SPDK iSCSI target didn't convert LUN ID from integer to structure
when it sends R2T PDUs. The next patch will fix the issue. Introducing
helper functions into SCSI library and using them will be clean. Hence
this patch adds two helper functions to convert LUN ID between structure
and integer.
The logic of helper functions is derived simply from the current
implementation in SPDK.
Change-Id: I114b546cfcb44109d6cd131a1fa972f4d6bfea38
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449962
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We were only using one enum from this whole struct, so there is no need
to store it. Plus the queries we use to update it are so infrequent and
only occur during connect and disconnect so I think we can save quite a
bit of space by removing this without compromising performance.
Change-Id: Icf29977a3c10cb289564fa2760a0059f07a0f8cb
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448072
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There was a lot of duplicated code here between states. I'm trying to
minimize the duplicated code without making it confusing.
Change-Id: I13183431e554c8a9f501b3385bbd7b59e2c83161
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448066
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Catch an edge case where a multi sgl request is longer than the allowed
transfer size.
Change-Id: I79779050fe951d16f1240e2c3d8cf5037e576ea2
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/440766
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is important to avoid thrash when we don't have enough buffers to
satisfy a request.
Change-Id: Id35fd492078b8e628c2118317f674f07e95d4dba
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449109
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
While useful in NVMf target, this is really annoying
in the consolidated spdk target, where NVMe-oF doesn't
even have to be used. OCF tests currently use iscsi_tgt
just because spdk_tgt requires the additional [Transport]
section in the cfg file. Let's remove that requirement.
Change-Id: I418b47d62dcc06b9513f9f0496dc1e39b9d5a554
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450056
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Right now they can only use memory from the socket
that performed iSCSI static initialization, which
doesn't make sense. Those mempools can be used from
a different socket as well, so don't restrict them
to any specific one.
Change-Id: I0def1c554ed6227ab0f0a7be107c4c1c61f40c96
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450055
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Relaunch queue poller on put_io_channel callback of OCF bdev
to delay thread shutdown. New poller will finish all pending
OCF requests as there might be some even after all SPDK IOs
completed.
This solves the issue of OCF not being able to
complete all its work because of queue poller getting
unregistered in callback of put_io_channel.
This patch also changes unregister procedure:
we call ocf_cache_stop in callback of io_device_unregister
instead of in callback of bdev_unregister.
Change-Id: Ib7e41fc25e71029a73bb76a62e39e6bf4b8189ce
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/444276
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
vbdev_ocf_delete function accepts callback now.
RPC delete_ocf_bdev is also updated to adopt this change.
Change-Id: I1d357a5e37015268e28c07fd81dc35f48ec80ab8
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449777
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The buffers are really specific to the request and not the wr or data
object. In the case of multiple wr requests, the maximum number of
buffers per req is equal to the number of SGEs in the NVMe-oF request
*2.
Change-Id: Ic59498bfed461d180adb2fb9a481ac5b11fa9252
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449108
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Enable parsing an nvmf request that contains an inline
nvme_sgl_last_segment_descriptor element. This is the next step
towards NVMe-oF SGL support in the NVMe-oF target.
Change-Id: Ia2f1f7054e0de8a9e2bfe4dabe6af4085e3f12c4
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/428745
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This also means that the RocksDB threads don't need
to be SPDK threads any more.
Change-Id: Icadd6dd446958ebf470ad8ab8239f5390942eb87
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449465
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In the next step, this won't be a channel at all.
Change-Id: Ia8fe4da5b0b283e8dfc5c6477b84cfdd346d89a0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449464
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When we decompress, pass the size of the compressed
data - not the size of the buffer itself.
We also need to remove an assert that's no longer
true since we can now handle compressed chunks.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifb7896db12ccbefdd49815b5037af11ddd82e625
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449513
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Most typically, the error will be -ENOSPC, meaning the
destination buffer wasn't big enough to hold the compressed
data. But even for other types of errors, just write the
uncompressed data rather than treating it as an I/O
failure.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id6526cab95488a1a587b183237f9980c83287761
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449511
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Test functions to be added later in series
Change-Id: I96286b6214b4577df334d180e7c3d641e8ce8f68
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445371
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
My iSCSI target reported segment fault after memory allocation
failure, and add the addtional check here can fix the issue.
Change-Id: Iee3e497d7028fbface6d110c78e73965ef0f178b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449717
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
lvol should not only be freed but also removed
from lvols list when deletion fails.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I3a047e1cc611e71b1544ca77c256a879dd2efdae
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446619
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It's not standard to put a newline here - let's use a null
character instead.
Found while using nvme-cli - when creating a subsystem with
default serial number, the right justified callout text had
an extra newline in it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8a81dafb4f6c30f7bf2dcebfa7a5b19cfe3ab5fc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449645
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Fixes#726.
This prevents a segmentation fault by checking the pointer
before accessing it.
Change-Id: I18a3776fbcd6242c6efd1b88044debaa88c7342f
Signed-off-by: Claire J. In <claire.in@circuitblvd.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449591
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Misc cleanup from earlier patches, some naming issues and other
minor things that are needed before adding UT.
Change-Id: Ic76f0e2fd12e48782b048fb8785902b1098cf352
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436227
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is starting point for metadata refactor
which is needed for efficient ANM events support.
Change-Id: I81d864605e69008d8e3922fb61adf504187447a1
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449328
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: Ib9fb94463a69ffd9660ab2c7fbe02826a7e06741
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449796
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When bdev is registered it will send "bdev_register" notification and
"bdev_unregister" when unregister is complete.
Change-Id: I3b37a4cb766a473f3da63a571036add366e78fa5
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448839
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A few private functions had still the prefix spdk_ in their names.
This patch completes the effort to remove the prefix spdk_ from
private functions in iSCSI library.
Change-Id: Ic1a1e85220edb72296ca4881bdf7b550c4f6b6b8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449716
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fixes#722. The state was set in nvme_ctrlr_identify_id_desc_async
Signed-off-by: cranechu <cranechu@gmail.com>
Change-Id: I232f0035e8c45d49eca2de7174c91860a299d804
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449527
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Replaced tpoint_ids generated based on the properties of the IO with a
static list of tpoint_ids, to fit inside the per-group maximum tpoint
limit (64).
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ifb8b8637a1e6d8f0e7fd3f4363b97fdbedcdb8d5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448067
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
When you connect a iscsi lun as a bdev, and the lun id is not 0,
all IOs will fail.
We should use the correct lun id in libiscsi.
Reproduces like this:
./scripts/rpc.py construct_iscsi_bdev -b iSCSI0 -i
iqn.2016-06.io.spdk:init --url
iscsi://127.0.0.1:3261/iqn.2016-02.com.smartx:system:fl-iscsi/1
Signed-off-by: Li Feng <fengli@smartx.com>
Change-Id: I2480e866fdda17426362aca3cb30b7e90c927547
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449318
Reviewed-by: Kyle Zhang <kyle@smartx.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
iSCSI library had used the prefix spdk_ for most functions regardless
of private or public. Using the prefix spdk_ only for public functions
will be helpful to distinguish private and public functions, and
will be helpful to investigate issues or do further improvement.
Besides in iscsi.c static variable spdk_arc4random_initialized had
the prefix spdk_, and change it to g_arc4random_initialized according
to the SPDK's good practice.
iSCSI library still have some issues but is more stable than before
and now will be the good time to adjust the naming rule to other
libraries.
This patch doesn't change any behavior.
Change-Id: Ia0b8585a7ce6662cabc0e6f57b7ccb8a40342297
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449396
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
These function declarations are not used.
Change-Id: If525f4157e3fa9e5d718e6c7aa77db8584edd14c
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449395
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds library that will provide ability to notify about
events. On one side each spdk library can specify what kind of
notification it can produce and on the other side libraries can fetch
those notifications.
Example is bdev module, which lib notify about added or removed bdev.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Change-Id: Ia95e564a8a43400b2745d9de8217b9cc84cd1b16
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/431920
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Our blobfs allocates fixed number of reqs on three different channels
(the default size is 512), if the req cannot be allocated, our blobfs
related function will do nothing.
With this debug info added, we can easily know the issues.
If the fixed number of requests are not enough, we need to change the
design, using malloc/free together with the fixed number of requests.
During high presure test, I think that if the reqs are not allocated,
it will cause the sync, flush related issues.
Change-Id: Ied8cd5197c4f87b861bd7dc09edd5a095fdcc802
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448596
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is just a cleanup. There's no need to hotplug
or hotremove SCSI targets from stopped sessions, because
those sessions can't access any targets anyway. When
session is started, it already inherits all SCSI targets
from the vhost device. When it's stopped, it releases
resources of all targets. Intermediate changes have
no effect whatsoever, so don't do them.
Change-Id: Ibf283bcf8260e71dec8d9ea39a9461a978031ab3
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449392
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It is theoretically possible for an asynchronous
hotremove request to be finished before the hotplug
request that was started first. This is obviously
not expected and will most likely result in a resource
leak.
For SCSI target hotplug, we immediately update the
whole vhost device object and then asynchronously
ask each vhost session to poll the changes.
For hotremove, we see the device attached in the
whole vhost device object, so we immediately mark
it as "still being removed" and proceed aynchronously
asking the sessions to hotremove. When session
receives the hotremove event first, it will either
fail an assertion (when debug is on), or do nothing.
The subsequent hotplug event will attach the target
again - and that target won't be ever freed.
Change-Id: I784c979fb47127a4238038ad9fb5ed1cac3ced04
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449391
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For session context we need only a few fields from
spdk_scsi_dev_vhost_state structure, so introduce
its stripped variant as a separate structure.
Change-Id: I1be4e77447443d156f86033450892cb7cb464cb9
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447072
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In cases where initiator closes the connection as soon
as it receives a hotremove event, there is a possibility
of SPDK vhost stopping the session before finishing up
the asynchronous target hotremoval. The target would be
either hotremoved once the session is started again
(and it registers its management poller again) or it
could cause a potential memory leak if that session is
destroyed. Even though the SCSI target itself is always
freed, the hotremoval completion callback is only called
from the management poller. At least in our RPC case,
not calling that callback results in leaking the context
structure and some json data.
We fix the above by calling all hotremove callbacks just
before stopping the device.
Change-Id: Ibfd773e1ab82b63643c57d7a9d37304e3007e38b
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/439445
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Changing i to iovcnt in all references to the req->iov structure will be
important when we start processing multi-sgl requests.
Change-Id: I90a9b6d872b94f846ae7d29a45dd2703eafa6175
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449201
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will be used by the multi-sgl version of this function as well.
Change-Id: Iafeba4836a77482fa2a158f86f1c17fe7fdeb510
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449104
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Defer the initialization when cache bdev mentioned in the config doesn't
exist when the FTL bdev is being created.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I084502ae38c9ae5e385e5566550ec3cb8b6f9d2e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448630
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added means to configure libftl to use (optionally) another bdev as
persistent write buffer cache.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I97028a681be168d9386eac8a226631ff772f803b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448629
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is just a placeholder. The real implementation comes later.
Change-Id: I657b240977ba09fd6f24e9e36e97e293e73b5801
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449471
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Was partially present but not complete. Fits here in the series as
it requires read/write operations.
Change-Id: I552896c934bf60256625a83951a95d58d2719646
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447358
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reason: We need to detect this issue. Otherwise, it will
cause null pointer issue later
Change-Id: I4d9aec0570e0b46274ebf3b9642b4727049a4a3b
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448594
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Let's point users to use --enable-debug now instead of
CONFIG_DEBUG=y. Also to be completely pedantic, use
"configure" instead of "build" to make it more clear
this flag needs to be passed to the configure script,
not make.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4a6f6313a4f8e87cbb1d79cb68645305abb0e106
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449339
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Stupid bug - a chunk is compressed when the number
of io_units for the compressed data does *not* equal
the number of io_units per chunk.
Paul found this during some of his initial DPDK
framework integration testing. I have some better
unit tests coming up to test this further, but want
to get this obvious fix in for now.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaf9c78a1c1d6045070e7625c6a54ab3d227c8ea7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449498
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
It's mostly needed for the next patch, but even
now it provides some value by printing errors if
there any leaked (still attached) PCI devices
at shutdown.
Change-Id: I8459a6049b3c6612d9f1d99444bf3acfd474a839
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449082
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added internal retry IO queue. In case ENOMEM from
nvme layer request is put to retry queue. When some
inflight operations are completed try to make progress
on IOs in retry queue in first place.
Change-Id: Ie9d3d20bd34431ee57f9454f242b0cdca349c804
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448461
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There is currently a small window after we stop
session's pollers and before we mark the session
as stopped (by setting vsession->lcore to -1). If
spdk_vhost_dev_foreach_session() is called within
this window, its callback could assume the session
is still running and for example in vhost scsi
target hotremove case, could destroy an io_channel
for the second time - as it'd first done when the
session was stopped. That's a bug.
A similar case exists for session start.
We fix the above by setting vsession->lcore directly
after starting or stopping the session, hence
eliminating the possible window for data races.
This has a few implications:
* spdk_vhost_session_send_event() called before
session start can't operate on vsession->lcore,
so it needs to be provided with the lcore as
an additional parameter now.
* the vsession->lcore can't be accessed until
spdk_vhost_session_start_done() is called, so
its existing usages were replaced with
spdk_env_get_current_core()
* active_session_num is decremented right after
spdk_vhost_session_stop_done() is called and
before spdk_vhost_session_send_event() returns,
so some active_session_num == 1 checks meaning
"the last session gets stopped now" needed to be
changed to check against == 0, as if "the last
session has been just stopped"
Change-Id: I5781bb0ce247425130c9672e0df27d06b6234317
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448229
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Split spdk_vhost_session_event_done() into two separate
functions. This is just a preparation for the next patch.
Change-Id: I05e046e4b963387f058d2b822d7493c761eebbbb
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448228
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
In the next patch we will put much more responsibility
on spdk_vhost_session_event_done(), so here we make
sure it's always called under the global vhost mutex.
Specifically, spdk_vhost_session_event_done() will set
vsession->lcore, which any other thread might try to
concurrently access via spdk_vhost_dev_foreach_session().
Change-Id: I7a5fde4be4e8bdfdbbb24ac955af964f516bdb68
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448227
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We'll make use of it inside the vhost device backend
code. The function itself is generic enough to be put
in the public vhost.h header rather than vhost_internal.h.
Change-Id: I60602c61d8bba665dcf9c6d27af2e910c208a7be
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448226
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Assert(raid_bdev->base_bdev_info) at here is unnecessary.
So remove it.
Change-Id: I7d87fbc95d8c1434ab346fd11179433547b74798
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449379
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: Iacf9f6536ba5baca7b245e639d0d42a89720ba58
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448173
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When a chunk cannot be compressed enough to save one I/O
unit, we will just write the uncompressed data to disk. In
this case, we want the helper routine to use the decomp_buf
instead of the comp_buf.
To facilitate that, save some information in the request
object on the number of io_units to be read from or written
to disk, and whether the data is compressed or not. We
could easily deduce if the data is compressed based on the
number of io_units but saving it in the structure will
save a few instructions and simplify the code a bit.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1537130577943e19fe4dfcee58eac453eca3c29b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449259
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The unit tests don't really try to compress anything
yet, but this at least gets the pipeline in place.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic413850b30e4d9631f3ece2bab40d9026225e5b2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449097
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There are a sequence of operations needed for both
read and write I/O. For example, on a write I/O,
we may need to do a read, modify the chunk, then
write the data back to disk.
For read I/O, the name of the callback is
_read_read_done - the first "read" indicates the
I/O type, the second "read" indicates the disk read
part of the sequence.
The write I/O steps aren't using this same naming
convention, so change that here. This will be
important in upcoming patches where we'll be adding
compress/decompress steps into the I/O pipeline -
having a consistent naming strategy will make the code
easier to follow.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icd525874918378118d807acdbe5dd42d5be03126
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449258
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This preps for some future changes.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I380258938e2412062b43c3d460a7322c5afdf819
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449096
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
We will actually use these in future patches.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I730ef90da6d93922dd17a5ac16594e66132a5f11
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449086
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Logically we should complete any I/O in the completion queue and
abort the rest of the I/O after we delete the submission queue
and completion queue, so that we would not lost any complete I/O.
We alse should complete I/O and abort I/O before destroy I/O qpair
even though the ctrlr/device has been removed.
Change-Id: Ieb28ad7b4a3a7be553f70178b29ca870b5413191
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449316
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
As the bdev_io maybe NULL, so put the assignment after assert(bdev_io != NULL).
Change-Id: I58d6fcf97931b2f431ad5680b87b098e0c9a5e9b
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449296
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Just the starting point, base functions and structs.
Change-Id: I2ff2b672aa675a19b89e4449f1cc4aa664007f6f
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/435747
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We will need separate temporary buffers for compress/decompress.
A single temporary buffer won't do because a user's read/write
operations may not cover a full chunk - so we'll need one buffer
to read/write the compressed data, and another buffer for
the uncompressed data.
So for now, just prepend rw to the existing fields - this
will signify these fields are used for the read/write operations
to the backing storage device. We'll add additional ones in future
patches for the buffers that will hold the uncompressed data.
Note: the vol->buf_mem and ->buf_iov_mem are not prepending "rw"
because they will be used for the compress/decompress temporary
buffers as well. We'll just double the size of these buffers
when allocating them for the volume.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7df56ab72769f4689f3abac3354446e9cf78d423
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449085
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This matches better with the existing buf_iov_mem.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3b85708672553c281666becc8eaf9f9028da8782
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449084
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Upcoming patches will try to compress the data before
writing it to backing I/O units, and we'll need to save
the exact number of compressed bytes.
For now, since we're not actually compressing data yet,
just save the uncompressed data size to this field. There
will be cases when we cannot realize any compression
savings and will just store the uncompressed data, so
handling this now is one less path we'll need to add later.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I499a89590349e4816fe0fef77cc1bfabde6871bf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449078
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Previously we were just passing around uint64_t pointers,
since the chunk map was literally only an array of uint64_t.
But we need to store the compressed data size in the chunk
as well. Before adding the compressed data size, let's do
the prep work here to just create the chunk map structure
which for now only includes an array of uint64_t.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icbfa6e509463d4f560444d3db8acd9e87917835f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449076
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Process 32 OCF requests during poller invocation.
This will result in more flat events distribution.
This patch uses new API function: ocf_queue_run_single().
Change-Id: I0bc2ef783018fdbcf6f6e938fd7ca136ade61599
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446635
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Extend existing get_ocf_bdevs call to make it easier
to get information about attached cores.
Implementation is based adding additional optional argument "name"
to existing call. Based on "name" bdevs are filtered.
Backward compatability of RPC interface is preserved.
This patch also adds tests for the case when name is given.
Change-Id: I4300ebe37e936bc5cca8e066b5f09db462a87cf7
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/444841
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: I0da485ec68329ee9f819cf6dfdb8744c5993e6f2
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448171
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
OCF requires memory retrived from mempool to be filled with zeros.
When mempool is created, information about element size is stored to be used
when new memory is retrived.
This is fix for issue #671
Signed-off-by: Michal Mielewczyk <michal.mielewczyk@intel.com>
Change-Id: Ieb533e3bdae0665dae18e7b3a379da0ed843c35a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449155
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Check if the UUID in the configuration is null (all zeroes) and treat it
as if no UUID has been supplied.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ic91c77591528a8aaa4cf5c0241e6bde51b3757f1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448628
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Some customized SPDK application needs DPDK to run legacy memory mode,
but it is unusual. So this patch uses env_context, the opaque option
variable in the struct spdk_env_opts, and if the application sets
"--legacy-mem" to it, spdk_env_opts_init() skips adding
"--match-allocations" for DPDK 19.02 or later and skips adding
"--legacy-mem" for DPDK 18.05 or before.
Change-Id: I6f40c726c66c29f0aabfeeaecd00611954dc774f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448263
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Similar to recently added nvme_pcie_qpair_ring_sq_doorbell.
Prepares for using this code for coalescing cq doorbell
writes in the future.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I565e103acf73b3d305e72a4440e1cc678c95faa0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448871
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The filter function can be used for IO commands, because all
the Admin commands related with reservations are not supported
in SPDK for now.
Change-Id: I44f0bf0017bafaee87d5f8ac03b0fd368f44c810
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436941
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This event is generated by NICs utilizing the SRQ feature when the last
RECV for that qpair is processed. I have confirmed this feature.
Change-Id: Ib6d6b6d02987f789b4d5dd3daf734e3351ee1974
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448063
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
NVMe controller can be attached via asynchronous API now,
we added the RPC 'construct_nvme_bdev' with asynchronous
probe support so that the initialization can be processed
later.
Change-Id: Ic60fdde6af9c4ba9a07b874852cfba044acb06c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: Ic60fdde6af9c4ba9a07b874852cfba044acb06c8
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445054
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Write operations are not in-place, meaning that once it
is completed, it's chunk and backing io units are freed.
Reads in progress to these backing io units, from other
I/O to the same chunk, could cause data corruption.
Simultaneous writes to the same chunk can cause similar
issues.
There are cases where we can relax this in the future -
for example, overlapped reads to the same chunk poses
no problems. We'll leave that as a future exercise.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3a4d9e8e3ab920f823084cd1bae91f179a4386ff
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448333
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The caller function needs to judge whether the buf is
allocated. Putting assert here is easy for debugging,
but not be friendly for real use.
Change-Id: I3c8e66bc95cbd2f9bc87f26335f249c32e339da4
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448697
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Upcoming changes will require queuing an I/O if it overlaps
with another I/O to the same logical chunk. So split out
code (especially from the writev path) into separate functions,
so that we can execute an spdk_reduce_vol_request object
whether it's just been created via readv/writev, or after
another I/O to the same chunk has been completed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2a216c92e4999313ecc9f7cf157dccd65c9bb30f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448332
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
This will help optimize some upcoming patches which
guard against overlapped I/O to the same chunk in the logical
map.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia1370fffd3bf3d55dc9ce88a993ed157ecee272a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448331
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Change-Id: I026902096686da37c0ca7086bb5d91b35d90ffa6
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447340
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-by: Claire Jihyun In <claire.in@circuitblvd.com>
120 seconds is too long for controllers which can't be
setup during initialization, because this value is only
used for Admin commands so also rename as it is.
Change-Id: I0a3d3192252c0f6fc0bef4d8b868eaef2ae40fe3
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448601
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The identify data is only valid if spdk_nvme_connect()
was used with Discovery Controller, so move this code
into the section where it belongs to.
Change-Id: I1897f38277eafc192552a09556a568e9152bb72d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448500
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
With ASAN to run this cases, it will report issue about heap used after free
in spdk_nvmf_rdma_qpair_destroy. Resources have been released before,
change the order to in this tailq to release resources.
ERROR: AddressSanitizer: heap-use-after-free on address
0x6080000080e0 at pc 0x0000006e1e3f bp 0x7fd48b6c3df0 sp 0x7fd48b6c3de0
READ of size 8 at 0x6080000080e0 thread T3 (reactor_1)
0x6e1e3e in spdk_nvmf_rdma_qpair_destroy spdk/lib/nvmf/rdma.c:813
Change-Id: Ia1c12bca84955a2de60399e6b265c9b8901bb51e
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448534
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now data structure spdk_nvmf_subsystem_pg_ns_info holds all the
reservation information from the associate namespace, so for the
IO processing routine we don't need to send a message to the
subsystem's thread to check the IO command is permited or not.
Change-Id: Ib6be6abf7bf5f24c230dff80c163a1eb963e20d0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448256
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Each subsystem's poll group will have a copy of namespace's
reservation information, for those NVMe commands which may
change the reservation state, the commnad itself should be
returned after updating each subsystem poll group's
reservation state. Then it's safe to check the reservation
state in each poll group's thread.
Change-Id: I64a5baedee9024bcac3957b29eb0330a20f21684
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446213
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This leak could be detected by ASAN in FTL CI tests.
Change-Id: I3ab7317dd5288b9fc808fb476627213b00860eb8
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448566
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This flag is needed to enssure that we can access all of the elements in
the ring. Otherwise we end up being able to access n-1 elements.
Change-Id: I7a9216e69c0599c662e96ddbf6ee79383b6d20dd
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448489
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Intermittent FTL test failure (ASAN) #717 reported an error, in
ftl_halt_poller() call, ftl_anm_unregister_device() will release
controller first, while in ftl_dev_free_sync() the IO queue pair
will be released again.
Change-Id: Ifac2aa68e66ee5f41eba80c11c61d9dc91ec3408
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448524
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The value is already initialized via caller.
Change-Id: I3426a9f34cc545337b6bd3d729ca65e31a8e962e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448523
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The function now has to be called before application
exit. At the moment it only frees the dynamically
allocated DPDK command line option strings - something
that was previously done from an atexit() callback -
but there's more to free there.
Note: the function descriptions were partially copied
from equivalent DPDK functions.
Change-Id: I5f4a6607fdfadff9325917259f58fcbc2cedba1a
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447676
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
DPDK 17.11 is the oldest version still supported by DPDK,
so drop support for DPDKs older than that in SPDK. This
lets us remove a huge amount of ifdefs.
Change-Id: I500987648e388cd5418a25845b6cccf4b55a4e5b
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447674
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently if module claims a bdev in examine_config,
it cannot start asynchronously. This patch changes this
behaviour by calling examine_disk on modules which previously
claimed bdev trough examine_config.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I85b603590c6dab50e59ef7e68f292cb9abc47d98
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448132
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_dma_malloc() is not required here, as the bdev
struct is neither DMA-able nor shared between processes.
While here, also allocate g_null_read_buf using
spdk_zmalloc() instead of spdk_dma_zmalloc(),
as spdk_dma_*malloc() is about to be deprecated.
Change-Id: I0dc344bc84932607c2e22a124e2093e87714ec5e
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448170
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Historically, all memory returned from spdk_*malloc()
used to be physically contiguous, hence it could be
addressed by offsetting just a single physical address.
Since DPDK dynamic memory management came along, the
above is no longer true. Memory returned from spdk_*malloc()
doesn't have to be physically contiguous anymore. The
phys_addr returned from spdk_*malloc() only applies to
the beginning of the allocated buffer and user can't
possibly know how big that "beginning" is.
The phys_addr parameter in spdk_*malloc() is useless on
its own in most cases and only suggests that the returned
buffer is physically contiguous, which is wrong.
This information can be returned from spdk_vtophys(),
which is the only safe way to retrieve physical addresses.
That's why phys_addr param in spdk_*malloc() is now
deprecated.
Change-Id: I934292f7db28b869b05caca4cb5c68c436e228d4
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448168
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The phys_addr param in spdk_*malloc() is about to be
deprecated, so use a separate spdk_vtophys() call to
retrieve physical addresses.
This patch also adds error checks against SPDK_VTOPHYS_ERROR.
The error handling paths are already there to account for
spdk_*malloc() failures themselves, so reuse them in case
of vtophys failures.
Change-Id: Ic1d9194a9a2052a46fc6f7990f53aa91b4a8bbc3
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/416994
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The phys_addr param in spdk_*malloc() is about to be
deprecated, so use a separate spdk_vtophys() call to
retrieve physical addresses.
This patch also adds error checks against SPDK_VTOPHYS_ERROR.
The error handling paths are already there to account for
spdk_*malloc() failures themselves, so reuse them in case
of vtophys failures.
Change-Id: I6d71a4c361f5ec1770d96676f3bb8f57ecd62716
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448167
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The phys_addr param in spdk_*malloc() is about to be
deprecated, so use a separate spdk_vtophys() call to
retrieve physical addresses.
This patch also adds error checks against SPDK_VTOPHYS_ERROR.
The error handling paths are already there to account for
spdk_*malloc() failures themselves, so reuse them in case
of vtophys failures.
Change-Id: I377636e66b8c570d013c1bb2021f04bce4e6c0ce
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/416998
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Not doing so can cause us to hit asserts during the shutdown path. This
should fix an intermittent failure we are seeing on the test pool where
we hit the assert rdma_req->state != RDMA_REQUEST_STATE_FREE in
spdk_nvmf_rdma_request_process.
Note that this problem doesn't cause any data corruption when debug is
not enabled, it just causes us to probcess a subset of commands through
the state machine one extra time suring qpair shutdown.
Change-Id: Ibc36bfea87ec4089b8e2c7a915f48714fddb0b09
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447843
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
First of all, this struct was used when stopping
a session and wasn't directly related to any vhost
device despite its name.
Second, the struct contained just a single poller.
Instead of renaming it, we remove it. We can use
that poller pointer directly.
Change-Id: I66ad0826f7e809365c07662e59979b1942243c2e
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448225
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
* don't iterate through g_nvme_ctrlrs when it's unnecessary
* fixup a potential deadlock on session stop error
(which can't practically happen unless the SPDK generic
vhost layer is malfunctioning)
* add a FIXME note to wait for pending I/Os before putting
bdev io channels and stopping the vhost pollers.
Change-Id: I576c4771f51e432fbbab244fd1b91668436004bf
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448224
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The context had to be previously carried around by
particular vhost backend code and now it's embedded
inside the generic vsession struct. This serves mostly
as a cleanup.
Change-Id: I7b6ac2c3cb5d60a035d56affbf42fe5d4697f0f6
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448223
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Nothing needed this to be asynchronous.
Change-Id: Ic67167d5c1214e832b77ab7fa44aa693026d868a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447115
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Nothing actually needs this to be asynchronous. If something
comes up, we can make it asynchronous again.
Change-Id: Icde3af3f8f9efebe75b08471b4afcce3a70da541
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447114
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Events are the mechanism by which threads are scheduled,
so events need to be processed even if there are no
threads.
Change-Id: I2e908e6a948709f2122b1c7385b6fd771827b9aa
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447111
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This callback type takes 1 argument instead of 2.
Change-Id: Ic3710fafb2828f08fc064f7658849b3d20521092
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446997
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Try to group data members that are used often into the
same cache lines. We still need to find more space in the second
cache line of spdk_nvme_pcie_qpair so that the important
parts of spdk_nvme_qpair fit.
Change-Id: Ib936cb2b1acc722de7ec313d6faa3812aacde394
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447968
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Don't touch the shadow doorbells if it isn't necessary.
The flag could be combined into a bit mask with other
flags in a future patch.
Change-Id: I9ffd16468d29f0f0868cf849f7fece327eb6a294
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447967
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For NVMe devices, in conjunction with the new batching options,
it can be advantageous to artificially delay between polling
for completions. Add an option to slow this rate down.
Change-Id: I0fc92709ff45ead0beb388dda60694bf1ed8b258
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447716
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The bdev is polling for completions continually, so it
is safe to turn this on.
Change-Id: I8ac1c46c1f683463281c4bd8b0a0781f70a72297
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447713
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Avoid ringing the submission queue doorbell until the
call to spdk_nvme_qpair_process_completions().
Change-Id: I7b3cd952e5ec79109eaa1c3a50f6537d7aaea51a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447239
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is going to get called from two places shortly.
Change-Id: I2c67e719c91887987e6e65c5c0c384bed0431409
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448311
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This was broken in commit 2725b5191e [1], which added
an extra #ifdef SPDK_CONFIG_VHOST_INTERNAL_LIB without
including config.h anywhere within the same file.
Currently the virtio library always behaves as if it was
compiled with upstream rte_vhost. Fix this by including
spdk/config.h where necessary.
[1] virtio/user: don't send SET_VRING_ADDR after updating
the memory table
Change-Id: Idadc53e20d615ca1dcef5b58a854f6b39d14511b
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448222
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is the first step which adds the callback for construct
NVMe controller RPC, the next patch will add the asynchronous
probe support.
Change-Id: Ib681d78b544c62f6f1ef66e298cd91f71c34cbc7
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447030
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When users call the RPC to add a NVMe controller, block NVMe driver
will create controller and block devices based on Namespaces, so
wrapper the two actions together with a intermediate function,
this will make the code looks more clean for the coming patch.
Change-Id: Iddc072042eb2df90662c42e04427307ccf5d5633
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445658
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will become important later on.
Change-Id: I94e5af03359e476afbc68664e43f44269ad5974c
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448074
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When we have a shared receive queue, the number of outstanding items
associated with a completion queue is deterministic, and limited by how
many RECVs we have total in the SRQ. So, we can set the total size of
the Completion queue at the beginning of time and never resize it.
Change-Id: I787e4c5bbd52ac8948a323d1301f926f887cd91c
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447492
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Consolidating error paths is common practice in SPDK so do that here to
make the function more uniform and save space.
Change-Id: I98c5d5f7feeb688f1d8b24f4d2d3461a43d00c1d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448191
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Discovered in bdev compression test. Vol load was using the index
of the logical map to set the allocated chunk map bits as well as
retrieve the chunk. Exposed with overwrite situations. Also clarrified
one var name that I missed in previous patch.
Also added UT that fails without the fix, passes with the fix.
Change-Id: I776a5af9364cc3d4e8b7dafec22acf23bd463630
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447969
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Changed a few cases where var name chunk was used where a better
name would be logical_map_index to avoid confusion with 'chunk'
used as a data pointer.
Change-Id: Ib82a783725cad4609c31bfa8997debb3e71e75b9
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447962
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This practically reverts commit 2fe7aa5e4 [1].
The extra rte_bus was supposed to allow running SPDK
as a non-priviledged user by enabling RTE_IOVA_VA mode.
DPDK uses RTE_IOVA_PA by default - which means there are
physical addresses used as memseg IOVAs and hence the
root access is required to retrieve those physical
addresses. This patch was supposed to be paired with
a different DPDK patch of mine, but DPDK rejected that
one. Instead, in DPDK 18.11+ the user can force iova mode
by specifying --iova-mode=<mode> command line option,
where <mode> is either pa or va.
Either way, apparently there are cases where physical
address contiguity is required even without UIO (#707)
so let's revert this patch and consistently stick with
RTE_IOVA_PA.
SPDK requires some more effort to support running as
a non-priviledged user anyway.
Fixes#707
[1] env_dpdk/vtophys: register a fake rte_bus supporting RTE_IOVA_VA
Change-Id: I90bf097fd6a7f129444229dc7cf07a462d4f2d09
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448121
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
