An esnap clone is now deletable when its external snapshot is missing.
Likewise, the tree of degraded lvols rooted at a degraded esnap clone
can also be deleted, subject to the normal restrictions.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I711ae25d57f5625a955d1f4cdb2839dd0a6cb095
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17549
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This introduces an examine_config callback that triggers hotplug of
missing esnap devices.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I5ced2ff26bfd393d2df4fd4718700be30eb48063
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16626
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
A subsequent patch will need to use dirname(3), declared in libgen.h.
Because libgen.h is a POSIX header, the SPDK build requires that it is
defined in spdk/stdinc.h, not in the file that needs it.
libgen.h also declares basename() which has a conflicting declaration in
string.h. A small change is required in bdev_uring_read_sysfs_attr() to
accommodate this.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Ib4ded2097881668aabdfd9f1683f933ce418db2e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17557
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If an esnap clone is missing its snapshot the lvol should still open in
degraded mode. A degraded lvol will not have a bdev registered and as
such cannot perform any IO.
Change-Id: I736194650dfcf1eb78214c8896c31acc7a946b54
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16425
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This replaces nested if statements with equivalent logic that uses
early returns. Now the code fits in 100 columns and will allow the next
patch in this series to avoid adding a fifth level of indentation.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Ief74d9fd166b2fe1042c78e12fe79d5f325aa502
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17548
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This provides information about logical volumes without providing
information about the bdevs. It is useful for listing the lvols
associated with specific lvol stores and for listing lvols that are
degraded and have no associated bdev.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I795161ac88d9707831d9fcd2079635c7e46ecc42
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17547
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add RPC interfaces for creation of esnap clone lvols. This also
exercises esnap clone creation and various operations involving
snapshots and clones of esnap clones to ensure that bdev_get_bdevs
reports state correctly.
Change-Id: Ib87d01026ef6e45203c4d9451759885a7be02d87
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14978
Reviewed-by: Michal Berger <michal.berger@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This adds the ability for create esnap clone lvol bdevs.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Ifeef983430153d84d896d282fe914c6671283762
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16590
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Register an spdk_bs_esnap_dev_create callback when initializing or
loading an lvstore. This is the first of several commits required to add
support enable lvol bdevs to support external snapshots and esnap
clones.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I35c4e61fdbe5b93d65b9374e0ad91cb7fb94d1f4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16589
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If an lvol is opened in degraded mode, keep track of the missing esnap
IDs and which lvols need them. A future commit will make use of this
information to bring lvols out of degraded mode when their external
snapshot device appears.
Change-Id: I55c16ad042a73e46e225369bfff2631958a2ed46
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16427
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
DAOS bdev was implicitly expecting `container_of` to be in daos_event.h
With upcoming DAOS release the location of `container_of` has changed.
`SPDK_CONTAINEROF` is now used in the module.
Signed-off-by: Denis Barakhtanov <denis.barahtanov@croit.io>
Change-Id: Ia88365322fef378af6b1708b8704827bca1b828d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17719
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There is heap-use-after-free error when detaching a controller
when "io_path_stat" option set as true.
(if build spdk without asan ubsan, error is free(): corrupted
unsorted chunks)
It's because io_path is accessed in bdev_nvme_io_complete_nvme_status
after the io_path is freed.
io_path is freed when we detach the controller in function
_bdev_nvme_delete_io_path, this function will execute 1 and 2.
And before 4 is executed, 3 may be executed which accesses io_path.
1.spdk_put_io_channel() is called. bdev_nvme_destroy_ctrlr_channel_cb
has not been called.
2.free(io_path->stat); free(io_path);
3.bdev_nvme_poll; nbdev_io1 is success; bdev_nvme_io_complete_nvme_status()
access nbdev_io1->io_path.
4.bdev_nvme_destroy_ctrlr_channel_cb disconnect qpair and abort nbdev_io1.
This patch fixed this by moving 2 down under 4. We don't free io_path in
_bdev_nvme_delete_io_path but just remove from the nbdev_ch->io_path_list.
The processes to reproduce the error:
target: run nvmf_tgt
initiator: (build spdk with asan,ubsan enabled)
sudo ./build/examples/bdevperf --json bdevperf-multipath-rdma-active-active.json -r tmp.sock -q 128 -o 4096 -w randrw -M 50 -t 120
sudo ./scripts/rpc.py -s tmp.sock bdev_nvme_detach_controller -t rdma -a 10.10.10.10 -f IPv4 -s 4420 -n nqn.2016-06.io.spdk:cnode1 NVMe0
========
bdevperf-multipath-rdma-active-active.json
{
"subsystems": [
{
"subsystem": "bdev",
"config": [
{
"method":"bdev_nvme_attach_controller",
"params": {
"name": "NVMe0",
"trtype": "tcp",
"traddr": "10.169.204.201",
"trsvcid": "4420",
"subnqn": "nqn.2016-06.io.spdk:cnode1",
"hostnqn": "nqn.2016-06.io.spdk:init",
"adrfam": "IPv4"
}
},
{
"method":"bdev_nvme_attach_controller",
"params": {
"name": "NVMe0",
"trtype": "rdma",
"traddr": "10.10.10.10",
"trsvcid": "4420",
"subnqn": "nqn.2016-06.io.spdk:cnode1",
"hostnqn": "nqn.2016-06.io.spdk:init",
"adrfam": "IPv4",
"multipath": "multipath"
}
},
{
"method":"bdev_nvme_set_multipath_policy",
"params": {
"name": "NVMe0n1",
"policy": "active_active"
}
},
{
"method":"bdev_nvme_set_options",
"params": {
"io_path_stat": true
}
}
]
}
]
}
======
Change-Id: I8f4f9dc7195f49992a5ba9798613b64d44266e5e
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17581
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
The target subsystem may expose more than 128 namespaces. To support
such subsystem, add a new parameter max_bdevs for the
bdev_nvme_attach_controller RPC.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I8fab20b9c4d52818205e05de6a31dbe0d31a10fe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17651
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This file should be external to enable out-of-tree accel modules.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I2e973d0e88d7145d0fc9714f56db48486b00f3b7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17419
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_bdev_queue_io_wait() can only be used when one of bdev submission
functions returns ENOMEM (i.e. there are no more spdk_bdev_ios on that
IO channel). Using it in any other case, e.g. on spdk_accel_append_*()
returning ENOMEM, will most likely result in failure. Therefore, to
avoid that, the IOs are completed with NOMEM status relying on the bdev
layer to retry them.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ie0f03496e5d3180c481815b3f1b021e74ae2f46d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17319
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This actually allows malloc bdev to chain multiple accel operations
together. And, since the last operation will always be a copy, accel
should remove that copy by modifying previous operation's dst/src.
On my system, it improved bdevperf performance (single core, qd=4,
bs=128k, bdev_crypto on top of bdev_malloc, crypto_sw):
randread: 5668M/s -> 8201M/s
randwrite: 5148M/s -> 7856M/s
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I5b9173fa70a42ee56f56c496a34037d46d2f420f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17202
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Because the copying is handled by accel, which will do push/pull when
necessary, we can report support for each registered memory domain.
Also, since verifying PI information would require doing a push/pull, we
don't report support for memory domains if bdev has DIF enabled.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Id80f82aaac68e9dec2a6cae81d96a460105161d6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17201
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Same reason for the change as in bdev_malloc_readv().
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Id52d8639df6a488342346283c90f12a2ba6f5736
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17199
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This only changes the interface bdev_malloc uses for scheduling the copy
to appends, but it won't chain those copies to an existing sequence, as
bdev_malloc doesn't report support for accel sequences yet. That will
be changed in one of the subsequent patches.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I6db2c79b15cb96a1b07c6cf5514004c76b9d2e92
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17198
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
It reduces the size of the parameter list, which was already pretty
long, and will make it easier to use other bdev_io's fields (e.g. memory
domain, accel sequence).
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I43a9d3a7cbb77915c00879c43540c9ec725c52d2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17197
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If a request was marked as failed, we don't want to retry it, so we
shouldn't override its status with NOMEM.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I85a522a7934d2d6f415620b9a323effefb91f299
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17196
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It gets rid of lots of casts to malloc_task/malloc_disk and makes the
code more readable.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Id50f0cbfa18adf5e7baafd58da03d290d6ba62c6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17195
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Not all raid modules may support memory domains - raid5f currently does
not. Add a parameter to struct raid_bdev_module to specify that.
Change-Id: I3285c118db846d290837606b3f85ac4b5277de97
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17601
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Ensure no ephemeral bdev will generate its own UUID,
unless this value has been specified via RPC.
Generation is now being done by the bdev layer itself.
Change-Id: I11efe819a28a137b738959a96a7bdf8c79cfaf64
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17109
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Make sure UUID can be passed to raid bdev type during
its creation.
Change-Id: I5fa9ca2d18d435fa882e1cb388b2e1918d821540
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17136
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Make sure UUID can be passed to error bdev type during
its creation.
Change-Id: I80b9c1b938a464c0cc8c61f871ae2044d8e09dfd
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17107
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
this add output when execute save_config function
Signed-off-by: Tim Zhang <hgmz371@gmail.com>
Change-Id: Ib465dc424beb691e86425878588bb732574fc9b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16097
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Unset the write_cache as the uring bdev does not support Flush I/O.
Signed-off-by: Krishna Kanth Reddy <krish.reddy@samsung.com>
Change-Id: I8e6fce26b12176a7c77c40a1c9102be5cb72e358
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12900
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This OCF update is mainly focused on:
- New volume API
- New cache attach config instead of old cache device config
- UUID moved to different struct
- Persistent metadata is not supported due to metadata flapping (see 689c44c76ba87f80a9538c17220bb9ca6bffdda0 in OCF)
Signed-off-by: Amir Haroush <amir.haroush@huawei.com>
Signed-off-by: Shai Fultheim <shai.fultheim@huawei.com>
Change-Id: Ic3bc0f1b58550dc3b03b0afc9bcb43b2b9b988c6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17066
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Robert Baldyga
Remove unused cleaner IO queue which is not kicked on creation.
While it is not a problem to have it,
the latest OCF code has new parallelize mechanism that uses all the IO queues.
Using an IO queue which is not kicked will hang the system.
After this change SPDK glue is somewhat closer to OCL glue,
both not using a dedicated cleaner IO queue.
Signed-off-by: Amir Haroush <amir.haroush@huawei.com>
Signed-off-by: Shai Fultheim <shai.fultheim@huawei.com>
Change-Id: I2e8ef0aaf11061d511151865c6062922d7934df2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17065
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Inline the internal of bdev_nvme_delete_ctrlr() and bdev_nvme_failover()
into _bdev_nvme_delete().
Change the _nvme_ctrlr_destruct() call from direct to message passing
to reduce lock hold time and avoid potential deadlock.
Then, protect nbdev_ctrlr via g_bdev_mutex_unlock and each nvme_ctrlr
via nvme_ctrlr->mutex.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I5cc2cf781d2846c51bce631c12fceaeade860a0b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16822
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If we find that the discovery entry already exists, a
single break doesn't work - that just breaks out of
the TAILQ_FOREACH. So instead change it to free
the resolver object and return directly.
Fixes issue #2945.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia31d6ecfa4fdc0a168eecc8ec4659da10a870770
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17209
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
The code was already ready for that, so it's only a matter of reporting
that to the bdev layer.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I46ea2e6794e00590930651c5ff8c36588de641b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17042
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Now that all crypto operations are using interfaces that support memory
domains, bdev_crypto can report support for memory domains.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I13a128a599f6560197fed3405599c2a6bb609703
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17041
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
There are lots of places when we need to abort accel sequence and
complete bdev_io with a failed status, so move that code to a dedicated
function.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I5f6f4146c736d9c8e04b5667117d6e7ed824a654
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17088
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
All these callbacks look identical now, so there's little point in
having three different functions doing the same thing.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I60d1426b5d2b20d924776699885e6a9dd176504a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17024
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
After changing to spdk_accel_append_*, this code is no longer necessary,
as accel operations are now executed by the base bdev/bdev layer.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I2e31249dfdf7abeee420744a5cc75b8273ecbad9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17023
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Similarly to reads, writes path is now also using the spdk_accel_append*
interface for performing encrypt operation.
Additionally, this patch also changes the way aux buffer is allocated -
spdk_bdev_io_get_aux_buf() was replaced with spdk_accel_get_buf(). This
ensures that the actual data buffer will be only allocated if it's
actually needed.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I3cd1d4f5753a95709d7b81de23d9227102a74261
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17022
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
The new spdk_accel_apend_decrypt() interface is now used for all read
requests for decrypting data. This makes it possible to chain decrypt
operations with other operations in a sequence. Support for encryption
in the write path will be added in the following patches.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I2f65044eeaf92232d839ddd166ae50889b3f386d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17021
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Removed bdev pmem implementation and makefiles
Removed bdev pmem rpc calls
Updated Python scripts
Updated match files for tests
Updated doc files
pkgdep and doc files will be updated when pmem
dependency is removed from libreduce
Change-Id: Ia1be5046159e04cd933ac13a0d5791e6d28219da
Signed-off-by: Marcin Spiewak <marcin.spiewak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17070
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Huawei is working on picking up support for OCF and the
associated SPDK bdev module, after Intel discontinued
support. So clarify various docs and strings to
reflect this for now. If everything goes according
to plan, deprecation notice will get removed before
23.05 release. If not, SPDK will just keep the
deprecation notice for 23.05, keep the code in-tree,
and give another release cycle to get things worked
out.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9ac6bf2f509005956440b41516ca00b0c1997361
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17085
Community-CI: Mellanox Build Bot
Reviewed-by: Amir Haroush <amir.haroush@huawei.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch aligns delay bdev with other bdev modules
that allow passing specific uuid during their creation.
See malloc or null bdev modules.
Change-Id: Icc5e816dd42b2e55e8d57712f2d4f125e486fdab
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16840
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Patch 55f947933 ("bdev: remove spdk_bdev_ext_io_opts from spdk_bdev_io")
changed the way bdev_nvme submits IO to the NVMe driver causing
performance degradation for requests with iovcnt = 1, as they also had
to go through the path that executes the reset_sgl/next_sge callbacks.
This patch reverts those changes back to the original code checking
iovcnt and using the non-SGL functions if possible.
Suggested-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I5e7c6620d38b7690ff862d8cd0075afacc578217
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16961
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
With bdev_nvme accel_comp_poll is always created, even if it is not
really used e.g bdev_nvme with vfio-user transport.
accel_comp_poll poller is registered when accel_channel is created, in
order to start it lazily this patch creates accel_channel during first
usage.
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Change-Id: I5c710a038606ada00c9bfde6a4d9691ee8f6d204
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16957
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
`rpc_bdev_lvol_resize` and `rpc_bdev_lvol_create` can now use size
in MiB instead of `size` in bytes. This change make param `size`
deprecated and using both `size` and `size_in_mib` return error.
Since `bdev_lvol_resize` and `bdev_lvol_create` use size in MiB,
name of param should reflect it, previously used param `size` is
positional therefore there is no need to keep it as deprecated.
This patch fix issue: #2346
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: Ibbe2c056bb63d9f82dee91c87fdd501ce441d5f8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16901
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change the way we generate UUIDs to use uuid_generate_sha1()
from libuuid.
Fixes#2788.
Change-Id: Id750a7de74fb37bc3ab3ab06b3254b49d73f4be3
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15935
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
