Previously, test data buffer was filled by one value, 0xAB, but
this may not be enough to detect future potential issues.
ut_data_pattern_verify() already did per-byte check, but size of
test data buffer is small and completion time of tests is not long.
So, even if we change ut_data_pattern_generate() to set per-byte
data instead of memset(), extra overhead of test completion time
will be negligible.
Change-Id: I35677b238f96a73c0c408f0818f080a92492dac6
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/445430
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Allow user to add seed value for guard compuation to DIF context.
This will avoid the guard being zero in case of all zero data.
NVMe controller doesn't support seed value for guard computation
explicitly, and hence if we want to use such a seed value in
NVMe controller, we have to format metadata more than 8 byte,
and add seed value into the reserved metadata field.
But some popular iSCSI/FC HBAs and SAS controllers have supported
seed value for guard computation, and so supporting seed value
in the SPDK DIF library is very helpful for some use cases.
Hence this patch makes the DIF library possible to specify seed
value for those use cases.
Change-Id: I7e9e87cb441bf263e64605c7820409fdc22dd977
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444334
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
When ran SPDK UT on arm64 system, observerd the valgrind fault:
ARM64 front end: branch_etc
disInstr(arm64): unhandled instruction 0xD5380000
disInstr(arm64): 1101'0101 0011'1000 0000'0000 0000'0000
==959274== valgrind: Unrecognised instruction at address 0x4014c90.
It is because that arm64 is not supported completly in the latest
valgrind release v3.13.0.
With the patch, SPDK UT can run successfully on arm64 system.
Change-Id: I5b77692f6b148b171fb07dcc1516d194d7ab58b9
Signed-off-by: tone.zhang <tone.zhang@arm.com>
Reviewed-on: https://review.gerrithub.io/c/444984
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change-Id: I0c1be8860263a6eed72f2d572fc594c084535ee8
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443579
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This patch refactors driver init and in doing so eliminates the mem
leak described in the GitHub issue. Also it is now consistent with
how the pending compression driver does init.
Fixes#633
Change-Id: Ia2d55d9e98fb9470ff8f9b34aeb4ee9f3d0478f5
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442896
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is in a effort to consolidate SCSI read and write I/O
for the upcoming transparent DIF support.
Previously conversion of bytes and blocks are done both in
SCSI layer and BDEV layer. After the patch series, conversion is
consolidated into SCSI layer.
Change-Id: Ib964a41ec22757f2a09cea22f398903f78d0781f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444779
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This is in a effort to consolidate SCSI read and write I/O
for the upcoming transparent DIF support.
Previously conversion of bytes and blocks are done both in
SCSI layer and BDEV layer. After the patch series, conversion is
consolidated into SCSI layer.
About conversion from bytes to blocks, we don't expose bdev API
spdk_bdev_bytes_to_blocks and but create private helper function
_bytes_to_blocks because we will use not block size but data
block size when we support transparent DIF feature.
Change-Id: I37169c673479c92e027e2507a0e54a1e414b43e1
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444778
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Also use the same style condition check for secondary process
with PCIE type.
Change-Id: I93c83126145255887914ef5efea1a493c8f7f767
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/444492
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Existing NVMe driver uses a global list g_nvme_init_ctrlrs
to track the controllers during initialization, and internal
function will start each controller in the list one by one
until the list is empty. We introduce a probe context
and move the global list into the context, with the context
we can enable asynchronous probe API in the next patch, also
this can enable parallel probe feature.
Change-Id: I538537abe8c1a4a82fb168ca8055de42caa6e4f9
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/426304
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previously, function spdk_nvme_probe_internal() will probe
NVMe controllers and then bring up probed controllers
into the ready state after that. Broke up original two parts
with probe and start stage, this will help us to introduce
a probe context in the next patch.
Change-Id: Ie0c55a6a5463fb437f84349b0b2b33a217ba63e0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/426303
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Althrough SPDK already provides a API to users which
can process runtime timeout NVMe commands, but it's
nice to have another API here, SPDK NVMe driver can
use it to break the endless wait. Also use the API
first in the initialization process, because we don't
want to add another initialization state with Intel
only supported log pages.
Change-Id: Ibe7cadbc59033a299a1fcf02a66e98fc4eca8100
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/444353
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Iabe45ecc7dc52d45b792a1a5b1e42bb511c13a89
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443238
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Bug introduced when some fixes for DPDK 19.02 were added.
Fixes#659
Change-Id: I5ef9ce6a5e30591fc7d2aeaa8d398effe42888f6
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/444449
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
We should never be going over these limits in the respective transports,
but add asserts to check this during testing.
Change-Id: Ifcaa82ccf58546a38020b31df54ee5d1d9822b8b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442777
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For devices that support fewer SGE elements than our default values, we
need to adjust the I/O unit size so that we don't ever try to submit
more SGLs than we are allowed to.
Change-Id: I316d88459380f28009cc8a3d9357e9c67b08e871
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442776
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently, the SPDK_BDEV_REGISTER_MODULE() macro uses __LINE__
to generate functions like spdk_bdev_module_register_187().
Typically, this is not a problem as these functions are not called directly
rather, they are only used as constructor functions to load the bdevs during
system startup.
There are languages however, (e.g rust) that require these functions to be
referenced explicitly to prevent them from being removed during the linking phase.
In order to reference them, having the names predictable (and potentially
changed per commit) makes things easier.
Change-Id: I15947ed9136912cfe2368db7e5bba833f1d94b15
Signed-off-by: gila <jeffry.molanus@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/443536
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_thread_poll()
This is an optimization if the calling function already knows the
current time.
Change-Id: I1645e08e7475ba6345a44e0f9d4b297a79f6c3c2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443634
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
DPDK 19.02 requires this mempool to be allocated via
crypto-specific function which returns rte_mempool.
To keep the amount of #ifs minimal, we'll use rte_mempool
unconditionally.
Change-Id: I3a09de41e237e168580bb92b574854e291e68a74
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443785
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also remove some unneeded stubs since the thread
library is linked by default to all unit tests.
Note that the lun.c unit tests include test_env via
the new include of ut_multithread.c. It needs ut_multithread
to simplify allocation of threads needed so that the lun.c
code can safely register pollers.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I922b5fed12ff7e2802b19d7f953c1b2352800f73
Reviewed-on: https://review.gerrithub.io/c/432919
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
mk/spdk.unittest.mk already includes mk/spdk.common.mk, so it's
not needed. This also fixes an issue where touching an included
.mk file would not trigger unit tests to rebuild if they had
this duplicated mk/spdk.common.mk include.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I41a04eb77ce468849cb9b53bd1f76df6fec06e46
Reviewed-on: https://review.gerrithub.io/c/443980
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Next patch will introduce enum spdk_dif_check_type for user to
know easily if checking DIF field is enabled or not.
This patch renames bitmask macros from SPDK_DIF_*_CHECK to
SPDK_DIF_FLAGS_*_CHECK to avoid mis-interpretation .
Using FLAGS was derived from SPDK_NVME_IO_FLAGS_PRCHK_* in
include/spdk/nvme_spec.h.
Change-Id: I89e155d047352f54091c14b9251464cd3a72a162
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/443338
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Recently, we started setting the list of RDMA wr in the parse_sgl
function. This meant that we started using a variable we hadn't before
which was uninitialized in the unit tests which caused a valgrind error.
Change-Id: I3f76ce1dcf95d1d41fe8b3f96e878859036a5031
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443791
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Those were added to allow us mocking DPDK functions
originaly defined as static inline. They are based on
a fixed DPDK version and currently require a lot of
effort to update for DPDK 19.02+. There's a different
way of mocking them:
> #define rte_crypto_op_bulk_alloc mock_rte_crypto_op_bulk_alloc
> static inline unsigned mock_rte_crypto_op_bulk_alloc() { ... }
This patch uses the above method to mock all static
inline functions before including the crypto source file
in crypto_ut. As a result we can get rid of the rte_
header copies from SPDK, which greatly reduces the
effort required to make crypto_ut work with DPDK 19.02.
Change-Id: I0f07a9ff4f1c63036e058dffd3fcf0c21e77bff3
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443592
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In the next patch we'll e.g. move the vbdev_crypto.c
include after some of those functions, so move them
to the very top of the file now.
Change-Id: I1abaf724ea10c8c6d461663ba3be0a5a37b34f4e
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443591
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The buffers are allocated and freed inside the
test suite, but aren't used for anything.
Change-Id: I341dc3315d20d15f7b571e9d18438c98a74def11
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443589
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The management channel was used in the RDMA transport prior
to the introduction of poll groups and made its way over to
the TCP transport when it was written. Eliminate it in favor
of just using the poll group.
Change-Id: Icde631dd97a6a29190c4a4a6a10a0cb7c4f07a0e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442432
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
request.c didn't have much code, so let's collapse
it into ctrlr.c and make that the place where all
software emulator of the NVMe controller, including
request handling, is done.
Change-Id: Id7c98010cb222a414a5aa0b78bfb299a0ffc418f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440592
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously, all I/O commands were implemented by simply
passing them to the bdev layer. Now, some I/O commands will
be emulated. Prepare for that by moving the code for this
function to ctrlr.c, where the emulation will occur.
Change-Id: Id34e5549e5ce216d602fb347b4506fbd324eed4e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440591
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Modify existing code of parsing primary partition table to support parsing
the secondary.
Main difference of these two tables is that they have inverse buffer layout.
For primary table, header is in front of partition entries. And for secondary
table, header is after partition entries. So add helper functions to extract
header and partition entries buffer region from primary or secondary table
based on current parse phase.
Split the exported funtion spdk_gpt_parse into two functions spdk_gpt_parse_mbr
and spdk_gpt_parse_partition_table. So spdk_gpt_parse_partition_table could be
used to parse both primary and secondary table.
Change-Id: I7f7827e0ee7e3f1b2e88c56607ee5b702fb2490c
Signed-off-by: lorneli <lorneli@163.com>
Reviewed-on: https://review.gerrithub.io/c/441200
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch fixes potential memory leak in spdk_app_parse_args() when
white or blacklist of devices is defined.
Change-Id: Ia586d77c67dbe6c664447f8431e1a7a30d624ae1
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440982
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This includes properly detecting when a key's name
extends past the end of the valid data.
Note that the unit tests were using sizeof() instead
of strlen() since some of the strings contain
NULL characters. This means that we should be
subtracting one to account for the implicit null
character at the end of the string. Note that the
iSCSI spec only says that the key/value pair has to
end with a null character - a key/value pair that
is split across two PDUs will not have a NULL character
at the end of the first PDU.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie95d6dd3b9ffa6a3902a31771ac4edb482418cce
Reviewed-on: https://review.gerrithub.io/c/442450
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Since params are parsed directly from the PDU's data
buffer, we need to know the end of the valid data. Otherwise
previous PDUs that used this same data buffer may have left
non-zero characters just after the end of the text associated
with a LOGIN or TEXT PDU.
Found this bug while debugging an intermittent Calsoft test
failure. Added a unit test to reproduce the original issue,
which now verifies that it is fixed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic3706639ff6c4f8f344fd58c88ec11e247ea654c
Reviewed-on: https://review.gerrithub.io/c/442449
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is intended to avoid a crypto failure when we have ASAN disabled.
In order to appease a scan-build error, we have to assert that the
memory address for two g_io_ctx->cry_iov.iov_base is different between
runs of _crypto_operation_complete. However, when we have asan disabled,
two subsequest calls to spdk_dma_malloc yield the same address, so
change the alignment to prevent allocating the same address.
Change-Id: Ia3dfbec5bb16d00bbe7dc136a886e0b9caea71a7
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442413
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Error check of strtol is left to users of it. But some use cases
of strtol in SPDK do not have enough error check yet.
For example, strtol returns 0 if there were no digits at all.
It should be avoided for each use case to add enough error checking
for strtol.
Hence spdk_strtol and spdk_strtoll do additional error checking
according to the description of manual of strtol.
Besides, there is no use case of negative number now, and to keep
simplicity, spdk_trtol and spdk_strtoll allows only strings that
is positive number or zero.
As a result of this policy, callers of them only have to check if
the return value is not negative.
Subsequent patches will replace atoi to spdk_strtol because atoi
does not have error check.
Change-Id: If3d549970595e53b1141674e47710fe4dd062bc5
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/441626
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
In patch fbec702944 (bdev/crypto: Set QAT alignment
requirement) we added an alignment requirement for I/O
buffers, but the internally-allocated buffers for
encryption haven't respected it.
We now allocate those buffers with the crypto bdev's
required alignment. It is only required for QAT and we
do it unconditionally, but we don't want to strcmp the
driver name in the hot I/O path just for that - the
code is to be refactored anyway.
Change-Id: I2cbc04408ddc5574f212b63536a05eb73ceba104
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441908
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This test was causing rare random failures of unit tests
Change-Id: I3031ed9a7f01018f093d9856b719b7604c5e30f1
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441875
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jakub Radtke <jakub.radtke@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
With all the patches in place, we can finally
enable having more than one simultaneous sessions
to a single vhost device.
This patch adds a unique id to the session structure,
similar to the one in a vhost device and also fills in
the implementation holes in foreach_session().
Vhost-NVMe can support only one session per device
and now has an additional check that prevents it from
starting more than one at a time.
Vhost-SCSI also has the same check now since it needs
additional work on the lcore assignment policy. The
check will be removed once the required work is done.
Change-Id: I13a32c7a0eae808e9bec63a7b8c15ec0bc2e36ed
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439324
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
It's sessions that are tied with the lcores now.
This makes the vhost devices accessible by any
thread that only locks the global vhost mutex.
The mechanism used for external device events was
refactored to serve for foreach_session() API.
Additionally, since we don't want to handle cases
where the entire vhost device gets removed while
an asynchronous foreach_session chain is pending,
a new per-vdev counter of pending async operations
was added. We'll fail the device removal request
if there are any pending operations. Eventually
we would like the device removal to be asynchronous,
but that's a todo for later.
The external events are still there, although
they only lock the mutex and call the provided
function now.
Change-Id: I20618f9420a9bc04270373469deaad8fb2049c7c
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439323
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The controller shall treat a Keep Alive Timeout in the same manner
as connection loss. If the Keep Alive feature is in use and the
timer expires, then the controller shall:
1, stop processing commands and set the Controller Fatal Status
(CSTS,CFS) bit to '1';
2, terminate the NVMe Transport connection;
3, break the host to controller association;
A timer poller is added to each subsystem to monitor timeout event.
Change-Id: I001afab8a6764f30c39df37fa96384180d117486
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439330
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Some users require to do write zeroes operation when
erasing data on lvol. Currently the default method is
unmap. This patch adds flag to spdk_rpc_construct_lvol_bdev
call that changes default erase method. This is also a base
implementation for possible future function for erasing
data on lvol bdev.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I8964f170b13c2268fe3c18104f7956c32be96040
Reviewed-on: https://review.gerrithub.io/c/441527
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This patch implements unit tests for the following modules:
* band
* PPA (Physical Page Address) translations
* write buffer
Change-Id: Ia7292bd3027347e8a3da77dafe71cde2c016bf38
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/431328
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds the support of read and write separate
bandwidth rate limits control with the configuration file.
Below is the example (in MiB) for the configuration section:
[QoS]
Limit_Read_BPS Malloc0 100
Limit_Write_BPS Nvme0n1 200
Change-Id: I0221516ce70c3fbb07b9e80c1c814ed5ba271c88
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/416672
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We know how big this should be so no need to dynamically allocate it.
Change-Id: I00ae6cb7c7f525d946d213e0f58cc5fe05bcf932
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441128
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In SPDK sock_ut, the port 3260 is tested. It is conflict with the SCSI
Target Daemon (tgtd). If the service is enabled, it makes sock_ut failure.
Suite: sock
Test: posix_sock .../home/ubuntu/spdk/lib/sock/posix/posix.c: 238:spdk_posix_sock_create: *ERROR*: bind() failed errno = 98
FAILED
The patch changes port 3260 to UT_PORT, and enhance the error log when
socket bind is failed.
Also enhance error log carrying port value in posix.c.
Change-Id: I31e47af49335cdf7eaffa44237860ebc140d2419
Signed-off-by: tone.zhang <tone.zhang@arm.com>
Reviewed-on: https://review.gerrithub.io/c/439983
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now that spdk_thread_poll can be called from within
a thread, some of the unit tests can be a bit simpler.
Change-Id: Ib7b92c3f59862e5c128f5e0cc8a08f65e2b89e93
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441160
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Purpose: To avoid the buffer contention among different
polling groups if there are multiple core configurations
for NVMe-oF tcp transport.
Change-Id: I1c1b0126f3aad28f339ec8bf9355282e08cfa8db
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/440444
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added set_read_only_lvol_bdev() RPC that marks
lvol bdev as read only.
This enables to create clones off of a base lvol,
without having to create additional lvol bdev with snapshot.
Change-Id: Ic20bbcd8fbebcef157acce44bfa1da035b0da459
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440534
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Need to check user input and return status of parsing
to prevent app or target from crashing.
Input checking function will be added in the future.
Change-Id: I8167ac13306ae4f81e2cacb80edd9dcf9382c374
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439479
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This is shared between all currently valid transports. Just move it up
to the generic structure. This will make implementing more shared
features on top of this a lot easier.
Change-Id: Ia896edcb7555903ba97adf862bc8d44228df2d36
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440416
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK NVMe driver and NVMe CLI define the parameter about DIF location as
follows:
If set to 1 and DIF is enabled, then DIF is transferred as the first 8
bytes of metadata. If set to 0 and DIF is enabled, then DIF is transferred
as the last 8 bytes of metadata. Defaults to 0.
This patch fixes the apparent inconsistency.
Change-Id: I481332bb9a6caa488664dbd1fe6039270b9f9663
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/440672
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This name more closely resembles pthread_exit, which is a
closer analogy to how the new threading library works.
Change-Id: I68b04509f3ff8e94b8688804a7e5661155a3ecd1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440597
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This mirrors pthread_create, which works more closely
to the new style where SPDK libraries can spawn their
own threads.
Change-Id: Ic524c4c35bcf7c1611e4f261ebb64b98ac5a5a1b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440596
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Instead of implicitly grabbing the thread from the thread
local variable, make it explicit.
Change-Id: I733fad06181439e12b1e71a4829b84e7b64e2468
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440595
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
These are no longer used by anything.
Change-Id: I0db6bc88e4dc945ff4f64df2ac410e1d00a669c1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/437601
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Let the application figure out how to close the
underlying block device after an init fails or
an initialized/loaded volume is closed/destroyed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id0b9b99c85ed13166ec9a229eaaa0b0eb04289fd
Reviewed-on: https://review.gerrithub.io/c/440573
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will remove the metadata from the associated backing
device and delete the pm_file associated with the reduce
volume.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I30ffd68e5ba69b31ee1be85418c5b8c592d82e70
Reviewed-on: https://review.gerrithub.io/c/437995
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The value passed comes directly from the spdk_reduce_vol structure,
meaning that we can't reference it after the associated volume
structure has been freed.
We'll need to reference this for the next patch that supports
destroy a compressed volume and unlinking the associated metadata
file.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7ec70972faaec52e405e8d51f4b645c6e623e9dc
Reviewed-on: https://review.gerrithub.io/c/437994
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This requires fixing up the unit test pmem emulation
code - we need to copy the 'persistent' buffer into
the newly 'mmaped' buffer in the pmem_map_file stub.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4e474f437922e652a57d0b45b6ef92fc713eb587
Reviewed-on: https://review.gerrithub.io/c/437888
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: Ib9de83db429e4ae6f8e0cc988ca161cebdb27c9c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/437599
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Check my_lba in gpt's primary header equals to LBA1.
Set correct my_lba in unit test to pass the test, and update
related header_crc32.
Change-Id: I124a7a883e9304bd3955ce3de6b589596c4195ea
Signed-off-by: lorneli <lorneli@163.com>
Reviewed-on: https://review.gerrithub.io/c/439889
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Appending string by using sprintf with realloc will be generally
usable and add sprintf_append_realloc() and vsprintf_append_realloc()
to the utility.
These APIs follow realloc about buffer management, i.e., the original
buffer is left untouched if they fail.
Besides, the original buffer is NULL, they are equivalent to
sprintf_alloc() and vsprintf_alloc(), respectively.
Change-Id: I8b69d9640e86e1862ddd3917995bad6f59426b7e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/436913
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Added -ffunction-sections / --gc-sections to allow the linker to remove
unused functions when linking test executables. This reduces the number
of required mock definitions to those actually required by tested code.
Change-Id: I22725ce82e22675a7c2d28c8227e586f2cd65023
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/436319
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Session struct will be now allocated inside the
`new_connection` rte_vhost callback. There can be
still only one connection per device, but this
change brings us one step towards supporting more.
Besides the obvious pointer changes, we'll now also
use the session pointer to check if the connection
actually exists. We used to set device vid to -1
when there was no connection but we no longer have
to do that.
Change-Id: I4d062c0b5f093fef132a6a2c9cc29458cbaad414
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/437776
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Because we have called _are_iovs_valid() to ensure that all blocks are
covered by iovec, and we process iovec compactly and orderly, so we
don't need to do _iov_iter_cont() check.
Since all callee are removed, so reomve definition of _iov_iter_cont()
as well.
While here, add an assertion in _iov_iter_advance() to detect
unexpected error.
Change-Id: I6b6077bafbf7ec18f14ee2835d3b99199b5e559b
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/c/439869
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
When all CPUs are set, formatted string overflows str buffer in the
spdk_cpuset structure with '\0'.
It may destroy CPUs bitmap when formatting is used, so additional
integrity checks are performed in UT.
Change-Id: I92ac790b2c215428cbe0ae89ab4b28570ddb9a0d
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440021
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
One of bugs wasn't catched because unit tests for util/cpuset wasn't
enabled.
This patch fixes bug and enables unit test.
Change-Id: I5a2d7ad76256439e3a13efc8ca51dd4b21a20e0a
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440020
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
The receive buffer and JSON values array are shared across all requests
on one connection. If RPC handlers deferre processing response, do the
lazy decode or capture JSON by pointer instead of copying it then
content of the request array might be overwritten by now. As we don't
have any requirement here we must assert that the received request is
valid till response is finished.
Fix this issue by copying request data and work on the copy. This change
also void the need of having JSON RPC 'id' field releasing over 128
bytes from each spdk_jsonrpc_request.
Change-Id: I665be446cbcd8f625e5a73514582efad3021a4ff
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/437160
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
For separate metadata payload, Introduce a struct to collect DIF error
information and pass the reference to the struct to bit-flip error injection
and verification.
This change will make logging of DIF error and comparison between
injection and verification possible for separate metadata payload.
Merging this patch to the previous is possible but add this as a separate patch
to reduce the patch size.
Change-Id: Ifce2130e902bc090cbe205fa8df12559739ced57
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/435097
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This patch adds APIs to generate and verify DIF for SGL
payload with separate metadata as byte alignment and granularity.
Change-Id: I4e553c9b6f8c96e576a69115002963d32379d439
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/434150
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For copied extended LBA payload, Introduce a struct to collect DIF error
information and pass the reference to the struct to bit-flip error injection
and verification.
This change will make logging of DIF error and comparison between
injection and verification possible for copied extended LBA payload.
Merging this patch to the previous is possible but add this as a separate patch
to reduce the patch size.
Change-Id: I9f7ac1332fe63cb206c692d0876c8de41ef9286f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/435227
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds APIs to copy data and generate and verify DIF
for internally created extended LBA payload.
This patch is for read strip and write insert operation to make
DIF transparent to the upper layer.
Change-Id: I025f35571490aa197aac5e7572549e31c2479b41
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/432987
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Introduce a struct to collect DIF error information and pass
the reference to the struct to bit-flip error injection and
verification.
This change will make logging of DIF error and comparison between
injection and verification possible.
Change-Id: I43941f1a7f4b0ad1e8ff324f2ac8fad9e195a100
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/438023
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This is useful for proving to scan-build that we are not using a mocked
function. Sometimes it needs to be called repeatedly every time any mock
variables are called.
Change-Id: Id0ef196620c2984252f792a7e40162e10b989748
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/437997
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
It is probably best to clear the pointers to global memory when those
pointers are no longer valid. It also helps make the unittest a little
bit clearer.
Change-Id: I73f9568f40ba8bff63f4e3346c83a48766f26129
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/437991
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Modifed scripts/detect_cc.sh to take additional parameter specifing
the linker to use. Default to LLD on FreeBSD systems.
Change-Id: Idf97e9676a144028c0803d272ae6f0e903b0dd1f
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/438801
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch reduces the number of parameters of APIs by setting
necessary information to context struct and pass it to APIs.
This will simplify the code and will clarify the core logic.
Besides, by introducing context data, update of reference tag
is further consolidated.
Change-Id: I1b3eec596847eb4ef1cf43441035df21f746192a
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/438021
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The case that metadata is supported but DIF is not enabled was
handled as error. But the case is described as an normal case
in NVMe specification.
This patch changes the case to normal.
Besides a break was missing and added in this patch.
Change-Id: I784c36fed3b92da9ae5500d945f1dc20a2ca406b
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/438362
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We do not want to present those subsystems which are not
ready.
Change-Id: I7f5c171fbac4c31d839421e37e93e62569c0e87a
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/437222
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Since division is more expensive than right shift operator, in
function spdk_bdev_bytes_to_blocks, use right shift instead of
division if the blocklen of bdev is a power of two.
Change-Id: Ib3dbc792e86582bba30b3dc028efbd12c69075ba
Signed-off-by: lorneli <lorneli@163.com>
Reviewed-on: https://review.gerrithub.io/438318
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The scan-build error this fixes assumes that we do not reallocate an
iov_base for the g_bdev_io object in between calls to
_crypto_opration_complete. So I explicitly tell it that's what we are
doing.
Change-Id: Ie15c517ea60a2a527a0520005cb044ab2ba4412e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/437988
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Each connection is created with the `new_connection`
rte_vhost callback with a unique vid parameter. Storing
the vid inside the device struct was sufficient until
we wanted to have multiple connections per device.
Change-Id: Ic730d3377e1410499bdc163ce961863c530b880d
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/437775
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Grouped a few spdk_vhost_dev struct fields into a new
struct spdk_vhost_session. A session will represent the
connection between SPDK vhost device (vhost-user slave)
and QEMU (vhost-user master).
This essentially serves two purposes. The first is to
allow multiple simultaneous connections to a single
vhost device. Each connection (session) will have access
to the same storage, but will use separate virtqueues,
separate features and possibly different memory. For
Vhost-SCSI, this could be used together with the upcoming
SCSI reservations feature.
The other purpose is to untie devices from lcores and tie
sessions instead. This will potentially allow us to modify
the device struct from any thread, meaning we'll be able
to get rid of the external events API and simplify a lot
of the code that manages vhost - vhost RPC for instance.
Device backends themselves would be responsible for
propagating all device events to each session, but it could
be completely transparent to the upper layers.
Change-Id: I39984cc0a3ae2e76e0817d48fdaa5f43d3339607
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/437774
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Previously, we allocate the buffer size according
to the MaxQueueDepth info, however this is not exactly
a good way for customers to configure, we should provided
a shared buffer number configuration for the transport.
Change-Id: Ic6ff83076a65e77ec7376688ffb3737fd899057c
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/437450
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For DIF and DIX, read strip and write insert operation will copy
data together with DIF generation and verification.
This patch adds spdk_crc16_t10dif_copy for those cases.
Change-Id: I9a77fa8b367486fe0b6704d58dcdf95d5210c875
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/437461
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch adds APIs to inject bit flip error into any field
of the extended LBA payload.
Change-Id: I3ca601999e55ea6228bb525ac8c0744c7df32398
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/434292
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Introducing helper functions will simplify a little complex
implementation.
Change-Id: I94911497b8aecc0ffbd148519ce22501ef69c79d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/435387
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
DIF and DIX will be supported in SPDK throughout, e.g., NVMe
driver, NVMe-oF initiator and target, NVMe block device, malloc
block device, SCSI, iSCSI target, FIO plugin, and Perf.
Generic and common APIs to generate and verify DIF and inject
bit flip error to any field will be helpful for them.
This patch is the first in the patch series.
This patch adds APIs to generate and verify DIF for SGL extended
LBA payload as byte alignement and granularity.
Change-Id: Ie6588d960113761f10efbf2d2a3cae004af37ce8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/432261
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
