These statistics can help to estimate efficiency of
Work Requests batching and show busy/idle polls ratio.
Send: the doorbell updates statistics for verbs
provider are incremented per each ibv_post_send call,
for mlx5_dv per each ibv_wr_complete call.
Recv: the doorbell updates statistics for both
providers are updated when either ibv_post_recv
or ibv_post_srq_recv functions are called.
Each qpair on initialization accepts an optional
pointer to shared statistics (nvmf/nvme poll groups).
If the pointer to statistics is not provided then
qpair allocates its own structure. That is done
to support cases when NVME RDMA initiator doesn't
use poll groups, so we can avoid checks that qpair
has statistics in IO path
Change-Id: I07dea603cb870b85ea23c42e8e2c4520b1c66252
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6293
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This change follows the large read which submits only subtasks, and
simplifies large write cases.
Associate the PDU which sends a SCSI Write PDU with immediate data
with both the primary task and the first secondary task. Then stop
incrementing reference count of the primary task twice.
As same as the last patch, copy the failure status directly among
the primary task and the secondary tasks because the primary task
is not submitted now. Then remove related data from struct
spdk_iscsi_task and related helper functions from conn.c.
Finally simplify unit tests for process_non_read_task_completion().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I54aa38c9b9fb7d7352da040dcdd8bcc1b1756a83
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6344
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For the following nvme controller statemachine states:
NVME_CTRLR_STATE_IDENTIFY_NS
NVME_CTRLR_STATE_IDENTIFY_ID_DESCS
NVME_CTRLR_STATE_IDENTIFY_NS_IOCS_SPECIFIC
The statemachine can either:
- Jump to succeeding state
- If active ns list is empty, jump directly to NVME_CTRLR_STATE_CONFIGURE_AER
- In the unlikely case if NVMe completion error, jump to NVME_CTRLR_STATE_ERROR
Simply this such that we either:
- Jump to succeeding state
- In the unlikely case if NVMe completion error, jump to NVME_CTRLR_STATE_ERROR
This will help to reduce the complexity of the nvme controller statemachine,
especially considering that there are new additional states
(NVME_CTRLR_STATE_IDENTIFY_NS_DIRECTIVE and
NVME_CTRLR_STATE_CONFIGURE_NS_STREAMS) currently on review that would continue
with the bad habit of having three possible jump states instead of just two.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I3242052b1108afcd8adbe6d0378b1358fef58ec8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6521
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: sunshihao <sunshihao@huawei.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
bus_pci depends on pci so it shall be listed before, otherwise it can
result in linking issue e.g.
/usr/bin/ld: /home/jkalwas/spdk/dpdk/build/lib/librte_bus_pci.a(bus_pci_pci_common.c.o): in function `pci_parse':
pci_common.c:(.text+0x6e): undefined reference to `rte_pci_addr_parse'
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Idff446df82c37844edc122d5171e8ffa684b296f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6404
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Purpose: To get the optimal group, we need the socket information.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I17b048a402fbf002307dd225f64b20a9f876d642
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3324
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
This patch is used to leverage accelerated engine to compute
the data digest in the following case:
1 DIF is not used.
2 The data to compute is aligned with size 4, i.e, %4 = 0.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I51fb6e3ab04391062b244cba6e249c8e20d3180f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6014
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch added the chained crc32 support API for both batched
and non batched mode usage. And also update the accel_perf
program in order to use the revised accelerated crc32 function.
For example, you can use the following command:
./build/examples/accel_perf -C 4 -q 128 -o 4096 -t 5 -w crc32c -y
In this command, "-C 4" means that caculate the chained
crc32 for an iov array.
(even if you do not have the accelerated DSA hardware)
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ifede26f9040980b5791da8e5afef41177eede9f6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6457
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For a SGL using PRPs, there is always an alignment check of the start
address in the beginning of the loop. This is stored in start_valid.
If the start is indeed valid, we might fetch a new SGE,
and then perform a second alignment check on this new SGE.
However, this second alignment check is done unconditionally,
meaning that for the last SGE in a request, we check if the
same start address is aligned twice.
Only perform the second alignment check if we actually fetched
a new SGE.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I9df8038c650b0879f838d1d9d895e8dd7172840d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6493
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The statement causes this issue is:
assert(group_impl->num_removed_socks < MAX_EVENTS_PER_POLL);
The call trace is:
The previous solution is:
commitid with: e71e81b631
But with this solution, it will always add the sock
into the removed_socks list even if it is not under polling
context by sock_group_impl_poll_count. So it will exceed the size of
removed_socks array if sock_group_impl_poll_count function will not be
called. And we should not use a large array, because it is just a workaround,
it just hides the bug.
So our current solution is:
1 Remove the code in sock layer, i.e., rollback the commit
e71e81b631. This patch is
not the right fix. The sock->cb_fn's NULL pointer case is
caused by the cb_fn of write operation (if the
spdk_sock_group_remove_sock is inside the cb_fn). And it is not
caused by the epoll related cache issue described in commit
"e7181.." commit, but caused by the following situation:
(1)The socket's cb_fn is set to NULL which is caused by
spdk_sock_group_remove_sock by the socket itself
inside a call back function from a write operation.
(2) And the socket is already in the pending_recv list. It is
not caused by the epoll event issue, e.g., socket A changes Socket B's
cb_fn. By the way, A socket A should never remove a socket B from a polling group.
If it really does it, it should use spdk_thread_sendmsg to make sure
it happens in the next round.
2 Add the code check in each posix, uring implementation module.
If sock->cb_fn is NULL, we will not return the socket to the active socks list.
And this is enough to address the issue.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I79187f2f1301c819c46a5c3bdd84372f75534f2f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6472
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add a function to get the number of max active zones for a zoned
namespace.
The value inside the identify namespace struct is a 0's based value,
where 0xffffffff means unlimited.
If unlimited, the addition will overflow and return 0,
which is the intended value to represent unlimited for this API.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ia09e3db157ca0afadbd3ca4032eedd7bcd88248c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6443
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: sunshihao <sunshihao@huawei.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add a function to get the number of max open zones for a zoned
namespace.
The value inside the identify namespace struct is a 0's based value,
where 0xffffffff means unlimited.
If unlimited, the addition will overflow and return 0,
which is the intended value to represent unlimited for this API.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I4223146bc1ddf90486892a0af5fe5ce006dc5fd3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6442
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: sunshihao <sunshihao@huawei.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch provides two new accelerated crc32c function interface.
And the next patch will be used to add the real support of chained crc32c feature.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I3f8dd55c3da636e29e5fb02fc229b51f05653cd6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6456
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When read is split, only secondary tasks are submitted. Hence we can
copy the failure status directly among secondary tasks and primary
task now.
Additionally, improve the comment in the source code to make us easier
to understand.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I857711dfaf90515231048f8c31c9273eac854d28
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6343
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
This will make the current code simpler and make the following changes easier.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5a06f7e876fee03ed05d880525b594f92cadcdca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6410
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
data_buf was duplicated with data and was not necessary. Hence
remove it and use data instead in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I207047ce73d938f83e39f1454d44a9e4bba6b2f7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6407
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
This patch follows the last cleanup.
Factor out reading PDU payload operation from iscsi_read_pdu() into a
helper function iscsi_pdu_payload_read(). This reduces the nesting
level, improves the readability, and make the following patches easier.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie5f51eedefe00f3b43a7b45dcf84be79f8df4e27
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6414
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
For the logic in ISCSI_PDU_RECV_STATE_AWAIT_PDU_PAYLOAD case,
this change will make it easier to read.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Iccc582dd5c749c60b3d22b2b9b73fb8407e59b0d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6360
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK block devices can only be resized up when
it is open. So there is no need to pause the
associated namespace itself when resized - just
pausing the subsystem is enough.
Also modify the ns_hotplug_test to do null bdev
resizing - this will help test this resize code path.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3cb7b9de0892c296f2abf2280bed434d18ebe6b5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6467
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Provide a default stub definition for spdk_pci_device_claim/unclaim
for non-linux platforms, rather than just for FreeBSD.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: Ica45d967878582d9a58e37b088eba4bf0d94104e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6464
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
In _set_thread_name, use pthread_setname_np as the default for
platforms that are not Linux or FreeBSD; it's the most common
'non-portable' pthread extension used to set the thread name.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: Ia841166f0537cd1303eded15bc7ef1a9f03e3b6e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6465
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
bdev channel is used in nbd fini process, so it should
be released in the latter part of nbd_stop
Change-Id: I87edea63d2d91954cc41cdb71261485ae24c0d9f
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6280
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Similar issue was fixed in
813869d823
nvmf: Fix possible race condition when adding IO qpair
This patch fixes the same issue which occurs a bit later,
when a message is delivered to another thread. This issue
occurred on CI, callstack is the following:
00:11:46.296 #6 0x00007f2705199f05 in __ubsan_handle_type_mismatch_v1 () from /lib64/libubsan.so.1
00:11:46.296 No symbol table info available.
00:11:46.296 #7 0x00007f27067ace6f in ctrlr_add_qpair_and_update_rsp (qpair=0x221edc0, ctrlr=0x1dc4ea0, rsp=0x2242918) at ctrlr.c:230
00:11:46.296 __PRETTY_FUNCTION__ = "ctrlr_add_qpair_and_update_rsp"
00:11:46.296 __func__ = "ctrlr_add_qpair_and_update_rsp"
00:11:46.296 #8 0x00007f27067b1d0b in nvmf_ctrlr_add_io_qpair (ctx=0x2242540) at ctrlr.c:534
00:11:46.296 req = 0x2242540
00:11:46.296 rsp = 0x2242918
00:11:46.296 qpair = 0x221edc0
00:11:46.296 ctrlr = 0x1dc4ea0
00:11:46.296 __func__ = "nvmf_ctrlr_add_io_qpair"
00:11:46.296 #9 0x00007f27062553ce in msg_queue_run_batch (thread=0x1cff540, max_msgs=8) at thread.c:553
where line 230 in ctrlr.c was
assert(ctrlr->admin_qpair->group->thread == spdk_get_thread());
That means that admin qpair was disconnected from the poll
group and controller is in the process of destruction
Change-Id: I818ba56adda5ed3488a8df78483c0b6839758192
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6364
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We already have support for spdk_nvme_zns_zone_append(),
add support for spdk_nvme_zns_zone_appendv() (zone append with
NVME_PAYLOAD_TYPE_SGL).
_nvme_ns_cmd_rw() currently performs verification of the SGL,
if the parameter check_sgl is set. This parameter is set for all
calls with payload of type NVME_PAYLOAD_TYPE_SGL.
In order to be able to perform the same check_sgl verfication on
zone append vectors, we need to refactor _nvme_ns_cmd_rw() a bit.
Setting check_sgl ensures that _nvme_ns_cmd_split_request_sgl() or
_nvme_ns_cmd_split_request_prp() gets called.
These functions will split an oversized I/O into several different
requests. However, they also iterate the SGE entries, verifies that
the total payload size, total SGE entries is not too many, and that
buffers are properly aligned. A proper request will not get split.
For zone append, splitting a request into several is not allowed,
however, we still want the verification part to be done, such that
(e.g.) a non first/last SGE which is not page aligned, will cause
the whole request to be rejected.
(In the case of spdk_nvme_ns_cmd_write(), a non first/last SGE which
is not page aligned will instead cause the request to be split.)
An alternative would be to try to rip out the verification part from
_nvme_ns_cmd_split_request_sgl() and _nvme_ns_cmd_split_request_prp().
However, that is non-trivial, and would most likely end up with a lot
of duplicated code, which would easily get out of sync.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I2728acdcadeb70b1f0ed628704df19e75d14dcca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6248
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use the new function spdk_nvme_zns_ns_get_zone_size_sectors() where
it is appropriate (in comparison to the existing
spdk_nvme_zns_ns_get_zone_size() variant).
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ic929ffbc5a1f4a16ba6719a985c05ae625caed46
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6417
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Sometimes it is more optimal to get the zone size in number
of sectors, instead of in number of bytes.
Therefore, add a new spdk_nvme_zns_ns_get_zone_size_sectors()
function to get zone size in number of sectors.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I0fe67e00a3d74dd27acfc895ae97448d995b89a3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6416
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In order to make sure we do always response to the kernel module if
there are valid commands in the socket. If we do not see this,
we will see stuck request kernel info in nbd module. And the kernel
will print the timeout message of nbd module again and again.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I2ecc3e9c948231a712778f0126e2ecc6220e1d3c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6276
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
The current implementation treats HPDA/CPDA as the absolute offset
to the beginning of the PDU where the payload data starts. This is
incorrect. The HPDA/CPDA actually specify where the payload data
should start such that the starting location is a multiple of HPDA
(for C2H PDU) or CPDA (for H2C PDU or CapsuleCmd PDU).
The other issue fixed is that the current implementation calculates
padding only when header digest is enabled. This is also incorrect.
Signed-off-by: Wenhua Liu <liuw@vmware.com>
Change-Id: If7a3896a4c1d73f6d062bd3dbe6a912d31771180
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6256
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
For correct behaviour, pthread_mutex should not be locked after it has
been destroyed.
g_bdev_mgr.mutex is statically initialized. It is destroyed in
bdev_mgr_unregister_cb, but not re-initialized in spdk_bdev_initialize.
Repeated calls to initialize/unregister occur during unit tests.
Remove the destroy from bdev_mgr_unregister_cb, which seems
the simplest way of resolving the issue.
The sequence: spdk_put_io_channel(), spdk_bdev_close(),
spdk_bdev_unregister() occurs during unit tests.
spdk_bdev_unregister() destroys internal.mutex which is then
locked by a call to bdev_channel_destroy() resulting from the
earlier spdk_put_io_channel(). Move the destroy and the free of
internal.qos into bdev_destroy_cb so that they don't occur until
all of the channels have been released. Remove the no longer
required bdev_fini.
Repeat calls to spdk_bdev_unregister that occur after an unregister has
completed will lock internal.mutex which has been destroyed by the
previous unregister. This occurs during unit tests. Defer locking
internal.mutex until after the internal.status has been checked for
SPDK_BDEV_STATUS_REMOVING. This is the only place where
internal.status is set to removing and g_bdev_mgr.mutex alone is
sufficient to ensure atomicity here.
Tested with a pthreads library that contains debugging code to
check the mutex state and a modified version of bdev_io_types_test
to call get_io_channel on a different thread.
Suggested-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: I81cc46a1b8a766700253829b19cc86c7f0eb79f2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6217
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Vhost is enabled by default, so rte_net was always included.
When disabled, rte_power failed as it depends on rte_ethdev and rte_net.
rte_vhost was only possible to enable on Linux, so there
is no conflict with adding it next to rte_power under this condition.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I2e183004d6457e404471740a0540dcb08aa738d8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6398
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Nick Connolly <nick.connolly@mayadata.io>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Identify application prints the PMR details if it is supported
Signed-off-by: Krishna Kanth Reddy <krish.reddy@samsung.com>
Change-Id: Iaba4c15e18e1402035b11a34b2defe8078855751
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6209
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In dpdk 19.11 version, RTE_VHOST_USER_ASYNC_COPY is not define.
After dpdk 20.08, we can use RTE_VHOST_USER_ASYNC_COPY.
Use version check to avoid this problem.
Signed-off-by: sunshihao <sunshihao@huawei.com>
Change-Id: Iaf9914e8380f3d54cded1e2f16af6a7dc3504f95
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6274
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
There is a special case when using 8-byte metadata + PI + PRACT
where no metadata is transferred to/from controller.
Since _nvme_ns_cmd_rw() already calculates the proper sector size
using _nvme_get_host_buffer_sector_size(), which takes PRACT into
account, change the sectors_per_max_io calculation to also take
PRACT into account.
This will avoid certain requests that don't need splitting getting
split.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I8d450d37c2458453701189f0e0eca4b8fe71173b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6247
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
After setting io timeout, host can avoid nbd io
stuck or kernel hang occasionally caused by nbd
stop or underlying bdev removal.
Change-Id: I4ba2a0af7ff7bed369cdaf86121f082136dc1a0b
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6191
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Aspects of bit fields are 'implementation defined'. On some platforms
alignment will occur if two adjacent fields are of different types. This
occurs in spdk_nvme_feat_async_event_configutation after the crit_warn
member which is effectively an int8_t, followed by an int16_t. There
isn't a generic way of changing the compiler's behaviour, so the best
options are:
- Change crit_warn to a uint32_t bit field and copy the value to/from
a spdk_nvme_critical_warning_state variable to use it. This requires
changes to code using the field.
- Adjust the structure definition to use smaller types to avoid the
problem. This preserves existing semantics, but the field order will
need to be reviewed if big-endian support is ever added (other places
in nvme_spec.h will need similar attention). A second reserved field
is required.
Use smaller types which seems the most straightforward option. Adjust
the use of the spdk_nvme_feat_async_event_configuration reserved fields
in lib/nvmf/ctrlr.c.
The new structure is binary compatible and the fields behave in the same
way, with the exception of an additional reserved field, so updating
CHANGELOG.md probably isn't necessary.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: I7d8163c84b4f410fc95a5b7064506ad7b4b62c6c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6340
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
__builtin_clzl takes an unsigned long argument which may be smaller
than uint64_t on some platforms. GCC silently ignores the mismatch,
returning the wrong answer at runtime. Use __builtin_clzll instead and
add static assertions to detect the issue.
Attribute 'target_clones' requires 'ifunc' support which only applies to
ELF targets. Add check for defined(__ELF__).
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: Iff76640b34223649de531250ad40471d829512c7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6317
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
insert_queue() will copy it to internal data structure, so that
before successful map we don't need to consider the error path.
Change-Id: Id7ea2ef73da7914ea430ea568e7981657016d3f7
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6310
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The CQ is created first, so it's more reasonable to connect
the IO queue pair after creating the SQ.
Change-Id: I196c19a54a015310a3777d9bfca7db8735a4d5b2
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6309
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
