This unifies buffer management among transports further and is a
preparation to make buffer allocation asynchronous.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8c588eeac4081f50fe32605feb7352f72c628d95
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466847
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
I/O buffer cache is per transport_poll_group now. Hence moving
pending_data_buf_queue from struct spdk_nvmf_fc_conn to struct
spdk_nvmf_fc_poll_group is reasonable and do it in this patch.
This change is based on RDMA and TCP transport.
Further unification among transports will be done in subsequent
patches.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic857046be8da238cb3ff9e89b83cdac5f6349bcf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466844
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The pointer to transport is set to struct nvmf_transport_poll_group
in nvmf_transport_poll_group_create() after returning
nvmf_fc_poll_group_create(). Hence use it and remove ftransport pointer
from struct nvmf_fc_poll_group.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9f2b2ade77afa18d0e97949fc0c2403eb000cdad
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467060
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
RDMA transport have used rtransport and TCP transport have used
ttransport, respectively. So FC transport changes to use ftransport
instead of fc_transport.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7d98eb2f6efbae7e2b4784f31b9de5e1a81bc2ac
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467059
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Both RDMA and TCP transport have uesd group for such case. Hence
FC transport changes to use group instead of tp_poll_group.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic4b401179da506bb204c3ec48650db87f91fe72a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466843
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The pointer to nvmf_poll_group is set in nvmf_transport_poll_group_create()
after returning nvmf_fc_poll_group_create(). Hence holding it into
struct spdk_nvmf_fc_poll_group is duplicated and can be removed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7087c5cdb94b0b0c5f51b0b63b631c08266c90d0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466842
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
RDMA transport have used rgroup and TCP transport have used tgroup
for such case. Hence FC transport changes to use fgroup instead of
fc_poll_group.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I91b7ad6a1c6e45caf92801b0635b18d48b3c9810
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466841
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Start processing ANM events only after the device is fully initialized.
Otherwise some of the structures are partially filled and can be
interpreted incorrectly.
Change-Id: Ia741730cf15d44d76ce8afa7955e6a5bf42ca42b
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466935
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Track the number of acquired but not yet submitted write buffer entries
to be able to correctly calculate the required number of entries to be
padded.
Change-Id: Ie201681937ad1d03ec125aa5912311c54a7e35c9
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466934
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When recovering the data from the non-volatile cache, the data inside
the volatile cache needs to be flushed before flushing active bands.
Otherwise, if the number of blocks in a band is smaller than the number
of blocks inside the volatile cache, part of the data may not get
flushed.
Change-Id: I4e99709c8c2a526a928578870d7fbd5fef37db02
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466883
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Keeping a global discovery log page was meant to be a time saving
mechanism, but in the current implementation, it doesn't work properly,
and can cause undesirable behavior and potential crashes. There are two
main problems with keeping a global log page.
1. Admin qpairs can be assigned to any SPDK thread. This means that when
multiple initiators connect to the host and request the discovery log,
they can both be running through the spdk_nvmf_ctrlr_get_log_page
function at the same time. In the event that the discovery generation
counter is incremented while these accesses are occurring, it can cause
one or both of the threads to update the log at the same time. This
results in both logs trying to free the old log page (double free) and
set their log as the new one (possible memory leak).
2. The second problem is that each host is supposed to get a unique
discovery log based on the subsystems to which they have access.
Currently the code relies on whether the discovery log page offset in
the request is equal to 0 to determine if it should load a new discovery
log page or use the cached one. This is inherently faulty because it
relies on initiator provided value to determine what information to
provide from the log page. An initiator could easily send a discovery
request with an offset greater than 0 on purpose to procure most of a
log page provided to another host.
Overall, I think it's safest to not cache the log page at all anymore
and rely on a thread local fresh log page each time.
Reported-by: Curt Bruns <curt.e.bruns@intel.com>
Change-Id: Ib048e26f139927d888fed7019e0deec346359582
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466839
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In the past, memory in spdk could have been unregistered in
different chunks than it was registered, so to account
for that the vtophys code used to register each hugepage
(2MB chunk of memory) separately to the VFIO driver. This
really made the code generally simple.
Now that memory in spdk can only be unregistered in the same
chunks it was registered in, we no longer have to register
each hugepage to VFIO separately. We could register the
entire memory region with just a single VFIO ioctl instead,
so that's we'll do now.
This serves as an optimization as we obviously send less
ioctls now, but most importantly it prevents SPDK from
reaching a VFIO registrations limit that was introduced
in Linux 5.1. [1]
The default limit is 65535, which results in SPDK being able to
make only the first 128GB of memory DMA-able. This is most
problematic for vhost where we need to register the memory
of all the VMs.
Fixes#915
[1] 492855939bdb59c6f947b0b5b44af9ad82b7e38c
("vfio/type1: Limit DMA mappings per container")
Change-Id: Ida40306b2684e20daa2fd8d12e0df2eef5a4bff1
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/432442
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We'll be now able to check contiguity for more than 2MB
regions.
Change-Id: I738ff451d534075c944972918d08e5e0cadea4f5
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466073
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Most variables related with I/O buffer are in struct spdk_nvmf_request
now. So we can pass nvmf_request instead of nvmf_rdma_request to
nvmf_rdma_request_fill_buffers and do it in this patch.
Additionally, we use the cached pointer to nvmf_request in
spdk_nvmf_rdma_request_fill_iovs which is the caller to
nvmf_rdma_request_fill_buffers in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia7664e9688bd9fa157504b4f5075f79759d0e489
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466212
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Most variables related with I/O buffer are in struct spdk_nvmf_request
now. So we can pass nvmf_request instead of nvmf_tcp_req to
nvmf_tcp_req_fill_buffers and do it in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I00eff578a98891e99fcb9a3aafa3d99126d6f1c1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466089
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Most variables related with I/O buffer are in struct spdk_nvmf_request
now. So we can pass nvmf_request instead of nvmf_fc_request to
nvmf_fc_request_fill_buffers and do it in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibe87e7641e5c364b20a6d877ce7928c612b0b83a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466088
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This is a small performance optimization and an effor to unify I/O
buffer management further among transports.
it is ensured that the request is the first of STAILQ when
nvmf_fc_request_execute() completes successfully.
Hence change TAILQ_REMOVE to STAILQ_REMOVE_HEAD for the case.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If982842bf53ba00426a854a18eaadf8a1b8d642d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466676
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This is an effort to unify I/O buffer management further among
transports. RDMA and TCP transport have named pending_queue
pending_data_buf_queue. So FC transport follows RDMA and TCP transport.
The next patch will change pending_data_buf_queue to use STAILQ
instead of TAILQ.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I57c3c678a1e92ec262eb8940418529a62b6768c3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466675
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This is a small performance optimization and an effort to unify
I/O buffer management further among transports.
It is ensured that the request is the first of STAILQ when
spdk_nvmf_tcp_send_c2h_data() is called or the case
TCP_REQUEST_STATE_NEED_BUFFER is executed in spdk_nvmf_tcp_req_process().
Hence change TAILQ_REMOVE to STAILQ_REMOVE_HEAD for these two cases.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0b195874ac22a8d5ecfb283a9865d2615b7d5912
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466637
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_bdev_part_construct() must be now called on the
same thread that called spdk_bdev_part_base_construct().
This was always the case so far and I don't see any other
case where thread safety could be useful, so just remove
it. The doxygen doesn't say anything about it either.
Even in GPT case, we create a base directly as a part of
examine and then create part bdevs in the spdk_bdev_read()
completion callback, but that callback will be always
executed on the same thread which issued the read.
Change-Id: I752f2a7f08c9faf4231ed53a46b700b33fa13697
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466024
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In this patch, we directly point the hdr_p
to the memory owned by the pdu_recv_buf to avoid
memory copy.
Change-Id: Iee0dd98058928f429bf7ad22103cd4826226400f
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465158
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Most of the assignments followed the DIRS-($(CONFIG_X)) pattern, but
there were a couple of assignments using a different pattern.
Change-Id: I7c80fec2813c32cb7676912d72805565f77b2e3d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466469
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
RDMA transport executes spdk_nvmf_rdma_request_parse_sgl() only if
the request is the first of the pending requests in the case
RDMA_REQUEST_STATE_NEED_BUFFER in the state machine
spdk_nvmf_rdma_requests_process().
This made RDMA transport possible to use STAILQ for pending requests
because STAILQ_REMOVE parses from head and is slow when the target is in
the middle of STAILQ.
On the other hand, TCP transport executes spdk_nvmf_tcp_req_parse_sgl()
even if the request is in the middle of the pending request in the case
TCP_REQUEST_STATE_NEED_BUFFER in the state machine
spdk_nvmf_tcp_req_process() if the request has in-capsule data.
Hence TCP transport have used TAILQ for pending requests.
This patch removes the condition if the request has in-capsule data
from the case TCP_REQUEST_STATE_NEED_BUFFER.
The purpose of this patch is to unify I/O buffer management further.
Performance degradation was not observed even after this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idc97fe20f7013ca66fd58587773edb81ef7cbbfc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466636
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Use spdk_nvmf_request_get_buffers() and spdk_nvmf_request_free_buffers(),
and then remove nvmf_fc_request_free_buffers() and nvmf_fc_request_get_buffers().
Set fc_req->data_from_pool to false after spdk_nvmf_request_free_buffers().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I046a642156411da3935bc2fa2c2816fc2e025147
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465877
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Use spdk_nvmf_request_get_buffers() and spdk_nvmf_request_free_buffers(),
and then remove spdk_nvmf_tcp_request_free_buffers() and
spdk_nvmf_tcp_request_get_buffers().
Set tcp_req->data_from_pool to false after spdk_nvmf_request_free_buffers().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I286b48149530c93784a4865b7215b5a33a4dd3c3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465876
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Use spdk_nvmf_request_get_buffers() and spdk_nvmf_request_free_buffers(),
and then remove spdk_nvmf_rdma_request_free_buffers() and
nvmf_rdma_request_get_buffers().
Set rdma_req->data_from_pool to false after
spdk_nvmf_request_free_buffers().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie1fc4c261c3197c8299761655bf3138eebcea3bc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465875
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch adds new APIs spdk_nvmf_request_get_buffers() and
spdk_nvmf_request_free_buffers() to be used among transports.
Subsequent patches will replace transport specific APIs by them.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib153e2c5806b7276915a0aa91179fe9dbcb2a1f0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465874
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is a prepration to unify buffer management among transports.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6b1c208207ae3679619239db4e6e9a77b33291d0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466002
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is a preparation to unify buffer management among transports.
struct spdk_nvmf_request already has SPDK_NVMF_MAX_SGL_ENTRIES (16) * 2
iovecs. Hence incresing the number of buffers twice will be no problem.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idb525abbf35dc9f4b8547b785b5dfa77d106d8c9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465873
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Moved scrubbing of nv cache to core thread. Added IO channel which is
used in user context, during shutdown of nv cache.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I88e680324e361bf7e0c0a9a9d29323f179c56e3b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465932
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
One of stop conditions in data WR release function was wrong. This
can cause release of uncompleted data WRs. Release of WRs that are
not yet completed leads to different side-effects, up to data
corruption.
The issue was introduced with send WR batching feature in commit
9d63933b7f.
This patch fixes stop condition and contains some refactoring to
simplify WR release function.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ie79f64da345e38038f16a0210bef240f63af325b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466029
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Purpose: Reduce the recv/readv system call.
Method: Use a big recv buffer to conduct the read.
Though it will introduce addtional buffer copy,
we hope that the overhead introduced by buffer copy will
be smaller compared with frequent recv/readv system call overhead.
And the design is to make a trade off between them.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I9286fd9cec0b512cea8e3f2c335c5bf862b98573
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464842
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Purpose: Prepare the further optimnization in the
target side whening receving pdu headers, we expect
to use zero copy.
Change-Id: Iae7f9106844736d7160d39d0af1f5941084422ec
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465380
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Originally loading json_config using spdk_app_json_config_load_subsystem()
implied issuing start_subsystem_init RPC. This required a workaround
in the callback of RPC spdk_rpc_start_subsystem_init_cpl(), in order
to skip starting the app in json_config load path.
This made it difficult to load json_config without implicitly using
rest of the event framework. It will be usefull for example in
fio_plugin, which does not use the app.c API.
With change in this patch json_config load path directly calls
spdk_subsystem_init() C call.
Meanwhile start_subsystem_init RPC no longer needs a workaround
for json_config load path.
Change-Id: I535e079339cedaf0950767a8204002ab5885d8a5
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463978
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This change adds return code to spdk_subsystem_init().
Making it's caller responsible for handling application
state - such as calling spdk_app_stop().
This change implies that start_subsystem_init RPC does not
stop the application on failure, only reports back the error.
Renamed g_app_start/stop variables to now more relevant
g_subsystem_start/stop.
Change-Id: I66a7da6ecfb234a569c65279cc4b210ddac53d2a
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464412
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When getting the list of available RPCs from a tool like rpc.py,
aliases often should be hidden.
However, when getting the list of RPCs available
for loading from a JSON config file, aliases should be included.
Change-Id: Ie22d8b0ec2515d37dbfadf01b5cb709c160beb3e
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465656
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Track the band under defrag inside the reloc module. This allows for
multiple bands being defragged at the same time (e.g. extra one due to
write fault) as well as makes it easier to handle cases when relocating
a band that has no valid blocks.
Change-Id: Ia54916571040f5f4dfdb8f7cdb47f28435a466d8
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465937
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The OCF build was broken by some of the recent changes
to the Makefiles. This change aims to fix that by separating out the ocf
environment from the ocf bdev.
Change-Id: Id445340033898e9ae70a4bcfc799951110762d55
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465808
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds new interface for opening bdev and
implements new style remove event. With that changes
user can be notified about different types of events
that occur in regards to bdev. spdk_bdev_open_ext
function uses bdev name as an argument instead of bdev
structure to remove race condition where user gets
the bdev structure and bdev is removed after getting
that structure and before open function is called.
spdk_bdev_open is now deprecated.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I44ebeb988bc6a2f441fc6a0c38a30668aad999ad
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455647
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This follows the practice of RDMA transport and is a preparation to
unify buffer allocation among transports.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib85625f2a0eca01ef4028685dd838d6c41faad7b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465872
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This follows the practice of RDMA transport and a preparation to
unify buffer management among transports.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4e9b81b2bec813935064a6d49109b6a0365cb950
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465871
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is a preparation to the next patch to use spdk_mempool_get_bulk.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I28a5ad941004f139c9032d85c2ef92680081f1ce
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465870
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This follows the practice of RDMA transport and is a preparation to
unify buffer allocation among transports.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3cd4377ae31e47bbde697837be2d9bc1b1b582f1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465869
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
FC transport can use buffer cache as same as RDMA and TCP transport
now. The next patch will factor out getting buffers and filling
buffers to iovs in nvmf_fc_request_alloc_buffers().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0d7b4552f6ba053ba8fb5b3ca8fe7657b86f9984
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465868
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a preparation to the next patch to use buffer cache in
FC transport.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I116b064ea0b0a437f9a3293a6f3d46a0e5fc8ecf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465867
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This follows the practice of RDMA transport and a preparation to
unify buffer management among transport types.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic7dc8e6b826baf7f471d192630e8a048a35056ac
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465866
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
NVMe-oF FC transport have used its own buffer pool and have not used
common buffer pool yet.
It looks that there is no particular reason to prevent FC transport
from using the common buffer pool.
This patch removes FC transport specific buffer pool and changes
FC transport to use common buffer pool instead. Add transport
as a parameter to nvmf_fc_request_free_buffers() because similar
APIs of RDMA and TCP transport do that.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iae3a117466c21eaddbe78a8e8023d80ef37bb3e9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465865
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
NVMe-oF FC transport have used its own buffer pool and have not used
common buffer pool yet.
It looks that there is no particular reason to prevent FC transport
from using the common buffer pool.
This patch extract checking fc_req->data_from_pool from
nvmf_fc_request_free_buffers() to make the transition easier.
fc_req->req.iovcnt and fc_req->req.data should be cleared regardless
of fc_req->data_from_pool. Hence extract them into callees.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I36420f0e573d1ec3f9f3a75f6b2ced82ade89dd3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465864
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
NVMe-oF FC transport have used its own buffer pool and have not used
common buffer pool yet.
It looks that there is no particular reason to prevent FC transport
from using the common buffer pool.
This patch adjust the setting of the FC transport specific buffer pool
to the common buffer pool to make the transition easier.
Large alignment requirement consumes more memory but is acceptable.
Cache size calculation looks dated.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id3224b65f39187c4d8e99c00cf54b1cfdd902250
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465863
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently we *always* wait 2 seconds before starting
controller initialization during attach. This
works around an issue where some older Intel NVMe SSDs
could not handle MMIO writes too soon after a PCIe
FLR (which would be triggered when VFIO was enabled).
After further discussion with Intel experts, we know
the SSD models that exhibit this issue. So we can
quirk this so that only the older SSDs incur the extra
delay.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ieb408c24f6afd5bd5147d1c87239aa20f2d13511
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466064
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
When rte_vhost tells us to start a session with given
vid, we lookup the corresponsing session object from
an spdk-internal session list and tell it to start
polling without even specifying any backend. The vsession->vdev->type
checks could only fail as a result of some spdk data
corruption, so replace those with just asserts now. This
code path could have never been hit in our tests anyway.
Change-Id: I97c6cbe7088f338b684d291c93cbc59c44cfdc4e
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466042
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Error messages are extremely chaotic, so unify them to
a single format:
<session name>: <error string>
Change-Id: I9b4c29321700b485e0e7eb71a73ea094cf02f000
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466041
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Error messages are extremely chaotic, so unify them to
a single format:
<session name>: <error string>
Some messages were slightly reworded to make them more clear.
I believe it would make sense to replace some of those ERRLOGs
with TRACELOGs, but that's not going to change now.
Change-Id: I32fa38b3bf26998b418b8b9e68c88ec5022c973f
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466040
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We currently don't have any way to differentiate different
sessions e.g. in error messages. Whenever there's an error
in some session, we just print the device name.
We now introduce vsession->name with the following format:
<device name>s<dpdk connection id>
Note that it's still impossible to know exactly which
qemu process corresponds to which session in spdk, but
there's not much we could do in that matter right now.
In spdk we don't even have the accepted connection fd.
Change-Id: I666aa60c5e36bf3d56f68133042af2afc8cc5e85
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466039
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This id is assigned from a global increment-only counter
whose type is uint64_t. I believe the original intent
was to use uint64_t for vsession->id as well, let's fix
it now to avoid wrapping errors.
Change-Id: I9cae87e6c74400590a1dc1b1f91d51e4a4c13499
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Acked-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466038
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We've recently switched from manually calling eventfd_write()
to rte_vhost_vring_call(), which besides writing to the
eventfd, always calls a full memory barrier in the upstream
rte_vhost lib. With upstream rte_vhost we're actually
calling two memory barriers on I/O completion - one in
spdk code, one inside rte_vhost_vring_call().
The spdk barrier was only required for our internal rte_vhost
lib, whose rte_vhost_vring_call() implementation (that we
wrote) did not have such membarrier inside. So now we'll
add this membarrier there, and remove the same barrier
from spdk code.
This doesn't change any code flow for the internal rte_vhost
lib, but optimizes I/O path for the upstream version.
Change-Id: I68738d7feb9159f718b0e60ac7eed1fafd4836b9
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466037
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
One recent commit destroyed the critical bug fix for LUN hot plug.
Hence this patch restores the critical bug fix. Simple revert is
not possible because connections are assigned to poll groups
instead of cores now. But we can revert easily because earlier
version of the recent patch did that.
Fixes#925
The github issue was caused by commit 8cf1945432.
The bug fix restored by this patch is commit 1f6a78620d.
The reference we can follow to create this patch is earlier version
of commit fb641c4b54.
Reported-by: yidong0635 <dongx.yi@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ie1ba14a59ce48149a8474cbffc56aa08adc1fc4d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466108
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Begin organizing file so setup operations appear
at the top.
Change-Id: I7411b4bf20480c8aeb40bc21b521e5d359f8da1f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465991
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
By adding this file and modifying the way we define a couple of
variables in the makefiles, we can actually avoid having to redefine
the library dependencies on a per file basis.
Change-Id: Ieab4aa1021b0341fc21e3b65677a9ad7f70559c2
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466063
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Every exit path in spdk_bdev_set_qos_rate_limits() should
go through _spdk_bdev_set_qos_limit_done() as soon as
ctx is allocated and qos_mod_in_progress set to true.
This patch fixes one path were it did not occur.
With this change qos_mod_in_progress is set to false,
when failure in allocating qos parameters occurs.
Change-Id: I04a45dfdcde9160fd2701b44f5fde26fb0245177
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465659
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There is a case in vhost where this occurs. Until that is
sorted out, just make this a warning.
Change-Id: Id021791e8cbddf3023e0cb1b8c52a733b3578a7d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466075
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Rounding out the module concept of SPDK libraries.
Change-Id: I2b316153809ae9f73361648fe505274a59d0bdb3
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465456
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These directories fit in with the module concept we are forming inside
of SPDK. Essentially modules are derivative or specialized libraries that
rely on a general or core library.
Change-Id: Ib40f05422f144ff8fd579f47a3867ef4412b3372
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465455
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is more accurate to what they are, and will make defining library
dependencies much simpler. This change in directory does not affect the
final placement of naming of libraries at the end of time.
Change-Id: Ic48a9233dff564e39ce357a9ea0a111ea2b6414b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465454
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This was unused. The rusage polling is done in another way.
Change-Id: I478ddb2d664647e922f3049a64199fdc61f25ce1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465989
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Expose spdk_app_json_config_load() in internal to SPDK header.
In future patches it will be possible to use this function
without depending on rest of event framework (such as app.c).
Applications that do not use SPDK reactors (have their own threading
model) or no need to initialize using spdk_app_start(), will be
able to utilize subsystems and their json configuration loading.
Change-Id: I093181977d121e39ddbf212f8dff3182a4102fd6
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464178
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Only affects QAT where only partial data transfers would occur
when a host buffer crossed a 2MB boundary.
fixes issue #897
Change-Id: Ib20bfb3557c11a6da996f4b209e9bb7c634f8f49
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464719
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
The previous patch in this series introduced the notion of an
orphan comp bdev which is available only for deletion due to
a missing PMEM file. This RPC allows applications to list
orphaned comp bdevs as they will not show up with get_bdevs
because they are not registered bdevs.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I431f9cdebd4e5ae6068308639cb41d6c52f7309b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465812
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When a vol load fails because of a missing pmem file, instead of
doing nothing we now claim the underlying bdev and make an entry
in our global list for a comp bdev so that the regular delete
RPC can be used to delete the comp bdev.
fixes issue #890
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Icd5357060648e722f94e8f6b9038c8dad032feb3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465807
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
So it can be called from an earlier one in the next patch.
Change-Id: I1e79669d33d84e54c27305e38076cbdafea627e3
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465986
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Will be re-used in an upcoming patch.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I676beb7f61c100043189c56484a41c209cd2942d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465829
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
First is a patch series that enables an application to delete
a compression vbdev when the volume is missing it's pmem file.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ida639d2c231833f23131926d442ad430ec903e03
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465805
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added assertion to check is there is no any
acquired write buffer entries during shutdown.
Change-Id: I92be8ff07b2bf338acb65a0e37d0cc6ad6962d81
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462934
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Padding size calculation should take into account
already acquired write buffer entries in case
number of blocks left for closing band is less than
write buffer size.
Change-Id: I0f9c9bc94eb5a4736eede30ec424c81103e1256f
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463525
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a part of a change that will introduce
new spdk_bdev_open_ext function. This will make
possible to pass callback function while opening
bdev which will be called when some bdev events
occur.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I3e552edd5c90dacd39885e75e9114e48dddf50ea
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463157
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
All of the RPCs in lib/nvmf/nvmf_rpc.c rely on knowing which nvmf_tgt
they should work with. They have historically relied on the assumption
that there will only be a single target in a given application. This is
true for the example application in the spdk repo, but it is not
necessarily true generally,
By adding an option tgt_name parameter to the RPCs we enable them for
multi-target NVMe-oF applications. We also further reduce the coupling
between the library and the example application.
Change-Id: I03b6695da05a42af3024842ed87d2ce2c296f33f
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465442
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
There are one or two RPCs that deal with application specific
configuration. We can leave these there for now.
Change-Id: I9c40aa3403d32d3e2214c8c904fb1c414ad99967
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465365
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The global nvmf target is really an example application specific
feature. This should be separated from the generic RPC functions as much
as possible.
Change-Id: I7671aa88c20a39129aa13d1a7100b537bf34b00d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465364
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function will allow applications (and RPCs)
to obtain an spdk_nvmf_tgt pointer by name.
Change-Id: I82792e06a819e06d9fddb5429830008653d92cd1
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465349
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The arithmetic was backwards when computing the latency values to
report back to rpc calls like get_bdev. This caused reasonably sized
latency values to report back 0.
Change-Id: I85e22c9c8aa202a2ac1db7e7081f397800b151b8
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465168
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will provide a unique identifier which can be used to provide get
and set methods within the RPCs.
Change-Id: Idd144e99e49b8d26530f60530d2e908b18fa251b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465330
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is necessary to allow the spdk_nvmf_tgt structure to evolve over
time without having to further change the target API.
Change-Id: Ib0f0f9b1f190913feff0229c96df4e84b1bf35f7
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465363
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
As part of moving the nvmf rpc code to the library, we will need to make
it more inclusive of use cases outside of the example spdk nvmf_tgt
application. That application only supports a single nvmf target
structure. As such, many of the RPCs have this assumption built into
them.
In order to enable the multi-target use case, we need to configure a way
to translate between user supplied RPCs and actual target objects in the
library.
Change-Id: I5d3745afe9c2ca1c33f6e1a1bcc2b8bb3196ccd6
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465329
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Part of a larger series simplifying the library directory.
Change-Id: Ib9c9dc9a0c92ac35a9f0260451f97fc126d10031
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465212
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Part of a larger series unifying and simplifying the library directory
structure.
Change-Id: I2782165aabbea9a31cc466fc7e3bb2b9263142dc
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465211
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Combinining these two libraries removes some directory complexity. It
also helps us to align on a common practice for including the rpc code
with a given module. This is how all of our bdev modules already do it.
The nbd, net, and scsi modules also follow this pattern.
Change-Id: I5e4c99d7f0facacc6dfe30b2274b60e0d151f8d8
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465210
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is part of a larger series aimed at simplifying/flattening the
directory structure of the SPDK lib directory. The ultimate goal of this
series is to properly create dynamic linker dependencies between all
spdk shared objects.
Change-Id: I6beb7103404ae2c24a3d25dd93a1061680c7176c
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465209
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Because required alignment is already set to block size and by design
the crypto module does one crypto operation per block (it uses the
LBA as the initialization vector) it should not be possible to get
a physical address that spans however adding an assert just in case.
Change-Id: I1dc844d0a32395f9ed4869429368f60b919703a4
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465107
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The log_rpc library has several dependencies which depend upon the log
library. This creates a circular dependency chain that makes single
threaded make unwieldy and makes multi-threaded make impossible.
Change-Id: I35e6532afcabce0f25974ed97444a56975654904
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465192
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is patch that implements changes according to proposal
submitted in https://review.gerrithub.io/c/spdk/spdk/+/453036
Change-Id: I5423cd34cb5fc111b34cab2b7f7c6c5f11898af8
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464677
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Now if rpc fails ambiguous logs are printed.
Use more descriptive errors.
Change-Id: I7bd3a9e9d94d42fd1effb74f48c5de331b419440
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462627
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
__fs_create_file_done() is just used to wake up the caller
in synchronous API.
Change-Id: I08611eab74ab353021d5e9d7a33fe825f4c5a8c2
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464362
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
WRITE_TO_RO_PAGE was incorrect and misleading. This
0x82 NVMe status code indicates a write to a read-only
range of LBAs. So modify the constant name and
associated usages to use WRITE_TO_RO_RANGE instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I993dbebb5acc2e685a0e99aa14084942ef79d659
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465083
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_nvme_detach() will do the normal shutdown notification for
most cases, and it will take some time e.g. 2 seconds to finish
the process for PCIe based controllers. If users' environment
has several drives, each drive will call spdk_nvme_detach() one
by one, and the shutdown process may take very long time.
Since users know exactly what they would like to do for the next
step, so here we provide an option to users, users can enable it
to skip the shutdown notification process so that they can have
very quick shutdown process, and when starting next time, the
controller can be enabled again.
Change-Id: Ie7f87115d57776729fab4cdac489cae6dc13511b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463949
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also release the IO channels with filesystem data structure.
Change-Id: I75a5d427fe4837ad7d85444d09ded9ab41e0ca8e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464851
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We used "BLOBFS" as the signature when loading from blobstore, so define
a macro here.
Change-Id: Iff504a36686c2bc08c90c49b8a505b5533b62508
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464850
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will allow us to do interesting things in tests like configure a
bdev with a really long delay, and allow I/O to build up on a target to
see what happens, then decrease the latency to allow traffic to flow
through normally without ever having to delete and reconfigure the bdev.
Change-Id: Ibcb1101f8eed9fe3094ba239110cb4e49ace6554
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464454
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
portal_host and portal_name were added to struct spdk_iscsi_conn long
ago but had not been used yet. Portal group and its portals can be
removed dynamically even if there is any binded connection. Using
cached pg_tag will avoid potential errors.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I56d02664a3e8b2398bbb9162b1c85856e991b5b4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463879
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
pg_tag was added to struct spdk_iscsi_conn long ago but had not
been used yet. Portal group and its portals can be removed
dynamically even if there is any binded connection. Using cached
pg_tag will avoid potential errors.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic7a96ef97c3cab7e5a58aa7f439364b53694a1e4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463874
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will reduce the potential malloc failure.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibcd631bf318ef6ece4ac337219652323ca5fd8f1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464136
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Becomes important in next patch
Change-Id: Ida19f0b59c4b841d6f5120f9130e24b57ae91560
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464717
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Changed initialization of io channels to be made in the core/read
thread themselves. This fixes potential hangs when using the ftl lib
directly, without bdev and initializing an ftl device from a different
thread than will be used for IO.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I7089cc46cc6de5e9008e7c22cc01d2b4103ebb14
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464891
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a preparation to the next patch which will change portal_host
and portal_port from malloc to fixed size.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0f95d969edfd88efde41a43eaf0426fcd4b98987
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464135
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
conn->target is initialized to NULL in iscsi_op_login_phase_none
and then configured in iscsi_op_login_session_normal. Hence
subsequent references to target node can be done by conn->target and
related local variables can be removed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I68b94cb8e136522ef1e0ed74c0035ec2b666bb9e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463700
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously, aplications were always being linked against the
spdk_env_dpdk.a file even during the shared object build. Change this to
be consistent with our linking.
Also, the old behavior causes issues with resolving symbols in FreeBSD.
Change-Id: I96e2e6044c16e7579cff35ad46e3688ce6fa2b5a
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464733
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When building shared libs, we specifically don't set the --as-needed
flag so that we still link against libraries that have constructor
functions. LD reports on its man page that the default behavior is
equivalent to --no-as-needed.
For RHEL based distros like fedora and centos this works fine. While
the LD man page shipped with ubuntu distributions also states that
--no-as-needed is the default, they don't respect that behavior and do
--as-needed linking unless you force them with --no-as-needed.
Change-Id: I914ab849323de198af5c5e53fffb1f57fcaff5fe
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464621
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
iSCSI poll groups are bind to SPDK thread through IO channel now.
This patch changes get_iscsi_connections RPC from synchronous to
asynchronous by using spdk_for_each_channel.
Core ID was removed from the output of the RPC but thread name
is added to the output of the RPC in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I20fdb7f11434acf838a89435ba5052b19869181c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463569
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Factor out writing connection information to JSON context into
a helper function spdk_iscsi_conn_info_json.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3e92bcb4f21cc7a36af182f850c944b8c5dd559f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463568
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This patch binds poll groups to SPDK thread through IO channel and
assigns connections to poll groups instead of cores.
iSCSI subsystem registers iSCSI global object as an IO device, and create
poll groups as context of IO channels of the IO device.
Each portal get and hold portal group on which the corresponding acceptor is
running.
When a connection is constructed, iSCSI subsystem assigns a poll group
to the connection by getting it from the corresponding portal.
When a connection enters full-feature phase, iSCSI subsystem schedules
the connection to a poll group by round-robin.
Then, each connection can know its running SPDK thread directly and can
use SPDK message passing infrastructure instead of SPDK event framework.
By this change, iSCSI connections are binded to SPDK thread, and not
binded to processor core anymore.
Some other changes in this patch are
- core ID is removed from the output of get_iscsi_connections RPC. The
upcoming patches will change the RPC to use spdk_for_each_channel and can
access SPDK thread safely, and add SPDK thread ID instead.
- utilize UT multithread framework added by the last patch to test
iSCSI poll groups by UT.
Change-Id: Iec73c778aa413bcabdb63141cc41d4160911ea0e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463359
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Data type of number of base bdevs are corrupted. uint8_t is enough
and unify almost all related variables into uint8_t.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I323aaa229a76c3d5b5361d7643c3a9591ccad340
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464357
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Checking if required parameters strip_size, num_base_bdevs, and
raid_level had been done in raid_bdev_config_add(). However, this
required us to use integer type.
If we do the check in raid_bdev_parse_raid(), we will be able to
use the same type between function parameters and variables of
struct, and hence do in this patch.
This will align with the next patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I10fd75f25ed9a5d40eb189b05c2a20c276fa3ad6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464365
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The following issue was observed.
The first thread returned the last IO channel and the second thread
then removed the first base device, but raid_bdev_cleanup() was
called before raid_bdev_destroy_cb() was called.
raid_bdev_destroy_cb() was accessed to the raid bdev already freed
by raid_bdev_cleanup() and caused segmentation fault.
The call sequence was as follows:
The first thread:
spdk_put_io_channel() -> ch->destroy_cb -> raid_bdev_destroy_cb
-> access raid bdev
The second thread:
raid_bdev_remove_base_devices() -> raid_bdev_deconfigure() ->
spdk_bdev_unregister() -> spdk_io_device_unregister() ->
spdk_bdev_destroy_cb() -> raid_bdev_destruct() -> raid_bdev_cleanup()
-> free raid bdev
The fix is to hold number of created channels in struct
raid_bdev_io_channel and use it in raid_bdev_destroy_cb().
Bdev layer, IO device/channel layer, and NVMe-oF layer already
process this case correctly.
Fixes#884.
Reported-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Ie9d61bdddca479ce7f491ff9a08db45e71f16a8d
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463249
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
After recent changes, that function can not return
NULL anymore, so remove all redundant checks from
various SPDK libraries.
Change-Id: If80344b6fa81ad5f87a7086804dba221522cd7e2
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464175
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_jsonrpc_send_error_response() is documented as a
shorthand for spdk_jsonrpc_begin_result() + end result,
but we used to call it already after doing
spdk_jsonrpc_begin_result(), which makes the response
completely invalid.
Fix it by deferring the initial spdk_jsonrpc_begin_result()
until after we did our error checking. While here, remove
the NULL checks from that function. After recent jsonrpc
changes it can never return NULL.
Change-Id: Ibb69803d4e6ce6516817673eec6626dcfc4f1abf
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464174
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Purpose: To reduce the duplicated code.
And one minor fix: add an empty line between two functions
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I12c9ddba6526c094cd2bd945e14f9d8bf5209adf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464504
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
'ResetControllerOnTimeout' was renamed to 'ActionOnTimeout' for a
long time, so we deprecate the support for this old configuration
option.
Change-Id: Ia44035a8749ca046c1df16f82601389b5bafeb76
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464491
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK_NVME_DEFAULT_RETRY_COUNT is the default value for each controller, so
we can move it out from public header file, and change the value if users
provide a new one.
"NvmeRetryCount" was deprecated for a long time, so we removed the support
for this configuration option as well.
Change-Id: I187251cc1e5342abb4fce96727d06631b7c16a01
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464489
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We have defined NVMe controller initialization 'transport_retry_count' option, so
global 'spdk_nvme_retry_count' can be removed, we will remove the variable with
PCIe transport first, and make the retry count can be configured via RPC.
Change-Id: I4d54f78c8da2180d536635587e7291f44a57c4fb
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464472
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
From rdma_cma.h "Users must destroy any QP associated with an
rdma_cm_id before destroying the ID."
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I5ed0c25221c5401cdde8b31a4e217b9d79e7caaa
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464290
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Skip token header length which varies for short,
medium and long atom.
Fix Issue #898
Change-Id: I2351193e5a43608495f3d816ff4e5932399a6312
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464502
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch is in the patch series to migrate iSCSI connection management
from core based to SPDK thread based.
The callback to hot removal of LUN, iscsi_conn_remove_lun, is called
on the same core when the corresponding LUN is opened. Additionally,
all operations in iscsi_conn_remove_lun are completed synchronously.
Hence inline _iscsi_conn_remove_lun into iscsi_conn_remove_lun.
Add assert to check the function is called on the specified core.
This change is helpful to achieve the goal of the patch series
because spdk_event can have two parameters but spdk_msg can have
only a single variable, and hence we cannot convert simply and have
to introduce a context allocated dynamically otherwise.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iaebf18265dfe839f7361b09539527a1806aed1c4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463551
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Connections will soon be assigned to poll groups, which will be
dynamically moved between CPU cores based on load. It no longer makes
sense to restrict certain portal groups to specific cpu cores in this
model.
Change-Id: Iee983d75febc9797aa60021c5bc0680335e895cd
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463358
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Commit 6708b7 ("lib/ftl: fix the unclear PAGE_SIZE") removed
PAGE_SIZE from lib/ftl, but one PAGE_SIZE remains. I follow
the commit to change the PAGE_SIZE to FTL_BLOCK_SIZE and 4096
for alignment.
This broke my ppc64le build, which PAGE_SIZE is not defined and
should be taken with sysconf.
Signed-off-by: Takeshi Yoshimura <tyos@jp.ibm.com>
Change-Id: I9cabb5ffc4d41e094eae62439ab701579c87d014
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464251
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This library was being consistently built, even when the CONFIG_VHOST
directory was set to false. On the shared object build, this leads to a
few undefined references from the event_vhost.so library when trying to
link against an SPDK application.
This library should be built based on the same conditions as the vhost
library. This assumption is already baked into other aspects of the
build system. See for example the makefile under app/spdk_tgt.
Change-Id: I1c6e651b29785b48455a3a0ce7faaed4319148d9
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463941
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Purpose:
1 Do not caculated the psh_len every time.
2 Small fix, for ch_valid_bypes, and psh_valid_bytes,
we do not need to use uin32_t.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I9b643da4b0ebabdfe50f30e9e0a738fe95beb159
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464253
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For MODE_SELECT request we didn't verify the parameter
list length field from CDB and could complete an invalid
I/O without reporting any error. Fix it by adding an
additional check. Just to clarify: the I/O did not do
any harm, we just completed it with success while we
should have completed it with some error status.
Change-Id: I473e321da37259ee6318ca7dadab2726851d2b68
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463065
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The lines in this file are extremely long. astyle doesn't
really allow us to always go under 100, but we can at least
try to do our best.
Change-Id: I36f454b67460cadf92f99578512349d048d4861b
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462377
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If an ANM event has come to a chunk/sector that has been marked as
high_prio (eg. after a write failure), there's no need to add any
sectors for relocation, as the whole band should be marked for a move
anyway.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I57824ba7e592540ea639f9f011149210fd688a5a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463289
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Ran into this while putting the compress tests in CI, an error
message will print following the completion of the app, checked
with Jim and it is actually not an error when lvols are involved
so change to warn now as this will show up in everyone's build
log for bdev testing.
Change-Id: Ib509b89acf5b6bfbeb349692ab59bbea4964557f
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463803
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We should be checking directly against the base of the iov when doing
memory map translations. The current behavior is to check against the
starting address of the buffer which is a close address, but not exactly
the same.
Change-Id: I7f65224a6836a814708438f2866d84ae22882216
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463893
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: <jiandong.zheng@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In case of failure during resource allocation within poll_group_create
there is a lack of return statement which could lead to NULL ptr
dereference.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I84abe64a1843117d76b97e62656bdfc4fe2b35d8
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463195
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_sock_group_poll() and spdk_sock_group_poll_count() had returned
0 on success. The implementation didn't match the specification
described in the header file, and couldn't be used to collect stats
correctly because 0 means idle.
This patch fixes the return value of spdk_sock_group_poll() and
spdk_sock_group_poll_count() to return number of events and
the callers not to overwrite the return value by 0.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7e2a17187fc74ea44d3acf2f35d63f5e5a254eda
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463710
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Checked code, we do not free the memory allocated
spdk_sock_placement_id_entry.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ie614dc17334b21b8904b16ee7e6e68a24e29d6a3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463725
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Will execute short run per patch, longer nightly. This
path only covers the ISAL PMD as there are QAT upgrades
needed in CI. It does so by using the new 'perform_tests'
RPC in both bdevio and bdevperf.
Change-Id: I93afda336d7411b695b2ddd0332cce0050d075a4
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455113
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Chunyang Hui <chunyang.hui@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We need to compare the group info, then delete the
related entry.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ie5ed7f3ce8611fd61448788f54a63f624c813c19
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463176
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
A single I/O may allocate more than one request, since splitting may be
necessary to conform to the device's maximum transfer size, PRP list
compatibility requirements, or driver-assisted striping. Very big
I/O request sent from application may get error due to limited resources
in NVMe driver layer, so here we add an optional parameter to make the
parameter can be configured by users.
Fix issue #745.
Change-Id: I7824232c54865b052dcd0ec6e91484c3837fc2c4
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461182
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
For aarch64 spdk_mb is defined as "__asm volatile("dsb sy" ::: "memory")"
and spdk_smp_mb is defined as "__asm volatile("dmb ish" ::: "memory")".
"dsb sy" completes when all instructions before this instruction complete.
And "dmb ish" only keeps the order of memory access instructions before
and after it. It doesn't affect the ordering of any other instructions.
Here I think "dmb ish" is enough.
And replace spdk_mb with spdk_smp_mb here will not affect PPC64, X86_64
and i386.
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Change-Id: Idd65f74567c594e5a6514a4ab0665b8f3606c883
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463455
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Was 1024 but w/the performance optimizations we can now use up
to 4 mbufs per outstanding IO so going to 8192 only uses 1MB of
mem and gives us better head room before we have to start queueing
compression operations to wait for mbufs. Note: the mbuf pool is
shared accross all virtual compression bdevs.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I64d3973e7c7d31925b1ce5028ef960f90331c067
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463538
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
NVMf statistics functions use spdk_get_io_channel function to get a
poll group. It increases reference counter in io channel and causes
problems on application exit. spdk_put_io_channel calls were added to
release the channel.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I832d1eae346c3bc3858ed0ed063ff7a7a897a2f5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463389
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There's a small drive-by in here also, use the max iovec define
from the reduce header instead of manually making sure its the same
here.
The change in the size of the MBUF pool is to accommodate the new
QAT driver being faster (?) than the old such that we could run out
of MBUFS with a fio test using 6 threads. On the + side, when we did
the queueing code in the compression operation worked good.
Also related to QAT and experimenting with fio compression ratios, QAT
can fairly often return an error on compression that we were treating
as an error for printing, change it to a NOTCELOG instead of an error.
Change-Id: Id842064b7d659f7ad7f9d785ffffdc6b827f6989
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463369
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Changed to 17 from 32 per conversation with Jim and moved to
header file so it can be shared with the vbdev module.
Change-Id: Ic516b6466bf21d21d8073e9180deaa9929c6b742
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463368
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Old name was misleading due to earlier changes
Change-Id: Ic04223db983e98c9703a43e6778b0094f99bc81d
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463341
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
qpairs can be limited by the compression polled mode driver or
system resources and we need one per thread so if we run out we
have to fail the callback.
Change-Id: Ibd07d9c65880e7de321c439119aed479ef00746c
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463339
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
If a write operation comes in and is not a read-modify-write but
we don't end up compressing the data (because of either error or
we decide the compression ratio isn't good enough) then we not
only need to copy the data to the host buffers but we need to
zero any offset and/or remainder in the decomp scratch buffer.
Change-Id: Ifb2235507826f9ef1110dd9dbaf88045d8979e7c
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463337
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
When connecting to an iscsi url that effectively does not exist we free
the data structures of the very context we are processing. This results in a
use after free and subsequently in a crash.
Signed-off-by: Jeffry Molanus <jeffry.molanus@gmail.com>
Change-Id: I67cab1efb161bfa23fa1022e150661080d90b556
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462614
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Jeffry Molanus <Jeffry.molanus@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
- New files and updates to existing SPDK files to add the NVMf-FC transport.
- Depends on an existing low level driver library. This driver is not part of SPDK repository.
- Makefile updates to build FC transport (using CONFIG_FC)
- Update configure script for FC build.
- New FC unit test for FC-LS commands.
- Update unittest.sh to run FC unit test (when built).
Signed-off-by: John Barnard <john.barnard@broadcom.com>
Signed-off-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Change-Id: If31d4d25feab76c2dbe90a7faf71d465c2c3a354
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450077
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Phenomenon:
Test case: Using the following command to test
./test/nvmf/target/shutdown.sh --iso --transport=tcp
without this patch, it will cause coredump.
The error is that the NVMe/TCP request in data buffer
waiting list has "FREE" state.
We do not need call this function in
spdk_nvmf_tcp_qpair_flush_pdus_internal, it causes the
bug during shutdown test since it will call the function
recursively, and it does not work for the shutdown path.
There are two possible recursive calls:
(1)spdk_nvmf_tcp_qpair_flush_pdus_internal ->
spdk_nvmf_tcp_qpair_process_pending ->
spdk_nvmf_tcp_qpair_flush_pdus_internal ->
>..
(2) spdk_nvmf_tcp_qpair_flush_pdus_internal->
pdu completion (pdu->cb)
->..
-> spdk_nvmf_tcp_qpair_flush_pdus_internal.
And we need to move the processing for NVMe/TCP requests
which are waiting buffer in another function to handle
in order to avoid the complicated possbile recursive
function calls. (Previously, we found the simliar
issue in spdk_nvmf_tcp_qpair_flush_pdus_internal for
pdu sending handling)
But we cannot remove this feature,
otherwise, the initiator will hang for waiting the
I/O. So we add the same functionality in spdk_nvmf_tcp_poll_group_poll
function.
Purpose: To fix the NVMe/TCP shutdown issue.
And this patch also reables the test for shutdown and bdevio.
Change-Id: Ifa193faa3f685429dcba7557df5b311bd566e297
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462658
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds measurement of time request spends from the moment it
was polled till completion.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I1fcda68735f2210c5365dd06f26c10162e4ddf33
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445291
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch adds statistics for pending state in NVMf RDMA subsytem
which may help to detect lack of resources and adjust configuration
correctly.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I9560d931c0dfb469659be42e13b8302c52912420
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452300
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
RDMA polling statistics: number of polls and number of completion
entries returned.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: Iabcf2cb6f6a35f595b89b58cdfcd177a637dda13
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445289
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch adds transport part to nvmf_get_stats RPC method and basic
infrastructure to report NVMf transport specific statistics.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: Ie83b34f4ed932dd5f6d6e37897cf45228114bd88
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452299
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If available, if not use the bdev unique name. This results in
a much friendlier comp_bdev naem for the user. For example,
now it would look something like this: COMP_lvs0/lvs as opposed
to like this COMP_0b149b31-b66b-4cf7-ab39-a55b50788cd1
Change-Id: I319a141221ed8880edcec930ca5be9f256b105e0
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463246
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Was previously creating the number of qp based on the # of cores
reported via DPDK function. Also was assigning one qp per comp_bdev.
After testing w/multiple threads in fio 2 things needed to change:
* remove use of rte core related functions as fio threads are not EAL
threads. This required choosing an upper limit for the number of
threads that the bdev module will support
* changing the qp assignment code such that comp_bdevs share the
same device_qp if on the same thread
Fixes issue #879
Change-Id: Ib968ee04bef63013616546341974a4431d8f266a
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463107
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Rust lang has notion of empty value `()` which is translated to json null
value using serialization library like serde. Thus it means that jsonrpc
methods having no parameters translate to parameters with null value (as
opposed to a request without parameter member as it is done now in spdk).
This change handles null parameter gracefully instead of returning an
error - improving interoperability with such clients.
Signed-off-by: Jan Kryl <jan.kryl@mayadata.io>
Change-Id: I8c3cc5613582aebb10ac6eaee3ac4e6538aaa0b1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463171
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Had used a few different means to determine if there's space
remaining in a chunk after accounting for offset and host data,
just making them all consistent. Nothing functionally changes.
Change-Id: Iffd3b0b6d8ab1253f5b1bebda88d6f63d5061e19
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463023
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The function didn't do anything.
Change-Id: Id44a7d0c129ab60751eda382911935d677730ec9
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463066
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Remember current write position within the cache when shutting down. It
allows for faster recovery after clean shutdown (no need to scan the
device) as well as grants a quick way to distinguish between clean and
dirty shutdowns.
Change-Id: I79c22caa0b1ca4373951ac43f747b085d331cdd0
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460796
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Moved metadata header verification to a separate function, since the
metadata read callback got pretty large.
Change-Id: I0c8b2eb493631a6495ce2ef7d9586d2c7cb7772f
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460795
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Global tgt->discovery_log_page may contain old hostnqn log
page, so we will update the discovery log page if the offset
is zero.
Change-Id: Iba24409b16626d157d2782c6813fe5a0c27f1082
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463123
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <shahar.salzman@kaminario.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch updates net/vpp implementation from version VPP 19.01 to
VPP 19.04.
1. Some binary APIs are deprecated in 19.04 and message queue is used
to handle control events:
- vl_api_bind_sock_reply_t_handler by SESSION_CTRL_EVT_BOUND,
- vl_api_unbind_sock_reply_t_handler by SESSION_CTRL_EVT_UNLISTEN_REPLY,
- vl_api_accept_session_t_handler by SESSION_CTRL_EVT_ACCEPTED,
- vl_api_connect_session_reply_t_handler by SESSION_CTRL_EVT_CONNECTED,
- vl_api_disconnect_session_t_handler by SESSION_CTRL_EVT_DISCONNECTED,
- vl_api_reset_session_t_handler by SESSION_CTRL_EVT_RESET
2. Fixes for Fedora 29/30:
- added "-Wno-address-of-packed-member" (DPDK 19.02 fails to compile
with gcc9.1),
- force "-maes" compile flag for gcc9.1 to compile crypto_ia32 and
crypto_ipsecmb plugins (gcc9.1 doesn't do that for -march=silvermont)
- some minor fixes
3. Default path for VPP instalation is changed for test scripts from
/usr/local/src/vpp to /usr/local/src/vpp-19.04 to avoid VPP version
conflict.
Change-Id: I1d20ad7f138f5086ba7fab41d77d86f8139d038e
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459113
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
No functional changes done, just reordering for next patch in series.
Change-Id: I32022fddffbc7b00eeecb29a2fcbaa85fbf2e99f
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462473
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In case shutdown occurs during band relocation
we can have situation that on retry queue are
some internal IOs and we need to wait to drain
this queue before we start shutdown sequence.
Change-Id: Ie5b33732568aeda0586f4de384b22dcf463bf31e
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460421
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
It's possible there's a delay between spdk_ftl_dev_free setting
dev->halt and sending message to core thread which would set
reloc->halt. This patch should bridge this gap and prevent potential
additional/unneeded relocations from happening.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I3d69fe86900c9233fadd8e3795accb36b1c01791
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461598
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If the data was not compressed for whatever reason, it needs to be
copied from the host buffers much in the same way as the patch before
this did.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I5c92db16afbce3ca573c556ee78a51ba6511c564
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462895
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If the decompression code path runs into a chunk that wasn't
compressed, the data needs to be copied to the host as the
compression engine was not engaged.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ibabd6d6bd2bc5db79953a0a55d7f49d556c08af7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462892
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This fixes a segfault found by using a very small logical volume.
The PMEM file chunk map area wasn't including the chunk map struct
itself. In PMEM, a single entry as returned by _reduce_vol_get_chunk_map()
is made up of a 'struct spdk_reduce_chunk_map' plus one uint64_t for
each backing IO unit for the volume (# depends on vol parms). So when
an app got close to the end of the chunk map indices it would run off
the end of PMEM and segfault.
With this fix that no longer happens however data integrity issues now
show up with fio. I believe this fix is valid though and am pursuing the data
integrity issue as something new.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I69a223064c7bbd44bcd0a62d155cf409603970a3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461316
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Improve error messages where possible.
Also change return code values to negative in bdev_pmem.c so that
it follows the same pattern as other bdev modules.
Change-Id: I81b205a41104e15457154d1e31540210636ef9d3
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461548
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Added parsing and saving of (optional) parameters which are responsible for
relocation in FTL. Changing the parameters may affect Write
Amplification Factor and overall performance, especially during random
write workloads. If parameters are not specified, default values will be used.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: Ic0229e39109460f3541c31e1cbf2a485efe408c6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460504
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Changed write_config to use the ftl configuration file instead of
allow_open_bands directly. This allows for easier expansion of saved
fields.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: Ie1d480983636f26840dba9a3a6c93b2883903bdb
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460519
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fixed touching NULL write pointer, which would happen after some other
I/O in the same band would receive error and issue its deletion. Any
subsequent write callbacks would then be unable to find and update the
information.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I07d9791f1b1b673a48356fae55b784c0bf6a6f7a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462387
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
At the start of time all of values of io_unit_index[] array in
the chunk maps are FF's. When a partial chunk is written, only
some of the io_unit_index[] vals will be assigned values from the
allocated_backing_io_units bit array. When that chunk is written
again, it is not done so in place and at that time in when
_write_write_done() is called, the io_unit_index[] values are
set to FF again and the bit array bits are cleared for the old
chunk so that it is fresh again for use by another write.
This change removes code from an early stage of the write process
where a 'fresh' chuck in allocated. Because of points made earlier,
it is not possible for any of the io_unit_index[] values to be
assigned or have a corresponding bit set in the bit array.
The prev version of this patch cleared the bit array because the
io_unit_index[] array was being cleared however after further
investigation, and for the reasons stated earlier, the io_unit_index[]
did not have a valid value so clearing the bit array was simply wrong.
Removing this dead code clears things up and leaves it to one place
to clear the io_unit_index[], when a chunk is overwritten. Well, 2
places including init time.
Change-Id: I5c4e5360c9c13817d2fa7d3c7d004b44537af7f4
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458520
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The value of tcp_req->req was asserted after it was already
dereferenced. This patch fixes that.
Change-Id: I5eb01e88be09d41fb8e632c49d5a7ccf2315788f
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462508
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
spdk_nvme_ctrlr_get_ns() can return NULL, which was
not verified, but dereferenced anyway.
Change-Id: Ib0554148cc47ea3ff2afa1862ac962f284fe6d43
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462486
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is just assert to assure the Klocwork
static analizer that wptr is not NULL.
Change-Id: I003620431afb8497a57c50af8480c34ec3fac6d6
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462489
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Initiator can use `nvme discover` command to display all
the subsystem's information, because we don't check
the allowed HOSTNQN for Discovery service, so here
adding this feature so that only return the log pages
to the allowed hosts.
Fix issue #576.
Change-Id: I51e6770bd67ea0b41caf9de3a8899923377e6255
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462440
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
When creating a new controller in the NVMe-oF target, hostnqn is
a must parameter, so we save the hostnqn to controller data
structure, and it can be used to verify the access right of
Discovery service.
Change-Id: I86a6f50d3209d5bbb8ac85508288173d826ea216
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462439
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Scan-build complains that spdk_vtophys_notify() can segfault
on vaddr == 0. We know that and it's not a programming error.
In fact, SPDK with UIO pci driver can segfault upon registering
any non-mapped memory address. The user is just not supposed
to do that.
Assert vaddr != 0 to silence scan-build.
Change-Id: I9a14696361eca0aeea5ede9f9f2956fcbf59bdb5
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462869
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Scan-build has a real issue with reallocs. The original
error from latest version of scan-build is rather complicated,
but it can be greatly simplified with the following change:
> diff --git a/lib/blob/blobstore.c b/lib/blob/blobstore.c
> index 7580c9dd2..6a594edf3 100644
> --- a/lib/blob/blobstore.c
> +++ b/lib/blob/blobstore.c
> @@ -1147,8 +1147,9 @@
> _spdk_blob_persist_clear_clusters_cpl(spdk_bs_sequence_t *seq, void *cb_arg, int
> } else if (blob->active.num_clusters != blob->active.cluster_array_size) {
> tmp = realloc(blob->active.clusters, sizeof(uint64_t) * blob->active.num_clusters);
> assert(tmp != NULL);
> - blob->active.clusters = tmp;
> - blob->active.cluster_array_size = blob->active.num_clusters;
> + ctx->blob->active.clusters = tmp;
> + assert(ctx->blob->active.clusters[0] != 14213);
> + ctx->blob->active.cluster_array_size = ctx->blob->active.num_clusters;
> }
>
> _spdk_blob_persist_complete(seq, ctx, bserrno);
> ```
Scan-build will then complain:
blobstore.c:1151:10: warning: Use of memory after it is freed
assert(ctx->blob->active.clusters[0] != 14213);
Asserting blob == ctx->blob, blob->active.clusters == ctx->...,
or even tmp != blob->active.clusters doesn't work, so use the
last resort scan-build weapon - #ifdef __clang_analyzer__.
The realloc in this case is just down-sizing a buffer to
save some memory. For scan-build, just don't do it. This
finally silences all scan-build false positives.
Change-Id: Ib88ea145370f5035eedd2412e98ee61f96ad1915
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462868
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
qpair structure is freed and an error code is returned to the caller in the case of failed qpair initialization in function spdk_nvmf_rdma_qpair_initialize (e.g. bad return value of rdma_create_qp).
The return code is handled by nvmf_tgt_poll_group_add function which destroys the qpair for the second time.
This patch fixes#857
Change-Id: I0773652ecccbbd634ad272106e0a93c1e591d7d2
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Evgenii Kochetov <evgeniik@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462011
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Lorne Li <lorneli@163.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
ftl_io_free() handles NULL io being passed, but shouldn't
dereference it before returning.
Change-Id: Ia705d4ab9f8b3569e9704a1f97e70f7579084efb
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462487
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
First check both vmd_pci_device for not being a NULL,
same as vmd_adapter structure being present.
Otherwise dev was dereferenced before checking for NULL.
Change-Id: I3719f33c1762f789b0eb63b0f2ddce8258843ded
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462509
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Func spdk_nvmf_rdma_destroy_defunct_qpair is a "last chance option"
to destroy qp manually if some driver/hardware doesn't drain qp's
failed wr as expected.
There's a probability that ibv_poll_cq polls wr of the destoryed qp
after spdk_nvmf_rdma_destroy_defunct_qpair's execution. Although in
practice the risk of this situation is minimal(if not non-existent),
add a log here so that we could detect this situation easily.
Change-Id: Ifa9534397513bcea34c18fbb8168eef8f53599c1
Signed-off-by: lorneli <lorneli@163.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462441
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently rqpair will be destroyed directly in ibv_poll_cq path
if it has been drained, regardless of whether there are outstanding
I/Os issued to bdev layer. So after outstanding I/Os completing,
spdk_nvmf_rdma_close_qpair will be called from nvmf layer, accessing
a destroyed qp.
This path defers qp destruction in nvmf_rdma_destroy_drained_qpair
func until nvmf layer closes qp.
Fixes 851
Change-Id: I8bcce66f8053ddb105702ac603d5d73af54bdcfc
Signed-off-by: lorneli <lorneli@163.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461237
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Since 4k alignment is no longer required for I/O buffers, the
band doesn't need a separate lba map and dma buffer and can use the
same memory location.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: Iea127e8c2f39e6de5d57258098b2dc6be56f439f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462042
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Ftl should no longer require 4k alignment for I/O buffers for either
internal or external requests. The 4k alignment was needed due
to a bug in QEMU when handling internal SGL buffers in LNVM commands.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: Icafc14b7811c9c0ffa13789e341c453503cf2821
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460106
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
DPDK defines the minimum alignment as "suitable for any
kind of variable (in the same manner as malloc())", but
internally the alignment is always rounded up to the
cache line size, even if the requested alignment is 0.
We would like to start relying on this behavior in FTL,
where lba maps are allocated using DMA-able memory and
are constantly looked up or modified by different threads.
By having the lba maps unaligned, we risk having those
threads pollute each other's cache lines.
Rather than enforcing this memory alignment in FTL, we
do it in spdk_*malloc directly. In general it makes
sense to have DMA-able memory always cache-line-size
aligned for the same reason as above.
Change-Id: Ib6edda4a7bf3f4952eb1875a4e1753be96bed642
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460329
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If the log level of the output log is higher than
the process's log level, the system does not output
it, so we needn't generate the formatting logs.
Change-Id: I36be0e6807ed575fcbf1d0ae01f064a6ca2c4539
Signed-off-by: Huiming Xie <xiehuiming@huawei.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462790
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Issue reports:
vbdev_crypto.c:695:12: warning: The left operand of '+' is a garbage value
iv_ptr = rte_crypto_op_ctod_offset(crypto_ops[crypto_index], uint8_t *,
Change-Id: I1a4f89111e94a13d8daf38070aa69306783a83c5
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462576
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
During PCI bridge initialization not all
registers was cleaned properly.
Change-Id: Ie0752bb303ba06e2a21669908efd9f746f6b0039
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460197
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
On Fedora30, GCC9+ reports errors:
Issues report:
vbdev_compress.c:482:17: warning: Assigned value is garbage or undefined
comp_op->m_src = src_mbufs[0];
^ ~~~~~~~~~~~~
vbdev_compress.c:502:17: warning: Assigned value is garbage or undefined
comp_op->m_dst = dst_mbufs[0];
^ ~~~~~~~~~~~~
vbdev_compress.c:491:3: warning: 1st function call argument is an uninitialized value
rte_pktmbuf_attach_extbuf(dst_mbufs[iov_index],
compress_ut.c:826:2: warning: Attempt to free released memory
free(g_mbuf_mp);
^~~~~~~~~~~~~~~
Should remove free(g_mbuf_mp), for pointer exchange.
Change-Id: I1a48b7c309a4e2aa0aa513f9be44ae3504d9e385
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462574
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
As spdk_jsonrpc_begin_result() is not allowed to return NULL we can
remove these checks. We didn't have any tests cases that goes this path
anyway.
Change-Id: I0894e76c0162591e550e70b172566b9060a6dd5f
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459199
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Code on line 613 should never be reached for last
chunk on the band, since it is checked on line 606.
This assert verifies that, all chunks before last
are not NULL.
Change-Id: I78a9967f91c0873981b3308e888d85fa7c8d6641
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462488
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Moved the spdk_bdev_io_get_iovec() after the verification that io
succeeded.
Then added return path when iov could not be retrived from bdevio.
Change-Id: I2638e6657fd08a2dd85ab0906383cecef8fb4f4a
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462507
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Admin can enable user and add user to locking range.
Then the user can lock/unlock his range.
Change-Id: Ifc5a8cf5c6b5febeb59c86333981f0cf5b938500
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460891
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There are many req leaks when a controller failure
occurs during submitting IO. It must free all of
the children before freeing the parent req.
If a part of the child req has been sent to the back end
and a part of the child req fails, removes the failed req
from the parent req and the parent req must be retained,
freeing the parent req after all of the submitted reqs return.
Change-Id: Ieb5423fd19c9bb0420f154b3cfc17918c2b80748
Signed-off-by: Huiming Xie <xiehuiming@huawei.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Existing children split functions defined in nvme_ns_cmd.c can
also be used in nvme_qpair.c to free children requests with error
paths.
Change-Id: I640b32884424709da67ee89ff780c2de45acc54c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461372
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
move the staement location of TCP request setting and remove
the duplicated code.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ia659756185547ff4f8aa26c5bc01f63defe6c113
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462589
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We already have send buffer allocated. This will greatly improving code
as we guarantee by design that there is always JSON write context
object.
Change-Id: Id487c01448e1a65d9d4ef76d40a2a9f178b2f570
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459341
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This priority is used to differentiate the sock priority on the TCP connections
between NVMe-oF TCP target and other TCP based applications.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I6ee294e647420b56d1d91a07c2e37bf34ce24e03
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461801
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If subsystem bdev module initialize failed, it will call
spdk_bdev_init_complete(-1) -> (subsystem bdev)->fini
_spdk_bdev_finish_unregister_bdevs_iter -> spdk_bdev_module_finish_iter
In abovt path, spdk_bdev_module_finish_iter will repeate to call
bdev_module->module_fini function. Some bdevs will call spdk_io_device_unregister
which never call spdk_io_device_register. It will coredump when assert false in
spdk_io_device_unregister dev is null.
To fix this, let's check whether g_bdev_mgr.module_init_complete is equals true
and then call the bdev_module->module_fini.
Change-Id: Ia9a13318720d954e40eb2d666574bcb86e5f49e3
Signed-off-by: Tianyu Yang <yangtianyu2@huawei.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462382
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Improve error messages where possible.
Modify spdk_bdev_rbd_create() to return instead instead
of pointer for better return code handling.
Change-Id: I5fcf90794f5fe44296422c654c5f8d404f3d5eef
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461884
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Adding some extra debug information for any failing IOs.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: If38de30bcb80d291778ad7325a33b7786d02390d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461588
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These arguments are obligatory and spdk_json_decode_object will
fail even before we reach the if block.
Change-Id: I3c17faf570aefc7d96d009a595cf3a76994977e7
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462043
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Improve error messages where possible.
Modify parts of the code so that it follows the same pattern
as in previousle changed bdev modules.
Change-Id: I6672a14900326029c670bfca99a6d085093861c3
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461553
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Purpose: This API can be used to set the socket
with different priority.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I9df1122bf6ae640eba731e635a1784f4e9da4104
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461738
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
lvol_name is not an optional argument when creating a lvol bdev.
Also removing unnecessary if block.
Change-Id: I7d5790d648bce7f02bfed34bd714162d3ccb10ab
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461861
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
These arguments are obligatory and spdk_json_decode_object will
fail even before we reach the if block.
Change-Id: I295649629770ef062086308257da83a8bab44588
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461860
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Eliminates need for memset on parts of our scratch buffer
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I00b7213d3c15562ceeda4d7a3ac2bb7cfd41bf66
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460010
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Purpose: To eanble the transport based scheduler in RPC.
Previously, we only support it with configuration file.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I02ae9b1b316d4fec8b28b550e70dcdc78ce78722
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461645
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: I5bcac50baca785255eb068086e67c07d120b042f
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459432
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: Ic42db528bbae4b3ca2e91cb9ac46def99ecb5f28
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459431
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: If0bcdf2be9756b343375f02837a414d3b86f2bca
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459430
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
No need to have it under lock. Additionally in case of failure
there was a lack of rdma_destroy_id(). This is addresed within this
change as well.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Idbb36d51ad4ef7ef81051463f56efc87ef00c966
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462054
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In case of failure during pd or map allocation freeing list of devices
was missing.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: If62f7b072f3894fd1a7e856c19b4ea51646dd20e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462079
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Remove linux #ifdefs from the vhost code and just
implicitly disable CONFIG_VHOST for BSD systems.
This serves as cleanup.
Change-Id: I8b0e0e8f80478f50ca8586cc974f7afcee2566f0
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460562
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Now that vhost closes bdev descriptors on the same thread
that opened them, we can reintroduce thread asserts into
the bdev layer.
This reverts commit 283abcb9a2.
Change-Id: I1acc455df0674b808ecf2fa58dffd183db6cf3c2
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459168
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We used to allocate a ctx whenever new event had to
be sent, but since all events in foreach_session are
always called in a chain, we could allocate one ctx
at the start and then re-initialize it before sending
each msg.
Change-Id: Ie5477b07242f0c6eb6dc2160055a829da8ba5d11
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459167
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
foreach_session() is used to e.g. close a bdev, where
for each session we close any io_channels and then,
on the final "finish" call, close the bdev descriptor.
The vhost init thread is the one that called
spdk_vhost_init() and also the same one that calls
all management APIs. One of those is for hotplugging
LUNs to vhost scsi targets, which practically results
in opening bdev descriptors.
By always scheduling that final foreach_session()
callback to the init thread, we end up with calling
spdk_bdev_close() always on the same thread which
called spdk_bdev_open(), which is actually a bdev
layer requirement.
Change-Id: I2338e15c63f93ef37dd4412dd677dee40d272ec2
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459166
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We used to call potentially-asynchronous foreach_session()
in vdev initialization path and that was perfectly
fine because at that time there were no sessions created
and foreach_session() was always finishing synchronously.
We're about to refactor it to be always asynchronous, and
for this coalescing case it could complicate the init
error path. Once asynchronous thread msg is sent, we would
need to wait for it to complete and we just don't want to
do that. We want error handling to be simple.
Since we know there are no sessions at the time of vdev
creation, we just add a new function for setting coalescing
params just for vdev (and not for its sessions) and we
use that function in vdev init code.
Change-Id: I44d204d03b5040525e4871693678d4b4a0204e63
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459196
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Put it next to other functions in this call chain.
Change-Id: Ic621855b028f9bd110cdcda86b3a182369ec5e90
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459165
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Put it next to other functions in this call chain.
Change-Id: Ieafd91c6cfefec134594aec8671eb4efdac15dfe
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459164
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_ prefix should be only used on public API functions.
Change-Id: I663b107bd6b1c92c2c6263f2ec7c763d9812e7fe
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459163
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Despite its name, this function is defined as static
and is only used in one place, so inline it.
Change-Id: I4e217b3baae9b735761f5497f06b681a118860e9
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459162
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
By making dpdk device detach asynchronous we have
actually broken some cases where devices are re-attached
immediately after and fail since they were not detached
yet, so now we're making device detach synchronous again.
For that we'll simply wait inside spdk_pci_device_detach()
for the background dpdk thread to perform all necessary
actions before we return. We'll also print an error msg
if DPDK failed the detach (probably because of some
internal error).
Change-Id: I7657ac1b169169eae3325de2d28c2cc311e7d901
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460286
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <jacek.kalwas@intel.com>
By making dpdk device detach asynchronous we have
actually broken some cases where devices are re-attached
immediately after and fail since they were not detached
yet.
We'll need to make detach synchronous again, and for that
we'll wait for the background dpdk thread to perform all
necessary actions before we return from spdk_pci_device_detach().
However, device detach could be triggered from the very
same dpdk background thread as well. Waiting there would
cause a deadlock, so now we'll schedule asynchronous
device detach to the dpdk thread only if we're not on
that thread already.
This patch itself serves also as an optimization.
Change-Id: I86b7ac1b669169eee3325de2d28c2cc313e7d901
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460285
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Latest DPDK moved some definitions around and we don't
compile with it right now. Adding the missing include
fixes it.
Change-Id: I9b0a915632996acfedbcf3d0f03feed986889a2d
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460905
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: I140e10b2fd07efb48e664cfa00e1d60f604abd21
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449797
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In case of pd allocation by nvmf hooks there is a lack of null
check as oposed to pd allocation by ibv_alloc_pd.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Iead6e0332bdee3da4adb6e657af298215c4e2196
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461576
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Since the local is only used in the SPDK_DEBUGLOG call, it was causing
the build to fail when the configure options --disable-debug and
--enable-werror were supplied together. This can be seen in the most
recent nightly builds.
Change-Id: I32112cf832a705292783da4e841badaeed17dbb6
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461746
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This change attempts to address the Trello request to decode I/O errors in
NVMe hello_world example.
See https://trello.com/c/MzJJw7hM/2-decode-io-errors-in-nvme-helloworld-example
As part of this change, spdk_nvme_cpl_get_status_string was declared
in nvme.h, and spdk_nvme_qpair_print_command and
spdk_nvme_qpair_print_completion were renamed and added to nvme.h,
allowing all three to used "externally."
To test the failing paths, two compile time defines were added to force a
write or read error (bad LBA) respectively.
As the example does a read after write, if the write fails, the example fails.
Signed-off-by: James Bergsten <jamesx.bergsten@intel.com>
Change-Id: Ib94b4a02495eb40966e3f49517a5bdf64485538a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457076
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The __sync builtin based implementation generates full memory
barriers on some non-x86 platforms. Replace it with C11 atomic
builtins can make:
·arm and ppc from full barrier to half barrier
·x86 code same as before
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Change-Id: Ib6624ef8e45af497b9eced6ecfa7710bcc88a733
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461590
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
md_start and md_len are values in pages rather than lba.
Those should not be compared against lba of currently
loaded md page.
This patch changes assert to verify if the lba of current
page does not exceed max lba where md is expected to be.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id445eb9871f82f7fe367bfc396f1b495591511c1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460976
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Blob id only is matched to the very first page of md for
that particular blob.
During loading blobstore, we shouldn't verify
further pages in chain against the blobid.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ifc7863ddcb403aedc264c14e6b4c3915bd30dc41
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460607
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This patch adds statistics for BDEV IO pending state in NVMf subsytem
which may help to detect lack of resources and configure pool size
correctly.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I6c60c27efe3efed194b2d2c46a707af7c2808fe9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445290
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This patch adds number of admin and IO queue pairs per poll group in
NVMf statistics. It can be useful to troubleshoot load sharing issues.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I2a9c0fc99cf5d0729eb130d30540ae52b5207fc9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445288
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This patch adds nvmf_get_stats RPC method and basic infrastructure to
report NVMf global and per poll group statistics in JSON format.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I13b83e28b75a02bc1dcb7b95cbce52ae10ff0f7b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452298
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
If the data from non-volatile cache was recovered, but the state of the
cache isn't clean (i.e. no range overlap, two different phases at max),
scrub it, so that subsequent recovery can be performed successfully.
Change-Id: Ic8b5cbb6e02444bc99d4700bfe3dfbb33f06ef24
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459622
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
The cache needs to be scrubbed during the initial device creation as
well as after power loss recovery. This patch extracts the scrubbing
code into a separate function.
Change-Id: I2cb32e6993a3531470f29f466d990f0d96e45def
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459621
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
The header is being written from multiple places, so having a discrete
function serializing and writing it at the appropriate place in the
cache makes sense.
Change-Id: I7a1e6ebd05e8a4974d141f04202803f507b978e4
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459620
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
This patch adds a function that marks all active open bands to be
flushed and once all of them are closed it notifies the caller. This
needs to be done before the data from non-volatile cache can be scrubbed
to make sure its stored on bands the device can be restored from.
Change-Id: I9658554ffce90c45dabe31f294879dc17ec670b9
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459619
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch makes sure we're on the thread that requested creation /
deletion of the device when calling the notification callback.
Change-Id: Ia11a8054692874f6b57d4ebe3e3cb290c58e83b6
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459618
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Added ftl_dev_has_nv_cache to check if the FTL is configured to use
non-volatile cache or not. It makes these checks a bit more readable.
Change-Id: I0140df184d89a675e40bd5056718cd64301c553e
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459617
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Wait until all user writes are completed before writing band's metadata.
Otherwise in case of power loss, user data might not get written while
the metadata does, which would result in data loss.
Change-Id: I419862960c072e38265b91d0d0498ff0c6f9f29e
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459615
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use the data placed on the non-volatile cache to perform recovery in
case the device wasn't shut down cleanly. The write phase ranges are
read and their data is copied onto the OC device.
The code added in this patch will correctly copy the data from
overlapping ranges, however it won't do anything about these overlapping
areas, so subsequent power loss happening quickly after recovery might
result in data loss.
Change-Id: Ib4c66092cee858496ec66f789fcfb1e7e32f5c20
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458105
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Scan the cache to find ranges of blocks written with the same phase.
This prepares the structures needed to perform data recovery from the
non-volatile cache.
Change-Id: I0c901d010d6ca76feabca13116d831c1d9931833
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458103
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
The structures in this module had no comments, so it was a bit hard to
understand what they're used for.
Change-Id: I439c8a792f02b929006c60933e6b272751b1a675
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458102
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Moving data from one band to the other doesn't need to be stored on the
non-volatile cache. Not only does it add unnecessary traffic to the
cache (wearing it out and reducing its throughput), but it requires us
to synchronize it with user writes to the same LBAs.
To avoid all that, this patch adds the FTL_IO_BYPASS_CACHE flag to all
writes coming from the reloc module. However, to be sure that the moved
data is stored on disk and can be restored in case of power loss, we
need to make sure that each free band have all of its data moved to a
closed band before it can be erased. It's done by keeping track of the
number of outstanding IOs moving data from particular band
(num_reloc_blocks), as well as the number of open bands that contains
data from this band (num_reloc_bands). Only when both of these are at
zero and the band has zero valid blocks it can be erased.
Change-Id: I7c106011ffc9685eb8e5ff497919237a305e4478
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458101
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Some of the writes doesn't need to go through the non-volatile cache
(e.g. relocations, data recovery from the cache). This patch adds IO
flag to indicate that the write shouldn't be stored on the non-volatile
cache.
Change-Id: I3d485fe14cf25b3074832f26491ba0cb12ff0e58
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458100
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Initialize children IOs with the appropriate LBA of its parent when
allocating internal IOs.
Change-Id: I191ad741b9d88d7f18cae05982e0a06a8f371f78
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458099
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
This patch adds tracking of the phase of the writes to the non-volatile
cache. The phase is changed each time the whole buffer is filled. Along
with every block's LBA, current phase is stored in its metadata. This
allows for replaying the sequence of writes when recovering the data
from the cache after (unclean) shutdown.
Since there are only three possible phases to be stored on the device at
a time, phase is defined as a 2-bit counter cycling through 1 -> 2 -> 3
-> 1, with 0 marking blocks that were never written.
Change-Id: Id47880367934027fd102c32f183110acc9d4c62a
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458098
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
After filling whole non-volatile cache, block all further writes until
the header with metadata is written. This means that metadata stored on
the device will always be up-to-date with the most recent write
sequence.
Change-Id: I15b724b52814289622374ce77e5c3b23173a75c6
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458097
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Check the type of DIF used by the bdev specified as the non-volatile
write cache. If it's anything other than SPDK_DIF_DISABLE, fail the
initialization, as we don't support any other type yet.
Change-Id: Ie8bc1729558e055989d7925bc55f6307ee738f0e
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458096
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
When restoring the device, read the first block of the non-volatile
cache containing its metadata header and verify that it's indeed a
device that was used as write cache.
Change-Id: Idf113a9e8eb73160a2d9e6e882c9e026d3fafb3e
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458095
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When creating FTL device using non-volatile cache, zero out the
non-volatile cache and store metadata (device's UUID, size of the cache)
in the first block.
Change-Id: Id8f212aef756e86e8a215582ab7c32a635e18938
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458094
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
In case some module has `async_init = true` and
some other module that comes after it fails to initialize,
then callback from asynchronously initialized module
may call `spdk_bdev_init_complete()` first, then failed module
will call `spdk_bdev_init_complete()` later.
This currently results in NULL dereference because
first call to `spdk_bdev_init_complete()` sets `g_init_cb_fn = NULL`.
This change prevents first call to `spdk_bdev_init_complete()`
by saying that failed module is not finished with initialization.
This patch fixes#847
Change-Id: Ib6b231d5ea27896ad88d7f11b8732921077b3d4d
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461230
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
In the memcpy elimination patches, the same bug exists in 3
places. When building req->decomp_iov using the host buffers,
req->decomp_iovcnt was being incremented in the loop and also
being used as part of the index messing everything up.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I485ac32502801c1e11b8392b2df7eba06b4f5a9b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461053
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The first optimization to eliminate memcpy was too aggressive and
did so for the read-modify-write operation as well. This didn't
affect the fio tests used that the time but bdevio catches it
right away. When over writing a chunk with data, we first need
to read the old data before applying the new. This patch uses
the scratch buffer for old data as sending it to the user buffer
results in it not being written at the end of the read-modify-write.
There is at least one more bug fix coming after this also found
with bdevio but passed with fio
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I8fe074056434bb4757c68077e2df446861edfd94
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461032
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
iSCSI target does not allocate data buffer on read, and delegate
allocation to the bdev.
When the bdev is a split vbdev, the split vbdev does not allocate
data buffer and delegate allocation to the backend bdev.
In this case, iSCSI target expects the buffer is allocated until
notifying completion to the split vbdev. However, the split vbdev
notifies completion to the backend bdev when calling the callback
of iSCSI target. The backend bdev frees the buffer immediately,
but iSCSI target still uses the buffer. If the buffer is reused
by another I/O, data corruption will occur.
For this issue, vbdev_gpt_submti_request() calls
spdk_bdev_io_get_buf() when the I/O is read, and its callback
vbdev_gpt_get_buf_cb calls _vbdev_gpt_submit_request() then.
This will ensure the buffer is allocated before forwarding I/O
to the backed bdev.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifb2eac500276ab5012123b7d6f7eb033d87ad17c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461350
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
iSCSI target does not allocate data buffer on read, and delegate
allocation to the bdev.
When the bdev is a split vbdev, the split vbdev does not allocate
data buffer and delegate allocation to the backend bdev.
In this case, iSCSI target expects the buffer is allocated until
notifying completion to the split vbdev. However, the split vbdev
notifies completion to the backend bdev when calling the callback
of iSCSI target. The backend bdev frees the buffer immediately,
but iSCSI target still uses the buffer. If the buffer is reused
by another I/O, data corruption will occur.
For this issue, vbdev_split_submti_request() calls
spdk_bdev_io_get_buf() when the I/O is read, and its callback
vbdev_split_get_buf_cb calls _vbdev_split_submit_request() then.
This will ensure the buffer is allocated before forwarding I/O
to the backed bdev.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Icfd0663b548479ac0bf6b5b49420f144142e3300
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461348
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Now that the resume path can correctly handle the case where a namespace
was removed and a new one added with the same nsid, this no longer needs
to be asynchronous.
Change-Id: I693045e66a7d4e75255b526d8f5ca5ef8695533e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459606
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When using stacked virtual bdev (e.g. split virtual bdev), block
address space will be remapped during I/O processing and so
reference tag have to be remapped accordingly.
This patch adds an new helper function spdk_bdev_part_remap_dif
and call it before submitting write I/O or after completing read
I/O.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idfc6081893861d412c19a9edfb348a7faa7e8c5b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461106
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
All IO types but reset have used the remapped offset to submit I/O
to the base bdev. Previously each IO type had got the remapped
offset by itself. Consolidating it into a place will improve
readability and will be helpful for the next patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I29465e92d8fb62e45cfc97c52fedaa661b2f0602
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461105
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When using stacked virtual bdev (e.g. split virtual bdev), block
address space will be remapped during I/O processing and so reference
tag will have to be remapped accordingly.
This patch adds an API, spdk_dif_remap_ref_tag to satisfy the case.
UT code is added together in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I55cc45c475d4e86e736f5712baf02fcabfde3c82
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461104
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When using stacked virtual bdev (e.g. split virtual bdev), block
address space will be remapped during I/O processing and so reference
tag will have to be remapped accordingly.
The use case is explained in detail as follows:
- Format a single NVMe SSD with DIF enabled.
- Create a NVMe bdev on the NVMe SSD with DIF enabled.
- Create four split vbdevs on the NVMe bdev.
- Add the split vbdevs to a NVMe-oF target.
- Application is aware of block address space of the split vbdevs.
- Application submits read/write I/O to the NVMe-oF target.
Case 1:
- Configure NVMe-oF target to DIF pass-through.
Case 2:
- Configure NVMe-oF target to DIF insert/strip
For the case 1,
- Application inserts DIF for write I/O and verifies DIF for read I/O.
- The split vbdevs remaps reference tags of DIF both for read and write
I/O because application expects reference tags are based on the
block address space of split vbdevs.
- The NVMe bdev processs read/write I/Os without remapping reference tags
because reference tags are already based on the block address space
of the NVMe bdev.
For the case 2,
- NVMe-oF target inserts DIF for write I/O, and verifies and strips
DIF or read I/O.
- The split vbdevs remaps reference tags of DIF both for read and write
I/O because NVMe-oF target expects reference tags are based on the
block address space of split vbdevs.
- The NVMe bdev processs read/write I/Os without remapping reference tags
because reference tags are already based on the block address space
of the NVMe bdev.
This patch adds two APIs, spdk_dif_ctx_set_remapped_init_ref_tag
and spdk_dif_remap_ref_tag to satisfy the use case.
UT code is added together in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib3101129225b334d2f578eab75197790b1818770
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461103
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In future patch in new spdk_bdev_open_ext function we will call
spdk_bdev_get_by_name function and after that call and before
calling old spdk_bdev_open routine bdev can be removed.
We need to add mutex which will prevent that. Any future code
should use this mutex when accessing the bdevs list to get
a bdev and perform some operation on it.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I785a1791346aebdd394fc51ad0e7fbfbabf317c9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458457
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Length of xattr descriptor is equal to length of xattr struct,
xattr name and the len of stored value.
There is no limit to how much can be stored in memory for xattr.
On disk xattr size is limited to single page and within that to
max descriptors that can fit in it.
This size is known at compile time.
Before this patch it was possible to add xattr exceeding
what was possible to be written to disk. This caused issues
when serializing the metadata during spdk_blob_sync_md()
or spdk_blob_close(). Making those fail without specific info
to the user and not actually writting such descriptor.
Since maximum length of xattr descriptor is known at compile time,
this patch compares against this value when setting the xattr.
It will immediately report back to user with error, and will
not store xattr in memory (thus not serialize it).
This patch should not affect any backward compatibility for blobs.
Too large xattrs weren't written to disk before,
API for blobstore stays the same - only reporting ENOMEM
when it should.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6f4af4d079e47f084e20d7a4969d9a78ec1f8610
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460450
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Set DIF context of the corresponding request to PDU when
- processing in-capsule data of the command,
- processing data of C2H PDU, or
- processing data of H2C PDU.
Change-Id: I3a668a55be21dbe2ee6ecf26476290670bd7b4a8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458929
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
When NVMe/TCP initiator transfers in-capsule data, NVMe/TCP has to
process it as in-capsule data. If DIF insert/strip is enabled,
in-capsule data size will be increased by NVMe/TCP target to insert
metadata. However size of in-capsule data buffer had not been
increased, and buffer overflow occurred when NVMe/TCP initiator
transfers in-capsule data to NVMe/TCP target with DIF insert/strip
being enabled.
This patch increases size of in-capsule data buffer size to store
metadata. 16 byte metadata per 512 byte data block is the current
maximum ratio of metadata per block.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I88b127efd7a945bde167a95df19a0b9175cb8cd0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461333
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
We updated readv_offset before generating DIF to avoid adding
the temporary variable _rc in the previous patch, but that caused
write error when inserting DIF.
Fix the bug in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id0788280a83cbea2554c851db77751432fc00cba
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461116
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When handling the capsule command header, call spdk_nvmf_request_get_dif_ctx
by passing the NVMf request and the reference to the DIF context, and set
the flag dif_insert_or_strip of the NVMf/TCP request to true.
spdk_nvmf_request_get_dif_ctx returns false immediately when the
corresponding NVMf controller disables DIF insert/strip.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I16f6b322f2692d5f9653d011a490e7929ec37365
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458928
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
When the NVMf controller's flag dif_insert_or_strip is enabled, DIF is
inserted for write I/O and stripped for read I/O, and the corresponding
NVMe-oF initiator should not be aware of the DIF setting of the
backend bdev.
Hence this patch hides the DIF setting of the backend bdev
when the flag dif_insert_or_strip is enabled.
Change-Id: I3c14880c2e94cba7f76b1bca78afb36bfe884e26
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456731
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The first idea was that the caller of spdk_nvmf_request_get_dif_ctx()
should check if the current transport enables DIF insert/strip before
calling spdk_nvmf_request_get_dif_ctx().
But NVMf controller knows if DIF/insert/strip is enabled now by the
previous patch. Hence spdk_nvmf_request_get_dif_ctx() checks if the NVMf
controller enables DIF insert/strip at its head.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I78253d356b694800c3a9a9608514df58e0c631a6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461314
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Add a flag dif_insert_or_strip to struct spdk_nvmf_ctrlr that indicates
whether DIF insert/strip is done.
Copy the DIF insert/strip setting of the corresponding transport options
to the flag at NVMf controller creation.
The purpose of this patch is to make DIF insert/strip not per-transport
option but per-controller option because we may want to be able to
control DIF insert/strip per controller at some point. Besides this patch
will clean the implementation.
Besides align indent around the change.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I57f65960b430e55f4021ed514aacd85581ff9993
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461313
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Filename should not be an optional argument.
Making it obligatory removes the need for further checks as it
should then be checked in json decode.
Change-Id: Ia779c2623db8d5cdde3983507e3b2b3cfb7e971f
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460958
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
It looks like currently we only check bdev names for NULL, but
not for "empty" string.
For example this rpc command:
sudo scripts/rpc.py construct_aio_bdev aio_disk "" 512
Will result in construction of AIO bdev with empty name:
sudo scripts/rpc.py get_bdevs
[...]
"name": "",
"aliases": [],
[...]
Change-Id: I41204096c8cf210a4dc40a8225d1c9dad353f533
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460150
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Provide more error codes and/or messages then just a
generic "32602 invalid parameters" error.
Change-Id: I1777f454faef336b10af24dda50a2d5b5e73727f
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459948
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If __USE_GNU is set, spdk_strerror()
returns empty string instead of "Unknown error %d".
if unknown error code provided.
The reason is that on unknown errors, `strerror_r()` will
return provided buffer, (in our case, `buf` is returned)
then `snprintf()` will write to `buf` having `buf` as
input argument because `new_buffer` == `buf`, which results in
an empty string.
This patch fixes the above issue by first checking if `buf` == `new_buffer`.
Change-Id: I838ebf47d115b58cee3145991243bc9ebaeb651d
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460825
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch is used to do the following work:
1 It is optimized for NVMe/TCP transport. If the qpair's
socket has same NAPI_ID, then the qpair will be handled
by the same polling group.
2. We add a new connection scheduling strategy, named as
ConnectionScheduler in the configuration file. It will be
used to input different scheduler according to the customers'
input.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ifc9246eece0da69bdd39fd63bfdefff18be64132
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454550
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add the optimal poll group get function.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ia9e57c6924a6563d79269cf535814883e83698cd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454549
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
By capturing this pointer onto the stack, we inform the compiler
that we don't expect it to change. That allows the compiler to
generate more efficient code.
Change-Id: I0f3ff9373662198e915269c4498e4902a2cdb808
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459754
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
This signals to the compiler and analysis programs that this
won't change during iteration, so it may produce better code.
Change-Id: I478c0c9445d4ddf8a69ab1b3deaf628b82a0eaea
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459753
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
For devices that don't have a UUID, the UUID is generated at
registration time. That means that some devices will not have the same
UUID from run to run, but this seems no worse than having no UUID at
all.
Change-Id: Icf6b8517ffcffabafa2b73176dc03d896d0017fe
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459604
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add an new optional parameter dif_insert_or_strip to
nvmf_create_transport RPC.
.INI config file will be deprecated and dif_insert_or_strip is not
supported in .INI config file.
Change-Id: Ibf38b599cff75eeb0056dd2125d6ec10d444f339
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458927
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is a place holder and subsequent patches will use the option
dif_insert_or_strip and provide JSON RPCs to configure it.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7e3fbb1d49c47647a9a0a1a2149152801591b283
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456452
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add a helper function to get DIF context when the passed NVMf request
is for I/O queue, NVMe read, write, or compare command, and its NSID
is valid.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I796c20607c7b64a8be85da5131c5ea95ffd9f8e4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458713
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Add a helper function to get necessary DIF information and set
them into the passed DIF context and return. This function will
be called only when the specific requirement is satisfied and
the caller will be added in the next patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic435886ca936a211f34278b813f547ffa43b9000
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458712
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
`struct option` is set incorrectly for long_opt --huge-dir causing the value
to be ignored.
Change-Id: I5bb84f391e1ac551b2a91c43fe8da658ae54f115
Signed-off-by: Jeffry Molanus <jeffry.molanus@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460581
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When DIF is inserted or stripped,
- in the TCP transport layer, we can use LBA based length throughout, but
- in the NVMf controller layer and BDEV layer, extended LBA based
length must be used, and NVMf controller gets the length from
tcp_req->req.length.
Hence by adding and using two variables, elba_length and orig_length
to struct spdk_nvmf_tcp_req, set the extended LBA length to
tcp_req->req.length before calling spdk_nvmf_request_exec(), and then
restore the original LBA based length to tcp_req->req.length after
calling spdk_nvmf_tcp_req_complete().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9309b8923c6386644c4fd8ef3ee83a19f5d21ce5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458926
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If tcp_req->dif_insert_or_strip, increase the length from LBA based
to extended LBA based by using its own DIF context.
Change-Id: Ie9f5cf757328dda795b43a7b6c70a72259865115
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458925
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The next patch will extend the length from LBA based to extended
LBA based and use it as buffer length to insert or strip DIF.
So cache sgl.unkeyed.length at the top of spdk_nvmf_tcp_req_parse_sgl
and use it throughout.
Besides, one unrelated change-the-line to improve the readability
is included.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2a1dc9379bb5671ec80b5b478504c9879a4f0fff
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458924
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Generate and insert DIF to each data block when reading more than a single
byte.
This update is very similar with the use case of spdk_dif_generate_stream
in iSCSI target.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I063919a32153ac0daf6d6eb1836c0d5995b65d33
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459092
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
nvme_transport_qpair_process_completions calls nvme_rdma_qpair_process_completions
There are some cases return -1 due to failure of "CQ errors".
Handle CQ polling failures by marking the controller as failed.
That a completion with an error will be treated as controller failed.
Requests will be aborted after retry counter exceeded. Otherwise, code will keep on
reporting errors without recovery.
This is to fix issue #850.
Change-Id: I0b324232310e107bf7fd5722aca54d402a19b14d
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460569
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
In file included from bdev_ut.c:43:
/root/yidong/spdk/lib/bdev/bdev.c:4373:9: warning: Access to field 'bdev'
results in a dereference of a null pointer (loaded from variable 'desc')
return desc->bdev;
^~~~~~~~~~
This is related to issue #822.
Change-Id: I8cd2bafadeff9846169bc9ca67b3c4110e9c0da8
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459529
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
nvme_tcp_qpair_process_completions returns -1 on socket I/O
error. Unless the caller checks this return value (which
spdk_nvme_wait_for_completion_robust_lock currently doesn't),
on connection loss or any other fatal connection
error spdk_nvme_wait_for_completion will never exit the completion
check loop.
Change-Id: I92bb349beb071db312e6c31b84db2a7b51ec486c
Signed-off-by: Andrey Kuzmin <akuzmin@jetstreamsoft.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460657
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Also made on the prints a DEBUG message instead and noticed the really
name that was being registered by this component so updated it to
make it look like the rest of SPDK.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I747a846cb365e7db49be50db941e83fb1b265ea0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460244
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Load reservation information based on ptpl configuration file, and
restore the information to NS data structure.
Change-Id: I5f46d49a6d1e6e49aab93ca7cd654469a3a08659
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455912
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If DIF mode is local and C2H data is extended LBA payload, DIF should
be verified just before sending the payload.
Add a helper function nvmf_tcp_pdu_verify_dif and call it in
spdk_nvmf_tcp_send_c2h_data after completing nvme_tcp_pdu_set_data_buf.
When nvmf_tcp_pdu_verify_dif returns error, treat the error as fatal
transport error because the error is caused by the target itself.
Handle the fatal NVMe/TCP transport error by terminating the connection
as described in the NVMe specification.
On the other hand, data digest error is treated as a non-fatal transport
error because the error is caused outside the target. This is reasonable.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9680af2556c08f5888aeaf0a772097e4744182be
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458921
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When we create a base bdev and then create a split vbdev on top of
the base bdev, if we delete the base bdev first, we have no way to
remove the configuration of the split vbdev. Hence even if we
create a base bdev again, we cannot create any split vbdev on top
of the base bdev again.
The meaning of flag, `removed` of `struct spdk_vbdev_split_config`
is not clear and there will be no issue even if the flag `removed`.
Hence remove the flag `removed` in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I053c95e647721004cecfe4fd8b0f1ff5bb9bf38a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460580
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When we run out of bdev_io's child iovs and we had
to round down I/O size to nearest block size boundary,
we used to decrease the existing child_iovcnt and
set a new "child_iov_run_out" flag to terminate the
uppermost splitting loop.
We can get rid of that new flag by just not decreasing
child_iovcnt when rewinding the last few iovs - it
will make the uppermost loop naturally terminate using
the existing checks.
Change-Id: Ie40c7ce135e7fb8fe284afdf7beeebd10af85cb7
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459911
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Compilation Warning on fedora30.
In file included from bdev_raid_ut.c:38:
spdk/lib/bdev/raid/bdev_raid.c:325:11: warning:
Use of memory after it is freed. raid_ch->base_channel[pd_idx],
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This is related to issue #822.
Change-Id: I6432772fb38ca02bc4f0a02a36ed3fe61b8607c7
Signed-off-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460069
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is the first in a series of patches to eliminate memcpy ops
in the comp/decomp paths. Currently the lib uses 2 scratch buffers
and copies all data in and out of them to the user buffers following
a comp/decomp. This patch replaces the memcpy in one of the paths by
constructing an iovec array that points to a combination of the
scratch buffer and user buffer so that user data decompresses
directly into the user buffer and any data in the chunk that isn't
needed by the user will be sent to the scratch buffer.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ib1956875729a82d218527bc81795f750d1df2b89
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459662
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
SPDK NVMe-oF initiator driver could not transfer IO whose size is
more than 128KiB even if NVMe-oF target allows IO whose size is
more than 128KiB both for RDMA and TCP transport.
Some use cases need to transfer IO larger than 128KiB.
For RDMA transport, max_mr_size by ibv_query_device of RDMA devices
indicates the maximum size of a single memory region and is independent
from the actual I/O size, and is very likely to be larger than 2 MiB
which is the granularity we currently register memory regions.
Actually some RDMA NICs return UINT64_MAX for max_mr_size by ibv_query_device.
Hence use UINT32_MAX and let the generic layer use the controller data
to moderate this value.
On the other hand, for TCP transport, there is no limit for maximum IO
size and hence use UINT32_MAX.
Besides, for RDMA transport, max_sges should be the minimum of
max_sge got by querying RDMA devices and NVME_RDMA_MAX_SGL_DESCRIPTORS.
Hence do this change together in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idc813afd3e525bf5f370c0fcd2623f9c146a5528
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459218
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Previously comparing the transport supported value and the target value
was done in RDMA transport layer. However this comparison should be
done in the generic layer like the maximum IO transfer size. Hence
change the comparison to do in the generic layer in this patch.
Besides, for MSDBD, the value 0 indicates no limit but we had handled
this as maximum number of SGS entries was 0 by mistake. This patch fixes
the bug together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I54365cf114169b10180ec2c659f9c7302672674c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459574
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
RocksDB spdk-v5.13.4 and spdk-v5.18.4 still need
to call SpdkInitializeThread in its env init.
Static will trigger make error. Thus removed.
For removing assert, we already have enough check to
make sure the allocate won't happen twice. The assert
here is redundant.
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Change-Id: I058c580349398b83fed8a8408b089e065b5d2988
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460465
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
I used pahole to see whether the alignment of the structure
is reasonable. After reorgnization, we can saved 16 bytes and 1
cacheline according to the information by pahole.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I1347e7c582fe2b00707e2841690b87d53cc61e33
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460572
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: I6fd1106c2278c2ef8899c822e920252f62266547
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459550
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Using naming rules consistent with other related libraries is helpful
to ensure the quality as verified by this patch series.
This patch changes a few parts to use iov and iovcnt for SGL operations.
Besides, name of an array points to the head of the array and is
constant. So copying name of array to an another pointer is not
necessary and can be removed.
Change-Id: I2324f28126b3088098c1c767cf6c060f22c175c3
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455629
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Previously we had used nvme_tcp_pdu_set_data() for incapsule data.
This patch changes handling incapsule data to use
nvme_tcp_pdu_set_data_buf() as same as H2C and C2H.
This unification is necessary to support DIF insert and strip
in NVMe/TCP target later.
Change-Id: I02cae8db94e51cf79a354dd64ad45f0e491ec08e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455920
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
NVMe/TCP target had assumed the size of each iovec was io_unit_size.
Using nvme_tcp_pdu_set_data_buf() instead removes the assumption
and supports any alignment transparently.
Hence this patch moves nvme_tcp_pdu_set_data_buf() to
include/spdk_internal/nvme_tcp.h and replaces the current code to use it.
Besides, this patch simplifies spdk_nvmf_tcp_calc_c2h_data_pdu_num()
because sum of iov_len of iovecs is equal to the variable length now.
We cannot separate code movement (lib/nvme/nvme_tcp.c to include/
spdk_internal/nvme_tcp.h) and code replacement (lib/nvmf/tcp.c)
because moved functions are static and compiler give warning if
they are not referenced in lib/nvmf/tcp.c.
The next patch will add UT code.
Change-Id: Iaece5639c6d9a41bd35ee4eb2b75220682dcecd1
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455625
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
And also add spdk_sock_group_get_ctx function
Change-Id: I2a2a58b0588ff7d99d3538ea0a633a3b8c7a234b
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454538
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Also add the mapping table and the operations between placement_id and
sock_group
Change-Id: I31868e241fdd20252c2d79792ff1239e6d23afb8
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454537
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We should return for the registrant case when the reservation holder
exists.
Change-Id: Ie3cf31554eafdad03294aef2eeb6eaef1536b8c3
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460305
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This will make other structures to allocate struct spdk_cpuset
statically and will reduce potential malloc failures.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I067ec2c79824b04796a8b6f717e610727a861461
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459716
Reviewed-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Maximum size of NQN is already defined to be SPDK_NVMF_NQN_MAX_LEN,
and hence use fixed size string whose size is SPDK_NVMF_NQN_MAX_LEN
+ 1 for spdk_nvmf_vhost::nqn.
This change will reduce the potential malloc failure.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2b9c7cc21200b3e88b5485ebfdcd5040bc6e3589
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459742
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
/spdk/lib/ftl/ftl_reloc.c:507:8: warning: Assigned value is garbage or undefined
move = moves[i];
^ ~~~~~~~~
lib/ftl/ftl_reloc.c:508:11: warning: Access to field 'state' results in a dereference
of a null pointer (loaded from variable 'move')
switch (move->state) {
^~~~~~~~~~~
Change-Id: I9cc1c2b52a93957bb4c56b1ed463c23289b5a43d
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460120
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Handling ANMs on open band leads to many
corner cases in FTL and on the other hand
such event should be very rare.
Disable it until we will have stable test
results from current implementation with
extended dirty shutdown tests.
Change-Id: Id438c7274ed2be1712bf581d6aabfc27bcbd53dc
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459434
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Since spdk_iscsi_conn_read_data() can print error log, so we
don't need to print again in the caller, existing code will
print error log for LOGOUT and DISCOVERY cases.
Fix issue #845.
Change-Id: I547d3d667b6412ab6a59c9b401d0f28c5026307d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460110
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
256 bytes will be enough but not too large for the name of SPDK IO
device. Use fixed size string for the name of SPDK IO device and
reduce the potential malloc failure. If the length of passed name
is longer then 256, it will be cut off without error.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I618b82a1d07769df7c775280fbf364cbcfdde403
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459721
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
256 bytes will be enough but not too large for the name of SPDK
thread. Use fixed size string for the name of SPDK thread and
reduce the potential malloc failure. If the length of passed name
is longer then 256, it will be cut off without error.
Change-Id: I13a24997a73a8365c8bf5e093f2bd78861ba6660
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459720
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Placement_id is related with getsockopt with the optname=
SO_INCOMING_NAPI_ID. For some testing platform, it is not
supported with this macro, so use ifdef to avoid send this
to the kernel.
Change-Id: I9e49e6e15810af0cd5085b92469c15a53ac09ada
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454468
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add file based reservation information definition, the data structure
can be used to store all the reservation information to a json
based configuration file, and enable this feature with REGISTER
command.
Change-Id: Ic93cfc5934a4ad96f11b96ec77bacb877edf6c10
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455909
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Base off restore completion on list population rather than another
counter.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I8f9d8f13aea42e1c350640efd84ff6c247eded0a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457606
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add spdk_mempool_lookup to lookup the memory pool created by the
primary process. This will be utilized in SPDK multi process
application future.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I90505b6566dfc93ef5957ef4c73b1a6438c30742
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459739
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Changed initialization of the ftl lib when using an rpc call to
allow for usage of any default configuration parameters (currently
only allow_open_bands is exposed).
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I73457dfcacc6b1adeffd13ecc6e98001749e00cf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459741
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Compilation Warning on fedora30.
In file included from nvme_ut.c:42:
/home/vagrant/spdk_repo/spdk/test/common/lib/test_env.c:517:17:
warning: The left operand of '>' is a garbage value
if (a1->domain > a2->domain) {
~~~~~~~~~~ ^
This is related to issue #822.
Change-Id: I2b61e821130b89af04db3c475e81d2e91a380a90
Signed-off-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459923
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The semaphore was a part of struct spdk_vhost_session_fn_ctx
so far, but since there's only one pthread waiting on that
semaphore and hence only one event using it, we could just
use a single global sem_t. Same thing with response code
for those callbacks - there's only one needed.
Going a step further, the function complete_session_event()
was removed - it would only operate on global variables now,
and its signature wouldn't make much sense after this
refactor, so it's been inlined.
This serves as cleanup.
Change-Id: I63ef41d7e1564fff5e785de101d887bc1014aad9
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459160
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Enforce spdk_vhost_fini() to be called on the same
thread which called spdk_vhost_init(). We'll also use
the newly added g_vhost_init_thread for other purposes
later on.
Change-Id: I99aebeda2d8ddaf42554aa422c32ed935634595f
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459159
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
With all the pieces in place we can finally remove
the legacy cross thread messages from vhost.
We replace spdk_vhost_allocate_reactor() with
spdk_vhost_get_poll_group(). The returned poll_group
has to be passed to spdk_vhost_session_send_event(),
where it will be assigned to the session. After the
session it started, that poll group will be used for
all the internal vhost cross-thread messaging.
Change-Id: I17f13d3cc6e2b64e4b614c3ceb1eddb31056669b
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452207
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
nvme_tcp_pdu_set_data_buf() has been used to process C2H and H2C for
NVMe/TCP initiator.
In this case, NVMe/TCP cuts out the part of the input data buffer
and transfers the part, and repeats these cut and transfers until
the whole data buffer is transferred. NVMe/TCP uses two SGLs, and
use one to parse from the offset datao to datao + datal and another
to append from the offset 0 to datal.
However, the current nvme_tcp_pdu_set_data_buf() had used
data_length as not data length of this transfer but total length
of the whole transfers by mistake.
Recently DIF library updated to properly handle very similar
cases, and so this patch takes DIF library as a reference and
corrects the implementation.
The next patch will add UT code to verify the bug will be fixed.
The code size is pretty large and so UT code is separated.
Change-Id: Ibeed4de182b8b8740566e874e2757280dc21f9e8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455623
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
This patch is the first patch of the patch series.
The purpose of this patch series is to correct the bug of
nvme_tcp_pdu_set_data_buf() when the multiple iovecs array is
passed, to share nvme_tcp_pdu_set_data_buf() between NVMe/TCP
initiator and target, and utilize nvme_tcp_pdu_set_data_buf()
not only for C2H and H2C but also in-capsule data in NVMe/TCP
target.
This patch is necessary to satisfy the second requirement, to
share nvme_tcp_pdu_set_data_buf() between NVMe/TCP initiator and target
because struct nvme_tcp_req and struct spdk_nvmf_tcp_req are different.
Four variables, iov, iovcnt, data_offset, and data_len are common,
and hence this patch changes the parameters of nvme_tcp_pdu_set_data_buf()
to accept them.
The bug is fixed in the next patch and tested in after the next patch.
Change-Id: Ifabd9a2227b25f4820738656e804d05dc3f874a5
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455622
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Using malloc'ed string for string in iSCSI target has caused
scan-build error.
Define maximum port number of portal to be 32 and use fixed size string
whose size is 33 for spdk_iscsi_portal_grp::port.
This change will reduce the potential malloc failure.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie1fcdbd45ce000a9c1c53761195697555b8d030a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459709
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Using malloc'ed string for string in iSCSI target has caused
scan-build error.
Define maximum IP address of portal to be 256 and use fixed size string
whose size is 257 for spdk_iscsi_portal_grp::host.
This change will reduce the potential malloc failure.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iceeae94e250ea426f72ff72355a213606308da51
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459708
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Using malloc'ed string for string in iSCSI target has caused
scan-build error.
Maximum size of target name is already defined to be MAX_TARGET_NAME,
and hence use fixed size string whose size is MAX_TARGET_NAME + 1 for
spdk_iscsi_tgt_node::name.
Change psdk_iscsi_tgt_node::alias together.
This change will reduce the potential malloc failure.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iac4cd6e9d60173ddeb68ca21ce712126c13bc3c4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459707
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Using malloc'ed string for string in iSCSI target has caused
scan-build error.
Maximum size of initiator address is already defined to be
MAX_INITIATOR_ADDR, and hence use fixed size string whose size
is MAX_INITIATOR_ADDR + 1 for spdk_iscsi_initiator_mask::mask.
This change will reduce the potential malloc failure.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic39e08986c9377800ce58a1cb5b8401c6b71cf96
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459706
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Using malloc'ed string for string in iSCSI target has caused
scan-build error.
Maximum size of initiator name is already defined to be
MAX_INITIATOR_NAME, and hence use fixed size string whose size
is MAX_INITIATOR_NAME + 1 for spdk_iscsi_initiator_name::name.
This will also reduce the potential malloc failure.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic6bc172125fc6c9c0896499704d2a9b522106da0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459705
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Including tgt_node.h in iscsi.h will prevent us from including
iscsi.h in tgt_node.h. Subsequent patches will require tgt_node.h
to refer the macro constants in iscsi.h.
Hence
- remove inclusion of tgt_node.h from iscsi.h,
- add inclusion of spdk/scsi.h to iscsi.h, and
- remove inclusion of spdk/scsi.h from tgt_node.h
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5ac808a83754c157e4140bcd2a83c4d210e30d91
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459704
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Here is the an example to describe existing issue:
There is a Write request with 64KiB data length, and this IO is cross the IO
boundary. We assume that the parent IO will have 2 children requests, one is
33KiB length, the other one is 31KiB. Here is the view of parent iovs, the
first 33KiB length data has 33 iovs:
iov.[0].iov_length = 1024;
.
.
iov.[31].iov_length = 256;
iov.[32].iov_length = 768;
.
.
iov.[64].iov_length = 1024;
In function _spdk_bdev_io_split(), then you can see that for the 33KiB length
child request, exiting code will run out of child child_iov space and return
error due to last one data buffer is not block size aligned.
Here we can rewind the existing offset to last block size aligned buffer to
avoid the error case, for backend which need aligned data buffer such as
AIO backend, the request will go through spdk_bdev_io_get_buf() again to
do the data copy, otherwise for those backend devices such as NVMe with
hardware SGL support, 256 data segment is fine for them.
Change-Id: I96ebdf29829d86f9b38fab28a7406eedc9fa44ef
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453604
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Bdev initialization need to be done after VMD.
Change-Id: Ia680ccbdb8fc6db1d3c09cf9d917105e183a3845
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459768
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
VMD section with Enable flag set to true
need to be defined in config file to
enumerate devices behind VMD.
Change-Id: I0b35d93b224025050ae0c081af720ed816c9f0fa
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459765
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Return immediatly from ftl_reloc_add() if no
new blocks was added to relocation.
Change-Id: If80dfa725e0bb9f3b8987740012858a671c5ad90
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457626
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Added check if band that is added to reloc
have any valid blocks. Return immediately
if there is no valid blocks.
Change-Id: I2bce088e0ad71479c6899fff96845397d12e2e92
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457625
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In case ANM event occurs on band being
relocating (band is on active reloc queue)
we shoudn't add such band to pending queue.
Change-Id: I92a8bee11309097e19afaea549460f1d4387e3e5
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458617
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In case high priority band was added
for relocation it should be removed
from active/pending queue if it was
already on one of them.
Change-Id: Id0591b1d3a4174dd05eb1c32227e4d3b3a9cbcd0
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458057
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
In case ANM event occurs on open band there
can be situation that reloc will try to read
block on which there is ongoing write.
This is happening because lba valid map is
updated before write submission to allow sent
consistent metadata to disk before all user
writes are completed.
Added write offset to the each chunk and
add check to reloc if particular ppa is written
on that chunk.
Change-Id: Ic95a06e69381d2152a86984b65a0975afaff955d
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458056
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In case ANM event occurs on open band
reloc need to be able to process such
event.
If band is not in closed sate do not
alloc lba map for it and do not set
it to free state after relocation.
Change-Id: I2f4a5770fef08271d222936ca19f3cc98e5e5be1
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457612
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Open bands need to have lba map segments
set to cached state to prevent read lba
map from disk during relocation events.
Change-Id: Ib4f1ed19131fad174c1d2f70e4c02e83701e2a0a
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457853
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Band tail PPA should be initialized when
new FTL instance is created.
Change-Id: Ie2fb72aa3f29eece0b6f8912998b33af3ba6b355
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457777
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Send ANM event to core thread for further
processing. This will remove a need of locking
in relocate module when ANM event occur.
Change-Id: I0efb1f1b8c96c107cda5fe78e8ee5672cde39f11
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457611
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In our previous code, we will handle all the PDU until there is
no incoming data from the network if we can continue the loop.
However this is not quite fair when we handling multiple connections
in a polling group.
And this change is setting a maximal NVME/TCP PDU we can handle
for each conneciton, it can improve the performance. After some
tuing, 32 should be a good loop number. Our iSCSI target uses
16.
The following shows some performance data:
Configuration:
1 Command used in the initiator side:
./examples/nvme/perf/perf -r 'trtype:TCP adrfam:IPv4 traddr:192.168.4.11 trsvcid:4420'
-q 128 -o 4096 -w randrw -M 50 -t 10
2 target side, export 4 malloc bdev in a same subsystem
Result:
Before patch:
Starting thread on core 0
========================================================
Latency(us)
Device Information : IOPS MiB/s Average min max
TCP (addr:192.168.4.11 subnqn:nqn.2016-06.io.spdk:cnode1) from core 0: 51554.20 201.38 2483.07 462.31 4158.45
TCP (addr:192.168.4.11 subnqn:nqn.2016-06.io.spdk:cnode1) from core 0: 51533.00 201.30 2484.12 508.06 4464.07
TCP (addr:192.168.4.11 subnqn:nqn.2016-06.io.spdk:cnode1) from core 0: 51630.20 201.68 2479.30 481.19 4120.83
TCP (addr:192.168.4.11 subnqn:nqn.2016-06.io.spdk:cnode1) from core 0: 51700.70 201.96 2475.85 442.61 4018.67
========================================================
Total : 206418.10 806.32 2480.58 442.61 4464.07
After patch:
Starting thread on core 0
========================================================
Latency(us)
Device Information : IOPS MiB/s Average min max
TCP (addr:192.168.4.11 subnqn:nqn.2016-06.io.spdk:cnode1) from core 0: 57445.30 224.40 2228.46 450.03 4231.23
TCP (addr:192.168.4.11 subnqn:nqn.2016-06.io.spdk:cnode1) from core 0: 57529.50 224.72 2225.17 676.07 4251.76
TCP (addr:192.168.4.11 subnqn:nqn.2016-06.io.spdk:cnode1) from core 0: 57524.80 224.71 2225.29 627.08 4193.28
TCP (addr:192.168.4.11 subnqn:nqn.2016-06.io.spdk:cnode1) from core 0: 57476.50 224.52 2227.17 663.14 4205.12
========================================================
Total : 229976.10 898.34 2226.52 450.03 4251.76
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I86b7af1b669169eee2225de2d28c2cc313e7d905
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459572
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
SPDK blobfs has asynchronous APIs defined in blobfs_internal.h file,
as users may want to use them, so we remove them to the public .h file.
Change-Id: I1835d97060101f6315a73cb8638b15ff7e13ba54
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457547
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
I tried experimental binding of SPDK with Mongo-rocks. However,
the binding sometimes invoke blobfs APIs without thread
initializations. In that case, null dereferences occur. In other
words, we need to carefully use blobfs not to invoke any threads
that are not registered to blobfs.
This patch simply adds a sanity check at every use of blobfs APIs.
By doing this, we do not need to care about which threads can use
blobfs APIs.
Change-Id: I5b37b0267306a7c76d20e81c1773a6a33be7828c
Signed-off-by: Takeshi Yoshimura <t.yoshimura8869@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/418966
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
"C2HSuccess" is only valid for TCP transport. So this parameter
should be looked up only for TCP transport. Without the change,
spdk_nvmf_parse_transport() would bailout early for RDMA and
other transports without every creating them.
Signed-off-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Change-Id: I34bdff2f4ab930516743cd5dbf022d75e60fd85c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459571
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In DIF library there are many functions that converts offset or
length from LBA based to extended LBA based.
Factor out them by adding a helper function _to_size_with_md().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id5576edacc8a07095726f659c4b53ac3aa83727d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459530
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This will be used to get extended LBA based range or length in NVMe/TCP
target later.
Change-Id: Id0f08bdaeea634dbc05b34a0f7914be21aef9aae
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458706
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add spdk_dif_update_crc32c_stream to update CRC32C by stream fashion.
spdk_dif_update_crc32c_stream utilizes the updated _dif_update_crc32c_split.
A minor bug was found in UT for spdk_dif_update_crc32c and is fixed
together in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I92358e845e8e2e17c6f288aa718b947e71e6e1fb
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458919
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For NVMe/TCP target, data segments which correspond to H2C or C2H PDU
will have any alignment, and _dif_update_crc32c_split will have to
process partial data block, particularly the following types:
- start and end are both within a data block.
- start is within a data block, and end is at the end of a block
On the other hand, _dif_update_crc32c_split had assumed that passed
block is always a complete block.
This patch exposes offset_in_block, data_len, and guard as parameters
of _dif_update_crc32c_split() and make _dif_verify_split() process
the above two types of data block properly.
The next patch will utilize the updated _dif_update_crc32c_split to
add spdk_dif_update_crc32c_stream().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iee29377ad49d4f209673fffb4de4a23a54f31766
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458918
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: I6c308ee546c28c479ceb903bc1749bf5209dc6fe
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448172
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <uma.willpower@gmail.com>
spdk_dif_generate_stream() and spdk_dif_verify_stream() are very
similar. Factoring out the common part into a function will improve
the maintainability and do in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I16ecd0860c75037d9182298d7513749dfe8e9b56
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458376
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add spdk_dif_verify_stream to verify DIF by stream fashion.
spdk_dif_verify_stream utilizes the updated _dif_verify_split.
spdk_dif_verify_stream is very similar with spdk_dif_generate_stream().
UT code demonstrates how it is realized.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1c5d197cf4c0bbc82c8e7f4fa45ddc0b94051058
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458330
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For NVMe/TCP target, data segments which correspond to H2C or C2H PDU
will have any alignment, and _dif_verify_split will have to process
partial data block, particularly the following types:
- start and end are both within a data block.
- start is within a data block, and end is at the end of a block
On the other hand, _dif_verify_split had assumed that passed block
is always a complete block.
According to the refactoring done in the last patch, this patch
exposes offset_in_block, data_len, and guard as parameters of
_dif_verify_split() and make _dif_verify_split() process the
above two types of data block properly.
The next patch will utilize the updated _dif_verify_split to
add spdk_dif_verify_stream().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic371d3ccefbd5fe8147a948a624013be2702128e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458329
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For NVMe/TCP target, data segments which correspond to H2C or C2H PDU
will have any alignment, and _dif_verify_split will have to process
partial data block, particularly the following types:
- start and end are both within a data block.
- start is within a data block, and end is at the end of a block
On the other hand, _dif_verify_split had assumed that passed block
is always a complete block.
To process the above types, separating guard computation, DIF copy
and skipping metadata field, and DIF verification into three parts
will be helpful and is done in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic4f1765e01507efa812dfaf7a8018666c6346f8e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458328
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Some of the errors were silent, making it hard to pinpoint the exact
failing call. This patch adds SPDK_ERRLOGs for each error path.
Change-Id: I71be6c97cab916ac52314e5f4e4d63358877bd96
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458426
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Send LBA along with the data block when mirroring writes to the
non-volatile cache. The metadata buffer is retrieved from the metadata
pool, so the maximum number of concurrent requests is limited to
nv_cache.max_request_cnt, while the number of blocks in a single request
is limited by nv_cache.max_requets_size.
Change-Id: If260302d16039183fb0fe073ef7419947532cfab
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458093
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Initialize the memory pool for storing metadata (LBAs) when writing data
to the non-volatile cache. The mempool's object count and size can be
configured via nv_cache.max_request_cnt / nv_cache.max_request_size
respectively.
Change-Id: I376df9a75be13d4b29ba475f350edf402c868d48
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458092
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Address translation wasn't correct for >32 bit length packed address.
This commit fixes the issue and adds a corresponding unit test.
This patch fixes issue #774:
https://github.com/spdk/spdk/issues/774
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: Idce67c47f2a9888f9e2ae2eadaf71ccc34e5c260
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457114
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Added spdk_pci_get_first_device() and
spdk_pci_get_next_device() to iterate
over all devices on g_pci_devices list.
Change-Id: I65079fb3e274195707dee64bc1fb8b4b72d07352
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450924
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Put the locks inside cleanup_pci_devices().
This serves as cleanup.
Change-Id: I040b28006e5584d1f33af26b63cafedbafe04fdb
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458934
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
The global pci tailq is no longer modified on the dpdk
thread, so on the spdk thread we can access it safely
without any lock. The code is slightly more readable
then.
This shows that cleanup_pci_devices() is always wrapped
with lock/unlock. We'll put the locks inside this
function in the next patch.
Change-Id: Ia4d386b78a87078761df0a3b953bfc4ff44102f8
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458933
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
To safely access the global pci device list on an spdk
thread, we'll need not to modify this list on any other
thread. When device gets hotplugged on a dpdk thread,
it will be now inserted into a new global tailq that
can be accessed only under g_pci_mutex. Then any
subsequently called public pci function will add it to
the regular device tailq.
Change-Id: I9cb9d6b24fd731641fd764d0da71bedab38824c9
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458932
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
To safely access the global pci device list on an spdk
thread, we'll need not to modify this list on any other
thread. When device gets hotremoved on a dpdk thread,
it will now set a new per-device `removed` flag. Then
any subsequently called public pci function will remove
it from the list.
Change-Id: I0f16237617e0bea75b322ab402407780616424c3
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458931
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
For VMD driver we'll need to introduce some way of
iterating over all spdk pci device objects and we would
like to achieve that with simple spdk_pci_get_first_dev()/get_next_dev()
APIs. To make it thread safe though, we would have to
expose some public pci mutex to be locked around the
iteration and we don't want to do that, so we'll make
PCI APIs usable from only a single thread - this will
prevent any pci devices from being removed inbetween
subsequent get_first/get_next calls.
We currently have the following players accessing pci
device state:
1) public APIs, obviously (on any thread right now)
2) VFIO hotremove callback (dpdk interrupt thread)
3) rte_eal_alarm for detaching rte_pci_devices (dpdk
interrupt thread)
4) DPDK hotplug IPC (dpdk interrupt thread)
There is g_pci_mutex providing the thread safety, but
even today it doesn't protect #3 and #4, making the
entire pci layer prone to data corruption.
To make #3 and #4 safe, we would have to lock inside
device init/fini callbacks (spdk_pci_device_init/fini),
but those are called directly inside the public device
attach/detach functions which already lock.
So now, with the decision to drop thread safety from
public pci APIs, we narrow down the locks inside public
functions and introduce locks inside those lower-level
init/fini callbacks.
Change-Id: I5dcbc9cdcbab65ee76cd3c42890f596069ec9a8a
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458930
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Converting to the struct virtio_req is useless.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I141268314d28cf87bdef529808c8e18bd1b41c9d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459360
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently we are missing cleanup routine for case when
power failure interrupts creating snapshot. This patch
add such routine.
For the case where we find blob with a parent snapshot ID
matching newly created snapshot we can finish whole process
during recovery by processing forward with setting snpashot
as read only, removing xattr and syncing. We should remove
snapshot only if there is no blob with parent pointing at
snapshot.
Fixes github issue #760
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I2f0e298164e07a2b4dfa5367e8878facef640702
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455216
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
By default QAT will be selected if available however a new RPC
can be used to either auto-select (default) or specify either
ISAL or QAT.
Change-Id: I37cf7640bbd8cef455583e1eccb8adb59cc419d8
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456693
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Fixed issue when restoring from a dirty shutdown - sometimes end md
wasn't erased after a band was prepared from writing when a shutdown
happened. This resulted in inconsistency between the new head md and
old tail md, which was technically valid. Band sequence numbers would
then be reused, causing a failure on any subsequent restore.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: Ic3e968be02bb814d6c85f0a3279403fe99337b86
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459287
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Changed to use 4k alignment in dirty shutdown I/Os. Otherwise the
scatter gather lists used in QEMU for underlying file/block device
would use an extra entry (e.g. 17 for 16 sector writes), and eventually
some I/Os would write to offset 0 in underlying file, corrupting head
metadata.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: If8c88ce708529b094a09c8ee952912cc22cd53b9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458090
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Band's lba_map needs to be set to NULL before restore completes, as
it's not allocated on a per band basis and instead uses a pool from
restore struct itself. Without the fix initializing a band for writing
would hit an assert during proper allocation in ftl_band_alloc_lba_map.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: Icff4f54cbe722cb6030b9dfd55726b9b0d6c1e27
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458422
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch makes spdk_dif_set_md_interleave_iovs() and
spdk_dif_generate_stream() process unaligned start of data segment
properly by using ctx->data_offset.
Separating this patch into two may be required but this patch is
small and aggregating into a patch is good to test.
UT code demonstrates how it is realized.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idb5250aba4e12a34102e5ce067d725c685681177
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458142
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
To process unaligned data segment properly when a whole data buffer
is splitted into multiple data segments and each data segment has
any alignment, we have to update only data offset of DIF context
according to the progress.
Hence this patch adds an new API spdk_dif_ctx_set_data_offset().
The API will be used in the next patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I346ab583518b80792ea40d34cf0c8536ecc3d904
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458141
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
There're outstanding requests in spdk_jsonrpc_parse_request which caused by
connection close.
There are methods to call spdk_jsonrpc_server_conn_close, including
spdk_jsonrpc_server_conn_remove and spdk_jsonrpc_server_shutdown,
Some rpc methods call these functions to terminate connections ,that leads to
memory leaks.
Try to free outstanding requests after deciding to terminate a connection.
And do this follwing with close(conn->sockfd).
Fix issue #784, and can resolve other similar memory leaks about this.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Icd287bd0c5670ee8ec32750b999f82b0fa89cf84
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458438
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
By now (5.1 is released), the Linux kernel initiator supports the
success optimization and further, the version that doesn't support
it (5.0) was EOL-ed. As such, lets open it up @ spdk by default.
Doing so provides a notable performance improvement: running perf with
iodepth of 64, randread, two threads and block size of 512 bytes for 60s
("-q 64 -w randread -o 512 -c 0x5000 -t 60") over the VMA socket acceleration
library and null backing store, we got 730K IOPS with the success
optimization vs 550K without it.
IOPS MiB/s Average min max
549274.10 268.20 232.99 93.23 3256354.96
728117.57 355.53 175.76 85.93 14632.16
To allow for interop with older kernel initiators, we added
a config knob under which the success optimization can be
enabled or disabled.
Change-Id: Ia4c79f607f82c3563523ae3e07a67eac95b56dbb
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457644
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
If users set the persist through power loss configuation file,
that means the Namespace has the capability to support ptpl
feature, here we added a ptpl_activated flag to indicate that
the users enable the feature or not. Users can use Set features
or Reservation Register commands to change the value.
Change-Id: Iae3fd44085c5be5bf9574e49efa567e8212dee20
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455906
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Vhost testing crashed from Nightly testing, because a member
access within null pointer of type 'struct ibv_send_wr'.
Change-Id: If8f34f23864883ea73516d2d1fe3b30137c04316
Signed-off-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458913
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When JSON config was used, app layer was calling the
app start callback twice - once from internally-sent
"start_subsystem_init" RPC, and once from the app layer
itself.
In case of JSON configs, the callback from within the
RPC was actually called prematurely, as the real RPC
server was still starting in the background at that
point. We still need to start the app from that RPC in
case of `--wait-for-listen` option, but for JSON configs
it doesn't make sense. Just ignore it now and rely on
json config load completion callback to start the app.
Fixes#816
Change-Id: Ib54d624f3167137216c910b2d947bbd1dc5023b1
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458351
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If reading the JSON config file has failed, we entered
spdk_app_json_config_load_done(-ERRNO) and tried to
close a client connection that was never initiated,
which resulted in NULL dereference.
To fix it, just check if client_conn != NULL before
attempting to close it.
Change-Id: I7340567c45e795f77110c2914e94ba83fa8d1bff
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458350
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Added new VMD subsystem to enumerate
devices behind VMD when event framewrok
is used.
To enable VMD, user need to provide Enable
flag via config file.
Change-Id: I89bfe22b127c00d358dac7336ffb44b0c0f426ea
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458443
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
NVMe/TCP target may split a whole data payload into multiple H2C
or C2H PDUs with any alignment. Hence to insert or strip DIF correctly
to the split H2C or C2H PDUs, we have to bring the interim guard
value of the last partial data block of the current H2C or C2H
PDU to the first partial data block of the next H2C or C2H PDU.
So we add last_guard to struct spdk_dif_ctx and use it in
spdk_dif_generate_stream().
API spdk_dif_generate_stream() is not changed and UT code should
pass without any change.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I12636c5ac7f619483402538faff4339a16c0e6b0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457545
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For NVMe/TCP target, data segments which correspond to H2C or C2H PDU
will have any alignment, and _dif_generate_split will have to process
partial data block, particularly the following types:
- start and end are both within a data block.
- start is within a data block, and end is at the end of a block
According to the refactoring done in the last patch, this patch
exposes offset_in_block, data_len, and guard as parameters of
_dif_generate_split() and make _dif_generate_split() process
the above two types of data block properly.
The next patch will utilize the updated _dif_generate_split in
spdk_dif_generate_stream().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4211e65ead7fc256a40748412c670e46f83b1731
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457544
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For NVMe/TCP target, data segments which correspond to H2C or C2H PDU
will have any alignment, and _dif_generate_split will have to process
partial data data block, particularly the following types:
- start and end are both within a data block.
- start is within a data block, and end is at the end of a block
On the other hand, _dif_generate_split had assumed that passed
block is always a complete block.
To process the above types, separating guard computation, DIF generation,
and DIF copy into three parts will be helpful and is done in this
patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0171d9021837b9a4b425370293cef45dbe7500e8
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458225
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Four variables head_unalign, tail_unalign, num_blocks, and offset_blocks
became unuseful by the last patch. Hence reduce them to buf_len and
buf_offset in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I04fc1e442be6569a96533cdfe36b27fcc78e98d4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457876
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
For NVMe/TCP target, data segments which correspond to H2C or C2H PDU
will have any alignment. spdk_dif_set_md_interleave_iovs() have allowed
reading data to have any alignment but had required data segment to
be a multiple of block size.
In other words, spdk_dif_set_md_interleave_iovs() had required that both
ctx->data_offset and (data_offset + data_len) must be a multiple of the
data block size.
This patch refines the algorithm to remove the latter requirement.
The update implies that spdk_dif_set_md_interleave_iovs support any
data buffer whose size is less than a single data block.
The update doesn't change parameters of spdk_dif_set_md_interleave_iovs
and existing UT should be passed.
This patch adds additional UT code to test these updates.
Change-Id: I88c7d2a80a8d92b54863b6ad1c3a9d2761a6195d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457542
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The subsequent patches will refine spdk_dif_set_md_interleave_iovs
to change the data_len parameter to be the remaining length, and
to remove alignment constraint completely. This patch is a
preparation to subsequent patches.
This patch doesn't change any behavior.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0e9be7e66d313f3ec2bd8c55cce8bb18e4fff892
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457721
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
There is one existing example usage case to describe the issue:
Users(e.g. Vhost-blk target with Windows Guest) call spdk_bdev_readv_blocks()
to submit a 128KiB length data READ request, and the data buffer
provides by vhost isn't aligned, but the backend block device
requires aligned data buffer, so existing function call trace:
spdk_bdev_readv_blocks()-->
spdk_bdev_io_submit()-->
spdk_bdev_io_get_buf()
spdk_bdev_io_get_buf() will allocate buffer from large data
buffer pool for 128KiB length, of course, it will return error
with existing logic.
So here, no matter what the data length is, we can go through
the split process first for both READ and WRITE.
However, there is one scenario that for iSCSI READ request,
the iSCSI layer will not allocate data buffer for the request,
so for this case if the IO boundary is required we should keep
the logic as before.
Change-Id: I67661f5fa4c3c7c561b45c86146759aa3477adbf
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453133
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The completion cb of outstanding_tr may submit new requeset to
the outstanding_tr list of the qpair, it's an endless loop.
We only abort the remaining outstanding trackers.
Fix#819
Change-Id: I342f52f4d1836f8ef620ef9e3add0b1986727282
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457755
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The next patch in this series introduces and RPC that makes the
selection more flexible.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I55617d3c37b51cf9474c358cb92f5218397c0c58
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457157
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
There were some TODO items in here that were incorrect if using
an underlying block device that had a 4K block size. The values
here will set the compress vol LBA size to match that of the
underlying lvol but the backing IO unit size, the min size that
reduce will use to perform backing device IO is set to 4K as
smaller than this makes little sense given chunk size is currently
at 16K.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ic6a9421a25d947ae7d4dce190d6599eec1d4a05a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458703
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Module only supports shareable transforms, also adjusted the number
to what we need, just 2.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ieb77b5f1221878ac7a4be5176ed459d5165f8430
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458698
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
In _spdk_bs_snapshot_origblob_sync_cpl function on error
path we should not close snapshot as it will be closed during
volume closing when bs_dev is being destroyed.
This issue was found in unit test (see next patch in series).
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I51c38d1f1f97b134679251b43109b1265e565a17
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455215
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This bug was found by code inspection. When PDU read restarts
after data segment, iov_offset must be reduced by data length.
However iov_offset had been reduced by buffer length by mistake.
Lack of UT code was the main reason of this bug. Hence add UT
code to test the fix of the bug together in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I74f2f6ae8dca2e78a64bfdef8080c8031dfabb87
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458530
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
If bdev is configured to use separate buffers for metadata transfer,
but it doesn't support the write zeroes command, pass empty zeroed
buffer to make sure the metadata is cleared out as well.
Change-Id: If6f024266067e5764a28a276296f651d31da4792
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457628
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The function spdk_bdev_desc_get_bdev() was added,
but remained unused. Couple places done the exact same thing,
so now they just use it directly.
Change-Id: I018f57b7b4bcfe22ec6a97cf5261b9a257ba93de
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456957
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Allow requests using separate buffer for metadata IO if base bdev
supports it. Copy base bdev's metadata configuration (separate /
interleaved, size, DIF type and location).
Change-Id: I89996f89cad805e696cacf0bba486b4cc1f617e6
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458407
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Starting with this patch it is possible to remove a
snapshot if there is only a one clone created from it.
In such case snapshot can be removed without any data
copying. This is achieved with following steps (case
with only one clone):
1. Open snapshot (Snapshot1) that shall be removed
2. Check if the Snapshot1 has no more than 1 clone (Clone1)
3. Remove Clone1 entry from Snapshot1
4. If the Snapshot1 has a parent snapshot (Snapshot2):
4a. Add Clone1 entry to the Snapshot2 clones list
4b. Remove Snapshot1 entry from Snapshot2 clones list
5. Open Clone1 blob
6. Freeze I/O operations on Clone1
7. Temporarily override md_ro flag for Snapshot1 and Clone1
for MD modification
8. Merge Snapshot1 and Clone1 clusters maps into Clone1
clusters map
9a. If Snapshot2 is present switch parent ID and backing
bs_dev on Clone1
9b. If Snapshot2 is not present set parent ID to
SPDK_BLOBID_INVALID and backing bs_dev to zeroes_dev
10. Sync MD on Clone1
11. Sync MD on Snapshot1
12. Restore MD flags for Clone1 and Snapshot1
13. Unfreeze I/O on Clone1
14. Close Clone1 blob
15. Remove Snapshot1
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I800724b981af894e01e1912d0077c5b34a2ae634
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445576
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Adds fields to structure spdk_nvme_io_qpair_opts.
These fields allow specifying the locations of memory buffers used
for the submission and/or completion queues.
By default, vaddr is set to NULL meaning SPDK will allocate the memory to be used.
If vaddr is NULL then paddr must be set to 0.
If vaddr is non-NULL, and paddr is zero, SPDK derives the physical
address for the NVMe device, in this case the memory must be registered.
If a paddr value is non-zero, SPDK uses the vaddr and paddr as passed.
SPDK assumes that the memory passed is both virtually and physically
contiguous.
If these fields are used, SPDK will NOT impose any restriction
on the number of elements in the queues.
The buffer sizes are in number of bytes, and are used to confirm
that the buffers are large enough to contain the appropriate queue.
These fields are only used by PCIe attached NVMe devices. They
are presently ignored for other transports.
Signed-off-by: James Bergsten <jamesx.bergsten@intel.com>
Change-Id: Ibfab3939eefe48109335f43a1167082dd4865e7c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454074
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
SQSIZE parameter validation in Connect command was broken because QID
field in qpair was used before intialization.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I8a0b359937d661df3b9888e6084e7d0b4a9056ea
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455667
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch changes the meaning of the data_len parameter of
spdk_dif_set_md_interleave_iovs from `Expected data length of the payload`
to `Expected length of the newly read data in the extended LBA payload`.
This change will align the parameters of spdk_dif_set_md_intereleave_iovs
to of spdk_dif_generate_stream.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7f9c45e78be977625713acb79d2ae82d4375f419
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457543
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
As same as spdk_dif_set_md_interleave_iovs, no noticeable performance
difference was observed even if dif_generate_stream and
dif_generate_stream_split are merged into the latter.
spdk_dif_generate_stream will be updated in subsequent patches anyway.
Hence merge them into dif_generate_stream_split.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I77b588527bc7533dc38a36e450972758ce57d6bb
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457760
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Even if the code for single iovec case is removed, no performance
difference was observed when inserting/striping DIF for iSCSI target.
And the subsequent patches will add more complex operation and hence
simplifying the code before them will be valuable.
So this patch merges dif_set_md_interleave_iovs and
dif_set_md_interleave_iovs_split into the latter.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I784b9e04f0983ed91c7aa66bbc7ceaed4406e3ac
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457758
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
When setting the offset into pmem for the chunk mamps, the wrong
value was used for the length of the logical map resulting in
map corruption after extended fio run.
Fixes issue #813
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Icb51cf8f38a04f05f69595ebd510ced7f1b608f3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457818
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Prints key info about a volume and its PMEM. As the metadata is
mapped, there's no real reason to dump all this to a file, it
can be accessed via gdb using the addresses printed out.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I2c7b8c32b6142ba0fded623a660b4d7d0c5b19bc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458117
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reported by clang:
rte_vhost_compat.c:114:36: error: taking address
of packed member 'payload' of class or structure
'vhost_user_msg' may result in an unaligned
pointer value.
To fix it, just remove the extra unaligned pointer
and inline all its accesses.
Change-Id: I7e4ab536b87ab02a4ea12c55d55a6e495c3091ca
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457559
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In several error cases, the status_class and status_detail
is not properly set.
Change-Id: Ie9cf8ec13b971d7295862872e8c7e834d08e7f14
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457932
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We shoud not always return SPDK_ISCSI_CONNECTION_FATAL
in spdk_iscsi_read_pdu function.
Reason: In iscsi_conn_handle_incoming_pdus, the loop
directly return only rc==SPDK_ISCSI_CONNECTION_FATAL.
But it masks all the necessary information. So we would like
to keep some information of the return value for spdk_iscsi_read_pdu,
and we can use error log to track those information.
Then we can return SPDK_ISCSI_CONNECTION_FATAL as the error
return value for iscsi_conn_handle_incoming_pdus function.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I4c40fcb27052b55cb92e06273701a881def18e12
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457078
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
NVMe bdev module support separate metadata now but NVMf subsystem
cannot process bdev with separate metadata yet.
Hence reject any bdev with separate metadata to be attached
explicitly by this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I793c6c5f61deb766d7bf427ff67ccc57a48974cf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457167
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
_spdk_bdev_io_split() will be used to requests that have IO buffers.
Change-Id: I5ba0b83e47b84066e6c5032de2e02404155896d3
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457549
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
struct ether_addr was renamed to struct rte_ether_addr
in latest DPDK master, but our internal fork of rte_vhost
still used the old name, which can be now a non-defined type.
Together with the struct, the RTE_ETHER_ADDR_LEN define
was renamed as well, so we'll now check if it's defined and
we'll manually define struct ether_addr to keep the old
rte_vhost working.
Change-Id: I78b8104ed3bfe03397881a94f0f8bee14f9efae8
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457609
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For reservation feature in NVMoF, we can't support the persist through
power loss feature, now we will add the configuration file parameter
with Namespace, after users set the configuration file parameter with
one NS, then the PTPL feature can be enabled.
Change-Id: Id72699093f7e68318b9529f7bacc5c9804f7f86b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455905
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch uses the change by the last patch to initialize DIF
context in SCSI layer. Besides this patch changes the name of a
parameter from offset to data_offset to clarify the meaning.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I54bf1168ec5959432aa15dae0360c0640138b033
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457541
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Data offset are intended to correspond to DATAO in NVMe/TCP and
Buffer Offset in iSCSI.
Previously for iSCSI, buffer offset had been merged to start block
address, but passing buffer offset separately from start block address
clarifies the logic more.
On the other hand, for NVMe/TCP, passing DATAO separately from start
block address will be critically important because DATAO will bave any
alignment and will be necessary to use for not only reference tag
but also guard computation.
This patch adds data_offset to struct spdk_dif_ctx and adds it to the
parameters of spdk_dif_ctx_init(). ref_tag_offset is also added to struct
spdk_dif_ctx and it is computed by dividing data_offset by data_block_size
and is used to compute reference tag.
The next patch will use this change when getting DIF context in SCSI.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id0e12ca9b1dc75d0589787520feb0c2ee0f844a5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457540
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In lib/ftl PAGE_SIZE is used in many places. But I think there's no relation with
the host memory PAGE_SIZE.
In most changes, PAGE_SIZE is replaced by FTL_BLOCK_SIZE for ftl block size.
In ftl/ftl-anm.c, PAGE_SIZE is replaced by 4096 for alignment.
Change-Id: I72e7c65c83b9fe1a4e50944dc5d90b9459b4e593
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455347
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Unsetting this flag will decrease the number of WRs retrieved during CQ polling and will decrease
the oeverall processing time. Since RDMA_WRITE operations are always paired with RDMA_SEND (response),
it is possible to track the number of outstanding WRs relying on the completed response WR.
Completed WRs of type RDMA_WR_TYPE_DATA are now always RDMA_READ operations.
The patch shows %2 better peformance for read operations on x86 machine. The performance was measured using perf with the following parameters:
-q 16 -o 4096 -w read -t 300 -c 2
with nvme null device, each measurement was done 4 times
avg IOPS (with patch): 865861.71
avg IOPS (master): 847958.77
avg latency (with patch): 18.46 [us]
avg latency (master): 18.85 [us]
Change-Id: Ifd3329fbd0e45dd5f27213b36b9444308660fc8b
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Evgenii Kochetov <evgeniik@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456469
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Vhost-scsi target will not set task's initiator port parameter,
so reservation commands sent from Guest will cause segment fault.
Change-Id: Ifc175effded5371eca08d5bfe7e4aa977dd4b1c6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457550
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Added basic configuration details (transport type and address,
parallel units, cache info) as well as most important OCSSD geometry
data to get_bdevs driver_specific section.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I00c50706bd9203bcef1701be1b7d87e93c10e57f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456790
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Read requested range of lba map during relocation
instead whole lba map.
To read partial lba map range single move now has
three states: read, read_lba_map and write.
Free queue and write queue were merged to a single
move queue.
Change-Id: I86839f2286d42d4debf87cea40091370e5283b15
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454747
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Keep track of read lba map segments to avoid
unnecessary traffic in case ANM events.
Lba map is divided on 4KB segments which can
store 512 lba entries.
In case multipe read request on same segment
keep pending request list and process it in
read_lba_map() completion callback.
Change-Id: I2661bdb716ab7c975140e0b37aebcb17aa23901d
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453371
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
spdk_vmd_init() will attach all VMD devices that were
unbinded from system. There is not need to specify VMD
bdf in VMD public interface since it can be controlled
by setup.sh script.
Change-Id: Ifc45c32dc7e11b59429a41ddfdd596db30e27731
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456631
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
For the nvme device, I/Os are completed asynchronously. So we
need to check the outstanding I/Os before putting IO channel
when we hot remove the device. We should be sure that all the
I/Os have been completed when we change the sgroup->state to
PAUSED, so that we can update the subsystem.
Fix#615#755
Change-Id: I0f727a7bd0734fa9be1193e1f574892ab3e68b55
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452038
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
rte_vhost_vring_call() from upstream DPDK can read some
unitialized memory and crash if it's called on invalid
queue ids. The implementation in our internal rte_vhost
fork ends up wiritng to a random descriptor number, which
doesn't cause any crashes but is a bug nevertheless.
To fix it, just check if the queue is initialized before
interrupting it during the session start. It's not a hot
I/O path and there's no performance impact.
Change-Id: I830c1be98ef00d4ece9a6bd88cf79b9dfe29d2a9
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457247
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We had "./configure --with-uring" , but actually, it wasn't compiled.
we need add uring to Makefile that code will add this.
then we can continue to verify this module.
Change-Id: I8b98825f6795eb9f9e7b4947d1c7c3a44a6f0f64
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457081
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Previously the connection was scheduled to another core just
after setting conn->full_feature to 1, but conn->state was still
ISCSI_CONN_STATE_INVALID. The connection started to run on another
core but could not run normally until conn->state became
ISCSI_CONN_STATE_RUNNING. conn->state was changed late to
ISCSI_CONN_STATE_RUNNING after sending the first login reponse.
This gap window had caused intermittent critical failures.
Based on this analysis, this patch changes to call
spdk_iscsi_conn_schedule() just after sending the final login response.
Whether any login response is final or not can be known by checking
conn->full_feature is not zero.
Fixes#785
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8ea55fef27e2f332fcd789d32daf479a24c0588d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457414
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Actually write/writev/write_zeroes/unmap are never be called, and we add
the error code here to keep it same style with snapshot bs_bdev.
Change-Id: I32ad051c1902bd7080b894e36f7c89f1c8d27434
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456924
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Gives the ability to change behavior of restore after dirty shutdown
without recompiling ftl library. User can define if partial recovery
or error should be returned after such a scenario.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I6dda40df7b92d6a377957e4a70a3eab91a6ac4a9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456185
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
If a band wasn't closed during shutdown (ie. after dirty shutdown),
the start md contains valid data, however end md does not (or it may
not be written at all).
The config gives the user the ability to specify if encountering
this case should result in an error, or if ftl should pad the band
with data and recover from closed bands only.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: If02f7ca8bc90bb61698fb710fee2274af6af01e4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455513
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If an open band is found during recovery (after dirty shutdown)
ftl will attempt to pad it, instead of returning a recovery error.
Any previously written data on that band is lost, as the line is
treated as being in free state after the pad.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: Ie48fa9fa37a3853f41921b9417c69301cf47e673
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455512
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The patch also changes, so the command calculates the needed
chunk offset based on PPA, instead of relying on the user to
provide one.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: Ic4eec1b86ded4eb71de860015403294ed0c8c266
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455973
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Direct wptr allows for writing to band with externally
provided PPA, rather than one assigned by the wptr. This
can be useful when padding open bands during recovery or
bdev creation, as ftl can find partially written end meta
with no way to close the band with valid data, that would
conform to an already written CRC value.
This does mean that I/O sender is responsible for calculating
and obeying per-chunk write pointer arithmetics.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: Ifcbc4e8ffb69c829469a571bed8e27b148d7a651
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455511
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Almost all I/O callbacks in ftl utilize data in ftl_io, which is
initialized as callback argument in ftl_io_init_internal. This patch
changes the behavior to always returning the ftl_io struct in addition
to an extra opaque buffer.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I611ab1b33575f599798a2bb65c231a724c852c7f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455831
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Improve handling of partial IOs for case when iovcnt == 1.
This case is pretty frqeuent because all data allocated by OCF
have iovcnt == 1 (see ctx->data->alloc() or vbdev_ocf_ctx_data_alloc())
Change-Id: I8d38ca9e9d2bd3e6ce298bf788ce6ed782b56594
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456202
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch fixes submission of partial IOs in bottom adapter
Existing check (if offset > 0) was not sufficient to detect partial IOs
because there could be an IO with offset = 0 but length < total size of iovs.
This patch changes the check, but also free operation on completion
because now the old free does not cover all situations when we allocate iovs.
`Partial IOs` are the IOs handled by bottom adapter
which specify only part of the internal iovs vector.
So their length is less that the length of internal iovs vector.
They exist because sometimes parts of single IO from top adapter
need to be sent to different locations.
Also, in general, IOs initiated by OCF (such as cleaner IOs) are represented
as single big iov that is submitted by parts in form of 'Partial IOs'.
Change-Id: I8ae47659fb34904c593a696d74d683a418ac9962
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455821
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Implement metadata probe functionality to load cache state
from disk.
During metadata probe, we inspect UUIDs of core devices
and create vbdev configurations based on them.
Then, to start vbdev, we use load path (loadq = true).
After this change persistent metadata is officially supported,
we can save and restore cache state from persistant storage.
WriteBack mode is now safe to use in respect to unexpected shutdowns,
because all information about dirty data is also restored during cache load.
Change-Id: I6cf86aabd68177b88638a68ea6a5b78a1068a4d0
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455417
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch updates submodule and appropriate functions.
Cleaner poller is now registered only when needed.
Change-Id: Ic4ca7ce6f77b71ac12c19462f62ae7cd96c59006
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455408
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
using data_offset and data_len is consistent with related APIs,
and is done in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic9d216e25880f7b5ab33b764f45d332c090fa88c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456291
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
In some test cases, unknown iSCSI PDU other than the login request
has been sent to the iSCSI target when the iSCSI target is not in
runnable state, and it has caused failure in iSCSI target.
To know what PDU was received by the iSCSI target, this patch changes
the iSCSI taget to collect dump of the PDU.
SPDK has already the SPDK_LOGDUMP macro but the SPDK_ERRLOGDUMP macro
will be appropriate in this use case and added. Then the SPDK_ERRLOGDUMP
is used in iSCSI library.
We can decode PDU and output any format easy to read by human, but
creating good format is not easy task and error prone. So this patch
uses simple dump.
Dump outputs like:
PDU
00000000 40 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 @...............
00000010 0b 06 00 10 ff ff ff ff 00 00 00 5a 00 00 00 03 ...........Z....
00000020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3ed2fca7fec24ccff17b89ba749a58c397b72c13
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456952
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
AIO backend requires aligned data buffers, and the maximum
IOVs supported in bdev module is defined to 32, there are
cases for Windows Guest which will send data segments more
than 32, SPDK can't process such cases, so here we can set
the 'seg_max' parameter based on bdev module capability.
Also set the maximum segment size for those requests.
Fix issue #625.
Change-Id: I0ff61e55872af17115c0b6b28425e70cb8769790
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452378
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
iSCSI application may set the data iovec to NULL for READ requests.
Change-Id: Ic6b73f62f75dc2d927c18219fa1c2cb242f0528e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457079
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Keep lba map related fields in separate struct directly
in the band. Cleanup interfaces depended on ftl_md.
Lba map structure will be extended in next commit.
Change-Id: I1cfc2f2ff0c0e90bb63f39808780845673002e70
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453370
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
As the name suggests, this function iterates through all elements of the
mempool invoking a callback function on each one. It's particularly
useful when deinitializing mempool that requires freeing resources tied
to each element (e.g. allocated through spdk_mempool_create_ctor).
Change-Id: I3da1fee527a36bf99f0b0e2dd3d6f9297422ff25
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455971
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Split the IO in case io->iov_cnt exceeds the FTL_IO_MAX_IOVEC. It allows
the user to pass any number of iovecs. Each IO request is now split if
necessary and submitted via ftl_io_call_foreach_child submitting each
child individually. Any resubmissions need to be handled on a child
level, as parent request doesn't track its children submission status.
Change-Id: If54249d54225b34191216a366c227f79215abc90
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455527
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
As the name suggests, the function calls a function passed as the
argument for all children IOs.
Change-Id: Idd7b6013e68fdd188db6e682bb9ba9ec2e6f52f1
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455526
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Extended ftl_band_read_lba_map() interface to provide
range of lba map to read.
Added ftl_xfer_offset_from_ppa() function for
calculating offset of read portion of lba map
based on ppa address from IO. This offset is
used for coping read lba map portion to internal
ftl buffer.
Change-Id: I1c72a18c79eda8c33cd0b20ea36a5d9521a09d06
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449435
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
SPDK_SUCCESS is a remnant and all other SPDK libraries have used
just 0. So this patch removes SPDK_SUCCESS from iSCSI library and
uses 0 instead.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie33fd26238411e994ea9ea0c898da1abb502cad6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456928
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch uses the newly added API spdk_dif_update_crc32c() when
DIF insert/strip is enabled.
Change-Id: Icf32a0ddef6cf92b0887b38495457e7fcac30987
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456172
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
iscsi_sgl_append_with_md had not increment _iscsi_sgl::iov
by appended count of iovecs. Hence if data digest is enabled,
data segment will be overwritten by data digest.
This patch fixes the bug.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibcdacb883b2b97ad86cfc39a035c76264090401d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456451
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Data digest computation should take extended LBA payload but
could not do yet.
This patch adds an new API spdk_dif_update_crc32c() to compute
CRC-32C value for extended LBA payload.
In the next patch, spdk_dif_update_crc32c will be used in iSCSI
target first.
Change-Id: I327f384bb7dfd8b68279b0acec0ee78a40264a26
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456171
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
DIF context had been got for every read of data segment but
DIF context is not changed and so getting DIF context once
when allocating data buffer is enough and is done in this
patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0f386ab594a0d9076fa0206d5fc240f5c790181d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456772
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
The only caller iscsi_conn_handle_incoming_pdus accesses the returned
pdu only when the return code is 1. So we can remove update of
_pdu for other cases in spdk_iscsi_read_pdu.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I54b9f050c3b45c87f4797a90d7606638d6c821ad
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456771
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Instead of just return "-1", the proper error detail will be
returned and reported out.
Change-Id: Ief900494081ddc9ae6329ee7a56723d9cb5efe13
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456937
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
According to the TP 8000 spec in Page 26:
Maximum Number of Outstanding R2T (MAXR2T): Specifies the maximum
number of outstanding R2T PDUs for a command at any point in time
on the connection.
This patch makes the current host driver implementation support one r2t.
We cleanup the code to do the right advertising to the target in the
icreq and avoid attempts to deal with multiple rt2s.
Reported-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: If06ad2e8bde31c2fd7e1c3739f651fb64040e3a9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455750
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Or Gerlitz <gerlitz.or@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In prep for full QAT compression support later in this patch
series. dpdkbuild/Makefile slightly refactored for readability,
x86 crypto check removed as it pre-dated checks we now have in
configure.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Iaaaf51b9eb5e18840f47d2d4f431c5a6e8c420ee
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456408
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If the qualified core wasn't found, then we should compare
spdk_env_get_core_count() with i, instead of lcore.
Signed-off-by: Li Feng <fengli@smartx.com>
Change-Id: Ie92f56712b7f0e51636008fe12fff5584b6be8ab
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456415
Reviewed-by: wuzhouhui <wuzhouhui14@mails.ucas.ac.cn>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
According to https://tools.ietf.org/html/rfc3720#page-196,
Error detail of "Authorization failure" is for the case that
the initiator is not allowed to the given target.
Change-Id: Ie628c4c857e965aa6694399a9832ce0501e50745
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456826
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
According to the TP 8000 spec in Page 26:
Maximum Number of Outstanding R2T (MAXR2T): Specifies the maximum
number of outstanding R2T PDUs for a command at any point in time
on the connection.
Note that by the spec, the target may only support single r2t
(which is the minimum possible), it doesn't have to use multiple r2ts
even if the initiator supports that. So remove the maxr2t and
pending_r2t variable in the tcp qpair structure.
In the original design, we think that maxr2t is the maximal active
r2t numbers for each connection. So if the initiator sends out maxr2t=16,
it means that all the commands of a qpair can use such number of R2T pdus.
So we need to wait for the available R2Ts for the request when the maxr2t
reaches the maximal value. But it is the wrong understanding of the spec.
In fact, each command has its own number of maximal r2t numbers, then we
do not need to use the wait method for R2T method anymore. So we remove
the state TCP_REQUEST_STATE_DATA_PENDING_FOR_R2T. Futhermore, we adjust
the related SPDK_TPOINT_ID definition.
In current patch, the target will support one active R2T for each
write NVMe command. Thus, we remove the function spdk_nvmf_tcp_handle_queued_r2t_req.
Reported-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I7547b8facbc39139b4584637ccc51ba8b33ca285
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455763
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Or Gerlitz <gerlitz.or@gmail.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The current nvme_tcp_qpair_disconnect behaviour
is not exactly correct, we do not re-initialize
the state of some data structures of the tqpair.
And this caused the coredump.
Purpose: Fixes#808.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I4d2cad8fc0712dbebfc2f3e52373cbe3b9908bf7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456755
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
MAX_VMD_TARGET defines size of array that need to be passed
to spdk_vmd_pci_device_list()
Change-Id: Ib2a33fe50072036e6a8f1709ac4e3ee82c1bb3f1
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456480
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The memory API has been refactored. It is not possible anymore to
register a memory region more than once. This has been introduced in
this patch: https://review.gerrithub.io/426085
In case of vhost with vvu transport, it often happens that two
consequtive vhost memory regions are mapped to virtual addresses that
lie within the same 2MB address range. This means that the vhost memory
regions may not be 2MB-aligned in the process virtual address space. As
a result, the `FLOOR_2MB()` of those addresses gives the same address.
Thus, we end up trying to register the same 2MB memory range twice.
This issue does not appear in case of AF_UNIX transport. Vhost memory
regions in case of AF_UNIX transport are hugepage backed. Therefore, the
mmapped virtual addresses of those memory regions are always
2MB-aligned. On the contrary, in case of vvu transport, the vhost memory
regions are segments of the PCI memory address space of the
virtio-vhost-user PCI device. This MMIO space is mapped in its entirety
by the DPDK vfio interface along with the other PCI BARs. Ultimately,
the vhost memory regions correspond to offsets in this mmapped PCI
memory region and thus there is no warranty that the mmapped virtual
addresses are 2MB-aligned.
This issue is fixed by skipping the already-registered 2MB memory
regions.
Change-Id: I62c9c257e6f172c894cd3454d2cbeee1986e6189
Signed-off-by: Nikos Dragazis <ndragazis@arrikto.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/441057
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Some existing NULL ptr checks was never hit so
there should be removed.
Change-Id: I80f4e1f063564f2a6915d0a1c548bcf22c4b3075
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456477
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Removed all printf() usages and replaced it with
SPDK log macros.
Change-Id: Ibe536a9bb696ebf3ad7dd1f402b050eca0dfd375
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456476
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Added assertion checking if next element on list
is valid.
Change-Id: I9f4d969dc84e5fbee9d72d764f57fbd9480ab197
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456774
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
spdk_iscsi_read_pdu has been used only in a place,
iscsi_conn_handle_incoming_pdus. iscsi_conn_handle_incoming_pdus
classifies return code of spdk_iscsi_read_pdu to
SPDK_ISCSI_CONNECTION_FATAL, 0, or 1.
Using 0 instead of SPDK_SUCCESS in spdk_iscsi_read_pdu matches
iscsi_conn_handle_incoming_pdus and is done in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I231c2e70a094c26af2c8eb60d77b92d880674901
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456770
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
DPDK rte_ring_enqueue_bulk() has free_space parameter to return
the amount of space in the ring after enqueue operation has finished.
This parameter can be used to wait when the ring is almost full and
wake up when there is enough space available in the ring.
Hence we add free_space to spdk_ring_enqueue() and spdk_ring_enqueue()
passes it to rte_ring_enqueue_bulk() simply.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9b9d6a5a097cf6dc4b97dfda7442f2c4b0aed4d3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The length should be no larger than the remaining_size.
For example, The remaining_size(firstly, assigned by payload_size) is 128KB,
and user's sgl length is 1MB. Since we already split the I/O, so we should
not use the original length(1MB), but use the remaining_size.
Fix issue reported by: https://github.com/spdk/spdk/issues/808
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I0a7d0f2282c8ad0e253d8de7091b6c5b87018e9a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456760
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously, if the return value of nvme_tcp_qpair_process_send_queue
is not zero, we directly return but not continue receiving the pdu.
But this is wrong, we should only handle the case when the
return value is negative.
Reported-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I83453733f5a3e3350a0461b4cb0bc409fde32fea
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455899
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Stumbled on this one trying to fix new scan-build errors for clang 8 on
fedora 30. scan-build fails because there are paths where this can
result in a null pointer access.
Change-Id: I408376e7eab79ab6d99c35cc662f5737e3518e71
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456671
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added a utility function for the cleanup related operations.
Change-Id: I4e49dd9c2da899a5bda289bc36778b636af9c5df
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456599
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The function spdk_bdev_io_get_io_channel() was added,
but remained unused. Couple places done the exact same thing,
so now they just use it directly.
Change-Id: Ifa332ce3a489256ccf2f5d0dd9c74a3215c544ce
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456435
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The function spdk_bdev_io_get_thread() was added,
but remained unused. Couple places done the exact same thing,
so now they just use it directly.
Change-Id: Ia25abf57eb88c8df47c83e4edd761a9e02cc1618
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456436
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The metadata buffer was allocated in multiples of blocks (as well as
aligned to a block). It's not necessary and is a waste of space.
Change-Id: Icb13c664e82b23ea09bec16fa3c18fa98b722d57
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455922
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The current location of the metadata pointer should be calculated based
on the metadata size, not block size.
Change-Id: I90177557cf4e194cd77adfbfe1c5a6e0e6df7967
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455921
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We will need to put the recently completed nvme_request
object on the qpair's STAILQ. We don't reference any
real data from the nvme_request in the completion path
since we've already stashed the cb_fn and cb_arg in
the nvme_tracker. But we will need to reference the
STAILQ_ENTRY to put it back in the qpair's STAILQ, so
prefetch that cacheline.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id76122afe4150c84a61fbe38bc874f10d606b3b3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456673
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There's no need to set this every time we allocate
a request.
While here, fix a typo near where we needed to modify
the unit test to remove the qpair assertion.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8af41a6c483415950f625d1ed2ef46088b75a622
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456270
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Handle IOs with metadata being transferred in a separate buffer if the
device underneath supports it.
Change-Id: I38887a24d2aad51f674a840367b5dcdeda2d5a8b
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451467
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch adds *_with_md family of functions allowing for IO with
metadata being transferred in a separate buffer.
Change-Id: I842d5a00a532cf5d0b0f0738535ea46903674140
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451465
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There is no need to keep this functionality in separate
files.
Change-Id: Ie998324cbcfcdc384f912fe36124b082774c0dc8
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456475
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
vring notification mechanism is transport-specific. At present, vhost
dataplane code in `lib/vhost/vhost.c` triggers guest notifications with
`eventfd_write()` system call. But this is an AF_UNIX specific
notification mechanism. This patch replaces `eventfd_write()` with the
existing generic `rte_vhost_vring_call()` function that is part of
DPDK's librte_vhost public API.
`rte_vhost_vring_call()` takes a vring_idx as an argument to associate
the `struct spdk_vhost_virtqueue` instance with the relevant `struct
vhost_virtqueue` instance. We introduce a new `vring_idx` field in
`struct spdk_vhost_virtqueue` to enable this association. This field is
initialized in `start_device()`. In addition, a stub for
`rte_vhost_vring_call()` is added in the vhost unit test file.
SPDK's internal `rte_vhost` copy will not be updated in order to support
the virtio-vhost-user transport. However, an `rte_vhost_vring_call()`
function is introduced in SPDK's `rte_vhost` in order to have a solid
API. This function is just a wrapper of `eventfd_write()`.
Change-Id: Ic93e25cd3f06e92f04766521bc850f1ee80b8ec8
Signed-off-by: Nikos Dragazis <ndragazis@arrikto.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454373
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Request may be submitted several times via nvme_qpair_submit_request
function, such as request in queued_req queue being re-submitted.
With enabling timeout feature, nvme_qpair_submit_request compares
request->submit_tick to zero to check if this is the first submission
for this request. If true, record submit_tick for this reuqest.
So request->submit_tick needs to be set zero in allocation.
Change-Id: Ie3f420aa337802c5ad3962c3fdcd680dec1ccdcb
Signed-off-by: lorneli <lorneli@163.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456328
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This assert is not needed anymore.
Change-Id: I7bc85c980c2e120b105b35763b9bea5960564acc
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456590
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Keep an array of iovecs tied to each IO. Internal IOs can have
iov_cnt > 1 without having to allocate additional memory. User's iovec
can now be modified too (e.g. when splitting the request).
Change-Id: Iec73c6dad59acdc331a1461fd7feac085138a8de
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455525
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Replaced single IO pointer with a queue. This allows multiple requests
to be queued when the writes cannot be scheduled.
Change-Id: I0cde50e7378108a6aab4ef6fe601cb854244f5d5
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455524
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
On the user IO path, the flow always follows the same procedure:
allocate ftl_io and initialize it using ftl_io_user_init. There's no
point in separating these two actions.
Change-Id: I578347ccc7c85e5945368dd6bf76c58985af3939
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455523
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There's no point in synchronously returning an error from ftl_io_write
/ ftl_io_read as they're also reported in the IO's completion callback.
All errors are now reported through io->status.
Change-Id: I4adf4e13221b63715625276042e1172cd63b8f9b
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455521
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Select the method of choosing next PPA to read inside ftl_submit_read,
as it can be deduced from other arguments.
Change-Id: I6cbd37c2c6d7f073bf735491b4960d72e327c4e6
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455520
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Some of the internal IOs split the contiguous data buffer into multiple
iovecs to separate the requests. It's unnecessary and can be replaced
by checking the position within the data buffer.
Change-Id: I9255ea0072fee6c4e6a7dca21e4008780bc45610
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455519
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Advance parent's IO position when children positions are advanced.
There's no need to call ftl_io_advance twice for the same request
anymore.
Change-Id: I1f7f04a3a83575b11e7bf0b13c0c8f3bf98b5522
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455518
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This is a small optimization.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib593908d3aeb17aac55be06b8e3be42e28a23061
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456268
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Existing code in spdk_bdev_write_zeroes_blocks() will call spdk_bdev_free_io()
for the error case, which will cause assertion because the bdev_io isn't
submitted to the backend yet, so we will check the condtion first to
avoid the error case.
Change-Id: If27d78217f709a3315e74c00869d345abd6b9a69
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453491
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We were printing out the wrong value here.
Change-Id: I7b5f4eaca41317a69167ad5413a1b1913e9c0842
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456278
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This module simply sits on another virtual bdev
and adds a simulated average and p99 latency to that drive.
Change-Id: Ie9fc91e27585fd0636cb7dc845cb41744bf24625
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453594
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Using AVX512 or AVX2 ends up being a small pessimization.
I think AVX works better for copies when there are
multiple cachelines to copy. I see a 2-3% improvement
in high IOPs benchmarks when reverting to SSE.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3d70a1e359e98cec2a9da41ccf9af2de9baa5868
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456247
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Profiling showed these weren't getting inlined - so add
the inline keyword to make sure it happens. This helps
improve performance a bit.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia86edccc9163258efdcddcce6989a71fb180caf6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456099
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
At 10M IO/s, we see a lot of CPU cycles wasted getting
the next tracker into cache. If we only get one
completion at a time, this is unavoidable, but when
there are multiple completions pending, we can prefetch
the second tracker while processing the completion for
the first.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9de702bee3719e4494eec6f05b09be3672f1e0ac
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456097
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Prior merge contained all of the code EXCEPT for the user-callable function.
Signed-off-by: James Bergsten <jamesx.bergsten@intel.com>
Change-Id: I1cb7105ab85ffae8ed4f600261fed86c9c778893
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456282
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
All the SCSI commands have two states: allowed and conflict,
based on different reservation types and I_T nexus, the SCSI
module will check each commands before sending to the backend
device.
Change-Id: Ib05cece1c237873360f85c68d139362200d2d47e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436097
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Purpose: Make the variable definition consistent
with the same variable in the target side.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ibc4ff92b6346f0a1ad803dcb79d041289f5648b2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455807
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
QAT driver will not load with anything less than 128, may need to
adjust after performance testing.
Change-Id: I4949e6d97e7ed997d14b907dac00cc288dcc331b
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456069
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
mbufs are freed with a single call to the first mbuf in the chain
unless we hit an error before we chain them. So free them correctly
when chained and loop through the array one at a time and free them
that way if not.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I80ebb86bc2147b42db89d24f8e985cacf7d4bceb
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455019
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We need to move sub_reads++ statement earlier. Otherwise if
the read fails, the sem_wait(&channel->sem) call number
is not correct.
Change-Id: I05281a74bef78e4f80ce8d202b47849d1e6c2009
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453788
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Orden Smith <orden.e.smith@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Change-Id: I4a3c4d1ca8d0b18201edf99a67a3d75ca7ab8153
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449499
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The purpose of is patch is to track whether there is
req allocation failure for those file metadata related
operation in order to find the bug.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I171a5b7fca214675fb1356ca650a01eeb20b4c8c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454829
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
_dif_sgl_fast_forward covers _dif_sgl_advance. Hence this patch
merges two into _dif_sgl_fast_forward and renames it to
_dif_sgl_advance.
Change-Id: I4949f3028b08cec8df8c9037c983d840d0a1eaaa
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456184
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch add support for VMD driver object.
New PCI device ID for VMD device was added.
Change-Id: I47bd8772a15ad370a14b7cc9460a177c91e6dd6a
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Signed-off-by: Orden Smith <orden.e.smith@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455545
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie32a1bb144c239b923b5cbb9e608a7dfc9c05208
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456076
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In Fedora release 28, plug in nvme device and run setup.sh,
the uevent is like this:
UDEV [1060.112118] add /devices/virtual/vfio/81 (vfio)
ACTION=add
DEVNAME=/dev/vfio/81
DEVPATH=/devices/virtual/vfio/81
MAJOR=509
MINOR=1
SEQNUM=8544
SUBSYSTEM=vfio
USEC_INITIALIZED=1060111894
UDEV [1060.122089] bind /devices/pci0000:d7/0000:d7:00.0/0000:d8:00.0 (pci)
ACTION=bind
DEVPATH=/devices/pci0000:d7/0000:d7:00.0/0000:d8:00.0
DRIVER=vfio-pci
ID_MODEL_FROM_DATABASE=PCIe Data Center SSD (DC P3700 SSD [2.5" SFF])
ID_PCI_CLASS_FROM_DATABASE=Mass storage controller
ID_PCI_INTERFACE_FROM_DATABASE=NVM Express
ID_PCI_SUBCLASS_FROM_DATABASE=Non-Volatile memory controller
ID_VENDOR_FROM_DATABASE=Intel Corporation
MODALIAS=pci:v00008086d00000953sv00008086sd00003703bc01sc08i02
PCI_CLASS=10802
PCI_ID=8086:0953
PCI_SLOT_NAME=0000:d8:00.0
PCI_SUBSYS_ID=8086:3703
SEQNUM=8545
SUBSYSTEM=pci
USEC_INITIALIZED=1060121805
Have tested several kernel versions such as v3.10, v4.10, v4.15, v4.19.
We didn't see an event which is like this:
ACTION=add
DRIVER=vfio-pci
Change-Id: I7299a2fb4d634edaa6bab3412ee8f363f66aae6f
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452053
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Move actual submission code to _spdk_bdev_io_do_submit, used by
both normal submission path and QoS path.
Previous patch(review.gerrithub.io/c/442127) adds the missing
bdev_io->internal.in_submit_request flag to QoS submission path.
But QoS submission path doesn't handle nomem_io yet.
This patch makes QoS submission path handle nomem_io in the same way
as the normal path and extracts actual submission code into do_submit
function, so that further modification of the submission logic will
apply to both paths automatically.
Change-Id: I41fa88d239c3a2bd9783d812826e32e7c887818d
Signed-off-by: lorneli <lorneli@163.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455252
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Make the old name a deprecated alias.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibbf50676e0d989b67121e465fc140f94faec46ed
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453033
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We flush a cache buffer once it's filled. When the write
for that cache buffer has completed, we look to see if
there's more data to flush. Currently if there's *any*
more data to flush, we will flush it, even if it's not
a full buffer.
That can hurt performance though. Ideally we only want
to flush a partial buffer if there's been an explicit
sync operation that requires that partial buffer to be
flushed. Otherwise we will end up writing the partial
buffer to disk, and then come back and write that data
again later when the buffer is full.
Add a new unit test to test for this condition. This
patch breaks one of the existing unit tests which was
designed specifically around a RocksDB failure condition.
Change that file_length unit test to now write exactly
one CACHE_BUFFER, which still tests the general logic
making sure that we don't confuse the amount of data
flushed with the value written to the file's length
xattr.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I83795fb45afe854b38648d0e0c1a7928219307a2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455698
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Data can get implicitly flushed as cache buffers are filled. But
the length xattr is only written in response to a sync or close
operation. So we cannot just look at the amount of data flushed,
and ignore the sync operation if all of the data written has been
flushed - we still need to write the length xattr.
This also adds a unit test which reproduces the original problem.
Fixes issue #297.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icca6ef4d1544f72e9bc31c4ee77d26b4b7f0cce4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455692
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Interpret volume->open() options as our vbdev_ocf_base struct.
This is used during metadata probe procedure, when there is no
vbdev configurations created, so we need to pass base structure
as option.
This patch is a prepartion for persistant metadata support,
and it does not change current behavior.
Change-Id: I0b7435df1692d8b3028931c6c9fc50d2d84b2557
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455415
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Hotremoving a bdev exposed as a vhost-scsi LUN which
has an allocated io_channel is broken now. By detaching
LUNs from their SCSI devices at the start of LUN
hotremoval, we can end up with the LUN's descriptor
completely leaked.
Upon hotremove, each LUN fires a hotremove_cb to the
upper layer (iscsi/vhost) and starts a poller to
periodically check if lun->io_channel has been closed
already. While iSCSI allocates and frees io_channels
for particular LUNs separately using
spdk_scsi_lun_allocate_io_channel(), vhost allocates
and frees io_channels for the entire SCSI device using
spdk_scsi_dev_free_io_channels(), as it knows there's
only one LUN per SCSI device.
Since LUNs are removed from SCSI devices at the start
of LUN hotremoval, the spdk_scsi_dev_free_io_channels()
is not able to close the io_channel of the child LUN.
That LUN is no longer referenced there, and the function
returns immediately without any error.
By reverting this patch, we practically defer removing
LUN from SCSI device until the bdev descriptor is closed,
that is, until that spdk_scsi_dev_free_io_channels()
and the subsequent spdk_scsi_dev_destruct() in vhost
is called.
Historically, spdk_scsi_lun_free_io_channel() was
introduced after vhost-scsi already supported hotremove,
so before we can introduce a change like this one we
have to refactor vhost to use the new APIs first.
This reverts commit 497997bc60.
Change-Id: I58a9988a22694f5b5b927173098ac8218270462e
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455371
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Padding requests are issued in multiple batches at the same time
when shutdown occurs. This allows for faster removal.
Change-Id: Iea40d2418bedbd7cf3c6865e5eb8f85871db13cd
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454578
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For the latest TLC NAND, one write buffer unit (rwb batch)
needs to be spread over three PUs instead of being allocated
to a single PU for better sequential read performance
since the optimal write size(ws_opt) of 3D TLC NAND is
3 times bigger than the optimal read size(rs_opt).
I added num_interleave_units in 'struct spdk_ftl_conf'
to configure the number of interleaving units per ws_opt.
If num_interleave_units is set as 1, the whole of the ws_opt
blocks are placed sequentially around each PU.
If num_interleave_units is set as N, the 1/N of the ws_opt
blocks are staggered. So consecutively numbered blocks
are separated by ws_opt / num_interleave_units.
The sequential read performance is improved from 1.9GiB/s
up to 2.97GiB/S with this patch on our system. No performance
degradation is observed on sequential writes or
4KB random reads/writes.
Please refer to the Trello card for more details.
https://trello.com/c/Osol93ZU
Change-Id: I371e72067b278ef43c3ac87a3d9ce9010d3fcb15
Signed-off-by: Claire J. In <claire.in@circuitblvd.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450976
Reviewed-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is the same intention as the patch for iSCSI in this series.
This change will be helpful to extract common part into a specific
helper library if necessary in future.
Change-Id: I1ce36b424ff2afb85f998149f4ef0d7153290802
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455621
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Recently DIF library refined SGL create operation by unifying
size and used count into unused count. This patch applies the
good practice in DIF library to create SGL in NVMe/TCP.
The next patch refines names of related function and variables
to be consistent in NVMe/TCP.
Change-Id: I1e73310c0e3650ede53672d76071a6c37dba82c1
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455473
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Recently DIF library refined _iov_ctx to support multiple iovecs
for DIF insert and strip operations. iSCSI library is the first
user of DIF insert and strip, and so rename _iov_ctx to _iscsi_sgl
to match DIF library. Names of related helper functions and
a member variable are changed together.
This change will be helpful to extract common part into a specific
helper library if necessary in future.
Change-Id: I3be3b6c3c476b0309ffafdecf3181fb2bb19abc6
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455620
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adopts the good practice in DIF library, and unifies
array size and used count into unused count.
Change-Id: Ifde15d1fa66dbd2578da771b5500e45a84664f63
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455475
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In some cases user may want to flag blob for removal
then do some operations (before removing it) and while
it happens there might be power failure. In such cases
we should remove this blob on next blobstore load.
Example of such usage is delete snapshot functionality
that will be introduced in upcoming patch.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I85f396b73762d2665ba8aec62528bb224acace74
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453835
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch moves _spdk_blob_set_thin_provision function
higher in the file as it will be later used during
blobstore load.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ife37ef8c69b88903646b2002b3561101c1eb5135
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455488
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
A PERSISTENT RESERVE OUT command with PREEMPT service action action is used to:
a) preempt (i.e., replace) the persistent reservation and remove registrations; or
b) remove registrations.
Change-Id: I906b09057e5ddef0ea2fe180bb5fff6e9e0a04f6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436092
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Any application client can release the persistent reservation and remove all
registrations from a device server by issuing a PERSISTENT RESERVE OUT command
with CLEAR service action through a registered I_T nexus.
Change-Id: Ie21885f7f9632b9da77e877fbce7c51b2e0b47a7
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436091
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
An application client releases the persistent reservation by issuing a
PERSISTENT RESERVE OUT command with RELEASE service action through an
I_T nexus that is a persistent reservation holder. The RELEASE service
action will release the persistent reservation and do noting to
existing registrants. Unit Attention isn't supported by SPDK so here
we will not establish any unit attention condition.
Change-Id: If0df3b3fc4e89ffa78d827e2b31cf5c61aa149db
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436090
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
An application client creates a persistent reservation by issuing a
PERSISTENT RESERVE OUT command with RESERVE service action through
a registered I_T nexus with RESERVATION KEY and TYPE, and persistent
reservation has a scope of LUN, only one persistent reservation is
allowed at a time per LUN.
Change-Id: I052d0ddd439dd9994c0793218dd5c5d6ed176d2c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436089
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To establish a persistent reservation the application client shall first
register an I_T nexus with the device server. An application client registers
with a logical unit by issuing a PERSISTENT RESERVE OUT command with REGISTER
service action or REGISTER AND IGNORE EXISTING KEY service action.
Specify Initiator Ports (SPEC_I_PT) bit and All Target Ports (ALL_TG_PT) bit
are not supported for now, the registrants belong to the I_T nexus who sends
the command.
Also Activate Persist Through Power Loss (APTPL) bit will be supported in
following patches.
Change-Id: If057a764a4bfa73017f98048c94b697dbfa4b4a1
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436088
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We throttle the number of data_in operations per
connection. Currently after a read is completed,
we try to send more data_in operations since one
has just been completed.
But we are trying to send more too early. The data_in_cnt
doesn't actually get decremented until after the PDU is
written on the socket. So this results in a case
where data_in_cnt == 64, and all 64 read operations
complete before any of those 64 are actually transmitted
onto the TCP socket. There are no more read operations
waiting, so we won't try to handle the data_in list
again, and if none of these 64 resulted in a SCSI
command completing, then the initiator may not send us
any more read I/O which would have also kicked the data_in
list.
So the solution is to kick the data_in list after the
PDU has been written - not after a read I/O is completed
back from the SCSI layer.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia01cf96e8eb6e08ddcaaeff449386e78de7c5bc5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455454
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The datain handling code path will set the LUN to
NULL if it finds a task's LUN has been hotremoved.
This could happen before the iscsi hotplug routine
actually gets a chance to run. If this happens,
one of these tasks doesn't actually get freed, and
then will be freed after the lun is closed -
causing a segfault in the bdev layer since it may
have a bdev_io associated with it.
Found by running the iscsi_tgt/fio test after
applying the next patch in this series.
There's more work needed in this hot remove clean up
path - currently we are just freeing a lot of PDUs
rather than completing them with error status when
a LUN is hot removed. But let's tackle that
separately.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8d27f0c7a79ae91cb6504e5ff6ffc8e346c9e54c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455460
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
when qemu connect to vhost, but don't send msg to vhost. We use
kill -15 to destroy vhost process. it will lead to deadlock.
(A)
* rte_vhost_driver_unregister()
* pthread_mutex_lock hold vhost_user.mutex (1)
* wait TAILQ_FIRST(&vsocket->conn_list) is NULL
(B)
* fdset_event_dispatch()
* vhost_user_read_cb() start
* vhost_user_msg_handler() start
* dev->notify_ops is NULL because qemu just connect, no message recv.
* vhost_driver_callback_get()
* pthread_mutex_lock hold vhost_user.mutex (2)
(A) & (B) deadlock
To avoid this scenes, when qemu connect in vhost_new_device()
initialize dev->notify_ops
Change-Id: Iaf699da41dfa3088cfc0f09688b50fada6b2c8d6
Signed-off-by: Tianyu yang <yangtianyu2@huawei.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454832
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use OCF per-volume UUID field to serialize bdev names.
This is going to be used during cache load to find out
which bdevs we want to attach.
Note that there is in fact "user_metadata" buffor that is
also stored in cache metadata, but we cannot use it
because its size is limited to 64 bytes.
UUID in OCF terms is not standarized
and is meant to be used to store custom immutable data.
This change preparation for persistent metadata support.
Functionality is not changed. (everything works the same way)
Change-Id: Ia9204fae29106f5b816d93a6771425a223d6c028
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455414
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change shutdown behavior such that now first bdev destruct() call
stops OCF cache instance.
Previusly, cache was stopped when single vbdev was referencing it.
This patch is related to persistent metadata support.
Without this change, every time a SPDK application is stopped,
only the last core is remembered in metadata,
because vbdevs detach by 1 by 1, each time updating the metadata.
Change-Id: I57db3f77db525177c024ee85e660a85aff2f8c31
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455413
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Fix instance function for OCF ctx interface.
This function is used for persistent metadata only.
Change-Id: I9583ea8eb21f07a3e9072a9552bed1c077cb7114
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455412
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Make init_vbdev() accept NULL as cache_mode if loadq flag
is set.
This is needed for load path because we don't know cache mode
before the actual load (happens later).
This change is related to persistant metadata support.
This patch does not change current behavior because loadq flag
is always false.
Change-Id: I42727eb841d87903c81bd5e6d51b6d4869ed9be3
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455411
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Implement load path for OCF cache.
During load OCF will read metadata from cache disk and restore its state.
management_channel initialization is moved before cache load/attach part
because ocf_mngt_cache_load() needs it to read metadata.
This patch is a preparation for persistant metadata support.
Load path is never used yet because loadq flag is always false.
Change-Id: Iff6c1c52eae7b9f52812a8bd3d5ae6d6facedd60
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455410
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add new loadq flag that indicates if vbdev
should load cache instance from disk or start a new one.
This change is a preparation for persistent metadata support.
Functionality is not changed in this patch as the loadq flag is always false.
Change-Id: I1baac7f988e6eeadb4f365ba7bfab8019d55a753
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455409
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Do management flush during OCF shutdown to write all dirty requests to cores.
Dirty requests are relevant to WriteBack mode only.
Change-Id: I778a73ed8ab5659921f192f638027d513c239814
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450683
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Implement cleaner that is used in WriteBack mode.
Cleaner is a background agent that does synchronization
of data between cache and its cores.
Cleaner usually runs every ~20 seconds to perform cleaning.
The synchronization is a simmilar operation to OCF management flushes.
We need cleaner for WriteBack because only WriteBack mode
produces dirty data that cleaner needs to deal with.
Cleaner requires adopting trylock() because in current version
cleaner uses management lock when performs cleaning,
which may lead to deadlocks if cleaner runs on
the same thread as management operations.
WriteBack mode is fully functional after this change,
but persistent metadata support is required to use it for production.
Cleaner will run on management thread for now.
We plan to implement functionality of
chosing a CPU core where cleaner should run.
Cleaning policy is not configurable yet.
The default is ALRU with 20 sec interval.
Change-Id: I35aa7e00c44e0d7a77e64e60df1f66f20be03f55
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448537
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Create new management channel and handle sharing between vbdevs.
This channel is going to be used for management operations
that produce IOs (such as flush) and also for cleaner.
Change-Id: Ieeed8454a7ab7459c86ac06ec6c0ece038bc928e
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455272
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Declaractions for those functions already have dst
and src as param names, but definitions use set1 and
set2, which doesn't really tell which one is which.
My IDE actually gives me tooltips with param names
from definitions and it would be much easier to see
"dst" and "src" in there.
Change-Id: I45013cf27fc95f69cb2c776fb1b6701c5e60e373
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455163
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Implement management queue for asynchronous management that is provided
in new OCF API. This is a neccessery step to be able to implement
metadata support.
OCF submodule was updated to get management queue functionality
It has to be done in this patch because OCF module will not work
otherwise.
Change-Id: Id19c2e5bd6a5d26fee41752b62720e408dc082e8
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448619
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
OCF queue list needs to be managed synchronously.
This patch uses our own mutex to achieve that because we cannot rely on
ocf_mngt_cache_lock() as it may produce deadlocks when using
cleaner.
Alternative way would be to use trylock, but
we need to register a poller for it and do locking concurently
which doesn't seem to be possible in callbacks of io channel.
We agreed with OCF team that we are going to change this part
when OCF will deliver safe ocf_mngt_cache_lock() function.
This patch fixes a very rare failure on our CI that looked like this:
```
04:33:02 vbdev_ocf.c: 134:stop_vbdev: *NOTICE*: Not stopping cache instance 'Malloc0' because it is referenced by other OCF bdev
04:33:03 MalCache1: Core core2 successfully removed
04:33:03 MalCache1: Stopping cache
04:33:03 MalCache1: Done saving cache state!
04:33:03 src/ocf/mngt/ocf_mngt_cache.c:1576:2: runtime error: pointer index expression with base 0x000000000000 overflowed to 0xffffffffffffffa8
04:33:03 #0 0x7f3c52d54c26 in _ocf_mngt_cache_stop src/ocf/mngt/ocf_mngt_cache.c:1576
04:33:03 #1 0x7f3c52d5579f in ocf_mngt_cache_stop src/ocf/mngt/ocf_mngt_cache.c:1657
04:33:03 #2 0x7f3c52cbe9f4 in stop_vbdev /var/jenkins/workspace/NVMe_tests/nvme_phy_autotest/spdk/lib/bdev/ocf/vbdev_ocf.c:147
04:33:03 #3 0x7f3c52cbf4a0 in vbdev_ocf_destruct /var/jenkins/workspace/NVMe_tests/nvme_phy_autotest/spdk/lib/bdev/ocf/vbdev_ocf.c:216
```
Change-Id: Id6fafb444958f3becdc480e44762074c6c081e1f
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450682
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Introduce cache context structure that is going to be used
for sharing per cache info. For example: management queue,
cleaner_channel, cleaner_thread.
Lifetime of this structure ends with last vbdev that gets unregistered
and NOT when cache stops because cache does not have to be freed
there.
Change-Id: I66252084d7efda92edd10fb737c8e9c8169b4f6d
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451403
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Adapt to new async API which was changed recently
This is a neccessery step to be able to implement persistent metadata support
OCF submodule was updated to get new API
Change-Id: I6bf9941ab0557981235c5be27686594a1b8ac3a0
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448397
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Move last step of register chain to the top because it is arguably more readable.
This should not be done in previus patch because it spoils the gerrithub diff.
Change-Id: If51642a32c5cf2a757ca20485d2347410653ca2a
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454574
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Use new trylock API to prevent lockups when using OCF cleaner.
Starting and stoping OCF bdev becomes asynchronous with this patch.
Using trylock means that we have to poll function that does locking each
time we want to initiate some operation on cache instance.
This is the reason why management functions become asynchronous.
Each management operation now has a _poll() operation associated with it.
_poll() uses trylock and continues when cache is locked.
Change-Id: I83b9fbe87c27433e178583411b87a68b8efaf58e
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447888
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch is a preparation for adopting ocf_cache_trylock() function.
Register OCF bdev path uses vbdev_ocf_mngt_ interface now
Register stays synchronous blocking operation in this patch,
but with adoption of ocf_cache_trylock() function,
register will be asynchronous, in which case we
want to use mngt_ interface.
This series of OCF patches will enable WriteBack support for OCF bdev.
There is a lot of preparation before we will be able
to actually implement WriteBack.
Dependencies look like this:
- WriteBack
- Cleaner
- trylock
- Persistent metadata
- asynchronous management API
Cleaner is a background agent that does synchronization
of data between cache and its cores.
Cleaner usually runs every ~30 seconds to perform cleaning.
The synchronization is a simmilar operation to OCF management flushes.
We need cleaner for WriteBack because only WriteBack mode
produces dirty data that cleaner needs to deal with.
Cleaner requires adopting trylock() because in current version
cleaner uses management lock when performs cleaning,
which may lead to deadlocks if cleaner runs on
the same thread as management operations.
Peristent metadata is functionality of OCF
that allows to restore cache state after shutdown
We need persistent metadata in context of shutdown
with some data being dirty which may only happen
when using WriteBack mode
Support for persistent metadata requieres
asynchronous OCF API because in current version
we will have a deadlock during metadata initialization
because it is required to be done on different thread
than cache initialization.
Change-Id: I45d84a5fa0c96581d522050dad186b06d489226e
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455225
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Apart from writing the data to OCSSD, mirror the latest two bands of
data on the persistent write buffer cache. Currently the data is only
sent there, further patches will add metadata support, shutdown recovery
and L2P updates.
Change-Id: Ief05d0c23fa0e25bd6085e0ce3e1528d6736d174
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450266
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function can be used to reduce the number of iovecs on exisiting IO
structure. It's useful when only the maximum number of iovecs is known
at the ftl_io allocation time.
Change-Id: Ief06634446c65889401f5e0b07b2d1ce7912af34
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450630
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
When we create AIO using the RPC interface, we can use the error
message to return to determine what exceptions have occurred.
Change-Id: I537f1a7d1053dcc27960de004fd0b4aea49919e9
Signed-off-by: Tianyu yang <yangtianyu2@huawei.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452313
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Submission logic was incorrect and completion logic was not
present yet. This passes now with multi-thread bdevio test.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia8ed1c123be511240d93503a2c5e501ccad445bf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455018
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Adding these tests identified a small fix in the code under test
that is also included here. The compressdev 'produced' field
is unsigned and reduce is expecting a negative errno in the
callback.
Change-Id: I28ab11ee3ef54768a9d6ccd26282cf7dd022be43
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454806
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Two quick updates, support dequeueing more than 1 IO at a time which
is now more likely given that we can queue up compression operations
(others can come in qhile one is on the queue).
Dropped the max inflight value as it was in there as a palceholder
and now it makes sense to give it a sane value. Also updated the value
passed to reduce to signal an error.
UT for the poller will come in the next patch...
Change-Id: I14d6aeb98aa1e193c498e1549e37eca0e4c56c31
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454680
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This avoids dereferencing the request to get the qpair
in cases where we already know the qpair. Adding a new
variant instead of just modifying nvme_free_request()
since there are 72 calls to this function and I don't
want to change all of them.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifd6fd964e546bcd71ff180fd71d5bf5cbab79d4f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455287
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In some cases we have the qpair already when calling
this function. So pass the qpair to avoid having
to get it from the request. This shows about a 3%
performance improvement for high IOPs single core
tests.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I22fcca560492f4e7cf5ffedd252e41a027d0dd79
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455286
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This matches the Linux kernel target. Users can
still decrease this default when creating the
transport (i.e. -p option for nvmf_create_transport
in rpc.py).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icad59350a2cd35cfc4ad76d06399345191680c05
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454820
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When parent IO was splitted into several children requests, SPDK
may return parent completion callback with error status before
all the children requests are finished.
Change-Id: I63221a0ae1a5925a7fcd9744b4f5d8079c641252
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453611
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We tried to send two responses for a single RPC request.
Fixes#798
Change-Id: I37eebd6a1212f6ab2c026b7587415e42c3c7417e
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455220
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Lightweight threads may now be exited by calling
spdk_thread_exit() within the thread. The framework
polling the thread can release the resources associated
with that lightweight thread by calling
spdk_thread_destroy().
Change-Id: I6586b9d22556b3874fb113ce5402c6b1f371786e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455319
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
We no longer have any assumptions about vhost memory regions
size being a 2MB multiple, so we can get rid of the security
check preventing some vhost sessions from being initialized.
It will be necessary for virtio-vhost-user, whose memory comes
from PCI BARs and its size may not be a 2MB multiple.
Change-Id: I48f9bc20f4c61aefdddf39ade875867148f0ed75
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454879
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Currently, we translate each 2MB chunk to manually check
if it's contiguous with the previous one, but there are
rte_vhost APIs that do it way more efficiently.
rte_vhost_va_from_guest_pa() was introduced in DPDK 18.02,
but was backported to 17.11 as well, so we don't even need
any RTE_VERSION ifdefs to use it now. This function
calculates the remaining region size instead of trying to
translate subsequent 2MB chunks over and over.
The previous rte_vhost_gpa_to_vva() was deprecated a long
time ago and after this patch we no longer make any use of
it.
DPDK usages of this new function check if the translated
memory region has 0 length, which seems very silly, but
let's just do it in SPDK as well.
Change-Id: Ifae8daa5f810b5a2ba1524958ad2399af700b532
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454878
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Had 0 hardcoded early on, this just uses the queue pair that
was pre-assigned to the compression bdev to use when interacting
with the cryptodev API.
Multi-threaded testing is coming later.
Change-Id: Iab8ea4e59169980933e9c81715baf4d41803b572
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453921
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The compressdev enqueue call will return the number of ops that
it was able to accept. By design this will always be 1 for our
implementation so check that to make sure.
If it is 0 then we queue the compression operation up and try
again after something is dequeued in the poller.
We will also queue if we can't get an mbuf or op from our pools.
Change-Id: I7285749b4a599d1ee265e3c3e16073f25c4d7469
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451686
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The new, simplified scsi lun hotremove path doesn't call
lun->hotremove_cb if there's no io_channel allocated for
that lun. Vhost still depends on that callback and currently,
when the underlying bdev is removed, vhost is left completely
unnotified. It keeps a dangling pointer to a scsi lun and
will eventually crash. The vhost scsi controller also can't
be removed in this case.
This reverts commit 19182431c8.
Change-Id: I330330fdd7d6941db070d972192481f535f62977
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454836
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We should add assert here to avoid be divided by zero,
that resolve this scanbuild error.
Change-Id: I12fa11cdbf0f608995f91759140408303e243357
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454539
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Replaced (uint64_t *) dereference of (char *) variable with memcpy to
avoid unaligned memory access. It fixes the following error reported by
ubsan:
spdk/lib/blobfs/blobfs.c:1492:2: runtime error: load of misaligned
address 0x00000047a136 for type 'uint64_t', which requires 8 byte
alignment
Change-Id: I5f3f28a52b8cbe3eb30394ae7ebd0e64b683db57
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454886
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These two paths do the same thing, only spdk_bdev_io_get_buf tries to
allocate the buffer directly, while spdk_bdev_io_put_buf reuses the
returned buffer for one of the waiting requests.
Change-Id: I341a011f3a16a99de399c8b56fa73ccd9c7fe4fa
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451466
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Moved device configuration checks inside ftl_check_init_opts to allow
for validation against the geometry of the drive.
Change-Id: I8e813d30ef5feba641517872ce068824442cfdbc
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451516
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Claire Jihyun In <claire.in@circuitblvd.com>
Reviewed-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
It's 3 functions that are only called from this compilation
unit.
Change-Id: I033ced4c19ee2a33b9537c347532ea5706d02d6a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454493
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add uninstall target to makefiles to be able to perform
reverse of install target.
Fixes#464
This patch adds 'uninstall' target to makefile.
'make uninstall' will remove spdk_tgt app, headers, libraries
and shared libraries from system directories defined by $DESTDIR.
Additionaly, if there will be any empty directories left after
this operation, they will be removed as well.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I7b07fb4b81081d3914ff09165991fbe3a26b9067
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/431471
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Access to field 'tqh_first' results in a dereference of a null pointer
set = TAILQ_FIRST(&channel->reqs).
Add asserts to check if channel got NULL;
Change-Id: Ifd8d131a2432328d683e7fb9357fdd23b2396cf2
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454536
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Here we should consider about that ctrlr may be NULL,
so add assert here.
Change-Id: If4c8b2c6382ae6fdad541168d2e2b856fb5b8182
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454546
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch allows multiple iovecs as argument in spdk_dif_generate_stream.
Subsequent patches will support DIF strip and insert in SPDK NVMe-TCP
target based on the patch series.
Change-Id: I1f3d6c5b9f924bb52525e1611db403846d087563
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453756
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
As a subsequent effort, this patch changes the interface of
spdk_dif_generate_stream to accept SGL data buffer.
This patch allows only a single iove. The next patch will allow
multiple iovecs.
Change-Id: I56f901d73ca3b9da4b56c213ebafcd7706b1fef8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453755
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch allows multiple iovecs as argument of
spdk_dif_set_md_interleave_iovs.
Subsequent patches will support SGL data buffer in
spdk_dif_generate_stream too. UT code tests only
spdk_dif_set_md_interleave until then.
Change-Id: I7ac03a3c8f7bcd922af4f29b404ebf3acc4b89e5
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453736
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently iSCSI target have used a single contiguous data buffer
both for read and write I/O. Hence spdk_dif_set_md_interleave_iovs
accepts a single contiguous data buffer and its size as arguments.
On the other hand, NVMe-TCP target recently has changed to use
SGL data buffer instead.
DIF strip and insert will be supported in NVMe-TCP target next,
and updating spdk_dif_set_md_interleave_iovs to accept SGL data
buffer will be helpful.
This patch changes the interface of spdk_dif_set_md_interleave_iovs,
but allows only a single iovec. The next patch will allow multiple
iovecs.
Change-Id: I31b09814f8ec920e463a5b1be8fb88cad7d277fb
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453735
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously _iov_iter_fast_forward can fast forward only from the
start of the iovec array. This patch enables fast forward in the
middle of the iovec array.
Change-Id: I801fc46dec3c759e1d754042abe15e7100cbdc17
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
By clearing head_align to zero after using it, we can merge two code
blocks into a single while loop, and replace goto by simple break.
Change-Id: Ia63cd0d7dbf4b9dddf7da93e11351bb46bd04791
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454394
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
struct dif_sgl had been used only to iterate the passed iovec
array. This patch utilizes struct dif_sgl and adds a helper
function _dif_sgl_append() to simplify to create iovec array.
_dif_sgl_append() is a static function and we have to add
the callee together when we add any static function.
So this patch adds both even if the patch size is a little
larger.
Besides, iovcnt has been used to mean the number of elements
in the iovec array widely in the DIF library. So this patch
changes the name of it from num_iovs to iovcnt.
Change-Id: I1db4abc8ed4d2c107fe01ec6592f5f6731dc5520
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454558
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously whenever bdev module went through init>fini>init,
the async modules would trigger assert in spdk_bdev_module_action_done().
This was because starting value for action_in_progress was being
set only once - during registration of the modules.
With this change, modules are set as async just before their init start.
Change-Id: If177a8dc97812b1b264cb61d5ad202ce47fca3b5
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454614
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Set the PPA to FTL_PPA_INVALID during IO initialization to explicitly
mark it uninitialized.
Change-Id: I75ca1644b59501056f0d4ea8a4f446fd1b770045
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453684
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Removed unused 'context' parameter. Removed 'lbk' parameter from
next_ppa function signature, as it could be easily deduced from ftl_io
passed as the first argument.
Change-Id: I2b2b699ffc1b282086adcc2d4dc6c4691a87a7c5
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454228
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Record last processed LBA instead of the first one when tracing IO
completion.
Change-Id: If16a6d0f5a82b5317ab391f9e49c6aa0f372ab97
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454227
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Replaced all direct accesses to io->lba / io->iov with getter functions,
as they both should behave differently based on the FTL_IO_VECTOR_LBA
flag and io->iov_cnt respectively.
Change-Id: I0d387a2a908cc37afa9e1b97ca5b408cef0d6b08
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450265
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Allow user to set timeout for poller in management operations.
Now also all management pollers have 5 sec default timeout.
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Change-Id: Ic75f2b150ef21ccd673b80aa84f16c9a24f90e32
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453655
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Add stop function to management interface.
It is needed for error handling when execution has to be aborted early.
Example flow:
```
rc = op();
if (rc) {
handle();
vbdev_ocf_mngt_stop();
} else {
vbdev_ocf_mngt_continue();
}
```
This can be improved in the future, because currently, error
handling cannot be a management operation on its own (but should be).
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Change-Id: I9ba528db8a9957ee561e5c1b5528b16bd143d5d8
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453654
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
We could run into issues with this if we were using an arbitrarily large
amount of cores to run SPDK.
Change-Id: Ia7add027d7e6ef1ccb4a69ac328dbdf4f2751fd8
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452250
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This change unifies the DIF library to use dif_sgl throughout.
Change-Id: I60addcf05e75b823e4dfb216122bf46edbc42e78
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454528
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Using for loop is better for a few cases now.
Change-Id: I48e3a276fb860f2b969e7c331bdfdac8102172d7
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454527
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The struct _iov_iter has been used to iterate the passed iovec array.
Subsequent patches will share the struct among iteration and
creation. To clarify this update, rename the struct _iov_iter to
_dif_sgl. The name sgl has been already adopted widely in SPDK.
Change-Id: Iab81bcb0658fbd0e39305e045c3d0aadba8fc55f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454525
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The new added API can load file content into a data buffer, which
can be used to read configuration file as well as JSON file, and
we can add WRITE API in future which can be used to implement the
persistent reservation feature.
Change-Id: I9aaca7571648e1ab6dbfdd7cfd6ca34083cbeec2
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453498
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Make this explicit instead of implicit.
Change-Id: Iab1b856648e1f11722e1f76602f1eee4bc4ed0b5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454381
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Replace remove_base() function by smaller ones:
detach_cache(), remove_cache_bdev(),
detach_core(), remove_core_bdev()
This change is necessary for implementing asynchronous unregister using
trylock API.
Also introduce stop status variable because unregister path has changed.
Change-Id: I62599cafacdba685848bd7d32d3d5245907ee4a1
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452416
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reorder function for register and unregister path to make code more
readable.
Change-Id: I3479b231de1f6a4f84f9538f345e62eb73e6847c
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452415
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
