Update the thread-local caches with new namespace data during each call
to spdk_nvmf_subsystem_remove_ns to handle the case where the user
requested to remove a namespace and then immediately add a different
one at the same namespace id. This makes the call asynchronous.
Change-Id: I8fd1968f7da78966386de18506b98d403b82d80e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/408220
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It actually returns the size of given queue,
so renamed it to get_queue_size to clean up
the API
Change-Id: I88551116b3dc19644764bba78b58444802a1d443
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/408174
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This reverts commit 498f9add11.
Making the subsystem removal asynchronous seems to be triggering an
intermittent failure in the NVMe AER test. Let's revert this for now
until we can diagnose the issue.
Change-Id: Ie1d598f0d5cce07e6869d87cd8388848caa78e46
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/408118
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Performing a subsystem update on each poll group after the addition or
removal of a namespace allows us to avoid the case where we pause a
subsystem, perform a removal, then an addition, resume the subsystem and
don't update the channel for that subsystem. This, however requires that
spdk_nvmf_subsystem_remove_ns be asynchronous.
Change-Id: I856572c02e6267f708da3a956accbbedae7260fb
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/407012
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The new construct_virtio_dev allow creating virtio SCSI and blk for both
PCI and user transports.
Change-Id: Ibd79c4fb75e3cbd993b46227d86e915c1b740a18
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/405419
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch introduces API to get some blobs capabilites:
bool spdk_blob_is_read_only(struct spdk_blob *blob);
bool spdk_blob_is_thin_provisioned(struct spdk_blob *blob);
to be used in upper level in the unified way.
Change-Id: I4411bb3f4dd0c64826ae16a66141b2911cbaab79
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/405022
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch fixes issue where user creates 2 lvols
with the same name simultaneously. New solution
builds list of names of lvols that are currently
being created and when new request comes it compares
name against existing lvols and lvols that are in the
process of creation.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I31b59ee13b5b9bae531866925dd409b143f08ad4
Reviewed-on: https://review.gerrithub.io/407408
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6627fd4253094548816c50bd97e13b22dc245df1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/407838
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Add "NoPci" to command line options as '-u' to avoid lost of
compatibility when JSON config file is supported.
Change-Id: I8ee429f4f66f8837da22ef8e259a1a011edd9257
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/407036
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add new optional bdev module interface function, init_complete, to notify bdev modules
when the bdev subsystem initialization is complete. Useful for virtual bdevs that require
notification that the set of initialization examine() calls is complete.
Change-Id: I0997fb5749d430f2fd3a40172ec8a1d5caa96964
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/407222
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4fa713afbb94ad0d0d61860f1bf9ab361eaa0dde
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/407360
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The 'sz' parameter to spdk_blob_resize() did not match between the
declaration and definition; it should be uint64_t, since it contains a
number of clusters.
Change-Id: I1cb386321cf85ac6c6220e1112b7223a967cd8cd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/407018
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change vbdev_lvol_resize() char name argument
to struct spdk_lvol lvol.
Add spdk_bdev_notify_blockcnt_change() after
succesfull spdk_lvol_resize().
Some code clean up and refactoring.
Change-Id: Idaa5bd4707e2479dfee50459a9844319b8c35d3a
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Reviewed-on: https://review.gerrithub.io/394521
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The bdev layer has three types of channels:
* bdev channels - one per bdev per thread
* module channels - one per bdev module per thread
* management channels - one per thread
Arrange this in a hierarchy where bdev channesl point to
module channels which point to management channels. Rely
on the channel mechanism to reference count and release
resources at the correct time.
Change-Id: I9341068f95ec2a3897c5a1d897895a4f5cc49299
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/406854
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Change-Id: Ibc43e3ee65d85a83d78d6e15457ae57992a1188a
Reviewed-on: https://review.gerrithub.io/395059
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Change-Id: Iad67be79d0ddd8c498950c4f7b1b3203e47a7a41
Reviewed-on: https://review.gerrithub.io/393936
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch adds new feature of blobstore.
New call creates a read-only snapshot of specified blob with provided options.
NOTE:
This patch doesn't cover recovery operation if snapshotting fails. This operation
will be implemented and added later.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Change-Id: I470ca13525638fa6df485d508b3adf71b6b69c0b
Reviewed-on: https://review.gerrithub.io/393935
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
To support resize operations during I/O, we will need
to send messages to each thread to quiesce I/O while
the resize operation is in progress to guard against
the cluster map memory changing while another thread
is accessing the cluster map.
Therefore, spdk_blob_resize needs to be asynchronous.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ida037334739b4b80a1dbc76e8f1c70bca8b73582
Reviewed-on: https://review.gerrithub.io/404616
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This was internally asynchronous already, but make it
explicitly asynchronous so other code can properly
wait on the operation to complete.
This fixes an intermittent CI crash.
Change-Id: I81c9b19673566047dcffa94796236ca9fd7fa7d0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/406226
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
IOAT module of copy engine requires config information in the .INI
config file. However dump config text is not supported yet.
Dump config text is legacy feature but this becomes a preparation
for the upcoming JSON config file.
Change-Id: I9b7349cac9c00ca3ce1d944a84cbc445a6f1aec4
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/405845
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
- Add support for multi page CNS 0x2
- Use CNS value 0x02 (SPDK_NVME_IDENTIFY_ACTIVE_NS_LIST)
to query active namespaces
- Add an API to iterate the active list
Change-Id: Iea524881fa6e3610a7d85ab02a2005a92fd633df
Signed-off-by: John Meneghini <johnm@netapp.com>
Reviewed-on: https://review.gerrithub.io/401957
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Updated to Linux 4.9.0. This introduces e.g.
VIRTIO_CONFIG_S_NEEDS_RESET flag that's required
for the next patch.
Change-Id: I562d0b9d9a3cb18fd484dda52fb447087062da47
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/405916
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was missing the "next reset slot" field, and the revisions were
defined as uint64_t, despite being ASCII strings.
Change-Id: I1f47dab14e0bce317afeefa499ce5e6b518b5c09
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/405824
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPKD base bdev might be part of multiple vbdevs. The same is true in
reverse direction. So consider folowing scenario:
bdev3 bdev4 bdev5
| | |
+-+--+ + +--+--+
/ \ | / \
bdev0 bdev1 bdev2
In current implementation bdev0/1/2 will apear as base base for
bdev3/4/5 which is obviously wrong.
This patch try to address this issue.
Change-Id: Ic99c13c8656ceb597aba7e41ccb2fa8090b4f13b
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/405104
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This isn't possible to implement using the current public API of DPDK,
and all of the in-tree users have been removed. Replace the
implementation with a stub that always returns NULL and mark it
deprecated so that any users have a release to update their code.
Change-Id: I4bc71f0a9fd518923484e862333b0c5e86883980
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/405710
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows us to remove most uses of spdk_pci_get_device(), which looks
up a PCI device structure from an arbitrary PCI address. This function
is problematic, since it uses internal DPDK data structures that aren't
meant to be part of the public API. There is still one use in the
codebase, which will be cleaned up in another patch.
Change-Id: Ia1fe1f799c240195f6871c1d92821074f884c4e6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/405707
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This makes use of the `--single-file-segments` DPDK param.
Change-Id: I21ddd955841748ea087c0d006875514be56f2107
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/401112
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function retrieves the UUID from a namespace, if available.
Change-Id: I98c55375948b92eaf429b41fb36dfea4e2b780a2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/404734
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
g_virtio_driver contained just a list of all
Virtio-SCSI devices. It's now being removed for
two reasons:
* it's backend-specific, doesn't fit a generic virtio lib
* it's difficult to ensure thread-safety for it
Virtio bdev modules will now manage their Virtio
devices by themselves. Virtio-SCSI has now an internal
device list. (And VirtioBlk module maps devices to
bdevs 1:1, so doesn't need any additional work here.)
Change-Id: I3bc68d76d6904df5c56f00fca7ab387871ecf88f
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/405179
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is not needed - we can easily get the number
of clusters from the underlying blob.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I94a716731bd1b8c4b333fe295bd5a963928b4330
Reviewed-on: https://review.gerrithub.io/404615
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Write information needed to recreate each bdev.
Change-Id: I3d2b24fd4aaa8b98ec558d864cc28b55a899452f
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/401217
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A new optional parameter is added to the NVMe-oF target namespace
options to set the Namespace UUID, which will be reported via the
Identify command Namespace Identification Descriptor list.
Change-Id: I53c6d6fa6475d3395d412d196b42000715e9ed81
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/400894
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Several of the 'bits' members were accidentally declared as unions
instead of structs.
Change-Id: Iaaacf79438899794581e3f69c8afb606a244eb1c
Fixes: 8d8f4ac304 ("nvme_spec: define Get/Set Feature structs")
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/404409
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
These will allow some simplification and cleanup of the NVMe-oF target
and other NVMe Set/Get Feature code.
Change-Id: I475e3ddbc6261a0033b604de1b6d25d4e2522ee5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403899
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Move the commonly-accessed fields to the front so they end up in the
same cache line where possible.
Also tweak the types of type, status, error.nvme.sct, error.nvme.sc,
error.scsi.sc, and error.scsi.sk (they can fit in 8 bits), and move the
Write Zeroes splitting variables into u.bdev.
This reduces sizeof(struct spdk_bdev_io) from 272 to 224, in addition to
the better cache line usage.
Change-Id: I4a91fd07f252e7add4a2db179df9c53268672198
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/404053
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Its possible for a net_framework to have initialization and finish
functions. This patch adds mechanism to register spdk_net_framework
and executes appropriate functions during subsystem start/finish.
Change-Id: I06d9cb6e98f843794296b833caa3c79735f06f12
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/403703
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This enables more clear division of spdk_sock_* functions
and spdk_posix_* ones.
Change-Id: I329eaf99de9390c8473b57427966dfe6af777abb
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/403700
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
We must hold bdev->mutex around all QoS channel manipulations, not just
channel_count; otherwise, there are race conditions.
Change-Id: I6183aef83f4d5789bded426a1832e3faaa688363
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403367
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will be used to track time used in pollers - each poller can now
indicate if it found any work to do or not.
For cases where it was obvious and the infrastructure was already in
place, existing pollers have been modified to return 0 or a positive
value to indicate whether work was done. Other pollers have been
modified to return -1 by default, indicating that the poller isn't
indicating anything about whether work was performed. This will allow
us to find un-annotated pollers easily in the future and fix them
incrementally.
Change-Id: Ifebfa56604a38434fac5c76ba7263267574ff199
Signed-off-by: Roman Sudarikov <roman.sudarikov@intel.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/391042
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There are two separate function pointer types declared in io_channel.h:
spdk_thread_fn for cross-thread messages, and spdk_poller_fn for
pollers. They currently have the same signature, but this will be
changing in an upcoming patch, so we need to fix the poller-related
functions to use the correct type (a few were using spdk_thread_fn by
mistake).
Change-Id: I0f0d8f1eea9905395125fc91e0355a49e65be99e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403598
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This better matches the style in the rest of SPDK.
No functional change - this is a pure find/replace of
spdk_bdev_module_if to spdk_bdev_module. Instances of this struct will
be renamed in another patch.
Change-Id: I3f6933c8a366e625fc3a1b6401aee26ee03ba69c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403368
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Modifies behavior of spdk_trace_init() such that it returns
on failure instead of terminating with exit().
Change-Id: I0ba321cddd233008a4b19bc592728230d89a11b2
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/403357
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is to add the basic support of QoS on bdev.
Including two major functionalities:
1. The QoS rate limiting algorithm:
a. New IO will be always queued first also under
the no memory condition
b. Start the QoS IO operation based on the limit
c. A poller started in each millisecond to reset
the rate limit and send new IOs down
d. The rate limit is based on the millisecond and
converted from user configurable IOsPerSecond
2. The Master Thread management:
a. Add a per bdev channel_count
b. Whenever QoS is enabled on bdev, if QoS bdev
channel is not created, create the QoS bdev
channel and assign the QoS thread
c. When new IOs coming from different channels
(threads), pass the IOs to the QoS bdev channel
through the thread event
d. When the IOs are completed from the QoS bdev
channel, pass the IOs back to its orignal
channel(thread)
e. Destroy the QoS bdev channel when it is the
last bdev channel for this bdev. Defer the
destruction if current thread is not QoS thread
Change-Id: Ie4444551d7c3c7de52f6513c9db926628796adb4
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/393136
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently SPDK_BDEV_MODULE_REGISTER() take many parameters. Extending it
(eg for incoming JSON configuration dump/load) is quite challenging and
error prone. As we are already here in next patches, rework this macro
to take one parameter - the pointer to struct spdk_bdev_module_if.
This patch also remove following macros:
SPDK_GET_BDEV_MODULE - this is not really needed, to find module outside
module translation unit use spdk_bdev_module_list_find()
SPDK_BDEV_MODULE_ASYNC_INIT and SPDK_BDEV_MODULE_ASYNC_FINI - replaced
by bool fields in spdk_bdev_module_if struct.
Change-Id: Ief88e023fbbaee7d5402c838dbecbdffd4dfb259
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/402883
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Don't do anything under the scene as adding/removing fields in struct
spdk_subsystem will require both macro change and C file changes.
Change-Id: I11bc0d5758edd7e0e0bd3f93e251d868cd9b1d2b
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/401850
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This allows vhost initialization to be fully handled in the event
framework subsystem.
Change-Id: Ic0ff11f3765cc553b7ca183027209fb6dd131364
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403226
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This lets us drop the basename parameter from spdk_vhost_startup(),
which is a step toward making vhost initialization happen as part of the
event subsystem instead of in the spdk_app_start() callback.
Change-Id: I4fe18c4c3f12b706e73ae74500be58f1582110fd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403225
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Modifies behavior of spdk_app_start() and spdk_app_parse_args()
such that they return on failure instead of terminating with
exit().
Change-Id: I82566417f04e1ae2e3ca60a00c72e664db26c9e4
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/401243
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Ief1f809308fbde2e696c60d3ce79c0720cb3e2ff
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Reviewed-on: https://review.gerrithub.io/398934
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In addition to the lvolstore uuid, add a per-lvol uuid for bdev
identification.
The lvol uuid is stored as an xattr for each lvol blob; if an lvol blob
without a uuid xattr is encountered, the lvol bdev will not report a
uuid for now (it will be set to all zeroes, which will be treated as
no uuid available by the generic bdev layer).
Change-Id: If00221383a12d62234fc085d56e257dd48053103
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402973
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add a generic way to get a UUID from a bdev.
For now, malloc and null bdevs generate random UUIDs, and no other bdev
types report a UUID.
Change-Id: Id9608c8c1b3ce3f1783e7f74bef96d44cd5d98a7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402177
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This lets us have a common place to put definitions like the length of
the UUID string, as well as abstract away some of the API warts in
libuuid (non-const values, no size checking for uuid_unparse, etc.).
Change-Id: I80607fcd21ce57fdbb8729442fbb721bc71ccb98
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402176
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Automatically detect more whitespace errors.
All existing cases are fixed; only whitespace change (verify with
diff -w) except for one comment style fixup in include/spdk/nvme.h.
Change-Id: If750e54b9c8e3421ea6feda5f20184a31431631e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402360
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
In 35a331a9 we added a new API that enables peer-2-peer (P2P) copies
between NVMe SSDs using Controller Memory Buffers (CMBs) that support
DMA operations. Add documentation for the API, the example application
(cmb_copy) and for P2P setup and operation.
Note that this new API is currently marked experimental.
Change-Id: Ifeedb86d5b72b3aa7a6803b87c4d4709c54108f8
Signed-off-by: Stephen Bates <sbates@raithlin.com>
Reviewed-on: https://review.gerrithub.io/401961
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Briefly tested with SPDK target via bdevio
through both vhost-user and QEMU's virtio-pci.
vhost-blk driver is not mentioned in any doc yet.
A virtio-blk bdev can be created as following:
`construct_virtio_user_blk_bdev /tmp/virtio.0 MyVirtioBlk0 --vq-count 16`
`construct_virtio_pci_blk_bdev 0000:01:00.0 MyVirtioBlk1`
or
```
[VirtioUser0]
Path /tmp/vhost.0
Type Blk
Queues 16
[VirtioPci]
Enable Yes
```
If `Type` field is not present, the VirtioUser
section will be parsed as a SCSI one, preserving
backward compatibility.
Change-Id: I3eae9f3b90570fbb0177df4951e5eed86fe07c66
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/393056
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
blobfs and lvol can now use this to automatically iterate
all existing blobs during spdk_bs_load. Changes to blobfs
and lvol will come in future patches.
This will also be used in some upcoming patches which need
to iterate through blobs during load to determine
snapshot/clone relationships.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic7c5fac4535ceaa926217a105dda532517e3e251
Reviewed-on: https://review.gerrithub.io/400177
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The md (metadata) thread is always the thread that
initialize/loaded the blobstore. Metadata operations may
only be performed from this thread. This patch adds some
more asserts in metadata functions that were previously
missed.
While here, also update some of the blobstore documentation
related to this.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5cafdb3ba402ceb6c3ccb6fdd9d36e7768f59f39
Reviewed-on: https://review.gerrithub.io/400885
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Unfortunatly not all bdevs produce its configuration in responce to
get_bdevs RPC call (eg nvme is producing tons of additional
informations). To not breake any existing scripts rename
'dump_config_json' to 'dump_info_json' instead of reworking those
callbacks. Next patches will introduce real 'dump_config_json' handlers
and API
Change-Id: If9c1a4ab864791b24a5f7d022e970cd65990ffc0
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/401216
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Three new RPC methods are added to allow modification of the NVMe-oF
subsystem allowed host whitelist at runtime:
- nvmf_subsystem_add_host
- nvmf_subsystem_remove_host
- nvmf_subsystem_allow_any_host
Change-Id: I5c98658f949dad013165c04497cca49867022ba0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/396063
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
These new names are much more clear and are aligned with other
functions such as spdk_blob_close.
Keep the old names around for now but deprecate them. We will
remove them in next release.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idc60fd0b19fa2a8b0247a1f5835774d342e721f9
Reviewed-on: https://review.gerrithub.io/400884
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is needed for an upcoming change which will
prevent metadata functions from being called on
threads other than the metadata thread. Without
this change, there was no way for this function
to return an error if it was called from the wrong
thread.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I67e591140194ff6ad250878168f6b166a1ff2282
Reviewed-on: https://review.gerrithub.io/400883
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Unify several similar functions checking for a buffer of all zero bytes
into the util library.
Change-Id: Idfbeffa22add34ac9ed1bd75ee27d6bd8b188940
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/400892
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_sock_group_impl represents the implementation of
a sock group for a given spdk_net_impl (posix, vpp, etc.)
This extra abstraction is required for enabling
spdk_sock_groups with sockets associated with different
spdk_net_impls.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7a380cc62c59bdac98996faf0387550c234165a0
Reviewed-on: https://review.gerrithub.io/400527
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is the framework for providing multiple implementations
of TCP sockets in a single application. This patch just
adds the framework - upcoming patches will convert the
existing POSIX implementation to use this framework.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I07951e71f344dfe7689c818a13d7e7113c826643
Reviewed-on: https://review.gerrithub.io/400334
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add optional parameters to namespace creation to let the user pick the
namespace globally unique identifier and EUI-64.
Change-Id: Ia3eebaf22f8a64733a00a83f90cafb4977c2d07a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/399531
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ice343afdc84c2a11cd9026d128a35f7a62aa7125
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Reviewed-on: https://review.gerrithub.io/398933
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This will allow more parameters to be added to
spdk_nvmf_subsystem_add_ns() without breaking API/ABI compatibility
later.
Change-Id: I6b2f58f1a2d5fcd4c754830cbd4713dc461a31fc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/399519
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I69167825f054b58daf37840212289d6b99c8bb6a
Reviewed-on: https://review.gerrithub.io/400163
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This silences the output of 'make clean' when there is nothing to do.
Change-Id: I5cd89b8a2934162c932fc7b4acc6585e8d1dd4f5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/399926
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It is not ideal to have to add this in a bunch of
different Makefiles, but further consolidation of
Makefiles is going to be a more arduous process.
With this change, rebuilding SPDK after no changes
will result in no output - all of the "Nothing to
be done for 'all'" messages have been removed. Note
that DPDK build output still remains - this can be
suppressed by either using an out-of-tree DPDK, or
using SKIP_DPDK_BUILD=1 when using the in-tree DPDK
submodule.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib1d45432f2baaa1d9c1b9509906ee1e77966d3ca
Reviewed-on: https://review.gerrithub.io/399918
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The cpuset API is const-aware, so we can safely
return const cpuset here. This will simplify
future usages of this function - for now it remains
unused.
Change-Id: If849ed49056a54035fb7a6eccde84121630f9974
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/399457
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For now, this provides common abstraction for Linux epoll
and FreeBSD kqueue. It also provides the basis for future
changes where alternate userspace TCP stacks have their own
mechanism for polling a group of descriptors.
While here, remove old epoll/kqueue code in iscsi/conn.c that
was commented out when the iSCSI idle connection code was
recently removed - we now have a real implementation of it
in sock.c so the original code is no longer needed as a
reference.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I664ae32a5ff4d37711b7f534149eb0eb35942335
Reviewed-on: https://review.gerrithub.io/398969
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I2a3c7a272dc08be5a5ecb4339622816482c4cbb0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Stephen Bates <sbates@raithlin.com>
Reviewed-on: https://review.gerrithub.io/397036
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This provides an abstraction layer around TCP
sockets. Previously we just used fd integers, but
we don't want to be tied to integers for alternative
userspace TCP stacks.
Future patches will do more work to enable multiple
implementations of this abstraction. For now, just
get the abstraction in place for POSIX sockets and
make all of the iSCSI changes associated with it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9a825e9e02eb6927c8702d205665c626f57b3771
Reviewed-on: https://review.gerrithub.io/398861
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
The socket-related code was already broken out into
lib/net/sock.c, so break out the header portions
from include/spdk/net.h into its own sock.h.
This prepares for some upcoming changes in how
TCP sockets are abstracted, to enable alternative
userspace TCP stack implementations to be used with
SPDK.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I40b162e72ea80c235b49f10b17c2085fcfb385d4
Reviewed-on: https://review.gerrithub.io/398851
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie76019c2d5a82e24f0ec93b0c046fdbeea8bd337
Reviewed-on: https://review.gerrithub.io/398850
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Change-Id: I53ffdd061ba068070f66a752780229ecfe53e737
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/398688
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: I04820b2da1e75d1e84d3a5f4a274a11c9f154b82
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/398758
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id1e2a7da0db319c4d43988ec4991462fc956dde2
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/398542
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This section was deprecated in the previous release, and its removal
was planned for v18.04.
Users may configure the RPC listen address via the command-line '-r'
parameter.
Change-Id: Ic714417b87d422492b8742852c16983eb61793c2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/398239
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Instead of:
* spdk_vhost_scsi_dev_remove(vdev)
* spdk_vhost_blk_dev_remove(vdev)
we now have
* spdk_vhost_dev_remove(vdev)
All the logic is already handled internally. This patch only
changes the API. Also, previous vhost_dev_construct()/remove()
functions have been renamed to vhost_dev_register()/unregister()
because that's what they really do.
Change-Id: I7dd0d77bc5b633bec075e0a71345ddbed62697b4
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/396574
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
We already have a vhost subsystem and have to do
its fini anyway, so let's remove application fini.
Technically, any SPDK app can use vhost library
and create vhost devices, so we need to delete them
on shutdown in all cases - in module fini.
Change-Id: I013b45b4e73fd19288b9c10bc995dc24894ecf35
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/396573
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
This change will allow reusing this structure for both internal
and external xattrs as well as in functions having optional xattr,
but missing other options (i.e. snapshot, clone implemented in next patches)
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ia6619a75efa0a100168a6f8317be274823af04ab
Reviewed-on: https://review.gerrithub.io/396417
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add the section of boot partition support.
Change-Id: I81357d657f1a55376ab98b5ffab511c6227e43c8
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/397033
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I08043509aa2acef184c819948691c3ef7ea20e1e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/397643
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: I8ff60b4e071ad864496c65b8cf63984bb915e4f0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/397637
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ib3507a9e69b210cbd173c88d166025d4579e0149
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/397602
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Blobstore default cluster size is currently 4MiB,
but default lvol cluster size overrides it to 1GiB.
Additionally add -c flag in lvol tests to set cluster
size for tests.
1GiB was fine without thin provisioning, but we do not
want to allocate and copy 1GiB of data for newly allocated
clusters on thin provisioned logical volumes.
Note that 4MiB is same as default for Linux LVM.
lvol test case 601 had to be modified to create a malloc
LUN less than size of default cluster size. This test is
supposed to fail - without the change here, creating the
lvolstore would work, but the script still considered it a
PASS. Defer fixing that to a separate patch - for now just
keep the same test process.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ic05defbf8e641f613f0ec74175a37bc25986e496
Reviewed-on: https://review.gerrithub.io/397562
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
After the renaming of json_internal.h to utf.h, it doesn't make sense
for utf.h to include spdk/json.h.
Move the #include "spdk/json.h" to the JSON library implementation
files and remove it from utf.h.
Change-Id: I36092524c9b982fd2e931faf1b7c5d1d6a6c80c0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/397603
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ie6a651d0238d09729e28d5456a84ba090faeb465
Reviewed-on: https://review.gerrithub.io/391568
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Modified include/spdk/bdev.h and include/spdk_internal/bdev.h
add data members to capture statistics information. Modified
lib/bdev/bdev.c to calculate read/write latency.
Change-Id: Idcd55dd2e88c4b308e016f16ced53720256c79e3
Signed-off-by: Isaac Otsiabah <iotsiabah@us.fujitsu.com>
Reviewed-on: https://review.gerrithub.io/390654
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add api and unit test functions for
change number of blocks for provided block device.
Change-Id: I55d67c99375cb88bdaa79ce1a36d4298223beddc
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Reviewed-on: https://review.gerrithub.io/390802
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fixes github issue #218.
This patch introduces spdk_cpuset object to store and manipulate
the set of individual CPUs. The main objective of this object is
to replace cpumask declared as uint64_t and extend the limitation
of supported CPUs (lcores) above 64 CPUs.
spdk_cpuset is always allocated dynamically and accessed by opaque
pointer, what makes it easier to extend in the future without
breaking API/ABI.
This patch also extends parsing function allowing to set cpumask
using a list of cpus e.g. "[0-4,10,12]" sets mask of 0,1,2,3,4,10,12
as well as hexadecimal string with and without "0x" prefix.
Change-Id: I475c3ba7fab629021a22e03176e57e400dd24a49
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/390794
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fixes the build with CONFIG_LTO=y.
Change-Id: I3acbdd16c5ff44f50747644c09ca7b0228c790cc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/396449
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently, there is no possibility to save read only blob to disk.
This patch modifies behaviour so that read only flags are applied after syncing blob.
This is analogy to resize, set xattr and remove xattr operations.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Iffed601c78cb83231bb20e7ef05b73847dc3c95a
Reviewed-on: https://review.gerrithub.io/394243
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Idadd4eb7574b005cce8b888b28c8c3b6993343a4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/395555
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_vbdev_unregister() is part of internal bdev API,
yet bdev module that uses spdk_vbdev_register() directly
will not be removed correctly when using delete_bdev RPC.
spdk_vbdev_unregister() is now consolidated with
spdk_bdev_unregister().
This comes up when deleting lvol bdev, as it does not use
spdk_bdev_part_* functions.
base_bdev->vbdevs entry was not removed for bdev that lvs
is created on.
Additionally patch expands test to create lvol bdev,
after removing it using delete_bdev RPC.
With ASAN enabled this would report accessing
already freed memory previously.
Change-Id: I9547e83862e2daa50355d56a1c9f453aaa6cfdb8
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/395711
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously vdev->name was being allocated/freed
separately in virtio_pci and virtio_user backends.
Now it's all done in generic virtio library and
cleans up some code.
Change-Id: I810e976d09781c0c9b25c6f7fd957a83aad6c7b8
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/394704
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Some upcoming changes will effectively render this moot
anyways by adding an epoll/kqueue descriptor to poll
on in all cases (not just connections that have been
idle for 5ms).
The epoll/kqueue code was just ifdef'd out instead
of removed - some of this code will be useful
and reusable with minimal changes in the upcoming
patches.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0c354390537e6369cb3c32e78a59c300dec6d098
Reviewed-on: https://review.gerrithub.io/395553
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
This is just the API introduction. See subsequent
patches for its RPC usage.
Change-Id: Iadb7c9bf6a56ab4330c9f2215c6006a2935d208d
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/394445
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When the state change is known to fail immediately, use
a return code instead of calling the callback.
Most of the callbacks didn't actually check for errors,
so this patch also doesn't check for errors on return
codes. That should be done in the future.
Change-Id: I67e03f93d7f53892473dfc073f4150e7e620cad2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/394281
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Removing an LUN from an existing iSCSI target is possible by
removing the corresponding BDEV. However adding an LUN to an
existing iSCSI target is not possible yet.
Add a new function spdk_iscsi_tgt_node_add_lun() and related
functions first toward supporting this function.
JSON-RPC for this operation will be submitted an another patch.
Informing the newly added LUN to the initiator is not included
in this patch. Hence this operation is possible only for any
inactive target.
Change-Id: I3a28f4d75a17126e49c9d12ce64c3ad68f231840
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/385180
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In current bdev_virtio_scsi PCI enumerate callback
implementation we rely on a global variable - a global
list of virtio devices. We do not need any opaque
context data inside this callback just yet. It will
be required to add virtio devices in runtime. See the
next patch for details.
Change-Id: I116cbd3bd633f56922eedcc7c07b8c0310e51d49
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/394444
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This avoids having to dereference the spdk_bdev_io's
channel in the spdk_bdev_free_io() path.
Cleaning up after hotplug events should ensure that
all associated bdev_ios have been freed (not just
completed) before the bdev channels have been freed,
but this patch gives us some more wiggle room in this
area.
Results in a small (1-2%) performance degradation on
a bdevperf microbenchmark, but should result in no
noticeable difference on any real world workload.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id8b88300fc53e8c0b83309a738a4c3bd2aeaff52
Reviewed-on: https://review.gerrithub.io/394399
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
There is no need to keep a lun name anymore - we always
use the bdev name as the lun name so it is not providing any
additional value. This also keeps us from associating
the same bdev with different LUNs on different iSCSI target
nodes or vhost-scsi controllers.
Side effect of this change is:
1) Use "bdev_name" across the APIs to make it more clear
what these names refer to.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3d42fde22087352ce1d5dc80178bd8c5cac8cb7c
Reviewed-on: https://review.gerrithub.io/390843
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Modifies spdk_env_init() and spdk_mem_map_init() such that
they return on failure instead of terminating with exit()
or abort().
Change-Id: I054c1d9b2e46516ff53d845328ab9547f54bdbc4
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/393987
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
This is more efficient and buf_link users don't
need the extra flexibility that TAILQ provides.
link could also be changed to an STAILQ, but its usage
is not in the performance path so not touching that
as part of this commit.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7df2cc24a3784add8370db859003783e92cbfc21
Reviewed-on: https://review.gerrithub.io/393834
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This only adds the option and metadata flags.
Actual functionality will be added in an upcoming commit
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I66015f48f34d4c7c64fce1831ebaed134098407c
Reviewed-on: https://review.gerrithub.io/390196
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Added tighter regulations to the NVMe-oF nqn checking to conform with
the nvme 1.3 spec. including, adding checks for valid nqn's in the case
of a generic uuid based nqn and checking for reverse domain name and
colon prefixed strings in a user specific nqn. Unit tests included.
Change-Id: I3ee4b269d0655ac9968699617e43e3297695c7ed
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/393265
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This requires exposing struct spdk_io_channel in the
public header - mark it as internal with Doxygen
comments to make it extra clear that applications
should not use the data structure directly.
This is a very hot function in the main I/O path,
so making this function inline has a significant
performance benefit. A bdevperf microbenchmark
using null bdevs shows a 11% improvement.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I70e30e184000705704bb004e8da1c7476a6aceeb
Reviewed-on: https://review.gerrithub.io/393824
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Retrieve LUN data directly from struct spdk_scsi_lun rather than copying
them into struct spdk_scsi_task, and access the LUN via the task->lun
pointer.
Change-Id: Id8745f116bc559fb2f9e58811c2b9781c8cbdae8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393709
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The existing description was written long ago and is
not even close to being valid now.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I758da93bfbffc2edb28b7d421b5f061cbd893a39
Reviewed-on: https://review.gerrithub.io/393692
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
The SCSI layer no longer needs to know about the parent/subtask
relationship maintained by iSCSI.
Change-Id: Ia6f7c5367c5b656bd7521ed1abb6d0f713a0500b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393697
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
This patch remove need for additional buffer when translating error code
to string.
Change-Id: Iaa60088b5c450581d3cdddbb425119b17d55a44b
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/386114
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also added vbdev_get_lvol_by_unique_id function.
Change-Id: I55a64df008c23c0fedb8a59ef67e2c356097e780
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Reviewed-on: https://review.gerrithub.io/392658
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Ic0cdcf088ebd5053f2e69ad2e607ee825d96fcb6
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Reviewed-on: https://review.gerrithub.io/390202
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Added aliases list to bdev struct.
Added 2 API calls to add and remove aliases.
Added test for adding and removing aliases.
Change-Id: I1815aec8c02cfa398b2d1de41577197315665fdc
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Reviewed-on: https://review.gerrithub.io/390200
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Distinguish between "not enough descriptors available"
and "iovcnt > queue depth".
This patch brings back I/O re-queueing for virtio bdev
module. It was temporarily disabled by 451de7e1 [1].
[1] 451de7e1: "virtio: switch to the new virtqueue API"
Change-Id: I4c4f6a6d9d91373ee647ea7cafd53ad999aa6aa2
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/393447
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Handle the possibility of the system strerror_r() returning an error
internally within spdk_strerror_r() so that callers don't need to check
the return value.
Change-Id: I0571c3f5999873575562d08a04d714716a7881ff
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393105
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is not used in the generic SCSI layer.
Fixes: 8eba104b73 ("iscsi: Fix the bug for hotplug when read IO is
running.")
Change-Id: Ie0715ea0ee5084eaf1321ba2f65f7bfa674c663a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393211
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ibffb43e39b44e5f443d3dfbfa5b5d7dcac3243ef
Reviewed-on: https://review.gerrithub.io/391182
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ic2c23d16360b26359c2a32920b89f2f3a21a2a9a
Reviewed-on: https://review.gerrithub.io/391191
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This allows the user to pause a subsystem, make some
modifications, and then resume it.
Change-Id: Ia18371023d8fc66e1797fda293a01b68c0a61c96
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/392422
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Make them usable for other Virtio drivers
(not just SCSI).
Change-Id: I7ae2c43f311fefd40e447c8b5accaf824d0e23de
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/393121
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently, each histogram range is hardcoded to
128 buckets (1ULL << 7), resulting in 58 ranges
(64 - 7 + 1) and a total size of 58 * 128 *
sizeof(uint64_t) = 59392 bytes.
To allow for more usage models in cases where this
size is prohibitive, enable the following changes:
1) specify number of buckets per range (in number of bits)
2) specify max datapoint value (in number of bits)
The latter can be useful for cases where datapoints
are never close to requiring all 64 bits - and allows
reducing the number of ranges. Any data points that
exceed the max will be tallied in the last bucket
in the last range.
Testing shows no performance disadvantage using the
dynamic approach.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5979bcdff6209faaa9dee293918ef2a78679bcd4
Reviewed-on: https://review.gerrithub.io/392707
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This simplifies some upcoming changes, where the
buckets will be a dynamically allocated array instead
of a static 2-dimensional array.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3854319385937be9f9ace4be7dd22423e24f25e3
Reviewed-on: https://review.gerrithub.io/392706
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
No functional change - this just reduces the diff for
some upcoming changes.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic185d32b38d5ccbc81cab49a6a38ebde0da71afd
Reviewed-on: https://review.gerrithub.io/392705
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Some systems provide older versions of this
header, which contain incomplete virtio_blk_config
struct - e.g. without num_queues field.
Change-Id: Ibf311cd300e808628fbd70f05db44a68ef8cae12
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/393092
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previously we used to manually set
vdev->max_queues and called virtio_dev_restart
to go through all virtio init states, negotiate
features and allocate virtqueues. This is,
however, insufficient for Virtio-Blk, where we
e.g. need to check against negotiated multiqueue
flag before deciding how many queues we can use
(reading num_queues field from device config is
forbidden unless VIRTIO_BLK_F_MQ is negotiated).
This patch refactors queue-num related code
and also removes various restrictions. If device
supports less queues than requested, a warning
will be printed during initialization, but
the device will now continue to init normally.
The queue-num negotiation for virtio-user should
be eventually moved to upper layers, but that is
not necessary for now.
Change-Id: I418b56fa62c17b547243422ea077f0d76555bd13
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/393087
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Exported lib/bdev/rte_virtio as a separate
library not dependent on bdev.
Virtio is now accessible via spdk_internal/virtio.h.
The header is marked `internal`, as it's
not meant to be used by end users. It's
not handy to handle all backend-specific
(e.g. Virtio-SCSI) logic in a user code.
For now the Virtio interface is publicly
exposed only via bdev_virtio module. We
might want to consider adding a separate,
public Virtio-SCSI library in the future.
Note: this patch doesn't do any changes
to the virtio code. Everything is
moved 1:1.
Change-Id: I805e5d12d265d82b0bc5784c89fbadb81abdb278
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/388166
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also use this function in iscsi/conn.c
Change-Id: I25f6da175eddb12c4ac2624d695c2c43c871d8e8
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/392713
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1370df82b259afd9f3fcc2c37409e20fd35dff5f
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/392497
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Instead of requiring each bdev module to track its own bdevs and clean
them up during its fini callback, we can walk the list of registered bdevs
during spdk_bdev_finish() and call spdk_bdev_unregister() on each one of
them before cleaning up the bdev modules.
Change-Id: I01816707c9100f66f542bfd73b90bcb0e0fb0c0c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389878
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This prepares for some upcoming changes which will
add a per-thread bdev_io cache.
While here, remove spdk_bdev_get_io() from the
internal bdev API. This function is not meant
to be called outside of bdev.c.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9f764a88a079fac936931c46d615999454013732
Reviewed-on: https://review.gerrithub.io/392529
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I7174f1799361b8337ff5590b90ad6a0564ca8e9b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/391899
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Iba33c55f129c60fad2d58f5254dec5c54ed56805
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Reviewed-on: https://review.gerrithub.io/388217
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Similar to previous change, the ** paradigm is a bit
problematic for asynchronous routines that could fail.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ife7748280482356c4c51a796817b71cd7bc7e479
Reviewed-on: https://review.gerrithub.io/391483
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Using the ** paradigm is a bit problematic for asynchronous
routines that could fail. Currently we were inconsistent in
that some error paths would zero the pointer while others
did not. So make this just a plain pointer, which simplifies
the API and its implementation.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I67147931c6e8350896a4505022a6a314655de3d3
Reviewed-on: https://review.gerrithub.io/391482
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
While iterating, allow the user to perform asynchronous
operations. To continue iteration, the user is expected
to call spdk_for_each_channel_continue.
Change-Id: Ifd7d03d5fbf17cf13843704274b036d49ca0484a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/391309
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Also used it in parsing `-m` SPDK app param,
meaning that it can now accept numbers
followed by a binary prefix - like 512M or 2G.
Change-Id: If458dc08429237f2cb3f3f661bcaf382468df0f0
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/391670
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
As part of clarifying the API and preparing for some
future changes, rename the following functions:
spdk_bs_md_create_blob => spdk_bs_create_blob
spdk_bs_md_open_blob => spdk_bs_open_blob
spdk_bs_md_delete_blob => spdk_bs_delete_blob
spdk_bs_md_iter_first => spdk_bs_iter_first
spdk_bs_md_iter_next => spdk_bs_iter_next
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I86bf792717b68379484a6108396bb891fe1c221e
Reviewed-on: https://review.gerrithub.io/391031
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This function was a nop and is not needed.
lvol was calling this function when an lvol bdev
gets a FLUSH I/O, but that is not needed either. So
lvol will now report it does not support flush.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I92df83243f7ebce81c69040a8874891dc2ffc961
Reviewed-on: https://review.gerrithub.io/391023
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The implementations in blobstore.c still remain for now, but
those will be removed after some upcoming changes which will
eliminate a global md thread and instead allow caller to
specify an I/O channel for each blobstore level API call.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idf800a7f061ffc9c42488951262e28e660871356
Reviewed-on: https://review.gerrithub.io/391020
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Replace the single call to spdk_scsi_dev_print() with a reimplementation
using public SCSI API functions, and also using the SPDK logging
framework instead of printf().
Change-Id: Ifa455f9e6a4a07a35d5dec311a61e9a8afaa0227
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/391320
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add functions to iterate the list of subsystems for a given
target.
Change-Id: Id3831f656033092224168b353788ae87238bf800
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/388294
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now rely entirely on the user to create and poll
the poll groups.
Change-Id: I66baaa2d0f493390a055a32e6c902f5e2f574534
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/385954
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8b70d25d1b245bdb3f6fcd79599a2907a6d5bddc
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/391143
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Purpose: To get the name of a mempool
Change-Id: Ic23f93a03db9bcef54808dfd350b1403a47c21d7
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/390937
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Added new keyword 'Target' that will replace 'Dev'.
'Dev' is still usable, but deprecated and will be removed.
Change-Id: Iafd6114ef2cc5b2f8d58497e9fb454a3a237ed16
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Reviewed-on: https://review.gerrithub.io/388568
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Update all the header files in include/spdk to include
extern "C" declarations.
Change-Id: I43299f68e962d0df18c1b23fbbaa19bc924fcb96
Signed-off-by: Dave Boutcher <dboutcher@ocient.com>
Reviewed-on: https://review.gerrithub.io/390896
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add g_spdk_nbd to record multi-nbd-disk in the
future. nbd subsystem will be used to init and
finish g_spdk_nbd and its linked spdk_nbd_disk.
Change-Id: Ia67caa57b9920d0080f8b2fa1c8e87615803e5fe
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/390097
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
nbd poller is put into spdk_nbd_disk.
nbd test app no longer needs to process spdk_bdev.
This enables upcomming patches to move nbd test app
functionality to SPDK library.
Change-Id: I1b563a49dc9488e8dcc20706be82b17fdbd07ff1
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/390093
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Disambiguate the log components from the trace functionality
(include/spdk/trace.h).
The internal spdk_trace_flag structure and related functions will be
renamed in a later commit - this is just a find and replace on
SPDK_TRACE_* and SPDK_LOG_REGISTER_TRACE_FLAG().
Change-Id: I617bd5a9fbe35ffb44ae6020b292658c094a0ad6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376421
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I8b77f8aa8e20a277d0a5e53688d7cef8674d6244
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/390497
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The function just needs to zero out metadata so that the
blobstore is effectively destroyed. If the user wants
to unmap the rest of the disk after the blobstore is
destroyed, they are free to do so. On future initializations
of blobstores the code will do the unmapping, so performance
is not impacted.
While here, implement the zeroing using the new
write_zeroes functionality instead of allocating a buffer
full of zeroes.
Change-Id: I7f18be0fd5e13a48b171ab3f4d5f5e12876023bc
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/390307
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I9afa07b5dae99955ba87d7c8130b2ce6f04e7941
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/389641
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
These aren't used quite yet, but they'll need to be called
by the user's application.
Change-Id: Id1fc44859350451a3e224f725add60d3a878d077
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/389639
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Gather all of the type declarations at the top for
clarity.
Change-Id: I447fb9b1ad43fe91ef3fffcbb4e109c56a0b90eb
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/389638
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Tested with bdevio, hardcoded TUR response to test the start/stop
unit code
Change-Id: I5038e6bcce9fcd423f1b93c8bb8b466ee3817654
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/387183
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This correctly puts all of the I/O channels on the right
thread during shutdown.
Change-Id: I432c8cb981a68b40639f8876dae42597a9e6a85f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/389637
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
All SPDK public API headers should include spdk/stdinc.h first.
Additionally, the other headers included in lvol.h aren't needed;
spdk/queue.h was unused, and spdk/blob.h can be replaced with a forward
declaration of struct spdk_bs_dev.
Change-Id: I89fad764efbb4c088ce325392f8237c1a869a895
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389895
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The vbdev_* functions that were declared in lvol.h are all internal to
the lvol vbdev implementation; they don't need to be in the public
header.
vbdev_get_lvs_bdev_by_lvs() is moved to the top of the file so it
doesn't need a forward declaration (no code change).
Change-Id: I98282d3cb0008da5c5b5059eee335219dc929f1c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389894
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Modify the vbdev_get_lvol_store_by_uuid() API function to take the UUID
as a string instead of a uuid_t, since this simplifies the calling code.
This also allows us to remove #include <uuid/uuid.h> from the public
API, giving us the freedom to change the underlying UUID implementation
later if necessary without breaking API.
Change-Id: Ib360281f384f95722c5ab64e75dcf3603f826e4c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389893
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The smp variants of memory barriers can
be used in cases where the sequential
order of loads/stores is required just
between CPU cores.
Change-Id: Ifbd187338bb441d4563672fa2f2afbe666607d76
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/388765
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change the return type of spdk_bdev_register related
functions and try to handle the duplicated name
issue.
Change-Id: I23af11583cf2050579d1624508306a35394bffde
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/388178
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Use the new one from io_channel.h.
Change-Id: I7bf6729caf6eeebcb58450a36119601957ad5da4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/388290
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This function will send a message to each allocated
thread asynchronously, then call a callback on
the originating thread.
Change-Id: I3ebe7c6c5b460a944a32487d1091b601a482a256
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/388041
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This simplifies the public API and requirements for
user applications.
Change-Id: Ibb0d25a7838a0fa683f39e79cb4fef78adf6aee8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/388040
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Make this generic and not directly dependent on
the event framework. That way our libraries can
register pollers without adding a dependency.
Change-Id: I7ad7a7ddc131596ca1791a7b0f43dabfda050f5f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/387690
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
For now, this only installs libraries and headers; we will need to
consider which binaries should be installed and what they should be
named before we add them to the install rule.
Change-Id: I78dc8631f793d0df88cd884b0ac66406df9e4427
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/387637
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: If89275acfb1560982e332148a99ed3c83f8cb34f
Reviewed-on: https://review.gerrithub.io/387609
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_bdev_nvme_io_passthru_md() is verified on QEMU NVMe
and will be verified on Cosmos mini OpenSSD.
Change-Id: Ib759b6b6095deaa4ae7cf746f3a241f678295605
Signed-off-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-on: https://review.gerrithub.io/387114
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change the return type of spdk_channel_msg from
void to int. If this msg executed in a failure,
we do not need continue sending the message to other
threads, we can just tell the original thread, and
let the orgiginal thread call the spdk_channel_for_each_cpl
call back.
Thus we can track the qpair creation/destroy case for bdev
reset in nvme bdev module;
Change-Id: Ide9dffd1f84a29fcf61d8339a9ece2a0245d968d
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/387284
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8ea8c59a0c67176c0c0c39abf807afad61ff3828
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/387689
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I864cd8a6c206dfbe62fcb3f72275c1ae51aa4ed7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/387688
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is the inverse operation of spdk_io_channel_get_ctx.
Change-Id: Ica6593240dfb05cb53dc7ec910bc0a78270e81c0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/387679
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Ibe31b961fec36644cf64716c512429d68e873e88
Signed-off-by: Ed rodriguez <edwinr@netapp.com>
Reviewed-on: https://review.gerrithub.io/386170
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2524b7881885a0784492a8189bf22a0b8c92d470
Signed-off-by: Ed rodriguez <edwinr@netapp.com>
Reviewed-on: https://review.gerrithub.io/386169
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
RPC is a default feature required for almost all usages,
so enable RPC by default, but with a UNIX domain socket
for security reasons.
-r can now be used from the command line to specify
an alternative RPC listen address from the default
/var/tmp/spdk.sock.
Remove the Enable parameter from the Rpc config section
but still allow specifying an alternative listen address
using the Listen parameter as an alternative to the
command line option. This keeps backward compatibility
for this release for anyone using the configuration file
still.
Remove the Rpc sections from all configuration files
that were using them, except for those that specified
alternate TCP ports for multi-process test cases. We
can fix these later to use an alternate UNIX domain
socket and to use the command line instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ife0d03fcab638c67b659f1eb85348ddc2b55c4c4
Reviewed-on: https://review.gerrithub.io/386561
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is a helper function that eliminates a lot of
duplicated code in our target applications, specifically
around common command line argument parsing and usage
messages. This patch only moves the iscsi, nvmf and
vhost targets to use this function, but there are other
test/example applications that could also take advantage
of it to reduce duplicated code and improve consistency.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1903de3daed90ac6282b006a8283b9df07ce37e9
Reviewed-on: https://review.gerrithub.io/386542
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Add code to implement the write memory barrier and read/write memory
barrier for ARM 64 platforms.
Change-Id: I8b63db25ba1f70a729874ca143db13501d976676
Signed-off-by: Barry Spinney <spinney@mellanox.com>
Reviewed-on: https://review.gerrithub.io/386534
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Show total accessible clusters when listing lvol stores
instead of total blocks. This is more readable for user.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I22a14f626816769cf2f494ae30cfd8ee63897771
Reviewed-on: https://review.gerrithub.io/385634
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
At the moment there was no way to a user of blobstore api to know,
how many clusters are availible to him. Total_clusters describes
number of clusters for metadata and user data.
New field added total_data_clusters, keeping number of clusters
that can be used to create blobs - meaning just user data.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I60555217644557410844f74628375a6b46fd2ac7
Reviewed-on: https://review.gerrithub.io/385633
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This allows us to remove some duplicated code from our
main target applications.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I15b517fd2b58ce682660b4f6ba0b8412beda053b
Reviewed-on: https://review.gerrithub.io/385714
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
RPC is core functionality for SPDK applications and should always
be initialized last (after all subsystems have been initialized).
So make RPC a first class citizen and integrate it with the
app framework directly instead of making it an "optional" subsystem.
Then we initializing it after all subsystems have completed
initialization, and tear it down before tearing down subsystems.
We can also do some other cleanup while here - for example, reactors
are already started when spdk_rpc_initialize() is called, so remove
the extra event that was added during initialization since this is no
longer needed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4cc63586a6d55be68786629a2176c61a88979267
Reviewed-on: https://review.gerrithub.io/385914
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch add the data structures related with virtualization of
nvme 1.3 spec.
Change-Id: I8bc2ca7ce22517317b559f2445a8a5a1e30cf156
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/386357
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a request from an implementer of an alternate (non-DPDK) env
implementation; it will only have meaning for the specific env
implementaiton, but it can be used for passing env-specific arguments
through the generic spdk_env_init() call.
Change-Id: I37f70dd3b961f08c3bc2f25f3d12cc02bd3d6699
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382055
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The end goal is to have the application create one poll group per core.
Then each poll group will have a single CQ per network device and an I/O
channel per back-end storage device to poll.
This is just the first step toward that, which is to wire up the
creation of the per-core poll groups in the application.
Note that the app poll groups don't do anything yet. We'll need
additional library API changes to make the library use the existing poll
groups, rather than creating a new poll group per subsystem as we do
right now.
Change-Id: I2d4e2a5e5aa354d37714750f1d5b1d1e4ab9edce
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/381887
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Prepare for the addition of more architectures by replacing the #else
case with an explicit x86 check, and add a final #else to trigger a
compile-time error if the architecture is not supported.
This adds a empty #defines of spdk_wmb() and spdk_mb() in the #else
error case so that they still show up in the generated Doxygen output.
Change-Id: Ia9e9de1648694013de1cd8a2e3edfa9b1166401c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/386345
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows users of this interface to then close the fd
when they want to release the claim.
This prepares for calling spdk_pci_device_claim() in the
nvme driver to cover not just the bdev_nvme driver but all
of our nvme example and test applications as well. We'll
want the fd returned so that we can properly close it during
detach (including hotplug) use cases.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8b149cc4e778ba31c0e7045b858c8a1561b6b7af
Reviewed-on: https://review.gerrithub.io/385523
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Id3ccec9f5d77d4125b9ef70e286caac83a0ac2fe
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/385159
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: I3842b654167345326979177ffdf3d10a33fae70c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/385145
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ic6770371d9d62cbdd40ae0612eb4f7dceccd507f
Reviewed-on: https://review.gerrithub.io/383771
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1df83cbd6414a1bb8f54328c735950b9476e323b
Reviewed-on: https://review.gerrithub.io/384105
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Virtio spec say that any IRQ requests are only hints. So try to limit
number of interrupts generated by vhost by defining minimum interval
between sending IRQ. Coalescing is disabled by default. Can be enabled
using RPC command 'set_vhost_controller_coalescing'.
Change-Id: I9b96014d004ea0ea022b4498c6b47d30d867091a
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/378130
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
First this change moves spdk_subsystem_fini() to trigger on
spdk_app_stop(). This ensures that spdk_subsystem_fini() is called
before reactors are stopped in spdk_reactors_stop().
Finish paths for subsystems, bdevs and copy engine is now
asynchronous.
Each of those three mentioned have to make sure they are
asynchronous as well.
Only bdev that currently has requirement for asynchronous finish
are logical volume.
Thus the change in vbdev_lvol.c making it move to next bdev module
only after all lvol stores were unloaded.
Fio_plugin finish of bdev and copy_engine was removed for now.
Next patch in series adds it back with async support.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I80ee2d084f3d82c50bf1329e08996604ae61b1b3
Reviewed-on: https://review.gerrithub.io/381536
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch adds new API to remove logical volume store
from device it is on. It is only used from RPC, when
user explicitly requests. It allows to use the device to
use as any other bdev.
vbdev_lvs_unload() is now only called from hotremove and
during application shutdown. Which makes it possible to
load it again during application start up.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If6452ecc3fff99237d1704ff7cd8de4d7133221d
Reviewed-on: https://review.gerrithub.io/382021
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There is a scenario where we can try do unload or remove
lvol store while lvol present on that lvol store is being
closed or destroyed.
Scenario:
1. send delete_bdev rpc command
2. command returns before lvol is actually closed/destroyed
(does not wait for callback)
3. send destroy_lvol_store rpc command
4. lvs is destroyed before lvol is destroyed
5. lvol destroy callback is called on destroeyd lvol store
Aboive scenario can be reproduced using:
spdk/test/vhost/spdk_vhost.sh --integrity-lvol-scsi
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ie715279195bd4b1145cf05d4f5a8477b4fac87f7
Reviewed-on: https://review.gerrithub.io/383595
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently deleting bdev does not support asynchronous delete
operations. Because of that results are returned before device
is actually deleted and some operation can be peformed on that
device after removal of this device started.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I305c302d8abd5d7c2c0f947fca70c58396872132
Reviewed-on: https://review.gerrithub.io/383732
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I566a4d277ac1595fa7b4d630df52301a9abeec49
Reviewed-on: https://review.gerrithub.io/381629
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add a name to each lvol which is persisted as a blob
xattr. lvol names must be unique within its
lvolstore.
While here, fix a few lvol_ut issues that were caught
as part of testing the lvol unique names. Also fix
a couple of tests that registered the wrong string
name with CUnit.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6d24d241e8f52158d14886f928d41823bbc93fa9
Reviewed-on: https://review.gerrithub.io/383567
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
There are some upcoming changes which will deprecate
the old lvsuuid_blobid name in favor of an
lvs_name/lvol_name name where these names are
user-specified.
In preparation for this change, rename the previous
lvol->name to lvol->old_name. This will allow us
to add a new lvol->name but keep the original
old_name during the transition.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I10deb219097fa8726c146ab2427ee7373933b97d
Reviewed-on: https://review.gerrithub.io/383534
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Each lvolstore now has a unique name which is persisted to
metadata. Eventually this will provide a friendlier
way to reference logical volumes, in the form
lvolstore_name/lvol_name.
This patch only covers the unique lvolstore name. An
lvolstore may not be created nor loaded if its name
conflicts with an already loaded blobstore.
Currently there is no way to rename an lvolstore to
resolve a conflict. This will be coming in the future.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I842f13b79776e5b8f81e56de10778c35328e8cd3
Reviewed-on: https://review.gerrithub.io/383533
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
If we don't delete the super blob, this blob structure
will leak.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I56d0ca4884846aee0c7865f9c600d6c43811373c
Reviewed-on: https://review.gerrithub.io/383311
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
This will be used in a future patch to ensure we do not
allow creating or loading an lvolstore with a names that
matches an already opened lvolstore.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I37e8786f91cd578dd36fbec99ca23609419fc8f8
Reviewed-on: https://review.gerrithub.io/383012
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch introduces lvol store and lvols parameters saving
on persistent memories and loading it from saved data on app start.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ia63f0cf3d6365d59f31c5f0a1724636bfe73b5b8
Reviewed-on: https://review.gerrithub.io/375764
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Unmap does not guarantee that erased blocks will return all zeroes.
using write_zeroes when unmapping metadata gives the
desired behavior for a blob.
Only metadata pages will be cleared with write_zeroes in this patch;
blob data clusters will still call unmap. This behavior may be made
configurable in a later patch (to allow the user to request zeroing of
clusters rather than just unmapping).
Change-Id: I1b210abac110867ce703bcfdeb634eb45aa9d5c9
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/372004
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
if write_zeroes is not supported by the block device, we can get the
same behavior by simply writing a buffer full of zeroes to the blocks
we want to erase. I also incorporate splitting into the bdev layer to
accomodate large i/o.
Change-Id: I8fa1bfaaf22d7bfc6e3afb6e89d22fa9f7767e55
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/373829
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This goes along with previous patch in series.
Adding functionality to remove logical volume store from
device.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6338a35ed02838498a3cd9bb2dddd25803e65f79
Reviewed-on: https://review.gerrithub.io/382020
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Currently exposed API allows to load/unload and to
initialize blobstore on a device.
A spdk_bs_destroy() call is added in order to reach
functional parity with spdk_bs_init(). It was not
possible to remove blobstore from device from within
SPDK previously.
spdk_bs_destroy() takes blobstore pointer as argument
(instead of bs_dev), because blobstore has to be already
loaded to destroy it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I2c493a4407868fcf08fd1766a19fc8463f634ef5
Reviewed-on: https://review.gerrithub.io/382019
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I3a86f28056e67b3c237441fb1048ca6ccd081ae7
Reviewed-on: https://review.gerrithub.io/383252
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Close and destroy lvol functions should support callback
functions so that they can be processed sequentially
and also give user result.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I9e87fb281916c65c17b2b7e54e91228844962048
Reviewed-on: https://review.gerrithub.io/383230
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Some future patches will require specifying an lvol_store
name when calling spdk_lvs_init(). This means that passing
NULL for spdk_lvs_opts will no longer be an option. So
add an spdk_lvs_opts_init() (similar to spdk_bs_opts_init)
which will initialize a default value for the cluster size.
While here, prepend an underscore to spdk_setup_lvs_opts, since
this function is not part of the public SPDK API.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I155bcfd0c396017304bb3d58b7511ada71dade17
Reviewed-on: https://review.gerrithub.io/383030
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Always start bdev pollers on the calling core.
This removes the lcore concept from the bdev poller abstraction and
simplifies the job of spdk_bdev_initialize() callers providing their own
poller and event implementations.
All callers except the NVMe bdev hotplug poller already used the current
core as the parameter. The NVMe HotplugPollCore option was undocumented
and unused in any of the tests or example configuration files, so it
should be safe to remove.
Change-Id: I93b466e1e58901b8785c40cbe296fa46c157850f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382857
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added a wrapper for rte_ring_count().
Change-Id: Ia12fde3f250604a0f801309ed1c4706a311e7896
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382919
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Previously, spdk_trace_dump() took a const uint8_t * as the buffer, but
it is more flexible to allow any type to be passed (we are just going to
interpret it as an array of bytes anyway).
Change-Id: I1750316928cd330ed461bb513ff8af37e0170ef3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382854
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is required for virtio-initiator,
where multiple io_channels have to
share the same virtio queue. A single
poller will receive responses from
a virtio queue and send the completions
to the thread that submitted bdev_io.
Change-Id: I951c7655aaa17d41a680d437661afff27d2c3077
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382200
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Introducing bstype as a way to identify and verify
blobstore type.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I50267b5408625be10fe0c146ae329016d5509b4a
Reviewed-on: https://review.gerrithub.io/380476
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The SCSI spec defines two separate fields within the first byte of
the Inquiry data. Define them as bitfields and add enum values for the
peripheral qualifier field.
Change-Id: Ibbb158338da199fc1b67b04c52ec91633577c571
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382713
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Previously two spdk_events were allocated in spdk_app_start().
Now app allocated spdk_event for function to be called after
initialization is complete. Meanwhile subsystem allocates
its own spdk_event.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I4822f76d30cc2f7b95a86a4ffbfc61b80c0a903e
Reviewed-on: https://review.gerrithub.io/382673
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I68a56666d30a550de4a2dc5a66fb669dfbad12dd
Reviewed-on: https://review.gerrithub.io/379659
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Current implementation supports only adding port to scsi_dev.
This change is required to support dynamic remapping of portals.
Change-Id: Idce49aeae43c8861ebe2807df853694f7bacf884
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/379931
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
bdev_opened field in spdk_bdev structure is no longer required.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ie4a368425b11b1c2e1a3a48b5858857b3935498b
Reviewed-on: https://review.gerrithub.io/381375
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ia6b6e5352ce4da04784fb0a3ea1efd0552650067
Reviewed-on: https://review.gerrithub.io/381548
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Added a copy of DPDK's LCORE_ID_ANY.
It's returned by some env functions,
e.g. spdk_env_get_current_core.
Change-Id: I19079a5bd714e32c309e5078e8de97ff1849c0aa
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382025
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Closing the framework has to go through all subsystems
without failure, so return codes are unnecessary.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I53c9b4df12d2357e641130869f398b18637e6ff7
Reviewed-on: https://review.gerrithub.io/381681
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
spdk_app_fini() changed to void, as no operation within it
can fail with meaningful return code.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If77cbf745a8e3fcba4ea24411aa1816f3910cde7
Reviewed-on: https://review.gerrithub.io/381537
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
With this new API, callers can attach one specific ctrlr identified by
the transport ID directly along with optional ctrlr opts. If connecting
to multiple controllers, it is still suggested to use spdk_nvme_probe()
and filter the requested controllers with the probe callback.
Two primary use cases:
1) connecting to the NVMe-oF discovery controller
2) more straightforward way to connect a specific controller (avoiding
the probe callback)
A typical usage of this API with specific ctrlr_opts:
1. struct spdk_nvme_ctrlr_opts user_opts = {}
2. Call spdk_nvme_ctrlr_get_default_ctrlr_opts(&user_opts, sizeof(user_opts))
3. Modify the content of the initialized user_opts with user required value like
user_opts.num_io_queues = 8
4. Call spdk_nvme_connect(&trid, &user_opts, sizeof(user_opts))
Change-Id: Idf67ee5966f6753918c12604342c892d2f3bbe3a
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/370634
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This change is relating to add a new public API spdk_nvme_connect() under
include/spdk/nvme.h. This new spdk_nvme_connect() API will connect the user
specified trid and have a user optional ctlr opts. Rename this API and make
it as public.
A typical usage of this API as following:
1. struct spdk_nvme_ctrlr_opts user_opts = {}
2. Call spdk_nvme_ctrlr_get_default_ctrlr_opts(&user_opts, sizeof(user_opts))
3. Modify the content of the initialized user_opts with user required value like
user_opts.num_io_queues = 8
4. Call spdk_nvme_connect(&trid, &user_opts, sizeof(user_opts))
Change-Id: Ideec8247365ebf7dd15069e29821be8ea27b08be
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/380849
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move local copy of linux header code
to internal include/linux directory.
Change-Id: I81049ff956c72bb32c099a3087cf5f43de911ce4
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/381275
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Functionality of resizing logical volumes is currently
a work in progress, thus it is disabled in this patch.
It is no longer possible to use RPC and lib functionality.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I518e7196096f52e3ad9e91d658e1bb6c3301b688
Reviewed-on: https://review.gerrithub.io/380916
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Currently there is no way to know total space availible on lvol store or
how much is left after creating lvol bdevs.
Four new fields should were added to get_lvol_stores:
- total number of blocks
- number of free blocks left
- block size (currently always 4096, but should be known to user)
- cluster size
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I93dec2d4b2843f0ee51dc9883c8451cf55353f7b
Reviewed-on: https://review.gerrithub.io/381131
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
New optional parameter -c or --cluster_sz in construct_lvol_store() RPC,
as well as in vbdev_lvol and lvol lib API.
This parameter allows to configure cluster size of blobstore that lvol store
is build upon.
When this parameter is not specified, default of 1GiB is used.
spdk_lvs_opts struct was created to facilitate any future options when
creating lvol store.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ibfe8765ede3e78ff19c36f46043e4cec2e5c9f97
Reviewed-on: https://review.gerrithub.io/379356
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
This puts responsibility on the caller to free the buffer
and do any other cleanup associated with the partition base
(for example, GPT buffer).
While here, also clean up a bunch of places where on
various failures during initialization, it would just
free the buffer instead of calling spdk_bdev_part_base_free().
The latter is required to make sure the bdev descriptor
gets closed as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic000339459eca4a4a1d103da2e1f3feffe7e764f
Reviewed-on: https://review.gerrithub.io/378653
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
At very high queue depths, bdev modules may not have enough
internal resources to track all of the incoming I/O. For example,
we allocate a finite number of nvme_request objects per allocated
queue pair. Currently if these resources are exhausted, the
bdev module will return failure (with no indication why) which
gets propagated all the way back to the application.
So instead, add SPDK_BDEV_IO_STATUS_NOMEM to allow bdev modules
to indicate this type of failure. Also add handling for this
status type in the generic bdev layer, involving queuing these
I/O for later retry after other I/O on the failing channel have
completed.
This does place an expectation on the bdev module that these
internal resources are allocated per io_channel. Otherwise we
cannot guarantee forward progress solely on reception of
completions. For example, without this guarantee, a bdev
module could theoretically return ENOMEM even if there were
no I/O oustanding for that io_channel. nvme, aio, rbd,
virtio and null drivers comply with this expectation already.
malloc only complies though when not using copy offload.
This patch will fix malloc w/ copy engine to at least
return ENOMEM when no copy descriptors are available. If the
condition above occurs, I/O waiting for resources will get
failed as part of a subsequent reset which matches the
behavior it has today.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iea7cd51a611af8abe882794d0b2361fdbb74e84e
Reviewed-on: https://review.gerrithub.io/378853
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
A random host ID is generated per SPDK application startup if the user
doesn't specify a host ID during controller startup.
This also changes the default host NQN for NVMe-oF connections to a
random UUID NQN based on the host ID.
Change-Id: Ib0f70dd63e53087716842b412a1f134a9991d4da
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/380528
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Also updated docs.
Change-Id: I2e53c31b2c9c575d8adea23ed92f113e69f324ed
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/380490
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is required for upcoming UNMAP
implementation in bdev_virtio.
While here, also added documentation for
spdk_bdev_io_get_buf().
Change-Id: Ia769ee9b8b132f31208ae66598b29a1c9ed37312
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/379721
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_bdev_unmap_blocks() accepts a 64-bit number of blocks, which can
exceed the NVMe Dataset Management range's 32-bit number of blocks,
which can represent up to 2 TB with 512-byte blocks.
We can support up to 0.5 PB unmap requests by using the maximum number
of descriptors in a single Dataset Management command, which should be
sufficient for now.
Change-Id: I0a4ee77a9be148355991e1a081007ffa020a3ee5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/379202
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is in preparation for enabling hot remove of logical volumes when
their underlying blobstore device is hot-removed.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I310a3f64f0de5d628609c20a1a3b4d38df0755aa
Reviewed-on: https://review.gerrithub.io/377041
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously incorrectly it was assumed that cluster size
was always to be 1MiB. For most evident example of this
please see spdk_lvol_create() sz > free_clusters comparison.
This is now fixed and lvol->sz was changed to lvol->cluster_num.
It was done to increase readability - only dealing with
number of clusters when creating or resizing lvol.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If8cdbad18978319e57b6952dbf5a55d56785f108
Reviewed-on: https://review.gerrithub.io/380467
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch only adds the pci_virtio.c file,
without changing any functionality. This
is required for future rte_virtio migration
to SPDK.
Change-Id: I7774cdfdaf8934fde588e25b5db5dd86a9cbfb3f
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/379484
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
New functions for reading/writing any length of data.
Also simplified specific 8/16/32-bit reads/writes.
Change-Id: I518cdb3ce8d27a25353e80f2e7ca21162b0bd12b
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/379487
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2bb201345968303aae23aa4b288d03eb07dc1ed1
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/379768
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This code was still using an old paradigm of returning the
number of bytes associated with a successful submission.
Just return 0 on success instead - if caller needs the
number of bytes for some reason they have the information
to get it.
While here, return an appropriate negated errno where possible -
we especially want ENOMEM returned when an ioat channel runs out
of descriptors.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5858ccd6cff916b6c80fda7d2c9fce96fb39ef89
Reviewed-on: https://review.gerrithub.io/378858
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This was removed in NVMe 1.2.1 ECN 002.
Change-Id: Icacd53c1f33043cf1c9f30bff1fb9dce1efa69b3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/378681
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The Logout Request reason field is the low 7 bits of byte byte 1; the
last bit of byte 1 is specified to be always 1, and we shouldn't
consider it to be part of the reason field.
The existing debug print code was parsing the reason field correctly (by
masking it against 0x7f), but it's simpler to just make the reason field
into a bitfield of the proper size; this fixes the real bug in the
reqh->reason != 0 check, which did not use the 0x7f mask.
Fixes GitHub issue #198.
Change-Id: I4813da2236c70dc1761e303b34d321750ee36626
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/378658
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It does not seem nessecary to include it, when this it used just once
in lvol disk creation.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I42ead55329f0ac7e55bb73702d071f118a5c7931
Reviewed-on: https://review.gerrithub.io/379678
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
To increase readability, union in spdk_lvol_store_req is now split
into four separate structures.
As well spdk_bdev from lvs_basic/spdk_lvs_req was removed as it was
not needed.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I65c5155f3d15151a97cf8f8e425b26aa1966b677
Reviewed-on: https://review.gerrithub.io/379169
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously, we naively assumed that a completed
reset was the reset in progress, and would
unilaterally set reset_in_progres to false.
So change reset_in_progress to a bdev_io pointer
instead. If this is not NULL, a reset is not in
progress. Then when a reset completes, we only
set the reset_in_progress pointer to NULL if we
are completing the reset that is in progress.
We also were not aborting queued resets when
destroying a channel so that is fixed here too.
The added unit test covers both fixes above - it will
submit two resets on a different channels, then destroy
the second channel. This will abort the second reset
and check that the bdev still sees the first reset as in
progress.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I61df677cfa272c589ca03cb81753f71b0807a182
Reviewed-on: https://review.gerrithub.io/378199
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Upper layers are not supposed to put an I/O channel if there
are still I/O outstanding. This should apply to resets as well.
To better detect this case, do not remove the reset from
the channel's queued_reset list until it is ready to be
submitted to the bdev module. This ensures:
1) We can detect if a channel is put with a reset outstanding.
2) We do not access freed memory, when the channel is destroyed
before the reset message can submit the reset I/O.
3) Abort the queued reset if a channel is destroyed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0c03eee8b3642155c19c2996e25955baac22d406
Reviewed-on: https://review.gerrithub.io/378198
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Defer writing RPC response until after the device has been hotremoved.
Change-Id: I052280b205415e4a2ffa1421653cc49b8e3b1445
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/371119
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Since all direct bdev_io types have the same layout,
there is no need to keep them differentiated.
Change-Id: If8bb85e43c9922c0ebfc39837e3a45006e508b56
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/377686
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This is a mid-step towards unifying all direct
bdev_io types.
Change-Id: Ie4da108f2710891e503eb0863148d8fa182d44ee
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/379291
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
num_blocks and offset_blocks are present in most
other bdev_io types with num_blocks being
before the offset_blocks. bdev_io->flush was
outstanding here.
The fields has been reordered in preparation
to unifying many bdev_io types. See next patches
for details.
Change-Id: I7f12bfdc88a87ab263107d0d0d1b30b848702bcc
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/379290
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This restriction causes bdevs examination/discovery to fail
when there are asynchronous operations. We should remove this
limitation for now. Future plan is to implement approach
similar to the one that is present in kernel.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ibe5572297672022412d25a4a835dc9527ce97f3e
Reviewed-on: https://review.gerrithub.io/378758
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will be used to simulate multi-threading for
bdev unit tests.
While here, alphabetize the existing calls - calloc
had been inserted out of order in a couple of places.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I559cd1fd79e78f03ebdac313e0bbedbcdde4a8c1
Reviewed-on: https://review.gerrithub.io/377968
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This patch shows UUID and base bdev for logical volume stores
when get_lvol_stores() RPC is called.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Idbd0bc6c4a0334e5af8d4a674a203ddb2270f3e4
Reviewed-on: https://review.gerrithub.io/374604
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Continuation of patch 94afad5a [1].
That function could be called from outside of the vhost reactor,
causing data races and possible segfaults.
Now, after this patch, all ctrlr-changing functions take spdk_vhost_dev
parameter, meaning they should be called via external event API [1],
which soon will be the only way of obtaining spdk_vhost_dev pointer.
[1] 94afad5a ("vhost: added external API to call spdk_events on vdev reactor")
Change-Id: I40ea66ad09fb5c433dd897a4e22aedeb423f9b4b
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/371013
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: Ia96ae78ff9530d953181ac5f7255a38f3c8ec430
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Reviewed-on: https://review.gerrithub.io/375392
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_nvme_ctrlr_cmd_io_raw_with_md() will be verified
on Cosmos+ OpenSSD as soon as it will support meta data.
Change-Id: Ib5f3f1f1eba66d0147a566804395bfa5ec959c2f
Signed-off-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-on: https://review.gerrithub.io/377428
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This moves towards the ability to queue ios while
a reset is in progress.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibb8efbcec3931f966eb43030ea91945dfaaa5a77
Reviewed-on: https://review.gerrithub.io/377827
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
First, improve packing of spdk_bdev_io. Move any
fields which must be zeroed into the first cacheline.
Also change type and status from enums (needing 4 bytes)
to int16_t which is still a far bigger range than
needed.
Next, modify spdk_bdev_get_io to only zero the
first cacheline (actually a bit less).
SPDK_BDEV_IO_TYPE_INVALID is also added, making it
explicit that 0 is an invalid value for the IO type.
Previously this was somewhat inferred.
There are still additional improvements that can
be made to this area - primarily combining
spdk_bdev_get_io() and spdk_bdev_io_init() into
a single function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1916d6d5db02c93622b9725ec1095148e3f384d8
Reviewed-on: https://review.gerrithub.io/377799
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
We no longer support resubmitting an existing I/O to
a lower bdev. This enables accurate tracking of I/O
at each bdev layer for purposes of reset handling and
QoS.
__submit_request() in bdev.c is now only called
from spdk_bdev_io_submit(), so just collapse these
two functions together while we are here.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1b46df42b1a6476f9dbd8c61dd3380dbd145315d
Reviewed-on: https://review.gerrithub.io/377626
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
split, gpt and error all have a lot of similar code, and
are based on the presumption of one or more "partition" bdevs
on a "base" bdev. This results in quite a bit of duplicated
code between these three bdev modules. The error bdev
module does follow this same model - it just always has only
a one-to-one mapping between the error bdev and its base bdev.
As all of the modules move to allocating their own bdev_io
rather than allowing for adjusting an existing bdev_io and
resubmitting it, there will be even more duplicated code
between these modules.
So this patch adds a set of helper functions in the common
bdev library to eliminate all of this duplicated code.
This patch also moves the split module to use it - future
patches will also convert gpt and error.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id8032331b46c32da9fca18a077580ccb274c6204
Reviewed-on: https://review.gerrithub.io/376423
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The next step towards fixing synchronization issues between RPC and
vhost controller reactor.
The general idea is to hide spdk_vhost_dev_find declaration, so that
vdev-related functions can't be (incorrectly) called from outside of
the vhost controller reactor. The vdev pointer should only be acquired
via spdk_vhost_call_external_event.
Change-Id: I689226c2271f81624b2651bae3b960b7efb1c01b
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/371098
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The next step towards fixing synchronization issues between RPC and
vhost controller reactor.
This patch makes changes to already present vhost timed event API
to conform it to the upcoming external spdk_events API. The timed_event
API shall be removed from headers in future. See next patch for details.
Change-Id: I31b0d7c383b39c32326daa750663ebdeb4edd562
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/377584
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Allows called to specify something other than stderr such as
stdout. Existing callers updated to use stderr.
Change-Id: I48a703e1474a45952878121a83c19fef1c43d630
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/377420
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch increases maximum length of lun name.
16 was not long enough considering that lvol names can get
up to 48 (lvs uuid + lvol id).
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ic3557a9b3588f8d87f4188ecfaef7d23016a3516
Reviewed-on: https://review.gerrithub.io/377345
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add new versions of all of the I/O calls that take parameters in blocks
instead of bytes. These are intended to replace the old APIs, but
we'll keep them for now to preserve compatibility.
Change-Id: I85ab665c653e8c697016c628837d49aa0c3bfcd0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376255
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
The bdev modules now take all read, write, unmap, and flush requests in
terms of blocks rather than bytes.
The public bdev APIs still accept offset and length in bytes for now.
Change-Id: I57f0955d52272f57755f0ff4dbc56721fdc2ef51
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376037
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
The previous behavior with an empty host NQN whitelist was to allow any
host to connect.
Change-Id: I5401e52d96642cf20afe0d50c692613e67262edf
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376432
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Allow the user to set the source address when connecting to a NVMe-oF
controller.
Change-Id: Ice3add4b2cd3b64fdb8d0d7807d2235f90fd86b1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375837
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
bdev_virtio requires us to do SCSI inquiry for
each device and wait for a response. It currently
polls inline for this response, taking up entire
reactor exclusively. Making it async would allow
other pollers to run while bdev_virtio still has
to wait.
Change-Id: Iefc88e0a2efb5b791ffe23b2e623b7c50d759084
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/375573
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This allows the user to enable/disable getrusage() monitoring at
runtime.
Also change the log level to INFO and enable the monitoring in all
builds, not just #ifdef DEBUG.
Change-Id: I2f5c3bc8cd83dcb2a72dc7078bf2cb43aa28827c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376473
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For example, VERSION_STRING will now be "SPDK v17.10-pre" instead of the
current "SPDK 17.10-pre".
This matches the release tags that we use, and it will generally be more
obvious that it's a version.
Change-Id: I0770124991b18e328f3c47f22e88798950aa8b26
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376669
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The requests are now sent using spdk_thread_send_msg
internally, so the user no longer needs to supply
these callbacks.
Change-Id: I84b0f5f0f1f6fa6eaf9a717934925d3ad802fcfd
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/376240
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK_INFOLOG() is comparable to SPDK_DEBUGLOG() in that it takes a
per-component trace flag, but it is available even in non-debug builds.
This patch also makes SPDK_LOG_REGISTER_TRACE_FLAG() active for all
builds, not just debug builds.
Change-Id: I9727b1a20bd1efa0f97b743d4f529c2b1f6be112
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375835
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In NVMe 1.3, the Identify Controller data SGLS field's definition was
changed; in NVMe 1.2, the first bit simply indicated whether SGLs were
supported, but in NVMe 1.3, the first two bits now indicate whether SGLs
are supported and whether they require Dword-aligned data.
Change-Id: I9181055a86f52ad939b65eca5af66a400594a696
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376027
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Everywhere this is used, we can just use
spdk_nvme_transport_id instead.
Change-Id: I407c812cd6a1ca3afcb3d1fe87c7e22183b09d7a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375461
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This matches the name to the behavior and prepares for addition of a new
log macro for "info" log level.
Change-Id: I94ccd49face4309d3368e399528776ab140748c4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375833
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This moves the thread name setting code into the generic SPDK thread
setup code, so now all spdk_threads can be named, not just ones created
by the event framework.
Change-Id: I6c824cf4bcf12fe64a8e2fc7cdc2d6c949021e40
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375220
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows the user to configure an arbitrarily large number of
namespaces instead of the current hard-coded limit of 16.
Change-Id: I3a29b0de10eafd682b12c54e12411d1f9d41ce85
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375636
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This makes it consistent it with other parts of this structure.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie36488813b53ce20663c50a5c9f049c4c9723d3a
Reviewed-on: https://review.gerrithub.io/375494
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
gencnt is no longer really used since there is no more
differentiation between "soft" and "hard" reset. The
original idea was that a hard reset would complete I/O
known to the bdev layer even if the underlying bdev
module had not actually completed it yet. We do not
actually support that concept, and it was a bit flawed
anyways.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifa2c85bb474c7dd55eb7386d6cad5079f5edbccc
Reviewed-on: https://review.gerrithub.io/375484
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This function was unnecessarily exposed in public vhost headers.
Controller-constructing functions now take string cpumask param.
Change-Id: Ie97d218c525b1dfb11cfd7e7e13c1bf702b1a58d
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/373759
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is useful for places that want to use the size of an NVMe
spec-defined field without having an instance of the corresponding
structure.
Specifically, we can use SPDK_NVME_CTRLR_SN_LEN to replace MAX_SN_LEN
in nvmf.h.
Change-Id: Ida3d59470cce58c0fe984601aa9e2e05cdfaa741
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375467
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1d62e34deed873446a9a87f16188b5c8ed21aea5
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/372551
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This function accepts new connections, so use the more
traditional name.
Change-Id: Ie4aaa4b1d6da81f81fa3cd1505e5ac45e157f052
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375205
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function wasn't even implemented anywhere.
Change-Id: Ie2891853fc954bec7c5ed6df0e7381cb64e543cd
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375204
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also, move the implementation into the appropriate
compilation unit.
Change-Id: Ie1c56bc5e077b81d744414716f9267ceaf591e49
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375034
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The user can now specify which target they want to
search for the subsystem. Also, change the name to
spdk_nvmf_tgt_find_subsystem and put it in the correct
compilation unit.
Change-Id: I7c085959814c14d8400a0ba2572103b0814a4d0e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374879
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The user can now specify which target to create the subsystem
on.
Change-Id: I6206c0d762d59ff6312cb58d36180281baaa7266
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374878
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Most of the work here revolves around having to split
an I/O that spans a cluster boundary. In this case
we need to allocate a separate iov array, and then
issue each sub-I/O serially, copying the relevant
subset of the original iov array.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0d46b3f832245900d109ee6c78cc6d49cf96428b
Reviewed-on: https://review.gerrithub.io/374880
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This can be used in callbacks when a user has a namespace but needs to
call controller specific functions such as alloc_io_qpair.
Change-Id: I00c931e2846e42f540c17f3254fe97a45e9bd079
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/375022
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This new function returns a reference to the target
object. This sets the library up to support multiple
targets in the future.
Change-Id: Id803dbcbb166eca33d8d5c381d9db97628606f3e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374877
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The list of options is going to continue to grow, so avoid
constant API churn by adding an options struct.
Change-Id: Ie9e7248281726d4aee42b3519fcf7535ba01ee34
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374872
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now the user only sees an opaque structure.
Change-Id: Ie73b4bb0157228bbcab1b3c211d7383f881fd07e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374708
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Hide the implementation of spdk_nvmf_listener.
Change-Id: I62d46c76be0962b4246d1b7774ce8249b5baa039
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374871
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Hide the definition of spdk_nvmf_host. Add accessors
for the necessary data.
Change-Id: I28f5b8d243cb1b299724a1dd32fcf2f2bd95e1f9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374870
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These headers are needed on systems that have old
kernels without virtio_scsi.h and virtio_types.h.
Move them out of the vhost directory and into include
so that they can be used by an upcoming virtio-scsi
initiator bdev module.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie6614b8845568729a38665c4c1a366b97978e315
Reviewed-on: https://review.gerrithub.io/374548
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add a new struct spdk_nvmf_ns to hold namespace information, and add
accessor functions so that it can be moved out of the public API in
future patches.
Change-Id: Id926aaa3cc279649057afc65e08024628edbc435
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374740
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now that the discovery controller is using the common admin command
functions, move all of them into the common ctrlr.c file.
This also eliminates the subsystem ops, which are now just direct calls.
Change-Id: I0a25a61e0ad8742d3d76a3cacd46db4701fc7d63
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374733
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Allow passing the NVMe namespace optimal I/O boundary through the bdev
layer.
Change-Id: I27a2d5498df56775d3330e40c31bd7c23bbc77a5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374532
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is just a convenience and replaces the common practice
of passing -1.
Change-Id: Id96734307ebf52ef0ee7dba0e7ac89602b2b5b1a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374520
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
An optional field was added in NVMe 1.3 to indicate the optimal I/O
boundary that should not be crossed for best performance. This is
equivalent to the existing Intel-specific stripe size quirk.
Add support for the new NOIOB field and move the current quirk-based
code so it is updated in nvme_ns_identify_update().
Change-Id: Ifc4974f51dcd59e7f24565d8d5159b036458c6e5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373132
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
replaces all references to strerror in the spdk lib directory with
references to the thread safe strerror_r
Change-Id: I80d946cce3299007ee10500b93f7e1c8e503ee41
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/374012
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add functionality to the bdev layer to handle the nvme write_zeroes
function.
Change-Id: I0dadad273b28c16db5a2275f7d8d57e98253a8d3
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/372171
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I438053d85360f1c3ecc2b7661dbd573e0217ac46
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373672
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Create one transport per nvmf target. Today, there is just
one global nvmf target, but this paves the way for multiple.
Change-Id: Iaa1f8c5e7b3c1e87621ef2a636c68c2dd8fd929e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371748
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Match the terminology used in the NVMe-oF specification,
which is queue pair. For the RDMA transport, this maps to
an RDMA queue pair, but may map to other things for other
transports. It still is logically a "connection" from
a networking sense.
Change-Id: Ic43a5398e63ac85c93a8e0417e4b0d2905bf2dfc
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371747
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is just a rename - the functionality hasn't changed.
Use the same terminology as the specification (which is controller)
so those familiar with the specification can more easily
approach the code base.
This is still conceptually equivalent to a "session" in the
networking sense.
Change-Id: I388b56df62d19560224c4adc2a03c71eae6fed0d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371746
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Ib6245e981d550e951a518176730a0e8d88378207
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/372341
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The NVMe-oF target was written before we defined
spdk_nvme_transport_id. Now that we have it, go back
and replace all of the locations where we individually
tracked traddr, trsvcid, trtype, etc. and use a trid.
Change-Id: I84334a12c7581f414c1e84680f122fe885a3b9dd
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370744
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ie05f58e677107072fea6cc7702bab47a077cb595
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370743
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This is far simpler, although it does limit the bdev
layer to unmapped just one range per command. In practice,
all of our code reports limits of just one range per command
anyway.
Change-Id: I99247ab349fe85b9925769e965833b06708d0d70
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370382
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows the library user the flexibility to use a different
threading model.
It also provides a way to indicate when the connection is closed so the
app can cleanly shut down.
Change-Id: Ibc196c0b8334fcb8f50d0233def16c6acf3c90d6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/372377
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Factor out the iSCSI and GPT CRC32 functions into generic library
functions.
Change-Id: I1f1a5f3968a983b663a51bd984500492eeb12605
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/370765
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There is now only virtual mode. Virtual mode has been
improved enough to reach feature parity with direct
mode and performance benchmarks show no degradation.
Simplify the code by always using virtual mode.
Change-Id: Id5cdb5d4d8c54e661b245ed7250c2f9d66ca2152
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/369496
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This prepares for enabling nbd mounting as a service within existing
applications.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I225ae20dc86b2d70a1a39a325e754b22f34feaee
Reviewed-on: https://review.gerrithub.io/369674
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
after move the spdk_iscsi_conn_handle_queued_tasks() into
spdk_iscsi_conn_execute(), we should handle the situation when the
lun has been removed and then try to access spdk_iscsi_conn_handle_queued_tasks().
Change-Id: I9ac7a5203b49274347c9ee9fbf19558ca87557ed
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/371813
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
No new coverage added, just used the STUB macros in nvme UT
to make sure they cover all the cases and discovered a few small
tweaks needed: (1) added _V variant to declare void stubs (if
someone sees an easy way to make DECLARE_STUB handle this case
that'd be cleaner but I don't think its a big deal) and (2)
updated DECLARE_STUB so that it can set a struct return value
by adding {} to the ut_ variable set statement.
Also ordered the declarations simply for readability, the _V
first, the regular stubs next, the _P next and then the stubs
that don't have a macro to cover them because they do something
other than return a specific value.
Change-Id: Idd8919d2b9e9daa76dd629364ea1d0285657fa81
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/368420
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add a helper function to remove trailing newlines.
Change-Id: I8b1a2bf3d70ef17e0bc7e74429ac955c68cb6bcf
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/370592
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ia1a3560ec51c82f17f694ed3b5e5aa4d1fd1e2bd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/372017
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I3dc71f95f24db0280a79a0ca25ad7eff7d163598
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/371987
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
While here, add a new DEFINE_STUB_V for void stubs.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6b0b27616ddc2525cdd425f65edf8a0bd89ba564
Reviewed-on: https://review.gerrithub.io/371735
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Each SGL element must be physically contiguous; this was not clearly
documented, so add an explicit requirement to the next_sge callback
documentation.
Change-Id: I165af531f8509e1b89e3562439b70d75acb23bcf
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/371729
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5da58262e5b38101e44c29b956bc1c29a6cec492
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/371236
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Iad8554bdfae53f36a09bb0bd5e4280ec2e3d6698
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/370574
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Patch afe860ae deferred freeing the io_device. However, for nvme, the
io_device context (spdk_nvme_ctrlr) is still being destructed before
io_channels are destroyed, causing segfaults on hotremove.
This patch defers io_device context destruction and fixes nvme
hotremove.
Fixes: afe860aeb1 ("channel: Correctly defer unregisters if channels exist")
Fixes: 5533c3d208 ("util: defer put_io_channel")
Change-Id: I7af699174cac0c6c6a6faa2cc65418c47347eb9a
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/370459
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add a new struct spdk_nvme_io_qpair_opts to allow the user to override
controller options on a per-I/O qpair basis.
Existing callers with qprio == 0 can be updated to:
... = spdk_nvme_ctrlr_alloc_io_qpair(ctrlr, NULL, 0);
Callers that need to specify a non-default qprio should be updated to:
struct spdk_nvme_io_qpair_opts opts;
spdk_nvme_ctrlr_get_default_io_qpair_opts(ctrlr, &opts, sizeof(opts));
opts.qprio = SPDK_NVME_QPRIO_...;
... = spdk_nvme_ctrlr_alloc_io_qpair(ctrlr, &opts, sizeof(opts));
Change-Id: I8ac3ea369535cfde759abbe75e1d974b6450a800
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/369676
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ie25a87c4b3f781299fa744fdcff6c9a63d473935
Signed-off-by: Roman <roman.sudarikov@intel.com>
Reviewed-on: https://review.gerrithub.io/365723
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
These variable names are changed to retain conformity with astyle 3.0.1. Astyle 3.0.1 recognizes 'final' as a keyword and incorrectly formats the iscsi_spec.h file breaking the build. Names were changed to avoid this case and maintain consistency within the struct.
Change-Id: I39c29d768c0ddfd459a9e9212c29cf564dad1963
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/369905
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This enables checking permissions - for example,
spdk_bdev_write will fail if the descriptor was not
created with write permissions.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I68b65a560f471f2e0f71a7f42cfa6689b911110f
Reviewed-on: https://review.gerrithub.io/369493
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
We still will sort the bdev_module list so that modules
with an examine() callback are initialized first. This ensures
they have a chance to initialize before later modules start
registering physical block devices.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I792cfb41b0abe030fe2486a2c872cbf329735932
Reviewed-on: https://review.gerrithub.io/369486
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Module initializaiton was made asynchronous recently
to support bdev modules like gpt which need to do
asynchronous I/O. But all modules now do any
asynchronous I/O in their examine() routines, and
init functions only do very basic operations to be
ready to handle examine() callbacks.
So simplify the bdev code and modules to go back to
a synchronous init procedure.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idb16156796ad7511d00f465d7a2db9acda6315b6
Reviewed-on: https://review.gerrithub.io/369485
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This includes file names, functions, #defines, etc.
There are still a few uses of "blockdev" outside of
include/ and lib/ - these can be handled later.
This preps for a future patch to consolidate vbdev
modules and bdev modules into just bdev modules.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I70e575709ae1b0a116b08515fd38ae793de05377
Reviewed-on: https://review.gerrithub.io/369325
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
vbdev modules still open/close bdevs as normal, but
should open bdevs read only when tasting (i.e. reading
the GPT to see if there are SPDK partitions). When
a vbdev module is ready to claim the bdev for purposes
of creating virtual bdevs on top of it, it calls
spdk_vbdev_module_claim_bdev(). It can pass its
open descriptor as well to have it promoted to
write access (required for future vbdev modules like
logical volumes).
Note: error vbdev was changed to copy the base bdev
parameters one-by-one instead of a blind memcpy - we
do not want to copy the base bdev's vbdev_claim_module
into the new bdev!
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If2ee67dc78daf96050343c473671aa3402991bb1
Reviewed-on: https://review.gerrithub.io/368628
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I1899a47fa9d9821c16ea648bbe3290f6306d0e3d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/368626
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_json_write_string_utf16le() writes a UTF-16LE string to a
JSON write context.
Change-Id: I413ffb8a3dee6e1b44ec96ce2415fd1b9c36320f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/368625
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This variable was misleading and unnecessary. Replaced all it's
occurences with SPDK_SCSI_DEV_MAX_LUN.
Change-Id: Iaaf9ed5efb60f9a89585121d2fbec7b43c3723e9
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/368115
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a new spdk_vbdev_module_examine_done() API which
vbdev modules can use to notify the generic bdev layer
once a base bdev examination is complete.
This is especially required for asynchronous vbdevs
like GPT which must issue I/O to the base bdev.
As part of this patch, add examine callbacks
for both split and error, which for now only call
this new functions. Later patches will move code from
the init callback to the examine callback for these
modules. examine callbacks are now required for all
vbdev modules.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I49f2d012d1675b878bcd23afff427c740c6502c7
Reviewed-on: https://review.gerrithub.io/368831
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This eliminates overloading of the term "register"
in the context of bdevs, as well as opens up the
idea of examining bdevs not just when they are
registered, but also after they are closed with
write access.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9e15f9dc0fa4e02214f188f987f9da2dbc8db1f7
Reviewed-on: https://review.gerrithub.io/369042
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic3051b63942770e45be22af0ae03a78a7c543f81
Reviewed-on: https://review.gerrithub.io/368597
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add a name parameter to the MODULE_REGISTER macros, and then
modify each bdev module to pass a string for its name.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If878617ce3c3eacfcf5df44ed6f194f11c66f78f
Reviewed-on: https://review.gerrithub.io/368596
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Support both SPDK_NVME_FW_COMMIT_REPLACE_IMG and SPDK_NVME_FW_COMMIT_REPLACE_AND_ENABLE_IMG.
Return code will specify if conventional reset is required.
For now, return error if subsystem reset is required.
Change-Id: I41a05675a210dd0bbf170517b32ee9e05da9a797
Signed-off-by: Isaac Otsiabah <iotsiabah@us.fujitsu.com>
Reviewed-on: https://review.gerrithub.io/367287
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will enable asynchronous request handling in a future patch, and it
also removes the need for the RPC handlers to know about request id and
the JSON-RPC rules about notification-only requests.
Change-Id: I25aaa8e48bff8d5594ffcccecb61842b1e31ec3c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/368225
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
-Add a configuration option: Read-only flag
Vhost block controller can be set in read-only mode.
Option can be enabled in config file or in RPC call:
'construct_vhost_block_controllerr' with '-r' option
Change-Id: I7e58243be00d33bc04120d573fd4ed7775bb9b2c
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/366086
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Always use "Local7" internally. We want the log API
to be generic instead of syslog specific.
Change-Id: I021f719e90c236f123fa1cadebc0c199b87ba077
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365295
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Retire the old claim/unclaim semantics in favor of
open/close. Clients must now open a bdev to get
an spdk_bdev_desc, then pass this desc to get an
I/O channel.
This allows multiple clients to open a bdev,
although only one may open a bdev with write
access.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4d319f1278170124169a8a75fd791e926b3f7171
Reviewed-on: https://review.gerrithub.io/367611
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Added new function in preparation to implementing device hotremove.
Change-Id: I5b85f76f543b882acf3b0fe40c9e92125594b257
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/366725
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5b77212335e2f10ce263dc59baad87236b98048a
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/367305
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This makes them look more like regular function calls and keeps the
coding style consistent.
Change-Id: I019980bb381abb0dec0aae041340a44bbffe23f3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/368205
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Each virtual bdev now has a pointer to its base
bdev, and a base bdev has a pointers to any virtual
bdevs built on top of it.
Also add a new set of leaf iterators, to get only
bdevs that have no virtual bdevs built on top of
them. These iterators are now used by the bdevio and
bdevperf utilities, in advance of the claim/unclaim
semantics getting removed in a future patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I669783764407cdd4920b5ee121959e2a58c8d436
Reviewed-on: https://review.gerrithub.io/367610
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This allows the user to optionally specify the address family for
construct_nvmf_subsystem (default is IPv4).
Note that the RDMA transport still only supports IPv4 because of the way
it binds to the listen address; this will be fixed in a separate patch.
Change-Id: I534ed75f6f81e53559d1bebcd2f34f1a2b210a97
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/367429
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch removes executable flag from couple files
that should not have it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib4287ec3763a4187a756c18845c61d8b50729820
Reviewed-on: https://review.gerrithub.io/368042
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Includes macros for wrappers (for syscalls) and stubs
(for SPDK functions) including an example of syscall
wrapper as well as a stub with both pointer and non
pointer values.
Change-Id: I9b19d81d5b9cbf2bbb327f58dbf985b3b253e800
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/366348
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Added optional callback inside scsi lun hotremove, so that higher-level
abstraction can be notified about hotremove.
Change-Id: I5f1bd8160e3d770a484068dd73928bc2b64c876f
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/367309
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also add adrfam to the NVMe bdev JSON config output.
Change-Id: I9472bda04947cffc0df9b02eba0035bac01b7d7b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/367292
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ifa6926fb2414bdb40396b1dfbe510d439fe5b1d7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/364871
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In some cases (for example, Intel VMD or Microsoft Azure), the PCI
domain may be larger than 16 bits. Extend the domain field of struct
spdk_pci_addr to 32 bits to accomodate this.
Note that equivalent changes must be made in DPDK's struct rte_pci_addr
for larger domains to actually work.
Change-Id: I21c4666a68bc8a4aedfcc82b44042c02734246de
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/366520
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Cunyin Chang <cunyin.chang@intel.com>
This can be used by threads within SPDK to undo the
affinitization done either by DPDK (for DPDK lcores)
or by inheriting the parent's thread when using
pthread_create().
This will be used by the stub app to unaffinitize
the reactor core to allow the scheduler to flexibly
move it to an idle core.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7e550953cd9dcd7fd9d98bfbb70660994f2eefcd
Reviewed-on: https://review.gerrithub.io/366680
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
All interactions with the event framework and config file
are now in the event_rpc subsystems.
Change-Id: I3f4ddb79c7ec90ccb9a5eb7b25bc9953fe3e41c8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/366341
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Abstract these through the bdev API to break this
dependency on the event framework.
Change-Id: I108505bf27e94b2985f53d0a4dc0b847ae264d25
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/366340
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is an artifact from a past design. There is no longer
any reason to create an event here - the bdev layer will
correctly queue events and call completions on the correct
thread.
Change-Id: I145dab4046899834c0449ec7380dcbb28215b493
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/364831
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This breaks the dependency on the event subsystem logic.
Change-Id: Ic47a219bc1e272c3421b265f74bba959e1aa5f62
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365730
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This removes one dependency on the event framework.
Change-Id: Ib9c8160b1704a15b662a35d5ad1f32c0b745485c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365729
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This removes the event framework dependency from the
scsi library entirely.
Change-Id: I73546d06721487f86c4c6a3be24474a5677bdb41
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365728
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This removes one of the dependencies on the event framework.
Change-Id: I0b0b4dc1afc4a9cdd0679f2667b72a848bb09035
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365727
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This removes the event framework dependency from the net
library entirely.
Change-Id: I7bc1a6f146437fd3d2dab0289bbd845f0ff61ae8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365726
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This removes the last use of the event framework from
the copy_engine library.
Change-Id: I9b8788430249766e0b3bbec591822e2c1bb77792
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365724
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9c1865ff1ca2d8093227c89aa9857ff18d3e346a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365294
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use the log level enum to eliminate the variants of the log
function.
Change-Id: I5bd0e7b4f84f78dab86a5102baa6baa0808627a8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365293
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Name them spdk_log_open and spdk_log_close, and give them
API documentation.
Change-Id: I6c2bbdd6a32894c1e030ec70a97dc054cd7102a9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365292
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The log priority was very syslog specific. Instead, create
a generic set of log levels as an enum.
The log level/priority isn't actually used anywhere today.
Change-Id: Iebcf6b7e1b263b56f317b86b5f2ea0d9e45170f3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365267
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Remove dpdk_ prefix in spdk_app_opts and spdk_env_opts
Change-Id: I6f231f67072b808e84945d41b1fe31a180beb350
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/365787
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This separates the vhost library from the event
framework's subsystem mechanism
Change-Id: I8206fcf0d55bee71c70482d989318e9d118f710a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365286
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This separates the scsi library from the event framework's
subsystem mechanism.
Change-Id: Iac2bbdb861e28ee9af0f13bc7187ac24279d0f5b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365284
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This separates the RPC library from the event framework.
Change-Id: I26a9cb318b56d44ec9337f8a4db98967eb87ad95
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365283
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This breaks the strict dependency on the
SPDK event framework.
Change-Id: Id93d79bfbc482350dc9802fa84a554f7e11f3826
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365282
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This removes the strict dependency on the SPDK
event framework.
Change-Id: Ie6b6f9585d09ab1df0f25bf33d53e7cdecd83faa
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365281
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Much like bdev modules inside the bdev directory,
add a subsystems directory inside of event. The subsystem
specific code for the bdev library is placed in to
a separate library in that directory, breaking the
strict dependency of the bdev library on the event subsystem
code.
Change-Id: I255941b823a9ec3e2d62f22a586414949d8ff5ad
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365055
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now that virtual mode namespaces can be chosen arbitrarily, there can be
holes in the ns_list. Make sure all of the virtual mode code paths are
prepared to handle these inactive but valid NSIDs.
Change-Id: I0d70fd9dae37a29a8358e1d38dcc6cac3237fd9a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/365717
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This also requires vbdev modules to call spdk_bdev_reset
explicitly on the base bdev, rather than just resubmitting
the original reset bdev_io.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie33d506f68506096306c9f0a9ff5e11141578b15
Reviewed-on: https://review.gerrithub.io/365712
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
We can do all of the completion work first, and then
make the decision at the very end on whether to
defer the callback or not.
This also removes the bdev_io defer_callback member -
we no longer need it since we now only defer the
callback itself, instead of deferring the full
execution of the spdk_bdev_io_complete() routine.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3285e34d2fbce34d4254dca2119561ff825ee9e8
Reviewed-on: https://review.gerrithub.io/365711
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In this patch, spdk_app_init will be merged into
spdk_app_start.
Due to this change, we need to change event_perf
to use spdk_app_start, since we cannot use spdk_app_init
anymore. So the related changes for event_perf is to
make it work with reactor framework.
Change-Id: Id67edf209fd628cca361a499068c93aeedfe6167
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/364153
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In this patch, we also update perf and identify
examples. If there is no local nvme device info
parsing, we will set dpdk initialization with no-pci
choice.
Change-Id: I58b2d291b7b53894aeb194a16798ff1c72cf25b4
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/365361
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch shows how to use the spdk_mock library which now only
consists of --wrap capability for a few functions.
Next will be a patch that provides a generic mock capability to
use either the --wrap feature or a combination of globals and
stubs to make adding more UT easier wrt mocking. After that is
in place nvme_ut.c will be updated to use the new library for
all mocking.
Change-Id: I1a6ffb722da043bb70bd4cfe1afa7c5e39a0fccb
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/365074
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Sync the spec header with the major changes for NVMe 1.3.
Some of the added fields may have been added in previous
versions of the spec.
Change-Id: Ia50a52f5192cf450bb5cc2d18fcc1f92ebce7f77
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/362046
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia45876fb6f0eefd987cdb36521ecb591ef1f9499
Reviewed-on: https://review.gerrithub.io/365669
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This ensures a reset is completed after any I/O completions
that may have been deferred.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9efe5c07435371ff8c8e0c826349e9349ade02f3
Reviewed-on: https://review.gerrithub.io/365663
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia0083365b2da63cb38aebb9f7bbc02f4dfd1ae94
Reviewed-on: https://review.gerrithub.io/365263
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is faster than spdk_get_thread(), which iterates over all of the
threads under a lock until it finds the current one.
Change-Id: I957a68438efb5b7d632d2b9b1b567fed7714e02a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/365079
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch doesn't use it yet but sets up the ability to so that
upcoming unit test pathces can. The next patch will include use
of wrap in one nvme UT and then following that the wrap and
today's use of globally controlled stubs will be morphed into a
simple mock type capability for spdk unit tests.
Change-Id: I252160266f0b5c76e50fd213cb3e1686d48b9d0e
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/363441
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It is not actually useful to be immediately returned
a handle to the bdev_io. There isn't anything valid
that the user can do with it at that point. Instead,
return an integer error code.
Change-Id: Iffa9a8dc5b2eefab57e3cc1f68919985431d17d1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/364137
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I3e2ae6cc9465ee62ea506e8803fd70d9b50477db
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/364119
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Theres no need to have vhost SCSI (and incoming vhost block) structures
available in public API. Generic spdk_vhost_dev might be used to
communicate with backedns. Backends are responsible to check if type of
passed vdev valid.
Change-Id: I850a1cc661166ee146d513b0069bb40edc9a761a
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/363581
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ied778fc41ddc5ff7563408eccafc0e0654287b19
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/363608
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
