The NVMe specification recommends destroying all I/O submission and
completion queues before setting CC.SHN.
Change-Id: Iad71dd3fe03d897858034f3ca6ee02e0c55cc2b0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The NVMe specification recommends that orderly shutdown should just
write CC.SHN while the controller is still enabled rather than writing
CC.EN = 0 first.
This also allows removal of the now-unused nvme_ctrlr_disable() and
nvme_ctrlr_wait_for_ready() functions.
Change-Id: I4702ffda153f218ebb8ed92f0e36144b7ceded93
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This can happen if the controller is still resetting as the SPDK NVMe
driver takes control.
Change-Id: I263ae8f2e7b271e0448450557452a115c90c4fb6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch is used to handle the memory leak issue when
a parent nvme_request is free. In our current code,
we did not free the nvme_request allocated by the children
in the exceptional case.
Change-Id: Iabd1f1c3594af60c38e74e3d96c14f78d1aa1aed
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
This patch is used to add a nvme_request remove child
helpler function
Change-Id: I1e5bb228d53333ca3601f4ae30fcd801ea39e532
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Drop the "data_transfered" variable and just update length, since length
was not used otherwise after this point in the loop.
Change-Id: Icd2991e4e85de7e8c951ba14c441434e871ea4ef
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
If only one descriptor is needed, there is a special case in the spec for
SGL1 using the Data Block descriptor type. Add a comment to make it
clear what is going on.
Also tweak the SGL1 setup to copy from the first SGL descriptor list
element instead of relying on the last value from the loop above, since
that could be easily broken by accident.
Change-Id: I49ef97fe5bf18d2bf1d86b4310a7d3abdfd03e57
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
tr->u.sgl is already a struct spdk_nvme_sgl_descriptor pointer.
Change-Id: Ie2c8c052fc28e6369d1d095b8d566acae47975d1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
_nvme_qpair_build_hw_sgl_request() will only be called for payload_size
!= 0, so every SGL will have at least one segment. Drop the 'else' that
was handling nseg == 0, and add an assert to document the payload_size
requirement.
Change-Id: I48e2a862a7657ba85605c0d35c0b65dfac072167
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The assert is checking a variable that is invariant within the loop, so
move the assert up to the top of the function.
Change-Id: Iee7eea1736bc7f953665feb390c3d6340dbeffbc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This makes it easier to find the larger doc comments that produce separate
pages.
It also allows removing the lib/nvme directory from the Doxyfile, so
only the public API headers are used to generate documentation.
Change-Id: I8c46edb8067a91dda5b23fb0864efd3dd8aaeba5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_nvme_qpair_process_completions() is already documented in
spdk/nvme.h, so merge the doc comment from nvme_qpair.c into the public
header.
Change-Id: Id7722d99d209852ee64286e0a3fa127b863e10aa
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Don't allow the user to request more than the valid maximum number of
I/O queues (65535) or 0 I/O queues, since this can't be encoded.
Change-Id: I2d6e0bba03476085842bad683b273cdf9d6e6d5e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Per the NVMe spec, SGL segments must be Qword (8-byte) aligned. Add a
static assert to make sure this is true for the sgl member of struct
nvme_tracker (assuming the whole nvme_tracker is at least 8-byte aligned).
Change-Id: I827aa40b56de648d83f524a4f1e79c3202b676be
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
If the controller is failed, attempting to submit additional I/O is
futile - it will be immediately failed using the completion callback,
which can result in infinite recursion if the application code resubmits
I/Os on failure.
Instead, provide a way for request submission to indicate failure, and
use it to exit early if the controller is failed; this can only happen
when a reset failed (timed out).
If a request is submitted directly by the user when the controller has
failed, we can return an error code directly. For the case where I/O
was queued and is being resubmitted after a reset, we still need to call
the completion handler via _nvme_fail_request_ctrlr_failed().
Change-Id: I9e144328d524b25db2acf48e923b584746e8d0b6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Provide a new structure, spdk_nvme_ctrlr_opts, to let the user modify
the default controller initialization options during probe/attach.
Currently, only the number of queue pairs can be modified in this way;
other options will be added later.
Change-Id: Ie27b9429291d93a9353c0d820f0ad467d3b0e7cb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add a parameter to each I/OAT library function that requires a channel
instead of implicitly using the thread-local channel registration model.
I/OAT channels are already reported by the spdk_ioat_probe() attach
callback, so no infrastructure for channel allocation is necessary.
Change-Id: I8731126fcaea9fe2bafc41a3f75c969a100ef8f0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Replace the previous code that allocated each tracker individually with
one large allocation per queue pair.
struct nvme_tracker is now explicitly padded to reach exactly 4096 bytes
to allow normal array indexing to work correctly while maintaining the
alignment requirement that ensures each tracker's PRP list does not
cross a page boundary.
This also allows removal of the act_tr array, since the tr array can be
indexed directly now, and each tracker can store its own active state.
Change-Id: Ia7c51735b96594d12f7f478cefcc4aedc84207ad
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The previous method for registering I/O queues did not allow the user
to specify queue priority for weighted round robin arbitration, and it
limited the application to one queue per controller per thread.
Change the API to require explicit allocation of each queue for each
controller using the new function spdk_nvme_ctrlr_alloc_io_qpair().
Each function that submits a command on an I/O queue now takes an
explicit qpair parameter rather than implicitly using the thread-local
queue.
This also allows the application to allocate different numbers of
threads per controller; previously, the number of queues was capped at
the smallest value supported by any attached controller.
Weighted round robin arbitration is not supported yet; additional
changes to the controller startup process are required to enable
alternate arbitration methods.
Change-Id: Ia33be1050a6953bc5a3cca9284aefcd95b01116e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Since the nvme_tracker struct was extended to allow space for 253 SGL
descriptors at 16 bytes each, we can use the same amount of space in the
other branch of the union to store 506 PRP list entries at 8 bytes each.
This increases the maximum supported I/O size for PRP-only devices from
128 KB to slightly under 2 MB.
Change-Id: I2b9905be41343ff360b4cdaccca87ea6f753e89c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Also add a compile-time assert to make sure this doesn't accidentally
break again in the future.
Change-Id: I4d18cfbf21392291e1bdd76eff055429009d28d6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
nvme_ctrlr_cmd_create_io_cq() was using the queue ID as the
IV (Interrupt Vector) field in the Create I/O Completion Queue command.
Since the SPDK NVMe driver does not enable interrupts, this is
misleading at best.
Change-Id: I3ea53701fdb9f21d9dc8d8fe20ccf2833b76cfbf
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch just implement the feature of format progress indicator.
the NVMe available does't support FPI currently.
Change-Id: Ie937591fb1720d8a062354322aabcc95ff14b2d3
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
This field is write-only in the current code; the NVMe library does
not track timeouts on requests.
Change-Id: I50e53bb3c299bf16912c48be8aad3eec829154af
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
When I/O spans a stripe boundary, the driver splits the request into
multiple requests, so for 1 segment memory larger than the stripe
size, we also need to split the segment memory.
Change-Id: I22ea5734d7066865a57a3c90fe18d5f76f373f1d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
For those NVMe controllers which can support SGL feature in
firmware, we will use SGL for scattered payloads.
Change-Id: If688e6494ed62e8cba1d55fc6372c6e162cc09c3
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
nvme_spec.h already has a structure with the correct bitfields for the
CSTS register, so use it in struct spdk_nvme_registers.
Change-Id: Id0663aee2611fb5195f9012a3176799e32701bb0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This will be exposed in the public API. This rename is in a separate
commit to ease review.
Change-Id: I1b7fef36f85265db27935ac4d22ceef3c7282502
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Set up the infrastructure for creating I/O submission queues with
variable queue priority (QPRIO in Create I/O SQ command).
Currently, this is unused, since we always use the default arbitration
method (round robin), but it will allow reinitializing submission queues
with the correct priority once weighted round robin is supported.
Change-Id: I425003879e624cfcc9687bdc495b5c1726b5a8af
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This function no longer exists and was not part of the public API.
Change-Id: I94fd066b63e812367687d11bc00aa11ab88d4671
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Many of the internal controller initialization functions did not check
for allocation failure; add return codes and check them where
applicable.
Change-Id: Id1b33bb06fca84035369d8b7ecd4c36b8ba7134c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This function returns true if the namespace is active or false if it is
inactive (e.g. no namespace has been attached to the specified namespace
ID yet).
Also use the new function to add checks in the examples and tests where
applicable.
Change-Id: I35465b315ae1a1677c5a82191ad9b1da1c216d50
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Prepare for qpair to be exposed as part of the public API.
Change-Id: Ia63e863e95554adceeade20c829f12fe346375d5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
When multiple NVMe controllers are being initialized during
spdk_nvme_probe(), we can overlap the hardware resets of all controllers
to improve startup time.
Rewrite the initialization sequence as a polling function,
nvme_ctrlr_process_init(), that maintains a per-controller state machine
to determine which initialization step is underway. Each step also has
a timeout to ensure the process will terminate if the hardware is hung.
Currently, only the hardware reset (toggling of CC.EN and waiting for
CSTS.RDY) is done in parallel; the rest of initialization is done
sequentially in nvme_ctrlr_start() as before. These steps could also be
parallelized in a similar framework if measurements indicate that they
take a significant amount of time.
Change-Id: I02ce5863f1b5c13ad65ccd8be571085528d98bd5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This check was dead code, since both places that called
nvme_ctrlr_wait_for_ready() could only ever have cc.en = 1.
Remove the original nvme_ctrlr_wait_for_ready() wrapper and rename
_nvme_ctrlr_wait_for_ready() without the underscore to replace it.
Change-Id: I6c9aa6a5b93606fb89d168c23f6735fcf3a84eaa
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
In nvme_ctrlr_hw_reset(), if we encounter a controller whose CC.EN bit
is already 0 (controller is disabled), the previous code would enable
the controller just so that it could be disabled to get a full reset
(transition from CC.EN = 1 to CC.EN = 0). However, it is a safe
assumption that if CC.EN is already 0, the controller has just been
reset, so we don't need to reset it again.
This saves a significant amount of time (2+ seconds per controller with
Intel SSD DC P3700) during initialization for devices that were disabled
on startup.
Change-Id: I552b1f0f185a84a8a0ce57a93b012d9d5fe096f3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
cleanup.sh and unbind.sh have been combined into a single
setup.sh that takes one optional parameter (reset). If no
parameter is given, the script will automatically bind
all NVMe and IOAT devices to either uio_pci_generic
or vfio-pci, as appropriate based on IOMMU settings. If
the reset parameter is given, the devices will be bound back
to the appropriate kernel drivers.
Change-Id: I25db3234f1ecfb352a281e5093f4c1aa455152ae
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Explicitly include system headers for types that are used in public
headers.
These were being pulled in by example code, so SPDK itself would build,
but other apps that did not include stdbool.h would fail to compile when
including spdk/nvme.h.
Also include nvme.h first in nvme_internal.h so this case gets tested
during normal compilation.
Change-Id: I8ed0fc4e0dcf71551738c461b4b825cc2ee1d233
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
payload here is a pointer to the buffer, not a struct nvme_payload.
Use nvme_allocate_request_contig() and pass the length in bytes rather
than dwords.
Change-Id: Idbbb3614b1d69148fe041d26e0c148bd9ce53724
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The parent field is in the cache line of nvme_request that is only
supposed to be accessed for split (child) I/Os. All accesses to parent
are done from child-specific calls now, so it does not need to be
initialized in the common case of a non-split I/O.
nvme_request_add_child() will set parent when splitting occurs.
Change-Id: Ib86c16ba1ea2ce32f62079831101da2a099047af
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Allows simplification of _nvme_qpair_build_sgl_request(), which does not
need to know whether a request is a child or not.
This also removes a read of req->parent for non-split I/Os; the parent
field is in the section of nvme_request that is only intended to be
initialized for split I/Os, which should be detected by looking at
num_children.
Additionally, this fixes a potential problem if requests were nested
more than one level deep (e.g. req->parent was not the original user
request).
Change-Id: I3ea1dc134bbb1e3b8c6b5a479f5d760bd97ea848
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch fixes the following issues in ioat_impl.h
while CONFIG_PCIACCESS is set to n:
1 lack of the definition of ioat_pcicfg_unmap_bar.
2 Define a macro to remove the duplicated vendor code
for ioat_driver_id enumration.
Change-Id: I4011098ac296d1ec320bffb5ffa6e098b70a5545
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Building the tip of the spdk master against the dpdk-2.2.0 fails with
inappropriate RTE_CACHE_LINE_SIZE error. The simple reversal of the RTE
include file order below fixed it for me.
Change-Id: I8782b7ee21d7f185e6e678f874fbdab9403117a5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch is used to remove the duplicated code.
As we found the structure in "ifdef and else" are same.
Change-Id: I1717ce3dcc14134ac59c165d801e5e811b987be5
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
This patch is used to support spdk_pci_device_cfg read/write
with byte and word size.
Change-Id: I49084e231bd6b5f5b22180a3eb36ddad4430b3a4
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Move toward collecting PCI IDs, class codes, etc. in pci_ids.h instead
of individual device-specific headers.
Change-Id: Icff162d48ac663db71d0576ceee16a9bd7a751cd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
PCI_VENDOR_ID_INTEL -> SPDK_PCI_VID_INTEL
Also change the inclusion guard macro to be consistent with the other
SPDK headers.
Change-Id: I29346267172cb8c07cc4289eed4eca2d55e942d6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This doesn't need to be part of the public API. It is only used by the
NVMe quirk lookup tables.
Change-Id: I7662e333c70b7c5f814bd7c8a528b6bff1f0732e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Rename all functions with a spdk_ prefix, and provide enough of an API
to avoid apps needing to #include <pciaccess.h>.
The opaque type used in the public API for a PCI device is now
struct spdk_pci_device *.
Change-Id: I1e7a09bbc5328c624bec8cf5c8a69ab0ea8e8254
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is a step toward abstracting PCI access so that libpciaccess can be
swapped out more easily.
Change-Id: I5491459460cbfbd0be471f70f9d07a7eb3175234
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Instead of writing the completion doorbell once per completion,
just write it once at the end of the completion while loop.
This reduces the number of mmio writes by coalescing several
writes into one when we get multiple completions at a time.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3cc3864dcfe43186bec51be1a732e84ef3be05ae
Similar to the NVMe API change, this allows better abstraction of the
PCI subsystem.
Change-Id: I2b84d9c3c498a08d4451b4ff27d0865f0456c210
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch did the work to use pci related functions
provided by DPDK.
Change-Id: I263b79f1b42868ef0c1efcf1bc392a4b3a328e93
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
With CONFIG_PCIACCESS=y in CONFIG file, we can
use libpciaccess library; With CONFIG_PCIACCESS=n
in CONFIG file, we use pciaccess functions provided
in DPDK.
Change-Id: I786c5589b8e7909ba2e59d222938dd5ba45bf92d
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The new probing API will find all NVMe devices on the system and ask the
caller whether to attach to each one. The caller will then receive a
callback once each controller has finished initializing and has been
attached to the driver.
This will enable cleanup of the PCI abstraction layer (enabling us to
use DPDK PCI functionality) as well as allowing future work on parallel
NVMe controller startup and PCIe hotplug support.
Change-Id: I3cdde7bfab0bc0bea1993dd549b9b0e8d36db9be
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
For those Crystal Beach DMA channels which support block fill capability,
we add a fill API here that can zero out pages or fill them with a
fixed pattern.
Change-Id: I8a57337702b951c703d494004b111f6d206279fb
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
This patch adds Intel NVMe device list and overrides the
supported log pages according to the quirk list.
In particular, the READ_CMD_LATENCY and WRITE_CMD_LATENCY pages are
supported on Intel DC P3x00 devices despite not being listed in the
Intel vendor-specific log page directory.
Change-Id: I3a2b6a5fa142c6e9c93567df65e85980bd3c7cc0
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Also add a space between Copyright and (c).
The copyright year can be determined using git metadata.
Also remove the duplicated "All rights reserved." - every instance of
this line already has a corresponding "All rights reserved" immediately
below it, except for examples/ioat/kperf/kmod/dma_perf.c, where I have
added it manually.
Performed using this command:
git ls-files | xargs sed -i -e 's/Copyright(c) \(.*\) Intel Corporation. All rights reserved./Copyright (c) Intel Corporation./'
Change-Id: I3779f404966800709024eb1eb66a50068af2716c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
1 Add new API nvme_ctrlr_is_feature_supported().
2 Add unit test for new API.
Change-Id: Ia6d8710755c3b13984fca9d56700efe043be1402
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
This will allow replacing these _nvme_fail_request_bad_vtophys() calls
with the correct error later. vtophys is not actually used within the
SGL request builder, so this is the wrong error.
Change-Id: Ibc2a3b029a8abad1d563b9df200325d7d64498da
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
No code change, just moved into a function for readability.
Change-Id: I883443c06d961c6dbeffed1a6fb153177e6e3fcd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This cleans up the I/O splitting code somewhat.
It also moves the SGL payload function pointers up into the hot cache
section of struct nvme_request without pushing the other important
members past the cacheline boundary (because payload is now a union).
Change-Id: I14a5c24f579d57bb84d845147d03aa53bb4bb209
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
A namespace indicates support for reservations by reporting a non-zero
value in the Reservation Capabilities field in the Identify Namespace
data structure, and controller indicates support for reservation in the
Identify Controller data structure, Here we used namespace field as the
support flag.
Change-Id: I0e1e29548aa3fc8b6d3bbeb4149ec4864316f092
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Support for the Force Unit Access and Limited Retry
bits on reads and writes.
Change-Id: I9860848358377d63a967a4ba6ee9c061faf284d4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This patch is used to wrap the inner implementation
of libpciaccess and prepare for the same interface
to applications in the future patch
Change-Id: I4d40fae0bd86b451ed38dbfd9bcc015f9bfc8436
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
NVMe reservations provide capabilities that may be used by two or more
hosts to coordinate access to a shared namespace, here we add the 4
reservation commands: reservation register/acquire/release/report.
Change-Id: Ib03ae2120a57dd14aa64311a6ffeb39fda73018c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
For the purpose to support different types of input scattered payloads,
such as iovs or scattered list, we define common method in the NVMe
driver, users should implement their own functions to iterate each
segment memory.
Change-Id: Id2765747296a66997518281af0db04888ffc4b53
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Change nvme_ctrlr_is_log_page_supported() to match
nvme_ctrlr_cmd_get_log_page().
Change-Id: I4c8a1f11044b083f8f8990ef40a4f789fa3c24e3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Request allocation may fail, so we need a way to indicate failure to the
caller.
Change-Id: I278c3f42e4d2fa1902bb0ab33ad3bf7c7007fd0d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
1 Add supported log pages data structure.
2 Bulid up supported log pages when NVME start.
3 Provide unified API for getting log pages.
3 Unit test suit optimization base on above modification.
Change-Id: I03cdb93f5c94e6897510d7f19bc7d9f4e70f9222
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Use /sys/bus/pci/devices/.../driver to determine which driver is loaded
for a particular device.
Change-Id: I5859a776e524033e1c6d6ec3796b7e11bdcf0bc4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This more accurately represents what function it performs.
Also remove pci_device_has_uio_driver() from the public API. Callers
should use pci_device_has_non_uio_driver() instead.
Change-Id: I9623fe1345b43e981d5823804e33d01ac0d3bb1c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
nvme_ctrlr_process_io_completions() and
nvme_ctrlr_process_admin_completions() now return the number of
completions processed.
This also adds the possibility of returning an error from the
process_*_completions functions (currently unused, but this at least
gets the API ready in case error conditions are added later).
Change-Id: I1b32ee4f2f3c1c474d646fa2d6b8b7bbb769785f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This ensures that any uninitialized fields are 0/NULL so if
ioat_channel_start() fails, ioat_channel_destruct() will not try to free
bogus pointers.
Change-Id: I99278c9fa280cbcdf3f7448e77db3ac98b59cdd6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Previously, if nvme_allocate_request() failed in
nvme_ctrlr_construct_and_submit_aer(), there was no error checking, so a
NULL pointer would be dereferenced.
Add a return value to nvme_ctrlr_construct_and_submit_aer() so we can
signal failure to the caller. This can only really be reasonably
handled during initialization; when resubmitting a completed AER later,
there is nowhere to report failure, so the AER will just remain
unsubmitted.
Change-Id: I413eb6c21be01cd9a61e67f62f2d0b7170eabaa3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The ioat library currently only supports DMA copy operations, but the
hardware can do other types of transfers. Add a union of the hardware
descriptor structures to enable support for the other operations in the
future.
Also add a generic hardware descriptor type to allow access to the parts
of the descriptor that are common between all types.
Change-Id: I3b54421ce771f58b78910e790b53026f311f918e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
According to the specification, the dataset management for deallocate
attribute can support to 256 ranges, so we should use uint16_t
instead of uint8_t as the ranges parameter.
Change-Id: Ibacc00da8b4b9e2b2f3454d382aadf7ad353ff31
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The parent field is no longer used in the normal (non-split) I/O path,
so move it down to the default-uninitialized part of struct nvme_request
that is only touched for parent/child I/O.
This also puts it closer to other related fields (children,
child_tailq, parent_status) for improved readability.
Change-Id: I120df1df0c967d2f74daa6e97c0bc83626e3be7f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
nvme_qpair_submit_tracker() and nvme_qpair_manual_complete_request() are
only used from within nvme_qpair.c, so they can be static.
nvme_qpair_submit_tracker() is moved up to avoid needing a declaration
(no other code change).
nvme_ctrlr_hw_reset() is only used from within nvme_ctrlr.c, so it can
be static.
Change-Id: I9a7953d7baaec76e875dd535daf557ea24bef801
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
These delays are left over from early development. They are completely
unnecessary and not based on anything in the NVMe spec.
Startup time should be slightly improved (on the order of 100 ms in
normal cases).
Change-Id: I9068b1a0f42feabcfe656d68be91e05a56cc53a3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This lets us signal an error if the channel is halted in
ioat_process_channel_events().
Change-Id: Iffaf4fd1e27d1254f9d95a37d732ae4a5f3a0465
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Rather than individually allocating each ring entry, use two large
allocations, one for the hardware descriptors and one for the software
descriptor contexts.
This allows the use of simple array indexing on the rings and also
allows the removal of most of the software descriptor structure,
since the necessary information can be retrieved based on the ring
index now.
Change-Id: I73ef24450f69ca0fc35e350286282c6b1c77a207
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
NVMe doesn't require the specific 64-bit MMIO ordering on 32-bit
platforms performed in spdk_mmio_read_8(), but it doesn't hurt.
We have to pick one of the two possible orderings, so pick the one
required by I/OAT.
Change-Id: I2b909d64d0c077b797d0f64a11d78d1ecc55eec7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
