.sh, that can be shared between not only
autotest scripts, but also scripts/setup.sh, scripts/gen_nvme.sh, etc.,
and move the PCI iteration functions there.
The iterators are also expanded to work identically for both dev_id and
class_code on Linux and FreeBSD.
Change-Id: I98423cd06242e78535f5da4fce82166812ea96a8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393416
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For now, our scripts don't support detecting mounted filesystems on NVMe
devices on FreeBSD, so only run those tests on Linux.
Change-Id: I558715bf4e95eaad2dd2d8a546626269c0837edb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393420
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This test ran for 10 minutes, which is half of the allotted time for the
entire nightly test run.
While we're here, remove some of the duplication - we don't need to run
both the nightly long run and the shorter normal test run of the same
test, and they should be grouped together.
Change-Id: I66385054d425fb8b032e282050fd39e927a8eb80
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393095
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The task resource is allocated one by one and when it fails
to allocate at some point, call the explicit destroy to release
the resource.
Change-Id: Ida916ed25a279806fee76104990f1f92daf3e1b6
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/393009
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The iscsi_tgt test scripts can assume that the default case is testing
on a local machine using the kernel TCP stack; add a fallback TARGET_IP
and INITIATOR_IP to make it easier to run the individual iSCSI tests
outside of the autotest.sh framework.
Change-Id: I07c58201691dc5f053d5f67787768dfee4110f73
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393214
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use the SPDK env layer functions to get the number of cores and iterate
over core numbers.
Change-Id: I77870ebcffc07db680bbb3783fbe5944cf88e2ea
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393188
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Only Makefiles for libraries that directly depend on DPDK (rather than
the SPDK env abstraction) should add $(ENV_CFLAGS).
Change-Id: Ifdf44d3ef8c42bbf7f20edd524b330d00658235b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/392818
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Netmasks with 0 bits of prefix do not make sense. For example,
192.168.1.2/0 would allow hosts from any address, but this is
indicated with a special "ANY" value rather than a normal netmask.
Netmask prefixes of the full address size (e.g. 32 for IPv4 and 128 for
IPv6) are still allowed, since this represents a valid configuration
that matches a single specific address.
This also allows the IPv4 netmask math to be done entirely in uint32_t
instead of promoting to unsigned long long to avoid undefined behavior
when bits == 0 (shift count would have been 32 in that case).
Change-Id: I021b718e6a46f628c96a358edae816de81cd8929
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/392969
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ibffb43e39b44e5f443d3dfbfa5b5d7dcac3243ef
Reviewed-on: https://review.gerrithub.io/391182
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ic2c23d16360b26359c2a32920b89f2f3a21a2a9a
Reviewed-on: https://review.gerrithub.io/391191
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This allows the user to pause a subsystem, make some
modifications, and then resume it.
Change-Id: Ia18371023d8fc66e1797fda293a01b68c0a61c96
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/392422
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We can use spdk_env_get_core_count() to determine the
core count
Change-Id: I854ec86f10c5670b02295214d1d36fe5d57e31a4
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/392934
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I79c2c30e15b8254c3cb75af5615dfafee84a9abd
Reviewed-on: https://review.gerrithub.io/392709
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently, each histogram range is hardcoded to
128 buckets (1ULL << 7), resulting in 58 ranges
(64 - 7 + 1) and a total size of 58 * 128 *
sizeof(uint64_t) = 59392 bytes.
To allow for more usage models in cases where this
size is prohibitive, enable the following changes:
1) specify number of buckets per range (in number of bits)
2) specify max datapoint value (in number of bits)
The latter can be useful for cases where datapoints
are never close to requiring all 64 bits - and allows
reducing the number of ranges. Any data points that
exceed the max will be tallied in the last bucket
in the last range.
Testing shows no performance disadvantage using the
dynamic approach.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5979bcdff6209faaa9dee293918ef2a78679bcd4
Reviewed-on: https://review.gerrithub.io/392707
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I050ecd4f3bbccbd527387d080ce595fae16479d3
Reviewed-on: https://review.gerrithub.io/392704
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Use spdk_bdev_unmap_blocks() in place of spdk_bdev_unmap(), since the
SCSI UNMAP descriptor already natively operates in blocks rather than
bytes.
Change-Id: I16a0c38d203cf5f60484229e7872783b11d8de6e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393202
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Use spdk_bdev_flush_blocks() in place of spdk_bdev_flush(), since the
SCSI SYNCHRONIZE CACHE command already natively operates in blocks
rather than bytes.
Change-Id: I11810948fb8d0b6b911d48620e2a363f767cc7f7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393201
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Adopt two improvements for iSCSI by Ziye to VHOST.
- iscsi/conn: remove rte_config.h header
- env: export spdk_env_get_last_core function
Change-Id: I8f067093d593c8d483c52587669f8b0b706f497f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/392910
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The latest patch for the iSCSI connection is applied to the vhost
too.
RTE_MAX_LCORE in the for loop is removed and the for loop is
replaced by SPDK_ENV_FOREACH_CORE().
When the cpumask is unexpectedly 0, not 0 but the first core is
returned.
Change-Id: I39cfc2219a3532eccc8c0ce59712102b947a76d7
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/392588
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
update help message to match reordered and new test cases
Change-Id: Id85391cfc84c1ee1567cae07da9ff797a95a6f68
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/392675
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A few previous changes replaced ALL by ANY for the initiator group
because ANY was normal for this case. ANY was tested enough for
the initiator name of the initiator group but not tested for
the netmask of the initiator group.
Hence the previous changes caused degradation.
This is the bug fix and UT code is added together.
Change-Id: Idf7642dd4c111a4788aca31a0105b3497631aecd
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/392923
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Current relative work dir path caused problems with downstream
test scripts when running spdk_vhost.sh using relative path
Change-Id: Ifd47bd37650a6328cb0f548a03cb4de010093320
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/392744
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tests need adjustments due to patch:
https://review.gerrithub.io/#/c/392587/
Change-Id: I098aca99fe22a9e01246da74b4b9fbf25f4b5b99
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/392745
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Ibd3e485085793260ca4bb2bfa3da6025b2c997aa
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/392450
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The latest change for the portal group is applied to the vhost.
The following comment is quoted from it.
Currently the cpumask must be a subset of the reactor mask.
However, this is different from sched_setaffinity() function
and taskset command of FreeBSD and Linux. The latter will
be familier for more people. Hence the later is adopted.
The following is quoted from the FreeBSD Man Page of taskset:
The CPU affinity is represented as a bitmask, with the lowest
order bit corresponding to the first logical CPU and the
highest order bit corresponding to the last logical CPU.
Not all CPUs may exist on a given system but a mask may specify
more CPUs than are present.
A retrieved mask will reflect only the bits that correspond to
CPUs physically on the system.
If an invalid mask is given (i.e., one that corresponds to no
valid CPUs on the current system) an error is returned.
The masks are typically given in hexadecimal.
Change-Id: Idcd72a12ef52e4ccec8476e7d54fab82867cf936
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/392587
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This can be used for two purposes:
1) more quickly iterate the blob list, avoiding
metadata pages that are valid but not the first
page in the blob's metadata list
2) close races between delete and open operations -
now we can clear the bit in the blobid bit array
when the delete operation is in progress, ensuring
no one else can try to open the blob
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3904648fd6fa656cb98c9e17ea763ed5a84ef537
Reviewed-on: https://review.gerrithub.io/391695
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Number of susbystems for test on physical server increased.
Due to SoftRoce limitations number of subsystems is not
increased for VM tests.
Change-Id: I6875204238f55f4bc4a819512ee0fd6a46c44fee
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/380459
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
SoftRoce does not implement enough queues
for multiconnection tests and cause test pool failures.
In case interface used for test is software
emulated - reduce number of NVMf subsystems in test.
Change-Id: I52cc78015e72603c487a5774b91c6bd4523326b0
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/392357
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Purpose: To avoid overflow, if the passed value is too
big.
Change-Id: I59d31c0baa742cab14e22dcd88a61cb5adca247a
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/392579
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was removed some time ago.
Change-Id: I5e4b588fb881793d750999ff73e8bf891cb58fc0
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/391952
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Make shell scripts prepare fio jobs and just call run_fio.py to run
those jobs. This way run_fio.py don't need to know anything about test
environment configuration.
Change-Id: I10b6954011855e9139ff7b5372070ec553009d33
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/391929
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
A couple of the lvol tests delete the nvme bdev, then construct
it again to test lvolstore tasting. But constructing the nvme
bdev and then the tasting can take a tiny bit of time, and if
we check for the lvolstore too soon, it could fail. There are
a large number of intermittent test failures in the test pool
that show this signature.
So sleep one second to allow time for the tasting to complete.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iebabe09458302d8300e704f232fdbb245b562268
Reviewed-on: https://review.gerrithub.io/392559
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I6ddce54d24570099f5237ea3acbac7e3be78e520
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/392434
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7174f1799361b8337ff5590b90ad6a0564ca8e9b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/391899
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use double-precision floating point in the performance_dump() function,
since we can be dealing with large numbers (especially now that
io_completed is now uint64_t).
This isn't part of the I/O path, just used to print statistics, so
there should be no performance impact. Also, the arguments passed to
printf() were already implicitly being promoted to double, so this
actually removes an extra conversion step.
Change-Id: I12aae36bc42e83777eaa050561eb5e55060ae81c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/392414
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
- Removing hardcoded lvol bdevs and blk controller sizes
Lvol bdevs will now be created with roughly equal size based on
size of used NVMe backend
- Create lvol structures and VMs setup independently
Change-Id: Ib1cfe1b60033200a9896fa0c8d1b17af41ea0eb1
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/390983
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In the iSCSI specification, the SCSI device name is defined to be
the iSCSI name of the node.
However, when g_spdk_iscsi.nodebase is used, the SCSI device name
is made of the device specific string (the part of IQN after the
colon).
The size of the temporary buffer fullname[MAX_TMPBUF] in
spdk_iscsi_tgt_node_construct() is 1024 and the size of
spdk_scsi_dev.name is 255. The former is larger than the later.
However the max length of IQN, EUI, NAA are 223, 20, and 36,
respectively. All are less than 255.
Hence even if we use fullname as the SCSI device name, no overflow
will occur. Even if fullname is more than 255, strncpy() does not
write more than 255 in spdk_scsi_dev_construct().
It's possible to check the length of iSCSI name strictly, but I
will do the least in this patch.
Change-Id: Icc6655fcd846797720867c10e316d2951c664030
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/390360
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reason: If test a very long time, it will overflow
when we use int
Change-Id: I729e8cb5862ab78808da5121666b41e599e1dddb
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/392122
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Iba33c55f129c60fad2d58f5254dec5c54ed56805
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Reviewed-on: https://review.gerrithub.io/388217
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It looks that initiator groups which were initialized after
being inserted to linked lists caused failures.
Change-Id: I43f4a6324e77221f0e9657667c0185b15e9c229c
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/392100
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5e19266d5d418e1b356308d2b9efa419c1b22232
Reviewed-on: https://review.gerrithub.io/392002
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
the sysfs for NVMe drives on some older versions of the linux kernel
differs slightly from the latest kernel versions. This patch adds a
fallback to support those older kernel versions.
Change-Id: I2787e0d15d310ce1f264b0a303f53e48525a9a1d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/391983
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
libiscsi will be used to test our iscsi target for spec compliance. I
check out the source from github incase we need to modify it and create
our own branch later.
Change-Id: I2d1c037e1aee47fa7f6f700ae186dd402f9ad52b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/391887
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch does the following things:
1 Set the time period 1 second into a global variable,
then if we modify that value, we will make sure that
we change it in the whole file.
2 Fix the period performance printing data . We should not pass
the time period, but we should pass time period * times, since
I/Os completed are caculated from the beginning.
Change-Id: I1eaaf1655389cbccefdcc879a51fca94028afdcb
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/391421
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
1) move iscsi_pmem to nightly
2) move idle_migration to nightly
3) reduce number of malloc bdevs and lvols for iscsi_lvol
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I63fa5a2634c6edb08db16267972fd21c20fd84f4
Reviewed-on: https://review.gerrithub.io/391976
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I138362d4ebe157926228384ab032c057c03c822e
Reviewed-on: https://review.gerrithub.io/391891
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I619f2e772b38061e26e3c5f2b4014ee73a5f5d81
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/391894
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This prepares for some future changes to blobstore
metadata. For older (pre v3) blobstore disks, we
do not want to try to write new metadata fields,
since in many/most cases, there will not be room
allocated for them.
The current code will keep the existing version -
this is just adding tests to make sure this does not
break in the future.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I866ff39972eb15b5a24fd30fa6b56d649fc06305
Reviewed-on: https://review.gerrithub.io/391507
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
I have no idea why - but scan-build starts complaining about
some missing SPDK_CU_ASSERT_FATAL checks when analyzing the
next patch - even though that patch has nothing whatsoever
to do with the scan-build error reports.
scan-build is really weird sometimes.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3d426384fa4f846abf2eb98fd29ee308d08c1943
Reviewed-on: https://review.gerrithub.io/391875
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Similar to previous change, the ** paradigm is a bit
problematic for asynchronous routines that could fail.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ife7748280482356c4c51a796817b71cd7bc7e479
Reviewed-on: https://review.gerrithub.io/391483
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Using the ** paradigm is a bit problematic for asynchronous
routines that could fail. Currently we were inconsistent in
that some error paths would zero the pointer while others
did not. So make this just a plain pointer, which simplifies
the API and its implementation.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I67147931c6e8350896a4505022a6a314655de3d3
Reviewed-on: https://review.gerrithub.io/391482
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
