This was a remnant from ages ago when we had rte_vhost
DPDK code copied into our repo. We actually have a file
named rte_vhost_user.c which is not DPDK code that was
getting excluded from astyle checking.
So this also includes the astyle violations that had
crept into this file. In a couple of places, change
the enum return type to int, this reduces astyle
confusion on function and if brace style.
Same applies to POSIX include checking - we don't need
to exclude rte_vhost_user.c from this either.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If3a25011ad54c694c15a91f7be66d862c765c5db
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14688
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Delete bit masks from trace help (found inside
build/bin/spdk_tgt -h help text), as they do not
provide useful information, are much harder to
remember and use, and migh leave user confused.
Since we provide trace group names anyway, bit masks
are excessive.
Change --tpoint-group-mask parameter name to
--tpoint-group, because we do not provide
bit masks anymore.
Drop "default" tpoint group mask from help text,
since it does not enable any tracepoints and
may confuse the user.
Change-Id: I2ca780883dfa7822e76523e9ba1fc65a7bfe5a99
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14656
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
OpenEuler Linux although is not compatible with RHEL, but it uses the
same package manager DNF as RHEL and references the package naming of
RHEL.
OpenEuler Linux is becoming the mainstream linux distro in China. So
adding support for it makes sense. For more details about it see:
https://www.openeuler.org/en/.
Fixes: #2713
Change-Id: Ife38a1f897bf6170a0c3ed0a5238ceda018a41f2
Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14639
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: wanghailiang <hailiangx.e.wang@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Make "BEGIN {" start from a new line, or if there is some annotation
at the end of bpftrace script file, "BEGIN {" will be commented out,
like "//end of fileBEGIN {", then it reports "syntax error, unexpected
map, expecting {".
Change-Id: I1495e555834c1b3c28df011dcdbaa1420c14a5df
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14641
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
A new RPC perform_tests has been added.
This request will help us avoid reading hotplug generated
logs, and instead we can stop hotplug right before
it begins generating IO, and resume it when the test
scripts are ready.
Additionally a new command line option has been added
to the hotplug application "--wait-for-rpc", which
indicates that hotplug should wait for
perform_tests RPC before starting its IO.
Change-Id: I71ca148201854ac155cc2a61171a4fb5fc427a19
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13962
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Get full regex match using ".group(0)" method.
Otherwise a non-iterable MatchObject is passed
to get_route_nic_numa() which causes an exception.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ief8b08387e4233d42b5ac32bd4d7394596aabd78
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14649
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
dpdk_mem_info.py script is used to parse output of
env_dpdk_get_mem_stats RPC.
Prior to this patch, last memzone to be found
was not added to the list.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia05e5b8fa7d756eb339c951e16321bd8ed0d99c7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14080
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
For each generated fio job section "filename=" field try
to figure out what's the most dominant NUMA node in use
and use it for fio "numa_cpu_nodes" and "numa_mem_policy"
settings.
Change-Id: I96fda436dda8d4009dc191bf7c0c836e5b53a1a3
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13514
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This use case was missed during the initial refactor introduced via
008f8a8617. CI depends on it so allow to specify the target location
of the fio configuration and allow to skip call to the main perf
wrapper.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ie41f9db40769980047f42475ce74e61c374c364c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14590
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use fio "offset", "offset_increment" and "size" to
split target file into chunks, so that each fio
job clone (specified by "numjobs") gets it's own
part of the disk to work with.
This is especially helpful in case of sequential
workloads run with numjobs > 1 and helps to keep
the workload to being as close to sequential as
possible.
Change-Id: I1ca88ae56136d22cf396f464d78b05eff5c07a2a
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13515
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is consistent with the use of terms in other parts of SPDK and fits
with the code living under module/
Change-Id: If182f7cf2d160d57443a1b5f24e0065f191b59b2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13919
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add gathering of some performance counters and RPC for printing them.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I2e77d37fb66459240ff2e241f2b1f77c60f4eef4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13390
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently these packages are installed through (sometimes weak)
dependencies. Install them explicitly instead.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I5d8f7c92be4a74028ce028eef33ec4ac6d2ad792
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14447
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Use collect-bmc-pm to gather power usage stats during fio workloads.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I20d1f3009c8a32c3927ad2cf2f932a8e97d3e7c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14164
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This script is a wrapper around ipmitool which attempts to extract
power statistics from the BMC. It's mainly based around DCMI spec
to make sure it's common for most of the platforms that we use
in our CI. If given BMC does not conform to DCMI, there's a fallback
in place which attempts to find proper sensor in the SDR which may
report overall power usage of the underlying system.
By default, current ("NOW") reading is extracted in context of DCMI.
Different intervals may be defined, and when matched with supported
averaging time periods, special version of the command will be used
to extract additional avg, min, max information for given time (e.g.
current, max, min, avg readings from last 1m). For the SDR fallback,
only current reading can be extracted.
When terminated, script dumps all readings + their averaged value
into separate .txt files.
Change-Id: Ifc8c1defe862254864d69de7edf5cce635aff258
Signed-off-by: Michal Berger <michal.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14144
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch defines the interface for crypto engines, which provide
support for configuring crypto on a given volume. Only a single crypto
engine can be active at a time and it's selected in the "crypto" section
of the config file. Similarly to device managers, external crypto
engines can be loaded from plugins.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Id942ef876e070816827d7ad1937eb510a85c8f8d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13869
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <sebastian.brzezinka@intel.com>
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I96df5f21f04b9196083f91783f8dd9cc4c6920d1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13688
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
$fio_extra_conf can either point at an existing file or be an
attached stdin the fio_conf() should read from.
Signed-off-by: Michal Berger <michallinuxstuff@gmail.com>
Change-Id: If902262b0100fb056491928b3f667ab15e6e0024
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12429
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The wrapper glues execution of the perf/vhost tests in as simple form
as possible. The arguments are meant to be passed either via env or
the cmdline in a keyworded argument fashion. All defaults are
embedded inside the configuration which is built by the wrapper
itself.
https://trello.com/c/HSoRtQkO/401-deprecate-vhost-performance-python-helper-script
Signed-off-by: Michal Berger <michallinuxstuff@gmail.com>
Change-Id: Iad94bfdd65cb8871b819351ddae65e647621fb30
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12400
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Adding `psk` field to `spdk_nvme_ctrlr_opts`
Adding `psk` parameter to `bdev_nvme_attach_controller` RPC
Change-Id: Ie6f0d8b04ce472e6153934e985c026acded6cdfc
Signed-off-by: Boris Glimcher <Boris.Glimcher@emc.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14046
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Trim is now also available as a management operation via RPC.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I05b778a611e9809a14bfed50b01986bb4649a35c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13379
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
the current timeout parameter of the interface bdev_iscsi_set_opts is
duplicated with the timeout parameter of the JSONRPCClient parameter,
which may cause the iscsi timeout and JSONRPCClient parameters to
overwrite each other.
Signed-off-by: gongwei <gongwei833x@gmail.com>
Change-Id: I96604a7e1a495ac2e99518812297230680df42fd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14306
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Make sure needed drivers are loaded before we start
the test.
Change-Id: I93e16a2266f99e7bfa6fffaede460c6230659872
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13616
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Update PCM binary paths and executable names are these have
changed some time ago.
Update README.md with an explanation about int variables
for "pcm_settings" option.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I8270766ff2c429623a29e4c12427a3dd7e45f229
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13511
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
If SIGTERM does not work - use SIGKILL and clean up
any remaining socket files.
Change-Id: I1a4f2e49a8a43f3eed19e09e16d4ee3420cd31f7
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13739
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
"num_jobs" is described as required parameter in README.md
but not included in example configuration file.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I1077d027d6c7dbee49afa1df4345b4dd478b5ad6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13615
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Use posix sockets by default when running tests.
For now we only want to test with this socket type
and ssl socket support may be added later if needed.
Change-Id: If8b125518cf1c01a841276b58fa7ca7799aeb229
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14353
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
L2P cache allows for partial storing of L2P in memory, paging in and out
as necessary, lowering the total memory consumption.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I727fec9d2f0ade4ca73e872d62a2ec10cfdb0a88
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13353
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added a new RPC, vmd_rescan, that forces the VMD driver to do a rescan
of all devices behind the VMD. A device that was previously removed via
spdk_vmd_remove_device() will be found again during vmd_rescan.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ide87eb44c1d6d524234820dc07c78ba5b8bcd3ad
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13958
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tom Nabarro <tom.nabarro@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added new RPC, vmd_remove_device, that allows users to remove a PCI
device managed by the VMD library simulating a hot-remove.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ifb84818ce8d147d1d586b52590527e85fe9c10de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13957
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tom Nabarro <tom.nabarro@intel.com>
The new name is consistent with the naming scheme of
<subsystem>_<action> that all of our other RPCs use.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I2cae7af5715add8eba26501cd192a6ac4884ec69
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13952
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Tom Nabarro <tom.nabarro@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Adds API for fast shutdown - the ability for FTL to skip most
of the metadata persists made during clean shutdown, and relying
on their representation in shared memory instead. This allows for
faster update of SPDK (or just FTL, assuming no metadata changes),
with downtime reduction from 2-5 seconds to 500-1000 ms (for
14TiB+800GiB base and cache drives).
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I5999d31698a81512db8d5893eabee7b505c80d06
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13348
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Do not print messages in case rake or bundler
are not found.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I92145a409af0ae95bc9ae194c7830feabd3a4641
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14155
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This commmit introduces a new bdev type backed up by DAOS DFS.
Design wise this bdev is a file named as the bdev itself in the DAOS POSIX
container that uses daos event queue per io channel.
Having an event queue per io channel is showing the best IO throughput.
The implementation uses the independent pool and container connections per
device's channel for the best IO throughput.
The semantic of usage is the same as any other bdev type.
To build SPDK with daos support, daos-devel package has to be installed.
The current supported DAOS version is v2.X, please see the installatoin and
setup guide here: https://docs.daos.io/v2.0/
$ ./configure --with-daos
To run it, the target machine should have daos_agent up and running, as
well as the pool and POSIX container ready to use, please see the
detailed requirements here: https://docs.daos.io/v2.0/admin/hardware/.
To export bdev over tcp:
$ ./nvmf_tgt &
$ ./scripts/rpc.py nvmf_create_transport -t TCP -u 2097152 -i 2097152
$ ./scripts/rpc.py bdev_daos_create daosdev0 <pool-label> <cont-label>
1048576 4096
$ ./scripts/rpc.py nvmf_create_subsystem nqn.2016-06.io.spdk1:cnode1 -a -s
SPDK00000000000001 -d SPDK_Virtual_Controller_1
$ ./scripts/rpc.py nvmf_subsystem_add_ns nqn.2016-06.io.spdk1:cnode1
daosdev0
$ ./scripts/rpc.py nvmf_subsystem_add_listener nqn.2016-06.io.spdk1:cnode1
-t tcp -a <IP> -s 4420
On the initiator side, make sure that `nvme-tcp` module is loaded then
connect drives, for instance:
$ nvme connect-all -t tcp -a 172.31.91.61 -s 4420
$ nvme list
Signed-off-by: Denis Barakhtanov <denis.barahtanov@croit.io>
Change-Id: I51945465122e0fb96de4326db742169419966806
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12260
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This allows mapping an nvme_request back to the
nvme_bdev_io.
This requires bumping up the max number of arguments per
tracepoint. 5 was previously chosen as max since it
exactly fit in 64 bytes (1 cacheline) when all
arguments were stored as uint64_t, but now that we
support uint32_t arguments we can afford extra
arguments when some of them are uint32_t. I've
bumped it to 8 so we can avoid having to touch
this value multiple times if we find some cases
where we need 7 or 8 args.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie2ef5e59d10549860b47542e68c1c34efa63047f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13995
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This option determines if underlying nvme device must be zoned.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I65cb91db81d4c5ce694010db2e79e8af389687ab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14008
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
glibc 2.36 added arc4random(), which breaks
the SPDK iSCSI build since it always implements its
own arc4random() implementation on non-FreeBSD OS
(meaning always on Linux).
So instead add a CONFIG_HAVE_ARC4RANDOM and remove
the explicit FreeBSD dependency - this will work on
FreeBSD as well as Linux with >= glibc 2.36.
Also fix check_format.sh, so that it does not
enforce spdk/stdinc.h checks on code snippets in
the configure file.
Fixes issue #2637.
Reported-by: Karl Bonde Torp <k.torp@samsung.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iab9da8ae30d62a56869530846372ffddf7138eed
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14028
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Note, this change only sets defaults for the ID/KEY,
more specific use cases like NVMe/TCP may set the ID and KEY on a per connection basis.
Also simplify PSK identity string, that isn't NVMe focused.
NVMe libraries using this will need to construct more complicated
identity strings and pass them to the sock layer.
Example:
rpc.py sock_impl_set_options -i ssl --psk-key 4321DEADBEEF1234
rpc.py sock_impl_set_options -i ssl --psk-identity psk.spdk.io
./build/examples/perf --psk-key 4321DEADBEEF1234 --psk-identity psk.spdk.io
./build/examples/hello_sock --psk-key 4321DEADBEEF1234 --psk-identity psk.spdk.io
Change-Id: I1cb5b0b706bdeafbccbc71f8320bc8e2961cbb55
Signed-off-by: Boris Glimcher <Boris.Glimcher@emc.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13759
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
This allows our setup to be more flexible - extra Vagrantfiles can
provide additional configuration which may override|extend existing
configuration without having a support for specific set of options
on our end.
CI will attempt to use this functionality to mitigate the following
issue:
https://github.com/spdk/spdk/issues/2628
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I80cbe67b2fe3618f93e9233e0586417b208f987b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13929
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Docs explaining how to use the RPC are in the next patch in the
series.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I7dab8fdbeb90cdfde8b3e916ed6d19930ad36e66
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12848
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
accel_perf and bdev_svc were not on the list.
Fixes issue #2483.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9f758c1871f42c10e2c92b2fb6cd676830a1b3a0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13877
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The RPC provides a list of initialized engine names along with
that engine's supported operations.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I59f9e5cb7aa51a6193f0bd2ec31e543a56c12f17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13745
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
In prep for upcoming patch that will provide an RPC to override
and automatic assignment of an op code to an engine.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I17d4b962fb376a77f97ce051a513679d0fba698e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12829
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
While testing fedora35 under 5.18 kernel it was noticed that the
sysfs dir structure changed comparing to older versions of the
kernel. To make sure proper devices can be found regardless of
the kernel version simplify the process by just looking up
the model of the ctrl given nvme block device is connected to.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I7ff55c8d8c50acd2a117bed2a31ddb9890615e18
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13674
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
This implementation of xNVMe BDEV module supports the char-device / ioctl-over-uring,
along with the "regular" io_uring, libaio, POSIX aio, emulated aio (via threadpools) etc.
Code changes done :
a. Addition of xNVMe submodule to SPDK
b. Modification of RPC scripts to Create / Delete xNVMe BDEVs
c. Implementation of xNVMe BDEV module
Signed-off-by: Krishna Kanth Reddy <krish.reddy@samsung.com>
Change-Id: If814ca1c784124df429d283015a6570068b44f87
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11161
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This shouldn't be an on/off option, but should expect an integer value
specyfing the number of bytes.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I888af3253ad619a6c5f86e6d35454dafe8fc09a0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13540
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This is done mainly to align the final location with the one listed
in the .pc files created for each lib.
Signed-off-by: Michal Berger <michallinuxstuff@gmail.com>
Change-Id: I99d6875c9e26f8202723dd6d73bd865b6478bcf9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12978
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Removing default options from parser command to prevent overwrite by
argparse the defaults defined in the .c files.
Signed-off-by: Jaroslaw Chachulski <jaroslawx.chachulski@intel.com>
Change-Id: I39026e0866f2a9aecda6588bb3f91ed87676ddd1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13461
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Removing default options from parser command to prevent overwrite by
argparse the defaults defined in the .c files.
Signed-off-by: Jaroslaw Chachulski <jaroslawx.chachulski@intel.com>
Change-Id: I9c1ba26e2b867b91fd5f7cd91edbff1844f08c79
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12979
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
nvmf_get_subsystems functions
Removing default options from parser command to prevent overwrite by
argparse the defaults defined in the .c files.
Signed-off-by: Jaroslaw Chachulski <jaroslawx.chachulski@intel.com>
Change-Id: Ibce4122aed1f6c4e22b6286f52f4295a4cc13e0c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13497
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Removing default options from parser command to prevent overwrite by
argparse the defaults defined in the .c files.
Signed-off-by: Jaroslaw Chachulski <jaroslawx.chachulski@intel.com>
Change-Id: I11ef4947324dfba796fc16da566c0b8a1e606a00
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12922
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Removing default options from parser command to prevent overwrite by
argparse the defaults defined in the .c files.
Signed-off-by: Jaroslaw Chachulski <jaroslawx.chachulski@intel.com>
Change-Id: I3e009139e10bbd2c9aa94e88ffdeb3a6570c4110
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12911
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Removing default options from parser command to prevent overwrite by
argparse the defaults defined in the .c files.
Signed-off-by: Jaroslaw Chachulski <jaroslawx.chachulski@intel.com>
Change-Id: I8db8ab436e15a313f8141ada14c5b60f2545266d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12894
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
This was temporarily disabled to work around a big style fix patch. It
can be enabled again now.
Change-Id: I9009d83798551545307cf5881bc1bbb87453e611
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13466
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In SPDK, declarations have the return type on the same line. Definitions
have the return type on a separate line. Astyle has an option for
enforcing this. Unfortunately, it seems to have two bugs:
1) It doesn't work correctly at all on C++ files.
2) It often fails on functions that return enums, or long type names
Deal with 1) by adjusting the check_format.sh script to only tell astyle
to fix return type line breaks for C files and not C++. Deal with 2) by
adding a few typedefs to work around the problem.
Change-Id: Idf28281466cab8411ce252d5f02ab384166790c6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13437
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
This check isn't smart enough to handle the next big formatting patch,
so disable it and then re-enable later.
Change-Id: I2d73598d6b7c43f9356562161ed116bc01361166
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13465
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
These are going to need different options in an upcoming patch.
Change-Id: I5d43f21887abefbae207b5cff23fafcfac4a33d7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13464
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Removing default options from parser command to prevent overwrite by
argparse the defaults defined in the .c files.
Signed-off-by: Jaroslaw Chachulski <jaroslawx.chachulski@intel.com>
Change-Id: I757b893a65a1c0e21310171fa8b89a87e28b87a4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12871
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
verify.state files are not very useful because
we fail the tests at any first failure.
If there was something wrong with IO verification
then autotest.sh would fail.
Fio files with metrics output (IOPS, BW, latency, etc)
are also not very useful as per-patch tests are not
focused on benchmarking.
Fixes#2546
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: I33fbe2fb0749d840f08ffe0d606d206268140991
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13019
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
grpcio, grpcio-tools modules have compilation
problem on Centos7 and are not necessary under
this OS.
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: I2b48a3b1b2deafa983adf83424940ffa6ce7d20e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13070
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Disabled installing markdownlint due to ruby
version issue.
Changed packages name according to packages
available from a repository.
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: Iea22d78dedad5386ab30d6bdd79cd7e961eaee72
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12756
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: <qun.wan@intel.com>
Also added missing single letter options from the Usage
string. Long options (such as --qemu-emulator) aren't
in the Usage string - leave them off for now, we may
want to consider just eliminating the Usage string
entirely rather than duplicating the options in
the Usage string and the option list below it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3d8b53f9395f25b07842d81a2d18c29a104b209e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13059
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
The pci address needs to interpreted "as is" (base-10) and not
converted to hexadecimal notation. Also, the number of fields also
changed where under newer pciconf, vendor and device IDs are
provided under separate fields.
Signed-off-by: Michal Berger <michallinuxstuff@gmail.com>
Change-Id: Ie540f11b9cde2dbbfe15a6aa449c4eab151c81d8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12914
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There are a few places we can replace existing license
text with SPDX license identifiers, that did not match
the auto-replacement script in the previous patch.
Make those replacements manually in this patch instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I258720c03bc2153d1c56a8adf6357f224b911c0b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12913
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Many open source projects have moved to using SPDX identifiers
to specify license information, reducing the amount of
boilerplate code in every source file. This patch replaces
the bulk of SPDK .c, .cpp and Makefiles with the BSD-3-Clause
identifier.
Almost all of these files share the exact same license text,
and this patch only modifies the files that contain the
most common license text. There can be slight variations
because the third clause contains company names - most say
"Intel Corporation", but there are instances for Nvidia,
Samsung, Eideticom and even "the copyright holder".
Used a bash script to automate replacement of the license text
with SPDX identifier which is checked into scripts/spdx.sh.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaa88ab5e92ea471691dc298cfe41ebfb5d169780
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12904
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: <qun.wan@intel.com>
Remove output directory argument for core-collector.sh when
setting system core_pattern. Instead save the full output
directory path into a file to a known location and read it
directly in core-collector.sh.
The reason for this change is 128 bytes command line length
for core_pattern (see 'man core 5'). In case working with
long paths the core_pattern command line gets truncated and
core dumps are not generated.
Change-Id: Ia74c180e4923fb43d6ff66129ffe54c32827adca
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12755
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michallinuxstuff@gmail.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There is no 'python' package, 'python3' should be used
instead
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: I8d55bf579038b9316e26e762b69e6c150869a66b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12804
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michal Berger <michallinuxstuff@gmail.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This will make it possible for out-of-tree virtio-blk transports to pass
transport-specific options when creating controllers.
Change-Id: I862f0f8096aadb5e47bbe4c1c418aaf06691e1ac
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12818
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will make it possible for out-of-tree virtio-blk transports to pass
their own, transport-specific, set of options.
Change-Id: Ic37b7fb09ca74a744c006d032638d02cc3350471
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12816
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
'opts' was a left over from debugging, it should not be present
in the RPC.
virtio-blk transports are supposed to extend the RPC with custom
JSON parameters by existing commands.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie515db192bd69baec74f7aedb93f29a1d98a0615
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12811
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
aarch64 doesn't have a msr module (DPDK acquires the TSR rate elsewhere).
Signed-off-by: Gal Hammer <gal.hammer@huawei.com>
Signed-off-by: Shai Fultheim <shai.fultheim@huawei.com>
Change-Id: Ib9795141a78436959853ab5548ae49f024344b25
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12354
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is to add core_limit parameter to scheduler by RPC.
Signed-off-by: Jaroslaw Chachulski <jaroslawx.chachulski@intel.com>
Change-Id: I0570d24e9ae67ccde64e5f996706fefd2e403086
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12623
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
These were deprecated in 2019, it's time to remove
support for them now.
Change-Id: I7d3804a84851753992af4a3a37b60dc6de0d22cb
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12780
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These were deprecated in 2019, it's time to remove
support for them now.
Change-Id: Ie50c7421f991ad0474edba0e0f339180f7afee00
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12778
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
These were deprecated in 2019, it's time to remove
support for them now.
Change-Id: Ia09368e426a83274d9c7fc90ed8b0391f4d0b67c
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12774
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds virtio_blk abstraction for custom transports,
with the 'vhost_user_blk' first one being used.
Added spdk_virtio_blk_transport_ops describing the nessecary
callbacks to be implemented by each transport.
Please use SPDK_VIRTIO_BLK_TRANSPORT_REGISTER to register the transport.
Transports can use virtio_blk_process_request() to process the
incoming I/O from their queues.
virtio_blk_create_transport RPC was added to create one of the
registered transports, possibly with custom JSON arguments.
Added 'transport' argument to vhost_create_blk_controller RPC,
to specify which transport should create the controller.
By default the vhost_user_blk transport is used.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ic9d93a6e0f483796eb56b7174a678e41a6ea4808
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9540
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These were deprecated in 2019, it's time to remove
support for them now.
Change-Id: I56dbaef56ff793e48441219e07dc6b02dda0b470
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12777
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These were deprecated in 2019, it's time to remove
support for them now.
Change-Id: I5a715e9b9e991c6febec5e505384728281eee8b7
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12773
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These were deprecated in 2019, it's time to remove
support for them now.
Change-Id: I33a497fb134320f13606b66ad55fc7b068d011d9
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12716
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These were deprecated in 2019, it's time to remove
support for them now.
Change-Id: I477da05a42ca607fbad4d178aa541726197d7c83
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12775
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These were deprecated in 2019, it's time to remove
support for them now.
Change-Id: I9e203a52877802127df8144e68090d7975f9d200
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12772
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
And associated RPC to enable.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I06785bcd8b8957293ad41d13bab556fe62f29fd5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12765
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These were deprecated in 2019, it's time to remove
support for them now.
Change-Id: I25aea510648a55d751db3740b36fb9924d1f52ed
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12747
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
In prep for upcoming addition of IAA.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I3044f1e07dbfc65a6a55a7d68bbaff6a43e909d0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12761
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
IDXD has always been used everywhere but technically it stands for
the driver, not the HW (Intel Data Streaming Accelerator Driver)
where the X comes from "Streaming Accelerator" somehow. Anyway, the
underlying hardware is just DSA. It doesn't matter much now but
upcoming patches will add support for a new HW accelerator called
the Intel In-Memory Analytics Accelerator which we'll call IAA and
it will use the same (mostly) device driver (IDXD) as DSA. So, calling
the HW what it is will lessen confusion when adding IAA support.
This patch just does renaming for the accel_fw module and associated
files (RPC, etc).
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ib3b1f982cc60359ecfea5dbcbeeb33e4d69aee6a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11984
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
As introduced in 25bc221cee:
listeners for created subsystems should also be added
to discovery subsystem.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Id37854ea9a7877eb3e4eb37675d6918ef2931e7e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12676
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
libvfio-user has switched from cmake to meson; update the submodule for
this, and switch over to building with meson.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ia0749590271d0b74260c9118692c21e2a82dde23
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12640
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch utilize generic sma implementation by adding vhost-user
devices manager. It's allow to expose virtualized block devices to
QEMU instances or other arbitrary processes.
Max device capacity depend on available `pci-bridge`
```
devices:
- name: 'vhost_blk'
params:
buses:
- name: 'pci.spdk.0'
count: 32
- name: 'pci.spdk.1'
count: 32
qmp_addr: 127.0.0.1
qmp_port: 9090
```
To attach `pci-bridge` at boot time we need to run qemu with this option
```
device pci-bridge,chassis_nr=1,id=pci.spdk.0
device pci-bridge,chassis_nr=2,id=pci.spdk.1
``
Change-Id: Idbe841b12cf59975ff0e6717f8dc905d38379357
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12207
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Artek Koltun <artsiom.koltun@intel.com>
Since SMA keeps track of attached volumes and a volume might get
disconnected at any time (in which case they're also removed from the
host side), a mechanism is needed to monitor if any of the volumes are
no longer accessible.
This patch implements that mechanism by adding a new thread running in
the background that will periodically (60s by default) send a
bdev_get_bdevs RPC and check that all previously attached volumes are
available. If any of them are not, it'll remove it and stop the
associated discovery services (if their refcount goes down to zero).
The period can be changed through the `volume_cleanup_period` variable
in the config file.
One important thing to note is that we assume that any intermittent
connection issues are handled internally by the SPDK application and a
bdev is only removed after all reconnection attempts are performed.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I5b9e63698879527d9f79156a0eda1c8bc5e66def
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12699
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch adds support for connecting volumes via discovery service.
The user specifies a volume UUID/GUID and a list of discovery endpoints,
which are then used to start the discovery service on and attach the
volume to a device.
SMA will keep track of the attached volumes and will also refcount the
connections to discovery services. So if two volumes are attached using
the same discovery endpoint, it'll be disconnected only after both of
them are detached.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ie8ea50a2a784cf0db8a5953234c6bb2b68685d7c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12413
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This will make it easier to control various options through config file.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I19ab9c020d536521f5985227bc43965bd04d2707
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12724
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Most of the devices need to send RPCs during initialization (e.g. create
a transport), so we need to take care that they're initialized only
after we are certain that the SPDK process is listening.
The mechanisim is similar to the `waitforlisten` function used in our
test scripts - it sends a series of `rpc_get_methods` calls and times
out after a period of time if no response is received. For now, the
timeout is hardcoded to 60s.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Iddadc04ad4c486d2894bc40e1a899a9d204400fc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11802
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
If the app is killed with either one of these signals, it'll shutdown
gracefully and exit with zero.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I630f9e34c3ccb382c8e1b53d0f589f3ec4d1483b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11727
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This allows a user to specify the types of devices to support. Those
not specified in the config, won't get initialized and will not service
user's requests.
Additionally, each device manager can now receive its own configuration
in its init() method.
The device configuration is structured as a list of objects with two
properties: "name" and "params". The former identifies a device to
enable, while the latter contains a set of options (if any) specific to
that device manager. For instance:
```
devices:
- name: 'nvmf-tcp'
params:
max_queue_depth: 256
io_unit_size: 8192
- name: 'nvmf-vfiouser'
```
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I967016502ad93c243b3a7af58992bde14c44953c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11713
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch adds support for loading configuration from a yaml-formatted
file. The command-line options takes precedence over those from the
config file.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Iafb5b4aec0a64afe358fce2d6c55361fc4093223
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11712
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
These were deprecated in 2019, it's time to remove
support for them now.
Change-Id: Ic80ce74344b24814dad792cfff6a4791d0430527
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12741
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We try to modprobe msr so that DPDK can more easily figure
out TSC on x86 systems. But that just results in a
"Module msr not found" message on non-x86 systems. setup.sh
still works, but the error message makes it appear
otherwise. So just redirect the error message to reduce
this confusion.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I71074c7836519b003933551ce51a193070b1bfe6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12671
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Spread out used block devices evenly between
used initiators and then between initiators NIC
interfaces, so that in result each initiator
connects to the same number of subsystems.
Previous version had problems spreading block
devices / subsystems between interfaces in case
division remainder was not 0.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I045dc9313b0613685fc997f821fe66238026a645
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12732
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Save Initiator addressing information in Target object.
This will be needed later to properly spread created
subsystems between initiators and NICs.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I9e5545b7847bb16f3ce3d0ee56038003fda74e6d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12731
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I7813a31060af7b2f9aea1b0a0d99fb699670509a
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11667
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It's now possible to register SMA device managers defined in a module
outside of the regular directory. To do that, a global variable called
`devices` containing a list of device manager classes needs to be defined
in a module that's added to SMA_PLUGINS environment variable.
For example:
```
$ cat /path/to/plugins/external_devices/__init__.py
import spdk.sma as sma
class MyDeviceManager1(sma.DeviceManager):
pass
class MyDeviceManager2(sma.DeviceManager):
pass
devices = [MyDeviceManager1, MyDeviceManager2]
$ SMA_PLUGINS=external_devices scripts/sma.py
```
Multiple plugins can be specified by separating them with a colon, e.g.:
```
SMA_PLUGINS=plugin1:plugin2
```
Of course, the location at which these modules reside must be in
PYTHONPATH.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I2bb4cfea5191710f97d66abe3a21e4deacc6338a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11412
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It's now possible to specify the gRPC interface listen address and the
SPDK-RPC socket path.
Change-Id: I957cf4ca4e03eac6f4f6f7ffab5ee95c5b6f7521
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10979
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The SMA requires some extra python packages during the build to generate
the protobuf interface, so this option will select whether it's enabled
or not. Additionally, the dependencies are added to `pkgdep.sh` in this
patch.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib0d75c86d4d8575ec1245b219b4e96edb773b366
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10974
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Storage Management Agent is a gRPC server that provides an abstraction
layer above the SPDK RPC interface. The interface aims to provide a set
of methods for managing various protocols (e.g. NVMe, virtio-blk) while
hiding the details of a particular transport.
The external API is defined by `lib/python/spdk/sma/proto/sma.proto`
protobuf file. It defines the generic gRPC service methods and their
requests/responses. Device-specific messages are defined in their own
files. This patch also defines messages for creating NVMe and NVMe/TCP
devices.
This patch implements a gRPC service that delegates the work to a
specific device type. A DeviceManager is a class that implements some
of the methods defined by the service for a given type of devices (e.g.
NVMe, virtio-blk, NVMe/TCP, etc.). For now, only the RPC for creating a
device is implemented, others are added in subsequent patches.
The series implements the generic calls as well as their NVMe/TCP
implementation. Support for other devce types could be easily added by
creating a new device manager and defining its protobuf parameter
definition.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I17cde3b31d3514878f1027cfcd112b48848f6123
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10273
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It's now possible to specify a time to wait until a connection to the
discovery controller and the NVM controllers it exposes is made.
Whenever that time is exceeded, a callback is immediately executed.
However, depending on the stage of the discovery process, we might need
to wait a while before actually stopping it (e.g. because a controller
attach is in progress). That means that a discovery service might be
visible for a while after it timed out.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I2d01837b581e0fa24c8e777730d88d990c94b1d8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12684
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
By default, failback to the preferred I/O path is done automatically
if it is restored. Some users may want to keep using the backup I/O
path even if the preferred I/O path is restored. In this case,
bdev_nvme_set_preferred_path can be used to do manual failback.
We may be able to clear/fill I/O path cache more strictly but it will
be complicated and have bugs. This patch does the minimal change,
just skips an apparent case.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I78fe5faee6ff04e88ae3d7c6be6da1c20637c912
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12431
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Always reload ICE driver after tests with ADQ enabled.
This is to reset tc qdisc and filter settings and make
sure they don't affect future tests.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I70b94ef236741fe81870954f9901e02b9b5aadb9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12622
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These were deprecated in 2019, it's time to remove
support for them now.
Change-Id: I3b75eea83bd7d700d20a6189e8fb6d1f066dc9b4
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12603
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use different file to save calculated CPU utlization
and do not modify original SAR output.
Change-Id: I415242a5610f1c2a43a038baafa8dcc4f9e8fae2
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12526
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Move sar output file generation into measure_sar
function and pass a file name prefix instead.
More than one file will be created by the function
based on that prefix.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I671887d4d232821c0de19eb338150d30201be204
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12525
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Re-phrase "waiting" message a bit and add another
message notifying that measurements are actually starting.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I55d8ed761bf45a590322cffc5b776a44774977dd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12522
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These were deprecated in 2019, it's time to remove
support for them now.
Change-Id: I32dd9960bc397244d8e3d0a384fc8b67e907bf68
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12601
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These were deprecated in 2019, it's time to remove
support for them now.
Change-Id: I6931e80c836b568dec8989dad2a7be4e112c42b4
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12577
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These were deprecated in 2019, it's time to remove
support for them now.
Fix ocf test script that was still using the
deprecated get_bdevs RPC name - change it to
bdev_get_bdevs.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7f8caedc250b80503671a0236694181613f63860
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12553
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
These were deprecated in 2019, it's time to remove
support for them now.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2c9918ed0296f644b0728c5106c47d93e3c7ec30
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12552
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
By default centos7 uses openssl-devel version 1.0.2k
The newer version 1.1.1k is available with EPEL repo
Install and use newer version 1.1 for centos7
The new 1.1 version is needed for TLSv1.3 support.
Change-Id: I489f38dd519276741ab0bb2cf7bc2d368a16387f
Signed-off-by: Boris Glimcher <Boris.Glimcher@emc.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12511
Reviewed-by: Michal Berger <michallinuxstuff@gmail.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The RPC returns a list of active discovery service connections. Each
discovery service is described by a name, its trid, and a list of
discovery service trids it refers to.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ifa4b9501dd353e7b4948ad830575a6c94dafd86b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12380
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The NVMe bdev module supported active-passive policy for multipath mode
first. By this patch, the NVMe bdev module supports active-active policy
for multipath node next. Following the Linux kernel native NVMe multipath,
the NVMe bdev module supports round robin algorithm for active-active
policy.
The multipath policy, active-passive or active-active, is managed per
nvme_bdev. The multipath policy is copied to all corresponding
nvme_bdev_channels.
Different from active-passive, active-active caches even non_optimized
path to provide load balance across multiple paths.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ie18b24db60d3da1ce2f83725b6cd3079f628f95b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12001
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
If we specify a preferred path manually for each NVMe bdev, we will
be able to realize a simple static load balancing and make the failover
more controllable in the multipath mode.
The idea is to move I/O path to the NVMe-oF controller to the head of
the list and then clear the I/O path cache for each NVMe bdev channel.
We can set the I/O path to the I/O path cache directly but it must be
conditional and make the code very complex. Hence, let find_io_path() do
that.
However, a NVMe bdev channel may be acquired after setting the preferred
path. To cover such case, sort the nvme_ns list of the NVMe bdev too.
This feature supports only multipath mode. The NVMe bdev module supports
failover mode too. However, to support the latter, the new RPC needs to
have trid as parameters and the code and the usage will be come very
complex. Add a note for such limitation.
To verify one by one exactly, add unit test.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ia51c74f530d6d7dc1f73d5b65f854967363e76b0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12262
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: <tanl12@chinatelecom.cn>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Our CI explicitly uses v3.1.0 shfmt. Other versions,
including newer versions, may suggest a lot of script
changes that are different than what v3.1.0 reports.
So change check_format.sh to *only* run shfmt
checking if the version is exactly v3.1.0.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I788961faaae7992cf1369abf1e54f4075bd2521c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12309
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Centos7: ndb package version update - version 3.14-2
of the nbd package is no longer available in
epel repository.
Updated for version 3.24-1.
Centos8: repository URL change - old ceph
repository has Centos version mismatch.
Centos8: no need to install NBD package. It is available
on the system by default.
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: Ifae0833822b270127b31fe95c14f6803f688bfc6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12156
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add an new RPC bdev_nvme_get_io_paths to query all active I/O paths.
One io_path belongs to One nvme_bdev_channel.
Each nvme_bdev_channel is associated with one nvme_bdev.
If the RPC bdev_nvme_get_io_paths has a bdev name as a parameter
it can use spdk_for_each_channel() simply for the corresponding
nvme_bdev.
However, users will want to know I/O paths of all nvme_bdevs like
the RPC bdev_get_bdevs.
One io_path has one nvme_qpair. One nvme_qpair belongs to one
nvme_poll_group. By relying on these relationships, the RPC
bdev_nvme_get_io_paths traverses all nvme_poll_groups by using
spdk_for_each_channel() to g_bdev_nvme_ctrlrs.
The RPC bdev_nvme_get_io_paths has two modes, display all or
the specified NVMe bdev's active I/O paths.
The specified bdev name is used just for comparison and empty
array is returned if no matched io_path is found.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I4a0dbf3ef7aaa9a7b7345fc03dc493cc6d37bc99
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12146
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
As per the NVMe specification, a host can identify two areas of guest
memory: one of which is used for the host-written doorbells, and one of
which contains event indexes. The host writes to the shadow doorbell
area, but also writes to the controller's BAR0 doorbell area if the
corresponding event index is crossed by the update. This avoids many
mmio exits in interrupt mode, where BAR0 doorbells are not directly
mapped into the guest VM, with greatly improved performance.
This isn't a useful feature in BAR0 doorbells are mapped into the VM, so
we explicitly disable support in that case.
NB: the Windows NVMe driver doesn't yet support this feature.
Although the specification says that the admin queues should also engage
in this behaviour, in practice, no VM does, so have to include some
hacks to account for this.
Co-authored-by: John Levon <john.levon@nutanix.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I0646b234d31fbbf9a6b85572042c6cdaf8366659
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11492
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The value of ack_timeout is calculated according to
the formula 2^(transport_ack_timeout) msec.
Signed-off-by: zhangduan <zhangd28@chinatelecom.cn>
Change-Id: I5a938635d70693ddd405fa5907555bb745b4df0f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12215
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This probe was removed from the bdev nvme module during
some recent refactoring.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I31508fb67651693e1e9c4a656e2e7111c14a8415
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12002
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
After 7610bc38d, python modules are now located in the python/
directory. That patch also updated PYTHONPATH assignment in most of the
scripts, but one of the perf script and some docs/messages were missed.
Change-Id: Iff3588526f2a382e599f5734d38fc32c15a7bf56
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12223
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use "generic" Fedora34 from Roboxes, as we did for
all other Fedora Vagrant boxes.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I208264c50a067b26c9ec5da2250f27881ba8431d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12227
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Fix pylint findings:
- R0201 Method could be a function
Signed-off-by: Pawel Piatek <pawelx.piatek@intel.com>
Change-Id: I1b9141b9ab150e20fdcd63510b484c6be514efb5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12137
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is done to make sure we don't miss more complex setups where
target devices are not mounted but still hold some valid data that
shouldn't be touched in any way.
Also, adjust function names so they clearly indicate what is being
checked.
Signed-off-by: Michal Berger <michallinuxstuff@gmail.com>
Change-Id: Ibb0f1f21de68009a2f8f1faf4595a07ae527da35
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11111
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Up until now, importing an SPDK RPC python module was just a matter of
`import rpc`. It's fine until there's another module called `rpc`
installed on the system, in which case it's impossible to import both of
them. Therefore, to avoid this problem, all of the modules were moved
to a separate directory under the "spdk" namespace.
The decision to move to a location under a separate directory was
motivated by the fact that a directory called scripts/spdk would look
pretty confusing. Moreover, it should make it also easier to package
these scripts as a python package.
Other than moving the packages, all of the imports were updated to
reflect these changes. Files under python now use relative imports,
while those under scripts/ use the "spdk" namespace and have their
PYTHONPATH extended with python directory.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib43dee73921d590a551dd83885e22870e72451cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9692
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The concat module can combine multiple underlying bdevs to a single
bdev. It is a special raid level. You can add a new bdev to the end of
the concat bdev, then the concat bdev size is increased, and it won't
change the layout of the exist data. This is the major difference
between concat and raid0. If you add a new underling device to raid0,
the whole data layout will be changed. So the concat bdev is extentable.
Change-Id: Ibbeeaf0606ff79b595320c597a5605ab9e4e13c4
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11070
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If a VMD device present, add message to communicate to the user to use next steps.
Allow for DRIVER_OVERRIDE="none" to just unbind the driver without binding it to any other.
Fixes#2423
Signed-off-by: Samir Raval <samir.raval@intel.com>
Change-Id: Ifef6ed50dd619ce7629eabf458edd54e6bb22fa4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12035
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Setting this optional parameter to true makes the
RPC completion wait until the attach for all
discovered NVM subsystems have completed.
This is especially useful for fio or bdevperf, to
ensure that all of the namespaces are actually
available before testing.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icf04a122052f72e263a26b3c7582c81eac32a487
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12044
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
'Content-Length' is not always available
specifically when using 'chunked' Transfer-Encoding
https://en.wikipedia.org/wiki/Chunked_transfer_encoding
This patch allows to handle chunked data transfer
and construct the request from peices.
The example of how to send chunked data:
> curl -k --user spdkuser:spdkpass -X POST -H "Content-Type: application/json" \
-H "Transfer-Encoding: chunked" \
-d '{"id": 1, "method": "bdev_get_bdevs"}' \
http://127.0.0.1:9009/
vs
> curl -k --user spdkuser:spdkpass -X POST -H "Content-Type: application/json" \
-d '{"id": 1, "method": "bdev_get_bdevs"}' \
http://127.0.0.1:9009/
Signed-off-by: Boris Glimcher <Boris.Glimcher@emc.com>
Change-Id: I6cf565d6639aa31898585f005d75785c43204552
Signed-off-by: Boris Glimcher <Boris.Glimcher@emc.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12082
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This opption allows the bdev_get_bdevs RPC to block until a bdev with
specified name appears. It can be useful, when a bdev is created
asynchronously and the exact moment at which it appears is not known.
For instance, with a discovery service, a bdev is created when a
namespace on a remote NVMeoF target is added, but it's not possible to
specify when that happens exactly.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I6c1f974fba445376ca9d45aac2639202547410cc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11960
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
These parameters will be used for any controller created
by the discovery service.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I221b791f38b9c5797ba084c647a98b82c102a121
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11942
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
In vfio-user transport, whenever one IO is completed, it will trigger
an interrupt to guest machine. This cost quite some overhead. This patch
adds an adaptive irq feature to reduce interrupt overhead and boost
performance.
Signed-off-by: Rui Chang <rui.chang@arm.com>
Change-Id: I585be072231a934fa2e4fdf2439405de95151381
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11840
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
With these we can write a simple bpftrace script to identify work being done,
and in particular what woke us up from sleeping.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I8997d847625ee4558092dbd753e6fc1b17beca92
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9424
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
SPDK has settled on what the optimal DSA configuration is, so let's
always use it.
Change-Id: I24b9b717709d553789285198b1aa391f4d7f0445
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11532
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Make use of code implemented in previous patches in the series
to get and set dynamic scheduler values.
Modifiy app.py and rpc.py to accomodate new changes and allow
user to specify scheduler parameters in the RPC calls.
Change-Id: I6173aefbf1d774b91b80ee5bce67eea80a2ab23d
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11449
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add three options for I/O error resiliency to spdk_nvme_bdev_opts.
Then the RPC bdev_nvme_set_options can configure these.
These can be overridden if these are given by the RPC bdev_nvme_attach_controller.
Change-Id: If3ee23aeef8b7585fe0fb5ec4695df5866fc1e74
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11830
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In case collect_driver() returns immediately due to missing modalias
attr, an empty $driver will be passed to check_for_driver() causing
grep inside to fail. Further false-positive then leads to call to
linux_bind_driver() as it's not able to locate proper paths for
given driver.
To avoid this, make sure collect_driver() always attempts to fallback
to a driver setup.sh supports for a target device.
Signed-off-by: Michal Berger <michallinuxstuff@gmail.com>
Change-Id: Id5631a731910f60b63c6afb3a412575bb69d784a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11747
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The following patch will need it to expand the %{python3_sitelib} macros
when building the RPMs.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I2782b228066fa0524d675c8d964217a7c9d11e36
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11656
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Now that users need to explicitly add a listener for the discovery
subsystem, make that a bit easier when using rpc.py. Instead of
having to type out nqn.2014-08.org.nvmexpress.discovery, allow
user to just specify 'discovery' as the NQN and rpc.py will
convert it to the discovery NQN before sending the RPC.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4854d4f072f1758fdd6b37a4c3685e2a2d015caa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11540
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I80e1fdb8b0a3b944ab6efdd21187cef07b685c29
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11271
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This was left out by the ea71df4f48.
Signed-off-by: Michal Berger <michallinuxstuff@gmail.com>
Change-Id: Ibd341eaa7e5a0b1a409a9efad081555728b7f880
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10941
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This parameter was ignored, and was a parameter to the
nvmf_set_config RPC.
For reference, this was deprecated in June 2020, commit
c37cf9fb.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I013f4d7cf874e7e26a8a1d299fdf9d8fa05da580
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11544
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This was a parameter on the nvmf_create_transport
RPC, and was replaced with max_io_qpairs_per_ctrlr to
reduce confusion on whether this number included the
admin queue or not.
nvmf_vhost test was using this deprecated parameter.
Change it to use -m (max_io_qpairs_per_ctrlr)
instead. '-p 4' would have been evaluated as 1 admin
queue + 3 I/O queues, but it's likely the intent
was for 4 I/O queues. This is a perfect example of
why this parameter was deprecated.
For reference, this was deprecated in June 2020,
commit 1551197db.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4364fc0a76c9993b376932b6eea243d7cefca9cd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11543
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
rpc.py users can pipe RPC calls through stdin, which
reduces overhead compared to calling rpc.py
separately for each RPC.
It is common to put these RPC calls in a file, and
then pipe that file to rpc.py. To allow commenting
out RPC calls when doing debugging, have rpc.py
ignore any lines which begin with '#', allowing users
to comment out RPC calls (or even add comments
explaining the RPC calls) with a '#' character.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8d9c6ac95dd5864c16e4d69ba80f81799068e808
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11506
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Using time_based tasks with do_verify=1 and rw=write
results in verification not being run. Basically
writes consume all run time and there's no time
left for verify:
fio: verification read phase will never start
because write phase uses all of runtime
Using verify_backlog we ask fio to verify after every
N blocks written.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I4c1571f4fad893e47cc5fea2ad6b4e2a7d8cc5ef
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11376
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Provides RPCs for the qpair error injection APIs to bdev_nvme.
These RPCs are useful in testing NVMeoF/NVMe behavior for various
error scenarios in production.
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Change-Id: I0db7995d7a712d4f8a60e643d564faa6908c3a55
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10992
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It may take a long time to detect network transport error
when e.g. port is removed on remote target. This timeout
depends on 2 parameters - retry_count and ack_timeout.
bdev_nvme_set_options supports configuration of retry_count
but transport_ack_timeout is missed. Note: this parameter
is used by RDMA transport only.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I7c3090dc8e4078f64d444e2392a9e0a6ecdc31c0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11175
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: <tanl12@chinatelecom.cn>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Added preallocation option for raw NVMe disk images.
It matches qemu-img option for raw images.
By default raw images are created with "off" option,
resulting in increased size of the disk image as it is used.
Using "falloc" option preallocates the full size of the disk,
but does not write zeroes to it, compared to "full" option.
This will make sure that in CI, a device used during test
is never exhaused due to lack of host space.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie1c30909dc87552a6d6c385d0ad80905ce68ff9d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11243
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK test script can fail during any point of the
execution. To keep using the same devices
between test runs in CI, those devices have to
be cleaned between runs.
To select device for tests or to clean before tests,
the partition table and lack of mount points is used.
SPDK GPT partitions were always considered not in use.
Meanwhile Linux GPT were not, even if lacking a mount
point.
Some of the SPDK tests create Linux GPT partitions,
which might remain after a test run.
Linux GPT partitions created during tests now contain
"SPDK_TEST" as part of their partition name.
This allows marking such block devices as 'not in use',
to be cleaned and used in further SPDK test.
fixes#2345
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I0098776239da9b0c5dcc748625485284e4863525
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11220
Reviewed-by: Michal Berger <michallinuxstuff@gmail.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: Michal Berger <michallinuxstuff@gmail.com>
Change-Id: I5e1cdb75b8b4421b2a38fe315f75e11d8ea5de23
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11110
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add configuration options to enable using IDXD
for data digest during NVMe-oF performance testing.
Change-Id: I54d443c35c67e0331e3d6ec4aecb577fc7f544c7
Signed-off-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10282
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add more dtrace probes to help with identifying issues
in production.
Change-Id: I8fb621a15c5e33ae94d75b4fc31135e2635dcfce
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10561
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I72fc8cb42f57d3272a08a6cefc58b2fa5eb26419
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11094
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
As described in Python documentation:
It is not guaranteed that __del__() methods are called for
objects that still exist when the interpreter exits.
Because of that class instance objects were not always destroyed
after tests.
Change-Id: I10f05a480cde37d274d6475efdf47d094cab7cb9
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11136
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If ctrlr_loss_timeout_sec is set to -1, reconnect is tried repeatedly
indefinitely, and I/Os continue to be queued.
This patch adds another option fast_io_fail_timeout_sec, a flag
fast_io_fail_timedout to nvme_ctrlr.
If the time fast_io_fail_timeout_sec passed after starting reset,
set fast_io_fail_timedout to true not to use the path for I/O submission.
fast_io_fail_timeout_sec is initialized to zero as same as
ctrlr_loss_timeout_sec and reconnect_delay_sec.
The name of the parameter follows the famous DM-multipath, its fast_io_fail_tmo.
Change-Id: Ib870cf8e2fd29300c47f1df69617776f4e67bd8c
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10301
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously reconnect retry was not controlled and was repeated indefinitely.
This patch adds two options, ctrlr_loss_timeout_sec and reconnect_delay_sec,
to nvme_ctrlr and add reset_start_tsc, reconnect_is_delayed, and
reconnect_delay_timer to nvme_ctrlr to control reconnect retry.
Both of ctrlr_loss_timeout_sec and reconnect_delay_sec are initialized to
zero. This means reconnect is not throttled as we did before this patch.
A few more changes are added.
Change nvme_io_path_is_failed() to return false if reset is throttled
even if nvme_ctrlr is reseting or is to be reconnected.
spdk_nvme_ctrlr_reconnect_poll_async() may continue returning -EAGAIN
infinitely. To check out such exceptional case, use ctrlr_loss_timeout_sec.
Not only ctrlr reset but also non-multipath ctrlr failover is controlled.
So we need to include path failover into ctrlr reconnect.
When the active path is removed and switched to one of the alternative paths,
if ctrlr reconnect is scheduled, connecting to the alternative path is left
to the scheduled reconnect.
If reset or reconnect ctrlr is failed and the retry is scheduled,
switch the active path to one of alternative paths.
Restore unit test cases removed in the previous patches.
Change-Id: Idec636c4eced39eb47ff4ef6fde72d6fd9fe4f85
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10128
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
In project practice, config_file and key_file are often used to connect
to a rados cluster, config_file includes "mon_host" and other rados
configurations like "rbd_cache", and key_file includes the secret key
and the access authority to each pool for current user. This patch adds
key_file option, user can specify config_file and key_file or only config_param
to connect rados cluster. This will make it much more flexible for users with
his/her convenience.
Signed-off-by: Tan Long <tanl12@chinatelecom.cn>
Change-Id: I6b49aad70b578bdeb3ac8ea9ca0fcbd931582025
Signed-off-by: Tan Long <tanl12@chinatelecom.cn>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10485
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add support to enable individual traces through rpc commands
and modify jsonrpc.md to describe the changes.
Change-Id: I3664fc28f1c25a76eade4cff0a0ab1870172f8de
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10518
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add dtrace probes aroung qpair/controller/subsystem management
to help with debugging issue #2055.
Change-Id: I0b981bffadee3fe4172ad6916c059bf357959dde
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10237
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This RPC will stop the specified discovery service,
including detaching from any controllers that were
attached as part of that discovery service.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9222876457fc45e1acde680a7bd1925917c22308
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10832
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
