The next patch will improve media mgmt notifications but it will be
almost same as _resize_notify() and _remove_notify().
On the other hand, there are a few differences between _resize_notify()
and _remove_notify(). _remove_notify() will be better.
To avoid duplication, unify _resize_notify() and _remove_notify() by
adding abstraction event_notify() and _event_notify().
Add unit tests for the complex race conditions.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Ibe2478479c61459c0da0db8d28c7273f05275e0f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16577
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
We should always called the unregister callback on
the same thread that spdk_bdev_unregister() was
originally called. So save the thread pointer and
use an spdk_thread_send_msg() to make sure it gets
called on the correct thread when the unregister
finishes.
Also add unit test that reproduces the original
issue.
Fixes issue #2883.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib3d89368aa358bc7a8db46a8a8cb6339340469d9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16554
Reviewed-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
To allow SO_MINOR updates on LTS for the whole year it is supported,
the major version for all components needs to be increased.
This is to prevent scenario where two versions exists with matching
versions, but conflicting ABI.
Ex. Next SPDK release adds an API call increasing the minor version,
then LTS needs just a subset of those additions.
Increasing major so version after LTS, allows the future releases
to update versions as needed. Yet allowing LTS to increase minor
version separately.
Disabled test for increasing SO version without ABI change, as
that is goal of this patch. This check shall be removed with SPDK 23.05
release.
Looks like this was left over from prior LTS, to avoid that
make sure it is only skipped when running against v23.01.x as latest
release.
This patch:
- increases SO_VER by 1 for all components
- resets SO_MINOR to 0 for all components
- removes suppressions for ABI tests
Short reference to how the versions were changed:
MAX=$(git grep "SO_VER := " | cut -d" " -f 3 | sort -ubnr | head -1)
for((i=$MAX;i>0;i-=1)); do find . -name "Makefile" -exec \
sed -i -e "s/SO_VER := $i\$/SO_VER := $(($i+1))/g" {} +; done
find . -name "Makefile" -exec \
sed -i -e "s/SO_MINOR := .*/SO_MINOR := 0/g" {} +
Change-Id: I3e5681802c0a5ac6d7d652a18896997cd07cc8bf
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16419
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
With per channel stats called on thread A,
spdk_bdev_for_each_channel calls
spdk_for_each_channel which immediately sends
a message to thread B.
If thread B has no workload, it may execute the
message relatively fast trying to write stats to
json_write_ctx.
As result, we may have 2 scenarious:
1. json_write_ctx is still not initialized on
thread A, so thread B dereferences a NULL pointer.
1. json_write_ctx is initialized but thread A writes
response header while thread B writes stats - it leads
to corrupted json response.
To fix this race condition, initialize json_write_ctx
before iterating bdevs/channels
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Reported-by: Or Gerlitz <ogerlitz@nvidia.com>
Change-Id: I5dae37f1f527437528fc8a8e9c6066f69687dec9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16366
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a preparation for the next patch to fix the race condition of
per channel mode.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I9eaefc527ccf82011af39b8261f5b3cc12983bda
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16365
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This VTune integration was added many years ago, but
hasn't been tested and to my knowledge is not being
used by anyone. The statistics it enables are very
limited, specific to the bdev nvme module with no
insight into the rest of an SPDK application.
So deprecate this support now, we will remove it
immediately after the v23.01 release.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5552d85084c350e9d0b2570946801acd65a89d64
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16294
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
spdk_bdev_module_init() must only be called if the module sets
async_init to true. This patch fixes the doc string to match the
implementation and adds an assert() to catch API usage errors early.
Change-Id: I677345de028c8f7597ecf81ff9b9b855867bbf01
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16133
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
In preparation for supporting additional claim types, create a claim
type that represents the current claim type. Everything that sticks to
the public APIs should continue to work as before.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I0d02e4b3f4bbf4eb5a7391028aa31e999f9da915
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15286
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In preparation for an updated claims API, refactor
bdev->internal.claim_module into a union that will eventually hold
different information based on the the type of claim.
Change-Id: I7ade6f03128bdb0f8375a95ae953cb63d6aa686d
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15285
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
This calls bdev_ok_to_examine() once per bdev_examine(). Prior to this
commit, bdev_ok_to_examine() may be called up to twice per bdev module.
The results returned by bdev_ok_to_examine() could be affected by:
1. g_bdev_opts.bdev_auto_examime changing
2. spdk_bdev_examine() being called on a particular bdev
3. An alias being added for an existing bdev
It's not clear that anything good comes from racing in conditions 1 and
3. In condition 2, spdk_bdev_examine() calls bdev_examine(), so any
required examine_config() and examine_disk() calls are still made, just
now with less of a race with the previous invocation of
spdk_examine_confg().
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I496fc44fd74693837d6b449d7fa60f58f9dbf36f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15284
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Mellanox Build Bot
This closes races between concurrent spdk_bdev_module_claim_bdev()
and/or spdk_bdev_module_release_bdev() calls affecting the same bdev by
holding bdev->internal.spinlock while claiming and releasing a bdev. It
also closes a potential TOCTOU bug in that optimizing compilers probably
already eliminate in bdev_finish_unregister_bdevs_iter() and documents
that bdev->internal.claim_module is protected by
bdev->internal.spinlock.
This can be removed when the bdev_register_examine_thread deprecation
is removed.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Ib48552df065d5172139a61bbc00b391f36552c0c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15282
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Since bdev_examine() can happen on any thread and it happens without any
other lock being held on the spdk_bdev_module, it is possible for
multiple threads to try to simultaneously increment
module->internal.action_in_progress. Decrements may also race.
This commit adds bdev_module->internal.spinlock and holds it while
modifying module->internal.action_in_progress.
This can be removed when the bdev_register_examine_thread deprecation
is removed.
Change-Id: I9c401eeb3c7c97c484e16fa9cfd82668b32e508b
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15281
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
This introduces a deprecation for calling spdk_bdev_register() and
spdk_bdev_examine() on a thread other than the app thread. The
deprecation period starts in SPDK 23.01 and removal is expected in SPDK
23.05.
The intent of this deprecation is to ensure that bdev modules'
examine_config() and examine_disk() callbacks are only ever called on
the app thread. This largely a formalization of what has long happened
due to the RPC poller running on the first thread started by
spdk_app_start().
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Ic9d7b87b6522be20357d2eab2d0c77cd5753452f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15690
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
However, when querying or resetting module specific statistics,
the generic bdev layer have to access it.
For this purpose, add functions pointers.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ie86d0a4a406cec7e0f1e9a62de5982cd3d877eae
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14839
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Define struct spdk_bdev_io_error_stat privately in lib/bdev/bdev.c.
Add a pointer to struct spdk_bdev_io_error_stat to struct
spdk_bdev_io_stat.
Allocate spdk_bdev_io_error_stat for bdev and RPC, but do not allocate
spdk_bdev_io_error_stat for I/O channel.
Dump the contents of spdk_bdev_io_error_stat only if its total is
non-zero.
As a result of these, only spdk_bdev_get_device_stat() can query
spdk_bdev_io_error_stat for the bdev_get_iostat RPC. This will be
acceptable.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Idae868afe65347a96529eedc3dcc692101de4a29
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14826
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The following patches will make some of io_stat helper functions
public APIs. Then, for consistency, bdev_ + verb + _io_stat will
be better naming rules.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: If36d4ed29253e87954c23c270e8414731d083f03
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15896
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
The internal mempools were replaced with the newly added iobuf
interface.
To make sure we respect spdk_bdev_opts's (small|large)_buf_pool_size, we
call spdk_iobuf_set_opts() from spdk_bdev_set_opts(). These two options
are now deprecated and users should switch to spdk_iobuf_set_opts().
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib1424dc5446796230d103104e272100fac649b42
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15328
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
This is done in a couple of places, so it makes sense to extract it to a
separate function.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Id34b2545d9912c2b7b65b1277711e9683db92658
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15327
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Found with misspell-fixer.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: If062df0189d92e4fb2da3f055fb981909780dc04
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15207
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Both max and min should be reset periodically. We can use the queue
depth sampling poller to reset these but the queue depth sampling poller
is optional. We extend the bdev_reset_iostat RPC to support mode to
reset all or only max/min fields.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I9ce54892f6e808f6a82754b6930092f3a16d51ff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15444
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Add max/min_read/write/unmap_latency_ticks into the struct
spdk_bdev_io_stat.
When initializing or resetting the instance of the struct
spdk_bdev_io_stat, initialize max to 0 and min to UINT64_MAX.
Then update max if a new value is larger than the current max,
and update min if a new value is smaller than the current min.
For the bdev_get_iostat RPC, it prints max and prints min if min is not
UINT64_MAX or 0 if min is UINT64_MAX.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I1b30b3825c15e37e9f0cf20104b866186de788a2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14825
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Add a helper function bdev_reset_device_stat() to reset I/O statistics.
This funciton is used for the bdev_reset_iostat RPC.
We do not have any plan to use bdev_reset_device_stat() outside
lib/bdev. Hence, we do not add this as a public API.
Then, add a new RPC bdev_reset_iostat to reset I/O statistics of a
single bdev or all bdevs.
Resetting I/O statistics affects all consumers. Add a note to CHANGELOG
and doc/jsonrpc.md.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I97af09107b5c3ad1f9c19bf3cbf027457c4fbae7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15350
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Hold not only io_stat pointer but also num_blocks and blocklen in local
variables.
This will shorten and simplify bdev_io_update_io_stat(), and improve
readability and changeability.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I527b72538a169a1faafd32863ff539306a8763a9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15732
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
The following patches will add max/min latencies and more optional
counters. This factorization will improve the readability.
In addition to factorization, add spdk_likely to check if completed
successfully or not.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I57581ece2b73d486aa138f8d26a5afaf6953a322
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15480
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For consistency, rename a JSON dump function by bdev_io_stat_dump_json()
and change the parameter order.
Other public APIs and function pointers in the generic bdev layer,
spdk_bdev_dump_info_json(), spdk_bdev_fn_table::dump_info_json, and
spdk_bdev_fn_table::write_config_json have a json_write_ctx pointer
as the last parameter. For consistency, swap a statistics pointer and
a json_write_ctx pointer.
This is another preparation to extend I/O statistics to include error
counters and module specific counters to output these via the
bdev_get_iostat RPC.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I6f3bb6f2752f7da856d4fe66c0f1f8a2eedc176b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15731
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Move a JSON dump functionbdev_get_iostat_dump() for I/O statistics
into lib/bdev/bdev.c.
The next patch will rename the function and change the parameter order.
This is another preparation to extend I/O statistics to include error
counters and module specific counters to output these via the
bdev_get_iostat RPC.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I6a90d15fcbaa2e2a250167754135623bc9e7f362
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14837
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Add helper functions, bdev_io_stat_alloc(), bdev_io_stat_free(),
and bdev_io_stat_get() for struct spdk_bdev_io_stat.
Then replace a bdev_io_stat_add() call by bdev_io_stat_get() at
spdk_bdev_get_device_stat() because the saved data is queried first.
This is another preparation to extend I/O statistics to include error
counters and module specific counters to output these via the
bdev_get_iostat RPC.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I9547757421a1de1b8cb44e0f8ade4b5c2bcad4e6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15443
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The following patches will extend I/O statistics to include error
counters and module specific counters to output these via the
bdev_get_iostat RPC.
In this case, the size of the struct spdk_bdev_iostat will be variable.
As a preparation, allocate spdk_bdev_io_stat dynamically.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I1979a9d867859d5cb5d05717bfcc677f07fa03f8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15479
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
The following patches will extend I/O statistics to include error
counters and module specific counters to output these via the
bdev_get_iostat RPC.
In this case, the size of the struct spdk_bdev_iostat will be variable.
As a preparation, allocate spdk_bdev_io_stat dynamically.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I50b57f792b451cf748ea8eb0611fe65d693d5a14
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15478
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
The following patches will extend I/O statistics to include error
counters and module specific counters to output these via the
bdev_get_iostat RPC.
In this case, the size of the struct spdk_bdev_iostat will be variable.
As a preparation, allocate spdk_bdev_io_stat dynamically. For the
per_channel mode, we can share the bdev_ctx->stat because
spdk_bdev_get_io_stat() always overwrites stat.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I51cd550f52dc3b7d0f3f825fd48bcbeb3ecdcff2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14836
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Replace comments saying that particular locks must be held with
assertions that enforce that those locks are held. Remove the comments
so that there is no chance of comments and code getting out of sync in
the future.
This also fixes a caller of bdev_close() that did not hold a required
lock.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I3a540f1ad9b9826f925c523986334aa8fcd302f2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15440
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is unsafe, because we touch need_buf_* queues, which aren't
thread-safe. Also, documented this requirement in
spdk_bdev_io_get_buf()'s description.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Iabc141e051c543fdd51f079ae212f69e980d8148
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15668
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Added new API 'spdk_bdev_histogram_get_channel' to get histogram of
a specified channel for a bdev. A callback function is passed to it
to process the histogram.
Change-Id: If5d56cbb5fe6c39cda7882f887dcc9c6afa769ac
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15539
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Print out the specific values in this SPDK_ERRLOG,
this can help to find where the error is.
Change-Id: I2a38aa2d4270e0bbf554ddb348a73d40967d1b16
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15618
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
SPDK threads generally run on dedicated cores and locks should be rarely
contended. Thus, putting a thread to sleep while waiting on a mutex does
not free up CPU cycles for other pthreads or processes. Even when
running in interrupt mode, lock contention should be low enough that
spinlocks are a net win by avoiding context switches.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I6e2e78b2835bbadb56bbec34918d998d75280dfd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15438
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
`BDEV_IO_NUM_CHILD_IOV` and `BDEV_RESET_IO_DRAIN_RECOMMENDED_VALUE`
are public macro definitions without `SPDK_` prefix, so we add the
`SPDK_` prefix to them.
Change-Id: I4be86459f0b6ba3a4636a2c8130b2f12757ea2da
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15425
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The bdev hot remove might be an async process. The bdev_open will
return an error during the hot remove process. If someone invoke the
bdev_get_bdevs API when a bdev is in the middle of a hot remove
process, the spdk_for_each_bdev function will stop its loop when a
bdev_open return an error. Thus the bdev_get_bdevs will only return
partual bdevs or even return an empty list if the hot remove bdev is
the first bdev in the loop. When spdk_for_each_bdev and
spdk_for_each_bdev_leaf loop for each bdevs, if a bdev returns an
error, we skip that bdev instead of stop the whole loop.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: Ib35b817e23e47569fc5762a883b4ff8e322ae173
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15322
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Remove automatic generation of UUIDs for bdevs
that do not provide this value themselves.
This is to clarify whether this field can be
depended upon.
Modified match files to reflect change in UUID
generation.
Disabled nullglob shell option, as it deletes
empty arrays during word splitting. Bdevs with no
aliases would instead of "[]", have nullpointer
printed, which makes resulting JSON invalid.
Part of enhancement proposed in #2516.
Change-Id: Ic1d5f8f8d001ae1a219e876aef2a19b1ff0b2f2c
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15150
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Add helper functions, bdev_iostat_ctx_alloc() and bdev_iostat_ctx_free()
for the bdev_get_iostat RPC.
The following patches will allocate spdk_bdev_io_stat dynamically for
bdev_get_iostat_ctx.
This is a preparation for that.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ib71d6fb92d8134d2282507e62874f19045b630b7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15442
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
The bdev_get_iostat RPC uses two types of contexts, one to manage the
progress of the bdev_get_iostat RPC and another to call
spdk_bdev_get_device_stat().
However, this was hard to find from the source code.
To make us easier to find this, rename the former by rpc_ctx and the
latter by bdev_ctx. Then rename related functions and variables accordingly.
Furthermore, relocate request and decoder declaration to improve
readability.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I3472c87fe4ec1f5981a49ef79148534fbb1d46c4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15349
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
RPC parameters and decoders for the bdev_get_iostat RPC are used only
by rpc_bdev_get_iostat(). Locating RPC parameters and decoders close to
rpc_bdev_get_iostat() clarifies it. Furthermore, this will simplify code
review for the next patch.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I1b1b428e3eb3bb4422e490c5f4324f0e40f9710f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15416
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For I/Os controlled by QoS, TRACE_BDEV_IO_DONE is collected after
redirecting to the original thread. Hence, TRACE_BDEV_IO_START should
be collected on the original thread too.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I15411be823450ee5ddaa7582509a7aa068476fc5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14824
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
per Intel policy to include file commit date using git cmd
below. The policy does not apply to non-Intel (C) notices.
git log --follow -C90% --format=%ad --date default <file> | tail -1
and then pull just the 4 digit year from the result.
Intel copyrights were not added to files where Intel either had
no contribution ot the contribution lacked substance (ie license
header updates, formatting changes, etc). Contribution date used
"--follow -C95%" to get the most accurate date.
Note that several files in this patch didn't end the license/(c)
block with a blank comment line so these were added as the vast
majority of files do have this last blank line. Simply there for
consistency.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Id5b7ce4f658fe87132f14139ead58d6e285c04d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15192
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Add API spdk_bdev_io_get_submit_tsc to get submit tsc of a bdev I/O,
which can be used in bdev modules to avoid calling expensive
spdk_get_ticks().
Change-Id: Ifbcecb1bc663344997c5e73b72a1dfb5d0422946
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14989
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
The bdev*_with_md APIs now allow to pass NULL md
pointer, so calling this function without checking
for metadata simplifies code
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: I364a646630bd36120231ea87a41fea05df51befb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15090
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
In the following patches, we will add a feature to inject data
corruption to the error bdev module. For read I/O, we will have
to inject data corruption at completion. However, if we use
spdk_bdev_part_submit_request(), it will not be possible because we
cannot add any custom operation into the completion callback.
To fix the issue, modify spdk_+bdev_part_submit_request() and
rename it to spdk_bdev_part_submit_request_ext().
Fortunately, we can use stored_user_cb in struct spdk_bdev_io.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I46d3c40ea88a3fedd8a8fef6b68ee417c814a7a1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15002
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Copy operation is defined by source and destination LBAs and LBA count
to copy. For destiantion LBA and LBA count we reuse exiting fields
`offset_blocks` and `num_blocks` in `struct spdk_bdev_io`. For source
LBA new field `src_offset_blocks` was added.
`spdk_bdev_get_max_copy()` function can be used to retrieve maximum
possible unsplit copy size. Zero values means unlimited. It is allowed
to submit larger copy size but it will be split into several bdev IOs.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I2ad56294b6c062595c026ffcf9b435f0100d3d7e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14344
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Mellanox Build Bot
Add a new parameter "-c" to display the per channel IO statistics
for required Bdev
./scripts/rpc.py bdev_get_iostat -b Malloc0 -h
usage: rpc.py [options] bdev_get_iostat [-h] [-b NAME] [-c]
optional arguments:
-h, --help show this help message and exit
-b NAME, --name NAME Name of the Blockdev. Example: Nvme0n1
-c, --per-channel Display per channel IO stats for specified device
This could give more intuitive information on each channel's processing
of the IOs with the associated thread on the same Bdev.
Please also be aware that the IO statistics are collected from SPDK
thread's related channel's information. So that it is more relating
to the SPDK thread. And in the dynamic scheduling case, different
SPDK thread could be running on the same Core.
In this case, any seperate channel's IO statistics are returned to
the RPC call and if needed, further parse of the data is needed to
get the per Core information although usually there is one thread
per Core.
On the other hand, user could run the framework_get_reactors RPC
method to get the relationship of the thread and CPU Cores so as
to get the precise information of IO runnings on each thread and
each Core for the same Bdev.
Change-Id: I39d6a2c9faa868e3c1d7fd0fb6e7c020df982585
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13011
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
And also related function pointers and APIs:
spdk_bdev_for_each_channel_msg;
spdk_bdev_for_each_channel_done;
spdk_bdev_for_each_channel_continue;
Change-Id: I52f0f6f27717d53c238faf2f998810c9c5ee45d4
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14614
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
The following patches will allow the caller to specify a custom
completion callback to spdk_bdev_part_submit_request(). To do it
easily, consolidate completions of all I/O types into
bdev_part_complete_io().
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I083695189daa7e5271787c50947e428d01a83677
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15001
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add new bdev property split_on_write_unit which, if set to true, causes
writes to be split to match write_unit_size and fail if not aligned to
or not multiple of write_unit_size.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: Id49f58a3288ddf5cfe4921ce4020ae4bcdd67298
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11390
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A new parameter io_drain_timeout has been added to spdk_bdev
structure. If this value is unset, the bdev reset behavior
does not change.
The io_drain_timeout controls how long a bdev reset must wait for IO
to complete prior to issuing a reset to the underlying device.
If there is no outstanding IO at the end of that period, the reset
is skipped.
Change-Id: I585af427064ce234a4f60afc3d69bc9fc3252432
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14501
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
These functions start from a given offset and seek for next
data or for next hole. For bdevs that do not support seeking,
it is assumed that only data and no holes are present
Signed-off-by: Damiano Cipriani <damiano.cipriani@suse.com>
Change-Id: I6bc831970223333b25683f60ce3fcbbfebb5bb81
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14361
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
The generic bdev layer has a public API spdk_bdev_get_qd() but its
value is the most recently measured value and it requires qd sampling
to be enabled. We will have bdev modules to want to wait until
all bdev_ios are aborted by a reset. Unfortunately, spdk_bdev_get_qd()
is not suitable for the custom bdev module. Furthermore,
spdk_bdev_channel::io_outstanding is not accessible from bdev modules.
Hence, add a new public API spdk_bdev_get_current_qd().
This function should be used only from the bdev module and it should
be ensured that the bdev is not unregistered during execution.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ica30a8d8fe3264e28f0772a39bdf5f9ba72933e1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12791
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Some use cases want to abort every bdev_io submitted to the bdev by
traversing the bdev channels.
However, struct spdk_bdev_channel is private in lib/bdev/bdev.c.
Hence, add a helper function spdk_bdev_for_each_bdev_io() to execute
the function on the appropriate thread for every bdev_io submitted
to the bdev.
This function should be used only from the bdev module and it should
be ensured that the bdev is not unregistered during execution.
We keep this function as generic as possible because we may have
other use cases in future.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ic0209361bd1228ea8d4cb3241d0df07106be58d9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12751
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Add indication of support for compare, compare & write and abort
in json bdev info dump.
Signed-off-by: Jonas Pfefferle <pepperjo@japf.ch>
Change-Id: Ifc8dc1a1b180f08fcd9e9d58684eab1fd50356ff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14137
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If the bdev does not natively support compare we use
the fall-back which performs a read instead of a compare
operation. We then compare the results of the read with
the buffer provided by the user. In case the bdev has
metadata, there are two options:
1) md is interleaved -> the md will be part of the data
buffer allocated for the read and compared accordingly
2) md is separate -> currently we do not compare
the metadata but just ignore it.
This patch fixes 2) by comparing the md buffer after
the read is done.
Signed-off-by: Jonas Pfefferle <pepperjo@japf.ch>
Change-Id: I1018b8c02540bffcba69408eb283bdc8f06bb747
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14132
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
bdev_io is allocated from a memory pool and is not zeroed on reuse.
So set bdev_io->u.bdev.ext_opts = NULL for io ops where it is not
supported (yet) so we can test against it.
Signed-off-by: Jonas Pfefferle <pepperjo@japf.ch>
Change-Id: Ia579ea6b0787cf62572ea3a6bf2251867602e952
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14056
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
This will allow us to map spdk_bdev_io events
to nvme_request events coming in a future patch.
Since we pass the nvme_bdev_io to the nvme driver
(not the spdk_bdev_io), we need to add tracepoints
for the nvme_bdev_io so that spdk_trace can
do the spdk_bdev_io->nvme_bdev_io->nvme_request
mapping.
An alternative would have been to pass the spdk_bdev_io
as the cb_arg to the nvme driver, but that change
seemed to invasive, and I think we will find other
uses for the nvme_bdev_io events anyways.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id7519e689b01875093359f41a1ca2af912061a8b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13994
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Wait for all bdevs to finish examination before
proceeding with the spdk_bdev_finish shutdown
logic. This ensures the bdev layer and its
modules are not trying to examine bdevs after
the bdev layer has reported it has shut down.
Theoretically, bdev modules could all defer their
fini callbacks until any outstanding examinations
are complete, but it is WAY simpler to just use
the existing spdK_bdev_wait_for_examine API
instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If90cc2a786281d348b82de8beb17ac37ba269c64
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13850
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We have to process whole QoS queue on each QoS poll. It may contain
IOs that still have quota or not affected by QoS rules at all. If we
stop on the first queued IO, all IOs will be limited by the minimum
QoS rule even if they're not affected by this rule.
Here is an example and simple test. We have a NVMf target with Null
bdev and QoS configured with read bandwidth limited to 10 MB/s and
write bandwidth limited to 100 MB/s. First we start nvme_perf with
only write IOs and we see that reported bandwidth is 100 MB/s. Then we
start another instance of nvme_perf with only read IOs. We see that
reported read bandwidth is 10 MB/s but we also see that write
bandwidth also drops to 10 MB/s.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I1edf09d038e65f873deef19ecb0f4bf9725a5ca5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13767
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
When a bdev is registered, it is examined by the bdev modules before the
bdev register even is notified.
Examination may be asychronous, e.g. when the bdev module has to perform
I/O on the new bdev.
This causes a race condition where the bdev might be destroyed while
examination is not finished. Then, once all modules have signaled that
examination is done, `bdev_register_finished` makes an invalid access to
the freed bdev pointer.
To fix this, defer the unregistration until the examine is completed by
opening a descriptor on the bdev.
Change-Id: I79a2faa96c1c893fc1cee645fbe31f689b03ea4a
Signed-off-by: Nathan Claudel <nclaudel@kalray.eu>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13630
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It is a nicer API to allow users to use an
md-related API such as spdk_bdev_read_blocks_with_md
passing md_buf as NULL to mean "don't read metadata".
This avoids the need for an if-statement in the users
code to check if the md buffer is NULL before deciding
which API needs to be called.
This basically requires two changes:
1) only check if the metadata is separate for the bdev
if the md_buf != NULL
2) do not fail if the buffer is specified but the
md buffer is not (we only need to fail the case where
the md buffer is specified but the data buffer is not)
Note that spdk_bdev_readv/writev_blocks_ext was already
allowing the metadata buffer to be NULL, but change
those functions too to match the others on how we check
if the data buffer isn't allocated.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I764cf49b9f573fccb19e73876a376fd231cc3580
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13612
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Fix issue: #2561
The issue here is that in the bdev_set_qd_sampling_period RPC
command, the QD sampling period has been set. Then later the
related Desc is closed and in the bdev_close() function the
QD sampling period is reset to 0.
A new QD desc is added as the QD sampling period update could
be handled properly.
Meanwhile, a new QD Poll In Progress flag is also added so as
to indicate there are ongoing events of QD sampling and the
Bdev unregister will be handled in the proper way.
Related test case and unit test also updated for this change.
Change-Id: Iac86c2c6447fe338c7480cf468897fc8f41f8741
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13016
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
In SPDK, declarations have the return type on the same line. Definitions
have the return type on a separate line. Astyle has an option for
enforcing this. Unfortunately, it seems to have two bugs:
1) It doesn't work correctly at all on C++ files.
2) It often fails on functions that return enums, or long type names
Deal with 1) by adjusting the check_format.sh script to only tell astyle
to fix return type line breaks for C files and not C++. Deal with 2) by
adding a few typedefs to work around the problem.
Change-Id: Idf28281466cab8411ce252d5f02ab384166790c6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13437
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
It's useful to add these APIs.
spdk_copy_iovs_to_buf and spdk_copy_buf_to_iovs.
It prepares that other ones can call these.
We don't need to define them in static state
repeatedly.
And add corresponding unit tests.
Change-Id: Ife40fec8d047a48af67b04e6c055e4932282abfb
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12075
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Many open source projects have moved to using SPDX identifiers
to specify license information, reducing the amount of
boilerplate code in every source file. This patch replaces
the bulk of SPDK .c, .cpp and Makefiles with the BSD-3-Clause
identifier.
Almost all of these files share the exact same license text,
and this patch only modifies the files that contain the
most common license text. There can be slight variations
because the third clause contains company names - most say
"Intel Corporation", but there are instances for Nvidia,
Samsung, Eideticom and even "the copyright holder".
Used a bash script to automate replacement of the license text
with SPDX identifier which is checked into scripts/spdx.sh.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaa88ab5e92ea471691dc298cfe41ebfb5d169780
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12904
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: <qun.wan@intel.com>
ext_io_opts uses the size member to allow backwards
compatibility however currently we only check if it is
below or equal the current size of the opts struct and
that it is not 0. size is only used when we copy opts
because of split or push/pull.
This patch introduces size checks to allow safe access
to e.g. metadata and memory domain pointers of the user
provided opts pointer. The minimum size of the struct
passed is now the size of the initial version of
spdk_bdev_ext_io_opts. To not introduce additional
checks when opts are consumed by a bdev module we
now always copy if the size is smaller than the
current opts struct size.
When introducing new members to opts additional
checks might be needed if those are directly accessed
through the passed pointer or bdev_io->internal.ext_opts.
Change-Id: Ibd181a5840a3d5022018a9f61403df961ffd6e1d
Signed-off-by: Jonas Pfefferle <pepperjo@japf.ch>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12550
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
To fix issue: #2484
When unregistering the bdev, will send out the message
to each thread to abort all the IOs including IOs from
nomem_io queue, need_buf_small queue and need_buf_large queue.
The new SPDK_BDEV_STATUS_UNREGISTERING state is newly
added to indicate this unregister operation.
In this case, the bdev unregister operation becomes the
async operation as each thread will be sent the message
to abort the IOs and as the last step, it will unregister
the required bdev and associted io device.
On the other hand, the queued_resets will be handled
separately and not aborted in the bdev unregister.
New unit test cases are also added:
enomem_multi_bdev_unregister: to abort the IO from
nomem_io queue during the unregister operation
bdev_open_ext_unregister: to handle the events and
async operations from the unregister operation
Change-Id: Ib1663c0f71ffe87144869cb3a684e18eb956046b
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12573
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Move check if opts needs copy to its own function.
Move check if opts is valid into its own function.
Signed-off-by: Jonas Pfefferle <pepperjo@japf.ch>
Change-Id: Ie006ddd0b642eb97aaa3ab13890800322dee7a42
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12571
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
These were deprecated in 2019, it's time to remove
support for them now.
Fix ocf test script that was still using the
deprecated get_bdevs RPC name - change it to
bdev_get_bdevs.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7f8caedc250b80503671a0236694181613f63860
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12553
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
The partition bdev checks if the underlying device supports
the io type and sends the bdev_io directly down to the bdev.
This patch adds missing compare and compare&write io types
to the partition bdev.
Signed-off-by: Jonas Pfefferle <pepperjo@japf.ch>
Change-Id: Ice7e5c0332ce7e564bad2bb8d7f4bb1d535388c1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12390
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
The bdevio test app has some test cases verifying
that write zeroes commands are handled correctly,
but using knowledge of the ZERO_BUFFER_SIZE that
the bdev library uses for splitting larger write
zeroes commands. Instead of hardcoding that 1MB
value in bdevio.c, have bdevio.c use ZERO_BUFFER_SIZE
directly instead. But this requires moving
ZERO_BUFFER_SIZE into bdev_internal.h and having
bdevio.c include that file.
We do this instead of putting ZERO_BUFFER_SIZE in
the public API because we don't want users to
make any kind of dependencies on this value.
While here, also rename the tests that are using this
value, so that the test names don't include any reference
to the specific size of this bdev-internal zero buffer
size.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia29d92a706cb1f86b4c29374dc2a9beccf679208
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12383
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
There is a race condition when a bdev is unregistered while reset is
submitted from the upper layer very frequently.
spdk_io_device_unregister() may fail because it is called while
spdk_for_each_channel() is processed.
spdk_io_device_unregister io_device bdev_Nvme0n1 (0x7f4be8053aa1)
has 1 for_each calls outstanding
To avoid this failure, defer calling spdk_io_device_unregister() until
reset completes if reset is in progress when unregistration is ready
to do, and then reset completion calls spdk_io_device_unregister()
later.
A bdev cannot be opened if it is already deleting. So we do not need
to hold mutex.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ida1681ba9f3096670ff62274b35bb3e4fd69398a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12222
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
spdk_for_each_bdev() can be applied simply to rpc_bdev_get_bdevs()
because the callback function rpc_dump_bdev_info() is synchronous.
spdk_for_each_bdev() cannot be applied simply to rpc_bdev_get_iostat().
The factored-out callback function _bdev_get_device_stat() is
asynchronous. Add desc pointer to struct spdk_bdev_io_stat and open
before and close after executing spdk_bdev_get_device_stat().
Replace spdk_bdev_get_by_name() by spdk_bdev_open_ext() when a bdev name
is specified.
spdk_bdev_register() checks if the name of each bdev is set and each bdev
is opened while collecting its stats now. Hence it is not possible that
spdk_bdev_get_name() returns NULL. Simplify rpc_bdev_get_iostat_cb()
based on this fact.
Furthermore, we want to fail the RPC for all failures. The callback
function to spdk_bdev_get_device_stat() is executed after stack
unwinding if successful. Defer starting RPC response until it is ensured
that all spdk_bdev_get_device_stat() calls will succeed or there is no bdev.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I7b036d6d707c49d19c8922a159b12b5b5ce7ca41
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12089
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
To execute a callback function for each registered bdev or unclaimed
bdev, add new public APIs, spdk_for_each_bdev() and
spdk_for_each_bdev_leaf().
These functions are safe for race conditions by opening before and
closing after executing the provided callback function.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I59b702ffec7b4fc5e9779de5a3a75d44922b829b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12088
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Bdev open/close will be done for each bdev when traversing the bdev
list. This patch is a preparation.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I2486bd823953fe020ed6106844877e1cf49d8a0d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12126
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_io_device_unregister() send message to call its callback. So to
make the following patches easier, consolidate g_bdev_mgr.mutex unlocks
to the end of spdk_bdev_close().
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ib3b5c72be06e764918da30d7aa9fbc2ccd33956e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12125
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Bdev open/close will be done for each bdev when traversing the bdev
list. This patch is a preparation.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I4e4fe6f1248176631a74c09585c931b21eb49d2b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12124
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
