Change-Id: Ia382110fbbadea51d3b454e07e775afc9e286eae
Fixes: c5cd53cce0 ("Support for Commands Supported and Effects Log Page")
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/405821
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I93a4cae46dad7ec42fd82fa4917fd27e3b14c46a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/405827
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Some places use NULL to check for mmap failure but mmap return
MAP_FAILED in this case.
Change-Id: I4796fa52421da53c94223a9e8cc26ac04968f1d8
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/405648
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
There is a call to spdk_bdev_close () during spdk_bdev_part_base_free
(). This will trigger spdk_bdev_module-> module_fini () if this is the
last descriptor to the last bdev. In module_fini () resource might be
freed. But then, after spdk_bdev_close(), call to base_free_fn () is
done which may try to free the same resource again.
To avoid this, call spdk_bdev_module_finish_iter () after
_spdk_bdev_finish_unregister_bdevs_iter () return.
Change-Id: Ia6eb210504d121772221da18651a90ffc89dbbc4
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/405322
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
SPKD base bdev might be part of multiple vbdevs. The same is true in
reverse direction. So consider folowing scenario:
bdev3 bdev4 bdev5
| | |
+-+--+ + +--+--+
/ \ | / \
bdev0 bdev1 bdev2
In current implementation bdev0/1/2 will apear as base base for
bdev3/4/5 which is obviously wrong.
This patch try to address this issue.
Change-Id: Ic99c13c8656ceb597aba7e41ccb2fa8090b4f13b
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/405104
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This isn't possible to implement using the current public API of DPDK,
and all of the in-tree users have been removed. Replace the
implementation with a stub that always returns NULL and mark it
deprecated so that any users have a release to update their code.
Change-Id: I4bc71f0a9fd518923484e862333b0c5e86883980
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/405710
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows us to remove most uses of spdk_pci_get_device(), which looks
up a PCI device structure from an arbitrary PCI address. This function
is problematic, since it uses internal DPDK data structures that aren't
meant to be part of the public API. There is still one use in the
codebase, which will be cleaned up in another patch.
Change-Id: Ia1fe1f799c240195f6871c1d92821074f884c4e6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/405707
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Listing them through get_bdevs is not enough. Some
devices might not have any LUNs presented while expecting
some to be hotplugged in the future.
```
$ rpc.py get_virtio_scsi_devs
[
{
"virtio": {
"vq_count": 18,
"type": "user",
"socket": "/tmp/vhost.0",
"vq_size": 512
},
"name": "VirtioScsi0"
}
]
```
Change-Id: I56857d7a0637300beba39a8d83a98447f1f74ce7
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/405182
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is required for DPDK's single file segments.
Without this flag, mempools are likely to fail to
create. We don't necesarrily depend on physical
contiguity anywhere in SPDK and a quick NVMe+UIO
perf test shows no performance regressions.
Change-Id: I6b36b66bedfc99ee491663b5f2d21e079de12c44
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/403594
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If those are encountered, SPDK will get physical
addreses by itself (either IOVAs from vfio or
real physical addreses from /proc/self/pagemap).
Change-Id: I321892f7dfb26054087a86cd24502efff05883ea
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/404138
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This makes use of the `--single-file-segments` DPDK param.
Change-Id: I21ddd955841748ea087c0d006875514be56f2107
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/401112
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove configuration of an error vbdev at the removal of the vbdev.
This will lose the strict compatibility but the next patch will make
possible for us to add the removed config dynamically.
This patch will make the implementation cleaner and will not lose
any usability.
Change-Id: Idea7767ab5424427f912c82c66ff7d59d28108ab
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403915
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Our implementation of WritableFile::Allocate() was wrapped in #ifdef
ROCKSDB_FALLOCATE_PRESENT, which is set based on whether the target
system supports fallocate(); SPDK doesn't use the kernel filesystem
interface, so using that check makes no sense.
The #ifdef was also incorrectly wrapping WritableFile::RangeSync() and
WritableFile::GetUniqueId(), which are totally unrelated to fallocate.
Change-Id: I9655074353f79cf7a63e3e3d9c455cd39a683062
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/405332
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
All of the uses of this member variable treat it as uint64_t.
Change-Id: Iba9cf2eae1f2bd79617e2785ad498526f1115c10
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/405331
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Make sure spdk_fs_open_file() succeeds in all of the RocksDB environment
file constructors. NewSequentialFile() already checked this, but
SpdkRandomAccessFile and SpdkWritableFile did not.
Change-Id: Ie298e0cd29366eb698a0358740310fec62af7f9c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/405326
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Some error paths before _spdk_bs_alloc did not
destroy bs_dev.
After succesfull _spdk_bs_alloc, destroying is done
in _spdk_bs_free.
Change-Id: Ib69ae9707e12a646af80f7892af49cc4f79c199e
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/405223
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Blobstore supports only block lengths that are less than
SPDK_BS_PAGE_SIZE or when multiplication of block len
results in SPDK_BS_PAGE_SIZE.
This was checked only on spdk_bs_init(), but not spdk_bs_load().
When not checked, it caused issues with lvol store tasting.
During tasting, there is an attempt to perform spdk_bs_load()
on a given device.
It was possible to hit asserts in blobstore by creating
malloc with block size 8192.
Change-Id: I30b62bebad405b581eb2158925884adc616d9b92
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/404537
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The malloc and null bdevs generate a random UUID if it is not specified
in the construct RPC method; save the current UUID in save_config so we
can reproduce it in load_config.
Change-Id: Iabaa96fa3129189ae6acf3635345b98f71255fbd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/405110
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function retrieves the UUID from a namespace, if available.
Change-Id: I98c55375948b92eaf429b41fb36dfea4e2b780a2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/404734
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Convert nvme_ctrlr_cmd_identify_controller() and
nvme_ctrlr_cmd_identify_namespace() into a single function,
nvme_ctrlr_cmd_identify(), with generic parameters that should be
suitable for all current callers as well as future users.
These functions were internal-only, so there is no public API change.
Change-Id: I3dbb3e6b00308b67ba1f161f8a6b11b6333fca57
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/404733
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also, device removal is now always deferred to simplify
the locking.
Change-Id: I6b994531630b64860da728a93a0f2d613d8aa5ba
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/405181
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Each device was being removed from the tailq twice.
virtio_scsi_dev_remove does the removal by itself.
Change-Id: I2320fc88ac60ddd5952b07b26c679c8f2e887976
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/405180
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
g_virtio_driver contained just a list of all
Virtio-SCSI devices. It's now being removed for
two reasons:
* it's backend-specific, doesn't fit a generic virtio lib
* it's difficult to ensure thread-safety for it
Virtio bdev modules will now manage their Virtio
devices by themselves. Virtio-SCSI has now an internal
device list. (And VirtioBlk module maps devices to
bdevs 1:1, so doesn't need any additional work here.)
Change-Id: I3bc68d76d6904df5c56f00fca7ab387871ecf88f
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/405179
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This just moves some code around in preparation for an upcoming patch -
no functional change.
Change-Id: Ib1584fcf65d1be2063766588a79c434ad5fef716
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/404032
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is not needed - we can easily get the number
of clusters from the underlying blob.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I94a716731bd1b8c4b333fe295bd5a963928b4330
Reviewed-on: https://review.gerrithub.io/404615
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is always just the number of clusters in the
underlying blob. The length xattr was set but never
retrieved later so it's obviously not needed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8ccb93498ab322247209242b0faf733a90cd4307
Reviewed-on: https://review.gerrithub.io/404614
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Upcoming patches will make spdk_blob_resize() asynchronous
to allow for resizing while I/O is in progress. During
blob creation, it is not possible for I/O to be in progress,
so just use the internal _spdk_blob_resize which will
remain synchronous and called only after I/O is frozen.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I02128612a5f1bcd8bb236da113b05e88aa52c310
Reviewed-on: https://review.gerrithub.io/404613
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This internal function then will match noun/verb order
of the public spdk_blob_resize function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0d49af6502438b3571eebe5c87abe96a8fb77658
Reviewed-on: https://review.gerrithub.io/404612
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Write information needed to recreate each bdev.
Change-Id: I3d2b24fd4aaa8b98ec558d864cc28b55a899452f
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/401217
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Support the virtio RO flag, so that read-only devices
will successfully initialize now. Also do not allow
issuing any writes on a read-only device, so we don't
flood it with requests that are to fail.
Change-Id: I6b77f2338e4478a9abf2d5286344f6412d79284c
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/393461
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This fixes a double free in spdk_app_fini().
If spdk_app_start() failed, the g_spdk_app.config
was becoming a dangling pointer which would be
accessed and freed by spdk_app_fini()
Change-Id: Ifa833f5706d391356df39db4e1c538db7a1c7dcb
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/404358
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Set Features - Asynchronous Event Configuration has reserved bits in the
CDW11 value, which we shouldn't allow the host to set. Explicitly set
them to 0 in the Set Features handler to avoid propagating them to the
Get Features return value.
Change-Id: I73ed87d6d310e585c073b1db3b875147b4727007
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403902
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Most Get Features commands can be handled by just setting CDW0 to a
particular value and returning success.
Get Features - Host Identifier needs special handling, so it isn't
converted.
Change-Id: I8a3e2d5659a9ecbb3904589912ccf44d0d25b715
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403901
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
No functionality change, just a cleanup. This will help with future
simplification patches.
Change-Id: Id2efd851ed0add664e516725ab98b5e1f8cafff5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403900
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This uses libiscsi to implement an iSCSI initiator bdev
module for SPDK. Still a lots of work to do on this - posting
it in case anyone is interested in working on this further.
A number of todo items are listed in a README in the lib/bdev/iscsi
directory.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Change-Id: I060e33de0cd6796246789bf0e1bb4f2df59d8f71
Reviewed-on: https://review.gerrithub.io/390313
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Example showing the basics of a vbdev via a module that implements
the main functions, and a few extras, needed for a vbdev. The tests
also demonstrate how to configure an application to use a vbdev and
an underlying bdev
Change-Id: I67bf542143eb6532465cdb6af63c0f2ab7084c0e
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/399768
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A new optional parameter is added to the NVMe-oF target namespace
options to set the Namespace UUID, which will be reported via the
Identify command Namespace Identification Descriptor list.
Change-Id: I53c6d6fa6475d3395d412d196b42000715e9ed81
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/400894
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Previously when operation for blobstore was spanning multiple
clusters, it was split into multiple operation processed in a batch.
This made it possible to max out channel ops when using large enough
operation. It was encountered when issuing unmap for whole device.
Now single large operation is processed sequentially, making
it take at most one ops from channel.
Fixes#251Fixes#250
Change-Id: I132309877ba3b2d7217332daf1025fb5f9ee74d0
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/403306
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The unregister callback is only invoked after all I/O channels related
to the I/O device have been freed. The last I/O channel to be freed
might be on a thread different than the thread where spdk_io_device_unregister
was called. If this is the case, send an event to the latter thread
so that the callback gets called on the same thread as spdk_io_device_unregister.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3c910198fbd83eae95e5c57d618284e64db46ff7
Reviewed-on: https://review.gerrithub.io/404414
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We must keep the lock held after removing the io_ch from the thread
before iterating the list of threads to check for other channels
referencing this thread. Without it, it is possible for two different
threads to think they are the last thread holding a reference to
an unregistered device, and both will call the unregister_cb and free
the dev memory.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifcc18752937731722fefc6e2161ee41443c4fb86
Reviewed-on: https://review.gerrithub.io/404410
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Patch 583a24a4 [1] moved io_outstanding field to the
bdev_module_channel as it was needed there. This patch
re-adds another io_outstanding field to the bdev_channel.
We *do* want to count outstanding I/O for particular bdevs
- mostly for debug purposes.
[1] 583a24a4 ("bdev: share nomem_io data between bdevs built on the
same device")
Change-Id: I723e72c36447f9f778f88fc1769619676cbbaf71
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/396871
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The version of ittnotify_static.c shipped with VTune Amplifier XE 2017
triggers the new GCC 7 -Wimplicit-fallthrough warning.
Change-Id: I8a43beddf464853407639742b1eb89bcac39136d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/404211
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Simplify the handling of I/O completions that need to be sent as a
message so that they are handled in a single place in
_spdk_bdev_io_complete().
Change-Id: Ic94354ad947d0f1f11241f728aa194a105ff96c4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/404184
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Flip the status != NOMEM check around so that the logic is easier to
follow.
Change-Id: I607e8b5f0cfaa3598a623d0fc3642b11bd42decd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/404175
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
vbdev_error_init holds config information and examine() uses it.
This patch is necessary to keep compatibility from the .INI config
file to the upcoming JSON config file (based on JSON-RPC).
Change-Id: I1601b7e0dad5f93662177c59536776afd974ff07
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403913
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The static variable g_connections_per_lcore can be configured by
.INI config file. However it had not been added in the iSCSI options
because it was not iSCSI global parameter.
This patch is necessary for JSON config file to configure it.
Change-Id: I12aa1d94dd467969a6853b9fb3f8a627d0d70766
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403623
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now that the NVMe-oF target emulated controller supports Identify with
CNS = 03h (Namespace Identification Descriptor list), I believe we
support all of the mandatory parts of NVMe 1.3, so let's increase the
reported VS/VER fields to 1.3.
Change-Id: Iee1052bf9ee1a0954f47770c7e5151886e63f11c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403891
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A few places were accidentally storing namespace IDs in uint16_t.
Change-Id: Iae9d709fb20bc1ac0a584ccd9683b721ce5de961
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403886
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Move the commonly-accessed fields to the front so they end up in the
same cache line where possible.
Also tweak the types of type, status, error.nvme.sct, error.nvme.sc,
error.scsi.sc, and error.scsi.sk (they can fit in 8 bits), and move the
Write Zeroes splitting variables into u.bdev.
This reduces sizeof(struct spdk_bdev_io) from 272 to 224, in addition to
the better cache line usage.
Change-Id: I4a91fd07f252e7add4a2db179df9c53268672198
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/404053
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Re-word confusing comment in spdk_iscsi_read_pdu() and
simplify a return path in spdk_iscsi_handle_status_snack().
Change-Id: I15bd8b2f45d0e45cf4a4a34533ecb8af0a154531
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/404034
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Its possible for a net_framework to have initialization and finish
functions. This patch adds mechanism to register spdk_net_framework
and executes appropriate functions during subsystem start/finish.
Change-Id: I06d9cb6e98f843794296b833caa3c79735f06f12
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/403703
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id370631770cb2e090c3efbe95cd86db4f6168c5e
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/403702
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The sock abstraction wraps these functions now, so the iSCSI layer
doesn't need to include them directly.
Change-Id: I900ed96a9cfb5d12c7fd190bc590d00846a47034
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403879
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Prepares spdk_iscsi_execute() to handle the case where
spdk_get_pdu() will return NULL in a future patch instead
of abort()'ing.
Change-Id: I8f7e46495db2c517970e7e5de6ace1b13159b42b
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/403883
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Prepares spdk_iscsi_send_r2t() to handle the case where
spdk_get_pdu() will return NULL in a future patch instead
of abort()'ing.
Change-Id: Id18c39a7ea0ea748f1ecb842aee9a08594fb2a48
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/403878
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Prepares spdk_iscsi_op_nopout() to handle the case where
spdk_get_pdu() will return NULL in a future patch instead
of abort()'ing.
Change-Id: I6a0563c14a1bddf219dd12de67f83b18d6fd82f4
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/403874
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Prepares spdk_iscsi_op_logout() to handle the case where
spdk_get_pdu() will return NULL in a future patch instead
of abort()'ing.
Change-Id: I31f854741906023c734151e3b00b939cdafb2ec4
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/403864
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Prepares spdk_iscsi_op_text() to handle the case where
spdk_get_pdu() will return NULL in a future patch instead
of abort()'ing.
Change-Id: I21036116936c50c5674e0d11bbb4a30938bf5336
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/403860
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Prepares spdk_iscsi_op_login() to handle the case where
spdk_get_pdu() will return NULL in a future patch instead
of abort()'ing.
Change-Id: I95da4ff967667f6439330d7959c6937c55522e9a
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/403857
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Prepares spdk_iscsi_reject() to handle the case where
spdk_get_pdu() will return NULL in a future patch instead
of abort()'ing.
Change-Id: Id29bed20cedbb7c42b75fcb0ce6070f561d4a3d0
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/403856
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Prepares spdk_iscsi_read_pdu() to handle the case where
spdk_get_pdu() will return NULL in a future patch instead
of abort()'ing.
Change-Id: I9ccfbf41821fb90a203fd8ad026f42fac10e9dbc
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/403745
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
ImmediateData in negotation parameters can be controlled by the config
file and currently "Yes" or "No" are valid values of it in the config
file. "Yes" or "No" means almost bool. Additionally, ImmediateData is
defined as boolean value in the iSCSI specification as follows.
However ImmediateData is an uint32_t variable and 0 or 1 are used in
SPDK now.
In the upcoming JSON config file, boolean value should be set to
ImmediateData.
Hence change all variables and constants related with ImmediateData
to boolean in this patch.
InitialR2T, DataPDUInOrder, and DataSequenceInOrder are not controllable
by the config file but these are defined as boolean value in the
iSCSI specification.
Hence change them to bool too.
Besides, AllowDuplicateIsid is used almost as boolean value. Hence
change it to bool too.
InitialR2T=<boolean-value>
ImmediateData=<boolean-value>
DataPDUInOrder=<boolean-value>
DataSequenceInOrder=<boolean-value>
Change-Id: I9f98b219687b3600194563b1d6b85551f4586144
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403237
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
For the CHAP setting of iSCSI targets, JSON-RPC handles the
value of parameters directly and dump of iSCSI targets can be
used to construct directly.
For the CHAP setting of iSCSI discovery session, the same manner
will be applied.
Change-Id: I8731af4273cc89ee5c4ea2f97955e56e3bff202d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/401076
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This enables more clear division of spdk_sock_* functions
and spdk_posix_* ones.
Change-Id: I329eaf99de9390c8473b57427966dfe6af777abb
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/403700
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
A net implementation should be allowed to not create a socket group.
It would basically mean that it is not participating in polling at all.
This came up during VPP integration. To enable using both types of sockets,
all types are polled within socket group. There is possibility of VPP
not being initalized at all (VPP process not running or failing connecting).
This would result in hard requirement of VPP always running when its
support is compiled into SPDK. Handling NULL here allows VPP to opt-out of
this polling.
Change-Id: Id3489eaba858ee64e8e8a924a6836720e84d9ad0
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/403699
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This was left over from direct mode.
Change-Id: I967e59f95cc097da09bb35ea77eb5f7423a4ac8a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403385
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Eliminate struct nvmf_tgt and the g_tgt global variable.
Change-Id: I6b737c4b85dc7d063ead1df5417d344c0f35a30d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403384
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
These don't need to be exposed in the subsystem-wide header.
Change-Id: I5da31b02aaa2fba6e19fbc90dbf4cabc90240b0b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403383
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
After the previous cleanup patch, this was just calling
spdk_nvmf_subsystem_create() without any other functionality, so call
spdk_nvmf_subsystem_create() directly from its call sites and remove it.
Change-Id: I5dc1a0a00025a120d71270c5a5c94e8d74c2a3ab
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403381
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This should be enforced by the main NVMe-oF target library, not in the
event subsystem code.
Change-Id: Ibce4fd78710b4a9da374e3d5979df4a16e91533c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403380
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
After the previous cleanup patches, this function was just calling
nvmf_tgt_create_subsystem() with no other functionality.
Change-Id: I1b20887cade7496093e0b69778df30f818eeb764
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403379
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Remove the serial number from the parameters of
spdk_nvmf_construct_subsystem().
Change-Id: Ib6d394cc98fddf85fc878fe0a8c8aa0fdcddf7f4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403378
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When vhost has sent too many events and the eventq
ring is full, the very next event will be sent with
EVENTS_MISSED flag set. Virtio after processing such
event should do a full target rescan to manually detect
all changes - this implies
1) hot-attaching targets that appeared, and
2) hot-detaching those that don't respond properly.
Virtio has been doing only #1 so far.
Change-Id: Ib8be986588913ad41296dcfd6558ff705b99007c
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/402120
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Virtio response codes other than OK, BAD_TARGET
or INCORRECT_LUN indicate an intermittent device/transport
failure and don't need to be handled by each message
response handler separately.
Change-Id: Iab0b03b3c7b377d2b346344c32e5df143df528b0
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/402119
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Remove the array of allowed hosts from the parameters of
spdk_nvmf_construct_subsystem() and add the hosts individually now that
we have the capability to add them after subsystem creation.
Change-Id: I8b05e44d6a254f8d5848975e4bcfb7847e2cf4f3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403377
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Remove the array of listen addresses from the parameters of
spdk_nvmf_construct_subsystem() and add the listen addresses
individually now that we have the capability to add them after subsystem
creation.
Change-Id: If9b9e5f5ce2e6af2bddbda7c3926170f2296abdd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403376
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We must hold bdev->mutex around all QoS channel manipulations, not just
channel_count; otherwise, there are race conditions.
Change-Id: I6183aef83f4d5789bded426a1832e3faaa688363
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403367
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The helper functions were only needed when this was sent as a message,
but they are only called directly in the current code, so just move the
contents of the functions inline to their call sites.
The unregister path can also be simplified to pass the poller directly
to spdk_poller_unregister(); it already handles the case of a NULL
poller.
Change-Id: I509cf8922b53e1e616c9e976610b20061bb50066
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403364
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Trace the initiator and target name for debugging purpose.
Change-Id: I89230484072a7f12a58b4234abd1026a228f302a
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/403690
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Return NULL on resource failure (calloc) instead of
abort()'ing in static nbd function and check result
returning an errno, in that case, further up the call
chain.
Change-Id: If95f8db745fa77c76c415a1aa54c5338c270628f
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/403588
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will be used to track time used in pollers - each poller can now
indicate if it found any work to do or not.
For cases where it was obvious and the infrastructure was already in
place, existing pollers have been modified to return 0 or a positive
value to indicate whether work was done. Other pollers have been
modified to return -1 by default, indicating that the poller isn't
indicating anything about whether work was performed. This will allow
us to find un-annotated pollers easily in the future and fix them
incrementally.
Change-Id: Ifebfa56604a38434fac5c76ba7263267574ff199
Signed-off-by: Roman Sudarikov <roman.sudarikov@intel.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/391042
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There are two separate function pointer types declared in io_channel.h:
spdk_thread_fn for cross-thread messages, and spdk_poller_fn for
pollers. They currently have the same signature, but this will be
changing in an upcoming patch, so we need to fix the poller-related
functions to use the correct type (a few were using spdk_thread_fn by
mistake).
Change-Id: I0f0d8f1eea9905395125fc91e0355a49e65be99e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403598
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is a leftover from moving nvmf to a subsystem.
Change-Id: I6ad07d3c60dff29e34b92c9cf18ac451cfd00918
Fixes: 2491021f64 ("nvmf: convert nvmf_tgt into an event subsystem")
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403374
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This better matches the style in the rest of SPDK.
No functional change - this is a pure find/replace of
spdk_bdev_module_if to spdk_bdev_module. Instances of this struct will
be renamed in another patch.
Change-Id: I3f6933c8a366e625fc3a1b6401aee26ee03ba69c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403368
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Modifies behavior of spdk_trace_init() such that it returns
on failure instead of terminating with exit().
Change-Id: I0ba321cddd233008a4b19bc592728230d89a11b2
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/403357
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Return NULL on resource failure (spdk_mem_get) instead of
abort()'ing in static bdev function.
Change-Id: I0ee2ce4b7e81cf80546119e3db27c987fa912749
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/403578
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
BlobFS shutdown path needs to be investigated more with these
changes.
This reverts commit a137b9afd0.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8b04b24e178945d62db20668b9e500f278ae955b
Reviewed-on: https://review.gerrithub.io/403600
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
For any given blob, if an spdk_blob_sync_md() operation
is already in progress, queue additional spdk_blob_sync_md()
operations until the previous one completes.
This ensures proper ordering of writing metadata to
disk.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2051e8cb5b8d1a033ec1238cb4811232110aa0f4
Reviewed-on: https://review.gerrithub.io/401257
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If we are not in ffp phase, we do not need to update last_nopin
Change-Id: I289beec8437d7117b6261483c333bf5db5fbd11f
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/403166
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
In the upcoming JSON config file, CHAP parameters for discovery will
be specified simply by the value of them.
This is as same as JSON-RPC for target node but different from .INI
config file.
If CHAP parameters are specified by the value of them, the combination
of them must be checked before applied to iSCSI globals.
Change-Id: Idf663796f97581366da945abb8dc351f3975ceae
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403235
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently CHAP parameters for discovery are handled as bool but
they are defined as int. Hence change their type from int to bool
as done for target node previously.
Change-Id: I1e815946d4bdececcdd7cc873a725afbbcb98e50
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403234
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Portal, portal group, initiator group, and target node don't use fixed size
array anymore. To use the same naming rule in iSCSI subsystem and in SPDK
is helpful to understand and maintain. Current naming rule is not bad but
to use unified and compact name is prioritized at this time.
This patch changes function names as follows:
- spdk_iscsi_init_tgt_nodes() -> spdk_iscsi_parse_tgt_nodes()
- spdk_cf_add_iscsi_tgt_node() -> spdk_iscsi_parse_tgt_node()
- spdk_iscsi_portal_grp_array_create() -> spdk_iscsi_parse_portal_grps()
- spdk_iscsi_portal_grp_create_from_configfile() -> spdk_iscsi_parse_portal_grp()
- spdk_iscsi_portal_create_from_configline() -> spdk_iscsi_parse_portal()
- spdk_iscsi_portal_grp_array_destroy() -> spdk_iscsi_portal_grps_destroy()
- spdk_iscsi_init_grp_array_create() -> spdk_iscsi_parse_init_grps()
- spdk_iscsi_init_grp_create_from_configfile() -> spdk_iscsi_parse_init_grp()
- spdk_iscsi_init_grp_array_destroy() -> spdk_iscsi_init_grps_destroy()
For example "parse" is already used to explain the operation in portal_grp.c.
Hence using "parse" is familiar and not strange in iSCSI.
Change-Id: Ieff952069d39bd96b7afa1586bfff927968accc2
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403149
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Some variables of struct spdk_iscsi_globals are initialized by using
.INI config file but others are initialized without using .INI config
file.
This patch aggregates all initialization operations into a function
spdk_iscsi_initialize_iscsi_globals().
Next patch move the code to read .INI config file from
spdk_iscsi_initialize_iscsi_globals() to spdk_iscsi_parse_iscsi_globals()
to make implementation cleaner.
The purpose of the patch series is
- to separate iSCSI subsystem initialization and iSCSI subsystem
configuration, and
- to develop a new JSON-RPC by reusing the separated iSCSI subsystem
initialization.
Change-Id: I0bda0de1d8bf1ba5e4b4e5157949fd300ec9ff9d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403148
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Upcoming JSON config file will support iSCSI global params initialization.
This patch is an effort for JSON config file to reuse the current code as
much as possible.
SPDK's other libraries use options structure effectively, and hence
iSCSI library also utilizes it.
The purpose of the patch series is
- to separate iSCSI subsystem initialization and iSCSI subsystem
configuration, and
- to develop a new JSON-RPC by reusing the separated iSCSI subsystem
initialization.
Change-Id: I9936a4cac4048adaa5d69233f156887376d7cde1
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403147
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch is to add the basic support of QoS on bdev.
Including two major functionalities:
1. The QoS rate limiting algorithm:
a. New IO will be always queued first also under
the no memory condition
b. Start the QoS IO operation based on the limit
c. A poller started in each millisecond to reset
the rate limit and send new IOs down
d. The rate limit is based on the millisecond and
converted from user configurable IOsPerSecond
2. The Master Thread management:
a. Add a per bdev channel_count
b. Whenever QoS is enabled on bdev, if QoS bdev
channel is not created, create the QoS bdev
channel and assign the QoS thread
c. When new IOs coming from different channels
(threads), pass the IOs to the QoS bdev channel
through the thread event
d. When the IOs are completed from the QoS bdev
channel, pass the IOs back to its orignal
channel(thread)
e. Destroy the QoS bdev channel when it is the
last bdev channel for this bdev. Defer the
destruction if current thread is not QoS thread
Change-Id: Ie4444551d7c3c7de52f6513c9db926628796adb4
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/393136
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I94bbf1f035aca463530450811200f1f1800d6485
Fixes: 4294719ed7 ("subsystem: make subsystem declaration ...")
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403355
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: If5e16c2ac148fd4818c942e8f57b02671e76ed62
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/403153
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Currently SPDK_BDEV_MODULE_REGISTER() take many parameters. Extending it
(eg for incoming JSON configuration dump/load) is quite challenging and
error prone. As we are already here in next patches, rework this macro
to take one parameter - the pointer to struct spdk_bdev_module_if.
This patch also remove following macros:
SPDK_GET_BDEV_MODULE - this is not really needed, to find module outside
module translation unit use spdk_bdev_module_list_find()
SPDK_BDEV_MODULE_ASYNC_INIT and SPDK_BDEV_MODULE_ASYNC_FINI - replaced
by bool fields in spdk_bdev_module_if struct.
Change-Id: Ief88e023fbbaee7d5402c838dbecbdffd4dfb259
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/402883
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Don't do anything under the scene as adding/removing fields in struct
spdk_subsystem will require both macro change and C file changes.
Change-Id: I11bc0d5758edd7e0e0bd3f93e251d868cd9b1d2b
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/401850
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This allows vhost initialization to be fully handled in the event
framework subsystem.
Change-Id: Ic0ff11f3765cc553b7ca183027209fb6dd131364
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403226
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This lets us drop the basename parameter from spdk_vhost_startup(),
which is a step toward making vhost initialization happen as part of the
event subsystem instead of in the spdk_app_start() callback.
Change-Id: I4fe18c4c3f12b706e73ae74500be58f1582110fd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403225
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is required as part of our effort to build a single target app that
can run e.g. NVMe-oF and iSCSI targets in the same process.
Change-Id: Ic8426df08899070d709e3675a57f47f64c23c5eb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403218
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This can be used to force specific UUIDs for testing.
Change-Id: I40c403fd00c142552d632dd5f0fbe1ea9a6c9962
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403221
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch extracts iSCSI subsystem initialization by .INI config file
into a function spdk_iscsi_parse_iscsi_globals().
Naming rule was adopted from NVMf-tgt.
By these two patches,
iSCSI subsystem init is done in spdk_iscsi_parse_iscsi_globals().
iscsi subsystem config is done in spdk_iscsi_parse_iscsi_configuration().
The purpose of the patch series is
- to separate iSCSI subsystem initialization and iSCSI subsystem
configuration, and
- to develop a new JSON-RPC by reusing the separated iSCSI subsystem
initialization.
Change-Id: Ibafb0b62cbb0aa23dd6dd6007dad0345293e65b8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403146
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
iSCSI poll_group initialization must be completed before starting JSON-RPC.
This doesn't have any dependency to the other iSCSI subsystem
initialization and completes asynchronously. Hence thisis good to be placed
at the end of iSCSI subsystem initialization.
Besides, object creation of iSCSI configurable components started after
poll_group initialization by .INI config file is aggregated into a function
spdk_iscsi_parse_iscsi_configuration().
Naming rule was adopted from NVMf-tgt.
The purpose of the patch series is
- to separate iSCSI subsystem initialization and iSCSI subsystem
configuration, and
- to develop a new JSON-RPC by reusing the separated iSCSI subsystem
initialization.
Change-Id: I44421803268361f53840a7e47f07ce95c13d1139
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403145
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The next patch will move the location and change the callback of poll
group initialization. Besides it is probable for JSON config file to
change the callback of poll group initialization.
Passing callback as argument increases visibility and flexibility of
code.
Change-Id: Ie4bfd2c60a112bb7c697110ef0efc30a2c098dc8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403144
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Pool of iSCSI connections and related variables are initialized in
initialize_iscsi_conns().
Currently initialize_iscsi_conns() is located after configuration of
target nodes by .INI config file.
Configuration of target nodes can be done by JSON-RPC but connection
initialization must be completed before starting JSON-RPC.
iSCSI connections don't belong to iSCSI global params directly and
hence move connection initialization right after initialization of
iSCSI global params.
The purpose of the patch series is
- to separate iSCSI subsystem initialization and iSCSI subsystem
configuration, and
- to develop a new JSON-RPC by reusing the separated iSCSI subsystem
initialization.
Change-Id: I183365b84aa205790b27adf7cc1f632b932195aa
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403143
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
iSCSI subsystem have a pool for PDU, session, and task, respectively.
They belong to the struct spdk_iscsi_globals and are initialized by
using the parameters of the struct spdk_iscsi_globals.
Hence their initialization should be located just behind the setup of
parameters of the struct spdk_iscsi_globals.
The purpose of the patch series is
- to separate iSCSI subsystem initialization and iSCSI subsystem
configuration, and
- to develop a new JSON-RPC by reusing the separated iSCSI subsystem
initialization.
Change-Id: Ie39f63ee24c547dcd31a1a06d72d915e8c272864
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403142
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Object creation of portal, portal group, and initiator group can be
done by JSON-RPC.
This patch moves object creation of portal, portal group, and initiator
group right before object creation of target node.
The purpose of the patch series is
- to separate iSCSI subsystem initialization and iSCSI subsystem
configuration, and
- to develop a new JSON-RPC by reusing the separated iSCSI subsystem
initialization.
Change-Id: If78beabb478923e7c920c09b16e42d6f8aa55775
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403141
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There are four configurable components, portal, portal group, target node,
and initiator group in iSCSI.
They have a TAILQ to manage their objects, respectively.
Currently each TAILQ initialization is done together with its object
creation by .INI config file.
This patch separates TAILQ initialization from object creation for four
configurable components in iSCSI.
The purpose of the patch series is
- to separate iSCSI subsystem initialization and iSCSI subsystem
configuration, and
- to develop a new JSON-RPC by reusing the separated iSCSI subsystem
initialization.
Change-Id: Ia4ac3f06f15acef671e785904f4c687e5d189fbe
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403140
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie7a940efde885dbf0bb7c085fd17c3991dfa3341
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/403165
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Modifies behavior of spdk_app_start() and spdk_app_parse_args()
such that they return on failure instead of terminating with
exit().
Change-Id: I82566417f04e1ae2e3ca60a00c72e664db26c9e4
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/401243
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I738b4e28065797c9df7b0bc27ec0aee8c9f4f257
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402381
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds possibility to set internal xattrs on blob
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I2d0f14558e4a1af7071ee1a4f59aaf9f14bea2d9
Reviewed-on: https://review.gerrithub.io/396418
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Unit tests implemented in following patches.
This is rebased patch from https://review.gerrithub.io/#/c/396648
merged as commit c1174e6895
and reverted in 0847f27b54.
Change-Id: I3d152bf7847c83bf75149edd61564c1f393927d8
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Reviewed-on: https://review.gerrithub.io/402529
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
For some xattrs we need to know its value even if blob is in loading
state, e.g. BLOB_SNAPSHOT xattr value when blob is loading.
Change-Id: I1cd7805cf33be64cf59792f85a270e9b536e23bd
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/403062
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Ief1f809308fbde2e696c60d3ce79c0720cb3e2ff
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Reviewed-on: https://review.gerrithub.io/398934
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I22c11cdd5ab0ffdf72b27223c0c9cd7282537613
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/402667
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In addition to the lvolstore uuid, add a per-lvol uuid for bdev
identification.
The lvol uuid is stored as an xattr for each lvol blob; if an lvol blob
without a uuid xattr is encountered, the lvol bdev will not report a
uuid for now (it will be set to all zeroes, which will be treated as
no uuid available by the generic bdev layer).
Change-Id: If00221383a12d62234fc085d56e257dd48053103
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402973
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add a generic way to get a UUID from a bdev.
For now, malloc and null bdevs generate random UUIDs, and no other bdev
types report a UUID.
Change-Id: Id9608c8c1b3ce3f1783e7f74bef96d44cd5d98a7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402177
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This lets us have a common place to put definitions like the length of
the UUID string, as well as abstract away some of the API warts in
libuuid (non-const values, no size checking for uuid_unparse, etc.).
Change-Id: I80607fcd21ce57fdbb8729442fbb721bc71ccb98
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402176
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Rather than explicitly asking for time-based UUIDs, let libuuid choose
the best available UUID source (high-quality random number based if
available, or time-based if not).
Change-Id: Ic2f538890f86d3158b64f5884708439b72c373f6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402963
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We should add this state after free the io channel.
To make sure that we will not touch the wild pointer.
Change-Id: I570f649fe3ddffaea430125b40c6b6b020a05222
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/402999
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Before this patch super_blob id for blobstore was persisted
only during spdk_bs_unload. If power fail occurred after creating and
syncing blob, super_blob id was lost within blobstore.
Lvol store metadata would be lost, if proper shutdown
didn't occur in first SPDK instance run since creation of lvs.
This fix changes setting super blob to be instantly persisted
on disk in super block. Without affecting clean bit in super block.
Change-Id: I578f1fc8717e2d7968ad506fa4dead7507a5e0b4
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/398804
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The variable ntargets in the struct spdk_iscsi_globals was needed
previously because iSCSI target node was managed by a fixed size
array.
Now iSCSI target node is managed by a linked list and ntargets
doesn't take any meaningful role now.
Change-Id: I1805d7a6a6ce40efa4d18f198fbb9104bee43b26
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/402976
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Even if the value specified by user through the config file is correct,
the default value is always set to DefaultTime2Retain.
Change-Id: Ifdf44e743419813b728a1423c441df59cc90c0a1
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/402635
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Ic3a612ceed65799d16dae111db355333a1915187
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/403002
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5e636c4c9d930de0d9e6eadd453f0d17eadaf45e
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/402530
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A bdev that is claimed is not a leaf, even if it has no vbdevs exposed
currently.
Change-Id: I3b790068128890a569f83b15071ea916c54bff9b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402935
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
As for NVMeoF controller, SPDK always set volatile write cache to
present, so OS may submit FLUSH command to backend block device,
while here, return success for those block devices which can't
support FLUSH command.
Change-Id: Ib764503f1986e7e0a38a1751a91d6c11e1b78865
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/402653
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also remove the related login and full feature
function
Change-Id: Ia2d0a6617910134c889d1322b53830fe26b9e956
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/402486
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This patch will also re-export spdk_iscsi_conn_destruct
Change-Id: I7d6cbba33294c84398a919d888c8b375e901e09e
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/402485
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
iSCSI's global mutex is used in spdk_iscsi_portal_grp_create()
before it is initialized by pthread_mutex_init().
A mutex filled with zero bytes has been accepted by now but
this should be fixed.
Change-Id: I2e197bec8da2f781c8c4f6e2a2caf9924b0a4369
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/402497
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Put it in the iscsi.c
Change-Id: Ifb2843fb7c78f9ca948eac60704547b8b0635bf0
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/402484
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Automatically detect more whitespace errors.
All existing cases are fixed; only whitespace change (verify with
diff -w) except for one comment style fixup in include/spdk/nvme.h.
Change-Id: If750e54b9c8e3421ea6feda5f20184a31431631e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402360
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Currently if the application exits with some error (i.e., core
dump), the socket file is not removed. So that at next time the
RPC method can not enabled unless user manually removes the
socket file. The error of failing to start RPC is not that
obvious.
This patch introduces a lock for the reuse socket to properly
detect the only usage and handles the above error case particularly.
Refer to https://gavv.github.io/blog/unix-socket-reuse/ for the
details.
For the concern of the sockect file can be shared from different
applications, in the spdk_app_opts struct, it offers a parameter
to assign a specific socket file per application.
Change-Id: Ie2ef6af9207c468279cba5efd173fd06579ccdc7
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/396089
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I30675083dcb7dda47ac62eaf124614033ff9c587
Reviewed-on: https://review.gerrithub.io/401702
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This change wasn't correctly rebased and needs to be updated to compile
against the current blobstore.
This reverts commit c1174e6895.
Change-Id: I529608bee7323cb626d8c36dff15adc9ba24ad26
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402352
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Unit tests implemented in following patches.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ib18c9060f527bd22bfdbed74e96871a6e0551ead
Reviewed-on: https://review.gerrithub.io/396648
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Currently only thin_provisioned zeroes back_bs_dev is supported.
There was no unit tests for channel in this bs_dev, because it's never used.
However, unit tests in patch https://review.gerrithub.io/c/393935/ show that channel is wrong.
This patch passed proper spdk_io_channel to callback function.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ia288ef6c35343ce533ea3f74603e73f823a18181
Reviewed-on: https://review.gerrithub.io/400955
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch adds the QoS parameters on the bdev channel.
Change-Id: I0cb9bf9e9cdbbe61c70c4a3df4eeb8be774793a0
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/393129
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Briefly tested with SPDK target via bdevio
through both vhost-user and QEMU's virtio-pci.
vhost-blk driver is not mentioned in any doc yet.
A virtio-blk bdev can be created as following:
`construct_virtio_user_blk_bdev /tmp/virtio.0 MyVirtioBlk0 --vq-count 16`
`construct_virtio_pci_blk_bdev 0000:01:00.0 MyVirtioBlk1`
or
```
[VirtioUser0]
Path /tmp/vhost.0
Type Blk
Queues 16
[VirtioPci]
Enable Yes
```
If `Type` field is not present, the VirtioUser
section will be parsed as a SCSI one, preserving
backward compatibility.
Change-Id: I3eae9f3b90570fbb0177df4951e5eed86fe07c66
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/393056
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If this polling group is not initialized, we do not
need to destroy the polling group.
Change-Id: I5a94412d7f42b05d4a457c8652e2f465190fbe6e
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/401362
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Alters internal spdk_process_new_interface_msg() function
such that it returns a failure instead of exit()'ing.
Change-Id: I31c5dd9db43449f81dbb0f581258476a58aa8000
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/402165
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There was a bug reported by Cunyin Chang with regards to how the
cmb_current_offset was calculated when the CMB offset into the CMB BAR
is non-zero. This patch fixes this issue and also fixes the problem
that the last valid offset into the BAR *may* differ if registration
is utilized or not (due to the 2MiB alignment and length requirements
for registered memory).
Change-Id: Id08d6a5a40b828338f6a66599171cc8dd59768a3
Signed-off-by: Stephen Bates <sbates@raithlin.com>
Reviewed-on: https://review.gerrithub.io/401832
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The better location is to put this function in
the end of process_read_task_completion which can match
the the same function call in spdk_iscsi_op_scsi_read.
Change-Id: I7dbfb23e2c469e0be22e148299643a99b93c8018
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/401985
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Since we have two pollers for each iSCSI polling group,
so it could be possible that the nop_poller to set
iSCSI connection in existed or existing state.
So add a check here, which means the incoming data
is too late.
Change-Id: I94e5090b005c35c9eb5d7eedbd7acdae67327f94
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/402039
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Purpose: To make the logic clear.
Change-Id: I6176f359a23816b316e92b63ee2e5d5175ae7e7b
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/401772
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows listening on the same port on IPv4 and IPv6 simultaneously;
otherwise, the second listen call would fail with an "address in use"
error.
Change-Id: I75010a2d1ec6559653e0bda40517dc13d8f5b9a5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/401718
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
blobfs and lvol can now use this to automatically iterate
all existing blobs during spdk_bs_load. Changes to blobfs
and lvol will come in future patches.
This will also be used in some upcoming patches which need
to iterate through blobs during load to determine
snapshot/clone relationships.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic7c5fac4535ceaa926217a105dda532517e3e251
Reviewed-on: https://review.gerrithub.io/400177
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Currently, this just reports the EUI64 and NGUID types, which are
already available in the Identify Namespace data, but this sets up the
framework for reporting a Namespace UUID (which doesn't have a
corresponding field in Identify Namespace) in the future.
Change-Id: I758e6d402ff874d65eca3f1db98d92c1a3f7a11f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/400893
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch is used to implement the sock fd event group
polling mechanism if there are incoming data from network
(read event in SPDK iSCSI target side) , thus we can awake
many connections one time, and it can reduce the system call
overhead.
Change-Id: I76c26a89ef9365d7e1ccec616985e7435253896b
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/399796
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This simplifies the code and eliminates the possibility of accidentally
inserting other items in between a key and its value.
Change-Id: Ic3bf7d0a85e9475171fe00cbcac6fe3ede731e69
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/401046
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Ctrlrs list maintanined by the subsystem structure should be operated
by the thread which creates the subsystem. And this will make the
operations correct.
Change-Id: I7f881a77b1846658b3acd4270b74f86816e87803
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/401541
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Purpose: To make the nvmf subsystem management correct
in next patch.
Change-Id: Ie5433f3a7d47f05c5949dfc723aba73465623f88
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/401540
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Finish the sequence first, before calling _spdk_bs_free().
Otherwise synchronous bs_devs (like we use in the unit
tests) cause the sequence memory to get freed via
_spdk_bs_free() and then we try to finish the sequence.
This eliminates the need for g_scheduler_delay and
_bs_flush_scheduler() in the blob unit tests. But don't
remove them - they will be useful in upcoming unit tests
for queued persist operations.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I09aac3ae4d3a56ff8e04a5b822fcd6746f13afc3
Reviewed-on: https://review.gerrithub.io/401267
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
No functional change - this just separates out the
code that creates the persist ctx from the code that
actually performs the persist operation.
Part of series to enable queuing persist operations -
this will be useful for starting a previously queued
persist operation.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie1966ff2a477f3075c36f90560010d036658f803
Reviewed-on: https://review.gerrithub.io/401255
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaef32731b05a53ac0707524d78086eedc89d6af6
Reviewed-on: https://review.gerrithub.io/401254
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I096fb24dd2fe2fc4dd97d80c957c328d960fb867
Reviewed-on: https://review.gerrithub.io/401073
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
spdk_blob_close() and spdk_blob_sync_md() currently do their
own CLEAN state. To consolidate the state checking code,
have both functions rely on the check in _spdk_blob_persist()
instead.
This will reduce code but more importantly is needed for
some upcoming changes for queuing persist operations.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I38118624b4fad6f18c4b7466d9ddfa0915c3fce0
Reviewed-on: https://review.gerrithub.io/401065
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
These are common functions that can be called from
any function that reads or modifies a blob's metadata to
perform necessary asserts.
This will also fix several places where blob metadata
functions were asserting the calling thread context,
but not the current state of the blob.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9e16c082a27c439311f8ff214335adadfa715497
Reviewed-on: https://review.gerrithub.io/401053
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
All metadata operations are now done on the metadata
thread, so we no longer have to worry about one thread
updating in-memory metadata structures while another
thread is transferring the in-memory structures to
on-disk structures.
This does not protect against multiple sync operations
outstanding at once - that will be coming in an
upcoming path.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibf33edf4d41d867c96a38df017737e9ceb87fa58
Reviewed-on: https://review.gerrithub.io/401056
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The md (metadata) thread is always the thread that
initialize/loaded the blobstore. Metadata operations may
only be performed from this thread. This patch adds some
more asserts in metadata functions that were previously
missed.
While here, also update some of the blobstore documentation
related to this.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5cafdb3ba402ceb6c3ccb6fdd9d36e7768f59f39
Reviewed-on: https://review.gerrithub.io/400885
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Unfortunatly not all bdevs produce its configuration in responce to
get_bdevs RPC call (eg nvme is producing tons of additional
informations). To not breake any existing scripts rename
'dump_config_json' to 'dump_info_json' instead of reworking those
callbacks. Next patches will introduce real 'dump_config_json' handlers
and API
Change-Id: If9c1a4ab864791b24a5f7d022e970cd65990ffc0
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/401216
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The iSCSI connection does not have the poller anymore, so
change the name
Change-Id: I534f72998c6bcc73ad9caf5e8f700751acd95c99
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/401372
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic2bae1c750d2c9b35bded8ed96c3b84832690ce2
Reviewed-on: https://review.gerrithub.io/401479
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Three new RPC methods are added to allow modification of the NVMe-oF
subsystem allowed host whitelist at runtime:
- nvmf_subsystem_add_host
- nvmf_subsystem_remove_host
- nvmf_subsystem_allow_any_host
Change-Id: I5c98658f949dad013165c04497cca49867022ba0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/396063
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Implement a poor approximation of reset handling for the RBD bdev so it
can pass the bdevio tests.
This should be replaced with a solution similar to bdev_aio, which waits
for all outstanding I/O to return before completing the reset. However,
this should ideally be handled by the generic bdev layer rather than in
each individual module.
Change-Id: I1be2bf90875e23e05efdebb003e5412f3fc43793
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/401273
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously, the RBD bdev only supported a single iovec entry, which is
not sufficient for the bdev API.
Change-Id: Ic18257bae0363b9c01e091547e5b41bae0a21e9a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/401259
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
During converting type of CHAP params of target from int to bool
for JSON, changed names of them to be consistent with others.
In this patch, adjust variable name of struct to of JSON.
Change-Id: I1ccbfa11d57479dc55680835eb80e111bd24d9a3
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/400928
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is a TODO from long ago. Complete this while adjusting dump()
and construct() format of target.
Besides names of variables and parameters about CHAP are not unified
between JSON-RPC and SPDK internal. JSON-RPC's wording looks better
and adjust SPDK internal to JSON-RPC.
Change-Id: I89bcd1ce13a11f7d63a62d51ef094dd302186d37
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/400201
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
