Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I79c2c30e15b8254c3cb75af5615dfafee84a9abd
Reviewed-on: https://review.gerrithub.io/392709
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently, each histogram range is hardcoded to
128 buckets (1ULL << 7), resulting in 58 ranges
(64 - 7 + 1) and a total size of 58 * 128 *
sizeof(uint64_t) = 59392 bytes.
To allow for more usage models in cases where this
size is prohibitive, enable the following changes:
1) specify number of buckets per range (in number of bits)
2) specify max datapoint value (in number of bits)
The latter can be useful for cases where datapoints
are never close to requiring all 64 bits - and allows
reducing the number of ranges. Any data points that
exceed the max will be tallied in the last bucket
in the last range.
Testing shows no performance disadvantage using the
dynamic approach.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5979bcdff6209faaa9dee293918ef2a78679bcd4
Reviewed-on: https://review.gerrithub.io/392707
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I050ecd4f3bbccbd527387d080ce595fae16479d3
Reviewed-on: https://review.gerrithub.io/392704
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Use spdk_bdev_unmap_blocks() in place of spdk_bdev_unmap(), since the
SCSI UNMAP descriptor already natively operates in blocks rather than
bytes.
Change-Id: I16a0c38d203cf5f60484229e7872783b11d8de6e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393202
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Use spdk_bdev_flush_blocks() in place of spdk_bdev_flush(), since the
SCSI SYNCHRONIZE CACHE command already natively operates in blocks
rather than bytes.
Change-Id: I11810948fb8d0b6b911d48620e2a363f767cc7f7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393201
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Adopt two improvements for iSCSI by Ziye to VHOST.
- iscsi/conn: remove rte_config.h header
- env: export spdk_env_get_last_core function
Change-Id: I8f067093d593c8d483c52587669f8b0b706f497f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/392910
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The latest patch for the iSCSI connection is applied to the vhost
too.
RTE_MAX_LCORE in the for loop is removed and the for loop is
replaced by SPDK_ENV_FOREACH_CORE().
When the cpumask is unexpectedly 0, not 0 but the first core is
returned.
Change-Id: I39cfc2219a3532eccc8c0ce59712102b947a76d7
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/392588
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
update help message to match reordered and new test cases
Change-Id: Id85391cfc84c1ee1567cae07da9ff797a95a6f68
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/392675
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A few previous changes replaced ALL by ANY for the initiator group
because ANY was normal for this case. ANY was tested enough for
the initiator name of the initiator group but not tested for
the netmask of the initiator group.
Hence the previous changes caused degradation.
This is the bug fix and UT code is added together.
Change-Id: Idf7642dd4c111a4788aca31a0105b3497631aecd
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/392923
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Current relative work dir path caused problems with downstream
test scripts when running spdk_vhost.sh using relative path
Change-Id: Ifd47bd37650a6328cb0f548a03cb4de010093320
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/392744
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tests need adjustments due to patch:
https://review.gerrithub.io/#/c/392587/
Change-Id: I098aca99fe22a9e01246da74b4b9fbf25f4b5b99
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/392745
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Ibd3e485085793260ca4bb2bfa3da6025b2c997aa
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/392450
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The latest change for the portal group is applied to the vhost.
The following comment is quoted from it.
Currently the cpumask must be a subset of the reactor mask.
However, this is different from sched_setaffinity() function
and taskset command of FreeBSD and Linux. The latter will
be familier for more people. Hence the later is adopted.
The following is quoted from the FreeBSD Man Page of taskset:
The CPU affinity is represented as a bitmask, with the lowest
order bit corresponding to the first logical CPU and the
highest order bit corresponding to the last logical CPU.
Not all CPUs may exist on a given system but a mask may specify
more CPUs than are present.
A retrieved mask will reflect only the bits that correspond to
CPUs physically on the system.
If an invalid mask is given (i.e., one that corresponds to no
valid CPUs on the current system) an error is returned.
The masks are typically given in hexadecimal.
Change-Id: Idcd72a12ef52e4ccec8476e7d54fab82867cf936
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/392587
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This can be used for two purposes:
1) more quickly iterate the blob list, avoiding
metadata pages that are valid but not the first
page in the blob's metadata list
2) close races between delete and open operations -
now we can clear the bit in the blobid bit array
when the delete operation is in progress, ensuring
no one else can try to open the blob
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3904648fd6fa656cb98c9e17ea763ed5a84ef537
Reviewed-on: https://review.gerrithub.io/391695
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Number of susbystems for test on physical server increased.
Due to SoftRoce limitations number of subsystems is not
increased for VM tests.
Change-Id: I6875204238f55f4bc4a819512ee0fd6a46c44fee
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/380459
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
SoftRoce does not implement enough queues
for multiconnection tests and cause test pool failures.
In case interface used for test is software
emulated - reduce number of NVMf subsystems in test.
Change-Id: I52cc78015e72603c487a5774b91c6bd4523326b0
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/392357
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Purpose: To avoid overflow, if the passed value is too
big.
Change-Id: I59d31c0baa742cab14e22dcd88a61cb5adca247a
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/392579
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was removed some time ago.
Change-Id: I5e4b588fb881793d750999ff73e8bf891cb58fc0
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/391952
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Make shell scripts prepare fio jobs and just call run_fio.py to run
those jobs. This way run_fio.py don't need to know anything about test
environment configuration.
Change-Id: I10b6954011855e9139ff7b5372070ec553009d33
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/391929
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
A couple of the lvol tests delete the nvme bdev, then construct
it again to test lvolstore tasting. But constructing the nvme
bdev and then the tasting can take a tiny bit of time, and if
we check for the lvolstore too soon, it could fail. There are
a large number of intermittent test failures in the test pool
that show this signature.
So sleep one second to allow time for the tasting to complete.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iebabe09458302d8300e704f232fdbb245b562268
Reviewed-on: https://review.gerrithub.io/392559
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I6ddce54d24570099f5237ea3acbac7e3be78e520
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/392434
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7174f1799361b8337ff5590b90ad6a0564ca8e9b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/391899
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use double-precision floating point in the performance_dump() function,
since we can be dealing with large numbers (especially now that
io_completed is now uint64_t).
This isn't part of the I/O path, just used to print statistics, so
there should be no performance impact. Also, the arguments passed to
printf() were already implicitly being promoted to double, so this
actually removes an extra conversion step.
Change-Id: I12aae36bc42e83777eaa050561eb5e55060ae81c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/392414
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
- Removing hardcoded lvol bdevs and blk controller sizes
Lvol bdevs will now be created with roughly equal size based on
size of used NVMe backend
- Create lvol structures and VMs setup independently
Change-Id: Ib1cfe1b60033200a9896fa0c8d1b17af41ea0eb1
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/390983
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In the iSCSI specification, the SCSI device name is defined to be
the iSCSI name of the node.
However, when g_spdk_iscsi.nodebase is used, the SCSI device name
is made of the device specific string (the part of IQN after the
colon).
The size of the temporary buffer fullname[MAX_TMPBUF] in
spdk_iscsi_tgt_node_construct() is 1024 and the size of
spdk_scsi_dev.name is 255. The former is larger than the later.
However the max length of IQN, EUI, NAA are 223, 20, and 36,
respectively. All are less than 255.
Hence even if we use fullname as the SCSI device name, no overflow
will occur. Even if fullname is more than 255, strncpy() does not
write more than 255 in spdk_scsi_dev_construct().
It's possible to check the length of iSCSI name strictly, but I
will do the least in this patch.
Change-Id: Icc6655fcd846797720867c10e316d2951c664030
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/390360
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reason: If test a very long time, it will overflow
when we use int
Change-Id: I729e8cb5862ab78808da5121666b41e599e1dddb
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/392122
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Iba33c55f129c60fad2d58f5254dec5c54ed56805
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Reviewed-on: https://review.gerrithub.io/388217
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It looks that initiator groups which were initialized after
being inserted to linked lists caused failures.
Change-Id: I43f4a6324e77221f0e9657667c0185b15e9c229c
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/392100
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5e19266d5d418e1b356308d2b9efa419c1b22232
Reviewed-on: https://review.gerrithub.io/392002
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
the sysfs for NVMe drives on some older versions of the linux kernel
differs slightly from the latest kernel versions. This patch adds a
fallback to support those older kernel versions.
Change-Id: I2787e0d15d310ce1f264b0a303f53e48525a9a1d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/391983
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
libiscsi will be used to test our iscsi target for spec compliance. I
check out the source from github incase we need to modify it and create
our own branch later.
Change-Id: I2d1c037e1aee47fa7f6f700ae186dd402f9ad52b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/391887
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch does the following things:
1 Set the time period 1 second into a global variable,
then if we modify that value, we will make sure that
we change it in the whole file.
2 Fix the period performance printing data . We should not pass
the time period, but we should pass time period * times, since
I/Os completed are caculated from the beginning.
Change-Id: I1eaaf1655389cbccefdcc879a51fca94028afdcb
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/391421
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
1) move iscsi_pmem to nightly
2) move idle_migration to nightly
3) reduce number of malloc bdevs and lvols for iscsi_lvol
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I63fa5a2634c6edb08db16267972fd21c20fd84f4
Reviewed-on: https://review.gerrithub.io/391976
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I138362d4ebe157926228384ab032c057c03c822e
Reviewed-on: https://review.gerrithub.io/391891
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I619f2e772b38061e26e3c5f2b4014ee73a5f5d81
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/391894
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This prepares for some future changes to blobstore
metadata. For older (pre v3) blobstore disks, we
do not want to try to write new metadata fields,
since in many/most cases, there will not be room
allocated for them.
The current code will keep the existing version -
this is just adding tests to make sure this does not
break in the future.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I866ff39972eb15b5a24fd30fa6b56d649fc06305
Reviewed-on: https://review.gerrithub.io/391507
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
I have no idea why - but scan-build starts complaining about
some missing SPDK_CU_ASSERT_FATAL checks when analyzing the
next patch - even though that patch has nothing whatsoever
to do with the scan-build error reports.
scan-build is really weird sometimes.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3d426384fa4f846abf2eb98fd29ee308d08c1943
Reviewed-on: https://review.gerrithub.io/391875
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Similar to previous change, the ** paradigm is a bit
problematic for asynchronous routines that could fail.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ife7748280482356c4c51a796817b71cd7bc7e479
Reviewed-on: https://review.gerrithub.io/391483
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Using the ** paradigm is a bit problematic for asynchronous
routines that could fail. Currently we were inconsistent in
that some error paths would zero the pointer while others
did not. So make this just a plain pointer, which simplifies
the API and its implementation.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I67147931c6e8350896a4505022a6a314655de3d3
Reviewed-on: https://review.gerrithub.io/391482
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add the unit tests for the spdk_nvme_connect() API. This API
will be called both by the primary or standalone process and
secondary process. Introduce different unit tests to cover
different usage.
Change-Id: I9ded7d08b593c5e2c541cf6faad6aff0ff2ebff9
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/380895
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
ext4test takes ~80 seconds to run, which is a significant portion of the
overall test time for machines running the iSCSI tests.
Change-Id: Id6384fe023f101d4e81bc4ed2da9a53a817d2a02
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/391317
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
While iterating, allow the user to perform asynchronous
operations. To continue iteration, the user is expected
to call spdk_for_each_channel_continue.
Change-Id: Ifd7d03d5fbf17cf13843704274b036d49ca0484a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/391309
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
With the previous 2 seconds sleep we
still used to randomly fail from time
to time.
Change-Id: I99f8c50ba4af87c47bed5a629ddb79f5eb796d4c
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/391553
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This test ran for 10 minutes, which is half of the allotted time for
the entire nightly test run.
Additionally, we should be testing each bdev backend at the component
level (e.g. via bdevio and bdevperf), rather than trying to add tests
for the whole matrix of front-end app (iscsi_tgt, nvmf_tgt, etc.) with
each bdev backend.
Change-Id: I10311e3e5092084dc939ab8662e8312066ecab6e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/391303
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also used it in parsing `-m` SPDK app param,
meaning that it can now accept numbers
followed by a binary prefix - like 512M or 2G.
Change-Id: If458dc08429237f2cb3f3f661bcaf382468df0f0
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/391670
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
As part of clarifying the API and preparing for some
future changes, rename the following functions:
spdk_bs_md_create_blob => spdk_bs_create_blob
spdk_bs_md_open_blob => spdk_bs_open_blob
spdk_bs_md_delete_blob => spdk_bs_delete_blob
spdk_bs_md_iter_first => spdk_bs_iter_first
spdk_bs_md_iter_next => spdk_bs_iter_next
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I86bf792717b68379484a6108396bb891fe1c221e
Reviewed-on: https://review.gerrithub.io/391031
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This function was a nop and is not needed.
lvol was calling this function when an lvol bdev
gets a FLUSH I/O, but that is not needed either. So
lvol will now report it does not support flush.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I92df83243f7ebce81c69040a8874891dc2ffc961
Reviewed-on: https://review.gerrithub.io/391023
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ic960f2fe6966ae6eeb027a7c6a1d6929c741080d
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/388642
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Replace the single call to spdk_scsi_dev_print() with a reimplementation
using public SCSI API functions, and also using the SPDK logging
framework instead of printf().
Change-Id: Ifa455f9e6a4a07a35d5dec311a61e9a8afaa0227
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/391320
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Then also add a check in check_format.sh and fail if
a new instance is found again.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia35c343e1b7bb44b3b5f4f8484adb9e0d5702d67
Reviewed-on: https://review.gerrithub.io/390916
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Now rely entirely on the user to create and poll
the poll groups.
Change-Id: I66baaa2d0f493390a055a32e6c902f5e2f574534
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/385954
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Enable the NBD subsystem and RPC methods in the iSCSI target, NVMe-oF
target, vhost target, and bdev_svc test app.
Change-Id: I1c2e53a4c031ae6d4dc0a8e698bbfa085db33154
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/391014
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since we use time_in_sec to judge < 0 case
Change-Id: I8283c8209359acfe1b1d5db8a9d4315e5722c5c6
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/391154
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Moving forward, the spdk_blob returned to users will
actually be an I/O channel - not the blob structure
itself. So rename the existing spdk_blob to spdk_blob_data.
spdk_blob_data will continue to contain global state for
the blob. In the future spdk_blob will point to an
I/O channel for the blob - for now it effectively still
points to the spdk_blob_data, but by changing the
structure names here it will reduce the code churn in
future patches.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7d0cbc0553f68f96c24173c833091a80d058eb89
Reviewed-on: https://review.gerrithub.io/390900
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I23f71ff38b805723d74aca639489e0079ecdb993
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/390341
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Check the SPDK_TEST_NVMF flag before running the iscsi_tgt + NVMe-oF
host test.
Change-Id: I0d545c98f188edefc089fb79e2879d5d307726f5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/391027
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Require braces around all conditional statements, e.g.:
if (cond)
statement();
becomes:
if (cond) {
statement();
}
This is the style used through most of the SPDK code, but several
exceptions crept in over time. Add the astyle option to make sure we
are consistent.
Change-Id: I5a71980147fe8dfb471ff42e8bc06db2124a1a7f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/390914
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We also caculate the time for still dumping the
performance data.
Change-Id: I59b736268ca57a366666a4bf55458ec3f279f4e7
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/390702
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Disallow multiple I/O queues for the same controller with the same queue
ID. NVMe-oF 1.0 ECN 001 specifies that this condition should return a
status value of Command Sequence Error.
Change-Id: I41126ddec388a985c403025e099ab15da5d3987c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/390662
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I4d3cced91e804fbbb96a15a09b575ff85960ddef
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/390661
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ifd00dd647002ea226df826c558232d97d366ab81
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/390660
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The lvol bdev which used to create nested lvol store
should be $lb_name.
Change-Id: Ic8d68f8d18bcb0c1d4bca0b4612a4a07ed8b974d
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/390350
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is necessary for SPDK_RUN_ASAN to function properly.
Change-Id: I22f4e8dde225967a3db3718270c2626f178af319
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/390858
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Similar to 759e5934eb (test/iscsi: initialize pgs before adding to pg
map), make sure the spdk_scsi_ig structures are zero-initialized before
passing them to spdk_iscsi_pg_map_add_ig_map().
Fixes Valgrind "Conditional jump or move depends on uninitialised
value(s)" errors in two tests.
Change-Id: I38c095aa7c6a89cb9332618b63fe12a02bcf3c2a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/391000
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ibf243d4e9804acda8ee712253722c963bb0120fc
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/390997
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This fixes some issues found with Valgrind (incidentally *not*
found with ASAN).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I49bbd4b338299568eaa4a118aa82fc411037cea7
Reviewed-on: https://review.gerrithub.io/390909
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Added new keyword 'Target' that will replace 'Dev'.
'Dev' is still usable, but deprecated and will be removed.
Change-Id: Iafd6114ef2cc5b2f8d58497e9fb454a3a237ed16
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Reviewed-on: https://review.gerrithub.io/388568
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Check if a LUN already exists before allocating the spdk_scsi_lun
structure - this matches the real implementation of
spdk_scsi_lun_construct().
Fixes: e44731d659 ("scsi: Remove the claimed flag from LUN")
Change-Id: I529648f93cd21e9f19ce82ef571cabe9c7e8c49a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/390903
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Add g_spdk_nbd to record multi-nbd-disk in the
future. nbd subsystem will be used to init and
finish g_spdk_nbd and its linked spdk_nbd_disk.
Change-Id: Ia67caa57b9920d0080f8b2fa1c8e87615803e5fe
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/390097
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
nbd poller is put into spdk_nbd_disk.
nbd test app no longer needs to process spdk_bdev.
This enables upcomming patches to move nbd test app
functionality to SPDK library.
Change-Id: I1b563a49dc9488e8dcc20706be82b17fdbd07ff1
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/390093
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
In principle, we should not have active tasks, which means
that lun->tasks should be empty. But for the exceptional case,
we may still need to handle those active tasks, to make
the scsi related application continue running instead of quit.
We should not directly call spdk_scsi_lun_complete_task since
those tasks are already sent to bdev layer. And finally, those
tasks will be return (even aborted) by call backs. So we only need to
set task status to condition, but
not call spdk_scsi_lun_complete_task directly.
Change-Id: I6af2bda0f0b1de7b0c655d2ac2980ddca48c1162
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/386817
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Struct spdk_scsi_lun has the claimed flag as a member.
However the claimed flag is no longer required.
Moreover the claimed flag itself is not used but
spdk_scsi_lun_claim() and _unclaim() functions are used in the
UT code by hard to understand manner. Moving the logic into
spdk_scsi_lun_construct() and _destruct() in the UT code will
be more natural.
Hence remove the claimed flag from LUN and do a little refactoring
in the UT code.
Change-Id: Ica9680b49bbdb5be7c5c4161210fb3a6dcb35229
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/390566
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Currently even if PG mapping is removed from iSCSI target,
corresponding SCSI port is not removed. Hence dynamic
reconfiguration of PG to existing iSCSI target is not supported.
This patch supports dynamic SCSI port removal when the
corresponding PG mapping is removed from the existing target.
Some refactoring for SCSI port addition is also done
Change-Id: Ib06bc10743eb088d023f425742e39bb24f1b0df1
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/389056
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Disambiguate the log components from the trace functionality
(include/spdk/trace.h).
The internal spdk_trace_flag structure and related functions will be
renamed in a later commit - this is just a find and replace on
SPDK_TRACE_* and SPDK_LOG_REGISTER_TRACE_FLAG().
Change-Id: I617bd5a9fbe35ffb44ae6020b292658c094a0ad6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376421
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The get_available_rdma_ips function can't get port IP in ubuntu
system. Update the function to fix this issue.
Change-Id: I1b8a0b1159ce7919f883a21067de78d5166954b2
Signed-off-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-on: https://review.gerrithub.io/390613
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
NVMe specification 1.3 added a new Admin command: Doorbell buffer config,
which is used to enhance the performance of host software running in
Virtual Machine, and the Doorbell buffer config feature is only used
for emulated NVMe controllers. There are two buffers: "shadow doorbell"
and "eventidx", host software running in VM will update appropriate
entry in the Shadow doorbell buffer instead of controller's doorbell
registers.
Change-Id: I639ddb5b9a0ca0305bf84035ca2a5e215be06b46
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/383042
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The function just needs to zero out metadata so that the
blobstore is effectively destroyed. If the user wants
to unmap the rest of the disk after the blobstore is
destroyed, they are free to do so. On future initializations
of blobstores the code will do the unmapping, so performance
is not impacted.
While here, implement the zeroing using the new
write_zeroes functionality instead of allocating a buffer
full of zeroes.
Change-Id: I7f18be0fd5e13a48b171ab3f4d5f5e12876023bc
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/390307
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This readme and bash script can be used by developers to quickly deploy
a new vm in which to pretest their spdk patches.
Change-Id: I12f805e925dae9120ea8c451c9c5b07df4ffaf4b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/387673
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove the [Rpc] section of the vhost initiator bdev.conf file and use
the bdev_svc -r parameter to set the RPC address instead.
Change-Id: Iaa5f6947b49679082f00d4c30d625ab2e5db8441
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/390327
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A previous commit modified this test to specify the RPC address via
command line, but failed to remove the [Rpc] section from the
configuration file.
Fixes: 59515ed6f8 ("test/iscsi/ip_migration: use UNIX socket for RPC")
Change-Id: Ibd5ac69c8e72fefc7e7b540df280d8a55b0b9946
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/390326
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I3cbb52cd9a4201704423b49eae74935b8a33b0fd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389903
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The iscsi fio_remote_nvme test was failing because the large malloc bdev
was consuming too many contiguous hugepages and the call to
construct_nvmf_subsystem was failing on some machines. This change increases the memory
allocated for the nvmf_tgt app which solves that problem.
Change-Id: Ibc882d83c5b983baee9b004bfc0970562f7f2e1f
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/390320
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9afa07b5dae99955ba87d7c8130b2ce6f04e7941
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/389641
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
There isn't a way to remove a namespace just yet, but at least
adding one works.
Change-Id: I99416d1bc9cbc0e2303c16040d2311a07829cbea
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/388293
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch is a preparation for dynamic reconfiguration of PG-IG maps.
Current PG-IG map is implemented by a fixed-size array. Linked list
will make much easier to support dynamic reconfiguration of PG-IG maps.
Current:
target - (1..n) ---> PG_map (1..1) -> PG
|
--> IG_map (1..1) -> IG
This proposal:
target - (1..n) -> PG_map --- (1..1) -> PG
|
-- (1..m) -> IG_map - (1..1) -> IG
Change-Id: I92f668b81cdd8003aff222926f8f1ed96b61e56d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/385532
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Add nullglob options where appropriate
Change-Id: If55b0b2e19a7834eaf2efc86b2c23fcc71d8b05f
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/389292
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Similar flags will be added at the blobstore level in a future
patch.
This allows backwards compatibility - i.e. allow older blobstore
applications to open blobstores created by newer blobstore
applications with new features. Any blob's using a new feature
should have an associated flag set in one of three new flag masks:
- invalid: if a bit is set in this mask that the application is not
aware of, do not allow the blob to be opened
- data_ro: if a bit is set in this mask that the application is not
aware of, allow the blob to be opened, but do not allow
write I/O nor any operation that changes metadata
- md_ro: if a bit is set in this mask that the application is not
aware of, allow the blob to be opened for performing any
kind of I/O, but do not allow any operation that changes
metadata
While here, bump SPDK_BS_VERSION to 3. We intend this to be the
last change made to SPDK_BS_VERSION - future versioning will be
done via blobstore or per-blob feature flags instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If059e38bfffbeec25c849a7629a81193b12302c4
Reviewed-on: https://review.gerrithub.io/388703
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The results of access control procedure for login in the
spdk_iscsi_tgt_node_access() is defined in the following table:
+------------------------------+
|iscsi name |netmask |result |
+------------------------------+
+------------------------------+
|denied |- |denied |
+------------------------------+
|allowed |allowed |allowed |
+------------------------------+
|allowed |denied |next IG |
+------------------------------+
|not found |- |next IG |
+------------------------------+
However current implementation have redundant repetition in the
spdk_iscsi_tgt_node_access() and the above definition is not
visible. Hence refactor spdk_iscsi_tgt_node_access().
Besides refactor spdk_iscsi_tgt_node_allow_iscsi_name() because
it has redundant repetition too.
Add UT code for these changes.
Change-Id: If06d87c1246c85439ee0482149bd887a7b53b169
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/379935
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Naming rule of access control of iSCSI target does not reveal its
intention. Hence change it before refactoring to avoid unnecessary
repeated procedure.
Change-Id: I4064ec0a5a2b52244b6de3958ee2ab41342d1a57
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/381248
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
In the accessibility control of iSCSI target, "ALL" is used to allow
ANY IP address-port pair or iSCSI name of initiators. However iSCSI
targets cannot know ALL initiators beforehand.
Hence "ANY" will be better than "ALL" and will avoid misunderstanding.
Comments and iscsi_tgt test code are also changed and UT code is added.
Change-Id: Id004d819df6e9ee89f6c1db2e4b4c149be062733
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/385168
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Fix: Add condition to some test cases
because there are more possible return values
in check_get_lvol_stores function.
Change-Id: Id035d1edc52252f009277c9afd5f07f8875e0dcc
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/388242
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently, the nightly tests are hanging due to the AER test program,
which waits for a temperature threshold event to occur. The QEMU
emulated NVMe controller (as well as the SPDK NVMe-oF target virtual
controller) don't emulate this condition, so the test never finishes.
Change-Id: I41a216f77ffbb3beaef2fdf7533fe62c36033fc6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389908
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
As of this patch, it is unused.
Change-Id: I15f42b8cc43e3792ae69c91f3911b7853d5b5664
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/388292
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
All of the call sites already have a lvs pointer; there's no need to
look up the lvs by UUID again.
Change-Id: Icef54d84e7c89f682ea47f10b282839ab4237ce0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389892
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This issue may be hit under some large IO and large queue
depth cases where much memory will be consumed and the channel
may be failed to create due to insufficient memory.
The general fix here is that we need to properly handle
the error case that the channel is not created due to this
or that reason.
Change-Id: Icf58a7c8a9cba625ef1b8da6b8bf68ef72ef5546
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/386051
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use the common SPDK application argument parsing function.
This adds support for several more common options to the bdev_svc test
tool.
Change-Id: Iccccf158164182aa36d0837210d8b189be3b6cd6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389866
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It will allow to put another test cases
in specifig group.
Change-Id: Id352aa516676f78cdb102f8eac70144f115976a5
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/389098
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
data_ro means that write, write_zeroes and unmap operations are not
allowed.
md_ro means that resize, set_xattr and remove_xattr are not
allowed.
There is no code yet that can activate this - it is coming in a future
patch. Two usages are planned though:
1) a user explicitly marks a blob as read-only - this is persisted so that
future loads of the blob will ensure the blob cannot be modified - neither
metadata nor data
2) a future feature flag framework (how's that for alliteration) may allow
a blob to be opened, but not allow metadata modifications, if there are
feature flags set in the blob's or blobstore's metadata that the
application does not understand
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I247fd900430c56f7176edfb80dddd5a1a6c8dc87
Reviewed-on: https://review.gerrithub.io/388663
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Only multi-process shared controllers should be inserted into the shared
list in g_spdk_nvme_driver. To accomplish this, create a second
per-process global list of attached controllers (g_nvme_attached_ctrlrs)
and rename the driver struct field to shared_attached_ctrlrs to clarify
its purpose. Additionally, a new helper function, nvme_ctrlr_shared(),
returns whether a given controller should be on the shared or
per-process list.
Change-Id: I46d4e558ece8b7fc3d28868e32bb56d794f21aab
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389190
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Simplify the PCIe transport by using an existing function to look up a
controller by transport ID.
Change-Id: I261865df1ba23069b052ca64944b7637d70c85ba
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/388701
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Each process should manage its own list of controllers that are
initializing; the list doesn't need to be shared between processes.
This is the first step toward preventing non-PCI controllers from being
added into the shared attached_ctrlrs list.
Change-Id: Ia6f85fe89e28a04f0950da5362bb2f49d1b76da9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/388695
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change the return type of spdk_bdev_register related
functions and try to handle the duplicated name
issue.
Change-Id: I23af11583cf2050579d1624508306a35394bffde
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/388178
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Use the new one from io_channel.h.
Change-Id: I7bf6729caf6eeebcb58450a36119601957ad5da4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/388290
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This function will send a message to each allocated
thread asynchronously, then call a callback on
the originating thread.
Change-Id: I3ebe7c6c5b460a944a32487d1091b601a482a256
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/388041
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This simplifies the public API and requirements for
user applications.
Change-Id: Ibb0d25a7838a0fa683f39e79cb4fef78adf6aee8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/388040
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Make this generic and not directly dependent on
the event framework. That way our libraries can
register pollers without adding a dependency.
Change-Id: I7ad7a7ddc131596ca1791a7b0f43dabfda050f5f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/387690
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Ib2bdbe6e8cbbefadac0b38f2a552daea7d4c4b1c
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/388151
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This should be removed.
Change-Id: I122ef2729d8389fab6cc8883bc70f221c48f574b
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/388884
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
When the ((timeo-=1)) value equal to zero, it will cause
the trap in main script to start "error_exit" function
which already does kill the vm.
Change-Id: I30fb7dfa0c3b1a5faa6a88e9743164137b376bef
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/386208
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is used to remove tht task_pool allocated
by spdk_mempool_create.
Change-Id: I8d3a483477d7fd8b5893baa41b8658893c852f6c
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/388534
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Commit c63d9de433 replaced
remove_vhost_blk_controller with remove_vhost_controller, but test
wasn't updated to match. The test had already been broken before that
point, because the RPC method name was incorrectly spelled using "block"
instead of "blk". This hadn't been caught because this particular test
is expecting a failure, just not the particular failure that is being
caused by the incorrect method name.
Additionally, the "create block controller with incorrect name" test was
actually using the construct_vhost_scsi_controller RPC rather than
construct_vhost_blk_controller, so fix it while we're here.
Change-Id: Ib60f51639e0a3f65b09e2663186aa259be407ee4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/388060
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch could prevent the potential coredump of
accessing rte_mempool among multiple threads. We
allocate the tasks from the beginning.
BTW, this patch also refactors the bdevperf to remove
dpdk dependency
Change-Id: I841e6c8b43276923acaf6686377741c37e2e71ec
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/387871
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It is outdated and not really usefull.
Change-Id: Ifcfd1c987467448cb6f827457de215922a701d77
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/387797
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is inconsisten with local variable deffining the same path. We need
also to move negative vhost app tests from run_vhost.sh since VHOST_APP
will not be available anymore.
Change-Id: I21cee58c545357ca7e7997cb529b15d436cfed57
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/387561
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Until the fio_plugin unload crash is fixed, disable the fio portion of
the tests so that we can re-enable the rest of the bdev/virtio testing.
Change-Id: I8d18fff729262fa88cbc66fce914cf1ff92db83e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/388307
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Switch the iSCSI process in the iSCSI/NVMe-oF test to use a UNIX domain
socket for RPC instead of a TCP socket.
Change-Id: I130b2871c74b6bd9aa55a63d751c995a579e03bf
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/388287
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Switch the ip_migration test away from using TCP to access the RPC
service.
Change-Id: Ic89f59acf60016ae2669b267f09a035413ab22e1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/388286
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
discover_bdevs previously took a port number for the RPC service, but
after commit 6bef902ca5 ("rpc: add default UNIX domain socket listen
address"), running rpc.py with just a -p (port) parameter doesn't have
the expected effect, since the default server_addr is now a UNIX domain
socket path, and the port is ignored.
Change discover_bdevs to accept a socket path instead of a port number
to fix the issue for the vhost/initiator test; no other callers use the
disover_bdevs rpc_port argument, so this is the only instance that needs
to change.
Change-Id: I4e290f175ccc79caa3c4ef76c062641b9fe489a8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/388283
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
To add initiators to an existing target, manage name and netmask
of initiator group by linked list. It is not easy for array to
detect duplication and change configuration.
Change-Id: Id9e77740e24ac309a33d8de1be37663681160d94
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/379932
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
spdk_iscsi_init_grp_create_from_configfile() returns 0 even if
creating an initiator group (IG) is failed due to empty netmask or
initiator name. This will be unexpected behavior for end users.
Hence change the return code from 0 to -ENVAL for this failure.
Besides do the following.
Change other error return codes in the function by using errno too.
Current IG don't have any UT code in repository. UT code to confirm
this fix is also submitted.
Change-Id: Ic918feb5c6a3e772b325664d881b2673b553a217
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/384408
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ic11a56c5616098ff42f31f78aa96289af5965118
Reviewed-on: https://review.gerrithub.io/387611
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Typo caused lvol blk test to not run.
Change-Id: I1e26b96757450a3ea860e0b74a0b7d976c86bdf2
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/388413
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Adding new functions to core vhost requires adding their equivalent
mocks in both vhost_scsi_ut and vhost_blk_ut separatly. By adding common
file "test_vhost.c", we can prevent duplicate mock functions.
Change-Id: I4542ae092e158b94b25559216e1fc46e10c1a1ae
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/383357
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Adding positive and negative lvol friendly names specific tests.
Test plan updated.
Also fix some test naming discrepancies between plan and
script while at it
Change-Id: Ifb1a62d6a231f4f4ebfb5bb6178d941fc2b9770d
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/385552
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Add lvol tasting positive test case.
Adding new autotest config option for better control
where test is executed
Change-Id: Ic08b2395bd14e15072711b97c77b7e1ce26dd2b7
Signed-off-by: Lukasz Galka <lukaszx.galka@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/383432
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change the return type of spdk_channel_msg from
void to int. If this msg executed in a failure,
we do not need continue sending the message to other
threads, we can just tell the original thread, and
let the orgiginal thread call the spdk_channel_for_each_cpl
call back.
Thus we can track the qpair creation/destroy case for bdev
reset in nvme bdev module;
Change-Id: Ide9dffd1f84a29fcf61d8339a9ece2a0245d968d
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/387284
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8ea8c59a0c67176c0c0c39abf807afad61ff3828
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/387689
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I864cd8a6c206dfbe62fcb3f72275c1ae51aa4ed7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/387688
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
nbd_start(), nbd_poll(), and nbd_stop() will all be called
on the same core, so the poller unregister will complete
synchronously.
Change-Id: I4f83f3821102277704422ed63d4cde424324e0a4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/387686
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Register all pollers to the current core. If necessary, send
an event to the correct core before registering.
Change-Id: Ie34cc8b11143a58c0f621c87c409a3d09d929648
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/387682
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Removing norandommap as it is not correct to use with
verify-enabled tests
From fio man:
Normally fio will cover every block of the file when doing
random I/O. If this parameter is given, a new offset will be
chosen without looking at past I/O history.
This parameter is mutually exclusive with verify.
Change-Id: I739642461b3dbe9ab8698836aa120bfb14c2b79e
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/385431
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Use the env abstraction PCI functions to compare PCI addresses so that
details like whether or not domain is specified or whether 0-padding is
present don't affect the comparison.
For example, 0000:01:00.0 should compare equal to 01:00.0.
Change-Id: I9f3aaeb5f8fdbf3e246e31a41b4c09151288015e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/387202
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
