Set nvme bdev physical block size based value of NPWG and NAWUPF namespace
field.
The logic to set bdev phys_blocklen is based on how Linux nvme block driver
sets it. If the underlying nvme namespace supports NPWG/NAWUPF then bdev
phys_blocklen is set to min(npwg, nawupf)
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Change-Id: I6d254a9e730dccc230b9db4d1217bf7ab2f39b6c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8224
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We will print a notice log if the drive can support SECURITY
SEND/RECEIVE commands but not OPAL, so remove the error logs.
Change-Id: Ib26aa727ad1e703d53c387af8507b920606ea9c6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8055
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
By the next patch, nvme_io_channel will be used as an I/O channel
to a single nvme_bdev. This channel is created to a single
nvme_bdev_ctrlr and has a corresponding I/O qpair. nvme_io_path
will be a better name especially when we support multipath.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic34162f3c383676c5249396a09173329fc6febce
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8095
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Previously only a single thread could submit abort commands for admin
commands and it was the thread of the corresponding controller.
When we support multipath, we need to traverse the list of controllers
to which the target admin command is submitted. Threads of controllers
may be different.
On the other hand, the previous implementation made the I/O flow very
clean, but the I/O flow will not be clean if there are many controllers
and the subsystem does not have its thread.
This patch changes the policy so that any SPDK thread can submit abort
commands for admin commands.
Then when multipath is supported, we will be able to traverse the
list of controllers simply on the current thread to abort either I/O
command or admin command.
We already are able to submit any admin command on any thread anytime
including abort command. Hence this will not cause any issue.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib69de33f2e84b03861c7d95ce060035bdb589e4b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8121
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
It is unlikely that managing namespaces by nvme_bdev is complicated.
Hence we do not need the helper function nvme_bdev_to_bdev_ns().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I77b4dcd12b2f2a219f58e5bc7b7e51dd10635da4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8118
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
We can hold bdev_io directly in nvme_bdev_ctrlr as an outstanding reset.
We can put spdk_bdev_io_from_ctx(bio) into a parameter for a few
functions because it is used only once in a function.
Passing not spdk_bdev_io but nvme_bdev_io to bdev_nvme_verify_pi_error()
remove unnecessary substitution.
This is a little more efficient and simplifies the implementation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If49ad9fa42abf27decf3afcd8c994f55faa3bc70
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8094
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Following Linux NVMe host, add UUID and EUI64 comparison to
bdev_nvme_compare_ns().
Besides, previously the return value of memcmp() had been used as
the return value of bdev_nvme_compare_ns() and this was wrong.
Fix it in this patch together.
Add unit test cases for bdev_nvme_compare_ns().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I069ab53e77741d6348b847d51e84a9338e2f3787
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7755
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
bdev_nvme_compare_ns() will be used to check if all namespaces of
one nvme_bdev are identical, and this is the convenient location.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3fa6072c1cceec53268e53bf398fa1e8f069035e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7169
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This will be helpful to simplify the following patches.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I66939f2953c66582bfcb79cfe187814280e89680
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7324
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When multipath is supported, a subsystem has multiple controllers and
bdev_nvme_create_cb() will create a channel per nvme_bdev_ctrlr by
iterating the list of nvme_bdev_ctrlrs, and will hold lock while
doing it.
If the code to access nvme_bdev_ctrlr is put in a place, the
following patches will be easier and smaller.
Hence reorder the code of bdev_nvme_create_cb() as a preparation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2f2e66758c3374c678cc44bbb0116f4611c6753a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7754
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Factor out spdk_bdev_io_complete() calls into a helper function
bdev_nvme_io_complete().
This simplifies the code a little and will be helpful for the following
patches to retry I/Os. These are not performance critical but we
specify inline explicitly by following bdev_nvme_io_complete_nvme_status().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9fafacfd8571c037c3bc34382c251317309da334
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7497
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
Factor out spdk_bdev_io_complete_nvme_status() calls into a helper
function bdev_nvme_io_complete_nvme_status().
This simplifies the code a little and will be helpful for the following
patches to retry I/Os. Specify inline explicitly to avoid performance
regression.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1ac451486e1c6a4401842490411e986fac191d59
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7484
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
bdev_nvme_submit_request() calls spdk_bdev_io_complete() with failed
if bdev_nvme_reset() returns negated rc other than -ENOMEM.
So let bdev_nvme_submit_request() process it.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2569634ff0f18fb433cb685de1366e43abf5a9fe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7524
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is called only in a place. Inlining this into bdev_nvme_submit_request()
will simplify the following patches by removing unnecessary cast.
Besides, use -ENXIO if I/O path is not found. This will be better than -1.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib6c38f89db1c1e651941aad18d31dd0891f380de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7871
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
I/Os will be retried if spdk_bdev_io_complete() is called with
SPDK_BDEV_IO_STATUS_FAILED. To do it easier, consolidate exit paths
of bdev_nvme_get_buf_cb().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0a67b88a107d616c5a5b0fc5ff963ad1402f5651
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7487
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
We cannot rely on DSM/DEALLOCATE as a write zeroes
alternative, even if DLFEAT reports that deallocated
blocks will be read as all zeroes. DEALLOCATE is
advisory, meaning that blocks may not actually be
deallocated. In cases where they are not deallocated,
they will not be read back later as zeroes.
QEMU 6.0 started reporting DLFEAT as returning zeroes
for deallocated blocks but for some of our write
zeroes tests, blocks aren't actually deallocated.
We may be able to add quirks in the future if we know
that a controller reliably deallocates blocks, but
for now we need to revert this completely.
Note that since bdev/nvme module now does not support
write zeroes in any cases, we need to disable the
write zeroes call in the unit tests.
Fixes issue #1932.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I79f0673774b621a9ffcc46891728cc7719e34cdb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7723
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Factor out the operation to get ctrlr pointer to submit an admin
command into a helper function bdev_nvme_find_admin_path().
This will make the following changes transparent.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idabfa5874ad95414f24d414702205b0cdbc98ddb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7105
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
reset_io is stored into nvme_bdev_ctrlr->reset_bio now. Hence we can
merge completing reset_io into _bdev_nvme_reset_complete() easily.
i
As a few minor changes, to reduce the size of the following patches,
clear reset_bio before calling spdk_bdev_io_complete(), and call
spdk_bdev_io_complete() after completing ctrlr reset.
The following patches will retry pending reset_ios if reset is internal,
abort reset_ios if reset is external and fails, or succeed reset_ios
if reset is external and succeeds.
This clean-up will be helpful for such enhancement.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5e0b4e04b19f4f4f3b21b2db4dc6a2b948b29c67
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7241
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
nvme_bdev_ctrlr->reset_bio is accessed only by the thread which called
spdk_for_each_channel() and the callback to spdk_for_each_channel()
is called after unwinding stack via message.
Hence bdev_nvme_reset() can call _bdev_nvme_reset() rather than
_bdev_nvme_reset_start() and store bio into nvme_bdev_ctrlr->reset_bio
after _bdev_nvme_reset() returns zero.
Then inline _bdev_nvme_reset_start() into _bdev_nvme_reset() because
_bdev_nvme_reset_start() has only a single caller now.
The following patches will introduce subsystem and bdev_nvme_reset()
will reset all controllers of a subsystem sequentially. These further
clean-ups will be helpful for such enhancement.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I25abaa5be511c967ce20c92e4caa7dfeb3e09dd1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7240
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These are not performance critical and we can get the current thread
simply by spdk_get_thread().
This change will make the following changes a little simpler.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ide79b1275ec0122f7f9812fe53c08a83d0aafeda
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7162
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
As said in the previous patches, nvme_ns->ref is 2 at most, and
first is for populating namespace and second is for nvme_bdev.
On the other hand, nvme_ns->populated is for populating namespace
and nvme_ns->bdev is for nvme_bdev.
Preparation was done by the preceding patches. Let's remove nvme_ns->ref
and use nvme_ns->populated and nvme_ns->bdev instead.
We have unit tests for both normal case and shutdown case now.
So regression will be avoided.
These changes will be helpful for the following patches to support
multipath.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I279ca21a41d6ee2c07bbbeb62866e28423fcc6d0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7097
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Merge setting nvme_ns->populated to false into
nvme_ctrlr_depopulate_namespace_done(). This will simplify the
further changes.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4bb8347b085ec5855690f6dbde243269cedee706
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7136
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
A few patches including this patch will remove nvme_ns->ref by
nvme_ns->populated and nvme_ns->bdev and remove nvme_ns->ref.
In this patch, set nvme_ns->populated to true when nvme_ns->ref is
incremented, i.e., nvme_ns is available. nvme_ctrlr_populate_namespace_done()
clears nvme_ns->populated if creating bdev failed by memset().
And add assert to nvme_ctrlr_depopulate_namespace_done() to ensure
nvme_ns->populated is false when nvme_ctrlr_depopulated_namespace_done()
is called.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I536933abb516c0a29231149ab564dc8b84245b10
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7096
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The nvme_ns->ref was added to nvme_bdev_ns to support both multipath
and OCSSD range. OCSSD range was to split a namespace into multiple
partitions.
However, OCSSD range was not used and removed to simplify multipath.
When namespace is not split, nvme_ns->ref is 2 at the maximum. First is
for populating namespace and second is for nvme_bdev. nvme_ns->populated
is for populating namespace and nvme_ns->bdev is for nvme_bdev.
Hence we can use nvme_ns->populated and nvme_ns->bdev directly instead of
nvme_ns->ref.
A few patches from this remove nvme_ns->ref and use nvme_ns->populated
and nvme_ns->bdev instead.
dThis patch inlines nvme_bdev_ns_detach() into the callers and remove it.
The following patches will adjust the locations to update nvme_ns->populated
and nvme_ns->bdev and then remove nvme_ns->ref.
Removing nvme_ns->ref will be helpful to associate multiple namespaces
into a single nvme_bdev for multipath.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I87581d39769681adc5e1fdf0b33680e31d958e47
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7095
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Moving nvme_ctrlr_depopulate_namespace_done() to common.c removes the
stub from bdev_ocssd_ut.c and will simplify the upcoming changes.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia94a88ca77518c7df08b52aa9298cdea5997ca1e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7135
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
nvme_bdev_ns_to_bdev() was introduced because nvme_ns->bdev may be
removed to support multipath. However, it is unlikely now.
Hence it is easier to read to stop using nvme_bdev_ns_to_bdev() and
access nvme_ns->bdev directly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iaf35455218761bafd03060a21110ad1c4098b1db
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7098
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Factor out deleting secondary trid from bdev_nvme_delete() into a
helper function bdev_nvme_delete_secondary_trid().
This will make the following changes simpler.
Besides, fix a typo, the case should be not 1B but 2B.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iba21efa0d8036ed15d2743a2548df05e866089d6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7123
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This change separates failover case more clearly, and will make
the following changes simpler.
Merge spdk_nvme_detach() and populate_namespaces_cb() into
bdev_nvme_add_secondary_trid(). Then change the return type of
bdev_nvme_add_secondary_trid() to void and move the comment to the
head of it.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0eb706728cf1b9ad7031eb66e11880a47e2ba767
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7044
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Clean up bdev_nvme_add_trid() by factoring out comparison of namespaces
and comparison of trids into helper functions, bdev_nvme_compare_namespaces()
and bdev_nvme_compare_trids(), respectively.
Then rename bdev_nvme_add_trid() by bdev_nvme_add_secondary_trid().
Rename is for clarification and clean-up is for the next patch.
The next patch will merge spdk_nvme_detach() and populate_namespaces_cb()
into the renamed bdev_nvme_secondary_trid(). Clean-up makes the
next patch simpler.
One note is that checking if the type of trid is not PCIe is done
by holding mutex now to prioritize clean up.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idc8652329dd2c721d101a724ec1a57a66c4174a7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7094
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The following changes will require nvme_bdev_ctrlr_create() to be
asynchronous. As a preparation, merge nvme_ctrlr_populate_namespaces()
and populate_namespaces_cb() into nvme_bdev_ctrlr_create().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I623f927da072d746b4bd83314c0f5bcb9cc34ef0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7043
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will reduce the size of the following patches.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I81d7c90d8676a42aff3ffe73932d5612642a4114
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7042
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Factor out the operation to destroy qpair into a helper function
bdev_nvme_destroy_qpair().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5ac9215407e0b4f4368a68bc58d8e3daac029393
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6783
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Pass nvme_bdev_ctrlr to callback to each spdk_for_each_channel() call
in reset processing.
The following patches will register nvme_bdev_subsystem instead of
nvme_bdev_ctrlr as io_device. Hence we need a different way to pass
nvme_bdev_ctrlr to the completion functions of spdk_for_each_channel().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ief31dbbc145b5850e4e5b2e4c9ad7287128ce870
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6950
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Hold the bdev_io which submits the reset request into the nvme_bdev_ctrlr.
as reset_bio. Then differentiate the callback function between
_bdev_nvme_complete_pending_resets() and _bdev_nvme_abort_pending_resets()
to spdk_for_each_channel() in _bdev_nvme_reset_complete().
The next patch will pass nvme_bdev_ctrlr to for_each_channel() instead.
The following patches will register nvme_bdev_subsystem instead of
nvme_bdev_ctrlr as io_device. Hence we need a different way to pass
nvme_bdev_ctrlr to the completion functions of spdk_for_each_channel().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If7a3386815429e8ed44f4e9e5365a21bd97e7fb6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6913
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The API spdk_nvme_ctrlr_free_io_qpair() returns immediately if the
passed qpair is NULL, but calling spdk_nvme_ctrlr_free_io_qpair()
with NULL should be avoided.
This patch cleans up the code to ensure that nvme_ch->qpair is NULL if
disconnected and spdk_nvme_ctrlr_free_io_qpair() is called only if
nvme_ch->qpair is not NULL.
Then add a test scenario that two reset requests were submitted
simultaneously and the first reset request failed and then the second
reset request also failed. This verifies the refactoring done in the
next patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iae461f7f826b0e1a4607a17e528c04a642242d6e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7041
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add support for zoned namespaces in the bdev/nvme module.
Query the namespace type, and if a zoned namespace is found, set the
bdev struct members needed by the bdev_zone.h APIs.
Note that while vbdev_zone_block and bdev_ocssd have zone locks,
bdev/nvme does not need any kind of zone lock, because NVMe ZNS
supports append natively.
The whole point of the zone append command is that you don't need any
locks, even when having multiple writers, since the drive will return
back the Assigned LBA where the blocks were actually written.
If a SPDK application will utilize writes instead of zone appends,
the SPDK application itself will need a per zone lock in order to
make sure that there is only one outstanding write.
Adding zone locks in bdev/nvme would reduce the performance of zone
appends, for no reason at all.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ibacdb9b6e839624aba869c9949231343db5914be
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6911
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add a check and only free g_hotplug_probe_ctx once.
This is to fix below issue:
https://github.com/spdk/spdk/issues/1849
Change-Id: I7387495890830badd06a7341d9ac4d149ca1c9f4
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7002
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
This patch really uses the accelrated engine.
Currently, we only offload the crc32c caculation,
but it can be extended.
Change-Id: If0e4c6a44b6e1e10e03f7eca355bed418d67326b
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6760
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Separate bdev_nvme_reset() and _bdev_nvme_reset() by making
bdev_nvme_reset() call _bdev_nvme_reset_start(), and then
remove the ctx parameter from _bdev_nvme_reset().
This clarifies the next patch and reduces the size of the next patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I76b0f2f5b83445845a313203e594dca0be150bc3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6949
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We need to pass bio only when the reset request came from the upper
layer. Previously, bdev_nvme_reset() called _bdev_nvme_reset() and
_bdev_nvme_reset() had the second parameter, ctx, to pass bio to
for_each_channel(). However, it was not clean.
Let's separate bdev_nvme_reset() which processes a reset request
came from the upper layer and _bdev_nvme_reset() which proesses
an internal reset request by adding a helper function
_bdev_nvme_reset_start().
The next patch will remove the second parameter, ctx, from
_bdev_nvme_reset() for clarification and further refactorings.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2bd00e3abb56fe8d540b8af55743ee92ca9cd526
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6948
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The recent refactoring removed the destruct poller and change the
reset processing to destruct ctrlr after its completion by conditionally
sending message.
But differentiating callback function is difficult if we reset multiple
ctrlrs.
If nvme_bdev_ctrlr->destruct is set, any new reset cannot start. So we can
use an new variable and always execute the callback function.
Add an new variable pending_destruct to struct nvme_bdev_ctrlr, and set
pending_destruct if ctrlr->ref is zero and ctrlr->destruct is true, and
then start destruct ctrlr if ctrlr->destruct_after_reset is set after
clearing pending resets.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9f34c42a40c5a5da54611e7871aef8c58117a56a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6714
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Purpose: To setup an accelerated function callback
for created spdk_nvme_poll_group. In this patch,
we just create the interface. The real usage of this
call back will be provided in the other patch.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I0d936aa4eba4dbfcc0137942156b9f2919eb5b78
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6758
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Previously, not nvme_bdev_ctrlr but spdk_nvme_ctrlr pointer had been
passed to spdk_get_io_channel() in nvme_rpc_io_cmd_bdev_nvme().
There was no unit test for bdev_nvme_get_io_qpair(), and so add
unit test for it to guard us from degradation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I00fdc14ea6467162c5fb90d04389883d7c409a17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6920
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add mutex per nvme_bdev_ctrlr and replace g_bdev_nvme_mutex by it
for possible cases. These are just drop-in-replacement.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib1d5eebd65e514cfe96ad60a9004d9bace7b4f6b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6693
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
