Change the type of nvme_timeout parameter in
spdk_nvme_ctrlr_register_timeout_callback from uin32_t to uint64_t.
Reason: This will make the timeout trigger test more flexible and
will not affect the original meanings.
Also for the configuration file, still maintain the compatability
support
Change-Id: I94c90f67b2e9c57220ab82ecea11a1590d62aed4
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/419326
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add some known Samsung controllers to those requiring the quirk,
NVME_QUIRK_DELAY_BEFORE_CHK_RDY. Addresses an issue for those
who may not have later firmware that corrects the problem.
Correspondingly, extend the delay from 2 secs to 2.5 secs.
Change-Id: Iee773905a2a49711775042c061f6c347e0da85e9
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/419273
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
The spdk_dma_zmalloc guarantee about physical memory contiguity
is about to be removed soon. For hardware rings that require
physical memory or IOVA contiguity we will now enforce hugepage
alignment and size restrictions to make sure they occupy only
a single hugepage.
Change-Id: Iebaf1e7b701d676be1f04a9189201c5d89dad395
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/418547
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
All controllers have a controller ID (cntlid), and this will be needed
in other NVMe-oF transports, so move it to the generic controller
structure.
Change-Id: Iaba5b93e1267e7bef3a6eb7c677c549a3d83985c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/416577
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id0408e571362527e7c2d4759223946a0b4d7c675
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/415896
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Factor qpair destruction function so that we can put common
resource release together in future.
Change-Id: I44139947820c2a384b745ae2673799f1b736369c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/412604
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was partially fixed in commit ddeaeeec19 ("nvme: Only check
timeouts on requests from the same process"), but the function that
calls nvme_pcie_qpair_check_timeout() was also erroneously filtering out
the admin queue. Restore the original behavior of checking all queue
types.
Change-Id: I26a44ff5eb772735d314ce7b8322ba9222675911
Fixes: 31bf5d795e ("nvme: make timeout function per process")
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/411628
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For attach/detach command, the identify namespace data should be
updated during the namespace attribute notice event callback, while
here, in case of the driver may not set aer callback, so update the
namespace identify same with attach command.
Change-Id: Ie594b2ff646a67488d03af2771c00f9947395aba
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/412884
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Number of Namespaces of controller identify structure
defines the maximum number of namespaces supported by
this controller, for physical NVMe controllers, the NN
is a fixed number, while here, we set the same rule for
NVMeoF controllers.
After NVMe driver got namespace notice event, it should
update the namespace identify data structure for NS
attach/detach commands.
Change-Id: Id72a2600a2ce9492fa2d6e09924667acbb77ae43
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/412883
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Factor out the common pattern of waiting for an internally-submitted
command to complete. This will give us a convenient central place to
add error checking.
Change-Id: I65334d654d294cfb208fc86d16fa387ac5432254
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/412545
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
As of NVMe 1.3b, there is only one command set. But pipe
this through the driver per-spec anyway.
Change-Id: I4faf8596f5ce638e5e2a500b424e00ceb6e89edc
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/412102
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For the same reason as commit 31bf5d795e ("nvme: make timeout function
per process"), the AER callback also needs to be stored in the
per-process controller data structure.
Change-Id: I41425d81a2ab16c06ef9b900bef6a6128117fcb0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/410953
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The per-process controller data may only be touched while holding the
ctrlr_lock.
Change-Id: I18c8c4e43db4d58e6b86f0c0fd222f6d30830b85
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/410952
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I7598222db5d76c1a1578fbb5935d4348f7c62f54
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/410951
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I9cfc237a8514a1d323313851e14576ba2ba69077
Signed-off-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-on: https://review.gerrithub.io/410529
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8573732b3049e2a5b471e5a0313e39019fdaad5f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/410518
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This will be used later instead of retrieving VS (potentially via a Get
property command for Fabrics) multiple times.
The Active NS List code was previously depending on the VER field of the
Identify Controller data, but this was only added with NVMe 1.2, so we
can't rely on it to detect NVMe 1.1 controllers; it is changed to use
the new cache VS value instead.
Change-Id: Iba9ed5ecbc82b4654973438d119daba0c4cf0724
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/408895
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In addition to checking for the required version, also use the OAES bits
to determine which features to request.
Change-Id: Idb07e4175cca5609904876bd17d912b50bc6b62a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/409352
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ia2fd4d31560c9117b167cbf12d2749c303e4cb8c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/408772
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The functions they were referring to have been renamed; rather than
fixing up the function names, use the spec-defined NVMe command names so
it's more understandable. (The second message was also incorrectly
referring to "set" instead of "get", which is fixed as well.)
Change-Id: Id140a91c837d8c913760d2f55318472689c00f45
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/407593
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Similar to the previous patch, some controllers may report 0 namespaces;
we should still be able to send admin commands in this situation.
Change-Id: Ia14e3ce773c63e645199e1c40ba5b37095da2473
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/407497
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A controller that fails the Set Features/Get Features - Number of Queues
won't be able to create I/O queues, but it may still accept admin
commands.
Change-Id: Iec79d641f7d460448a8d8e1295764f1f03f98594
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/407378
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6e58baaeb09580b5f70e1acf5323376ca0b26bbf
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/407382
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I79dad84d1dc58e61eb36b461b41fbd7ee73631fc
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/406899
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
- Add support for multi page CNS 0x2
- Use CNS value 0x02 (SPDK_NVME_IDENTIFY_ACTIVE_NS_LIST)
to query active namespaces
- Add an API to iterate the active list
Change-Id: Iea524881fa6e3610a7d85ab02a2005a92fd633df
Signed-off-by: John Meneghini <johnm@netapp.com>
Reviewed-on: https://review.gerrithub.io/401957
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows us to remove most uses of spdk_pci_get_device(), which looks
up a PCI device structure from an arbitrary PCI address. This function
is problematic, since it uses internal DPDK data structures that aren't
meant to be part of the public API. There is still one use in the
codebase, which will be cleaned up in another patch.
Change-Id: Ia1fe1f799c240195f6871c1d92821074f884c4e6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/405707
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Convert nvme_ctrlr_cmd_identify_controller() and
nvme_ctrlr_cmd_identify_namespace() into a single function,
nvme_ctrlr_cmd_identify(), with generic parameters that should be
suitable for all current callers as well as future users.
These functions were internal-only, so there is no public API change.
Change-Id: I3dbb3e6b00308b67ba1f161f8a6b11b6333fca57
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/404733
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This lets us have a common place to put definitions like the length of
the UUID string, as well as abstract away some of the API warts in
libuuid (non-const values, no size checking for uuid_unparse, etc.).
Change-Id: I80607fcd21ce57fdbb8729442fbb721bc71ccb98
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402176
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Automatically detect more whitespace errors.
All existing cases are fixed; only whitespace change (verify with
diff -w) except for one comment style fixup in include/spdk/nvme.h.
Change-Id: If750e54b9c8e3421ea6feda5f20184a31431631e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402360
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: I02ca8aed1bba1922a69a9b22bca22bce06e9c55f
Signed-off-by: Pan Liu <liupan1111@gmail.com>
Reviewed-on: https://review.gerrithub.io/399536
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Unify several similar functions checking for a buffer of all zero bytes
into the util library.
Change-Id: Idfbeffa22add34ac9ed1bd75ee27d6bd8b188940
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/400892
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
adding nvme_ctrlr_destruct_finish because nvme_transport_ctrlr_destruct may
use a destroyed mutex.
nvme_ctrlr_destruct() free "ctrlr_lock" and after that call
nvme_transport_ctrlr_destruct()->nvme_pcie_ctrlr_destruct()(with pci)->
nvme_ctrlr_proc_get_devhandle()->nvme_robust_mutex_lock(&ctrlr->ctrlr_lock);
Change-Id: I55714ea9097d2c9d844a00b5a88fa2d51a3f4469
Signed-off-by: Ehud Naim <ehudn@marvell.com>
Reviewed-on: https://review.gerrithub.io/399605
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2a3c7a272dc08be5a5ecb4339622816482c4cbb0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Stephen Bates <sbates@raithlin.com>
Reviewed-on: https://review.gerrithub.io/397036
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This patch set the controller as removed in pcie level when the register
return specific value (0xffffffff), we also return the real value to the
upper level (nvme bdev), which will help the upper level do the work of
hotplug.
Change-Id: Ifad45c760cccbce522506ffbf86495318a6b393b
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/391327
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Require braces around all conditional statements, e.g.:
if (cond)
statement();
becomes:
if (cond) {
statement();
}
This is the style used through most of the SPDK code, but several
exceptions crept in over time. Add the astyle option to make sure we
are consistent.
Change-Id: I5a71980147fe8dfb471ff42e8bc06db2124a1a7f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/390914
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Disambiguate the log components from the trace functionality
(include/spdk/trace.h).
The internal spdk_trace_flag structure and related functions will be
renamed in a later commit - this is just a find and replace on
SPDK_TRACE_* and SPDK_LOG_REGISTER_TRACE_FLAG().
Change-Id: I617bd5a9fbe35ffb44ae6020b292658c094a0ad6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376421
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
NVMe specification 1.3 added a new Admin command: Doorbell buffer config,
which is used to enhance the performance of host software running in
Virtual Machine, and the Doorbell buffer config feature is only used
for emulated NVMe controllers. There are two buffers: "shadow doorbell"
and "eventidx", host software running in VM will update appropriate
entry in the Shadow doorbell buffer instead of controller's doorbell
registers.
Change-Id: I639ddb5b9a0ca0305bf84035ca2a5e215be06b46
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/383042
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I482ad9e722f6fb775c1c91c8661212250a6914bc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/386722
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Some devices may report a RTD3E time that is shorter than their actual
shutdown time in practice; force the timeout to be at least 10 seconds
to allow for a reasonable amount of shutdown time.
This doesn't add any extra delay for devices that do complete the
shutdown process within their reported RTD3E time, since we will return
as soon as the device reports that it is finished shutting down.
Change-Id: I365e66ba6a938400be516df170bd3ff288810caf
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/386719
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When a ctrlr is failed to initialize and to respond other
requests, the nvme_ctrlr_fail() will be always called. Add
a log there to have the traddr information so that applications
can know which ctrlr has the problem.
Change-Id: I951062a51349af81a505472f79e3c00a1ead2fbf
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/386189
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I3db00323c20786713750d13a61b1531d8b1ce7f6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/386087
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
NVMe 1.2 introduced a new Identify Controller field, RTD3E ("RTD3 Entry
Latency"), which allows the device to report the expected time for a
normal shutdown. Use this as the timeout for the shutdown process when
available instead of hard-coding 5 seconds.
Change-Id: I14e7223c81ba397771cf00b49f034f25d21b6e82
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/385301
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
With this new API, callers can attach one specific ctrlr identified by
the transport ID directly along with optional ctrlr opts. If connecting
to multiple controllers, it is still suggested to use spdk_nvme_probe()
and filter the requested controllers with the probe callback.
Two primary use cases:
1) connecting to the NVMe-oF discovery controller
2) more straightforward way to connect a specific controller (avoiding
the probe callback)
A typical usage of this API with specific ctrlr_opts:
1. struct spdk_nvme_ctrlr_opts user_opts = {}
2. Call spdk_nvme_ctrlr_get_default_ctrlr_opts(&user_opts, sizeof(user_opts))
3. Modify the content of the initialized user_opts with user required value like
user_opts.num_io_queues = 8
4. Call spdk_nvme_connect(&trid, &user_opts, sizeof(user_opts))
Change-Id: Idf67ee5966f6753918c12604342c892d2f3bbe3a
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/370634
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This change is relating to add a new public API spdk_nvme_connect() under
include/spdk/nvme.h. This new spdk_nvme_connect() API will connect the user
specified trid and have a user optional ctlr opts. Rename this API and make
it as public.
A typical usage of this API as following:
1. struct spdk_nvme_ctrlr_opts user_opts = {}
2. Call spdk_nvme_ctrlr_get_default_ctrlr_opts(&user_opts, sizeof(user_opts))
3. Modify the content of the initialized user_opts with user required value like
user_opts.num_io_queues = 8
4. Call spdk_nvme_connect(&trid, &user_opts, sizeof(user_opts))
Change-Id: Ideec8247365ebf7dd15069e29821be8ea27b08be
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/380849
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The newly added UT code will exercise the cases that opts_size is
smaller and equal to the current version of spdk_nvme_io_qpair_opts.
This is for the backward compatibilty when SPDK components are built
as the shared library later.
Change-Id: Ic906d765f5b638070e3d9c8e38827577c625b679
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/380893
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a new parameter for the default ctrlr opts initialization.
This is to make sure future compatibility when SPDK components
are built as a shared library. User's version and SPDK's version
may be in different size.
The change here is to make sure the backward compatibility when
new fields are added in the struct spdk_nvme_ctrlr_opts.
Change-Id: Icfc9640993cb06063b825d4df5835d920dd374e5
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/380846
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A random host ID is generated per SPDK application startup if the user
doesn't specify a host ID during controller startup.
This also changes the default host NQN for NVMe-oF connections to a
random UUID NQN based on the host ID.
Change-Id: Ib0f70dd63e53087716842b412a1f134a9991d4da
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/380528
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
SPDK already uses DEFAULT_IO_QUEUE_SIZE and MQES to decide the correct
queue depth of NVMe queue pair, hardcoded it to NVME_IO_ENTRIES(512)
does not make sense if users want to set queue depth bigger than 512.
Change-Id: Iaa73fc79e055292ae9bd19af0c8c12f257ae5c46
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/379052
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Users don't need to provide nvme debug flag for the error cases.
Change-Id: I00c29e2b8ab470b0233d94acec52b4bec129728c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/376708
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Allow the user to set the source address when connecting to a NVMe-oF
controller.
Change-Id: Ice3add4b2cd3b64fdb8d0d7807d2235f90fd86b1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375837
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This matches the name to the behavior and prepares for addition of a new
log macro for "info" log level.
Change-Id: I94ccd49face4309d3368e399528776ab140748c4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375833
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Certain vendors do not report correct number of queues allocated in "Set Features/Number of Queues" completion CDW0 per spec.
As a work around, issue "Get Features/Number of Queues" and rely on the value provided there.
Change-Id: Ib9cc4dcf1bdb732413becc751883a7311c6f672f
Signed-off-by: Konstantin Vyshetsky <kon.vyshetsky@stellus.com>
Reviewed-on: https://review.gerrithub.io/375234
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
PAGE_SIZE is the host memory page size, which is irrelevant for the NVMe
driver; what we actually care about is the NVMe controller's memory page
size, CC.MPS.
This patch cleans up the uses of PAGE_SIZE in the NVMe driver; the
behavior is still the same in all cases today, since normal NVMe
controllers report a minimum page size of 4096.
Change-Id: I56fce2770862329a9ce25370722f44269234ed46
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374371
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ia45d356fbc2c4baea86a96eb28264f104f593a9c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373156
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For pcie, this just equals the number of SGLs we can fit
into the per-tracker memory.
For rdma, this is just set to 1 for now since nvme_rdma.c
does not support multiple SGEs yet. Once that support is
added, this will change to use MSDBD (Maximum SGL Data Block
Descriptors) instead from the controller identify data.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I34a4c546b5ff46918a296a73ed8cbcc6c9879d5a
Reviewed-on: https://review.gerrithub.io/372358
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add a new struct spdk_nvme_io_qpair_opts to allow the user to override
controller options on a per-I/O qpair basis.
Existing callers with qprio == 0 can be updated to:
... = spdk_nvme_ctrlr_alloc_io_qpair(ctrlr, NULL, 0);
Callers that need to specify a non-default qprio should be updated to:
struct spdk_nvme_io_qpair_opts opts;
spdk_nvme_ctrlr_get_default_io_qpair_opts(ctrlr, &opts, sizeof(opts));
opts.qprio = SPDK_NVME_QPRIO_...;
... = spdk_nvme_ctrlr_alloc_io_qpair(ctrlr, &opts, sizeof(opts));
Change-Id: I8ac3ea369535cfde759abbe75e1d974b6450a800
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/369676
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Support both SPDK_NVME_FW_COMMIT_REPLACE_IMG and SPDK_NVME_FW_COMMIT_REPLACE_AND_ENABLE_IMG.
Return code will specify if conventional reset is required.
For now, return error if subsystem reset is required.
Change-Id: I41a05675a210dd0bbf170517b32ee9e05da9a797
Signed-off-by: Isaac Otsiabah <iotsiabah@us.fujitsu.com>
Reviewed-on: https://review.gerrithub.io/367287
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I941a4cb5563cebb2e68b48d3a74b4b73af0e9657
Reviewed-on: https://review.gerrithub.io/365662
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Also provide an option in perf tool let users to
disable it.
Change-Id: If4952513d77cecaa4f9403fbea811d86916ee87c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/363311
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
- rename spdk_malloc_socket to spdk_dma_malloc_socket
- rename spdk_malloc to spdk_dma_malloc
- rename spdk_zmalloc to spdk_dma_zmalloc
- rename spdk_realloc to spdk_dma_realloc
- rename spdk_free to spdk_dma_free
Change-Id: I52a11b7a4243281f9c56f503e826fd7c4a1fd883
Signed-off-by: John Meneghini <johnm@netapp.com>
Reviewed-on: https://review.gerrithub.io/362604
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The VirtualBox emulated NVMe device will intermittently
hang on the first read/write command after an I/O
qpair has been allocated. The frequency of the hang
diminishes if a delay is added after allocating the I/O
qpair - until it disappears completely with a 100us delay.
So add a quirk to insert this delay.
Note - the 100us delay was tested by running
the hello_world example app 50000 times.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I237e31b1b8a1a1e28262851ae0a21cd7345f0f1a
Fixes a scan-build warning about using qpairs after they have been
freed.
Change-Id: I263eabd6b784acf540c66136965f7705ef110a78
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
A 100us is so small that applying the quirk to the specific
SSDs that require the delay is more trouble than it is worth.
So remove the quirk and always wait 100us before re-enabling
the NVMe SSD during initialization.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id6a8cc6e35d103fffdf135580301fc3e5b27e722
Queue aborts that would exceed the abort command limit
in software as a convenience for the user.
Change-Id: I8c1f0380984cc6c0cdb453db961939a7f571b336
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
It has been discovered that some devices require
a very small delay before writing CC.EN to 1 after
CSTS.RDY goes to 0.
Change-Id: I73d31726d17ebf5bbec7ee528e2f98fcd05234dd
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This has been reported for a number of different device
types. We suspect these devices are technically out of
spec, but they work with most other available NVMe
drivers on accident.
Change-Id: I529cfc03fc314cbab2a1cd40620bf1dd5b54182d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
These were repeated a few different places, so pull them into a common
header file.
Change-Id: Id807fa2cfec0de2e0363aeb081510fb801781985
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
For infinite timeout states, instead of printing UINT64_MAX as a
decimal number, interpret it as "no timeout" instead.
Change-Id: I579f5857f96286734940ab5f493261e60354c4fe
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This make sure the qpair failure could be started from upper level application.
Change-Id: I7e04fe36929cc634ddf0078db96fbc40afb38f8c
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Add a transport callback to return the maximum queue size, and enforce
it in the generic nvme_ctrlr layer.
This allows the user to tell what io_queue_size was actually selected by
the transport via the ctrlr_opts returned during attach_cb.
Change-Id: I8a51332cc01c6655e2a3a171bb92877fe48ea267
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This better describes what the field controls (it does not affect the
admin queue size).
Change-Id: I851ae46fb4ed0fce819af07ae235824e0fc817e6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use the standard quirk mechanism to specify which devices
need software assisted striping.
Change-Id: Id8156876a90b4caf9d687637e14c7ad4a66ceda6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The NVMe over Fabrics transports should already be setting this in the
initial admin queue Connect command, so setting it again is not useful.
The kernel NVMe over Fabrics target additionally has a bug in the Set
Features - Keep Alive Timeout handler (it is extracting the KATO value
from the wrong offset in the command), so this works around the kernel
bug by not sending the Set Features command at all.
Change-Id: I0d7f09b71fcea116acf8810c5880157bb9315a04
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
This version of multi-process support needs to have DPDK 16.11 builtin.
Change-Id: I3352944516f327800b4bd640347afc6127d82ed4
Signed-off-by: GangCao <gang.cao@intel.com>
Allow the host NQN to be overriden when connecting to NVMe over Fabrics
controllers.
Change-Id: I8fcf2e89ae7d9722677e834f76a8fe805c52f91b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
QEMU's virtual NVMe controller device does not support the AER Set
Feature, so ignore its failure and continue.
Change-Id: I8b5c217a3112edabb6f76ec3e5f4ef774981a1d7
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
The status.done flag polled by nvme_ctrlr_set_keep_alive_timeout()
was never initialized.
Change-Id: I323fae5f4ce12209a9699965ce07894bc3c6205a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Record the user-provided asynchronous event configuration set via Set
Features, and return it in Get Features.
This value is not actually used, since AER is not implemented yet in the
virtual controller model, but it at least implements the mandatory
Set/Get Features.
This allows the hack in the NVMe host code that ignored the Set Features
failure to be reverted.
Change-Id: I2ac639eb8b069ef8e87230a21fa77225f32aedde
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Considering the process can be terminated in the cases like ctrl+c,
kill command or memory fault, the ref is tracked in the per process
structure spdk_nvme_controller_process and whenever there is other
process attaches or detaches the controller, a scan will be issued
to cleanup those unexpectedly exited processes.
Change-Id: Ib4f974f567a865748d42da4ead49edd383dfc752
Signed-off-by: GangCao <gang.cao@intel.com>
Function pointers will not work for the DPDK multi-process model (they
can have different addresses in different processes), so define a
transport enum and dispatch functions that switch on the transport type
instead.
Change-Id: Ic16866786eba5e523ce533e56e7a5c92672eb2a5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use the new public PCI ID structure in the NVMe library to replace the
previously private struct pci_id.
Change-Id: I267d343917f60bdae949a824bc0fe67457cbbc0d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add a field to struct spdk_nvme_ctrlr_opts that allows the user to
specify a keep alive timeout, and add automatic submission of Keep Alive
commands to spdk_nvme_ctrlr_process_admin_completions().
Change-Id: Ib282299a571d8edc59c7933418751bc3a6c98b40
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make the quirks mechanism generic in preparation for quirks for devices
from other vendors.
Change-Id: Ic003b020a38f1b966021db30e3f2bce9cf6a1a0d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add a transport function to get the max data transfer size to break the
dependency on NVME_MAX_XFER_SIZE.
Change-Id: I846d12878bdd8b80903ca1b1b49b3bb8e2be98bb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move the PCIe-specific admin queue setup to nvme_pcie_ctrlr_enable.
Change-Id: Ic3f5625fa804f719040ba86b7fc3bf82fcc057c0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The value of CAP should not change during the lifetime of a controller,
so read it once during ctrlr_construct and store it in the ctrlr.
Change-Id: I089d4141b4e0c9aae6c53abf9bb0ef6577dabe0b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Rather than embedding adminq directly in the spdk_nvme_ctrlr structure,
change it to a pointer to a spdk_nvme_qpair. This is necessary to allow
the transport to extend the qpair structure.
Change-Id: I041685d5037088cf56d046fe99bf204edcfc57b1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This requires a couple of related changes:
- I/O queue IDs are now allocated by using a bit array of free queue IDs
instead of keeping an array of pre-initialized qpair structures.
- The "create I/O qpair" function has been split into two: one to create
the queue pair at startup, and one to reinitialize an existing qpair
structure after a reset.
Change-Id: I4ff3bf79b40130044428516f233b07c839d1b548
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make the transport ctrlr_construct callback responsible for allocating
its own controller.
Change-Id: I5102ee233df23e27349410ed063cde8bfdce4c67
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This allows users to swap their PCI library from
libpciaccess/dpdk to another mechanism using the standard
method for swapping out the env library.
Change-Id: Ib2248f8b43754a540de2ec01897e571f0302b667
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This patch also drops support for automatically unbinding
devices from the kernel - run scripts/setup.sh first.
Our generic pci interface is now hidden behind include/spdk/pci.h
and implemented in lib/util/pci.c. We no longer wrap the calls
in nvme_impl.h or ioat_impl.h. The implementation now only uses
DPDK and the libpciaccess dependency has been removed. If using
a version of DPDK earlier than 16.07, enumerating devices
by class code isn't available and only Intel SSDs will be
discovered. DPDK 16.07 adds enumeration by class code and all
NVMe devices will be correctly discovered.
Change-Id: I0e8bac36b5ca57df604a2b310c47342c67dc9f3c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Intel DC P3*** NVMe devices specify a desired stripe size, which was
used for splitting I/O. Not all devices, however, specify a desired
stripe size (such as the Intel DC D3*** line), and for only these
devices there was a logic mistake that overwrote the maximum I/O
size with a 2MB default. This patch corrects that error.
Change-Id: I94b72a3a3dd1dfa18bd638daf7e01a592eb6ed17
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
assert is part of the C standard library and is available
on any platform we'd consider porting to. Don't put a
wrapper around it.
Change-Id: I0acfdd6a8a269d6c37df38fb7ddf4f1227630223
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
pthreads are widely supported and are available on any
platform we currently foresee porting to. Use that API
instead of attempting to abstract it away to simplify
the code.
Change-Id: I822f9c10910020719e94cce6fca4e1600a2d9f2a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Since we bind the NVMe device to UIO driver to protect against native
NVMe driver, but for Admin queue, there are still INTx interrupts
exist, as all the completion for Admin queue will be processed in
user space, so we don't need INTx anymore.
Change-Id: Ife5b3e410ae95690ed0f3f9a2f2dfaf55a7797b5
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
This is intended to be used for examples/nvme/identify and similar
diagnostic utilities.
Change-Id: Ib2f941e9af7a3fb7555865ef253742e30ccad2b5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Previously, we used cap_lo and cap_hi to represent the 32-bit halves of
the full CAP register. However, it is simpler to keep them in a single
64-bit structure, and is no less efficient on 64-bit platforms.
Also name the NSSRS field from NVMe 1.2, which was previously reserved.
Change-Id: I1d5d9b0dccbb12373b4aed3db29c883881d43223
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Swap the order of checks in the failure check - if rc is not 0, addr may
be garbage.
Change-Id: I110710efd00397c777d59ac8b219ba3cc2156596
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The conventional rule for returning errno is negative, hence there is no
need to modify caller's code to adjust this NVMe library.
Signed-off-by: Minfei Huang <mnghuan@gmail.com>
Signed-off-by: Minfei Huang <minfei.hmf@alibaba-inc.com>
Previously, there was no way to determine what namespace ID was assigned
when a namespace was created via the NVMe library interface.
Also drop the incorrect comment about calling
spdk_nvme_ctrlr_process_admin_completions(), since
spdk_nvme_ctrlr_create_ns() checks the admin queue internally.
Change-Id: If90a6e9fc773aefa220ebbf6effc2d033c9f20cc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The user can determine whether submission queues will be placed in the
controller memory buffer by checking the controller options use_cmb_sqs
flag in the attach callback.
Change-Id: I8a925ef99a48665a0e2ffaa90d9ff2b79b90b2fa
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The D3700/D3600 series support Controller Memory Buffer(CMB) feature,
CMB is available for holding submission queues, for those controllers
which can support submission queues in CMB, user can set the option
whether to enable it or not.
Change-Id: I8b0dc9e28dd6f5bb01bee99a532087212c04e492
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
This patch add support for Intel specific log pages :
marketing description page.
Change-Id: I87bccb2af286279598c9dd3c870094b384a0d2f7
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
The NVMe specification recommends destroying all I/O submission and
completion queues before setting CC.SHN.
Change-Id: Iad71dd3fe03d897858034f3ca6ee02e0c55cc2b0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The NVMe specification recommends that orderly shutdown should just
write CC.SHN while the controller is still enabled rather than writing
CC.EN = 0 first.
This also allows removal of the now-unused nvme_ctrlr_disable() and
nvme_ctrlr_wait_for_ready() functions.
Change-Id: I4702ffda153f218ebb8ed92f0e36144b7ceded93
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This can happen if the controller is still resetting as the SPDK NVMe
driver takes control.
Change-Id: I263ae8f2e7b271e0448450557452a115c90c4fb6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This makes it easier to find the larger doc comments that produce separate
pages.
It also allows removing the lib/nvme directory from the Doxyfile, so
only the public API headers are used to generate documentation.
Change-Id: I8c46edb8067a91dda5b23fb0864efd3dd8aaeba5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Don't allow the user to request more than the valid maximum number of
I/O queues (65535) or 0 I/O queues, since this can't be encoded.
Change-Id: I2d6e0bba03476085842bad683b273cdf9d6e6d5e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
If the controller is failed, attempting to submit additional I/O is
futile - it will be immediately failed using the completion callback,
which can result in infinite recursion if the application code resubmits
I/Os on failure.
Instead, provide a way for request submission to indicate failure, and
use it to exit early if the controller is failed; this can only happen
when a reset failed (timed out).
If a request is submitted directly by the user when the controller has
failed, we can return an error code directly. For the case where I/O
was queued and is being resubmitted after a reset, we still need to call
the completion handler via _nvme_fail_request_ctrlr_failed().
Change-Id: I9e144328d524b25db2acf48e923b584746e8d0b6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Provide a new structure, spdk_nvme_ctrlr_opts, to let the user modify
the default controller initialization options during probe/attach.
Currently, only the number of queue pairs can be modified in this way;
other options will be added later.
Change-Id: Ie27b9429291d93a9353c0d820f0ad467d3b0e7cb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The previous method for registering I/O queues did not allow the user
to specify queue priority for weighted round robin arbitration, and it
limited the application to one queue per controller per thread.
Change the API to require explicit allocation of each queue for each
controller using the new function spdk_nvme_ctrlr_alloc_io_qpair().
Each function that submits a command on an I/O queue now takes an
explicit qpair parameter rather than implicitly using the thread-local
queue.
This also allows the application to allocate different numbers of
threads per controller; previously, the number of queues was capped at
the smallest value supported by any attached controller.
Weighted round robin arbitration is not supported yet; additional
changes to the controller startup process are required to enable
alternate arbitration methods.
Change-Id: Ia33be1050a6953bc5a3cca9284aefcd95b01116e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This field is write-only in the current code; the NVMe library does
not track timeouts on requests.
Change-Id: I50e53bb3c299bf16912c48be8aad3eec829154af
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
For those NVMe controllers which can support SGL feature in
firmware, we will use SGL for scattered payloads.
Change-Id: If688e6494ed62e8cba1d55fc6372c6e162cc09c3
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
nvme_spec.h already has a structure with the correct bitfields for the
CSTS register, so use it in struct spdk_nvme_registers.
Change-Id: Id0663aee2611fb5195f9012a3176799e32701bb0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This will be exposed in the public API. This rename is in a separate
commit to ease review.
Change-Id: I1b7fef36f85265db27935ac4d22ceef3c7282502
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Many of the internal controller initialization functions did not check
for allocation failure; add return codes and check them where
applicable.
Change-Id: Id1b33bb06fca84035369d8b7ecd4c36b8ba7134c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Prepare for qpair to be exposed as part of the public API.
Change-Id: Ia63e863e95554adceeade20c829f12fe346375d5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
When multiple NVMe controllers are being initialized during
spdk_nvme_probe(), we can overlap the hardware resets of all controllers
to improve startup time.
Rewrite the initialization sequence as a polling function,
nvme_ctrlr_process_init(), that maintains a per-controller state machine
to determine which initialization step is underway. Each step also has
a timeout to ensure the process will terminate if the hardware is hung.
Currently, only the hardware reset (toggling of CC.EN and waiting for
CSTS.RDY) is done in parallel; the rest of initialization is done
sequentially in nvme_ctrlr_start() as before. These steps could also be
parallelized in a similar framework if measurements indicate that they
take a significant amount of time.
Change-Id: I02ce5863f1b5c13ad65ccd8be571085528d98bd5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This check was dead code, since both places that called
nvme_ctrlr_wait_for_ready() could only ever have cc.en = 1.
Remove the original nvme_ctrlr_wait_for_ready() wrapper and rename
_nvme_ctrlr_wait_for_ready() without the underscore to replace it.
Change-Id: I6c9aa6a5b93606fb89d168c23f6735fcf3a84eaa
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
In nvme_ctrlr_hw_reset(), if we encounter a controller whose CC.EN bit
is already 0 (controller is disabled), the previous code would enable
the controller just so that it could be disabled to get a full reset
(transition from CC.EN = 1 to CC.EN = 0). However, it is a safe
assumption that if CC.EN is already 0, the controller has just been
reset, so we don't need to reset it again.
This saves a significant amount of time (2+ seconds per controller with
Intel SSD DC P3700) during initialization for devices that were disabled
on startup.
Change-Id: I552b1f0f185a84a8a0ce57a93b012d9d5fe096f3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
PCI_VENDOR_ID_INTEL -> SPDK_PCI_VID_INTEL
Also change the inclusion guard macro to be consistent with the other
SPDK headers.
Change-Id: I29346267172cb8c07cc4289eed4eca2d55e942d6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Rename all functions with a spdk_ prefix, and provide enough of an API
to avoid apps needing to #include <pciaccess.h>.
The opaque type used in the public API for a PCI device is now
struct spdk_pci_device *.
Change-Id: I1e7a09bbc5328c624bec8cf5c8a69ab0ea8e8254
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch adds Intel NVMe device list and overrides the
supported log pages according to the quirk list.
In particular, the READ_CMD_LATENCY and WRITE_CMD_LATENCY pages are
supported on Intel DC P3x00 devices despite not being listed in the
Intel vendor-specific log page directory.
Change-Id: I3a2b6a5fa142c6e9c93567df65e85980bd3c7cc0
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Also add a space between Copyright and (c).
The copyright year can be determined using git metadata.
Also remove the duplicated "All rights reserved." - every instance of
this line already has a corresponding "All rights reserved" immediately
below it, except for examples/ioat/kperf/kmod/dma_perf.c, where I have
added it manually.
Performed using this command:
git ls-files | xargs sed -i -e 's/Copyright(c) \(.*\) Intel Corporation. All rights reserved./Copyright (c) Intel Corporation./'
Change-Id: I3779f404966800709024eb1eb66a50068af2716c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
1 Add new API nvme_ctrlr_is_feature_supported().
2 Add unit test for new API.
Change-Id: Ia6d8710755c3b13984fca9d56700efe043be1402
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
This cleans up the I/O splitting code somewhat.
It also moves the SGL payload function pointers up into the hot cache
section of struct nvme_request without pushing the other important
members past the cacheline boundary (because payload is now a union).
Change-Id: I14a5c24f579d57bb84d845147d03aa53bb4bb209
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change nvme_ctrlr_is_log_page_supported() to match
nvme_ctrlr_cmd_get_log_page().
Change-Id: I4c8a1f11044b083f8f8990ef40a4f789fa3c24e3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
1 Add supported log pages data structure.
2 Bulid up supported log pages when NVME start.
3 Provide unified API for getting log pages.
3 Unit test suit optimization base on above modification.
Change-Id: I03cdb93f5c94e6897510d7f19bc7d9f4e70f9222
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
nvme_ctrlr_process_io_completions() and
nvme_ctrlr_process_admin_completions() now return the number of
completions processed.
This also adds the possibility of returning an error from the
process_*_completions functions (currently unused, but this at least
gets the API ready in case error conditions are added later).
Change-Id: I1b32ee4f2f3c1c474d646fa2d6b8b7bbb769785f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Previously, if nvme_allocate_request() failed in
nvme_ctrlr_construct_and_submit_aer(), there was no error checking, so a
NULL pointer would be dereferenced.
Add a return value to nvme_ctrlr_construct_and_submit_aer() so we can
signal failure to the caller. This can only really be reasonably
handled during initialization; when resubmitting a completed AER later,
there is nowhere to report failure, so the AER will just remain
unsubmitted.
Change-Id: I413eb6c21be01cd9a61e67f62f2d0b7170eabaa3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
nvme_qpair_submit_tracker() and nvme_qpair_manual_complete_request() are
only used from within nvme_qpair.c, so they can be static.
nvme_qpair_submit_tracker() is moved up to avoid needing a declaration
(no other code change).
nvme_ctrlr_hw_reset() is only used from within nvme_ctrlr.c, so it can
be static.
Change-Id: I9a7953d7baaec76e875dd535daf557ea24bef801
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
These delays are left over from early development. They are completely
unnecessary and not based on anything in the NVMe spec.
Startup time should be slightly improved (on the order of 100 ms in
normal cases).
Change-Id: I9068b1a0f42feabcfe656d68be91e05a56cc53a3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
nvme_ctrlr_process_io_completions() now takes a second parameter,
max_completions, to let the user limit the number of I/Os completed on
each poll.
If there are many I/Os waiting to be completed, the
nvme_ctrlr_process_io_completions() function could run for a long time
before returning control to the user, so the max_completions parameter
lets the user have more control of latency.
Change-Id: I3173059d94ec1cc5dbb636fc0ffd3dc09f3bfe4b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
It was previously uint32_t because it was accessed with special
uint32_t-only atomic read/write helper functions, but that was replaced
with normal variable accesses protected by a mutex.
Change-Id: I304a7ef8c723cb33fd08110b697f848823a163e7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is the only place that was using printf directly in the NVMe
library. Replace it with the official nvme_printf logging mechanism.
Change-Id: I689a7c0854b5e47eb357150f814e347cd44be79c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is calculated elsewhere now, so remove the comments around
nvme_qpair_construct calls.
Change-Id: I2dc4956a9e250b88e62038bc55cdd315940ad391
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
rc is reinitialized before it is ever read.
Change-Id: I9abbc256fb06022f3024b0aa3827be02a273f20a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
