These checked parameters are necessary themselves even for single path
configuration.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ie1eb2f51eeec1dbc634c6bae462a41d4c209d6ac
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12052
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <yidong0635@126.com>
Community-CI: Mellanox Build Bot
Since base device doesn't require VSS, FTL introduces a mechanism that
will allow for recovering both the P2L and write pointer of open bands
after a dirty shutdown. After writing 1MiB of data to a band, a 4KiB
block describing the P2L will be persisted to cache device, effectively
emulating VSS for the base device.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: Ic6be52dc09b237297a5cda3e752d6c038e98b70e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13367
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Track the relative sequence of opening and closing bands and chunks.
Necessary for detecting the most recent user data during dirty shutdown recovery.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I682030e58284d7b090667e4e5a9f4bbc7615708a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13366
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The word engine was both used (interchangeably with module) to refer to
the things that plug into the framework and to the framework itself.
This patch eliminates all use of the word engine that meant the
framework. It leaves uses of the word that meant "module".
Change-Id: I6b9b50e2f045ac39f2a74d0152ee8d6269be4bd1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13918
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
For non-fabric controllers, the corresponding I/O qpairs are simply
re-enabled at controller reset.
This had a issue when I/O qpairs span multiple threads and poll group
is used.
spdk_nvme_ctrlr_reconnect_poll_async() calls
nvme_transport_ctrlr_connect_qpair() with qpair->async being false.
Then nvme_transport_ctrlr_connect_qpair() calls
spdk_nvme_poll_group_process_completions() until the qpair is connected.
spdk_nvme_poll_group_process_completions() may poll other qpairs.
This may cause I/O to complete on a wrong thread.
For PCIe controller, spdk_nvme_poll_group_process_completions() calls
spdk_nvme_qpair_process_completions() simply for each qpair.
Hence change nvme_transport_ctrlr_connect_qpair() to call
spdk_nvme_qpair_process_completions() if the controller is non-fabrics.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ieb270c2fb154124021ef6d25577b817d05e5ca9e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14295
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
There's no reason for this parameter to be non-const and it makes this
functions pain to use when you want to hardcode a specific sock
implementation.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ifed4426a02ab54cbd51c8a2051b1eac010f86db9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14303
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
If the being disconnected qpair is the last of a poller of a poll group,
CQ is destroyed and the poller is released before the qpair is actually
disconnected.
This patch destroy CQ and release the poller after the qpair is actually
disconnected.
One exception is when spdk_nvme_ctrlr_free_io_qpair() is called to a
connected qpair. In this case, the qpair is removed from a poll group
before the qpair is actually disconnected. In this case, destroy CQ and
release the poller when the qpair is removed from the poll group.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Idf266bbb6dbb40f04ae6313db724fabf80865763
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14253
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Adds necessary functions for setting up the state of FTL components
based on loaded in metadata.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I3a4c05230c877850e61d4f31d495d38121d27b3f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13362
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
bdev_nvme_create_bdev_channel_cb() did not initialized the multipath
policy of the newly created channel. 0 was active-passive and hence
multipath policy was always initialized to active-passive.
Fix the bug and add unit tests for verification.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I6e44108740da4b9ff72311ae4b5500558c65c5c3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14225
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Admin passthrough supported retry and failover as same as I/O by
using the bdev_retry_count. However, doing retry or failover for
admin passthrough may have unexpected side effects and its value
is not clear. The safest way is to limit retry and failover for I/O.
If we need to support retry and failover for admin passthrough,
restore the code and add a new option bdev_admin_retry_count.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I680513a40a80041f6ea6f546c74c672f2a81812d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14227
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Adds a debug function, that scans the whole P2L of band, when
it's getting closed. The P2L is compared against both L2P and
valid map to check for any discrepancies.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: Ia4d7be65415e6af3752d676de69b6fdcb73effb4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13352
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Adds P2L validity map tracking - a bitmap marking all physical LBAs
as containing valid (current) user data or not. A clear bit denotes
the location has no valid data and may be skipped during relocation
or compaction. A set bit means it may have valid data (it's still
necessary to do the necessary comparision against L2P).
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I6a831a97b3080eb7c880d9c4feab41b523467885
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13350
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Adding API for the bringup part of fast shutdown/startup. Adds
shared memory utilization for necessary functions during initialization.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: Iab2da102fd0ccaa56fbdb9b3c765be5eeefff145
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13349
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Stores P2L map of open bands in shared memory, allowing for
faster recovery times from application crash.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I519441af05e4d0f57768835bf01c800556873c58
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13347
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Allows for using shared memory in memory pools. Adds API for
accessing such pools after dirty shutdown (claiming them, ie.
marking an entry as actively used; calling the
ftl_mempool_initialize_ext will reclaim all unused entries back
to the pool). Also introduces API for accessing objects, since
using direct pointers is not possible (as addresses may change
inbetween application startups).
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I5325b39d68aef7e231945cee9d92c925cab2fb2a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13346
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Main use case is to allow for keeping it in shared memory, to
speed up the recovery time after application crash.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I36b6b8331cd6483c5bd202e5f9103c351d705da8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13345
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Relocation will
1. Read LBA map of a given band
2. Pin the LBAs
3. Issue writes of valid LBAsto the new location
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: Ie753a790e56a86bfa1e451b5eda78b88eeacd3cb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13344
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Multiprocess is only supported by a few libraries (e.g. NVMe driver).
Other libraries that don't support it will often fail on mempool
initialization when running as a secondary process, as the mempools are
already created by the primary process. But the error messages are
vague and don't indicate why this happened. So, this patch adds a check
to see if a mempool exists after spdk_mempool_create() fails and prints
an error message informing users that multiprocess is unsupported.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I6f915a94266e64dda380e3b269424cc579372a10
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14234
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Fixes #issue 2636.
The existing allocation method (nvmf_rdma_get_optimal_poll_group())
is traversal and unperceived link disconnection. A more fair method
considering the number of real-time connections to allocate a poll
group is implemented.
Signed-off-by: liuqinfei <18138800392@163.com>
Signed-off-by: luo rixin <luorixin@huawei.com>
Change-Id: Ic1e6283e386dbb0dd6655bedebe26aeedb16c333
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14002
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Introduce new tests for compare with metadata. Tests
if compare is successful or miscompare for both interleaved
and separated md. We test the normal io path and the
fall-back provided by the bdev layer.
Signed-off-by: Jonas Pfefferle <pepperjo@japf.ch>
Change-Id: Iaefb6d3201cd9cc800422d494c6ef7494e104afd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14133
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Add writer - tracks and manages band state transitions and write pointer as IO
is issued to it.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I5f878dc15bc1c1ac84835f75fe440672fad541d5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13335
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This ensures that when fields are added, that the
size of the structure will change, ensuring different
versions of the structure can be detected using
sizeof.
Adding -Wno-address-of-packed-member to Makefiles
here, although we should consider disabling this
warning globally in SPDK just like DPDK.
Suppress abidiff errors around spdk_app_opts -
structure size and offsets of all existing members
were unchanged, so there is no ABI breakage here.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2249eddb604d7b44180cadb92ba30edcd946b9bd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14091
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Avoid putting a new req on the outstanding_reqs
TAILQ until we know it can be initialized
successfully. This avoids adding to the TAILQ
only to remove it just after.
This allow simplifies the outstanding_reqs TAILQ
handling, since reqs are now only inserted and
removed in one place each.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5ccc41c14abd541ffcf2a602246e0671386840c7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13991
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will help keep the mixing of this code with the framework code to a
minimum.
Change-Id: I5937ebd84f32068456cdf2b9e03d3e194c760a87
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13912
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
These are 1:1 - they do not need to be separate objects.
Change-Id: I74ab52863f911d9be59ce98e1525302b5bd40846
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13910
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
ioccsz is specific for fabrics. spdk_nvme_ctrlr_is_fabrics() returns
true for custom fabrics transport. Hence we can use
spdk_nvme_ctrlr_is_fabrics() safely in nvme_ctrlr_update_nvmf_ioccsz().
Before this change, in the unit tests, ctrlr->trid.trtype was set to
zero at initialization. After this change, for most cases,
spdk_nvme_ctrlr_is_fabrics() should return false for most cases.
SPDK_NVME_TRANSPORT_PCIE did not work. Hence, initialize
ctrlr->trid.trtype by SPDK_NVME_TRANSPORT_CUSTOM_FABRICS instead.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I4bedcab4a9f2876c1c9463ff10ad0966754f1713
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13948
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Get a PD for the device from the PD pool managed by the RDMA provider
when creating a QP, and put the PD when destroying the PD.
By this change, PD is managed completely by the RDMA provider or the hooks.
nvme_rdma_ctrlr::pd was added long time ago but is not referenced
anywhere. Remove nvme_rdma_ctrlr::pd for cleanup and clarification.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: If8dc8ad011eed70149012128bd1b33f1a8b7b90b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13770
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
SPDK NVMe RDMA initiator used the default PD per RDMA device. Default PD
may be changed when all QPs for the RDMA device are destroyed and created
again.
For multipath, the RDMA zero copy feature require the PD per RDMA device
to be persistent when all QPs for the RDMA device are destroyed and
created again.
Maintain such persistent PDs in this patch.
Add two APIs, spdk_rdma_get_pd() and spdk_rdma_put_pd().
In each call of two APIs, synchronize RDMA device list with
rdma_get_devices().
Context may be deleted anytime by rdma-core. To avoid such deletion,
hold the returned array by rdma_get_devices().
RDMA device has PD, context, ref. count, and removed flag. If context
is missing in rdma_get_devices(), set the removed flag to true. Then,
if the ref count becomes zero, free the PD and the RDMA device.
The ref. count of a RDMA device is incremented when spdk_rdma_get_pd()
is called and decremented when spdk_rdma_put_pd() is called.
To simplify synchronization, sort the returned array by
rdma_get_devices().
To avoid resource leakage, add destructor function and free all PDs
and related data at termination.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I093cb4ec2c7d8432642edfbffa270797ccf3e715
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13769
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
There may be for_each operations outstanding on an
io_device when it is unregistered. Currently we just
return when this happens, not unregistering the
device but also not notifying the caller that this
happened (since it returns void, and the callback
function doesn't have a status parameter either).
We could just push this responsibility to the caller,
to never unregister an io_device if it knows it has
outstanding for_each calls waiting to complete. But
I think we can simplify this a lot by just handling
this inside of the thread library. Mark that the
device is pending registration, and unregister it
(on the original requesting thread!) when the
for_each count gets back to zero. Also don't
allow any new for_each operations either.
Note this requires a bit of refactoring on the
thread unit tests, since it is now possible to
unregister a device with outstanding for_each
operations.
Fixes issue #2631.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I978f2d99a25e65d2b7d71ce9b1926a79a6c94263
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13890
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When decoupling a snapshot from its parent, we need to clear its parent.
So we should remove the xattr BLOB_SNAPSHOT. Modifying the xattrs of a blob
only works if its metadata are not in read-only mode.
By default, a snapshot is in read-only mode so this operation fails. When we
later want to delete the snapshot, we will see that it has a parent, so we will
try to remove the snapshot from its parent's clones list. This will cause a
crash.
The fix is to remove the BLOB_SNAPSHOT xattr only after setting the snapshot's
metadata in rw mode.
Signed-off-by: Alex Michon <amichon@kalrayinc.com>
Change-Id: I80efa6dd3dcb38b4c738ce2e97aa2ffc281cefa5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13723
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
the sizeof(g_vals) should be the num of array, not the num of bytes. see follow:
CU_ASSERT(spdk_json_parse(g_buf, sizeof(in) - 1, g_vals, sizeof(g_vals), &g_end, flags | SPDK_JSON_PARSE_FLAG_DECODE_IN_PLACE) == num_vals);
Fixes#2623
Signed-off-by: tongkunkun <tongkunkun_yewu@cmss.chinamobile.com>
Change-Id: I3b7994606284fe3464650337ecb0f723a627f7aa
Reported-by: Jim Harris <james.r.harris@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13841
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In prep for upcoming patch that will provide an RPC to override
and automatic assignment of an op code to an engine.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I17d4b962fb376a77f97ce051a513679d0fba698e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12829
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is another preparation to create and use ibv_context and pd.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Signed-off-by: Denis Nagorny <denisn@nvidia.com>
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: Id594fa1ccb2daf535b1aaaef0a397bda2ec98578
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13710
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The function `nvme_ctrlr_init_ana_log_page` is exactly
same with `nvme_ctrlr_update_ana_log_page`, so remove it.
Change-Id: I1ad51635f47cf95cfa6de217e3b9144885c3b74e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13652
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
allow DSA device to async offload crc32 calculation in nvmf-TCP
This patch can use DSA to accelerate crc32 computation, making
the io performance of TCP paths using crc32 approach the io
performance of TCP paths that do not use crc32.
Using SLIST to minimize the performance drop. SLIST has less
operation compared to TAILQ.
Thinking about memory thrashing, we should use the same memory as
possible to receive new PDUs. So, insert newly freed PDU in to head
is better.
The performance drop is within 1% compared to the TCP path without
crc32.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: I480eb8db25f0e730cb198ca5ec19dbe3b4d38440
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11708
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Original implementation creates pollers and CQs for all discovered
devices at poll group creation. Device (ibv_context) that has no
references, i.e. has no QPs, may be removed from the system and
ibv_context may be closed by rdma_cm. In this case we will have a CQ
that refers to closed ibv_context and it may crash in ibv_poll_cq.
With this patch pollers are created on demand when we create the first
QP for a device. When there are no more QPs on the poller, we destroy
the poller. This also helps to avoid polling CQs that don't have any
QPs attached.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I46dd2c8b9b2902168dba24e139c904f51bd1b101
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13692
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When a bdev is registered, it is examined by the bdev modules before the
bdev register even is notified.
Examination may be asychronous, e.g. when the bdev module has to perform
I/O on the new bdev.
This causes a race condition where the bdev might be destroyed while
examination is not finished. Then, once all modules have signaled that
examination is done, `bdev_register_finished` makes an invalid access to
the freed bdev pointer.
To fix this, defer the unregistration until the examine is completed by
opening a descriptor on the bdev.
Change-Id: I79a2faa96c1c893fc1cee645fbe31f689b03ea4a
Signed-off-by: Nathan Claudel <nclaudel@kalray.eu>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13630
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This avoids confusion with the public idxd.h
header file which causes problems with abidiff.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7910c93d9d95b99c82f4dfdba845e6804e1b6568
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13729
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When `dif_insert_or_strip` is enabled, NVMf library will do
DIF insert and strip automatically, client isn't aware of
it, when `dif_insert_or_strip` is disabled, we will report
Namespace E2E Protection Capabilities to client, but we
don't process PRACT and PRCHK flags in NVMf library, so
here we don't report the capabilities to client and leave
the use of extended LBA buffer to users.
Change-Id: Ic610dc65fef210a7799c6ab693d89138b99e1193
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12165
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Some of the options in sock_impl_opts could be different for different
sockets (even if they're using the same impl). However, outside of a
few selected options (recv_buf_size, send_buf_size), there was no
interface to change them.
This change will allow users to change impl_opts on a per-socket basis
when creating a socket. Sockets created through accept() inherit
impl_opts from the listening socket.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I7628ae19def25cef6ffa62aa54bd34e446632579
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13661
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Also remove ftl_mngt_get_status() because it won't be necessary now.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I335831cb1c506379e9afeb0bf87f1f873033073d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13668
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
That is possible to get/set registers from any thread,
during regs processing we are polling admin qpair to
get a completion. At the same time, another thread
can also poll admin qpair and that can lead to
undefined behavior.
This patch fixes an issue when bdev_nvme is configured
with io_timeout. If remote target becomes unresponsive
(e.g. due to link down), IO timeout occurs and bdev_nvme
tries to get csts registers in timeout_cb. At the same
time another thread can process adminq, so we may have
2 simultaneous adminq polls. If admin qpair is disconnecting
at that time (RDMA transport) we may destroy resources
twice from different threads.
We don't see a problem with set_regs function but it
won't be redundant to lock mutex in set_regs as well.
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: I7ec3984d25d0249061005533d13b22315b44ddf2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13687
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Other parts have changed these since readv and writev
support ext_opts.
And change corresponding unittest.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I79260a7e6110aa46df2016e579f1da5c241c9844
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13620
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This function processes and completes asynchronous write requests, so it
makes sense to rename it. This is done in preparation for handling
asychronous read requests.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I3f36631dc24a3170204aaaba56f4968be0672fe5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12172
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In the multi-process case, a process may call `spdk_nvme_ctrlr_free_io_qpair` on
a foreign I/O qpair (i.e. one that this process did not create) when that qpairs
process exits unexpectedly.
The variable `qpair->poll_group` isn't multi-process safe, we can't use it
in `spdk_nvme_ctrlr_free_io_qpair` and related transport poll group APIs.
Change-Id: Ic13a6a2c7d760477be5be5a56a45caa2b5518717
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13573
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
It will not find the h2c related reqs in the tailq now.
We can get it from tqpair->reqs directly.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: I25f0900e875b054d7617450477e9719e7a59aa18
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12861
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This follows similar logic in the pcie and tcp
completion paths, including omitting error
messages when aborting aers by adding a print_on_error
parameter to the completion function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id558d0af2cdd705dfb60abb842bd567a0949ccce
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13525
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
By default, the SPDK nvmf target reports vid==INTEL,
which results in the SPDK nvme driver trying to enable
Intel vendor-specific log page. Fix this by trying to
enable those log pages only for PCIE transport
controllers.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I78ebf365d4fa6295d1f610697266c3ead765988d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13524
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
We can only get to this code path if the controller
has vid==INTEL, so make that more clear by changing
the check to an assert.
Remove unit test that calls
nvme_ctrlr_construct_intel_support_log_page_list()
for a controller that is not VID==INTEL - this is
no longer valid.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3b58451bc95992bf641e7452f0ac4c2bac9fe31c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13523
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
This follows similar logic in the pcie completion
path, including omitting error messages when aborting
aers by adding a print_on_error parameter to the
completion function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I96df72280bb8fcbee3847fdc27f38e14a1bf3251
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13522
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
nvme_qpair_abort_all_queued_reqs() aborts error injections, queued
requests, aborting queued requests, and outstanding requests. (Aborting
outstanding requests depends on transports.) However, it did not abort
queued aborts.
Include nvme_ctrlr_abort_queued_aborts() into
nvme_qpair_abort_all_queued_reqs() to do really the name of the
function indicates.
nvme_ctrlr_abort_queued_aborts() has been called in a few cases, but
we do not care duplication.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I19102cc6603a72ce5c398a7947cb4d606b692991
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12849
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Vasuki Manikarnike <vasuki.manikarnike@hpe.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Fix issue: #2561
The issue here is that in the bdev_set_qd_sampling_period RPC
command, the QD sampling period has been set. Then later the
related Desc is closed and in the bdev_close() function the
QD sampling period is reset to 0.
A new QD desc is added as the QD sampling period update could
be handled properly.
Meanwhile, a new QD Poll In Progress flag is also added so as
to indicate there are ongoing events of QD sampling and the
Bdev unregister will be handled in the proper way.
Related test case and unit test also updated for this change.
Change-Id: Iac86c2c6447fe338c7480cf468897fc8f41f8741
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13016
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
The bdev_lvol_grow_lvstore will grow the lvstore size if the undering
bdev size is increased. It invokes spdk_bs_grow internally. The
spdk_bs_grow will extend the used_clusters bitmap. If there is no
enough space resereved for the used_clusters bitmap, the api will
fail. The reserved space was calculated according to the num_md_pages
at blobstore creating time.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: If6e8c0794dbe4eaa7042acf5031de58138ce7bca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9730
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reserve space for used_cluster bitmap. The reserved space is calculated
according to the num_md_pages. The reserved space would be used when
the blobstore is extended in the future.
Add the num_md_pages_per_cluster_ratio parameter to the
bdev_lvol_create_lvstore API. Then calculate the num_md_pages
according to the num_md_pages_per_cluster_ratio and bdev total size, then
pass the num_md_pages to the blobstore.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: I61a28a3c931227e0fd3e1ef6b145fc18a3657751
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9517
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In SPDK, declarations have the return type on the same line. Definitions
have the return type on a separate line. Astyle has an option for
enforcing this. Unfortunately, it seems to have two bugs:
1) It doesn't work correctly at all on C++ files.
2) It often fails on functions that return enums, or long type names
Deal with 1) by adjusting the check_format.sh script to only tell astyle
to fix return type line breaks for C files and not C++. Deal with 2) by
adding a few typedefs to work around the problem.
Change-Id: Idf28281466cab8411ce252d5f02ab384166790c6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13437
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
gcc 12 reports that strnlen() exceeds the bound set by maxlen argument.
This patch changes to strlen() to silence the following error:
lvol_ut.c: In function ‘lvs_load’:
lvol_ut.c:1086:56: error: ‘strnlen’ specified bound 64 exceeds source size 4 [-Werror=stringop-overread]
1086 | spdk_blob_set_xattr(super_blob, "name", "lvs", strnlen("lvs", SPDK_LVS_NAME_MAX) + 1);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I56caf5bbb06fa0ea2cc61a9eef145fc275a416b2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13413
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
It's useful to add these APIs.
spdk_copy_iovs_to_buf and spdk_copy_buf_to_iovs.
It prepares that other ones can call these.
We don't need to define them in static state
repeatedly.
And add corresponding unit tests.
Change-Id: Ife40fec8d047a48af67b04e6c055e4932282abfb
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12075
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Calculation of the ANA log page size should use the
identify ctrl MNAN field
(maximum number of allowed namespaces)
not the NN (maximum valid nsid value).
An ANA-enabled controller must have a non-zero MNAN value,
see NVMe Base Specification, Figure 251,
therefore nvme_ctrlr_init_ana_log_page() may safely use MNAN.
Since NN might be much higher than MNAN,
ANA log size based on NN may results in a very large
log page and cause a failure to get ANA log,
e.g. if it is larger than the controller's MDTS.
Fix: replace cdata->nn with cdata->mnan
in nvme_ctrlr_init_ana_log_page()
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Change-Id: I2a522dca833a27dddad25848d7688efa23d23091
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13039
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
DPDK CFLAGS get put into CFLAGS in mk/cc.flags.mk,
which for system package installed DPDK will include
extra paths like /usr/include/<arch-3-tuple>/dpdk.
If a Makefile adds its own CFLAGS before including
the .mk fragment that pulls in these CFLAGS, we won't
actually get those cc.flags.mk applied since they
are defined with ?=.
This may need to be revisited - using ?= for these
has evolved through several iterations of our SPDK
configured flag files - starting with commit
08ec96eb. But for now, let's just fix these few
Makefiles.
Fixes issue #2548.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9863db1b37b31907b4088f58cc13b81ed1bb8632
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12982
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Many open source projects have moved to using SPDX identifiers
to specify license information, reducing the amount of
boilerplate code in every source file. This patch replaces
the bulk of SPDK .c, .cpp and Makefiles with the BSD-3-Clause
identifier.
Almost all of these files share the exact same license text,
and this patch only modifies the files that contain the
most common license text. There can be slight variations
because the third clause contains company names - most say
"Intel Corporation", but there are instances for Nvidia,
Samsung, Eideticom and even "the copyright holder".
Used a bash script to automate replacement of the license text
with SPDX identifier which is checked into scripts/spdx.sh.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaa88ab5e92ea471691dc298cfe41ebfb5d169780
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12904
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: <qun.wan@intel.com>
There are a few places where a typo, extra character
or newline was added to the BSD 3-clause license text
which made it differ very slightly from the rest of
the license headers in the source tree. Remove those
differences in this patch, to help with automation of
SPDX identifier replacement in the next patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I542dc53cd252b1699253fd6dcc3ccac9643d7878
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12905
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In autorun.sh it executes autotest.sh as root. But in autotest.sh and
test/unit/unittest.sh, when run git clean -f'*.gcda', it may show errors like:
08:03:54 -- unit/unittest.sh@277 -- # cd /home/jenkins/spdk_repo/spdk
08:03:54 -- unit/unittest.sh@277 -- # git clean -f '*.gcda'
fatal: unsafe repository ('/home/jenkins/spdk_repo/spdk' is owned by someone else)
The reason is the spdk source folder owner may not be root but we run the git
clean command as root. Fix it by using the folder owner's id to do
the git clean operation.
Signed-off-by: Rui Chang <rui.chang@arm.com>
Change-Id: Ifbd3098d4c32ffef5dcca738625302f63572e0c6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12693
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This SGL type was missed in the original commit
that added the pretty printing.
Fixes: 4d9ab1e9a1 ("nvme: pretty print dptr")
Reported-by: Ramanjaneya Burugula <burugula@gmail.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibc655db4e65009071f39f55f691c94a094cea0bc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12705
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This patch adds virtio_blk abstraction for custom transports,
with the 'vhost_user_blk' first one being used.
Added spdk_virtio_blk_transport_ops describing the nessecary
callbacks to be implemented by each transport.
Please use SPDK_VIRTIO_BLK_TRANSPORT_REGISTER to register the transport.
Transports can use virtio_blk_process_request() to process the
incoming I/O from their queues.
virtio_blk_create_transport RPC was added to create one of the
registered transports, possibly with custom JSON arguments.
Added 'transport' argument to vhost_create_blk_controller RPC,
to specify which transport should create the controller.
By default the vhost_user_blk transport is used.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ic9d93a6e0f483796eb56b7174a678e41a6ea4808
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9540
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
As of right now the UT always used the empty struture of
struct spdk_vhost_dev_backend during the test. This meant
VHOST_BACKEND_BLK.
alloc_vdev() will require further changes to test both types
of backends. So for now change it to VHOST_BACKEND_SCSI,
since it currently does not touch any fields outside of the
struct spdk_vhost_dev.
Meanwhile next patch will do so for blk backend.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib5af7520bc8a21a7af03b810d4cc42726797a331
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12749
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Vhost library was not initialized as part of the test,
it will become necessary later in the series.
Suite startup/cleanup have no matching CUnit test case,
so only assert() can be used. Rather than CU_ASSERT().
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ieaa3d2f6b6f1899105362181f285f585ff9724d7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10945
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If compress driver doesn't support SGL input of output
then we need to copy user's buffers into reduce internal
buffers
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I0c07243a5b668d0e0adcc153e5b573f59c26ab64
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12281
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reduce library allocates one big chunk of memory and
then splits it between requests. The problem is that
a chunk of memory assigned to a request may cross huge
page boundary and if compress driver doesn't support
SGL input of output, operation will be failed.
To avoid this problem, align buffer start on 2MiB
and check each chunk of memory if it crosses huge page
boundary.
Fixes issue #2454
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ie730b8ba928f27a43bde1222b6c18d29b797575a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12249
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
ext_io_opts uses the size member to allow backwards
compatibility however currently we only check if it is
below or equal the current size of the opts struct and
that it is not 0. size is only used when we copy opts
because of split or push/pull.
This patch introduces size checks to allow safe access
to e.g. metadata and memory domain pointers of the user
provided opts pointer. The minimum size of the struct
passed is now the size of the initial version of
spdk_bdev_ext_io_opts. To not introduce additional
checks when opts are consumed by a bdev module we
now always copy if the size is smaller than the
current opts struct size.
When introducing new members to opts additional
checks might be needed if those are directly accessed
through the passed pointer or bdev_io->internal.ext_opts.
Change-Id: Ibd181a5840a3d5022018a9f61403df961ffd6e1d
Signed-off-by: Jonas Pfefferle <pepperjo@japf.ch>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12550
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
During ctrlr reconnection, spdk_nvme_ctrlr_reconnect_poll_async()
is executed by a non-timed poller.
We should poll adminq more often during ctrlr disconnection too.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ib1f5b41015aed20deda8df6f2c837981ac233c04
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12615
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
As described in the NVMe specification, a controller level reset
includes the following actions:
- the controller stops processing any outstanding admin or I/O
commands;
- all I/O SQs and CQs are deleted.
In a full controller reset sequence for a PCIe controller, if we do
a controller level reset first, we can abort outstanding commands
after the hardware has actually been stopped.
For NVMe-oF controller, each I/O qpair is an independent network
connection and is disconnected safely. We do not want to change
NVMe-oF controller.
Fixes the issue #2360
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: If05febac74705bfd3df5abd15064c1203126e027
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12447
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
As described in the previous patches, we need to delete all I/O
SQ/CQs before aborting trackers when disconnecting a controller.
The following patches reorder the operations. This patch changes
adminq disconnection to initiate a Controller Level Reset and
adminq completion processes it if ctrlr->is_disconnecting is true.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I64f06bae2ce8a9127124029fd042db0028198e3c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12560
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
When a new cluster is added to a thin provisioned blob,
md_page is allocated to update extents in base dev
This memory allocation reduces perfromance, it can
take 250usec - 1 msec on ARM platform.
Since we may have only 1 outstainding cluster
allocation per io_channel, we can preallcoate md_page
on each channel and remove dynamic memory allocation.
With this change blob_write_extent_page() expects
that md_page is given by the caller. Sicne this function
is also used during snapshot deletion, this patch also
updates this process. Now we allocate a single page
and reuse it for each extent in the snapshot.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I815a4c8c69bd38d8eff4f45c088e5d05215b9e57
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12129
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
To fix issue: #2484
When unregistering the bdev, will send out the message
to each thread to abort all the IOs including IOs from
nomem_io queue, need_buf_small queue and need_buf_large queue.
The new SPDK_BDEV_STATUS_UNREGISTERING state is newly
added to indicate this unregister operation.
In this case, the bdev unregister operation becomes the
async operation as each thread will be sent the message
to abort the IOs and as the last step, it will unregister
the required bdev and associted io device.
On the other hand, the queued_resets will be handled
separately and not aborted in the bdev unregister.
New unit test cases are also added:
enomem_multi_bdev_unregister: to abort the IO from
nomem_io queue during the unregister operation
bdev_open_ext_unregister: to handle the events and
async operations from the unregister operation
Change-Id: Ib1663c0f71ffe87144869cb3a684e18eb956046b
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12573
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
By default, failback to the preferred I/O path is done automatically
if it is restored. Some users may want to keep using the backup I/O
path even if the preferred I/O path is restored. In this case,
bdev_nvme_set_preferred_path can be used to do manual failback.
We may be able to clear/fill I/O path cache more strictly but it will
be complicated and have bugs. This patch does the minimal change,
just skips an apparent case.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I78fe5faee6ff04e88ae3d7c6be6da1c20637c912
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12431
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The new blobstore ext API is used when the user
provides ext_io_opts in bdev layer.
To store blobstore ext_io_opts, vbdev_lvol reports
non-zero get_ctx_size in bdev module interface.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I64076b5369533be0c1d69ca48aef9d70a9abe488
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11373
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
These function accept optional spdk_blob_ext_io_opts
structure. If this structure is provided by the user
then readv/writev_ext ops of base dev will be used
in data path
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I370dd43f8c56f5752f7a52d0780bcfe3e3ae2d9e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11371
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Introduce spdk_blob_ext_io_opts structure which
is used in the new *_ext functions.
Zeroes dev is updated with implementation of
readv_ext which uses memory domains memzero
or regular memset().
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Id94542196eff999827bf00591fd43804256fccb4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11369
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
In the following patches, nvme_ctrlr_process_init() will be used to
disable the controller when disconnecting the admin qpair for PCIe
transport. In this case, we will have to exit nvme_ctrlr_process_init()
after CSTS.RDY is 0. However, spdk_nvme_ctrlr_reset() and
spdk_nvme_ctrlr_reconnect_poll_async() have to continue
nvme_ctrlr_process_init() until the controller becomes ready.
To differentiate stop and continue clearly, add a new state
NVME_CTRLR_STATE_DISABLED to enum nvme_ctrlr_state.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ic0a5fb7114d4eeb1cefec28bc404184768fb0a96
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12613
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We enable multiple engines by:
* getting rid of the globals that point to the one available HW
and one available SW engine
* adding a submit_tasks() entry point for the SW engine so that
it is treated like any other engine allowing us to just call
submit_tasks() to the assigned engine for the opcode instead of
checking what is supported
* changing the definition of engine capabilities from
"HW accelerated" to simply "supported"
* during init, use a global (g_engines_opc) that contains engines
and is indexed by opcode so we know what the best engine is for each
op code
* future patches will add RPC's to override engine priorities or
specifically assign an opcode(s) to an engine.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I9b9f3d5a2e499124aa7ccf71f0da83c8ee3dd9f9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11870
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
The NVMe bdev module supported active-passive policy for multipath mode
first. By this patch, the NVMe bdev module supports active-active policy
for multipath node next. Following the Linux kernel native NVMe multipath,
the NVMe bdev module supports round robin algorithm for active-active
policy.
The multipath policy, active-passive or active-active, is managed per
nvme_bdev. The multipath policy is copied to all corresponding
nvme_bdev_channels.
Different from active-passive, active-active caches even non_optimized
path to provide load balance across multiple paths.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ie18b24db60d3da1ce2f83725b6cd3079f628f95b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12001
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
If we specify a preferred path manually for each NVMe bdev, we will
be able to realize a simple static load balancing and make the failover
more controllable in the multipath mode.
The idea is to move I/O path to the NVMe-oF controller to the head of
the list and then clear the I/O path cache for each NVMe bdev channel.
We can set the I/O path to the I/O path cache directly but it must be
conditional and make the code very complex. Hence, let find_io_path() do
that.
However, a NVMe bdev channel may be acquired after setting the preferred
path. To cover such case, sort the nvme_ns list of the NVMe bdev too.
This feature supports only multipath mode. The NVMe bdev module supports
failover mode too. However, to support the latter, the new RPC needs to
have trid as parameters and the code and the usage will be come very
complex. Add a note for such limitation.
To verify one by one exactly, add unit test.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ia51c74f530d6d7dc1f73d5b65f854967363e76b0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12262
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: <tanl12@chinatelecom.cn>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_bdev_get_acwu() is a 1-based number, so we need
to subtract 1 from it before assigning the value to
nsdata->nacwu.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I32708b28a35670cba6013a48b79389fa48226285
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12399
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When sending a fused compare and write command, we pass a callback
bdev_nvme_comparev_and_writev_done that we expect to be called twice
before marking the io as completed. In order to detect if a call to
bdev_nvme_comparev_and_writev_done is the first or the second one, we
currently rely on the opcode in cdw0. However, cdw0 may be set to 0,
especially when aborting the command. This may cause use-after-free
issues and this may call the user callbacks twice instead of once.
Use a bit in the nvme_bdev_io instead to keep track of the number of
calls to bdev_nvme_comparev_and_writev_done.
Signed-off-by: Alex Michon <amichon@kalrayinc.com>
Change-Id: I0474329e87648e44b08998d0552b2a9dd5d34ac2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12180
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds an extra spdk_thread_send_msg() call to destroy a qpair
to make sure that it isn't freed from the context of a socket write
callback. Otherwise, spdk_sock_close() won't abort pending requests,
causing their completions to be exected after the qpair is freed.
Fixes#2471
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ia510d5d754baccca1e444afdb10696ab9b58e28b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12332
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There is a race condition when a bdev is unregistered while reset is
submitted from the upper layer very frequently.
spdk_io_device_unregister() may fail because it is called while
spdk_for_each_channel() is processed.
spdk_io_device_unregister io_device bdev_Nvme0n1 (0x7f4be8053aa1)
has 1 for_each calls outstanding
To avoid this failure, defer calling spdk_io_device_unregister() until
reset completes if reset is in progress when unregistration is ready
to do, and then reset completion calls spdk_io_device_unregister()
later.
A bdev cannot be opened if it is already deleting. So we do not need
to hold mutex.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ida1681ba9f3096670ff62274b35bb3e4fd69398a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12222
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Previously, if a namespace is in ANA inaccessible state, I/O had been
queued infinitely. Fix this issue according to the NVMe spec.
Add a temporary poller anatt_timer and a flag ana_transition_timedout for
each nvme_ns.
Start anatt_timer if the nvme_ns enters ANA transition. If anatt_timer
is expired, set ana_transition_timedout to true. Cancel anatt_timer or
clear ana_transition_timedout if the nvme_ns exits ANA transition.
nvme_io_path_become_available() returns false if ana_transition_timedout
is true.
Add unit test case to verify these addition.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ic76933242046b3e8e553de88221b943ad097c91c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12194
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
This reduces a lot of casting.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ibc04f422858642d0e20c9b020bb6c5d1b70256fe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11534
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
The code to handle the lingering qpair when deleting it was really
complicated.
The RDMA transport can connect or disconnect qpair asynchronously.
Then we can include the code to handle the lingering qpair into the
code to disconnect qpair now.
If the disconnected qpair is still busy, defer completion of the
disconnection until qpair becomes idle.
If poll group is not used, we can complete disconnection immediately
because cq is already destroyed.
The related data and unit test cases are not necessary anymore.
So delete them in this patch.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ic8f81143fcad0714ac9b7db862313aa8094eeefb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11778
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add three states, INITIALIZING, EXITING, and EXITED to the rqpair
state.
Add async parameter to nvme_rdma_ctrlr_create_qpair() and set it
to opts->async_mode for I/O qpair and true for admin qpair.
Replace all nvme_rdma_process_event() calls by
nvme_rdma_process_event_start() calls.
nvme_rdma_ctrlr_connect_qpair() sets rqpair->state to INITIALIZING
when starting to process CM events.
nvme_rdma_ctrlr_connect_qpair_poll() calls
nvme_rdma_process_event_poll() with ctrlr->ctrlr_lock if qpair is
not admin qpair.
nvme_rdma_ctrlr_disconnect_qpair() returns if qpair->async is true
or qpair->poll_group is not NULL before polling CM events, or polls
CM events until completion otherwise. Add comments to clarify why
we do like this.
nvme_rdma_poll_group_process_completions() does not process submission
for any qpair which is still connecting.
Change-Id: Ie04c3408785124f2919eaaba7b2bd68f8da452c9
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11442
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_vhost_dev structure should only contain generic fields
that are to be used by either vhost, vhost_blk or vhost_scsi
layer.
The vhost_user backend can hold its properties in
spdk_vhost_user_dev, which is maintained within rte_vhost.
Both structures contain references back to each other.
The reference in spdk_vhost_dev is a void pointer to
allow future transports to keep the reference
to their own structures.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I68640c524426d885c20242146365ba242fa9df8e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11813
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
In support of upcoming patches and to greatly simplify things,
the capabilites enum which held bit positions for each opcode
has been removed. Only the opcodes enum remains and thus only
opcodes are used throughout. For the capabiltiies bitmap a helper
function is added to convert from opcode to bit position. Right
now it is used in the IO path but in upcoming patches that goes away
and the conversion is only done at init time.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ic4ad15b9f24ad3675a7bba4831f4e81de9b7bc70
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11949
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Patch for not running tests if ASAN and
Valgrind options are both enabled.
Fixes#2422
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: I50c91bede687f0aee571c1f2540530a7fafcb49c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11998
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Previously spdk_vhost_dev_backend held callbacks
for vhost_blk and vhost_scsi functionality, along
with ones that are called by the vhost_user backend.
This patch separates out those callbacks into two
structures:
- spdk_vhost_dev_backend - to be implemented by vhost_blk
and vhost_scsi
- spdk_vhost_user_dev_backend - is only implemented by
vhost_user backend, callbacks for session managment
specific to that transport
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I348090df5dddeb2b1945b082b85aec53d03c781b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11812
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
there is no group
The real implementation handles this by returning -ENOENT, so do the
same in the test.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I405b6f60bf4dcdb22c57e48bbaf66d57522a49c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11508
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Count disconnecting a queue pair as activity so that the unit test
poll_threads() calls don't bail out until the disconnectedd_qpair_cb is
called at least once.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Idc437d6c589dbf133bfcbb5edba1087f928a718c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11507
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
This was neither set nor used.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I3119135843c5fc0b8724e593db40df46e6b5bdb0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12097
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The concat module can combine multiple underlying bdevs to a single
bdev. It is a special raid level. You can add a new bdev to the end of
the concat bdev, then the concat bdev size is increased, and it won't
change the layout of the exist data. This is the major difference
between concat and raid0. If you add a new underling device to raid0,
the whole data layout will be changed. So the concat bdev is extentable.
Change-Id: Ibbeeaf0606ff79b595320c597a5605ab9e4e13c4
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11070
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To execute a callback function for each registered bdev or unclaimed
bdev, add new public APIs, spdk_for_each_bdev() and
spdk_for_each_bdev_leaf().
These functions are safe for race conditions by opening before and
closing after executing the provided callback function.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I59b702ffec7b4fc5e9779de5a3a75d44922b829b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12088
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use spdk_bdev_readv/writev_block_ext even when
there is no ext opts passed by bdev layer
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I0b9f17150cdba1a1023478bae745ab4438ea99bb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10070
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
That is a preparation for support of memory domains
in bdev_raid
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I3a6e01eccd4d7e4bc197dc5ffe268d42081d41de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11429
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
memory domains
If bdev doesn't support any memory domain then allocate
internal bounce buffer, pull data for write operation before
IO submission, push data to memory domain once IO completes
for read operation.
Update test tool, add simple pull/push functions
implementation.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ie9b94463e6a818bcd606fbb898fb0d6e0b5d5027
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10069
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Replace spdk_bdev_get_by_name() + spdk_bdev_unregister() by
spdk_bdev_unregister_by_name() wherever possible.
This simplifies the code and makes the code more reliable.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I91388c9d0b2e244cb745720a480803b03c42a226
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12066
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To unregister a bdev more correctly, we had to call
spdk_bdev_open_ext(), spdk_bdev_desc_get_bdev(), spdk_bdev_unregister(),
and then spdk_bdev_close(). This was correct but complicated.
Hence add a new public API spdk_bdev_unregister_by_name() which does
the whole correct sequence of bdev unregistration.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I9068d4ac49dca944436e0ba587308fd356dfef75
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12065
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The process of matching qpair to poll group is split into
two distinct parts that occur on different threads.
See spdk_nvmf_tgt_new_qpair().
This results in a race condition for TCP between spdk_sock_map_lookup()
and spdk_sock_map_insert(), which are called in spdk_nvmf_get_optimal_poll_group()
and spdk_nvmf_poll_group_add() respectively.
Fixes#2113
This patch picks a hint from nvmf_tcp for next poll group,
which is then passed down to spdk_sock_map_lookup().
When matching placement_id exists, but does not have
a poll group assigned - the hint will be used.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I4abde2bc9c39225c9f5dd7c3654fa2639bb0a27f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10271
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The rdma buffer for stripping DIF metadata is added. CPU strips the DIF
metadata and copies it to the rdma buffer, improving the rdma write
bandwith. The network bandwidth during 4KB random read test is increased
from 79 Gbps to 99 Gbps, the IOPS is increased from 2075K to 2637K.
Fixes issue #2418
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Change-Id: If1c31256f0390f31d396812fa33cd650bf52b336
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11861
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When iovs are copied from bounce or to bounce, the bounce is usually
alloced from data_buf_pool for better performance, and is multi iovs
instead of a single buffer. Therefore, block-aligned bounce are
supported.
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Change-Id: If56b21d9e46c73d4c956c227bec33ddd0ab9745b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11860
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
spdk_sock_map_insert() allows for allocating a sock_map
entry, without assigning any sock_group.
This is useful for cases where placement_id determined
by the component using spdk_sock_map_*. See PLACEMENT_MARK mode.
Placement_id's are allocated first, then an empty one is found
using spdk_sock_map_find_free().
Since the above is a valid use case, then entry in sock_map
can exist without a group assigned. spdk_sock_map_lookup() has
to handle such cases, rather than trigger an assert.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia717c38fef5e71fe44471ea12f61a5548463f0cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10725
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: wanghailiang <hailiangx.e.wang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The usage of internal API for sock_map was not unit tested,
so far.
This patch adds first set of UT for the sock_map,
expanding it and fixing some issues later in the series.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Idfce8e19668a87f1d45d73310edb17d71d9f8bd8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10724
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
As we now only support a single WQ, there's no need for a teble of
them and no need to assert that the stride from WQ to WQ is the
same as the WQ struct size.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I205f36aae22070f532653726dd75249bbafbe3ef
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12081
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
First in a series of patches that will enable multiple engines
to exist at once and choose the best one based on their priorities
and capabilites, the public API will no longer be needed.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia87b83aa2263745a94a822a160b6e97bb2e0dc19
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11948
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
With recent changes libreduce should provide correct buffers
if the driver doesn't support SGL in/out. This patch verifies
that we don't use SGLs when they are not supported.
Since even a single buffer can be split on 2MB page
boundary, it is not enough just to check iovs count.
Added asserts that the first elements of mbufs are
not null to avoid scan build errors
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I620e43bf5b1abd25cab412fe08346a6d767c9be9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11973
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
rte_pktmbuf_free frees the given mbuf and any chained mbufs.
It can cause double free of some mbuf if we free every mbuf
in a loop. Instead use rte_pktmbuf_free_bulk which correctly release
chained mbufs.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I55fd7832ff656f519a4ed2f02de8ef1a0f637a02
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11972
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In the compression operation we may have SGL input
if user's buffer is fragmented or less than chunk_size.
If the backing device doesn't support SGL input then
we should copy user's buffers into decomp_buffer
(including paddings if any).
In the decompression operation, if the backing device
doesn't support SGL output, we use a single output buffer
which is pointing to decomp_buffer. Once the operation
completes, we should copy the result into user's buffers.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ic7fddd38374bb6898256633eacd192dbaf36541a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11970
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The driver always creates a single group containing all of the engines
and a single work queue.
Change-Id: I83f170f966abbd141304c49bd75ffe4608f5ad03
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11533
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
It is not used for anything.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I1d967b2d0e404756f7ceda98ddc4ee9017ec83f7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11489
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
It turns out that this can stay on the stack.
Change-Id: I961366307dae5ec7413a86271cd1dfb370b8f9f3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11488
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
These aren't ever accessed in the main I/O path, so we can read them in
whenever we need them and make the code a lot simpler.
Change-Id: Icfdbfe9f2d9db13f4d0d28b2b4103cd0c443bcf4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11485
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This is no longer needed.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I08c788ca0451e739804b568d613c1e52e071c61f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11794
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Fill is sent in as a uint8, we need to populate the full uint64
input with the uint8 pattern or we'll get a miscompare. This is
how idxd was doing it, instead of adding the same code to ioat just
move it up a layer.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia4aab1c6230f35ab88bb8a0e3b8e16dbd93007c7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11947
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
- Fixed duplication of key, key2, drv_name, cipher, etc., fields in
struct bdev_names and struct vbdev_crypto. Moved all of them into
the new struct vbdev_crypto_opts, which is re-used by both structs.
This aslo removes duplication in error handling and fininalization
logic that checks the keys are zeroed out and properly freed.
- Moved unhexlify into vbdev rpc code. All keys passed to vbdev
already in the binary form.
- Provide meaningful error messages in the rpc response on keys
validation issues during setup of crypto vbdev.
- Updated unit tests.
Signed-off-by: Yuriy Umanets <yumanets@nvidia.com>
Change-Id: I1fab8771bbbc0cd2f359f0d105fec28fb86893b3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11631
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
That is done to correctly handle metadata pointer which is part
of ext_opts structure. It will also be used by the next patch to
remove memory_domain pointer if request which uses local buffers
is split
Force the user to set correct ext_opts size, update API functions
description.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I77517d70df34a998d718cc6474fb4c538a42918f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11349
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Bdev modules must not access internal bdev_io
structure, so add a new pointer in a public
section. Pointer in internal section will be
used in next patch
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ib631563015b3e5fa9300d22b7ae59d8db43c8275
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10421
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is a preparation for enabling of memory domains
pull/psuh functionality. Since memory domains API is
asynchronous, this patch makes asynchronous operations
with bounce buffers.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ieb1f2a0c151149af58cfd7607dbde4c76c3c288d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10420
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
SPDK has settled on what the optimal DSA configuration is, so let's
always use it.
Change-Id: I24b9b717709d553789285198b1aa391f4d7f0445
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11532
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
The names on these were changed.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ib75a60342c08f72dad39635a9244421c1cca5485
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11793
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add a new flag is_disconnecting to struct spdk_nvme_ctrlr.
Separate calling nvme_ctrlr_disconnect() and nvme_ctrlr_disconnect_done()
by using the flag is_disconnecting.
Additionally, change nvme_ctrlr_fail() to skip setting ctrlr->is_failed
to true if ctrlr->is_disconnecting is true.
Change-Id: Ie2c74ba41f120662a30f6198751d07005d23abcf
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11000
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is a preparation to make nvme_transport_ctrlr_disconnect_qpair()
asynchronous.
For nvme_transport_ctrlr_disconnect_qpair(), factor out operations after
returning from transport's specific ctrlr_disconnect_qpair() into a helper
function nvme_transport_ctrlr_disconnect_qpair_done().
Then move nvme_transport_ctrlr_disconnect_qpair_done() into the end of
the transport specific ctrlr_disconnect_qpair().
Additionally remove the operation to overwrite the qpair state to
DISCONNECTED from nvme_transport_connect_qpair_fail() because
this is duplicated and nvme_transport_ctrlr_disconnect_qpair() is responsible
to make the qpair disconnected even after it completes asynchronously.
Change-Id: I9c8faa7039d306d3e31a8f51826755ce8840a8aa
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10851
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
For RDMA transport, adminq will find transport error first because
usually only adminq polls CM events.
Change-Id: I7b22cc8883bf02198f1a90d2654c1de6f2e736e6
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11331
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If qpair is disconnected asynchronously, it takes time from detecting
transport error to actually disconnected. We should avoid using the
path as soon as possible after detecting any transport error.
Poll group clears I/O path cache if it finds transport error and avoid
using the path which had transport error.
These changes will reduce the failover time.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I00580159a84372a115ed5e62a6ce13eed4368999
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11329
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_nvme_ctrlr_disconnect() will be made asynchronous in the
following patches and so we will need to have some changes.
spdk_nvme_ctrlr_disconnect() disconnects adminq and ctrlr synchronously
now.
If spdk_nvme_ctrlr_disconnect() is made asynchronous,
spdk_nvme_ctrlr_process_admin_completions() will complete to disconnect
adminq and ctrlr, and will return -ENXIO only if adminq is disconnected.
However even now spdk_nvme_ctrlr_process_admin_completions() returns
-ENXIO if adminq is disconnected.
So as a preparation, set a callback before calling spdk_nvme_ctrlr_disconnect()
and call the callback if it is set and spdk_nvme_ctrlr_process_admin_completions()
returns -ENXIO.
Besides, fix the return value of bdev_nvme_poll_adminq() in this patch.
Change-Id: I2559f86bb8cf9a92b5b386ed816c00b08c9832df
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10950
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
As we do when deleting ctrlr_channel, disconnect and then free I/O
qpair in a ctrlr reset sequence.
Deleting ctrlr_channel and resetting ctrlr_channel may cause conflicts.
This patch processes such conflicts correctly.
If destroy_ctrlr_channel_cb() is executed between pending and executing
reset_destroy_qpair(), reset_destroy_qpair() is not executed because
ctrlr_channel is not found. In this case, destroy_qpair_channel()
starts disconnecting qpair and deletes ctrlr_channel. Then
disconnected_qpair_cb() releases a reference to poll group.
If destroy_ctrlr_channel_cb() is excuted between executing reset_destroy_qpair()
and disconnected_qpair_cb(), destroy_ctrlr_channel_cb() skips
ctrlr_channel for a reset sequence.
Change-Id: I1f49f74b94aefbea178680aa53ded3a12876c676
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10766
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
At the moment MLX5 uses different number of qp descriptors than the
other pmd crypto drivers. Adding it to vbdev_crypto on init and re-use
everywhere we need it.
Signed-off-by: Yuriy Umanets <yumanets@nvidia.com>
Change-Id: Iea4d4787fc5fd91f27c4a70cf78c5660f09bc854
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11878
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Since IV length is the same for all pmd crypto drivers,
AES_CBC_IV_LENGTH is renamed to IV_LENGTH.
Signed-off-by: Yuriy Umanets <yumanets@nvidia.com>
Change-Id: If8769db119eb599a17c267e8950f18f5a0ea995b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11875
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
spdk_nvme_poll_group has followed spdk_nvme_qpair about how to
process I/O qpair deletion inside of a completion context.
spdk_nvme_qpair_process_completions() accesses qpair after
returning from nvme_transport_qpair_process_completions().
So this is reasonable.
On the other hand, if spdk_nvme_poll_group_process_completions()
can execute spdk_nvme_ctrlr_free_io_qpair() inside of a completion
context, the target qpair is ensured to be deleted after returning
from spdk_nvme_ctrlr_free_io_qpair(). Then the target qpair is
not accessed anymore in spdk_nvme_poll_group_process_completions().
Remove two variables, in_completion_context and num_qpairs_to_delete,
of spdk_nvme_transport_poll_group and the related code.
This change is really necessary to support the following case.
In the NVMe bdev module, a nvme_qpair has a qpair and a poll_group
channel. disconnected_qpair_cb calls spdk_nvme_ctrlr_free_io_qpair()
for the qpair and spdk_put_io_channel() to the poll_group_channel.
spdk_nvme_ctrlr_free_io_qpair() is executed after unwinding stack
but spdk_put_io_channel() is executed now. The callback to
spdk_put_io_channel() calls spdk_nvme_poll_group_destroy(). However,
spdk_nvme_ctrlr_free_io_qpair() is not executed. Hence
spdk_nvme_poll_group_destroy() fails.
Update the corresponding stub in unit test together.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Icd1f1daf049c6c7ffb28790fe87989a1060f8952
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11496
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is another preparation to disconnect qpair asynchronously.
Add nvme_qpair object and move the qpair and poll_group pointers and
the io_path_list list from nvme_ctrlr_channel to nvme_qpair. nvme_qpair
is allocated dynamically when creating nvme_ctrlr_channel, and
nvme_ctrlr_channel points to nvme_qpair.
We want to keep the times of references at I/O path. Change nvme_io_path
to point nvme_qpair instead of nvme_ctrlr_channel, and add
nvme_ctrlr_channel pointer to nvme_qpair.
nvme_ctrlr_channel may be freed earlier than nvme_qpair. nvme_poll_group
lists nvme_qpair instead of nvme_ctrlr_channel and nvme_qpair has a
pointer to nvme_ctrlr.
By using the nvme_ctrlr pointer of the nvme_qpair, a helper function
nvme_ctrlr_channel_get_ctrlr() is not necessary any more. Remove it.
Change-Id: Ib3f579d3441f31b9db7d3844ec56c49e2bb53a5d
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11832
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In the following patches, spdk_nvme_ctrlr_disconnect_io_qpair() will
be changed to be asynchronous, spdk_nvme_ctrlr_disconnect_io_qpair()
will be called first and then spdk_nvme_ctrlr_free_io_qpair() after
the qpair is actually disconnected.
We will not be able to keep the current bdev_nvme_destroy_qpair()
function.
As a preparation, inline bdev_nvme_destroy_qpair() and remove it.
Additionally, this patch has the following changes.
Previously I/O qpair was freed and then I/O path caches were cleared.
Both are SPDK thread local. So there is no dependency for the ordering
of these two operations. However, it will reduce the size of the
following patches if we clear I/O path caches before freeing I/O qpair
when the qpair is disconnected. Hence we clear I/O path caches and then
free I/O qpair.
Remove DTRACE for bdev_nvme_destroy_qpair() for now.
It will be restored in the following patches.
Furthermore, fix potential NULL pointer acces in
bdev_nvme_create_qpair().
Change-Id: I0ab78ccb0d240e56b95b53179341afcd909a31f6
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10746
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In test_nvme_free_request, there is valgrind error:
Conditional jump or move depends on uninitialised value(s)
Signed-off-by: Rui Chang <rui.chang@arm.com>
Change-Id: I80f741cac9316d86b060419e3b6fb651fa018aa4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11826
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If 0 - UINT32_MAX or UINT32_MAX - 0 is substituted into a int variable,
we cannot get any expected result.
Fix the bug and add unit test case to verify the fix.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Iad2ea681ad8ad234e70c7310b58785a999612156
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11837
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
The following patches will enable us to specify I/O error resiliency
options per nvme_ctrlr as global options. To do it easier, move
per controller options about I/O error resiliency into struct nvme_ctrlr_opts.
prchk_flags is not exactly for resiliency but move it into struct
nvme_ctrlr_opts too.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I85fd1738bb6e293cd804b086ade82274485f213d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11829
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If 0 - UINT32_MAX or UINT32_MAX - 0 is substituted into a int variable,
we cannot get any expected result.
Fix the bug and add unit test case to verify the fix.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ib045273238753e16755328805b38569909c8b83a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11836
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
The spdk_msg_mempool structure has a fixed size, which is not flexible
enough. The size of the memory allocation can now be changed in the
options given to the spdk_app_start function.
Signed-off-by: Alexis Lescouet <alexis.lescouet@nutanix.com>
Change-Id: I1d6524ab8cf23f69f553aedb0f5b0cdc9dde374b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11635
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We will use nvmf library CSTS.CFS instead so that the client can
get this error status.
Change-Id: I42c248a7333d1f9c940bb29135c887a61c906bd4
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11676
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Plumbing for flags was added in prior pathces. This patch
introduces and respects the relevant flags for use with PMEM
aka durable memory through the accel_fw, IDXD, IOAT and SW
modules.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I792f31459e061d220965feced60e0c236d819a68
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9455
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is just plumbing the flags param. Use of it for PMEM
will come in upcoming patches.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I620df072aaad3f8062a0312bbea3da1bc3f911b9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9281
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
- Continue init of the other crypto devices (mlx5) after failure of
rte_vdev_init(AESNI_MB) in vbdev_crypto_init_crypto_drivers(). It
simply may not be enabled in DPDK because it requires IPSec_MB>=1.0
installed in the system. Reproduces with --with-dpdk=dpdk/install
option used, when the target DPDK is built without control of IPSec
version from the SPDK side.
- Updated crypto_ut to test the new behavior of error handling from
rte_vdev_init(AESNI_MB) in vbdev_crypto_init_crypto_drivers().
Signed-off-by: Yuriy Umanets <yumanets@nvidia.com>
Change-Id: Icd4db8877afe87db8166c40d6e7b414cd43c9c25
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11624
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
- Switched to using rte_mempool for mbufs instead of spdk_mempool. This
allows using rte pkt_mbuf API that properly handles mbuf fields we need
for mlx5 and we don't have to do it manually when sending crypto ops.
- Using rte_mempool *g_mbuf_mp in vbdev crypto ut and added the mocking
API code.
- crypto_ut update to follow pkt_mbuf API rules.
Signed-off-by: Yuriy Umanets <yumanets@nvidia.com>
Change-Id: Ia5576c672ac2eebb260bfdbb528ddb9edcd8f036
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11623
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This reverts commit 3bacd6653d.
Change-Id: I8dbaffc9f50cf9627720667644496cdaf4e81c3f
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11723
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
According to NVMe over Fabrics spec number of SGLs supported by the
controller is reported in MSDBD. But it is also implicitly limited by
command capsule size (IOCCSZ) since SGL are passed in capsule.
This patch adjusts max_sges to capsule size if required. Adjustment to
MSDBD is also moved to transport layer because it is fabrics specific
parameter and is not valid for PCIe transport.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I44918eb949345c61242ca50a524d21d04b6ac058
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11669
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For the benefit of forthcoming vfio-user changes, register the poll
group poller prior to calling the transport create callback, and pass in
a pointer to the poll group itself.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Idbc24126c9d46f8162e4ded07c5a0ecf074fc7dd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10718
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
With async connect, we need to avoid the case
where the initiator is sending the icreq, and
meanwhile the application submits enough I/O
such that the request objects are exhausted, leaving
none for the FABRICS/CONNECT command that we need
to send after the icreq is done.
So allocate an extra request, and then use it
when sending the FABRICS/CONNECT command, rather
than trying to pull one from the qpair's STAILQ.
Fixes issue #2371.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If42a3fbb3fd9d863ee48cf5cae75a9ba1754c349
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11515
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This has changed to control the number of read buffers allocated to the
group, but it is only valid to set this register if the device has
indicated it supports it. Further, the default value is what we want
anyway, so we can skip setting it altogether.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ic54672ea6cb16acc7613860e36d9f7033048bd98
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11484
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
All of the other structs and unions spell out register, so match the
style.
Change-Id: Ie502e80206305037d1518a1db590d89b7479abb4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11433
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
SPDK can submit more commands to remote NVMf target than allowed by
negotiated queue size. SPDK submits up to SQSIZE commands, but only
SQSIZE-1 are allowed.
Here is a relevant quote from NVMe over Fabrics rev.1.1a ch.2.4.1
“Submission Queue Flow Control Negotiation”:
If SQ flow control is disabled, then the host should limit the number
of outstanding commands for a queue pair to be less than the size of
the Submission Queue. If the controller detects that the number of
outstanding commands for a queue pair is greater than or equal to the
size of the Submission Queue, then the controller shall:
a) stop processing commands and set the Controller Fatal
Status (CSTS.CFS) bit to ‘1’ (refer to section 10.5 in the NVMe Base
specification); and
b) terminate the NVMe Transport connection and end the association
between the host and the controller.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: Ifbcf5d51911fc4ddcea1f7cde3135571648606f3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11413
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
According to NVMe over Fabrics specification (rev.1.1a) HSQSIZE sent
in RDMA_CM_REQUEST private data (ch.7.3.6.4) shall be the same as
SQSIZE later sent in Connect command (ch.3.3).
SPDK NVMe RDMA initiator adjusts SQSIZE to CRQSIZE received from
target in RDMA_CM_ACCEPT private data. Target is allowed to send
CRQSIZE < HSQSIZE if RNR retries are used. So, it is possible that
SQSIZE sent by SPDK will be lower than previously sent HSQSIZE. There
are targets validating this match and they reject connection from
SPDK.
Linux kernel NVMe initiator doesn't perform such adjustments and
connects well to such targets.
This patch aligns SPDK behavior with specification and Linux kernel
implementation.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I01968d1c07d284396fa5939932d85841351d7a45
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11350
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There are errors occur that uninitialised value created by a stack allocation when running unittest_accel and unittest_nvme_rdma with valgrind.
Change-Id: I4b48b472cc7c189cbcaf8ca772830a23118e7e17
Signed-off-by: Jaylyn Ren <jaylyn.ren@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10559
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
it shall be executed on ctrlr's thread not subsystem's
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I58c60525191085d3d6a583862ba5d71ea90940c7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11105
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In many cases, addressing bdevs by their UUIDs is often easier than
using their names, which can be somewhat arbitrary. For instance, the
NVMe bdev builds a name by addng the n{NSID} suffix to the controller's
name, while the UUID is filled with NGUID (if available).
The UUID alias is stored in the form defined by RFC 4122, meaning five
groups of lower-case hexadecimal characters. It's important to note
that bdev layer uses case-sensitive name comparison, so the user needs
to use the same textual UUID representation.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I8b112fb81f29e952459d5f81d97fdc7a591730f8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11395
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
bdev_multi_allocation tries to write four characters, an integer between
0 and INT_MAX, and a nul byte into 10 characters. That requires at least
15 characters.
This leads to build failures with "make CONFIG_DEBUG=n CONFIG_UBSAN=y".
Change-Id: I8cb9fd4ede31ae24809e4a04fd60a67dae3a0ac4
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11261
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
An spdk_bs_opts structure is sometimes partially initialized due to
using sizeof(opts) (struct spdk_blob_opts, 64 bytes) rather than
sizeof(bs_opts) (struct spdk_bs_opts, 72 bytes).
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Iaaa89bb419f66969d0888f49f8991c35b3dc5ea4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11268
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
While not documented as such, spdk_bdev_module_claim_bdev() has always
allowed a bdev that is opened read-only to remain read-only when
claimed. This occurs when NULL is passed in place of an spdk_bdev_desc.
This change updates the function's documentation to match the
implementation and adds a unit test to ensure the current behavior
remains.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Ief26de60e4408bfe1aa60b7a4e1d8adf273470b6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11267
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
When an unexpected xattr name is passed to lvol_get_xattr_value(), no
error is returned to the caller. The one caller, blob_set_xattrs() via
the xattrs->get_value callback, makes the reasonable assumption that a
lookup that fails to find a value returns a NULL value. This updates
lvol_get_xattr_value() to match that expectation.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I5c7a740f2757e6d8265ba2637afecb729acfcdd4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11326
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
VFIO in QEMU uses region 9 as the PCI passthrough devices' migration channel.
The format of the region 9 migration region is as follows:
------------------------------------------------------------------
|vfio_device_migration_info| data section |
------------------------------------------------------------------
QEMU will access vfio_device_migration_info to controll the migration
process.
For SPDK vfio-user target, we also implement the BAR9 via libvfio-user,
and we also define the NVMe device specific migration data stored in
data section of BAR9. QEMU doesn't care about the format in data section,
it will help us to gather the NVMe specific migration data in source VM and
then restore the migration date to data section of BAR9 in destination VM.
The core idea to implement live migration will following the device state
change which is controlled by QEMU. First QEMU will try to STOP the device
in the source VM, and set the destination VM to RESUME state, SPDK will save
NVMe devic state data structure to BAR9 in the source VM once the subsystem
is paused, then QEMU will read BAR9 in source VM and restore the content of
BAR9 in destination VM, finally in the destination VM, we will restore the
NVMe device state include BARs/PCI CFG/queue pairs in the destination VM.
Change-Id: I42e38f28c3ff59831be63290038b50d199d06658
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7617
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch aligns namespace comparison with Linux kernel
implementation:
- UUID is optional and may be NULL
- command set (CSI) should be the same
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I8f889989f24cd51b104057217f87eb303b30fa68
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11312
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
For correct behaviour, pthread_mutex must be initialized before use
and destroyed afterwards. An already initialized mutex should not
be re-initialized.
Add calls to nvme_ctrlr_construct where nvme_ctrlr_destruct is
called without a matching construct.
Add missing calls to mutex_init and mutex_destroy as required.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: I9753fa7fbd77402f23a08a66f4b489a5c229487a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11298
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
This reverts commit eb09178a59.
Reason for revert:
This caused a degradation for adminq.
For adminq, ctrlr_delete_io_qpair() is not called until ctrlr is destructed.
So necessary delete operations are not done for adminq.
Reverting the patch is practical for now.
Change-Id: Ib55ff81dfe97ee1e2c83876912e851c61f20e354
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10878
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Found via inspection during spec review of latest HW. We were using the
wrong stride for the WQCFG regsiter when configuring but it just so
happened to be the right value for the current DSA version. We were
mixing up the size of the WQCFG register with the stride value used to
configure the next WQCFG regsiter as they are not contiguous in HW, we
need to read another capabilities bit to determine the address of the
next wqcfg to configure..
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I14d1ff95e0131fd30121aa955bfbc8c8fb3fc512
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10968
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Compliant with both current and next gen DSA.
Note: some fields in gencap were mapped incorrectly
previously, but this did not impact the SPDK driver
because the only times those values (max_xfer_shift
and max_batch_shift) were used were in asserts.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I9648184670f661166136e7898d0d8c7e07d8c746
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10966
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Creation of sockets is specific to rte_vhost, so it
functionality responsible for setting path for them.
dev_dirname is renamed to g_vhost_user_dev_dirname
and its definition is moved to rte_vhost_user.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I9bae67667b0f6624f2daf3244a048d10e94e553c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10631
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
vhost.c contains a lot of functionality that
is rte_vhost specific. This series is moving
rte_vhost specific functionality to rte_vhost_user.c.
UT for vhost didn't make a distinction for either.
So starting with this patch the rte_vhost_user.c
is now included in the UT, only stubing out rte_vhost functions.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I0d5f62ad47d1261bbb44c0aa23400d94ece4564e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10743
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
From SAM-4, section 5.13 (Sense Data);
“When a command terminates with a CHECK CONDITION status, sense data shall be returned
in the same I_T_L_Q nexus transaction (see 3.1.50) as the CHECK CONDITION status. After
the sense data is returned, it shall be cleared except when it is associated with a unit
attention condition and the UA_INTLCK_CTRL field in the Control mode page (see SPC-4)
contains 10b or 11b.”
SPDK does not set UA_INTLCK_CTRL to 10b or 11b, so we set the unit attention condition
immediately against a single IO or Admin IO after reporting it via a CHECK CONDITION.
Once the failed IO received at iSCSI initiator side, it will be retried. In the case of
resize operation, if there is no IO from iSCSI initiator side, the unit attention
condition will be delayed to report until the first IO is received at the iSCSI target
side.
Meanwhile, we clear the resizing (newly added) flag on our SCSI LUN structure after
first time we report the resize unit attention condition.
The kernel initiator won’t actually resize the corresponding block device automatically.
It will report a uevent, and then you can set up udev rules to trigger a rescan. SPDK
iSCSI initiator will automatically report the LUN size change.
Change-Id: Ifc85b8d4d3fbea13e76fb5d1faf1ac6c8f662e6c
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11086
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Increase the batch size and with it the effective queue depth per
channel to 512.
Change-Id: Ide665e92d47ee753c141f34dd6a8bc4d040fe8db
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11031
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
libvfio-user will call quiesce callback when there are
memory region add/remove and device state change requests
from client, and in the quiesce callback, we will pause
the subsystem so that it's safe to do everything after
it, then after quiesce callback, we will resume the
subsystem. The quiesce callback is also used in
live migration, each device state change will quiesce
the device first.
Change-Id: I3a6a0320ad76c6b2d1d65c754b9f79cce5c9c683
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10620
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Admin commands can be sent and polled from any thread, which also means
that the error injection queue on the admin qpair can be accessed from
multiple threads. Therefore, any modifications to that queue should be
done under the ctrlr lock.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib1ed194405cb5b93f65a007b9749fd4433dc367d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11099
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
There is an error case that the block device didn't complete
outstanding IOs during the controller reset or shutdown, so
the NVMf library will wait until all the IOs returned from
the backend, however, so here we added a timeout timer, when
the time expired, we will try to reset the block device which
hold the outstanding IOs.
Fix#2194.
Change-Id: I8d0746335e1f20a09e6a9ea87730551808a898d1
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9909
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Fix warning: missing braces around initializer
This issue is seen with gcc (GCC) 4.8.5 20150623.
Warning like below:
nvme_tcp_ut.c:243:9: warning: (near initialization for ‘ctrlr.ns’) [-Wmissing-braces]
nvme_tcp_ut.c: In function ‘test_nvme_tcp_req_init’:
nvme_tcp_ut.c:525:9: warning: missing braces around initializer [-Wmissing-braces]
struct spdk_nvme_ctrlr ctrlr = {0};
^
nvme_tcp_ut.c:525:9: warning: (near initialization for ‘ctrlr.ns’) [-Wmissing-braces]
And more information from below link:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=53119
Change-Id: I88b5b3908d5d0daa9383e47a1ed53288f342ca3b
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11137
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
This is the same effort as the last patch.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I94ef08abdbb2bd2e07d0cd1e552c5d05c805233e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10817
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
More precise stubs for spdk_nvme_poll_group are critically important
to verify upcoming changes.
Add a flag is_failed to struct spdk_nvme_qpair separately from
is_connected. This is used to inject error to a connection.
Replace a single list qpairs by two lists, connected_qpairs and
disconnected_qpairs for struct spdk_nvme_poll_group.
Then utilize these to manage qpair in poll group.
spdk_nvme_ctrlr_reconnect_io_qpair() is not used in the NVMe bdev
module now. Remove the corresponding stub.
Adjust polling count accordingly.
Change-Id: I4d867c56ae518276813f6f96d23a5f6933364fd4
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10816
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
nvme_poll_group_disconnect_qpair() is called only by a single place now.
We do not need the flag poll_group_disconnect_in_progress any more.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I8f9c0f14baa8fcb9b0637635a5bb3d34a8b11af5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10673
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
nvme_ctrlr_disconnect_qpair() calls nvme_poll_group_disconnect_qpair() if the qpair
uses a poll group, and nvme_poll_group_disconnect_qpair() calls
nvme_ctrlr_disconnect_qpair() if the state of the qpair is not DISCONNECTING.
This relationship made the code very complex.
A few patches starting from this patch simplifies disconnect and free qpair
operations.
This patch swaps the ordering of nvme_ctrlr_disconnect_qpair() and
spdk_nvme_poll_group_remove() in spdk_nvme_ctrlr_free_io_qpair().
This ensures the qpair is disconnected when spdk_nvme_ctrlr_free_io_qpair()
calls spdk_nvme_poll_group_remove().
This enables us to limit spdk_nvme_poll_group_remove() to be available
only for disconnected qpairs.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I0601a74f953a2efc4f177a51a4450baea33533d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10670
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If ctrlr_loss_timeout_sec is set to -1, reconnect is tried repeatedly
indefinitely, and I/Os continue to be queued.
This patch adds another option fast_io_fail_timeout_sec, a flag
fast_io_fail_timedout to nvme_ctrlr.
If the time fast_io_fail_timeout_sec passed after starting reset,
set fast_io_fail_timedout to true not to use the path for I/O submission.
fast_io_fail_timeout_sec is initialized to zero as same as
ctrlr_loss_timeout_sec and reconnect_delay_sec.
The name of the parameter follows the famous DM-multipath, its fast_io_fail_tmo.
Change-Id: Ib870cf8e2fd29300c47f1df69617776f4e67bd8c
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10301
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously reconnect retry was not controlled and was repeated indefinitely.
This patch adds two options, ctrlr_loss_timeout_sec and reconnect_delay_sec,
to nvme_ctrlr and add reset_start_tsc, reconnect_is_delayed, and
reconnect_delay_timer to nvme_ctrlr to control reconnect retry.
Both of ctrlr_loss_timeout_sec and reconnect_delay_sec are initialized to
zero. This means reconnect is not throttled as we did before this patch.
A few more changes are added.
Change nvme_io_path_is_failed() to return false if reset is throttled
even if nvme_ctrlr is reseting or is to be reconnected.
spdk_nvme_ctrlr_reconnect_poll_async() may continue returning -EAGAIN
infinitely. To check out such exceptional case, use ctrlr_loss_timeout_sec.
Not only ctrlr reset but also non-multipath ctrlr failover is controlled.
So we need to include path failover into ctrlr reconnect.
When the active path is removed and switched to one of the alternative paths,
if ctrlr reconnect is scheduled, connecting to the alternative path is left
to the scheduled reconnect.
If reset or reconnect ctrlr is failed and the retry is scheduled,
switch the active path to one of alternative paths.
Restore unit test cases removed in the previous patches.
Change-Id: Idec636c4eced39eb47ff4ef6fde72d6fd9fe4f85
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10128
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
We noticed the difference between the SPDK 21.10 and the latest master
in a test.
The simplified scenario is as follows:
1. Start SPDK NVMe-oF target
2. Run bdevperf for the target with -f parameter to suppress exit
on failure.
3. Kill the target after I/O started.
With the SPDK 21.10, bdevperf retries failed I/Os and exits after
the test time is over.
With the latest SPDK master, bdevperf hungs and does not exit even
after the test time is over.
The cause was as follows:
reset ctrlr is repeated very quickly (once per 10ms by default) and hence
I/Os were queued infinitely because nvme_io_path_is_failed() returned
false if nvme_ctrlr is resetting.
We should queue I/O when nvme_ctrlr is resetting only if reset is throttoled
and fail-fast for the repeated failures is supported.
Hence in this patch, fix the degradation and remove the related unit
test cases.
Reported-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I4047d42dc44488a05264c6a841d101a7c371358b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11062
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Adding metadata support for io commands. Currently metadata is ignored
even if present in the cmd struct. Making metadata adress
readable/writable depending on data transfer bits. Adding extra unit
test to make sure metadata fields are populated.
Signed-off-by: Ahriben Gonzalez <ahribeng@gmail.com>
Change-Id: I1d01974a6b2831c82b43e94073065d235eea429a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10854
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We only populate active namespaces into the main namespace tree, so we
don't need a separate list of active namespaces too.
Change-Id: Iaf194f806cc1d9672f5567cff3dffafff3165069
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10034
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Since this is now sparsely populated, a tree is a better choice.
Change-Id: Ie66d913fa1d298de56a7d22ef55f0adf7f8803b8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10031
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Some subsystems report a very large maximum value for the number of
namespaces, but in essentially every case the subsystem is sparsely
populated with active namespaces. To save memory, don't allocate
objects for the inactive ones.
Change-Id: I4cbeb5a7a898d3c685f4a3a9ec4c2ce45efffb92
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9898
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Chaining may be faster, but this is really an implementation detail of
the idxd driver. Push the decision on how to implement a vectored crc
down into the individual drivers and eliminate it from the generic
framework.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Iedbdc5a6dbd3f7d1674d0a83f6827588f4b6b2fb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10291
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Zero-copy requests are kept on the outstanding queue for the whole
duration of the request - from the initial zcopy_start submission to the
completion of zcopy_end. This means, that there's a period in which a
request doesn't wait for a completion from the bdev layer, but is still
on the oustanding queue (after zcopy_start callback, before zcopy_end
submit). If a qpair gets disconnected while a request is in this state,
we need to manually force its completion, as otherwise it might hang
indefinitely (e.g. waiting for host data).
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I53731b8e363b725efa564ca3c7d89b46f5fb2a24
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10793
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
The zero-copy requests can also be queued when a subsystem is paused, so
we need to properly resume and submit them by using zcopy_start.
Since only requests that haven't received the zero-copy buffer (i.e.
before zcopy_start was called) can be queued, we don't need to bother
with checking zcopy_phase.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ie629688f6961eb2ae05741df496720b91be4d80d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10792
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We sort secondary trids to avoid using disconnected trids for failover.
However the sort had a bug.
This bug was found by running test/nvmf/host/multipath.sh in a loop.
Verify the fix by adding unit test.
Fixes#2300
Signed-off-by: Shuhei Matsumoto <shuheimatsumoto@gmail.com>
Change-Id: I22b0ede4d2ef98b786c3e0d1f5337a2d568ba56d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10921
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch adds the framework for a discovery
service in the bdev/nvme module.
Users can specify an IP/port of a discovery service.
The bdev/nvme module will connect to a discovery
controller, get the discovery log page, and then
register for AERs. It will connect to each
subsystem specified in the initial log page.
AER completions will trigger fetching the log
page again, at which point new subsystems will
be connected to, or removed subsystems will be
detached.
This patch does the following:
* Adds the new start_discovery RPC
* Connects to the discovery controller
* Gets the discovery log page
* Registers for AERs
* Detach from discovery controllers at shutdown
Subsequent patches in this series will:
* Connect to subsystems listed in discovery log page
* Detach from subsystems that were listed in earlier
discovery log pages but subsequently removed
* Add a stop_discovery RPC
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I54bfa896a48c5619676f156b5ea9f2d1f886c72f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10694
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Since spdk_bdev_zcopy_end() cannot really fail (it only fails if we pass
a bad bdev_io), we can simplify the nvmf zcopy_end functions by making
them void and always expect asynchronous completion.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I6e88ac28aba13acadea88489ac0dd20d1f52f999
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10790
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Since this path now supports sending zero-copy, use it for zcopy_start.
Additionally, it makes it possible make zcopy_start void, as it reports all errors
asynchronously via request_complete(), and remove some of the duplicated
error checks.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I41f43ce1651432d9a7d74e3680d4a3f780128a1d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10789
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Additionally, the NVMe completion status is now updated and the IOs are
queued if the bdev layer doesn't have enough IO descriptors. It makes
the zcopy operations behave similarly to the other IO operations.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I455ae781e32aa6e60d144d2c91f109bd8be46664
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10787
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It makes their names consistent with the bdev API.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I314051f0980b46959d6560aa25885f13b4c28f2a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10786
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It will make it possible to submit zero-copy requests through
spdk_nvmf_request_exec().
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ibc14fe77cd477b11ed55d1350a7486caaad81add
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10783
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The code should never reach these functions for requests using
zero-copy.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: If9f30e05a43b340a982604d5b985242d63ce252b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10782
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It makes it possible for the user to specify whether a transport should
try to use zero-copy to execute requests when possible.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I40a92b0d7a6707f4c9292795f380846acb227200
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10780
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If nvme ctrlr is resetting or initializing, free_io_qids
bitmap is already freed or not created yet. In that case
an attempt to create IO qpair leads to segmentation fault.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I6a97bf81d5a568db20d23b3f88cf01e994ba42e3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10827
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuheimatsumoto@gmail.com>
In current implementation RDMA qpair is destroyed right after
disconnect. That is not graceful qpair shutdown process since
there can be requests submitted to HW and we may receive
completions for already destroyed/freed qpair.
To avoid this, only disconnect qpair in ctrlr_disconnect_qpair
transport callback, all other resources will be released in
ctrlr_delete_io_qpair cb.
This patch is useful when nvme poll groups are used since in
that case we use shared CQ, if the disconnected qpair has WRs
submitted to HW then qpair's destruction will be deferred to
poll group.
When nvme poll groups are not used, this patch doesn't change
anything, in that case destruction flow is still ungraceful.
However since CQ is destroyed immediately after qpair,
we shouldn't receive any requests which point to released
resources. A correct solution for non-poll group case
requires async diconnect API which may lead to significant
rework.
There is a bug when Soft Roce is used - we may receive
a completion with "normal" status when qpair is already
disconnected and all nvme requests are aborted. Added
a workaround for it.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I0680d9ef9aaa8737d7a6d1454cd70a384bb8efac
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10327
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuheimatsumoto@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There is situation that num_extent_pages is zero and original pointer is
also NULL, the realloc() could return a Not NULL pointer.
Related UT has been added and updated.
1) In the default allocation (num_clusters == 0), the extent_pages is not allocated as expected.
2) In the thin provisioning allocation (num_clusters != 0), the extent_pages will be allocated if extent_table is used.
More related information as below:
The crux of the problem is that according to POSIX:
realloc: "If ptr is NULL, then the call is equivalent to malloc(size)"
malloc: "If size is 0, then malloc returns either NULL or a unique pointer value that can later be successfully passed to free"
blobstore was relying on realloc(NULL, 0) always return a unique pointer value, and not NULL. This is not portable behavior.
Change-Id: Ibc28d9696f15a3c0e2aa6bb2371dc23576c28954
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10470
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In the one place this was called, we can call nvme_ns_construct
instead. There's no harm in re-fetching the identify pages.
Change-Id: I91292ff9650bdc7edd5588a05837b671dcac1922
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10102
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In NVMF Revision spec 1.1a, discovery log should be updated
when removing hostnqn of subsystem.
Update unit test to check the discovery log when removing
hostnqn and destroying subsystem.
Signed-off-by: Peng Lian <peng.lian@smartx.com>
Change-Id: I51c597a2493295a677a7aa68e4f13a887f7e1140
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10668
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
