This will allow us to call `connect_qpair_poll()` from
`process_completions()`. Otherwise, `nvme_fabric_qpair_connect_poll()`
which calls `process_completions()` might create a loop, which can cause
issues with `nvme_completion_poll_status` used for tracking the CONNECT
command by the fabrics code.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ibd67bc3e011b238db264394e005b3268624cceef
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8623
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
The fabric connect command is now sent without. It will make it
possible to make `nvme_tcp_ctrlr_connect_qpair()` non-blocking too by
moving the polling to process_completions (this will be done in
subsequent patches). Additionally, two extra states,
`NVME_TCP_QPAIR_STATE_FABRIC_CONNECT_SEND` and
`NVME_TCP_QPAIR_STATE_FABRIC_CONNECT_POLL`, were added to keep track of
the state of the connect command. These states are only used by the
initiator code, as the target doesn't need them.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I25c16501e28bb3fbfde416b7c9214f42eb126358
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8605
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
These functions will allow for sending the connect fabric command
asynchronously.
Additionally, this patch changes the return code for
`nvme_fabric_qpair_connect()` when a timeout occurs from -EIO to
-ECANCELED. It gives better description of the error as well as make it
more consistent with `nvme_wait_for_completion*` APIs.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I95806626d3573ebe4b1568157fd57013c4b909a7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8604
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Since the connect will be completed asynchronously, we
need to keep the pointer around so we can access (and
free it!) later when the command completes.
Also change the code to poll on the status using the
new nvme_wait_for_completion_poll(), as prep for upcoming
patches.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I28add8f967fd000afed1e50e491a16ea9da16c22
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8603
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This gives us a context that we can poll on when using the
nvme_wait_for_completion framework for async operations.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I5b23f9096eed5ce95848d1995c1ed0b4c74edc92
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8602
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Modified the async_list to be per-process instead of
on the controller object. This allows an NVMe multi-
process setup to have Asynchronous Events Reported
to each process that may interested in them. In the
previous case, where the async event list was on the
controller object, AER (Async Event Requests) would
not be reported to all the processes.
Fixes: #1874
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Change-Id: I3e885c0cf5a0fd471d243bc7d96a8b7ffe65d14b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8744
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Cleaning up the API, implementations were removed in 7dbe0e7c.
Signed-off-by: Tomasz Bielecki <tomasz.bielecki@wdc.com>
Change-Id: Iae25bbb301da123f9e784678d4c4f0b8d39f262e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9221
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There may be multiple C2H data pdus recevied.
So we should use the following steps:
1 Use the SPDK_NVME_TCP_C2H_DATA_FLAGS_LAST_PDU
to check whether it is a last pdu or not.
Then we will not cleanup tcp_req, i.e., tcp_req->datao
will not be cleaned.
Then use the SPDK_NVME_TCP_C2H_DATA_FLAGS_SUCCESS
to check whether the controller will use resp pdu
or not.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I9dccf2579aadd18f31361444e25bd4b3b76f06c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9192
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was accidentally merged as part of c3a5848.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I430e7035e9c2baf0b8d0592cda76265957c3791e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9251
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is exension to the existing nvme_wait_for_completion* interface
that allows the user to poll for request's completion without blocking.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I6c5b7203883f8e2fa28ceb039ce63aa50631f571
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8601
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is needed to enable using the nvme_completion_poll
machinery in an asynchronous mode.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I8009ab81bcc02cba685f560be3d6540aab7ef3f3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8600
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will be done in stages. This patch adds the
nvme_tcp_ctrlr_connect_qpair_poll function and and makes the icreq step
asynchronous. Later patches will expand it and make the
nvme_fabric_qpair_connect part asynchronous as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ief06f783049723131cc2469b15ad8300d51b6f32
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8599
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The pcie layer can't always detect bad addresses
in the request at submission time - for example,
the transport may not have any trackers available
and the request gets queued at the generic
nvme level.
So this means that we might detect vtophys failures
during submission time, or in a process_completions
context - the latter happening when we complete
one request which triggers submitting a new request.
Currently if the vtophys failure happens during
submission context, we return -EFAULT to the
caller *and* call the completion callback. Nowhere
else in the driver do we do both - the intention
has always been that you get one or the other.
So make all of this consistent by tagging the
tracker and the qpair with a flag if we hit a vtophys
error in the submission path. Return 0 to the caller,
who will then later get a completion callback for the
bad request when the qpair is next processed for
completions.
I considered a separate TAILQ to hold these 'bad'
trackers, but that would have required duplicating
quite a bit of the tracker completion code for this
one case. The flag on the pqpair is already in the
hot cacheline, so it's cheap to check it. We will
only interate the outstanding_tr list when that flag
is set, so this should have zero impact to performance.
Fixes issue #2085.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I60b135fb32d899188e51545b69feb1b27758fd7f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9234
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
These functions accept extendable structure with IO request options.
The options structure contains a memory domain that can be used to
translate or fetch data, metadata pointer and end-to-end data
protection parameters
Change-Id: I65bfba279904e77539348520c3dfac7aadbe80d9
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6270
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Add a global list of memory domains with reference counter.
Memory domains are used by NVME RDMA qpairs.
Also refactor ibv_resize_cq in nvme_rdma_ut.c to stub
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ie58b7e99fcb2c57c967f5dee0417e74845d9e2d1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8127
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
This avoids an infite loop when user sends and then immediately aborts
all requests while the transport cannot submit them (returning -EAGAIN).
It might happen in two cases: 1) if the transport doesn't have any free
requests or 2) if the qpair is still in the NVME_QPAIR_CONNECTING state.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ia1d0b7c93f387524be0ad39597ec49851e1d3af7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8711
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Needed to make this code path asynchronous.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6b18d4e9fc1a29b30c78f7f087b80913d00f9726
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8598
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
If a qpair is part of a poll group and it's not configured in the async
mode, it should be using poll group's process_completions variant.
Additionally, connecting qpairs to the poll group was moved up, so that
qpairs are already on the connected qpairs queue when waiting for the
connection to complete.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I08f75bd61a566d1ab60029b6202d9337df75733f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9074
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Replaced poll cycle count with a timeout when destroying a qpair that is
part of a poll group. Tracking the time instead of a poll count is more
stable, as the number of poll cycles can vary based on the application's
behavior when destroying a qpair.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I7445bc1b411f2905aab7bf3dc7b2d3344712e1eb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9200
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Number of active namespaces may change. So, on ANA log page update we
should check if buffer has to be resized.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I1720317ea7f59e5afef73d5c4bd1cd69a7dd6520
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8583
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Log page reading function 'spdk_nvme_ctrlr_cmd_get_log_page' does read
into intermediate buffer and then copy to user provided buffer. So,
there is no need for user buffer to allow DMA.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I7337afa99c3ae666cc43ea2a48317de875334cfc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9177
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
In the next patch, the qpair is polled from a poll group and needs a
disconnect callback, which should also fail the qpair, so it makes sense
to have a separate function doing that.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ied76431520962b25220027be829a4609afb6bbda
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9157
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
async_mode option is currently supported in PCIe transport layer
to create io qpair asynchronously. User polls the io_qpair for
completions, after create cq and sq completes in order, pqpair
is set to READY state. I/O submitted before the qpair is ready
is queued internally. Currently other transports only support
synchronous io qpair creation.
Signed-off-by: Monica Kenguva <monica.kenguva@intel.com>
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ib2f9043872bd5602274e2508cf1fe9ff4211cabb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8911
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The generic transport layer still does a busy wait, but at least
the logic in the PCIe transport now creates the queue pair
asynchronously.
Signed-off-by: Monica Kenguva <monica.kenguva@intel.com>
Change-Id: I9669ccb81a90ee0a36d3f5512bc49c503923b293
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8910
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
.ctrlr_connect_qpair
Previously this was assumed to be a synchronous process so the generic
layer transport code updated the state after .ctrlr_connect_qpair
returned. In preparation for making this support asynchronous mode,
shift that responsibility down into the individual transports.
While none of the transports actually do this asynchronously, insert a
busy wait in nvme_transport_ctrlr_connect_qpair to wait for the qpair to
exit from the CONNECTING state. None of the upper layer code can
actually correct handle a transport doing this asynchronously, so the
busy wait will cover that.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I3c1a5c115264ffcb87e549765d891d796e0c81fe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8909
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Split the NVMe controller reset into pre-init and reinit stages so
that the latter begins with a call to nvme_ctrlr_process_init(),
returning -EAGAIN if the controller is not yet ready so that a poller
can call it again later.
Signed-off-by: Jonathan Teh <jonathan.teh@mayadata.io>
Change-Id: Ia182b04e438241b139109be93f3ed858fac7f3d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8486
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Implement an async variant of spdk_nvme_ctrlr_reset(). This initial
implementation only allocates a context and returns it to the caller,
relying on the caller to poll the context to execute the existing
spdk_nvme_ctrlr_reset() implementation.
Wire up spdk_nvme_ctrlr_reset() to use this async variant to verify
that NVMe controller reset still works.
Signed-off-by: Jonathan Teh <jonathan.teh@mayadata.io>
Change-Id: I75d4b75dbf5897db452ee65286aef5a4eb839fca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8330
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We find a few files to get the size of a member of a struct. How to
do it is a little complex. So add a macro to do it will be helpful
to read the current code and develop new features.
lib/dif had used member_size() internally but Linux use sizeof_member()
as the macro. Besides, SPDK have used upper case letters for similar
macros, SPDK_CONTAINEROF() and SPDK_COUNTOF(). Hence spdk_member_size()
may be good but propose SPDK_SIZEOF_MEMBER() as the macro.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2179c845a3b75fb71aa039075cc4dfd30617b898
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8738
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
If there are completed asynchronous events that have not been notified
to the user, free them during controller shutdown to avoid memory leaks.
It can happen if an event completes before user has a chance to execute
`spdk_nvme_ctrlr_process_admin_completions()`.
Fixes#2032.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ie608bf9100342f8dfd709e070326f67335d27fed
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8740
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
NVMe bdev module manages ANA log page itself now. So NVMe driver
should disable managing ANA log page.
Add a new option disable_read_ana_log_page to struct spdk_nvme_ctrlr_opts.
Then NVMe bdev module enables it when calling spdk_nvme_connect_async().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id5249efe90a4d50763c3a7eaa1eb9572f60fbc8c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8313
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
This fix is as same as for NVMe bdev module.
If a ANA log page has two or more ANA group descriptors, the second
or later of ANA group descriptors will not be 8-bytes aligned.
Then runtime error would occur as follows:
runtime error: member access within misaligned address 0x612000000074
for type 'const struct spdk_nvme_ana_group_descriptor', which requires
8 byte alignment
nvmf_get_ana_log_page() in lib/nvmf/ctrlr.c creates a ANA log page
data and processes 8 bytes alignment correctly because we got the
same runtime error before. However, lib/nvme had been missed at that
time.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idaa610544dc5cb659c387fcd38a2b4b97cbd06e5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8398
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
The next patch will add an new controller option, disable_read_ana_log_page.
Initializing ns->ana_state to optimized before reading ANA log page
will simplify the next patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I34e56a2b454e4c02e1899f972e0ad675f2ebe2a2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8312
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Nvmf/vfio-user uses this API to map NVMe command sent from
VM from Guest Physical Address to Host Virtual Address, so
now we moved this API from the nvme library to nvmf/vfio-user
as an internal API.
UT code will be added back in coming patch.
Change-Id: I54817fc9811ccd9ddd97b3aa6762a2fce4bbdda6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8574
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Latest nvme-cli (>= 1.13) fails to issue commands towards SPDK's cuse
ctrl device, e.g.:
$ nvme get-feature /dev/spdk/nvme0 -f 1 -s 1 -l 100
nvme_cuse.c: 654:cuse_ctrlr_ioctl: *ERROR*: Unsupported IOCTL 0x4E40.
get-namespace-id: Invalid argument
The reason is because nvme-cli now also sends NVME_IOCTL_ID to the
target device to determine if it's indeed a controller or a ns. In
case kernel returns ENOTTY then nvme-cli considers the device to be
a controller. Since cuse_ctrlr_ioctl() returns EINVAL in such a case
the nvme-cli fails.
To avoid this simply replace EINVAL with ENOTTY for the ioctls that
may be not supported by ctrl or ns device.
nvme-cli commit in question:
fa2b91da74
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I29003864bc2a5c1a8906d6d01beba3d6f4e31b0e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8531
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Returning an error from this function is not useful - there
is nothing the caller can do with that information. So
change the return value to void. Also add ERRLOG and assert
if a transport actually returns a non-zero status, to
force the transport implementer (which must be an out-of-tree
transport) to make changes as necessary.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I402afec045265db178af821d25b99a6dbe066eab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8659
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It is not uncommon for delete_io_qpair to fail, for
example when a controller is hot removed. So even
if SQ or CQ deletion fails, continue with freeing
resources and report success back up the stack.
There is really nothing the application can do to
account for this failing anyways.
Upcoming patches will add additional checks to
ensure failing delete_io_qpair status never gets
propagated to the caller.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iac007c1eba30f7a8c4936b3ffb6c837f28ee12ae
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8658
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fixes#2022
If queued aborts are present when trying to fail a ctrlr
using spdk_nvme_ctrlr_fail(), then the abort command completion
will attempt to retry one of the queued aborts.
This eventually leads to a segfault that can be avoided by not
retrying any queued aborts.
Change-Id: I897dcb8809e16af8bdd39d4381ab531e1cc29822
Signed-off-by: Vasuki Manikarnike <vasuki.manikarnike@hpe.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8585
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
After correct trstring initialization, it is
overwritten with trstring value of the current
probe ctx. That leads to a problem when initiator
connects to a sbusystem with listeners of different
transport types (e.g. TCP and RDMA). If probe_ctx has
TCP type, than discovery probe initialized probe trid
with trtype=RDMA and trstring=TCP. As results, SPDK
creates TCP controller with trtype=RDMA and we hit
assert in nvme_tcp_qpair function.
Change-Id: I9355450c40c58fa55b016220703f6f7ae36b2571
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8464
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
If we continuous setup and teardown cuse session, It will teardown
uninitialized cuse session and cause segment fault, New function
cuse_session_create will do the session create operation and under
g_cuse_mtx to avoid this issue.
Signed-off-by: Weifeng Su <suweifeng1@huawei.com>
Change-Id: I2b32e81c0990ede00eea6d4ed3a7e44d534d4df3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8231
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This update will allow us to use spdk_nvme_detach_async() and
spdk_nvme_detach_poll_async() easier to aggregate multiple detachments.
Previously, we could do:
spdk_nvme_detach_async()
spdk_nvme_detach_async()
spdk_nvme_detach_async()
and then started doing spdk_nvme_detach_poll_async().
Hence aggregating multiple detachments is already supported.
After this patch, the following sequence is possible:
spdk_nvme_detach_async() = 0
spdk_nvme_detach_async() = 0
spdk_nvme_detach_async() = 0
spdk_nvme_detach_poll_async() = -EAGAIN
spdk_nvme_detach_async() = 0
spdk_nvme_detach_async() = 0
spdk_nvme_detach_poll_async() = -EAGAIN
spdk_nvme_detach_poll_async() = -EAGAIN
spdk_nvme_detach_poll_async() = -EAGAIN
spdk_nvme_detach_poll_async() = 0
The actual changes is to remove the variable polling_started from
struct spdk_nvme_detach_ctx because it is not necessary anymore.
Clarify this change via updating the header file and CHANGELOG.
Verify this change by unit test.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iebdf6c27c5304a2097b7084c315ccc99634ffa1e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8468
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add a new function spdk_nvme_detach_poll() to simplify a common
use case to continue polling until all detachments complete.
Then use the function for the common use case throughout.
Besides, usage by simple_copy application was not correct, and
fix it in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic14711cd8478bf221c0fe375301e77b395b37f26
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8509
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If the transport returns error when polling for
completions, it gets to a uint32_t and we end up
trying to resubmit all of the requests that are
currently queued. But that's not correct - if
the transport returns an error we shouldn't be
trying to resubmit requests at all.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9198e3e2d71875cc1e46e0ac928338bb983487f3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8395
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
For receving the pdu, we add the crc32c offloading by Accel framework.
Because the size of to caculate the header digest size is too small, so
we do not offload the header digest.
Change-Id: If2c827a3a4e9d19f0b6d5aa8d89b0823925bd860
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7734
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
siginfo_t is a GNU extension. SPDK (and DPDK) have
direct dependencies on GNU extensions, but it's a bit
nicer if external modules don't also need to define
_GNU_SOURCE. Currently siginfo_t parameter in the
spdk_pci_error_handler is the only thing that violates
this.
Note that DPDK also supports registering sigbus handlers,
but they take the failing address as a parameter instead
of the full siginfo_t structure. Let's adopt the same
for SPDK.
While here, remove an extra semicolon that was just after
the virtio sigbus handler function signature that was
updated in this patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I07faf11a3ac3589c637cb2196581c102286b1e68
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8333
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Using the CMB for SQs is not a standard use case.
Performance can vary widely when using CMB for SQs
and is typically not the configuration used for
benchmarking.
So let's change the default value here to 'false',
users can still opt-in by setting this option to
true in the spdk_nvme_ctrlr_opts structure prior
to attach.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iab746ba777b04152ffb92fea2a2bb923a0a0bf21
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8227
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
QEMU 6.0 by default uses a RedHat dev/vendor ID rather
than the Intel one that has always been used to date.
We need the NVME_QUIRK_MAXIMUM_PCI_ACCESS_WIDTH quirk
so that we do not use wide instructions to copy SQEs
to a virtualized CMB, since QEMU does not support
that.
The NVME_INTEL_QUIRK_NO_LOG_PAGES quirk is only needed
for devices with SPDK_PCI_VID_INTEL, so we do not need
to carry this one over to the new REDHAT entry.
Fixes issue #1986.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3d339b3525e7c6ceb792eb9d143e7a922c19344d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8226
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The NVMe driver layer will clear this log, so we don't
need to send another one in the aer callback.
Here we change the logic to compare with previous NS
state, if the NS state is same it will fail the test.
Change-Id: I6d80cb6a5f6d5eab92b8ccac601a23c19cea4003
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8175
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
And for some internal functions we need to pass controller
parameter so that we can do vtophys based on transport type.
Change-Id: I3ca4fa162ec9305f62b295ba21f7474c21edfe52
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8031
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We need to wait to process this quirk until after we
have a valid CAP register value. Before this fix,
controllers with this quirk would get their io_queue_size
always capped at 2 (min io queue size) because CAP hadn't
actually been read yet.
Fixes: f5ba8a5e (nvme: add NVME_CTRLR_STATE_READ_CAP)
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4df87b5dfb0faa21db5b4cf6fc667d80621d1691
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8211
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
The inline function can also be used in the coming submit request
function.
Change-Id: If4a5511001e6586dbce0978298beddc537f54d8b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8173
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The PCIE and VFIOUSER both can use this function, the only difference
is VFIOUSER should use IOVA=VA to do the vtophys translation, so
here we will move the function to the common PCIe layer as the first
step.
Change-Id: I699edb67a00a2fa534072fc02ac2dd4a27aba8f4
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8030
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Each time the following file
"/sys/kernel/config/nvmet/subsystems/nqn_name/namespaces/ns_id/enable"
on the target side was changed, the SPDK initiator should receive an
async event (type: SPDK_NVME_ASYNC_EVENT_TYPE_NOTICE, info:
SPDK_NVME_ASYNC_EVENT_NS_ATTR_CHANGED).
But actually not.
Since for SPDK, when target sent the non-first event, the condition
"nvmet_aen_bit_disabled(ctrl, NVME_AEN_BIT_NS_ATTR)" that prevents
target from sending event was matched.
This commit fix this issue by issuing a get_log_page cmd for each async
event received, just as the kernel initiator does.
Fixes#1825.
Signed-off-by: tyler.sun <tyler.sun@dell.com>
Change-Id: I2973470a81893456ca12e86ac390ea1de0eed62c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7107
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
If a reconnect fails, we restore the original
transport_failure_reason after we're done with
the failed reconnect. Save the original reason
in the qpair itself rather than a local variable,
to facilitate upcoming changes where connect will
be asynchronous.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I20ff43fc687a379aa5c930e17cf3ff8d730320be
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8116
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Previously we were only checking trtype==PCIE to
determine whether a controller was fabrics. This
skipped the vfio-user case. So use the new
spdk_nvme_transport_id_is_fabrics() API instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I81f26853f44b1c47522ce6354e5aa4a905796bd0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8089
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Nvme-cli submits a RESCAN IOCTL after a format command to
update any information that may have changed during the
format, such as LBA Format. This patch adds support
for RESCAN by executing nvme_ctrlr_update_namespaces to
update the controller information.
Fixes: #1964
Change-Id: I9f03e00a7f39339947ff02390f69ce806e1cfa0e
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8146
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A Security Receive command with the Security Protocol field cleared to
00h shall return information about the security protocols supported by
the controller, so we can check the TCG security protocol is supported
or not before sending it.
Fix issue #1961.
Change-Id: Id061defe45db981b276e2794fd0b59f8db70b7f4
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8083
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Initialize ANA state of each namespace to optimized regardless of
whether ANA is supported or not. This will simplify the code to get
the optimal I/O path because we do not have to care if the namespace
supports ANA.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I24dfe08674af398671de6528b884e9d82409eeae
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7890
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We map the SPDK_NVME_TRANSPORT_* values directly to
the NVMe-oF trtype values. Since PCIe isn't
Fabrics, we choose 256 which is outside of the
8-bit trtype range of values.
So we can just check if trtype >= 256 to determine
if the trid is for fabrics or not. This is
preferable to checking PCIE || VFIOUSER in case
additional non-fabrics transport types are added
in the future.
I considered taking a trid as the parameter instead,
but went this route since it is consistent with
the existing spdk_nvme_ctrlr_is_discovery().
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib62ff4d30549b2324486c81f2dce67f0f1741e9b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8077
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Connect the adminq as part of controller initialization
instead of controller construction.
We never actually 'connected' the adminq for
PCIe or vfio-user transports, since its a nop.
But their connect_qpair transport ops function
is also a nop for the adminq, so it's fine to
generically connect the adminq across all transports.
Note that we cannot read registers (cc or csts)
during controller initialization now until after
the adminq has been connected since reading fabrics
registers depends on a connected adminq. This gets
special cased for now, but eventually reading
cc and csts will need to be part of the state machine
itself to make it asynchronous.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia5566d7c549d78d24b94ea253df51e697da6237f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8079
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
According to NVMe-oF 1.1 spec, it is not a fatal error.
So according to Figure 126 in NVMe Base specification,
we should return "Transient Transport Error".
Change-Id: I601304ae2bb24508882fb1ec8c7e53ec587ab515
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7795
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This ensures the discovery ctrlr initialization is
done the same as normal ctrlrs. This will be
critical as we make the driver fully asynchronous.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I33c4fd7c82d241c30e7adb89abe79b8088c8776a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8090
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Read CAP (Capabilities) register as part of controller
initialization instead of controller construction.
For now, still read CAP in the pcie and vfio-user
controller construction, since they need the
drstd (doorbell stride) to construct the admin
queue.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I000fe880f2ec0d6de1d565c883d7ea0ae1ac2c81
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8078
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Read VS (Version) register as part of controller
initialization instead of controller construction.
This prepares for upcoming changes to make
controller attach fully asynchronous. Since reading
fabrics registers is an asynchronous operation, it
will be easier to read the VS register as part of
controller initialization which operates as an
asynchronous state machine.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I771386dbdf5902633e0d9f91b3b20be98f26fdc3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8076
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
We're going to be adding some new states (READ_CAP
and READ_VS) in future patches, that we want to
come before the current "INIT" state.
So we will simply make "INIT" have the same
value as this new NVME_CTRLR_STATE_CHECK_EN state
for now. That means existing code won't have to
change later once we add new states that come
before CHECK_EN.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I07ca92e28ab1cd8d838cdef5c3ff36ba80a224bf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8075
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Since we will reuse send_pdu for other purpose in the next
patch.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Iee5166131b70a25bc13aaa847bfc9066231f31a9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8028
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
For nvme/tcp connection, we use the synced manner
if the qpair is not fully connected. Thus without
the check, we will stuck here. And this patch
fixes this issue.
Change-Id: I72815bf5b4c0b31c4866bc1b9034b0e42b81d3f1
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8025
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
The header size is very small, which does not have too much value to
offload such calculation by hardware.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Iaa82f39312df7eef3282325a33677ea41ab735ab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8011
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch changes the order of IDENTIFY_ACTIVE_NS and CONSTRUCT_NS
controller states. It is required to further improve memory management
for namespaces by allocating memory only for active ones.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: Ie540442b1bd9e897afcbaa4319c139109dd0c515
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6503
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previous implementation allocated memory just once at the beginning of
active NS list retrieval procedure. It allocated memory for maximum
possible number of active namespaces, i.e. 'cdata.nn'.
This patch changes allocation logic. One page is allocated at the
beginning. If more is needed, reallocation is done with one more
page.
This patch also removes SPDK_MALLOC_DMA flag from allocation since we
don't do RDMA directly into this buffer.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: Iaa80c4d70c54daaf71dcbf755c63a01a1d83b772
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6502
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Nvme-cli uses NVME_IOCTL_IO_CMDs for "io-passthru"
commands to cuse devices. This patch adds support
for that IOCTL.
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Change-Id: I20e0ac91ba08fce91bc5da1f4a1e454058cdd1e7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7741
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The nvme cuse IOCTLs are actually creating passthru commands
that can be either IO passthru commands or admin commands.
Renaming the routines to correctly reflect that should limit
the confusion when reading the code. Passthru commands that
are admin commands will go to the spdk_nvme_ctrlr_cmd_admin_raw
interface and passthru commands that are IO will be sent to the
spdk_nvme_ctrlr_cmd_io_raw interface.
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Change-Id: I8d427fe8b5f503fdb2d193236c77d410d5b13886
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7740
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Nvme-cli uses BLKSSZGET so support needs to be added for
nvme cuse devices.
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Change-Id: Ic8316713b2d017c8ff32a225efff6bcb95842799
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7708
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It is useful to have debug log information in the nvme_cuse
path when debugging IOCTls and flows.
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Change-Id: Ifef1bb82c96438e2fcbb9ad2fafe3f3eb66bed51
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7707
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The purpose is to prepared for implement the async crc32 caculation
in the future patch.
Change-Id: Ia75f28154c49f08b527d48c63b9da79a6bdfede8
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7794
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is prepared for using the hardware offloading
engine in accel framework. And some fields in nvme_tcp_pdu
needs to be DMA addressable.
Change-Id: I75325e2cd7ff25fe938bea0ac9489a5027e3e0e9
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7770
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
When payload_size is 0, we may get wrong cdw10 because of the calculate: 0 - 1,
add value check to fix value inversion bug.
Signed-off-by: sunshihao <sunshihao@huawei.com>
Change-Id: I3bcd38ba981c854ff917282341d32aac47d22b76
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7443
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We have seen that dptr was not alligned to 4k using cuse. Added allignment of data in cuse ctx to 4k same as it is done in nvme_allocate_request_user_copy
Signed-off-by: jwyka <jakub.wyka@intel.com>
Change-Id: Ic5c2482eae20d64ba467016eb61f5255467f70a9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7453
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI
spdk_vtophys() takes a mapping_length parameter, so
it can return the length for which the returned
virtual address is valid.
But spdk_vtophys() will only return the max
between the valid length and the input mapping_length
parameter.
So the nvme SGL building code for contiguous buffers
was broken, since it would only set the mapping_length
once, before the loop started. Worst case, if a buffer
started just before (maybe 256 bytes) before a huge page
boundary, each time through the loop we would create
a new SGL for only 256 bytes at a time, very quickly
running out of SGL entries for a large buffer.
Fixes#1852.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib1000d8b130e8e4bfeacccd6e60f8109428dfc1e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7659
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The IDENTIFY_CNS quirk was applied as part of QEMU
OCSSD handling in commit 6442451b. But it was applied
not only to the OCSSD dev ID, but also the dev ID
for non-OCSSD NVMe controllers.
Starting with QEMU 5.2, QEMU will allocate a default
256 namespaces, but only some are active (associated
with the backing disks specified by the user). QEMU
supports IDENTIFY_CNS, but since this quirk was set,
we wouldn't send a real IDENTIFY_CNS and instead
would just populate a fake list where all namespaces
were considered active. This causes breakage in
a few places - mainly where we iterate through
the active namespaces, and then are surprised that
calling spdk_nvme_ns_is_active() returns false.
It was also breaking bdev_nvme_attach_controller RPC,
since by default we can only support returning 128
names, but since all of the namespaces were deemed
active, it was trying to return 256.
Fixes#1916.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4fdd27e0e36f0ac07a95f9f29aa83357e8505a45
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7658
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The io_msg qpair is allocated and managed by the
primary process, so don't try polling it from
secondary processes.
This fixes a bug where an SPDK target has configured
cuse, and we try to run fio (for example) as a
secondary process.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I48e2b89597196ce2ba1fc02ea3a7c76c5a33281a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7482
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The P55XX serial SSDs can support dlfeat.read_value in the identify
namespace data structure, we don't need to add this quirk for it,
just remove it.
Change-Id: I165d89085e246a570e80dbaf05f41dc331b93f0c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7526
Community-CI: Broadcom CI
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When the format command is issued, the kioxia drives responds with "NS Attr change" notices.
In the callback function of the notice, the CQ Head Doorbell is updated twice with the same
value while issuing the Active NS list & identify NS commands.
Fixes: #1701
Signed-off-by: G.Balaji <gbalajieie@gmail.com>
Change-Id: I8cc80fba0a226c22753e605ef3129602a9313ce7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7149
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also update the UT.
Change-Id: I6086bf4cafca8a917a467490955d7df0ba8930d5
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7495
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previously we can only remap NVMe command using PRP, now we add
the SGL support.
Change-Id: Iec352d858a07bdd3d5f261336d6fa1167ba7aa79
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7279
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The API `spdk_nvme_map_prps` is used in nvmf/vfio-user to
remap VM's NVMe command data buffer to local virtual address,
and for command using PRP, there maybe multiple pages, when
parsing the PRP list to local IOVs, we need a parameter to check
that the maximum number of vectors can't exceed the IOVs, this API
can't meet the requirement, while here, we add a new API `spdk_nvme_map_cmd`
and with a new parameter `max_iovcnt` to fix this case, and it can
also cover the command using SGL in the coming patches.
Change-Id: I71063524bed16ee3434103867a556d3741e55326
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7278
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change spdk_nvme_map_prps to a internal fucntion with
a new parameter `max_iovcnt` to protect the IOVs. Also
for the purpose to keep API compatibility, we still leave
the API here.
Change-Id: I9a638beb87aab20bba5f8a4fa0a9396110d56aff
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7335
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If the qpair is part of a poll group, the socket will get
flushed as part of polling that group already. We only need
to explicitly flush to handle the case where the qpair is
not in a poll group.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ib2a510b6d26d1622950437d81e0a40f6b15d6b54
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7049
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
There was a fix for this that went into the posix layer, but the
underlying problem is the logic in the nvme/tcp transport. Attempt to
fix that instead.
Change-Id: I04dd850bb201641d441c8c1f88c7bb8ba1d09e58
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6751
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This prepares for an upcoming patch to fix issue #1701 which
requires handling async events outside of the check
completions loop.
Fixes: #1701
Signed-off-by: G.Balaji <gbalajieie@gmail.com>
Change-Id: I4985d814903143511383172b1a443580db33a78f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7416
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Change-Id: I2e47b148209ce4c232dbdc5f20c90548be995e1a
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7334
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
NVME_MAX_PRP_LIST_ENTRIES has changed over time, so let's
just remove the reference to the exact value here. Also
explain a bit more why the max size isn't
(NUM_ENTRIES + 1) * page_size.
While here, do a small whitespace cleanup as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib75813788abdd3dbb43192f9fdc27f99b33aeadf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7328
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Check if qpair has a poll group during the connect process,
use poll group's statistics or allocate own structure per
qpair. That is done due to not all applications use poll
groups and we want to avoid "if (qpair->group)"
conditions in data path.
Admin qpair always allocates its own statistics
structure but the statistics are not reported
since this qpair is not attached to a poll group.
Statistics are reported by spdk_nvme_perf tool
if --transport-stats and in bdev_nvme_transport_statistics
RPC method.
Change-Id: I58765be161491fe394968ea65ea22db1478b219a
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6304
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
These are interface functions that can be used by
an application e.g. spdk_nvme_perf or bdev_nvme
library. The next patches will add usage of these
functions.
Change-Id: I33b88e0e713c2ea5967f9241885e3257c5070577
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6300
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The new 2 API function allow to get and free stats
per poll group. New function to get transport name
have been added to report not only transport type but
also the name.
For now only RDMA transport reports statistics,
other transports will be added later.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I2824cb474fde5fa859cf8196dabac2c48c05709c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6299
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
New statistics include number of poller calls,
number of idle polls and total number of completions.
These statistics allow to estimate % of idle polls
and the number of completions per poll.
Since nvme_rdma_cq_process_completions function
returns number of completed NVMF requests and each
NVMF request consumes 2 RDMA completions (send+recv),
this function was extended to return the number of
RDMA completions.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ifdc1e2e467f645adb5d66d39ff2a379e161fbd77
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6298
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
These statistics allow to estimate WRs batching
efficiency. The number of send WRs equals the total
number of submitted NVME commands.
Change-Id: I96c9836cd6b9070cf5f62e43b4d2738506866e94
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6297
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The hotplug lib can be used for pcie devices
such as nvme, virtio_blk and virtio scsi.
For the sigbus handler, there is only one in a
process and it should handle all the devices.
And align nvme to the hotplug lib
Add the ADD uevent support for allowing the
device hotplug.
Change-Id: I82cd3b4af38ca24cee8b041a215a85c4a69e60f7
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5653
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Introduce new utilities NVME_CTRLR_ERRLOG, NVME_CTRLR_WARNLOG and so
on to output the ctrlr's identification at different log levels.
For RDMA and TCP, the subnqn will be output and for PCIe and custom,
the traddr will be ouptput.
Change-Id: I81a112463bf752999aa1fe4e0c867d88e09a2f64
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7057
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Vasuki Manikarnike <vasuki.manikarnike@hpe.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When a request is submitted, it may have incorrect iov
alignment that doesn't fit PRP requirements. In the
current version an internal function fails such a request
and returns a NULL pointer. This is mapped to -ENOMEM
error which is returned to generic bdev layer where
such a request is queued in a "nomem_io" queue and
later can be resubmitted. That is incorrect and such
a request must be completed immediately. To fail the
request, we need to differentiate between -ENOMEM and
other cases, so we pass a pointer to a result to
local nvme functions
Change-Id: I7120d49114d801497a71fca5a23b172732d088de
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7036
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function will be used the next patch, current
behaviour remains unchanged
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ie74c7395f67a08b0cac018eb5114f358a6b583cb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7092
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The specification for Maximum Data Transfer Size (MDTS) says this field
should include the length of metadata, if metadata is interleaved with the
logical block data. However, some drives can support MDTS without counting
the interleaved metadata, so for this case SPDK will only use data length
without interleaved metadata length.
Change-Id: I29920a25885699e2689be043b87122367be0e416
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6813
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Remove the polling group check. Because at this moment,
the qpair is not added into a polling group. If we do
not remove it, we will never enable zcopy feature for
I/O qpair.
And in sock implementmentation, we already fixed the zero copy
handling if a socket is not in a polling group. See
posix_sock_flush function. So we can fix this issue if we directly
remove this check.
Reported by: Aleksey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I969936c4b6c7f13cbfa4d6eb479010c53f3e384a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7056
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
This API has been deprecated since SPDK 20.07,
see commit (b2947f52).
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Idb45906c81ea5682c6a67def0265910266d861b5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6629
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
This patch refactor the pdu sending logic with the async manner,
then if the group contains the accel engine, we can use it.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I2d669c0a3255d7a8898441e406906add2f3a3556
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6759
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Purpose: To setup an accelerated function callback
for created spdk_nvme_poll_group. In this patch,
we just create the interface. The real usage of this
call back will be provided in the other patch.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I0d936aa4eba4dbfcc0137942156b9f2919eb5b78
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6758
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
It is invalid to try to delete a NULL qpair, so do
not check for it in nvme_tcp_ctrlr_delete_io_qpair and
return an error when NULL. Just change it to an
assert instead. This makes it consistent with pcie
and rdma.
While here, add an assert in rdma as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic2f76deecb21b78749dac85e33fb1fa0d14a1239
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6917
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
The shadow registers need to be zero when the qpair is
created. This happens automatically when a given qid
is used for the first time, since the page is allocated
with zmalloc. But if a qid is reused, we need to make
sure its shadow registers are cleared *before* we create
the qpair again with the same qid.
So clear the registers in nvme_pcie_ctrlr_delete_io_qpair,
just after the cq is deleted.
Fixes issue #1795.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I08c30d1ea248559a01b802cd132dd57199b491b5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6752
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Previously the callback parameter for this function is NULL, this will
cause segment fault, so pass the correct parameter here.
Fix#1817
Change-Id: Ie768b7bf4a72862d16a44742ab3032803d0939a2
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6690
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Community-CI: Mellanox Build Bot
For the following nvme controller statemachine states:
NVME_CTRLR_STATE_IDENTIFY_NS
NVME_CTRLR_STATE_IDENTIFY_ID_DESCS
NVME_CTRLR_STATE_IDENTIFY_NS_IOCS_SPECIFIC
The statemachine can either:
- Jump to succeeding state
- If active ns list is empty, jump directly to NVME_CTRLR_STATE_CONFIGURE_AER
- In the unlikely case if NVMe completion error, jump to NVME_CTRLR_STATE_ERROR
Simply this such that we either:
- Jump to succeeding state
- In the unlikely case if NVMe completion error, jump to NVME_CTRLR_STATE_ERROR
This will help to reduce the complexity of the nvme controller statemachine,
especially considering that there are new additional states
(NVME_CTRLR_STATE_IDENTIFY_NS_DIRECTIVE and
NVME_CTRLR_STATE_CONFIGURE_NS_STREAMS) currently on review that would continue
with the bad habit of having three possible jump states instead of just two.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I3242052b1108afcd8adbe6d0378b1358fef58ec8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6521
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: sunshihao <sunshihao@huawei.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Purpose: To get the optimal group, we need the socket information.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I17b048a402fbf002307dd225f64b20a9f876d642
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3324
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
For a SGL using PRPs, there is always an alignment check of the start
address in the beginning of the loop. This is stored in start_valid.
If the start is indeed valid, we might fetch a new SGE,
and then perform a second alignment check on this new SGE.
However, this second alignment check is done unconditionally,
meaning that for the last SGE in a request, we check if the
same start address is aligned twice.
Only perform the second alignment check if we actually fetched
a new SGE.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I9df8038c650b0879f838d1d9d895e8dd7172840d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6493
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add a function to get the number of max active zones for a zoned
namespace.
The value inside the identify namespace struct is a 0's based value,
where 0xffffffff means unlimited.
If unlimited, the addition will overflow and return 0,
which is the intended value to represent unlimited for this API.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ia09e3db157ca0afadbd3ca4032eedd7bcd88248c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6443
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: sunshihao <sunshihao@huawei.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add a function to get the number of max open zones for a zoned
namespace.
The value inside the identify namespace struct is a 0's based value,
where 0xffffffff means unlimited.
If unlimited, the addition will overflow and return 0,
which is the intended value to represent unlimited for this API.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I4223146bc1ddf90486892a0af5fe5ce006dc5fd3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6442
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: sunshihao <sunshihao@huawei.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We already have support for spdk_nvme_zns_zone_append(),
add support for spdk_nvme_zns_zone_appendv() (zone append with
NVME_PAYLOAD_TYPE_SGL).
_nvme_ns_cmd_rw() currently performs verification of the SGL,
if the parameter check_sgl is set. This parameter is set for all
calls with payload of type NVME_PAYLOAD_TYPE_SGL.
In order to be able to perform the same check_sgl verfication on
zone append vectors, we need to refactor _nvme_ns_cmd_rw() a bit.
Setting check_sgl ensures that _nvme_ns_cmd_split_request_sgl() or
_nvme_ns_cmd_split_request_prp() gets called.
These functions will split an oversized I/O into several different
requests. However, they also iterate the SGE entries, verifies that
the total payload size, total SGE entries is not too many, and that
buffers are properly aligned. A proper request will not get split.
For zone append, splitting a request into several is not allowed,
however, we still want the verification part to be done, such that
(e.g.) a non first/last SGE which is not page aligned, will cause
the whole request to be rejected.
(In the case of spdk_nvme_ns_cmd_write(), a non first/last SGE which
is not page aligned will instead cause the request to be split.)
An alternative would be to try to rip out the verification part from
_nvme_ns_cmd_split_request_sgl() and _nvme_ns_cmd_split_request_prp().
However, that is non-trivial, and would most likely end up with a lot
of duplicated code, which would easily get out of sync.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I2728acdcadeb70b1f0ed628704df19e75d14dcca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6248
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use the new function spdk_nvme_zns_ns_get_zone_size_sectors() where
it is appropriate (in comparison to the existing
spdk_nvme_zns_ns_get_zone_size() variant).
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ic929ffbc5a1f4a16ba6719a985c05ae625caed46
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6417
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Sometimes it is more optimal to get the zone size in number
of sectors, instead of in number of bytes.
Therefore, add a new spdk_nvme_zns_ns_get_zone_size_sectors()
function to get zone size in number of sectors.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I0fe67e00a3d74dd27acfc895ae97448d995b89a3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6416
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Identify application prints the PMR details if it is supported
Signed-off-by: Krishna Kanth Reddy <krish.reddy@samsung.com>
Change-Id: Iaba4c15e18e1402035b11a34b2defe8078855751
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6209
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There is a special case when using 8-byte metadata + PI + PRACT
where no metadata is transferred to/from controller.
Since _nvme_ns_cmd_rw() already calculates the proper sector size
using _nvme_get_host_buffer_sector_size(), which takes PRACT into
account, change the sectors_per_max_io calculation to also take
PRACT into account.
This will avoid certain requests that don't need splitting getting
split.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I8d450d37c2458453701189f0e0eca4b8fe71173b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6247
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Zone append commands cannot be split.
_nvme_ns_cmd_rw() should never cause a NVME_PAYLOAD_TYPE_CONTIG
zone append request to be split.
This is currently true, but add an assert to make sure that
any refactoring to _nvme_ns_cmd_rw() does not break this promise.
Also add error handling, since release builds are built with
asserts disabled.
Follow-up patches will refactor _nvme_ns_cmd_rw().
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I5fd2440c4c9d6bd8d56f30354b208a9047b64729
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6246
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
This function allows applications to specify whether
they wish to allow probing a newly attached NVMe
PCIe SSD.
The env layer will only even probe devices that have
been allowed. By default, this is all devices, but
if the user has specified some list of
allowed PCI addresses (via spdk_env_opts pci_allowed)
then newly attached PCIe devices are implicitly not
allowed. This API allows applications to add
device addresses to the allowed list after the
application has started.
This API will be useful for use cases where multiple
SPDK processes are running on one server, and assignment
of PCIe SSDs to those processes are based on some function
of the SSD's PCIe address.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I919bc267f2ad9130ab5c875ff760a301028b047e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6184
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Fixes#1777.
When a qpair cannot be allocated because the transport connection fails,
the qpair was freed without unlinking it from the other structures.
This was leading to a segfault when attempting to create and free other
qpairs.
Also added a unit test to cover this case.
Change-Id: I74b78d1847f90117248b07203b43a11ff5cfa5d6
Signed-off-by: Vasuki Manikarnike <vasuki.manikarnike@hpe.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6272
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If rdma_qp_disconnect is not correctly sent out, we will not wait
for the event.
Change-Id: I99701e421dc93909d481ccf35e9bfd8004e60da8
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6163
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Add the real support in nvme tcp transport.
Change-Id: I2aa9b0284d6fe009925e67f602a055e787f77987
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5734
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
