After 7610bc38d, python modules are now located in the python/
directory. That patch also updated PYTHONPATH assignment in most of the
scripts, but one of the perf script and some docs/messages were missed.
Change-Id: Iff3588526f2a382e599f5734d38fc32c15a7bf56
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12223
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use "generic" Fedora34 from Roboxes, as we did for
all other Fedora Vagrant boxes.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I208264c50a067b26c9ec5da2250f27881ba8431d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12227
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Fix pylint findings:
- R0201 Method could be a function
Signed-off-by: Pawel Piatek <pawelx.piatek@intel.com>
Change-Id: I1b9141b9ab150e20fdcd63510b484c6be514efb5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12137
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is done to make sure we don't miss more complex setups where
target devices are not mounted but still hold some valid data that
shouldn't be touched in any way.
Also, adjust function names so they clearly indicate what is being
checked.
Signed-off-by: Michal Berger <michallinuxstuff@gmail.com>
Change-Id: Ibb0f1f21de68009a2f8f1faf4595a07ae527da35
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11111
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Up until now, importing an SPDK RPC python module was just a matter of
`import rpc`. It's fine until there's another module called `rpc`
installed on the system, in which case it's impossible to import both of
them. Therefore, to avoid this problem, all of the modules were moved
to a separate directory under the "spdk" namespace.
The decision to move to a location under a separate directory was
motivated by the fact that a directory called scripts/spdk would look
pretty confusing. Moreover, it should make it also easier to package
these scripts as a python package.
Other than moving the packages, all of the imports were updated to
reflect these changes. Files under python now use relative imports,
while those under scripts/ use the "spdk" namespace and have their
PYTHONPATH extended with python directory.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib43dee73921d590a551dd83885e22870e72451cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9692
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The concat module can combine multiple underlying bdevs to a single
bdev. It is a special raid level. You can add a new bdev to the end of
the concat bdev, then the concat bdev size is increased, and it won't
change the layout of the exist data. This is the major difference
between concat and raid0. If you add a new underling device to raid0,
the whole data layout will be changed. So the concat bdev is extentable.
Change-Id: Ibbeeaf0606ff79b595320c597a5605ab9e4e13c4
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11070
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If a VMD device present, add message to communicate to the user to use next steps.
Allow for DRIVER_OVERRIDE="none" to just unbind the driver without binding it to any other.
Fixes#2423
Signed-off-by: Samir Raval <samir.raval@intel.com>
Change-Id: Ifef6ed50dd619ce7629eabf458edd54e6bb22fa4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12035
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Setting this optional parameter to true makes the
RPC completion wait until the attach for all
discovered NVM subsystems have completed.
This is especially useful for fio or bdevperf, to
ensure that all of the namespaces are actually
available before testing.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icf04a122052f72e263a26b3c7582c81eac32a487
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12044
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
'Content-Length' is not always available
specifically when using 'chunked' Transfer-Encoding
https://en.wikipedia.org/wiki/Chunked_transfer_encoding
This patch allows to handle chunked data transfer
and construct the request from peices.
The example of how to send chunked data:
> curl -k --user spdkuser:spdkpass -X POST -H "Content-Type: application/json" \
-H "Transfer-Encoding: chunked" \
-d '{"id": 1, "method": "bdev_get_bdevs"}' \
http://127.0.0.1:9009/
vs
> curl -k --user spdkuser:spdkpass -X POST -H "Content-Type: application/json" \
-d '{"id": 1, "method": "bdev_get_bdevs"}' \
http://127.0.0.1:9009/
Signed-off-by: Boris Glimcher <Boris.Glimcher@emc.com>
Change-Id: I6cf565d6639aa31898585f005d75785c43204552
Signed-off-by: Boris Glimcher <Boris.Glimcher@emc.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12082
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This opption allows the bdev_get_bdevs RPC to block until a bdev with
specified name appears. It can be useful, when a bdev is created
asynchronously and the exact moment at which it appears is not known.
For instance, with a discovery service, a bdev is created when a
namespace on a remote NVMeoF target is added, but it's not possible to
specify when that happens exactly.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I6c1f974fba445376ca9d45aac2639202547410cc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11960
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
These parameters will be used for any controller created
by the discovery service.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I221b791f38b9c5797ba084c647a98b82c102a121
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11942
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
In vfio-user transport, whenever one IO is completed, it will trigger
an interrupt to guest machine. This cost quite some overhead. This patch
adds an adaptive irq feature to reduce interrupt overhead and boost
performance.
Signed-off-by: Rui Chang <rui.chang@arm.com>
Change-Id: I585be072231a934fa2e4fdf2439405de95151381
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11840
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
With these we can write a simple bpftrace script to identify work being done,
and in particular what woke us up from sleeping.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I8997d847625ee4558092dbd753e6fc1b17beca92
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9424
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
SPDK has settled on what the optimal DSA configuration is, so let's
always use it.
Change-Id: I24b9b717709d553789285198b1aa391f4d7f0445
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11532
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Make use of code implemented in previous patches in the series
to get and set dynamic scheduler values.
Modifiy app.py and rpc.py to accomodate new changes and allow
user to specify scheduler parameters in the RPC calls.
Change-Id: I6173aefbf1d774b91b80ee5bce67eea80a2ab23d
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11449
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add three options for I/O error resiliency to spdk_nvme_bdev_opts.
Then the RPC bdev_nvme_set_options can configure these.
These can be overridden if these are given by the RPC bdev_nvme_attach_controller.
Change-Id: If3ee23aeef8b7585fe0fb5ec4695df5866fc1e74
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11830
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In case collect_driver() returns immediately due to missing modalias
attr, an empty $driver will be passed to check_for_driver() causing
grep inside to fail. Further false-positive then leads to call to
linux_bind_driver() as it's not able to locate proper paths for
given driver.
To avoid this, make sure collect_driver() always attempts to fallback
to a driver setup.sh supports for a target device.
Signed-off-by: Michal Berger <michallinuxstuff@gmail.com>
Change-Id: Id5631a731910f60b63c6afb3a412575bb69d784a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11747
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The following patch will need it to expand the %{python3_sitelib} macros
when building the RPMs.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I2782b228066fa0524d675c8d964217a7c9d11e36
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11656
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Now that users need to explicitly add a listener for the discovery
subsystem, make that a bit easier when using rpc.py. Instead of
having to type out nqn.2014-08.org.nvmexpress.discovery, allow
user to just specify 'discovery' as the NQN and rpc.py will
convert it to the discovery NQN before sending the RPC.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4854d4f072f1758fdd6b37a4c3685e2a2d015caa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11540
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I80e1fdb8b0a3b944ab6efdd21187cef07b685c29
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11271
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This was left out by the ea71df4f48.
Signed-off-by: Michal Berger <michallinuxstuff@gmail.com>
Change-Id: Ibd341eaa7e5a0b1a409a9efad081555728b7f880
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10941
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This parameter was ignored, and was a parameter to the
nvmf_set_config RPC.
For reference, this was deprecated in June 2020, commit
c37cf9fb.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I013f4d7cf874e7e26a8a1d299fdf9d8fa05da580
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11544
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This was a parameter on the nvmf_create_transport
RPC, and was replaced with max_io_qpairs_per_ctrlr to
reduce confusion on whether this number included the
admin queue or not.
nvmf_vhost test was using this deprecated parameter.
Change it to use -m (max_io_qpairs_per_ctrlr)
instead. '-p 4' would have been evaluated as 1 admin
queue + 3 I/O queues, but it's likely the intent
was for 4 I/O queues. This is a perfect example of
why this parameter was deprecated.
For reference, this was deprecated in June 2020,
commit 1551197db.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4364fc0a76c9993b376932b6eea243d7cefca9cd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11543
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
rpc.py users can pipe RPC calls through stdin, which
reduces overhead compared to calling rpc.py
separately for each RPC.
It is common to put these RPC calls in a file, and
then pipe that file to rpc.py. To allow commenting
out RPC calls when doing debugging, have rpc.py
ignore any lines which begin with '#', allowing users
to comment out RPC calls (or even add comments
explaining the RPC calls) with a '#' character.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8d9c6ac95dd5864c16e4d69ba80f81799068e808
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11506
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Using time_based tasks with do_verify=1 and rw=write
results in verification not being run. Basically
writes consume all run time and there's no time
left for verify:
fio: verification read phase will never start
because write phase uses all of runtime
Using verify_backlog we ask fio to verify after every
N blocks written.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I4c1571f4fad893e47cc5fea2ad6b4e2a7d8cc5ef
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11376
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Provides RPCs for the qpair error injection APIs to bdev_nvme.
These RPCs are useful in testing NVMeoF/NVMe behavior for various
error scenarios in production.
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Change-Id: I0db7995d7a712d4f8a60e643d564faa6908c3a55
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10992
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It may take a long time to detect network transport error
when e.g. port is removed on remote target. This timeout
depends on 2 parameters - retry_count and ack_timeout.
bdev_nvme_set_options supports configuration of retry_count
but transport_ack_timeout is missed. Note: this parameter
is used by RDMA transport only.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I7c3090dc8e4078f64d444e2392a9e0a6ecdc31c0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11175
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: <tanl12@chinatelecom.cn>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Added preallocation option for raw NVMe disk images.
It matches qemu-img option for raw images.
By default raw images are created with "off" option,
resulting in increased size of the disk image as it is used.
Using "falloc" option preallocates the full size of the disk,
but does not write zeroes to it, compared to "full" option.
This will make sure that in CI, a device used during test
is never exhaused due to lack of host space.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie1c30909dc87552a6d6c385d0ad80905ce68ff9d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11243
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK test script can fail during any point of the
execution. To keep using the same devices
between test runs in CI, those devices have to
be cleaned between runs.
To select device for tests or to clean before tests,
the partition table and lack of mount points is used.
SPDK GPT partitions were always considered not in use.
Meanwhile Linux GPT were not, even if lacking a mount
point.
Some of the SPDK tests create Linux GPT partitions,
which might remain after a test run.
Linux GPT partitions created during tests now contain
"SPDK_TEST" as part of their partition name.
This allows marking such block devices as 'not in use',
to be cleaned and used in further SPDK test.
fixes#2345
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I0098776239da9b0c5dcc748625485284e4863525
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11220
Reviewed-by: Michal Berger <michallinuxstuff@gmail.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: Michal Berger <michallinuxstuff@gmail.com>
Change-Id: I5e1cdb75b8b4421b2a38fe315f75e11d8ea5de23
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11110
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add configuration options to enable using IDXD
for data digest during NVMe-oF performance testing.
Change-Id: I54d443c35c67e0331e3d6ec4aecb577fc7f544c7
Signed-off-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10282
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add more dtrace probes to help with identifying issues
in production.
Change-Id: I8fb621a15c5e33ae94d75b4fc31135e2635dcfce
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10561
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I72fc8cb42f57d3272a08a6cefc58b2fa5eb26419
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11094
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
As described in Python documentation:
It is not guaranteed that __del__() methods are called for
objects that still exist when the interpreter exits.
Because of that class instance objects were not always destroyed
after tests.
Change-Id: I10f05a480cde37d274d6475efdf47d094cab7cb9
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11136
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If ctrlr_loss_timeout_sec is set to -1, reconnect is tried repeatedly
indefinitely, and I/Os continue to be queued.
This patch adds another option fast_io_fail_timeout_sec, a flag
fast_io_fail_timedout to nvme_ctrlr.
If the time fast_io_fail_timeout_sec passed after starting reset,
set fast_io_fail_timedout to true not to use the path for I/O submission.
fast_io_fail_timeout_sec is initialized to zero as same as
ctrlr_loss_timeout_sec and reconnect_delay_sec.
The name of the parameter follows the famous DM-multipath, its fast_io_fail_tmo.
Change-Id: Ib870cf8e2fd29300c47f1df69617776f4e67bd8c
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10301
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously reconnect retry was not controlled and was repeated indefinitely.
This patch adds two options, ctrlr_loss_timeout_sec and reconnect_delay_sec,
to nvme_ctrlr and add reset_start_tsc, reconnect_is_delayed, and
reconnect_delay_timer to nvme_ctrlr to control reconnect retry.
Both of ctrlr_loss_timeout_sec and reconnect_delay_sec are initialized to
zero. This means reconnect is not throttled as we did before this patch.
A few more changes are added.
Change nvme_io_path_is_failed() to return false if reset is throttled
even if nvme_ctrlr is reseting or is to be reconnected.
spdk_nvme_ctrlr_reconnect_poll_async() may continue returning -EAGAIN
infinitely. To check out such exceptional case, use ctrlr_loss_timeout_sec.
Not only ctrlr reset but also non-multipath ctrlr failover is controlled.
So we need to include path failover into ctrlr reconnect.
When the active path is removed and switched to one of the alternative paths,
if ctrlr reconnect is scheduled, connecting to the alternative path is left
to the scheduled reconnect.
If reset or reconnect ctrlr is failed and the retry is scheduled,
switch the active path to one of alternative paths.
Restore unit test cases removed in the previous patches.
Change-Id: Idec636c4eced39eb47ff4ef6fde72d6fd9fe4f85
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10128
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
In project practice, config_file and key_file are often used to connect
to a rados cluster, config_file includes "mon_host" and other rados
configurations like "rbd_cache", and key_file includes the secret key
and the access authority to each pool for current user. This patch adds
key_file option, user can specify config_file and key_file or only config_param
to connect rados cluster. This will make it much more flexible for users with
his/her convenience.
Signed-off-by: Tan Long <tanl12@chinatelecom.cn>
Change-Id: I6b49aad70b578bdeb3ac8ea9ca0fcbd931582025
Signed-off-by: Tan Long <tanl12@chinatelecom.cn>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10485
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add support to enable individual traces through rpc commands
and modify jsonrpc.md to describe the changes.
Change-Id: I3664fc28f1c25a76eade4cff0a0ab1870172f8de
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10518
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add dtrace probes aroung qpair/controller/subsystem management
to help with debugging issue #2055.
Change-Id: I0b981bffadee3fe4172ad6916c059bf357959dde
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10237
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This RPC will stop the specified discovery service,
including detaching from any controllers that were
attached as part of that discovery service.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9222876457fc45e1acde680a7bd1925917c22308
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10832
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
This patch adds the framework for a discovery
service in the bdev/nvme module.
Users can specify an IP/port of a discovery service.
The bdev/nvme module will connect to a discovery
controller, get the discovery log page, and then
register for AERs. It will connect to each
subsystem specified in the initial log page.
AER completions will trigger fetching the log
page again, at which point new subsystems will
be connected to, or removed subsystems will be
detached.
This patch does the following:
* Adds the new start_discovery RPC
* Connects to the discovery controller
* Gets the discovery log page
* Registers for AERs
* Detach from discovery controllers at shutdown
Subsequent patches in this series will:
* Connect to subsystems listed in discovery log page
* Detach from subsystems that were listed in earlier
discovery log pages but subsequently removed
* Add a stop_discovery RPC
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I54bfa896a48c5619676f156b5ea9f2d1f886c72f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10694
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
It makes it possible for the user to specify whether a transport should
try to use zero-copy to execute requests when possible.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I40a92b0d7a6707f4c9292795f380846acb227200
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10780
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If a function prefixed with spdk_ was moved between
files, the check_format.sh naming convention checks
would fail. This is because it thinks the function
was added, but doesn't see it getting added to the
header file, since the header file wasn't touched
by the commit.
So resolve this by doing the defined/removed checks
on a per-library basis, rather than per-file. The
checks already handled the case where functions
were moved within a file, and that will all work
the same now that we check on a per-lib basis.
Fixes issue #2307.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If85a1e9c3cd349b701a10531726e814b60fba26d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10967
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: wanghailiang <hailiangx.e.wang@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Modify nvmf_path.bt to collect the (ip, port)
tuples in a map, and then print the map every
second. This generates a lot less output than
printing the path for every single I/O.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8f655ed7a4558735f51ddf1169134fbf6950cc1c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10616
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Default configuration need to be changed due to Openstack network
service change from OVS to OVN. Previous configuration is no longer
valid with new network service
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I39f77a3ac75c35f1551c0097b8344e654b2029dd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10959
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
We should gather the core regardless of the RLIMIT_CORE setting.
Also, don't limit number of parallel executions of the collector
in case more than 2 processes crashed (unlikely to happen anyway,
but just in case make sure we cover it). Lastly, wait a bit longer
for the potential cores.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ic7de8f8000676122282469b729f45b235ab6f9ca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10852
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I780568b9c95a47038278c3ed19fb08228a48fb9c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10740
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I6794886832ec641ec18b72621f21264970d805d5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7118
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Not every transport requires accept poller - transport specific
layer can have its own policy and way of handling new connection.
APIs to notify generic layer are already in place
- spdk_nvmf_poll_group_add
- spdk_nvmf_tgt_new_qpair
Having accept poller removed should simplify interrupt mode impl
in transport specific layer.
Fixes issue #1876
Change-Id: Ia6cac0c2da67a298e88956734c50fb6e6b7521f1
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7268
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ib95e9561299ceed3a37665da1decbfb9fce300dc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10356
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Added an option, `--format-lspci` that produces output that can be
consumed by `lspci -F`. Additionally, added a simple convenience script
that executes lspci with the the output of the RPC.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I41a0f846f32506c28cf6ca3a299ed264f64db1a4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10653
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This RPC lists all PCI devices attached to an SPDK application. Each
device is identified by a BDF and contains a buffer with a copy of its
config space.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I852f421fde105d975458f8e63b8da4f92ed2c69b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10652
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
Update scripts with Fedora 35 and remove older
versions which we no longer use.
Change-Id: I54d9f3bcf76065f3e4e3094411d77153c351afc9
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10612
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
As we known, there's a bug in argparser, which puts
required descriptions in optional list.
There are many such descriptions, if not to break a
lot of existing scripts, just adding a notice description
behind required item.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I3d8d2db96dc947d8342cc4e04ce3914da64be146
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10580
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
check_format.sh requires the following, none of which
are supported by default on MacOS and require alternative
homebrew installation for GNU variants:
* mapfile command not supported by bash
* -f option for readlink
* -P option for grep
Note that SPDK is not supported on MacOS, the changes
here are added only for developer convenience.
Fixes issue #2255.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic3d4ed49d9bfb4be50a8dd090a34090037f592c0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10476
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This also translates into switching fully to upstream QEMU for the
vagrant setup.
This is done in order to move away from OCSSD and SPDK's qemu fork
and align with what upstream QEMU supports. Main changes touch the
way how nvme namespaces are configured. With >= 5.2.0 it's possible
now to configure multiple namespace under single nvme device. Each
namespace requires a separate disk image to work with. This:
-b foo.img,nvme,1...
-b foo.img
-b foo.img,,..
Will still configure nvme controller with a single namespace attached
to foo.img.
This:
-b foo.img,,foo-ns1.img:foo-ns2.img
Will configure nvme controller with three namespaces.
Configuring nvme controller with no namespaces is possible via:
-b none ...
Note that this still allows to define other options specific to nvme
controller, like CMB and PMR. E.g:
-b none,nvme,,true
This will create nvme controller with no namespaces but with CMB
enabled.
It's possible now to also request for given controller to be zoned.
Currently if requsted, all namespaces under the target controller
will be zoned with no limit set as to max open|active zones.
All nvme devices have block size fixed to 4KB to imititate behavior
of the SPDK's qemu fork.
Compatibility with spdk-5.0.0 fork is preserved in context of setting
up namespaces so this:
-b foo.img,nvme,2
is valid as long as the emulator is set to that of spdk-5.0.0's.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ib5d53cb5c330c1f84b57e0bf877ea0e2d0312ddd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8421
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It's been some time since SPDK switched from ini to json,
there's no much benefit from keeping these tests around.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I0cf7fcd6587abe872553211e41bee12e14bf234f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10065
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
TypeError: ethtool_after_fio_ramp() argument after * must be an iterable, not int
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I12403967b5b8ce7282c65296a54e00bd047cf903
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10367
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This driver is now built by vm_setup.sh and installed under
/lib/modules.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Icea6b96e60390932c14ff49405614c186e61a99b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6099
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We provided list of IP addresses as the example of the list of the
initiator names of the iscsi_create_initiator_group and
iscsi_initiator_group_add_initiators RPCs.
However, they were very confusing and gave little hint about how
to use initiator name.
Fix them by providing IQNs instead.
Fixes issue #2209
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8ce19c4ed0af54fd8a6f1ab2a74b2e6f865d3d1c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10236
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Versions of centos we support - 7 and 8 - don't ship with ruby which
can handle installation of the mdl gem due to unmet dependencies -
it's simply too old.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Id0a3843bcab12b8de332d1d3f64956f043c347e3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9483
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Get shfmt package according to arch.
Change-Id: Ib51feb64368e1ef559c886d9899dd7a1f28cff95
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9996
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Allow to specify optimal IO boundary for
malloc bdev, it can be used to test split
of IO requests on generic bdev layer
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ic3529dc00cf852ea5cf40d0553d846a698fff6c7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10068
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
In case of linux systems, which don't provide /etc/os-release, the
ID would become plain "linux" (due to a fallback to uname). This
would result in a confusing message stating that we don't support
a "linux" platform. Instead, be specific as to what we are looking
for and what distros we support.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: If6a71ea08b315f54c906206165e3dbcd4c21379c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10260
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3f1589880a00a0788fe5fbb2104789b3f81e1497
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10188
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When I use a single json config to run 4k and 64k together, the IOPS
for the 4k test were lower than expected because the script is using
metrics from both the 4k_64_randrw_m_100_* and 64k_64_randrw_m_100_*
to calculate the average metrics because 4k_64_randrw_m_100_* is in
64k_64_randrw_m_100_*. Fixed issue by checking, if the result file
startswith the name of the fio config file.
Change-Id: I630385c34223b38694d7e2bb578779627c89866d
Signed-off-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10127
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
From the CI perspective, this allows for proper binding of given
VM builds to specific tasks (e.g. use this image for LTS, this
one for release, etc.) since by default vagrant always uses the
"latest" version of given box.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I0cbd2a47e7dbdcbe83d18e3fc3100fd2a2400983
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10132
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I1b437ee8f63e7cc15e60f611fe0c814542c73ece
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10131
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
This can be used for multipath validation.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iba62c5e90b22a9a85078fbc783d3a7273c029cde
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10137
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If trsvcid is not set in the nvmf_subsystem_remove_listener call,
rpc client treats it as 'None' and sends "null" to the application,
which causes decode failure in SPDK.
Trsvcid is described as optional and should be treated this way.
For such a listener removal call with an empty trsvcid, "" should be
sent as trsvcid instead of "null" in the json request.
Signed-off-by: Blachut, Bartosz <bartosz.blachut@intel.com>
Change-Id: Ic26907c22a2600c9618354ce8ff63e93e00aec09
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9659
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will allow runtime observation of the
dynamic scheduler in a release build.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7436b5dbcaa0df1529f828ef75f4e9335a092893
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9672
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add bdev_retry_count to spdk_bdev_nvme_opts and retry_count to
nvme_bdev_io, respectively.
Set type of both to int because we want use -1 for infinite retry.
Set the default value of bdev_retry_count to zero for the backward
compatibility.
bdev_retry_count is configurable by the RPC bdev_nvme_set_options.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9bc746fcea54aa8722c76f79c70c2ae2b375aa53
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9864
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
retry_count of struct spdk_bdev_nvme_opts controls the number of retries
in the transport layer, and is set to transport_retry_count of struct
spdk_nvme_ctrlr_opts.
The next patch will add bdev_retry_count to struct spdk_bdev_nvme_opts
to control the number of retries in the bdev layer.
For clarification, rename retry_count to transport_retry_count of
struct spdk_bdev_nvme_opts. Then deprecate the retry_count parameter
and add and use an new parameter transport_retry_count instead for
the RPC bdev_nvme_set_options.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0689c54aa1c96ee99d24236e8ff1a594ad7208e4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9924
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
SPDK nvmf target reports all listeners on all subsystems
in discovery pages, kernel target reports only subsystems
listening on a port where discovery command is received.
NVMEoF specification allows to specify any addresses/
transport types. Ch 5: The set of Discovery Log entries should
include all applicable addresses on the same fabric as the
Discovery Service and may include addresses on other fabrics.
To align SPDK and kernel targets behaviour, add filtering
rules to allow flexible configuration of what should be
listed in discovery log page entries.
Fixes#2082
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ie981edebb29206793d3310940034dcbb22c52441
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9185
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
You can now detach specific paths based on the host parameters. This is
useful for two paths to the same target that use different local NICs.
Change-Id: I4858bfda7d940052ca77ffb0bbe764a688fb315d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9827
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
This patch is to solve the issue that two nvmf target connect the same rbd image and used for multipath.
The scenario is host wants to access the same rbd image via two gateways, host and gateways are working as nvmf ini and tgt, and two gateways connect with the rbd image, io can switch to another gateway once one is broken. The targets of multipath must have the same uuid, so this patch add a new argument for bdev_rbd_create, like malloc dev.
Signed-off-by: tanlong <948985618@qq.com>
Change-Id: I593fedb6c5d94f625f1b331fdc40e2db488f7fb7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9935
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also moved qat_setup.sh to functional tests
fixes: GH#2203
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Iab69b192a29013a69f4cc4a251a34dcc6fbf6b7d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9952
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Currently the only way to see the relations, while using trace.py script,
is to feed it a JSON formatted file. This patch allows trace.py
to do the same for the for the binary trace files.
Change-Id: I7237896ede608080d3bec896a43586e34c297b04
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9906
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Make use of the changes introduced in previous patches while
printing trace information.
Change-Id: I69edadfb4a7d34fa9c8c1c520b083372317cabbb
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9638
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Currently we do not have any way to connect traces from different
modules in SPDK. This change modifies our trace library
and app/trace to handle adding relations between trace points
and a trace object.
Additionally this patch adds classes and fields to structs
inside trace.py to prepare it for future patches implementing
printing relation information.
Change-Id: Ia09d01244d923957d589fd37e6d4c98f9f7bbd07
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9620
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Forced grep to use use basic regular expression syntax (-G option) and
removed escape characters from "{", as they're not needed in this mode.
It fixes the following errors:
fatal: command line, 'enum spdk_nvmf_subsystem_state \{': Unmatched \{
fatal: command line, 'enum nvmf_tgt_state \{': Unmatched \{
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I7dd15207d6ff22d229d8f66668d33e0f5596379e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9932
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If an USDT probe is defined within a shared object, bpftrace expects the
path to that shared object instead of an executable. This means that we
need to replace __EXE__ in the bpftrace scripts differently, depending
on whether the application was linked statically or dynamically.
This is now done by the `scripts/bpf/gen.py` script. It lists all
available probes, along with their locations, of a process. Then, it
matches them to those described in a bpftrace script replacing the
__EXE__ markers with the listed location (either a path to the
executable or a shared library). If a bpftrace script uses a probe that
isn't listed, its __EXE__ will be replaced by a path to the executable.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I7c323d5f7d948ea57cf8d4d3132e4d59a2de594f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9807
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Id22c28c46a5fbdf5bd76b31d16f07f2672dfe14e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9306
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I4f838df0bfb91398eb5d179a982165adb8af3476
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9291
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ib24714363405f926ac8483244b24296fe35d5a86
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9591
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
A temporary workaround for issues seen when using "adq_enable"
is to set channel-pkt-inspect-optimize on before fio ramp_up and
turn it off when ramp_up is ending.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I74f71d11e3b9d1a064b36de8acc7a2a23f51a34b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9879
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
* Added sleep as sugested in config guide
* Moved adq_configure_tc() before nvmf_create_transport()
* Added extra logs to output
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Icc253b98a0fadbe917e912342f91e2bc5ca5064b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9703
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add tcp events changed in previous patch to the trace.py for
enhanced event information.
Change-Id: I8f176905a8283ba1b588d95bdbc075c38677acbe
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9307
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Changed the way a line is formatted to avoid unnecessary operations.
This slightly (~5-10%) decreases the runtime when the script is executed
on large trace files.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I5549462d56f866bea99609f746aa53890b98d622
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9442
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
The stack trace is no longer printed if a user presses <C-c> while the
script is running or pipes its output to tools such as head or less.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I0951c38d914986b5c9bf2ee98bcd046f0e957ff0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9441
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
It makes it more convinient for a user to start the script, as it's no
longer necessary to update the library path manually.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I0dbeb54cad2585a50162c91f48c5ef199fa133b9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9440
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Added trace provider based on the trace library. It uses ctypes to
define the trace objects and execute library calls. It significantly
(~2x) speeds up the execution time on large trace files.
The script automatically detects the type of the trace file and will use
the appropriate engine (either JSON or the trace library) using
python-magic for file detection. When piping a file through stdin, JSON
format will be assumed.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Icfa216edee4662714266968eeb72f0097b3779b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9439
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
At least on my system, I need an extra escape for
the opening brace in the generated enums.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2f1d55f817bc10b3b1084d8280f330cdbd50edf6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9671
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
bpftrace scripts do not allow struct definitions after
the first probe definition (including BEGIN/END).
This is problematic for an upcoming patch which will
include some struct defintions.
So instead just add the generated BEGIN/END probes
with enum definitions to the end of the user-specified
script, instead of the beginning.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7bc8c18c0891ee26edc099aef96ea18ed63ccb72
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9670
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ibcc7a77d1ebcc013b5050564fcc31b23b1202912
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9840
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
This parameter may have the values "disable" or "failover". The default
is failover to match existing behavior. In the future we expect to
change the default behavior to disable.
Further, we expect to add an "enable" option soon to do full multipath.
Change-Id: Iebbdc9b95f23101f18d64e085933463498e627be
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9343
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I1a4d32de6a83800cdcd65dde3895a36731c52838
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9710
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These fields aren't needed by the JSON provider, as the trace entries in
this format already has the owner and object fields filled, but it'll be
needed for the provider using the trace library.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I9db974793193fe59bfffc8dd3b975d5343036be9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9438
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This abstraction will make it possible to support different sources for
the traces. The current JSON implementation is moved to a provdider and
a new one using the trace_parse library will be added in the following
patches.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I322e7984ffe19ce8b8e1bb551e8339655383623f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9437
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ifdd1d02b466b6496469c9ea1f09633b6e368ab57
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9617
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Similar is already done for json-rpc bdev_get_bdevs, it might be
useful for the upper layer which has no interest in all but only
in one specified.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ie1af1cb4778edd265914bbfdc2777f66c6c76572
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9362
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ifa8e80e0a25af7757181f480ab0405ec902a61ff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9596
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add "create_remote_json_config" which will create
a bdev JSON configuration for SPDK initiator to
connect to NVMe-oF Target.
Change-Id: I2370c6911df35ffa1f27e93bdfa4ddb7f174ea49
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8776
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ia858a47e51a6ef4a0fba1dc1e68d314b27e20342
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9276
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The check needs to fail if documentation is missing
for any RPC. But the way the check was written, the
rc would get set to 0 everytime it found docs for
an RPC. This means it would only return failure if
the last RPC that was checked did not have
documentation.
While here, add a message telling the user that
JSON-RPC docs are being checked, to be consistent
with other checks in this script.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib2ff0f0432ce3e2853526223c0ad00176d84a78c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9391
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
SPDK has been inconsistent in the argument names,
most use dashes (--max-subsystems, --io-unit-size),
but in some cases we had underscores (--tgt_name,
--include_aliases).
So let's do 3 things here:
1) convert all argument names to use dashes only
2) if user passes and argument with an underscore,
convert it to a dash implicitly - this ensures
backward compatability and is a bit less pedantic
3) enforce use of dashes in check_format.sh
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I99289d3d3b03ce40cf192ad4fddec7b5c6bc8388
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9390
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This one provides devtoolset packages which can be used for adding
alternatives for some older packages like gcc for instance. Useful
for the CI to bring newer stuff into VMs.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ia82d712e670177f37256a999f5dc2a07784d2218
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9500
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Some distros may already provide liburing (e.g. fedora34) as a
package. In case given system has it installed, without the devel
portion, we would skip building our own version leaving system
without proper include files needed for the tests.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I7b07ba8d1c3c6b97d6b114935dfe472cc7902bf6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9543
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This script contains the necessary steps for the cross-compilation
of SPDK and the libraries needed by SPDK for aarch64 on x64 machines.
Signed-off-by: Krishna Kanth Reddy <krish.reddy@samsung.com>
Change-Id: I6319f461242b267ca4b63f276d98ee8820085bfe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8784
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
MD040 - Fenced code blocks should have a language specified
Fixed all errors
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Iddd307068c1047ca9a0bb12c1b0d9c88f496765f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9272
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Similar is already done for json-rpc bdev_get_bdevs, it might be
useful for the upper layer which has no interest in all but only
in one specified.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I25f7d20ff953e612d7982207d57607f1c3bbaa90
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9361
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Do not print ETA output. This pollutes logs when long
benchmark tests are run.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I0dfe30fdd727decb4d81be6b530e675bc1f4518c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9379
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
As per os-release(5), if $ID is not recognised, $ID_LIKE can be used
to identify similar systems in preference order. Modify the script to try both
variables.
Also do the same for the RPM build scripts.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I4ed924df01ec678aab232e114d8c9980463c38e0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9260
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
In case SPDK app crashed the leftover sock file would force completion
to use rpc_get_methods() instead of the -h output to get the list of
rpc functions. The end result would look something like:
$ rpc.py <TAB> IsSPDKapplicationrunning?
By the very accident this is quite informative about the state of the
app but from bash-completion standpoint not very useful. Instead,
if rpc_get_methods() fail fallback to -h output.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I9ca0b919445e5a08c49ab8fa5d0a3acc2e5c4e4e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8448
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
This helps in completing, for instance, file paths as arguments to
some of the rpc functions (like bdev_aio_create, etc.).
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Id0880773fade3fc6128ac9de6abfe19f6b40077f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8447
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Symlink requires repo to be around, having a hard copy allows it to
be used standalone.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: If5aa354b10762805394418e9c9c0d171623ba093
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8446
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
As far as we're aware, this is not in use by anyone. OCSSD has largely
been replaced by ZNS and no OCSSD drives made it to the market.
Change-Id: I020ee277da5292f8c4777f224acafd87586f8238
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9328
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
MD025 - Multiple top level headers in the same document
Fixed all errors
Update check_format.sh to fit new header style in jsonrpc.md
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ib5f832c549880771c99c15b89affe1e82acd3fa4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9045
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add option to enable gathering BPF traces while
running the test.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I9ea317a37c3638def40a525eca06f2d8325a74c2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8644
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Allow redirecting output to file. Using simple
"if" for an environment variable, as script arguments
number is variable and using getops seems like an
overkill.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I7e219bb1fd6377bc20c44b76cec3685b32e9316c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8643
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
create_json_config_with_subsystems contents does not
need to be in a function. Moving it to main simplifies
--with-subsystems condition.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I1414a209cc666ebb4639fc25133168482bd96c97
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8775
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
No need to keep "bdfs" variable as global variable.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I655ed9f1514f13a6460292c1298ef08f904157fa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8774
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I21b7798e1004b227bcd7f62ee8867667c67dab7c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8773
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
-g option using only files known to git, that allow us
to avoid errors from submodules
Also add check if mdl is installed, and gracefull info if not.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ib6e1920774ffca81e62d9abebc8d8b4548feb519
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9086
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Since we will create new bdev relied on libpmem object
library, so need add it.
Change-Id: I7ddcc694fd2ec5a0536abc9813b13fa429fcf068
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9049
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This package is no longer available in PyPI.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I3e68b03eabeb4aff14453c90846fd03452c93ae2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8956
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Parses and verifies hexadecimal cpu bit mask specified by the user.
Added verification to check for cpu cores range, making sure poll groups cores
assigned within the range of cpu cores allocated for the application.
RPC nvmf_set_config now takes an argument to configure ‘poll groups’,
a new parameter for NVMf subsystem. This parameter sets a CPU mask
to spawn threads which run an event loop for a ‘poll group’.
Change-Id: Ied9081c2213715ec94de00a8b37153730b8ac2ed
Signed-off-by: Yuri <yuriy.kirichok@hpe.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5611
Community-CI: Mellanox Build Bot
Reviewed-by: Matt Dumm <matt.dumm@hpe.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This parameter is still part of API spdk_sock_impl_opts
structure but it is not used. Keep it to support ABI
compatibility since it is located in the middle of the
structure and removing it may break socket opts initialization
or parsing.
Change-Id: Ib641ad7d965d68bc9ebb65dba531408d88cf6fa1
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8914
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Implement bdev_nvme_reset_controller rpc, which allows the NVMe
controller to be reset over RPC. Implement bdev_nvme_reset_rpc()
which starts the reset of the controller and returns the result of
the controller reset via the callback function after it completes.
Signed-off-by: Jonathan Teh <jonathan.teh@mayadata.io>
Change-Id: Id98d5e56feb315b7e44e9bb5e5f495e9b1cd1de0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8456
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Some packages include versioning in their name which is not very
friendly in case given package is upgraded - the name of the package
will always change in such a case. To avoid that, use globbing to
match on package names in a more robust way.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I3e23fc8a06f93471f47835e945c24c4a95f80795
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8741
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add exceptions to results parsing and fio run functions
to better inform what's the cause of the failure.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I94e51cb8f77515f7d26a75501011d6111820ae56
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8742
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Enable "kernel_engine" option for Kernel Initiator
class to enable ability to use io_uring engine on
initiator side.
For NVMe-oF this has limitations as apparently it's
not possible to enable polling on the initiator side,
which in turn makes fio "hipri" option also not
possible to use.
Adding #TODO sections with notes in case this is
later fixed in Kernel NVMe driver.
Signed-off-by: wawryk <maciejx.wawryk@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I31da52946692015237263abc77d8425b5eae5b98
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8134
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch is used to add the support for users to configure
use kernel or userspace idxd library.
Change-Id: Ie159b897bc9595894ad8f333168efaea6c2a3d78
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7332
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Now that we've deprecated the RPCs for a release, we can remove the whole
library.
Change-Id: I0f1a357fcfb3404efac39aa021928841c2f22ff1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4305
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
It's useful to determine what's being sent out to the server. This
may be relevant for e.g. openstack tests where currently it's hard
to see what tempest|cinder is actually doing, SPDK-wise, during the
tests.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ie32781621317dd65e3f6fbcfd5110e7dac337f04
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8489
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Since the trace files can get very large (several GBs), parsing them
using python's json module might require an unfeasible amount of memory,
as it needs to load the whole file first. The ijson [1] library
provides interfaces for parsing files iteratively, only loading a small
portion of a file at a time.
It requires the input JSON to have the tsc_rate and the definitions of
the tracepoints listed before the tracepoint entries. It's not a big
deal, as this is the way `spdk_trace` generates it, but it's worth
noting, as passing that file through something like `jq -S` might make
it unreadable to the trace script.
[1] https://pypi.org/project/ijson
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I03c0c3fb47091da615a3978b8d63edf4d876b811
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8275
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
This patch adds support for annotating qpairs. The raw pointer values
are replaced with a list of various properties of a qpair collected by
the bpftrace script.
A line like this:
`0 2856282624.000 RDMA_REQ_NEW id: r3256 qpair: 0x26ba550`
becomes (the line was only broken here):
`0 2856282502.669 RDMA_REQ_NEW id: r3256 qpair(ptr=0x26ba550, thread=2, qid=0, \
subnqn=nqn.2016-06.io.spdk:cnode1, \
hostnqn=nqn.2014-08.org.nvmexpress:uuid:729783b4ab38485d8d767b7741108a8)`
To annotate a trace, one first needs to enable and record the DTrace
probes:
```
$ scripts/bpf/trace.py --record `pidof spdk_tgt` > bpftraces
^C
```
Of course, the probe events are only recorded when the script is
executing, so in order to generate the annotations properly, it must be
started before the annotated objects are created. For instance, for
NVMeoF, it needs to be running before a connection is made.
After the BPF probes are recored, the traces can be annotated:
```
$ build/bin/spdk_trace -p `pidof spdk_tgt` -s spdk_tgt -j | \
scripts/bpf/trace.py -b bpftraces
```
For now, the script only annotates traces from the rdma module, as it's
the only one with tracpoints recording qpair pointers now, but it could
be extended to support more tracepoints.
Similarly, more objects could be annotated in the future by extending
the `SPDKObject` class and defining additional DTrace probe points.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I2225f4b1ab266b41af561b5e7d942411cd0c13c1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8107
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch introduces definitions responsible for generating bpftrace
scripts and parsing its output. That output will be used in subsequent
patches to provide annotations for SPDK traces.
The script has a hardcoded set of probe points that are used to generate
the bpftrace script. They're also checked against the probes present in
code to sanitize them and make sure that they're in sync.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I1b8c95e1a035bd7affed2c44b056828a5da94abd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8106
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
also remove out of support fedora31
Signed-off-by: wawryk <maciejx.wawryk@intel.com>
Change-Id: I2ec224a3fb3849eb62ba46a01aa74c62926174f8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8461
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Use extended regexp to resolve any potential ambiguity with matching
on '('. This should fix the following failure as seen on the CI:
fatal: command line, '^SPDK_RPC_REGISTER\(': Unmatched ( or \(
Also, since errexit doesn't see failures inside the process
substitution make sure we return from the function with a proper $rc
in case git fails early on.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ia03095e9cc8cf11602dafb5bef28265abb485704
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8577
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These are currently prone to false-positives especially in terms of
scoping. Consider the following:
foo() {
local bar=(42)
echo "${bar[*]}"
}
bar=43
foo
echo "$bar"
Some versions of shellcheck, including the latest, 0.7.2, complain
about $bar being reused as a plain string here. This is incorrect
since foo() holds its own copy of bar[@] hence the assignment which
takes place outside of it doesn't affect its content.
SC2178 can be mitigated be reversing the order of declaration:
bar=43
foo() { ... }
...
but the SC2128 still remains.
Currently, in our code majority of these warnings are coming from
false-positives due to initial source'ing which most of our test
scripts do (e.g. they fetch a function where local bar=() is used
and in the test itself $bar happens to be assigned a plain string.
This is still valid code).
To mitigate, disable these directives untill shellcheck is capable
of properly interpreting scoping when checking them.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ifbde973eae6e261d79e1c340eb28644bce5f4e45
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8503
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SC2030: Modification of var is local (to subshell caused by pipeline)
This directive is raised since the for loop (or rather its contents)
is piped through to another process. In this context it's not harmful
since we are interested only in sending the stdout but since we operate
on variables that happen to be local to the process that handles the
loop shellcheck sees that as a potential issue. To make it happy
remove the pipe and sort pci addresses prior running the loop.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I835c5ac1da9012129c5d01d62880307f70caab1b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8501
Community-CI: Mellanox Build Bot
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a first commit in the series addressing potential Bash issues
as discovered by the latest shellcheck release (0.7.2, shipped with
the very latest fedora33 and fedora34). The goal is to either fix,
locally or globally disable given directive(s).
SC2155: Declare and assign separately to avoid masking return values
Simplify the setting of the variable pointing at the root of the repo.
Also, keep it consistent with the rest of the scripts and declare it as
$rootdir.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I63e0b1a85ce16f7983e9ba6dd985046e8a39a650
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8500
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
On my system, the git grep for ^SPDK_RPC_REGISTER(
fails because the ( is unmatched. It seems we should
escape it, although clearly our CI systems don't seem
to require it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6412e27e79488616743f76b2d9eac8f62b996078
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8393
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This script will use the output generated by the spdk_trace app (JSON) and
replace some of the raw pointers with the information gathered through
the DTrace probes.
For now, this only prints out the traces without doing any annotations,
so the output should be nearly identical to what's printed by
spdk_trace. The annotations will be added in subsequent patches.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I406e8d4fde9cb88b31c38aa96f11b88e607e9436
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8105
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This will allow to match and compare the DTrace probes with SPDK traces
as they'll be using the same source for the timestamps.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I686c3351428c75f9b618a1a909836504fccad828
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8101
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Fix json config file using strip_size error, and
The strip_size parameter was changed to strip_size_kb in `bdev_raid_create`
rpc function in order to make it more meaningful to users.
Unify the coding style in rpc help file.
using --strip-size-kb --raid-level ... instead of --strip-size_kb.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I341af1034c7ea6716ff839bb524ee733c9e0cd34
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8401
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add three parameters, pdu_pool_size, immediate_data_pool_size, and
data_out_pool_size to the RPC iscsi_set_options to run iSCSI target
with little memory.
For some use cases, we want to keep the max number of connections,
but simultaneously we want to reduce the pool size and let I/Os wait
until resource is provided.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I74dc785310b1d985f3e338c1e13fba3a3840d113
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8191
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
As of latest qemu (>= 6.0.0) these can now be used together as
different BARs are used to accommodate for both.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Icf32f491fd33ef733f0d946f9b5caaeb87137d28
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8217
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Having pmr_cmdline set to nil was for some reason breaking cmb setup
as weirdly enough pmr_cmdline was ending up being set to "true".
Avoid this by having pmr_cmdline set to some value, empty string in
this case.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ib41da699dcc2f213f0b18d21be3fd32f398bae41
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8216
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The traces are tracking the lifecycle of a poll group: creating it,
adding and disconnecting qpairs, and finally destroying the group.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I075b7f24d14b8fbb42bb18ddd70a668a8bace118
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7158
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also add scripts/bpf/nvmf.bt to enable and log these
probes.
This patch also adds a script that can generate
a bpftrace script snippet with string maps for
needed enumerations (currently nvmf_tgt_state and
spdk_nvmf_subsystem_state). This allows us to
dynamically generate this from the source code, and
can be extended for other enums we may want to
add in the future.
Thanks to Michal Berger for converting my original
gen_enums.py script into gen_enums.sh!
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Iff34a6218aef40055ac14932eea5fc00e1c8bcf5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7194
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Source Windows specific definitions from common.sh. These adjust
uname to report the operating system as WSL, Msys or Cygwin and the
kernel name as Windows. They also define kill() to invoke the SIGTERM
handler before causing a hard stop with TerminateProcess.
Adjust the ordering of the 'source' commands in autotest_common.sh so
that the config definitions are available when common.sh is loaded.
Define MAKE, MAKEFLAGS and HUGEMEM for Windows.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: I130b892ee55c925a0b033bda271a29133993afb7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7101
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Change-Id: Ie46df6e4f52b59941a90eeb786954fe7d5f1d089
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8040
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is to make sure we sync devices for both nvmf and iscsi
protocols.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ifec6cc2d240a5b22b73e9f4087ae328568e4fe4a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8042
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Purpose: Let the users know the current available registered Rados
cluster and the related info.
Change-Id: I115c129ae6e4b0372579aad168fd88f8be136357
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7990
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In case the addr argument was not an existing unix socket file the rpc
client would consider it to be an actual ip address. As a result
connect() would be called with improper set of arguments. This could
cause the rpc.py to block for undesired amount of time until connect()
finally decided to return (seen on some fedora33 builds).
This was affecting sh wrapper functions like waitforlisten() which
use rpc.py to determine if given app is ready to be talk to blocking
execution of the tests for way too long then intendent.
To avoid such a scenario determine the format of the address and use
routines proper for given address family.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Iaac701d72c772629fa7c6478ff4781b0c5d485d5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7777
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
The openstack tests require to have one interface available under
specific ip, 10.0.2.15. This ip is a first lease VM receives from
the user network which is preconfigured in libvirt environment.
Use this instead of defining completely separate network which
by the very default will serve its own DHCP service as well. This
may result in a cosmetic issues (e.g. two ips, static one and
dynamic one on the interface) of having inconsistent config on the
VM depending on how the net device is configured by the underlying
distribution.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ie3da26eebcfb0de668166c4a0120c65aec104540
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7441
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
nvmf_subsystem_add_listener() in rpc/nvmf was modified
by 64debe0453 and the
change was not reflected in performance scripts.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I7bb8c39ab225421964e37883aa7b0f824e8df683
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7978
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This script counts how many times each syscall
is called by the SPDK application.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ife5efccee73e407e1d819293786f2acdfa317f78
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7713
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This script captures a histogram of the returned values
from the readv syscall. It can be useful for analyzing
the efficiency of our sock/posix implementation.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I910eb2e81e3416855cda7a3854982cd02476850e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7712
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This script tracks spdk_thread_send_msg and
spdk_for_each_channel calls. It also uses usym
to get the name of the function pointer passed to
these calls.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia0cf5b50538bd26a3e15e35cbab765fe3c327c73
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7711
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This script simplifies execution of bpftrace scripts
for SPDK application analysis. The script should be
invoked as:
scripts/bpftrace.sh `pidof spdk_tgt` script.bt
where 'script.bt' is the name of the bpftrace script
you wish to execute.
The script helps simplify the following:
1) replace __EXE__ markers in the bpftrace script with
the full path of the spdk executable (required for
usdt probes); it uses /proc/<pid>/exe to get the
full path
2) replace __PID__ markers in the bpftrace script with
the PID of the spdk process under analysis - this
allows for doing things like filtering system call
counts for just the SPDK process
3) invoke bpftrace with the -p <pid> option
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib271f26efe4ba326d951a7b30f61b22be755dda7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7710
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For now, we will keep this disabled by default,
enable with --with-usdt option to the configure
script. Long-term we will want to enable this by
default, and only disable via configure.
Modules can include spdk_internal/usdt.h and add
probes such as:
SPDK_DTRACE_PROBE2(probe_name, ptr, val);
When USDT is enabled, these will translate to
DTRACE_PROBE2(spdk, probe_name, ptr, val). When
USDT is disabled, these will translate to nothing.
Later patches will add some probe points to the
nvmf target, some bpftrace scripts, and instructions
for how to successfully capture data with these
probe points and scripts.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id168e2c800fa5522815a175026386319014cfdaa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7173
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Additionally, include the first resolved alias of the module.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I71c7c15398ea36f3dea3340f5c98568ff6b6a68a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7848
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Added 'rate_iops' FIO option to the performance scripts.
This will be used during tests where limiting factor
has to be artifically imposed, rather than come from
the target/initiator system or enviroment.
One case for this are scheduler tests, to limit
each connection and balance the threads accordingly.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I10bb09be9205a8b7ba90b36cd4e0bf922b0ecbc3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7840
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Revise bdev_rbd_create rpc call to add an optional
parameter "--cluster-name", e.g., "--cluster-name Rados".
Then users can create a rbd bdev with registered
Rados Cluster. This shared strategy can be used to
remove the thread creation overhead if multiple rbds
are connected to the same Ceph cluster.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ide5800f8fc6b2074805272a59731c666fe279b9a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7584
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch is used to add two rpc calls:
bdev_rbd_register_cluster
bdev_rbd_unregister_cluster
Then in the next patch, rbd bdev constructed on the same cluster object
can share the common Rados_t structure in order to remove the thread creation
overhead and improve the scalability.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I898cc4ffabb8e6721ba5bef099cbf948c64d2c98
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7551
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Current `test -f` never succeeds, because `/dev/cpu/0/msr` is a
character device file.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Iaa28f04866ab24140668ad43351a37f0ccccef65
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7166
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is needed before we can start looking up attributes
of the block subsystem under sysfs. In some occasions they
may simply not exist yet at a given time.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I4261d17e92e02acec31b8affaccd0aa11c2b851e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7863
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add {min,max}_cntlid to spdk_nvmf_subsystem, defaulting to 1 and
0xFFEF, respectively, and add nvmf_subsystem_set_cntlid_range() to
allow the controller range to be configured in the range [min_cntlid,
max_cntlid].
Also add {min,max}_cntlid to the nvmf_create_subsystem RPC to allow
the controller ID range to be specified when creating an nvmf
subsystem.
Signed-off-by: Jonathan Teh <jonathan.teh@mayadata.io>
Change-Id: I936db3bb0c9a38569063a6fd3c11df262dfad776
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7322
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
With https://review.spdk.io/gerrit/c/spdk/spdk/+/7684 there are no
more active uses of it in the test suites.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: If6f8227b68f1fe1a4038cec2b6107eac82ad44de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7698
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
fio.py simply wraps itself around fio and doesn't do anything that
would require python to be in use. Having it in a simple bash form
makes it easier to integrate it with autotest's common sh tooling
and to debug any potential issues with the underlying tests.
This also fixes#1919 by making sure only proper nvme devices are
selected for the nvmf targets.
Fixes: #1919.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I111d00df3c7b2517f431cae865e258a665c2ecb3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7684
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The changes in the nvmf_create_transport show
how this command parser work. And there have
two benefit for this changed.
1. Simplify the definition of rpc method. no need add
so many args anymore. Also it retains its original
functions, so we can also check the input args.
2. Make the rpc call more versatile, for example.
when user extend the subparsers(add new args
into subparsers), they can pass some private args
into the rpc method by command parser.
Signed-off-by: jiaqizho <jiaqi.zhou@intel.com>
Change-Id: Iaf916e3454f23715cf9216794bb80c65b2b4603f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6652
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Older version wasn't providing full support for PMR setup, this one
does.
Rewrite get-pmr such that it supports CMB/PMR sizes greater than 4GB.
Also, since CMB and PMR can coexist in newer versions of qemu try to
detect both under single device.
E.g.:
nvme0:0000:00:04.0:64-bit:prefetchable:0x700000000:0x707ffffff:0x08000000:cmb
nvme0:0000:00:04.0:64-bit:prefetchable:0x400000000:0x5ffffffff:0x200000000:pmr
nvme1:0000:00:05.0:64-bit:prefetchable:0x708000000:0x70fffffff:0x08000000:cmb
nvme2:0000:00:06.0:64-bit:prefetchable:0x600000000:0x6ffffffff:0x100000000:cmb
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ic159f5c12d3ef39db77617f7d64f825356c255a4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7539
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When zcero copy send is enabled and used by initiator,
it could significantly increase latency in some payloads.
To enable more fine graing configuration of zero copy
send feature, add new parameters enable_zerocopy_send_server
and enable_zerocopy_send_client to spdk_sock_impl_opts to
enable/disable zcopy for specific type of sockets.
Exisiting enable_zerocopy_send parameter affects all types
of sockets.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I111c75608f8826980a56e210c076ab8ff16ddbdc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7457
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
All JSON-RPCs must be documented in jsonrpc.md
Change-Id: Iec9119a01433fd0cbe4df4477ce94cc2feeb0d54
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4074
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Community-CI: Mellanox Build Bot
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I9b9f8c9e407425fdab1e84050354481ad76c19c2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6655
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Rename to target_nic_ip to better match NVMe-oF
terminology.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I0644410cfb063eeea740c54f5860aeefdb52d52d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7089
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
SPDK directory needs to be copied to initiator systems
earlier for set_irq_affinity to run.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I0f9ade02e58c9224e0b2ddc75117baaf653be614
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6776
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Need more investigating how to properly enable ADQ
for Kernel mode. Do not run Kernel + ADQ configuration
for now.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I700ef417b9b398c067a586a1a5ad9947a92057ad
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6566
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Readme was frequently missed when adding new stuff or
updating the performance script, and it is out of date.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I1710473be576ffbcc2fa8e3701b196bd46cf6654
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6538
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Create a default traffic class (tc0) with minimum
needed number of assigned threads and a priority class
(tc1) with number of assigned threads equal to
number of application threads.
Finally run set_xps_rxqs to configure symmertic queues.
set_xps_rxqs script used from Intel ICE driver
package available at:
https://downloadcenter.intel.com/download/29746/
Intel-Network-Adapter-Driver-for-E810-Series-Devices-under-Linux-
Change-Id: Ie0f2db266621a9dabb1621344bfdc5fa64fee03c
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6537
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
There are multiple cases for counting number of CPU threads
on Initiator side. Keep track of num_cores in all of them.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I4b8d1d79a2aa17706d206b149c1c8e8816ae2ef5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6536
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Set busy_poll to 0 for non-ADQ. Having it enabled with
this value results is huge latency increase.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ic68ed2b7dc19b8d4b274ce8622194489693863cb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7480
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
ld on some distros, e.g., ubuntu1604, doesn't include this particular
path in its SEARCH_DIR list. Add it manually to make sure linking
towards liburing is possible in such a case.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I82d7ed870ec9ff257dc72a386f950addb5476d1b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7022
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Added mainly to verify if the PMR setup on the VM is correct.
Example of an output with PMR device size of 32M configured for
two nvme devices, and one nvme device with 128M CMB.
[root@fedora31-cloud-1614680581-9ba06c102 ~]# /tmp/get-pmr
nvme0:0000:00:04.0:64-bit:prefetchable:0xf0000000:0xf7ffffff:0x08000000:cmb
nvme1:0000:00:05.0:64-bit:prefetchable:0xf8000000:0xf9ffffff:0x02000000:pmr
nvme2:0000:00:06.0:64-bit:prefetchable:0xfa000000:0xfbffffff:0x02000000:pmr
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I522cebd8b5a16f8a37c6e0e01a0288fb310467fb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7019
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Available in qemu >= 5.1.0. Note that since CMB and PMR share the same
BAR they cannot be used together. If both are specified, PMR setup is
skipped.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ia0c6681b5ac7563efc6c32d2fff1808814196676
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7018
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
-x is supported since 0.4.0 release, make a note of that.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Icc64132536c18108029f6c5fa2cbdd5b27018d8b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7417
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Change-Id: I4ed583d91ae9e820be1ee6f4553f29d6650c4922
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5791
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
num_cores name was misleading, as the parameter actually
contained core mask (or core list). Create separate
class attributes with core mask and number of cores.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ibfae7770aea2f2c1c720abf567400deb50028ab4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6535
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Save info about subsystems created subsystems (target
side) and remote subsystems (initiator side) into
a list.
Change-Id: I7ec1c6a4d1f75060b69b68e0b8e0dd61789fc9e0
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6374
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Run set_irq_affinity script after irqbalance service
is disabled and manually tune IRQs to be run only on
the CPUs local to NIC NUMA node.
set_irq_affinit.sh script must be manually downloaded
as part of https://github.com/Mellanox/mlnx-tools/tree/master/ofed_scripts
package before running tests.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I67b3c851bcf283caea29ad36f6d4bc0322ca0d27
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6534
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
In performance tests always use best performance policy.
Previously this was manually managed on test systems,
but it's better to do this automatically every time.
Change-Id: Iff81863cf8d9cc713a3c4cce1d8edf7ebbf81c84
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6373
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Modify CPU power management settings to achieve high,
consistent results.
Change-Id: I3602ae7523c5b83878238928caaeb453f7d2533e
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6372
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Tune sysctl parameters for TCP testing. Restore previous
settings after tests have finished. For ADQ-enabled tests
also set proper value for busy_read option.
Commit includes a fix to initiator exec_cmd() method to
allow using command parameters which contains whitespace,
otherwise it's not possible to set some of sysctl params.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I3376b69b8d7c0d8a282765db4fe55824f55f9e05
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6265
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Disable all unnecessary services which might affect
tests performance.
Managing services implemented in a very simplified way
usign subprocess and configparser modules (because json
output is not available). Proper implementation would
need to use a proper dBus API, but this seems like an
overkill for such a script.
Change-Id: I72feec4293b77442a9d2c9b4afaa032df1c4d5e1
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6264
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Configure NIC settings as per ADQ configuration guide.
Change-Id: I957aada267474c2a1448c89a1b7c81d4dd261ca6
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6263
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: If2784b74ece6c48b81cc53e63412cd2bc618ffef
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6262
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use common method name and parameters for calling
subprocesses for local (Target) and remote systems
(Initiators) instead of using "check_output" (from
subprocess module) and "exec_command" (from paramiko)
separately.
Having these functions wrapped by a single common
method will allow to create common methods in Server
class more eaisly, instead of creating two copies in
Target and Initiator classes.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I1c10f6a88f3d7300c227e969ad6fd901763ac52c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6261
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Parse the config file for "adq_enable" flag and enable
the option in SPDK Target and SPDK Initiator configuration.
At this point the flag has no effect on the generated
traffic, as the system and priority queues are not
configured properly. These settings will be added
gradually in following patches.
Change-Id: I5d7bc892f3aa7bbe691b7e0983294b56fcf994f5
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6260
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Get detailed info about NICs installed in servers. This
is using lshw utility to make things easier and not
implement the whole logic for parsing /sys objects and
pci.ids listing in system.
Change-Id: I97871fdc9feaae1c2485574a7b488b88ac3afc4f
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6259
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
The number of options for test execution grew high,
and we still need to add more. This results in a lot
of parameters to pass around in constructors, which
is hard to read and causes pylint to complain.
Instead of passing each option individually as a
separate parameter, pass them as dictionaries just
like they're defined in .json config file. This
makes managing the default values a bit harder, but
is more readable.
Change-Id: I5d88a2b7fe51d2df93edd9130678a937d34facdd
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6207
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
collect_devices() is split into two functions:
- collect_net_devices(): Collect ethernet net devs from the
net class.
- collect_rxe_devices(): Collect all rxe devices from the
infiniband class.
This is done in order to make handling of some conditions easier.
Case and point, in newer kernels, device/net link is not anymore
created for the soft roce devices, instead only ./parent attribute
is available. collect_rxe_devices() is adjusted to handle such
a condition.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Idefa39c4a62c9e650a03e237f49940461e9782a6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6992
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Put plugin parser into a separate function and use it to additionally
parse arguments passed to rpc.py via stdin.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I170d762ed9f5483d92b298f4804ee4e9f227a751
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7145
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Older losetup versions loaded "loop" in background, but
with 2.36.1 this doesn't happen. We know we're going to
use this module so let's load it ourselves.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: If3364e92817ae9f09e9897872bd61ca9167184a1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7086
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently, reference repos which are used to clone the SPDK repo in
the CI pool's systems don't provide master head refs, hence there's
no easy way to diff against it.
Instead, simply run shfmt against all the bash files in the repo.
Impact on the performance should be minimal.
Also, cleanup some related code which is not used anymore.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ie0d4e35b8ad214ceed1b4ea29b01a7423b8ff73b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6824
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is done in order to minimize vagrant work on the CI side. Users
may still provision given VM with full configuration includin these
pieces by running create_vbox.sh with -d argument.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I7f494958e06d4e3b047938dda0bd102da824d235
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6733
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
vagrant's shell provisioner uploads files to /tmp, however,
vm_setup.sh must be run from the repo to find all the source
files. This requires the repo by synced over to the VM as well.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Iaf16f066af10739589aa584f57c2b89f5c5202e7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I191ad5e3b153fb563256eba1aa695716f66db788
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6377
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Leverage SO_INCOMING_CPU to get the CPU affinity of connections
(sockets). And allocate the connections to specific poll groups,
which aims to utilize cache locality.
From our test:
6 P4600 NVMe on target,target uses 8 cores, NIC irqs are bound to
these 8 cores, and initiator side uses 24 and 32 cores,
we can get 11%~17% randwrite performance boost for posix, and 8%~12%
for uring.
Change-Id: I011e0a21502c85adcccd4a14fbe9838b43f54976
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5748
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We need to catch the JSONRPCException when we cannot
connect, so that the error message can be printed
more cleanly. Also suggest to the user that maybe
they don't have an SPDK application running when
it cannot connect.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I497bed86573d5bf07a2b48b3d6682a2427aa4987
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6754
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Also, for consistency, use check_for_driver() while checking if
igb_uio is loaded too.
Change-Id: I00302b3cab169c77032fc0cef0ea384e9e5eb5be
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5303
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
nvmf_create_transport rpc parameter to configure the CQ size helps
if the user is aware of CQ size needed as iWARP doesn't support CQ resize.
Fixes issue #1747
Signed-off-by: Monica Kenguva <monica.kenguva@intel.com>
Change-Id: Ia9ba2b5f612993be27ebfa3455fb4fefd80ae738
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6495
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
There's almost no benefit coming from it CI-wise since all our VMs are
already fully provisioned. The speed up of nightly jobs, which do run
package updates, is minimal. Overall, it only slowers deployment of the
autotest VMs.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I68d9530533f0b0d7d2fb72ce82706d6bc0cf2e6e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6637
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For OCSSD disk case we create two files, but only one was later
chown-ed.
Signed-off-by: Pawel Piatek <pawelx.piatek@intel.com>
Change-Id: I411f0717f5416ba012e2e90582b60ec892d2744e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6170
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
- throw error instead of silently skipping create disks on
non-linux OS
- early return/exit from script
- add quotes around disk name
- use case/esac to check WHICH_OS
- other small syntax changes
Signed-off-by: Pawel Piatek <pawelx.piatek@intel.com>
Change-Id: I71879bf635ecb275e805b6fcb3ec9d6bc3bc299f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6169
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also, add some minor tweaks for the add|rm routines.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I39cdbec2c0aca12e7077d8db161e65fdce7ca19f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6241
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Rationale behind e663dc82ad which put this package as a dependency
into pkgdep was that it shouldn't be exclusive to vm_setup.sh.
However, this particular package causes unnecessary kernel upgrades
whenever newer version is detected by dnf|yum. This behavior is out of
pkgdep's scope and as such similar upgrades should be performed via
vm_setup.sh only where its sole purpose is to configure system on a
wider spectrum.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I066105f95834f3f8d436b9ff52ec1f2bf97844af
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6437
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Interface names will later be needed for additional
test options.
Change-Id: Ic16d305a97087ab1fdc35d5fd5a3d1ed2a021d90
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6206
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
So far the information about remote target IP addresses was
stored in "nic_ips" attribute. Add a new "remote_nic_ips"
attribute to be able to differantiate which IPs are local
to given Server class object.
Change-Id: I03dac140241341996674b350c51c18da6e2ee447
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6205
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
It has been confirmed that there is no affected use case in
the SPDK community when we remove the range parameter from
the bdev_ocssd_create RPC.
Hence, remove the range parameter from the bdev_ocssd_create RPC,
remove range parameter from bdev_ocssd_create_bdev(), remove range
info from ocssd_bdev_config_json(), and then update unit tests
accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1b0a541b61bf26732fd028dc43becb7ca2384f8e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6220
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: Simon A. F. Lund <simon.lund@samsung.com>
Change-Id: I039a2e22a665e0d52082e6876f2c7c1cd9a336c1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6386
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Function bdev_nvme_create accpets new parameter - ctrlr
opts which is passed and filled by RPC handler. That
will allow us to add config parameters for other ctrlr
options with minimal changes.
Change-Id: I96ac1b21e7a3816c652765cddade75423eb843ca
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6023
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Checking only the .sh suffix was omitting ./configure and potentially
other bash scripts which don't necessarily have to include said suffix
in their name.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I6196559e8875de46f80d9c8426577a1a79b5996d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6026
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Recent builds with mainline DPDK failed due to missing
python dependency "elftools". This patch adds it to
our system provisioning scripts.
Fixes#1770
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I9e3879d9bddd64bb0f7be81120e5fadebefa9eb8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6103
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
If config without this field was used then
script resulted in KeyError exception.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Icf0b270d28dcc6bf44b66c4b9ed583a6b3ef08b6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6204
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Standard lib modules first, then pip installed modules
and local modules last.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: If0159fad29bab5bef0b69aa803e3cea429cc5f25
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6202
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Users can use "--with-vfio-user" to enable it when testing it.
For CI configuration, we add a new test flag SPDK_TEST_VFIOUSER
to enable CI tests.
Change-Id: Id284df721171d01cc52491ebf4088bcc17eee147
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6139
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added rpc to get name and period of currently set spdk scheduler
and name of currently set spdk governor.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I5562a81a7f9e4879bd48a765c9467f70b43f73ab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5917
Community-CI: Broadcom CI
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Using shell=True was unnecessary, as it spawned additional
shell process for any subprocess with this option set.
We don't need that in this script and it's generally
discouraged.
Also removing check=True from some calls as don't have
these subprocess calls in try/excepy anyways.
Change-Id: Ibb9b5d71119c9dd877209ea77b8351f9b610cade
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6046
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Instead enabling each measurement (cpu/power/memory) just
use a single flag and enable them all at once.
Change-Id: I8a639b697285aa741f28b5ddec11ce70c34fc760
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5980
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use terminate() instead of kill() to exit more gracefully.
Using kill() resulted in (sometimes) output not being saved.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I3ff1dec8cb0804f6e0674c5ed61bbe4ec9ea70ef
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6045
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
"measure_*" threads in script use the same results dir
as the results parsing function. To avoid race try to
create results destination directory early.
Change-Id: Ic391a7c2fb3decff64f1fdf51782abb940706d38
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6044
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
DPDK 20.11 moved the kernel modules to separate
dpdk-kmod repository. It has to be built separate
from DPDK.
If needed for testing vm_setup.sh script now contains option
to build this driver.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I98a5eb956eb0cc60ec402d88fcdbd66d4854f19a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6033
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Enable pcm-power measurements with appriate option.
This will be used for scheduler tests.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I57acc9905c6f1acd7bc3ecdbf886b209a2cdb653
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5979
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Users can now generate the necessary linker args for their
own applications using something like:
PKG_CONFIG_PATH=build/lib/pkgconfig pkg-config --libs spdk_nvme
Dependencies between libraries are included in the generated
.pc files, so the user only needs to pass the top-level subsystems
or individual SPDK libraries they are using in their application.
Modules will automatically be added to the output if the associated
library is specified. For example, specifying "spdk_bdev" will include
the libraries not only for spdk_bdev, but also all of the bdev modules.
Users still need to supply the -Wl,--no-as-needed or -Wl,--whole-archive
flags. They cannot be added to the .pc files without increasing the length
of the argument string by a factor of 15x to 20x.
Modify the test/external_code/hello_world Makefile to use pkg-config to
ensure this gets tested at some level in our autotest environment.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie48a75f11969d5d775d514cf10bcb82d197eabfd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4371
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Usually null bdev is used in testing.
The resize function provides flexibility
Change-Id: I603db0b85ff13a86d38ccc8dd6f260807393df93
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5797
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Period parameter is marked as optional in rpc.py. This works
as long the rpc call is issued with rpc.py, as argparse
sets period to "None" by default. This patch makes it
an optional argument as well directly in app.py.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I2e3cae6df7edd7fc6e1120ee3d4a2655dc60813a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5942
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Sections 'Nvme', 'Nvmf', 'Bdev' and 'iSCSI' were always present in
the output of config_converter. Even when they were not present in
the legacy config.
This posed an issue with iSCSI section. Support for iscsi_set_options
is part of lib/iscsi, that is not compiled with all applications
(such as nvmf_tgt).
Fixes#1741
This patch checks if there is corresponding section in the legacy
config, and only then presents the JSON output.
Added test to verify output from empty legacy config.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ief94e92115dbd80c890dcb434b7c6d5376421c9e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5879
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
JSON configuration that does not contain a particular
subsystem is a valid one. If needed, the defaults are always
present in the subsystem itself.
accel, interface, net_framework, scsi, nbd do not have
legacy configuration to convert. Including those in the
output of config_converter does not serve any purpose.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6442ac1b8f65ac7271102e782068846f86c2d09f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5878
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch is for packed ring and recover the ring
base when vhost target reconnect to QEMU.
Change-Id: I73f791b4a55adf9834112afd7dd7bb26c75a135d
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4128
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
JSON-RPC allows for methods that do not contain any params.
Turns out that so far this scenario has not occured for load_config or load_sybsystem_config
RPC, which processes JSON config file saved from previous app run.
Next patch writes out bdev_wait_for_examine to bdev subsystem
configuration. As that methods does not contain any params following
error was seen:
# /home/vagrant/spdk_repo/spdk/scripts/rpc.py load_config
Traceback (most recent call last):
File "/home/vagrant/spdk_repo/spdk/scripts/rpc.py", line 2671, in <module>
call_rpc_func(args)
File "/home/vagrant/spdk_repo/spdk/scripts/rpc.py", line 2601, in call_rpc_func
args.func(args)
File "/home/vagrant/spdk_repo/spdk/scripts/rpc.py", line 100, in load_config
include_aliases=args.include_aliases)
File "/home/vagrant/spdk_repo/spdk/scripts/rpc/__init__.py", line 143, in load_config
client.call(elem['method'], elem['params'])
KeyError: 'params'
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I4a56a9d0caa4b752fb9c1fad4ae581aad8a4c2c1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5860
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add spdk_bdev_wait_for_examine() API to be called
in order to report when examine on all registered bdevs finished.
It will be built in to most bdev modules RPC.
New RPC added to allow
- building it into bdev submodule
- user/orchestration to verify examination status manually
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I27db3ae42eea3e692faeea4c2a01d04586bff438
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5480
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
py27-pycodestyle was dropped and is no longer available for the
amd64 arch. Use py37-pycodestyle instead (it should be available for
other common architectures too).
Change-Id: Icb56860d358e2fa06f202a47302a5005b32708e3
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5877
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
This is done in order to track core dumps in a more efficient
manner. Till now, some cores could be missed if the binary was
executed outside of the cwd of the autotest (i.e. outside of
the spdk repo) but which was part of the critical path of the
actual test (e.g. fio in vhost-initiator tests). Also, since
core_pattern was set to plain "core", impact on the underlying
storage wasn't controlled either - if core was 20G in size,
this is what we would get. This could easly exhaust storage in
case error-prone patchsets were submitted on the CI side.
The collector will try to mitigate all the above by doing the
following:
- collecting all the cores, regardless of their cwd
- limiting size of the core to 2G
- compressing the cores (lz4)
Also, limit of 2 collectors executing at once is set - if more
processes crashes at approx. the same time, they will be logged
in the kernel log instead.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I5956a9030c463ae85a21bfe95f28af5568c5c285
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5369
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I1933b1c3026c86b55c3e2b712bff02fa8f711bc7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5446
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch includes the following work:
1 Add two fields in spdk_bdev_opts structure and make the
two fields configurable.
2 Update the unit test in bdev_ut.c
3 Revise the set_bdev_options rpc call and add the support
to use the two new fields.
Change-Id: Idd6073b3a3ffaba8161e3ffa9444a9e533e67f6d
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5664
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There are transport types like vfio-user or fc for which this field is
optional so there is no need to explicitly specify it for the add
listener rpc. Still validation of this filed is preserved for rdma and
tcp transport.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I6aef55bed45b3653472fd356e5a7cfead22c6f2b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5605
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This reverts commit 6d87bc7a8a.
There is an issue with the desing here i.e. lifetime of the subsystem
opts shall be associated with the subsystem but the transport specific
layer is not having any notification about that. As an alternative to
the transport specific subsystem opts listener interface was extended
in a previous commit.
Change-Id: I75c4e329e411a91694959db18ff1955774f0993e
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5571
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In recent Centos8 updates name of the "PowerTools" repo was changed to
"powertools". Since config-manager will fail if we provide a faulty
name of the repo, we need to make sure we tell it to enable what's
actually present on the system.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Iff0c6103d1375fc42f5c967cd713e3e5089f4723
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5478
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
If the sriov_numvfs sysfs attr is not available for given controller
report that. Also, verify if number of VFs matches initial value
of 16 devices. If not, report that as well. This number was also
being overwritten with the set value from previous device - this
could false-positive the confirm check so keep the set value in
a seperate variable.
Change-Id: I518464518dd75585c4692c8ec1b3268e798dcf6c
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5414
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
In case of latest fio versions "percentile" leaf for clat
latency measurements does not get created in case no IO
was run (e.g. write clat will not have "percentiles"
created in case rw mode was set to randread). This
caused KeyError exception when trying to access non-
existent dict key.
Change-Id: Ie0c28dc932481e5aab971505ba0f38b6798bff36
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5466
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The coming libvfio-user needs json-c and libcmocka library, so install
the libraries in CI environment.
Change-Id: Ib4871169a4d5b140cda11a2cc449201c963a9f12
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5287
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
cuse kernel module is not required to build nvme-cuse,
but any usage still requires it.
Packages for that were part of vm_setup script,
but should not be exclusive to it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia105454f65ee87ab3f56580c43d33214beac7b2a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5453
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Add keep alive timetout parameter in bdev_nvme_set_options.
NVMe bdev can set this value especially when we test with
bdevperf.
Fix github issue: #1690
Change-Id: I255c935671b74cdb615a8d393e7d7e84524f3c23
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5306
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is done in order to make sure IOMMU extensions, which DPDK is
looking for, are enabled.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ia9ff8e5329d14a5eb60721f08ff7063cfb1d6eb7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5259
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Mike Gerdts
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
master_core will still be available but deprecated.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6fe9eb7fecb2919795c439a02cb7d9d06a2774d8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5358
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
NVMf subsystems can have certain hosts that are allowed.
We were previously using the term "whitelist" to refer
to those hosts. Replace that usage as part of removing
this term from the rest of SPDK.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2878352d83f3911aa8b59629061b818c7f1e5c96
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5282
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
These replace the pci-whitelist and pci-blacklist params
which are now deprecated.
pci-blocked will still use the -B short name. pci-allowed
will use a new -A short name.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icf1c46c40ad6a0f49fb539b18cdd8d0c8daac636
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5281
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Similarly replace PCI_BLACKLIST with PCI_BLOCKED.
Use of ALLOWED/BLOCKED matches similar changes made
in DPDK.
While here, replace use of term "blacklist" with "blocked"
in one of the nvme perf scripts. The usage there was
associated with how devices are blocked by using the
environment variables that are changed by this patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I720d99118ba5e050f436612c9fd415db44294a63
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5275
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This can be done via explicit options on the
application command line instead.
This has the added benefit of removing a usage of
whitelist/blacklist which we are working to
remove from the SPDK repository.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5739e281f1c29fc8a5d175f5bbc916cd7d926fe4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5274
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
cmake is required by the coming libmuser, it's already installed
in some environments, here install it with more environments.
Change-Id: Ia7ce5ddaad95342e88ddcec327ac9c0eee51297d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5207
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If DPDK was not told to unlink the hugepage backing files during the
hugepage_init, the application will keep them open while holding a
lock on each file. Check if said lock is held, if not, remove the
file.
Change-Id: I738a3d7756c335b63388a2efeb03debd734d9c9e
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5065
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Main changes:
- By default, allocate all hugepages on node0. On NUMA-aware systems,
processes will most often use default policy with local node as the
preffered one for allocations. This usually is node0, thus splitting
hugepages evenly across the nodes, in default setup, would force
allocations from a remote node, impacting overall performance (in
case hugepages on node0 run out). See 68740678e1 as a reference.
- Introduce HUGE_EVEN_ALLOC - force setup.sh to evenly distribute
hugepages across all the nodes.
- Introduce HUGEPGSZ - overrides default page size
- Introduce CLEAR_HUGE - remove all hugepages on demand before
allocation is performed.
- HUGENODE - this now can be a list of nodes to use. NRHUGE will be
set across all the nodes from the list.
Change-Id: I084829edde3c416e7fc6b7b6abe369cc0631fcd7
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5042
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is done so user can easily filter out parts of the output which
are not relevant for additional processing (greping, seding, etc.).
Change-Id: I67eafd1fbeb723224cca6b0026e149cb7f85bfe9
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5152
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is done in order to improve the grepability of the output. Sort
is based on the BDF address.
Hugepages statistics are intact.
Change-Id: I121e9a46bfb1550380f233c1d5c06cefb9d4e7a9
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5022
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add an new optional parameter wait to the RPC, iscsi_create_portal_group
not to listen on portals until it is started explicitly.
Fixes the issue #1676.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic217f1ccceb618e70fdb2aff3f710d262a8a9bdb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5091
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add an new RPC, iscsi_start_portal_group, to start listening on
portals if the specified portal group is not started yet.
The next patch will add an new parameter wait to the existing RPC,
iscsi_create_portal_group.
The RPC allows the specified portal group to be already started,
and returns a success response in this case.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I631d6bccffb38092c95694f922f10648e24d6ff7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5090
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Each nvme BDF can have multiple namespaces, hence multiple block
devices, return them all.
Change-Id: I93fe8acf5b1904f05514445eb3e970ef4254caed
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5170
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
lsblk will include all the potential holders|virtual devices given
block device may be part of. This is relevant in case a nvme|virtio
device is part of the lvm|md setup.
Change-Id: I32198ddcf71746c3cbad4a96496a1762a5c201cd
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5167
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We don't use this script to create qcow2 images for our tests in CI.
Also this script is using random vagrant box images, and we don't know
what is inside them.
Script maintenance is a tedious affair because fedora boxes use xfs file
system, and we can not shrink them virtual disk to minimal size, and this
will caused fails in tests in future.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I7b35f16bbfd6135377995f7b20e1402d14b2b1b1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4738
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It could potentially override cmp binary, causing failures in some
of the tests.
Change-Id: Ia0bd88222c60e5b8a13d3809a6213b457b887b41
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5005
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We want to replace few qcow2 images with one universal.
This commit contains:
- change password in autotest.sh
- change image path
- change image name
- use snapshot mode in hotplug.sh instead of copying base image
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I75c457fe75f005b0ab43ca909be7886529ed115b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4551
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
In bdev_nvme_set_options command, timeout_us/retry_count/arbitration_burst/low_priority_weight/
medium_prioity_weight/high_prioity_weight/nvme_ioq_poll_period_us/io_queue_requests can be 0,
which should be passed in the rpc command.
Signed-off-by: Allen Zhu <allenz@mellanox.com>
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I2ebff51b7b7de418c5ac8fbd0265444fd27e1e10
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3816
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
in_capsule_data_size/buf_cache_size/sock_priority/max_namespaces can be 0,
which should be passed in nvmf_create_transport/nvmf_create_subsystem commands.
Signed-off-by: Allen Zhu <allenz@mellanox.com>
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: Ib557cf9f20f7ec2c0b3c31156cd79dbd670ce7e7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3815
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
