When an SPDK application shuts down, the bdev layer will
automatically unregister all of the bdevs to ensure they
are properly quiesced and cleaned up.
Some modules may want to perform different operations when
a bdev is destructed during normal runtime vs. shutdown.
For example, for lvol, when the last lvol is cleaned up,
it should unload the lvolstore, release and close the bdev
that contains the lvolstore. You never want to do this
during normal runtime though - it is perfectly valid to
have an lvolstore that contains no lvols. RAID and future
bdev modules such as multipath have similar use cases.
So add a new bdev module callback named "fini_start".
If a module specifies a function pointer for this callback,
the bdev layer will call it before it starts the bdev
unregistrations.
This enables some future patches to the bdev layer such
that it will always unregister block devices that are not
claimed (i.e. logical volumes) before block devices that
are claimed (i.e. the bdev containing an lvolstore).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6e87f5c2b27f16731ea5def858f26e882a29495a
Reviewed-on: https://review.gerrithub.io/421175
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In RDMA, qpairs can't be removed from poll groups because
the poll group defines the completion queue. So don't
allow this operation anymore, even if it were theoretically
possible on other transports.
Change-Id: I69a3d1b336decd2d25e43ddea94f8b2095ef662f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/421174
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
I/OAT device will refuse to resume from the Halted
state until we clear both CHANERR and CHANERR_INT
registers.
We only cleared CHANERR so far. So after the I/OAT
device encountered an error, SPDK would not be able
to initialize it ever again unless it's rebound to
the ioatdma driver.
Unlike CHANERR, CHANERR_INT is only accessible through
PCI config space.
CHANERR_INT is only available on I/OAT devices with
version < 3.3.
Change-Id: Ib369ca76f58c4868fe61ff9532b2e7947e5091d3
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/422026
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Unify the regular mocks and the pointer mocks. Simplify
several of the #defines.
Change-Id: Ica8c69dbb70a685a55b5961b73fd7872f451c305
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/418884
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
If the controller has a serious error and set the Controller
Fatal Status field to 1, host driver does not know this error,
while here, when timeout happens, try to detect the CFS and
reset the controller to recover from such fatal status.
Change-Id: I9fa5b263b34edc52d0f359d874b2920f7570d1f3
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/417622
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently, the bdev layer iterates over all of the
existing channels of a bdev to collect I/O
statistics. But this ignores statistics for
channels that are deleted.
Fix that by keeping an io_stat structure in the
bdev which accumulates statistics for deleted
channels. Use the bdev mutex to protect these
accumulations.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3103c0b8b55973c827d977765f47e5b9e7f58e5f
Reviewed-on: https://review.gerrithub.io/421029
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9b9c8f0c213dcdd4d233171daf41e96033324af6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/421164
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Two extra fields are added to the iostat rpc.
1. io_time. The amount of time since queue depth tracking was
enabled that has been spent on I/O processing.
2. weighted_io_time. Incremented each time this bdev's queue depth is
polled by the amount of time spent processing I/O since the last polling
event times the measured queue depth.
Change-Id: Ie70489ec24dee83f3eeac8f4f813ec7074ff458f
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/419031
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
NVMF spec lists that the property get commnad and set command
attributes bits 7:3 is reserved, bits 2:0 is used for the size
of property to return.
So update the codes for nvmf specification compliance.
Change-Id: If41cdf2b4b1b17ea6a1c44b13dba2a361d541b48
Signed-off-by: dongx.yi <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/420735
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Daisuke Aoyama originally contributed to istgt, the
iSCSI target in FreeBSD. The SPDK iSCSI code is
originally derived from that. Due to copy and paste,
some incorrect copyright attributions have been added
to other files that do not derive from istgt, so
this patch removes those.
It is doubtful, at this point, that there is any code
whatsoever that remains from the original istgt, but
we can revisit that at a later time.
Change-Id: I207e1e6b99d271e2f12690be90a96f7d0c113af7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/420679
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Since destroy_lvol_bdev was implemented, it is now more convinient
to call destroy/unload for lvol store explicitly.
Rather than using lvs struct to pass a request checked on each
lvol close/destroy.
Change-Id: I56ee626e96f8752909d1584a20fe3345c5607fdc
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/420285
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also make the iov_len always set to the used length, not
the total length of the buffer.
Change-Id: I7ebb5b63c6ca7570369f4af0131a23c520c1f7b0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/419025
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch fixes lvol delete behaviour.
First, we look if there are any dependencies that disallow lvol deletion.
If there are any (i.e. dependent clones) we fail.
Otherwise we delete lvol and unregister associated bdev.
destroy_bdev no longer deletes lvol.
Fixes#345
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I99e6abded2ed3ae2742103f81fc7eb937ad1cab4
Reviewed-on: https://review.gerrithub.io/407402
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change the type of nvme_timeout parameter in
spdk_nvme_ctrlr_register_timeout_callback from uin32_t to uint64_t.
Reason: This will make the timeout trigger test more flexible and
will not affect the original meanings.
Also for the configuration file, still maintain the compatability
support
Change-Id: I94c90f67b2e9c57220ab82ecea11a1590d62aed4
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/419326
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
RPC method (nvme-passthrough-cmd) needs base64 to
transfer binary buffer of nvme-cmd through Json text.
Change-Id: I50b9d0efca97da45d6d4fd2a1b53b74811947191
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/417805
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When hot removal of a LUN is started, callback is called for each
iSCSI connection which accesses the LUN. Callback checks all transfer
tasks complete and then close the LUN.
If the connection clears all transfer tasks before getting all responses
to them from the initiator, the initiator continues to retry data write.
Hence the connection have to wait until all transfer tasks complete.
Change-Id: Iad9063673cfedbd78758890d55a4254512e4fca4
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/417199
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Use a descriptor got by opening the LUN to allocate IO channel of the LUN.
This requires opening the LUN is done before allocating IO channel of the
LUN.
Use the descriptor to free IO channel of the LUN too.
Additionally, assert is added to the close LUN function to check if
IO channel is freed before the last close LUN function is called.
Change-Id: Iafb2f9ce790fff25801ea45b3286f3e26943807b
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/417807
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To remove a LUN safely for iSCSI multiple connections, each connection
must return I/O channel after checking completion of all tasks.
Open/close mechanism provides a way to register callback to do it.
Registered callback will be called after checking completion of
outstanding tasks.
Making the close LUN function public is necessary to support hot removal.
Change-Id: I06d50d016b0b7aba0d081da226f5b2e0c911629e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/417198
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
DPDK has an option "huge-unlink" which can be used to
remove mmapped files after EAL initialization, SPDK
doesn't enable the option by default, ethier DPDK,
while here, export a new parameter which can let
user to decide enable it or not.
Fix issues #349 and #350.
Change-Id: Ic516b9f48f7b1c7c51712cc7bb7475ed904ff24b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/419156
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add some known Samsung controllers to those requiring the quirk,
NVME_QUIRK_DELAY_BEFORE_CHK_RDY. Addresses an issue for those
who may not have later firmware that corrects the problem.
Correspondingly, extend the delay from 2 secs to 2.5 secs.
Change-Id: Iee773905a2a49711775042c061f6c347e0da85e9
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/419273
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This change includes a function to enable this feature on a per-bdev
basis. The new information stored in the bdev includes the following:
measured_queue_depth: The aggregate of the outstanding oparations from
each channel associated with this bdev.
period: The period at which this bdev's measured_queue_depth is being
updated.
With this information, one could calculate the average queue depth and
the disk utilization of the device
Change-Id: Ie0623ee4796e33b125504fb0965d5ef348cbff7d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/418102
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
New function was added in bdev layer to allow
handling spdk_bdev_io buffer exhaustion.
This patch adds that functionality to scsi bdev.
Change-Id: Ia6a5be871ae09a4d1166991925f0a44f3b355bdd
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/417032
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is verified on QEMU NVMe which merged the related patch.
Change-Id: I7c62d7a91350e0a877d1c3651796c38b55122f98
Signed-off-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-on: https://review.gerrithub.io/417077
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Matias Bjørling <m@bjorling.me>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
qpair_disconnect has previously presented an entirely synchronous API.
However, it relies on other asynchronous operations to complete its
task. By giving it an asynchronous API, we can avoid possible race
conditions. Patch 1 of several.
Change-Id: If9e26ee70ae5d6c0273750226b4408a8e4587e19
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/417345
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Header file with data definitions from FC-NVMe specification.
Change-Id: Idbc5777d434df2451064ac72b249534e31b094e6
Signed-off-by: John Barnard <john.barnard@broadcom.com>
Reviewed-on: https://review.gerrithub.io/417193
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Madhu Pai <mpai@netapp.com>
Reviewed-by: John Meneghini <johnm@netapp.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This fills two holes and allows the structure to fit neatly into 4
cachelines.
Change-Id: Ie175fec2656ff0b60a8c6fcbc26b1a66a8bf5162
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/417604
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A few open-coded sequences equivalent to SPDK_CONTAINEROF() were
scattered around; replace them with the macro from spdk/util.h.
Change-Id: I95c6e6838902f411420573399ced7c58c2e4ef84
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/418126
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
During spdk_bdev_init, examine_config is called.
This call can claim bdev synchronously, based on
configuration. On spdk_bdev_start if none module
claimed bdev, examine_disk is called and can
perform I/O before claiming bdev.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I1448dd368cf3a24a5daccab387d7af7c3d231127
Reviewed-on: https://review.gerrithub.io/413913
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For vhost-user it's a protocol feature that can simply
be not supported. The subsequent patch introduces an extra
check that may cause config read/write to fail.
Change-Id: I5b0e11845fb6021472c608477f1797dada8ab961
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/417458
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
rte_vhost doesn't respect those, but any other
implementation should.
Change-Id: Id0a0fa031b7c6e9d572cdffeeb3a1e40d824826d
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/417456
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Print an error message instead. The driver can still do
a manual rescan if it wants to see the new SCSI target.
Change-Id: Ieb76ada8625bf00ad068a791b860e4b08ad5cb83
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/417268
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also make it correctly account for alignment and automatically
use the internal iov element if necessary.
Change-Id: I0b33ef9444f0693c2d6b0cdaf221c4a5b0ad2cc3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/416870
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is potentially useful for more types of commands.
Change-Id: Ifbde7ae35294f581b8360891579836fd6f9573a6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/416869
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This can be tested with lb_err_write and ln_err_write of QEMU NVMe options
Change-Id: I16672f015ed4fec1386d27b974f4cd6c88decdf9
Signed-off-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-on: https://review.gerrithub.io/417177
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
IO channel for LUN is used for hot removal as it is emphasized in the
previous patches.
In iSCSI, a SCSI device has multiple LUNs. So freeing only the IO channel
of a LUN must be possible.
Change-Id: I5b355200b4e173512a5aa4b7351534faf8839eef
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/417197
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This fixes intermittent failures with QEMU's virtio-scsi-pci
device.
Apparently, from time to time QEMU enters a broken state in
which it doesn't turn off the NO_NOTIFY flag. This flag should
be set only for the period of time virtqueues are being processed,
but QEMU makes it set all the time. This makes us not signal any
I/O submissions - SPDK thinks the device is currently processing
notifications so it will pick up our I/O automatically, but in
realitly it won't and we end up with a deadlock.
I believe kernel virtio driver doesn't hit this issue because of
event index feature. If negotiated, the NO_NOTIFY flag won't be
used at all. Initial tests show that the issue is indeed gone
with this patch.
Event index for SPDK virtio is not particularly useful when using
a poll-mode device, but it doesn't do any harm. It can be further
optimized in the future, but macro-benchmarks don't show any
performance difference compared with the legacy notification
handling so there's no hurry.
Change-Id: I46e8ab0da170780fcdc0dd239208670ee5ed6357
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/415591
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
With upcoming event index patch we will need
to keep track of how many descriptor chains we
have really put into the avail vring. This patch
is a step towards that.
Our virtio layer abstracts away descriptor chains
as "requests". We can start requests, add descriptors
to them, and finally flush them. So far we used to put
any descriptors directly into the virtqueue desc ring,
and made them visible to the device only through
virtqueue_req_flush().
All of our virtio bdev modules currently flush the
virtqueue after adding each single request, but the
docs for the virtio API say it's possible to start
multiple subsequent requests and flush them all at
once. This was conceptually broken so far and only
the last request would be exposed to the device.
It's now fixed and subsequent requests are put
into the avail vring as soon as they're complete
(either the next request is started, or the
virtqueue is flushed).
Change-Id: I76b7db88ab094c38430edd8ff0e65681775dcb31
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/415590
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
DPDK memzone name limit is 32 and mempool's 29 as it
internally reserves a memzone with "MP_" prefix.
DPDK also offers defines for those limits, but we
obviously can't use them in generic env header file.
Change-Id: I16abcf404eee390a9033135e996cba1716baca5f
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/416979
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is an spdk_memzone_reserve variant with additional
alignment parameter. Now that memzones must be used for
physically contiguous memory, it will become extremely useful.
Change-Id: Ie48d682217e0e2f5c859a1603bb8a81fd2a7d7df
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/416978
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Future DPDK versions may drop physical memory contiguity
guarantee for common memzones. DPDK 18.05 introduces
an RTE_MEMZONE_IOVA_CONTIG (0x00100000) flag, which is
documented as follows:
> RTE_MEMZONE_IOVA_CONTIG - Ensure reserved memzone is IOVA-contiguous.
> This option should be used when allocating
> memory intended for hardware rings etc.
To preserve backward compatibility, SPDK introduces an opposite
flag, SPDK_MEMZONE_NO_IOVA_CONTIG.
Change-Id: I9ea79b096fdb094051f13c9a802740b0e4ccc98e
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/416977
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This const makes the array passed in immutable, but that
isn't helpful or interesting since it just contains
invalid pointer addresses. It may also make sense in the
future to NULL out the addresses in the array in a debug
build. So drop the const.
Change-Id: I921551c7cb1dbf6c765fb301c31906b8b93b7f16
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/417362
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Also report that the NVMe-oF target does not support Flush with the
broadcast NSID.
Change-Id: Iad761a6f81eb099940463a67074a6dccb8871b70
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/416445
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This variable is completely unused in the spdk repository. I believe
that it is a deprecated member of this struct.
Change-Id: Icf1ff1eaa67dc46d17f8ab6a913ff199558876ed
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/416442
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
I missed this one in the initial series.
Change-Id: Id4dc7574a04cd964455852f1a00084b65ab989b3
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/416253
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch adds support for following Open-Channel vector commands:
* Vector Chunk Reset
* Vector Chunk Write
* Vector Chunk Read
* Vector Chunk Copy
Implementation is consistent with Open-Channel specification (rev. 2.0)
This patch provides unit tests for new public NVMe
Open-Channel namespace commands.
Change-Id: Ic71be9357c61c5de82ca672e82a71aa933bd1875
Signed-off-by: Jakub Radtke <jakub.radtke@intel.com>
Reviewed-on: https://review.gerrithub.io/414969
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Add FC definitions to nvme header and library functions.
Change-Id: I8980f55d834c1e1d4f415756cb7a46a3ff1c7db3
Signed-off-by: John Barnard <john.barnard@broadcom.com>
Reviewed-on: https://review.gerrithub.io/416434
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Users can set specified Admin commands or IO commands with
error status, when submitting new commands which are already
set with error status, the commands will return to the caller
with specified error code. So that users can emulate some error
status for their error condition code path.
Change-Id: I4b93c7e4f2b15a659da73b39e26bfa162eb5214e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/410870
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This adds tsc statistics (busy, idle or unknown) to the reactor.
It will help measure actual time we are busy vs. idle during
an event run or whenever a poller kicks in.
Change-Id: Ife556a27a30dab842488bacb5fbee0d4297745c3
Signed-off-by: Vishal Verma <vishal4.verma@intel.com>
Reviewed-on: https://review.gerrithub.io/412695
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch adds an API to decouple blobs parent removing dependency
on it. Blob stays thin after this operation.
Also unit tests for blobstore inflate are improved and reused with
decouple parent functionality.
Change-Id: I96dfee467c78cf4f4d929ec7bc05263f7a23a8aa
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/410829
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This should be set from bdev.c and does not need to be accessed further
from bdev modules.
Change-Id: I2174ed2378d986cec291e7f29e64fe13a5f7df6d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/416060
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
These submission related variables are not accessed from any of our
current bdev modules.
Change-Id: I69e21eea736273183dfeb48922890a4dc9a244cc
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/416058
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Move the status field into the internal structure.
Change-Id: Icf96436925dd829ee89d2491ef55e337823be6fb
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/416057
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The members of spdk_bdev_io which are associated with the data buffer
should only be modified by calling functions in bdev.c
Change-Id: Icacb7f7387d626cf6834480b572e2f31b48666e1
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/416054
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reason: -t has conflicts with other option
in bdevperf or perf(nvme).
Change-Id: I4d641b55c609f4cd0425594b461b1a8b279e8dd8
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/415930
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function is intended to be used when an spdk_bdev
I/O operation (such as spdk_bdev_write or spdk_bdev_write_blocks)
fails due to spdk_bdev_io buffer exhaustion. The caller
can queue an spdk_bdev_io_wait structure on the calling thread
which will be invoked when an spdk_bdev_io buffer is available.
While here, turn off error messages in bdev.c related to
spdk_bdev_io pool exhaustion, since we now have an API designed
to gracefully recover from it.
Also modify bdevperf as an example of how to use this new API.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia55f6582dc5a8d6d8bcc74689fd846d742324510
Reviewed-on: https://review.gerrithub.io/415074
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ifac14f74f6b7681fccbf463f744d145ae8299240
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/415892
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
These were related to recent scsi.h and sock.h
patches.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I17db2eefcbf3ade7a5baad68fb2e12a9474c1ce0
Reviewed-on: https://review.gerrithub.io/416034
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic8aa4d5b8c1edff6875bba38fa5936a6fb9950cb
Reviewed-on: https://review.gerrithub.io/415871
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
There are still a small handful of Doxygen warnings
remaining, but this fixes most of what was left.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3f8bf3efad2382faf1e6d09f85d802e0ce0bb23d
Reviewed-on: https://review.gerrithub.io/415857
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Without these escapes, \r and \n don't show up in the
HTML output, and Doxygen throws a warning.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6bbb8cf5b461999572077cc7381901ca3982d674
Reviewed-on: https://review.gerrithub.io/415856
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This eliminates a lot of the remaining Doxygen warnings.
While here, fix up some of the comments in the features
enumeration, specifically the ranges of feature values
that aren't used yet.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2ff972f3f5bc22dc7605e891875810af92d3b8d1
Reviewed-on: https://review.gerrithub.io/415827
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change the checks to asserts instead. No callers ever
checked the return codes, and if they did, there's
nothing they can do to recover from an error status.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I96d6804d61dfbf6030b3cc78ea59981301417421
Reviewed-on: https://review.gerrithub.io/415539
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I0c6c410d120bec830ec17105de43ca62bf202b7b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/415313
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
There isn't a standardized way to identify Open-Channel
SSD, different verdors may have different conditions.
Here just take the Qemu simulated OCSSD device as a
start.
Change-Id: I1aceaac09db438c203875bcf37badd542618bdd7
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/411590
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jakub Radtke <jakub.radtke@intel.com>
This will be useful for some upcoming patches that refer to
functions that can submit an spdk_bdev_io.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If9b97d53e32d3198f3ef4f2d69f9fafea7a16bf2
Reviewed-on: https://review.gerrithub.io/415033
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This function was logically out of place a bit - it split
up all of the functions that can submit an spdk_bdev_io.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ied601034d7cc73092b62537f1178337dafdb62c2
Reviewed-on: https://review.gerrithub.io/415030
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idbd7ffc4f73133fa77177254bc92a7d121ed35e3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/415059
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is one of the construct_nvmf_subsystems parameters, so we need a
public API to retrieve it for informational purposes and for the
JSON-RPC configuration dump.
Change-Id: I8a7cafa487209311e964ea9ff1b8e09ee8b23c07
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/414864
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently this just includes the overall size of the
spdk_bdev_io pool and the size of the per-thread
spdk_bdev_io caches.
Later patches will allow configuring these via
INI config file and JSON-RPC.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7e235ee6d2d7123d8460eeacde999c7b51017c43
Reviewed-on: https://review.gerrithub.io/414710
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will return the number of currently allocated threads.
Modify the bdev_io caching code to use this new API since these
caches are really per-thread, not per-core. SPDK does not support
dynamic threading yet, but once it does, we will want callers to be
using functions from the thread API - not counting the number of cores
allocated to the application.
spdk_env_get_core_count may still be useful as a helper function, so
it is still kept and not deprecated. For example, app.c uses it to
print the number of cores allocated to the application. bdevperf should
eventually be modified to use spdk_thread_get_count, but holding off on
that for now until spdk_event_allocate() uses threads instead of a reactor
lcore to specify where the event should be executed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5a30e3e825e6821da87d3927a2443768dfd740f4
Reviewed-on: https://review.gerrithub.io/414709
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Madhu Pai <mpai@netapp.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Some features are per namespace and require a namespace ID; the existing
get/set feature functions do not allow passing NSID, so add new API
functions that do:
* spdk_nvme_ctrlr_cmd_get_feature_ns
* spdk_nvme_ctrlr_cmd_set_feature_ns
Change-Id: Ia7dc96e57badf1a56489785fb288493592b58b80
Signed-off-by: Jakub Radtke <jakub.radtke@intel.com>
Reviewed-on: https://review.gerrithub.io/414706
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch adds to nvme driver new public API dedicated for
Open-Channel:
* spdk_nvme_ocssd_ctrlr_cmd_geometry
Change-Id: I69592618d9bcc280346258e771195683d5b33893
Signed-off-by: Jakub Radtke <jakub.radtke@intel.com>
Reviewed-on: https://review.gerrithub.io/412816
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
apptag and its mask are required to set proper PI
elements in nvme read/write cmds.
Change-Id: Ibabc4738f637d13ea16246d5e77e7d045f032af8
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/414786
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add spdk_bs_dump which dumps low level blobstore metadata
information to a specified FILE.
Also add a corresponding -D option to blobcli which
utilizes this new functionality.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iad018b70f8caa4f950d55dd308b9000d55d885ae
Reviewed-on: https://review.gerrithub.io/414479
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: I6babd4cf990bf19b510db88bdfb0ca81e29d9252
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/414700
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Madhu Pai <mpai@netapp.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Leave io_channel.h in the repository and make it simply
include thread.h for backward compatibility.
Change-Id: I5320fb8e9e5bc6e39ee9ce44cd79570194a8b841
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/414699
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Madhu Pai <mpai@netapp.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This allows applications to trigger printing of the
default SPDK command line option usage messages if
needed. This could be useful in cases where the
app expects the user to specify a parameter and
finds the parameter was not specified after
spdk_app_parse_args() is finished.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6f2ebdfe1488091a539830f9e78e342a6c601382
Reviewed-on: https://review.gerrithub.io/414472
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I23c34d4dcb542aa9ab3fa8cb734cf9cc0e0fc5da
Reviewed-on: https://review.gerrithub.io/409144
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I9552354d620986c2a3d6b071f32b587e9e683198
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/413861
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
verified on QEMU NVMe for OCSSD 2.0 and RFC will be shared soon
Change-Id: I01c513e30768ac1961a5c5af20de3a2490da7729
Signed-off-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-on: https://review.gerrithub.io/413854
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch does a little cleanup of SPDK SCSI layer APIs.
spdk_scsi_task_alloc_data() is only used in spdk_scsi_task_scatter_data().
spck_scsi_task_free_data() is only used in spdk_scsi_task_put().
The latter was called in UT code but this can be removed without any
degradation.
SPDK SCSI layer is relatively matured and these will not be used
out of lib/scsi/task.c.
Additionally memory leak detected by ASAN is fixed in this patch.
Change-Id: I8eff7b4dbfc307c211087734649a9b9b10555f8d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/413872
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
int16_t is not used in SPDK yet. Hence add decode function only
for uint16_t.
Change-Id: I86f86a6768d95896d1840370f2d176c770c41418
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/413711
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Suggested-by: Jonas Pfefferle
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I33cf41d39a4546fbb5f44fccc1380c731d0224af
Reviewed-on: https://review.gerrithub.io/413705
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jonas Pfefferle <pepperjo@japf.ch>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This begins the process of hiding data members in
spdk_bdev_io that don't need to be accessed from
within bdev modules.
One strategy would be to implement accessors for
every data member in the structure. However, that
may have negative performance effects. Instead,
create a new internal structure within the old
structure. This new structure will still be visible
for now, but at least makes clear which members
are accessible and which are not.
This patch shifts one data member to the new structure
as an example.
Change-Id: I68525db995325732fe9f5fc3f45b06920948309b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/412298
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These are needed in some cases on x86 where a compiler
barrier is not sufficient - for example, ensuring an
rdtsc instruction has executed before subsequent
instructions.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I339e2dd6138ccb11b1492e70f7c724976ef3038b
Reviewed-on: https://review.gerrithub.io/413145
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch introduces payloads, opcodes and error codes
that are defined in Open-Channel specification (rev. 2.0).
Change-Id: Ic3c04174a4a3dcb6bdfae2f0713d1815ee07df94
Signed-off-by: Jakub Radtke <jakub.radtke@intel.com>
Reviewed-on: https://review.gerrithub.io/412518
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
The bdev module writer's guide at the top of bdev_module.h is outdated;
replace it with a link to the up-to-date documentation in
doc/bdev_module.md.
Change-Id: I36f745f70596b9e4c9a7495a019a03268460d2dd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/412539
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will become the public interface for implementing
bdev modules. Right now the file exposes too much of
the guts of the bdev layer to modules, so it needs
to be stripped down.
Change-Id: Ie8b8c3271d51fdb8d0c24a80244b3f3e510c8790
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/412297
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
As of NVMe 1.3b, there is only one command set. But pipe
this through the driver per-spec anyway.
Change-Id: I4faf8596f5ce638e5e2a500b424e00ceb6e89edc
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/412102
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This will allow multiple independent callers to request I/O statistics
without stepping on each other (previously the stats would be reset on
each request, which only works with a single caller).
This also means that we can now allow requesting stats while the VTune
integration is enabled.
Change-Id: Ia9d4d6fd37fa66b3671cd33b3183c90524f955bd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/412257
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib999d3f082f5d632cb1aaf089504d0cd48e77539
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/408696
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Add a new function and its RPC caller. By using it, we can
get the statistics of all the bdevs or the specified bdev.
Meanwhile, with this patch, the open source tool 'sysstat/iostat'
can support for SPDK. The 'iostat' tool can call this function to
get the statistics of all the SPDK managed devices via the rpc
interface.
Change-Id: I135a7bbd49d923014bdf93720f78dd5a588d7afa
Signed-off-by: Yanbo Zhou <yanbo.zhou@intel.com>
Reviewed-on: https://review.gerrithub.io/393130
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
These were marked as deprecated in v18.04 and scheduled for removal in
v18.07.
Change-Id: I2587bcaf89cdcc757ad902ac42ccd9adce9c8f92
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/410727
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Inflate call can be used on thin provisioned blob or clones.
Function allocates all unallocated clusters on specified blob and:
- For clones, copies data from backing blob.
- For thin provisioned blobs, clusters are zeroed.
After this call all dependency from specified blob is removed
what allows deletion i.e. snapshots.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Change-Id: Ibff569e45b12068b2fb46557156be348b36c252b
Reviewed-on: https://review.gerrithub.io/399367
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Passing no flags to spdk_malloc is not a valid usage. Instead,
just call POSIX malloc.
Change-Id: I759e2c0c0befeb4983df953edd1529d6359b4c55
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/410479
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: I9cfc237a8514a1d323313851e14576ba2ba69077
Signed-off-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-on: https://review.gerrithub.io/410529
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The realloc breaks TAILQs inside the structures, which causes
subtle bugs. Instead, statically allocate all of the subsystem
arrays. This sets up the maximum number of subsystems to be
configurable, but does not actually expose it through the
config file yet.
Change-Id: I7347b6002b6babc0678ce59cd218a454fe3a6f88
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/410521
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8573732b3049e2a5b471e5a0313e39019fdaad5f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/410518
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Future changes will rely on the ability to atomically
swap this data structure out.
Change-Id: I77b93252df63155692271b5665cc040cb83a33d0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/409224
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
RPC state of the RPC server, g_rpc_state is set by spdk_rpc_set_state(state).
If the command line option '-w' is specified, g_rpc_state is initialized to
SPDK_RPC_STARTUP. Otherwise, g_rpc_state is initialized to SPDK_RPC_RUNTIME.
When g_rpc_state is initialized to SPDK_RPC_STARTUP, SPDK start RPC server
and wait for start_subsystems_init RPC.
When SPDK receive start_subsystems_init RPC, SPDK start initialization of
subsystems. The RPC waits for completion of initialization of subsystems.
When SPDK completes initialization of subsystems, SPDK change
g_rpc_state to SPDK_RPC_RUNTIME and then start application.
Upcoming new RPCs to initialize options of NVMf-tgt and iSCSI-tgt will be
able to be allowed before start_subsystems_init RPC is called.
Change-Id: I4fa9c22b64e2fdbc9b9fdb2c47f0018f73f84f7e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/406919
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add state_mask to each RPC method and state to RPC server, respectively.
State mask of RPC method is set at registration. State of RPC server
is changed according to the state of the SPDK.
When any RPC method is recieved, if the bit of the RPC server is on in
the state mask of the RPC method, it is allowed. Otherwise, it is
rejected.
When any RPC is rejected by state_mask control, the new error code
is returned to describe the error clearly.
Change-Id: I84e52b8725a286e9329d61c56f498aa2c8664ec1
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/407397
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Ioat config's Whitelist is late for DPDK EAL and single application
occupies all IOAT copy engines.
Change-Id: I8749f740ff1bec5bb022b39fc2256880369b467a
Signed-off-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-on: https://review.gerrithub.io/405911
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Defined in ratified NVMe 1.3 TP 4008 (2017-08-22).
Change-Id: I42479c8a0acbdc1a2df54061ffbc12a54385cd94
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/409059
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: I712fb4fce02821bc7ae483d06aa905f54b4998aa
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/409361
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I67ad1bb09b77834bb35a56b2d6982cf10d59152f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/409339
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will allow environment abstraction layers to provide different
types of memory depending on whether it needs to be DMA-able and/or
shared across multi-process boundaries. For the DPDK environment, the
flags can be ignored, since rte_malloc() supports both DMA-able and
shared memory.
Change-Id: I5ee894337dd9d6e24418848c0a35f131184383c8
Signed-off-by: zkhatami88 <z.khatami88@gmail.com>
Reviewed-on: https://review.gerrithub.io/402334
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Unlimited I/O per second is equivalent to disabling QoS.
Change-Id: I03a489dd18b5d1a9a42f7853248911e97b7a211e
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/408291
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The QoS parameters are only used from the QoS thread,
so gather them together in a struct pointed to by the
bdev.
Change-Id: I91005f1d00205217a189d1ebacdb55782814f247
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/407356
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Needed for crypto vbdev work.
Change-Id: Ib18ce3aaecf2388cf2cdc4dea110db514c8c1f1b
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/408256
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This commit provides an API to obtain an information about
snapshot and clone relations.
The main objective is:
1) Determinate if we can delete snapshot (if have some created
clones),
2) Provide an information about parent/children nodes to the upper
layer (e.g. lvol)
Realization:
1) Structure parent-children is stored in the blob store object
and updated on:
a) blob store load,
b) blob create/delete,
2) Full information about parent-children is provided via new API:
spdk_blob_get_parent() and spdk_blob_get_children(),
Note:
While we don't store an information about these relations in the
blob store, we need to open all blobs on blob store load to create
it. It should be considered that it have an impact on the blobstore
loading performance.
Change-Id: Ie0237fa5b93af01aa73d1f68ac1694e653fb75e5
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/405025
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch adds a new RPC method to configure QoS on bdev
at runtime.
For example:
set_bdev_qos_limit_iops Malloc0 20000 --> Enable QoS on this
block device with 20000 IOPS rate limiting.
Change-Id: I1ee8b313b769fb5a664820f4ba827e0230be4b5d
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/393255
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Update the thread-local caches with new namespace data during each call
to spdk_nvmf_subsystem_remove_ns to handle the case where the user
requested to remove a namespace and then immediately add a different
one at the same namespace id. This makes the call asynchronous.
Change-Id: I8fd1968f7da78966386de18506b98d403b82d80e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/408220
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It actually returns the size of given queue,
so renamed it to get_queue_size to clean up
the API
Change-Id: I88551116b3dc19644764bba78b58444802a1d443
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/408174
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This reverts commit 498f9add11.
Making the subsystem removal asynchronous seems to be triggering an
intermittent failure in the NVMe AER test. Let's revert this for now
until we can diagnose the issue.
Change-Id: Ie1d598f0d5cce07e6869d87cd8388848caa78e46
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/408118
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Performing a subsystem update on each poll group after the addition or
removal of a namespace allows us to avoid the case where we pause a
subsystem, perform a removal, then an addition, resume the subsystem and
don't update the channel for that subsystem. This, however requires that
spdk_nvmf_subsystem_remove_ns be asynchronous.
Change-Id: I856572c02e6267f708da3a956accbbedae7260fb
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/407012
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The new construct_virtio_dev allow creating virtio SCSI and blk for both
PCI and user transports.
Change-Id: Ibd79c4fb75e3cbd993b46227d86e915c1b740a18
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/405419
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch introduces API to get some blobs capabilites:
bool spdk_blob_is_read_only(struct spdk_blob *blob);
bool spdk_blob_is_thin_provisioned(struct spdk_blob *blob);
to be used in upper level in the unified way.
Change-Id: I4411bb3f4dd0c64826ae16a66141b2911cbaab79
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/405022
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch fixes issue where user creates 2 lvols
with the same name simultaneously. New solution
builds list of names of lvols that are currently
being created and when new request comes it compares
name against existing lvols and lvols that are in the
process of creation.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I31b59ee13b5b9bae531866925dd409b143f08ad4
Reviewed-on: https://review.gerrithub.io/407408
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6627fd4253094548816c50bd97e13b22dc245df1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/407838
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Add "NoPci" to command line options as '-u' to avoid lost of
compatibility when JSON config file is supported.
Change-Id: I8ee429f4f66f8837da22ef8e259a1a011edd9257
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/407036
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add new optional bdev module interface function, init_complete, to notify bdev modules
when the bdev subsystem initialization is complete. Useful for virtual bdevs that require
notification that the set of initialization examine() calls is complete.
Change-Id: I0997fb5749d430f2fd3a40172ec8a1d5caa96964
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/407222
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4fa713afbb94ad0d0d61860f1bf9ab361eaa0dde
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/407360
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The 'sz' parameter to spdk_blob_resize() did not match between the
declaration and definition; it should be uint64_t, since it contains a
number of clusters.
Change-Id: I1cb386321cf85ac6c6220e1112b7223a967cd8cd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/407018
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change vbdev_lvol_resize() char name argument
to struct spdk_lvol lvol.
Add spdk_bdev_notify_blockcnt_change() after
succesfull spdk_lvol_resize().
Some code clean up and refactoring.
Change-Id: Idaa5bd4707e2479dfee50459a9844319b8c35d3a
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Reviewed-on: https://review.gerrithub.io/394521
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The bdev layer has three types of channels:
* bdev channels - one per bdev per thread
* module channels - one per bdev module per thread
* management channels - one per thread
Arrange this in a hierarchy where bdev channesl point to
module channels which point to management channels. Rely
on the channel mechanism to reference count and release
resources at the correct time.
Change-Id: I9341068f95ec2a3897c5a1d897895a4f5cc49299
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/406854
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Change-Id: Ibc43e3ee65d85a83d78d6e15457ae57992a1188a
Reviewed-on: https://review.gerrithub.io/395059
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Change-Id: Iad67be79d0ddd8c498950c4f7b1b3203e47a7a41
Reviewed-on: https://review.gerrithub.io/393936
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch adds new feature of blobstore.
New call creates a read-only snapshot of specified blob with provided options.
NOTE:
This patch doesn't cover recovery operation if snapshotting fails. This operation
will be implemented and added later.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Change-Id: I470ca13525638fa6df485d508b3adf71b6b69c0b
Reviewed-on: https://review.gerrithub.io/393935
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
To support resize operations during I/O, we will need
to send messages to each thread to quiesce I/O while
the resize operation is in progress to guard against
the cluster map memory changing while another thread
is accessing the cluster map.
Therefore, spdk_blob_resize needs to be asynchronous.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ida037334739b4b80a1dbc76e8f1c70bca8b73582
Reviewed-on: https://review.gerrithub.io/404616
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This was internally asynchronous already, but make it
explicitly asynchronous so other code can properly
wait on the operation to complete.
This fixes an intermittent CI crash.
Change-Id: I81c9b19673566047dcffa94796236ca9fd7fa7d0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/406226
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
IOAT module of copy engine requires config information in the .INI
config file. However dump config text is not supported yet.
Dump config text is legacy feature but this becomes a preparation
for the upcoming JSON config file.
Change-Id: I9b7349cac9c00ca3ce1d944a84cbc445a6f1aec4
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/405845
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
- Add support for multi page CNS 0x2
- Use CNS value 0x02 (SPDK_NVME_IDENTIFY_ACTIVE_NS_LIST)
to query active namespaces
- Add an API to iterate the active list
Change-Id: Iea524881fa6e3610a7d85ab02a2005a92fd633df
Signed-off-by: John Meneghini <johnm@netapp.com>
Reviewed-on: https://review.gerrithub.io/401957
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Updated to Linux 4.9.0. This introduces e.g.
VIRTIO_CONFIG_S_NEEDS_RESET flag that's required
for the next patch.
Change-Id: I562d0b9d9a3cb18fd484dda52fb447087062da47
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/405916
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was missing the "next reset slot" field, and the revisions were
defined as uint64_t, despite being ASCII strings.
Change-Id: I1f47dab14e0bce317afeefa499ce5e6b518b5c09
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/405824
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPKD base bdev might be part of multiple vbdevs. The same is true in
reverse direction. So consider folowing scenario:
bdev3 bdev4 bdev5
| | |
+-+--+ + +--+--+
/ \ | / \
bdev0 bdev1 bdev2
In current implementation bdev0/1/2 will apear as base base for
bdev3/4/5 which is obviously wrong.
This patch try to address this issue.
Change-Id: Ic99c13c8656ceb597aba7e41ccb2fa8090b4f13b
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/405104
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This isn't possible to implement using the current public API of DPDK,
and all of the in-tree users have been removed. Replace the
implementation with a stub that always returns NULL and mark it
deprecated so that any users have a release to update their code.
Change-Id: I4bc71f0a9fd518923484e862333b0c5e86883980
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/405710
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows us to remove most uses of spdk_pci_get_device(), which looks
up a PCI device structure from an arbitrary PCI address. This function
is problematic, since it uses internal DPDK data structures that aren't
meant to be part of the public API. There is still one use in the
codebase, which will be cleaned up in another patch.
Change-Id: Ia1fe1f799c240195f6871c1d92821074f884c4e6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/405707
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This makes use of the `--single-file-segments` DPDK param.
Change-Id: I21ddd955841748ea087c0d006875514be56f2107
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/401112
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function retrieves the UUID from a namespace, if available.
Change-Id: I98c55375948b92eaf429b41fb36dfea4e2b780a2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/404734
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
g_virtio_driver contained just a list of all
Virtio-SCSI devices. It's now being removed for
two reasons:
* it's backend-specific, doesn't fit a generic virtio lib
* it's difficult to ensure thread-safety for it
Virtio bdev modules will now manage their Virtio
devices by themselves. Virtio-SCSI has now an internal
device list. (And VirtioBlk module maps devices to
bdevs 1:1, so doesn't need any additional work here.)
Change-Id: I3bc68d76d6904df5c56f00fca7ab387871ecf88f
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/405179
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is not needed - we can easily get the number
of clusters from the underlying blob.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I94a716731bd1b8c4b333fe295bd5a963928b4330
Reviewed-on: https://review.gerrithub.io/404615
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Write information needed to recreate each bdev.
Change-Id: I3d2b24fd4aaa8b98ec558d864cc28b55a899452f
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/401217
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A new optional parameter is added to the NVMe-oF target namespace
options to set the Namespace UUID, which will be reported via the
Identify command Namespace Identification Descriptor list.
Change-Id: I53c6d6fa6475d3395d412d196b42000715e9ed81
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/400894
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Several of the 'bits' members were accidentally declared as unions
instead of structs.
Change-Id: Iaaacf79438899794581e3f69c8afb606a244eb1c
Fixes: 8d8f4ac304 ("nvme_spec: define Get/Set Feature structs")
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/404409
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
These will allow some simplification and cleanup of the NVMe-oF target
and other NVMe Set/Get Feature code.
Change-Id: I475e3ddbc6261a0033b604de1b6d25d4e2522ee5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403899
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Move the commonly-accessed fields to the front so they end up in the
same cache line where possible.
Also tweak the types of type, status, error.nvme.sct, error.nvme.sc,
error.scsi.sc, and error.scsi.sk (they can fit in 8 bits), and move the
Write Zeroes splitting variables into u.bdev.
This reduces sizeof(struct spdk_bdev_io) from 272 to 224, in addition to
the better cache line usage.
Change-Id: I4a91fd07f252e7add4a2db179df9c53268672198
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/404053
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Its possible for a net_framework to have initialization and finish
functions. This patch adds mechanism to register spdk_net_framework
and executes appropriate functions during subsystem start/finish.
Change-Id: I06d9cb6e98f843794296b833caa3c79735f06f12
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/403703
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This enables more clear division of spdk_sock_* functions
and spdk_posix_* ones.
Change-Id: I329eaf99de9390c8473b57427966dfe6af777abb
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/403700
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
We must hold bdev->mutex around all QoS channel manipulations, not just
channel_count; otherwise, there are race conditions.
Change-Id: I6183aef83f4d5789bded426a1832e3faaa688363
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403367
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will be used to track time used in pollers - each poller can now
indicate if it found any work to do or not.
For cases where it was obvious and the infrastructure was already in
place, existing pollers have been modified to return 0 or a positive
value to indicate whether work was done. Other pollers have been
modified to return -1 by default, indicating that the poller isn't
indicating anything about whether work was performed. This will allow
us to find un-annotated pollers easily in the future and fix them
incrementally.
Change-Id: Ifebfa56604a38434fac5c76ba7263267574ff199
Signed-off-by: Roman Sudarikov <roman.sudarikov@intel.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/391042
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There are two separate function pointer types declared in io_channel.h:
spdk_thread_fn for cross-thread messages, and spdk_poller_fn for
pollers. They currently have the same signature, but this will be
changing in an upcoming patch, so we need to fix the poller-related
functions to use the correct type (a few were using spdk_thread_fn by
mistake).
Change-Id: I0f0d8f1eea9905395125fc91e0355a49e65be99e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403598
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This better matches the style in the rest of SPDK.
No functional change - this is a pure find/replace of
spdk_bdev_module_if to spdk_bdev_module. Instances of this struct will
be renamed in another patch.
Change-Id: I3f6933c8a366e625fc3a1b6401aee26ee03ba69c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403368
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Modifies behavior of spdk_trace_init() such that it returns
on failure instead of terminating with exit().
Change-Id: I0ba321cddd233008a4b19bc592728230d89a11b2
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/403357
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is to add the basic support of QoS on bdev.
Including two major functionalities:
1. The QoS rate limiting algorithm:
a. New IO will be always queued first also under
the no memory condition
b. Start the QoS IO operation based on the limit
c. A poller started in each millisecond to reset
the rate limit and send new IOs down
d. The rate limit is based on the millisecond and
converted from user configurable IOsPerSecond
2. The Master Thread management:
a. Add a per bdev channel_count
b. Whenever QoS is enabled on bdev, if QoS bdev
channel is not created, create the QoS bdev
channel and assign the QoS thread
c. When new IOs coming from different channels
(threads), pass the IOs to the QoS bdev channel
through the thread event
d. When the IOs are completed from the QoS bdev
channel, pass the IOs back to its orignal
channel(thread)
e. Destroy the QoS bdev channel when it is the
last bdev channel for this bdev. Defer the
destruction if current thread is not QoS thread
Change-Id: Ie4444551d7c3c7de52f6513c9db926628796adb4
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/393136
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently SPDK_BDEV_MODULE_REGISTER() take many parameters. Extending it
(eg for incoming JSON configuration dump/load) is quite challenging and
error prone. As we are already here in next patches, rework this macro
to take one parameter - the pointer to struct spdk_bdev_module_if.
This patch also remove following macros:
SPDK_GET_BDEV_MODULE - this is not really needed, to find module outside
module translation unit use spdk_bdev_module_list_find()
SPDK_BDEV_MODULE_ASYNC_INIT and SPDK_BDEV_MODULE_ASYNC_FINI - replaced
by bool fields in spdk_bdev_module_if struct.
Change-Id: Ief88e023fbbaee7d5402c838dbecbdffd4dfb259
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/402883
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Don't do anything under the scene as adding/removing fields in struct
spdk_subsystem will require both macro change and C file changes.
Change-Id: I11bc0d5758edd7e0e0bd3f93e251d868cd9b1d2b
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/401850
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This allows vhost initialization to be fully handled in the event
framework subsystem.
Change-Id: Ic0ff11f3765cc553b7ca183027209fb6dd131364
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403226
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This lets us drop the basename parameter from spdk_vhost_startup(),
which is a step toward making vhost initialization happen as part of the
event subsystem instead of in the spdk_app_start() callback.
Change-Id: I4fe18c4c3f12b706e73ae74500be58f1582110fd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403225
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Modifies behavior of spdk_app_start() and spdk_app_parse_args()
such that they return on failure instead of terminating with
exit().
Change-Id: I82566417f04e1ae2e3ca60a00c72e664db26c9e4
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/401243
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Ief1f809308fbde2e696c60d3ce79c0720cb3e2ff
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Reviewed-on: https://review.gerrithub.io/398934
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In addition to the lvolstore uuid, add a per-lvol uuid for bdev
identification.
The lvol uuid is stored as an xattr for each lvol blob; if an lvol blob
without a uuid xattr is encountered, the lvol bdev will not report a
uuid for now (it will be set to all zeroes, which will be treated as
no uuid available by the generic bdev layer).
Change-Id: If00221383a12d62234fc085d56e257dd48053103
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402973
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add a generic way to get a UUID from a bdev.
For now, malloc and null bdevs generate random UUIDs, and no other bdev
types report a UUID.
Change-Id: Id9608c8c1b3ce3f1783e7f74bef96d44cd5d98a7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402177
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This lets us have a common place to put definitions like the length of
the UUID string, as well as abstract away some of the API warts in
libuuid (non-const values, no size checking for uuid_unparse, etc.).
Change-Id: I80607fcd21ce57fdbb8729442fbb721bc71ccb98
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402176
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Automatically detect more whitespace errors.
All existing cases are fixed; only whitespace change (verify with
diff -w) except for one comment style fixup in include/spdk/nvme.h.
Change-Id: If750e54b9c8e3421ea6feda5f20184a31431631e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402360
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
In 35a331a9 we added a new API that enables peer-2-peer (P2P) copies
between NVMe SSDs using Controller Memory Buffers (CMBs) that support
DMA operations. Add documentation for the API, the example application
(cmb_copy) and for P2P setup and operation.
Note that this new API is currently marked experimental.
Change-Id: Ifeedb86d5b72b3aa7a6803b87c4d4709c54108f8
Signed-off-by: Stephen Bates <sbates@raithlin.com>
Reviewed-on: https://review.gerrithub.io/401961
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Briefly tested with SPDK target via bdevio
through both vhost-user and QEMU's virtio-pci.
vhost-blk driver is not mentioned in any doc yet.
A virtio-blk bdev can be created as following:
`construct_virtio_user_blk_bdev /tmp/virtio.0 MyVirtioBlk0 --vq-count 16`
`construct_virtio_pci_blk_bdev 0000:01:00.0 MyVirtioBlk1`
or
```
[VirtioUser0]
Path /tmp/vhost.0
Type Blk
Queues 16
[VirtioPci]
Enable Yes
```
If `Type` field is not present, the VirtioUser
section will be parsed as a SCSI one, preserving
backward compatibility.
Change-Id: I3eae9f3b90570fbb0177df4951e5eed86fe07c66
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/393056
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
blobfs and lvol can now use this to automatically iterate
all existing blobs during spdk_bs_load. Changes to blobfs
and lvol will come in future patches.
This will also be used in some upcoming patches which need
to iterate through blobs during load to determine
snapshot/clone relationships.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic7c5fac4535ceaa926217a105dda532517e3e251
Reviewed-on: https://review.gerrithub.io/400177
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The md (metadata) thread is always the thread that
initialize/loaded the blobstore. Metadata operations may
only be performed from this thread. This patch adds some
more asserts in metadata functions that were previously
missed.
While here, also update some of the blobstore documentation
related to this.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5cafdb3ba402ceb6c3ccb6fdd9d36e7768f59f39
Reviewed-on: https://review.gerrithub.io/400885
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Unfortunatly not all bdevs produce its configuration in responce to
get_bdevs RPC call (eg nvme is producing tons of additional
informations). To not breake any existing scripts rename
'dump_config_json' to 'dump_info_json' instead of reworking those
callbacks. Next patches will introduce real 'dump_config_json' handlers
and API
Change-Id: If9c1a4ab864791b24a5f7d022e970cd65990ffc0
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/401216
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Three new RPC methods are added to allow modification of the NVMe-oF
subsystem allowed host whitelist at runtime:
- nvmf_subsystem_add_host
- nvmf_subsystem_remove_host
- nvmf_subsystem_allow_any_host
Change-Id: I5c98658f949dad013165c04497cca49867022ba0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/396063
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
These new names are much more clear and are aligned with other
functions such as spdk_blob_close.
Keep the old names around for now but deprecate them. We will
remove them in next release.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idc60fd0b19fa2a8b0247a1f5835774d342e721f9
Reviewed-on: https://review.gerrithub.io/400884
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is needed for an upcoming change which will
prevent metadata functions from being called on
threads other than the metadata thread. Without
this change, there was no way for this function
to return an error if it was called from the wrong
thread.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I67e591140194ff6ad250878168f6b166a1ff2282
Reviewed-on: https://review.gerrithub.io/400883
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Unify several similar functions checking for a buffer of all zero bytes
into the util library.
Change-Id: Idfbeffa22add34ac9ed1bd75ee27d6bd8b188940
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/400892
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_sock_group_impl represents the implementation of
a sock group for a given spdk_net_impl (posix, vpp, etc.)
This extra abstraction is required for enabling
spdk_sock_groups with sockets associated with different
spdk_net_impls.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7a380cc62c59bdac98996faf0387550c234165a0
Reviewed-on: https://review.gerrithub.io/400527
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is the framework for providing multiple implementations
of TCP sockets in a single application. This patch just
adds the framework - upcoming patches will convert the
existing POSIX implementation to use this framework.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I07951e71f344dfe7689c818a13d7e7113c826643
Reviewed-on: https://review.gerrithub.io/400334
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add optional parameters to namespace creation to let the user pick the
namespace globally unique identifier and EUI-64.
Change-Id: Ia3eebaf22f8a64733a00a83f90cafb4977c2d07a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/399531
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ice343afdc84c2a11cd9026d128a35f7a62aa7125
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Reviewed-on: https://review.gerrithub.io/398933
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This will allow more parameters to be added to
spdk_nvmf_subsystem_add_ns() without breaking API/ABI compatibility
later.
Change-Id: I6b2f58f1a2d5fcd4c754830cbd4713dc461a31fc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/399519
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I69167825f054b58daf37840212289d6b99c8bb6a
Reviewed-on: https://review.gerrithub.io/400163
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This silences the output of 'make clean' when there is nothing to do.
Change-Id: I5cd89b8a2934162c932fc7b4acc6585e8d1dd4f5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/399926
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It is not ideal to have to add this in a bunch of
different Makefiles, but further consolidation of
Makefiles is going to be a more arduous process.
With this change, rebuilding SPDK after no changes
will result in no output - all of the "Nothing to
be done for 'all'" messages have been removed. Note
that DPDK build output still remains - this can be
suppressed by either using an out-of-tree DPDK, or
using SKIP_DPDK_BUILD=1 when using the in-tree DPDK
submodule.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib1d45432f2baaa1d9c1b9509906ee1e77966d3ca
Reviewed-on: https://review.gerrithub.io/399918
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The cpuset API is const-aware, so we can safely
return const cpuset here. This will simplify
future usages of this function - for now it remains
unused.
Change-Id: If849ed49056a54035fb7a6eccde84121630f9974
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/399457
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For now, this provides common abstraction for Linux epoll
and FreeBSD kqueue. It also provides the basis for future
changes where alternate userspace TCP stacks have their own
mechanism for polling a group of descriptors.
While here, remove old epoll/kqueue code in iscsi/conn.c that
was commented out when the iSCSI idle connection code was
recently removed - we now have a real implementation of it
in sock.c so the original code is no longer needed as a
reference.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I664ae32a5ff4d37711b7f534149eb0eb35942335
Reviewed-on: https://review.gerrithub.io/398969
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I2a3c7a272dc08be5a5ecb4339622816482c4cbb0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Stephen Bates <sbates@raithlin.com>
Reviewed-on: https://review.gerrithub.io/397036
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This provides an abstraction layer around TCP
sockets. Previously we just used fd integers, but
we don't want to be tied to integers for alternative
userspace TCP stacks.
Future patches will do more work to enable multiple
implementations of this abstraction. For now, just
get the abstraction in place for POSIX sockets and
make all of the iSCSI changes associated with it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9a825e9e02eb6927c8702d205665c626f57b3771
Reviewed-on: https://review.gerrithub.io/398861
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
The socket-related code was already broken out into
lib/net/sock.c, so break out the header portions
from include/spdk/net.h into its own sock.h.
This prepares for some upcoming changes in how
TCP sockets are abstracted, to enable alternative
userspace TCP stack implementations to be used with
SPDK.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I40b162e72ea80c235b49f10b17c2085fcfb385d4
Reviewed-on: https://review.gerrithub.io/398851
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie76019c2d5a82e24f0ec93b0c046fdbeea8bd337
Reviewed-on: https://review.gerrithub.io/398850
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Change-Id: I53ffdd061ba068070f66a752780229ecfe53e737
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/398688
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: I04820b2da1e75d1e84d3a5f4a274a11c9f154b82
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/398758
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id1e2a7da0db319c4d43988ec4991462fc956dde2
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/398542
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This section was deprecated in the previous release, and its removal
was planned for v18.04.
Users may configure the RPC listen address via the command-line '-r'
parameter.
Change-Id: Ic714417b87d422492b8742852c16983eb61793c2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/398239
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Instead of:
* spdk_vhost_scsi_dev_remove(vdev)
* spdk_vhost_blk_dev_remove(vdev)
we now have
* spdk_vhost_dev_remove(vdev)
All the logic is already handled internally. This patch only
changes the API. Also, previous vhost_dev_construct()/remove()
functions have been renamed to vhost_dev_register()/unregister()
because that's what they really do.
Change-Id: I7dd0d77bc5b633bec075e0a71345ddbed62697b4
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/396574
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
We already have a vhost subsystem and have to do
its fini anyway, so let's remove application fini.
Technically, any SPDK app can use vhost library
and create vhost devices, so we need to delete them
on shutdown in all cases - in module fini.
Change-Id: I013b45b4e73fd19288b9c10bc995dc24894ecf35
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/396573
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
This change will allow reusing this structure for both internal
and external xattrs as well as in functions having optional xattr,
but missing other options (i.e. snapshot, clone implemented in next patches)
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ia6619a75efa0a100168a6f8317be274823af04ab
Reviewed-on: https://review.gerrithub.io/396417
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add the section of boot partition support.
Change-Id: I81357d657f1a55376ab98b5ffab511c6227e43c8
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/397033
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I08043509aa2acef184c819948691c3ef7ea20e1e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/397643
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: I8ff60b4e071ad864496c65b8cf63984bb915e4f0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/397637
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ib3507a9e69b210cbd173c88d166025d4579e0149
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/397602
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Blobstore default cluster size is currently 4MiB,
but default lvol cluster size overrides it to 1GiB.
Additionally add -c flag in lvol tests to set cluster
size for tests.
1GiB was fine without thin provisioning, but we do not
want to allocate and copy 1GiB of data for newly allocated
clusters on thin provisioned logical volumes.
Note that 4MiB is same as default for Linux LVM.
lvol test case 601 had to be modified to create a malloc
LUN less than size of default cluster size. This test is
supposed to fail - without the change here, creating the
lvolstore would work, but the script still considered it a
PASS. Defer fixing that to a separate patch - for now just
keep the same test process.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ic05defbf8e641f613f0ec74175a37bc25986e496
Reviewed-on: https://review.gerrithub.io/397562
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
After the renaming of json_internal.h to utf.h, it doesn't make sense
for utf.h to include spdk/json.h.
Move the #include "spdk/json.h" to the JSON library implementation
files and remove it from utf.h.
Change-Id: I36092524c9b982fd2e931faf1b7c5d1d6a6c80c0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/397603
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ie6a651d0238d09729e28d5456a84ba090faeb465
Reviewed-on: https://review.gerrithub.io/391568
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Modified include/spdk/bdev.h and include/spdk_internal/bdev.h
add data members to capture statistics information. Modified
lib/bdev/bdev.c to calculate read/write latency.
Change-Id: Idcd55dd2e88c4b308e016f16ced53720256c79e3
Signed-off-by: Isaac Otsiabah <iotsiabah@us.fujitsu.com>
Reviewed-on: https://review.gerrithub.io/390654
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add api and unit test functions for
change number of blocks for provided block device.
Change-Id: I55d67c99375cb88bdaa79ce1a36d4298223beddc
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Reviewed-on: https://review.gerrithub.io/390802
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fixes github issue #218.
This patch introduces spdk_cpuset object to store and manipulate
the set of individual CPUs. The main objective of this object is
to replace cpumask declared as uint64_t and extend the limitation
of supported CPUs (lcores) above 64 CPUs.
spdk_cpuset is always allocated dynamically and accessed by opaque
pointer, what makes it easier to extend in the future without
breaking API/ABI.
This patch also extends parsing function allowing to set cpumask
using a list of cpus e.g. "[0-4,10,12]" sets mask of 0,1,2,3,4,10,12
as well as hexadecimal string with and without "0x" prefix.
Change-Id: I475c3ba7fab629021a22e03176e57e400dd24a49
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/390794
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fixes the build with CONFIG_LTO=y.
Change-Id: I3acbdd16c5ff44f50747644c09ca7b0228c790cc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/396449
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently, there is no possibility to save read only blob to disk.
This patch modifies behaviour so that read only flags are applied after syncing blob.
This is analogy to resize, set xattr and remove xattr operations.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Iffed601c78cb83231bb20e7ef05b73847dc3c95a
Reviewed-on: https://review.gerrithub.io/394243
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Idadd4eb7574b005cce8b888b28c8c3b6993343a4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/395555
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_vbdev_unregister() is part of internal bdev API,
yet bdev module that uses spdk_vbdev_register() directly
will not be removed correctly when using delete_bdev RPC.
spdk_vbdev_unregister() is now consolidated with
spdk_bdev_unregister().
This comes up when deleting lvol bdev, as it does not use
spdk_bdev_part_* functions.
base_bdev->vbdevs entry was not removed for bdev that lvs
is created on.
Additionally patch expands test to create lvol bdev,
after removing it using delete_bdev RPC.
With ASAN enabled this would report accessing
already freed memory previously.
Change-Id: I9547e83862e2daa50355d56a1c9f453aaa6cfdb8
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/395711
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously vdev->name was being allocated/freed
separately in virtio_pci and virtio_user backends.
Now it's all done in generic virtio library and
cleans up some code.
Change-Id: I810e976d09781c0c9b25c6f7fd957a83aad6c7b8
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/394704
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Some upcoming changes will effectively render this moot
anyways by adding an epoll/kqueue descriptor to poll
on in all cases (not just connections that have been
idle for 5ms).
The epoll/kqueue code was just ifdef'd out instead
of removed - some of this code will be useful
and reusable with minimal changes in the upcoming
patches.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0c354390537e6369cb3c32e78a59c300dec6d098
Reviewed-on: https://review.gerrithub.io/395553
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
This is just the API introduction. See subsequent
patches for its RPC usage.
Change-Id: Iadb7c9bf6a56ab4330c9f2215c6006a2935d208d
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/394445
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When the state change is known to fail immediately, use
a return code instead of calling the callback.
Most of the callbacks didn't actually check for errors,
so this patch also doesn't check for errors on return
codes. That should be done in the future.
Change-Id: I67e03f93d7f53892473dfc073f4150e7e620cad2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/394281
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Removing an LUN from an existing iSCSI target is possible by
removing the corresponding BDEV. However adding an LUN to an
existing iSCSI target is not possible yet.
Add a new function spdk_iscsi_tgt_node_add_lun() and related
functions first toward supporting this function.
JSON-RPC for this operation will be submitted an another patch.
Informing the newly added LUN to the initiator is not included
in this patch. Hence this operation is possible only for any
inactive target.
Change-Id: I3a28f4d75a17126e49c9d12ce64c3ad68f231840
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/385180
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In current bdev_virtio_scsi PCI enumerate callback
implementation we rely on a global variable - a global
list of virtio devices. We do not need any opaque
context data inside this callback just yet. It will
be required to add virtio devices in runtime. See the
next patch for details.
Change-Id: I116cbd3bd633f56922eedcc7c07b8c0310e51d49
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/394444
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This avoids having to dereference the spdk_bdev_io's
channel in the spdk_bdev_free_io() path.
Cleaning up after hotplug events should ensure that
all associated bdev_ios have been freed (not just
completed) before the bdev channels have been freed,
but this patch gives us some more wiggle room in this
area.
Results in a small (1-2%) performance degradation on
a bdevperf microbenchmark, but should result in no
noticeable difference on any real world workload.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id8b88300fc53e8c0b83309a738a4c3bd2aeaff52
Reviewed-on: https://review.gerrithub.io/394399
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
There is no need to keep a lun name anymore - we always
use the bdev name as the lun name so it is not providing any
additional value. This also keeps us from associating
the same bdev with different LUNs on different iSCSI target
nodes or vhost-scsi controllers.
Side effect of this change is:
1) Use "bdev_name" across the APIs to make it more clear
what these names refer to.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3d42fde22087352ce1d5dc80178bd8c5cac8cb7c
Reviewed-on: https://review.gerrithub.io/390843
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Modifies spdk_env_init() and spdk_mem_map_init() such that
they return on failure instead of terminating with exit()
or abort().
Change-Id: I054c1d9b2e46516ff53d845328ab9547f54bdbc4
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/393987
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
This is more efficient and buf_link users don't
need the extra flexibility that TAILQ provides.
link could also be changed to an STAILQ, but its usage
is not in the performance path so not touching that
as part of this commit.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7df2cc24a3784add8370db859003783e92cbfc21
Reviewed-on: https://review.gerrithub.io/393834
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This only adds the option and metadata flags.
Actual functionality will be added in an upcoming commit
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I66015f48f34d4c7c64fce1831ebaed134098407c
Reviewed-on: https://review.gerrithub.io/390196
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Added tighter regulations to the NVMe-oF nqn checking to conform with
the nvme 1.3 spec. including, adding checks for valid nqn's in the case
of a generic uuid based nqn and checking for reverse domain name and
colon prefixed strings in a user specific nqn. Unit tests included.
Change-Id: I3ee4b269d0655ac9968699617e43e3297695c7ed
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/393265
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This requires exposing struct spdk_io_channel in the
public header - mark it as internal with Doxygen
comments to make it extra clear that applications
should not use the data structure directly.
This is a very hot function in the main I/O path,
so making this function inline has a significant
performance benefit. A bdevperf microbenchmark
using null bdevs shows a 11% improvement.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I70e30e184000705704bb004e8da1c7476a6aceeb
Reviewed-on: https://review.gerrithub.io/393824
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Retrieve LUN data directly from struct spdk_scsi_lun rather than copying
them into struct spdk_scsi_task, and access the LUN via the task->lun
pointer.
Change-Id: Id8745f116bc559fb2f9e58811c2b9781c8cbdae8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393709
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The existing description was written long ago and is
not even close to being valid now.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I758da93bfbffc2edb28b7d421b5f061cbd893a39
Reviewed-on: https://review.gerrithub.io/393692
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
The SCSI layer no longer needs to know about the parent/subtask
relationship maintained by iSCSI.
Change-Id: Ia6f7c5367c5b656bd7521ed1abb6d0f713a0500b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393697
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
This patch remove need for additional buffer when translating error code
to string.
Change-Id: Iaa60088b5c450581d3cdddbb425119b17d55a44b
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/386114
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also added vbdev_get_lvol_by_unique_id function.
Change-Id: I55a64df008c23c0fedb8a59ef67e2c356097e780
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Reviewed-on: https://review.gerrithub.io/392658
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
