Enable parsing an nvmf request that contains an inline
nvme_sgl_last_segment_descriptor element. This is the next step
towards NVMe-oF SGL support in the NVMe-oF target.
Change-Id: Ia2f1f7054e0de8a9e2bfe4dabe6af4085e3f12c4
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/428745
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This also means that the RocksDB threads don't need
to be SPDK threads any more.
Change-Id: Icadd6dd446958ebf470ad8ab8239f5390942eb87
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449465
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In the next step, this won't be a channel at all.
Change-Id: Ia8fe4da5b0b283e8dfc5c6477b84cfdd346d89a0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449464
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When we decompress, pass the size of the compressed
data - not the size of the buffer itself.
We also need to remove an assert that's no longer
true since we can now handle compressed chunks.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifb7896db12ccbefdd49815b5037af11ddd82e625
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449513
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Most typically, the error will be -ENOSPC, meaning the
destination buffer wasn't big enough to hold the compressed
data. But even for other types of errors, just write the
uncompressed data rather than treating it as an I/O
failure.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id6526cab95488a1a587b183237f9980c83287761
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449511
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Test functions to be added later in series
Change-Id: I96286b6214b4577df334d180e7c3d641e8ce8f68
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445371
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
My iSCSI target reported segment fault after memory allocation
failure, and add the addtional check here can fix the issue.
Change-Id: Iee3e497d7028fbface6d110c78e73965ef0f178b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449717
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
lvol should not only be freed but also removed
from lvols list when deletion fails.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I3a047e1cc611e71b1544ca77c256a879dd2efdae
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446619
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It's not standard to put a newline here - let's use a null
character instead.
Found while using nvme-cli - when creating a subsystem with
default serial number, the right justified callout text had
an extra newline in it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8a81dafb4f6c30f7bf2dcebfa7a5b19cfe3ab5fc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449645
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Fixes#726.
This prevents a segmentation fault by checking the pointer
before accessing it.
Change-Id: I18a3776fbcd6242c6efd1b88044debaa88c7342f
Signed-off-by: Claire J. In <claire.in@circuitblvd.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449591
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Misc cleanup from earlier patches, some naming issues and other
minor things that are needed before adding UT.
Change-Id: Ic76f0e2fd12e48782b048fb8785902b1098cf352
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436227
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is starting point for metadata refactor
which is needed for efficient ANM events support.
Change-Id: I81d864605e69008d8e3922fb61adf504187447a1
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449328
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: Ib9fb94463a69ffd9660ab2c7fbe02826a7e06741
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449796
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When bdev is registered it will send "bdev_register" notification and
"bdev_unregister" when unregister is complete.
Change-Id: I3b37a4cb766a473f3da63a571036add366e78fa5
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448839
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A few private functions had still the prefix spdk_ in their names.
This patch completes the effort to remove the prefix spdk_ from
private functions in iSCSI library.
Change-Id: Ic1a1e85220edb72296ca4881bdf7b550c4f6b6b8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449716
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fixes#722. The state was set in nvme_ctrlr_identify_id_desc_async
Signed-off-by: cranechu <cranechu@gmail.com>
Change-Id: I232f0035e8c45d49eca2de7174c91860a299d804
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449527
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Replaced tpoint_ids generated based on the properties of the IO with a
static list of tpoint_ids, to fit inside the per-group maximum tpoint
limit (64).
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ifb8b8637a1e6d8f0e7fd3f4363b97fdbedcdb8d5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448067
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
When you connect a iscsi lun as a bdev, and the lun id is not 0,
all IOs will fail.
We should use the correct lun id in libiscsi.
Reproduces like this:
./scripts/rpc.py construct_iscsi_bdev -b iSCSI0 -i
iqn.2016-06.io.spdk:init --url
iscsi://127.0.0.1:3261/iqn.2016-02.com.smartx:system:fl-iscsi/1
Signed-off-by: Li Feng <fengli@smartx.com>
Change-Id: I2480e866fdda17426362aca3cb30b7e90c927547
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449318
Reviewed-by: Kyle Zhang <kyle@smartx.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
iSCSI library had used the prefix spdk_ for most functions regardless
of private or public. Using the prefix spdk_ only for public functions
will be helpful to distinguish private and public functions, and
will be helpful to investigate issues or do further improvement.
Besides in iscsi.c static variable spdk_arc4random_initialized had
the prefix spdk_, and change it to g_arc4random_initialized according
to the SPDK's good practice.
iSCSI library still have some issues but is more stable than before
and now will be the good time to adjust the naming rule to other
libraries.
This patch doesn't change any behavior.
Change-Id: Ia0b8585a7ce6662cabc0e6f57b7ccb8a40342297
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449396
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
These function declarations are not used.
Change-Id: If525f4157e3fa9e5d718e6c7aa77db8584edd14c
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449395
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds library that will provide ability to notify about
events. On one side each spdk library can specify what kind of
notification it can produce and on the other side libraries can fetch
those notifications.
Example is bdev module, which lib notify about added or removed bdev.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Change-Id: Ia95e564a8a43400b2745d9de8217b9cc84cd1b16
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/431920
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Our blobfs allocates fixed number of reqs on three different channels
(the default size is 512), if the req cannot be allocated, our blobfs
related function will do nothing.
With this debug info added, we can easily know the issues.
If the fixed number of requests are not enough, we need to change the
design, using malloc/free together with the fixed number of requests.
During high presure test, I think that if the reqs are not allocated,
it will cause the sync, flush related issues.
Change-Id: Ied8cd5197c4f87b861bd7dc09edd5a095fdcc802
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448596
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is just a cleanup. There's no need to hotplug
or hotremove SCSI targets from stopped sessions, because
those sessions can't access any targets anyway. When
session is started, it already inherits all SCSI targets
from the vhost device. When it's stopped, it releases
resources of all targets. Intermediate changes have
no effect whatsoever, so don't do them.
Change-Id: Ibf283bcf8260e71dec8d9ea39a9461a978031ab3
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449392
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It is theoretically possible for an asynchronous
hotremove request to be finished before the hotplug
request that was started first. This is obviously
not expected and will most likely result in a resource
leak.
For SCSI target hotplug, we immediately update the
whole vhost device object and then asynchronously
ask each vhost session to poll the changes.
For hotremove, we see the device attached in the
whole vhost device object, so we immediately mark
it as "still being removed" and proceed aynchronously
asking the sessions to hotremove. When session
receives the hotremove event first, it will either
fail an assertion (when debug is on), or do nothing.
The subsequent hotplug event will attach the target
again - and that target won't be ever freed.
Change-Id: I784c979fb47127a4238038ad9fb5ed1cac3ced04
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449391
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For session context we need only a few fields from
spdk_scsi_dev_vhost_state structure, so introduce
its stripped variant as a separate structure.
Change-Id: I1be4e77447443d156f86033450892cb7cb464cb9
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447072
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In cases where initiator closes the connection as soon
as it receives a hotremove event, there is a possibility
of SPDK vhost stopping the session before finishing up
the asynchronous target hotremoval. The target would be
either hotremoved once the session is started again
(and it registers its management poller again) or it
could cause a potential memory leak if that session is
destroyed. Even though the SCSI target itself is always
freed, the hotremoval completion callback is only called
from the management poller. At least in our RPC case,
not calling that callback results in leaking the context
structure and some json data.
We fix the above by calling all hotremove callbacks just
before stopping the device.
Change-Id: Ibfd773e1ab82b63643c57d7a9d37304e3007e38b
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/439445
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Changing i to iovcnt in all references to the req->iov structure will be
important when we start processing multi-sgl requests.
Change-Id: I90a9b6d872b94f846ae7d29a45dd2703eafa6175
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449201
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will be used by the multi-sgl version of this function as well.
Change-Id: Iafeba4836a77482fa2a158f86f1c17fe7fdeb510
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449104
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Defer the initialization when cache bdev mentioned in the config doesn't
exist when the FTL bdev is being created.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I084502ae38c9ae5e385e5566550ec3cb8b6f9d2e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448630
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added means to configure libftl to use (optionally) another bdev as
persistent write buffer cache.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I97028a681be168d9386eac8a226631ff772f803b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448629
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is just a placeholder. The real implementation comes later.
Change-Id: I657b240977ba09fd6f24e9e36e97e293e73b5801
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449471
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Was partially present but not complete. Fits here in the series as
it requires read/write operations.
Change-Id: I552896c934bf60256625a83951a95d58d2719646
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447358
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reason: We need to detect this issue. Otherwise, it will
cause null pointer issue later
Change-Id: I4d9aec0570e0b46274ebf3b9642b4727049a4a3b
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448594
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Let's point users to use --enable-debug now instead of
CONFIG_DEBUG=y. Also to be completely pedantic, use
"configure" instead of "build" to make it more clear
this flag needs to be passed to the configure script,
not make.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4a6f6313a4f8e87cbb1d79cb68645305abb0e106
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449339
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Stupid bug - a chunk is compressed when the number
of io_units for the compressed data does *not* equal
the number of io_units per chunk.
Paul found this during some of his initial DPDK
framework integration testing. I have some better
unit tests coming up to test this further, but want
to get this obvious fix in for now.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaf9c78a1c1d6045070e7625c6a54ab3d227c8ea7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449498
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
It's mostly needed for the next patch, but even
now it provides some value by printing errors if
there any leaked (still attached) PCI devices
at shutdown.
Change-Id: I8459a6049b3c6612d9f1d99444bf3acfd474a839
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449082
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added internal retry IO queue. In case ENOMEM from
nvme layer request is put to retry queue. When some
inflight operations are completed try to make progress
on IOs in retry queue in first place.
Change-Id: Ie9d3d20bd34431ee57f9454f242b0cdca349c804
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448461
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There is currently a small window after we stop
session's pollers and before we mark the session
as stopped (by setting vsession->lcore to -1). If
spdk_vhost_dev_foreach_session() is called within
this window, its callback could assume the session
is still running and for example in vhost scsi
target hotremove case, could destroy an io_channel
for the second time - as it'd first done when the
session was stopped. That's a bug.
A similar case exists for session start.
We fix the above by setting vsession->lcore directly
after starting or stopping the session, hence
eliminating the possible window for data races.
This has a few implications:
* spdk_vhost_session_send_event() called before
session start can't operate on vsession->lcore,
so it needs to be provided with the lcore as
an additional parameter now.
* the vsession->lcore can't be accessed until
spdk_vhost_session_start_done() is called, so
its existing usages were replaced with
spdk_env_get_current_core()
* active_session_num is decremented right after
spdk_vhost_session_stop_done() is called and
before spdk_vhost_session_send_event() returns,
so some active_session_num == 1 checks meaning
"the last session gets stopped now" needed to be
changed to check against == 0, as if "the last
session has been just stopped"
Change-Id: I5781bb0ce247425130c9672e0df27d06b6234317
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448229
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Split spdk_vhost_session_event_done() into two separate
functions. This is just a preparation for the next patch.
Change-Id: I05e046e4b963387f058d2b822d7493c761eebbbb
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448228
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
In the next patch we will put much more responsibility
on spdk_vhost_session_event_done(), so here we make
sure it's always called under the global vhost mutex.
Specifically, spdk_vhost_session_event_done() will set
vsession->lcore, which any other thread might try to
concurrently access via spdk_vhost_dev_foreach_session().
Change-Id: I7a5fde4be4e8bdfdbbb24ac955af964f516bdb68
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448227
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We'll make use of it inside the vhost device backend
code. The function itself is generic enough to be put
in the public vhost.h header rather than vhost_internal.h.
Change-Id: I60602c61d8bba665dcf9c6d27af2e910c208a7be
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448226
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Assert(raid_bdev->base_bdev_info) at here is unnecessary.
So remove it.
Change-Id: I7d87fbc95d8c1434ab346fd11179433547b74798
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449379
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: Iacf9f6536ba5baca7b245e639d0d42a89720ba58
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448173
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When a chunk cannot be compressed enough to save one I/O
unit, we will just write the uncompressed data to disk. In
this case, we want the helper routine to use the decomp_buf
instead of the comp_buf.
To facilitate that, save some information in the request
object on the number of io_units to be read from or written
to disk, and whether the data is compressed or not. We
could easily deduce if the data is compressed based on the
number of io_units but saving it in the structure will
save a few instructions and simplify the code a bit.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1537130577943e19fe4dfcee58eac453eca3c29b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449259
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The unit tests don't really try to compress anything
yet, but this at least gets the pipeline in place.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic413850b30e4d9631f3ece2bab40d9026225e5b2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449097
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There are a sequence of operations needed for both
read and write I/O. For example, on a write I/O,
we may need to do a read, modify the chunk, then
write the data back to disk.
For read I/O, the name of the callback is
_read_read_done - the first "read" indicates the
I/O type, the second "read" indicates the disk read
part of the sequence.
The write I/O steps aren't using this same naming
convention, so change that here. This will be
important in upcoming patches where we'll be adding
compress/decompress steps into the I/O pipeline -
having a consistent naming strategy will make the code
easier to follow.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icd525874918378118d807acdbe5dd42d5be03126
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449258
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This preps for some future changes.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I380258938e2412062b43c3d460a7322c5afdf819
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449096
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
We will actually use these in future patches.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I730ef90da6d93922dd17a5ac16594e66132a5f11
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449086
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Logically we should complete any I/O in the completion queue and
abort the rest of the I/O after we delete the submission queue
and completion queue, so that we would not lost any complete I/O.
We alse should complete I/O and abort I/O before destroy I/O qpair
even though the ctrlr/device has been removed.
Change-Id: Ieb28ad7b4a3a7be553f70178b29ca870b5413191
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449316
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
As the bdev_io maybe NULL, so put the assignment after assert(bdev_io != NULL).
Change-Id: I58d6fcf97931b2f431ad5680b87b098e0c9a5e9b
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449296
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Just the starting point, base functions and structs.
Change-Id: I2ff2b672aa675a19b89e4449f1cc4aa664007f6f
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/435747
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We will need separate temporary buffers for compress/decompress.
A single temporary buffer won't do because a user's read/write
operations may not cover a full chunk - so we'll need one buffer
to read/write the compressed data, and another buffer for
the uncompressed data.
So for now, just prepend rw to the existing fields - this
will signify these fields are used for the read/write operations
to the backing storage device. We'll add additional ones in future
patches for the buffers that will hold the uncompressed data.
Note: the vol->buf_mem and ->buf_iov_mem are not prepending "rw"
because they will be used for the compress/decompress temporary
buffers as well. We'll just double the size of these buffers
when allocating them for the volume.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7df56ab72769f4689f3abac3354446e9cf78d423
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449085
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This matches better with the existing buf_iov_mem.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3b85708672553c281666becc8eaf9f9028da8782
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449084
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Upcoming patches will try to compress the data before
writing it to backing I/O units, and we'll need to save
the exact number of compressed bytes.
For now, since we're not actually compressing data yet,
just save the uncompressed data size to this field. There
will be cases when we cannot realize any compression
savings and will just store the uncompressed data, so
handling this now is one less path we'll need to add later.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I499a89590349e4816fe0fef77cc1bfabde6871bf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449078
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Previously we were just passing around uint64_t pointers,
since the chunk map was literally only an array of uint64_t.
But we need to store the compressed data size in the chunk
as well. Before adding the compressed data size, let's do
the prep work here to just create the chunk map structure
which for now only includes an array of uint64_t.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icbfa6e509463d4f560444d3db8acd9e87917835f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449076
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Process 32 OCF requests during poller invocation.
This will result in more flat events distribution.
This patch uses new API function: ocf_queue_run_single().
Change-Id: I0bc2ef783018fdbcf6f6e938fd7ca136ade61599
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446635
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Extend existing get_ocf_bdevs call to make it easier
to get information about attached cores.
Implementation is based adding additional optional argument "name"
to existing call. Based on "name" bdevs are filtered.
Backward compatability of RPC interface is preserved.
This patch also adds tests for the case when name is given.
Change-Id: I4300ebe37e936bc5cca8e066b5f09db462a87cf7
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/444841
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: I0da485ec68329ee9f819cf6dfdb8744c5993e6f2
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448171
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
OCF requires memory retrived from mempool to be filled with zeros.
When mempool is created, information about element size is stored to be used
when new memory is retrived.
This is fix for issue #671
Signed-off-by: Michal Mielewczyk <michal.mielewczyk@intel.com>
Change-Id: Ieb533e3bdae0665dae18e7b3a379da0ed843c35a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449155
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Check if the UUID in the configuration is null (all zeroes) and treat it
as if no UUID has been supplied.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ic91c77591528a8aaa4cf5c0241e6bde51b3757f1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448628
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Some customized SPDK application needs DPDK to run legacy memory mode,
but it is unusual. So this patch uses env_context, the opaque option
variable in the struct spdk_env_opts, and if the application sets
"--legacy-mem" to it, spdk_env_opts_init() skips adding
"--match-allocations" for DPDK 19.02 or later and skips adding
"--legacy-mem" for DPDK 18.05 or before.
Change-Id: I6f40c726c66c29f0aabfeeaecd00611954dc774f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448263
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Similar to recently added nvme_pcie_qpair_ring_sq_doorbell.
Prepares for using this code for coalescing cq doorbell
writes in the future.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I565e103acf73b3d305e72a4440e1cc678c95faa0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448871
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The filter function can be used for IO commands, because all
the Admin commands related with reservations are not supported
in SPDK for now.
Change-Id: I44f0bf0017bafaee87d5f8ac03b0fd368f44c810
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436941
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This event is generated by NICs utilizing the SRQ feature when the last
RECV for that qpair is processed. I have confirmed this feature.
Change-Id: Ib6d6b6d02987f789b4d5dd3daf734e3351ee1974
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448063
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
NVMe controller can be attached via asynchronous API now,
we added the RPC 'construct_nvme_bdev' with asynchronous
probe support so that the initialization can be processed
later.
Change-Id: Ic60fdde6af9c4ba9a07b874852cfba044acb06c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: Ic60fdde6af9c4ba9a07b874852cfba044acb06c8
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445054
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Write operations are not in-place, meaning that once it
is completed, it's chunk and backing io units are freed.
Reads in progress to these backing io units, from other
I/O to the same chunk, could cause data corruption.
Simultaneous writes to the same chunk can cause similar
issues.
There are cases where we can relax this in the future -
for example, overlapped reads to the same chunk poses
no problems. We'll leave that as a future exercise.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3a4d9e8e3ab920f823084cd1bae91f179a4386ff
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448333
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The caller function needs to judge whether the buf is
allocated. Putting assert here is easy for debugging,
but not be friendly for real use.
Change-Id: I3c8e66bc95cbd2f9bc87f26335f249c32e339da4
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448697
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Upcoming changes will require queuing an I/O if it overlaps
with another I/O to the same logical chunk. So split out
code (especially from the writev path) into separate functions,
so that we can execute an spdk_reduce_vol_request object
whether it's just been created via readv/writev, or after
another I/O to the same chunk has been completed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2a216c92e4999313ecc9f7cf157dccd65c9bb30f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448332
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
This will help optimize some upcoming patches which
guard against overlapped I/O to the same chunk in the logical
map.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia1370fffd3bf3d55dc9ce88a993ed157ecee272a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448331
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Change-Id: I026902096686da37c0ca7086bb5d91b35d90ffa6
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447340
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-by: Claire Jihyun In <claire.in@circuitblvd.com>
120 seconds is too long for controllers which can't be
setup during initialization, because this value is only
used for Admin commands so also rename as it is.
Change-Id: I0a3d3192252c0f6fc0bef4d8b868eaef2ae40fe3
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448601
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The identify data is only valid if spdk_nvme_connect()
was used with Discovery Controller, so move this code
into the section where it belongs to.
Change-Id: I1897f38277eafc192552a09556a568e9152bb72d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448500
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
With ASAN to run this cases, it will report issue about heap used after free
in spdk_nvmf_rdma_qpair_destroy. Resources have been released before,
change the order to in this tailq to release resources.
ERROR: AddressSanitizer: heap-use-after-free on address
0x6080000080e0 at pc 0x0000006e1e3f bp 0x7fd48b6c3df0 sp 0x7fd48b6c3de0
READ of size 8 at 0x6080000080e0 thread T3 (reactor_1)
0x6e1e3e in spdk_nvmf_rdma_qpair_destroy spdk/lib/nvmf/rdma.c:813
Change-Id: Ia1c12bca84955a2de60399e6b265c9b8901bb51e
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448534
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now data structure spdk_nvmf_subsystem_pg_ns_info holds all the
reservation information from the associate namespace, so for the
IO processing routine we don't need to send a message to the
subsystem's thread to check the IO command is permited or not.
Change-Id: Ib6be6abf7bf5f24c230dff80c163a1eb963e20d0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448256
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Each subsystem's poll group will have a copy of namespace's
reservation information, for those NVMe commands which may
change the reservation state, the commnad itself should be
returned after updating each subsystem poll group's
reservation state. Then it's safe to check the reservation
state in each poll group's thread.
Change-Id: I64a5baedee9024bcac3957b29eb0330a20f21684
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446213
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This leak could be detected by ASAN in FTL CI tests.
Change-Id: I3ab7317dd5288b9fc808fb476627213b00860eb8
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448566
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This flag is needed to enssure that we can access all of the elements in
the ring. Otherwise we end up being able to access n-1 elements.
Change-Id: I7a9216e69c0599c662e96ddbf6ee79383b6d20dd
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448489
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Intermittent FTL test failure (ASAN) #717 reported an error, in
ftl_halt_poller() call, ftl_anm_unregister_device() will release
controller first, while in ftl_dev_free_sync() the IO queue pair
will be released again.
Change-Id: Ifac2aa68e66ee5f41eba80c11c61d9dc91ec3408
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448524
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The value is already initialized via caller.
Change-Id: I3426a9f34cc545337b6bd3d729ca65e31a8e962e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448523
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The function now has to be called before application
exit. At the moment it only frees the dynamically
allocated DPDK command line option strings - something
that was previously done from an atexit() callback -
but there's more to free there.
Note: the function descriptions were partially copied
from equivalent DPDK functions.
Change-Id: I5f4a6607fdfadff9325917259f58fcbc2cedba1a
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447676
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
DPDK 17.11 is the oldest version still supported by DPDK,
so drop support for DPDKs older than that in SPDK. This
lets us remove a huge amount of ifdefs.
Change-Id: I500987648e388cd5418a25845b6cccf4b55a4e5b
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447674
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently if module claims a bdev in examine_config,
it cannot start asynchronously. This patch changes this
behaviour by calling examine_disk on modules which previously
claimed bdev trough examine_config.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I85b603590c6dab50e59ef7e68f292cb9abc47d98
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448132
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_dma_malloc() is not required here, as the bdev
struct is neither DMA-able nor shared between processes.
While here, also allocate g_null_read_buf using
spdk_zmalloc() instead of spdk_dma_zmalloc(),
as spdk_dma_*malloc() is about to be deprecated.
Change-Id: I0dc344bc84932607c2e22a124e2093e87714ec5e
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448170
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Historically, all memory returned from spdk_*malloc()
used to be physically contiguous, hence it could be
addressed by offsetting just a single physical address.
Since DPDK dynamic memory management came along, the
above is no longer true. Memory returned from spdk_*malloc()
doesn't have to be physically contiguous anymore. The
phys_addr returned from spdk_*malloc() only applies to
the beginning of the allocated buffer and user can't
possibly know how big that "beginning" is.
The phys_addr parameter in spdk_*malloc() is useless on
its own in most cases and only suggests that the returned
buffer is physically contiguous, which is wrong.
This information can be returned from spdk_vtophys(),
which is the only safe way to retrieve physical addresses.
That's why phys_addr param in spdk_*malloc() is now
deprecated.
Change-Id: I934292f7db28b869b05caca4cb5c68c436e228d4
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448168
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The phys_addr param in spdk_*malloc() is about to be
deprecated, so use a separate spdk_vtophys() call to
retrieve physical addresses.
This patch also adds error checks against SPDK_VTOPHYS_ERROR.
The error handling paths are already there to account for
spdk_*malloc() failures themselves, so reuse them in case
of vtophys failures.
Change-Id: Ic1d9194a9a2052a46fc6f7990f53aa91b4a8bbc3
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/416994
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The phys_addr param in spdk_*malloc() is about to be
deprecated, so use a separate spdk_vtophys() call to
retrieve physical addresses.
This patch also adds error checks against SPDK_VTOPHYS_ERROR.
The error handling paths are already there to account for
spdk_*malloc() failures themselves, so reuse them in case
of vtophys failures.
Change-Id: I6d71a4c361f5ec1770d96676f3bb8f57ecd62716
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448167
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The phys_addr param in spdk_*malloc() is about to be
deprecated, so use a separate spdk_vtophys() call to
retrieve physical addresses.
This patch also adds error checks against SPDK_VTOPHYS_ERROR.
The error handling paths are already there to account for
spdk_*malloc() failures themselves, so reuse them in case
of vtophys failures.
Change-Id: I377636e66b8c570d013c1bb2021f04bce4e6c0ce
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/416998
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Not doing so can cause us to hit asserts during the shutdown path. This
should fix an intermittent failure we are seeing on the test pool where
we hit the assert rdma_req->state != RDMA_REQUEST_STATE_FREE in
spdk_nvmf_rdma_request_process.
Note that this problem doesn't cause any data corruption when debug is
not enabled, it just causes us to probcess a subset of commands through
the state machine one extra time suring qpair shutdown.
Change-Id: Ibc36bfea87ec4089b8e2c7a915f48714fddb0b09
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447843
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
First of all, this struct was used when stopping
a session and wasn't directly related to any vhost
device despite its name.
Second, the struct contained just a single poller.
Instead of renaming it, we remove it. We can use
that poller pointer directly.
Change-Id: I66ad0826f7e809365c07662e59979b1942243c2e
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448225
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
* don't iterate through g_nvme_ctrlrs when it's unnecessary
* fixup a potential deadlock on session stop error
(which can't practically happen unless the SPDK generic
vhost layer is malfunctioning)
* add a FIXME note to wait for pending I/Os before putting
bdev io channels and stopping the vhost pollers.
Change-Id: I576c4771f51e432fbbab244fd1b91668436004bf
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448224
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The context had to be previously carried around by
particular vhost backend code and now it's embedded
inside the generic vsession struct. This serves mostly
as a cleanup.
Change-Id: I7b6ac2c3cb5d60a035d56affbf42fe5d4697f0f6
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448223
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Nothing needed this to be asynchronous.
Change-Id: Ic67167d5c1214e832b77ab7fa44aa693026d868a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447115
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Nothing actually needs this to be asynchronous. If something
comes up, we can make it asynchronous again.
Change-Id: Icde3af3f8f9efebe75b08471b4afcce3a70da541
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447114
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Events are the mechanism by which threads are scheduled,
so events need to be processed even if there are no
threads.
Change-Id: I2e908e6a948709f2122b1c7385b6fd771827b9aa
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447111
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This callback type takes 1 argument instead of 2.
Change-Id: Ic3710fafb2828f08fc064f7658849b3d20521092
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446997
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Try to group data members that are used often into the
same cache lines. We still need to find more space in the second
cache line of spdk_nvme_pcie_qpair so that the important
parts of spdk_nvme_qpair fit.
Change-Id: Ib936cb2b1acc722de7ec313d6faa3812aacde394
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447968
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Don't touch the shadow doorbells if it isn't necessary.
The flag could be combined into a bit mask with other
flags in a future patch.
Change-Id: I9ffd16468d29f0f0868cf849f7fece327eb6a294
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447967
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For NVMe devices, in conjunction with the new batching options,
it can be advantageous to artificially delay between polling
for completions. Add an option to slow this rate down.
Change-Id: I0fc92709ff45ead0beb388dda60694bf1ed8b258
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447716
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The bdev is polling for completions continually, so it
is safe to turn this on.
Change-Id: I8ac1c46c1f683463281c4bd8b0a0781f70a72297
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447713
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Avoid ringing the submission queue doorbell until the
call to spdk_nvme_qpair_process_completions().
Change-Id: I7b3cd952e5ec79109eaa1c3a50f6537d7aaea51a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447239
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is going to get called from two places shortly.
Change-Id: I2c67e719c91887987e6e65c5c0c384bed0431409
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448311
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This was broken in commit 2725b5191e [1], which added
an extra #ifdef SPDK_CONFIG_VHOST_INTERNAL_LIB without
including config.h anywhere within the same file.
Currently the virtio library always behaves as if it was
compiled with upstream rte_vhost. Fix this by including
spdk/config.h where necessary.
[1] virtio/user: don't send SET_VRING_ADDR after updating
the memory table
Change-Id: Idadc53e20d615ca1dcef5b58a854f6b39d14511b
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448222
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is the first step which adds the callback for construct
NVMe controller RPC, the next patch will add the asynchronous
probe support.
Change-Id: Ib681d78b544c62f6f1ef66e298cd91f71c34cbc7
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447030
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When users call the RPC to add a NVMe controller, block NVMe driver
will create controller and block devices based on Namespaces, so
wrapper the two actions together with a intermediate function,
this will make the code looks more clean for the coming patch.
Change-Id: Iddc072042eb2df90662c42e04427307ccf5d5633
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445658
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will become important later on.
Change-Id: I94e5af03359e476afbc68664e43f44269ad5974c
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448074
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When we have a shared receive queue, the number of outstanding items
associated with a completion queue is deterministic, and limited by how
many RECVs we have total in the SRQ. So, we can set the total size of
the Completion queue at the beginning of time and never resize it.
Change-Id: I787e4c5bbd52ac8948a323d1301f926f887cd91c
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447492
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Consolidating error paths is common practice in SPDK so do that here to
make the function more uniform and save space.
Change-Id: I98c5d5f7feeb688f1d8b24f4d2d3461a43d00c1d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448191
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Discovered in bdev compression test. Vol load was using the index
of the logical map to set the allocated chunk map bits as well as
retrieve the chunk. Exposed with overwrite situations. Also clarrified
one var name that I missed in previous patch.
Also added UT that fails without the fix, passes with the fix.
Change-Id: I776a5af9364cc3d4e8b7dafec22acf23bd463630
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447969
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Changed a few cases where var name chunk was used where a better
name would be logical_map_index to avoid confusion with 'chunk'
used as a data pointer.
Change-Id: Ib82a783725cad4609c31bfa8997debb3e71e75b9
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447962
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This practically reverts commit 2fe7aa5e4 [1].
The extra rte_bus was supposed to allow running SPDK
as a non-priviledged user by enabling RTE_IOVA_VA mode.
DPDK uses RTE_IOVA_PA by default - which means there are
physical addresses used as memseg IOVAs and hence the
root access is required to retrieve those physical
addresses. This patch was supposed to be paired with
a different DPDK patch of mine, but DPDK rejected that
one. Instead, in DPDK 18.11+ the user can force iova mode
by specifying --iova-mode=<mode> command line option,
where <mode> is either pa or va.
Either way, apparently there are cases where physical
address contiguity is required even without UIO (#707)
so let's revert this patch and consistently stick with
RTE_IOVA_PA.
SPDK requires some more effort to support running as
a non-priviledged user anyway.
Fixes#707
[1] env_dpdk/vtophys: register a fake rte_bus supporting RTE_IOVA_VA
Change-Id: I90bf097fd6a7f129444229dc7cf07a462d4f2d09
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448121
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Windows Virtio drivers use indirect descriptors without
negotiating their feature flag, which is explicitly
forbidden by the Virtio 1.0 spec. "(2.4.5.3.1 Driver
Requirements: Indirect Descriptors) The driver MUST NOT
set the VIRTQ_DESC_F_INDIRECT flag unless the
VIRTIO_F_INDIRECT_DESC feature was negotiated.".
Violating this rule doesn't cause any issues for SPDK
vhost, but triggers an assert, so we can only run Windows
VMs with non-debug SPDK builds.
This patch removes the assert and allows Windows VMs
to be run with debug versions of SPDK vhost.
Fixes#650
Change-Id: I95f534c33c384a4e1126a8c343c21eb63ec7bcef
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447803
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Introduce EMPTY, PRESENT and REMOVED states for Vhost SCSI targets. This
does not introduce any functional changes but opens a way to stop using
both removed flag and spdk_scsi_dev pointer as indicator if device is
removed or not.
Change-Id: Iecd76ffe9e8121cc1359b1e268eb21679d13598e
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447070
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
rte_vhost has rejected a patch with this feature, so
we implement it using the external rte_vhost msg handling
hooks directly in SPDK.
Change-Id: Ib072fc19b921fe0fa01c7f4892e60430232e3a1c
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447025
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Make the vdev initialization happen before calling
any vdev related functions. This is mostly needed
for an upcomming patch where additional step is
required after initializing the vdev and before
starting rte vhost.
On the other hand, this patch also fixes a technically
possible scenario where rte vhost starts processing
vhost-user messages and calling our ops before the
related vdev was initialized.
Change-Id: I8fbc7e7bc0b364327cfcec60faa74d4f64d6fad8
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447024
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
rte_vhost requires all queues to be fully initialized
in order to start I/O processing. This behavior is not
compliant with the vhost-user specification and doesn't
work with QEMU 2.12+, which will only initialize 1 I/O
queue for the SeaBIOS boot. Theoretically, we should
start polling each virtqueue individually after
receiving its SET_VRING_KICK message, but rte_vhost is
not designed to poll individual queues. So we use
a workaround to detect when a vhost session could be
potentially at that SeaBIOS stage and we mark it to
start polling as soon as its first virtqueue gets
initialized. This doesn't hurt any non-QEMU vhost slaves
and allows QEMU 2.12+ to boot correctly. SET_FEATURES
could be sent at any time, but QEMU will send it at
least once on SeaBIOS initialization - whenever
powered-up or rebooted.
Vhost sessions are still mostly started/stopped from
within rte_vhost callbacks, but now there's additional
concept of "forced" polling, in which SPDK starts
sessions manually, while rte_vhost still thinks the
sessions are stopped. This can potentially lead to cases
where a session is "started" twice, or gets destroyed
while it's still being polled (by force). Those cases
also need to be handled within this patch.
Change-Id: I70636d63e27914906ddece59cec34f1dd37ec5cd
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446086
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Array channels in the subsystem's poll group are indexed by
nsid - 1, so rename the previous num_channels to num_ms
makes more sense. Also embed the channels into a namespace
data structure here, and this can be reused in the following
patch.
Change-Id: If5d9aab4b1d5bcf7a3c22f29fa58d84752f0d4cc
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446211
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This unifies the clean up path between SRQ and normal
operation.
Change-Id: I396d7e3749579f27b5bb1e89b9d6761a77ba5beb
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446979
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Depending on whether SRQ is enabled, resources may be allocated
to the rqpair or to the rpoller. Create a struct to hold these
pointers that can be used in both locations to avoid duplicated
code.
Change-Id: I2c8fc59009201d9e41721e6462a81732b529a9e0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446978
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Eugene Kochetov <evgeniik@mellanox.com>
This wasn't used anywhere.
Change-Id: I405af3c808be284d19218f3f04c1e90e33e31de8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446977
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
This patch adds support for many-to-one configuration
for OCF bdev. Meaning that one cache instance can
be used to cache multiple core devices.
Without this change, it is not possible
to attach core device to existing cache instance.
Change-Id: Idfce023c08b6d41490d590a8abb51f626252cd4d
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/444277
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
FTL should pass IO errors to upper layer only in
completion callback to be consistent on sync and
async error paths.
Change-Id: I29c81af477b476c1e10b7933126737a222553ffa
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447176
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch allows to process more then one I/O
completion per reactor iteration.
Change-Id: Ib58013cd96c2b7fe378f175b34d58c6d1d219dcd
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447175
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_iscsi_conn_read_data was changed to use sock_readv
instead of sock_recv as a refactoring effort.
However this change caused about 3% performance degradation
for write I/O.
Hence this patch changes spdk_iscsi_conn_read_data to use
sock_recv and changes spdk_iscsi_conn_readv_data to call
spdk_iscsi_conn_read_data if iovcnt is 1.
Change-Id: I5fcad03ff23dee4e9954eee879225d3c493be52e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448021
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_iscsi_get_dif_ctx() didn't work correctly for Data In PDU
because we had to get iSCSI task from PDU directly for Data In PDU,
and lun_id was not copied in spdk_iscsi_task_get().
This patch fixes these bugs and the DIF strip feature was verified
after applying this patch.
Change-Id: I74d404b82c4a9502a9a8e166748f817d3c2e4368
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447884
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Users may want to connect specified controller at running time,
so this API will connect to the controller and return probe context
to users, users must call spdk_nvme_probe_poll_async() to initialize
the controller to the READY state before using it.
Change-Id: I232886b000454ee826ea73c4e1043d0d18ee0ec6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445657
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Those targets use the same directories for temporary
files and at the moment they race with each other. We're
seeing intermittent failures on CI:
```
INSTALL [...]/ocf/env/src/ocf/utils/utils_list.c
rm: missing operand
```
```
INSTALL [...]/ocf/env/src/ocf/utils/utils_device.h
INSTALL [...]/ocf/env/src/ocf/utils/utils_io.c
rm: cannot remove [...]/ocf/env/src/ocf/utils': Directory not empty
```
Fixes#709
Change-Id: I9bf6ee7a97144afafbb643a0e350f38abe79270f
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447750
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The purpose is to use the single readv to read both
the payload the digest(if there is a possible one).
And this patch will be prepared to support the
multiple SGL in NVMe tcp transport later.
Change-Id: Ia30a5e0080b041a65461d2be13db4e0592a70305
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447670
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
VHOST_USER_SET_VRING_CALL invalidates the previous
file descriptor that SPDK may be using on a different
thread. The new descriptor is stored inside rte_vhost
internals and is queryable with rte_vhost APIs, but
those APIs are too expensive to be called every tick
or every time we need to use that fd. Hence, we will
now stop the entire vhost session before processing
SET_VRING_CALL msg and restart it right after. SPDK
will query the most recent call descriptor on session
start.
We do not necessarily have to stop the device - just
letting the session know that its callfd has changed
would be enough. That's an area for future optimization.
Change-Id: Idccf56fccd21ad0d3c2307eefee7bf35e350fec6
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447639
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
DPDK 19.05+ gives us an ability to pre or post-process
any single vhost-user message. The user can either perform
additional actions upon some generic events, or can
implement handling for brand new message types that
rte_vhost doesn't even know about.
In order to smoothly switch to the upstream rte_vhost
and drop our internal copy, we introduce an SPDK wrapper
function to register SPDK-specific message handlers. For
DPDK 19.05+ this will use the new rte_vhost API to
register those message handlers, and for older DPDKs
this function simply won't do anything - as w assume the
internal rte_copy already contains all the necessary
changes and does not need any "external" hooks.
For now we use the message handlers to stop the vhost
device and wait for any pending DMA ops before letting
rte_vhost to process the SET_MEM_TABLE message and unmap
the current shared memory.
Change-Id: Ic0fefa9174254627cb3fc0ed30ab1e54be4dd654
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446085
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Our internal rte_vhost lib requires SET_VRING_ADDR to
flush a pending SET_MEM_TABLE. On the other hand, the
upstream rte_vhost will invalidate the entire queue
upon receiving SET_VRING_ADDR message, so we mustn't
send it at runtime. Both behaviors are strictly
implementation specific, but this message isn't needed
by the spec, so send it only if vhost was compiled
with our internal lib.
Change-Id: I200b99a1dd5124bdebd104e69ae1b012a974ab6f
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446087
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Those will be reused by the vhost target and
its message handling hooks.
Change-Id: If41118e3700f3b445312bb691c493bd13134546b
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446084
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Make struct vhost_user_msg match the format defined in
the vhost-user spec. The custom additions were inhereted
from DPDK, but SPDK never made use of them. Also replace
direct sizeof(*msg) usages with a handy macro that was
already there. Finally add a VHOST_USER prefix to the
VHOST_MEMORY_MAX_NREGIONS #define.
Change-Id: Idef60fdc62a9e96f076059d60aad796fcc9d3e1c
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446083
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It's disabled by default, so no functionality is changed yet.
The intention is to use the upstream rte_vhost from DPDK,
which - starting from DPDK 19.05 - is finally capable of
running with storage device backends.
SPDK still requires a lot of changes in order to support
that upstream version, but the most fundamental change is
dropping vhost-nvme support. It'll remain usable only with
the internal rte_vhost copy and with the upstream rte_vhost
it simply won't be compiled. This allows us at least to
compile with that upstream rte_vhost, where we can pursue
adding the full integration.
Change-Id: Ic8bc5497c4d77bfef77c57f3d5a1f8681ffb6d1f
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446082
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Generate and insert DIF for write I/O by stream fashion in
spdk_iscsi_read_pdu().
Verify DIF for read I/O in spdk_iscsi_conn_write_pdu().
Verification can be done in spdk_iscsi_build_iovs(), but how many
writes to socket is not known beforehand, and same range may be
verified multiple times. So verify DIF before starting to write to
socket.
Change-Id: I860637758164b7d518c38fe92356562cbbe3d8f8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446406
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Add an new API spdk_dif_generate_stream() to insert DIF into
the metadata space of newly read data block by stream fashion.
This API is tested by replacing the previous DIF generation such
that DIF is generated once all data was read.
Change-Id: I757b4e6f10fe2d9d643f56ebb678c731cdad63bb
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446594
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
This patch leaves metadata space in data buffer for read or write I/O
to generate and verify DIF.
For write I/O,
- in spdk_iscsi_read_pdu(), leave metadata space for every block
by calling spdk_dif_set_md_interleave_iovs() and then
spdk_iscsi_conn_readv_data(), and remember this in PDU.
- in spdk_iscsi_op_scsi() and spdk_iscsi_op_data(), set not data
length but buffer length to length of an iovec. The reason is
that the actual data length sent to SCSI layer will be larger
than the data length set in PDU. SCSI task holds data length
as an independent member and this change doesn't loose any
information.
For read I/O, in spdk_iscsi_build_iovs(), leave metadata space for
every block by calling spdk_dif_set_md_interleave_iovs().
The reason why DIF context is saved in PDU is that DIF verification
will be done in spdk_iscsi_conn_write_pdu() and DIF context will be
used there first.
Change-Id: Iac5739211f26a91b00a4ecf2f306bbecec3d78dd
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446382
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Increase the size of write (data out) buffers and immediate
data buffers in the iSCSI library to store DIF. Increase is the
amount necessary to store 16 byte metadata block to the block
formatted iwth 512 + 16. 512 + 16 is the current maximum ratio
of metadata per block.
Use the macro SPDK_BDEV_BUF_SIZE_WITH_MD defined in
include/spdk/bdev.h for this purpose.
Besides, change the name of a helper function from
spdk_get_immediate_data_buffer_size() to
spdk_get_max_immediate_data_size() to differentiate the maximum
data size and the buffer size, and then to use the macro.
Change-Id: I626f8045ff706e1a6d79fa298261769bc96b7d8b
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447011
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Increase the size of small and large buffers in the bdev layer
to store DIF. Increase is the amount necessary to store 16 byte
metadata to the block formatted with 512 + 16. 512 + 16 is the
current maximum ratio of metadata per block.
This change will be done in the iSCSI library in the next patch
and other libraries may be done later.
Hence add and use an new macro SPDK_BDEV_BUF_SIZE_WITH_MD(x) for
convenience.
Change-Id: I4b5498f56c9baf3e3ed93dd1c757998d7ce65141
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/444558
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use new queue API to manage OCF queues dynamically
This change allows for dynamic creation and deletion of queues
on get_ and put_ io channel.
Qeueues no longer depend on number of cores in SPDK.
Queue-to-pollers mapping list is removed as well
as locks "q_ocf_lock" and "vbdev->_lock" as they became redundant
Change-Id: I5069e1f8535f505816184a333db876afb925ac44
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446841
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
According to the implementation of VPP, the vppcom_session_write() may
cannot write all provided buffer, and we shouldn't continue in this
case, just like usage of vppcom_session_read().
Change-Id: I419efc2812e3aa261a75ddbd3f7cfec60a5376d3
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447540
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We were only using one pd per device anywas, and this is necessary for
shared receive queue support.
Change-Id: I86668d5b7256277fe50836863408af2215b5adf9
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447385
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Unregister calls are not guarded. Fix this by chekcing status before
doing unregister.
Change-Id: I593e27efdae17f6d89362fd8e4edccf2af2b7281
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445894
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Retry mechanism will stuck if there is no outstanding
IO after completion with ENOMEM. This should never
happen.
Change-Id: I58ebf8cc8a498231beef43ac20f58eeaad89afda
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446610
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The calling of spdk_bdev_finish is in wrong place,
the bdev subsystem recycling will be called by
_spdk_subsystem_fini_next. If we call spdk_bdev_finish
here, it will be called twice, so it is unnecessary.
And this patch will be used to address the issue
reported in:
https://review.gerrithub.io/#/c/spdk/spdk/+/447613/
Change-Id: I03dff8b84bd0d7b49675ce8300b3da623963e140
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447731
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This was a result of a merge conflict with the recent 1fc4165 merge
which modified the ISA-L includes. We now need to use isa-l/include/x.h
format when including ISA-L files.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifa38db396152d2aa4279a0dade7d47a5b9a2ba60
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447493
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Both Mellanox and Soft-RoCE NICs work with this approach.
Change-Id: I7b05e54037761c4d5e58484e1c55934c47ac1ab9
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446134
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Persist through power loss feature is not supported for now.
Change-Id: Id2a5088389dc28b9d28d88c04ff819d20ea11902
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436940
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For number of registered controllers field in Reservation
Status Data Structure, we caculate all the controllers
in the subsystem which Host Identifier are same with
existing registrants.
Change-Id: Ib4de22c7020dbd8294f448f23c0c5c8c142629dd
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436939
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The possible issue could be following if you shutdown NVMe-oF target
with TCP transport as an example,
=================================================================
==61022==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 560 byte(s) in 1 object(s) allocated from:
#0 0x7ffff6efcfe0 in calloc (/lib64/libasan.so.3+0xc6fe0)
#1 0x4c6216 in spdk_nvmf_tcp_listen /home/ziyeyang/spdk/lib/nvmf/tcp.c:680
Indirect leak of 48 byte(s) in 1 object(s) allocated from:
#0 0x7ffff6efcfe0 in calloc (/lib64/libasan.so.3+0xc6fe0)
#1 0x4a77b8 in spdk_posix_sock_create /home/ziyeyang/spdk/lib/sock/posix/posix.c:291
After checking the issue, it seems that we did not call
spdk_nvmf_transport_stop_listen when removing the subsystem listener.
And this patch can solve this issue.
Change-Id: Ic75d99cb0c6a3ba1c47ac79a2d8e3887b0f6b012
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447020
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch extends existing ISA-L support for NVMe/SCSI T10 CRC-16
protection check (PI). The choice of which algorithm to use is set
via an existing configure parameter. The default for x86 systems with
appropriate CPU instructions is to us ISA-L.
Testing shows that PI checking/generation will run at device speed using
ISA-L. The table-based algorithm is much faster than the original algorithm
and is provided to speed up calculations on non-x86 systems.
This patch also fixes one issue in a false configure error if nasm
is at a higher version than currently checked (i.e. 2.13.03)
Local performance testing yeilds these results:
Original - 15 mbit/sec. (code removed)
Table - 400 mbit/sec. (27 times faster than original)
ISA-L - 3,400 mbit/sec. (227 times faster than original)
Signed-off-by: James Bergsten <jamesx.bergsten@intel.com>
Change-Id: Idc7f1d97252644d839621ffe9fa995edd922da52
Signed-off-by: James Bergsten <jamesx.bergsten@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/443646
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Functions moved in this patch may be used in future by
other NVMe based bdevs.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I975b61b7f78855e67d65ab7d9fd9f5dd859ac570
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/443753
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Renaming functions to make it clear they are not part
of the public API.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I9a283143a11090032b74684611403637bc6605a3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447056
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The reservation holder may release the reservation on
a namespace, release notification feature is supported
in comming patches.
Change-Id: If5d3158e691fcc782f7cf0b67a326bf62edf0531
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436938
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For API spdk_nvme_connect(), users can only use NULL or
struct spdk_nvme_ctrlr_opts for their own driver options,
so parameter opts_size doesn't take effect here. Since
some applications outside SPDK's git repository are using
such API, so we only remove the internal data structure
for now.
Change-Id: Ia727d2950d56abba637214ad17ecfa3eeab71d38
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445656
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Free the probe context after the controllers in the probe
context list become READY. Then users don't need to free
the context which is allocated by SPDK driver.
Change-Id: I2dcb76bacf26a401b5b559c4326764a4ddb97e83
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446820
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This isn't required anymore because spdk_subsystem_init
is now always called after an event has been executed, so it
always runs after the framework has initialized.
Change-Id: I05e1a4dd605f27247b6d43f5234173e07d9b9dd2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446996
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Just use a function pointer and a context.
Change-Id: I2d41ed2572d892f3328aadf7f22d8696816bf4d1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446995
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now that the boot strap event exists, this is not
necessary.
Change-Id: I277179fbc15ebe140fd22be1b67847cf23c6153e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446994
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It just takes a function pointer and a context instead.
Change-Id: Id8cdc968ddbc3776f60ad73e9aa09983ca03fa3f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446993
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Ths patch adds an API spdk_iscsi_get_dif_ctx().
When opcode of BHS is SCSI command, spdk_iscsi_get_dif_ctx() extracts
CDB and LUN ID from BHS. When opcode of BHS is Data Out or Data In,
spdk_iscsi_get_dif_ctx() extracts TTT and get R2T task corresponding
to TTT, and gets CDB and LUN ID from the task.
Then spdk_iscsi_get_dif_ctx() gets LUN by using LUN ID and calls
spdk_scsi_lun_get_dif_ctx().
Additionally spdk_iscsi_get_dif_ctx() checks the state of the connection
and the type of the session is valid before starting decode operation
because contents of PDU is not reliable when the state of the connection
is invalid. The necessity of the check was found by the Calsoft test tool.
Checks and test cases are not matched yet but copying existing checks
from spdk_iscsi_conn_execute, spdk_iscsi_op_scsi, and spdk_iscsi_op_data
will be enough. The check added for Data Out is not necessary for Data In
but it will not be harmful for Data In.
Change-Id: Iba09e0ac3e760aa1c5b582a120596c49b9e9d51e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446231
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch adds an API spdk_scsi_bdev_get_dif_ctx().
spdk_scsi_bdev_get_dif_ctx() decodes opcode in CDB, and if opcode
is read or write block commands, it gets LBA and use the lower
32bits of LBA as Reference Tag. It gets DIF information from
specified bdev next. Then it sets all to DIF context and return.
spdk_scsi_bdev_get_dif_ctx() is exported to iSCSI through
spdk_scsi_lun_get_dif_ctx().
Change-Id: Id8aac164c48e9e9d4ff7cfc9fa81bb5090f3e187
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446224
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Upcoming patches will store larger data in the data buffer than
iSCSI Initiator transfers, and size of metadata is not known until
asking to SCSI layer. This addition will be used to avoid overflow
in them.
Change-Id: I43e15d0cfbfddcf01342325b134d90e3d7dae038
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446378
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds spdk_iscsi_conn_readv_data() to read PDU data
from network socket by using spdk_sock_readv().
Additionally, this patch changes the existing spdk_iscsi_conn_read_data()
to call spdk_iscsi_conn_readv_data() by creating a single struct
iovec.
Change-Id: Ied487bb71bd4261ad53c9f3744ae272e65f98d7a
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446377
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add an new API spdk_sock_readv(sock, iov, iovcnt) to the sock
library. This will be used in SPDK iSCSI target first.
Implementation was done based on vcom_socket_readv in VPP.
Change-Id: I88a8f2af4856b1035165b78d76b4a4f4587b265d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446343
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is already done for JSON info dump. In addition, the
spdk_vhost_scsi_dev_get_tgt function might implement additional logic to
no return SCSI targets under removal process.
Change-Id: I21d6f660926091dfd34da553705116926f27b30d
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446910
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a check if the number of blocks of read I/O is not larger
than allowed. This is a preparation to the subsequent patches that
support DIF in NULL bdev.
Change-Id: I82d4c835788d2f347fd5fdef82e1def313dd49a1
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446052
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch adds an API spdk_dif_set_md_interleave_iovs().
This function is used to leave a space for metadata for each block
when the network socket reads data, or to make the network socket
ignore a space for metadata for each block when the network socket
writes data. This function removes the necessity of data copy in
the SPDK application during DIF insertion and strip.
Change-Id: I018efd77bdadcaec4679eea4dc1e404f155b0879
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446216
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK iSCSI and SCSI target don't expose any metadata and DIF settings
to the corresponding iSCSI and SCSI initiator.
Even when SPDK iSCSI and SCSI target allocate any bdev formatted
with DIF, SCSI commands sent from iSCSI and SCSI initiator don't
have any metadata and DIF information.
For that case, iSCSI target inserts and strips DIF on behalf of
iSCSI and SCSI initiator.
Hence SPDK SCSI target has to use data block size not including
metadata to process SCSI commands correctly.
This patch replaces spdk_bdev_get_block_size by
spdk_bdev_get_data_block_size in necessary places.
Change-Id: I264c8e532d1d1b016f6d8774c8ec03389528044f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445083
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
iSCSI target will need to get data block size except for metadata.
Other SPDK application may need to get the same information
future. Hence this patch adds an new API spdk_bdev_get_data_block_size
to bdev layer. In the header file, spdk_bdev_get_data_block_size
is located next to spdk_bdev_is_md_interleaved to avoid confusion
by new users.
Change-Id: I0fd2a6d0bcf6a4c18c583f70d96cc5035fc57fe9
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445082
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Unregistering by a host may cause a reservation held by the host
to be released. If a host is the last remaining reservation holder
or is the only reservation holder, then the reservation is released
when the host unregisters. This may occur with Acquire/preempt
and Register/unregister commands.
Change-Id: If59fe2fdaa69c8ad70f364618d6c281494ad6245
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446821
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A registrant can obtain a reservation on a namespace by executing
acquire command. Acquire command is associated with specific namespace.
For now only Acquire and Preempt reservation acquire action is
supported, Preempt And Abort will be supported in future.
Change-Id: Ifcbb6b414827393ffc266ceada5982b743716321
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436937
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reservations can be used by two or more hosts to coordinate
acccess to a shared namespace, host must register to a namespace
prior to establishing a reservation. Unregistering by a host
may cause a reservation release, this feature will be supported
after reservation acquire patch.
Change-Id: Id44aa1f82f30d9ecc5999a2a9a7c20b2af77774a
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436936
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Borrow the ideas from iSCSI and optimize
the nvme_tcp_build_iovecs function.
Change-Id: I19b165b5f6dc34b4bf655157170dec5c2ce3e19a
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446836
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
New API added for upper level to get controllers'
supported flags.
Change-Id: I51e9d0e57c355fa37f092602a94f4c08deb8898c
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446091
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Take a callback and an argument instead.
Change-Id: I9edda1a9bd506e12f309e52e520e97c0d705d6a2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446992
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Now that there is always one event to bootstrap,
we don't need an event here.
Change-Id: Ic87501461a608f5b15745a50b6e15f0f28aa55c2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446991
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
These can now be delayed. Next they'll be converted to thread
operations instead of events.
Change-Id: Id8c183621fb88594a9fd508eff064b4a1557a5b6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446989
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
- locks moved from ocf to adapter code,
- 'data object' renamed to 'volume',
- context and volume API reorganized.
Change-Id: Id4670ddfcb8eda9aefabc273497498c5bd3db1d5
Signed-off-by: Michal Mielewczyk <michal.mielewczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/444092
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Robert Bałdyga <r.baldyga@hackerion.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will make it easier to convert these operations to
spdk_thread_send_msg.
Change-Id: I4c975c22f3967a7197e69ccd230a14bdb97ba332
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446988
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The rest of the stuff is going to be converted to using threads,
but there must be one event at the beginning of time for
now.
Change-Id: Id4689d73e006ccf7bbe001732798e0ae78c603ac
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446987
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We never used this anywhere, and I need to move to a model where
the start up action is a thread message instead
Change-Id: I6b21ba9afb93a3245aceca2fe24713ffd16d0933
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446986
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will help keep the definition of that function fresh as things
change around it over time.
Change-Id: Id30864df132459a0ff889a725aa70abe072f3087
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446972
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Since the fuzz tester will be submitting random commands with random
memory addresses and such to the NVMe drives, we want to be especially
sure that we are using the IOMMU while running this test to prevent
memory corruption in the event that an errant command triggers a bad
DMA.
This function exposes to the application whether or not we are using the
IOMMU.
Change-Id: Ie4d26c706967a520967bfc81f72f7b581b792437
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446568
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Not all RDMA drivers fail back the dummy recv and send operations that
we send to them when destroying a qpair. We still need to free the
resources from these qpairs to avoid eating up all of the system memory
after multiple connect and disconnect events. Since we won't be getting
any more completions, the best heuristic we can use is waiting a long
time and then freeing the resources.
qpair_fini is only called from the proper polling thread so we can safely
call process_pending to flush the qpair before closing it out.
Change-Id: I61e6931d7316d1e78bad26657bb671aa451e29f4
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/443057
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
spdk_bdev_nvme_lookup_ctrlr can be replaced with existing
nvme_bdev_ctrlr_get_by_name function.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Id85243b13099b2976e1368e481201ccf27ce6ddb
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446437
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will make possible to make some NVMe bdev related
functionalities to be common for NVMe and FTL bdevs.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Iafc2acc3ac54deb762bc7205180f41d5befbb42b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/443552
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Bdev NVMe controller will be used in future by other
NVMe based bdevs, so let's move it to common layer.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ic485b556d622011b9e36fec1ce13394fc436bbd8
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446434
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
nvme_ctrlr structre will be moved to common files in next
patch, so let's change its name to more representative.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Id51c19437c2d4ba479407201b062266807156c0b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446248
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For now these are empty files, but there will be some
code in these files in following patches.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ie45d6d3314c424f9af84bb3b0eba00de45215db5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446247
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a beginning of series that will provide
common code for all NVMe based bdevs.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I097b4a03ef79277659f45d217c7e4e58236c98bf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445893
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We specify the --match-allocations rte init parameter
now, which gives us guarantees that memory will be
freed in the same units it was allocated.
Note that if user initialized DPDK separately from
SPDK, we aren't sure if --match-allocations was
specified, so will still mark the segments to not
be freed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I599747d4b917e91adfabf64c904cd7891a77b3cf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446459
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This function indicates whether DPDK was initialized
external to the SPDK env_dpdk library.
This can be used in cases where we need to implement
different behavior when DPDK is initialized outside
of SPDK - in that case certain flags that SPDK would
prefer may not have been specified. This will
be used in the next patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I58d285bd4d9cda96b108624d65dedbec32164cfe
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446458
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
io_types like FLUSH and RESET are not always supported
by base bdev modules. For example: virtio_blk bdev doesn't
support FLUSH; ocf or ftl vbdev doesn't support RESET.
Change-Id: I569ea75f8242c8bf082d7d89996ad1c7b1791570
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446493
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
FLUSH io_type shares a same process with UNMAP, except
that in the end, it calls spdk_bdev_flush_blocks function.
Change-Id: I4529bf29b7cd9f16d10f2edc99a20d25213c9c71
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446492
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For consistency, made similar change on WIP compress patch and
want to make sure the PT bdev module is as correct as possible to be
used as a template.
Change-Id: I9d2d775b7878edd16df3c283c169746fc821c8e5
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446456
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The operation to read data segment of PDU will be enhanced to
support DIF insert operation ofr write I/O.
This patch factors out check data segment length operation into a
function to make the enhancement easier.
Change-Id: I4fbc3bd440192b3723435c9acf3b6b46d3ce4939
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446342
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_iscsi_build_iovs() has the common pattern among segments, and
introduce a temporal context to factor out the common pattern into
a helper function. This will make subsequent patches easier to add
code about DIF strip in spdk_iscsi_build_iovs().
Change-Id: I307d8d0501910071b23a8c0d8eb5e19a4d1684c4
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446573
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Upcoming patches will support DIF insert and strip feature in
iSCSI target and the feature will be implemented by utilizing
iovecs.
Even when we support the DIF feature, we want to keep current
batched PDU flush, and current requirement that there must be
enough free iovecs to map all segments of a PDU is too strict.
This patch alleviates the requirement by passing remaining
number of iovecs to spdk_iscsi_build_iovs().
Change-Id: I6206322839c363e0ff5abe84bfd524bdc09e23ca
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446176
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
To know the mapped length by iovecs, pdu length was got first and
then the size of partial written was reduced separately.
This patch unifies these two operations into spdk_iscsi_build_iovs().
Change-Id: Ic6f5eecc902b8e209ef00c010915f476ca16c002
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446175
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Building iovecs had been done in spdk_iscsi_build_iovs() and
fast-forwarding iovecs for the partially written first PDU had
been done in-line separately.
This patch unifies these two operations into spdk_iscsi_build_iovs().
Fast-forwarding iovecs is necessary only for the first PDU, but the
operation is applied to all PDUs after this patch.
Extra overhead will be negligible because usually at most two
iovecs are consumed, one is for the base header segment and another
is for the data segment.
Change-Id: I8feafac6d280439eb7cf73136107adbac820ae09
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446174
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
iovec_cnt and iovec_array are very descriptive and good but iovcnt
and iovs are often seen in SPDK and will be enough.
Subsequent patches will add some changes on iovec operations and
simple and familiar names will be helpful to work and review them.
This patch doesn't change any behavior.
Change-Id: I89ff74809a0ddbb358e3fc8fdc353a47338cc3c5
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446173
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
This function add possibility to check if there are any scheduled operations
on particular thread.
Return from spdk_thread_poll() will be used as a way to load-balance and
signify if any work was performed during the single iteration.
A poller could return 0, but still be registered.
This helps especially in fio_plugin that only checked active_pollers or
messages via spdk_thread_poll().
Change-Id: Id6237278eb3b4bd4922b2abaa3c8ebd5e434d45d
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/445915
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This function add possibility to check if there are registered pollers
on particular thread.
Change-Id: I80af06a10c5c1b54fed5bb28a3aa769a52d8a206
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/446624
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The nsdata assignment is strangely aligned with some
variable declarations - fix it to make it more clear.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I43b1a6d5a69ca035a21f3996e8f859a45bd10b9c
Reviewed-on: https://review.gerrithub.io/c/446447
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
* Remove unneeded include files. Some of them belong in the .c file instead.
* Use create/delete_aio_bdev naming, removing aio_disk names
* Make some similar changes in the bdev_aio.c file for the associated ctx.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie325f4761f0419e9cc4e6556ab551fe606cd0d6c
Reviewed-on: https://review.gerrithub.io/c/446567
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This RPC was deprecated a couple of releases ago.
bdev modules now each have their own RPC for deleting
bdevs. Due to how bdevs are created differently on
different modules, it is simply not possible to
have one delete_bdev RPC that would work for all bdev
types.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia46c95dce6e35f7557e8d41c41b8fea382924547
Reviewed-on: https://review.gerrithub.io/c/442615
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We have conflict to handle the NVMf subsystem shut
down. The situation is that:
If there is shutdown request (e.g., ctrlr+c),
we may have subsystem finalization and subsystem
initialization conflict (e.g., have NVMf subsystem fini and
intialization together), we will have coredump
issue like #682.
If we interrupt the initialization of the subsystem,
following works should do:
1 Do not initilize the next subsystem.
2 Recycle the resources in each subsystem via the
spdk_subsystem_fini related function. And this patch will
do the general thing, but will not consider the detailed
interrupt policy in each subsystem.
Change-Id: I2438b4a2462acb05d8c8e06dfff3da3d388d4b70
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/446189
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Other io_type, like FLUSH, has a similar character with
UNMAP, that has a range description (offset and length),
but has no data payload. So the process for UNMAP io_type
can be extended to io_type like FLUSH.
Change-Id: I9467dfc3cc4fc1431b79359b0c477807ec138ac7
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/446491
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
In the error path, we were first decrementing a variable and then
asserting that it must be >0. These operations should occur in the
opposite order.
Change-Id: I6cec544faf17bb75cbfca3d3a3c173dc5db14f99
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/446440
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When the decision was made to uncouple the number of shared buffers from
the queue depth and allow the user to decide for themselves, the default
was also significantly lowered, which caused some issues when trying
torun performance tests (See https://github.com/spdk/spdk/issues/699).
While this is a user modifiable variable, it is still best to keep the
higher default value.
The original value was equivalent to max_queue_depth *
SPDK_NVMF_MAX_SGL_ENTRIES * 2 with the defaults for max_queue depth and
max_sgl_entries being 128 and 16 respectively. Hence 4096
fixes: 0b20f2e552
Change-Id: I809e97a10973093a2b485b85bca7160091166f70
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/446525
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Default 'unmap' option stays as it was.
'Write_zeroes' comes useful when one wants to make sure
that data presented from lvol bdevs on initial creation presents 0's.
'None' will be used for performance tests,
when whole device is preconditioned before creating lvol store.
Instead of performing preconditioning on each lvol bdev after its creation.
Change-Id: Ic5a5985e42a84f038a882bbe6f881624ae96242c
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442881
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
base_bdev_io_expected can be used for the situation
that IO requries multiple and uncertain number of
base bdevs.
Change-Id: I912400f839c02c95606bc94e7c8ad4946e90b6bf
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/446009
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This feature was added to DPDK by Jim to avoid the failures that can
come from splitting a buffer over memory regions in RDMA.
Change-Id: I13b646e22a4e2a4ccf915b0274061d31d02c03f7
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/446166
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since we already checked the core info in _spdk_subsystem_fini_next
function.
Change-Id: I6ab28d8fb11a7a07ae8c14c27357db236bf51b3e
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/446190
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: qun wan <qun.wan@intel.com>
If success is false in each bdev module's spdk_bdev_io_get_buf_cb,
call spdk_bdev_io_complete with SPDK_BDEV_IO_STATUS_FAILED, and
then return.
Change-Id: I6f106d8d39a3616f7305201fa2efc4805d4d00ee
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/446046
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Break out the failure handling code to a separate
function.
Change-Id: Ic530bb4d33c19edb62360e06afe3946b963445b1
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/446008
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
When the specified buffer size to spdk_bdev_io_get_buf() is greater
than the permitted maximum, spdk_bdev_io_get_buf() asserts simply and
doesn't call the specified callback function.
SPDK SCSI library doesn't allocate read buffer and specifies
expected read buffer size, and expects that it is allocated by
spdk_bdev_io_get_buf().
Bdev perf tool also doesn't allocate read buffer and specifies
expected read buffer size, and expects that it is allocated by
spdk_bdev_io_get_buf().
When we support DIF insert and strip in iSCSI target, the read
buffer size iSCSI initiator requests and the read buffer size iSCSI target
requests will become different.
Even after that, iSCSI initiator and iSCSI target will negotiate correctly
not to cause buffer overflow in spdk_bdev_io_get_buf(), but if iSCSI
initiator ignores the result of negotiation, iSCSI initiator can request
read buffer size larger than the permitted maximum, and can cause
failure in iSCSI target. This is very flagile and should be avoided.
This patch do the following
- Add the completion status of spdk_bdev_io_get_buf() to
spdk_bdev_io_get_buf_cb(),
- spdk_bdev_io_get_buf() calls spdk_bdev_io_get_buf_cb() by setting
success to false, and return.
- spdk_bdev_io_get_buf_cb() in each bdev module calls assert if success
is false.
Subsequent patches will process the case that success is false
in spdk_bdev_io_get_buf_cb().
Change-Id: I76429a86e18a69aa085a353ac94743296d270b82
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/446045
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
VMWare Workstation NVMe emulation does not seem to write the
SHST_COMPLETE bit within 10 seconds, resulting in an ERRLOG
during detach/shutdown. So add a quirk to cover these VMWare
SSDs. But rather than squashing the ERRLOG completely for
these SSDs, just add a message instead indicating this is
somewhat expected on these VMWare emulated SSDs.
Fixes issue #676.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3dfcb631feda639926fd712f1f41abb66cbf2096
Reviewed-on: https://review.gerrithub.io/c/445942
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Adapted our custom rte_vhost APIs to the upstream DPDK
version which has independently added similar APIs.
This will potentially allow us to remove our internal
rte_vhost copy.
rte_vhost_set_vhost_vring_last_idx() was renamed to
rte_vhost_set_vring_base() and the last vring indices
have to be acquired with a newly introduced rte_vhost_get_vring_base()
rather than rte_vhost_get_vhost_vring().
This is only a refactor, no functionality is changed.
Change-Id: I1ca2c1216635c117832c9d9c784d5661145c04cd
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/446081
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The elements and functions which are used for raid reset io,
can also be used for other potential raid IO requests which
need multiple base_bdev involved.
Change-Id: Ide7ea190fdbd29da9f9fa22862a0a7c162509697
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441308
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Make modyfication of global allocator index tread safe
by using atomic operation
This patch also changes mempool size to be 2^n - 1
which makes it more efficient
Change-Id: I5b7426f2feef31471d3a4e6c6d2c7f7474200d68
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442695
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Removing band from "free list" is moved from FTL_BAND_STATE_OPENING
to FTL_BAND_STATE_PREP state's change actions.
This will fix race condition when one band is prepared (erased)
and write pointer is trying to get next active band.
Change-Id: I9e4fe9482a01ee732271736e4a0e6fcedf2582d8
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/445118
Reviewed-by: Jakub Radtke <jakub.radtke@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
ENOMEM is expected when nvme_qpair will be out of resources.
In such a case ENOMEM shall be propagated to allow upper (bdev)
layer proper handling.
Change-Id: Ie647c2d3efff24a8de949a22ac42a31dfd0e78b7
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/445580
Reviewed-by: Jakub Radtke <jakub.radtke@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When an operation fails, we shouldn't pass a handle or
a 'valid' blob ID to the caller's completion function.
The caller *should* ignore it when bserrno != 0, but
it's best to not take that chance.
Fixes#685.
Note: #685 seems to have a broader issue related to
a possibly locked NVMe SSD in the submitter's system.
This only fixes the assert() that was hit.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3fb3368ccfe0580f0c505285d4b1e9aca797b6a6
Reviewed-on: https://review.gerrithub.io/c/445941
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
There are some cases that virtual bdev open and close
the device and QoS will be disabled at the last close.
In this case, when a new bdev open operation comes again,
the QoS needs to be enabled again.
Change-Id: I792e610f4592bad1cac55c6c55261d4946c6b3e2
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442953
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
SPDK ring size used for write buffer submission queue
must be increased if required number of batches is a
power of two.
Change-Id: I9b9f885064cf6f0f5fe94b0ed4f9d49a4e5c0cd0
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/445721
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For real PCIe drives, if we removed one drive, existing hotplug
monitor will trigger the remove callback twice, there is one
workaround for vfio-attached device hot remove detection which
will also trigger the hot removal callback. For now we add
the check in the bdev_nvme layer so that coredump will not happen.
Fix issue #606.
Change-Id: I0605fbdf391fed20c4aa9a2d54b4f059f29dc483
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/445642
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It seems like DPDK 19.02 has split the "session mempool"
into two separate mempools but this isn't really described
in the DPDK release notes, so this patch only makes our
crypto code behave just like DPDK crypto examples.
rte_cryptodev_queue_pair_setup() no longer accepts
a separate mempool parameter but instead requires it
to be passed through a new field in struct
rte_cryptodev_qp_conf, which is also passed as a param
to rte_cryptodev_queue_pair_setup(). It's referred to as
"session private mempool" instead of "session mempool",
which makes some sense since we already use
rte_cryptodev_sym_get_private_session_size() (with the
word "private" in name) to calculate its size.
The other mempool - "session mempool" - now has to be
allocated with rte_cryptodev_sym_session_pool_create()
instead of regular rte_mempool_create().
Change-Id: I3bc6185855988b864ca59bc1972beaf4f7ea8925
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443738
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
I think this simplifies the process a little bit.
Change-Id: Icc87a59c9f6fd965ef35531975b7036d85c4bc95
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/445916
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We were only using one value from this array to tell us if the qpair was
idle or not. Remove this array and all of the functions that are no
longer needed after it is removed.
This series is aimed at reverting
fdec444aa8 which has been tied to
performance decreases on master.
Change-Id: Ia3627c1abd15baee8b16d07e436923d222e17ffe
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/445336
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Since we no longer rely on the state queues for draining qpairs, we can
get rid of most of them. We cn keep just a few, and since we don't ever
remove arbitrary elements, we can use stailqs to perform those
operations. Operations on Stailqs carry about half the overhead as
operations on tailqs
Change-Id: I8f184e6269db853619a3581d387d97a795034798
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/445332
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Users should not access the internal probe context fields when
using the asynchronous probe API, so change spdk_nvme_probe_async()
to let it can only return the probe context pointer.
Change-Id: I0413c2d8db6cbe4539ad80919ed34dd621a9df70
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/445870
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Allow user to add seed value for guard compuation to DIF context.
This will avoid the guard being zero in case of all zero data.
NVMe controller doesn't support seed value for guard computation
explicitly, and hence if we want to use such a seed value in
NVMe controller, we have to format metadata more than 8 byte,
and add seed value into the reserved metadata field.
But some popular iSCSI/FC HBAs and SAS controllers have supported
seed value for guard computation, and so supporting seed value
in the SPDK DIF library is very helpful for some use cases.
Hence this patch makes the DIF library possible to specify seed
value for those use cases.
Change-Id: I7e9e87cb441bf263e64605c7820409fdc22dd977
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444334
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Older versions of QEMU (<= 2.11) expose the VGA BIOS
hole (0xA0000-0xBFFFF) by specifying two separate memory
regions - one before and one after the hole. This results
in the "size" not being a 2MB multiple. But the underlying
memory is still mmaped at a 2MB multiple - so that's what
we should be checking to ensure the memory is hugepage backed.
Fixes#673.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1644bb6d8a8fb1fd51a548ae7a17da061c18c669
Reviewed-on: https://review.gerrithub.io/c/445764
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_env_opts->env_context may now contain a DPDK-specific
string that will be appended directly into rte_eal_init().
It can be used to e.g. override the default EAL loglevel,
which was hardcoded to RTE_LOG_NOTICE so far.
This is primarily meant to be used during development.
As a test for this feature, the vtophys test app will now
set the highest possible EAL loglevel which will give us
a ton of additional debug logs.
Note: the opts->env_context field is implementation-specific
and hence the vtophys app needs to check if it's run with
our env_dpdk. As SPDK_CONFIG_ENV is a raw text not even
surrounded with quotation marks, the vtophys app needs to
do a bit of #define magic to make it a string.
Change-Id: I0b2196770e5b59a6c33d0170337c34f9f8b8466e
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/445111
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When we were trying to push a newly allocated string
into the arg array and the array realloc() failed,
the string we were about to insert was leaked.
Change-Id: I31ccd5a09956d5407b2938792ecc9b482b2419d1
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/445149
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch expose backend's bdev's PI setting to the corresponding
NVMe-oF Initiator by Ideintify command, and removes the check if
block size is 512 multiple.
These change enables NVMe-oF Initiator to send extended LBA payload.
Change-Id: Ia7aa8332d36f056872a515b6da90c83112edb909
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/445056
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Move req->submit_tick assignments from specific transports to generic
qpair code.
Check whether submit_tick has been assigned before doing the actual
assignment, because a request may be submitted several times and the
original submit_tick shouldn't be covered.
Change-Id: I2de8018dc21763eb5a19bb9d48dfbdef764b036e
Signed-off-by: lorneli <lorneli@163.com>
Reviewed-on: https://review.gerrithub.io/c/444702
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In iSCSI, SPDK_ISCSI_MAX_SEND_DATA_SEGMENT_LENGTH was an alias
of SPDK_BDEV_LARGE_BUF_MAX_SIZE.
iSCSI had used both interchangeably.
SPDK_BDEV_LARGE_BUF_MAX_SIZE means the buffer size of the large
buffer pool in generic bdev layer, and will be changed to be
configurable.
SPDK_ISCSI_MAX_SEND_DATA_SEGMENT_LENGTH had been used to negotiate
MaxRecvDataSegmentLength with iSCSI initiator and to split large
read data, but both are determined by not iSCSI target but generic
bdev layer.
Hence this patch replaces SPDK_ISCSI_MAX_SEND_DATA_SEGMENT_LENGTH
by SPDK_BDEV_LARGE_BUF_MAX_SIZE.
Change-Id: I822a5203a5092fe8b2d1ca3f93423f1acbfc782e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444539
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This macro constant is not related with data size and should be moved
to the separate location.
Change-Id: I73b337f5750c39d1f87591c2e372664019e50b95
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444545
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
If the current recv_state of qpair is same with the state to be set,
we will print error message. And checked the current code,
we should add a check to avoid this.
Change-Id: I49334f637c48e565e785d1fe6d0f000e18b2048a
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/445653
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a memory barrier for arm64 to prevent possible reordering
of tracker and cpl access,
because arm64 has less strict memory ordering behavior than x86.
Change-Id: I0a8716f7bfeffb0bbce27ee3174e214c8e4566b4
Signed-off-by: heyang <heyang18@huawei.com>
Reviewed-on: https://review.gerrithub.io/c/442964
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If users didn't set the "HotplugPollRate" field, the value
will be set to NVME_HOTPLUG_POLL_PERIOD_MAX, which isn't
aligned with our design purpose.
Change-Id: I9795d7a16a1cc44ed4de7c40f376c563d977b455
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/445077
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Purpose: solve the coredump issue for the buffer
return later in spdk_nvmf_tcp_request_free_buffers.
If keep this statement, we cannot return the buffer
to the polling group.
Change-Id: Ib5c95ba54b37540950e654110fe6317cab507076
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/445435
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Purpose: to make the timeout work for NVMe TCP transport,
we miss this for TCP transport.
Change-Id: Iab4af988cc4796b4d6d98430453f3dbce1fcf313
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/445117
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch refactors driver init and in doing so eliminates the mem
leak described in the GitHub issue. Also it is now consistent with
how the pending compression driver does init.
Fixes#633
Change-Id: Ia2d55d9e98fb9470ff8f9b34aeb4ee9f3d0478f5
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442896
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We should not add addtional check since we already have this
option in timeout_cb function, the addtional check is unnecessary.
Change-Id: I77c89303155e0c14072a1838994f9e76a0ffc0f4
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/445319
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch is used to implement this function.
Since we need to call nvme_tcp_req_complete in this
function, so we need to adjust the location of the
nvme_tcp_rep_complete funtion.
Change-Id: I5fc3693aec8dc166ac1eb03babcd2d73d7b00e63
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/444489
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
In this patch series, spdk_bdev_scsi_read and spdk_bdev_scsi_write
became almost identical. Hence squash them into spdk_bdev_scsi_read_write.
Change-Id: Ibbaddf74c1bf2dac37a0133eac27086af650a061
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444780
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This is in a effort to consolidate SCSI read and write I/O
for the upcoming transparent DIF support.
Previously conversion of bytes and blocks are done both in
SCSI layer and BDEV layer. After the patch series, conversion is
consolidated into SCSI layer.
Change-Id: Ib964a41ec22757f2a09cea22f398903f78d0781f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444779
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This is in a effort to consolidate SCSI read and write I/O
for the upcoming transparent DIF support.
Previously conversion of bytes and blocks are done both in
SCSI layer and BDEV layer. After the patch series, conversion is
consolidated into SCSI layer.
About conversion from bytes to blocks, we don't expose bdev API
spdk_bdev_bytes_to_blocks and but create private helper function
_bytes_to_blocks because we will use not block size but data
block size when we support transparent DIF feature.
Change-Id: I37169c673479c92e027e2507a0e54a1e414b43e1
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444778
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The last parameter xfer_len of spdk_bdev_scsi_read is not used,
and of spdk_bdev_scsi_write is used only to check task->transfer_len.
Hence remove the last parameter xfer_len from spdk_bdev_scsi_read/write
and extract the check operation from spdk_bdev_scsi_write and insert
it into spdk_bdev_scsi_read_write.
Additionally, remove a debug log because xfer_len is not passed to
spdk_bdev_scsi_write anymore. Hopufully, this will not degrade any
maintainability.
On top of this, factoring out the operation to convert byte to
block in spdk_bdev_scsi_read/write be done.
Change-Id: I35faca269a9c4a7f15d27e8e61b6a1b809a36b3f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444776
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
