Implement support for full stripe writes without parity calculation.
The size and alignment of write IOs must be a multiple of full stripe
size. To reflect this, the raid bdev's write_unit_size is set
accordingly. We rely on the bdev layer to split larger IOs based on
that.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I6940280ad870f3bd678fd19346b06ba4bdadd52e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7702
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add new bdev property split_on_write_unit which, if set to true, causes
writes to be split to match write_unit_size and fail if not aligned to
or not multiple of write_unit_size.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: Id49f58a3288ddf5cfe4921ce4020ae4bcdd67298
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11390
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Move device cleanup to spdk_io_device_unregister() callback. This fixes
a case when the device would be freed before its last io channel was
closed, leading to use after free condition.
Repurpose raid_bdev_free() to actually free the bdev.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: Ib667b4d5ac1b34a0f2dda69f6b0775d9363dbfee
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11398
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Depend on bdev layer to send down chunk sized IOs, based on
optimal_io_boundary.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: Iec45f4917117d35c3a9e807940e49091dfcba870
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7699
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: If5369e76d5be42005a2c26d10c04dc0b03cb9092
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14665
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is the preparation to add virtio device test cases
with vfio-user target.
Change-Id: I08a33ac9cb6c1a6239841077facbf84927383814
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14647
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previously SPDK use libvfio-user library to provide emulated NVMe
devices to VM, but it's limited to NVMe device type only. Here we
add SPDK vfu_target library abstraction based on libvfio-user which
supports more PCI device types.
We will add virtio-blk and virtio-scsi devices emulation based on
vfu_tgt library in following patches, actually this library can
support NVMe emulation too, due to the fact that the NVMe emulation
is already exist, so we will keep the NVMe emulation which based on
libvfio-user directly as it is.
Change-Id: Ib0ead6c6118fa62308355fe432003dd928a2fae9
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12597
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This allows eliminating dpdk_pci_device_vtophys and
dpdk_pci_device_map_bar, reducing the amount of
code we need to maintain in the per-DPDK version
implementations.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I73d15eb75bf7fe8340d85494425e15651fec5425
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14722
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Refine the macro definition name about queue depth and
prepare for next patch.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: I85bee2528ae4ab70292fc11aa62d05bae0c28a77
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14664
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Delete bit masks from trace help (found inside
build/bin/spdk_tgt -h help text), as they do not
provide useful information, are much harder to
remember and use, and migh leave user confused.
Since we provide trace group names anyway, bit masks
are excessive.
Change --tpoint-group-mask parameter name to
--tpoint-group, because we do not provide
bit masks anymore.
Drop "default" tpoint group mask from help text,
since it does not enable any tracepoints and
may confuse the user.
Change-Id: I2ca780883dfa7822e76523e9ba1fc65a7bfe5a99
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14656
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Second vfio-user ctrlr is use to perform normal IO while fuzzing other
one, misbehaving ctrlr should not affect IO operation.
-Y <path/to/ctrlr> Path of addition controller to perform normal io
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: I11c34e97723f9359bacd7866a9828a6d89c74992
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13882
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This test has been recently failing in a way where atime is not
updated within the stat's %X resolution. Add simple sleep to
mitigate that.
Fixes issue: #2720.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I106357175028849ba037c9ee78c1e22a772fdfa3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14675
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: wanghailiang <hailiangx.e.wang@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add '-s 256' argument to 'autofuzz_vhost.sh' script. It was missed
in https://review.spdk.io/gerrit/c/spdk/spdk/+/14249. Reorder flags
to be consistent with test/vhost/fuzz/fuzz.sh
Fixes issue #2716.
Signed-off-by: Jaroslaw Chachulski <jaroslawx.chachulski@intel.com>
Change-Id: I86ddc0b841c3733d10b51b062e61b6168fa3f2ca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14672
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
During tests, the main portion of the app's time is spent in user
mode when polling is in effect. Currently, the idleness of given cpu
is determined in comparision to all the possible states the cpu can
be in. This makes it easier for third party processes to impact the
idleness of the cpu (as it may be lowered via different kinds of
loads).
For instance, if target cpu suddenly sees spike in a system
load (even up to 100%) it should not be relevant for the test where
it's known that the app's polling utilized mainly user mode prior
switching the scheduler.
With that in mind, if the general idle check fails, lookup the
raw samples matching the user mode and if the load is relatively
low (<= 15%) consider this as a pass.
Signed-off-by: Michal Berger <michallinuxstuff@gmail.com>
Change-Id: I4ab260d8bcf20a69f2f0be10f0fd7be577682be3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12909
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
By doing the registration immediately upon mapping the BAR instead of
when the memory is inserted into the spdk_mem_map, we're able to
register BARs that are not 2MB multiples in size and alignment. The SPDK
API for registering a BAR already returns the physical/io address in the
map call, and it can be used directly without a call to
spdk_mem_register().
If the user does elect to later register the BAR using
spdk_mem_register(), we attempt to insert the 2MB aligned segments we
can into the spdk_mem_map. Users may still need to register memory for a
few reasons, such as making spdk_vtophys() work, or for setting up the
BAR as a target for RDMA. These cases still require 2MB aligned and
sized segments.
Change-Id: I395ae8803ec4bf22703f6f76db54200949e82532
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14017
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Fixed error handles which are violated with spec:
1. 'data length > MAXH2CDATA' is a fatal error.
2. 'ICDOFF != 0' should abort the IO.
Other errors which are not defined in spec:
1. invalid sgl type
2. In-capsule Data length > In-capsule Data size
Because this function runs before data part receiving, it is hard
to skip the following data segment if we want to handle some error
as non-fatal.
Currently, we have to handle all undefined errors as fatal errors.
I think after this release, we can change receving process. This will
be helpful for error handling. But this work is not small.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: I8fc0d2d743505e49a93be19fd217e7ad6ca06622
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14580
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This test try to read/write VFIO_PCI_BAR0_REGION_INDEX register at
at random offset and with random data. A single test use four bytes of
data because most of the registers are of this size or double of that.
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: I2b541258a8514f24900e8cdad8af791e01de4cfc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14625
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add test to per-patch/nightly CI pipeline job
Change-Id: I6e1f92158ccc549967234a9a4e78330f2ccb9c9e
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13818
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch add tests that focus on fuzzing the control path of
vfio-user by imitate a misbehaving virtual machine. Test version
negotiation
Change-Id: I7179aad85d9181a1eb4d7f8805d030fcc775ed2c
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13819
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
A new RPC perform_tests has been added.
This request will help us avoid reading hotplug generated
logs, and instead we can stop hotplug right before
it begins generating IO, and resume it when the test
scripts are ready.
Additionally a new command line option has been added
to the hotplug application "--wait-for-rpc", which
indicates that hotplug should wait for
perform_tests RPC before starting its IO.
Change-Id: I71ca148201854ac155cc2a61171a4fb5fc427a19
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13962
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add test to cover issue where device couldn't be found on
non-first attached bus.
Signed-off-by: Artsiom Koltun <artsiom.koltun@intel.com>
Change-Id: Ie876596c56a08a6f9b5c8b2283dfd6399fd8fffd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14652
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: <sebastian.brzezinka@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In prep for adding both src and dst iovec support for compression.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I704b8d2bd459de03deb7f8ee45d76261910a3727
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13746
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
A new parameter io_drain_timeout has been added to spdk_bdev
structure. If this value is unset, the bdev reset behavior
does not change.
The io_drain_timeout controls how long a bdev reset must wait for IO
to complete prior to issuing a reset to the underlying device.
If there is no outstanding IO at the end of that period, the reset
is skipped.
Change-Id: I585af427064ce234a4f60afc3d69bc9fc3252432
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14501
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
nvmf_vhost test verifies multiple components at once.
In this case the number of NVMe-oF I/O qpairs per controller
is limited to just 4. When a VM connected to the vhost_tgt
is booted, the vhost controller is started/destroyed multiple
times. The quick succession of getting I/O channels and
asynchronous nature of NVMe-oF qpair deletion/creation,
results in exhausting the free qpair ids.
There is no reason to limit the number of NVMe-oF I/O qpairs
in this test. If there ever is a need, a new test could be added
exploring behaviour of components (like vhost) when get I/O channel
fails.
Fixes#2517
Change-Id: I32455c0499a1b79c82f921aaac193a83bd9cb468
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14626
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Instead looking up the pci bus extract the info from the nvme
subsystem under sysfs. Also, remove deprecated commit about
buggy kernels - this shouldn't be the case for newer releases.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I0ef46eb3b1935bd5bf86f7b06f9310ca8f1a1a2b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14592
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Id77e499d25452bc07d595ed41e683c99082babd9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14242
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
test/sma verifies that bdev-based QoS settings are correctly applied on
vhost devices.
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: I1b66275dcf457295e6ae58814f1d08ed319fb52a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14338
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
test/sma verifies that bdev-based QoS settings are correctly applied on
vfio-user devices.
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: I0109bfdbcb95d6e683c45c3dbdb2c3c175f10aa2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14337
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
The test verifies that bdev-based QoS settings are correctly applied on
NVMe/TCP devices. Other device types supporting bdev-based QoS will
share most of the code, so NVMe/TCP is a good test vehicle, as it's the
easiest one to set up.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ic715483e888a7219fd27367d527201d75e8b69a2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14270
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
hpda value should be in range of 0 to 31.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: Ie1329c831af06ccc8943a562c3f6396b635be518
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14575
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Currently, fedora36 is shipped with the 5.19 kernel.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ia575e5063aa98819ed0e66ffee1e0aaac995f4fa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14244
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A logic has been introduced to skip hole in files and
bdevs and so to copy only data. For files lseek is used, for
bdevs new bdev API spdk_bdev_seek_[data,hole].
Show progress function will display only affected size_unit
Signed-off-by: Damiano Cipriani <damiano.cipriani@suse.com>
Change-Id: Ide2b0d825267603d45e00872ea719c8f0e82a60c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14363
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently we run the remove_attach_helper() function
in the background and hotplug application in the
foreground - if hotplug hangs unexpectedly, the whole
script will freeze.
This patch pushes hotplug to run in background to ensure
the control over the whole test is on sw_hotplug.sh
script's side. This way we can enforce a timeout and
stop the execution.
Change-Id: I5ae5e4e029f65faf5d41e2f7e1d576823d30ac33
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13407
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Prepare Beetles to use all available GPIO lines to
manage NVMe drives.
The two reasons are:
+ we want to test multiple NVMes instead just one
+ setting all GPIO will make it easier to physically
connect NVMe connectors to Beetles
Change-Id: I0351dd2e7cfef0a75eff0692be3c746ad1b5664f
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13748
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
This is consistent with the use of terms in other parts of SPDK and fits
with the code living under module/
Change-Id: If182f7cf2d160d57443a1b5f24e0065f191b59b2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13919
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I24ab10a3021d52e71bb20cd2cdf748fa8713339c
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14523
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
After a controller was hot-removed, if a reset sequence started to
the controller, spdk_nvme_ctrlr_disconnect() failed and caused core
dump in debug mode.
When implemented, how to cause the failure and how to process the
failure were not clear. Hence assert was added to detect the
failure.
We know how we cause the failure now. Let's handle the failure
appropriately.
If spdk_nvme_ctrlr_disconnect() fails, we are on the nvme_ctrlr->thread.
Hence call bdev_nvme_reset_complete() with failure immediately.
Even if spdk_nvme_ctrlr_disconnect() completes synchronously, the
completion callback is executed asynchronously when polling an adminq.
Hence set the completion callback only if spdk_nvme_ctrlr_disconnect()
succeeds.
Fixes issue #2632
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I11f61853aba9eca2515592f964a291e59def7247
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13892
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
nigthly tests
It will allow tu use veth devices for TCP transport
Signed-off-by: Jaroslaw Chachulski <jaroslawx.chachulski@intel.com>
Change-Id: Ia3d945b9ff3e7eb9f4cd8489d933757704f51ef2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14579
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
psh len is not the same with header len.
Add an assert in nvme_tcp.c to prevent this happen again.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: Ibc250752bedf3da8994f79c51fb01577a222d364
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14521
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This "if" is of no use here.
The state machine has the "NVME_TCP_PDU_RECV_STATE_AWAIT_PDU_CH"
state means the pdu does not receive enough length of header.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: Id50943f77b570fd337e2bb4e3b45281018d159e4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14504
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
These functions used to allocate resources
using calloc/spdk_zmalloc depending on the
g_nvme_hooks pointer. Later these functions
were refactored to always use spdk_zmalloc,
so they became simple wrappers of spdk_zmalloc
and spdk_free. There is no sense to use them,
call spdk memory API directly.
Signed-off-by: Aleksey Marchuk <alexeymar@nvidia.com>
Change-Id: I3b514b20e2128beb5d2397881d3de00111a8a3bc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14429
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Since now cmds and rsps buffers are allocated
from huge pages, there are already registered
MR for this memory. In that way we can avoid
registering 2 additional MRs per qpair, just
perform memory translation to get lkey.
Signed-off-by: Aleksey Marchuk <alexeymar@nvidia.com>
Change-Id: I2cb39a15e5d224698c293ac18af00a909840eaa8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14428
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The target application is shutdown shortly afterwards anyway. This
prevents an intermittent failure in the lvol layer in the meantime.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I8913dff33bea985400c85fc477c6d2a7876593d3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14574
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Adds user write throttling - since writing to cache must be balanced
against the ability to compact the data to the base device, this
throttling mechanism allows for a smoother, more stable performance
levels - tying the user write speed to the compaction drain speed.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: Ia85efeb387f17c6c080b23ae4e658a6d7e47a2fb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13392
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add gathering of some performance counters and RPC for printing them.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I2e77d37fb66459240ff2e241f2b1f77c60f4eef4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13390
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Layout of metadata will be part of the superblock at the end of the upgrade.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: If888866806e948ee07f0777612da73ab8b7548b1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13385
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This moves the only references to the rte_pci_device
data structure from memory.c to pci.c. This helps
prepare SPDK for possible changes to DPDK around
visibility of these DPDK data structures, making it
easier for SPDK to manage if only one file is
affected.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I26b1907fabd7a6c23701523811abd1ce12606683
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14530
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Following discussion in a recent SPDK community meeting,
it was determined that we no longer need to carry ISA-L as
a user configuration option. It will be enabled by default.
If running on an architecture that ISA-L isn't fully supported
on, the configure script will disable associated features and
display a warning and will also not build ISA-L. Same case if
there are issues with dependencies.
Note that --without-isal is no longer supported as a configure
option.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ibd1e5e9454d1b090462c3e757b2f51c52e6cb774
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14393
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When doing live migration, there are some spdk_nvmf_ctrlr internal
data structures which need to be saved/restored, these data
structures are designed only for vfio-user transport, for
the purpose to extend them to support other vendor
specific transports, here we move them as public APIs,
users can use SAVE|RESTORE to restore a new nvmf controller
based on original one.
And remove the register from vfio-user transport, these registers
are stored in the common nvmf library.
Change-Id: I9f5847ef427f7064f8e16adcc963dc6b4a35f235
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11059
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This test is static in nature and not dependent on actual nvmf setup
that comes from the CI - everything is driven via a static json config
that comes with the test itself.
Instead, keep fuzzing directly in autotest.sh, under a top dedicated
test flag SPDK_TEST_FUZZER - this should allow users to run only
fuzzing part without touching the majority of the nvmf suite.
Change-Id: I9c33c46e05f7c4b977b041673fe200d9d2989265
Signed-off-by: Michal Berger <michal.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14287
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Both tests sma/vhost_blk.sh and sma/vfiouser_qemu.sh
use two spaces indention for JSON
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: I59aedabe40852d45a606c82a875a49a182137f91
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14293
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: I72c1340d927101d171509b1a42c4f14c0f7dc3e9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13998
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The test uses bdev_crypto and vfiouser devices to verify that
volumes with crypto parameters are correctly attached
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: I9abed43f3df803870af11d7f28601f5f9390474c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13997
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: I55d58a5959d5b67d99c2e2dfd9ea787a1e31b023
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13996
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The test uses bdev_crypto and NVMe/TCP devices to verify that volumes
with crypto parameters are correctly attached and any errors are handled
as intended.
It starts up two spdk_tgt processes, one is being orchestrated by SMA
and the other one acts as an NVMe-oF target. This ensures that we can
verify that SMA terminates discovery service connections whenever a
failure occurs during crypto setup.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I74001c256d4a05d2d8d295fb6fd8375d30ab66a1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13873
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I25cff079e021418ec66c6d04cfd5a3daf969ed77
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14154
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch defines the interface for crypto engines, which provide
support for configuring crypto on a given volume. Only a single crypto
engine can be active at a time and it's selected in the "crypto" section
of the config file. Similarly to device managers, external crypto
engines can be loaded from plugins.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Id942ef876e070816827d7ad1937eb510a85c8f8d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13869
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <sebastian.brzezinka@intel.com>
For most of apps, -o is for "io size in bytes",
-s("io size in bytes") was changed to -o a long time ago.
-s is now for "memory size in MB for DPDK".
Change-Id: I0977d4a7bc30a4f2e135707ff6e77b6254240fb9
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14533
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Currently we use 5 seconds as a timeout inside rpc_cmd's
"while read" loop, which is enough for a system with
a single NVMe. That value is insufficient for machines
with more devices and causes the timeout, erroring out
the tests (verified with the same number of devices,
as in the CI node with the most NVMes available - 4).
For that reason increase the read timeout to 15 seconds.
Fixes#2641
Change-Id: If7e9fd169a75ea16ec243c63821a4e5d70995063
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14525
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We do not need to force usage of 4096MB of memory for these
tests. Let's just remove how that is being forced.
This allows us to also remove the setup.sh call from
the spdkcli test common.sh script. Its only purpose
was to increase the amount of memory allocated to satisfy
the spdkcli tests, but now that the spdkcli tests aren't
forcing so much memory to be allocated, we can remove
that too.
Fixes issue #2694.
Note: these limits were in the original commit for the
test scripts - 7e8206c - but it is not clear why they
were added instead of just relying on DPDK dynamic
memory allocation..
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2210765e69117205a039aa6bc468efa5d5d537cb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14520
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For vfio-user tests, SPDK NVMeoF target uses "0xF"
as the core mask, so we should avoid to use these
cores when starting VMs.
Fix issue #2600.
Change-Id: I1927cd70670b30d59944d5571bcfc37c9e7e35d6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14485
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Fix mkfs fail when using lvol as backend of nbd.Predefined
NBD_FLAG_SEND_FLUSH and NBD_FLAG_SEND_TRIM are defined by default,
so the operations of trim and flush are supported,but in fact lvol
doesn't support trim and flush operations.Therefore add judgement for
NBD_FLAG_SEND_FLUSH and NBD_FLAG_SEND_TRIM to check.
Signed-off-by: Xinrui Mao <xinrui.mao@intel.com>
Change-Id: I3d21034d12a038c8fc694d3383028103239ea6bd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14099
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Each VM will be placed under dedicated cgroup pinned to proper set of
cpus and mem nodes as defined in the provided configuration.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Id5d284ee9cbde541b8344ab38c3f77aa5430b1b1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13704
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I6b6baae849a472599adc36a04d268a7a65979b41
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13703
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
state change function do not need to use swtich to do some work.
Do memset in state machine.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: Ie66454d8f31860f403171f20858a6b4a24e3c76f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14502
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
The new API will be used in the next patch
to prevent calling metods for the seconds time
when subsystem is initialized with config file
Signed-off-by: Aleksey Marchuk <alexeymar@nvidia.com>
Change-Id: I60ac8196e46ccb3b22b3af0607e1ba35a11a66a6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14406
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Two functions have been added to implement bdev io type
SEEK_DATA and SEEK_HOLE. Blob functions to find next
[un]allocated io_unit are used
Signed-off-by: Damiano Cipriani <damiano.cipriani@suse.com>
Change-Id: Ic3be3c0c86bd3010a23ba2681f0f00c62abcaaba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14362
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
These functions start from a given offset and seek for next
data or for next hole. For bdevs that do not support seeking,
it is assumed that only data and no holes are present
Signed-off-by: Damiano Cipriani <damiano.cipriani@suse.com>
Change-Id: I6bc831970223333b25683f60ce3fcbbfebb5bb81
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14361
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
These functions start from a given offset and seek for first
io_unit belonging to an allocated cluster or first io_unit
belonging to an unallocated cluster
Signed-off-by: Damiano Cipriani <damiano.cipriani@suse.com>
Change-Id: I0c632e2b3dfd2e96aa22e21796e25a36f2f55f9f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14360
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Adding `psk` field to `spdk_nvme_ctrlr_opts`
Adding `psk` parameter to `bdev_nvme_attach_controller` RPC
Change-Id: Ie6f0d8b04ce472e6153934e985c026acded6cdfc
Signed-off-by: Boris Glimcher <Boris.Glimcher@emc.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14046
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also give an error log when the g_timeout_in_sec parameter
isn't set but g_abort is set.
Fix issue #2643.
Change-Id: Iafd9e94952319b89891e37bc6e9e0db6892ddd7d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14435
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The failed stack:
The calling processes:
spdk_nvme_detach_async->nvme_ctrlr_detach_async->
nvme_ctrlr_get_ref_count->nvme_ctrlr_proc_put_ref->
nvme_ctrlr_remove_inactive_proc->nvme_ctrlr_get_current_process->
nvme_ctrlr_remove_process
The proc->active_reqs list processing steps:
spdk_nvme_ctrlr_process_admin_completions->
spdk_nvme_qpair_process_completions->
nvme_transport_qpair_process_completions->
nvme_pcie_qpair_process_completions->
*nvme_pcie_qpair_complete_tracker
*nvme_pcie_qpair_insert_pending_admin_request
and
*nvme_pcie_qpair_complete_pending_admin_request
Issue assert:
assert(STAILQ_EMPTY(&proc->active_reqs));
The assert means there are outstanding active requests in
proc->active_reqs list.
According the test app's coding style, it needs to foreach the dev and
complete the outstanding commands before spdk_nvme_detach_async
especially it launched spdk_nvme_ctrlr_register_aer_callback .
Bring the aer tests back, to check it.
Fixes issue #2674.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Ic0d3946f8c8743155cf3067aea1c9b4676748d2f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14433
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Adds ability to send trim commands to FTL - only 4MiB aligned requests (both
for offset and length of request) will be processed. During a trim
operation an L2P page (containing 1024 4B entries, 1 per user LBA; which
is where the 4MiB alignment comes from) will be marked as unmapped.
After this point any L2P access to that page will actually set the
entries themselves as FTL_ADDR_INVALID. This is done to make the trim as
fast as possible, since for large requests it's probable that most of
the L2P pages aren't actually in DRAM.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I4a04ee9498a2a6939af31b06f2e45d2b7cccbf19
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13378
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add additional tests checking against dirty shutdown recovery. Also adds
'write after write' test - checking if two simultaneous writes to the
same LBAs return the same data before and after dirty shutdown.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: Idcf9b51d9c00d0d065f7e9655387668f5eeb646d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13376
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Changing tests to using spdk_dd instead of using mounted nbd and dd on
it. Should be faster.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I17ffeae8441ba37d8e3348c715889fb568e8cd88
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14425
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We do not support dynamic memory allocation with the virtio-user
library - it results in SET_MEM_TABLE vhost messages for every
change which is not supported by the vhost target.
Add '-s 256' to vhost fuzz script, to ensure it does not
violate the new restriction.
This is a follow-on patch for issue #2596.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If851f53d7d670ac8443f0d9c8f4e3cbe82e0df7c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14249
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <yidong0635@126.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Use waitforserial_disconnect to wait for all nvme disconnect operations
to actually finish.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I91f410d9a84db33cf5d8e9d7ecdd4e7a7003aae0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9314
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <yidong0635@126.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
These checked parameters are necessary themselves even for single path
configuration.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ie1eb2f51eeec1dbc634c6bae462a41d4c209d6ac
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12052
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <yidong0635@126.com>
Community-CI: Mellanox Build Bot
Since commit: eaebf84102
rpc_py is defined in autotest_common.sh.
To avoid overriding the variable, move its declaration
below source commands.
Change-Id: I4f4e59120d4202c00a9fd2c685f3bf4febae48a5
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14387
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is done in order to have a bigger picture on the state of the
system (especially the phy nodes) when the autotest suite fails.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ib6e0b740b616284bda48ed82d92ac32236acaa3d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14261
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since base device doesn't require VSS, FTL introduces a mechanism that
will allow for recovering both the P2L and write pointer of open bands
after a dirty shutdown. After writing 1MiB of data to a band, a 4KiB
block describing the P2L will be persisted to cache device, effectively
emulating VSS for the base device.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: Ic6be52dc09b237297a5cda3e752d6c038e98b70e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13367
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Track the relative sequence of opening and closing bands and chunks.
Necessary for detecting the most recent user data during dirty shutdown recovery.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I682030e58284d7b090667e4e5a9f4bbc7615708a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13366
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
rpc_cmd function does not tolerate piping arguments into it,
so code execution skips the parts responsible for generating
a return code. The code is equal to nothing or "", which then
is compared with a value, ultimately erroring out the whole test.
To avoid these problems restore rpc_py varible declaration
in multiconnection.sh and ext4test.sh scripts.
Additionally added a comment in compress.sh to match ext4test.sh
and multiconnection.sh.
Change-Id: I4fb5f737d4e97d602f522b810363bc0d4522bf0d
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14356
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The word engine was both used (interchangeably with module) to refer to
the things that plug into the framework and to the framework itself.
This patch eliminates all use of the word engine that meant the
framework. It leaves uses of the word that meant "module".
Change-Id: I6b9b50e2f045ac39f2a74d0152ee8d6269be4bd1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13918
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
For non-fabric controllers, the corresponding I/O qpairs are simply
re-enabled at controller reset.
This had a issue when I/O qpairs span multiple threads and poll group
is used.
spdk_nvme_ctrlr_reconnect_poll_async() calls
nvme_transport_ctrlr_connect_qpair() with qpair->async being false.
Then nvme_transport_ctrlr_connect_qpair() calls
spdk_nvme_poll_group_process_completions() until the qpair is connected.
spdk_nvme_poll_group_process_completions() may poll other qpairs.
This may cause I/O to complete on a wrong thread.
For PCIe controller, spdk_nvme_poll_group_process_completions() calls
spdk_nvme_qpair_process_completions() simply for each qpair.
Hence change nvme_transport_ctrlr_connect_qpair() to call
spdk_nvme_qpair_process_completions() if the controller is non-fabrics.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ieb270c2fb154124021ef6d25577b817d05e5ca9e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14295
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
There's no reason for this parameter to be non-const and it makes this
functions pain to use when you want to hardcode a specific sock
implementation.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ifed4426a02ab54cbd51c8a2051b1eac010f86db9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14303
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
If the being disconnected qpair is the last of a poller of a poll group,
CQ is destroyed and the poller is released before the qpair is actually
disconnected.
This patch destroy CQ and release the poller after the qpair is actually
disconnected.
One exception is when spdk_nvme_ctrlr_free_io_qpair() is called to a
connected qpair. In this case, the qpair is removed from a poll group
before the qpair is actually disconnected. In this case, destroy CQ and
release the poller when the qpair is removed from the poll group.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Idf266bbb6dbb40f04ae6313db724fabf80865763
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14253
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Additional tests testing clean shutdown/startup capability (both fast
and slow shutdown paths). Additionally FIO tests can now run on the same
FTL instance, instead of creating a new one for each test.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I20cbd2fe0303b3e75bf7efca1623e223e2611f17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13365
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Adds necessary functions for setting up the state of FTL components
based on loaded in metadata.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I3a4c05230c877850e61d4f31d495d38121d27b3f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13362
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
L2P cache allows for partial storing of L2P in memory, paging in and out
as necessary, lowering the total memory consumption.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I727fec9d2f0ade4ca73e872d62a2ec10cfdb0a88
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13353
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add parsing json as invalid cases:
1.json content that not enclosed in {}, it should be parsed as invalid, e.g.
"abc":"not encloesed in {}"
2.json content that 'subsystems' not associate with array, it will report error and return failure, e.g.
{"subsystems":"123"}
3.handle other invalid json formats, report and return failure, e.g. duplicate keys.
Added `spdk_json_find` API return errcode: EPROTOTYPE - json not enclosed in {}.
json config with content:
1."not enclosed in {}"
2."'subsystems' not be an array"
3."duplicate key in json"
and some other invaild cases will be regarded as invalid json config, and will fail to start app.
Fixes#2599
Signed-off-by: tongkunkun <tongkunkun_yewu@cmss.chinamobile.com>
Change-Id: I02574c9acd7671e336d4c589ebbff8ed21eb3681
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13754
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This reverts commit 0c30154eb5.
Make a change in the revert to pre-allocate 1GB of memory for the
spdk_tgt initiator process, which is required for the virtio
initiator.
Fixes issue #2596.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id594fa1ccb2daf535b1aaaef0a397bda2ec98579
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13828
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add a new test to sw_hotplug.sh based on SPDK target
in addition to examples/hotplug application.
Change-Id: I352ee4dfe934fa88082101bb92c6db41da10c10c
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10088
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change rpc_py to use rpc_cmd function.
The former needs to be defined explicitly in the scripts
that uses function, while the latter is a function
already available in autotest_common.sh.
Additionally delete unnecessary rpc_py declarations
and override rpc_cmd where additional arguments are
needed (like -s sock_name.sock).
Change-Id: I835f7eb308cd77658a2a425e153ab7ca460b5b61
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12872
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The new name is consistent with the naming scheme of
<subsystem>_<action> that all of our other RPCs use.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I2cae7af5715add8eba26501cd192a6ac4884ec69
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13952
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Tom Nabarro <tom.nabarro@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This makes it possible to notify other PCI device providers (VMD) that a
PCI device is no longer used. The VMD will driver will unhook that
device and free any resources tied to it.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I42752afbb371a1d33972dac50fd679f68d05b597
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13887
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tom Nabarro <tom.nabarro@intel.com>
Now that we have a attach_device() callback, the devices can be hooked
during spdk_pci_device_attach(). With DPDK, driver->cb_fn() is called
in pci_device_init(), so we need to do the same in
spdk_pci_hook_device().
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Iada8b83ce7592aa62561530192072a50ec3a904b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13884
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tom Nabarro <tom.nabarro@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I5aa53d0d06564030a3dbae8a8aa5c6179e972980
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13713
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ibb713d5a597c83730cc81f8ab2d7a16334407ff8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13740
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
In this particular case, error() is called before it's declared,
hence bash complains that it's missing, failing to print out the
actual error message.
To not shuffle code around, simply replace this call with an echo
to stderr.
Signed-off-by: Michal Berger <michallinuxstuff@gmail.com>
Change-Id: I6f0a6e5b0dfd6893aee6a66e6efdb9874245fafb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12427
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
bdev_nvme_create_bdev_channel_cb() did not initialized the multipath
policy of the newly created channel. 0 was active-passive and hence
multipath policy was always initialized to active-passive.
Fix the bug and add unit tests for verification.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I6e44108740da4b9ff72311ae4b5500558c65c5c3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14225
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Admin passthrough supported retry and failover as same as I/O by
using the bdev_retry_count. However, doing retry or failover for
admin passthrough may have unexpected side effects and its value
is not clear. The safest way is to limit retry and failover for I/O.
If we need to support retry and failover for admin passthrough,
restore the code and add a new option bdev_admin_retry_count.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I680513a40a80041f6ea6f546c74c672f2a81812d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14227
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Adds a debug function, that scans the whole P2L of band, when
it's getting closed. The P2L is compared against both L2P and
valid map to check for any discrepancies.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: Ia4d7be65415e6af3752d676de69b6fdcb73effb4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13352
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Adds P2L validity map tracking - a bitmap marking all physical LBAs
as containing valid (current) user data or not. A clear bit denotes
the location has no valid data and may be skipped during relocation
or compaction. A set bit means it may have valid data (it's still
necessary to do the necessary comparision against L2P).
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I6a831a97b3080eb7c880d9c4feab41b523467885
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13350
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Adding API for the bringup part of fast shutdown/startup. Adds
shared memory utilization for necessary functions during initialization.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: Iab2da102fd0ccaa56fbdb9b3c765be5eeefff145
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13349
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Stores P2L map of open bands in shared memory, allowing for
faster recovery times from application crash.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I519441af05e4d0f57768835bf01c800556873c58
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13347
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Allows for using shared memory in memory pools. Adds API for
accessing such pools after dirty shutdown (claiming them, ie.
marking an entry as actively used; calling the
ftl_mempool_initialize_ext will reclaim all unused entries back
to the pool). Also introduces API for accessing objects, since
using direct pointers is not possible (as addresses may change
inbetween application startups).
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I5325b39d68aef7e231945cee9d92c925cab2fb2a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13346
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Main use case is to allow for keeping it in shared memory, to
speed up the recovery time after application crash.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I36b6b8331cd6483c5bd202e5f9103c351d705da8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13345
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Relocation will
1. Read LBA map of a given band
2. Pin the LBAs
3. Issue writes of valid LBAsto the new location
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: Ie753a790e56a86bfa1e451b5eda78b88eeacd3cb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13344
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We've had a few more issues with the AEN tests since
they were recently enabled (#2660, #2662, #2664, #2674).
It looks like #2674 is the only one still open, but
it's causing a lot of failures in the test pool so
let's disable the tests again while it gets root
caused.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib57240e176a05f9b99856ceb6d0bf8afcb24ff95
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14245
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Updated the existing nvme aer test to only print information
about AEN one time per controller. If the SSD is slow to
reset the temperature setting, it could continually generate
AENs and spam the output logs.
Fixes: #2660.
Fixes: #2662.
Fixes: #2664.
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Change-Id: Ibbaa9c54bd5f27a018d85ad53390933628975883
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14239
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Multiprocess is only supported by a few libraries (e.g. NVMe driver).
Other libraries that don't support it will often fail on mempool
initialization when running as a secondary process, as the mempools are
already created by the primary process. But the error messages are
vague and don't indicate why this happened. So, this patch adds a check
to see if a mempool exists after spdk_mempool_create() fails and prints
an error message informing users that multiprocess is unsupported.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I6f915a94266e64dda380e3b269424cc579372a10
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14234
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Memory leak for xnvme_dev_alloc is really a bug.
This has been fixed in its parent patch.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I9f131c0f8e3c8b8234965d9edf5afaf018ab3cfa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14224
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This test is meant to simply verify basic IO and rpc integrity with
regards to different io_mechanisms.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I936d57c6ac539e77761656a1ec2b8ad1013f918f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14119
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Add indication of support for compare, compare & write and abort
in json bdev info dump.
Signed-off-by: Jonas Pfefferle <pepperjo@japf.ch>
Change-Id: Ifc8dc1a1b180f08fcd9e9d58684eab1fd50356ff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14137
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It's observed that `spdk_mem_register` may take some time
to register VM's memory regions, and QEMU will wait the
socket message within 1 second, so here, we increase the
value to 5 seconds which could cover all test cases in CI.
Fix issue #2392, #2600.
Change-Id: Ia95cc9c94d27076a25dc107cff32fae9a3608b1e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14121
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Source authentication file before calling each
tempest test. This fixes problems with
"Connection refused" caused by openstack.keystone
authentication.
Change-Id: I7d4184ec9d52f23d354103a1f45ecfac71bc9b97
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13553
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Fixes #issue 2636.
The existing allocation method (nvmf_rdma_get_optimal_poll_group())
is traversal and unperceived link disconnection. A more fair method
considering the number of real-time connections to allocate a poll
group is implemented.
Signed-off-by: liuqinfei <18138800392@163.com>
Signed-off-by: luo rixin <luorixin@huawei.com>
Change-Id: Ic1e6283e386dbb0dd6655bedebe26aeedb16c333
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14002
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Fix missing free of buffers used in tests.
Signed-off-by: Jonas Pfefferle <pepperjo@japf.ch>
Change-Id: I15a4e1edb8046447e6cd96104421f0e623d8ba09
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14139
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Introduce new tests for compare with metadata. Tests
if compare is successful or miscompare for both interleaved
and separated md. We test the normal io path and the
fall-back provided by the bdev layer.
Signed-off-by: Jonas Pfefferle <pepperjo@japf.ch>
Change-Id: Iaefb6d3201cd9cc800422d494c6ef7494e104afd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14133
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Updated the existing nvme aer test to remove a race condition
where the aer_cb is executed and the g_temperature_done variable
is incremented just before it is reset back to 0, which causes
the test to loop indefinitely. Also changed the reset_ctrlr call
to check for non-zero instead of < 0 to check for failure.
Fixes#2559
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Change-Id: Ib0679917684cdbd4c8038279426c6ec368be5f11
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13467
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This commmit introduces a new bdev type backed up by DAOS DFS.
Design wise this bdev is a file named as the bdev itself in the DAOS POSIX
container that uses daos event queue per io channel.
Having an event queue per io channel is showing the best IO throughput.
The implementation uses the independent pool and container connections per
device's channel for the best IO throughput.
The semantic of usage is the same as any other bdev type.
To build SPDK with daos support, daos-devel package has to be installed.
The current supported DAOS version is v2.X, please see the installatoin and
setup guide here: https://docs.daos.io/v2.0/
$ ./configure --with-daos
To run it, the target machine should have daos_agent up and running, as
well as the pool and POSIX container ready to use, please see the
detailed requirements here: https://docs.daos.io/v2.0/admin/hardware/.
To export bdev over tcp:
$ ./nvmf_tgt &
$ ./scripts/rpc.py nvmf_create_transport -t TCP -u 2097152 -i 2097152
$ ./scripts/rpc.py bdev_daos_create daosdev0 <pool-label> <cont-label>
1048576 4096
$ ./scripts/rpc.py nvmf_create_subsystem nqn.2016-06.io.spdk1:cnode1 -a -s
SPDK00000000000001 -d SPDK_Virtual_Controller_1
$ ./scripts/rpc.py nvmf_subsystem_add_ns nqn.2016-06.io.spdk1:cnode1
daosdev0
$ ./scripts/rpc.py nvmf_subsystem_add_listener nqn.2016-06.io.spdk1:cnode1
-t tcp -a <IP> -s 4420
On the initiator side, make sure that `nvme-tcp` module is loaded then
connect drives, for instance:
$ nvme connect-all -t tcp -a 172.31.91.61 -s 4420
$ nvme list
Signed-off-by: Denis Barakhtanov <denis.barahtanov@croit.io>
Change-Id: I51945465122e0fb96de4326db742169419966806
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12260
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
While we do not support cmp & write with separate md we
do support it with extended LBA format, i.e. interleaved md.
The check was to permissive and we only need to skip the
test if the md is separate.
Signed-off-by: Jonas Pfefferle <pepperjo@japf.ch>
Change-Id: I483a33c762a66036bf88e77e7fc88dcb609d391a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14138
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Compaction allows for writing to 100% of the exposed address space
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I0860730299249e4369fac33fdab5fbd7ff91c1da
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13339
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add writer - tracks and manages band state transitions and write pointer as IO
is issued to it.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I5f878dc15bc1c1ac84835f75fe440672fad541d5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13335
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This ensures that when fields are added, that the
size of the structure will change, ensuring different
versions of the structure can be detected using
sizeof.
Adding -Wno-address-of-packed-member to Makefiles
here, although we should consider disabling this
warning globally in SPDK just like DPDK.
Suppress abidiff errors around spdk_app_opts -
structure size and offsets of all existing members
were unchanged, so there is no ABI breakage here.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2249eddb604d7b44180cadb92ba30edcd946b9bd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14091
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
This ensures that when fields are added, that the
size of the structure will change, ensuring different
versions of the structure can be detected using
sizeof.
Suppress abidiff errors around spdk_bs_opts - structure
size and offsets of all existing members were unchanged,
so there is no ABI breakage here.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2b109e0787446a598eee413d1595a68b4c87f830
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14090
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
This test was originally written to validate
assumptions around the QEMU deallocate implementation.
It's not really very useful anymore, so rather than
continuing to maintain it (including adding
support for interleaved and separate metadata),
let's just remove it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4588cf7bc5f4b339674afc0e09f386784ab874e2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14096
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is a temporary workaround for issue #2644, it enables
putting md-enabled NVMe namespaces in CI while we work
through adding the proper md support in the bdev layer
for compare and write.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I13fea25383b522c20e598147306f6de189b4dfd2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14081
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Avoid putting a new req on the outstanding_reqs
TAILQ until we know it can be initialized
successfully. This avoids adding to the TAILQ
only to remove it just after.
This allow simplifies the outstanding_reqs TAILQ
handling, since reqs are now only inserted and
removed in one place each.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5ccc41c14abd541ffcf2a602246e0671386840c7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13991
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The public interface of lib/accel is now include/spdk/accel.h
Change-Id: Id94f623a494eb1b524b060f4413f633073ea7466
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13916
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This will help keep the mixing of this code with the framework code to a
minimum.
Change-Id: I5937ebd84f32068456cdf2b9e03d3e194c760a87
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13912
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
These are 1:1 - they do not need to be separate objects.
Change-Id: I74ab52863f911d9be59ce98e1525302b5bd40846
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13910
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
The multiple reactors support for vfio-user was enabled recently,
and enable this tests in CI now.
Change-Id: I8e145f62c995f968298040b1c550c421a25a7c9f
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13547
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
Note, this change only sets defaults for the ID/KEY,
more specific use cases like NVMe/TCP may set the ID and KEY on a per connection basis.
Also simplify PSK identity string, that isn't NVMe focused.
NVMe libraries using this will need to construct more complicated
identity strings and pass them to the sock layer.
Example:
rpc.py sock_impl_set_options -i ssl --psk-key 4321DEADBEEF1234
rpc.py sock_impl_set_options -i ssl --psk-identity psk.spdk.io
./build/examples/perf --psk-key 4321DEADBEEF1234 --psk-identity psk.spdk.io
./build/examples/hello_sock --psk-key 4321DEADBEEF1234 --psk-identity psk.spdk.io
Change-Id: I1cb5b0b706bdeafbccbc71f8320bc8e2961cbb55
Signed-off-by: Boris Glimcher <Boris.Glimcher@emc.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13759
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
These sleeps should not be required. The steps before them properly
wait.
Change-Id: Ifc278c582dbf8fd837ca7f1f02873789a4e616d6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13835
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We can use the nvmf_get_stats RPC to directly count the number of
connections on each poll group.
Also, we cannot rely on knowing the exact algorithm that the driver will
use to assign connections to NAPI values. We can only know that the
number of unique NAPI values is AT MOST equal to the number of traffic
classes.
Fixes#2577
Change-Id: I6758fdcda752ff5372b1bc59984257b804ad0ea7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13833
Reviewed-by: wanghailiang <hailiangx.e.wang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Changed vfio-user source branch for installing and testing.
Replaced vfio-user-dbfix branch with vfio-user-irqmask2 due
to the recent issue #2600.
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ide525cdd3496c2a3dbecea4e44e6edff63438859
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13867
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is needed to make sure tests use proper QEMU binary.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I868bf60b5480e6a258fbe067ec77d9af26f3a9c9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13964
Reviewed-by: <sebastian.brzezinka@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
ioccsz is specific for fabrics. spdk_nvme_ctrlr_is_fabrics() returns
true for custom fabrics transport. Hence we can use
spdk_nvme_ctrlr_is_fabrics() safely in nvme_ctrlr_update_nvmf_ioccsz().
Before this change, in the unit tests, ctrlr->trid.trtype was set to
zero at initialization. After this change, for most cases,
spdk_nvme_ctrlr_is_fabrics() should return false for most cases.
SPDK_NVME_TRANSPORT_PCIE did not work. Hence, initialize
ctrlr->trid.trtype by SPDK_NVME_TRANSPORT_CUSTOM_FABRICS instead.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I4bedcab4a9f2876c1c9463ff10ad0966754f1713
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13948
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Get a PD for the device from the PD pool managed by the RDMA provider
when creating a QP, and put the PD when destroying the PD.
By this change, PD is managed completely by the RDMA provider or the hooks.
nvme_rdma_ctrlr::pd was added long time ago but is not referenced
anywhere. Remove nvme_rdma_ctrlr::pd for cleanup and clarification.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: If8dc8ad011eed70149012128bd1b33f1a8b7b90b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13770
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
SPDK NVMe RDMA initiator used the default PD per RDMA device. Default PD
may be changed when all QPs for the RDMA device are destroyed and created
again.
For multipath, the RDMA zero copy feature require the PD per RDMA device
to be persistent when all QPs for the RDMA device are destroyed and
created again.
Maintain such persistent PDs in this patch.
Add two APIs, spdk_rdma_get_pd() and spdk_rdma_put_pd().
In each call of two APIs, synchronize RDMA device list with
rdma_get_devices().
Context may be deleted anytime by rdma-core. To avoid such deletion,
hold the returned array by rdma_get_devices().
RDMA device has PD, context, ref. count, and removed flag. If context
is missing in rdma_get_devices(), set the removed flag to true. Then,
if the ref count becomes zero, free the PD and the RDMA device.
The ref. count of a RDMA device is incremented when spdk_rdma_get_pd()
is called and decremented when spdk_rdma_put_pd() is called.
To simplify synchronization, sort the returned array by
rdma_get_devices().
To avoid resource leakage, add destructor function and free all PDs
and related data at termination.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I093cb4ec2c7d8432642edfbffa270797ccf3e715
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13769
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This is causing too many intermittent failures, let's
disable for now while we continue to debug it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8f1f1824b1aa57fe242a77f5d96c9301a2921824
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14001
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In prep for the next few patches that will it back using a
different implmentation. For review purposes it will be much
easier to remove it first. The new implmentation will be nothing
like what was here before.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I3d14e524751442bfd5f0ade87333d879137b5d05
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13435
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This just verifies a modest setup.sh's output which is of little
relevance. On top of that, depending on the system's state, the
test itself may be flaky so get rid of it.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Icc918a0dbbb54067c281aa465a097c4e40a32e11
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13827
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In some occasions the total number of available hugepages increases
by the account of reserved and/or surplus hugepages allocated by the
kernel. This affects the test where it ends up with bigger number of
hugepages then actually requested via setup.sh.
Hugepages overcommitting is disabled under CI nodes, however, this
issue spontaneously appears regardless. To rectify, add the extra
hugepages while checking the expected number + some debug to see the
state of meminfo in case the test still fails.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: If30a422240045ac188a9175eeab7210351eb34a6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13826
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
By the default value, timeout might be too long to detect connection
failure by the end of the test. 512 milliseconds is too small to use
in production but is not so small for this case.
Fixes#2595
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I9f1248b2812eb7625aa943878b022f0a151d4cbb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13908
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It's not needed. $bdevperf_pid is expanded when the trap is signalled,
hence it will always hold PID of the last value it got assigned to.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I89083667e0be5f3f0b0fd1745bfbfb38cb340c42
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13922
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The contents of this file is not evaluated in any way, the test only
reads it back to stdout at different stages. Instead, just keep
bdevperf writing to std{out,err}.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ibd0caa101e895661224f8a969395eb018ece19dc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13921
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I23b206b026dec0cb9e91226aa2ee2de91eebde6e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13904
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I0a9cd41f754f2d52a8caa936a7a7504b0091790d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13903
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There may be for_each operations outstanding on an
io_device when it is unregistered. Currently we just
return when this happens, not unregistering the
device but also not notifying the caller that this
happened (since it returns void, and the callback
function doesn't have a status parameter either).
We could just push this responsibility to the caller,
to never unregister an io_device if it knows it has
outstanding for_each calls waiting to complete. But
I think we can simplify this a lot by just handling
this inside of the thread library. Mark that the
device is pending registration, and unregister it
(on the original requesting thread!) when the
for_each count gets back to zero. Also don't
allow any new for_each operations either.
Note this requires a bit of refactoring on the
thread unit tests, since it is now possible to
unregister a device with outstanding for_each
operations.
Fixes issue #2631.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I978f2d99a25e65d2b7d71ce9b1926a79a6c94263
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13890
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This would allow for better control through the environment which
could be used by the CI.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Iaf94c82ccd7ce6851abb1ad4b7ebf76d686e3608
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13898
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Here "-m " is not used or related.
so remove it.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Ic8700bd0a262bb70b6116bbee86330eece5c03b0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13879
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This follows e380263ba1 - all CI nodes have been updated to an image
which ships with that particular version of vfio-user QEMU.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I2029f48014868366881790a4e258190e3f83b0d0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13894
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When decoupling a snapshot from its parent, we need to clear its parent.
So we should remove the xattr BLOB_SNAPSHOT. Modifying the xattrs of a blob
only works if its metadata are not in read-only mode.
By default, a snapshot is in read-only mode so this operation fails. When we
later want to delete the snapshot, we will see that it has a parent, so we will
try to remove the snapshot from its parent's clones list. This will cause a
crash.
The fix is to remove the BLOB_SNAPSHOT xattr only after setting the snapshot's
metadata in rw mode.
Signed-off-by: Alex Michon <amichon@kalrayinc.com>
Change-Id: I80efa6dd3dcb38b4c738ce2e97aa2ffc281cefa5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13723
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Older compilers (e.g. 7.5 on ubuntu1804) are having issues under
v1.16 due to:
plugins/intel/intel-nvme.c:666:47: error: initializer element is not constant
static const int LATENCY_STATS_V4_BASE_VAL = (
Makefile:108: recipe for target 'plugins/intel/intel-nvme.o' failed
This was fixed by the following commit which is present in the v2.0
release:
e7309044f3
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I7ebcf1b1fdb44500a21bcf3feceb07a722e8fc30
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13775
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The reconnect timeout test case expects a socket READ error
to trigger the reconnect poller in bdev_nvme module, but
we use the `verify` IO workload to send IO requests which
may cause the client doesn't receive any error, because
it will send WRITE commands first.
Fix issue #2595.
Change-Id: Ibc6b534d157552cdb2b55a03c869e254ec4c462e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13840
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
the sizeof(g_vals) should be the num of array, not the num of bytes. see follow:
CU_ASSERT(spdk_json_parse(g_buf, sizeof(in) - 1, g_vals, sizeof(g_vals), &g_end, flags | SPDK_JSON_PARSE_FLAG_DECODE_IN_PLACE) == num_vals);
Fixes#2623
Signed-off-by: tongkunkun <tongkunkun_yewu@cmss.chinamobile.com>
Change-Id: I3b7994606284fe3464650337ecb0f723a627f7aa
Reported-by: Jim Harris <james.r.harris@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13841
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Parameter `num_queues` for virtio_scsi PCI device means
maximum number of queues, it SHOULD include the `eventq`
and `controlq`, while for `vhost_user` RPC call, it means
the number of IO queues, so here we use it as `max_queues`
in lib/virtio and add the fixed number queues for `vhost_user`
SCSI device.
Also fix `vhost_fuzz` to get `num_queues` earlier than
negotiate the feature bits.
Change-Id: I41b3da5e4b4dc37127befd414226ea6eafcd9ad0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13791
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In prep for upcoming patch that will provide an RPC to override
and automatic assignment of an op code to an engine.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I17d4b962fb376a77f97ce051a513679d0fba698e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12829
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK has no control over how the interrupts work in the network stack.
SPDK can only group connections together based on their NAPI ID. So
remove this check from our tests. It's only going to result in
intermittent CI failures.
Change-Id: If8e6214b7d6c5aa4df99101612b98aa43d45b459
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13832
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
These are only called back-to-back and they're both configuring the
driver.
Change-Id: Icc07df1cf23d67954ac3621647b050d4c8c74e64
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13831
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
scope
Some of these names were hard to tell if they were common utilities or
ADQ test functions. Clarify the names.
Change-Id: If6998c3ea996ad6fef0a87a33c90d665c9accaa8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13830
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Also display the log when error happens.
Change-Id: I09040a2fee2379e7506701c7cb558f0d26a5de65
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13805
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is another preparation to create and use ibv_context and pd.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Signed-off-by: Denis Nagorny <denisn@nvidia.com>
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: Id594fa1ccb2daf535b1aaaef0a397bda2ec98578
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13710
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In case user sets --test-conf="" the pkgdep/git still forces
bpftrace installation under fedora35 and newer. Avoid this to
make sure user has a clear view on what's being installed (and
what not) in respect to defined cmdline arguments.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I8b60fe9044d1ab593b3c1acaf1b40dde22acee2e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13607
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The test uses exisitng SPDK tests workflow for performing
series of tests for vfiouser subsystem on live QEMU instances.
For testing purposes it sends series of gRPC methods calls
that are serviced by the SMA and subsystems and then uses
the regular SPDK RPC interface to verify its effects on the application.
SSH connection to VM is used to verify that changes took place.
Signed-off-by: Milosz Linkiewicz <milosz.linkiewicz@intel.com>
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: I38258c1a3f9ee3e457ef0426cdc6feff2f38d729
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11999
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This workaround is needed to be able to build refspdk under newer gcc
shipped with fedora36.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I1f6f8bbe5f64bd281536ff30761fb7cf4bd046fe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13787
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This workaround is needed to be able to build refspdk under newer gcc
shipped with fedora36.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I5baeaae98db79649bbd96f9fbe5a6dcffdf5cfda
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13786
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This attempts to fix builds under f35 where newer kernel requires
the https://review.spdk.io/gerrit/c/spdk/spdk/+/13404 patch to
be present in both the release and LTS build.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ie2a70ae9cb9ca6d2d495ea2cf5729fcffb60d593
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13646
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
The function `nvme_ctrlr_init_ana_log_page` is exactly
same with `nvme_ctrlr_update_ana_log_page`, so remove it.
Change-Id: I1ad51635f47cf95cfa6de217e3b9144885c3b74e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13652
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The match run against btest.out.match expects to find only single
nvme in the configuration, however, some CI nodes may come with
multiple nvme drives causing this particular test to fail. To
mitigate this, make sure to create config with only a single nvme
bdev.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ifa390269b0e0a040b1aea752735c2692cbabac6b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13762
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is done in order to mitigate the following issue:
https://github.com/spdk/spdk/issues/2596
which has been frequently breaking CI. Since failure occurs while
trying to terminate spdk_tgt, remove it from the equation completely.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I9eb2423079ec0717b9b094ccb372adabac614463
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13802
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
allow DSA device to async offload crc32 calculation in nvmf-TCP
This patch can use DSA to accelerate crc32 computation, making
the io performance of TCP paths using crc32 approach the io
performance of TCP paths that do not use crc32.
Using SLIST to minimize the performance drop. SLIST has less
operation compared to TAILQ.
Thinking about memory thrashing, we should use the same memory as
possible to receive new PDUs. So, insert newly freed PDU in to head
is better.
The performance drop is within 1% compared to the TCP path without
crc32.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: I480eb8db25f0e730cb198ca5ec19dbe3b4d38440
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11708
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Original implementation creates pollers and CQs for all discovered
devices at poll group creation. Device (ibv_context) that has no
references, i.e. has no QPs, may be removed from the system and
ibv_context may be closed by rdma_cm. In this case we will have a CQ
that refers to closed ibv_context and it may crash in ibv_poll_cq.
With this patch pollers are created on demand when we create the first
QP for a device. When there are no more QPs on the poller, we destroy
the poller. This also helps to avoid polling CQs that don't have any
QPs attached.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I46dd2c8b9b2902168dba24e139c904f51bd1b101
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13692
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When a bdev is registered, it is examined by the bdev modules before the
bdev register even is notified.
Examination may be asychronous, e.g. when the bdev module has to perform
I/O on the new bdev.
This causes a race condition where the bdev might be destroyed while
examination is not finished. Then, once all modules have signaled that
examination is done, `bdev_register_finished` makes an invalid access to
the freed bdev pointer.
To fix this, defer the unregistration until the examine is completed by
opening a descriptor on the bdev.
Change-Id: I79a2faa96c1c893fc1cee645fbe31f689b03ea4a
Signed-off-by: Nathan Claudel <nclaudel@kalray.eu>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13630
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
abidiff gets confused if a data structure in a
private header files is changed, if there is also
a public header file with the same name. So avoid
this by forbidding private header files from having
the same name as a public header (i.e. one in
include/spdk or include/spdk_internal).
This was mostly already handled by using names like
nvme_internal.h, but we did have a few conflicts
which were causing our check_so_deps.sh script to
sometimes indicate a version bump was needed when
it really wasn't.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I90895efd22c1594044f3c3f9344bb3a67a754c4b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13728
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This avoids confusion with the public idxd.h
header file which causes problems with abidiff.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7910c93d9d95b99c82f4dfdba845e6804e1b6568
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13729
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When `dif_insert_or_strip` is enabled, NVMf library will do
DIF insert and strip automatically, client isn't aware of
it, when `dif_insert_or_strip` is disabled, we will report
Namespace E2E Protection Capabilities to client, but we
don't process PRACT and PRCHK flags in NVMf library, so
here we don't report the capabilities to client and leave
the use of extended LBA buffer to users.
Change-Id: Ic610dc65fef210a7799c6ab693d89138b99e1193
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12165
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Some of the options in sock_impl_opts could be different for different
sockets (even if they're using the same impl). However, outside of a
few selected options (recv_buf_size, send_buf_size), there was no
interface to change them.
This change will allow users to change impl_opts on a per-socket basis
when creating a socket. Sockets created through accept() inherit
impl_opts from the listening socket.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I7628ae19def25cef6ffa62aa54bd34e446632579
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13661
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Also remove ftl_mngt_get_status() because it won't be necessary now.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I335831cb1c506379e9afeb0bf87f1f873033073d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13668
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Suppress werrors when building nvme-cli as they are
redundant for SPDK in general
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I173eae198db5cfc26cbc6b75aa36b0aad8077a79
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12229
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Those lines are needed no more due to no 21.04 support
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: Ia53b04ce6953fed0fbb19779199382f63801380b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13498
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Disable werrors during QEMU compilation because
it doesn't matter for SPDK in general.
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: I55f68a585c3540192732883f42fae98f269e0022
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13645
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
That is possible to get/set registers from any thread,
during regs processing we are polling admin qpair to
get a completion. At the same time, another thread
can also poll admin qpair and that can lead to
undefined behavior.
This patch fixes an issue when bdev_nvme is configured
with io_timeout. If remote target becomes unresponsive
(e.g. due to link down), IO timeout occurs and bdev_nvme
tries to get csts registers in timeout_cb. At the same
time another thread can process adminq, so we may have
2 simultaneous adminq polls. If admin qpair is disconnecting
at that time (RDMA transport) we may destroy resources
twice from different threads.
We don't see a problem with set_regs function but it
won't be redundant to lock mutex in set_regs as well.
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: I7ec3984d25d0249061005533d13b22315b44ddf2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13687
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This implementation of xNVMe BDEV module supports the char-device / ioctl-over-uring,
along with the "regular" io_uring, libaio, POSIX aio, emulated aio (via threadpools) etc.
Code changes done :
a. Addition of xNVMe submodule to SPDK
b. Modification of RPC scripts to Create / Delete xNVMe BDEVs
c. Implementation of xNVMe BDEV module
Signed-off-by: Krishna Kanth Reddy <krish.reddy@samsung.com>
Change-Id: If814ca1c784124df429d283015a6570068b44f87
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11161
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fix issue: #2568
Related test case is also updated.
A summary of the handling as following:
--json (json file used) and -f (continue_on_failure is set), the test case will run until end
--json (json file used) and as long as there is 1 Bdev met IO error, the test case will end when error happened
-z (wait_for_tests is set, means by RPC perform_tests) and -f (continue_on_failure is set), the test case will run until ctrl-c is triggered and will not end when run time is over as we could send RPC (perform_tests) several times
-z (wait_for_tests is set, means by RPC perform_tests) and as long as there is 1 Bdev met IO error, the test case will end when error happened
Change-Id: I886fc5cbd836f3bc5db618e7143cd3a556ea5e7b
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13490
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <qun.wan@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Since the command including * was being passed unquoted, the actual
pattern was being expanded on the host side. This became problematic
when multiple nvme drives were installed inside the host, e.g. the
command on the VM side was looking for a specific ctrl which didn't
exist there. Fix that by passing the full command as a literal string.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I3a3d578c735b9a07abb6e0bcefd6db0c343fc27b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13675
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Other parts have changed these since readv and writev
support ext_opts.
And change corresponding unittest.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I79260a7e6110aa46df2016e579f1da5c241c9844
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13620
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This has been spotted while testing fedora36 builds
and fedora35 with the newest >=5.17.x kernels.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: I012e293d2e6be65f9de80109f4e180ccbc1cd668
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12232
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This brings commit targeting fixes for the pu macros usage under
latest freebsd (13.x).
Also, group cherry-picks into cherry_picks() and apply them
together before the build starts.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Id49aa3d6eb065d8bb92f48402304c4f11f3c047f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13544
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Preparation for incoming patches in the series.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I46a9c68b89034793083f536b8d3b20f68ad1482e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13640
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This function processes and completes asynchronous write requests, so it
makes sense to rename it. This is done in preparation for handling
asychronous read requests.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I3f36631dc24a3170204aaaba56f4968be0672fe5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12172
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In the multi-process case, a process may call `spdk_nvme_ctrlr_free_io_qpair` on
a foreign I/O qpair (i.e. one that this process did not create) when that qpairs
process exits unexpectedly.
The variable `qpair->poll_group` isn't multi-process safe, we can't use it
in `spdk_nvme_ctrlr_free_io_qpair` and related transport poll group APIs.
Change-Id: Ic13a6a2c7d760477be5be5a56a45caa2b5518717
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13573
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
It will not find the h2c related reqs in the tailq now.
We can get it from tqpair->reqs directly.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: I25f0900e875b054d7617450477e9719e7a59aa18
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12861
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This follows similar logic in the pcie and tcp
completion paths, including omitting error
messages when aborting aers by adding a print_on_error
parameter to the completion function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id558d0af2cdd705dfb60abb842bd567a0949ccce
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13525
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
By default, the SPDK nvmf target reports vid==INTEL,
which results in the SPDK nvme driver trying to enable
Intel vendor-specific log page. Fix this by trying to
enable those log pages only for PCIE transport
controllers.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I78ebf365d4fa6295d1f610697266c3ead765988d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13524
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
We can only get to this code path if the controller
has vid==INTEL, so make that more clear by changing
the check to an assert.
Remove unit test that calls
nvme_ctrlr_construct_intel_support_log_page_list()
for a controller that is not VID==INTEL - this is
no longer valid.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3b58451bc95992bf641e7452f0ac4c2bac9fe31c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13523
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
This follows similar logic in the pcie completion
path, including omitting error messages when aborting
aers by adding a print_on_error parameter to the
completion function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I96df72280bb8fcbee3847fdc27f38e14a1bf3251
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13522
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
The test tool doesn't shutdown controllers when exiting the
process, so here we shutdown the controllers, also fix the
exceptions when no active Namespaces in controller.
Change-Id: I21cbdb1e7bdf37a06f66b917a2bb9bd94e06b444
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13495
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
nvme_qpair_abort_all_queued_reqs() aborts error injections, queued
requests, aborting queued requests, and outstanding requests. (Aborting
outstanding requests depends on transports.) However, it did not abort
queued aborts.
Include nvme_ctrlr_abort_queued_aborts() into
nvme_qpair_abort_all_queued_reqs() to do really the name of the
function indicates.
nvme_ctrlr_abort_queued_aborts() has been called in a few cases, but
we do not care duplication.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I19102cc6603a72ce5c398a7947cb4d606b692991
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12849
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Vasuki Manikarnike <vasuki.manikarnike@hpe.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Since we ended support for soft-roce, openstack
tests, have been failing. The cause is lack of
RDMA capable NICs in the setup. We do not need
to change the physical setup to add new NICs,
so we are changing the transport type to TCP.
Change-Id: I9dce0a4f1dc6dc51e22ba61a8c8a23f4178fde84
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13447
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fix issue: #2561
The issue here is that in the bdev_set_qd_sampling_period RPC
command, the QD sampling period has been set. Then later the
related Desc is closed and in the bdev_close() function the
QD sampling period is reset to 0.
A new QD desc is added as the QD sampling period update could
be handled properly.
Meanwhile, a new QD Poll In Progress flag is also added so as
to indicate there are ongoing events of QD sampling and the
Bdev unregister will be handled in the proper way.
Related test case and unit test also updated for this change.
Change-Id: Iac86c2c6447fe338c7480cf468897fc8f41f8741
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13016
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
It launches the bdev_svc app, creates an lvstore,
then grows it twice. In the first grow, the lvstore has
no logical volume. In the second grow, the lvstore has
a logical volume.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: I21a7d3f1d2e6a6fe72e42f89023a8588391d2aba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12320
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The bdev_lvol_grow_lvstore will grow the lvstore size if the undering
bdev size is increased. It invokes spdk_bs_grow internally. The
spdk_bs_grow will extend the used_clusters bitmap. If there is no
enough space resereved for the used_clusters bitmap, the api will
fail. The reserved space was calculated according to the num_md_pages
at blobstore creating time.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: If6e8c0794dbe4eaa7042acf5031de58138ce7bca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9730
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reserve space for used_cluster bitmap. The reserved space is calculated
according to the num_md_pages. The reserved space would be used when
the blobstore is extended in the future.
Add the num_md_pages_per_cluster_ratio parameter to the
bdev_lvol_create_lvstore API. Then calculate the num_md_pages
according to the num_md_pages_per_cluster_ratio and bdev total size, then
pass the num_md_pages to the blobstore.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: I61a28a3c931227e0fd3e1ef6b145fc18a3657751
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9517
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add bpftrace and bcc installation from source for
Fedora35 and higher due to issues with the multipath
test and bpftrace/bcc installed from OS repository.
Fixes#2519
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: Ieedd544a8ac02d9071f0b76f6ddd7007f18f4570
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12920
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Remove QAT patches as they are no longer needed
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: Ibfbe2087aac9431b0b7c8e2addeef555e407bf40
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12994
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Update QAT driver to latest version to enable building
the driver on gcc 12 / Fedora 36. Yasm is needed for
build process.
Change-Id: Ib133f22d0ee2bea5a82b6e7b0bfe408fa1523ce1
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12231
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Update libvfio-user such that the SGL access APIs can be used
concurrently. We are guaranteed that the guest memory remains mappable
now that the vfio-user transport has implemented quiescence.
This is currently only really useful (for a single controller) in poll
mode, but shouldn't break interrupt mode, as we still ensure all a
controller's queues are on the same poll group in that case.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I0988e731558e9bf63992026afc53abc66ec2a706
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12349
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
In SPDK, declarations have the return type on the same line. Definitions
have the return type on a separate line. Astyle has an option for
enforcing this. Unfortunately, it seems to have two bugs:
1) It doesn't work correctly at all on C++ files.
2) It often fails on functions that return enums, or long type names
Deal with 1) by adjusting the check_format.sh script to only tell astyle
to fix return type line breaks for C files and not C++. Deal with 2) by
adding a few typedefs to work around the problem.
Change-Id: Idf28281466cab8411ce252d5f02ab384166790c6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13437
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
AEN single and multi testing are causing failures in the CI env
and have not been root caused. Disabling their tests from the
nvme.sh script for now until root-cause of issue #2559 is found
and fixed.
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Change-Id: I6471d1f4b1d435356cd6b2f8db1f87a26bb9b162
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13469
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
gcc 12 reports that strnlen() exceeds the bound set by maxlen argument.
This patch changes to strlen() to silence the following error:
lvol_ut.c: In function ‘lvs_load’:
lvol_ut.c:1086:56: error: ‘strnlen’ specified bound 64 exceeds source size 4 [-Werror=stringop-overread]
1086 | spdk_blob_set_xattr(super_blob, "name", "lvs", strnlen("lvs", SPDK_LVS_NAME_MAX) + 1);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I56caf5bbb06fa0ea2cc61a9eef145fc275a416b2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13413
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
gcc 12 assumes that nsid might take value of UINT32_MAX,
which when represented as a string does not fit in ns_dev.
This is fixed by accomodating the UINT32_MAX string representation
and the 'n' character.
Following error was shown before this patch:
cuse.c: In function ‘verify_devices’:
cuse.c:133:42: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
133 | snprintf(ns_dev, sizeof(ns_dev), "%sn%" PRIu32, ctrlr_dev, nsid);
| ^~~~~~
In file included from /home/tzawadzk/spdk/include/spdk/stdinc.h:23,
from /home/tzawadzk/spdk/test/spdk_cunit.h:9,
from cuse.c:7:
/usr/include/inttypes.h:104:27: note: format string is defined here
104 | # define PRIu32 "u"
| ^
cuse.c:133:9: note: ‘snprintf’ output between 3 and 267 bytes into a destination of size 266
133 | snprintf(ns_dev, sizeof(ns_dev), "%sn%" PRIu32, ctrlr_dev, nsid);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I14e058edc780d33abdd5eb6ce5ab47ac5d18f10a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13412
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
verify.state files are not very useful because
we fail the tests at any first failure.
If there was something wrong with IO verification
then autotest.sh would fail.
Fio files with metrics output (IOPS, BW, latency, etc)
are also not very useful as per-patch tests are not
focused on benchmarking.
Fixes#2546
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: I33fbe2fb0749d840f08ffe0d606d206268140991
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13019
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Adding more unit tests using standard openssl
The unfortunate small sleep is needed due to issue:
https://www.mail-archive.com/openssl-users@openssl.org/msg02937.html
Change-Id: I6f55453f12371bec6a402ba4c1d20e21aed73cf4
Signed-off-by: Boris Glimcher <Boris.Glimcher@emc.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12625
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
This new test uses new ssl socket implementation
to create and test NVMe/TCP with TLS.
Signed-off-by: Boris Glimcher <Boris.Glimcher@emc.com>
Change-Id: I8c8f81fbc20d5811ecbc94d849a364e4f3f3945c
Signed-off-by: Boris Glimcher <Boris.Glimcher@emc.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12379
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It's useful to add these APIs.
spdk_copy_iovs_to_buf and spdk_copy_buf_to_iovs.
It prepares that other ones can call these.
We don't need to define them in static state
repeatedly.
And add corresponding unit tests.
Change-Id: Ife40fec8d047a48af67b04e6c055e4932282abfb
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12075
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Ignore spdk_nvme_cdata_nvmf_specific ABI changes, only reserved fields
were changed. So this does not constitute an ABI/API breakage.
Signed-off-by: Ankit Kumar <ankit.kumar@samsung.com>
Change-Id: I25c4c7576dc393a925d5b8c1a77b194ec7a60ce4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12868
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Add missing fields from identify controller data structure, for
admin command set attributes.
Update the identify examples file accordingly.
Ignore spdk_nvme_cdata_oacs ABI changes, only reserved fields were
changed. So this does not constitute an ABI/API breakage.
Signed-off-by: Ankit Kumar <ankit.kumar@samsung.com>
Change-Id: I718e3647835a0706a33e7aa6bae774e133071f9b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12866
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Add missing fields from identify controller data structure, for
controller capabilities and features
Update the identify examples file accordingly.
Ignore spdk_nvme_ctrlr_data ABI changes. Reserved fields
were changed, so this does not constitute an ABI/API breakage.
Signed-off-by: Ankit Kumar <ankit.kumar@samsung.com>
Change-Id: I12e622324bc1b0ebef95b854098bce133617051e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12865
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
All other tests wait for scheduling to occur before verifying
the results. Even for 100% busy threads, they are first
round robined between cores.
In some edge cases, if threads are created right at the
end of the scheduling period - they will be 100% busy.
Yet due to low busy_tsc it will be deemed that two of such threads
can be placed on single core. To prevent that a few
full scheduling periods have to be observed.
Thus added sleep for 10 scheduling periods before verifying
the results, similar to other test cases in this file.
While here increased the sleep time between samples to
match the scheduling period. With 1 sec default scheduling period,
no change would occur between two 0.5 sec samples.
Fixes#2140
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5abf3bc04c6f65f4faae2bcd3e6828be72f97311
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9387
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
The aer test print statements were overly complicated for multi
process mode, so a macro was created to simplify them. The macro
will prepend "[Child]" to the child process print statements to
make it easier to see which process is doing the printouts.
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Change-Id: I0ecc5e2526b156fa7f98d44c745408ba922ebeff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12881
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Modified the existing nvme aer test to include a multi-process
option that verifies that two processes will receive an async
event notification. Also added the multi-process aer test to
the CI test suite.
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Change-Id: I08731fad317d43dcfb1766d22a3f4c6aa1738d2a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12293
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Calculation of the ANA log page size should use the
identify ctrl MNAN field
(maximum number of allowed namespaces)
not the NN (maximum valid nsid value).
An ANA-enabled controller must have a non-zero MNAN value,
see NVMe Base Specification, Figure 251,
therefore nvme_ctrlr_init_ana_log_page() may safely use MNAN.
Since NN might be much higher than MNAN,
ANA log size based on NN may results in a very large
log page and cause a failure to get ANA log,
e.g. if it is larger than the controller's MDTS.
Fix: replace cdata->nn with cdata->mnan
in nvme_ctrlr_init_ana_log_page()
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Change-Id: I2a522dca833a27dddad25848d7688efa23d23091
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13039
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Transport layer creation is covered by basically any
test in test/nvmf. Similarly "nvme discover" and
subsystem deletion performed later in the script are
also already covered by other test scripts.
Let's remove this script and save about 10 seconds
of run time.
Change-Id: Id37d217972246b6cb1dfaaaf0443016931809dbc
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12921
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michallinuxstuff@gmail.com>
We usually to constitute an (uin32_t) with 4 (uint8_t)s.
or an (uin16_t) with 2 (uint8_t)s.
If you not to force type change, there may be overflow.
Then you would get the wrong value.
Meanwhile elimating the warning catched my the analyzer.
Fixes issue #2549.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I343a508b52c92475a37e3518022680aede806cb1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13005
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jun Wen <junx.wen@intel.com>
Install sshpass package from third party repo
as it is missing from official epel main x86_64
repository for Centos8.
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: Ide1899393eabb838bcb686c30dc58e4538f10c12
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12685
Reviewed-by: Michal Berger <michallinuxstuff@gmail.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: <qun.wan@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
DPDK CFLAGS get put into CFLAGS in mk/cc.flags.mk,
which for system package installed DPDK will include
extra paths like /usr/include/<arch-3-tuple>/dpdk.
If a Makefile adds its own CFLAGS before including
the .mk fragment that pulls in these CFLAGS, we won't
actually get those cc.flags.mk applied since they
are defined with ?=.
This may need to be revisited - using ?= for these
has evolved through several iterations of our SPDK
configured flag files - starting with commit
08ec96eb. But for now, let's just fix these few
Makefiles.
Fixes issue #2548.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9863db1b37b31907b4088f58cc13b81ed1bb8632
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12982
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
There are a few places we can replace existing license
text with SPDX license identifiers, that did not match
the auto-replacement script in the previous patch.
Make those replacements manually in this patch instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I258720c03bc2153d1c56a8adf6357f224b911c0b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12913
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Many open source projects have moved to using SPDX identifiers
to specify license information, reducing the amount of
boilerplate code in every source file. This patch replaces
the bulk of SPDK .c, .cpp and Makefiles with the BSD-3-Clause
identifier.
Almost all of these files share the exact same license text,
and this patch only modifies the files that contain the
most common license text. There can be slight variations
because the third clause contains company names - most say
"Intel Corporation", but there are instances for Nvidia,
Samsung, Eideticom and even "the copyright holder".
Used a bash script to automate replacement of the license text
with SPDX identifier which is checked into scripts/spdx.sh.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaa88ab5e92ea471691dc298cfe41ebfb5d169780
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12904
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: <qun.wan@intel.com>
Only reserved fields were changed, so this does not
constitute an ABI/API breakage.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I130b9060d3de87377e66fa18b904a49fd1cf920d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12931
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Increase this -P(num-qpairs) value a bit to make the test run more stable.
Fixes#2539
Change-Id: If38281ab490a53387fd97d7a63d0413d5bd4c191
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12859
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
There are a few places where a typo, extra character
or newline was added to the BSD 3-clause license text
which made it differ very slightly from the rest of
the license headers in the source tree. Remove those
differences in this patch, to help with automation of
SPDX identifier replacement in the next patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I542dc53cd252b1699253fd6dcc3ccac9643d7878
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12905
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In autorun.sh it executes autotest.sh as root. But in autotest.sh and
test/unit/unittest.sh, when run git clean -f'*.gcda', it may show errors like:
08:03:54 -- unit/unittest.sh@277 -- # cd /home/jenkins/spdk_repo/spdk
08:03:54 -- unit/unittest.sh@277 -- # git clean -f '*.gcda'
fatal: unsafe repository ('/home/jenkins/spdk_repo/spdk' is owned by someone else)
The reason is the spdk source folder owner may not be root but we run the git
clean command as root. Fix it by using the folder owner's id to do
the git clean operation.
Signed-off-by: Rui Chang <rui.chang@arm.com>
Change-Id: Ifbd3098d4c32ffef5dcca738625302f63572e0c6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12693
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
hw_hotplug job would most of the time throw errors on one of device
removals, while running with vfio-pci driver. This issue was not
present for uio_pci_generic driver.
The hw_hotplug.sh script would detect "Starting I/O..."
log, before "Initializing NVMe Controllers" in function
register_controllers() was printed. This indicates
that the log.txt contained logs from previous hw_hotplug
test.
Change-Id: Iad56511ba689cd6b2a794aee6b952c7bba0fe8ef
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12677
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This SGL type was missed in the original commit
that added the pretty printing.
Fixes: 4d9ab1e9a1 ("nvme: pretty print dptr")
Reported-by: Ramanjaneya Burugula <burugula@gmail.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibc655db4e65009071f39f55f691c94a094cea0bc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12705
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
We apply ADQ on target, then run perf, so that we can verify
SPDK implementation interacting with ADQ.
Although the functional test cases here are relatively simplified,
and in the CI, we have to add -debug compilation option,
so the perf performance with ADQ may not be ideal. We will give
another performance test reference cases of ADQ later.
Change-Id: I5341a7fcd61334ef78084302a4ae70f8ec9b9e46
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7476
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Note that without ISAL or IAA a call to compress/decompress
will fail.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Id20a08f6e61b9a51fa4a1634a5314e6ca18fa504
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12310
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds virtio_blk abstraction for custom transports,
with the 'vhost_user_blk' first one being used.
Added spdk_virtio_blk_transport_ops describing the nessecary
callbacks to be implemented by each transport.
Please use SPDK_VIRTIO_BLK_TRANSPORT_REGISTER to register the transport.
Transports can use virtio_blk_process_request() to process the
incoming I/O from their queues.
virtio_blk_create_transport RPC was added to create one of the
registered transports, possibly with custom JSON arguments.
Added 'transport' argument to vhost_create_blk_controller RPC,
to specify which transport should create the controller.
By default the vhost_user_blk transport is used.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ic9d93a6e0f483796eb56b7174a678e41a6ea4808
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9540
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These were deprecated in 2019, it's time to remove
support for them now.
Change-Id: I9e203a52877802127df8144e68090d7975f9d200
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12772
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
IDXD has always been used everywhere but technically it stands for
the driver, not the HW (Intel Data Streaming Accelerator Driver)
where the X comes from "Streaming Accelerator" somehow. Anyway, the
underlying hardware is just DSA. It doesn't matter much now but
upcoming patches will add support for a new HW accelerator called
the Intel In-Memory Analytics Accelerator which we'll call IAA and
it will use the same (mostly) device driver (IDXD) as DSA. So, calling
the HW what it is will lessen confusion when adding IAA support.
This patch just does renaming for the accel_fw module and associated
files (RPC, etc).
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ib3b1f982cc60359ecfea5dbcbeeb33e4d69aee6a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11984
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
As of right now the UT always used the empty struture of
struct spdk_vhost_dev_backend during the test. This meant
VHOST_BACKEND_BLK.
alloc_vdev() will require further changes to test both types
of backends. So for now change it to VHOST_BACKEND_SCSI,
since it currently does not touch any fields outside of the
struct spdk_vhost_dev.
Meanwhile next patch will do so for blk backend.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib5af7520bc8a21a7af03b810d4cc42726797a331
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12749
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Vhost library was not initialized as part of the test,
it will become necessary later in the series.
Suite startup/cleanup have no matching CUnit test case,
so only assert() can be used. Rather than CU_ASSERT().
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ieaa3d2f6b6f1899105362181f285f585ff9724d7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10945
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If compress driver doesn't support SGL input of output
then we need to copy user's buffers into reduce internal
buffers
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I0c07243a5b668d0e0adcc153e5b573f59c26ab64
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12281
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reduce library allocates one big chunk of memory and
then splits it between requests. The problem is that
a chunk of memory assigned to a request may cross huge
page boundary and if compress driver doesn't support
SGL input of output, operation will be failed.
To avoid this problem, align buffer start on 2MiB
and check each chunk of memory if it crosses huge page
boundary.
Fixes issue #2454
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ie730b8ba928f27a43bde1222b6c18d29b797575a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12249
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
ext_io_opts uses the size member to allow backwards
compatibility however currently we only check if it is
below or equal the current size of the opts struct and
that it is not 0. size is only used when we copy opts
because of split or push/pull.
This patch introduces size checks to allow safe access
to e.g. metadata and memory domain pointers of the user
provided opts pointer. The minimum size of the struct
passed is now the size of the initial version of
spdk_bdev_ext_io_opts. To not introduce additional
checks when opts are consumed by a bdev module we
now always copy if the size is smaller than the
current opts struct size.
When introducing new members to opts additional
checks might be needed if those are directly accessed
through the passed pointer or bdev_io->internal.ext_opts.
Change-Id: Ibd181a5840a3d5022018a9f61403df961ffd6e1d
Signed-off-by: Jonas Pfefferle <pepperjo@japf.ch>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12550
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Separate out SCSI and BLK vhost subsystems to later add
virtio_blk transport abstraction.
This allows for further changes to the vhost_blk, not
affecting vhost_scsi.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id1ecfeafeb936809a479a43c321e13f75cb3d5ad
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9539
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
During ctrlr reconnection, spdk_nvme_ctrlr_reconnect_poll_async()
is executed by a non-timed poller.
We should poll adminq more often during ctrlr disconnection too.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ib1f5b41015aed20deda8df6f2c837981ac233c04
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12615
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
As described in the NVMe specification, a controller level reset
includes the following actions:
- the controller stops processing any outstanding admin or I/O
commands;
- all I/O SQs and CQs are deleted.
In a full controller reset sequence for a PCIe controller, if we do
a controller level reset first, we can abort outstanding commands
after the hardware has actually been stopped.
For NVMe-oF controller, each I/O qpair is an independent network
connection and is disconnected safely. We do not want to change
NVMe-oF controller.
Fixes the issue #2360
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: If05febac74705bfd3df5abd15064c1203126e027
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12447
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The test uses `scripts/sma-client.py` to send a series of gRPC methods
that are serviced by the SMA then verify that new vhost device are
available on qemu guest os.
Change-Id: Ic4a1d56da59a636556fd6dfd4787fc613a4eb325
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12412
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Since SMA keeps track of attached volumes and a volume might get
disconnected at any time (in which case they're also removed from the
host side), a mechanism is needed to monitor if any of the volumes are
no longer accessible.
This patch implements that mechanism by adding a new thread running in
the background that will periodically (60s by default) send a
bdev_get_bdevs RPC and check that all previously attached volumes are
available. If any of them are not, it'll remove it and stop the
associated discovery services (if their refcount goes down to zero).
The period can be changed through the `volume_cleanup_period` variable
in the config file.
One important thing to note is that we assume that any intermittent
connection issues are handled internally by the SPDK application and a
bdev is only removed after all reconnection attempts are performed.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I5b9e63698879527d9f79156a0eda1c8bc5e66def
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12699
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The test checks that it's possible to attach remote volumes through
discovery service. The tests starts up three SPDK instances: one is being
managed by SMA, while the other two are acting as remote storage nodes.
The test verifies that volumes can be successfully discvered and
attached to a device and that the connections to the discovery
subsystems are refcounted correctly.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I3488b822880b99ef9cfd70e03de3ed9054c13901
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12414
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Most of the devices need to send RPCs during initialization (e.g. create
a transport), so we need to take care that they're initialized only
after we are certain that the SPDK process is listening.
The mechanisim is similar to the `waitforlisten` function used in our
test scripts - it sends a series of `rpc_get_methods` calls and times
out after a period of time if no response is received. For now, the
timeout is hardcoded to 60s.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Iddadc04ad4c486d2894bc40e1a899a9d204400fc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11802
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The test verifies that it's possible to register device managers from
out-of-tree plugins. The test defines two plugins, each defining two
device managers implementing the same two protocols and verifies that
it's possible to register different combinations.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I2144b40db603fea95bf8b571777e6662b4de9bc7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11729
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The test uses `scripts/sma-client.py` to send a series of gRPC methods
that are serviced by the SMA and then uses the regular SPDK RPC
interface to verify its effects on the application.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I2b61c61cb475ec906bb6a594cda3082c0bd8ab44
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11728
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
These were deprecated in 2019, it's time to remove
support for them now.
Change-Id: Ic80ce74344b24814dad792cfff6a4791d0430527
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12741
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
With high number of NVMe drives being attached to
SPDK it might take some time to fully initialize all
controllers. Wait a bit longer before trying to
initialize performance tests.
Change-Id: I5104f962e667ee39db6054750afa0fe7bcb6f26a
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11424
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
.driver_specific.nvme is an array, so return all elements
of this array before trying to access .pci_address field.
We only expect a single PCIe address in this test, so it's
safe.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I0697ab2ffb1adff2c6f288bba460858bf594b219
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11406
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
As described in the previous patches, we need to delete all I/O
SQ/CQs before aborting trackers when disconnecting a controller.
The following patches reorder the operations. This patch changes
adminq disconnection to initiate a Controller Level Reset and
adminq completion processes it if ctrlr->is_disconnecting is true.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I64f06bae2ce8a9127124029fd042db0028198e3c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12560
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
When a new cluster is added to a thin provisioned blob,
md_page is allocated to update extents in base dev
This memory allocation reduces perfromance, it can
take 250usec - 1 msec on ARM platform.
Since we may have only 1 outstainding cluster
allocation per io_channel, we can preallcoate md_page
on each channel and remove dynamic memory allocation.
With this change blob_write_extent_page() expects
that md_page is given by the caller. Sicne this function
is also used during snapshot deletion, this patch also
updates this process. Now we allocate a single page
and reuse it for each extent in the snapshot.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I815a4c8c69bd38d8eff4f45c088e5d05215b9e57
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12129
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
To fix issue: #2484
When unregistering the bdev, will send out the message
to each thread to abort all the IOs including IOs from
nomem_io queue, need_buf_small queue and need_buf_large queue.
The new SPDK_BDEV_STATUS_UNREGISTERING state is newly
added to indicate this unregister operation.
In this case, the bdev unregister operation becomes the
async operation as each thread will be sent the message
to abort the IOs and as the last step, it will unregister
the required bdev and associted io device.
On the other hand, the queued_resets will be handled
separately and not aborted in the bdev unregister.
New unit test cases are also added:
enomem_multi_bdev_unregister: to abort the IO from
nomem_io queue during the unregister operation
bdev_open_ext_unregister: to handle the events and
async operations from the unregister operation
Change-Id: Ib1663c0f71ffe87144869cb3a684e18eb956046b
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12573
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
It's now possible to specify a time to wait until a connection to the
discovery controller and the NVM controllers it exposes is made.
Whenever that time is exceeded, a callback is immediately executed.
However, depending on the stage of the discovery process, we might need
to wait a while before actually stopping it (e.g. because a controller
attach is in progress). That means that a discovery service might be
visible for a while after it timed out.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I2d01837b581e0fa24c8e777730d88d990c94b1d8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12684
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
By default, failback to the preferred I/O path is done automatically
if it is restored. Some users may want to keep using the backup I/O
path even if the preferred I/O path is restored. In this case,
bdev_nvme_set_preferred_path can be used to do manual failback.
We may be able to clear/fill I/O path cache more strictly but it will
be complicated and have bugs. This patch does the minimal change,
just skips an apparent case.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I78fe5faee6ff04e88ae3d7c6be6da1c20637c912
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12431
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Check that we're not already connected to a discovery service that has
the same address (or has a referall to) as the service we're trying to
start.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I84863fd959f62b30e9a348f69d10c7f1edffda7a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12627
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Otherwise, we'll try to use the same name to create the bdevs.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I38cfb9073f343a7bf3966754008065c7ab89e609
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12626
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Add a CLI param "-x" to specify which memory
domain operation must be executed during test
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I0dbee8d5d186da1e177e24beadc4e71909e4057f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12344
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The new blobstore ext API is used when the user
provides ext_io_opts in bdev layer.
To store blobstore ext_io_opts, vbdev_lvol reports
non-zero get_ctx_size in bdev module interface.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I64076b5369533be0c1d69ca48aef9d70a9abe488
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11373
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
These function accept optional spdk_blob_ext_io_opts
structure. If this structure is provided by the user
then readv/writev_ext ops of base dev will be used
in data path
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I370dd43f8c56f5752f7a52d0780bcfe3e3ae2d9e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11371
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Introduce spdk_blob_ext_io_opts structure which
is used in the new *_ext functions.
Zeroes dev is updated with implementation of
readv_ext which uses memory domains memzero
or regular memset().
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Id94542196eff999827bf00591fd43804256fccb4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11369
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
This package is needed for testing SSL functionality.
We using both s_client and s_server mode from this package.
openssl-devel is already installed in scripts/pkgdep.
Here we adding the utility itself.
Change-Id: I389f4d273aefd82f2667aba620d00f17c3e557a9
Signed-off-by: Boris Glimcher <Boris.Glimcher@emc.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12645
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Michal Berger <michallinuxstuff@gmail.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
A recent change to the bdevio test changed one of the
tests from a 30x4K IO to a 30xLBA IO.
This has started giving us nightly test failures (see
issue #2499). It is because now the 30 * LBA (512B)
is 15KB which all fits within one 16KiB reduce chunk,
yet we only allocate REDUCE_MAX_IOVS
(17) iovs per reduce IO context. Previously when
they were 4KiB each, we would only need 4 iovecs
(16KiB / 4KiB).
We may need to think through this a bit more, to
make this more dynamic (based on the chunk size
and underlying block size), but for now let's at
least increase this enough to handle the most
common 16KiB chunk / 512B LBA case.
While here, run bdevio as part of per-patch testing,
that would have helped us catch this issue before the
a6e022463 patch got merged.
Fixes#2499.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2140c5b9d038b202edfdcbb2bfee059140f7703a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12672
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reduce the number of iterations by half. Currently this
test often leads to time-outs in CI nightly testing because
of how long it takes.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I3ccf9663706e5f79da609d6b9ffa08bb89dc31dd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12658
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Increase waitforserial() function initial wait time.
When testing with 5.16.X kernel version 2 seconds were
not enough and issuing a "disconnect" immediatelly after
"connect" caused keepalive timeout.
Fixes#2467
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ib913be35b2383daf5f5037e258bbdd2477810921
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12587
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In the following patches, nvme_ctrlr_process_init() will be used to
disable the controller when disconnecting the admin qpair for PCIe
transport. In this case, we will have to exit nvme_ctrlr_process_init()
after CSTS.RDY is 0. However, spdk_nvme_ctrlr_reset() and
spdk_nvme_ctrlr_reconnect_poll_async() have to continue
nvme_ctrlr_process_init() until the controller becomes ready.
To differentiate stop and continue clearly, add a new state
NVME_CTRLR_STATE_DISABLED to enum nvme_ctrlr_state.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ic0a5fb7114d4eeb1cefec28bc404184768fb0a96
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12613
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The stub app runs during NVMe CI testing to minimize test time.
It runs as the primary process and all other NVMe tests
run as secondary processes and connect to the NVMe controller
via shared memory. The issue is when there is an Async Event
Notification, the secondary processes are not informed of the
event because the stub app does not process admin completions
and therefore they do not get added to other processes async
event list. This change adds a call to process admin
completions during the stub_sleep routine to cover this type
of AEN case. A configurable sleep time was also added to
allow the admin completion calls to occur more rapidly to help
minimize test time, if needed.
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Change-Id: I72d5afc511c4409ec4a03cd969dbbc0d7dd4f256
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12555
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Allow DAOS modules to be not built during scanbuild test.
The CI systems which do the autobuild & scanbuild tests are
DAOS development packages necessary to build "--with-daos"
are not available for Fedora systems which are used to run
build tests.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I3e01413a64d55dae2a0d77c3bf5fa9ed23c7ad87
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12408
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Changed 'git -C' to 'git --git-dir' when adding
submodules to cloned spdk repo. Both commands are not
equivalent. 'git -C' does not override the GIT_DIR
environment variable and some systems may have set
the spdk repository location incorrectly (not visible
by OS). Using 'git --git-dir' allows to set repo
options remotely (without being inside).
Changed the ownership of the spdk repo (Linux only)
to the actual $USER while checking if repo exists.
That prevents from unsafe directory detection run
by GIT.
Such issues happend on Ubuntu 18.04 and 20.04
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: I61dceddebde7e3c66e4b37990e205c513fe38414
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12551
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Michal Berger <michallinuxstuff@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
These were deprecated in 2019, it's time to remove
support for them now.
Fix ocf test script that was still using the
deprecated get_bdevs RPC name - change it to
bdev_get_bdevs.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7f8caedc250b80503671a0236694181613f63860
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12553
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
We have separated the process_shm function in order to avoid its call-out in "nvmftestinit" when there are no rdma cards
Signed-off-by: Jaroslaw Chachulski <jaroslawx.chachulski@intel.com>
Change-Id: I42d2d3426b71199a248bbfb238ab3811457c68bd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12394
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We enable multiple engines by:
* getting rid of the globals that point to the one available HW
and one available SW engine
* adding a submit_tasks() entry point for the SW engine so that
it is treated like any other engine allowing us to just call
submit_tasks() to the assigned engine for the opcode instead of
checking what is supported
* changing the definition of engine capabilities from
"HW accelerated" to simply "supported"
* during init, use a global (g_engines_opc) that contains engines
and is indexed by opcode so we know what the best engine is for each
op code
* future patches will add RPC's to override engine priorities or
specifically assign an opcode(s) to an engine.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I9b9f3d5a2e499124aa7ccf71f0da83c8ee3dd9f9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11870
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
The NVMe bdev module supported active-passive policy for multipath mode
first. By this patch, the NVMe bdev module supports active-active policy
for multipath node next. Following the Linux kernel native NVMe multipath,
the NVMe bdev module supports round robin algorithm for active-active
policy.
The multipath policy, active-passive or active-active, is managed per
nvme_bdev. The multipath policy is copied to all corresponding
nvme_bdev_channels.
Different from active-passive, active-active caches even non_optimized
path to provide load balance across multiple paths.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ie18b24db60d3da1ce2f83725b6cd3079f628f95b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12001
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
If we specify a preferred path manually for each NVMe bdev, we will
be able to realize a simple static load balancing and make the failover
more controllable in the multipath mode.
The idea is to move I/O path to the NVMe-oF controller to the head of
the list and then clear the I/O path cache for each NVMe bdev channel.
We can set the I/O path to the I/O path cache directly but it must be
conditional and make the code very complex. Hence, let find_io_path() do
that.
However, a NVMe bdev channel may be acquired after setting the preferred
path. To cover such case, sort the nvme_ns list of the NVMe bdev too.
This feature supports only multipath mode. The NVMe bdev module supports
failover mode too. However, to support the latter, the new RPC needs to
have trid as parameters and the code and the usage will be come very
complex. Add a note for such limitation.
To verify one by one exactly, add unit test.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ia51c74f530d6d7dc1f73d5b65f854967363e76b0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12262
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: <tanl12@chinatelecom.cn>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If the fuzzer crashes or hangs, LLVM spits out a file
containing the raw data input for the iteration that
caused the crash or hang. Add a -N option to
llvm_nvme_fuzz to allow the user to specify one of these
files. When specified, the fuzzer will only run one
iteration with that specific input data.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0d86cca7b2a0b6eaee263665478c31ee4060a8b8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12451
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We do not want the fuzzing thread to compete with
one of the nvmf target cores - otherwise they will
keep preempting each other and drastically reducing
the operation rate.
This sped up the operation rate approximately 20x
in my test VM.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I75d8c59d75e49cafaf7ee94f4796f9184b690647
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12403
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
If an input causes a hang, the fuzzing thread won't
terminate itself, since it is waiting for all
outstanding commands to complete. So raise a SIGSEGV
in the SPDK shutdown handler instead, which will
cause the fuzzer thread to exit as well as generating
an input file of the hung input.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5753977740e27ca7827222b9e3cee1e939ef31a1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12407
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <yifan.bian@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
When the LLVM fuzzer is done, it calls exit(0)
explicitly. This triggers the DPDK exit handler
to run which starts unmapping huge pages while
our reactor thread is still running.
Currently, this doesn't cause any problems since
the fuzzing thread and reactor thread are running
on the same core. But the next patch will
unaffinitize the fuzzing thread, meaning that the
reactor thread will be actively trying to read
hugepage memory while the fuzzing thread is in
DPDK exit handlers unmapping that same memory.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie304ebbb1962855796dac699849a0726cfdcd0d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12406
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Similar to examples/nvme/perf/perf.c
Usage:
-z disable zcopy
-Z enable zcopy
Signed-off-by: Boris Glimcher <Boris.Glimcher@emc.com>
Change-Id: I56f1b0d9c79cbfdba57d0e132a18cb5dce0b7904
Signed-off-by: Boris Glimcher <Boris.Glimcher@emc.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12435
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When we use Fuzzer 0 to do random testing of admin commands,
it's should be a normal one, instead of Fused operation.
Change-Id: I652a725798e79842866be01119be817c965fcee7
Signed-off-by: Yifan Bian <yifan.bian@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12421
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Added a check before any of the parted calls to
confirm the size is what is expected.
Fixes#2388
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: I18720c66d70da82b8943d3231348a4015108a598
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11820
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Michal Berger <michallinuxstuff@gmail.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
blockdev_compare_and_write and blockdev_write_read check
if data_length is multiple of block size and silently
succeed if it is not. There are multiple test that test
e.g. invalid size but the actual bdev API is
never called and tested because of the early return.
The intend of this behavior presumably was to allow
to run test like e.g. the 512bytes rw test on a 4K
formatted namespace without failing. Instead of silently
succeeding which introduces the issues described this
patch changes all sizes to be multiple of block size and
removes the test for valid block size to let the
return value of the bdev API functions indicate failure like
intended. All previous 4k tests are now performing io of
1 block size. Previous 512byte tests now perform
8 * block size (to have 4k test size for 512byte formatted
namespaces). Write zeroes test are now using the
write zeroes buffer size instead of a hardcoded value
and align accordingly to block size io.
Furthermore, no cmp&write test is ever executed because
data_length is set to 1 trying to indicate 1 block but
it is tested against valid block bytes and silently
succeeded. Also write and read helpers in cmp&write test
expect bytes not blocks. For consistency use bytes in the
test and only convert to blocks when calling the cmp&write
blocks API.
Signed-off-by: Jonas Pfefferle <pepperjo@japf.ch>
Change-Id: I662094c2bcd08c0e9dc5573177a2e7a0edd275ce
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12382
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Can only 'return' from a function or sourced script.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ie6104adeec0f07557989d9ba25ca9aa2f563e1d5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12422
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Do not perform strict host checking and mask
known hosts file. The test might run just after
IP address is set up and we don't want to get
stuck at ssh interactive prompt for adding remote
host to known hosts list.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I10e5e473520994e09562e667b27ee655fceb2dd5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12348
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Put the SSH routine into a function and allow to
use custom SSH key by using an optionally set
environment variable.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I6b1f552af9e28ab0b94d027c8848ef0dd5480791
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12339
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Branch "vfio-user-v0.93" has been silently removed.
To fix pkgdep script, branch "vfio-user-dbfix" been
chosen, but the reason behind this decision is
unknown to me.
Signed-off-by: Pawel Piatek <pawelx.piatek@intel.com>
Change-Id: I56dece900efcddfc020e13f2f8ef1019cc2185ec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12358
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
spdk_bdev_get_acwu() is a 1-based number, so we need
to subtract 1 from it before assigning the value to
nsdata->nacwu.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I32708b28a35670cba6013a48b79389fa48226285
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12399
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Fixing grep because in freebsd grep interprets --exclude,include differently
which causes match on run_test()
Fixes: #2479
Signed-off-by: Jaroslaw Chachulski <jaroslawx.chachulski@intel.com>
Change-Id: I3ab5daa7cd49d2bc8f1af6f7517f9b74b2dd88de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12392
Reviewed-by: Michal Berger <michallinuxstuff@gmail.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
The bdevio test app has some test cases verifying
that write zeroes commands are handled correctly,
but using knowledge of the ZERO_BUFFER_SIZE that
the bdev library uses for splitting larger write
zeroes commands. Instead of hardcoding that 1MB
value in bdevio.c, have bdevio.c use ZERO_BUFFER_SIZE
directly instead. But this requires moving
ZERO_BUFFER_SIZE into bdev_internal.h and having
bdevio.c include that file.
We do this instead of putting ZERO_BUFFER_SIZE in
the public API because we don't want users to
make any kind of dependencies on this value.
While here, also rename the tests that are using this
value, so that the test names don't include any reference
to the specific size of this bdev-internal zero buffer
size.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia29d92a706cb1f86b4c29374dc2a9beccf679208
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12383
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Centos7: ndb package version update - version 3.14-2
of the nbd package is no longer available in
epel repository.
Updated for version 3.24-1.
Centos8: repository URL change - old ceph
repository has Centos version mismatch.
Centos8: no need to install NBD package. It is available
on the system by default.
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: Ifae0833822b270127b31fe95c14f6803f688bfc6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12156
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When sending a fused compare and write command, we pass a callback
bdev_nvme_comparev_and_writev_done that we expect to be called twice
before marking the io as completed. In order to detect if a call to
bdev_nvme_comparev_and_writev_done is the first or the second one, we
currently rely on the opcode in cdw0. However, cdw0 may be set to 0,
especially when aborting the command. This may cause use-after-free
issues and this may call the user callbacks twice instead of once.
Use a bit in the nvme_bdev_io instead to keep track of the number of
calls to bdev_nvme_comparev_and_writev_done.
Signed-off-by: Alex Michon <amichon@kalrayinc.com>
Change-Id: I0474329e87648e44b08998d0552b2a9dd5d34ac2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12180
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds an extra spdk_thread_send_msg() call to destroy a qpair
to make sure that it isn't freed from the context of a socket write
callback. Otherwise, spdk_sock_close() won't abort pending requests,
causing their completions to be exected after the qpair is freed.
Fixes#2471
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ia510d5d754baccca1e444afdb10696ab9b58e28b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12332
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There is a race condition when a bdev is unregistered while reset is
submitted from the upper layer very frequently.
spdk_io_device_unregister() may fail because it is called while
spdk_for_each_channel() is processed.
spdk_io_device_unregister io_device bdev_Nvme0n1 (0x7f4be8053aa1)
has 1 for_each calls outstanding
To avoid this failure, defer calling spdk_io_device_unregister() until
reset completes if reset is in progress when unregistration is ready
to do, and then reset completion calls spdk_io_device_unregister()
later.
A bdev cannot be opened if it is already deleting. So we do not need
to hold mutex.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ida1681ba9f3096670ff62274b35bb3e4fd69398a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12222
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Previously, if a namespace is in ANA inaccessible state, I/O had been
queued infinitely. Fix this issue according to the NVMe spec.
Add a temporary poller anatt_timer and a flag ana_transition_timedout for
each nvme_ns.
Start anatt_timer if the nvme_ns enters ANA transition. If anatt_timer
is expired, set ana_transition_timedout to true. Cancel anatt_timer or
clear ana_transition_timedout if the nvme_ns exits ANA transition.
nvme_io_path_become_available() returns false if ana_transition_timedout
is true.
Add unit test case to verify these addition.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ic76933242046b3e8e553de88221b943ad097c91c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12194
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Now controller initialization with RDMA
transport is fully async
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I26e857740d3137d0b0e987facc81fc5f6ef81f2b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10756
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
bdev may not support IO_TYPE_RESET, so spdk_bdev_reset
may fail and we can hit UT assert. Fix - wait for success
or failure of the reset depending on the support of reset
operation
Part of fix for issue #2454
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I6e95b6ed46bafd34cfdcc7c91ec23f974045ea95
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12248
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This reduces a lot of casting.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ibc04f422858642d0e20c9b020bb6c5d1b70256fe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11534
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Similar to commit 9035986e for the nvmf tests, we add
the same FORWARD entry here for iscsi_tgt tests.
Some distros or kernels do not automatically forward
packets across the bridge we set up in
create_veth_interfaces(). So add an iptables entry to
explicitly add a forwarding rule.
This allows me to run the iscsi_tgt tests in my
Ubuntu 22.04 VM.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9e48c10971bdf752e8bd83e5494f4a2a75b06ccd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12161
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The code to handle the lingering qpair when deleting it was really
complicated.
The RDMA transport can connect or disconnect qpair asynchronously.
Then we can include the code to handle the lingering qpair into the
code to disconnect qpair now.
If the disconnected qpair is still busy, defer completion of the
disconnection until qpair becomes idle.
If poll group is not used, we can complete disconnection immediately
because cq is already destroyed.
The related data and unit test cases are not necessary anymore.
So delete them in this patch.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ic8f81143fcad0714ac9b7db862313aa8094eeefb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11778
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add three states, INITIALIZING, EXITING, and EXITED to the rqpair
state.
Add async parameter to nvme_rdma_ctrlr_create_qpair() and set it
to opts->async_mode for I/O qpair and true for admin qpair.
Replace all nvme_rdma_process_event() calls by
nvme_rdma_process_event_start() calls.
nvme_rdma_ctrlr_connect_qpair() sets rqpair->state to INITIALIZING
when starting to process CM events.
nvme_rdma_ctrlr_connect_qpair_poll() calls
nvme_rdma_process_event_poll() with ctrlr->ctrlr_lock if qpair is
not admin qpair.
nvme_rdma_ctrlr_disconnect_qpair() returns if qpair->async is true
or qpair->poll_group is not NULL before polling CM events, or polls
CM events until completion otherwise. Add comments to clarify why
we do like this.
nvme_rdma_poll_group_process_completions() does not process submission
for any qpair which is still connecting.
Change-Id: Ie04c3408785124f2919eaaba7b2bd68f8da452c9
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11442
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
After 7610bc38d, python modules are now located in the python/
directory. That patch also updated PYTHONPATH assignment in most of the
scripts, but one of the perf script and some docs/messages were missed.
Change-Id: Iff3588526f2a382e599f5734d38fc32c15a7bf56
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12223
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
From qemu 6.1 The use of qemu-img create that depends on a backing
file now requires that an explicit backing format be provided.
This is for safety: if QEMU probes a different format than what you
thought, the data presented to the guest will be corrupt.
Fixes: #2466
Signed-off-by: Jaroslaw Chachulski <jaroslawx.chachulski@intel.com>
Change-Id: I56ae7c71097edb387b14c8a042408cd6c50af4ee
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12268
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_vhost_dev structure should only contain generic fields
that are to be used by either vhost, vhost_blk or vhost_scsi
layer.
The vhost_user backend can hold its properties in
spdk_vhost_user_dev, which is maintained within rte_vhost.
Both structures contain references back to each other.
The reference in spdk_vhost_dev is a void pointer to
allow future transports to keep the reference
to their own structures.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I68640c524426d885c20242146365ba242fa9df8e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11813
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
In support of upcoming patches and to greatly simplify things,
the capabilites enum which held bit positions for each opcode
has been removed. Only the opcodes enum remains and thus only
opcodes are used throughout. For the capabiltiies bitmap a helper
function is added to convert from opcode to bit position. Right
now it is used in the IO path but in upcoming patches that goes away
and the conversion is only done at init time.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ic4ad15b9f24ad3675a7bba4831f4e81de9b7bc70
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11949
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Patch for not running tests if ASAN and
Valgrind options are both enabled.
Fixes#2422
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: I50c91bede687f0aee571c1f2540530a7fafcb49c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11998
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Crypto patch for increasing maximum number of crypto
devs applies to all DPDK releases since 21.11.
Change the conditionals so that the patch is applied
to any new DPDK version.
Also change the patch location to "21.11+" directory
to indicate that patch is not exclusive for 21.11
version.
Change-Id: I341f88958c6bf6c4d77909a06bf7ce91200cb70e
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12159
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Michal Berger <michallinuxstuff@gmail.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Previously spdk_vhost_dev_backend held callbacks
for vhost_blk and vhost_scsi functionality, along
with ones that are called by the vhost_user backend.
This patch separates out those callbacks into two
structures:
- spdk_vhost_dev_backend - to be implemented by vhost_blk
and vhost_scsi
- spdk_vhost_user_dev_backend - is only implemented by
vhost_user backend, callbacks for session managment
specific to that transport
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I348090df5dddeb2b1945b082b85aec53d03c781b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11812
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Set the GPIO pin to HIGH during trap command.
This is to avoid errors in other test suites, when
hardware hotplug test returns with an error.
Change-Id: I953d42b8f87196a072c3b4530a38b9bf59c62316
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12155
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
QEMU version 6.2.0 update required due to
an error while configuring the installation.
On Rocky Linux, this prevents image building
by Packer.
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: Ibea66d927513c2716a5c53f62e6a043a081f2f62
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12094
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This test was written before reset was supported on NVMe-oF devices. It
should be working now, so go ahead and test it.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ifce04542c4a6fdef1a33d094a5ea8d504dee6f24
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11595
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
there is no group
The real implementation handles this by returning -ENOENT, so do the
same in the test.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I405b6f60bf4dcdb22c57e48bbaf66d57522a49c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11508
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Count disconnecting a queue pair as activity so that the unit test
poll_threads() calls don't bail out until the disconnectedd_qpair_cb is
called at least once.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Idc437d6c589dbf133bfcbb5edba1087f928a718c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11507
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
This was neither set nor used.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I3119135843c5fc0b8724e593db40df46e6b5bdb0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12097
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
- MLX5 crypto device setup and run in blockdev.sh.
- Using "env_context" FIO config field to run FIO perf tests on MLX5
device.
- Wait a bit longer for tgt to start since MLX5 allocates descriptors
longer than the others.
Signed-off-by: Yuriy Umanets <yumanets@nvidia.com>
Change-Id: I282872cf86528283a3a59e0a787ff516181d534e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11634
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is done to make sure we don't miss more complex setups where
target devices are not mounted but still hold some valid data that
shouldn't be touched in any way.
Also, adjust function names so they clearly indicate what is being
checked.
Signed-off-by: Michal Berger <michallinuxstuff@gmail.com>
Change-Id: Ibb0f1f21de68009a2f8f1faf4595a07ae527da35
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11111
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Up until now, importing an SPDK RPC python module was just a matter of
`import rpc`. It's fine until there's another module called `rpc`
installed on the system, in which case it's impossible to import both of
them. Therefore, to avoid this problem, all of the modules were moved
to a separate directory under the "spdk" namespace.
The decision to move to a location under a separate directory was
motivated by the fact that a directory called scripts/spdk would look
pretty confusing. Moreover, it should make it also easier to package
these scripts as a python package.
Other than moving the packages, all of the imports were updated to
reflect these changes. Files under python now use relative imports,
while those under scripts/ use the "spdk" namespace and have their
PYTHONPATH extended with python directory.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib43dee73921d590a551dd83885e22870e72451cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9692
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This test reproduced issue #2428. It does the following:
1) submit some large writes (requiring R2T or RDMA READ)
2) submit fused compare (first fused)
3) variable number of qpair polls
4) submit fused write (second fused)
The RDMA and TCP transports were not accounting for the
fused bits, and would send a non-fused command down to
the target layer between the two fused commands.
By adding the variable amount of delay between the fused
command submissions, it creates a window where a large
write's payload is fetched from the host and submitted
to the target between submission of the two fused commands.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1abd5a6bca08386279c09f8135387826149d30ef
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11963
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Rename hotplug.sh to sw_hotplug.sh (software hotplug)
and refactor its code in preparation for new software
based hotplug test.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I751fc60ee013de341e064c83f0be3a9b404008e7
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8834
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Adds an option to wait for a bdev to appear
when issuing bdev_get_bdevs in waitforbdev.
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: I2f989a2cc5282049182834b67629f2fa11122105
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12131
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The concat module can combine multiple underlying bdevs to a single
bdev. It is a special raid level. You can add a new bdev to the end of
the concat bdev, then the concat bdev size is increased, and it won't
change the layout of the exist data. This is the major difference
between concat and raid0. If you add a new underling device to raid0,
the whole data layout will be changed. So the concat bdev is extentable.
Change-Id: Ibbeeaf0606ff79b595320c597a5605ab9e4e13c4
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11070
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To execute a callback function for each registered bdev or unclaimed
bdev, add new public APIs, spdk_for_each_bdev() and
spdk_for_each_bdev_leaf().
These functions are safe for race conditions by opening before and
closing after executing the provided callback function.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I59b702ffec7b4fc5e9779de5a3a75d44922b829b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12088
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use spdk_bdev_readv/writev_block_ext even when
there is no ext opts passed by bdev layer
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I0b9f17150cdba1a1023478bae745ab4438ea99bb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10070
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
That is a preparation for support of memory domains
in bdev_raid
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I3a6e01eccd4d7e4bc197dc5ffe268d42081d41de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11429
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
memory domains
If bdev doesn't support any memory domain then allocate
internal bounce buffer, pull data for write operation before
IO submission, push data to memory domain once IO completes
for read operation.
Update test tool, add simple pull/push functions
implementation.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ie9b94463e6a818bcd606fbb898fb0d6e0b5d5027
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10069
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Replace spdk_bdev_get_by_name() + spdk_bdev_unregister() by
spdk_bdev_unregister_by_name() wherever possible.
This simplifies the code and makes the code more reliable.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I91388c9d0b2e244cb745720a480803b03c42a226
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12066
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To unregister a bdev more correctly, we had to call
spdk_bdev_open_ext(), spdk_bdev_desc_get_bdev(), spdk_bdev_unregister(),
and then spdk_bdev_close(). This was correct but complicated.
Hence add a new public API spdk_bdev_unregister_by_name() which does
the whole correct sequence of bdev unregistration.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I9068d4ac49dca944436e0ba587308fd356dfef75
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12065
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The process of matching qpair to poll group is split into
two distinct parts that occur on different threads.
See spdk_nvmf_tgt_new_qpair().
This results in a race condition for TCP between spdk_sock_map_lookup()
and spdk_sock_map_insert(), which are called in spdk_nvmf_get_optimal_poll_group()
and spdk_nvmf_poll_group_add() respectively.
Fixes#2113
This patch picks a hint from nvmf_tcp for next poll group,
which is then passed down to spdk_sock_map_lookup().
When matching placement_id exists, but does not have
a poll group assigned - the hint will be used.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I4abde2bc9c39225c9f5dd7c3654fa2639bb0a27f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10271
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The rdma buffer for stripping DIF metadata is added. CPU strips the DIF
metadata and copies it to the rdma buffer, improving the rdma write
bandwith. The network bandwidth during 4KB random read test is increased
from 79 Gbps to 99 Gbps, the IOPS is increased from 2075K to 2637K.
Fixes issue #2418
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Change-Id: If1c31256f0390f31d396812fa33cd650bf52b336
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11861
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Scripts are modified to create easily recognizable partition
label so that we know autotest.sh can safely remove them.
It is possible to achieve by creating the GPT partition with
'SPDK_TEST' label.
Fixes#2345
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: Ibfcebc5bb68e1b4e1d93e0359a39d3e34748d21d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11821
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Patch is no longer needed and does not apply since
1.7.16 ICE driver version.
Change-Id: Ieaa871347158047cc62f2accba626cb74aba9a67
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12093
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
When iovs are copied from bounce or to bounce, the bounce is usually
alloced from data_buf_pool for better performance, and is multi iovs
instead of a single buffer. Therefore, block-aligned bounce are
supported.
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Change-Id: If56b21d9e46c73d4c956c227bec33ddd0ab9745b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11860
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
spdk_sock_map_insert() allows for allocating a sock_map
entry, without assigning any sock_group.
This is useful for cases where placement_id determined
by the component using spdk_sock_map_*. See PLACEMENT_MARK mode.
Placement_id's are allocated first, then an empty one is found
using spdk_sock_map_find_free().
Since the above is a valid use case, then entry in sock_map
can exist without a group assigned. spdk_sock_map_lookup() has
to handle such cases, rather than trigger an assert.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia717c38fef5e71fe44471ea12f61a5548463f0cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10725
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: wanghailiang <hailiangx.e.wang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The usage of internal API for sock_map was not unit tested,
so far.
This patch adds first set of UT for the sock_map,
expanding it and fixing some issues later in the series.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Idfce8e19668a87f1d45d73310edb17d71d9f8bd8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10724
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add flag "SPDK_TEST_FUZZER" to control building of llvm lib using
CC=clang-$clang_complier
CXX=clang++-$clang_complier
config_params with --with-fuzzer=/usr/lib64/clang/$clangV/lib/linux/libclang_rt.fuzzer_no_main-x86_64.a
Signed-off-by: Jun Wen <junx.wen@intel.com>
Change-Id: Icf3dfe13989d083d22be69b964a54830324a657e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11153
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: <qun.wan@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This only adds it on fedora 34 and up, as we've found the older versions
to have issues. It will make it possible to use it on our fedora CI
systems.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I121e273f07a8426212d48ab4540753b963e6e0f0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11666
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Test for github issue 2371:
No request available for FABRICS/CONNECT when
running bdevperf w/ ultra high queue depth.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: Idb125dd29c0e6ac4e8c2c67cb68e010e128fd947
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11598
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
As we now only support a single WQ, there's no need for a teble of
them and no need to assert that the stride from WQ to WQ is the
same as the WQ struct size.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I205f36aae22070f532653726dd75249bbafbe3ef
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12081
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
First in a series of patches that will enable multiple engines
to exist at once and choose the best one based on their priorities
and capabilites, the public API will no longer be needed.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia87b83aa2263745a94a822a160b6e97bb2e0dc19
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11948
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
With recent changes libreduce should provide correct buffers
if the driver doesn't support SGL in/out. This patch verifies
that we don't use SGLs when they are not supported.
Since even a single buffer can be split on 2MB page
boundary, it is not enough just to check iovs count.
Added asserts that the first elements of mbufs are
not null to avoid scan build errors
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I620e43bf5b1abd25cab412fe08346a6d767c9be9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11973
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
rte_pktmbuf_free frees the given mbuf and any chained mbufs.
It can cause double free of some mbuf if we free every mbuf
in a loop. Instead use rte_pktmbuf_free_bulk which correctly release
chained mbufs.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I55fd7832ff656f519a4ed2f02de8ef1a0f637a02
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11972
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In the compression operation we may have SGL input
if user's buffer is fragmented or less than chunk_size.
If the backing device doesn't support SGL input then
we should copy user's buffers into decomp_buffer
(including paddings if any).
In the decompression operation, if the backing device
doesn't support SGL output, we use a single output buffer
which is pointing to decomp_buffer. Once the operation
completes, we should copy the result into user's buffers.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ic7fddd38374bb6898256633eacd192dbaf36541a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11970
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The driver always creates a single group containing all of the engines
and a single work queue.
Change-Id: I83f170f966abbd141304c49bd75ffe4608f5ad03
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11533
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
It is not used for anything.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I1d967b2d0e404756f7ceda98ddc4ee9017ec83f7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11489
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
It turns out that this can stay on the stack.
Change-Id: I961366307dae5ec7413a86271cd1dfb370b8f9f3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11488
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
These aren't ever accessed in the main I/O path, so we can read them in
whenever we need them and make the code a lot simpler.
Change-Id: Icfdbfe9f2d9db13f4d0d28b2b4103cd0c443bcf4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11485
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This is no longer needed.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I08c788ca0451e739804b568d613c1e52e071c61f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11794
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Fill is sent in as a uint8, we need to populate the full uint64
input with the uint8 pattern or we'll get a miscompare. This is
how idxd was doing it, instead of adding the same code to ioat just
move it up a layer.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia4aab1c6230f35ab88bb8a0e3b8e16dbd93007c7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11947
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
- Fixed duplication of key, key2, drv_name, cipher, etc., fields in
struct bdev_names and struct vbdev_crypto. Moved all of them into
the new struct vbdev_crypto_opts, which is re-used by both structs.
This aslo removes duplication in error handling and fininalization
logic that checks the keys are zeroed out and properly freed.
- Moved unhexlify into vbdev rpc code. All keys passed to vbdev
already in the binary form.
- Provide meaningful error messages in the rpc response on keys
validation issues during setup of crypto vbdev.
- Updated unit tests.
Signed-off-by: Yuriy Umanets <yumanets@nvidia.com>
Change-Id: I1fab8771bbbc0cd2f359f0d105fec28fb86893b3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11631
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
- Added hexlify() and unhexlify() for key and key2. This is required
for keys that contain zero and non-ascii characters. Since binary
keys may contain zero character, strlen(key) cannot be used and
key_size and key2_size are used instead. Non-asci chars are not
allowed in json and using hexlified keys fixes this issue as well.
- Updated documentation to clearly state that hexlified keys must
be used.
- Updated test scripts.
Signed-off-by: Yuriy Umanets <yumanets@nvidia.com>
Change-Id: I3fce7839f7eaa67d0307071eba80b4cea472d731
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11891
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
are not supported
That will be used to test memory domains with logical
volumes, we need to make sure that lvol correctly
reports memory domains. Also add a counter for the
number of translation_cb calls and verify that
it is not smaller than the total number of
completed IO requests
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I42f0cb14fd24c95de830146a603de64f1a8848be
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11374
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
That is done to correctly handle metadata pointer which is part
of ext_opts structure. It will also be used by the next patch to
remove memory_domain pointer if request which uses local buffers
is split
Force the user to set correct ext_opts size, update API functions
description.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I77517d70df34a998d718cc6474fb4c538a42918f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11349
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Bdev modules must not access internal bdev_io
structure, so add a new pointer in a public
section. Pointer in internal section will be
used in next patch
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ib631563015b3e5fa9300d22b7ae59d8db43c8275
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10421
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is a preparation for enabling of memory domains
pull/psuh functionality. Since memory domains API is
asynchronous, this patch makes asynchronous operations
with bounce buffers.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ieb1f2a0c151149af58cfd7607dbde4c76c3c288d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10420
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
SPDK has settled on what the optimal DSA configuration is, so let's
always use it.
Change-Id: I24b9b717709d553789285198b1aa391f4d7f0445
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11532
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
The names on these were changed.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ib75a60342c08f72dad39635a9244421c1cca5485
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11793
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add a new flag is_disconnecting to struct spdk_nvme_ctrlr.
Separate calling nvme_ctrlr_disconnect() and nvme_ctrlr_disconnect_done()
by using the flag is_disconnecting.
Additionally, change nvme_ctrlr_fail() to skip setting ctrlr->is_failed
to true if ctrlr->is_disconnecting is true.
Change-Id: Ie2c74ba41f120662a30f6198751d07005d23abcf
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11000
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
