Currently this should be a no-op as the log_page is always freed in
discovery_remove_controllers(), but it'll make it easier to handle cases
when we want to stop the discovery service while it's attaching NVM
controllers. We'll be relying on this in the subsequent patch adding
attach timeout to start_discovery().
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ia03fde92bf5ae5590bca507b7a0f963885d85f4f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12721
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
By default, failback to the preferred I/O path is done automatically
if it is restored. Some users may want to keep using the backup I/O
path even if the preferred I/O path is restored. In this case,
bdev_nvme_set_preferred_path can be used to do manual failback.
We may be able to clear/fill I/O path cache more strictly but it will
be complicated and have bugs. This patch does the minimal change,
just skips an apparent case.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I78fe5faee6ff04e88ae3d7c6be6da1c20637c912
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12431
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Using stop_discovery() will also free the entry contexts tied to that
discovery service. It's not a big deal to leave them, as module_fini is
usually called on app shutdown, but this gets rid of asan reporting
memory leaks.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I81fc843708694791a5846c24cbde4b32e0fa7287
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12683
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
It was never freed, so we leaked it.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I9e17d043ebd0d8d11bb776cb2676ac7f53f8ee41
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12682
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
For now, it's only called from a single location,
bdev_nvme_stop_discovery, but it'll make it possible to stop the
discovery from other places.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I3ba447f30fd8ed23c392d008b3d03cdad30cdb33
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12681
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
If the trid is not zeroed out, trid.trstring might contain garbage
value, which means that nvme_probe_internal() might not populate it
based on trtype and will use that garbage value to get a transport,
leading to the following failure:
```
nvme.c: 834:nvme_probe_internal: *ERROR*: NVMe trtype 3 () not available
```
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I56bc6502d285ee5ce094184e00d3297f6332e8c0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12680
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Moved assigning ctx->start_cb_fn before it's checked for NULL to set
ctx->wait_for_attach, otherwise it was always false.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I819d9e326dbb36f943279c3714695ae604dd64b2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12628
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Check that we're not already connected to a discovery service that has
the same address (or has a referall to) as the service we're trying to
start.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I84863fd959f62b30e9a348f69d10c7f1edffda7a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12627
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Otherwise, we'll try to use the same name to create the bdevs.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I38cfb9073f343a7bf3966754008065c7ab89e609
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12626
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Replaced the TODO comment with an error handing in case SPDK fails to
allocate memory for the IO request. Returning the proper error code
will use the bdev's no memory retry mechanism to handle the failure.
Signed-off-by: Gal Hammer <gal.hammer@huawei.com>
Signed-off-by: Shai Fultheim <shai.fultheim@huawei.com>
Change-Id: I151668f26b7f122dca95eaf65934be675e601952
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12372
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Rafal Stefanowski <rafal.stefanowski@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The new blobstore ext API is used when the user
provides ext_io_opts in bdev layer.
To store blobstore ext_io_opts, vbdev_lvol reports
non-zero get_ctx_size in bdev module interface.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I64076b5369533be0c1d69ca48aef9d70a9abe488
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11373
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Queued vectored IOs use extended API -
if ext_opts is NULL there is no difference
between regular and extended blob API
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I091f36d81dab04bcd483ea61e667a368441d70e4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11372
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Introduce spdk_blob_ext_io_opts structure which
is used in the new *_ext functions.
Zeroes dev is updated with implementation of
readv_ext which uses memory domains memzero
or regular memset().
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Id94542196eff999827bf00591fd43804256fccb4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11369
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
The following patches will swap the ordering of destroying I/O qpairs
and disconnecting a controller for PCIe transport to fix a github issue.
Setting callback and calling spdk_nvme_ctrlr_disconnect() have been
executed in two cases now.
After the following patches, these will be executed in three cases.
Factoring out these into a helper function will be rewarded.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I8597908d7fd8acc6dc62ec442ba2e8c4c08f11a4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12562
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The following patches will swap the ordering of destroying I/O qpairs
and disconnecting a controller for PCIe transport to fix a github issue.
For PCIe transport, destroying I/O qpairs will be as the completion
callback to controller disconnection. To do this easier, factor out
destroying I/O qpairs into a helper function.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I96bb6d0487fc67b71c759ee64200bd7fb71aceb1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12561
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The RPC returns a list of active discovery service connections. Each
discovery service is described by a name, its trid, and a list of
discovery service trids it refers to.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ifa4b9501dd353e7b4948ad830575a6c94dafd86b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12380
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We enable multiple engines by:
* getting rid of the globals that point to the one available HW
and one available SW engine
* adding a submit_tasks() entry point for the SW engine so that
it is treated like any other engine allowing us to just call
submit_tasks() to the assigned engine for the opcode instead of
checking what is supported
* changing the definition of engine capabilities from
"HW accelerated" to simply "supported"
* during init, use a global (g_engines_opc) that contains engines
and is indexed by opcode so we know what the best engine is for each
op code
* future patches will add RPC's to override engine priorities or
specifically assign an opcode(s) to an engine.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I9b9f3d5a2e499124aa7ccf71f0da83c8ee3dd9f9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11870
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
The NVMe bdev module supported active-passive policy for multipath mode
first. By this patch, the NVMe bdev module supports active-active policy
for multipath node next. Following the Linux kernel native NVMe multipath,
the NVMe bdev module supports round robin algorithm for active-active
policy.
The multipath policy, active-passive or active-active, is managed per
nvme_bdev. The multipath policy is copied to all corresponding
nvme_bdev_channels.
Different from active-passive, active-active caches even non_optimized
path to provide load balance across multiple paths.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ie18b24db60d3da1ce2f83725b6cd3079f628f95b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12001
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
If we specify a preferred path manually for each NVMe bdev, we will
be able to realize a simple static load balancing and make the failover
more controllable in the multipath mode.
The idea is to move I/O path to the NVMe-oF controller to the head of
the list and then clear the I/O path cache for each NVMe bdev channel.
We can set the I/O path to the I/O path cache directly but it must be
conditional and make the code very complex. Hence, let find_io_path() do
that.
However, a NVMe bdev channel may be acquired after setting the preferred
path. To cover such case, sort the nvme_ns list of the NVMe bdev too.
This feature supports only multipath mode. The NVMe bdev module supports
failover mode too. However, to support the latter, the new RPC needs to
have trid as parameters and the code and the usage will be come very
complex. Add a note for such limitation.
To verify one by one exactly, add unit test.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ia51c74f530d6d7dc1f73d5b65f854967363e76b0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12262
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: <tanl12@chinatelecom.cn>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
ACWU and NACWU are 0-based values. But spdk_bdev_get_acwu()
specifies the compare-and-write-unit in terms of blocks
(i.e. 1-based). So the bdev/nvme module needs to add 1
to this value before registering the bdev.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7c19975a2bd8c09bb65374838fe20aad690d1ecf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12384
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
When sending a fused compare and write command, we pass a callback
bdev_nvme_comparev_and_writev_done that we expect to be called twice
before marking the io as completed. In order to detect if a call to
bdev_nvme_comparev_and_writev_done is the first or the second one, we
currently rely on the opcode in cdw0. However, cdw0 may be set to 0,
especially when aborting the command. This may cause use-after-free
issues and this may call the user callbacks twice instead of once.
Use a bit in the nvme_bdev_io instead to keep track of the number of
calls to bdev_nvme_comparev_and_writev_done.
Signed-off-by: Alex Michon <amichon@kalrayinc.com>
Change-Id: I0474329e87648e44b08998d0552b2a9dd5d34ac2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12180
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add an new RPC bdev_nvme_get_io_paths to query all active I/O paths.
One io_path belongs to One nvme_bdev_channel.
Each nvme_bdev_channel is associated with one nvme_bdev.
If the RPC bdev_nvme_get_io_paths has a bdev name as a parameter
it can use spdk_for_each_channel() simply for the corresponding
nvme_bdev.
However, users will want to know I/O paths of all nvme_bdevs like
the RPC bdev_get_bdevs.
One io_path has one nvme_qpair. One nvme_qpair belongs to one
nvme_poll_group. By relying on these relationships, the RPC
bdev_nvme_get_io_paths traverses all nvme_poll_groups by using
spdk_for_each_channel() to g_bdev_nvme_ctrlrs.
The RPC bdev_nvme_get_io_paths has two modes, display all or
the specified NVMe bdev's active I/O paths.
The specified bdev name is used just for comparison and empty
array is returned if no matched io_path is found.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I4a0dbf3ef7aaa9a7b7345fc03dc493cc6d37bc99
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12146
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
NVMe bdev name already includes the name of the NVMe bdev controller and
the NSID. CNTLID will be a good ID to identify a namespace from a NVMe
bdev when multipath is configured. However, the query RPCs,
bdev_get_bdevs and bdev_nvme_get_controllers had not returned such
information.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I2f2e355ff13f69ced616be803a3152c838cdc980
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12276
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Previously, if a namespace is in ANA inaccessible state, I/O had been
queued infinitely. Fix this issue according to the NVMe spec.
Add a temporary poller anatt_timer and a flag ana_transition_timedout for
each nvme_ns.
Start anatt_timer if the nvme_ns enters ANA transition. If anatt_timer
is expired, set ana_transition_timedout to true. Cancel anatt_timer or
clear ana_transition_timedout if the nvme_ns exits ANA transition.
nvme_io_path_become_available() returns false if ana_transition_timedout
is true.
Add unit test case to verify these addition.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ic76933242046b3e8e553de88221b943ad097c91c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12194
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
g_kernel_mode is a bool everywhere it is used but was written as a U32
in write_config_json routine.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I16b68b88a259df0d8240b64464729bd4a0ef84ec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12275
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <wayne.gao@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We may fail creating qpair when adding io_path while creating a bdev_channel
if connection is down. But if we enable I/O error recovery, we can retry
creating qpair later.
So let nvme_qpair_create() succeed if the ctrlr is being reset or
I/O error recovery is enabled even if creating qpair failed.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I7d4ff036187bb79ada258cfc299582b4d287018b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12288
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: <tanl12@chinatelecom.cn>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Previously, only if admin qpair gets error, bdev_nvme_failover() was
called.
However, I/O qpair may get error earlier than admin qpair. In this case,
bdev_nvme_failover() was called but reset was already in progress. So
bdev_nvme_failover() returned without doing anything.
bdev_nvme_reset_complete() executes bdev_nvme_failover() if reset
failed. However the test time of test/nvmf/host/failover.sh was very
short. Timeout came before trying bdev_nvme_failover().
We can replace other bdev_nvme_reset() calls by bdev_nvme_failover()
but this patch focuses on the critical case.
Fixes issue #2128.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I68f54bbf54f92343aa56ae41f2b4cd92421c4bbb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12295
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Due to the same reason as transport_ack_timeout for
RDMA transport, TCP transport also needs ack timeout.
This timeout in msec will make TCP socket to wait for
ack util closes connection.
Signed-off-by: zhangduan <zhangd28@chinatelecom.cn>
Change-Id: I81c0089ac0d4afe4afdd2f2c7e5bff1790f59199
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12214
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In support of upcoming patches and to greatly simplify things,
the capabilites enum which held bit positions for each opcode
has been removed. Only the opcodes enum remains and thus only
opcodes are used throughout. For the capabiltiies bitmap a helper
function is added to convert from opcode to bit position. Right
now it is used in the IO path but in upcoming patches that goes away
and the conversion is only done at init time.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ic4ad15b9f24ad3675a7bba4831f4e81de9b7bc70
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11949
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The raid bdev may receive IO requests after the raid layer
invokes spdk_bdev_unregister function. This patch moves the
raid_bdev->module->stop to the raid_bdev_destruct function.
Then there will be no IO after the raid_bdev->module->stop
is invoked.
Below is a way to reproduce this issue:
(1) create a malloc bdev
sudo ./scripts/rpc.py bdev_malloc_create --name malloc0 128 4096
(2) create a concat bdev base on the malloc bdev
sudo ./scripts/rpc.py bdev_raid_create --name concat0 \
--raid-level concat --base-bdevs malloc0 --strip-size-kb 4
(3) create a lvstore base on the concat bdev
sudo ./scripts/rpc.py bdev_lvol_create_lvstore \
--cluster-sz 4194304 --clear-method unmap concat0 lvs0
(4) remove the concat bdev
sudo ./scripts/rpc.py bdev_raid_delete concat0
In the step(4), the spdk app will crash because an IO request
is sent to the concat bdev after the concat_stop is invoked.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: I76d6964ee9528d4590ed86e9c5c28d53e85da32f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12221
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This was neither set nor used.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I3119135843c5fc0b8724e593db40df46e6b5bdb0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12097
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The concat module can combine multiple underlying bdevs to a single
bdev. It is a special raid level. You can add a new bdev to the end of
the concat bdev, then the concat bdev size is increased, and it won't
change the layout of the exist data. This is the major difference
between concat and raid0. If you add a new underling device to raid0,
the whole data layout will be changed. So the concat bdev is extentable.
Change-Id: Ibbeeaf0606ff79b595320c597a5605ab9e4e13c4
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11070
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
vbdev_gpt reports memory domains of its base
bdev if the base bdev is not configured to check
DIF refence tag since in that case bdev_part will
remap reftags thereby it will touch metadata.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ie1fee7f267c318b3cede47fbbbe9f7639571bdeb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11050
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Use spdk_bdev_readv/writev_block_ext even when
there is no ext opts passed by bdev layer
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I0b9f17150cdba1a1023478bae745ab4438ea99bb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10070
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
That is a preparation for support of memory domains
in bdev_raid
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I3a6e01eccd4d7e4bc197dc5ffe268d42081d41de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11429
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Use spdk_bdev_open_ext() + spdk_bdev_desc_get_bdev() +
spdk_bdev_close() instead of spdk_bdev_get_by_name().
Additionally, use bdev pointer instead of &fdisk->disk because it is
more readable.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I924595268e6785592a6e777e90a8c245a0346719
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12070
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_bdev_get_by_name() uses RB tree and is fast. However it is not
secure from race condition. We can use spdk_bdev_open_ext() instead
but what we want to get is not spdk_bdev but vbdev_delay.
vbdev_delay is managed by the g_delay_nodes list.
The g_delay_nodes includes only vbdev_delay. Even if its performance
is O(N), it is more intutive, more secure, and small list.
So replace spdk_bdev_get_by_name() by simple list traversal.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I3e184066e237e10132523591133900231055b5af
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12069
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Replace spdk_bdev_get_by_name() + spdk_bdev_unregister() by
spdk_bdev_unregister_by_name() wherever possible.
This simplifies the code and makes the code more reliable.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I91388c9d0b2e244cb745720a480803b03c42a226
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12066
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For deletion RPCs, a boolean false response had been sent rather than
a error response when they failed. However, boolean false resonse had
caused false negative, that is, test code had regarded as success by
mistake. For example, the following test code regards as success if
JSON RPC returns a boolean false response.
if $rpc_py bdev_pmem_delete $pmem_bdev_name; then
error "bdev_pmem_delete deleted pmem bdev for second time!"
fi
This patch fixes such false negative issue by explicitly returning a
error response if deletion RPCs fail.
Only the bdev_virtio_detach_controller RPC has implemented this.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I5409a070cbd2364dbb63b42421b032534c6f9a0b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12077
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
The process of matching qpair to poll group is split into
two distinct parts that occur on different threads.
See spdk_nvmf_tgt_new_qpair().
This results in a race condition for TCP between spdk_sock_map_lookup()
and spdk_sock_map_insert(), which are called in spdk_nvmf_get_optimal_poll_group()
and spdk_nvmf_poll_group_add() respectively.
Fixes#2113
This patch picks a hint from nvmf_tcp for next poll group,
which is then passed down to spdk_sock_map_lookup().
When matching placement_id exists, but does not have
a poll group assigned - the hint will be used.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I4abde2bc9c39225c9f5dd7c3654fa2639bb0a27f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10271
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Setting this optional parameter to true makes the
RPC completion wait until the attach for all
discovered NVM subsystems have completed.
This is especially useful for fio or bdevperf, to
ensure that all of the namespaces are actually
available before testing.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icf04a122052f72e263a26b3c7582c81eac32a487
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12044
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Sendmsg_idx is used in _sock_check_zcopy to check whether idx in
MSG_ERRQUEUE and req's idx match. There is no need to update
it if zerocopy is disabled.
Change-Id: I24bb367e0bff006782d9052470857f6e4db90681
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12104
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We try avoiding write a closed socket by checking if the return value
of recv() is zero. However it is not possible to completely avoid writing
a socket which is already closed by the target.
Repeatedly adding/removing listener in the NVMe-oF TCP target caused
SIGPIPE to the NVMe-oF initiator.
Fix the issue by adding MSG_NOSIGINAL to the flag of sendmsg().
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I273679c91c4b867792e966b1dc2121f6d2188f16
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12119
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The function returns -ENOBUFS when handling OCF_WRITE_FLUSH requests
on a disk with a size which its lower 32-bits are zeros. Zeroing the
request buffer length occurs when creating a new ocf_io and assigning
a 64-bit value to a 32-bit value in vbdev_ocf.c:io_handle.
This patch fixes the condition to check if the request have a payload
(data->iovs) before checking for the size limitation.
Signed-off-by: Gal Hammer <gal.hammer@huawei.com>
Signed-off-by: Shai Fultheim <shai.fultheim@huawei.com>
Change-Id: I2c6d03fee32a8fbed7beffdac6fef6a478ea4211
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10896
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Rafal Stefanowski <rafal.stefanowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
After the change that the NVMe bdev module disconnects qpair asynchronously,
disconnected_qpair_cb() got NOTICELOG always when a qpair was disconnected
and freed. This was very noisy.
We have three cases that disconnected_qpair_cb() is called now, 1) qpair
was destroyed in a full ctrlr reset sequence, 2) the upper layer closed
I/O channel, and 3) qpair detected error, and was disconnected and freed.
Get NOTICELOG for 3) but get DEBUGLOG for 1) and 2) with some rewording.
Additionally, to improve readability, change if-else ordering.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ib63bcfd4b72a82a13d3cda208c71cdb40a42fd6b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12085
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We want to be able to save the discovery configuration
in a generated JSON-RPC file.
The obvious change needed here is to add a
bdev_nvme_start_discovery RPC to the config file
for each discovery context.
But we also need to make sure we do not emit
bdev_nvme_attach_controller RPCs for controllers
that were attached via the discovery service. These
controllers will be attached by the discovery service
instead - or maybe not at all if the discovery
log page returns different results.
Do both of these changes here, since they are
somewhat tied to each other.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic2072150c3efdd0a8d01da09e33a647e4929779b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11818
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The only rc that we may get in _comp_bdev_io_submit func
is ENOTSUP. ENOMEM is not available since submission funcs
are void.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I8980644a02889c5e64a2b9b1382dff6d8a7ffa9b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11974
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
With recent changes libreduce should provide correct buffers
if the driver doesn't support SGL in/out. This patch verifies
that we don't use SGLs when they are not supported.
Since even a single buffer can be split on 2MB page
boundary, it is not enough just to check iovs count.
Added asserts that the first elements of mbufs are
not null to avoid scan build errors
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I620e43bf5b1abd25cab412fe08346a6d767c9be9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11973
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
rte_pktmbuf_free frees the given mbuf and any chained mbufs.
It can cause double free of some mbuf if we free every mbuf
in a loop. Instead use rte_pktmbuf_free_bulk which correctly release
chained mbufs.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I55fd7832ff656f519a4ed2f02de8ef1a0f637a02
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11972
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In case of any error (except of device one) the compression
operation is queued for further resubmission. However in some
cases (e.g. mbufs config error or compress driver error) this
resubmission doesn't have any sense since we'll hit the same
problem later. This patch enqueues operations when there were
no mbufs or comp_operation descriptors or the compress operation
was not processed.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I1e0eab5e4ea80f84d969814a916b6cd783a77fe1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11971
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When configuring multipath, if the first controller did not have
namespace#0 but the second controller had namespace#0, prchk_flags
was not set as expected because we could set prchk only for the first
controller.
This patch fixes the bug by copying prchk_flags from the first
controller to the following controllers.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ib866fc88bfdf981d1e89ef5a863f50ff41f4e159
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12050
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This clean up makes the following patches a little easier.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I0415de9b99567b4de1ad7b35298ea51a664d4a32
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12049
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This keeps track if an nvme_ctrlr was created
implicitly by the discovery service.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I493b7cacfe563737f45a1fffca98855a1929a751
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11817
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
These parameters will be used for any controller created
by the discovery service.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I221b791f38b9c5797ba084c647a98b82c102a121
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11942
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Attempt to start a connection once per second, but
after a connection is successfully started, change
the timer period to one millisecond instead.
This ensures lower response time to AER events when
the discovery controller is operational, but then
decreasing rate of unsuccessful connect attempts (and
associated log messages) if/when a discovery controller
fails.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie24036303f5b00f4a42b6575656f401ea4d578f2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11774
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Also cycle through the discovery paths if the initial
connect_async() operation fails.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I50f36949d9bba0e3bff81505712076f1a1a7aad5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11773
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
If a discovery controller fails at some point, we
will want to detach it. This can happen separately
from detaching the controller because we are stopping
the discovery service. So break out the ctrlr
detach operation into a separate phase of the
discovery_poller.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia601b767d32bda1c8899d3a95029781c0aeee136
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11772
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
It's already done in ioat_destroy_cb(). Proper fix required moving
the rest of the cleanup code in accel_engine_ioat_exit() to a new
device unregister callback.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Iaaa595cf5b51f7a4842315fc06270b0857ebf0c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11930
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Fill is sent in as a uint8, we need to populate the full uint64
input with the uint8 pattern or we'll get a miscompare. This is
how idxd was doing it, instead of adding the same code to ioat just
move it up a layer.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia4aab1c6230f35ab88bb8a0e3b8e16dbd93007c7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11947
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Some compress drivers may not support SGL for in or
out buffers. Extend spdk_reduce_backing_dev with two
flags that will be used by reduce library to correctly
build iovs
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Icee9383364124888c2109894c959c06710d91250
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11968
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
- More user-friendly style of error and debug messages.
- Remove "ERROR" word from SPDK_ERRLOG() to avoid duplicating
in the log.
Signed-off-by: Yuriy Umanets <yumanets@nvidia.com>
Change-Id: Iaee068f96e66f567fc23b34ae0ae6221c1bd710c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11632
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
- Fixed duplication of key, key2, drv_name, cipher, etc., fields in
struct bdev_names and struct vbdev_crypto. Moved all of them into
the new struct vbdev_crypto_opts, which is re-used by both structs.
This aslo removes duplication in error handling and fininalization
logic that checks the keys are zeroed out and properly freed.
- Moved unhexlify into vbdev rpc code. All keys passed to vbdev
already in the binary form.
- Provide meaningful error messages in the rpc response on keys
validation issues during setup of crypto vbdev.
- Updated unit tests.
Signed-off-by: Yuriy Umanets <yumanets@nvidia.com>
Change-Id: I1fab8771bbbc0cd2f359f0d105fec28fb86893b3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11631
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
- Added hexlify() and unhexlify() for key and key2. This is required
for keys that contain zero and non-ascii characters. Since binary
keys may contain zero character, strlen(key) cannot be used and
key_size and key2_size are used instead. Non-asci chars are not
allowed in json and using hexlified keys fixes this issue as well.
- Updated documentation to clearly state that hexlified keys must
be used.
- Updated test scripts.
Signed-off-by: Yuriy Umanets <yumanets@nvidia.com>
Change-Id: I3fce7839f7eaa67d0307071eba80b4cea472d731
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11891
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Bdev modules must not access internal bdev_io
structure, so add a new pointer in a public
section. Pointer in internal section will be
used in next patch
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ib631563015b3e5fa9300d22b7ae59d8db43c8275
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10421
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK has settled on what the optimal DSA configuration is, so let's
always use it.
Change-Id: I24b9b717709d553789285198b1aa391f4d7f0445
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11532
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Detach and stop are two different operations. This
->detach field was used to denote when the associated
discovery service should be stopped. So call the field
'stop' instead. That may trigger the currently
attached discovery controller to be detached.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I61c7fc860cd9dbcfab71eedfd223c06c51a41f27
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11771
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
We will now keep a list of the possible paths to
the discovery subsystem. One of them will be the
path we are currently connected to (which at service
start, is the path specified by the user).
Additional entries are added for discovery log page
entries referencing the discovery subsystem.
When the discovery service starts, we just have the
initial entry in the list - the discovery poller
tries to connect to it, and if the connect starts
successfully, removes it from the list and points
ctx->entry_ctx_in_use to it.
This will be useful later when we want to iterate
through the available paths to the discovery
subsystem if the current path fails.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5b18e0f20c4607e29ac0f12f27ba7eb169d0206d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11770
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
This reduces some code duplication since the same
function will be reused in an upcoming patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id6764171ff93c95de49792a4488f2c205b8eddb6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11769
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
We used to wait until the discovery service could
connect to the discovery subsystem before calling
the callback function provided by the caller (mainly
the start_discovery RPC).
Moving forward, we will be handling the case where
the discovery subsystem is unavailable temporarily.
For now, let's not fail the bdev_nvme_start_discovery
call if we cannot connect to the discovery subsystem.
This will keep the initial service start path the same
as the path where the discovery subsystem is temporarily
unavailable. In the future, we can consider adding
functionality to the start_discovery RPC that waits
up to X number of seconds to see if we were able to
connect and fail otherwise.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icb05523b9d59f508bfbc0233595c8bf58c10488f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11768
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
For RDMA transport, adminq will find transport error first because
usually only adminq polls CM events.
Change-Id: I7b22cc8883bf02198f1a90d2654c1de6f2e736e6
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11331
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is a preparation to the following patches.
Change-Id: I1bb0052c745d4f83ff621e4110907a8ac1f1d597
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11330
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If qpair is disconnected asynchronously, it takes time from detecting
transport error to actually disconnected. We should avoid using the
path as soon as possible after detecting any transport error.
Poll group clears I/O path cache if it finds transport error and avoid
using the path which had transport error.
These changes will reduce the failover time.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I00580159a84372a115ed5e62a6ce13eed4368999
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11329
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_nvme_ctrlr_disconnect() will be made asynchronous in the
following patches and so we will need to have some changes.
spdk_nvme_ctrlr_disconnect() disconnects adminq and ctrlr synchronously
now.
If spdk_nvme_ctrlr_disconnect() is made asynchronous,
spdk_nvme_ctrlr_process_admin_completions() will complete to disconnect
adminq and ctrlr, and will return -ENXIO only if adminq is disconnected.
However even now spdk_nvme_ctrlr_process_admin_completions() returns
-ENXIO if adminq is disconnected.
So as a preparation, set a callback before calling spdk_nvme_ctrlr_disconnect()
and call the callback if it is set and spdk_nvme_ctrlr_process_admin_completions()
returns -ENXIO.
Besides, fix the return value of bdev_nvme_poll_adminq() in this patch.
Change-Id: I2559f86bb8cf9a92b5b386ed816c00b08c9832df
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10950
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
As we do when deleting ctrlr_channel, disconnect and then free I/O
qpair in a ctrlr reset sequence.
Deleting ctrlr_channel and resetting ctrlr_channel may cause conflicts.
This patch processes such conflicts correctly.
If destroy_ctrlr_channel_cb() is executed between pending and executing
reset_destroy_qpair(), reset_destroy_qpair() is not executed because
ctrlr_channel is not found. In this case, destroy_qpair_channel()
starts disconnecting qpair and deletes ctrlr_channel. Then
disconnected_qpair_cb() releases a reference to poll group.
If destroy_ctrlr_channel_cb() is excuted between executing reset_destroy_qpair()
and disconnected_qpair_cb(), destroy_ctrlr_channel_cb() skips
ctrlr_channel for a reset sequence.
Change-Id: I1f49f74b94aefbea178680aa53ded3a12876c676
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10766
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
At the moment MLX5 uses different number of qp descriptors than the
other pmd crypto drivers. Adding it to vbdev_crypto on init and re-use
everywhere we need it.
Signed-off-by: Yuriy Umanets <yumanets@nvidia.com>
Change-Id: Iea4d4787fc5fd91f27c4a70cf78c5660f09bc854
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11878
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Even released memory contains key and key2 until it is re-allocated
for other purposes. Zero out key and key2 when not longer needed.
Signed-off-by: Yuriy Umanets <yumanets@nvidia.com>
Change-Id: If80f3faeb98b5b5acab7f2f857f284909247d1ac
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11877
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Since IV length is the same for all pmd crypto drivers,
AES_CBC_IV_LENGTH is renamed to IV_LENGTH.
Signed-off-by: Yuriy Umanets <yumanets@nvidia.com>
Change-Id: If8769db119eb599a17c267e8950f18f5a0ea995b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11875
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When connection is disconnected, bdev_nvme will call
bdev_nvme_failover, and then reset the controller.
nvme_ctrlr->reset_start_tsc should be updated in function
bdev_nvme_failover, then bdev_nvme_check_xxx_timeout can
work well.
Change-Id: I99b639545e9dd4082cdc14696bb7872cb4917b1d
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11957
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Creates a JSON on scheduler side to return after .get_opts is called
and parses a JSON on .set_opts call.
The JSON passed to dynamic scheduler on .set_stats is a copy of a
pointer already available during RPC framework_set_scheduler call.
Getting and setting scheduler stats via RPC calls is going to be
implemented in the next patch in this series.
Change-Id: I62880a71066a140c74336a5725e7b10952008e5c
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11448
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
For RDMA transport, current synchronous qpair disconnect occupied CPU for
a second when qpair disconnect gets timeout.
To remove this limitation, we will do the following:
- make spdk_nvme_ctrlr_disconnect_io_qpair() asynchronous,
- spdk_nvme_qpair_process_completions() returns -ENXIO only if the
qpair is actually disconnected.
Even at this patch, spdk_nvme_poll_group_process_completions() invokes
disconnected_qpair_cb only if a qpair is actually disconnected. This
behavior will be maintained.
To use the upcoming asynchronous qpair disconnect easily, when
deleting a ctrlr_channel, disconnect the qpair, and then free the qpair
and release a reference to the poll group when the qpair is actually
disconnected.
We need to delete a nvme_qpair asynchronously after the corresponding
nvme_ctrlr_channel is deleted and defer the deletion of the corresponding
nvme_ctrlr until the nvme_qpair is deleted. To satisfy this requirement,
utilize the reference count of the nvme_ctrlr.
disconnected_qpair_cb() may call spdk_nvme_ctrlr_free_io_qpair() and
spdk_io_device_unregister() successively. The spdk_io_device_unregister()
will execute spdk_nvme_detach_async() from its callback.
spdk_nvme_ctrlr_free_io_qpair() has to complete earlier than
spdk_nvme_detach_async() starts. spdk_nvme_ctrlr_free_io_qpair() is
executed after unwinding stack. spdk_nvme_detach_async() is executed
after sending a message. Sending message is later than unwinding stack.
Hence the requirement is satisfied naturally.
spdk_io_device_unregister() for the nvme_ctrlr is required to be called
on the nvme_ctrlr->thread. To satisfy this requirement, redirect
nvme_ctrlr_unregister() to the nvme_ctrlr->thread. This change is too
small to stand as an independent patch. So include the change in this
patch.
Change-Id: Id8c01966c40b1dae9c4ef17f1b0b3f60a0bd17d5
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10765
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is another preparation to disconnect qpair asynchronously.
Add nvme_qpair object and move the qpair and poll_group pointers and
the io_path_list list from nvme_ctrlr_channel to nvme_qpair. nvme_qpair
is allocated dynamically when creating nvme_ctrlr_channel, and
nvme_ctrlr_channel points to nvme_qpair.
We want to keep the times of references at I/O path. Change nvme_io_path
to point nvme_qpair instead of nvme_ctrlr_channel, and add
nvme_ctrlr_channel pointer to nvme_qpair.
nvme_ctrlr_channel may be freed earlier than nvme_qpair. nvme_poll_group
lists nvme_qpair instead of nvme_ctrlr_channel and nvme_qpair has a
pointer to nvme_ctrlr.
By using the nvme_ctrlr pointer of the nvme_qpair, a helper function
nvme_ctrlr_channel_get_ctrlr() is not necessary any more. Remove it.
Change-Id: Ib3f579d3441f31b9db7d3844ec56c49e2bb53a5d
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11832
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The following patches will have the following changes.
Add nvme_qpair object and move qpair and poll_group pointers and
the io_path_list list from nvme_ctrlr_channel to nvme_qpair. nvme_qpair
is allocated dynamically when creating nvme_ctrlr_channel, and
nvme_ctrlr_channel points to nvme_qpair.
qpair is disconnected asynchronously and nvme_ctrlr_channel is
deleted asynchronously.
To make the following patches simpler, refactor two functions,
bdev_nvme_create_ctrlr_channel_cb() and
bdev_nvme_destroy_ctrlr_channel_cb(). The details are as follows.
Factor out nvme_qpair_create() from bdev_nvme_create_ctrlr_channel_cb()
and factor out nvme_qpair_delete() from
bdev_nvme_destroy_ctrlr_channel_cb(). Then reorder a few operation
in these.
Additionally, reorder a operation in _bdev_nvme_add_io_path().
Change-Id: Idf0328fa77a54f40fe52ca72c3842dde82d55972
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11831
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In the following patches, spdk_nvme_ctrlr_disconnect_io_qpair() will
be changed to be asynchronous, spdk_nvme_ctrlr_disconnect_io_qpair()
will be called first and then spdk_nvme_ctrlr_free_io_qpair() after
the qpair is actually disconnected.
We will not be able to keep the current bdev_nvme_destroy_qpair()
function.
As a preparation, inline bdev_nvme_destroy_qpair() and remove it.
Additionally, this patch has the following changes.
Previously I/O qpair was freed and then I/O path caches were cleared.
Both are SPDK thread local. So there is no dependency for the ordering
of these two operations. However, it will reduce the size of the
following patches if we clear I/O path caches before freeing I/O qpair
when the qpair is disconnected. Hence we clear I/O path caches and then
free I/O qpair.
Remove DTRACE for bdev_nvme_destroy_qpair() for now.
It will be restored in the following patches.
Furthermore, fix potential NULL pointer acces in
bdev_nvme_create_qpair().
Change-Id: I0ab78ccb0d240e56b95b53179341afcd909a31f6
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10746
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
