Operations to queue iSCSI tasks are in iscsi.c and conn.c and cross
references due to this separation makes us difficult to create unit
tests.
This and subsequent patches will try to disentangle cross references
by moving some functions from iscsi.c to conn.c.
This patch moves spdk_iscsi_conn_handle_queued_datain_tasks() from
iscsi.c to conn.c. For unit tests, we don't add anything new in
this patch and just create necessary simple stubs. After code
movement, new unit tests will be added.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If5b8501a1ef7ea53682a3437c7eb2375aa52ee3b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477416
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Subsequent patches will move a few functions which call
iscsi_queue_task() from iscsi.c to conn.c. This patch is a
preparation to it.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id136b5d3bf76a9894162115dd0d57d997178c869
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477415
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The macro DMIN32/64() are local in iscsi.c. Replace them by the
generic macro spdk_min() will improve the portability.
Replace it in test/unit/lib/iscsi/conn.c/conn_ut.c together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5f6992b3dc091cd748b4e138810fb01761a1ab24
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477202
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is a preparation to replace the private macro DMIN32/64() to the
generic macro spdk_min(). The corresponding input variables of
struct spdk_scsi_task are uint32_t, and so uint32_t are usable.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Icbf8ba1dfa0b170635a2852e6f0e9d841da9741b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477201
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_iscsi_send_nopin() is called only in a single place of conn.c.
So change it to private in conn.c. Additionally, iscsi_conn_send_nopin()
may be a little more meaningful and rename to it.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1fe70e0468e1dd43468492b8b3d359c094130ed7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477190
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_iscsi_is_deferred_free_pdu() is called only in a single
place of conn.c. So change it to private in conn.c. Additionally,
iscsi_is_free_pdu()_deferred() may be a little more meaningful
and rename to it.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic1e3d7ff435c454f40e81f9a4f90fe76589ec7b2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477189
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We changed read I/O submission to stop splitting when detecting LUN
hotplug very recently. We can do the same refinement for read I/O
abortion.
In _iscsi_conn_abort_queued_datain_task(), set all remaining length
to the new task and complete it immediately. We keep the code to
process the case that queued_datain_task completed but is still in
queue, but we can change its if condition to assert.
Simplify the corresponding unit tests accordingly, and set
task->scsi.transfer_len in abort_queued_datain_tasks_test() to
exercise the changed paths.
In iscsi_pdu_payload_po_scsi_read(), if task->scsi.transfer_len is not
larger than SPDK_BDEV_LARGE_BUF_MAX_SIZE, no minimum calculation is
necessary and we can substitute task->scsi.transfer_len to
task->scsi.length simply. This change is too small to be an independent
patch and is done together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iea93e51b103eae141a007a0abdaf13cbe6d5287f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476984
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
In iSCSI library, macro MATCH_DIGEST_WORD() and MAKE_DIGEST_WORD()
have been used instead of match_digest_word() and make_digest_word().
The latter has not been used for a long time. Hence remove them.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0fdb5c24a120a08fe06f825ee5e6c24ba64c0edf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476416
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This log has been observed often after recent refinements but
this log does not mean any error. So use SPDK_DEBUGLOG instead
of SPDK_ERRLOG here.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3aa39ab3773ae83586c99699fd2473ca02c35eb9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475182
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch series orders login related functions top down in iscsi.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I23ea7101030c6d2d3fbccba878bdf77d89b814cf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476415
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch series orders login related functions top down in iscsi.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I39431b213216b1e4e677f80de8c14c40dd7da150
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476414
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch series orders login related functions top down in iscsi.c.
Other than code movement, fix a typo.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib55fe86295f47c1c86bb99d5e3a6862f508bfcfa
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476413
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch series orders login related functions top down in iscsi.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I82fe06e3488a1c623c5fc875cf797790ee4ea48f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476412
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch series orders login related functions top down in iscsi.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2f7dd681ca430c810dac6fcea122f84a142152d7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476411
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch series orders login related functions top down in iscsi.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8e123177124b4526e9bbe9001293c6f668b9c3bb
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476410
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
conn->data_out_cnt does not control anything now but adding assert
for conn->data_out_cnt will be helpful at least to ensure that the
current SPDK works correctly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I31ee90769ce0555e64bd41c283e8b437326efebf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476409
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
When a iSCSI write is large and split, if LUN is removed between
creating and submitting the last subtask, spdk_clear_all_transfer_task()
completes the primary task and then process_non_read_task_completion()
tries to complete the primary task.
This is the double free case, and the later have to be skipped.
We add a flag is_r2t_active to struct spdk_iscsi_task and use it to
check the duplication. We may be able to use primary's initiator task tag
(ITT) instead but we can not rely on ITT because it is set by the initiator.
We clear is_r2t_active even when primary is removed from
conn->queued_r2t_tasks but it will be no harm.
Fixes the issue #1064.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia6511bd7adaa8fcb9a07bc40d498e8ee0b7a7ccf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475044
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The type of pdu deferred to be free only have
two types, R2T or DATA_IN. And the two types of pdus
are all assoicated a task, so updateing both the code and unit test case.
Also for all pdu free, we should use spdk_iscsi_conn_free function since
for normal pdu free, we all use this function.
PS: I also tested the calsoft local, it does not trigger the assert.
Fixes#1074.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0524965baf5349a100210ef717aedaa5f8ff105e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475657
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This revert commit 6e4e85dcef.
Causing intermittent build pool failures. We had different operations
in remove_acked_pdu() and _iscsi_conn_free_tasks(). The patch tried
to unify them but was wrong. The operation in removed_acked_pdu()
was correct. This patch restores it. The next patch will fix the
operation in _iscsi_conn_free_tasks().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia398fd295769b786ba4777cc9f7df6e134f15e48
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475791
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Purpose: Simply the code, doing data_cnt_in every where
will make the code diffcult to maintain. If we put the
management in iscsi task get and free related function, then
the code will be easy to be read and easy to maintain.
Change-Id: Ib9af067326630657877a94afc2eb0db28f5d5fd1
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/474914
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Purpose: Do not let the primary task do the I/O if it is
splitted into subtasks. This will make the code simplier,
when all the sub I/Os are finished, we can free the
primary task.
Update the corresponding unit test also.
As a result of this change, when read I/O is split into subtasks,
the primary task uses only some of its data. Hence separate
iscsi_pdu_payload_op_scsi_read() into split and non-split
case explicitly.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I9bbe4b8dd92a2996f35ad810b33676e34670c77e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473532
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
After recent refinement of LUN hotplug, it is possible that
for large write I/O, primary task is freed doubly as a github issue
is reported.
However we could not notice the case because spdk_del_transfer_task()
had not return success/failure, and to make matters worse,
the second call of TAILQ_REMOVE() to the same header and instance
caused no error if the first call succeeded.
This patch changes spdk_del_transfer_task() to return success/failure.
Besides, the next after patch expects the stub of spdk_del_transfer_task()
returns true in the unit test, and hence do that.
The next after patch will fix the issue of double free of primary task
by using this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibc0b65723050362d5fafa913417b64393feb874e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475042
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
By the recent refactoring, SCSI task is configured when getting
DIF context from SCSI layer. Passing not CDB and offset separately
but SCSI task to SCSI layer is more concise and do in this patch.
In iscsi_send_datain(), we have to update task->scsi.offset for the
case that data is split into a sequence, but the update is no harm
because task has completed what it must to do.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I153352dfa7aa7325db4452f03d863df11b3e0cfa
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472510
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
We have separated PDU header handler and payload handler, and have
PDU header handlers for each PDU type now.
By using this refinement, we can remove an aggregated helper function
spdk_iscsi_get_dif_ctx() and embed spdk_scsi_lun_get_dif_ctx() into
each PDU header handler.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib4d9939b625858466224647c545cb67a04babf86
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471699
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
During testing, we observed both conn->data_in_cnt went negative or was
left positive unexpectedly. Hence add assert to detect both cases.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I102d4eb7c8beb0e56b6a46fd0f85b3eb1c447da5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/474437
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We had not decremented conn->data_in_cnt when the primary is removed
from conn->queued_datain_tasks after submitting it.
If we simply add decrement into iscsi_conn_free_tasks() and
_iscsi_conn_remove_lun(), it conflicts with iscsi_transfer_in().
By recent refinements, primary is freed in either spdk_iscsi_conn_free_pdu()
or iscsi_conn_free_tasks()/_iscsi_conn_remove_lun().
Hence let's make decrement of conn->data_in_cnt for primary follow
the management of primary.
In iscsi_conn_free_tasks()/_iscsi_conn_remove_lun(), if
primary->current_datain_offset, conn->data_in_cnt is incremented, and
hence decrement it.
In spdk_iscsi_conn_free_pdu(), if primary and all subtasks are
completed, decrement conn->data_in_cnt.
This patch will fix the issue that conn->data_in_cnt ls still
positive even after all tasks are freed when removing LUN dynamically.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I70cb431ab968387749ff7a5c77cd109904687797
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/474436
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
We had checked LUN again but we had not checked primary task
in iscsi_pdu_payload_op_data(). This had caused unexpected behavior
during LUN hotplug. Hence we check if primary task exists again
in iscsi_pdu_payload_op_data(), and abort the subtask immediately
if not.
This change fixes one of the failures we observed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5315badf0b90902e77dd5270dd0eda1437a771da
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/474440
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Due to recent refinement of primary/secondary task management,
remove_acked_pdu() cannot use spdk_iscsi_conn_free_pdu(). As done
in iscsi_conn_free_tasks(), we can replace spdk_iscsi_conn_free_pdu()
by spdk_iscsi_task_put() and spdk_put_pdu() and we do that in this
patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9f83569becfc6e9440fb859709f04b6123674f25
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/474438
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In spdk_iscsi_conn_handle_queued_datain_tasks(), we had overwritten
task->scsi.lun. However, if the primary task is already submitted,
it cannot process IO completion correctly because task->scsi.lun is
NULL. This patch fixes the issue.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia63f4c2e37b43477eaccbfd6dfea28fa357bde12
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473627
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Data segment length of the PDU is already cached in pdu->data_segment_len.
Hence additional caching to the local variable data_len is not necessary.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1e596999640229b1b0fa85cbdb342b1636af5076
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471879
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Based on the following description in Chapter 4.3 "iSCSI Session Types in
iSCSI specification
b) Discovery session - a session only opened for target discovery.
The target MUST ONLY accept Text Requests with the SendTargets
key and a Logout Request with reason "close the session". All
other requests MUST be rejected.
update the comment slightly, add macro constants for iSCSI logout
reason, and change the ordering of checks to be session type and then
logout reason.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifc2ecc5b6dde546700662d3cda59d8cc465fd83a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472672
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
conn->sess->session_type must be accessed when conn->sess is not NULL.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3d41443352b65ee5ef4cc1f0d152b9e3221975c9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471877
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Previously iSCSI task was created after allocating data buffer
and reading all data, and hence creating iSCSI task and processing
iSCSI task were not separated.
However, the recent refactoring separate PDU header handling and
PDU payload handling, and then inserted allocating data buffer and
reading data segment in the middle.
If any critical error occurs during allocating data buffer or
reading data segment, PDU payload handling is not done, and hence
created iSCSI task is left in PDU receive process.
If any critical error occurs, the current connection starts exiting
and there is no way to continue PDU receive process.
The task left in PDU receive process is never freed, and hence
LUN hotplug or exiting connection never complete.
This patch do the following:
- Consolidate freeing pre-allocated PDU to spdk_iscsi_conn_destruct()
because this is the only path to exit connection.
- Abort SCSI task of the task left in PDU receive process if found
when freeing pre-allocated PDU. If the task is not SCSI or Data Out,
remove it simply.
Fix issues #1018.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8a2464c446c43bf4cfb5afbc0cd78b5bdef7d080
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472896
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Recent patches refactored iSCSI target to separate PDU header
and payload handling. However for SCSI Data-Out PDU, the division
of roles done by refactoring was wrong. Before refactoring, LUN
hotplug was checked after sending R2T, but after refactoring LUN
hotplug is checked before sending R2T. This change stopped PDU
exchange between iSCSI initiator and target and caused timeout of
LUN removal.
This patch restores the original ordering of checking LUN hotplug
and sending R2T by changing the division of roles.
SCSI Write Command PDU handling don't have any issue related with
this.
Fixes#1004
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7b2866d8394b522fb5420d2936de2fbddc7d1daa
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472308
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To use zero copy bdev I/O APIs for write I/O, we have to allocate
iSCSI task before allocating data buffer because allocating data
buffer will be changed to spdk_bdev_zcopy_start() call and the
allocated iSCSI task will be passed to the call.
One critical change is that we have to read all data for the
current PDU even if handling the PDU is rejected. For that purpose,
use is_rejected flag and do not call iscsi_pdu_payload_handle()
is is_rejected is true. If iscsi_pdu_hdr_handle() returns negative,
close the connection, so return the state machine immediately.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ice77b7266af8ac392d9094478523e6e6fe6d131a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470413
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Insert _pdu_payload_ into iscsi_op_login(), iscsi_op_text(),
iscsi_op_scsi_read(), iscsi_op_scsi_write(), iscsi_op_scsi(),
iscsi_op_nopout(), and iscsi_op_data() to clarify that they
handle PDU payload.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id28ea90948118321c7889084149083bcc6bbd27c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471562
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Extract PDU header handling from PDU payload handling for all PDU
types, and then group them into a new function iscsi_pdu_hdr_handle().
Then the original iscsi_execute() is renamed to iscsi_pdu_payload_handle().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1fb1937cfaf502797f2c4edb3aeeb97d4697c7d4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471015
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To use zero copy bdev I/O APIs, we have to allocate iSCSI task
before allocating data buffer.
Hence we separate PDU header and payload handling for SCSI Data-Out,
and include iSCSI task allocation into PDU header handling.
Factor out PDU header handling in iscsi_op_data() into iscsi_pdu_hdr_op_data().
spdk_nvmf_tcp_h2c_data_hdr_handle() and spdk_nvmf_tcp_h2c_data_payload_handle()
in lib/nvmf/tcp.c are used as a reference implementation.
Use pdu->task to pass the task allocated by iscsi_pdu_hdr_op_data() into
iscsi_op_data().
In iscsi_op_data(), if it sees pdu->is_rejected is true or pdu->task
is NULL, do nothing. Besides, check LUN hot plug again to separate
PDU header handling and PDU payload handling.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5074e945254081960744577e4ed8e0170793e5e0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470291
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Rename iscsi_op_snack() to iscsi_pdu_hdr_op_snack() because SNACK
Request PDU has only header and doesn't have PDU payload handling.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4d236c7963588729c32566e2be80db899edd2828
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471012
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Rename iscsi_op_logout() to iscsi_pdu_hdr_op_logout() because
Logout Request PDU has only header and doesn't have PDU payload
handling.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id788e5da56ee51b311cff2ec448c5cf0492ace13
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471009
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Rename iscsi_op_task() to iscsi_pdu_hdr_op_task() because Task
Management Request PDU has only header and doesn't have PDU
payload handling.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I66f842aecd2c1031a6bb0be4921e0f16930117aa
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471010
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
As same as SCSI Command Request and SCSI Data-Out, separate PDU
header handling and payload handling into different functions.
In iscsi_op_nopout(), if it sees pdu->is_rejected is true, do nothing.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If50cd64bacf18c014e2aa232fd84357b877d9821
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471011
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Separate PDU header and payload handling for Login Request PDU.
This will clarify the header handling and payload handling.
Especially store the allocated and initialized response PDU to
the current connection and refer it later. This idea is as same as
iSCSI task and will work because login processing is synchronous
and only once per connection.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7e0eb413ee5f759724a685b83a742515a3546780
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471472
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
cid had been got in iscsi_op_login_rsp_init() but it was not
intuitive. Get cid in iscsi_op_login() and pass it simply to
iscsi_op_login_phase_none().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ief7b865784aa72f7872b6e4a98809dbab49807de
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471471
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use rsp_pdu->data_buf_len in iscsi_op_login_rsp_handle() and its
calling functions.
This makes the code a little clearer.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I89aa7155e97c1b770b333f7f12e84e13811af953
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471470
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use rsp_pdu->data_buf_len in iscsi_op_login_phase_none() and its
calling functions.
This makes the code a little clearer.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id9c1f01bdfa95e8a2e9f6512777341334cb621e0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471469
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A local variable alloc_len had been used to hold the data buffer
length of the response PDU. But it's more intuitive to use
rsp_pdu->data_buf_len instead.
The subsequent two patches will replace related functions accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I48f96a542d6c177ba1d8409ff0230fa61c11e154
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471468
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Including getting incoming login parameters into iscsi_op_login_rsp_init()
was not so intuitive.
Initializing login response done in iscsi_op_login_rsp_init() can be
done before reading data segment but getting incoming login parameters
can be done only after reading data segment.
As a preparation to separate PDU header and payload handling for
Login Request PDU, extract getting incoming login parameters from
iscsi_op_login_rsp_init() into an new function
iscsi_op_login_store_incoming_params().
Besides, refine a few pointer and return code handling to make the
code a little clearer.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6b677bf6e93b830e6e6fead24c8b78d9d9bc1df4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471467
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Previously, pdu->data_segment_len had been set after reading all
data segment to the allocate data buffer pdu->data_bur together with
pdu->data and pdu->data_from_mempool.
But we don't have any ordering constraint to do that and the value of
pdu->data_segment_len has been fixed when reading all PDU BHS.
Hence move setting pdu->data_segment_len up to immediately after
reading PDU Basic Header Segment to pdu->bhs in iscsi_read_pdu().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If6f690623687ee974c5a1d73814e8675bb7077c8
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471852
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Fix static analyzer error by ensuring 4 * total_ahs_len is
not larger than ISCSI_AHS_LEN.
When ./configure -enable-werror --enable-ubsan --enable-asan,
iscsi target reports heap-buffer-overflow error
when I feeding unexpeted pdu opcode.
Change-Id: Ib8053e1a19b5e49385642106eb79c458d35ab3c6
Signed-off-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471489
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Liang Yan <liang.z.yan@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
