These were deprecated in 2019, it's time to remove
support for them now.
Change-Id: I9e203a52877802127df8144e68090d7975f9d200
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12772
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
And associated RPC to enable.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I06785bcd8b8957293ad41d13bab556fe62f29fd5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12765
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These were deprecated in 2019, it's time to remove
support for them now.
Change-Id: I25aea510648a55d751db3740b36fb9924d1f52ed
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12747
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
In prep for upcoming addition of IAA.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I3044f1e07dbfc65a6a55a7d68bbaff6a43e909d0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12761
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
IDXD has always been used everywhere but technically it stands for
the driver, not the HW (Intel Data Streaming Accelerator Driver)
where the X comes from "Streaming Accelerator" somehow. Anyway, the
underlying hardware is just DSA. It doesn't matter much now but
upcoming patches will add support for a new HW accelerator called
the Intel In-Memory Analytics Accelerator which we'll call IAA and
it will use the same (mostly) device driver (IDXD) as DSA. So, calling
the HW what it is will lessen confusion when adding IAA support.
This patch just does renaming for the accel_fw module and associated
files (RPC, etc).
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ib3b1f982cc60359ecfea5dbcbeeb33e4d69aee6a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11984
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
As introduced in 25bc221cee:
listeners for created subsystems should also be added
to discovery subsystem.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Id37854ea9a7877eb3e4eb37675d6918ef2931e7e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12676
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
libvfio-user has switched from cmake to meson; update the submodule for
this, and switch over to building with meson.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ia0749590271d0b74260c9118692c21e2a82dde23
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12640
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch utilize generic sma implementation by adding vhost-user
devices manager. It's allow to expose virtualized block devices to
QEMU instances or other arbitrary processes.
Max device capacity depend on available `pci-bridge`
```
devices:
- name: 'vhost_blk'
params:
buses:
- name: 'pci.spdk.0'
count: 32
- name: 'pci.spdk.1'
count: 32
qmp_addr: 127.0.0.1
qmp_port: 9090
```
To attach `pci-bridge` at boot time we need to run qemu with this option
```
device pci-bridge,chassis_nr=1,id=pci.spdk.0
device pci-bridge,chassis_nr=2,id=pci.spdk.1
``
Change-Id: Idbe841b12cf59975ff0e6717f8dc905d38379357
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12207
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Artek Koltun <artsiom.koltun@intel.com>
Since SMA keeps track of attached volumes and a volume might get
disconnected at any time (in which case they're also removed from the
host side), a mechanism is needed to monitor if any of the volumes are
no longer accessible.
This patch implements that mechanism by adding a new thread running in
the background that will periodically (60s by default) send a
bdev_get_bdevs RPC and check that all previously attached volumes are
available. If any of them are not, it'll remove it and stop the
associated discovery services (if their refcount goes down to zero).
The period can be changed through the `volume_cleanup_period` variable
in the config file.
One important thing to note is that we assume that any intermittent
connection issues are handled internally by the SPDK application and a
bdev is only removed after all reconnection attempts are performed.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I5b9e63698879527d9f79156a0eda1c8bc5e66def
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12699
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch adds support for connecting volumes via discovery service.
The user specifies a volume UUID/GUID and a list of discovery endpoints,
which are then used to start the discovery service on and attach the
volume to a device.
SMA will keep track of the attached volumes and will also refcount the
connections to discovery services. So if two volumes are attached using
the same discovery endpoint, it'll be disconnected only after both of
them are detached.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ie8ea50a2a784cf0db8a5953234c6bb2b68685d7c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12413
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This will make it easier to control various options through config file.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I19ab9c020d536521f5985227bc43965bd04d2707
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12724
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Most of the devices need to send RPCs during initialization (e.g. create
a transport), so we need to take care that they're initialized only
after we are certain that the SPDK process is listening.
The mechanisim is similar to the `waitforlisten` function used in our
test scripts - it sends a series of `rpc_get_methods` calls and times
out after a period of time if no response is received. For now, the
timeout is hardcoded to 60s.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Iddadc04ad4c486d2894bc40e1a899a9d204400fc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11802
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
If the app is killed with either one of these signals, it'll shutdown
gracefully and exit with zero.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I630f9e34c3ccb382c8e1b53d0f589f3ec4d1483b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11727
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This allows a user to specify the types of devices to support. Those
not specified in the config, won't get initialized and will not service
user's requests.
Additionally, each device manager can now receive its own configuration
in its init() method.
The device configuration is structured as a list of objects with two
properties: "name" and "params". The former identifies a device to
enable, while the latter contains a set of options (if any) specific to
that device manager. For instance:
```
devices:
- name: 'nvmf-tcp'
params:
max_queue_depth: 256
io_unit_size: 8192
- name: 'nvmf-vfiouser'
```
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I967016502ad93c243b3a7af58992bde14c44953c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11713
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch adds support for loading configuration from a yaml-formatted
file. The command-line options takes precedence over those from the
config file.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Iafb5b4aec0a64afe358fce2d6c55361fc4093223
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11712
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
These were deprecated in 2019, it's time to remove
support for them now.
Change-Id: Ic80ce74344b24814dad792cfff6a4791d0430527
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12741
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We try to modprobe msr so that DPDK can more easily figure
out TSC on x86 systems. But that just results in a
"Module msr not found" message on non-x86 systems. setup.sh
still works, but the error message makes it appear
otherwise. So just redirect the error message to reduce
this confusion.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I71074c7836519b003933551ce51a193070b1bfe6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12671
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Spread out used block devices evenly between
used initiators and then between initiators NIC
interfaces, so that in result each initiator
connects to the same number of subsystems.
Previous version had problems spreading block
devices / subsystems between interfaces in case
division remainder was not 0.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I045dc9313b0613685fc997f821fe66238026a645
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12732
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Save Initiator addressing information in Target object.
This will be needed later to properly spread created
subsystems between initiators and NICs.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I9e5545b7847bb16f3ce3d0ee56038003fda74e6d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12731
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I7813a31060af7b2f9aea1b0a0d99fb699670509a
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11667
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It's now possible to register SMA device managers defined in a module
outside of the regular directory. To do that, a global variable called
`devices` containing a list of device manager classes needs to be defined
in a module that's added to SMA_PLUGINS environment variable.
For example:
```
$ cat /path/to/plugins/external_devices/__init__.py
import spdk.sma as sma
class MyDeviceManager1(sma.DeviceManager):
pass
class MyDeviceManager2(sma.DeviceManager):
pass
devices = [MyDeviceManager1, MyDeviceManager2]
$ SMA_PLUGINS=external_devices scripts/sma.py
```
Multiple plugins can be specified by separating them with a colon, e.g.:
```
SMA_PLUGINS=plugin1:plugin2
```
Of course, the location at which these modules reside must be in
PYTHONPATH.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I2bb4cfea5191710f97d66abe3a21e4deacc6338a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11412
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It's now possible to specify the gRPC interface listen address and the
SPDK-RPC socket path.
Change-Id: I957cf4ca4e03eac6f4f6f7ffab5ee95c5b6f7521
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10979
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The SMA requires some extra python packages during the build to generate
the protobuf interface, so this option will select whether it's enabled
or not. Additionally, the dependencies are added to `pkgdep.sh` in this
patch.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib0d75c86d4d8575ec1245b219b4e96edb773b366
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10974
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Storage Management Agent is a gRPC server that provides an abstraction
layer above the SPDK RPC interface. The interface aims to provide a set
of methods for managing various protocols (e.g. NVMe, virtio-blk) while
hiding the details of a particular transport.
The external API is defined by `lib/python/spdk/sma/proto/sma.proto`
protobuf file. It defines the generic gRPC service methods and their
requests/responses. Device-specific messages are defined in their own
files. This patch also defines messages for creating NVMe and NVMe/TCP
devices.
This patch implements a gRPC service that delegates the work to a
specific device type. A DeviceManager is a class that implements some
of the methods defined by the service for a given type of devices (e.g.
NVMe, virtio-blk, NVMe/TCP, etc.). For now, only the RPC for creating a
device is implemented, others are added in subsequent patches.
The series implements the generic calls as well as their NVMe/TCP
implementation. Support for other devce types could be easily added by
creating a new device manager and defining its protobuf parameter
definition.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I17cde3b31d3514878f1027cfcd112b48848f6123
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10273
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It's now possible to specify a time to wait until a connection to the
discovery controller and the NVM controllers it exposes is made.
Whenever that time is exceeded, a callback is immediately executed.
However, depending on the stage of the discovery process, we might need
to wait a while before actually stopping it (e.g. because a controller
attach is in progress). That means that a discovery service might be
visible for a while after it timed out.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I2d01837b581e0fa24c8e777730d88d990c94b1d8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12684
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
By default, failback to the preferred I/O path is done automatically
if it is restored. Some users may want to keep using the backup I/O
path even if the preferred I/O path is restored. In this case,
bdev_nvme_set_preferred_path can be used to do manual failback.
We may be able to clear/fill I/O path cache more strictly but it will
be complicated and have bugs. This patch does the minimal change,
just skips an apparent case.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I78fe5faee6ff04e88ae3d7c6be6da1c20637c912
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12431
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Always reload ICE driver after tests with ADQ enabled.
This is to reset tc qdisc and filter settings and make
sure they don't affect future tests.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I70b94ef236741fe81870954f9901e02b9b5aadb9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12622
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These were deprecated in 2019, it's time to remove
support for them now.
Change-Id: I3b75eea83bd7d700d20a6189e8fb6d1f066dc9b4
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12603
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use different file to save calculated CPU utlization
and do not modify original SAR output.
Change-Id: I415242a5610f1c2a43a038baafa8dcc4f9e8fae2
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12526
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Move sar output file generation into measure_sar
function and pass a file name prefix instead.
More than one file will be created by the function
based on that prefix.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I671887d4d232821c0de19eb338150d30201be204
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12525
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Re-phrase "waiting" message a bit and add another
message notifying that measurements are actually starting.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I55d8ed761bf45a590322cffc5b776a44774977dd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12522
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These were deprecated in 2019, it's time to remove
support for them now.
Change-Id: I32dd9960bc397244d8e3d0a384fc8b67e907bf68
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12601
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These were deprecated in 2019, it's time to remove
support for them now.
Change-Id: I6931e80c836b568dec8989dad2a7be4e112c42b4
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12577
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These were deprecated in 2019, it's time to remove
support for them now.
Fix ocf test script that was still using the
deprecated get_bdevs RPC name - change it to
bdev_get_bdevs.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7f8caedc250b80503671a0236694181613f63860
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12553
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
These were deprecated in 2019, it's time to remove
support for them now.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2c9918ed0296f644b0728c5106c47d93e3c7ec30
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12552
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
By default centos7 uses openssl-devel version 1.0.2k
The newer version 1.1.1k is available with EPEL repo
Install and use newer version 1.1 for centos7
The new 1.1 version is needed for TLSv1.3 support.
Change-Id: I489f38dd519276741ab0bb2cf7bc2d368a16387f
Signed-off-by: Boris Glimcher <Boris.Glimcher@emc.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12511
Reviewed-by: Michal Berger <michallinuxstuff@gmail.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The RPC returns a list of active discovery service connections. Each
discovery service is described by a name, its trid, and a list of
discovery service trids it refers to.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ifa4b9501dd353e7b4948ad830575a6c94dafd86b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12380
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The NVMe bdev module supported active-passive policy for multipath mode
first. By this patch, the NVMe bdev module supports active-active policy
for multipath node next. Following the Linux kernel native NVMe multipath,
the NVMe bdev module supports round robin algorithm for active-active
policy.
The multipath policy, active-passive or active-active, is managed per
nvme_bdev. The multipath policy is copied to all corresponding
nvme_bdev_channels.
Different from active-passive, active-active caches even non_optimized
path to provide load balance across multiple paths.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ie18b24db60d3da1ce2f83725b6cd3079f628f95b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12001
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
If we specify a preferred path manually for each NVMe bdev, we will
be able to realize a simple static load balancing and make the failover
more controllable in the multipath mode.
The idea is to move I/O path to the NVMe-oF controller to the head of
the list and then clear the I/O path cache for each NVMe bdev channel.
We can set the I/O path to the I/O path cache directly but it must be
conditional and make the code very complex. Hence, let find_io_path() do
that.
However, a NVMe bdev channel may be acquired after setting the preferred
path. To cover such case, sort the nvme_ns list of the NVMe bdev too.
This feature supports only multipath mode. The NVMe bdev module supports
failover mode too. However, to support the latter, the new RPC needs to
have trid as parameters and the code and the usage will be come very
complex. Add a note for such limitation.
To verify one by one exactly, add unit test.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ia51c74f530d6d7dc1f73d5b65f854967363e76b0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12262
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: <tanl12@chinatelecom.cn>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Our CI explicitly uses v3.1.0 shfmt. Other versions,
including newer versions, may suggest a lot of script
changes that are different than what v3.1.0 reports.
So change check_format.sh to *only* run shfmt
checking if the version is exactly v3.1.0.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I788961faaae7992cf1369abf1e54f4075bd2521c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12309
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Centos7: ndb package version update - version 3.14-2
of the nbd package is no longer available in
epel repository.
Updated for version 3.24-1.
Centos8: repository URL change - old ceph
repository has Centos version mismatch.
Centos8: no need to install NBD package. It is available
on the system by default.
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: Ifae0833822b270127b31fe95c14f6803f688bfc6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12156
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add an new RPC bdev_nvme_get_io_paths to query all active I/O paths.
One io_path belongs to One nvme_bdev_channel.
Each nvme_bdev_channel is associated with one nvme_bdev.
If the RPC bdev_nvme_get_io_paths has a bdev name as a parameter
it can use spdk_for_each_channel() simply for the corresponding
nvme_bdev.
However, users will want to know I/O paths of all nvme_bdevs like
the RPC bdev_get_bdevs.
One io_path has one nvme_qpair. One nvme_qpair belongs to one
nvme_poll_group. By relying on these relationships, the RPC
bdev_nvme_get_io_paths traverses all nvme_poll_groups by using
spdk_for_each_channel() to g_bdev_nvme_ctrlrs.
The RPC bdev_nvme_get_io_paths has two modes, display all or
the specified NVMe bdev's active I/O paths.
The specified bdev name is used just for comparison and empty
array is returned if no matched io_path is found.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I4a0dbf3ef7aaa9a7b7345fc03dc493cc6d37bc99
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12146
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
As per the NVMe specification, a host can identify two areas of guest
memory: one of which is used for the host-written doorbells, and one of
which contains event indexes. The host writes to the shadow doorbell
area, but also writes to the controller's BAR0 doorbell area if the
corresponding event index is crossed by the update. This avoids many
mmio exits in interrupt mode, where BAR0 doorbells are not directly
mapped into the guest VM, with greatly improved performance.
This isn't a useful feature in BAR0 doorbells are mapped into the VM, so
we explicitly disable support in that case.
NB: the Windows NVMe driver doesn't yet support this feature.
Although the specification says that the admin queues should also engage
in this behaviour, in practice, no VM does, so have to include some
hacks to account for this.
Co-authored-by: John Levon <john.levon@nutanix.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I0646b234d31fbbf9a6b85572042c6cdaf8366659
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11492
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The value of ack_timeout is calculated according to
the formula 2^(transport_ack_timeout) msec.
Signed-off-by: zhangduan <zhangd28@chinatelecom.cn>
Change-Id: I5a938635d70693ddd405fa5907555bb745b4df0f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12215
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This probe was removed from the bdev nvme module during
some recent refactoring.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I31508fb67651693e1e9c4a656e2e7111c14a8415
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12002
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
After 7610bc38d, python modules are now located in the python/
directory. That patch also updated PYTHONPATH assignment in most of the
scripts, but one of the perf script and some docs/messages were missed.
Change-Id: Iff3588526f2a382e599f5734d38fc32c15a7bf56
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12223
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use "generic" Fedora34 from Roboxes, as we did for
all other Fedora Vagrant boxes.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I208264c50a067b26c9ec5da2250f27881ba8431d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12227
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Fix pylint findings:
- R0201 Method could be a function
Signed-off-by: Pawel Piatek <pawelx.piatek@intel.com>
Change-Id: I1b9141b9ab150e20fdcd63510b484c6be514efb5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12137
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is done to make sure we don't miss more complex setups where
target devices are not mounted but still hold some valid data that
shouldn't be touched in any way.
Also, adjust function names so they clearly indicate what is being
checked.
Signed-off-by: Michal Berger <michallinuxstuff@gmail.com>
Change-Id: Ibb0f1f21de68009a2f8f1faf4595a07ae527da35
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11111
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Up until now, importing an SPDK RPC python module was just a matter of
`import rpc`. It's fine until there's another module called `rpc`
installed on the system, in which case it's impossible to import both of
them. Therefore, to avoid this problem, all of the modules were moved
to a separate directory under the "spdk" namespace.
The decision to move to a location under a separate directory was
motivated by the fact that a directory called scripts/spdk would look
pretty confusing. Moreover, it should make it also easier to package
these scripts as a python package.
Other than moving the packages, all of the imports were updated to
reflect these changes. Files under python now use relative imports,
while those under scripts/ use the "spdk" namespace and have their
PYTHONPATH extended with python directory.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib43dee73921d590a551dd83885e22870e72451cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9692
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The concat module can combine multiple underlying bdevs to a single
bdev. It is a special raid level. You can add a new bdev to the end of
the concat bdev, then the concat bdev size is increased, and it won't
change the layout of the exist data. This is the major difference
between concat and raid0. If you add a new underling device to raid0,
the whole data layout will be changed. So the concat bdev is extentable.
Change-Id: Ibbeeaf0606ff79b595320c597a5605ab9e4e13c4
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11070
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If a VMD device present, add message to communicate to the user to use next steps.
Allow for DRIVER_OVERRIDE="none" to just unbind the driver without binding it to any other.
Fixes#2423
Signed-off-by: Samir Raval <samir.raval@intel.com>
Change-Id: Ifef6ed50dd619ce7629eabf458edd54e6bb22fa4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12035
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Setting this optional parameter to true makes the
RPC completion wait until the attach for all
discovered NVM subsystems have completed.
This is especially useful for fio or bdevperf, to
ensure that all of the namespaces are actually
available before testing.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icf04a122052f72e263a26b3c7582c81eac32a487
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12044
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
'Content-Length' is not always available
specifically when using 'chunked' Transfer-Encoding
https://en.wikipedia.org/wiki/Chunked_transfer_encoding
This patch allows to handle chunked data transfer
and construct the request from peices.
The example of how to send chunked data:
> curl -k --user spdkuser:spdkpass -X POST -H "Content-Type: application/json" \
-H "Transfer-Encoding: chunked" \
-d '{"id": 1, "method": "bdev_get_bdevs"}' \
http://127.0.0.1:9009/
vs
> curl -k --user spdkuser:spdkpass -X POST -H "Content-Type: application/json" \
-d '{"id": 1, "method": "bdev_get_bdevs"}' \
http://127.0.0.1:9009/
Signed-off-by: Boris Glimcher <Boris.Glimcher@emc.com>
Change-Id: I6cf565d6639aa31898585f005d75785c43204552
Signed-off-by: Boris Glimcher <Boris.Glimcher@emc.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12082
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This opption allows the bdev_get_bdevs RPC to block until a bdev with
specified name appears. It can be useful, when a bdev is created
asynchronously and the exact moment at which it appears is not known.
For instance, with a discovery service, a bdev is created when a
namespace on a remote NVMeoF target is added, but it's not possible to
specify when that happens exactly.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I6c1f974fba445376ca9d45aac2639202547410cc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11960
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
These parameters will be used for any controller created
by the discovery service.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I221b791f38b9c5797ba084c647a98b82c102a121
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11942
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
In vfio-user transport, whenever one IO is completed, it will trigger
an interrupt to guest machine. This cost quite some overhead. This patch
adds an adaptive irq feature to reduce interrupt overhead and boost
performance.
Signed-off-by: Rui Chang <rui.chang@arm.com>
Change-Id: I585be072231a934fa2e4fdf2439405de95151381
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11840
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
With these we can write a simple bpftrace script to identify work being done,
and in particular what woke us up from sleeping.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I8997d847625ee4558092dbd753e6fc1b17beca92
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9424
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
SPDK has settled on what the optimal DSA configuration is, so let's
always use it.
Change-Id: I24b9b717709d553789285198b1aa391f4d7f0445
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11532
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Make use of code implemented in previous patches in the series
to get and set dynamic scheduler values.
Modifiy app.py and rpc.py to accomodate new changes and allow
user to specify scheduler parameters in the RPC calls.
Change-Id: I6173aefbf1d774b91b80ee5bce67eea80a2ab23d
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11449
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add three options for I/O error resiliency to spdk_nvme_bdev_opts.
Then the RPC bdev_nvme_set_options can configure these.
These can be overridden if these are given by the RPC bdev_nvme_attach_controller.
Change-Id: If3ee23aeef8b7585fe0fb5ec4695df5866fc1e74
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11830
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In case collect_driver() returns immediately due to missing modalias
attr, an empty $driver will be passed to check_for_driver() causing
grep inside to fail. Further false-positive then leads to call to
linux_bind_driver() as it's not able to locate proper paths for
given driver.
To avoid this, make sure collect_driver() always attempts to fallback
to a driver setup.sh supports for a target device.
Signed-off-by: Michal Berger <michallinuxstuff@gmail.com>
Change-Id: Id5631a731910f60b63c6afb3a412575bb69d784a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11747
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The following patch will need it to expand the %{python3_sitelib} macros
when building the RPMs.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I2782b228066fa0524d675c8d964217a7c9d11e36
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11656
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Now that users need to explicitly add a listener for the discovery
subsystem, make that a bit easier when using rpc.py. Instead of
having to type out nqn.2014-08.org.nvmexpress.discovery, allow
user to just specify 'discovery' as the NQN and rpc.py will
convert it to the discovery NQN before sending the RPC.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4854d4f072f1758fdd6b37a4c3685e2a2d015caa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11540
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I80e1fdb8b0a3b944ab6efdd21187cef07b685c29
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11271
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This was left out by the ea71df4f48.
Signed-off-by: Michal Berger <michallinuxstuff@gmail.com>
Change-Id: Ibd341eaa7e5a0b1a409a9efad081555728b7f880
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10941
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This parameter was ignored, and was a parameter to the
nvmf_set_config RPC.
For reference, this was deprecated in June 2020, commit
c37cf9fb.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I013f4d7cf874e7e26a8a1d299fdf9d8fa05da580
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11544
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This was a parameter on the nvmf_create_transport
RPC, and was replaced with max_io_qpairs_per_ctrlr to
reduce confusion on whether this number included the
admin queue or not.
nvmf_vhost test was using this deprecated parameter.
Change it to use -m (max_io_qpairs_per_ctrlr)
instead. '-p 4' would have been evaluated as 1 admin
queue + 3 I/O queues, but it's likely the intent
was for 4 I/O queues. This is a perfect example of
why this parameter was deprecated.
For reference, this was deprecated in June 2020,
commit 1551197db.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4364fc0a76c9993b376932b6eea243d7cefca9cd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11543
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
rpc.py users can pipe RPC calls through stdin, which
reduces overhead compared to calling rpc.py
separately for each RPC.
It is common to put these RPC calls in a file, and
then pipe that file to rpc.py. To allow commenting
out RPC calls when doing debugging, have rpc.py
ignore any lines which begin with '#', allowing users
to comment out RPC calls (or even add comments
explaining the RPC calls) with a '#' character.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8d9c6ac95dd5864c16e4d69ba80f81799068e808
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11506
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Using time_based tasks with do_verify=1 and rw=write
results in verification not being run. Basically
writes consume all run time and there's no time
left for verify:
fio: verification read phase will never start
because write phase uses all of runtime
Using verify_backlog we ask fio to verify after every
N blocks written.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I4c1571f4fad893e47cc5fea2ad6b4e2a7d8cc5ef
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11376
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Provides RPCs for the qpair error injection APIs to bdev_nvme.
These RPCs are useful in testing NVMeoF/NVMe behavior for various
error scenarios in production.
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Change-Id: I0db7995d7a712d4f8a60e643d564faa6908c3a55
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10992
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It may take a long time to detect network transport error
when e.g. port is removed on remote target. This timeout
depends on 2 parameters - retry_count and ack_timeout.
bdev_nvme_set_options supports configuration of retry_count
but transport_ack_timeout is missed. Note: this parameter
is used by RDMA transport only.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I7c3090dc8e4078f64d444e2392a9e0a6ecdc31c0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11175
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: <tanl12@chinatelecom.cn>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Added preallocation option for raw NVMe disk images.
It matches qemu-img option for raw images.
By default raw images are created with "off" option,
resulting in increased size of the disk image as it is used.
Using "falloc" option preallocates the full size of the disk,
but does not write zeroes to it, compared to "full" option.
This will make sure that in CI, a device used during test
is never exhaused due to lack of host space.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie1c30909dc87552a6d6c385d0ad80905ce68ff9d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11243
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK test script can fail during any point of the
execution. To keep using the same devices
between test runs in CI, those devices have to
be cleaned between runs.
To select device for tests or to clean before tests,
the partition table and lack of mount points is used.
SPDK GPT partitions were always considered not in use.
Meanwhile Linux GPT were not, even if lacking a mount
point.
Some of the SPDK tests create Linux GPT partitions,
which might remain after a test run.
Linux GPT partitions created during tests now contain
"SPDK_TEST" as part of their partition name.
This allows marking such block devices as 'not in use',
to be cleaned and used in further SPDK test.
fixes#2345
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I0098776239da9b0c5dcc748625485284e4863525
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11220
Reviewed-by: Michal Berger <michallinuxstuff@gmail.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: Michal Berger <michallinuxstuff@gmail.com>
Change-Id: I5e1cdb75b8b4421b2a38fe315f75e11d8ea5de23
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11110
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add configuration options to enable using IDXD
for data digest during NVMe-oF performance testing.
Change-Id: I54d443c35c67e0331e3d6ec4aecb577fc7f544c7
Signed-off-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10282
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add more dtrace probes to help with identifying issues
in production.
Change-Id: I8fb621a15c5e33ae94d75b4fc31135e2635dcfce
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10561
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I72fc8cb42f57d3272a08a6cefc58b2fa5eb26419
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11094
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
As described in Python documentation:
It is not guaranteed that __del__() methods are called for
objects that still exist when the interpreter exits.
Because of that class instance objects were not always destroyed
after tests.
Change-Id: I10f05a480cde37d274d6475efdf47d094cab7cb9
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11136
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If ctrlr_loss_timeout_sec is set to -1, reconnect is tried repeatedly
indefinitely, and I/Os continue to be queued.
This patch adds another option fast_io_fail_timeout_sec, a flag
fast_io_fail_timedout to nvme_ctrlr.
If the time fast_io_fail_timeout_sec passed after starting reset,
set fast_io_fail_timedout to true not to use the path for I/O submission.
fast_io_fail_timeout_sec is initialized to zero as same as
ctrlr_loss_timeout_sec and reconnect_delay_sec.
The name of the parameter follows the famous DM-multipath, its fast_io_fail_tmo.
Change-Id: Ib870cf8e2fd29300c47f1df69617776f4e67bd8c
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10301
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously reconnect retry was not controlled and was repeated indefinitely.
This patch adds two options, ctrlr_loss_timeout_sec and reconnect_delay_sec,
to nvme_ctrlr and add reset_start_tsc, reconnect_is_delayed, and
reconnect_delay_timer to nvme_ctrlr to control reconnect retry.
Both of ctrlr_loss_timeout_sec and reconnect_delay_sec are initialized to
zero. This means reconnect is not throttled as we did before this patch.
A few more changes are added.
Change nvme_io_path_is_failed() to return false if reset is throttled
even if nvme_ctrlr is reseting or is to be reconnected.
spdk_nvme_ctrlr_reconnect_poll_async() may continue returning -EAGAIN
infinitely. To check out such exceptional case, use ctrlr_loss_timeout_sec.
Not only ctrlr reset but also non-multipath ctrlr failover is controlled.
So we need to include path failover into ctrlr reconnect.
When the active path is removed and switched to one of the alternative paths,
if ctrlr reconnect is scheduled, connecting to the alternative path is left
to the scheduled reconnect.
If reset or reconnect ctrlr is failed and the retry is scheduled,
switch the active path to one of alternative paths.
Restore unit test cases removed in the previous patches.
Change-Id: Idec636c4eced39eb47ff4ef6fde72d6fd9fe4f85
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10128
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
In project practice, config_file and key_file are often used to connect
to a rados cluster, config_file includes "mon_host" and other rados
configurations like "rbd_cache", and key_file includes the secret key
and the access authority to each pool for current user. This patch adds
key_file option, user can specify config_file and key_file or only config_param
to connect rados cluster. This will make it much more flexible for users with
his/her convenience.
Signed-off-by: Tan Long <tanl12@chinatelecom.cn>
Change-Id: I6b49aad70b578bdeb3ac8ea9ca0fcbd931582025
Signed-off-by: Tan Long <tanl12@chinatelecom.cn>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10485
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add support to enable individual traces through rpc commands
and modify jsonrpc.md to describe the changes.
Change-Id: I3664fc28f1c25a76eade4cff0a0ab1870172f8de
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10518
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add dtrace probes aroung qpair/controller/subsystem management
to help with debugging issue #2055.
Change-Id: I0b981bffadee3fe4172ad6916c059bf357959dde
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10237
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This RPC will stop the specified discovery service,
including detaching from any controllers that were
attached as part of that discovery service.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9222876457fc45e1acde680a7bd1925917c22308
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10832
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
This patch adds the framework for a discovery
service in the bdev/nvme module.
Users can specify an IP/port of a discovery service.
The bdev/nvme module will connect to a discovery
controller, get the discovery log page, and then
register for AERs. It will connect to each
subsystem specified in the initial log page.
AER completions will trigger fetching the log
page again, at which point new subsystems will
be connected to, or removed subsystems will be
detached.
This patch does the following:
* Adds the new start_discovery RPC
* Connects to the discovery controller
* Gets the discovery log page
* Registers for AERs
* Detach from discovery controllers at shutdown
Subsequent patches in this series will:
* Connect to subsystems listed in discovery log page
* Detach from subsystems that were listed in earlier
discovery log pages but subsequently removed
* Add a stop_discovery RPC
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I54bfa896a48c5619676f156b5ea9f2d1f886c72f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10694
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
It makes it possible for the user to specify whether a transport should
try to use zero-copy to execute requests when possible.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I40a92b0d7a6707f4c9292795f380846acb227200
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10780
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If a function prefixed with spdk_ was moved between
files, the check_format.sh naming convention checks
would fail. This is because it thinks the function
was added, but doesn't see it getting added to the
header file, since the header file wasn't touched
by the commit.
So resolve this by doing the defined/removed checks
on a per-library basis, rather than per-file. The
checks already handled the case where functions
were moved within a file, and that will all work
the same now that we check on a per-lib basis.
Fixes issue #2307.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If85a1e9c3cd349b701a10531726e814b60fba26d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10967
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: wanghailiang <hailiangx.e.wang@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Modify nvmf_path.bt to collect the (ip, port)
tuples in a map, and then print the map every
second. This generates a lot less output than
printing the path for every single I/O.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8f655ed7a4558735f51ddf1169134fbf6950cc1c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10616
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Default configuration need to be changed due to Openstack network
service change from OVS to OVN. Previous configuration is no longer
valid with new network service
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I39f77a3ac75c35f1551c0097b8344e654b2029dd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10959
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
We should gather the core regardless of the RLIMIT_CORE setting.
Also, don't limit number of parallel executions of the collector
in case more than 2 processes crashed (unlikely to happen anyway,
but just in case make sure we cover it). Lastly, wait a bit longer
for the potential cores.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ic7de8f8000676122282469b729f45b235ab6f9ca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10852
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I780568b9c95a47038278c3ed19fb08228a48fb9c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10740
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I6794886832ec641ec18b72621f21264970d805d5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7118
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Not every transport requires accept poller - transport specific
layer can have its own policy and way of handling new connection.
APIs to notify generic layer are already in place
- spdk_nvmf_poll_group_add
- spdk_nvmf_tgt_new_qpair
Having accept poller removed should simplify interrupt mode impl
in transport specific layer.
Fixes issue #1876
Change-Id: Ia6cac0c2da67a298e88956734c50fb6e6b7521f1
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7268
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ib95e9561299ceed3a37665da1decbfb9fce300dc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10356
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Added an option, `--format-lspci` that produces output that can be
consumed by `lspci -F`. Additionally, added a simple convenience script
that executes lspci with the the output of the RPC.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I41a0f846f32506c28cf6ca3a299ed264f64db1a4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10653
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This RPC lists all PCI devices attached to an SPDK application. Each
device is identified by a BDF and contains a buffer with a copy of its
config space.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I852f421fde105d975458f8e63b8da4f92ed2c69b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10652
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
Update scripts with Fedora 35 and remove older
versions which we no longer use.
Change-Id: I54d9f3bcf76065f3e4e3094411d77153c351afc9
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10612
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
As we known, there's a bug in argparser, which puts
required descriptions in optional list.
There are many such descriptions, if not to break a
lot of existing scripts, just adding a notice description
behind required item.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I3d8d2db96dc947d8342cc4e04ce3914da64be146
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10580
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
check_format.sh requires the following, none of which
are supported by default on MacOS and require alternative
homebrew installation for GNU variants:
* mapfile command not supported by bash
* -f option for readlink
* -P option for grep
Note that SPDK is not supported on MacOS, the changes
here are added only for developer convenience.
Fixes issue #2255.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic3d4ed49d9bfb4be50a8dd090a34090037f592c0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10476
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This also translates into switching fully to upstream QEMU for the
vagrant setup.
This is done in order to move away from OCSSD and SPDK's qemu fork
and align with what upstream QEMU supports. Main changes touch the
way how nvme namespaces are configured. With >= 5.2.0 it's possible
now to configure multiple namespace under single nvme device. Each
namespace requires a separate disk image to work with. This:
-b foo.img,nvme,1...
-b foo.img
-b foo.img,,..
Will still configure nvme controller with a single namespace attached
to foo.img.
This:
-b foo.img,,foo-ns1.img:foo-ns2.img
Will configure nvme controller with three namespaces.
Configuring nvme controller with no namespaces is possible via:
-b none ...
Note that this still allows to define other options specific to nvme
controller, like CMB and PMR. E.g:
-b none,nvme,,true
This will create nvme controller with no namespaces but with CMB
enabled.
It's possible now to also request for given controller to be zoned.
Currently if requsted, all namespaces under the target controller
will be zoned with no limit set as to max open|active zones.
All nvme devices have block size fixed to 4KB to imititate behavior
of the SPDK's qemu fork.
Compatibility with spdk-5.0.0 fork is preserved in context of setting
up namespaces so this:
-b foo.img,nvme,2
is valid as long as the emulator is set to that of spdk-5.0.0's.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ib5d53cb5c330c1f84b57e0bf877ea0e2d0312ddd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8421
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It's been some time since SPDK switched from ini to json,
there's no much benefit from keeping these tests around.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I0cf7fcd6587abe872553211e41bee12e14bf234f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10065
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
TypeError: ethtool_after_fio_ramp() argument after * must be an iterable, not int
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I12403967b5b8ce7282c65296a54e00bd047cf903
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10367
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This driver is now built by vm_setup.sh and installed under
/lib/modules.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Icea6b96e60390932c14ff49405614c186e61a99b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6099
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We provided list of IP addresses as the example of the list of the
initiator names of the iscsi_create_initiator_group and
iscsi_initiator_group_add_initiators RPCs.
However, they were very confusing and gave little hint about how
to use initiator name.
Fix them by providing IQNs instead.
Fixes issue #2209
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8ce19c4ed0af54fd8a6f1ab2a74b2e6f865d3d1c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10236
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Versions of centos we support - 7 and 8 - don't ship with ruby which
can handle installation of the mdl gem due to unmet dependencies -
it's simply too old.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Id0a3843bcab12b8de332d1d3f64956f043c347e3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9483
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Get shfmt package according to arch.
Change-Id: Ib51feb64368e1ef559c886d9899dd7a1f28cff95
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9996
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Allow to specify optimal IO boundary for
malloc bdev, it can be used to test split
of IO requests on generic bdev layer
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ic3529dc00cf852ea5cf40d0553d846a698fff6c7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10068
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
In case of linux systems, which don't provide /etc/os-release, the
ID would become plain "linux" (due to a fallback to uname). This
would result in a confusing message stating that we don't support
a "linux" platform. Instead, be specific as to what we are looking
for and what distros we support.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: If6a71ea08b315f54c906206165e3dbcd4c21379c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10260
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3f1589880a00a0788fe5fbb2104789b3f81e1497
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10188
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When I use a single json config to run 4k and 64k together, the IOPS
for the 4k test were lower than expected because the script is using
metrics from both the 4k_64_randrw_m_100_* and 64k_64_randrw_m_100_*
to calculate the average metrics because 4k_64_randrw_m_100_* is in
64k_64_randrw_m_100_*. Fixed issue by checking, if the result file
startswith the name of the fio config file.
Change-Id: I630385c34223b38694d7e2bb578779627c89866d
Signed-off-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10127
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
From the CI perspective, this allows for proper binding of given
VM builds to specific tasks (e.g. use this image for LTS, this
one for release, etc.) since by default vagrant always uses the
"latest" version of given box.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I0cbd2a47e7dbdcbe83d18e3fc3100fd2a2400983
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10132
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I1b437ee8f63e7cc15e60f611fe0c814542c73ece
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10131
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
This can be used for multipath validation.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iba62c5e90b22a9a85078fbc783d3a7273c029cde
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10137
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If trsvcid is not set in the nvmf_subsystem_remove_listener call,
rpc client treats it as 'None' and sends "null" to the application,
which causes decode failure in SPDK.
Trsvcid is described as optional and should be treated this way.
For such a listener removal call with an empty trsvcid, "" should be
sent as trsvcid instead of "null" in the json request.
Signed-off-by: Blachut, Bartosz <bartosz.blachut@intel.com>
Change-Id: Ic26907c22a2600c9618354ce8ff63e93e00aec09
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9659
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will allow runtime observation of the
dynamic scheduler in a release build.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7436b5dbcaa0df1529f828ef75f4e9335a092893
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9672
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add bdev_retry_count to spdk_bdev_nvme_opts and retry_count to
nvme_bdev_io, respectively.
Set type of both to int because we want use -1 for infinite retry.
Set the default value of bdev_retry_count to zero for the backward
compatibility.
bdev_retry_count is configurable by the RPC bdev_nvme_set_options.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9bc746fcea54aa8722c76f79c70c2ae2b375aa53
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9864
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
retry_count of struct spdk_bdev_nvme_opts controls the number of retries
in the transport layer, and is set to transport_retry_count of struct
spdk_nvme_ctrlr_opts.
The next patch will add bdev_retry_count to struct spdk_bdev_nvme_opts
to control the number of retries in the bdev layer.
For clarification, rename retry_count to transport_retry_count of
struct spdk_bdev_nvme_opts. Then deprecate the retry_count parameter
and add and use an new parameter transport_retry_count instead for
the RPC bdev_nvme_set_options.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0689c54aa1c96ee99d24236e8ff1a594ad7208e4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9924
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
SPDK nvmf target reports all listeners on all subsystems
in discovery pages, kernel target reports only subsystems
listening on a port where discovery command is received.
NVMEoF specification allows to specify any addresses/
transport types. Ch 5: The set of Discovery Log entries should
include all applicable addresses on the same fabric as the
Discovery Service and may include addresses on other fabrics.
To align SPDK and kernel targets behaviour, add filtering
rules to allow flexible configuration of what should be
listed in discovery log page entries.
Fixes#2082
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ie981edebb29206793d3310940034dcbb22c52441
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9185
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
You can now detach specific paths based on the host parameters. This is
useful for two paths to the same target that use different local NICs.
Change-Id: I4858bfda7d940052ca77ffb0bbe764a688fb315d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9827
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
This patch is to solve the issue that two nvmf target connect the same rbd image and used for multipath.
The scenario is host wants to access the same rbd image via two gateways, host and gateways are working as nvmf ini and tgt, and two gateways connect with the rbd image, io can switch to another gateway once one is broken. The targets of multipath must have the same uuid, so this patch add a new argument for bdev_rbd_create, like malloc dev.
Signed-off-by: tanlong <948985618@qq.com>
Change-Id: I593fedb6c5d94f625f1b331fdc40e2db488f7fb7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9935
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also moved qat_setup.sh to functional tests
fixes: GH#2203
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Iab69b192a29013a69f4cc4a251a34dcc6fbf6b7d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9952
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Currently the only way to see the relations, while using trace.py script,
is to feed it a JSON formatted file. This patch allows trace.py
to do the same for the for the binary trace files.
Change-Id: I7237896ede608080d3bec896a43586e34c297b04
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9906
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Make use of the changes introduced in previous patches while
printing trace information.
Change-Id: I69edadfb4a7d34fa9c8c1c520b083372317cabbb
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9638
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Currently we do not have any way to connect traces from different
modules in SPDK. This change modifies our trace library
and app/trace to handle adding relations between trace points
and a trace object.
Additionally this patch adds classes and fields to structs
inside trace.py to prepare it for future patches implementing
printing relation information.
Change-Id: Ia09d01244d923957d589fd37e6d4c98f9f7bbd07
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9620
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Forced grep to use use basic regular expression syntax (-G option) and
removed escape characters from "{", as they're not needed in this mode.
It fixes the following errors:
fatal: command line, 'enum spdk_nvmf_subsystem_state \{': Unmatched \{
fatal: command line, 'enum nvmf_tgt_state \{': Unmatched \{
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I7dd15207d6ff22d229d8f66668d33e0f5596379e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9932
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If an USDT probe is defined within a shared object, bpftrace expects the
path to that shared object instead of an executable. This means that we
need to replace __EXE__ in the bpftrace scripts differently, depending
on whether the application was linked statically or dynamically.
This is now done by the `scripts/bpf/gen.py` script. It lists all
available probes, along with their locations, of a process. Then, it
matches them to those described in a bpftrace script replacing the
__EXE__ markers with the listed location (either a path to the
executable or a shared library). If a bpftrace script uses a probe that
isn't listed, its __EXE__ will be replaced by a path to the executable.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I7c323d5f7d948ea57cf8d4d3132e4d59a2de594f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9807
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Id22c28c46a5fbdf5bd76b31d16f07f2672dfe14e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9306
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I4f838df0bfb91398eb5d179a982165adb8af3476
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9291
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ib24714363405f926ac8483244b24296fe35d5a86
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9591
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
A temporary workaround for issues seen when using "adq_enable"
is to set channel-pkt-inspect-optimize on before fio ramp_up and
turn it off when ramp_up is ending.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I74f71d11e3b9d1a064b36de8acc7a2a23f51a34b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9879
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
* Added sleep as sugested in config guide
* Moved adq_configure_tc() before nvmf_create_transport()
* Added extra logs to output
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Icc253b98a0fadbe917e912342f91e2bc5ca5064b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9703
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add tcp events changed in previous patch to the trace.py for
enhanced event information.
Change-Id: I8f176905a8283ba1b588d95bdbc075c38677acbe
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9307
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Changed the way a line is formatted to avoid unnecessary operations.
This slightly (~5-10%) decreases the runtime when the script is executed
on large trace files.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I5549462d56f866bea99609f746aa53890b98d622
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9442
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
The stack trace is no longer printed if a user presses <C-c> while the
script is running or pipes its output to tools such as head or less.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I0951c38d914986b5c9bf2ee98bcd046f0e957ff0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9441
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
It makes it more convinient for a user to start the script, as it's no
longer necessary to update the library path manually.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I0dbeb54cad2585a50162c91f48c5ef199fa133b9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9440
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Added trace provider based on the trace library. It uses ctypes to
define the trace objects and execute library calls. It significantly
(~2x) speeds up the execution time on large trace files.
The script automatically detects the type of the trace file and will use
the appropriate engine (either JSON or the trace library) using
python-magic for file detection. When piping a file through stdin, JSON
format will be assumed.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Icfa216edee4662714266968eeb72f0097b3779b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9439
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
At least on my system, I need an extra escape for
the opening brace in the generated enums.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2f1d55f817bc10b3b1084d8280f330cdbd50edf6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9671
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
bpftrace scripts do not allow struct definitions after
the first probe definition (including BEGIN/END).
This is problematic for an upcoming patch which will
include some struct defintions.
So instead just add the generated BEGIN/END probes
with enum definitions to the end of the user-specified
script, instead of the beginning.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7bc8c18c0891ee26edc099aef96ea18ed63ccb72
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9670
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ibcc7a77d1ebcc013b5050564fcc31b23b1202912
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9840
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
This parameter may have the values "disable" or "failover". The default
is failover to match existing behavior. In the future we expect to
change the default behavior to disable.
Further, we expect to add an "enable" option soon to do full multipath.
Change-Id: Iebbdc9b95f23101f18d64e085933463498e627be
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9343
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I1a4d32de6a83800cdcd65dde3895a36731c52838
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9710
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These fields aren't needed by the JSON provider, as the trace entries in
this format already has the owner and object fields filled, but it'll be
needed for the provider using the trace library.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I9db974793193fe59bfffc8dd3b975d5343036be9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9438
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This abstraction will make it possible to support different sources for
the traces. The current JSON implementation is moved to a provdider and
a new one using the trace_parse library will be added in the following
patches.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I322e7984ffe19ce8b8e1bb551e8339655383623f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9437
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ifdd1d02b466b6496469c9ea1f09633b6e368ab57
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9617
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Similar is already done for json-rpc bdev_get_bdevs, it might be
useful for the upper layer which has no interest in all but only
in one specified.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ie1af1cb4778edd265914bbfdc2777f66c6c76572
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9362
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ifa8e80e0a25af7757181f480ab0405ec902a61ff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9596
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add "create_remote_json_config" which will create
a bdev JSON configuration for SPDK initiator to
connect to NVMe-oF Target.
Change-Id: I2370c6911df35ffa1f27e93bdfa4ddb7f174ea49
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8776
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ia858a47e51a6ef4a0fba1dc1e68d314b27e20342
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9276
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The check needs to fail if documentation is missing
for any RPC. But the way the check was written, the
rc would get set to 0 everytime it found docs for
an RPC. This means it would only return failure if
the last RPC that was checked did not have
documentation.
While here, add a message telling the user that
JSON-RPC docs are being checked, to be consistent
with other checks in this script.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib2ff0f0432ce3e2853526223c0ad00176d84a78c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9391
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
SPDK has been inconsistent in the argument names,
most use dashes (--max-subsystems, --io-unit-size),
but in some cases we had underscores (--tgt_name,
--include_aliases).
So let's do 3 things here:
1) convert all argument names to use dashes only
2) if user passes and argument with an underscore,
convert it to a dash implicitly - this ensures
backward compatability and is a bit less pedantic
3) enforce use of dashes in check_format.sh
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I99289d3d3b03ce40cf192ad4fddec7b5c6bc8388
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9390
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This one provides devtoolset packages which can be used for adding
alternatives for some older packages like gcc for instance. Useful
for the CI to bring newer stuff into VMs.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ia82d712e670177f37256a999f5dc2a07784d2218
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9500
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Some distros may already provide liburing (e.g. fedora34) as a
package. In case given system has it installed, without the devel
portion, we would skip building our own version leaving system
without proper include files needed for the tests.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I7b07ba8d1c3c6b97d6b114935dfe472cc7902bf6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9543
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This script contains the necessary steps for the cross-compilation
of SPDK and the libraries needed by SPDK for aarch64 on x64 machines.
Signed-off-by: Krishna Kanth Reddy <krish.reddy@samsung.com>
Change-Id: I6319f461242b267ca4b63f276d98ee8820085bfe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8784
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
MD040 - Fenced code blocks should have a language specified
Fixed all errors
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Iddd307068c1047ca9a0bb12c1b0d9c88f496765f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9272
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Similar is already done for json-rpc bdev_get_bdevs, it might be
useful for the upper layer which has no interest in all but only
in one specified.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I25f7d20ff953e612d7982207d57607f1c3bbaa90
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9361
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Do not print ETA output. This pollutes logs when long
benchmark tests are run.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I0dfe30fdd727decb4d81be6b530e675bc1f4518c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9379
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
As per os-release(5), if $ID is not recognised, $ID_LIKE can be used
to identify similar systems in preference order. Modify the script to try both
variables.
Also do the same for the RPM build scripts.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I4ed924df01ec678aab232e114d8c9980463c38e0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9260
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
In case SPDK app crashed the leftover sock file would force completion
to use rpc_get_methods() instead of the -h output to get the list of
rpc functions. The end result would look something like:
$ rpc.py <TAB> IsSPDKapplicationrunning?
By the very accident this is quite informative about the state of the
app but from bash-completion standpoint not very useful. Instead,
if rpc_get_methods() fail fallback to -h output.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I9ca0b919445e5a08c49ab8fa5d0a3acc2e5c4e4e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8448
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
This helps in completing, for instance, file paths as arguments to
some of the rpc functions (like bdev_aio_create, etc.).
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Id0880773fade3fc6128ac9de6abfe19f6b40077f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8447
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Symlink requires repo to be around, having a hard copy allows it to
be used standalone.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: If5aa354b10762805394418e9c9c0d171623ba093
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8446
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
As far as we're aware, this is not in use by anyone. OCSSD has largely
been replaced by ZNS and no OCSSD drives made it to the market.
Change-Id: I020ee277da5292f8c4777f224acafd87586f8238
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9328
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
MD025 - Multiple top level headers in the same document
Fixed all errors
Update check_format.sh to fit new header style in jsonrpc.md
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ib5f832c549880771c99c15b89affe1e82acd3fa4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9045
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add option to enable gathering BPF traces while
running the test.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I9ea317a37c3638def40a525eca06f2d8325a74c2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8644
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Allow redirecting output to file. Using simple
"if" for an environment variable, as script arguments
number is variable and using getops seems like an
overkill.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I7e219bb1fd6377bc20c44b76cec3685b32e9316c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8643
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
create_json_config_with_subsystems contents does not
need to be in a function. Moving it to main simplifies
--with-subsystems condition.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I1414a209cc666ebb4639fc25133168482bd96c97
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8775
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
No need to keep "bdfs" variable as global variable.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I655ed9f1514f13a6460292c1298ef08f904157fa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8774
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I21b7798e1004b227bcd7f62ee8867667c67dab7c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8773
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
-g option using only files known to git, that allow us
to avoid errors from submodules
Also add check if mdl is installed, and gracefull info if not.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ib6e1920774ffca81e62d9abebc8d8b4548feb519
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9086
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Since we will create new bdev relied on libpmem object
library, so need add it.
Change-Id: I7ddcc694fd2ec5a0536abc9813b13fa429fcf068
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9049
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This package is no longer available in PyPI.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I3e68b03eabeb4aff14453c90846fd03452c93ae2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8956
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Parses and verifies hexadecimal cpu bit mask specified by the user.
Added verification to check for cpu cores range, making sure poll groups cores
assigned within the range of cpu cores allocated for the application.
RPC nvmf_set_config now takes an argument to configure ‘poll groups’,
a new parameter for NVMf subsystem. This parameter sets a CPU mask
to spawn threads which run an event loop for a ‘poll group’.
Change-Id: Ied9081c2213715ec94de00a8b37153730b8ac2ed
Signed-off-by: Yuri <yuriy.kirichok@hpe.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5611
Community-CI: Mellanox Build Bot
Reviewed-by: Matt Dumm <matt.dumm@hpe.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This parameter is still part of API spdk_sock_impl_opts
structure but it is not used. Keep it to support ABI
compatibility since it is located in the middle of the
structure and removing it may break socket opts initialization
or parsing.
Change-Id: Ib641ad7d965d68bc9ebb65dba531408d88cf6fa1
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8914
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Implement bdev_nvme_reset_controller rpc, which allows the NVMe
controller to be reset over RPC. Implement bdev_nvme_reset_rpc()
which starts the reset of the controller and returns the result of
the controller reset via the callback function after it completes.
Signed-off-by: Jonathan Teh <jonathan.teh@mayadata.io>
Change-Id: Id98d5e56feb315b7e44e9bb5e5f495e9b1cd1de0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8456
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Some packages include versioning in their name which is not very
friendly in case given package is upgraded - the name of the package
will always change in such a case. To avoid that, use globbing to
match on package names in a more robust way.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I3e23fc8a06f93471f47835e945c24c4a95f80795
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8741
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add exceptions to results parsing and fio run functions
to better inform what's the cause of the failure.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I94e51cb8f77515f7d26a75501011d6111820ae56
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8742
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Enable "kernel_engine" option for Kernel Initiator
class to enable ability to use io_uring engine on
initiator side.
For NVMe-oF this has limitations as apparently it's
not possible to enable polling on the initiator side,
which in turn makes fio "hipri" option also not
possible to use.
Adding #TODO sections with notes in case this is
later fixed in Kernel NVMe driver.
Signed-off-by: wawryk <maciejx.wawryk@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I31da52946692015237263abc77d8425b5eae5b98
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8134
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch is used to add the support for users to configure
use kernel or userspace idxd library.
Change-Id: Ie159b897bc9595894ad8f333168efaea6c2a3d78
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7332
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Now that we've deprecated the RPCs for a release, we can remove the whole
library.
Change-Id: I0f1a357fcfb3404efac39aa021928841c2f22ff1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4305
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
It's useful to determine what's being sent out to the server. This
may be relevant for e.g. openstack tests where currently it's hard
to see what tempest|cinder is actually doing, SPDK-wise, during the
tests.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ie32781621317dd65e3f6fbcfd5110e7dac337f04
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8489
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Since the trace files can get very large (several GBs), parsing them
using python's json module might require an unfeasible amount of memory,
as it needs to load the whole file first. The ijson [1] library
provides interfaces for parsing files iteratively, only loading a small
portion of a file at a time.
It requires the input JSON to have the tsc_rate and the definitions of
the tracepoints listed before the tracepoint entries. It's not a big
deal, as this is the way `spdk_trace` generates it, but it's worth
noting, as passing that file through something like `jq -S` might make
it unreadable to the trace script.
[1] https://pypi.org/project/ijson
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I03c0c3fb47091da615a3978b8d63edf4d876b811
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8275
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
This patch adds support for annotating qpairs. The raw pointer values
are replaced with a list of various properties of a qpair collected by
the bpftrace script.
A line like this:
`0 2856282624.000 RDMA_REQ_NEW id: r3256 qpair: 0x26ba550`
becomes (the line was only broken here):
`0 2856282502.669 RDMA_REQ_NEW id: r3256 qpair(ptr=0x26ba550, thread=2, qid=0, \
subnqn=nqn.2016-06.io.spdk:cnode1, \
hostnqn=nqn.2014-08.org.nvmexpress:uuid:729783b4ab38485d8d767b7741108a8)`
To annotate a trace, one first needs to enable and record the DTrace
probes:
```
$ scripts/bpf/trace.py --record `pidof spdk_tgt` > bpftraces
^C
```
Of course, the probe events are only recorded when the script is
executing, so in order to generate the annotations properly, it must be
started before the annotated objects are created. For instance, for
NVMeoF, it needs to be running before a connection is made.
After the BPF probes are recored, the traces can be annotated:
```
$ build/bin/spdk_trace -p `pidof spdk_tgt` -s spdk_tgt -j | \
scripts/bpf/trace.py -b bpftraces
```
For now, the script only annotates traces from the rdma module, as it's
the only one with tracpoints recording qpair pointers now, but it could
be extended to support more tracepoints.
Similarly, more objects could be annotated in the future by extending
the `SPDKObject` class and defining additional DTrace probe points.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I2225f4b1ab266b41af561b5e7d942411cd0c13c1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8107
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch introduces definitions responsible for generating bpftrace
scripts and parsing its output. That output will be used in subsequent
patches to provide annotations for SPDK traces.
The script has a hardcoded set of probe points that are used to generate
the bpftrace script. They're also checked against the probes present in
code to sanitize them and make sure that they're in sync.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I1b8c95e1a035bd7affed2c44b056828a5da94abd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8106
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
also remove out of support fedora31
Signed-off-by: wawryk <maciejx.wawryk@intel.com>
Change-Id: I2ec224a3fb3849eb62ba46a01aa74c62926174f8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8461
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Use extended regexp to resolve any potential ambiguity with matching
on '('. This should fix the following failure as seen on the CI:
fatal: command line, '^SPDK_RPC_REGISTER\(': Unmatched ( or \(
Also, since errexit doesn't see failures inside the process
substitution make sure we return from the function with a proper $rc
in case git fails early on.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ia03095e9cc8cf11602dafb5bef28265abb485704
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8577
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These are currently prone to false-positives especially in terms of
scoping. Consider the following:
foo() {
local bar=(42)
echo "${bar[*]}"
}
bar=43
foo
echo "$bar"
Some versions of shellcheck, including the latest, 0.7.2, complain
about $bar being reused as a plain string here. This is incorrect
since foo() holds its own copy of bar[@] hence the assignment which
takes place outside of it doesn't affect its content.
SC2178 can be mitigated be reversing the order of declaration:
bar=43
foo() { ... }
...
but the SC2128 still remains.
Currently, in our code majority of these warnings are coming from
false-positives due to initial source'ing which most of our test
scripts do (e.g. they fetch a function where local bar=() is used
and in the test itself $bar happens to be assigned a plain string.
This is still valid code).
To mitigate, disable these directives untill shellcheck is capable
of properly interpreting scoping when checking them.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ifbde973eae6e261d79e1c340eb28644bce5f4e45
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8503
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SC2030: Modification of var is local (to subshell caused by pipeline)
This directive is raised since the for loop (or rather its contents)
is piped through to another process. In this context it's not harmful
since we are interested only in sending the stdout but since we operate
on variables that happen to be local to the process that handles the
loop shellcheck sees that as a potential issue. To make it happy
remove the pipe and sort pci addresses prior running the loop.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I835c5ac1da9012129c5d01d62880307f70caab1b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8501
Community-CI: Mellanox Build Bot
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a first commit in the series addressing potential Bash issues
as discovered by the latest shellcheck release (0.7.2, shipped with
the very latest fedora33 and fedora34). The goal is to either fix,
locally or globally disable given directive(s).
SC2155: Declare and assign separately to avoid masking return values
Simplify the setting of the variable pointing at the root of the repo.
Also, keep it consistent with the rest of the scripts and declare it as
$rootdir.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I63e0b1a85ce16f7983e9ba6dd985046e8a39a650
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8500
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
On my system, the git grep for ^SPDK_RPC_REGISTER(
fails because the ( is unmatched. It seems we should
escape it, although clearly our CI systems don't seem
to require it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6412e27e79488616743f76b2d9eac8f62b996078
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8393
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This script will use the output generated by the spdk_trace app (JSON) and
replace some of the raw pointers with the information gathered through
the DTrace probes.
For now, this only prints out the traces without doing any annotations,
so the output should be nearly identical to what's printed by
spdk_trace. The annotations will be added in subsequent patches.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I406e8d4fde9cb88b31c38aa96f11b88e607e9436
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8105
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This will allow to match and compare the DTrace probes with SPDK traces
as they'll be using the same source for the timestamps.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I686c3351428c75f9b618a1a909836504fccad828
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8101
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Fix json config file using strip_size error, and
The strip_size parameter was changed to strip_size_kb in `bdev_raid_create`
rpc function in order to make it more meaningful to users.
Unify the coding style in rpc help file.
using --strip-size-kb --raid-level ... instead of --strip-size_kb.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I341af1034c7ea6716ff839bb524ee733c9e0cd34
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8401
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add three parameters, pdu_pool_size, immediate_data_pool_size, and
data_out_pool_size to the RPC iscsi_set_options to run iSCSI target
with little memory.
For some use cases, we want to keep the max number of connections,
but simultaneously we want to reduce the pool size and let I/Os wait
until resource is provided.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I74dc785310b1d985f3e338c1e13fba3a3840d113
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8191
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
As of latest qemu (>= 6.0.0) these can now be used together as
different BARs are used to accommodate for both.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Icf32f491fd33ef733f0d946f9b5caaeb87137d28
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8217
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Having pmr_cmdline set to nil was for some reason breaking cmb setup
as weirdly enough pmr_cmdline was ending up being set to "true".
Avoid this by having pmr_cmdline set to some value, empty string in
this case.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ib41da699dcc2f213f0b18d21be3fd32f398bae41
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8216
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The traces are tracking the lifecycle of a poll group: creating it,
adding and disconnecting qpairs, and finally destroying the group.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I075b7f24d14b8fbb42bb18ddd70a668a8bace118
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7158
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also add scripts/bpf/nvmf.bt to enable and log these
probes.
This patch also adds a script that can generate
a bpftrace script snippet with string maps for
needed enumerations (currently nvmf_tgt_state and
spdk_nvmf_subsystem_state). This allows us to
dynamically generate this from the source code, and
can be extended for other enums we may want to
add in the future.
Thanks to Michal Berger for converting my original
gen_enums.py script into gen_enums.sh!
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Iff34a6218aef40055ac14932eea5fc00e1c8bcf5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7194
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Source Windows specific definitions from common.sh. These adjust
uname to report the operating system as WSL, Msys or Cygwin and the
kernel name as Windows. They also define kill() to invoke the SIGTERM
handler before causing a hard stop with TerminateProcess.
Adjust the ordering of the 'source' commands in autotest_common.sh so
that the config definitions are available when common.sh is loaded.
Define MAKE, MAKEFLAGS and HUGEMEM for Windows.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: I130b892ee55c925a0b033bda271a29133993afb7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7101
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Change-Id: Ie46df6e4f52b59941a90eeb786954fe7d5f1d089
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8040
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is to make sure we sync devices for both nvmf and iscsi
protocols.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ifec6cc2d240a5b22b73e9f4087ae328568e4fe4a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8042
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Purpose: Let the users know the current available registered Rados
cluster and the related info.
Change-Id: I115c129ae6e4b0372579aad168fd88f8be136357
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7990
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In case the addr argument was not an existing unix socket file the rpc
client would consider it to be an actual ip address. As a result
connect() would be called with improper set of arguments. This could
cause the rpc.py to block for undesired amount of time until connect()
finally decided to return (seen on some fedora33 builds).
This was affecting sh wrapper functions like waitforlisten() which
use rpc.py to determine if given app is ready to be talk to blocking
execution of the tests for way too long then intendent.
To avoid such a scenario determine the format of the address and use
routines proper for given address family.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Iaac701d72c772629fa7c6478ff4781b0c5d485d5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7777
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
The openstack tests require to have one interface available under
specific ip, 10.0.2.15. This ip is a first lease VM receives from
the user network which is preconfigured in libvirt environment.
Use this instead of defining completely separate network which
by the very default will serve its own DHCP service as well. This
may result in a cosmetic issues (e.g. two ips, static one and
dynamic one on the interface) of having inconsistent config on the
VM depending on how the net device is configured by the underlying
distribution.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ie3da26eebcfb0de668166c4a0120c65aec104540
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7441
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
nvmf_subsystem_add_listener() in rpc/nvmf was modified
by 64debe0453 and the
change was not reflected in performance scripts.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I7bb8c39ab225421964e37883aa7b0f824e8df683
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7978
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This script counts how many times each syscall
is called by the SPDK application.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ife5efccee73e407e1d819293786f2acdfa317f78
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7713
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This script captures a histogram of the returned values
from the readv syscall. It can be useful for analyzing
the efficiency of our sock/posix implementation.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I910eb2e81e3416855cda7a3854982cd02476850e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7712
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This script tracks spdk_thread_send_msg and
spdk_for_each_channel calls. It also uses usym
to get the name of the function pointer passed to
these calls.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia0cf5b50538bd26a3e15e35cbab765fe3c327c73
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7711
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This script simplifies execution of bpftrace scripts
for SPDK application analysis. The script should be
invoked as:
scripts/bpftrace.sh `pidof spdk_tgt` script.bt
where 'script.bt' is the name of the bpftrace script
you wish to execute.
The script helps simplify the following:
1) replace __EXE__ markers in the bpftrace script with
the full path of the spdk executable (required for
usdt probes); it uses /proc/<pid>/exe to get the
full path
2) replace __PID__ markers in the bpftrace script with
the PID of the spdk process under analysis - this
allows for doing things like filtering system call
counts for just the SPDK process
3) invoke bpftrace with the -p <pid> option
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib271f26efe4ba326d951a7b30f61b22be755dda7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7710
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For now, we will keep this disabled by default,
enable with --with-usdt option to the configure
script. Long-term we will want to enable this by
default, and only disable via configure.
Modules can include spdk_internal/usdt.h and add
probes such as:
SPDK_DTRACE_PROBE2(probe_name, ptr, val);
When USDT is enabled, these will translate to
DTRACE_PROBE2(spdk, probe_name, ptr, val). When
USDT is disabled, these will translate to nothing.
Later patches will add some probe points to the
nvmf target, some bpftrace scripts, and instructions
for how to successfully capture data with these
probe points and scripts.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id168e2c800fa5522815a175026386319014cfdaa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7173
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Additionally, include the first resolved alias of the module.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I71c7c15398ea36f3dea3340f5c98568ff6b6a68a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7848
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Added 'rate_iops' FIO option to the performance scripts.
This will be used during tests where limiting factor
has to be artifically imposed, rather than come from
the target/initiator system or enviroment.
One case for this are scheduler tests, to limit
each connection and balance the threads accordingly.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I10bb09be9205a8b7ba90b36cd4e0bf922b0ecbc3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7840
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Revise bdev_rbd_create rpc call to add an optional
parameter "--cluster-name", e.g., "--cluster-name Rados".
Then users can create a rbd bdev with registered
Rados Cluster. This shared strategy can be used to
remove the thread creation overhead if multiple rbds
are connected to the same Ceph cluster.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ide5800f8fc6b2074805272a59731c666fe279b9a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7584
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch is used to add two rpc calls:
bdev_rbd_register_cluster
bdev_rbd_unregister_cluster
Then in the next patch, rbd bdev constructed on the same cluster object
can share the common Rados_t structure in order to remove the thread creation
overhead and improve the scalability.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I898cc4ffabb8e6721ba5bef099cbf948c64d2c98
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7551
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Current `test -f` never succeeds, because `/dev/cpu/0/msr` is a
character device file.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Iaa28f04866ab24140668ad43351a37f0ccccef65
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7166
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is needed before we can start looking up attributes
of the block subsystem under sysfs. In some occasions they
may simply not exist yet at a given time.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I4261d17e92e02acec31b8affaccd0aa11c2b851e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7863
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add {min,max}_cntlid to spdk_nvmf_subsystem, defaulting to 1 and
0xFFEF, respectively, and add nvmf_subsystem_set_cntlid_range() to
allow the controller range to be configured in the range [min_cntlid,
max_cntlid].
Also add {min,max}_cntlid to the nvmf_create_subsystem RPC to allow
the controller ID range to be specified when creating an nvmf
subsystem.
Signed-off-by: Jonathan Teh <jonathan.teh@mayadata.io>
Change-Id: I936db3bb0c9a38569063a6fd3c11df262dfad776
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7322
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
With https://review.spdk.io/gerrit/c/spdk/spdk/+/7684 there are no
more active uses of it in the test suites.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: If6f8227b68f1fe1a4038cec2b6107eac82ad44de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7698
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
fio.py simply wraps itself around fio and doesn't do anything that
would require python to be in use. Having it in a simple bash form
makes it easier to integrate it with autotest's common sh tooling
and to debug any potential issues with the underlying tests.
This also fixes#1919 by making sure only proper nvme devices are
selected for the nvmf targets.
Fixes: #1919.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I111d00df3c7b2517f431cae865e258a665c2ecb3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7684
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The changes in the nvmf_create_transport show
how this command parser work. And there have
two benefit for this changed.
1. Simplify the definition of rpc method. no need add
so many args anymore. Also it retains its original
functions, so we can also check the input args.
2. Make the rpc call more versatile, for example.
when user extend the subparsers(add new args
into subparsers), they can pass some private args
into the rpc method by command parser.
Signed-off-by: jiaqizho <jiaqi.zhou@intel.com>
Change-Id: Iaf916e3454f23715cf9216794bb80c65b2b4603f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6652
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Older version wasn't providing full support for PMR setup, this one
does.
Rewrite get-pmr such that it supports CMB/PMR sizes greater than 4GB.
Also, since CMB and PMR can coexist in newer versions of qemu try to
detect both under single device.
E.g.:
nvme0:0000:00:04.0:64-bit:prefetchable:0x700000000:0x707ffffff:0x08000000:cmb
nvme0:0000:00:04.0:64-bit:prefetchable:0x400000000:0x5ffffffff:0x200000000:pmr
nvme1:0000:00:05.0:64-bit:prefetchable:0x708000000:0x70fffffff:0x08000000:cmb
nvme2:0000:00:06.0:64-bit:prefetchable:0x600000000:0x6ffffffff:0x100000000:cmb
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ic159f5c12d3ef39db77617f7d64f825356c255a4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7539
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When zcero copy send is enabled and used by initiator,
it could significantly increase latency in some payloads.
To enable more fine graing configuration of zero copy
send feature, add new parameters enable_zerocopy_send_server
and enable_zerocopy_send_client to spdk_sock_impl_opts to
enable/disable zcopy for specific type of sockets.
Exisiting enable_zerocopy_send parameter affects all types
of sockets.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I111c75608f8826980a56e210c076ab8ff16ddbdc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7457
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
All JSON-RPCs must be documented in jsonrpc.md
Change-Id: Iec9119a01433fd0cbe4df4477ce94cc2feeb0d54
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4074
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Community-CI: Mellanox Build Bot
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I9b9f8c9e407425fdab1e84050354481ad76c19c2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6655
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Rename to target_nic_ip to better match NVMe-oF
terminology.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I0644410cfb063eeea740c54f5860aeefdb52d52d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7089
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
SPDK directory needs to be copied to initiator systems
earlier for set_irq_affinity to run.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I0f9ade02e58c9224e0b2ddc75117baaf653be614
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6776
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Need more investigating how to properly enable ADQ
for Kernel mode. Do not run Kernel + ADQ configuration
for now.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I700ef417b9b398c067a586a1a5ad9947a92057ad
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6566
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Readme was frequently missed when adding new stuff or
updating the performance script, and it is out of date.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I1710473be576ffbcc2fa8e3701b196bd46cf6654
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6538
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Create a default traffic class (tc0) with minimum
needed number of assigned threads and a priority class
(tc1) with number of assigned threads equal to
number of application threads.
Finally run set_xps_rxqs to configure symmertic queues.
set_xps_rxqs script used from Intel ICE driver
package available at:
https://downloadcenter.intel.com/download/29746/
Intel-Network-Adapter-Driver-for-E810-Series-Devices-under-Linux-
Change-Id: Ie0f2db266621a9dabb1621344bfdc5fa64fee03c
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6537
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
There are multiple cases for counting number of CPU threads
on Initiator side. Keep track of num_cores in all of them.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I4b8d1d79a2aa17706d206b149c1c8e8816ae2ef5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6536
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Set busy_poll to 0 for non-ADQ. Having it enabled with
this value results is huge latency increase.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ic68ed2b7dc19b8d4b274ce8622194489693863cb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7480
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
ld on some distros, e.g., ubuntu1604, doesn't include this particular
path in its SEARCH_DIR list. Add it manually to make sure linking
towards liburing is possible in such a case.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I82d7ed870ec9ff257dc72a386f950addb5476d1b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7022
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Added mainly to verify if the PMR setup on the VM is correct.
Example of an output with PMR device size of 32M configured for
two nvme devices, and one nvme device with 128M CMB.
[root@fedora31-cloud-1614680581-9ba06c102 ~]# /tmp/get-pmr
nvme0:0000:00:04.0:64-bit:prefetchable:0xf0000000:0xf7ffffff:0x08000000:cmb
nvme1:0000:00:05.0:64-bit:prefetchable:0xf8000000:0xf9ffffff:0x02000000:pmr
nvme2:0000:00:06.0:64-bit:prefetchable:0xfa000000:0xfbffffff:0x02000000:pmr
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I522cebd8b5a16f8a37c6e0e01a0288fb310467fb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7019
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Available in qemu >= 5.1.0. Note that since CMB and PMR share the same
BAR they cannot be used together. If both are specified, PMR setup is
skipped.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ia0c6681b5ac7563efc6c32d2fff1808814196676
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7018
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
-x is supported since 0.4.0 release, make a note of that.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Icc64132536c18108029f6c5fa2cbdd5b27018d8b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7417
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Change-Id: I4ed583d91ae9e820be1ee6f4553f29d6650c4922
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5791
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
num_cores name was misleading, as the parameter actually
contained core mask (or core list). Create separate
class attributes with core mask and number of cores.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ibfae7770aea2f2c1c720abf567400deb50028ab4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6535
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Save info about subsystems created subsystems (target
side) and remote subsystems (initiator side) into
a list.
Change-Id: I7ec1c6a4d1f75060b69b68e0b8e0dd61789fc9e0
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6374
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Run set_irq_affinity script after irqbalance service
is disabled and manually tune IRQs to be run only on
the CPUs local to NIC NUMA node.
set_irq_affinit.sh script must be manually downloaded
as part of https://github.com/Mellanox/mlnx-tools/tree/master/ofed_scripts
package before running tests.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I67b3c851bcf283caea29ad36f6d4bc0322ca0d27
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6534
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
In performance tests always use best performance policy.
Previously this was manually managed on test systems,
but it's better to do this automatically every time.
Change-Id: Iff81863cf8d9cc713a3c4cce1d8edf7ebbf81c84
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6373
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Modify CPU power management settings to achieve high,
consistent results.
Change-Id: I3602ae7523c5b83878238928caaeb453f7d2533e
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6372
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Tune sysctl parameters for TCP testing. Restore previous
settings after tests have finished. For ADQ-enabled tests
also set proper value for busy_read option.
Commit includes a fix to initiator exec_cmd() method to
allow using command parameters which contains whitespace,
otherwise it's not possible to set some of sysctl params.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I3376b69b8d7c0d8a282765db4fe55824f55f9e05
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6265
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Disable all unnecessary services which might affect
tests performance.
Managing services implemented in a very simplified way
usign subprocess and configparser modules (because json
output is not available). Proper implementation would
need to use a proper dBus API, but this seems like an
overkill for such a script.
Change-Id: I72feec4293b77442a9d2c9b4afaa032df1c4d5e1
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6264
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Configure NIC settings as per ADQ configuration guide.
Change-Id: I957aada267474c2a1448c89a1b7c81d4dd261ca6
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6263
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: If2784b74ece6c48b81cc53e63412cd2bc618ffef
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6262
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use common method name and parameters for calling
subprocesses for local (Target) and remote systems
(Initiators) instead of using "check_output" (from
subprocess module) and "exec_command" (from paramiko)
separately.
Having these functions wrapped by a single common
method will allow to create common methods in Server
class more eaisly, instead of creating two copies in
Target and Initiator classes.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I1c10f6a88f3d7300c227e969ad6fd901763ac52c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6261
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Parse the config file for "adq_enable" flag and enable
the option in SPDK Target and SPDK Initiator configuration.
At this point the flag has no effect on the generated
traffic, as the system and priority queues are not
configured properly. These settings will be added
gradually in following patches.
Change-Id: I5d7bc892f3aa7bbe691b7e0983294b56fcf994f5
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6260
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Get detailed info about NICs installed in servers. This
is using lshw utility to make things easier and not
implement the whole logic for parsing /sys objects and
pci.ids listing in system.
Change-Id: I97871fdc9feaae1c2485574a7b488b88ac3afc4f
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6259
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
The number of options for test execution grew high,
and we still need to add more. This results in a lot
of parameters to pass around in constructors, which
is hard to read and causes pylint to complain.
Instead of passing each option individually as a
separate parameter, pass them as dictionaries just
like they're defined in .json config file. This
makes managing the default values a bit harder, but
is more readable.
Change-Id: I5d88a2b7fe51d2df93edd9130678a937d34facdd
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6207
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
