The nvme_transport_ctrlr_scan() may return failure while there are
multiple controllers, so the probe context's init_ctrlrs list may
not null for this case, so when free the probe context, let's ensure
there is no controller in the init_ctrlrs list. Also added a UT to
cover this case.
Fix issue #1095.
Change-Id: I4d9a10ad73cf00bbe159edd1f5b919797333feb6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476969
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch allows to send IO requests from external module to the nvme
device.
External module should call nvme_io_msg_ctrlr_start() to start IO message
producer on the controller and enable sending messages.
nvme_io_msg_send() is used to send IO to NVMe driver thread context,
where passed function will be called. Allowing the external module to
issue IO as needed.
NVMe driver users should poll spdk_nvme_io_msg_process() to move forward,
sending IO from external module and process their completions.
Change-Id: Ie59abac69870c4e4daa50120c747f3b620395921
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471386
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These will form the base of a little state machine for managing the nvme
qpair structure.
Change-Id: If6f6df38cc17221ac8fcb7d8c0d7e2e808897a99
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470534
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The driver has historically waited until we have to do a listen
before enabling the admin qpair. That is a very PCIe-centric mindset.
For fabric controllers, a lot of the early initialization operations such
as get_cc and set_cc are handled through the admin qpair so it should be
enabled before we begin the initialization process.
As a side effect of this cahnge, the internal API
nvme_ctrlr_enable_admin_qpair has been removed. It would have turned
into a one-liner.
Change-Id: Icd162657d01a85c227a3f20c295d0208e07ce44d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471743
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
If we are to have multiple reconnect attempts, we have to control
whetehr the controller is placed in the failed state from outside the
reset function itself. This will allow us to fail the controller only
after all of our retries are exhausted.
Change-Id: Ia82e10325272f25b2b8527336dc3bc507c93b401
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469932
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Detected by scanbuild, but it's actually a programming
error. It could make the failed test segfault instead
of cleanly printing the total number of failures.
Change-Id: I12f4bc2b1ccd2034251c1840381875d51708c6fb
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462871
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: I305914637ce6ad5d95cce9eb2cf4049e67969a1c
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459561
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There's no need to set this every time we allocate
a request.
While here, fix a typo near where we needed to modify
the unit test to remove the qpair assertion.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8af41a6c483415950f625d1ed2ef46088b75a622
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456270
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add the unit test of the public function nvme_request_check_timeout().
Change-Id: I6b51cc3985b1dd306fa85f3aee2be847e90d8807
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453781
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Also use the same style condition check for secondary process
with PCIE type.
Change-Id: I93c83126145255887914ef5efea1a493c8f7f767
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/444492
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Existing NVMe driver uses a global list g_nvme_init_ctrlrs
to track the controllers during initialization, and internal
function will start each controller in the list one by one
until the list is empty. We introduce a probe context
and move the global list into the context, with the context
we can enable asynchronous probe API in the next patch, also
this can enable parallel probe feature.
Change-Id: I538537abe8c1a4a82fb168ca8055de42caa6e4f9
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/426304
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previously, function spdk_nvme_probe_internal() will probe
NVMe controllers and then bring up probed controllers
into the ready state after that. Broke up original two parts
with probe and start stage, this will help us to introduce
a probe context in the next patch.
Change-Id: Ie0c55a6a5463fb437f84349b0b2b33a217ba63e0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/426303
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Added -ffunction-sections / --gc-sections to allow the linker to remove
unused functions when linking test executables. This reduces the number
of required mock definitions to those actually required by tested code.
Change-Id: I22725ce82e22675a7c2d28c8227e586f2cd65023
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/436319
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In cases we probe without a specific trid, the underlying
rte_bus_probe() in spdk_pci_enumerate() might fail to
initialize some devices, but still return with code 0,
That's technically correct, as we asked just to probe
devices on the bus and that's what it did. Some devices might
have been initialized, others not. In secondary process we
blindly assumed all devices were probed successfully, which
might have eventually led to assert failures, as current
process was not on the ctrlr->active_procs list.
To fix it, just add an additional check before attaching
the controller in secondary process.
Change-Id: If015b1e562052a9189ed1a48091b209bd2dd5f2a
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/431727
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Normally, there will be only one separator in transport id,
for example, either ':' or '='. But the users may input
this: trtype=PCIe traddr=0000:81:00.0.
Thus, there will be two diffrent separator '=' and ':',
and our function doest not handle this case correctly.
And this patch can fix this issue, and also update the
test case.
Change-Id: Ic3f10dc1e37c66647fede37c5cf9523fc2652677
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/428307
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Currently in the function nvme_ctrlr_start() the initialization
process is executed as a whole, in the case there are many controllers
in one system, which means other controllers must call the function
one by one. While here, we add several states here, which can
help refactoring the initialization process.
Change-Id: I209cf964bbf6e151823a7ecdc6a3f6e6e69df297
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/424157
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The type of malloc used in some of the NVMe functions changed and has
re-introduced some scan-build failures.
Change-Id: I2055260c256429a1a2c6404a6d87605807d4170e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/424573
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Unify the regular mocks and the pointer mocks. Simplify
several of the #defines.
Change-Id: Ica8c69dbb70a685a55b5961b73fd7872f451c305
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/418884
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Static analyzers don't see CU_ASSERT_FATAL as truly fatal,
and will complain that code later in the function may try
to dereference a NULL pointer. So we added SPDK_CU_ASSERT_FATAL
which should be used instead.
This still trips people up sometimes though - the static analyzer
complains and then the developer will add other checks that
pointers are not NULL.
So instead, forbid use of CU_ASSERT_FATAL through check_format.sh
and explain why. While here, fix up all of the existing CU_ASSERT_FATAL
usages to either CU_ASSERT or SPDK_CU_ASSERT_FATAL.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7974c8c85ddb89ed1b7d882db3a2eb0882ea0217
Reviewed-on: https://review.gerrithub.io/418111
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Rather than storing nvme_payload::type explicitly, use the SGL reset
function pointer as an indicator: if reset_sgl_fn is non-NULL, then the
payload is an SGL type; otherwise it is a contiguous buffer type.
This eliminates the one-byte type member from struct nvme_payload,
making it an even 32 bytes instead of 33, allowing the removal of the
awkward packing inside struct nvme_request.
Change-Id: If2a32437a23fe14eb5287e096ac060067296f1dd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/413175
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The definitions of these macros will change in an upcoming patch that
modifies the way nvme_payload is laid out.
Change-Id: Ic6edc18928542b07be7519a72bdbf6babbeb0131
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/413174
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will simplify upcoming patches that change the way nvme_payload
stores its type.
Change-Id: Idf0a5b8dfd7d66a10f89254d2c5c54fee2968a43
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/413173
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Factor out the common pattern of waiting for an internally-submitted
command to complete. This will give us a convenient central place to
add error checking.
Change-Id: I65334d654d294cfb208fc86d16fa387ac5432254
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/412545
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is an internal NVMe driver function, so we don't need to allow for
the case where trid is NULL. All callers already passed an address of a
local variable except the unit tests, which can be trivially fixed.
Fixes a static analyzer warning about trid being dereferenced in
nvme_transport_ctrlr_construct() before being checked for NULL in the
caller.
Change-Id: I2bfeb5c92a302093b7c7f2949adcd18baa11855a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/408395
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This file is accessed by files in multiple directories under test.
Change-Id: I634481fb58eab5c097aaece5289f88e531954fcb
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/404976
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is the first of a long line of patches which will
reduce Makefile rule duplication in all of our SPDK
unit tests.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1cd6e9e1e9cabab0a15dbcb901e4db782d73b1a4
Reviewed-on: https://review.gerrithub.io/399716
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add the unit tests for the spdk_nvme_connect() API. This API
will be called both by the primary or standalone process and
secondary process. Introduce different unit tests to cover
different usage.
Change-Id: I9ded7d08b593c5e2c541cf6faad6aff0ff2ebff9
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/380895
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Only multi-process shared controllers should be inserted into the shared
list in g_spdk_nvme_driver. To accomplish this, create a second
per-process global list of attached controllers (g_nvme_attached_ctrlrs)
and rename the driver struct field to shared_attached_ctrlrs to clarify
its purpose. Additionally, a new helper function, nvme_ctrlr_shared(),
returns whether a given controller should be on the shared or
per-process list.
Change-Id: I46d4e558ece8b7fc3d28868e32bb56d794f21aab
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389190
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Each process should manage its own list of controllers that are
initializing; the list doesn't need to be shared between processes.
This is the first step toward preventing non-PCI controllers from being
added into the shared attached_ctrlrs list.
Change-Id: Ia6f85fe89e28a04f0950da5362bb2f49d1b76da9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/388695
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use the env abstraction PCI functions to compare PCI addresses so that
details like whether or not domain is specified or whether 0-padding is
present don't affect the comparison.
For example, 0000:01:00.0 should compare equal to 01:00.0.
Change-Id: I9f3aaeb5f8fdbf3e246e31a41b4c09151288015e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/387202
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ia0ef86c281af8abeb311b4f15512ab5762f99095
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382724
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: I1ec1ac16a2a49aa352c48c70408d5a8683972869
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382510
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
With this new API, callers can attach one specific ctrlr identified by
the transport ID directly along with optional ctrlr opts. If connecting
to multiple controllers, it is still suggested to use spdk_nvme_probe()
and filter the requested controllers with the probe callback.
Two primary use cases:
1) connecting to the NVMe-oF discovery controller
2) more straightforward way to connect a specific controller (avoiding
the probe callback)
A typical usage of this API with specific ctrlr_opts:
1. struct spdk_nvme_ctrlr_opts user_opts = {}
2. Call spdk_nvme_ctrlr_get_default_ctrlr_opts(&user_opts, sizeof(user_opts))
3. Modify the content of the initialized user_opts with user required value like
user_opts.num_io_queues = 8
4. Call spdk_nvme_connect(&trid, &user_opts, sizeof(user_opts))
Change-Id: Idf67ee5966f6753918c12604342c892d2f3bbe3a
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/370634
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This change is relating to add a new public API spdk_nvme_connect() under
include/spdk/nvme.h. This new spdk_nvme_connect() API will connect the user
specified trid and have a user optional ctlr opts. Rename this API and make
it as public.
A typical usage of this API as following:
1. struct spdk_nvme_ctrlr_opts user_opts = {}
2. Call spdk_nvme_ctrlr_get_default_ctrlr_opts(&user_opts, sizeof(user_opts))
3. Modify the content of the initialized user_opts with user required value like
user_opts.num_io_queues = 8
4. Call spdk_nvme_connect(&trid, &user_opts, sizeof(user_opts))
Change-Id: Ideec8247365ebf7dd15069e29821be8ea27b08be
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/380849
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add a new parameter for the default ctrlr opts initialization.
This is to make sure future compatibility when SPDK components
are built as a shared library. User's version and SPDK's version
may be in different size.
The change here is to make sure the backward compatibility when
new fields are added in the struct spdk_nvme_ctrlr_opts.
Change-Id: Icfc9640993cb06063b825d4df5835d920dd374e5
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/380846
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8662806c462a47ec389c96c5a233cce48cc11944
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/372554
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make sure the global spdk_memzone_lookup mock variable is set back to
NULL rather than pointing at dummy, which is a local variable.
Change-Id: I2c2d478fb5fd8cbb96983d7005e788cd88fe642f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376684
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Make sure that req returned from the request allocation functions isn't
NULL before starting to check its fields.
Change-Id: I21869834148200f4bfd5065ebbc874041c559599
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375618
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Icfd37861ececa4568a377f3312d879797d7d5c8a
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/372552
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I1d62e34deed873446a9a87f16188b5c8ed21aea5
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/372551
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
