This removes the strict dependency on the SPDK
event framework.
Change-Id: Ie6b6f9585d09ab1df0f25bf33d53e7cdecd83faa
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365281
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Much like bdev modules inside the bdev directory,
add a subsystems directory inside of event. The subsystem
specific code for the bdev library is placed in to
a separate library in that directory, breaking the
strict dependency of the bdev library on the event subsystem
code.
Change-Id: I255941b823a9ec3e2d62f22a586414949d8ff5ad
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365055
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now that virtual mode namespaces can be chosen arbitrarily, there can be
holes in the ns_list. Make sure all of the virtual mode code paths are
prepared to handle these inactive but valid NSIDs.
Change-Id: I0d70fd9dae37a29a8358e1d38dcc6cac3237fd9a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/365717
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This also requires vbdev modules to call spdk_bdev_reset
explicitly on the base bdev, rather than just resubmitting
the original reset bdev_io.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie33d506f68506096306c9f0a9ff5e11141578b15
Reviewed-on: https://review.gerrithub.io/365712
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
We can do all of the completion work first, and then
make the decision at the very end on whether to
defer the callback or not.
This also removes the bdev_io defer_callback member -
we no longer need it since we now only defer the
callback itself, instead of deferring the full
execution of the spdk_bdev_io_complete() routine.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3285e34d2fbce34d4254dca2119561ff825ee9e8
Reviewed-on: https://review.gerrithub.io/365711
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In this patch, spdk_app_init will be merged into
spdk_app_start.
Due to this change, we need to change event_perf
to use spdk_app_start, since we cannot use spdk_app_init
anymore. So the related changes for event_perf is to
make it work with reactor framework.
Change-Id: Id67edf209fd628cca361a499068c93aeedfe6167
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/364153
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In this patch, we also update perf and identify
examples. If there is no local nvme device info
parsing, we will set dpdk initialization with no-pci
choice.
Change-Id: I58b2d291b7b53894aeb194a16798ff1c72cf25b4
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/365361
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch shows how to use the spdk_mock library which now only
consists of --wrap capability for a few functions.
Next will be a patch that provides a generic mock capability to
use either the --wrap feature or a combination of globals and
stubs to make adding more UT easier wrt mocking. After that is
in place nvme_ut.c will be updated to use the new library for
all mocking.
Change-Id: I1a6ffb722da043bb70bd4cfe1afa7c5e39a0fccb
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/365074
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Sync the spec header with the major changes for NVMe 1.3.
Some of the added fields may have been added in previous
versions of the spec.
Change-Id: Ia50a52f5192cf450bb5cc2d18fcc1f92ebce7f77
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/362046
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia45876fb6f0eefd987cdb36521ecb591ef1f9499
Reviewed-on: https://review.gerrithub.io/365669
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This ensures a reset is completed after any I/O completions
that may have been deferred.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9efe5c07435371ff8c8e0c826349e9349ade02f3
Reviewed-on: https://review.gerrithub.io/365663
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia0083365b2da63cb38aebb9f7bbc02f4dfd1ae94
Reviewed-on: https://review.gerrithub.io/365263
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is faster than spdk_get_thread(), which iterates over all of the
threads under a lock until it finds the current one.
Change-Id: I957a68438efb5b7d632d2b9b1b567fed7714e02a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/365079
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch doesn't use it yet but sets up the ability to so that
upcoming unit test pathces can. The next patch will include use
of wrap in one nvme UT and then following that the wrap and
today's use of globally controlled stubs will be morphed into a
simple mock type capability for spdk unit tests.
Change-Id: I252160266f0b5c76e50fd213cb3e1686d48b9d0e
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/363441
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It is not actually useful to be immediately returned
a handle to the bdev_io. There isn't anything valid
that the user can do with it at that point. Instead,
return an integer error code.
Change-Id: Iffa9a8dc5b2eefab57e3cc1f68919985431d17d1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/364137
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I3e2ae6cc9465ee62ea506e8803fd70d9b50477db
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/364119
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Theres no need to have vhost SCSI (and incoming vhost block) structures
available in public API. Generic spdk_vhost_dev might be used to
communicate with backedns. Backends are responsible to check if type of
passed vdev valid.
Change-Id: I850a1cc661166ee146d513b0069bb40edc9a761a
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/363581
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ied778fc41ddc5ff7563408eccafc0e0654287b19
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/363608
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This is only needed inside of bdev modules.
Change-Id: Ia532a0bd40ead5ff08a0e352f9aeb60f3898245b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/364118
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: I4d281be99553629563026cc4f9ab890d0a97986c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/364115
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Dynamically allocate bdev names to remove the arbitrary 16-character
name length limit.
All of the existing product_names are constant strings, so those can
just use string literals instead of a copy per bdev.
Change-Id: I3280da67a4fcf2e4ec8ee8193362ca1b96a9c0cb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363601
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch prepares support for 64 bit values that will be used in lvol bdev.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ib5c8a438135e246c69887c4775c9ea6f0fa6eb1b
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/363344
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
This function is no longer used for integer parsing, and it does not
work in locales with decimal separators other than '.', which is
required to be the decimal separator for JSON numbers.
Change-Id: I8e97e15cc2699e647652f83b71676c11d32d29ce
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/364134
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Support passthru for NVMe admin commands.
Change-Id: If926f2ecabb078a553158f544c10a92452dbdb39
Signed-off-by: Edward Yang <eyang@us.fujitsu.com>
Reviewed-on: https://review.gerrithub.io/363294
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I05bb8294471bac3f9ecc4744e28d7d40e57e5364
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/362622
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
There is now just one type of reset, which is equivalent
to a HARD reset previously.
Change-Id: I955b219cbc5c25793d97de1cc003b30ae99313ac
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/362615
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I61b6579e8698d16e5a8ab74d304af9ea53f9dce4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363307
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ic1b7b1b6497dbae5ceda9bb91f9d4d2037b7243f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363301
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I9a1222e41220f0400936caaeabc6453d83f142ae
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363300
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_nvmf_subsystem_exists(nqn) is exactly equivalent to
spdk_nvmf_find_subsystem(nqn) != NULL.
Change-Id: Icafa43166c99d1364b49cef30a5ade4b6625bcd5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363299
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I02a44c3790830b3918dca418c6bb85e82ddac273
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363298
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Only function definitions should be split between the return type and
the function name, not declarations.
Change-Id: Iff67e3265dd82a8929ca388fd2dcd2f6ee52166e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363297
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This structure is not part of the public API and shouldn't be in
spdk/nvmf.h.
Change-Id: I29fbb269d3ab77cd9fa9908726abc7c7a4c6d8c1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363296
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch adds property of transport protocol id to spdk_scsi_dev.
This allows to change it depending on which appliation is using
the device. Previously only iSCSI was used for all.
Setting protocol id is done at the time when device is added to
vhost controller (vhost) or target node (iSCSI).
Please note that for SPDK vhost SAS protocol id is used,
as that is what kernel vhost reports as well.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I455a856c5d7796a749b6650fee0218d526e094ed
Reviewed-on: https://review.gerrithub.io/362864
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
SPDK subysystem initialization now is async,
so we need to guarantee the initialization is done,
then call event composed of start_fn passed by user
in spdk_app_start.
Change-Id: Icc790cbb3da04c1063204938b79140c4218986e4
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/362654
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: I93684a004e2ae276734edbb4767b5ba1bac3dd48
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/362111
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The next patch will make bdev modules init
in the async manner.
Change-Id: I4909c80510d786daf54003b99a5925428cf37373
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/362110
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
- rename spdk_malloc_socket to spdk_dma_malloc_socket
- rename spdk_malloc to spdk_dma_malloc
- rename spdk_zmalloc to spdk_dma_zmalloc
- rename spdk_realloc to spdk_dma_realloc
- rename spdk_free to spdk_dma_free
Change-Id: I52a11b7a4243281f9c56f503e826fd7c4a1fd883
Signed-off-by: John Meneghini <johnm@netapp.com>
Reviewed-on: https://review.gerrithub.io/362604
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This allows virtual blockdevs to inspect newly-added bdevs and
potentially insert themselves automatically.
Change-Id: If567a950d753e5f08861a5de22a2e1350376e50f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/362077
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For a given I/O device, call a user function on the correct
thread for each channel.
Change-Id: I568a443184ac834c80c5e36b80aa9b6f8bb0ac99
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/362256
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When a thread is registered, the user must provide
a function pointer that can pass a message to that thread.
Change-Id: I743b5e0d6e3b5118c0a68d2fcedbccdd6fb237f9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/362067
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This will be used in the future to pass a message
to any given thread.
Change-Id: I3be5fe66244e360b7667427647fd8fdede110930
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/362066
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This wasn't used anywhere and we currently believe there
are superior software-only techniques for controlling
quality of service.
Change-Id: Icdadd5870ed0629b338c307d2619bbc242c3e7a3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/362065
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Implemented vhost abstraction layer in preparations for vhost-blk.
Generalized vhost interface and separated vhost-scsi code.
Code placement:
vhost.h
* vhost_startup() & shutdown()
* public generic controller API
vhost_internal.h
* includes rte_vhost.h from DPDK
* struct spdk_vhost_dev (it has to be inherited by vhost_scsi)
* vhost_dev management
* register/unregister() to be used in new_device()/destroy_device()
* construct/destruct() to be used on permanent creation/destruction.
* reactor core management
vhost_scsi.h
* spdk_vhost_scsi_dev management
* reading VhostScsi section of vhost config file
* creating/removing controllers
* adding/removing devices to controllers
vhost_scsi.c
* virtio scsi logic
* new_device(), destroy_device()
Change-Id: Iaf661b14eba034593bef24853c525935d9b18e46
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/361963
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Moved controller-related variables from spdk_vhost_scsi_controller to
spdk_vhost_dev. Generalized vhost to operate on non scsi-specific
controller struct.
Now spdk_vhost_scsi_dev contains direct spdk_vhost_dev field instead
of a pointer. This means there is no more allocation/deallocation
on poller start/stop.
Change-Id: I99739d58833ee023a75cb530cc80294e02f28090
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/361880
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
It is unused an misleading.
Change-Id: Idb2e3c1b244dfb4aa99bcecee8a3dba6efbc33aa
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/362335
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This case will be used in incoming vhost patches.
Change-Id: I62d569c01e9b8bf25c9293dff827d1b4406cea04
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/362334
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This ensures that all spdk_bdev_io structures now have
an attached channel, simplifying some future work around
things like counting the number of outstanding IOs for
a given channel (which otherwise would have had to
account specially for resets).
Reset semantics are still that they affect the entire bdev
and not just the channel it was submitted on.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8aad21a88faacecfd94bdba350059528eb62c390
Reviewed-on: https://review.gerrithub.io/362251
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The user should not see the bdev_io status directly; the NVMe and SCSI
error code wrappers provide the ability to translate to the desired
format regardless of what kind of error is stored inside the bdev_io.
Replace the spdk_bdev_io_completion_cb status parameter with a bool
simply indiciating whether the I/O completed successfully.
Change-Id: Iad18c2dac4374112c41b7a656154ed3ae1a68569
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/362047
Tested-by: <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is no longer used anywhere. For the places where we previously
used it, we've since found alternate solutions that do not
require it.
Change-Id: I738a80b95ef50348ce1c14969a3812b0a625b3fd
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/362064
Tested-by: <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows us to allocate different size channels and
not require the unique flag.
Change-Id: I4b1ffd244b60e9e9ab06f9ab4da8161ab57e1169
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/361668
Tested-by: <sys_sgsw@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
An ECN to the NVMe 1.3 specification has clarified that the NQN may
contain 223 bytes before the null terminator. Make all of our NQN
length checks consistently enforce this behavior.
Change-Id: Iebfd57d11abea64964c7a6ad9d886e40efa243c3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Separate the maximum metadata operations from the
maximum channel operations.
Change-Id: I1bbd440ab094a2a2e19c9a5b71724ac91ba88e42
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This will need to be configured globally for all channels.
Change-Id: I773252f220373617f8d09d1f24243db8095cf8a4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Specify the function as a parameter to spdk_scsi_dev_queue_mgmt_task.
This makes the API clearer by making it explicit that the management
function is required for management tasks.
Change-Id: I92d893aadb6faebea81dd79729894d2c2fddf088
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Added new rpc commands together with underlying vhost API and tests.
Change-Id: Ib9c6a530d0909193ea5115aaac4920c44f39613c
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Move some of the fields in spdk_bdev_io (the layout of which is no
longer public API) to put related fields together and improve struct
packing.
Change-Id: I0ca5d9441b00c65703c35391d125059eaa4bcee3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The SCSI library already provides a callback when the task is released
(free_fn), so the user can update their own task counter.
Change-Id: I7fb13f6fff66dbba2315fd03fb06e49f793be123
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The task free callback function is required, so make its assignment part
of task construction.
Change-Id: I2f5fdf73b064653ee85b4e7961cb1653a0a4107d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make the buffer allocation work for all types of
commands, not just read.
Change-Id: I72d8f67a724566630e7c4a74759fcb08449f7de4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Blockdevs already indicate support for unmap via
spdk_bdev_io_type_supported(bdev, SPDK_BDEV_IO_TYPE_UNMAP).
Change-Id: I634f27a281fd900bb3a6da2e4ff8a74e43579578
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
We plan to use these buffers for more than just reads.
Change-Id: I8fa6cb432a6cfe4406fbf240cd3aa2ae4ab5f3d5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The user can get there via the bdev, so this didn't
have a purpose.
Change-Id: I7f85bb71d5ee238d37ba3624d0ac68a161c95e49
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Scan the source for POSIX includes outside of the
allowed locations in check_format.sh. This only
tests for POSIX headers - not Linux Standards Base.
Also, fix one bug that was caught by this addition.
Change-Id: Ib0ca93fe6ac552dc49d95b27b4803e40282027e8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This is the first step toward isolating standard C and POSIX headers
into a single replaceable header file.
Change-Id: I527297f5e7260b01103018ad3429922962ee9add
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is currently getting declared inside struct spdk_bdev, which will
be removed.
Change-Id: I5136a19c520bd9a6fff27da1334c1bc972cf43fc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The SCSI layer was not using the task ID for anything; the iSCSI layer
was using it to store the task tag, so move it there and rename it to
"tag" to make its purpose clear.
Change-Id: Ibda4f4e215056116b9be4a3a0264f98bc4c29535
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The SCSI layer doesn't use subtasks; these are an iSCSI layer concept.
Change-Id: I83871f02362f10fd4ecd4b2a1544eb76bfa53595
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
In the pattern set by spdk_bdev_io_complete_nvme_status(), allow
blockdev modules to complete a bdev_io with a SCSI status code.
Also move it to the internal bdev header file, since only bdev modules
should be setting bdev_io status codes.
Change-Id: I8b6afad2c02d7c010c5e60f06a7c7e0785eb87ca
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move the scsi_nvme translation code from the SCSI library into bdev, and
provide a generic way to translate any bdev_io status into a SCSI
status.
Change-Id: Ib61a6209387c24543e31574e2b5ca249e2ac8b74
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The contents of struct spdk_scsi_lun don't need to be part of the public
API.
Change-Id: I101b77871054557380610fd901ab38bada463202
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The VirtualBox emulated NVMe device will intermittently
hang on the first read/write command after an I/O
qpair has been allocated. The frequency of the hang
diminishes if a delay is added after allocating the I/O
qpair - until it disappears completely with a 100us delay.
So add a quirk to insert this delay.
Note - the 100us delay was tested by running
the hello_world example app 50000 times.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I237e31b1b8a1a1e28262851ae0a21cd7345f0f1a
Fix up the existing comment blocks misaligned in the first column.
Also add line numbers to the comment checks.
Change-Id: I9d28c365271df36e7013d74cbb02d0023ab4f581
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch assigns correct value to page control.
Now that page control value is correctly taken from CDB,
error via sense data is reported when processing "saved values".
"Changeable values" are not supported, so all parameters
are reported as not changeable when requested.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I41378c96b1e8c716b5d0ce4b72777065fb122228
Fix up all existing spacing errors in comments and add an automated
check for patterns like /*comment*/.
Change-Id: I28f61c93612dc0f8aed66bd509da78e91ea9737e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The new format is: domain.bus.device.function
For this format, since we use '.' as separator,
to avoid misusing, we only support the following:
1 domain.bus.device.function ( 4 values provided)
2 bus.device.function (3 values provoided with domain = 0)
3 bus.device (2 values provided with domain = 0, function = 0)
Change-Id: Ide03db38b4ac7802cf36f0e536e8b997101d6cd3
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Instead, pass NULL when an ADMIN command times out.
We don't expose the admin queue to the user.
Change-Id: If0768d329a689f6f7c3734c9d419e680d7378ed1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Some calls were passing bdev->ctxt, some calls just
bdev. In most of our implementations those are the
same pointer, but they aren't necessarily.
Change-Id: If2d19f9eef059aded10a917ffb270c1dc4a8dc41
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The DPDK mask and the reactor mask are always the same.
Change-Id: I83d3ab87cdfb405574f6472cfc222d3f311abdb1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
According to the analysis, the largest name size is
24 not including '\0' (NVMF_RDMA_WRITE_COMPLETE),
so change the the size of name. Also add a check
to avoid the str exceeding our defined name size.
Change-Id: Iddf2cb52a3f5358306a59fc66bb997fa8098cde0
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
This is the initial commit for "blobfs", a lightweight
filesystem built on top of the SPDK blobstore.
Also included in this patch:
1) a shim for using SPDK bdevs as the backing store for
SPDK blobstore/blobfs
2) documentation for using blobfs as the storage engine
with RocksDB
3) scripts for running a set of workloads and collecting
profiling data with RocksDB and blobfs
See doc/blobfs/getting_started.md included in this commit
for more details on blobfs, including some of the current
limitations.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2a6d3d4b87236730051228ed62c0c04e04c42c73
This is the initial commit for the "blobstore", a lightweight,
highly parallel, persistent, power-fail safe block allocator.
Documentation will be added in future patches.
Change-Id: I20a4daf899f1215d396f7931c3ec9a2e2bb269d0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Move claimed flag to struct spdk_scsi_lun and remove RPC call that allow
SCSI LUN to be deleted by user.
Change-Id: I0fe57d33ab017816ab4799bce259807735e0c783
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
SPDK_COUNTOF works like sizeof, except it returns the number of elements
in an array instead of the number of bytes.
Change-Id: I38ff4dd3485ed9b630cc5660ff84851d0031911f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch adds a library, application and test scripts for extending
SPDK to present virtio-scsi controllers to QEMU-based VMs and
process I/O submitted to devices attached to those controllers.
This functionality is dependent on QEMU patches to enable
vhost-scsi in userspace - those patches are currently working their
way through the QEMU mailing list, but temporary patches to enable
this functionality in QEMU will be made available shortly through the
SPDK github repository.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Krzysztof Jakimiak <krzysztof.jakimiak@intel.com>
Signed-off-by: Michal Kosciowski <michal.kosciowski@intel.com>
Signed-off-by: Karol Latecki <karolx.latecki@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Krzysztof Jakimiak <krzysztof.jakimiak@intel.com>
Change-Id: I138e4021f0ac4b1cd9a6e4041783cdf06e6f0efb
This patch make the function spdk_scsi_task_process_null_lun() as public and
finish the task immediately once we get task in iscsi layer.
Change-Id: I4ada027d3a324dce8ef0d0f7706dbc14184ead96
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
After checking the code, aerl in our session is 0,
so there will be only 1 AER. So currently,
we will only handle 1 AER case.
When the AER event is triggered by real NVMe device owned
by the subsystem, it notifies all sessions belonging to
the subsystem.
Change-Id: Ia80fb0f03e893c20d8dd14afbed8db10db38301c
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
This can be used for issuing an abort for the timed-out command.
Change-Id: I3c5727fdddc156cd7c8f99afbc3e6da8e73bba56
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move cb_arg to the first argument to match the other NVMe callback
function signatures.
Change-Id: I4e699c8071dcb7ba4ce3cdb82ee985600208204c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
By default, all SPDK applications will not share memory.
To share memory, start the applications with the same
shared memory id.
Change-Id: Ib6180369ef0ed12d05983a21d7943e467402b21a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Instance ID is too overloaded and the uses are beginning
to conflict. Separate the RPC configuration out.
Change-Id: I712731130339fee4fc8de4dc2d0fea7040773c58
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Make sure the SPDK_GPT_GUID() macro parameters are treated as unsigned
integers of the right sizes to avoid shifting into the sign bit or
beyond the size of an int.
Change-Id: I1638022692b09b179ffc770f845b053a96a8260f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The host and port output parameters point into the (non-const) char *ip,
so it makes more sense for them to be non-const as well.
This allows the flexibility to pass non-const char pointers as the
output parameters, which will be used in the nvmf_tgt/conf.c parsing
code.
Change-Id: I1d5b102fc389c06d36432904e4fda944437b659e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
These were repeated a few different places, so pull them into a common
header file.
Change-Id: Id807fa2cfec0de2e0363aeb081510fb801781985
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_compiler_barrier() prevents the compiler from moving pointer
dereferences across the barrier.
Use this in the MMIO helper functions to ensure that the compiler can't
reorder operations around e.g. hardware register access.
Specifically, this fixes the compiler optimizing out writes to
g_thread_mmio_ctrlr in the NVMe hotplug handling code.
Change-Id: I6b9cec48da0e6d8d75825c28b12ece5251110080
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This function parses in place by inserting null terminators.
Change-Id: I61cb97b87ec05d0183fbaa993fd3d7580a188bde
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
These strings are not modified by the functions they are passed to, so
they can be const char *.
Change-Id: I11532f232990a305d706c14aac1b0f8f93b8f576
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This virtual block device takes an underlying block device and splits it
into several smaller equal-sized block devices.
Change-Id: I6f6e686c1177b2e4885f7e88809ad329caae55bd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
While here, make it clear this is a benchmark that
tests internal APIs.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie5a57fdcee12b47568542721095c49d28ece5529
The code doesn't actually use this property of cntlid
for anything yet, but we will need it later.
Change-Id: I5fd514d75b903cc8769e7b9f196a4624e9cf876c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
There is only a single device ID for all channels on the SKX
implementation of I/OAT.
Change-Id: I90ee79b1b673a199754f1ca4c9e38e934294e261
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This prevents the need for bdev users and modules to manipulate the
internal bdev_io error.nvme fields.
For now, all non-NVMe error types are treated as a generic device error,
but translation from SCSI to NVMe could be added in the future.
Change-Id: I4e831b26a2f41bf2f405c7576d5019bb898d4d1b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
If a blockdev module calls spdk_bdev_io_complete() within its
submit_request function, and the user's completion callback issues a new
I/O, it is possible to cause infinite recursion, consuming all available
stack space.
To avoid this, track whether a bdev_io is being processed by
submit_request, and if io_complete() is called in this case, defer the
completion via an event.
Change-Id: I6ccdb8ed4ee0d5738e6c9840d35431de52bd5fa2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Claim the block devices used by iSCSI LUNs and NVMe-oF subsystems so
they can't accidentally be reused.
This will also be used by virtual block devices to allow layering of
bdevs.
Change-Id: I5384923fbf24f13f4ce720a797c5a628053d49f4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use a plain function pointer + callback context for the bdev I/O
completion callback. This is possible now because each I/O channel will
be polled on the core that submitted the I/O.
Change-Id: I29ee8e4a3430df11c74845adab840395b9bc5010
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Previously, we did not calculate the ref for the LUN.
Change-Id: If2b7bc7d129e7efd994a7987ae2c421048969acb
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The 'next' event pointer was never used in the entire code base (always
NULL).
Change-Id: I75f999d3a2e10512d86edec1a5a46ef263e2635b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use 'struct spdk_event *' directly for consistency with the rest of the
API.
Change-Id: Ib41a9bf47f5b18f4aebf5f4dee055455cb12ef7d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This allows the elimination of the spdk_event_get_arg1() and
spdk_event_get_arg2() macros, which accessed the event structure
directly; this was preventing the event structure definition from being
moved out of the public API header.
Change-Id: I74eced799ad7df61ff0b1390c63fb533e3fae8eb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The public API user is supposed to retrieve the defaults via the
spdk_app_opts_init() function.
Change-Id: Ie2bd6e809b2d47dbd5d62d396e8715f89f4052d9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The spdk_poller_register() function provides a way to pass an event to
call once the poller is registered, but it is always NULL in the current
code base.
Change-Id: I459bf40ae4d050589577d113b7984f1563aaa9cc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The event->next field can be accessed directly from within the event
library implementation, and public API users should not be using it.
Change-Id: I98a1f0017e03e951d0c4eee3c7989b04324e57d1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
It is only used within bdev.c and can be static.
Change-Id: Id6e2cd9e5dd61a3ef1e1a27993d7a5ea7728bff2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is consistent with the other internal-only API headers.
Change-Id: I2c4748977d38a6c173311d26197d6273c168da7d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The Doxygen build does not define static_assert, so the doc comment
needs to be on the definition under the #else branch.
Change-Id: Ib05ddc729c274810d2963716995ac7c9ce68896b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The definition of SPDK_UNREACHABLE uses the build-time DEBUG definition,
which is not available in the public API.
Change-Id: I1862c99fa5c85ccd3483f94e9c35de531da57f3c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
They were very close to the same already, so finish the job.
Change-Id: Ifba9e3b2d11a3e70cbfbe46f57a67552db2757ed
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The __builtin_expect(), as written before, would have generated the
right branch taken/not taken condition, but the return value was the
opposite of the cond value.
We need to double-not the value to convert it to a 0/1 value while
preserving its original 0/non-zero sense.
Change-Id: I38101ff3ed8e89fc6516cfcdf7d642651545e4ff
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This isn't used yet in the NVMe library, but it will be necessary later
for supporting non-IPv4 addresses.
Change-Id: I167ce63ad25b0e0c9aa192b12d764c8d078e67f9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This better describes what the field controls (it does not affect the
admin queue size).
Change-Id: I851ae46fb4ed0fce819af07ae235824e0fc817e6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The probe_info was reduced to just containing a
transport_id, so remove probe_info entirely.
Change-Id: Ica9a22d126cd14e282decd3eea1a0afe0460f099
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This can be obtained by parsing traddr into a pci_addr,
then getting a handle to the pci_dev and asking for all
of the pci information.
Change-Id: I1948cbd3ec65611293192ef5558ace19dd444d4c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This function will return a device handle from a pci
address.
Change-Id: I323d92c71014ef571f3df9f19c2ec887844707e8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Instead of repeating the fields, just embed a transport_id.
Change-Id: I282704c9d59784abd5f7c93be4e47c673fcf6dde
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This is a small step toward making discovery more like
scanning a local PCI bus.
Change-Id: Ie7149ad060f2eeb56939b1241187bdf09681f2aa
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change the PCI enumeration API to individual functions per device type
so that only the drivers that are actually in use get linked into the
final executable. All of the common code is still shared internally in
the env_dpdk library.
Change-Id: I2ba83afe59202a510f999a0674e23e60b6581221
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The user's remove_cb should detach the NVMe controller when it can
ensure that it is no longer in use. In the interim (between remove_cb
and spdk_nvme_detach()), the controller will remain in a failed state,
so any new I/O submissions will return an error code but not crash.
examples/nvme/hotplug is not yet updated for this change, but that will
be done in a separate patch.
Change-Id: I8827ba36f9688ccb734e7871f20f11ec11e88f96
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The discover and probe 'nqn' fields are subsystem NQNs, so name them
subnqn to be consistent with the spec and the rest of the code and to
distinguish them from host NQNs.
Change-Id: I4a80fbc1f4b037c8a4f91c8f28d2a96e47c66c47
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Allow the host NQN to be overriden when connecting to NVMe over Fabrics
controllers.
Change-Id: I8fcf2e89ae7d9722677e834f76a8fe805c52f91b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
These functions will attach or detach from a PCI device. Attaching
typically means mapping the BAR.
Change-Id: Iaaf59010b8a0366d32ec80bb90c1c277ada7cfe7
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
This allows us to print better error messages when connecting to a
subsystem that exists but does not allow a specific host.
Additionally, we can now return the correct error code for a host that
is not allowed.
Change-Id: I16cd4ac2745cf50bb54601b464b0d23954f86fda
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use the NVMe over Fabrics spec definitions for TRTYPE rather than the
internal library transport type.
Change-Id: Idead559a8f8d95274fc580d10e82033822e6eda8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
These need to be available for the lifetime of the probe_info structure,
so they can't be pointing at e.g. temporary buffers on the stack.
Change-Id: I5aaa898acf9314aab51600dd756f966965d37fd0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
-Wformat-nonliteral needs to be disabled since clang triggers it on the
call to vsnprintf() now that it is nested two calls deep.
Change-Id: I228b9d099cfc2b65181941cbb4798b7f8eae3baa
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is a counterpart to spdk_strcpy_pad() which determines the length
of a string in a fixed-size buffer that may be right-padded with a
specific character.
Change-Id: I2dab8d218ee9d55f7c264daa3956c2752d9fc7f7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make the public API clearer - if the user wants to allocate a
spdk_copy_task directly, they need to allocate spdk_copy_task_size()
bytes.
Also change the return type to size_t for consistency.
Change-Id: I0f3757056757c510421d680c5b4532edd9bc2561
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The SPDK_TRACELOG macro depends on a CONFIG setting (DEBUG), so it
should not be part of the public API.
Create a new include/spdk_internal directory for headers that should
only be used within SPDK, not exported for public use.
Change-Id: I39b90ce57da3270e735ba32210c4b3a3468c460b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Remove usage of the conf structs so they can be moved out of the public
API header.
Change-Id: I1c7375ec7708b323f50af09aeb7b2b2c9c770df4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
These APIs can be used to register/unregister regions
of pinned, huge page memory that are separate from
huge page memory allocated by the default DPDK
allocations. These APIs will be used by an upcoming
SPDK vhost-scsi target to enable SPDK to target
NVMe DMA operations directly to VM memory that has
been allocated by QEMU using pinned huge pages.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I649a4adeeb758b29bd29cd42c8872eed3d5d6ce9
Only function definitions should have a line break between the return
type and function name, not prototypes.
Change-Id: Ic547a6c6541e31bbf95e3d95a28077c9e6510ba6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Now that the env PCI framework already requires enumerating devices
based on an enum of specific device types, it is not useful to query the
class code of a PCI device handle.
It is currently unused and does not work in its current form on FreeBSD
(it reads a file from /sys). This lets us drop a big chunk of file
reading and parsing code.
Change-Id: I1d720398416ba3d6f91e077b807ec11a6de562cf
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The details of the structure were removed earlier, but
now remove all references even to a pointer to the
structure. The user can refer to transports by their
string name.
Change-Id: I273356f46329ea5372dcd951eda6f14767477d69
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This is a step toward abstracting away the definition
of the subsystem.
Change-Id: I88b2aa107b27152620f51a1ca2a153792b4c85e9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This patch is preparation for fixing alloc_len overrun in SENSE 6/10 and
READCAP 6/10. To simplify code forbid usage of iov outside of
scsi/task.c.
This also drop SPDK_SCSI_TASK_ALLOC_BUFFER flag that obfuscate code. As
a replacement assume that if field alloc_len is non zero it mean that
iov.buffer is internally allocated. Functions
spdk_scsi_task_free_data(), spdk_scsi_task_set_data() and
spdk_scsi_task_alloc_data() manage this field.
Change-Id: Ife357a5bc36121f93a4c5d259b9a5a01559e7708
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
The bdev function table should not be part of the public API.
Change-Id: I5d6f40d1b37c4471041c1c9d6253a3f92e9e9701
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Instead of the next_sge callback returning the physical address
directly, make it return the virtual address and convert to physical
address inside the NVMe library.
This is necessary for NVMe over Fabrics host support, since the RDMA
userspace API requires virtual addresses rather than physical addresses.
It is also more consistent with the normal non-SGL NVMe functions that
already take virtual addresses.
Change-Id: I79a7af64ead987535f6bf3057b2b22aef3171c5b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Custom bdev modules can return any SCSI status and SCSI sense
information to a host by this patch. This is usefull when a custome bdev
module detect an error in the module and need to return meaningful
information to a host.
Function pointers will not work for the DPDK multi-process model (they
can have different addresses in different processes), so define a
transport enum and dispatch functions that switch on the transport type
instead.
Change-Id: Ic16866786eba5e523ce533e56e7a5c92672eb2a5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make a wrapper that spdk can call a function without thread affinity, and
call this wrapper to open rbd image.
Change-Id: Iadc87a948f43632abf497f88165483a0e269ba54
This enables using SPDK within a larger process that
is SPDK-centric. In this case the process may start
SPDK and then wish to stop it explicitly (without a
signal).
While here, remove an incorrect comment - DPDK mempools
can be used from non-DPDK threads. Also set the
g_shutdown_event to NULL after it is called. After the
event executes, the event is freed and is no longer valid.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie4f07bee7d05fae683c72f6680cb3bcce2d4a119
Since we are usually going to be removing multiple events from the queue
at once, use the DPDK burst dequeue interface to improve efficiency.
Also rework the event queue runner to always process a fixed maximum
number of events per timeslice for simplicity. This removes the
rte_ring_count() call from the hot path and improves fairness between
events and pollers.
Now that events are dequeued in bulk, we can also put the event objects
back into the mempool in bulk. Add an env wrapper around
rte_mempool_put_bulk() and use it to free all of the events at once.
Basic performance benchmark using test/lib/event/event/event -t 10
is improved: previously ~40 million events per second, now ~46 million
events per second.
Change-Id: I432e8a48774a087eec2be3a64c38c339608af42a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
It always returns NULL in the current DPDK env implementation and was
not used outside of a few ioat examples where it is not particularly
informational.
Change-Id: I14b237c33bc25ddebc6b36bfbd6a4edf6762e3ca
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_nvme_probe() will now provide a struct spdk_nvme_probe_info to the
probe and attach callbacks in place of the PCI device pointer.
This struct contains the useful information that could be retrieved from
the PCI device during probe.
The goal of this change is to allow expansion of the probe information
in the future when other transports (specifically, NVMe over Fabrics)
are added that do not necessarily use PCI addressing or device IDs.
Change-Id: I59a2a9e874e248ce5fa1d7f4b57c8056962ff3cd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add a helper function that converts a PCI address from a string into a
struct spdk_pci_addr and use it in place of the various sscanf()
invocations throughout SPDK.
Change-Id: Id2749723f76db741567e01b4bcb0fffb0e425fcd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The PCI device claim function does not need the whole spdk_pci_device
structure, just the address.
Change-Id: If59df512043ee062cf9f759bdc104fc522625ba8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The NVMe over Fabrics target was storing the PCI device pointer for each
direct-mode controller, but it only really needs the PCI address, which
is exposed via the get_nvmf_subsystems RPC.
Also update the same code path to use the new spdk_pci_device_get_addr()
function for brevity.
Change-Id: I0708b3331b7c279c1a86f0d7459b5deb40dd7c89
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use the new public PCI ID structure in the NVMe library to replace the
previously private struct pci_id.
Change-Id: I267d343917f60bdae949a824bc0fe67457cbbc0d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
- Split the part that gets a PCI device's address into its own function,
spdk_pci_device_get_addr(). This is useful outside of the comparison
function and is orthogonal to comparing addresses.
- Make the comparison function take two addresses instead of a device
and an address. The more general form will be useful with addresses
that are not directly associated with a device. Because of this, also
rename the function from spdk_pci_device_compare_addr() to
spdk_pci_addr_compare().
- Return a signed value similar to strcmp() so that addresses can be
ordered, not just compared for equality.
Change-Id: Idf304454af09ea57f1e1d5dc3a39b077378cecad
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add a field to struct spdk_nvme_ctrlr_opts that allows the user to
specify a keep alive timeout, and add automatic submission of Keep Alive
commands to spdk_nvme_ctrlr_process_admin_completions().
Change-Id: Ib282299a571d8edc59c7933418751bc3a6c98b40
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Specify SPDK_JSON_WRITE_FLAG_FORMATTED when creating a write context to
output more human-readable JSON.
Change-Id: Ie1f0451496aae7e36e4cdb1f05edb4bc4963be17
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch adds support for spdk_bdev_readv in scsi layer.
It also fixes write so that it uses multiple iov's instead of one.
Currently we should use only task->iov (for single vector operation)
or task->iovs (for multiple vector operations).
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ia3b2f6d18fd212b11d7b63b11dc46ec5bbc74788
Make the quirks mechanism generic in preparation for quirks for devices
from other vendors.
Change-Id: Ic003b020a38f1b966021db30e3f2bce9cf6a1a0d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch removes reduntant field in spdk_scsi_task and
fixes all logic to use iov.iov_base
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ie2fa1e2357b6383c118d05aec9206d1c60537d40
This allows the entire transport structure definition
to become private.
Change-Id: I9ca19edbfc3cfb75b9b113a89bb2b90bc499ab16
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This changes as little code as possible while still creating
a single public API header. This enables future clean up
of the public API and clarification of the exposed
concepts.
Change-Id: I780e7a5a9afd27acf0276516bd71b896ad301c50
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
