As LLD cleanup is asynchronous in nature, Pass the
spdk_nvmf_transport_destroy_done_cb to LLD and it will be called
once the cleanup is completed.
Dont forcefully remove fc_ports by nvmf_fc_port_cleanup function.
LLD will drive the fc_ports cleanup gracefully as part of nvmf_fc_lld_fini.
Signed-off-by: Naresh Gottumukkala <raju.gottumukkala@broadcom.com>
Change-Id: I537b9ea817eda26a0469114821e2288d2ba9d91c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5827
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
As fc_req is freed in the previous step, using fc_req->hwqp
results in segfault. Fix this.
Signed-off-by: Naresh Gottumukkala <raju.gottumukkala@broadcom.com>
Change-Id: I9d82f62a24e8c139b1971466948fc5aa3513f4ea
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5826
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
For ABTS search only in already established connections. Skip
any connections that are in process of establishing.
Signed-off-by: Naresh Gottumukkala <raju.gottumukkala@broadcom.com>
Change-Id: I824f14b38faaa6897d2e5a4c4564bbb0f8e2fd74
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5824
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
For FC, Fused commands ordering is not gauranteed but nvmf layer expects strict ordering.
FC LLD layer can reorder this out of order commands based on FC header CSN.
Introduce a new FUSED_WAITING state that can be used by LLD to keep waiting the out of order
data.
Signed-off-by: Naresh Gottumukkala <raju.gottumukkala@broadcom.com>
Change-Id: I85eba0059f75ff3775f664e85ed2e4dc258d27a6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5811
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Currently we dont have an api to delete fc port. Add SPDK_FC_HW_PORT_FREE
api. This is useful in cases of hardware reset and other error cases.
Signed-off-by: Naresh Gottumukkala <raju.gottumukkala@broadcom.com>
Change-Id: Ib1b986ee7ab2f54043bd300b52121b651c292e5b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5810
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
1) As part of nvmf_fc_adm_evnt_hw_port_offline event, We try to remove
hwqps from pollgroup but we dont actually wait the action to complete.
Wait for the action to complete before completing nvmf_fc_adm_evnt_hw_port_offline
as this will serialise things nicely.
2) Protect fgroup->hwqp_count inside the transport lock as there can be
races where an fgroup can be removed paralley.
Signed-off-by: Naresh Gottumukkala <raju.gottumukkala@broadcom.com>
Change-Id: Ib7af6bc0641c91e40331da2b2a7e72b5f55d54ae
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5808
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Code cleanup to make the code looks more clear, this helps the coming
inflight IOs support for packed ring.
Change-Id: Iebca17e01e597eab2a920dd7f38056c57ae2cd11
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5755
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: JinYu <jin.yu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Previously the function also get the payload from vring descriptors,
this mixed the process of vring and virtio_blk together, now it's
only related with virtio_blk.
Also this make the resubmission process more clear.
Change-Id: I6dd17cf9e30dde99e50a7c6d345b6eee7fa5b758
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5754
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: JinYu <jin.yu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Current SPDK thread library has a issue which occurs if there is
a race between exiting thread and unregistering io_device.
For example, there are two threads. Thread 1 registers a device
and thread 2 gets a channel of the device. Then if thread 1 starts
exiting and unregisters the device, and then thread 2 puts the channel,
thread 2 sends a message to thread 1 to complete releasing the device,
thread 1 already moved exited. Hence thread 2 failed to send the
message.
This patch fixes the race issue. The code is verified by adding
a unit test case.
In detail, add a count, unregistering_dev, to struct spdk_thread,
increment it if a callback is specified to spdk_io_device_unregister(),
and then decrement it in _finish_unregister(), and thread_exit()
checks if it is zero.
The contents of struct spdk_thread is changed but it is not public
data structure, and hence suppress it for ABI testing.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idf5faa55335c3ea89f47ccce32687a6be2e26c68
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5796
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Bdevperf shutdown_cb calls spdk_app_stop(0) directly.
But since json configuration also failed, spdk_rpc_initialize()
that calls spdk_app_stop, with -EINVAL. So subsystems are shutdown twice.
Adding a flag stopped in spdk_app to record the spdk_app status.
This confirms spdk app one start and one stop.
Meanwhile this fixes some SEGVS.
Fixes issue: #1731.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Ic3e36a458813a2d6bcf806de67ab691446b8d6fe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5802
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
spdk_nvmf_request_exec_fabrics() is still required because for coming
vfio-user transport, Fabric commands are executed synchronously, and
at that monment, the ADMIN queue was not in active state.
Change-Id: I6c53950680d0ad0ab199f66e88ab34a0af46dc14
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4234
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Since there may be race condition, num_events gotten
from kickfd is not always right to reflect the number
of requests in virtqueue. So remove this check.
Instead, avail_idx in memory reflects the real situation
whether there is unprocessed requests in queue.
Change-Id: I4e59242cf3101ece912777533411bc4dcdc81c9d
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5787
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
kickfd of virtvq should be akcnowledged firstly in
vhost_vq_avail_ring_get function, in case there is
no available requests then kickfd won't get acked.
Change-Id: I9c2f0cc19be9da54649991ddab5a5b5640ed941a
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5780
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
After carefully checking the code, spdk_nbd_stop should
be called in the same spdk thread which creates the io_channel.
Usually, the spdk thread which handles the rpc call should be
same with the thread which finalizes the thread. But it could
be different. So adding another async call to make sure we should
call spdk_nbd_stop on the same spdk thread.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I276eb35e78b930d31869f10137712a78aaee71ed
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5705
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In the stress test of NVMe TCP (ARM platform, 6 nvme disks),
we see nvmf_tcp_req_set_state() takes quite some CPU cycles
(about 2%~3% of the nvmf_tgt process, ranking 6) moving TCP
request structure between different queues. And after some
analyzes, we think these actions can be saved. With this change
we get 1%~1.5% performance gain overall.
Change-Id: Ifd2f5609e4d99cab9fea06e773b461ded6320e93
Signed-off-by: Rui Chang <rui.chang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5667
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Allocate memory with zero number or size, maybe return a unique
pointer rather than NULL. Add a check before common allocation APIs.
Change-Id: I83e07cab5145035e705bc32364652be90f238633
Signed-off-by: Mao Jiang <maox.jiang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5809
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
According to 12.19 in iSCSI 3720.
"If DataSequenceInOrder is set to No, Data PDU sequences may be
transferred in any order."
So if the DataSequence is negotiated with "No", then we can
send Datainpdu in out of order manner. And the initiator will
handle this case.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ia15f56c606e4f97af019f91fa1118cc9cac5daa7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5719
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
For sending data in pdus, we can direclty use task->scsi.offset,
because task->scsi.offset is already set it before (in functions
iscsi_conn_handle_queued_datain_tasks). So we should not update
this offset in the task structure again.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I873a6f7fb174145fd90fe84a00a80a4de2d49161
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5753
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Use a DEBUGLOG instead of ERRLOG when nvmf target
receives a command for an invalid nsid. This condition
can happen when namespaces are removed while I/O is
in progress, so we don't want to create lots of error
messages when that happens.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I629119c37f8744541708ca8fe2afd5d9dcef0e54
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5766
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
As part of IT delete make sure to delete any pending LS requests
for that remote port.
Signed-off-by: Naresh Gottumukkala <raju.gottumukkala@broadcom.com>
Change-Id: Ic3c60ab40bcf54d56ac57bcde84b85acfc5cf3f0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5712
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add FC LLD specific port placeholder in spdk_nvmf_fc_port.
As part of SPDK_FC_HW_PORT_INIT admin API, Let the LLD know about
the new fc_port.
Signed-off-by: Naresh Gottumukkala <raju.gottumukkala@broadcom.com>
Change-Id: Ib9300176d294642a1825577a31ad999590f5f29d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5711
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When ever command is recieved, validate connection and qpair state
before accepting the command.
Signed-off-by: Naresh Gottumukkala <raju.gottumukkala@broadcom.com>
Change-Id: I4636b98ab24de9be0fa7fd727c8b80f16922eb2b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5709
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
As NVMF qpair maps to a FC level connection, Ideally a qpair fini
should cleanup fc level connection irrespective of what type of qpair
it is i.e admin or IO. But today IO qpair cleanup is actually a dummy.
Also FC nvmf_transport_qpair_fini is just triggering fc level connection
cleanup but not properly synchronized. Use latest async nature of
nvmf_transport_qpair_fini enhancements to fix this.
Signed-off-by: Naresh Gottumukkala <raju.gottumukkala@broadcom.com>
Change-Id: I883ed774769e2d4a2575b6d90bb3348981cd1e0d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5700
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Currently we are iterating over a hwqp connection list for every
IO command received. With high load of connections, this is causing
penalty. Use hash table for connection lookup based on connection ID
and also RPI identifier.
Signed-off-by: Naresh Gottumukkala <raju.gottumukkala@broadcom.com>
Change-Id: I857e299722a0b72b25b0dbfe646d446ad98b7c76
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5688
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
According to iSCSI 7143 spec 11.15.1 (3720 spec 10.15.1),
Rsph->response should be 0 if connection or session closed successfully.
The current code mistakenly compared cid provided by initiator with
inner conn->id parameter, which does not follow the spec.
Change-Id: I12dbb3471be5d49380c6b65bcdb67c57df11665f
Signed-off-by: ShadowMov <jinnian.hjn@alibaba-inc.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5731
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
1 For nbd_io in received list, we should not call nbd_put_io directly.
We should still let those I/O be executed by the lower bdev layer in SPDK.
2 For nbd io in executed_io_list, we should not directly put the nbd device.
The correct way is that we should write the io response to the kernel NBD
device. Then the nbd device will not hang.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ic031ca23241dd77ef47e6ac21f6c346e67f3ce28
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5720
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Current version provides unclear output
Change-Id: Ib044b00b5f91b1e363911f1b79c51c73c8a6920c
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5743
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Transport specific request to abort is never null,
if we don't find a request by cid then we will abort the
last request.
Change-Id: Ie9eb55822b47381ae254e19266b9f3ffadbb67ea
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5196
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Originally introduced in:
"(8126509) rdma: replace improperly aligned buffers in requests."
This behaviour is for handling buffer split over two memory regions.
It is not unique to specific DPDK versions.
As such the comment and ERRLOG is not relevant here.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I31bec435d92d8271d4a040855cfc4ff97f3d9d50
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5345
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The purpose of this patch is to make spdk_bs_opts
for compatiblity issue.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I26d2a6bc644feede64d48890c7903f224b1fc306
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5681
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This function can be removed if we change the parameter type
in nvmf_tcp_request_free.
Change-Id: I4dbf0e7fa79c8c0115d7bcae99cb241aec367f1a
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5702
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch includes the following work:
1 Add two fields in spdk_bdev_opts structure and make the
two fields configurable.
2 Update the unit test in bdev_ut.c
3 Revise the set_bdev_options rpc call and add the support
to use the two new fields.
Change-Id: Idd6073b3a3ffaba8161e3ffa9444a9e533e67f6d
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5664
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Purpose: In order to free all the allocated resources.
Our current code uses sync behaviour, and it will not wait for all
the resources are freed if there is active I/Os, and thus we will
not free some resources, e.g., some fds will not be closed.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Iaf9a606da2049ffd0096860c46d89d094038a5ff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5601
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Sun Zhenyuan <sunzhenyuan@baidu.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
The code changes, and this is not the second priority.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I08fdac561f2d3f902763c39c37455727aa529b9f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5663
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There are transport types like vfio-user or fc for which this field is
optional so there is no need to explicitly specify it for the add
listener rpc. Still validation of this filed is preserved for rdma and
tcp transport.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I6aef55bed45b3653472fd356e5a7cfead22c6f2b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5605
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
It is optional to register i.e. most transports will not need to take
any action. It allows additional verification of ns/bdev capabilities
on transport layer before actual attachment to the subsystem.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I07d96b1d33c2d5433b951cb418ae1a89bf9caea5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5666
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
blob_persist_clear_clusters() issues 'unmap' or 'write_zeroes'
IOs in one batch, this can consumes lots of 'bdev_io's.
we need to try best to merge the contiguous clusters
especially in the following case:
cluster 0: LBA 128 (count = 128)
cluster 1: LBA 0 (meaning thin provisioned, no cluster allocated)
cluster 2: LBA 256 (count = 128)
Besides, in the long run, we may need to do this batch by sequence.
Signed-off-by: Sochin Jiang <jiangxiaoqing.sochin@bytedance.com>
Change-Id: I436c8b46a1ee33ec127d0f43fd85b2c443689b59
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4082
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This reverts commit 6d87bc7a8a.
There is an issue with the desing here i.e. lifetime of the subsystem
opts shall be associated with the subsystem but the transport specific
layer is not having any notification about that. As an alternative to
the transport specific subsystem opts listener interface was extended
in a previous commit.
Change-Id: I75c4e329e411a91694959db18ff1955774f0993e
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5571
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
With new spdk_nvmf_transport_listen function it should be possible to
add generic options without breaking API/ABI. For now it only delivers
json parameters which can be decoded on a transport specific layer.
This is similar to what was done for spdk_nvmf_transport_create and opts there.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Iaf576248a0b10b408c4a3182785270be3e32ebe4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5570
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We were using the stringified trtype which will always just print "CUSTOM" for pluggable transport
types. It is better to use the trstring since it will exactly print the transport name as requested.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I5c184fe0ec209366339b658c647629d76bb8300b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5643
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Here "return rc == -EINPROGRESS ? 0 : rc;"
They are the same meaning in these two functions.
Keep the comments here. This makes more clear to readers.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I8590de3f0fe27337163ee8b02ea63e166f1bbe7c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5689
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
As log shows
00:06:32.300 [2020-12-18 21:13:35.511014] nvme_ctrlr.c:1414:spdk_nvme_ctrlr_reset: *ERROR*: Controller reinitialization failed.
00:06:32.300 [2020-12-18 21:13:35.511104] nvme_ctrlr.c: 925:nvme_ctrlr_fail: *ERROR*: ctrlr 192.168.100.8 in failed state.
00:06:32.300 [2020-12-18 21:13:35.511132] bdev_nvme.c: 392:_bdev_nvme_reset_complete: *ERROR*: Resetting controller failed.
00:06:32.300 [2020-12-18 21:13:35.511240] nvme_ctrlr.c: 925:nvme_ctrlr_fail: *ERROR*: ctrlr 192.168.100.8 in failed state.
00:06:32.300 [2020-12-18 21:13:35.511511] bdev_nvme.c: 556:bdev_nvme_failover: *NOTICE*: Unable to perform reset, already in progress.
if spdk_nvme_ctrlr_reset() failed, nvme_ctrlr_fail() is called, and
then if spdk_nvme_ctrlr_process_admin_completions() failed,
nvme_ctrlr_fail() is called.
We don't know which one comes first but nvme_ctrlr_fail() should do
nothing if the ctrlr is already failed.
Hence we should avoid setting ctrlr->is_failed and calling
nvme_transport_ctrlr_disconnect_qpair() twice.
However we should set ctrlr->is_removed if the parameter hot_remove is true.
We do these changes in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iac37c892e054fb59d78e69346ca7f0575d596235
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5694
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Flag VIRTIO_BLK_WRITE_ZEROES_FLAG_UNMAP is only used for WRITE
ZEROES command, vhost-blk target may tell VM via 'write_zeroes_may_unmap'
configuration that the backend can support this flag, however, Linux
generic block driver doesn't have such logic, it will enable this
flag by default(without REQ_NOUNMAP) with WRITE ZEROES command,
so the backend may choose to ignore this flag, because WRITE ZEROES
with this flag isn't mandatory.
Fix issue #1714.
Change-Id: Ic9388f39269720a23c00d41cba585d2a5abc3cfb
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5565
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
In some extreme use cases, an SPDK process could get
swapped out for a long period of time just after
we checked the state but before we called spdk_get_ticks().
So now we will only timeout if the timer expired before
we checked the state *and* the state did not advance.
It's possible we could just move the timeout check
to before the ctrlr->state switch, but I was
hesitant to change the flow for this case.
Fixes issue #1720.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I95b1db3365b5d2d8a65e528f53c302a724d44460
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5596
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
here we can see that an error rpc response returns.
need to free the rpc nbd start req.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Iebc7cb416c691e8cd48a997f65bff664d9026657
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5635
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
It is possible that STDIN_FILENO is registered as one
interrupt source. So fd_group and spdk_thread should
accept fd whose value is "0".
Change-Id: I96c7e0d6dc1dfa10b42b59aadfa6dc159c133519
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5161
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This member is useless now, all tcp requests
are tracked using state_queue member.
Change-Id: I4771ec163e44202a5d98d356d8935b6e518575ff
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5576
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This change prepares for the potential change in spdk-bdev_opts
in the future in order to maintain the ABI compatibility
Change-Id: I8ce24299173854c14c697bf7e28cf365c23f005f
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5597
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Per section 5.2 of the NVMe 1.3 spec:
"When the controller posts a completion queue entry for an outstanding
Asynchronous Event Request command and thus reports an asynchronous
event, subsequent events of that event type are automatically masked by
the controller until the host clears that event. An event is cleared by
reading the log page associated with that event using the Get Log Page
command (see section 5.14)."
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Change-Id: I0773ce1b704c2124db354fd19e0a8a19da48da54
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5462
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add support to queue pending async events to avoid event lost if
multiple async events happen when there is no outstanding AER requests.
Pending async events will be consumes in FIFO order once any AER
requests are received.
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Change-Id: I545f0baa4ec2996e9e02ec12c176d639e3c0d55a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5117
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This reverts commit e21de9a9cc.
Reason for revert: The public API spdk_nvmf_qpair_get_listen_trid() was
overlooked when this patch is created. Then the code to use the trid was
replaced by spdk_nvmf_qpair_get_listen_trid(). To avoid someone from using
the trid in future, revert this patch. struct spdk_nvmf_qpair is defined]
in the public header file, nvmf_transport.h but it is mainly for pluggable
custom transport.
Any custom transport will not use the trid, and so even if we remove it,
we will have no issue.
Change-Id: If4656edf3ac68456e758013d487eb582699750aa
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5614
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
This reverts commit 9ef1496ba5.
Reason for revert: The public API spdk_nvmf_qpair_get_listen_trid() was
overlooked when this patch is created. Then the code to use the trid was
replaced by spdk_nvmf_qpair_get_listen_trid(). To avoid someone from using
the trid in future, revert this patch. struct spdk_nvmf_qpair is defined]
in the public header file, nvmf_transport.h but it is mainly for pluggable
custom transport.
Any custom transport will not use the trid, and so even if we remove it,
we will have no issue.
Change-Id: I3bf500c27d9d47cc98ee84823b3c098ffcc56d90
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5615
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
All of our Makefiles duplicate huge lists of libraries
in SPDK_LIB_LIST. We have a very precise and accurate
accounting of the library dependencies in
mk/spdk.lib_deps.mk which can be used to generate
the full list if the app specifies the modules and
subsystem libraries it wishes to link.
I did a first pass through all of the existing
Makefiles to take advantage of this new functionality.
There may be more optimizations we can make later but
don't want to hold up this patch for all of them.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icdaf6f749a6908df2c2ce2db22631a4af4ff3a9e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5553
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If the sock belongs to a polling group, we already have the mechanism
to do the write/flush work.
Change-Id: Ic15660717f4e83d873ec9f642ababd7fd9cda5eb
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5442
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When the backend device supports max segments and
max size, we may need to split the IO if the IO segment
size is bigger than max_size or iovcnt is bigger
than max_segments.
Add unit test for span split
Change-Id: If8e9c4f903b7def0ad7ddec7dc5aab8410498db5
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4602
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Delete connection code is scattered all over the place for
different scenarios. For FC-NVME2, we also need to have
ability to delete single connection at runtime. Cleanup delete
connection code and have a signle nvmf_fc_del_connection api that
can be used in all scenarios.
Signed-off-by: Naresh Gottumukkala <raju.gottumukkala@broadcom.com>
Change-Id: I8d153681fd89dab8c4844b18f29c7e8f7caaa94d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5433
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
1) Create fc_req pool per fc connection based on SQ size. This gives more flexibity.
2) Remove create_max_aq_conns_test as it is not longer valid. We dont have any limit
on number of AQ connections based on the HW RQ size.
Signed-off-by: Naresh Gottumukkala <raju.gottumukkala@broadcom.com>
Change-Id: I5c0b0d9ec9e9d63c7dccd76be7d6363a1f49c63e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5432
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
This patch is for packed ring live recovery.
First step is to track the packed ring descs.
This feature base on this QEMU patch:
https://patchwork.kernel.org/patch/11766697/
Change-Id: Id0ccb6fd12b3623cc367424f496b4ffc5323f390
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4126
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch is used to support ABI compatability issue for spdk_app_opts.
Fixes#1484
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I6fed777fa15b367f7c3706b8f218d86d56493906
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5330
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
When a device is removed, we should use the remove_cb
that was specified when the device was originally probed
and attached, if one was set.
Also add a new spdk_nvme_ctrlr_set_remove_cb API. This
can be used for cases where a different remove_ctx is
desired than was specified for the probe call. This
also enables setting a remove_cb when using connect APIs
which do not have a way currently to provide a remove_cb.
This also requires fixing the bdev nvme module, which
was depending on the previously errant behavior.
Fixes issue #1715.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id848b39040099ff7a21fe57ea6b194a8c25ae015
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5510
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
nvmf_subsystem_state_change() protects against going
starting the pause/change/resume chain again if we
haven't completed the previous chain. But add
some asserts to make sure the cb_fn and cb_args
never get set twice. This also requires setting
them back to NULL after they've been used.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I56c6c89bfb108223f731d5ac28100abbb746ab2f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5531
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We have an intermittent CI failure that hits this
assert. Adding some more detail to help analyze and
root cause.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2174dda58d0ae4d98359a914e5975f8be3e45a89
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5550
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch is used to support ABI compatibility related with
spdk_nvmf_transport_opts structure. We add a field opts_size in
spdk_nvmf_transport_opts and change the related two functions.
Fixes issue: 1485
Change-Id: Ifed3dc482bbc8fb54eb7089f7a1931718682f214
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5293
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
iWARP doesn't support this ibv async event.
Probably some clean up of SRQ needs to be done, e.g.
post dummy drain WR to SRQ and wait for its completion
when qpair is being destroyed.
Change-Id: Ic1035dbd8192e665eedbaf89e5cf4e00cb0506c6
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5474
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The backend device such as virtio-blk or virtio-scsi
may support the SIZE_MAX and SEG_MAX. Then SPDK needs
to split the big IO. Add this feature in bdev.
Change-Id: I2442e14121ccf141682964425e96382fec482af3
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4600
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If ls_pending_queue is not empty, then add the ls_rqst to
ls_pending_queue instead of trying to get xri.
Signed-off-by: Naresh Gottumukkala <raju.gottumukkala@broadcom.com>
Change-Id: I97e48f30cb6d4fd69548d48e6360275d9f1adec0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5502
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
nport and rport data structures are supposed to be used only
in control path but not datapath. FC data path scaling is based
on connection and connection object contains all the required
information for command processing.
Signed-off-by: Naresh Gottumukkala <raju.gottumukkala@broadcom.com>
Change-Id: I70f6896955d97abc86bc7c5e6b9f160d622e60d7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5501
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Currently we are holding hardware receive command buffer till
the IO is completed. This is effecting the number of commands hardware
can receive. Copy the cmd into driver buffer and release the
hardware receive buffer back to hardware ASAP.
Signed-off-by: Naresh Gottumukkala <raju.gottumukkala@broadcom.com>
Change-Id: Ic292056b3e012d40515d0de5b9808cd8960811ce
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5430
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Today we have two lowlevel LLD apis nvmf_fc_init_q and
spdk_nvmf_fc_init_poller_queues for LLD queue initialisation.
Since two calls are redundant, merge them to one api. Also remove dead
function code nvmf_fc_hwqp_reinit_poller_queues.
Signed-off-by: Naresh Gottumukkala <raju.gottumukkala@broadcom.com>
Change-Id: Ic3df6bff7d38d7b1e946755c3224daf7f6194125
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5444
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use inline code instead of functions when it is used only once.
Signed-off-by: Naresh Gottumukkala <raju.gottumukkala@broadcom.com>
Change-Id: I5af26f81ac15546dd1e4e4a14753d32f7ee9e1d7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5443
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
SPDK supports two latest DPDK LTS releases and DPDK 20.11
is out now.
Remove all functionality and checks for versions <= DPDK 19.11.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib4c750c49352fe4ad4b50c7a719867387808f0df
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5343
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
__rte_experimental attribute in DPDK ends up being changed to
'deprecated'. See rte_compat.h in DPDK.
Goal of patch below was to allow SPDK to use experimental API
"(b6fce19) env/dpdk: add support for DPDK 18.05 dynamic memory allocation"
Yet it disabled warnings for both. This patch makes it so that
__rte_experimental will not produce warnings, but deprecations in DPDK
will.
It will help identify incoming changes when testing newer versions
of DPDK in the future.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I9a75e37c976d613c7ec6ee32e05fc6da79a60a1f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5342
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
master_core will still be available but deprecated.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6fe9eb7fecb2919795c439a02cb7d9d06a2774d8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5358
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This helps us remove master/slave terminology from
SPDK and is aligned with similar changes made recently
in DPDK.
While updating nvme/identify to use the new member
name, also replace g_master_core there with g_main_core.
Other nvme utility usage of "master_core" will be updated
in a later patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0ec4e3e9b644bec21b3729809bf5c4d35b10837f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5351
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
These replace the pci-whitelist and pci-blacklist params
which are now deprecated.
pci-blocked will still use the -B short name. pci-allowed
will use a new -A short name.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icf1c46c40ad6a0f49fb539b18cdd8d0c8daac636
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5281
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The old pci_whitelist/pci_blacklist are now deprecated.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9fddec0c90691dd385eb21d13be849247f144889
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5279
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
pci-whitelist and pci-blacklist are deprecated, so
use 'allow' and 'block' instead for DPDK versions that
support it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I430f73fc402ca9fc07d004e719435e5b3dc963f9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5278
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In some cases we need to check if we are working with
SoftRoCE driver (rxe) since it doesn't support several features
such as SEND_WITH_INVAL and LAST_WQE_REACHED ibv async event.
vendor_id of this driver has been changed from 0 (it was not
initialized at all) to 0XFFFFFF in commit
0184afd15a141d7ce24c32c0d86a1e3ba6bc0eb3
So now we should check for both values.
Change-Id: I62ce4d68c11612a07fe97606658a5b79f1db2149
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5307
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This was omitted in 296a6d9838
and is currently causing ABI inconsistencies.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ifb5b2360ff1ffbaffdc3b5d057047d035b98d909
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5368
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There is a public API spdk_nvmf_qpair_get_listen_trid() and it can
get trid of the specified qpair safely for any transport including
pluggable transports.
The API was overlooked when implementing the multipath feature for
NVMe-oF target. trid pointer was added to struct spdk_nvmf_qpair and
was used to find a subsystem listener.
However, pluggable transports got seg. fault because trid of the
qpair was not set.
To avoid such segmentation fault for any transport, change
nvmf_ctrlr_create() to use spdk_nvmf_qpair_get_listen_trid().
The struct spdk_nvmf_qpair is located in the public header file,
and so leave the added trid for now. It will be deprecated eventually.
Reported-by: Jacek Kalwas <jacek.kalwas@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5e0bd24bd58b6ffdf1352332a179a82682f1589f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5323
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
rdma_disconnect may return an error and set errno to EINVAL in case
of iWARP. This behaviour is expected since iWARP handles disconnect
event other than IB and qpair is already in error state when we
call rdma_disconnect.
Fixes#1704
Change-Id: I38710198d9b6b70b8940947f8e7c553cd4fbbd51
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5314
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Currently only nvme bdev module implements this interface. Bdev module
context (in this case spdk_nvme_ctrlr opaque handle) allows for nvme
interface usage for additional management.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I6302c9229d5f7f294a3c1472d9e8dc1519637ffb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4924
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
checks
Check if the subsystem is paused before checking whether the qpair is
active. The order of these checks doesn't really matter, but in the next
patch it will be more convenient to check the subsystem first.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ibc95e2578e9a95296f5fbc6023af3b542e954781
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5015
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This function is only called from one spot, so it's simpler to combine
it with that function.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I0a35e11edaf6c4446de530a3b0f538aa4a3238f7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5014
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
always be specified
Previously the parameter was optional and the size could be increased as
necesary. Now, it is required and a hard maximum. Later another function
could be added to dynamically increase or reduce this number if
necessary.
Change-Id: I3524ac737a6b592b4f6ce14ea48d3742a352c70f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4996
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Previously, trace file is always created in shared memory.
Adding disabling trace in order to avoid trace
file's creation if user doesn't require trace.
Also returning error if trace is disabled but trace rpc is
call to enable or diable trace group
Change-Id: Ic9ea781a8a1edd530d0a5921b0dc774356ae4d48
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5195
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
spdk_vtophys() already checks that, so we don't need
to check it in the NVMe driver again.
Change-Id: I74288ae8cab80e1be34583475fa02a3ae13e090c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5166
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In commit 9eefbc, we've fixed an iscsi connection leak problem(
use telnet ${ip} ${port} to reproduce), that a connection without
login handshake will be left forever with 'invalid' state. Here,
to avoid killing normal connections by mistake, we need to unregister
login timeout timer in two right places:
1) immediately after login timeout happened
2) when we receive login pdu instead of login success(login may fail
because all kinds of reasons: ACL...)
Signed-off-by: Sochin Jiang <jiangxiaoqing.sochin@bytedance.com>
Change-Id: I55bbc1c6ac6d2e0b6545b9f7d802ba057b2a09dc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5209
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
As part of FC transport destroy, FC LLD (Low level Driver) needs to
to do its cleanup which cannot be completed synchronously. So
allow transport destroy to be asynchronous.
FC transport code to use this functionality will be pushed shortly.
Signed-off-by: Naresh Gottumukkala <raju.gottumukkala@broadcom.com>
Change-Id: I104cf7d131e18199abdcf0651df261fe41d666ef
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5180
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add an new optional parameter wait to the RPC, iscsi_create_portal_group
not to listen on portals until it is started explicitly.
Fixes the issue #1676.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic217f1ccceb618e70fdb2aff3f710d262a8a9bdb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5091
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add an new RPC, iscsi_start_portal_group, to start listening on
portals if the specified portal group is not started yet.
The next patch will add an new parameter wait to the existing RPC,
iscsi_create_portal_group.
The RPC allows the specified portal group to be already started,
and returns a success response in this case.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I631d6bccffb38092c95694f922f10648e24d6ff7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5090
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Factor out the internal of rpc_iscsi_delete_portal_group() into
a function _rpc_iscsi_change_portal_group() and rename the related
data structure to use them for the upcoming RPC,
iscsi_start_portal_group.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I965f1e52f04fb54c6a89987836f89c508441a37e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5089
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add an new function iscsi_portal_group_resume() and add an new parameter
pause to iscsi_portal_group_open(). They will be used in the following
patches to pause listening portals while target nodes are created at
start-up because Windows hosts do not retry login.
Pausing and resuming portal group is possible because we can unlisten
temporarily by simply not calling accept(). Any inbound connection
requests are queued to the backlog and once the backlog queue is full,
further inbound connection requests are simply dropped. If we restart
calling accept(), we will dequeue the backlog and be ready for more
connecitons.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If7403f91ebd729b47d98a23e589cba8b35569dc6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5088
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
POSIX defines PRId64/PRIu64/PRIx64 for printing 64-bit values in a
portable way. Replace a few references to %ld to remove the assumption
about the size of a long. Similarly, use %z with size_t arguments.
Where the value being printed is an unsigned 64-bit value, use PRIu64
instead of %ld.
Explicitly test for not __linux__ where that is the intent, rather
than testing for __FreeBSD__.
Cast pointer to uintptr_t before aligning it, rather than using
a specific integer size which may not be large enough to store a
pointer.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: Icfe219e1bbb2d06b3ef05710fac5b7091d340251
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5142
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
SPDK virtio driver does not support the virtio legacy
device but it's ok for the modern and transitional
device. So update the probe function.
From the spec:
Transitional PCI Device ID Virtio Device
0x1000 network card
0x1001 block device
0x1002 memory ballooning (traditional)
0x1003 console
0x1004 SCSI host
0x1005 entropy source
0x1009 9P transport
Transitional Device: a device supporting both drivers conforming to
modern specification, and allowing legacy drivers.
Change-Id: I28cd277fb2b2e07a429082b7d7bd581f254eae9c
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5053
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In my thought, this await_req will not have performance improvement,
and it makes the code more complicated, so remove it.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I97d86448fc273098d001a08d914ad45ddac07e16
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5149
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The zone append command, which is part of the Zoned Namespace Command Set,
has a maximum data transfer size that can be less than or equal to mdts.
Since zone append commands will not be allowed to be split, the user has
to be able to get the maximum zone append data transfer size. Add a
function that returns this limit.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I9da2672ea8a307ff62251c069a42f7540765e08b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5140
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Zone append is an optional command in the Zoned Namespace Command Set.
Add a convenience function to check if the controller supports the zone
append command.
The ratified NVMe TP 4056 added a CSI field (in cdw14) to the Get Log Page
command. However, since there already exist two public functions to get a
log page (spdk_nvme_ctrlr_cmd_get_log_page() and
spdk_nvme_ctrlr_cmd_get_log_page_ext()), avoid creating a third one for
now, since nvme_ctrlr_get_zns_cmd_and_effects_log() itself can leverage
one of the existing public functions.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I99516dbac8db6714488b4d6cabe64c27f46d6153
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5078
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Remove superfluous parentheses around ctrlr->cdata.mdts.
They provide no value while making the code harder to read.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I4342d87f0e33fd92fe76357eb0379fb1e9c8f98f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5138
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
RTE_DEV_ALLOWED is an enum and has no associated define, hence checking
for its presence will always be false.
We could test for RTE_DEV_WHITELISTED define, but this macro added for
deprecation warning will be dropped in the future.
Switch to a check on DPDK version.
Fixes: 10ed0eb755 ("env_dpdk/pci: adapt to 20.11 EAL changes")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Change-Id: I75270977b580065b36c753266cbaa5fb73f99eb1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5165
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If the virtio-scsi controller doesn't support the 'eventq' and
'controlq' queue, the operation(vhost_scsi_controller_remove_target)
of removing target from this controller will always hang.
We can reproduce this by starting a qemu without a bootable guest os.
Change-Id: Ia53b48ae1a18cfb9dc919352fc3cce6ade84c9d8
Signed-off-by: Li Feng <fengli@smartx.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5151
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
While I assume that the initial thought of having the
NVME_CTRLR_STATE_WAIT_FOR_* state directly after the state which it is
waiting for, was to make it clear for the reader in which order the
states will be executed.
However, it feels silly to have the same code copy pasted everywhere.
Someone who needs to add a new state will still need to edit
nvme_ctrlr_state_string() and enum nvme_ctrlr_state, which still defines
the NVME_CTRLR_STATE_WAIT_FOR_* state directly after the state which it
is waiting for.
In one way, moving the NVME_CTRLR_STATE_WAIT_FOR_* states to the end of
nvme_ctrlr_process_init(), when reading nvme_ctrlr_process_init(), it is
actually easier to see the ordering of the states which actually do
something of significance.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ia95ea5ac3c44a53179edbdc65cba45bec94e469f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5115
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
As part of nvmf_transport_qpair_fini, FC transport needs to cleanup
all the resources used by that QPair on the shared hardware. This
hardware cleanup is asynchronous in nature.
FC transport code to use this functionality will be pushed shortly.
Change-Id: I5606a33dff45971badd74e0cc087b132b56af076
Signed-off-by: Naresh Gottumukkala <raju.gottumukkala@broadcom.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5100
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
0x10 is thought to be a more common size, hard to tell until
we get real silicon but either way 0x80 limited the total
number of outstanding batches way too much.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I61ba219b9d0185b126d300468ddd8a2214ed284a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4971
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
DPDK 20.11 renamed device and bus control enums [1].
This is a simple renaming, no change in semantics.
1: https://git.dpdk.org/dpdk/commit/?id=a65a34a85ebf
Signed-off-by: David Marchand <david.marchand@redhat.com>
Change-Id: Ia40bae750ad74f405eb700b47514fca021ffd052
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5116
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Move the lock files from '/tmp' to '/var/tmp' cause user maybe delete files in /tmp
or remount /tmp by mistake, And the JSON-RPC domain socket located in '/var/tmp' also.
Signed-off-by: Weifeng Su <suweifeng1@huawei.com>
Signed-off-by: Shihao Sun <sunshihao@huawei.com>
Change-Id: I18d52f42462e8477fb35aeea9e38efc51610d17c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5096
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add handler for 'strstr, strrchr' function in 'NULL' return
that maybe cause memory access issue.
Signed-off-by: Weifeng Su <suweifeng1@huawei.com>
Signed-off-by: Shihao Sun <sunshihao@huawei.com>
Change-Id: I2525fbcd9f8ce0a78383305c735b2d27575f4bfe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5071
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There are many duplicated codes about sending response for writing bool result.
That we need a function to do this.
Then we can reduce many codes.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Ic439111b1e9ca1013f8c657ab925f0c27a7be699
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5033
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When ANA is enabled, if a new namespace is hot-added to the subsystem on
the target side, the Linux host will expect to receive an ANA change
notification after the namespace change one. Without the knowledge of
the namespace's ANA state, the host will not register the associated
block device, so users cannot see the nvme device.
In this patch, ANA change is notified right after namespace change, so
host will get ANA log, update the namespace's ANA state and then
register the block device if it is alive.
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Change-Id: I2faf61d344eb6de7efb2fde3cb1013cf0efd3c2e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5097
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reference the struct members only when it is necessary.
Signed-off-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Change-Id: I44208dfde20f74ab96e494445a464bf45f7ab408
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5070
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When call spdk_thread_get_by_id function to use thread->id to get thread point, if the id value is invaild, just return NULL before search from g_threads tailq.
Signed-off-by: sunshihao <sunshihao@huawei.com>
Change-Id: Ic6c35d2c2b5093c9b513618742b8b9835599ba63
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5031
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The allocated size of buf is too large,i.e., 4096. And we will
have host to be assigned with buf, host = buf. But the tmp_buf (destination)
buffer is not so big. So restrict the buf size and make the vagrant happy.
The max size of conn->target_addr is MAX_TARGET_ADDR, so add additional 2 is enough
according the format to print.
The warning is:
/home/vagrant/spdk_repo/spdk/lib/iscsi/tgt_node.c:377:47: warning: ‘%s’ directive output may be
truncated writing up to 4095 bytes into a region of size 301 [-Wformat-truncation=]
00:03:02.381 377 | snprintf(tmp_buf, len + 1, "TargetAddress=%s:%s,%d", host, p->port, pg->tag);
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ib64e7140d5e14909d2a86dd2d47413abe5cd027e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5092
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Remove linkbreak related code that is not being used anywhere.
Signed-off-by: Naresh Gottumukkala <raju.gottumukkala@broadcom.com>
Change-Id: I8ab2a8337fd5615bdb75744a7abcd28ec3d41f2b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4977
Community-CI: Broadcom CI
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added asynchronous event notices for discovery log change
as per nvme fabrics spec 1.1. This allows a host with persistent
connection to discovery controller to automatically connect to any
new subsystem available to the host automatically.
According to nvme fabrics spec 1.1, if the connect command specifies a
non-zero keep alive timer value and the discovery controller does not
support asynchronous events then we need to return Connect Invalid.
Since SPDK does not implement this check instead added support
for asynchronous events in discovery controller.
Change-Id: I4cade5f7d24826ce97a2fa2b4ca688a1d728c1db
Signed-off-by: Madhu Adav MJ <madhu.adav@flipkart.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4870
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
This patch adds the support for long text response.
Change-Id: I8ef146069c9b8d86eb6df4c9e60cc6a3b2ff1ad7
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4993
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Section 7.9 of the NVMe spec says that all nqns must
start with "nqn.".
Fixes issue #1669.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7fd0e6a0a397e831c4fa2377126b6b1e1b127d88
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5017
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When call _free_thread in the exit process, print poller type information to identify which type poller is not free.
Even if the fuction spdk_poller_register_named called, we don't konw what type the poller is.
Signed-off-by: sunshihao <sunshihao@huawei.com>
Signed-off-by: suweifeng <suweifeng1@huawei.com>
Change-Id: I43f8d51b08a01169d418e6a6a46266887f9a85dd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4999
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When user used CUSTOM transport, follow this step can reproduce:
1. run ./nvmf_tgt
2. ./rpc.py nvmf_create_transport -t ABC (ABC is the transport name)
3. ./rpc.py save_config >> config.json
Then in config.json :
{
"subsystem": "nvmf",
...
"config": [
{
"method": "nvmf_create_transport",
"params": {
"trtype": "CUSTOM",
...
}
]
}
trtype should be ABC , because nvmf_create_transport need pass
the transport name to create transport.
Signed-off-by: jiaqizho <jiaqi.zhou@intel.com>
Change-Id: Iaf24837b649a1736568902f898d48135dac0882d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4973
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
If interrupt mode is set, related poller functions will be
registered to interrupt handler instead of poller.
interrupt_tgt can work as vhost-blk target to support VM.
Change-Id: I3a15f9a63532f44fe0d2f0cb69b0efdd72431d10
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4277
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There is a problem with TCP zcopy enabled:
1. TCP initiator sends icreq and start polling a qpair. Polling of qpair
actively calls nvme_tcp_read_pdu function
2. nvme_tcp_read_pdu: qpair is in NVME_TCP_PDU_RECV_STATE_AWAIT_PDU_CH state,
it reads 8 bytes of common PDU header. It determines the type of the PDU
and finds the size of PDU_PSH header.
3. nvme_tcp_read_pdu: qpair is in NVME_TCP_PDU_RECV_STATE_AWAIT_PDU_PSH state.
It should read 120 bytes of icresp PDU. The number of bytes which needs to be
read is pdu->psh_len - pdu->psh_valid_bytes. qpair receives 120 bytes
(the full PDU) and calls nvme_tcp_pdu_psh_handle -> nvme_tcp_icresp_handle.
Here we check that we haven't yet received buffer reclaim notification and
simply return from this function. At the same time we continue to poll the qpair.
4. nvme_tcp_read_pdu: qpair is in NVME_TCP_PDU_RECV_STATE_AWAIT_PDU_PSH state
and tries to read data from a socket again. The number of bytes is
pdu->psh_len - pdu->psh_valid_bytes. But now pdu->psh_len == pdu->psh_valid_bytes,
so we call nvme_tcp_read_data with zero length.
readv with zero length is commonly used to check errors on the socket,
but in our case there is no errors and readv returns 0.
5. nvme_tcp_read_data treats zero as error and return NVME_TCP_CONNECTION_FATAL.
Fix is to handle icresp, but leave qpair in INITIALIZING state until
we receive acknowledgement for icreqsend_ack. We also move qpair to
NVME_TCP_PDU_RECV_STATE_AWAIT_PDU_READY recv_state so recv_pdu
will be zerofied and qpair will try to read a common PDU header.
But since it is not initialized yet, it won't receive anything
from the target.
Fixes issue #1633
Change-Id: I22cedefe530a8ac3b51495988ed6265d8fad15bb
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4969
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
rte_hash depends on rte_rcu starting in upcoming
DPDK 20.11 release. rte_rcu was only added in
DPDK 19.05 release, so we need to check if it
exists before linking it.
Fixes issue #1661.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7e343c6f964b03cc62484b57803a3bad00f80288
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4947
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This fixes#1423 where the completion loop never
breaks when the NVMe ctrlr is no longer present.
This condition can happen during a hot remove.
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Change-Id: Ia238c8aeae720832068de28ce4d34a9d233344fb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4831
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Vasuki Manikarnike <vasuki.manikarnike@hpe.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
It is possible that a single probe_ctx could be used
to probe multiple newly attached nvme controllers. If
one of those controllers is removed during this process,
the rest of the controllers do not get probed and can
even get stuck in a zombie state.
It is better to just continue with probing the rest of
the controllers.
Fixes issue #1611.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4156ee8b50e8d52cfeee7224f210a58bb773e939
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4945
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Vasuki Manikarnike <vasuki.manikarnike@hpe.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Fixes issue #1635.
Under rare circumstances, the CC.en and CC.shn are both set
which then results in setting the association timer twice.
This scenario was observed during hot plug testing when the
initiator tries to reset the subsystem that contains the
removed device.
The end result is that when the ctrlr is destructed, then
one of the timers can still fire and access freed memory.
Change-Id: Ie5880ab325a28f19361f73712bdeb5b58894ee68
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4935
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When enable Werror compile option with new kernel(v5.8), there is
following error reported due to the <linux/vfio.h> data structure
change(added a uint8_t data[] variable in new kernel), we can just
put the 'unmap' at the end of the data structure to fix the issue,
I think it's better to just use a stack variable instead.
CC lib/env_dpdk/memory.o
memory.c:63:36: error: field 'unmap' with variable sized type 'struct vfio_iommu_type1_dma_unmap' not
at the end of a struct or class is a GNU extension [-Werror,-Wgnu-variable-sized-type-not-at-end]
struct vfio_iommu_type1_dma_unmap unmap;
^
1 error generated.
Change-Id: Icf73a3c48a301e74b92b9ae2e2d8715262b2d056
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4925
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A round of _reactors_scheduler_gather_metrics should be stopped
when there is calloc failure.
Change-Id: Ic2220c561abb07a849ea37d3c88af3f6d5d1ffa1
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4882
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
blobfs_bdev lib is already added into BLOCKDEV_MODULES_LIST
so it shouldn't be included by application who already
uses BLOCKDEV_MODULES_LIST or ALL_MODULES_LIST.
Fixes issue: #1654
Change-Id: I46a272e4593e19cf14c3ed8b2965797443c37a0d
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4876
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Issue:
ctrlr.c:1851:13: warning: Although the value stored
to 'copy_len' is used in the enclosing expression,
the value is never actually read from 'copy_len'
next_pos = copy_len = 0;
^ ~
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Ie6d402cd4ad206ae5713deb15e2d03929bac94f4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4823
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Issue:
app.c:700:7: warning: Although the value stored to 'rc' is
used in the enclosing expression, the value is never actually read from 'rc'
if ((rc = app_setup_signal_handlers(opts)) != 0) {
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I4912d37c8300c88afc7668b792039683addc94c0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4822
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We can verify readdir(dir) directly.
And this fixes issue :
memory.c:1233:23: warning: Although the value stored to 'd'
is used in the enclosing expression, the value is never
actually read from 'd'
while (count < 3 && (d = readdir(dir)) != NULL) {
^ ~~~~~~~~~~~~
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I34b191c9f89d8ae67697ec8e331f9c7c78c16ab2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4819
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Move data used in IO path to the beginning of the structure,
eliminate several holes
Change-Id: I45202f31c888fba32307a8b8ae2b62e7e601a32f
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4760
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If the user decided to disable ICD then we have several side effects:
1. SPDK prints several warnings/errors
2. SPDK doesn't create recv pipe and doesn't set SO_RCVBUF socket option.
I think that we should not rely on ICD only when we create recv pipe or
set SO_RCVBUF since data may be transferred in sgls via R2T/H2C and
we still need recv_pipe and SO_RCVBUF for better performance.
Alternative option is to set recv_buf_size as a maximum between
ICD and io_unit_size
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ida71ecc099f9a9355e4617f13315a341872d1cb3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4755
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This parameter represents the number of control messages to be
allocated per poll group, specific for TCP transport.
The new parameter can't be zero.
Change-Id: I8ae198c0b46e9a5850a80492aa6260f0c6ef885e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4829
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
According to the SPEC we should support up to 8192 bytes
of ICD for admin and fabric commands. Transport configuration
parameter in_capsule_data_size is applied to all qpair types -
admin and IO. Also we allocate resources when we get a connection
request, so we don't know qpair type at this moment.
Create a list of buffer in TCP poll group to support ICD up
to 8192 bytes when configuration ICD is less than this value.
The number of elements in this pool is hardcoded, it is planned
to add a new configuration parameter later.
Fixes issue #1569
Change-Id: I8589e3e2ea95d515f5503c6de7c1ee40aaf7b6da
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4754
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Just always put the config file name in json_config_file,
since we now only support JSON.
If user specifies both -c and --json, it will just take
the latter of the two. This is similar to if the user
specified --json twice.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idc21d73acf0e190eda57a7b0c5d9bcfa14e87030
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4858
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
In TCP NVME initiator with zero copy enabled requests might be
completed asynchronously - out of qpair_process_completions
context. At the same time we calculate requests completed
asynchronously so that generic NVME layer can resubmit
queued requests after calling qpair_process_requests (or
poll_group_process_requests).
But there is a time gap between async request complete and
qpair_process_completions and the user can submit new IO
thereby decrease the number of free TCP requests. That means
that there might be less free requests than we excpected when
we try to resubmit queued requests.
The solution is change ERRLOG to DEBUG log since it is not a
fatal case.
Change-Id: If045ecd331cc6693e8ef450d8e15432dfa5d8812
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4859
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Add RPC that allows to change scheduler at runtime.
Change-Id: I008670f5e936bc25a0fbc923b826277d15343273
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3958
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ide0ac38497bc500886e26fd219cb120113896966
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4152
Tested-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Features:
- does not delay thread creation
- does delay thread deletion
- singlethreaded, but can be made multithreaded.
By being singlethreaded, we don't waste time,
because reactors are not paused during rescheduling,
but we do make statistics less up to date
Change-Id: Ie5a7e8569bc32b3fd4bb887804dfbc3f5c2ea858
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3899
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Move current scheduler to it's own module
and make use of new API.
Change-Id: I4928aed82603d51de01194c9650709e814f7f61b
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4054
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add structures and function for new scheduler API.
Change-Id: I8e379db62189eb7c36092265c137f07368650e9b
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4053
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If interrupt mode is set, related poller functions will be
registered to interrupt_handler instead of poller.
interrupt_tgt can run IO with linux nbd.
Change-Id: I39ecf1efa10be76419fb0d25713ea457a5a53b37
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4274
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Each reactor and each thread is assigned with one fd group.
At the same time, each thread is treated as one interrupt source
registered into its corresponding reactor.
The egrp function for reacotr is the only block point waiting
for events.
Change-Id: Id092e66591b07b445342f8ae16dc218d28887427
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4269
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Interrupt is aiming to support interrupt
mode in SPDK application framework.
fd_group is implemented by epoll on linux.
fd_group can be inserted into thread and reactor
to do epoll_wait internally in order to avoid polling
Change-Id: I9077ad648a97fbd68fd46f43de2e16440bedab0b
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4268
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If the initiator sends a property set command to a valid register, but
the value contains bits that are reserved by the NVMe specification,
don't fail the whole command. Just log an error message.
Previously, any valid bits set would take effect but then the command
would also fail. That confuses the initiator and thinks it must retry
the full property set.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I566bc68c4469b9f41c69902e276f825c86683075
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4814
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Post DPDK 20.08 crypto, isa-l and qat shared object
libraries had their names changed. Detect which library
names are available and use them.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I8c9b9b24f9232f303b99c959754a7f7550ffdf90
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4780
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Suggestions from a prior review... able to remove a boolean by changing
how the batch elements 'index' and 'remaining' are used.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I273e5e231bb30d51eb3ae0a59eec110377d49ab7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4813
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Earlier refactoring enables us to not have to keep track of batch completions in
the batch struct as they're always used sequentially now so we can just add
the addresses from the start up to the number of elements in the batch.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I00cdcdec3376a1c32c9dab72c68fea868c1cb540
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4810
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
And to eliminate an artificial constraint on # of user descriptors.
The main idea here was to move from a single ring that covered all
user descriptors to a pre-allocated ring per pre-allocated batch.
In addition, the other major change here is in how we poll for
completions. We used to poll the batch rings then the main ring.
Now when commands are prepared their completion address is added to
a per channel list and the poller simply runs through that list
not caring which ring the completion address belongs too. This
simplifies the completion logic considerably and will avoid
polling locations that can't potentially have a completion.
Some minor rework was included as well, mainly getting rid of the
ring_ctrl struct as it didn't serve much of a purpose anyway and
with how things are setup now its easier to read with all the
elements in the channel struct.
Also, a change that came in while this was WIP needed a few fixes
to function correctly. Addressed those and moved them to a
helper function so we have one point of control for xlations.
Added support for NOP in cases where a batch is submitted with
only 1 descriptor.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ie201b28118823100e908e0d1b08e7c10bb8fa9e7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3654
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The new design:
* Supports a generic batching capability in the accel_fw layer
that keeps track of hw accelerated vs sw commands based on
the capabilities of the engine and processes sw commands in the
generic layer while sending a list of commands (not a batch)
to the engines for processing.
* Batch completions are managed via the generic layer, when using
the accel_fw the engines only process commands. With DSA however,
if a list of commands is sent down it will use the DSA public
API to create and send batches but will rely on the generic layer
to complete the batch task itself. When using DSA directly, batching
works as usual (DSA handles batch completion).
* The engine function tables were greatly simplified by replacing
all of the individual entries (copy, fill, crc32c, etc) with one
`submit_tasks` function that is used to both send lists of tasks
for batches or just one task for single shot API.
* Internally batching is now used to re-submit tasks that were queued
for flow control reasons.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I99c28751df32017c43490a90f4904bdabe79a270
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3555
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
All options -c, --config and --json are valid, but have to
point to JSON configuration file.
Adjusted UT since JSON configs don't work with --wait-for-rpc.
Since this removes last reference to legacy INI configuration,
updated conf library to no longer mention the deprecation.
All uses of conf library are for explicit reason and not
related to SPDK event framework configuration.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ic9a702465982daf715ce1c2ab863c48584734611
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4752
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If a host matching the removed hosts' NQN exists, it is now
disconnected.
Change-Id: I0bec29eda2dc220114b9197d4eb765899b9e1517
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4684
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI
For virtio-user library and coming vfio-user feature, the client needs
to send the memory file descriptors to target so that the two processes
can setup shared memory region to do data processing without memory copy.
Currently virtio-user will read /proc/self/maps to get memory file descriptor,
since DPDK already provides this such APIs, so here we can just use it,
for existing virtio-user library we may replace it with the new added
API.
Change-Id: Icfeae465d53826d0c8d1b335287634b03cd174aa
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4428
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The current approach checks "rc == 0". It worked before adding
polling of poll group since a single qpair should return 1
completion for its own icreq while poll group can return
several completions for all qpairs attached to this poll
group (but .e.g not for those qpair who is waiting for the
completion).
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I60d05d8d6640e4e2bbaf3cd533d2f5a3637adea1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4768
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Remove spdk_app_get_running_config() that allowed printing
legacy configuration by the apps.
Along with usr1_handler callback that was used to call that
function.
It was only used in iscsi_tgt so it is removed there.
The app_repeat test was using SIGUSR1 to trigger a
spdk_app_stop/spdk_app_start cycle. But we can use
SIGTERM for that instead. While here, do a bit of
cleanup in the app_repeat test app.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie8449e8bcd979b237c68ef94f50fb7a3cb6c19db
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4750
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add support for the ZNS zone management receive command.
An internal nvme_zns_zone_mgmt_recv() function is created
that matches the parameters of the zone management receive
function in the ZNS specification.
Convenience functions are provided for the following
Zone Receive Action: Report Zones.
Zone Receive Actions not implemented: Extended Report
Zones.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I23589a602336da5dffccec7230d07026a868e81b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4793
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add a function to get the number of zones for a zoned namespace.
Since the ZNS specification does not allow zone size == 0,
divide by zero should not be possible on a spec compliant drive.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I15e0ac8a72e244e248b7fb44f7156b182ecd98b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4792
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Add a function to get the zone size of a zoned namespace.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I89429fa2fd36307a8b34bdf91e3251c68596a48c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4791
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI
This patch removes callback function for subsystems to
present their options for legacy config.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I63076fc03eff45da5d57fab03501602922a20e3e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4749
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch removes function for bdev modules to
present options of the bdevs.
blob_bdev.h refers to the spdk_bdev_module, so would need
to be bumped too.
At this time spdk_bdev_module is left unchanged to prevent
that.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3cacb087c998d928c5d8c2722b7f041d82bb43f1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4748
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Add two new public APIs, spdk_nvme_detach_async() and
spdk_nvme_detach_poll_async() to detach multiple controllers in parallel
as a simple manner to users.
Hold the target controller to nvme_ctrlr_detach_ctx because users
will free any object which held it after returning spdk_nvme_detach_async().
spdk_nvme_detach_ctx holds all nvme_ctrlr_detach_ctx in a sequence
by linked list.
spdk_nvme_detach_ctx has a boolean variable polling_started to prevent
the user from calling spdk_nvme_detach_async() while
spdk_nvme_detach_poll_async() is called repeatedly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>i
Change-Id: Ib049c19f7ef24410b963fd5c777a21184f3012d1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4758
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add two new helper functions, nvme_ctrlr_detach_async() and
nvme_ctrlr_detach_poll_async() to make the internal of
spdk_nvme_detach() asynchronous.
Use callback function to remove controller from the attached list after
completing shutdown and before freeing to avoid conflict between
attach and detach.
Update MOCKs in the corresponding unit test cases.
The next patch will add two public APIs spdk_nvme_detach_async()
and spdk_nvme_detach_poll_async() based on this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifbdfec2a1facde9354007c6248f280e245a36eed
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4416
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Following the last patch, separate nvme_ctrlr_destruct()
into nvme_ctrlr_destruct_async() and nvme_ctrlr_destruct_poll_async(),
but keep nvme_ctrlr_destruct() by replacing the internal by
nvme_ctrlr_destruct_async() and nvme_ctrlr_destruct_poll_async().
Add shutdown_complete to nvme_ctrlr_detach_ctx. If shutdown_complete is true,
we can destruct the controller. The case that nvme_ctrlr_shutdown_async()
failed sets shutdown_complete to true. The case that nvme_ctrlr_disable()
is called sets shutdown_complete to true unconditionally.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3994e259f9d3ccf8fede3ac03aadef911eefb9dd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4415
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch is the first of the patch series to make spdk_nvme_detach()
asynchronous.
We have lengthy shutdown notification, i.e., we have to wait a long time
until shutdown processing is completed, in some SSDs. If the running system
has many such SSDs, we see large intolerable delay.
SPDK provides a controller option, no_shn_notification as a workaround.
We can use the workaround if the use case of the detach is to switch to
the next application without system reboot. However, we cannot use the
workaround if we want to do system reboot after detach.
To mitigate such lengthy shutdown notification, we need to parallelize
detachment among SSDs.
Hence the patch series will introduce an asynchronous detach API and
will use the API to parallelize detachment.
This patch adds the following changes.
Introduce a context structure and separate nvme_ctrlr_shutdown()
itno nvme_ctrlr_shutdown_async() and nvme_ctrlr_shutdown_poll_async()
using the context structure.
Name the context structure as nvme_ctrlr_detach_ctx because it will be
used only in internal APIs. The upcoming public APIs will support
multiple detachment and will have the contest structure named as
spdk_nvme_detach_ctx.
Use TSC instead of counter because polling interval will be controlled
by the caller.
Use the convenient macro, SPDK_CEIL_DIV(), to round off the time
value in milliseconds.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9e2355fd24b6d6a4d6c1813577d53822304d4f33
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4414
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add support for the ZNS zone management send command.
An internal nvme_zns_zone_mgmt_send() function is created
that matches the parameters of the zone management send
function in the ZNS specification.
Convenience functions are provided for the following
Zone Send Actions: Close Zone, Finish Zone, Open Zone,
Reset Zone, and Offline Zone.
Zone Send Actions not implemented: Set Zone Descriptor
Extension.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I9cc04776c249d2b9c515438b81a0f06aea4198fe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4682
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Move ZNS specific functions to their own header file:
include/spdk/nvme_zns.h.
This is similar to how it's done for e.g. NVMe-oF with
include/spdk/nvmf.h.
This avoids cluttering the nvme.h header with ZNS specific functions.
A SPDK program that wants to use the spdk_nvme_zns_* functions will
need to include include/spdk/nvme_zns.h, however, this is similar
to how e.g. spdk_nvmf namespaced functions work.
This change is safe to do now, since there is no SPDK release with
ZNS so far.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: If39fab4e7a6924cc3bd67aa0c03e9c6de5f8a324
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4681
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Since namespace types were introduced in NVMe, the CC.CSS register
has a new value (SPDK_NVME_CC_CSS_IOCS) which indicates that all
supported command sets should be selected/enabled. This possibly
includes command sets other than NVM and ADMIN only.
Therefore, if a SPDK application wants enable all the command sets
that the controller supports, it has to explicitly set
opts->command_set to SPDK_NVME_CC_CSS_IOCS.
To avoid possibly a lot of SPDK applications having to set this
parameter, check if the user requested a command set explicitly,
if not, make SPDK automatically use the most reasonable default,
based on the supported bits set by the controller.
The most common case is that you want to enable (all) the command
sets that the controller supports.
A user will still be able to restrict the controller to only use
the NVM command set (or ADMIN only), by setting opts->command_set
to a specific value.
Since the current default command set value specified by
spdk_nvme_ctrlr_get_default_ctrlr_opts() is SPDK_NVME_CC_CSS_NVM,
which is defined as 0, we cannot know if the user specified a
command set explicitly or not.
To solve this, change the default command set value specified by
spdk_nvme_ctrlr_get_default_ctrlr_opts() to CHAR_BIT (0x8), which
is larger than the largest value that can be set in CS.CSS (which
is only 3 bits wide, thus 0x7).
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I45ec148d3667ab87c41fbfb6d6612a1e0e5c9d9c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4701
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch removes legacy config support in iscsi subsystem.
All options through the legacy config are already reflected in JSON.
Following RPCs are corresponding to removed legacy config sections:
Initiator groups - iscsi_create_initiator_group and iscsi_initiator_group_*
Subsystem options - iscsi_set_options
Portal groups - iscsi_create_portal_group
Target node - iscsi_create_target_node and iscsi_target_node_*
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I11326a84d4d580b19db422b8522198eea5a5be0d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4747
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
- Removed slew of conf.h includes
- No longer require mk vars that include conf
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ica7e8e8bf1d4a5d0b0200bfe689aa13afd77bfaf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4746
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Legacy INI configuration is being removed this release.
This patch removes one of its options and always uses the
SPDK_APP_DPDK_DEFAULT_CORE_MASK as default core mask.
That can only be overwriten by -m/--cpumask arguments in app.
In bdevperf there was no reason to set reactor_mask to NULL,
as that was then still using the defaults.
Meanwhile bdev_svc will now check if user provided different
string via command line args to know if it should
unaffinitize its thread.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id882f8d7dbdd07b7743bd5981c37daa888b7872a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4619
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch removes legacy config support in bdev layer.
All options through the legacy config are already reflected in JSON.
Removed configuration can be set via `bdev_set_options` and
`bdev_set_qos_limit` RPC.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I24c365625540659cad425268d2aa41e3bf279d5d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4645
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since legacy config is being removed, SPDK_ACCEL_MODULE_REGISTER
macro no longer needs field corresponding to processing this
type of configuration.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I76ca02487a5fb8f9ecc9d33ac6fa514e7226a03b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4636
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch removes legacy config support in blobfs library.
Mostly reverting patch:
(97f3104) blobfs: Add conf parse for blobfs.
CacheBufferShift option in legacy config is not tested in CI,
and never received corresponding RPC.
If required the RPC can always be added later on.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I54e39f069047a243b2186ae5ea225ed452180488
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4668
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch removes legacy config support in vhost_blk/scsi library.
All options through the legacy config are already reflected in JSON.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia63651cdb7433267d1a8839a1739e68b436e5d08
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4621
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The internal vhost library is used when DPDK's version
is older than 19.05 and the experiemntal vhost nvme
target.
For the CONFIG_INTERNAL_VHOST_LIB option, SPDK doesn't
enable this option by default over one year and CI
doesn't cover it either, so we may remove it with
this release.
As for the vhost-nvme target, since we are developing
a new vfio-user target solution, it's OK for us to remove
it now.
Change-Id: Ib2cce1db99cd09754307c2828b3187f2d4550304
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4562
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
After decoding a JSON object we had to free the parsed
strings one-by-one. Not anymore.
Change-Id: I819f1d533e397aa9babca58b5500c38ac01a963d
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2753
Reviewed-by: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In spdk_file_read and spdk_file_write, __send_rw_from_file always returns 0 and does not return the correct error code,
because req has been released in __rw_from_file_done.
Signed-off-by: JimboLuCN <lujinbo@didiglobal.com>
Change-Id: I4437cf8f1817dbb98bf71b808ad1c544e7b09853
Signed-off-by: JimboLuCN <lujinbo@didiglobal.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4311
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It's not needed. Add it to one of the UT where it
is needed though.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I06628184c22df68deffce3ca0561878569ccf3f4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4717
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
cuse defines the ioctl handler to take an int for
the command, but the kernel uses unsigned int. So
cast the int parameter to unsigned int when doing
the switch.
Fixes issue #1613.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7ef13afc755ee79d8a79b3c7a09dccee7bb7aa1c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4716
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is a drop-in replacement.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3c297b6676b53bae8a308d5732800ac05c4cebc7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4724
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
There are more transport on the way and we don't want to add
all their various opts into the single, generic structure.
We'll pass the JSON structure to transports instead. Then
the transport code can custom pull from the JSON any param
it wants.
To complement that, transports will now also have their own
JSON config dump callback. This was only done in the generic
nvmf.c so far, with conditions for RDMA and TCP.
Change-Id: I33115a8d56cec829b1c51311a318e0333cc64920
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Signed-off-by: jiaqizho <jiaqi.zhou@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2761
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is an error when do following sequences:
1. Allocate an I/O queue pair
2. Do controller reset via spdk_nvme_ctrlr_reset
3. Allocate an I/O queue pair
becaues the free_io_qids was reset and didn't
restore.
Fix issue #1621.
Change-Id: Icd533f171079c12fe03be07e659e8eed9b082384
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4698
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
An issue is reported that connections were left forever without any
progress during login processing.
Not to leave these connections, add the login timeout feature as
described in the iSCSI specification.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Sochin Jiang <jiangxiaoqing.sochin@bytedance.com>
Change-Id: I9483a5b5540b433df6235aa7fc13b99eaca0bfa4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4609
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
DPDK patch (7ba49d39) included in DPDK v19.11
renamed phys_addr to iova in rte_memseg structure.
Meanwhile latest DPDK from (72f82c43) removed the
phys_addr altogether.
This patch replaces the reference for DPDK v19.11 and up.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I24b28d32ec8758d730b14bc54fd0cf1a4cc5a333
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4419
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This issue was only seen in release builds since the
break was hidden under DEBUG. This seems to indicate
we aren't compiling release builds with -werror in
CI.
Fixes: 8a76c2484 (event/app: allow to enable log flag...)
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia5766af1d4a22f9269dd18c47d408a9d05b3ceb1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4714
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
In file included from nvme_rdma_ut.c:36:
/home/clear/spdk/lib/nvme/nvme_rdma.c:651:22: note: ‘bad_send_wr’ was declared here
651 | struct ibv_send_wr *bad_send_wr;
| ^~~~~~~~~~~
In file included from /home/clear/spdk/lib/nvme/nvme_rdma.c:41,
from nvme_rdma_ut.c:36:
/home/clear/spdk/lib/nvme/nvme_rdma.c: In function ‘nvme_rdma_poll_group_process_completions’:
/home/clear/spdk/include/spdk/log.h:132:2: error: ‘bad_send_wr’ may be used uninitialized in
this function [-Werror=maybe-uninitialized]
132 | spdk_log(SPDK_LOG_ERROR, __FILE__, __LINE__, __func__, __VA_ARGS__)
| ^~~~~~~~
cc1: all warnings being treated as errors.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I38ae36756b4bacef7e89f0f1737684c8b8981b12
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4696
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
home/clear/spdk/lib/idxd/idxd.c: In function ‘spdk_idxd_submit_copy’:
/home/clear/spdk/lib/idxd/idxd.c:761:5: error: ‘src_nbytes’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
761 | if (src_nbytes < nbytes || dst_nbytes < nbytes) {
| ^
/home/clear/spdk/lib/idxd/idxd.c:761:26: error: ‘dst_nbytes’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
761 | if (src_nbytes < nbytes || dst_nbytes < nbytes) {
| ~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
LINK lvol_ut
/home/clear/spdk/lib/idxd/idxd.c: In function ‘spdk_idxd_submit_dualcast’:
/home/clear/spdk/lib/idxd/idxd.c:806:5: error: ‘src_nbytes’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
806 | if (src_nbytes < nbytes || dst1_nbytes < nbytes || dst2_nbytes < nbytes) {
| ^
/home/clear/spdk/lib/idxd/idxd.c:806:26: error: ‘dst1_nbytes’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
806 | if (src_nbytes < nbytes || dst1_nbytes < nbytes || dst2_nbytes < nbytes) {
| ~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~
/home/clear/spdk/lib/idxd/idxd.c:806:50: error: ‘dst2_nbytes’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
806 | if (src_nbytes < nbytes || dst1_nbytes < nbytes || dst2_nbytes < nbytes) {
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~
/home/clear/spdk/lib/idxd/idxd.c: In function ‘spdk_idxd_submit_compare’:
/home/clear/spdk/lib/idxd/idxd.c:845:5: error: ‘src1_nbytes’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
845 | if (src1_nbytes < nbytes || src2_nbytes < nbytes) {
| ^
/home/clear/spdk/lib/idxd/idxd.c:845:27: error: ‘src2_nbytes’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
845 | if (src1_nbytes < nbytes || src2_nbytes < nbytes) {
| ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~
/home/clear/spdk/lib/idxd/idxd.c: In function ‘spdk_idxd_submit_fill’:
/home/clear/spdk/lib/idxd/idxd.c:881:5: error: ‘dst_nbytes’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
881 | if (dst_nbytes < nbytes) {
| ^
/home/clear/spdk/lib/idxd/idxd.c: In function ‘spdk_idxd_submit_crc32c’:
/home/clear/spdk/lib/idxd/idxd.c:919:5: error: ‘src_nbytes’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
919 | if (src_nbytes < nbytes || dst_nbytes < nbytes) {
| ^
/home/clear/spdk/lib/idxd/idxd.c:919:26: error: ‘dst_nbytes’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
919 | if (src_nbytes < nbytes || dst_nbytes < nbytes) {
| ~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
CC test/unit/lib/util/cpuset.c/cpuset_ut.o
/home/clear/spdk/lib/idxd/idxd.c: In function ‘spdk_idxd_batch_prep_copy’:
/home/clear/spdk/lib/idxd/idxd.c:1108:5: error: ‘src_nbytes’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
1108 | if (src_nbytes < nbytes || dst_nbytes < nbytes) {
| ^
/home/clear/spdk/lib/idxd/idxd.c:1108:26: error: ‘dst_nbytes’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
1108 | if (src_nbytes < nbytes || dst_nbytes < nbytes) {
| ~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
/home/clear/spdk/lib/idxd/idxd.c: In function ‘spdk_idxd_batch_prep_fill’:
/home/clear/spdk/lib/idxd/idxd.c:1142:5: error: ‘dst_nbytes’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
1142 | if (dst_nbytes < nbytes) {
| ^
/home/clear/spdk/lib/idxd/idxd.c: In function ‘spdk_idxd_batch_prep_crc32c’:
/home/clear/spdk/lib/idxd/idxd.c:1218:5: error: ‘src_nbytes’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
1218 | if (src_nbytes < nbytes || dst_nbytes < nbytes) {
| ^
/home/clear/spdk/lib/idxd/idxd.c:1218:26: error: ‘dst_nbytes’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
1218 | if (src_nbytes < nbytes || dst_nbytes < nbytes) {
| ~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
LINK iscsi_fuzz
/home/clear/spdk/lib/idxd/idxd.c: In function ‘spdk_idxd_batch_prep_compare’:
/home/clear/spdk/lib/idxd/idxd.c:1255:5: error: ‘src1_nbytes’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
1255 | if (src1_nbytes < nbytes || src2_nbytes < nbytes) {
| ^
/home/clear/spdk/lib/idxd/idxd.c:1255:27: error: ‘src2_nbytes’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
1255 | if (src1_nbytes < nbytes || src2_nbytes < nbytes) {
| ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I7f1b01c04e4f7287616c590b652aa5cee26d2901
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4694
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In some abnormal condition, iscsi connections can be exceptional,
add these two infomation for monitoring iscsi connections state.
Signed-off-by: Sochin Jiang <jiangxiaoqing.sochin@bytedance.com>
Change-Id: Ib43128302e8ea057d665e4d6294e28ec7e4f4194
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4613
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Search for md_page to be used as extent page started
from 0, which is completely valid md_page.
This page can be free when for example blob with id 0
was deleted and some other requested a new page for extent.
There are already existing blobs that have extents
pointing to 0, which means unallocated.
Unfortunetly it means 0 can never mean md page 0.
If that already occured for someone, this extent page was already
lost during blob/bs reload and nothing can be done.
With this in mind following assumptions are made for extent pages:
- 0 means unallocated extent page
- UINT32_MAX means we ran out of md pages, and should not be persisted
- [NEW] extent page can never occupy md page 0
That last one is new addition in this patch.
bs_allocate_cluster will now always try to find md page from 1 or higher.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia17ce5bbca2fab4fb4487e4e263f3a0aa120bf17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4314
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When loading a blob and parsing its metadata,
the array of pages was not updated.
Serialization was unaffected, since the current pages
array is unused there.
Behavior was working correctly for first page,
but did not for any blob with more than one page.
Unfortunetly blob_persist_zero_pages() never zeroed out
the pages, neither blob_persist_zero_pages_cpl()
released the md pages.
Resulting in md pages being claimed even after blobs
deletion.
This patch now fills out the active pages array with
the appropriate page numbers from metadata.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6ff1f4fe95684119d283c2471fdbbea464da8151
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4504
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Especially SPDK_INFOLOG() should not call spdk_log_get_flag() function,
instead rely on the log flag structure.
This caused performance degradation in places that used SPDK_INFOLOG
too extensively.
Due to nature of the macros, in the meantime new debug log in
iscsi was improperly named. This wasn't caught because of the
macros reliance on spdk_log_get_flag(), where if name wasn't
registered - no log was printed and no compilation occurred.
Going back to using the structures, gives immediate feedback
that there is no SPDK_LOG_ISCSI log flag.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I262eadb5aee29caa2a5cd719c82ca4963ea24576
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4712
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add an new API spdk_bdev_part_base_construct_ext() to pass not bdev but
bdev_name to fix the race condition due to the time gap between
spdk_bdev_get_by_name() and spdk_bdev_open(). A pointer to a bdev is
valid only while the bdev is opened.
In the new API, spdk_bdev_get_by_name() is included in
spdk_bdev_part_base_construct_ext() and the caller has to know if
the bdev exists or not. Hence spdk_bdev_part_base_construct_ext()
returns return code and returns the created part object by the double
pointer.
Another critical change is that base is just freed if spdk_bdev_open_ext()
failed with -ENODEV. The reason is that if we call spdk_bdev_part_base_free()
for that case, the configuration is removed by the registered callback
and so bdev_examine() will not work.
The following patches will replace spdk_bdev_part_base_construct()
by spdk_bdev_part_base_construct_ext() for the corresponding bdev
modules.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2db027a159559c403cdfbd71800afba590b0f328
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4576
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is just a drop in replacement of spdk_bdev_open().
Hold the passed remove_cb in struct spdk_bdev_part_base, and use
it in the new callback function bdev_part_base_event_cb. The resize
event is not supported for now.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I51c251f04bda13bd6712417010648717f7bf793f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4572
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
For example:
Got JSON-RPC error response
response:
{
"code": -32602,
"message": "Invalid transport type 'rdma'\n"
}
The \n here is redundant.
Change-Id: I30a22f93f2be2550fdbe2af2d90eaa1c381dc7ae
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4655
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This will disconnect all connections to a subsystem from a given
host identified by HOSTNQN.
Change-Id: Ibc9cea1f08a58a05dbac3a0bb47df8d8a58e7c10
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4556
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
There is nothing left here, so remove it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib947d42bc577dbebb4650b1be885e05a80f8f8cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4541
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI
This macro was used in only single place and served no real
purpose.
spdk_log_dump() is more commonly used directly, so use it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Idea720cdee767c7c6cdc30db10003ef42b88c4a3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4540
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Mellanox Build Bot
There is no need to keep the log level in internal header.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I0f732af4a18fd16d9c5b26efc051f122a117a9e2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4539
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Log flags could also report on SPDK_LOG_INFO level by using
SPDK_INFOLOG() macro. Yet this did not result in additional
log due to check for debug build.
This patch allows release builds to use that flag.
Meanwhile the -L option besides turning on particular log flag
changes print log level to SPDK_LOG_DEBUG.
Applied changes to serveral applications to follow the
behaviour of event framework.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib0d6cce33263c350d6d83300d60e7d15bdfe4b64
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4557
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_bdev_get_by_name() is included in spdk_bdev_open_ext() and
when we use spdk_bdev_open_ext() for some bdev modules, for example,
pass-through bdev module, the case that bdev is not found in
spdk_bdev_open_ext() is normal.
Hence change the corresponding ERRLOG to NOTICELOG.
Besides, change the wording to "Currently unable to find bdev with name"
to indicate there is a chance that it will be there later.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I055bce51d1aa7f005efab28359746f17858dfe48
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4589
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
For example, for pass-through bdev modules, it is acceptable that
bdev whose name matches is not found when creating a pass-through
bdev.
The next patch will replace spdk_bdev_open() by spdk_bdev_open_ext()
for pass-through bdev module.
spdk_bdev_open_ext() includes spdk_bdev_get_by_name(). Pass-through
bdev module has to know if spdk_bdev_get_by_name() returned NULL
in spdk_bdev_open_ext().
Hence change spdk_bdev_open_ext() to return -ENODEV if spdk_bdev_get_by_name()
returned NULL.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I525a7118481586161bd0e8c07b96a887c0a04210
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4575
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
Open a bdev whose name matches bdev_name first in spdk_vhost_blk_construct()
to avoid using spdk_bdev_get_by_name() to fix the race condition
due to the time gap between spdk_bdev_get_by_name() and spdk_bdev_open_ext().
A pointer to a bdev is valid only while the bdev is opened.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I99fedd696aa44bb46c1fcc4f49ca37069f7adfef
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4502
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add an new API spdk_nvmf_subsystem_add_ns_ext() to pass not bdev but
bdev_name to fix the race condition due to the time gap between
spdk_bdev_get_by_name() and spdk_bdev_open(). A pointer to a bdev is
valid only while the bdev is opened.
spdk_bdev_open() has been replaced by spdk_bdev_open_ext() but the
issue still existed.
Update the corresponding unit tests accordingly.
Then replace the internal of spdk_nvmf_subsystem_add_ns() by
spdk_nvmf_subsystem_add_ns_ext() call.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifcaa2121129ef22d5e61c9a8f7c640ff37a64485
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4485
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
There are operations on nvmf which depends on proper values of qpair
attributes which can be intepreted as internal state.
e.g.
nvmf_ctrlr_process_fabrics_cmd execution relies on qpair->ctrlr
spdk_nvmf_qpair_disconnect relies on qpair->disconnect_started
As poll group add is like a registration of qpair into nvmf lets try
to initialize it to a defined and expected state.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I10494e7f70ff58ec5460cab1de8a52fd21cc4a48
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4479
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch removes the string from register component.
Removed are all instances in libs or hardcoded in apps.
Starting with this patch literal passed to register,
serves as name for the flag.
All instances of SPDK_LOG_* were replaced with just *
in lowercase.
No actual name change for flags occur in this patch.
Affected are SPDK_LOG_REGISTER_COMPONENT() and
SPDK_*LOG() macros.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I002b232fde57ecf9c6777726b181fc0341f1bb17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4495
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Mellanox Build Bot
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI
Couple log flags did not follow previous scheme of naming
so rename it.
This will simplify next patch that replaces all the literals
with names provided for the flags. Avoiding accidental
changes in log flag names.
SPDK_NOTIFY_RPC -> SPDK_LOG_NOTIFY_RPC
SPDK_LOG_CRYPTO -> SPDK_LOG_VBDEV_CRYPTO
SPDK_TRACE_VBDEV_OCF_VOLUME -> SPDK_LOG_VBDEV_OCF_VOLUME
SPDK_LOG_JSON -> SPDK_LOG_JSON_UTIL
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I00cb0a7994d8aaf28b03828b93b1dbb18215089f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4498
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This makes it more in line with other flags.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ic44821318444dc2ea30771aba06201572ca7ef12
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4537
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In high read IO pressure, there is a loop call of process_completed_read_subtask_list()
while calling spdk_iscsi_task_response(), this cause 'primary->bytes_completed'
changes, in turn cause multiple calls of 'spdk_iscsi_task_put(primary)', assertion
failes in spdk_scsi_task_put().
Signed-off-by: Sochin Jiang <jiangxiaoqing.sochin@bytedance.com>
Change-Id: I41d02d318f827f3bb3ad9ba3a06e080b5113cd40
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4083
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
a pause
This now also takes a lock instead of requiring a pause of the whole
subsystem.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I7de174f3f56d2b3767e723387c4f2257107d8b19
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4581
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The list of allowed hosts is only checked during handling of CONNECT
commands - not in the main I/O path. Protect that list with a mutex
instead of requiring a full pause of the subsystem to allow
dynamic management of the allowed hosts without impacting any
active I/O.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I3f7e87cc1fa6de200c422928c07153fc60fab28c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4555
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The WQ has not been provided a PASID so virtual addressing is not
supported. This worked previously because all test set ups had IOVA=VA.
Change-Id: I6b08714e246a0dc8d5bc0f31efa4b90b601c5b4c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4558
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
I think these two lines code can be simplified one line.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Ibfc876e8de1c5a39cde94ed2ad57b5095a098f3b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4375
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Pack all of the hot data into the first cache line. The first cache line
covers everything up to and including the ctrlrs TAILQ.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I184520661743aec91b3bb3d81e53fe8610c9383e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4554
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This saves 2 bytes and allows it to pack nicely with the
changing state bool (which must remember separate for atomic
operations).
Change-Id: Ibb92ae3c74306e60385ae23d0aaf877f33a69095
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4553
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Pass not bdev but bdev_name to scsi_lun_construct() to fix the
race condition due to the time gap between spdk_bdev_get_by_name()
and spdk_bdev_open(). A pointer to a bdev is valid only while the
bdev is opened.
spdk_bdev_open() has been replaced recently by spdk_bdev_open_ext(),
but the issue still existed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic462422dbc2501c24907f56a36570fbb54fef65b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4482
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We can receive buffer reclaim notifications only when a qpair is
attached to a poll group (so qpair's socket is connected to a socket
poll group).
The previous assumption that we enable zcopy only for IO qpairs was
wrong since IO qpair might not use poll groups too (e.g. abort
application).
Fixes issue #1607
Change-Id: I67329d755d81da6606e65eddfeceb20839346d87
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4476
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Here we add some new variables which we will be able
to use in a later patch to generate pkg-config files
for this env_dpdk library and our DPDK library
dependencies.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8a256096ea08f97eba5d4460405f419624e6f0bc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4468
Reviewed-by: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When we support spdk_nvme_detach_async(), any controller may be
destructed asynchronously. We will be able to know the case by
ctrlr->is_destructed is true and ctrlr is queued in the attached list.
nvme_ctrlr_probe() should fail if the found ctrlr satisfies these
conditions.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I299c2e5ea3c16cc1239899c163bb9e0eb921ade5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4413
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
With new funtion it is allowed to successfully parse json values even
if doceder for given key is not found.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I036f263e9050bd2b96aaa3ff61a9542c98365892
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4340
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Memory allocated for impl_name is not freed in error cases.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: If7cd62d948a05421b0bd5d1599f1275a0f3b4597
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4330
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When uring is enabled, uring socket implementation is
used to create sockets. We may want to use posix sockets
for some reasons (e.g. performance tests). This patch adds
a new API function to set the socket implementation which
will be used by default, e.g. when no impl_name is passed
to spdk_sock_connect/spdk_sock_listen functions.
Misc changes: include spdk_internal/log.h to register
SOCK log component. The new include header already
includes spdk/sock.h and spdk/queue.h, sow remove
direct inclusion of these headers.
Change-Id: I4abad0a59cd033b15bd43a00e3dbdf313fa6b06c
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4327
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Without this change nvmf_ctrlr_create() will fail to lookup
the subsystem listener matching this qpair.
Signed-off-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Change-Id: I855baa16e996737b60dbd745ce84f8c0bc024cf1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4450
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add getters to the ZNS specific data structures, so that an
SPDK application, e.g. examples/nvme/identify/identify.c,
has the ability to get and utilize the information in them.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I26056161093cc811acb6840ff7e2068e5f6058f6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4412
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add a new state in the SPDK NVMe state machine in order to fetch
I/O Command Set Specific Namespace data structures.
Right now there is only support for the Zoned Namespace Command Set
Specific Identify Namespace data structure.
The NVM Command Set Specific Identify Namespace data structure is
all zeroes right now, reserved for future use.
The Key Value Command Set Identify Namespace data structure is not
all zeroes, however, adding support for Key Value is outside the
scope of this patch.
The new NVME_CTRLR_STATE_IDENTIFY_NS_IOCS_SPECIFIC state is added
after the NVME_CTRLR_STATE_IDENTIFY_ID_DESCS state. This is because
we need to have fetched the identifiers in the desc list in order
to know which command set a namespace belongs to.
A slightly nicer design might have been to refactor the NVMe state
machine to first fetch the id desc list, then the identify namespace
struct, and finally the identify IOCS specific namespace struct.
However, since this would have required a lot of changes, it didn't
really seem justified.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I62cbc533c2c3eec1ccf0ba9b1c414d5a70919cff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4368
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add a new state in the SPDK NVMe state machine in order to fetch
I/O Command Set Specific Controller data structures.
Right now there is only support for the Zoned Namespace Command Set
Specific Identify Controller data structure.
The NVM Command Set Specific Identify Controller data structure is
all zeroes right now, reserved for future use.
The Key Value Command Set Identify Controller data structure is also
all zeroes right now, reserved for future use.
The new NVME_CTRLR_STATE_IDENTIFY_IOCS_SPECIFIC state is added
after the NVME_CTRLR_STATE_IDENTIFY state. That way, if support for
the Zoned Namespace Command Set is enabled during probing, we will
fetch the Zoned Namespace Command Set Specific Identify Controller data
structure, regardless if any Zoned Namespaces are attached or not, and
no additional steps will be needed once a Zoned Namespace is attached.
Since we only have one command set to fetch, avoid creating
NVME_CTRLR_STATE_IDENTIFY_IOCS_SPECIFIC substates, although that will
probably be needed when support for another command set is added.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I95535b09b03b7ef2ee9a11eebdbd28aad66d65ba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4367
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When adding an additional state to enum nvme_ctrlr_state, abidiff (1.6.0)
will report that almost every public interface in the nvme library has
been impacted, causing test/make/check_so_deps.sh to fail.
While it is possible that by adding another state, the compiler decides
to use a larger data type for representing enum nvme_ctrlr_state, abidiff
shouldn't complain in the first place, since spdk_nvme_ctrlr is only
ever exposed as an opaque handle. It can never be accessed directly.
Jim Harris suggested to workaround this abidiff bug by changing the type
of spdk_nvme_ctrlr::state from enum to int.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I8b85446580043e95cf791249d643907587e2f982
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4427
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This seems to be causing some CI test failures. So
disable zero copy in all cases for now for client
sockets.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iceea09fe65fb90c7df15f500878a473f1ad4152c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4473
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
DPDK patch (4143b122) included in DPDK v18.05 replaced
MEMPOOL_F_NO_PHYS_CONTIG with MEMPOOL_F_NO_IOVA_CONTIG.
Meanwhile latest DPDK from (28e3c8b2) removed the
MEMPOOL_F_NO_PHYS_CONTIG.
This patch simply replaced the define, since it will
work for any DPDK v18.05+.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I43ada50df31be18c724b2f5078d3f29f3d1c0c71
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4418
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This library has existed since DPDK 17.05, so there are
no supported versions of DPDK that do not contain this
library.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I84f2b77046d093989dfa9533f3d1c76e8c243c3f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4417
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
These libraries have existed since DPDK 17.11. We
do not support any DPDK versions older than that, so
there is no need to conditionally handle cases where
those libraries do not exist.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3906db4d07ae04344b4c3bfaac02da58f248bf75
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4392
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This library was removed in DPDK 2.1 which SPDK has
not supported for a very long time now.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I01cf47078e69b9d396a80f5680a4f1c1c3a9be46
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4391
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Only libraries that are using shm_open require linking
rt when creating the shared library. Stop including
it on every library and just add it to LOCAL_SYS_LIBS
in the one case where it is used (spdk_trace).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic13128873a76c355b14871a0dea0922488c9cd13
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4370
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
LOCAL_SYS_LIBS is meant to define *direct* system
library dependencies for a given library. libuuid
is directly used by the SPDK util library and then
other SPDK libraries use uuid indirectly through
util.
So only the util library should include uuid in
LOCAL_SYS_LIBS.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia0d2d63f48e6f89891164cf2f9dc4c7a6476d4e3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4366
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
In NVME TCP initiator zero copy is enabled for IO qpairs
and disabled for admin qpairs
Change-Id: Ibdf521dccde9b95ec5dd15a5eb2baed8fcf8b88e
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4211
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A preparation step for enabling zero copy in NVMEoF TCP initiator.
This option will be used to disable zero copy
for admin qpair. This is needed since the admin
qpair's socket is not connected to socket poll group
and we can't receive buffer reclaim notification.
Change-Id: Ibfbb8a156aafcd7ba8975a50f790da7fbd37d96f
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4210
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
A preparation step for enabling zero copy in NVMEoF TCP initiator.
With zero copy enabled, some requests might be completed out
of "process_completions" call and we should take them into
account to return the correct number of completions.
Change-Id: Iba7973f6da815645bbfad0334619d46b66379226
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4209
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A preparation step for enabling zero copy in NVMEoF TCP initiator.
We should wait for both events to occur before continue qpair
initialization.
Add a new bit to nvme_tcp_qpair::flags to track receiving of icreq ack
since icreq is sent without tcp_req and there is no way to apply
existing synchronization mechanisms.
Move tcp qpair to initializing state if we receive icresp before icreq ack,
this state will be checked during handling of icreq ack to continue
qpair initialization
Change-Id: I7f1ec710d49fb1322eb0a7f133190220b9f585ab
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4207
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A preparation step for enabling zero copy in NVMEoF TCP initiator.
Since nvme_tcp_qpair_process_completions doesn't process poll
group, we can't get asycn notification from kernel.
1. Add a qpair to poll group before we send icreq in order to be able
to process buffer reclaim notification.
2. Check if qpair is connected to a poll group and call
nvme_tcp_poll_group_process_completions instead of
nvme_tcp_qpair_process_completions when waiting for icresp
3. Add processing of poll group to nvme_wait_for_completion_timeout
and nvme_wait_for_completion_robust_lock since they are used to
process FABRIC_CONNECT command
Change-Id: I38d2d9496bca8d0cd72e44883df2df802e31a87d
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4208
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently host/data digest are bool members of nvme_tcp_qpair
structure. Change the type of this members to bitfield, reserved
bits will be used in the next patches to support zero copy.
Change-Id: If0659bf2445901e45fe0816af5f4fca5f494b154
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4206
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A preparation step for enabling zero copy in NVMEoF TCP initiator.
Make sure that we complete a request (call user's callback)
when all acknowledgements are received. For write operation -
when we received send cmd ack, h2c ack and response from target.
For read operation - when we received send cmd ack and c2h
completed
Since we can receive send ack after resp command, store
nvme completion received in resp command in a new field
added to tcp_req structure
Change-Id: Id10d506a346738c7a641a979e1c8f86bc07465a4
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4204
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A preparation step for enabling zero copy in NVMEoF TCP initiator.
Some NVMEoF TCP targets can send several R2T requests. We should
check that we finished the previous H2C (received buffer reclaim
notification from kernel) before sending the next H2C.
This patch adds a new ordering bit indicating the described case
and 2 fields to nvme_tcp_req to store the values from the last R2T
request which will be applied when send ack is received.
Change-Id: Iaa5ad846712ca18a8382680baa02413c18c4eb37
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4203
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If the capacity of scsi bdev has changed, vhost-scsi should
notify the guest to handle this change.
Change-Id: I1087b28cdb719f6b727ff0ae486cee6a0719bb0c
Signed-off-by: Li Feng <fengli@smartx.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4124
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently, the scsi bdev only supports the hotremove event,
and the scsi library uses the deprecated `spdk_bdev_open` function.
In this patch, add the resize event support, so the upper layer
could do more actions, like vhost-scsi could notify the guest os.
For the scsi compatibility, add _ext suffix for some public api.
Change-Id: I3254d4570142893f953f7f42da31efb5a3685033
Signed-off-by: Li Feng <fengli@smartx.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4353
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This was accidentally bumped twice (3 to 4 to 5) since
v20.07 release.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia5bda3349fa5c1fce37166fe4b640ff722bb7e3a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4421
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
It should be 16 but not 6. For example, it will have 16 priorities
when configuring ADQ with Intel's 100G NIC.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Iebdf7b379c15f3b5fd16dba2ad87ec55af04577f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4235
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We have some RPCs defined in the bdev library itself,
others in a separate bdev_rpc library. There's no need
for the separate library - just move them all into the
bdev library.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I298eedb88924197e64eb315369efb10f402903a5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4364
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is no need to have the application-level RPCs
defined separately from the event library itself
(which defines the application framework).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic264ed761f5ec1a40d604e63395c5740af4be1a6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4363
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The log_rpc library serves little (if any) use in
isolation. It makes more sense to just include
this code in the event library. The event library
already depends on and uses the log library, and it
is natural to just enable these RPCs directly in
that library instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie39b8598ce0c06729a13d188ce00da44a996accc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4362
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This RPC was originally put into the app_rpc library,
but the log_rpc library is a better home for it, since
other log-related RPCs are already there.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7ba5ac6cdeb57fb4219244690590c8fabbc3f59a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4361
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Meanwhile, to verify an issue about git push unittest failure.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Idac60e5832390eb8bdce68aee639be2e9ac6cff6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4373
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add spdk_nvme_ns_get_ana_group_id() and spdk_nvme_ns_get_ana_state()
to getthe ANA group ID and the ANA state of the given namespace,
respectively.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id5f1f7ee488a1eb2a7a77f9986a3bb89146628e0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4354
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add ana_state and ana_group_id to struct spdk_nvme_ns and keep
them up-to-date by updating when spdk_nvme_ctrlr is created or
ANA change notice is received asynchronously. For both cases,
struct spdk_nvme_ctrlr holds the latest ANA state.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I311fe1c8015c8b8ac9659c38661244706c04b3e3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4287
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add an internal API nvme_ctrlr_parse_ana_log_page() to parse an ANA
log page and execute the specified callback function for each
ANA group descriptor in the ANA log page.
We will be able to copy the ANA group descriptor to the caller instead.
To do that, we will need to inform the size of the descriptor first,
but the size will not be constant.
Passing parser to the API will be more convenient.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifd8fda30a83965948017fb8ad992c0d889197cde
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4279
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When creating a controller, allocate a buffer to the controller
and read ANA log page into the buffer.
When receiving ANA change notice, read ANA log page into the buffer
to keep the contents up to date.
The next patch will provide a public API to get the contents of
ANA log page the controller holds.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If5c653f4e80d157e5120bb754e6660250b2b8fa1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4233
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add an internal API nvme_wait_for_completion_robust_mutex_lock_timeout()
and related internal APIs just call it with adjusting parameters.
nvme_wait_for_completion_robust_lock_timeout() will be usable for
the current use cases of nvme_wait_for_completion_robust_lock() and
future use cases.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2b499643930256a39ebe279f56a399f20a7a2fde
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4217
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
No longer required to allocate from shared memory. No tools
use this anymore.
This removes the final call to the event library from iscsi,
so we also drop that dependency.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I41a6877b782cb927d9ac7d206ccd36a8195efc42
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4346
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This was not used by anything. It was intended for use by user-space
TCP stacks.
Change-Id: I416589e421784882c693bcc5b03fe1dbcc4b1bd3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4297
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In the both normal and exceptional case, the mutex
will need to be destroyed.
Change-Id: I39c815f2adffbd3786b45a938c476dcbb66a438f
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4339
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: JinYu <jin.yu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It may have been a long time since the thread last executed
so ensure this time is accurate.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Iaa4c35b50cdc05ebb41724ed9946c5232d242ee3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4321
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
value
If the user passes NULL for the thread, just use the current thread
to get the last tsc.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I1a2b61d9765e1ef59927ffec7c49f2a2b62590f6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4320
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fix some spelling and make the message clearer
Change-Id: Ib291542a9735d6409db84f16c530e78567123f67
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4249
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Unlike ADMIN and IO commands, the FABRIC command is only processed
in the ctrlr.c file.
Change-Id: Ic4e01c7f81c98631a2c7cb603343b301f8ba63e1
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4307
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
With the introduction of namespace types, the identify command has
gained an additional parameter: Command Set Identifier (CSI).
This parameter is similar to the existing parameters NSID and CNTID,
and is not used by all CNS values.
Most notably, the CSI parameter is not used for the existing CNS
values 00h (ID NS) and 01h (ID CTRL).
There are new CNS values, e.g. 05h (ID IOCS specific NS), and
06h (ID IOCS specific CTRL), which do take the new CSI parameter.
The new CNS values instead return Command Set Specific data structures,
which is basically an additional data structure. Therefore, the CNS
values 00h and 01h are very much still in use.
(Even the NVM Command Set has a Command Set Specific data structure,
even though all fields in that data structure are currently reserved.)
Since the CSI parameter is unused by all the existing calls to
nvme_ctrlr_cmd_identify() (since none of the calls send in a CNS value
that uses CSI), simply send in 0 for all existing calls.
No functional change intended.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ia2b2324393a0707152b2f8511f0a22ad4a12bd46
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4309
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The poller is now created internally to the library whenever a target
is constructed. Applications are not expected to poll for connections
any longer.
Change-Id: I523eb6adcc042c1ba2ed41b1cb41256b8bf63772
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3583
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
There are two different is_active() functions.
spdk_nvme_ctrlr_is_active_ns() which iterates through the active_ns_list,
and spdk_nvme_ns_is_active(), which simply checks the nsdata.
There is an event callback that refreshes active_ns_list when a relevant
events has occured.
In nvme_ns_construct(), nvme_ctrlr_identify_ns() has just been called,
so we know that nsdata is as fresh as possible.
Hence, there is no reason to iterate through a less fresh active_ns_list.
Since we know that the nvme_ctrlr_identify_ns() call was done through the
same controller, we also know that the active/inactive is from the
perspective of the correct controller, so that is not a reason to use the
less efficient is_active() function.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I185f59b53e16e70163e33a3909f4b55ebf631cc4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4293
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Since the command set identifier might be accessed at several
different states in the nvme state machine, cache it so that
we don't need to loop through the ns id desc list every time.
This is similar to how other identify fields are cached using
nvme_ns_set_identify_data().
None of the identifiers in the desc list (including the new CSI)
can change over the life time of a namespace, so caching them
should be safe.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ie06180a4b3750dfa1a42f47afe0f7f9e3ec04ba9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4266
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If the nvme completion was an error, the function will return,
so there is no reason for an else statement.
In fact, the else statement in nvme_ctrlr_identify_ns_async_done()
differs from the coding style used in other nvme_ctrlr_identify_*
functions, and arguably makes the code harder to read.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: If76b823b7ca04ab98abb2912927c344ee9f12314
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4265
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Clear the ns id desc list in nvme_ns_destruct().
Without this, someone can get stale data by calling e.g.
spdk_nvme_ns_get_uuid() on a destructed namespace.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I965dd4cd6101d3a77eddbd582b9618b3436d39c8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4263
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When we disconnect a qpair, part of the code path is
calling _nvme_qpair_abort_queued_reqs. This takes
care of aborting any requests that were queued waiting
for slots to open on the submission queue.
It walks the STAILQ one by one and manually completes
them with ABORT status back to the caller.
But if the callback path submits another request, this
request may also get queued to the end of the queued_req
TAILQ. This can result in an infinite loop.
The solution is to use an STAILQ_SWAP to a local, empty
STAILQ. Then we ensure we only abort the requests that
were queued when _nvme_qpair_abort_queued_reqs() started
executing.
Fixes issue #1588.
I used the multipath.sh test to reproduce this on my local
system. If it ever dropped into the STAILQ loop in this
function, we would hit the infinite loop. With this patch,
I confirmed locally that now we safely avoid the infinite
loop and the test passes.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I657db23efe5983bd8613c870ad62695a7fc7f689
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4284
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Remove some of the boilerplate code from each case and
replace with just an spdk_msg_fn assignment.
This also reduces the size of an upcoming change needed
in this function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia209073cfb66032f2cca6bb44a09e1984ef2110c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4257
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When the vhost-scsi target needs live recovery, check the inflight share memory,
and resubmit the inflight io.
Signed-off-by: Li Feng <fengli@smartx.com>
Change-Id: I785476c8835053a4e8d4f1d692437feaf3a9ace1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4092
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Rename ordering bit r2t_recv to h2c_send_waiting_ack, that is more
descriptive name.
Change-Id: I6d6143ff4c1cccc74e11226b7974706808092f9a
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4202
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This makes it easier to zerofy ordering bits.
Change-Id: If5696bfedfff1bf75e41c1449eac7fccb469e98b
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4201
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
The issue happens when SPDK RDMA initiator is connected to a remote
target and this target reports rather small (or zero) ICD and we try
to send several SGL descriptors.
Since SGL descriptors are located in ICD, we should check that their
total length fits into ICD. In other case sending such a command
will cause RDMA errors (local length error)
Change-Id: I8c0e8375dae799bc442ed2fab249cad2c4ccce51
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reported-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4131
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
uint32_t supports at most 2TB at most, we need to handle
the larger blobstores, fix this overflow problem.
Signed-off-by: Sochin Jiang <jiangxiaoqing.sochin@bytedance.com>
Change-Id: I27950eb759e9cb9ad48fa4aa8dd1976b4e852832
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4075
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In C language, we cannot use constant at compile time. Hence the
local array _ana_desc[] is not a fixed size array but a variable
length array.
We can avoid using variable length array by changing const variable
to macro constant.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7333a8078d3102c4bd5088f56f6530846854c85f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4093
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add an new RPC, nvmf_subsystem_listener_set_ana_state.
Find the specified subsystem listener, and then set the ANA state
of the listener by calling nvmf_subsystem_listener_set_ana_state().
By adding a string and an enum to the existing context structure,
nvmf_rpc_listener_ctx, and adding an operation type to the existng
enum, nvmf_rpc_listen_op, reuse the existing code and data as much
as possible.
Besides, insert line break into a few long lines and fix wrong
error log.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6fb2dfbb1f9c5f56848eba21d2a733fbed802614
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4080
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add an internal API nvmf_subsystem_set_ana_state() to change the
ANA state of the subsystem listener whose trid matches.
ANA optimized state, ANA non-optimized state, and ANA inaccessible
state are supported. ANA change state is not used and ANA persistent
loss state is not supported.
After changing the ANA state of the subsystem listener, on each poll
group, controllers, whose the subsystem listener match, send ANA
change notice.
Initiators query ANA log page anyway if they receive ANA change
notification. False positive notification should be avoided but is
acceptable.
To avoid any concurrency conflict, simply compare ctrlr->listener and
the passed listener.
It may be better to execute nvmf_subsystem_set_ana_state() on the
subsystem thread but currently the RPC thread adds and removes a
listener to and from the subsystem, respectively, and the subsystem
has been suspended while executing nvmf_subsystem_set_ana_state().
Hence we keep this as a future enhancement.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If1910b79dd33d904114e258ae2c5e868947cdc52
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4079
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
If the ANA reporting feature is enabled for the subsystem,
- set ANA Change Notice of Asynchronous Event Configuration to 1
- set ANA Change Notice of Optional Asynchronus Event Supported to 1
- set ANA Non-Optimized state and ANA Inaccessible state of ANA
Capability to 1.
ANA Change state is not used and ANA Persistent Loss state is not
supported for now.
The next patch will actually support ANA Change Notice using an new
RPC.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4db2e33dd2879cdf995adcab41ef53728b27a201
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4087
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In cases where the SPDK nvme driver is being used as a validation/test
vehicle, users may need to allocate a currently unused qid that can be
used for creating queues using the raw interfaces. One example would be
testing N:1 SQ:CQ mappings which are supported by PCIe controllers but
not through the standard SPDK nvme driver APIs.
These new functions fulfill this purpose, and ensure that the allocated
qid will not be used by the SPDK driver for any future queues allocated
through the spdk_nvme_ctrlr_alloc_io_qpair API.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I21c33596ec415c2816728a600972b242da9d971b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3896
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If we are already in the desired state,
just call the callback directly from the
subsystem_state_change function. That way
we save a lot of message passing.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I6cf8563524610d9125d53266e3c0e179e064bf63
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3760
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is important to avoid doubling up on state changes
and hitting asserts.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: If8797ea13a5c224cee85e53e9b2542012423b37f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3759
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We still need to be able to explicitly set specific
bits in the cluster array during initialization and
loading (especially recovery), so we use a bit_array
during load, and then convert it to a bit_pool just
before calling the user's cmopletion callback.
This gives a roughly 300% improvement over baseline
on a benchmark which does continuous resize operations.
The benefit is primarily from saving the lowest free
bit rather than having to always start at bit 0. We
may be able to further improve this by saving extents
in the bit pool as well, although after this patch,
the benchmark shows other hot spots different from the
bit search.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idb1d75d8348bc50560b1f42d49dbe4d79d024619
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3975
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_bit_pool is a wrapper around spdk_bit_array with the
intentions of providing much better performance for allocating
from a fragmented bit array. The cost of searching a large bit
array for a cleared bit can become expensive so the spdk_bit_pool
will provide an ability to track extents of recently cleared
bits.
This initial commit does not adding the tracking yet - it is strictly
a wrapper around spdk_bit_array with enough functionality to replace
the use of spdk_bit_pool in SPDK blobstore with equivalent performance.
This will allow us to switch blobstore to use this minimal
wrapper first, and then iteratively improve spdk_bit_pool to provide
the better performance.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I95d0d12db47eac73e0641eb7f94fa5df43d42e45
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3974
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
The ctx allocation was duplicated after both bs_alloc
calling sites, so this reduces the code a bit. This change
also enables some future changes involving the used_clusters
bit array.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4ea98f079dbe385654e9cb9c0c58a1926a990c9e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3973
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This will allow for some additional simplifications
in future patches.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie421ad35f8c0efbb775fbe6bf85799af515264ef
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3972
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This prepares for some future patches.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If63c83f76e839b796c58200ddb0ca2137fbc4288
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3971
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Have it both find and set the lowest available cluster
bit index.
This will temporarily hurt the performance for cluster
allocation, since it will always search starting at
bit index 0. But upcoming changes in this patch set
will fix that again by using a new spdk_bit_pool object
that will do allocations much more efficiently than the
current implementation here.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iad199c9166b82cb9a31597a080f5a28823849e60
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3970
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently if we create a blob of 128 clusters, we
lock/unlock the used_cluster_mutex 128 times - once
for each cluster. Same when those clusters are released
when the blob is deleted. Batching these lock/unlock
operations is very easy and gives a noticeable
efficiency improvement.
My local benchmark (1GiB ramdisk, 4KB cluster size,
128 clusters/blob) creates enough blobs to fill the
blobstore and then continuously deletes and recreates
them. Performance increases 20% on that benchmark
with this patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic503accf1ca1ab1af7254b4067771d956f52014d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4069
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This may happen when resetting a controller, if the ADMIN queue failed
to reconnect, the controller is set to failed state, so for this case
we don't need to loop until timeout, just exit.
Change-Id: I2b37af5453086cd64f3609c41eb8f6475da55fd4
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4143
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: JinYu <jin.yu@intel.com>
There is no need for this interface to be async.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I1f21b53e90b7d165b6b5fb2e1226ce7591966b58
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4181
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
It was introduced for the purpose of executing fabric cmds when
subsystem and qpairs are not active. It was rather workaround than
solution for transport type like vfio-user. spdk_nvmf_request_exec
is a preferred way of passing request obj into nvmf layer.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I4f989de27bfd494c744017599909c2e200f0f233
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4180
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
If ctrlr->cdata.cmic.ana_reporting is 1, set the corresponding
field to true.
Then use its API in the identify application.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4e74bc4c114883e4aecdbee7a6f1a02027db23a5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4156
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch is used to enable placement_id getting
in sock layer and also add the rpc support.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I70de57b0ed392a0aefce9d3ff1f61ef924015a87
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4146
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add support for getting the Command Set Identifier for a given namespace.
The SPDK_NVME_CAP_CSS_IOCS feature can be implemented on top of an old NVMe
specification. If the feature is set, retrieve the NS ID Descriptor List
regardless of the NVMe specification version. The quirk is still respected.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I7b257115ecb0d813ba75201c0f48960c7070dcc9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4085
Community-CI: Broadcom CI
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Warn if found UUID descriptor length differs from NIDL for NIDT_UUID.
This will help identify non-compliant NVMe controllers.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Idf0daff9996147f38413318d1cd7fc3f929c5ce4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4138
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add an new RPC, nvmf_subsystem_get_listeners.
ANA state is per listener and per subsystem, and is stored in
subsystem listener. We can return ANA state by the existing
nvmf_get_subsystems RPC but it's confusing that listen addresses
have ANA states.
To change ANA state, we will provide a RPC to change ANA state of
only one selected subsystem listener.
To query ANA state, it will be convenient to get ANA states of all
listeners of one selected subsystem.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic3baad6eac65d7af6e0cab2c4059e1458d41e6e2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4059
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Data structure and macro constants for multiple listen addresses
and namespaces are not used anywhere in nvmf_rpc.c
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idd8bc61e22f9e9918a88f017a024cab239ff5e53
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4060
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add an new RPC, nvmf_subsystem_get_qpairs to retrieve the list of
qpairs of an NVMe-oF subsystem.
This RPC will be usable to verify if NVMe ANA works.
Pause and resume the subsystem to access the qpairs safely.
One subtle issue remains. The JSON RPC returns success even if
resuming the subsystem fails. Write FIXME to address this.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9d90a01b1117dee00d85b2e21b4f4d02d80db531
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4050
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Some of the functions were only referenced directly.
There is no need to use void* or pass any bserrno,
in some cases.
Let's be explicit.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib26dda7068965838f38dad856ea1e456fd87a655
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4061
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This looks like a major omission on persist path.
Especially visible for cases where blobstore was not
reloaded between blob creations/deletion.
Added writing out zeroes to md_pages that contained
truncated extents (resized down).
After zeroes are writen out, md_pages for those extents
are released. In case of blob deletion, extents are
resized down to 0 so all extent pages are released.
Fixes#1590
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I9a2a1190e3f1f3b5d1bb806191c1fe4d27df7780
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4051
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Usage of spdk_thread_get_count is wrong since there might be many
threads allocated by other modules. Transport buffers are used by
transport poll groups, their number is equal to the number of cores.
Change-Id: I4bc748e93c3b204bf3b3ec73f17257b927a7f428
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3882
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When we try to evenly divide transport buffers between poll grouos,
e.g. when we run spdk_tgt on 8 cores, set num_shared_buffers=32768
and pg buf_cache_size=4096, the last pg can't retrieve enough
buffers to fill cache. In my case if only got 4040 buffers out of
4096. Missing 56 buffers were cached by previous poll groups.
That occurred due to mempool has per lcore cache of 512 elements
and when it becomes empty, the cache is refilled. It seems that
each poll group cached extra 8 buffers.
The issue doesn't occur when we use mempool_get_bulk.
Change-Id: I866d58aa03986a3cffe27402b12f9a2519097f83
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3881
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In production environments, there could be large numbers
of uevents other than nvme hotplug events. We want to
ensure we never lose an nvme uevent due to ENOBUFS
(i.e. overflow). So allocate a bigger receive buffer
for the netlink socket to ensure we never lose any events.
We only allocate one netlink socket per SPDK application,
so the extra memory consumption is not really a concern.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I663fbb093516a01a8980a1517245f92d8c76f7aa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4070
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There are two bugs:
1, When the target response 0, it means target does't
support keep alive.
2, Change the interval time to us so when the keep alive
timeout is 1ms then the interval is 500us.
Fix github issue: #1565
Change-Id: I75707ab0e4e639209a9c50ef326492fae213044d
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4077
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Factor out the internal of rpc_nvmf_subsystem_get_controllers() into
a function rpc_nvmf_subsystem_query() to use it for the upcoming RPC,
nvmf_subsystem_get_qpairs.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibe62bcfadf6b33ef26c018a3667f280b6fcd8fdf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4049
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
For nsid, use SPDK_NVME_GLOBAL_NS_TAG rather than raw number
0xffffffff wherever possible.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I23e989786263172e13bab40c011cf58beb06fabf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4055
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This can happen and we should make a best effort to return
the subsystem to a coherent state when it does.
maybe fixes: issue #1416
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ic3d0376984733e6664295305be82fca678c515b3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3437
Community-CI: Broadcom CI
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This can happen and we should be prepared for it.
Maybe fixes: issue #1416
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I77f48dbcabf702f88df56ad7e866bbcb830fc239
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3393
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
And modify test/env/vtophys to resolve linking errors.
SPDK_PRINTF() and SPDK_ERRLOG() use spdk_log() procedure which is
customizable and redirectable, so it is preffered over printf()
In case of test/env/vtophys/ program,
we have to make it an app first to avoid linking errors.
Change-Id: Id806ec3bb235745316063bbdf6b5a15a9d5dc2d9
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1944
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
After a submission queue is deleted, the device is supposed
to post completions for every command to the completion queue.
Previously, we never looked and completed all commands with
an ABORTED status. Instead, complete any commands in the
completion queue with the status the drive gave them.
Change-Id: If851a365d4f305cf4390454b6b26dd0f7c5b82ac
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3875
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For I/O commands, block them if ANA state is inaccessible, persistent
loss, or change.
For Identify command, clear capacity field (nuse) to 0 if ANA state
is inaccessible or persistent loss.
For Get Features command, block features, error recovery, write
atomicity normal, reservation notification mask, and reservation
persistence if ANA state is inaccessible, persistent loss, or change.
For Get Log Page command, error information page does not return
any data yet, and hence there is no change.
For Set Features command, if ANA state is inaccessible or change,
block the command if NSID is 0xFFFFFFFF or if feature is error recovery,
write atomicity normal, reservation notification mask, or reservation
persistence, or if ANA state is persistent loss, block the command.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I15dd593227e451aa2247c53da42b6acad1757907
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4043
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add ANA state to struct spdk_nvmf_subsystem_listener and initialize
it to optimized.
Then ctrlr->listener->ana_state is referred when creating ANA log page.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I978424e51d3f23ca72dee30192bc2693abfe203d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4012
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We will have ANA state per listener and per subsystem. On the other hand,
NVMe specification defines ANA state per controller.
However, it is possible that I/O qpair and admin qpair are different
listeners on a single controller.
Let's check if I/O qpair is on the same listener as admin qpair if
ANA reporting is enabled.
The case that I/O qpair is on a different listener from admin qpair
is not usual and so the purpose of this check is just to guard SPDK
from any unexpected behavior.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idb8d255de7f998e45a59a120c2ed5803258873f4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4026
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Find the subsystem listener whose trid matches req->port->trid when
creating a controller, and store it in the controller.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iea343b8d8ae827b554df2245b67aed113469c592
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4010
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add trid to struct spdk_nvmf_qpair and initialize it at initialization.
admin_qpair->trid will be used to get the corresponding
subsystem_listener via nvmf_subsystem_find_listener() and add it to
struct spdk_nvmf_ctrlr in the next patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0d1a41aede60de88747eff16c7e04f63d0702596
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4009
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The new function () will be used in the following patches.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I788cfb38d75c3f1f64e1754912b776a80f0f1be8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4007
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
nblocks is zero based, so read path was missing the increment.
NVMe device that cuse represents can be of any block_size,
so rather than hardcoding 512 - actually verify it.
Both paths didn't request enough of a buffer from cuse.
Reported-by: Niklas Cassel
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I228dc2572bc94ecbcb913e950d912a7ab5be9434
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4037
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch does not alter functionality, just moves
around where cuse_device and block_size is determined.
Next patch will fix both paths.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5a827b5b4ab080b2aa0f76f5cdcbcb177b38b474
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4036
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Socket message VHOST_USER_SET_VRING_ENABLE will use number of
vring entries as input parameter to indicate the vring is
enabled or not, previously the flag in vhost-user library
wasn't checked before commit d0fcc38f5
"vhost: improve device readiness notifications", so here
we also use correct filed set in SPDK.
Fix issue #1583.
Change-Id: If5ac8a4ba31bdecbb5a64b736346c99e4be0f4b6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3989
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We stopped the poller to early, so we were not able to
reap all completions on ibv CQ, so RDMA qpair was not freed.
This patch stops the poller when all references to poll group
are released (all qpairs are destroyed)
Fixes#1578
Change-Id: I15c1697db13aef9da7567c7312476306c3ee1d62
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3962
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When tested on Linux 5.8 kernel and configure spdk
with debug mode (--enable-debug), and test SPDK NVMe-oF
tcp transport, and we see the coredump in sock_map_release
with the following statements:
assert(entry->ref > 0);
After debug, I can confirm that the placement_id value got
from the following function (sock->net_impl->get_placement_id)
changes.
It means that: When the sock is added into the poll group
(spdk_sock_group_add_sock), we get the placement_id (named as
Value(begin)); and when the sock is removed from the poll group
(spdk_sock_group_remove_sock), we get the plaemednt_id on
the same sock (named as Vaule(end)). I found that
Value(begin) ! = Value(end).
So our solution is for a socket, we will get placement_id once,
then we can solve this issue.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ia1d0cf39247b53410260561aca5af38130cc0abb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3983
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We will use it earlier in this file in a future patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I554f2073185d466bd0b4e98bdeec721f763c1b44
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3969
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When claiming clusters as part of blobstore initialization
or recovery, just call spdk_bit_array_set directly rather
than going through the bs_claim_cluster function. We will
be modifying how runtime cluster allocation works so need
to separate the two use cases. This code is very small so
inlining it has minimal code impact.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaaa1c817e57b4a2eea62eb4683407364bac1fcc0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3966
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
These functions were added during FTL development and
are more efficient than the roll-your-own implementations
blobstore had previously.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie09e5c305e6e171af0258e805f2aac3b88822b5e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3965
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Allow toggling log timestamps on and off by adding new RPC call.
Change-Id: I34c84bf89fae352ade266fbf7fd20594ff67bced
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2024
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Remove assert and add exit codes instead. That in non-debug mode, these
could lead coredump. We don't want the vhost target be crashed after
recieved invalid commands.
fixes issue: #1575
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Ifef6d8f9c32150213bc2c80787e92d428d4c49c3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3951
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: JinYu <jin.yu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
cpumask can be changed by spdk_thread_set_cpumask()
during the time that event takes before it arrives
on _schedule_thread() function, which would make the
function assert(false), even though that is ~ok~.
Currently, that can happen right after thread is created
or between two successive calls to spdk_thread_set_cpumask().
But most importantly, it will constantly happen if we
introduce rescheduler.
This patch just disables the check for now.
Change-Id: Ie6dfe22d6eff2c908c367d1311436cc6769a6960
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3905
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When the PDU receive handler processes the header of the logout request PDU,
conn->is_logged_out is set to true.
However, if conn->is_logged_out is true, conn->pdu_recv_state is set to ERROR
before the PDU receive handler completes processing the logout request PDU.
Then if conn->pdu_recv_state is ERROR, conn->state is set to EXITING
after returning from the PDU receive handler.
Response PDUs are sent asynchronously now and may not be sent even after
returning from the PDU receive handler.
On the other hand, outside the PDU receive handler, the current connection
is closed if conn->state is EXITING.
Hence logout response PDU may not be sent to the initiator.
For the case that the initiator logs out and then reconnects when receiving
asynchronous logout request, missing logout response is critical
because initiator waits until receiving logout request and gets timeout.
This patch moves the check if PDU comes after logout to the place
just after getting a PDU header.
At the new location, data segment of the PDU is not received yet. But
logout request PDU does not have data segment and initiator will not
send additional PDU after sending logout request PDU, and by this patch,
iSCSI target will continue to stop receiving any new PDU after processing
logout request. Furthermore, even if there is any remaining data in the
kernel buffer, the kernel will discard or flush it when closing the socket.
Fixes issue #1571
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9554f4d54f3db80bf86abd6bffe81bac8c234531
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3928
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
ANA transition time shall be non-zero if controller supports ANA
reporting. Linux NVMe host sets this value to 10, and we don't
have any reason to change from that.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I61396695dacf47fad40e3cea3311e555729d9e3e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3909
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Registration macro now generates function based on driver's name.
It allows to have multiple registration within single source file.
Similar pattern is used e.g. by SPDK_NVMF_TRANSPORT_REGISTER.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ied0887e8dae7fe9ca1517313be5eff8f218b7e98
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3895
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
