Add unit test for calling spdk_lvs_load_ext()/lvs_load()
with invalid options (opts_size is 0).
Change-Id: I9c48b972066cf977304e3efa936827d1ef1b5250
Signed-off-by: Marcin Spiewak <marcin.spiewak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17584
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Mike Gerdts <mgerdts@nvidia.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
lvs_load() function verifies if options passed to it
are valid, but doesn't return, if they are not (only error
is logged and callback is called with -EINVAL code). Now
it is corrected and the function ends after the error
is reported.
Change-Id: I19b0b22466b6980345477f62084d27ef13414752
Signed-off-by: Marcin Spiewak <marcin.spiewak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17582
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
When changing src/dst buffers, we copied memory domain pointers, but we
didn't copy memory domain context, which is obviously incorrect. It was
probably missed, because we never append a copy with non-NULL memory
domain. Added a unit test case to verify this behavior.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ic174e0e72c33d3f437f0faddd3405638049f0c74
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17425
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This file should be external to enable out-of-tree accel modules.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I2e973d0e88d7145d0fc9714f56db48486b00f3b7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17419
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_bdev_queue_io_wait() can only be used when one of bdev submission
functions returns ENOMEM (i.e. there are no more spdk_bdev_ios on that
IO channel). Using it in any other case, e.g. on spdk_accel_append_*()
returning ENOMEM, will most likely result in failure. Therefore, to
avoid that, the IOs are completed with NOMEM status relying on the bdev
layer to retry them.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ie0f03496e5d3180c481815b3f1b021e74ae2f46d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17319
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This actually allows malloc bdev to chain multiple accel operations
together. And, since the last operation will always be a copy, accel
should remove that copy by modifying previous operation's dst/src.
On my system, it improved bdevperf performance (single core, qd=4,
bs=128k, bdev_crypto on top of bdev_malloc, crypto_sw):
randread: 5668M/s -> 8201M/s
randwrite: 5148M/s -> 7856M/s
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I5b9173fa70a42ee56f56c496a34037d46d2f420f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17202
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Because the copying is handled by accel, which will do push/pull when
necessary, we can report support for each registered memory domain.
Also, since verifying PI information would require doing a push/pull, we
don't report support for memory domains if bdev has DIF enabled.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Id80f82aaac68e9dec2a6cae81d96a460105161d6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17201
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Same reason for the change as in bdev_malloc_readv().
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Id52d8639df6a488342346283c90f12a2ba6f5736
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17199
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This only changes the interface bdev_malloc uses for scheduling the copy
to appends, but it won't chain those copies to an existing sequence, as
bdev_malloc doesn't report support for accel sequences yet. That will
be changed in one of the subsequent patches.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I6db2c79b15cb96a1b07c6cf5514004c76b9d2e92
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17198
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
It reduces the size of the parameter list, which was already pretty
long, and will make it easier to use other bdev_io's fields (e.g. memory
domain, accel sequence).
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I43a9d3a7cbb77915c00879c43540c9ec725c52d2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17197
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If a request was marked as failed, we don't want to retry it, so we
shouldn't override its status with NOMEM.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I85a522a7934d2d6f415620b9a323effefb91f299
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17196
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It gets rid of lots of casts to malloc_task/malloc_disk and makes the
code more readable.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Id50f0cbfa18adf5e7baafd58da03d290d6ba62c6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17195
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It always returns 0 and any errors are reported in the callback. Making
it void simplifies error handling.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I0d4299a2789a688eae38d76de46d1baf27cbbd8f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17194
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
This test sends several read/write requests and verifies the expected
number of accel operations have been executed.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Idda46ef00dc5bcc0a176d3dfb39f3f3861964741
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17193
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
095f40630e missed the autobuild dependencies while enabling the rpm
test against the external DPDK build. Without it, DPDK is not able
to properly configure itself against ipsec and isa-l libs.
Change-Id: Ia4307f0d0f9c1f82f6f80ca06113a5289c2916ed
Signed-off-by: Michal Berger <michal.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17576
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Dump it to stdin to make the debugging easier.
Change-Id: I9b13d0a77e45aa84ec2a55b7b982225592f2566d
Signed-off-by: Michal Berger <michal.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17560
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Some nvmes need more time to attach|detach to|from, hence having a
static sleep is not ideal depending on what type of the nvme was
picked up for the test. Instead, simply wait until the list of
nvme ctrls is empty after the cleanup.
Change-Id: I2fc2630020436d0e1f6b01a5ce60aea56e7bf8ec
Signed-off-by: Michal Berger <michal.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17559
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
We need to give the thread library some time to reap
the unregistered poller - it is a bit of a delayed
process. We have to wait for examine to finish on
the aio bdev, then the poll group gets destroyed and
the pollers unregistered. This marks the pollers as
UNREGISTERED, but they aren't actually reaped until
next time the thread is polled.
Fixes issue #2980.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1e32c50ea9b28ea2d5560ddc9b2f68fa81e708d9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17575
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Not all raid modules may support memory domains - raid5f currently does
not. Add a parameter to struct raid_bdev_module to specify that.
Change-Id: I3285c118db846d290837606b3f85ac4b5277de97
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17601
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Deprecation notice for pmem was removed, as libreduce will
still use it until pmem is supported.
Change-Id: I7555dbf20a408a67fac8a6e7b2eaa23edf985eec
Signed-off-by: Marcin Spiewak <marcin.spiewak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17538
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
To make sure we don't lose statistics of destroyed channels, they're now
added to a global stats structure when a channel is destroyed.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ic3b4d285b83267ac06fad1e83721c1b15cc8ec8a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17567
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
The RPC allows the user to retrieve accel framework's statistics.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I5cd1b45686504c08eda50513ad1dae2f8d65013b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17191
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds support for collecting statistics in accel framework.
Currently, it counts the following events:
1. The number and the type of executed/failed operations.
2. The number of executed/failed accel sequences.
For now, these statistics are only collected and there's no way of
retrieving (or resetting) them - that will be added in the following
patches.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Id211067eb810e7b7d30c756a01b35eb5019c57e7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17190
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
It'll allow for setting accel-specific options. For now, it makes the
size of iobuf caches configurable.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Iaf505cc5e98dc6411453d9964250a4ba22267d79
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17188
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These can be found under CYP platform.
To that end, refactor qat_setup.sh so it can support devices based on
their dedicated driver rather than the specific device ID - this will
allow for easier addition of new devices in the future.
Also, configure number of VFs based on total number given ctrl
supports - this is exactly what qat_service is doing while enabling
VFs.
Drop warning about old bug in the uio_pci_generic driver - in
practice we don't hit that under CI since quite a long time.
Slap errexit on top to make sure we exit immediately when writing
to sysfs fails.
Last but not least, run blockdev_crypto_qat test without any top
condition - if qat_setup.sh succeeds, the test should be able to pass.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I37c4fd319ad7002017f9baf9fdcf3890429aac75
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17086
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
There's no default defined so it doesn't have to be available in the
env at all. Adjust the echo so we don't include an empty string.
Change-Id: Icaa75915544f9da1adcdcdeafce29f5ae97149ab
Signed-off-by: Michal Berger <michal.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17428
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Packaging tests will be done under a separate docker job, hence there
will be plenty of time to run them together. Keep DPDK-related builds
in nightly as they are quite sensitive to any changes (especially API
related), hence not very fit for per-patch testing.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ia1af5b0e86a503f540c32d2e030088d8a24f8847
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16046
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is to make sure we export all SPDK_* with proper values.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I2f01af1a051edcec6a75f99b25b765080abf2a5d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17212
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In case SPDK is build with shared libraries and there's no
LD_LIBRARY_PATH around, linker will complain about missing .sos
similar to:
/usr/bin/ld.bfd: warning: librte_meter.so.23, needed by
/root/spdk/dpdk/build/lib/librte_ethdev.so, not found (try using -rpath
or -rpath-link)
We can't see that under CI since autotest_common.sh always makes sure
the LD_LIBRARY_PATH is properly set.
Add the -rpath to make the build less spammy.
Change-Id: I1d9d1775b2aa24e65cc4b776c2549457b0d7aac3
Signed-off-by: Michal Berger <michal.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17492
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This tells lto-wrapper to either use make's jobserver or fallback to
auto guessing number of cpu threads used for the build. Mainly, this
should silence the following warning:
lto-wrapper: warning: using serial compilation of N LTRANS jobs
lto-wrapper: note: see the ‘-flto’ option documentation for more
information
Change-Id: Ib848319c858f4371b94f9264d22449535d25d6da
Signed-off-by: Michal Berger <michal.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17491
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It's too verbose and may send confusing (in context of the actual
cleanup) messages.
Change-Id: I9e86e20afcf567fb54fec3a6cfb9008ad2080a12
Signed-off-by: Michal Berger <michal.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17485
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In commit 23baa67, we will start virtio device only once,
and update the VQ's information in SET_VRING_KICK message
context, so when multi-queues are enabled, SPDK doesn't
register VQ's interrupt handler, here we add it when enable
VQ.
Fix issue #2940.
Change-Id: I29dbd7bf0b81b23c2e47e37c467952cc5887b5bf
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17354
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
bdev modules should have call spdk_bdev_io_complete twice
for the same IO. We can help find cases where this happens
by adding an assert in spdk_bdev_io_complete - confirming
that the current status is still PENDING, before changing
it to the status passed by the caller.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id8a044a94113f1ac5e3c8d86e426654bfa8d5c5a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17330
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reset the status for a bdev_io that fails with NOMEM status
back to PENDING immediately when it is put on the nomem_io
list, instead of waiting until it gets submitted again.
This helps keep the bdev_io states consistent, so that if
we need to complete these IO for abort reasons later, that
we aren't completing IO that already have a non-PENDING
state.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9532095141209ed6f7af362b52c689da62e755ce
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17335
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Even though these NICs are not used by Community CI,
all tests fail if to run on a system with
CX6 Dx, CX7, BF2 and BF3.
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: I23aaf8ddbc5b165f0a4372108d1f4b34f0b2ccf7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17166
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Handling this callback is quite complex and may lead to
various problems. In most of places, the actual event
when qpair is dosconnected is not importnat for the
app logic. Only in shutdown path we need to be sure
that all qpairs are disconnected, it can be achieved
by checking poll_group::qpairs list
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: I453961299f67342c1193dc622685aefb46bfceb6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17165
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If the qpair is already in the process of disconnect,
the spdk_nvmf_qpair_disconnect API now return -EINPROGRESS
and doesn't call the callback passed by the user.
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: If996b0496bf15729654d18771756b736e41812ae
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17164
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Current implementation of spdk_nvmf_qpair_disconnect
saves and calls user's callback correctly only on
the first call. If this function is called when
qpair is already in the process of disconnect, the
cb_fn is called immediately, that may lead to stack
overflow.
In most of places this function is called with
cb_fn = NULL, that means that the real qpair disconnect
is not important for the app logic. Only in several
places (nvmf tgt shutdown flow) that is important to
wait for all qpairs to be disconnected.
Taking into account complexity related to possible stack
overflow, do not pass the cb_fn to spdk_nvmf_qpair_disconnect.
Instead, wait until a list of qpairs is empty in shutdown path.
Next patches will change spdk_nvmf_qpair_disconnect behaviour
when disconnect is in progress and deprecate cb_fn and ctx
parameters.
Fixes issue #2765
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: Ie8d49c88cc009b774b45adab3e37c4dde4395549
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17163
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch removes usage of cb_fn argument of
spdk_nvmf_qpair_disconnect API. Instead of relying
on the callback, post a completion on delete SQ
command when transport qpair_fini is called.
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: I68dec97ea94e89f48a8667da82f88b5e24fc0d88
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17168
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Common practice is to purge workspace on the jenkins side when the
job is done. When that happens, stuck processes may still linger,
but readlink -f will fail to resolve exe link as the target binary
won't exist anymore. Instead, just see what the link points at
and include it in the list.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I437a720e12e43e33fbf04345a6b77987167864fe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17050
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
SW PMD might process a crypto operation but failed
to submit it to a completions ring.
Such operation can't be retried if crypto operation
is inplace.
Handle such crypto op as a completed.
Verified by integrating rte openssl driver and
adding additional logs to check that SUCCESS
status received and completed as expected.
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: Ida161cec045167af752ebd5b57f41b2bbfe8b97c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16995
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There is no access to fuzzer logs if `index.html` is in the same dir,
move covrage to `$output_dir/llvm/coverage`.
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: I139a6d780754aaf5b1333a2e5b0183bd24488bfa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16341
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Save crash files and other artifacts in `$output_dir/llvm/`
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: I2ff82b414592cc492b79c9178b7257b2e87440b5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15827
Reviewed-by: Michal Berger <michal.berger@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: Iad129c1bc62116a93701a5f68c78351f01a4c878
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16249
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
With corpus files persistent between fuzzer weekend run it may be
better to start all test for fraction of time instead of different
test every week.
Remove `poll_groups_mask` from config, this patch run every test on
single core and since then there is no need to specify another mask.
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: I4448724801bdf1a3c496f829fd168b840c2efa67
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15384
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
