This went unused in the unit tests.
Tested with DPDK 19.08 and DPDK 19.11.
Change-Id: I738919379b5751697f9533f72fbaf77993cb6fb5
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477840
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
If a spdk_bdev_io cannot be completed, because it is sent to a zone that
is currently busy, reschedule its submission. This mechanism will be
used by appends, as mutliple append commands can be directed to the same
zone at the same time.
Change-Id: I60da2bd1835380812d22536ea275fb8fed9f8561
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477437
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds support for saving JSON configuration of the OCSSD
bdev module required to recreate the current state.
Change-Id: Iedbdb8b4a2b7dd02a223ce6f073553e71b9c040a
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469090
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
OCSSD bdev needs to keep track of some portion of zone's state (write
pointer, its capacity, whether it's busy) in order to support the append
operation. To achieve that, all the info needs to be retrieved for all
of the chunks and translated to zone format.
Change-Id: Id88282576aba337b50e7c7e1b9e9ff5aba25a3db
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468937
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added zone information command translating Open Channel's chunk
information to spdk_bdev_zone_info structure.
Change-Id: Ifdb15f2e0ea2fb8422810fa64f18942fcb6e4582
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468213
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added zone reset command. It's very similar to a regular data set
management deallocate command with the only difference being that it
operates on zones instead of blocks.
Change-Id: Iae4d77c6877b6906231336b13fad1167de149f20
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467920
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Add the unit test to verify the submitted list,
timeout IO poller and timeout IO check.
Change-Id: Ie7832cc29e19a624328a1a96cffe313bf9f18a69
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476051
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
The patch adds zone address to Open Channel LBA translation as well as
initial support for read and write commands. Each IO command is
currently limited to a single zone (chunk).
Change-Id: I3ee6d58323871f0651ac1d5e8dda28eb6d687a95
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467149
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Added a way to create and delete OCSSD bdevs on top of OC NVMe
controller. The controller can be created using the regular NVMe bdev
RPC call. For instance, the following (assuming 0000:00:04.0 is an
OC device):
rpc.py bdev_nvme_attach_controller -b nvme0 -a 0000:00:04.0 -t pcie
rpc.py bdev_ocssd_create -c nvme0 -b nvme0n1
creates Open Channel controller nvme0 and OCSSD bdev nvme0n1 on top of
it. The bdevs can be deleted either by the bdev_ocssd_delete call or by
deleting whole NVMe controller, in which case all bdevs are destroyed.
Change-Id: I9f2f02103fc5570a53bd26479c8690be206829c3
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468984
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add coverage to the path where we dequeue multiple ops for a
bdev_io and one of them has failed. Confirm that the bdev_io
gets failed.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ie864b63819f506da43fdcad960c26a48a01196c7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472417
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
A recent change in the CryptoDev API means that failure to enqueue
all attempted submissions does not automtically mean busy. We need
to check the status of the last submitted op and only retry if
busy, otherwise fail the IO.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I0873d07a430a08f5aee25581e47187ef60ba8542
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472400
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Previously we would sit in the submission routine and spin on the
poller and then retry in the event that we could not get CryptoDev
to take all of the ops that we had available.
The implementation was fine however a recent CryptoDev change
requires us to now check the status of attempted submissions
instead of assuming that the device was busy. If there was
another reason for the failure we don't want to retry or we'll
be stuck in an endless retry loop.
Changing the current device full handling to match what was
done in the compression vbdev makes it easier to handle the
new condition and also makes the two vbdevs more consistent
with regards to how they manage the DPDK framework API.
This patch only changes how we handle full conditions to put
the ops on a linked list and resubmit them the next tie the
poller runs naturally. A following patch will handle the
CryptoDev API change that instigated this change.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Idcb6e06b6826045f23e59b64eca051f3eee2b850
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472309
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The _ was supposed to indicate an internal function,
but really leaving off the spdk in the function
is the standard way to denote an internal function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I74facafb67b793502838b9c1b5f90aec2c88c69b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475033
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
We try to reserve the spdk_ prefix for functions that
are part of the public SPDK API.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0a95ba0f9db04b588a2e948427f8a9f53a7b5740
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475032
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This function is not part of the SPDK public API, so
remove the spdk_ prefix from it to make it more clear
this is internal to the SPDK bdev library.
Also add "channel" to the name since this function is
operating on the channel parameter.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I57897ab4bf601b90551259b7cf6efa63152ed02f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475031
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This is not part of the public SPDK API, so remove
the spdk_ prefix to make it clear this is internal
to the bdev library.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibda76e4d8e34dde0c2fe638cb965e5ba2d9e47b5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475030
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This function is not part of the SPDK public API, so
remove the spdk_ prefix to make that more clear when
reading the code.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5ea4c04c474a6cf0862f11921daa97c9df728e96
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475029
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Add registration and unregistration of block zoned bdev. Attach it to the
underlying bdev during creation and unattach at deletion.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I773aff6c7609952f28c02dd1794f0529a781b2e1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468033
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A recent change to the compression API means that we can no longer
assume that rejection from the API means that it was busy. We need
to only queue operations that were from the busy condition and
fail others.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I7fa5d27559eacdf1bdf6982bdc142939333076ae
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472465
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Also add functions to convert it to/from string.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I6f7964d832c308b815150fff39eb3dc5c5ae5853
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471079
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
When splitting bdev's, if we run out of child IOVs, we have to
make sure that we end block aligned. That may require us to
shorten or eliminate one or more child IOVs to be picked up
on the next split. If we eliminate enough such that there
are no IOVs for this split IO, just continue and the next
split completion will kick off another split to pick up
the remaining data to be transferred.
Fixes issue #981
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: If2bfbe5f0862295e1d74cbea00692890a2178967
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471313
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
When we ran out of child_iov space, ensure the iovs to be aligned
with block size. However the calculation was wrong.
(to_next_boundary_bytes % blocklen) meant not to_last_block but to_next_block.
So calculate to_last_block_size by reducing to_last_block_size from blocklen.
The data was collected when the issue occured. So add unit test
by using the data.
Fixes#979
Reported-by: Geoffrey McRae <geoff@hostfission.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I62a50bada450288ea7c60aec0e557c2a53cd8916
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470806
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Next commits in the series will need these callbacks in other tests
that are closer to the beginning of file.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I55e346f273f169c7894f662dcfa1f57a02024577
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469708
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Small cleanup in prep for future RAID levels and to improve
readability.
Change-Id: I66ae64320593ee5b242ccdc50a0041a4ec8207fb
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469742
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Test all 3 IOV positions but only on src bufs as the dst buf
code under test is identifal and the amount of test code is
rather large.
Change-Id: Idbb635149a5737df9d508adc9dba69e84ec024d3
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466157
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
To make next patch in this series clearer
Change-Id: I6654a92309b4b98351e3793439ecff1b10a24863
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467287
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
By moving the success test case to the end we avoid the scan-build
issue however the last test case was already testing success so just
udpated the comment and free the memory at the end.
Fixes issue #933
Change-Id: I0ca81f240d3af32c414b0c886fda5b14ba37e490
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467302
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In prep for replacing some of the internal r/w calls with function
pointers based on RAID level, just call spdk_bdev_io_get_buf()
directly in the submit path for reads. This:
* will reduce the number of places where unique calls to the
upcoming function pointer will be
* bring it in line with how the majority of other bdev modules look
* actually increase UT coverage by about 10% as we're now calling
spdk_bdev_io_get_buf() and it's callback.
Change-Id: I7e6da0dab80687988ba52f57b0d9e2dbf20676dc
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467538
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Removing queuing tests as they are really only testing mocked functions,
minimal coverage is gained here and the queueing logic from a UT
perspective is part of bdev, not a bdev module.
This is a prelude to adding RAID 1E which will start with abstracting the
RAID r/w functions and it may not look like it now, but getting rid of
this UT code will make the move to function pointers for r/w based on
RAID level a bit smoother.
Change-Id: I01eef2aa99b2bdd4308ddef9bad9dd1121ef7470
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467537
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Not any different from the test_env version in this patch but it will
be in the upcomiong series as the 2MB tests are added as we will need
to manipulate the size param.
Change-Id: I13a7544546b5296421fe5b696c8777e402bacc35
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466076
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Most of the assignments followed the DIRS-($(CONFIG_X)) pattern, but
there were a couple of assignments using a different pattern.
Change-Id: I7c80fec2813c32cb7676912d72805565f77b2e3d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466469
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds new interface for opening bdev and
implements new style remove event. With that changes
user can be notified about different types of events
that occur in regards to bdev. spdk_bdev_open_ext
function uses bdev name as an argument instead of bdev
structure to remove race condition where user gets
the bdev structure and bdev is removed after getting
that structure and before open function is called.
spdk_bdev_open is now deprecated.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I44ebeb988bc6a2f441fc6a0c38a30668aad999ad
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455647
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Scan-build on Fedora29/30 reports error, which this patch fixes:
bdev_ut.c:1436:17: warning: The left operand of '!=' is a garbage value
CU_ASSERT(desc != NULL);
~~~~ ^
/usr/include/CUnit/CUnit.h:123:30: note: expanded from macro 'CU_ASSERT'
{ CU_assertImplementation((value), LINE, #value, FILE, "", CU_FALSE); }
^~~~~
bdev_ut.c:1654:17: warning: The left operand of '!=' is a garbage value
CU_ASSERT(desc != NULL);
~~~~ ^
/usr/include/CUnit/CUnit.h:123:30: note: expanded from macro 'CU_ASSERT'
{ CU_assertImplementation((value), LINE, #value, FILE, "", CU_FALSE); }
Fixes#924
Change-Id: Ia7dc6ce066ac80fc45f022eefd43a224d2f11503
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466110
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In prep for testing the 2MB boundary condition multiple changes
were needed:
* update mocked mbuf function for chaining
* init next pointer to NULL during mbuf allocation
* set and check expected physcal addresses in _compress_operation()
* init iovec values in test routines to more sane values
Change-Id: Icff030e8bef693952f7da66e7aae77e207fbfd40
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465983
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Present since the refactoring on driver init function.
Change-Id: I5b2877f4278b62a9efa53395f6910ef199f2c100
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465981
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Will be needed to add specific tests for crossing a 2 MB boundary
later in this series.
Change-Id: I7404a019ff2f837f54ffdef39c6219e86aa258f1
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465968
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Remove code that was freeing memory in the code under test. It was
no longer needed following a refactor of the init code and was
causing a double free.
Change-Id: I99018587ac12e01d4fe950e0718c23790ce7ce41
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465966
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is a part of a change that will introduce
new spdk_bdev_open_ext function. This will make
possible to pass callback function while opening
bdev which will be called when some bdev events
occur.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I3e552edd5c90dacd39885e75e9114e48dddf50ea
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463157
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Some lines in this file are long and should be broken
as bdev/raid/raid_rpc.c was done recently.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I98a7f965b7230f32ab6a2d33a0f204591fa92ac1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464484
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Ordering stub definitions by libraries or modules will be a little
easier to read.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7568c94691229188c348a9c5e3fba8f2bc1ecf04
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464483
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use cached pointer to g_io_output in IO verification to improve
readability.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I71ced5d1e438d5046b9a5913a1a2860f8435d79b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464485
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Create a helper function set_io_output() to setup expected IO output.
Besides change the name of cached pointer to expeced IO output
from p to output because p is ambiguous.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7574bf8362f7c5d7841e08b4fbd9a9b66836012a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464482
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
create_construct_req() had been located just above raid_bdev_init().
However this location was not intuitive. Hence move create_construct_req()
to just above spdk_rpc_construct_raid_bdev().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia5998146ce7b4b9a3c3bdeb38b6dbc8dd21fa276
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464481
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Create a helper function create_get_raids_req() and move duplication
of category name and initialization of related global variables into
the function. Some operations are re-ordered accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I03e12e8d77872634a65a94b4cd4092554e376b13
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464480
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Create a helper function create_destroy_req() and move duplication
of bdev name and initialization of related global variables into
the function. Some operations are re-ordered accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I60f01103faec3ec7ec6c317470b043f84187a4c1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464479
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Create a helper function create_construct_config() and move
create_test_req() and initialization of related global variables
into the function.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia675f67e8332247cce4585a2d287b8062d4e1359
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464478
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Create a helper function create_construct_req() and move create_test_req()
and initialization of related global variables into the function.
The next patch will create an another helper function
create_construct_config() and move create_test_req() and initialization
of related global variables into the function.
Hence move the common part of create_construct_req() and
create_construct_config() into create_test_req().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6852fdc7966359a1029c809565ceb7230b749dc6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464477
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
snprintf() do not write more than specified bytes including the
terminating null byte. If the output was truncated due to this limit
then the return byte is the number of chars excluding the terminating
null byte.
So remove NULL byte appends after snprintf() in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic5b7719791721c6ae7b1dd8367be454b34df0fe5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464476
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Some places had used dynamically allocated strings but they were
just duplicated from string constants. Hence we change them to
use string constants to make refactoring easier.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0a5c4c1a72ee4aede12703c2dd50057c47098e28
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464475
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This simplifies the UT code a little bit.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8aae0a8f0b0aa7e931ed4303b9504feabf76e2b0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464358
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Data type of number of base bdevs are corrupted. uint8_t is enough
and unify almost all related variables into uint8_t.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I323aaa229a76c3d5b5361d7643c3a9591ccad340
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464357
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If available, if not use the bdev unique name. This results in
a much friendlier comp_bdev naem for the user. For example,
now it would look something like this: COMP_lvs0/lvs as opposed
to like this COMP_0b149b31-b66b-4cf7-ab39-a55b50788cd1
Change-Id: I319a141221ed8880edcec930ca5be9f256b105e0
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463246
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
bdev_ut.c:1300:17: warning: The left operand of '!=' is a garbage value
CU_ASSERT(desc != NULL);
~~~~ ^
Change-Id: Ie87cd4d7218a380e61616a83f3a9bceccc0798cb
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463258
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
bdev_ut.c:1863:2: warning: Potential leak of memory pointed to by
'histogram'
poll_threads();
^~~~~~~~~~~~~~
We used to free g_histogram instead of histogram. Those
should be the same thing, but scan-build gets confused.
Change the code to free histogram - this should also make
it slightly easier to read.
Change-Id: Ifaad1c2d9c7f9cc1a106f6edf3d22b54e42fe867
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463256
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Pointer passthrough g_histogram and histogram implicitly ,but the checker
still complains about this, change to spdk_histogram_data_free(histogram)
directly, no need any assert any more.
bdev_ut.c:1486:2: warning: Potential leak of memory pointed to by 'histogram'
poll_threads();
^~~~~~~~~~~~~~
1 warning generated.
Change-Id: I609c1c92643ad03b8e3c62cd8434882e7942efa4
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462789
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
On Fedora30, GCC9+ reports errors:
Issues report:
vbdev_compress.c:482:17: warning: Assigned value is garbage or undefined
comp_op->m_src = src_mbufs[0];
^ ~~~~~~~~~~~~
vbdev_compress.c:502:17: warning: Assigned value is garbage or undefined
comp_op->m_dst = dst_mbufs[0];
^ ~~~~~~~~~~~~
vbdev_compress.c:491:3: warning: 1st function call argument is an uninitialized value
rte_pktmbuf_attach_extbuf(dst_mbufs[iov_index],
compress_ut.c:826:2: warning: Attempt to free released memory
free(g_mbuf_mp);
^~~~~~~~~~~~~~~
Should remove free(g_mbuf_mp), for pointer exchange.
Change-Id: I1a48b7c309a4e2aa0aa513f9be44ae3504d9e385
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462574
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Also made on the prints a DEBUG message instead and noticed the really
name that was being registered by this component so updated it to
make it look like the rest of SPDK.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I747a846cb365e7db49be50db941e83fb1b265ea0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460244
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Required due to recent changes to functional code, unclear how
the UT passed without these.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I3ea4401ee1842ef577793338f1567d20d73ad8bc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459868
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_jsonrpc_begin_result() will be refactored to always
return non-null in subsequent patch and those raid tests
will no longer make sense, so we remove them now.
Change-Id: Ifd4570af4daab9c96cd8701440366e292f879204
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459659
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Issue reports:
bdev_ut.c:1486:2: warning: Potential leak of memory pointed to by 'histogram'
poll_threads();
^~~~~~~~~~~~~~
1 warning generated.
Add Tear down the channels like other tests in this file.
Change-Id: Iaeff93ec6f17716dfb7638cf4dd5f6cfe2c2de06
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459939
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This fixes error on scan-build on Fedora 30, which assumes spdk_bdev_open()
is called from non-SPDK thread - failing before allocating spdk_bdev_desc:
bdev_ut.c:1766:17: warning: The left operand of '!=' is a garbage value
CU_ASSERT(desc != NULL);
This is related to issue #822.
Change-Id: I8ee2112bb4d71aafc93d63bddca083c009ec11f3
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459755
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Compilation Warning on fedora30.
bdev_raid_ut.c:659:13: warning: Array access
(via field 'base_channel') results in a null pointer dereference
CU_ASSERT(ch_ctx->base_channel[index] == g_io_output[index].ch);
^~~~~~~~~~~~~~~~~~~~~~~~~~~
bdev_raid_ut.c:2181:14: warning: Array access
(via field 'base_channel') results in a null pointer dereference
CU_ASSERT(ch_ctx->base_channel[j] == (void *)0x1);
^~~~~~~~~~~~~~~~~~~~~~~
This is related to issue #822.
Change-Id: I9fd066b16e9f4c1fedc95403d2ac6e609f862c65
Signed-off-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460094
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Here is the an example to describe existing issue:
There is a Write request with 64KiB data length, and this IO is cross the IO
boundary. We assume that the parent IO will have 2 children requests, one is
33KiB length, the other one is 31KiB. Here is the view of parent iovs, the
first 33KiB length data has 33 iovs:
iov.[0].iov_length = 1024;
.
.
iov.[31].iov_length = 256;
iov.[32].iov_length = 768;
.
.
iov.[64].iov_length = 1024;
In function _spdk_bdev_io_split(), then you can see that for the 33KiB length
child request, exiting code will run out of child child_iov space and return
error due to last one data buffer is not block size aligned.
Here we can rewind the existing offset to last block size aligned buffer to
avoid the error case, for backend which need aligned data buffer such as
AIO backend, the request will go through spdk_bdev_io_get_buf() again to
do the data copy, otherwise for those backend devices such as NVMe with
hardware SGL support, 256 data segment is fine for them.
Change-Id: I96ebdf29829d86f9b38fab28a7406eedc9fa44ef
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453604
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
If bdev is configured to use separate buffers for metadata transfer,
but it doesn't support the write zeroes command, pass empty zeroed
buffer to make sure the metadata is cleared out as well.
Change-Id: If6f024266067e5764a28a276296f651d31da4792
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457628
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Starting with this patch it is possible to remove a
snapshot if there is only a one clone created from it.
In such case snapshot can be removed without any data
copying. This is achieved with following steps (case
with only one clone):
1. Open snapshot (Snapshot1) that shall be removed
2. Check if the Snapshot1 has no more than 1 clone (Clone1)
3. Remove Clone1 entry from Snapshot1
4. If the Snapshot1 has a parent snapshot (Snapshot2):
4a. Add Clone1 entry to the Snapshot2 clones list
4b. Remove Snapshot1 entry from Snapshot2 clones list
5. Open Clone1 blob
6. Freeze I/O operations on Clone1
7. Temporarily override md_ro flag for Snapshot1 and Clone1
for MD modification
8. Merge Snapshot1 and Clone1 clusters maps into Clone1
clusters map
9a. If Snapshot2 is present switch parent ID and backing
bs_dev on Clone1
9b. If Snapshot2 is not present set parent ID to
SPDK_BLOBID_INVALID and backing bs_dev to zeroes_dev
10. Sync MD on Clone1
11. Sync MD on Snapshot1
12. Restore MD flags for Clone1 and Snapshot1
13. Unfreeze I/O on Clone1
14. Close Clone1 blob
15. Remove Snapshot1
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I800724b981af894e01e1912d0077c5b34a2ae634
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445576
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Existing code in spdk_bdev_write_zeroes_blocks() will call spdk_bdev_free_io()
for the error case, which will cause assertion because the bdev_io isn't
submitted to the backend yet, so we will check the condtion first to
avoid the error case.
Change-Id: If27d78217f709a3315e74c00869d345abd6b9a69
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453491
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Adding these tests identified a small fix in the code under test
that is also included here. The compressdev 'produced' field
is unsigned and reduce is expecting a negative errno in the
callback.
Change-Id: I28ab11ee3ef54768a9d6ccd26282cf7dd022be43
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454806
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When parent IO was splitted into several children requests, SPDK
may return parent completion callback with error status before
all the children requests are finished.
Change-Id: I63221a0ae1a5925a7fcd9744b4f5d8079c641252
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453611
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
For UT there's no additional value in having more than 2 raid
devices, the value in having > 1 is in confirming the array
structures via create multiple and verify expected raids were
created.
Change-Id: I874b76644ccfc7d9dd307fbb179b35673b7bacc9
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454508
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
I'm testing the error paths within each function under test, this
was here simply because I copy-n-pasted much of the UT framework
from crypto to get it jump started.
Change-Id: Id7705bcaec87e93b589360e520b330f024d3293d
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452723
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Note that much of the vbdev module is still WIP including this
function (ex there are rc checks at the end when nobody yet sets
an rc) but I want to catch up on UT before adding more new code,
or at least get close.
Change-Id: I4617c215fed9fe35a68dcc5e7ebc93e48588cf5b
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452715
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Aas well as general test setup required for this one, additional
mocks, etc.
Had to add some asserts to make scan-build happy although I don't
see how these changes stimulated those failures.
Change-Id: Ief08f9b71ee7a836f6026d26517f5faa5f9d51ce
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451688
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Test multi vector command that needs to be split by strip and then
needs to be split further due to the capacity of child iovs.
Add a case that was not tested before. In this case, the length of the
rest of iovec array with an I/O boundary is the multiple of block size.
Expect the rest of iovec array to be submitted in the completion of
previous iovec array.
Change-Id: I5b95b1f1884a73b31709b2fd9187a8a9e9b2cd0b
Signed-off-by: lorneli <lorneli@163.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452414
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Unclear why they were here to begin with.
Change-Id: Ic9b896796a9c56552972e3ef8075934d4b3f6497
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454515
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
No additional value in randomizing read vs write, which raid and
which channel. Still do read and write but fix the other values.
Change-Id: I5a4f023731119230d3eb49ae28421819144b90bc
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454509
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Having a varying QD in unit test isn't adding any value, the same
code is being executed N times with no specific assertions on the
difference between queue depths. Qdepth testing will be looked at
in system test as an opportunity to increase SW quality.
Change-Id: I5328a43f57cbfa2afc9145c828b6e968dcab310d
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454507
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For test setup only, each time a UT would run several params, like
the number of drives in the test, would be based on a random value
which is not optimal for UT. This patch just selects a reasonable
fixed values and uses them every time.
This can save up to 4 seconds per run depending on the values that
were randomly chosen (worst case) vs what is in this patch.
There is value in some read/write test cases in using different
strip sizes however. Enabling multiples values for the tests where
it adds value will come in following patches as will removal of
more random numbers like # of channels.
Change-Id: I1b9d44b70ae81af0dcf53ae4a56e31c9c9add39e
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454505
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
General cleanup, first in a series of patches coming soon...
Change-Id: Ibed727559af22c6febb1aad2bb8320a765814144
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454371
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch changes UT so that bdev modules have async init.
It demonstrates issue with triggering assert in init path,
when bdev modules are reinitialized multiple times.
Change-Id: I9b2b16d8ac53bac6a929f6929ceedb70b250c500
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454618
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
In working on a future patch to queue compress operations, I found
some corruptions in our mbuf pool stemming from an inconsistency
in using mbuf macros when constructing a compress operation and
how we allocated and freed both the pool and the mbufs.
This also fixes an issue that I hadn't addressed yet with freeing
chained mbufs. Use of the mbuf macro to free them instead of the
generic spdk functions takes care of that for us.
Change-Id: I7b29a0d740ab745574698c721d575d8a735ad5cb
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453028
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
On init, we pass reducelib the address of our params structure
so that the volume size is updated accordingly. On load however,
there was nothing to set the volume size so any load of a previously
created compress volume would result in a 0 length bdev.
Change-Id: I7643c79fa2e664115fd25df064ff1c74d82e358b
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452906
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The product_name for raid bdevs was "Pooled Device" which was a legacy
naming convention that hadn't been cleaned up yet. This changes the
naming to be up to date with the current naming scheme.
Signed-off-by: Mike Carlin <mikefcarlin@protonmail.com>
Change-Id: I9092a2b793e48bb9ec0349087a31fdcde17ed9cd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452269
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was not used by any of the trace register descriptions.
Let's remove it rather keeping it around if we don't need it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idda809e2911db5be555ff6aa13695484a14bf665
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This requires changing arg1_is_ptr to arg1_type.
We will use this to print the first 8 characters of
a blobfs filename when collecting event trace data.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1b321d99145e82b42dcf6d901ce9d6298158edae
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452259
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch won't fix issues related to the need for the latest
ipsec with 19.02 but it is needed for that patch to pass.
Change-Id: I8e2d984d85b355d88edfb9c90c159c8aa0a5362d
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451788
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Bdev descriptors could be closed only from the same thread
that opened them. This restriction was suddenly introduced
at one point without making sure all the SPDK code respects
it. Vhost can still close descriptors from any arbitrary
thread and fixing that would require some more effort.
With this patch we remove the thread-specific assert from
spdk_bdev_close() and hence allow vhost to work properly
in debug builds. Vhost can still have a possible data
race with bdev hotremove notification, but let's get rid
of the abort() from the usual code path first.
Change-Id: I6fac66a5ebc907b1c5418fff618f0b64cd9b69f4
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451561
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We used to wait only for those descriptors which
specified the hotremove notification callback. The
bdev could've been removed before the descriptor
was closed and the subsequent spdk_bdev_close would
simply segfault.
This patch modifies spdk_bdev_unregister to always
wait for all descriptors to be closed before actually
unregistering the bdev. This consolidates the bdev
unregister behavior for descriptors with and without
the hotremove callback.
Change-Id: I9b358209c6abd301b6fe8660e27bc6fa4ef485d6
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450175
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Disabled temporarily earlier to get to basic functionality, circling
back now to begin work on UT again.
Change-Id: Ie7606f91072257f392727bdecc5f1eac26380453
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451063
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is a preparation to add completion callback to the
destroy_raid_bdev RPC.
Newly added callback parameters are passed to spdk_bdev_unregister()
in the end. This patch adds just parameters and the next patch will
utilize them.
Change-Id: Ic239c55872c0c69f3d1625eaccdb91a32a9d4d30
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450572
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Configuration lists in RAID bdev are unlikely to be exposed outside
of the RAID bdev module. Hence simply the prefix g_ will be enough
to clarify they are global data structure in RAID bdev module.
Change-Id: I9df88db8fa651d5af7d771d88ff04bb5997079c9
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450563
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
We didn't call teardown_test() in "unregister_and_close"
test case, causing the subsequent test case to fail
to register the same io_channel. This didn't cause any
issues, as spdk_io_device_register() silently returned
if the same io_device was already registered. However,
there was an extra error message printed and this patch
gets rid of it.
```
Test: unregister_and_close ...passed
Test: basic_qos ...thread.c: 850:spdk_io_device_register: *ERROR*:
io_device 0x55555576e4e0 already registered (old:0x555555770ab0
new:0x55555d7a14d0)
passed
```
Change-Id: Ib554612df8985c9d99b46b71bb76020f52565362
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450111
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: I683ea366da7bb186f16a8084a9c43276ed4fce04
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449798
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This API had good intentions, but as more complicated
use cases came up where base bdevs could come and go,
we've realized that the bdev layer will need another
mechanism to query bdev modules on these types of
relationships between a virtual bdev and its base
bdevs. We removed all code related to tracking
the array of base bdevs a long time ago.
Change all existing callers to use spdk_bdev_register.
Document spdk_vbdev_register as deprecated for now,
and change its implementation to just call
spdk_bdev_register for simplicity sake.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3b40ed96480c0fa7184db42953a9f4e4c167fed1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450076
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Test functions to be added later in series
Change-Id: I96286b6214b4577df334d180e7c3d641e8ce8f68
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445371
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This test allocates ridiculous amounts of memory for certain
random seeds. This test doesn't benefit from the extra queue
depth, or the larger I/O sizes, so just pick more reasonable
numbers that suffice for this unit test.
Some of the failing seeds in the test pool resulted in >30GB
of total memory allocated, according to valgrind.
Eventually we need to remove the randomness from all of the unit
tests, but at least this gets us past this intermittent failure.
Fixes issue #692.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia882fda8ef449c8537f76c878008aaf469ae7bd7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448193
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
io_types like FLUSH and RESET are not always supported
by base bdev modules. For example: virtio_blk bdev doesn't
support FLUSH; ocf or ftl vbdev doesn't support RESET.
Change-Id: I569ea75f8242c8bf082d7d89996ad1c7b1791570
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446493
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
FLUSH io_type shares a same process with UNMAP, except
that in the end, it calls spdk_bdev_flush_blocks function.
Change-Id: I4529bf29b7cd9f16d10f2edc99a20d25213c9c71
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446492
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Default 'unmap' option stays as it was.
'Write_zeroes' comes useful when one wants to make sure
that data presented from lvol bdevs on initial creation presents 0's.
'None' will be used for performance tests,
when whole device is preconditioned before creating lvol store.
Instead of performing preconditioning on each lvol bdev after its creation.
Change-Id: Ic5a5985e42a84f038a882bbe6f881624ae96242c
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442881
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When the specified buffer size to spdk_bdev_io_get_buf() is greater
than the permitted maximum, spdk_bdev_io_get_buf() asserts simply and
doesn't call the specified callback function.
SPDK SCSI library doesn't allocate read buffer and specifies
expected read buffer size, and expects that it is allocated by
spdk_bdev_io_get_buf().
Bdev perf tool also doesn't allocate read buffer and specifies
expected read buffer size, and expects that it is allocated by
spdk_bdev_io_get_buf().
When we support DIF insert and strip in iSCSI target, the read
buffer size iSCSI initiator requests and the read buffer size iSCSI target
requests will become different.
Even after that, iSCSI initiator and iSCSI target will negotiate correctly
not to cause buffer overflow in spdk_bdev_io_get_buf(), but if iSCSI
initiator ignores the result of negotiation, iSCSI initiator can request
read buffer size larger than the permitted maximum, and can cause
failure in iSCSI target. This is very flagile and should be avoided.
This patch do the following
- Add the completion status of spdk_bdev_io_get_buf() to
spdk_bdev_io_get_buf_cb(),
- spdk_bdev_io_get_buf() calls spdk_bdev_io_get_buf_cb() by setting
success to false, and return.
- spdk_bdev_io_get_buf_cb() in each bdev module calls assert if success
is false.
Subsequent patches will process the case that success is false
in spdk_bdev_io_get_buf_cb().
Change-Id: I76429a86e18a69aa085a353ac94743296d270b82
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/446045
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
There are some cases that virtual bdev open and close
the device and QoS will be disabled at the last close.
In this case, when a new bdev open operation comes again,
the QoS needs to be enabled again.
Change-Id: I792e610f4592bad1cac55c6c55261d4946c6b3e2
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442953
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
It seems like DPDK 19.02 has split the "session mempool"
into two separate mempools but this isn't really described
in the DPDK release notes, so this patch only makes our
crypto code behave just like DPDK crypto examples.
rte_cryptodev_queue_pair_setup() no longer accepts
a separate mempool parameter but instead requires it
to be passed through a new field in struct
rte_cryptodev_qp_conf, which is also passed as a param
to rte_cryptodev_queue_pair_setup(). It's referred to as
"session private mempool" instead of "session mempool",
which makes some sense since we already use
rte_cryptodev_sym_get_private_session_size() (with the
word "private" in name) to calculate its size.
The other mempool - "session mempool" - now has to be
allocated with rte_cryptodev_sym_session_pool_create()
instead of regular rte_mempool_create().
Change-Id: I3bc6185855988b864ca59bc1972beaf4f7ea8925
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443738
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch refactors driver init and in doing so eliminates the mem
leak described in the GitHub issue. Also it is now consistent with
how the pending compression driver does init.
Fixes#633
Change-Id: Ia2d55d9e98fb9470ff8f9b34aeb4ee9f3d0478f5
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442896
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Bug introduced when some fixes for DPDK 19.02 were added.
Fixes#659
Change-Id: I5ef9ce6a5e30591fc7d2aeaa8d398effe42888f6
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/444449
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Currently, the SPDK_BDEV_REGISTER_MODULE() macro uses __LINE__
to generate functions like spdk_bdev_module_register_187().
Typically, this is not a problem as these functions are not called directly
rather, they are only used as constructor functions to load the bdevs during
system startup.
There are languages however, (e.g rust) that require these functions to be
referenced explicitly to prevent them from being removed during the linking phase.
In order to reference them, having the names predictable (and potentially
changed per commit) makes things easier.
Change-Id: I15947ed9136912cfe2368db7e5bba833f1d94b15
Signed-off-by: gila <jeffry.molanus@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/443536
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
DPDK 19.02 requires this mempool to be allocated via
crypto-specific function which returns rte_mempool.
To keep the amount of #ifs minimal, we'll use rte_mempool
unconditionally.
Change-Id: I3a09de41e237e168580bb92b574854e291e68a74
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443785
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
mk/spdk.unittest.mk already includes mk/spdk.common.mk, so it's
not needed. This also fixes an issue where touching an included
.mk file would not trigger unit tests to rebuild if they had
this duplicated mk/spdk.common.mk include.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I41a04eb77ce468849cb9b53bd1f76df6fec06e46
Reviewed-on: https://review.gerrithub.io/c/443980
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Those were added to allow us mocking DPDK functions
originaly defined as static inline. They are based on
a fixed DPDK version and currently require a lot of
effort to update for DPDK 19.02+. There's a different
way of mocking them:
> #define rte_crypto_op_bulk_alloc mock_rte_crypto_op_bulk_alloc
> static inline unsigned mock_rte_crypto_op_bulk_alloc() { ... }
This patch uses the above method to mock all static
inline functions before including the crypto source file
in crypto_ut. As a result we can get rid of the rte_
header copies from SPDK, which greatly reduces the
effort required to make crypto_ut work with DPDK 19.02.
Change-Id: I0f07a9ff4f1c63036e058dffd3fcf0c21e77bff3
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443592
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In the next patch we'll e.g. move the vbdev_crypto.c
include after some of those functions, so move them
to the very top of the file now.
Change-Id: I1abaf724ea10c8c6d461663ba3be0a5a37b34f4e
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443591
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The buffers are allocated and freed inside the
test suite, but aren't used for anything.
Change-Id: I341dc3315d20d15f7b571e9d18438c98a74def11
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443589
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Modify existing code of parsing primary partition table to support parsing
the secondary.
Main difference of these two tables is that they have inverse buffer layout.
For primary table, header is in front of partition entries. And for secondary
table, header is after partition entries. So add helper functions to extract
header and partition entries buffer region from primary or secondary table
based on current parse phase.
Split the exported funtion spdk_gpt_parse into two functions spdk_gpt_parse_mbr
and spdk_gpt_parse_partition_table. So spdk_gpt_parse_partition_table could be
used to parse both primary and secondary table.
Change-Id: I7f7827e0ee7e3f1b2e88c56607ee5b702fb2490c
Signed-off-by: lorneli <lorneli@163.com>
Reviewed-on: https://review.gerrithub.io/c/441200
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is intended to avoid a crypto failure when we have ASAN disabled.
In order to appease a scan-build error, we have to assert that the
memory address for two g_io_ctx->cry_iov.iov_base is different between
runs of _crypto_operation_complete. However, when we have asan disabled,
two subsequest calls to spdk_dma_malloc yield the same address, so
change the alignment to prevent allocating the same address.
Change-Id: Ia3dfbec5bb16d00bbe7dc136a886e0b9caea71a7
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442413
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
In patch fbec702944 (bdev/crypto: Set QAT alignment
requirement) we added an alignment requirement for I/O
buffers, but the internally-allocated buffers for
encryption haven't respected it.
We now allocate those buffers with the crypto bdev's
required alignment. It is only required for QAT and we
do it unconditionally, but we don't want to strcmp the
driver name in the hot I/O path just for that - the
code is to be refactored anyway.
Change-Id: I2cbc04408ddc5574f212b63536a05eb73ceba104
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441908
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Some users require to do write zeroes operation when
erasing data on lvol. Currently the default method is
unmap. This patch adds flag to spdk_rpc_construct_lvol_bdev
call that changes default erase method. This is also a base
implementation for possible future function for erasing
data on lvol bdev.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I8964f170b13c2268fe3c18104f7956c32be96040
Reviewed-on: https://review.gerrithub.io/c/441527
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This patch adds the support of read and write separate
bandwidth rate limits control with the configuration file.
Below is the example (in MiB) for the configuration section:
[QoS]
Limit_Read_BPS Malloc0 100
Limit_Write_BPS Nvme0n1 200
Change-Id: I0221516ce70c3fbb07b9e80c1c814ed5ba271c88
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/416672
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We know how big this should be so no need to dynamically allocate it.
Change-Id: I00ae6cb7c7f525d946d213e0f58cc5fe05bcf932
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441128
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added set_read_only_lvol_bdev() RPC that marks
lvol bdev as read only.
This enables to create clones off of a base lvol,
without having to create additional lvol bdev with snapshot.
Change-Id: Ic20bbcd8fbebcef157acce44bfa1da035b0da459
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440534
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ib9de83db429e4ae6f8e0cc988ca161cebdb27c9c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/437599
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Check my_lba in gpt's primary header equals to LBA1.
Set correct my_lba in unit test to pass the test, and update
related header_crc32.
Change-Id: I124a7a883e9304bd3955ce3de6b589596c4195ea
Signed-off-by: lorneli <lorneli@163.com>
Reviewed-on: https://review.gerrithub.io/c/439889
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added -ffunction-sections / --gc-sections to allow the linker to remove
unused functions when linking test executables. This reduces the number
of required mock definitions to those actually required by tested code.
Change-Id: I22725ce82e22675a7c2d28c8227e586f2cd65023
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/436319
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is useful for proving to scan-build that we are not using a mocked
function. Sometimes it needs to be called repeatedly every time any mock
variables are called.
Change-Id: Id0ef196620c2984252f792a7e40162e10b989748
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/437997
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
It is probably best to clear the pointers to global memory when those
pointers are no longer valid. It also helps make the unittest a little
bit clearer.
Change-Id: I73f9568f40ba8bff63f4e3346c83a48766f26129
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/437991
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Modifed scripts/detect_cc.sh to take additional parameter specifing
the linker to use. Default to LLD on FreeBSD systems.
Change-Id: Idf97e9676a144028c0803d272ae6f0e903b0dd1f
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/438801
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since division is more expensive than right shift operator, in
function spdk_bdev_bytes_to_blocks, use right shift instead of
division if the blocklen of bdev is a power of two.
Change-Id: Ib3dbc792e86582bba30b3dc028efbd12c69075ba
Signed-off-by: lorneli <lorneli@163.com>
Reviewed-on: https://review.gerrithub.io/438318
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The scan-build error this fixes assumes that we do not reallocate an
iov_base for the g_bdev_io object in between calls to
_crypto_opration_complete. So I explicitly tell it that's what we are
doing.
Change-Id: Ie15c517ea60a2a527a0520005cb044ab2ba4412e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/437988
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
This is the callback type used for message passing. The
old name is easy to confuse with the callback to pass
a message to a thread or the upcoming callback to
spawn a thread.
Change-Id: I5fd63b57c4be2a4262a197850e6de4901be03ee7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/435941
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk.unittest.mk includes spdk.app.mk, but some unit test
Makefiles include both spdk.unittest.mk and spdk.app.mk,
meaning spdk.app.mk gets included twice. Fix that.
This hasn't been an issue because spdk.app.mk currently
only includes variables - but no rules.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I23d39e8084f79442fb06ae9b5a6a68d6134adff4
Reviewed-on: https://review.gerrithub.io/434281
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Considering it's the part base object that's now accessible
in its remove callback, we can simplify the part API by making
it accept the part base object directly.
Change-Id: I87c3278929a063c115828d02e0def7fa536e6682
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/434835
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Initial implmentation had a 1:1 session to crypto op ratio. After
working with a similar concept in CompressDev checked to see if
this was required and apparently it is not.
Saves a decent number of API calls per crypto op and in the poller.
Also saves on mempool usage. Performance improvement measurement
is WIP.
Change-Id: I73f2355e720a16fd46bc4a02657419f779f07cbb
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/433726
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
No longer override the send_msg implementation.
This updates ut_multithread.c, which has minor ripple
effects into bdev_ut.c. But that unit test is otherwise
unchanged.
Change-Id: I2fd30a1010bdff0a810d376d985ab1b8a2b22fb9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/424262
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Idcfb328a26fc85f3c144da9c27086a71c00d0d46
Reviewed-on: https://review.gerrithub.io/427830
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Previously there was no consideration for IO that were outstanding
to the crypto device when handling a reset. This patch makes sure
that those IO are completed with FAIL status prior to completing
the reset that we pass down the stack.
It does so by sending down the reset first and in the completion
using spdk_for_each_channel and the poller to quiesce each channel
allowing the crypto side to complete all IOs before we finally
complete the reset IO after the last channel is quiesced.
Resets are tracked on a per bdev basis.
Addresses github issue #449.
Change-Id: Iadb07bada1fcaad33d9f224a60d983a7eb835236
Signed-off-by: paul luse <paul.e.luse@intel.com>
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/428552
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We need additional mocks for structures that were added
in the most recent DPDK release to make our unit tests
build properly.
Change-Id: If6e471528d4cb1dce24fb5d910e9e545fcdaa0f6
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/429987
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Large read I/O will be typical in some use cases such as
web stream services. On the other hand, large write I/O
may not be typical but will be sufficiently probable.
Currently when large I/O is submitted to the RAID bdev,
the I/O will be divided by the strip size of it and then
divided I/Os are submitted sequentially.
This patch tries to improve the performance of the RAID bdev
in large I/Os. Besides, when the RAID bdev supports higher
levels of RAID (such as RAID5), it should issue multiple
I/Os to multiple base bdevs by batch fasion in the parity
update. Having experience in batched I/O will be helpful
in the future case too.
In this patch, submit split I/Os by batch until all child IOVs
are consumed or all data are submitted. If all child IOVs are
consumed before all data are submitted, wait until all batched
split I/Os complete and then submit again.
In this patch, test code is added too.
Change-Id: If6cd81cc0c306e3875a93c39dbe4288723b78937
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/424770
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Splitting IO in the bdev layer is a little complex and increasing
the coverage in unit tests will be good.
Change-Id: I9d42cedc795b2804a472bdc310e936135c424fd3
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/427948
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Expected values are managed by linked list now. Hence we can set
up all expected values before starting tested split I/Os.
This change will make the logic clearer.
Change-Id: I9226619468220132aebd55a5da36490a145c128a
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/427947
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Each file that need to check SPDK_CONFIG_* options need to include
spdk/config.h explicitly.
Change-Id: If9f2a91ac4c2b1a300dcf88ec3e2a12714ad344a
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/427221
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This patch is to introduce the specific QoS related structure
and the enumeration for types of QoS rate limits. Later new
types of QoS rate limits can be supported easily.
Change-Id: Idb8d2e7627fd145bf2b0ddb296c968b6b068f48c
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/424459
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Current test code works only for sequential split I/Os. The next
patch will support submitting batchedsplit I/Os.
Prepare test code as a separate patch to make review easier.
Change-Id: I05b732c9a656ecab74a2594bf50ddf42eb41584e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/425877
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When a bdev IO is split, if iovec size in a strip is more than 32,
the IO will fail.
Remove the limitation by spliting the split IO further.
Change-Id: I962ad86dfe63ea1fcd86ffa52ead7452fb80e53d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/425876
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
For single base bdev case, IO is changed not to be split. However
UT code was not changed together.
Change-Id: I81e66b256892b7bee7a42c72bb0bce6d3320b617
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/425534
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Initial support for softare AESNI_MB DPDK driver only.
Have tested (both aesni and QAT seprately and concurrrently) on underlying NVMe devices
with bdevio and a bdevperf script that runs IOs from 512B to 128K each with Q depths from
1 to 512 in powers of 2 for 30 seconds each run.
QAT can be included in the code (but not makefile) and marked as experimental
until we are ready to test in CI. It works well on 2 systems but is a big PITA to get
the hardware setup and configured for use with DPDK (IMHO).
Change-Id: If518c3df8e74e00efa18afdf194824c5e69778fc
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/403107
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch just adds the call, but doesn't change behaviour of blobstore.
io unit size remains same as page size.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Idcd1b7d5126fc7cacf12c996188bd41e2c9a744d
Reviewed-on: https://review.gerrithub.io/425355
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The bdevio tests will now work on RAID volumes, so enable
RAID testing there too.
It is probably safe now to just build RAID by default, and
not require --with-raid - but let's do some more testing
with vhost and NVMe-oF against it first before we do so.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I15697f035cb688574a7ecb8be24d0c84fc622d83
Reviewed-on: https://review.gerrithub.io/423408
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Change the behavior of construct_raid_bdev RPC to be consistent with
other bdev modules.
Create a config of raid bdev first. Then create a raid bdev based
on the config.
If both succeed, the config and the raid bdev are not removed even if
any failure occur later in construct_raid_bdev RPC. Otherwise, both
are removed and return failure.
During iteration of adding base bdevs in construct_raid_bdev RPC,
- skip any nonexistent bdev and move to the next base bdev.
- if adding any base bdev fails, move to the next bdev.
- if adding base bdevs don't fail but any base bdev doesn't exist,
the raid bdev is in the configuring state and return success.
- if adding base bdev fails, the raid bdev is in the configuring state
and return failure.
- if all adding base bdevs succeed, configure the raid bdev. If configuring
the raid bdev fails, move the raid bdev to the offline state and return
failure. If configuring the raid bdev succeed, return success.
check_and_remove_raid_bdev() becomes unused in raid_bdev_rpc.c but
is still necessary in UT. Hence move this function to UT.
In UT, finding a raid bdev config by name becomes necessary. Hence
factor out the iteration to a function and use the function in UT.
Change-Id: Ifa36967bdc987d97030e3a4e36684cb37b329d4e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/423622
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When construct_raid_bdev RPC is callled, even if all adding base bdevs
to it fail, a raid bdev with no base bdev should exist and be in
the configuring state.
Extract raid_bdev_create() from raid_bdev_add_base_bdev() and put it
before starting iteration of raid_bdev_add_base_bdev().
This change cam be applied to .INI config file too.
Change-Id: Ia71aca0bbdb33049fe5bd9b8fd8163c99c032401
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/424148
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Cleverly, UT for raid bdev sets number of base bdevs by using
the random number generator.
When the random number generator outputs 1, test code especially
for single base bdev case failed.
When removing raid_bdev_send_passthru from library, the corresponding
test code was not removed.
This patch removes the test code.
Change-Id: I23be88358fe364bc757979a26398b80339e19910
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/424159
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is a race condition with the following sequence:
spdk_bdev_open()
spdk_bdev_unregister() <-- starts deferred message
spdk_bdev_close()
deferred message runs, crashes
Change-Id: I81fbced0849949cfb2dae5a7cc6f60c9685a8885
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/424739
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Latest scan-build finds a legitimate issue here - although
it's not clear why it was only found when testing against
a seemingly unrelated patch...
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic981f6f403c638b0b2d454c0be9f7fbe145171d9
Reviewed-on: https://review.gerrithub.io/424887
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_bdev_close() must be called on the same thread as
spdk_bdev_open(). Further, the remove callback on the
descriptor will also be run on the same thread as
spdk_bdev_open().
Change-Id: I949d6dd67de1e63d39f06944d473e4aa7134111b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/424738
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This was added a long time back for tracking an rte_mbuf
whose buffer was a different rte_mbuf - all related to
a userspace TCP stack that is no longer in development.
The concept isn't useful now, so remove it to reduce
the complexity of the tracing code.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I310e492eba7f55df242bb29d82fb19f6daee1f51
Reviewed-on: https://review.gerrithub.io/424565
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This issue is related to Clang assuming that global variables can be
modified from their original value.
Change-Id: I576a4af7e379a951a9f971850391c7e17145df87
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/424717
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a string name used for debugging only.
Change-Id: I9827f0e6c83be7bc13951c7b5f0951ce6c2a1ece
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/424127
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Set the bdev->optimal_io_boundary to the strip size, and
set split_on_optimal_io_boundary = true. This will ensure
that all I/O submitted to the raid module do not cross
a strip boundary, meaning it does not need to be split
across multiple member disks.
This is a step towards removing the iovcnt == 1
limitation. Further improvements and simplifications
will be made in future patches before removing this
restriction.
Unit tests need to be adjusted here to not span
boundaries either.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I08943805def673288f552a1b7662a4fbe16f25eb
Reviewed-on: https://review.gerrithub.io/423323
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Splitting a 1TB unmap into individual 64KB unmap commands
(for a RAID volume with 64KB strip size) would be awful -
the RAID module can be much smarter about this.
So back out the changes for splitting I/O without payload.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I24fe6d911f4e3c9db4b2cb5d66c7236a5596e0d9
Reviewed-on: https://review.gerrithub.io/424103
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Fixes a use after free error in bdev/bdev_ut
Fixes an uninitialized argument value error in mt/bdev/bdev_ut
Adds extra checks in the spdk_bdev_part_construct code
Fixes a dereference of null pointer error in bdev/vbdev_lvol_ut
Change-Id: I1eaa6ebfec0a36a0d910504c70b16ccc651de22a
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/423923
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This removes assumptions about hte lifecycle of these variables relative
to the parent bdev and allows us to avoid ambiguity about who
is responsible for freeing these buffers.
Change-Id: Ia996653562d532fa1501faf21d3fdff85033ab33
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/424105
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
When a raid bdev is constructed by JSON-RPC construct_raid_bdev,
information about config and slot can be passed to
raid_bdev_add_base_device() and raid_bdev_can_claim() doesn't have
to be called.
Hence extract raid_bdev_can_claim_bdev() from raid_bdev_add_base_device()
and put it to raid_bdev_examine().
Change-Id: I92e02bf3661cb97b691246f32198ba946810d96c
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/423618
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
raid_base_bdev_config is suffciently descriptive as name and so
"name" can be used as the name of the base bdev.
Other structs have used "name" as the name of bdev.
Change-Id: I090ef541a84fd14d9ec3bfebbdc96ae649709551
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/423614
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
