Make the vdev initialization happen before calling
any vdev related functions. This is mostly needed
for an upcomming patch where additional step is
required after initializing the vdev and before
starting rte vhost.
On the other hand, this patch also fixes a technically
possible scenario where rte vhost starts processing
vhost-user messages and calling our ops before the
related vdev was initialized.
Change-Id: I8fbc7e7bc0b364327cfcec60faa74d4f64d6fad8
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447024
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
rte_vhost requires all queues to be fully initialized
in order to start I/O processing. This behavior is not
compliant with the vhost-user specification and doesn't
work with QEMU 2.12+, which will only initialize 1 I/O
queue for the SeaBIOS boot. Theoretically, we should
start polling each virtqueue individually after
receiving its SET_VRING_KICK message, but rte_vhost is
not designed to poll individual queues. So we use
a workaround to detect when a vhost session could be
potentially at that SeaBIOS stage and we mark it to
start polling as soon as its first virtqueue gets
initialized. This doesn't hurt any non-QEMU vhost slaves
and allows QEMU 2.12+ to boot correctly. SET_FEATURES
could be sent at any time, but QEMU will send it at
least once on SeaBIOS initialization - whenever
powered-up or rebooted.
Vhost sessions are still mostly started/stopped from
within rte_vhost callbacks, but now there's additional
concept of "forced" polling, in which SPDK starts
sessions manually, while rte_vhost still thinks the
sessions are stopped. This can potentially lead to cases
where a session is "started" twice, or gets destroyed
while it's still being polled (by force). Those cases
also need to be handled within this patch.
Change-Id: I70636d63e27914906ddece59cec34f1dd37ec5cd
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446086
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Array channels in the subsystem's poll group are indexed by
nsid - 1, so rename the previous num_channels to num_ms
makes more sense. Also embed the channels into a namespace
data structure here, and this can be reused in the following
patch.
Change-Id: If5d9aab4b1d5bcf7a3c22f29fa58d84752f0d4cc
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446211
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This unifies the clean up path between SRQ and normal
operation.
Change-Id: I396d7e3749579f27b5bb1e89b9d6761a77ba5beb
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446979
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Depending on whether SRQ is enabled, resources may be allocated
to the rqpair or to the rpoller. Create a struct to hold these
pointers that can be used in both locations to avoid duplicated
code.
Change-Id: I2c8fc59009201d9e41721e6462a81732b529a9e0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446978
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Eugene Kochetov <evgeniik@mellanox.com>
This wasn't used anywhere.
Change-Id: I405af3c808be284d19218f3f04c1e90e33e31de8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446977
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
This patch adds support for many-to-one configuration
for OCF bdev. Meaning that one cache instance can
be used to cache multiple core devices.
Without this change, it is not possible
to attach core device to existing cache instance.
Change-Id: Idfce023c08b6d41490d590a8abb51f626252cd4d
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/444277
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
FTL should pass IO errors to upper layer only in
completion callback to be consistent on sync and
async error paths.
Change-Id: I29c81af477b476c1e10b7933126737a222553ffa
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447176
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch allows to process more then one I/O
completion per reactor iteration.
Change-Id: Ib58013cd96c2b7fe378f175b34d58c6d1d219dcd
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447175
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_iscsi_conn_read_data was changed to use sock_readv
instead of sock_recv as a refactoring effort.
However this change caused about 3% performance degradation
for write I/O.
Hence this patch changes spdk_iscsi_conn_read_data to use
sock_recv and changes spdk_iscsi_conn_readv_data to call
spdk_iscsi_conn_read_data if iovcnt is 1.
Change-Id: I5fcad03ff23dee4e9954eee879225d3c493be52e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448021
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_iscsi_get_dif_ctx() didn't work correctly for Data In PDU
because we had to get iSCSI task from PDU directly for Data In PDU,
and lun_id was not copied in spdk_iscsi_task_get().
This patch fixes these bugs and the DIF strip feature was verified
after applying this patch.
Change-Id: I74d404b82c4a9502a9a8e166748f817d3c2e4368
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447884
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Users may want to connect specified controller at running time,
so this API will connect to the controller and return probe context
to users, users must call spdk_nvme_probe_poll_async() to initialize
the controller to the READY state before using it.
Change-Id: I232886b000454ee826ea73c4e1043d0d18ee0ec6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445657
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Those targets use the same directories for temporary
files and at the moment they race with each other. We're
seeing intermittent failures on CI:
```
INSTALL [...]/ocf/env/src/ocf/utils/utils_list.c
rm: missing operand
```
```
INSTALL [...]/ocf/env/src/ocf/utils/utils_device.h
INSTALL [...]/ocf/env/src/ocf/utils/utils_io.c
rm: cannot remove [...]/ocf/env/src/ocf/utils': Directory not empty
```
Fixes#709
Change-Id: I9bf6ee7a97144afafbb643a0e350f38abe79270f
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447750
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The purpose is to use the single readv to read both
the payload the digest(if there is a possible one).
And this patch will be prepared to support the
multiple SGL in NVMe tcp transport later.
Change-Id: Ia30a5e0080b041a65461d2be13db4e0592a70305
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447670
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
VHOST_USER_SET_VRING_CALL invalidates the previous
file descriptor that SPDK may be using on a different
thread. The new descriptor is stored inside rte_vhost
internals and is queryable with rte_vhost APIs, but
those APIs are too expensive to be called every tick
or every time we need to use that fd. Hence, we will
now stop the entire vhost session before processing
SET_VRING_CALL msg and restart it right after. SPDK
will query the most recent call descriptor on session
start.
We do not necessarily have to stop the device - just
letting the session know that its callfd has changed
would be enough. That's an area for future optimization.
Change-Id: Idccf56fccd21ad0d3c2307eefee7bf35e350fec6
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447639
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
DPDK 19.05+ gives us an ability to pre or post-process
any single vhost-user message. The user can either perform
additional actions upon some generic events, or can
implement handling for brand new message types that
rte_vhost doesn't even know about.
In order to smoothly switch to the upstream rte_vhost
and drop our internal copy, we introduce an SPDK wrapper
function to register SPDK-specific message handlers. For
DPDK 19.05+ this will use the new rte_vhost API to
register those message handlers, and for older DPDKs
this function simply won't do anything - as w assume the
internal rte_copy already contains all the necessary
changes and does not need any "external" hooks.
For now we use the message handlers to stop the vhost
device and wait for any pending DMA ops before letting
rte_vhost to process the SET_MEM_TABLE message and unmap
the current shared memory.
Change-Id: Ic0fefa9174254627cb3fc0ed30ab1e54be4dd654
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446085
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Our internal rte_vhost lib requires SET_VRING_ADDR to
flush a pending SET_MEM_TABLE. On the other hand, the
upstream rte_vhost will invalidate the entire queue
upon receiving SET_VRING_ADDR message, so we mustn't
send it at runtime. Both behaviors are strictly
implementation specific, but this message isn't needed
by the spec, so send it only if vhost was compiled
with our internal lib.
Change-Id: I200b99a1dd5124bdebd104e69ae1b012a974ab6f
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446087
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Those will be reused by the vhost target and
its message handling hooks.
Change-Id: If41118e3700f3b445312bb691c493bd13134546b
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446084
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Make struct vhost_user_msg match the format defined in
the vhost-user spec. The custom additions were inhereted
from DPDK, but SPDK never made use of them. Also replace
direct sizeof(*msg) usages with a handy macro that was
already there. Finally add a VHOST_USER prefix to the
VHOST_MEMORY_MAX_NREGIONS #define.
Change-Id: Idef60fdc62a9e96f076059d60aad796fcc9d3e1c
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446083
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It's disabled by default, so no functionality is changed yet.
The intention is to use the upstream rte_vhost from DPDK,
which - starting from DPDK 19.05 - is finally capable of
running with storage device backends.
SPDK still requires a lot of changes in order to support
that upstream version, but the most fundamental change is
dropping vhost-nvme support. It'll remain usable only with
the internal rte_vhost copy and with the upstream rte_vhost
it simply won't be compiled. This allows us at least to
compile with that upstream rte_vhost, where we can pursue
adding the full integration.
Change-Id: Ic8bc5497c4d77bfef77c57f3d5a1f8681ffb6d1f
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446082
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Generate and insert DIF for write I/O by stream fashion in
spdk_iscsi_read_pdu().
Verify DIF for read I/O in spdk_iscsi_conn_write_pdu().
Verification can be done in spdk_iscsi_build_iovs(), but how many
writes to socket is not known beforehand, and same range may be
verified multiple times. So verify DIF before starting to write to
socket.
Change-Id: I860637758164b7d518c38fe92356562cbbe3d8f8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446406
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Add an new API spdk_dif_generate_stream() to insert DIF into
the metadata space of newly read data block by stream fashion.
This API is tested by replacing the previous DIF generation such
that DIF is generated once all data was read.
Change-Id: I757b4e6f10fe2d9d643f56ebb678c731cdad63bb
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446594
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
This patch leaves metadata space in data buffer for read or write I/O
to generate and verify DIF.
For write I/O,
- in spdk_iscsi_read_pdu(), leave metadata space for every block
by calling spdk_dif_set_md_interleave_iovs() and then
spdk_iscsi_conn_readv_data(), and remember this in PDU.
- in spdk_iscsi_op_scsi() and spdk_iscsi_op_data(), set not data
length but buffer length to length of an iovec. The reason is
that the actual data length sent to SCSI layer will be larger
than the data length set in PDU. SCSI task holds data length
as an independent member and this change doesn't loose any
information.
For read I/O, in spdk_iscsi_build_iovs(), leave metadata space for
every block by calling spdk_dif_set_md_interleave_iovs().
The reason why DIF context is saved in PDU is that DIF verification
will be done in spdk_iscsi_conn_write_pdu() and DIF context will be
used there first.
Change-Id: Iac5739211f26a91b00a4ecf2f306bbecec3d78dd
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446382
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Increase the size of write (data out) buffers and immediate
data buffers in the iSCSI library to store DIF. Increase is the
amount necessary to store 16 byte metadata block to the block
formatted iwth 512 + 16. 512 + 16 is the current maximum ratio
of metadata per block.
Use the macro SPDK_BDEV_BUF_SIZE_WITH_MD defined in
include/spdk/bdev.h for this purpose.
Besides, change the name of a helper function from
spdk_get_immediate_data_buffer_size() to
spdk_get_max_immediate_data_size() to differentiate the maximum
data size and the buffer size, and then to use the macro.
Change-Id: I626f8045ff706e1a6d79fa298261769bc96b7d8b
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447011
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Increase the size of small and large buffers in the bdev layer
to store DIF. Increase is the amount necessary to store 16 byte
metadata to the block formatted with 512 + 16. 512 + 16 is the
current maximum ratio of metadata per block.
This change will be done in the iSCSI library in the next patch
and other libraries may be done later.
Hence add and use an new macro SPDK_BDEV_BUF_SIZE_WITH_MD(x) for
convenience.
Change-Id: I4b5498f56c9baf3e3ed93dd1c757998d7ce65141
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/444558
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use new queue API to manage OCF queues dynamically
This change allows for dynamic creation and deletion of queues
on get_ and put_ io channel.
Qeueues no longer depend on number of cores in SPDK.
Queue-to-pollers mapping list is removed as well
as locks "q_ocf_lock" and "vbdev->_lock" as they became redundant
Change-Id: I5069e1f8535f505816184a333db876afb925ac44
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446841
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
According to the implementation of VPP, the vppcom_session_write() may
cannot write all provided buffer, and we shouldn't continue in this
case, just like usage of vppcom_session_read().
Change-Id: I419efc2812e3aa261a75ddbd3f7cfec60a5376d3
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447540
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We were only using one pd per device anywas, and this is necessary for
shared receive queue support.
Change-Id: I86668d5b7256277fe50836863408af2215b5adf9
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447385
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Unregister calls are not guarded. Fix this by chekcing status before
doing unregister.
Change-Id: I593e27efdae17f6d89362fd8e4edccf2af2b7281
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445894
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Retry mechanism will stuck if there is no outstanding
IO after completion with ENOMEM. This should never
happen.
Change-Id: I58ebf8cc8a498231beef43ac20f58eeaad89afda
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446610
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The calling of spdk_bdev_finish is in wrong place,
the bdev subsystem recycling will be called by
_spdk_subsystem_fini_next. If we call spdk_bdev_finish
here, it will be called twice, so it is unnecessary.
And this patch will be used to address the issue
reported in:
https://review.gerrithub.io/#/c/spdk/spdk/+/447613/
Change-Id: I03dff8b84bd0d7b49675ce8300b3da623963e140
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447731
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This was a result of a merge conflict with the recent 1fc4165 merge
which modified the ISA-L includes. We now need to use isa-l/include/x.h
format when including ISA-L files.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifa38db396152d2aa4279a0dade7d47a5b9a2ba60
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447493
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Both Mellanox and Soft-RoCE NICs work with this approach.
Change-Id: I7b05e54037761c4d5e58484e1c55934c47ac1ab9
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446134
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Persist through power loss feature is not supported for now.
Change-Id: Id2a5088389dc28b9d28d88c04ff819d20ea11902
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436940
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For number of registered controllers field in Reservation
Status Data Structure, we caculate all the controllers
in the subsystem which Host Identifier are same with
existing registrants.
Change-Id: Ib4de22c7020dbd8294f448f23c0c5c8c142629dd
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436939
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The possible issue could be following if you shutdown NVMe-oF target
with TCP transport as an example,
=================================================================
==61022==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 560 byte(s) in 1 object(s) allocated from:
#0 0x7ffff6efcfe0 in calloc (/lib64/libasan.so.3+0xc6fe0)
#1 0x4c6216 in spdk_nvmf_tcp_listen /home/ziyeyang/spdk/lib/nvmf/tcp.c:680
Indirect leak of 48 byte(s) in 1 object(s) allocated from:
#0 0x7ffff6efcfe0 in calloc (/lib64/libasan.so.3+0xc6fe0)
#1 0x4a77b8 in spdk_posix_sock_create /home/ziyeyang/spdk/lib/sock/posix/posix.c:291
After checking the issue, it seems that we did not call
spdk_nvmf_transport_stop_listen when removing the subsystem listener.
And this patch can solve this issue.
Change-Id: Ic75d99cb0c6a3ba1c47ac79a2d8e3887b0f6b012
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447020
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch extends existing ISA-L support for NVMe/SCSI T10 CRC-16
protection check (PI). The choice of which algorithm to use is set
via an existing configure parameter. The default for x86 systems with
appropriate CPU instructions is to us ISA-L.
Testing shows that PI checking/generation will run at device speed using
ISA-L. The table-based algorithm is much faster than the original algorithm
and is provided to speed up calculations on non-x86 systems.
This patch also fixes one issue in a false configure error if nasm
is at a higher version than currently checked (i.e. 2.13.03)
Local performance testing yeilds these results:
Original - 15 mbit/sec. (code removed)
Table - 400 mbit/sec. (27 times faster than original)
ISA-L - 3,400 mbit/sec. (227 times faster than original)
Signed-off-by: James Bergsten <jamesx.bergsten@intel.com>
Change-Id: Idc7f1d97252644d839621ffe9fa995edd922da52
Signed-off-by: James Bergsten <jamesx.bergsten@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/443646
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Functions moved in this patch may be used in future by
other NVMe based bdevs.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I975b61b7f78855e67d65ab7d9fd9f5dd859ac570
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/443753
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Renaming functions to make it clear they are not part
of the public API.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I9a283143a11090032b74684611403637bc6605a3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447056
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The reservation holder may release the reservation on
a namespace, release notification feature is supported
in comming patches.
Change-Id: If5d3158e691fcc782f7cf0b67a326bf62edf0531
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436938
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For API spdk_nvme_connect(), users can only use NULL or
struct spdk_nvme_ctrlr_opts for their own driver options,
so parameter opts_size doesn't take effect here. Since
some applications outside SPDK's git repository are using
such API, so we only remove the internal data structure
for now.
Change-Id: Ia727d2950d56abba637214ad17ecfa3eeab71d38
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445656
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Free the probe context after the controllers in the probe
context list become READY. Then users don't need to free
the context which is allocated by SPDK driver.
Change-Id: I2dcb76bacf26a401b5b559c4326764a4ddb97e83
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446820
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This isn't required anymore because spdk_subsystem_init
is now always called after an event has been executed, so it
always runs after the framework has initialized.
Change-Id: I05e1a4dd605f27247b6d43f5234173e07d9b9dd2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446996
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Just use a function pointer and a context.
Change-Id: I2d41ed2572d892f3328aadf7f22d8696816bf4d1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446995
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now that the boot strap event exists, this is not
necessary.
Change-Id: I277179fbc15ebe140fd22be1b67847cf23c6153e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446994
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It just takes a function pointer and a context instead.
Change-Id: Id8cdc968ddbc3776f60ad73e9aa09983ca03fa3f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446993
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Ths patch adds an API spdk_iscsi_get_dif_ctx().
When opcode of BHS is SCSI command, spdk_iscsi_get_dif_ctx() extracts
CDB and LUN ID from BHS. When opcode of BHS is Data Out or Data In,
spdk_iscsi_get_dif_ctx() extracts TTT and get R2T task corresponding
to TTT, and gets CDB and LUN ID from the task.
Then spdk_iscsi_get_dif_ctx() gets LUN by using LUN ID and calls
spdk_scsi_lun_get_dif_ctx().
Additionally spdk_iscsi_get_dif_ctx() checks the state of the connection
and the type of the session is valid before starting decode operation
because contents of PDU is not reliable when the state of the connection
is invalid. The necessity of the check was found by the Calsoft test tool.
Checks and test cases are not matched yet but copying existing checks
from spdk_iscsi_conn_execute, spdk_iscsi_op_scsi, and spdk_iscsi_op_data
will be enough. The check added for Data Out is not necessary for Data In
but it will not be harmful for Data In.
Change-Id: Iba09e0ac3e760aa1c5b582a120596c49b9e9d51e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446231
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch adds an API spdk_scsi_bdev_get_dif_ctx().
spdk_scsi_bdev_get_dif_ctx() decodes opcode in CDB, and if opcode
is read or write block commands, it gets LBA and use the lower
32bits of LBA as Reference Tag. It gets DIF information from
specified bdev next. Then it sets all to DIF context and return.
spdk_scsi_bdev_get_dif_ctx() is exported to iSCSI through
spdk_scsi_lun_get_dif_ctx().
Change-Id: Id8aac164c48e9e9d4ff7cfc9fa81bb5090f3e187
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446224
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Upcoming patches will store larger data in the data buffer than
iSCSI Initiator transfers, and size of metadata is not known until
asking to SCSI layer. This addition will be used to avoid overflow
in them.
Change-Id: I43e15d0cfbfddcf01342325b134d90e3d7dae038
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446378
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds spdk_iscsi_conn_readv_data() to read PDU data
from network socket by using spdk_sock_readv().
Additionally, this patch changes the existing spdk_iscsi_conn_read_data()
to call spdk_iscsi_conn_readv_data() by creating a single struct
iovec.
Change-Id: Ied487bb71bd4261ad53c9f3744ae272e65f98d7a
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446377
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add an new API spdk_sock_readv(sock, iov, iovcnt) to the sock
library. This will be used in SPDK iSCSI target first.
Implementation was done based on vcom_socket_readv in VPP.
Change-Id: I88a8f2af4856b1035165b78d76b4a4f4587b265d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446343
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is already done for JSON info dump. In addition, the
spdk_vhost_scsi_dev_get_tgt function might implement additional logic to
no return SCSI targets under removal process.
Change-Id: I21d6f660926091dfd34da553705116926f27b30d
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446910
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a check if the number of blocks of read I/O is not larger
than allowed. This is a preparation to the subsequent patches that
support DIF in NULL bdev.
Change-Id: I82d4c835788d2f347fd5fdef82e1def313dd49a1
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446052
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch adds an API spdk_dif_set_md_interleave_iovs().
This function is used to leave a space for metadata for each block
when the network socket reads data, or to make the network socket
ignore a space for metadata for each block when the network socket
writes data. This function removes the necessity of data copy in
the SPDK application during DIF insertion and strip.
Change-Id: I018efd77bdadcaec4679eea4dc1e404f155b0879
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446216
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK iSCSI and SCSI target don't expose any metadata and DIF settings
to the corresponding iSCSI and SCSI initiator.
Even when SPDK iSCSI and SCSI target allocate any bdev formatted
with DIF, SCSI commands sent from iSCSI and SCSI initiator don't
have any metadata and DIF information.
For that case, iSCSI target inserts and strips DIF on behalf of
iSCSI and SCSI initiator.
Hence SPDK SCSI target has to use data block size not including
metadata to process SCSI commands correctly.
This patch replaces spdk_bdev_get_block_size by
spdk_bdev_get_data_block_size in necessary places.
Change-Id: I264c8e532d1d1b016f6d8774c8ec03389528044f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445083
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
iSCSI target will need to get data block size except for metadata.
Other SPDK application may need to get the same information
future. Hence this patch adds an new API spdk_bdev_get_data_block_size
to bdev layer. In the header file, spdk_bdev_get_data_block_size
is located next to spdk_bdev_is_md_interleaved to avoid confusion
by new users.
Change-Id: I0fd2a6d0bcf6a4c18c583f70d96cc5035fc57fe9
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445082
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Unregistering by a host may cause a reservation held by the host
to be released. If a host is the last remaining reservation holder
or is the only reservation holder, then the reservation is released
when the host unregisters. This may occur with Acquire/preempt
and Register/unregister commands.
Change-Id: If59fe2fdaa69c8ad70f364618d6c281494ad6245
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446821
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A registrant can obtain a reservation on a namespace by executing
acquire command. Acquire command is associated with specific namespace.
For now only Acquire and Preempt reservation acquire action is
supported, Preempt And Abort will be supported in future.
Change-Id: Ifcbb6b414827393ffc266ceada5982b743716321
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436937
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reservations can be used by two or more hosts to coordinate
acccess to a shared namespace, host must register to a namespace
prior to establishing a reservation. Unregistering by a host
may cause a reservation release, this feature will be supported
after reservation acquire patch.
Change-Id: Id44aa1f82f30d9ecc5999a2a9a7c20b2af77774a
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436936
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Borrow the ideas from iSCSI and optimize
the nvme_tcp_build_iovecs function.
Change-Id: I19b165b5f6dc34b4bf655157170dec5c2ce3e19a
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446836
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
New API added for upper level to get controllers'
supported flags.
Change-Id: I51e9d0e57c355fa37f092602a94f4c08deb8898c
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446091
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Take a callback and an argument instead.
Change-Id: I9edda1a9bd506e12f309e52e520e97c0d705d6a2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446992
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Now that there is always one event to bootstrap,
we don't need an event here.
Change-Id: Ic87501461a608f5b15745a50b6e15f0f28aa55c2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446991
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
These can now be delayed. Next they'll be converted to thread
operations instead of events.
Change-Id: Id8c183621fb88594a9fd508eff064b4a1557a5b6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446989
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
- locks moved from ocf to adapter code,
- 'data object' renamed to 'volume',
- context and volume API reorganized.
Change-Id: Id4670ddfcb8eda9aefabc273497498c5bd3db1d5
Signed-off-by: Michal Mielewczyk <michal.mielewczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/444092
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Robert Bałdyga <r.baldyga@hackerion.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will make it easier to convert these operations to
spdk_thread_send_msg.
Change-Id: I4c975c22f3967a7197e69ccd230a14bdb97ba332
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446988
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The rest of the stuff is going to be converted to using threads,
but there must be one event at the beginning of time for
now.
Change-Id: Id4689d73e006ccf7bbe001732798e0ae78c603ac
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446987
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We never used this anywhere, and I need to move to a model where
the start up action is a thread message instead
Change-Id: I6b21ba9afb93a3245aceca2fe24713ffd16d0933
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446986
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will help keep the definition of that function fresh as things
change around it over time.
Change-Id: Id30864df132459a0ff889a725aa70abe072f3087
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446972
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Since the fuzz tester will be submitting random commands with random
memory addresses and such to the NVMe drives, we want to be especially
sure that we are using the IOMMU while running this test to prevent
memory corruption in the event that an errant command triggers a bad
DMA.
This function exposes to the application whether or not we are using the
IOMMU.
Change-Id: Ie4d26c706967a520967bfc81f72f7b581b792437
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446568
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Not all RDMA drivers fail back the dummy recv and send operations that
we send to them when destroying a qpair. We still need to free the
resources from these qpairs to avoid eating up all of the system memory
after multiple connect and disconnect events. Since we won't be getting
any more completions, the best heuristic we can use is waiting a long
time and then freeing the resources.
qpair_fini is only called from the proper polling thread so we can safely
call process_pending to flush the qpair before closing it out.
Change-Id: I61e6931d7316d1e78bad26657bb671aa451e29f4
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/443057
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
spdk_bdev_nvme_lookup_ctrlr can be replaced with existing
nvme_bdev_ctrlr_get_by_name function.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Id85243b13099b2976e1368e481201ccf27ce6ddb
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446437
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will make possible to make some NVMe bdev related
functionalities to be common for NVMe and FTL bdevs.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Iafc2acc3ac54deb762bc7205180f41d5befbb42b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/443552
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Bdev NVMe controller will be used in future by other
NVMe based bdevs, so let's move it to common layer.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ic485b556d622011b9e36fec1ce13394fc436bbd8
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446434
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
nvme_ctrlr structre will be moved to common files in next
patch, so let's change its name to more representative.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Id51c19437c2d4ba479407201b062266807156c0b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446248
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For now these are empty files, but there will be some
code in these files in following patches.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ie45d6d3314c424f9af84bb3b0eba00de45215db5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446247
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a beginning of series that will provide
common code for all NVMe based bdevs.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I097b4a03ef79277659f45d217c7e4e58236c98bf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445893
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We specify the --match-allocations rte init parameter
now, which gives us guarantees that memory will be
freed in the same units it was allocated.
Note that if user initialized DPDK separately from
SPDK, we aren't sure if --match-allocations was
specified, so will still mark the segments to not
be freed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I599747d4b917e91adfabf64c904cd7891a77b3cf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446459
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This function indicates whether DPDK was initialized
external to the SPDK env_dpdk library.
This can be used in cases where we need to implement
different behavior when DPDK is initialized outside
of SPDK - in that case certain flags that SPDK would
prefer may not have been specified. This will
be used in the next patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I58d285bd4d9cda96b108624d65dedbec32164cfe
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446458
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
io_types like FLUSH and RESET are not always supported
by base bdev modules. For example: virtio_blk bdev doesn't
support FLUSH; ocf or ftl vbdev doesn't support RESET.
Change-Id: I569ea75f8242c8bf082d7d89996ad1c7b1791570
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446493
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
FLUSH io_type shares a same process with UNMAP, except
that in the end, it calls spdk_bdev_flush_blocks function.
Change-Id: I4529bf29b7cd9f16d10f2edc99a20d25213c9c71
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446492
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For consistency, made similar change on WIP compress patch and
want to make sure the PT bdev module is as correct as possible to be
used as a template.
Change-Id: I9d2d775b7878edd16df3c283c169746fc821c8e5
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446456
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The operation to read data segment of PDU will be enhanced to
support DIF insert operation ofr write I/O.
This patch factors out check data segment length operation into a
function to make the enhancement easier.
Change-Id: I4fbc3bd440192b3723435c9acf3b6b46d3ce4939
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446342
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_iscsi_build_iovs() has the common pattern among segments, and
introduce a temporal context to factor out the common pattern into
a helper function. This will make subsequent patches easier to add
code about DIF strip in spdk_iscsi_build_iovs().
Change-Id: I307d8d0501910071b23a8c0d8eb5e19a4d1684c4
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446573
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Upcoming patches will support DIF insert and strip feature in
iSCSI target and the feature will be implemented by utilizing
iovecs.
Even when we support the DIF feature, we want to keep current
batched PDU flush, and current requirement that there must be
enough free iovecs to map all segments of a PDU is too strict.
This patch alleviates the requirement by passing remaining
number of iovecs to spdk_iscsi_build_iovs().
Change-Id: I6206322839c363e0ff5abe84bfd524bdc09e23ca
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446176
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
To know the mapped length by iovecs, pdu length was got first and
then the size of partial written was reduced separately.
This patch unifies these two operations into spdk_iscsi_build_iovs().
Change-Id: Ic6f5eecc902b8e209ef00c010915f476ca16c002
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446175
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Building iovecs had been done in spdk_iscsi_build_iovs() and
fast-forwarding iovecs for the partially written first PDU had
been done in-line separately.
This patch unifies these two operations into spdk_iscsi_build_iovs().
Fast-forwarding iovecs is necessary only for the first PDU, but the
operation is applied to all PDUs after this patch.
Extra overhead will be negligible because usually at most two
iovecs are consumed, one is for the base header segment and another
is for the data segment.
Change-Id: I8feafac6d280439eb7cf73136107adbac820ae09
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446174
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
iovec_cnt and iovec_array are very descriptive and good but iovcnt
and iovs are often seen in SPDK and will be enough.
Subsequent patches will add some changes on iovec operations and
simple and familiar names will be helpful to work and review them.
This patch doesn't change any behavior.
Change-Id: I89ff74809a0ddbb358e3fc8fdc353a47338cc3c5
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446173
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
This function add possibility to check if there are any scheduled operations
on particular thread.
Return from spdk_thread_poll() will be used as a way to load-balance and
signify if any work was performed during the single iteration.
A poller could return 0, but still be registered.
This helps especially in fio_plugin that only checked active_pollers or
messages via spdk_thread_poll().
Change-Id: Id6237278eb3b4bd4922b2abaa3c8ebd5e434d45d
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/445915
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This function add possibility to check if there are registered pollers
on particular thread.
Change-Id: I80af06a10c5c1b54fed5bb28a3aa769a52d8a206
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/446624
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The nsdata assignment is strangely aligned with some
variable declarations - fix it to make it more clear.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I43b1a6d5a69ca035a21f3996e8f859a45bd10b9c
Reviewed-on: https://review.gerrithub.io/c/446447
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
* Remove unneeded include files. Some of them belong in the .c file instead.
* Use create/delete_aio_bdev naming, removing aio_disk names
* Make some similar changes in the bdev_aio.c file for the associated ctx.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie325f4761f0419e9cc4e6556ab551fe606cd0d6c
Reviewed-on: https://review.gerrithub.io/c/446567
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This RPC was deprecated a couple of releases ago.
bdev modules now each have their own RPC for deleting
bdevs. Due to how bdevs are created differently on
different modules, it is simply not possible to
have one delete_bdev RPC that would work for all bdev
types.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia46c95dce6e35f7557e8d41c41b8fea382924547
Reviewed-on: https://review.gerrithub.io/c/442615
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We have conflict to handle the NVMf subsystem shut
down. The situation is that:
If there is shutdown request (e.g., ctrlr+c),
we may have subsystem finalization and subsystem
initialization conflict (e.g., have NVMf subsystem fini and
intialization together), we will have coredump
issue like #682.
If we interrupt the initialization of the subsystem,
following works should do:
1 Do not initilize the next subsystem.
2 Recycle the resources in each subsystem via the
spdk_subsystem_fini related function. And this patch will
do the general thing, but will not consider the detailed
interrupt policy in each subsystem.
Change-Id: I2438b4a2462acb05d8c8e06dfff3da3d388d4b70
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/446189
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Other io_type, like FLUSH, has a similar character with
UNMAP, that has a range description (offset and length),
but has no data payload. So the process for UNMAP io_type
can be extended to io_type like FLUSH.
Change-Id: I9467dfc3cc4fc1431b79359b0c477807ec138ac7
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/446491
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
In the error path, we were first decrementing a variable and then
asserting that it must be >0. These operations should occur in the
opposite order.
Change-Id: I6cec544faf17bb75cbfca3d3a3c173dc5db14f99
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/446440
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When the decision was made to uncouple the number of shared buffers from
the queue depth and allow the user to decide for themselves, the default
was also significantly lowered, which caused some issues when trying
torun performance tests (See https://github.com/spdk/spdk/issues/699).
While this is a user modifiable variable, it is still best to keep the
higher default value.
The original value was equivalent to max_queue_depth *
SPDK_NVMF_MAX_SGL_ENTRIES * 2 with the defaults for max_queue depth and
max_sgl_entries being 128 and 16 respectively. Hence 4096
fixes: 0b20f2e552
Change-Id: I809e97a10973093a2b485b85bca7160091166f70
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/446525
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Default 'unmap' option stays as it was.
'Write_zeroes' comes useful when one wants to make sure
that data presented from lvol bdevs on initial creation presents 0's.
'None' will be used for performance tests,
when whole device is preconditioned before creating lvol store.
Instead of performing preconditioning on each lvol bdev after its creation.
Change-Id: Ic5a5985e42a84f038a882bbe6f881624ae96242c
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442881
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
base_bdev_io_expected can be used for the situation
that IO requries multiple and uncertain number of
base bdevs.
Change-Id: I912400f839c02c95606bc94e7c8ad4946e90b6bf
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/446009
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This feature was added to DPDK by Jim to avoid the failures that can
come from splitting a buffer over memory regions in RDMA.
Change-Id: I13b646e22a4e2a4ccf915b0274061d31d02c03f7
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/446166
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since we already checked the core info in _spdk_subsystem_fini_next
function.
Change-Id: I6ab28d8fb11a7a07ae8c14c27357db236bf51b3e
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/446190
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: qun wan <qun.wan@intel.com>
If success is false in each bdev module's spdk_bdev_io_get_buf_cb,
call spdk_bdev_io_complete with SPDK_BDEV_IO_STATUS_FAILED, and
then return.
Change-Id: I6f106d8d39a3616f7305201fa2efc4805d4d00ee
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/446046
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Break out the failure handling code to a separate
function.
Change-Id: Ic530bb4d33c19edb62360e06afe3946b963445b1
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/446008
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
When the specified buffer size to spdk_bdev_io_get_buf() is greater
than the permitted maximum, spdk_bdev_io_get_buf() asserts simply and
doesn't call the specified callback function.
SPDK SCSI library doesn't allocate read buffer and specifies
expected read buffer size, and expects that it is allocated by
spdk_bdev_io_get_buf().
Bdev perf tool also doesn't allocate read buffer and specifies
expected read buffer size, and expects that it is allocated by
spdk_bdev_io_get_buf().
When we support DIF insert and strip in iSCSI target, the read
buffer size iSCSI initiator requests and the read buffer size iSCSI target
requests will become different.
Even after that, iSCSI initiator and iSCSI target will negotiate correctly
not to cause buffer overflow in spdk_bdev_io_get_buf(), but if iSCSI
initiator ignores the result of negotiation, iSCSI initiator can request
read buffer size larger than the permitted maximum, and can cause
failure in iSCSI target. This is very flagile and should be avoided.
This patch do the following
- Add the completion status of spdk_bdev_io_get_buf() to
spdk_bdev_io_get_buf_cb(),
- spdk_bdev_io_get_buf() calls spdk_bdev_io_get_buf_cb() by setting
success to false, and return.
- spdk_bdev_io_get_buf_cb() in each bdev module calls assert if success
is false.
Subsequent patches will process the case that success is false
in spdk_bdev_io_get_buf_cb().
Change-Id: I76429a86e18a69aa085a353ac94743296d270b82
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/446045
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
VMWare Workstation NVMe emulation does not seem to write the
SHST_COMPLETE bit within 10 seconds, resulting in an ERRLOG
during detach/shutdown. So add a quirk to cover these VMWare
SSDs. But rather than squashing the ERRLOG completely for
these SSDs, just add a message instead indicating this is
somewhat expected on these VMWare emulated SSDs.
Fixes issue #676.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3dfcb631feda639926fd712f1f41abb66cbf2096
Reviewed-on: https://review.gerrithub.io/c/445942
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Adapted our custom rte_vhost APIs to the upstream DPDK
version which has independently added similar APIs.
This will potentially allow us to remove our internal
rte_vhost copy.
rte_vhost_set_vhost_vring_last_idx() was renamed to
rte_vhost_set_vring_base() and the last vring indices
have to be acquired with a newly introduced rte_vhost_get_vring_base()
rather than rte_vhost_get_vhost_vring().
This is only a refactor, no functionality is changed.
Change-Id: I1ca2c1216635c117832c9d9c784d5661145c04cd
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/446081
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The elements and functions which are used for raid reset io,
can also be used for other potential raid IO requests which
need multiple base_bdev involved.
Change-Id: Ide7ea190fdbd29da9f9fa22862a0a7c162509697
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441308
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Make modyfication of global allocator index tread safe
by using atomic operation
This patch also changes mempool size to be 2^n - 1
which makes it more efficient
Change-Id: I5b7426f2feef31471d3a4e6c6d2c7f7474200d68
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442695
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Removing band from "free list" is moved from FTL_BAND_STATE_OPENING
to FTL_BAND_STATE_PREP state's change actions.
This will fix race condition when one band is prepared (erased)
and write pointer is trying to get next active band.
Change-Id: I9e4fe9482a01ee732271736e4a0e6fcedf2582d8
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/445118
Reviewed-by: Jakub Radtke <jakub.radtke@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
ENOMEM is expected when nvme_qpair will be out of resources.
In such a case ENOMEM shall be propagated to allow upper (bdev)
layer proper handling.
Change-Id: Ie647c2d3efff24a8de949a22ac42a31dfd0e78b7
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/445580
Reviewed-by: Jakub Radtke <jakub.radtke@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When an operation fails, we shouldn't pass a handle or
a 'valid' blob ID to the caller's completion function.
The caller *should* ignore it when bserrno != 0, but
it's best to not take that chance.
Fixes#685.
Note: #685 seems to have a broader issue related to
a possibly locked NVMe SSD in the submitter's system.
This only fixes the assert() that was hit.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3fb3368ccfe0580f0c505285d4b1e9aca797b6a6
Reviewed-on: https://review.gerrithub.io/c/445941
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
There are some cases that virtual bdev open and close
the device and QoS will be disabled at the last close.
In this case, when a new bdev open operation comes again,
the QoS needs to be enabled again.
Change-Id: I792e610f4592bad1cac55c6c55261d4946c6b3e2
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442953
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
SPDK ring size used for write buffer submission queue
must be increased if required number of batches is a
power of two.
Change-Id: I9b9f885064cf6f0f5fe94b0ed4f9d49a4e5c0cd0
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/445721
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For real PCIe drives, if we removed one drive, existing hotplug
monitor will trigger the remove callback twice, there is one
workaround for vfio-attached device hot remove detection which
will also trigger the hot removal callback. For now we add
the check in the bdev_nvme layer so that coredump will not happen.
Fix issue #606.
Change-Id: I0605fbdf391fed20c4aa9a2d54b4f059f29dc483
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/445642
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It seems like DPDK 19.02 has split the "session mempool"
into two separate mempools but this isn't really described
in the DPDK release notes, so this patch only makes our
crypto code behave just like DPDK crypto examples.
rte_cryptodev_queue_pair_setup() no longer accepts
a separate mempool parameter but instead requires it
to be passed through a new field in struct
rte_cryptodev_qp_conf, which is also passed as a param
to rte_cryptodev_queue_pair_setup(). It's referred to as
"session private mempool" instead of "session mempool",
which makes some sense since we already use
rte_cryptodev_sym_get_private_session_size() (with the
word "private" in name) to calculate its size.
The other mempool - "session mempool" - now has to be
allocated with rte_cryptodev_sym_session_pool_create()
instead of regular rte_mempool_create().
Change-Id: I3bc6185855988b864ca59bc1972beaf4f7ea8925
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443738
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
I think this simplifies the process a little bit.
Change-Id: Icc87a59c9f6fd965ef35531975b7036d85c4bc95
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/445916
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We were only using one value from this array to tell us if the qpair was
idle or not. Remove this array and all of the functions that are no
longer needed after it is removed.
This series is aimed at reverting
fdec444aa8 which has been tied to
performance decreases on master.
Change-Id: Ia3627c1abd15baee8b16d07e436923d222e17ffe
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/445336
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Since we no longer rely on the state queues for draining qpairs, we can
get rid of most of them. We cn keep just a few, and since we don't ever
remove arbitrary elements, we can use stailqs to perform those
operations. Operations on Stailqs carry about half the overhead as
operations on tailqs
Change-Id: I8f184e6269db853619a3581d387d97a795034798
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/445332
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Users should not access the internal probe context fields when
using the asynchronous probe API, so change spdk_nvme_probe_async()
to let it can only return the probe context pointer.
Change-Id: I0413c2d8db6cbe4539ad80919ed34dd621a9df70
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/445870
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Allow user to add seed value for guard compuation to DIF context.
This will avoid the guard being zero in case of all zero data.
NVMe controller doesn't support seed value for guard computation
explicitly, and hence if we want to use such a seed value in
NVMe controller, we have to format metadata more than 8 byte,
and add seed value into the reserved metadata field.
But some popular iSCSI/FC HBAs and SAS controllers have supported
seed value for guard computation, and so supporting seed value
in the SPDK DIF library is very helpful for some use cases.
Hence this patch makes the DIF library possible to specify seed
value for those use cases.
Change-Id: I7e9e87cb441bf263e64605c7820409fdc22dd977
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444334
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Older versions of QEMU (<= 2.11) expose the VGA BIOS
hole (0xA0000-0xBFFFF) by specifying two separate memory
regions - one before and one after the hole. This results
in the "size" not being a 2MB multiple. But the underlying
memory is still mmaped at a 2MB multiple - so that's what
we should be checking to ensure the memory is hugepage backed.
Fixes#673.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1644bb6d8a8fb1fd51a548ae7a17da061c18c669
Reviewed-on: https://review.gerrithub.io/c/445764
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_env_opts->env_context may now contain a DPDK-specific
string that will be appended directly into rte_eal_init().
It can be used to e.g. override the default EAL loglevel,
which was hardcoded to RTE_LOG_NOTICE so far.
This is primarily meant to be used during development.
As a test for this feature, the vtophys test app will now
set the highest possible EAL loglevel which will give us
a ton of additional debug logs.
Note: the opts->env_context field is implementation-specific
and hence the vtophys app needs to check if it's run with
our env_dpdk. As SPDK_CONFIG_ENV is a raw text not even
surrounded with quotation marks, the vtophys app needs to
do a bit of #define magic to make it a string.
Change-Id: I0b2196770e5b59a6c33d0170337c34f9f8b8466e
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/445111
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When we were trying to push a newly allocated string
into the arg array and the array realloc() failed,
the string we were about to insert was leaked.
Change-Id: I31ccd5a09956d5407b2938792ecc9b482b2419d1
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/445149
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch expose backend's bdev's PI setting to the corresponding
NVMe-oF Initiator by Ideintify command, and removes the check if
block size is 512 multiple.
These change enables NVMe-oF Initiator to send extended LBA payload.
Change-Id: Ia7aa8332d36f056872a515b6da90c83112edb909
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/445056
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Move req->submit_tick assignments from specific transports to generic
qpair code.
Check whether submit_tick has been assigned before doing the actual
assignment, because a request may be submitted several times and the
original submit_tick shouldn't be covered.
Change-Id: I2de8018dc21763eb5a19bb9d48dfbdef764b036e
Signed-off-by: lorneli <lorneli@163.com>
Reviewed-on: https://review.gerrithub.io/c/444702
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In iSCSI, SPDK_ISCSI_MAX_SEND_DATA_SEGMENT_LENGTH was an alias
of SPDK_BDEV_LARGE_BUF_MAX_SIZE.
iSCSI had used both interchangeably.
SPDK_BDEV_LARGE_BUF_MAX_SIZE means the buffer size of the large
buffer pool in generic bdev layer, and will be changed to be
configurable.
SPDK_ISCSI_MAX_SEND_DATA_SEGMENT_LENGTH had been used to negotiate
MaxRecvDataSegmentLength with iSCSI initiator and to split large
read data, but both are determined by not iSCSI target but generic
bdev layer.
Hence this patch replaces SPDK_ISCSI_MAX_SEND_DATA_SEGMENT_LENGTH
by SPDK_BDEV_LARGE_BUF_MAX_SIZE.
Change-Id: I822a5203a5092fe8b2d1ca3f93423f1acbfc782e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444539
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This macro constant is not related with data size and should be moved
to the separate location.
Change-Id: I73b337f5750c39d1f87591c2e372664019e50b95
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444545
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
If the current recv_state of qpair is same with the state to be set,
we will print error message. And checked the current code,
we should add a check to avoid this.
Change-Id: I49334f637c48e565e785d1fe6d0f000e18b2048a
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/445653
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a memory barrier for arm64 to prevent possible reordering
of tracker and cpl access,
because arm64 has less strict memory ordering behavior than x86.
Change-Id: I0a8716f7bfeffb0bbce27ee3174e214c8e4566b4
Signed-off-by: heyang <heyang18@huawei.com>
Reviewed-on: https://review.gerrithub.io/c/442964
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If users didn't set the "HotplugPollRate" field, the value
will be set to NVME_HOTPLUG_POLL_PERIOD_MAX, which isn't
aligned with our design purpose.
Change-Id: I9795d7a16a1cc44ed4de7c40f376c563d977b455
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/445077
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Purpose: solve the coredump issue for the buffer
return later in spdk_nvmf_tcp_request_free_buffers.
If keep this statement, we cannot return the buffer
to the polling group.
Change-Id: Ib5c95ba54b37540950e654110fe6317cab507076
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/445435
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
