This is part of a larger series enabling failover at the bdev
layer for NVMe.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I0d89e1afab8aeaa90237d0ba780d708154f6e3be
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2881
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
According to the description of io_uring_queue_exit:
Tear down function for io_uring. Unmaps all setup shared ring buffers
and closes the low-level io_uring file descriptor returned by the kernel.
So we should remove the close operatoin on ring fd.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I910c6e8acd935925b7985c2aa750df385004eb55
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2922
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Delay bdev module does not support delaying zcopy I/O. So change
vbdev_delay_io_type_supported() to return false if the passed I/O
type is zcopy to clarify the use case of delay bdev module.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Icea5ae351d7139250710ce491e4ac466b0cc7f98
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2622
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This addition enables us to test the new abort I/O feature on top of
any bdev which supports I/O type ABORT.
Add the abort I/O handler vbdev_delay_abort() into vbdev_delay_submit_request().
vbdev_delay_abort() aborts the target I/O if it is delayed to complete,
or calls spdk_bdev_abort() otherwise.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I191143357b95eeb56ada708d2d7ce30cf772bdcf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2602
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Improve reset I/O to abort all I/Os delayed to complete by parsing
all channels. The generic bdev layer stops new I/O submission during
reset processing. So freezing/unfreezing channels is not necessary.
Additionally, clean up the code which run if I/O submission failed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I63e1ba78971944558d9317b63befecd86a6d6b60
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1993
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Passthrough bdev module sets the passed bdev_io to the cb_arg of
the bdev_io submitted to the underlying bdev. Hence call
spdk_bdev_abort() with bdev_io->u.abort.bio_to_abort for the I/O
type ABORT.
Passthrough bdev module returns the supported I/O type of the
underlying bdev. Hence vbdev_passthru_io_type_supported() is not
necessary to change.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifb7627a92409649ab08ae233ba517fbc1bc55a9f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2799
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
As malloc bdev module supports I/O type ABORT, it will be helpful
if any bdev module other than NVMe bdev module supports I/O type
ABORT.
Update bdev_null_io_type_supported() to return true for
SPDK_BDEV_IO_TYPE_ABORT and update bdev_null_submit_request() to
try aborting the target I/O if queued.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4614c48840ef069a11991486d184d45789bc3000
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2798
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Malloc bdev module does not manage submitted I/Os by any list,
and so cannot abort any submitted I/O. However malloc bdev module
can always fail any submitted abort request.
Hence let's update bdev_malloc_io_type_supported() to return true
for SPDK_BDEV_IO_TYPE_ABORT and update _bdev_malloc_submit_request()
to complete with failure for SPDK_BDEV_IO_TYPE_ABORT.
This will enable us to use delay bdev + malloc bdev to test I/O
abort feature conveniently.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If4c411f5ab8589291ac90c10264d3ef30c06df83
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2797
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Warning:
ctx.c: In function ‘vbdev_ocf_ctx_log_printf’:
ctx.c:503:2: warning: ‘spdk_lvl’ may be used uninitialized in this function [-Wmaybe-uninitialized]
503 | spdk_vlog(spdk_lvl, NULL, -1, NULL, fmt, args);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compiling with ocf module, here should add default.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I645a1044e58b63d5a58fde19baa3c125f97e0a7b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2603
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
crypto_dev_poller() had set IO error to bdev_io->internal.status
but _crypto_operation_complete() checked io_ctx->bdev_io_status
and overwritten bdev_io->internal.status by spdk_bdev_io_complete().
On the other hand, internal fields of struct spdk_bdev_io should
have been avoided.
This patch fixes both.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia3d4887f34fdecc765b88246c3e66ce1871ff30f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1907
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Also, while we are here, consolidate setting SO_SUFFIX to one spot.
Previously, it was possible for a library to slip through
without an SO version.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I4db5fa5839502d266c6259892e5719b05134518c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2361
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The spdk_opal_supported() is redundant with spdk_opal_dev_construct(),
because we only return the spdk_opal_dev structure when the drive
can support OPAL feature.
Change-Id: Ieadf271a0c8530f2440cded05ad139483a8c5937
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2383
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change OCF logger callback to
use spdk_vlog interface,
instead of manually deciding log level and
printing messages to a FILE.
This allows user to modify logging preferences
for OCF without modifying our OCF code.
Change-Id: Ibe526c97965acb9a5e9816446354e3a200d0cc31
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1947
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Put clear behavior of setting flags to funtion vbdev_ocf_mngt_exit.
No need to add an extra funtion any more, so remove it.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Icb5b569ada597b4896523c95ba19abae3f064f4a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2384
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Put these exit behaviors into one function.
Make this more readable.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Ifd7a74910847dffd3d8c6c6db61e6e1fc7a8d779
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2283
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The spdk_opal_supported() is redundant with spdk_opal_dev_construct(),
because we only return the spdk_opal_dev structure when the drive
can support OPAL feature.
Change-Id: I2a8b70aa92828cf60d168dcf2985759e0eb9a6e3
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2217
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
IO device "bdev_nvme_poll_groups" is not unregistered in the finish
module, so we need to unregister this io device, since the "nvme_if"
is staic variable in bdev_nvme.c, it's can't be accessed in common.c
so we use "g_nvme_bdev_ctrlrs" instead.
Change-Id: Id4675f5acc8f386609903497da5ca84bf8af3a15
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2035
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Purpose: To set the priority of the NVMe-oF connection especially
for TCP connection.
For example, the previous example can be:
trtype:TCP adrfam:IPv4 traddr:10.67.110.181 trsvcid:4420
With the change, it could be:
trtype:TCP adrfam:IPv4 traddr:10.67.110.181 trsvcid:4420 priority:2
The priority is optional. We try to change
spdk_nvme_transport_id but not in spdk_nvme_ctrlr_opts since
the opts in spdk_nvme_ctrlr_opts will reflect in every nvme ctrlr,
this is short of flexibility.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Change-Id: I1ba364c714a95f2dbeab2b3fcc832b0222b48a15
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1875
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Last and only usage of struct lvol_task was removed in
previous patch.
Since it is no longer used, remove the structure itself.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3612106de2ab3a9197245de078c73c53beeff443
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1971
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is no point in setting this value on submission
and changing it on callback.
Since it is based on blob bserrno.
lvol_task is removed in next patch.
This change was motivated by lvol_op_comp() accessing
the task->status pointer on hot path for I/O.
There is no need to do so, so just pass status.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I17461fcf355f771f4de4e6d5ec1900d5042bd3d5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1804
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is always going to be true because of the
context we are in when calling this function, but
add an assert just to be safe.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ifbd075865a191529eb9e656c360f182dba8a85bc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1985
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adjusts several return codes to provide
more than just -1.
Along with fix to json rpc error print,
where negative error code was passed to spdk_strerror().
Resulting in unkown error being reported.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I254f6d716d0ce587f88cc658163ba049378f3b2f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1915
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This was changed to better facilitate thread safety.
In next patch a lock will be held when going over the
cuse devices list.
Now user is expected to pass a buffer of a sufficient size
that will be filled with ctrlr or ns cuse device name.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3202ef285e427111e3595389619463fda58dbef6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1978
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Unregistering nvme_cuse when the device did not exist
resulted in SEGFAULT within nvme_io_msg_ctrlr_unregister().
To prevent that, when no nvme_cuse is registered for the
ctrlr do not unregister nvme_io_msg_producer.
RPC and spdk_nvme_cuse_unregister() now return an error.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id77cebe23ff91023a24cfe091f5f62a76a9175fd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1921
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
All of the error cases for spdk_nvme_transport_id_parse_trtype
were covered earlier, so just make this an assert.
fix kw warning 12653.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: If0eea934764b35d097887b98b0441ae5d7dd3e4f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1953
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
New OCF version is ready, so update our submodule.
There were a lot of API changes so
we need to adjust our bdev/ocf and lib/ocf_env code.
Description of code changes:
- env: added small functions like ENV_BUILD_BUG_ON, env_vzalloc_flags
- env: added "destroy" method for all locks
- env: added "execution context" interface
- cache/core "id" field made private
- signature of "ocf_io_configure" changed
- "io->volume" field made private
List of changes to OCF is available at
https://github.com/Open-CAS/ocf/releases
But no new features were implemented for our
OCF module since 19.6
Change-Id: I1ac2b6db0aad2a9840e4fa73d65608c5638fcb23
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1801
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
I reversed the arguments to abidiff when I first submitted
this test which was causing additions to be reported as removals
and vice versa.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Iac50243f7cda7c1f9c2302af13a34eca844e0689
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1705
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We will be create fine name for each poller but it will need large
effort. Replacing spdk_poller_register by the macro SPDK_POLLER_REGISTER
will provide better name than function address with minimum effort.
Following patches may improve function name for clarification.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If862a274c5879065c3f7cb04dcb5ca7844523e68
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1781
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Community-CI: Broadcom CI
Cache the return value of spdk_io_channel_get_thread() to orig_thread
and use it in the function. This will clarify the logic and improve
readability a little by reducing line length. Besides, in
vbdev_compress_submit_request(), spdk_io_channel_get_thread() can be
replaced by spdk_get_thread() and do the replacement in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id0fadb5dae9b78ecade99c5deb650849bf6257ab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1453
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Previously only bdev_close() had been ensured to execute on the
correct thread.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie3019bd1206060a86ec3c598795255c4c4357b0f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1696
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI
Not only bdev_close() but also TAILQ_REMOVE and bdev_module_release_bdev()
are better to be executed on the correct thread for
vbdev_compress_destruct_cb().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0810ecc4149747315e6ec290437ba40fb4b71686
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1694
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
vbdev_reduce_init_cb() had ensured only closing bdev was done on
the correct thread. I/O channel should have been released on the
same thread.
Fix this potential issue. reduce_errno and vol cannot be passed
through message because message can have a single parameter.
So set vol before sending message and use vol as reduce_errno.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I923a9e3148db0f5413a6903d62f869eec122dcca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1693
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Factor out setup source and destination mbufs operation from
_comppress_operation() into a helper function _setup_compress_mbufs().
Setup source mbufs and setup destination mbufs are identical except
for total_length, and so this refactorinng is possible.
This refactoring will improve readability and clarify the logic
a little.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia0a230c2d5e74aec917580aae969b49266178191
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1683
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This request was getting leaked previously.
Change-Id: I6e7dc24c92d7bae7a8df54025d61eb391a569df9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1591
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If thread A is the first to grab a channel, the poller will be on thread
A. But then if the shutdown happens such that thread B is the final
channel to release it's channel, it will attempt to free the lun poller
from thread B and crash.
Change-Id: I354f9f28d55e5e82cb6c737c734acadbd80e283d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1590
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Save cache device name in metadata section to
check if names agree during auto creation on examine.
This change prevents accidental creation of ocf devices.
Consider example in which vbdev_split is used as cache:
1) bdev_malloc_create -b Malloc0 ...
2) bdev_malloc_create -b Malloc1 ...
3) bdev_nvme_attach_controller -b nvme ...
4) bdev_split_create nvme 2
5) bdev_ocf_create ocf0 wt nvmen1p0 Malloc0
6) bdev_ocf_create ocf1 wt nvmen1p1 Malloc1
7) *shutdown*
8) *startup*
9) bdev_nvme_attach_controller -b nvme
Now ocf0 bdev gets created with cache = nvmen1 (not nvmen1p0)!
This is because nvmen1 and nvmen1p0 have the same metadata.
The result is rather unexpected,
so we would like to verify that cache device
is the one used during creation.
Name is not an ideal way to verify that,
but it should work for most cases.
This change is related to issue #1320
Change-Id: I19ce97163090c5c5b3324eaed90b3134011bb3fb
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1544
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This change is aimed at fixing github issue #1312 where we are
apparently calling the nvme_bdev_ctrlr_destruct function more than
once.
In the previous implementation, if a controller was resetting for more than
one iteration of the poller, a second iteration of the poller would get
registered.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ica01ecb21d76ea4f60624efd780bf4eea957c277
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1611
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reorder vbdev_redoce_load_cb() so that normal case comes first,
orphaned case comes second, and other error cases come at last.
This will simplify the code and improve readability a little.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ieb79364f0b3996600e8ff7ec340101877527cac2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1477
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Move queue insertion to the end to avoid removal in error cases.
spdk_bdev_module_examine_done() is duplicated with the caller in
error cases and so remove it.
I/O channel is not got in this function and so remove
spdk_put_io_channel() in error cases.
move up spdk_bdev_close() to call at error_bdev_register or
error_claim label.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I34a1459dcb0d3e0a2018f5b50db5be3ac44b6049
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1469
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
In comp_bdev_ch_create_cb(), list head comp_bdev->pending_comp_ios and
comp_bdev->queued_comp_ops should be initialized only when
comp_bdev->ch_count is 0. Besides, extra brackets for if condition
can be removed.
In _comp_bdev_ch_destroy_cb(), comp_bdev->ch_count is not necessary
to check if it is 0 again.
Fix these.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I71786423a77819c41419c51a4cfcad71b85a0b39
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1444
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When reduce volume is unloaded at compress bdev removal, the callback
to unload did not get base bdev's I/O channel on the same thread
that opened base bdev.
Hence spdk_put_io_channel() hit assert later.
This patch fixes the bug by sending message to get I/O channel.
Fixes issue #1307.
Besides, add assert to _delete_vol_unload_cb() to detect the unexpected
complex cases. Fix will be added later.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If4983c2e06d7b0b7618f38fb80f3aa73effe4b83
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1426
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Introduce context structure to ensure the callback function to
bdev_compress_delete() runs on the original thread.
The time to free comp_bdev and the time to call the callback function
to bdev_compress_delete() are different. Hence it is necessary to
allocate context separately.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I534f5673b58d2a0321ee752534c3ea10fb37b11d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1472
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Commit 8c1d107 added a new erase API and renamed the original
API with "secure_" prefix according to the specification, as the
secure one will not cryptographically erase user data, due to
the limitation from the drive, only the secure API can be
supported, so changing the caller to use the original again.
Change-Id: I25cb054e728065d9ae9c6c30aa0ab374d60cf6f6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1519
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Actually we can just use one API to finish the requirement.
Change-Id: Ia0d3d589755e8c92f636d3d090ec642299511401
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1280
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will eliminate one calloc() and add one small code cleanup.
Change-Id: I3d67f2b073a46e04304ae5342974afecf532794b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1233
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The revert asynchronous API doesn't run as the *real* asynchronous
way, because the drive can only support synchronous module and only
1 session is supported. The reason why we added this API is that
RPC call has the default timeout value here, while the revert may
take over several minutes, the API itself doesn't short the revert
action, so just remove it and use the synchronous API instead.
The revert action will erase all the users data and bring the drive
back to the factory state, it should run in the synchronous mode,
so just remove the asynchronous API and we can increase the timeout
value when using RPC to call this API.
Change-Id: I08a082edea6385e378399423bbb229d05f8bc262
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1232
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Sending large amounts of data from host to the controller with 1s
admin polling time, take a lot of time (e.g. 1M firmware file in 4k
chunks takes ~17min).
Reducing this time to 10ms whole operation takes about 3s.
Change-Id: I2dabe9f60acab57e348c34bfabc3cc7479dedec9
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1393
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This will allow us to keep track of compatibility issues on a
per-library basis.
Change-Id: Ib0c796adb1efe1570212a503ed660bef6f142b6e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1067
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Default was 8 which meant max of 8 bdevs. Bump it up to 64.
Fixes issue #1232
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I966e90de5c27910df0e4da0d1062d9d1665f8de6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1063
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The adminq poller could get a failure if the ctrlr has
already been hot removed, which starts a reset.
But while the for_each_channel is running for the reset,
the hotplug poller could run and start the destruct
process. If the ctrlr is deleted before the for_each_channel
completes, we will try to call spdk_nvme_ctrlr_reset() on
a deleted controller.
While here, also add a check to skip the reset if the
controller is already in the process of being removed.
Fixes#1273.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I20286814d904b8d5a9c5209bbb53663683a4e6b0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1253
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This isn't in the performance path, so using the mutex
here makes it a bit more consistent with other ctrlr
members such as 'destruct'.
This prepares for a future patch which will defer
ctrlr destruction on removal if a reset is in progress.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ica019cd90dc3b46ef6a13dd311054dbdc95855aa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1252
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Make sure a namespace is depopulated only once all outstanding commands
generated by the media manegement poller to that namespace are completed.
It fixes the use-after-free errors reported by asan during shutdown.
Fixes#1251
Change-Id: Iab99b594756cee2d41235c70194bcaa5f5e1fb0b
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1199
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Now that a namespace can be depulated asynchronously now, the NVMe bdev
module should also be finalized asynchronously, after all namespaces and
controllers are deallocated.
Change-Id: Ic082fec8e31e9bd5ee1c698cd8dfca9f248776d3
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1198
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch adds the ability for a namespace to be depopulated
asynchronously. Currently both regular NVMe namespaces, as well as the
OCSSD ones are depopulated synchronously, but it'll be changed in the
upcoming patches.
The nvme_bdev_ctrlr.ref is now not only tracking the number of bdevs
created on that controller, but also the number of populated namespaces.
Change-Id: I7b112d9b0d41739f3dc7d427e9da340843128c54
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1197
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Since the OPAL here is just for NVMe device, so we don't need to use dev_handler as common
handler, just rename it to spdk_nvme_ctrlr. And we don't exit the initialization if
OPAL construnction had a failure. Also move the timeout initialization to construct().
Change-Id: I11f0aea961eaa3da0c6253eb03d0227f7e7e5f11
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1101
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Replace the 'expected' and 'completed' raid_bdev_io counters with a
single 'remaining' counter. This can represent either remaining blocks
or IOs required to complete the raid_bdev_io. Add a function which
decrements the counter and completes the raid_bdev_io if it reaches 0.
Change-Id: Ifa8bcc05c33e80159aad21d6e73d1f6185cca1cf
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/856
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Add raid5 module and unit tests. Use './configure' with option
'--with-raid5' to enable it.
Change-Id: I9f07da8c3567fa65499444899c899adaa2e29550
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/855
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
With the JSON configure, the base device will be opened on the
same thread (RPC thread) to handle the JSON operation. Later the
virtual device upon the base device can be opened on another
thread. At the time of virtual device destruction, the base
device is also closed at the thread where opening the virtual
device, it is actually different than the original thread where
this base device is opened through the JSON configure.
Add a thread here to record the exact thread where the base
device is opened and then later route it back to handle the base
device close operation.
Change-Id: Ib95e8d190bd87158ae1ecc6698da95ccc4ba9579
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/992
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
With the JSON configure, the base device will be opened on the
same thread (RPC thread) to handle the JSON operation. Later the
virtual device upon the base device can be opened on another
thread. At the time of virtual device destruction, the base
device is also closed at the thread where opening the virtual
device, it is actually different than the original thread where
this base device is opened through the JSON configure.
Add a thread here to record the exact thread where the base
device is opened and then later route it back to handle the base
device close operation.
Change-Id: Id1299bb0d86db57bce48b9787d7f248d29a6f345
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/974
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
With the JSON configure, the base device will be opened on the
same thread (RPC thread) to handle the JSON operation. Later the
virtual device upon the base device can be opened on another
thread. At the time of virtual device destruction, the base
device is also closed at the thread where opening the virtual
device, it is actually different than the original thread where
this base device is opened through the JSON configure.
Add a thread here to record the exact thread where the base
device is opened and then later route it back to handle the base
device close operation.
Change-Id: I4f48e829a70a83bd71d05dbb13f88819201d9c15
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/969
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
while the size of namespace is changed,
the resize event will be notified.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Signed-off-by: Allen Zhu <allenz@mellanox.com>
Change-Id: I5d85f17df898dc21c0ae1eb9f529dcb624a457ac
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/849
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added population checks before any media event processings is performed,
as a namespace can get depopulated at any time. This will guarantee
that depopulated namespaces are never touched.
Change-Id: I071404158e099b5f3195c1e3e50563b22cdf5c59
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/921
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Define the minimum number of base devices required for a raid level in
struct raid_module and check that when starting the array.
Change-Id: Ic70d107721e0df48ef8d9406132c103eee3cc9d4
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/851
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Bdev ftl could use io channel directly from ftl library
instead creating its own. This patch removes ftl_bdev_io
and ftl_io_channel structures.
Change-Id: I5f13b6d2c46da2ccfbf7cc01547525ef0f912703
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/623
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
There is no need to have separate IO poller for FTL bdev.
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Change-Id: I19d42f3dc1faad6bb0094681bfe90ad29b88aae4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/545
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Vbdev module should use the base channel, not the vbdev channel.
fixes#1195
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I7e426a2fc1735213c986ba55dc17623bc3ce948e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/791
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The copy engine library, modules and public APIs have been renamed.
Use of the word `copy` has been replaced with the word `accel`
short for accelerator in preparation for adding new capabilities
in the future. Additionally, APIs for what was previously called
the `memcpy` engine have been renamed to identify the engine as a
software accelerator.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia607aa718416146fbba1e6792b8de0f66bd8a5de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/576
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Was using the ch provided by submit(), needs to use base ch
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia3bdb5e4cd9f65bd65f84853ed2f5df1b26dd952
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/820
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Was using the ch provided by submit(), needs to use base ch
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I4ac4ec6d4e1810ede622d3625b9c9e74b690ed8c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/819
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Was using the ch provided at submit, needs to use the base ch
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I383eb418a6448b829c25da5eb2f75a9420475ca2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/817
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Was using the ch provided by submit, should be using the base ch
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I2f49dcd62c246f72b11abd24ef4674ff529fefaf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/816
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Was incorrectly using the channel provided by the submit function.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I97ca626906508e00959d24009017be9106a1ce60
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/815
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The PT channel was used as a parameter for spdk_bdev_queue_io_wait()
when it should have been the underlying base bdev's channel.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I6c4cf32016935a20eafd565e5688ffc43b1d9533
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/790
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is no need to support read operations on separate thread.
Change-Id: I10b595b8eeaf5fd0182f05913fdd5baa4b84961f
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471910
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Allow for using appends instead of writes.
Change-Id: I2f0d3bcdbb0eee034f7b0b6349de854ddbf7273d
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481839
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
In order to handle media management events spdk_bdev_open_ext()
should be used instead spdk_bdev_open(). Move this call to ftl lib
to keep media management events internal to the library.
Change-Id: If4c9382cc89fc537667923f00d3dae5df0ace248
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481503
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
When structure for output of json decoders in not initialized
spdk_json_decode_string may fail trying to free uninitialized
string.
This patch changes mallocs used to allocate context and structure
for output of decoder with calloc.
Fixes#1151
Change-Id: I180b2ec52350b4ca90e7c318b4f2d13af554ec49
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/483107
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
bdev_nvme_comparev_and_writev function takes as an argument
only iovs for compare operation and uses them for write
operation. It should also take iovs for write operation.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I5be2610c3d8552559aa4db969d5acb78b1620079
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481806
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There was an issue in the hotplug poller where it would fail to
probe the added/removed nvme pcie devices due to an error trying
to find the PCIe transport type. This happened because the
`struct spdk_nvme_transport_id` needs to have its trstring filled in
after a change was made to get transports by name to allow for custom
transport types. This change fills in the trstring so that downstream
checks correctly pass.
Fixes#1159
Change-Id: I35d2834f3ba58a8e6f8e91d290c1f4cb9c158e5a
Signed-off-by: Mike Carlin <mikefcarlin@protonmail.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482449
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Each namespace should be checked if it is populated when handling chunk
notifications. Otherwise we risk segfaulting if a namespace gets
depopulated before the notification callback is executed.
Change-Id: Ic55104a52087b1ea7090eeaede3e2221682cd331
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482410
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When there is an error returned from low level driver, we should unregister
the poller and free the context, or it may get double free when reaching next
poll round.
Fix issue #1156.
Change-Id: I34ca605f11249b885756d761291aebbb7a382d7e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482215
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use new bdev aux buf feature. Huge performance benefit for writes.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I5a27460a369ef5f13bf490a287603e566071be41
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478384
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Changed write function to be able to work in zone append mode.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I3af98f1d8e69eac6922e19addebabbc6ce847c63
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468042
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Handle finish zone management function to zoned block vbdev
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: Iffe24572609e741a79b6bb92f72b56cede4906ca
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468041
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Handle close zone management function to zoned vbdev
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I001e25a157ba738724012ca366ef901016733944
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468040
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Added handling of reads to a zone; blocks outside of a write pointer
are zeroed out.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: Iaf60d6ff74caf9831998862e048446ccd0a0fa3f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468038
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Added handling of write commands, including zone state changes and write
pointer updates.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I576ca18b52474bb299c20296a7561f25e5afa85b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468037
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Add handling of two of the zone management commands for vbdev.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I2868a96d15acbc2d13d18dea405b6d98cb4573d6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468039
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
For the latest QAT devices there are 3 CPMs each with 16 VFs and
2 qp each VF. To load balance for multi-thread operations we want
to assign each new queue pair (QP) on a per CPM (processing module)
basis so this patch assigns the next QP, for QAT, by taking the
last + 32 modulo the total number of QP. This will results in each new
channel getting a QP on the next CPM.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Iea608ada68517b6f2faecd45701c7aae6d23a2d0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477082
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Mainly to make it way easier to write the UT in the next patch
in the series.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I00b00d8a83edfad51f3945c49764ae6442fb6f52
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477332
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously one global list of device/qp combinations was used
regardless of PMD and when assigned, the device name was checked
to make sure a matching one was pulled from the list.
Later in this series a patch will make use of having different
lists as we discovered a decent way to load balance QAT but the
implementation with all PMDs on one list was too complex.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I54dfbd0206a881d126831ba27a4ae05cdc6f7c11
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477152
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
"lbk" name is more OCSSD specific so in
generic FTL "block" name is more suitable.
Change-Id: I792780297b792bf5e02f13cc20346da56b032918
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472284
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added handling of get zone info command
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I2d80885af83345c945af22a46a41abf55e1eb413
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468036
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Added zone specific information during initialization (starting LBA,
capacity etc.)
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: If0599960f0f872117691c801dce497649da20da6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468034
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The trtype should be stored as both an enum and string. This is intended to
help pave the way for pluggable NVMe-oF transports.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I6af658d7a17c405e191ff401b80ab704c65497e7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478744
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
