To achieve the highest possible IO-rates and lowest latency, then CPU
cycles must be spent processing IO. This commit introduces three
different techniques dependendent on the 'io_mechanism' used.
For 'libaio', xNVMe is instructued via 'opts.poll_io' to not wait for
completions, thus xnvme_queue_poke() returns immmediatly, the user can
then call xnvme_queue_poke() as frequently as desired. This requires
xNVMe v0.5.0. Earlier versions will ignore 'opts.poll_io' for 'libaio'.
For 'io_uring', xNVMe is instructed via 'opts.poll_io' to enable
IORING_SETUP_IOPOLL.
For 'io_uring_cmd', xNVMe is instructued via 'opts.poll_sq' to enable
IORING_SETUP_SQPOLL, this sets up a kernel-side thread reaping
completions from user-space on the ring. Note that 'io_uring_cmd'
requires liburing >= 2.2.
This commit enables the above by default. The above can be disabled by
setting 'conserve_cpu' to true on the bdev-setup.
Signed-off-by: Simon A. F. Lund <simon.lund@samsung.com>
Change-Id: Id54f1e59733ce9ae3b174ad4562904d868d4ef4f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14678
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In DPDK 22.11 rte_cryptodev_sym_session_create() now takes
a single mempool with element size big enough to hold session
data and session private data.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6c9db063825843a903d1ff84dd8d77f198a841a1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15435
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
Adjusts use of rte_crypto API after DPDK patch below:
(bdce2564dbf78e1fecc0db438b562ae19f0c057c)
For DPDK 22.11 and later, rte_cryptodev_sym_session_init()
is no longer used and only calling
rte_cryptodev_sym_session_create/free().
Change-Id: I89d8fa737fd6c199a4a5a810b85d6d5b79d5d27b
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15391
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
The internal mempools were replaced with the newly added iobuf
interface.
To make sure we respect spdk_bdev_opts's (small|large)_buf_pool_size, we
call spdk_iobuf_set_opts() from spdk_bdev_set_opts(). These two options
are now deprecated and users should switch to spdk_iobuf_set_opts().
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib1424dc5446796230d103104e272100fac649b42
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15328
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
This gives us a place to initialize iobuf pools, specify subsystem
dependencies, and execute RPCs to configure the sizes of the pools.
We allow users to configure the size of the pools either through the
options in spdk_bdev_opts or through the new RPC, iobuf_set_options.
The second option has higher priority, so it will override the options
set by the bdev layer.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I7c45ace04bc71c8343658f98248fc7babcf24e5d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15765
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
OpenSSL's docs state that SSL_shutdown() should be called prior to
closing an fd to notify the peer that we want to terminate the
connection. Otherwise, the peer might see the connection as being
terminated abruptly and might report unexpected EOF errors. We've even
seen those errors in our test scripts:
*ERROR*: spdk_sock_recv() failed, errno 107: Transport endpoint is not connected
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I111a0cc3ced13dbf3e6d18d004bbec6cac96576c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15824
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Found with misspell-fixer.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: If062df0189d92e4fb2da3f055fb981909780dc04
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15207
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is in prep for adding a new compressDev accel_fw
module that will contain all of the DPDK compressDev specifics
on it, the vbdev will make calls to the accel_fw instead.
As the accel_fw has SW based compression, we want the configure
option to apply to building the vbdev module but not the accel_sw
software implementation or the upcoming compressdev module.
Renamed to "compress" as reduce is a term specific to the vbdev
implementation of the compression to be provided by the accel_fw
and thus the same reason why we leave the test flag called REDUCE
because it's controlling tests for the reduce library as well as
the vbdev module that is using reduce. The flag does not apply
to the SW implementation of compression.
This does not affect upcoming accel_fw compressdev module, that
will have its own configure option.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: If8ed3e48e1e3dabcaad1cd161289e78122cd9d58
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15179
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
While lvs->destruct is set in a few places, it is never read. Since it
is not used, it is removed.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Iee21e92c9049d143fca13930b4b5f328f9ec38f0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15716
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Copy-on-write happens when cluster is written for the first time for
thin provisioned volume. Currently it is implemented as two separate
requests to underlying bdev: read of the whole cluster to bounce
buffer and then write of this buffer to the new location on the same
underlying bdev.
This patch improves copy-on-write flow by utilizing copy command of
underlying bdev if it is supported. In this case we have just one
request to bdev and don't need the bounce buffer.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I92552e0f18f7a41820d589e7bb1e86160c69183f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14351
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
New `translate_lba` operation allows to translate blob lba to lba on
the underlying bdev. It recurses down the whole chain of bs_dev's. The
operation may fail to do the translation when blob lba is not backed
by the real bdev. For example, when we eventually hit zeroes device in
the chain.
This operation is used in the next commit to get source LBA for copy
operation.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I89c2d03d1982d66b9137a3a3653a98c361984fab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14528
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
If calloc failed, there was a NULL pointer deref.
Signed-off-by: plestk <plestringant@kalray.eu>
Change-Id: I8e4104589a283349e7251c32b1decdfdd850b9ec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15779
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There is a defect related with the paramater passing.
We should use a variable to store the value first.
We should not directly pass task->zcopy to this function and
reset this variable after the function, because we want to avoid the
recursive calling issue.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I674eb8c6d56704d6508e5753edb6d9233f6f434a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15378
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
With DPDK 19.02 the private session mempool was introduced.
See patch below in SPDK:
(5c1c946) bdev/crypto: compile with DPDK 19.02
As of latest SPDK, the privae session mempool was always
passed to rte_cryptodev_sym_session_init(). Since #ifdefs
for older DPDK versions were removed.
This patch makes it obvious which mempool is used.
Change-Id: I6572c925d8532a6cf81c516e3e274eef45236fb1
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15434
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Starting with DPDK 22.11 the struct rte_cryptodev_sym_session
is no longer part of public API. Instead the void * is used.
There is no need for SPDK to track the type of session variable,
so replace that with void * regardless of DPDK version.
Change-Id: I29f82e87a593dd1886673fe2a56145da2dbe8354
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15433
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch separates out the session creation and freeing
to two static functions. Later in the series it will
limit the required changes.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I9fb1070d0f5a062991ba82580886ff41c2eeaa4a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15432
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is first in series that updates bdev crypto
to support DPDK 22.11. See changelog entry from DPDK:
* cryptodev: The structure ``rte_cryptodev_sym_session`` was made internal.
The API ``rte_cryptodev_sym_session_init`` and
``rte_cryptodev_sym_session_clear``
were removed and user would only need to call
``rte_cryptodev_sym_session_create``
and ``rte_cryptodev_sym_session_free`` to create/destroy sessions.
The API ``rte_cryptodev_sym_session_create`` was updated to take a single
mempool
with element size big enough to hold session data and session private
data.
So this patch abstracts out lookup for vbdev_dev as it will be used from
multiple places later in the series.
Change-Id: Ibd9ca3456b297c84f8cec162fae27f4ef064cd42
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15431
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously, it was possible to execute spdk_bdev_io_get_buf() on a
different thread than the one that the IO was submitted on, which is
unsafe. Now, the buffers are always allocated on the correct thread and
we do spdk_thread_send_msg() only for the rbd library functions.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I07be5a4d0bd1463e0b7cf1aaee146edc575df387
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15671
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously, it was possible to execute spdk_bdev_io_get_buf() on a
different thread than the one that the IO was submitted on, which is
unsafe. Now, the buffers are always allocated on the correct thread and
we do spdk_thread_send_msg() only for the reduce library functions.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I50bf9aa3054073636204ec3a147d464f194a8c8f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15667
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
bdev_daos_writev() had a typo where local variable `io` wasn't advancing
in a loop over iovs. To avoid such issues in the future, function argument `iov`
is used instead, there's no need for original value and it seems less error prone.
bdev_daos_readv() was updated as well to be consistent with bdev_daos_write()
Signed-off-by: Denis Barakhtanov <denis.barahtanov@croit.io>
Change-Id: I06d39f207c7b881aca950c5721f250c17d41c328
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15581
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Related reference:
OPENSSL_hexstr2buf() does the same thing as OPENSSL_hexstr2buf_ex(),
but allocates the space for the result, and returns the result.
It uses a default separator of ':'. The memory is allocated by calling
OPENSSL_malloc() and should be released by calling OPENSSL_free().
Change-Id: I0d2b9b66a41e53f8b438470e59a478c17df2e1e6
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15647
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: wanghailiang <hailiangx.e.wang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
Use the string value instead of int in raid_bdev json info.
Rename raid_bdev_parse_raid_level() to match raid_bdev_str_to_state().
Change-Id: I135269fe6de0746e661828cb1d36514b082011bd
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15308
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Added io_outstanding in struct nvme_io_path to record outstanding
I/O number in each path, which will be used by multipath to select
I/O path.
io_outstanding gets updated for I/O sent to a namespace and not get
updated if sent to a controller.
For FLUSH case, it calls bdev_nvme_io_complete() directly and
io_outstanding is not updated for this case.
spdk_bdev_io_get_buf() is executed in the generic bdev layer.
Hence, we do not update io_outstanding for spdk_bdev_io_get_buf().
Change-Id: I47b515e0f254e5daa7e1e88799a832032b23ff34
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15032
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Directly call bdev_nvme_io_complete() for FLUSH case.
This is a preparation for io_outstanding update in nvme_io_path. For
IO sent to a namespace, io_outstanding gets increment/decrement. For
IO sent to a controller, io_outstanding is not updated. For FLUSH
case, it's not sent to a namespace nor a controller. Directly call
bdev_nvme_io_complete() here to make it easier to understand why
io_outstanding not gets updated for FLUSH.
Change-Id: Idcf4b37a0816a327256fe87004705fb65df1b06c
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15517
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
`BDEV_IO_NUM_CHILD_IOV` and `BDEV_RESET_IO_DRAIN_RECOMMENDED_VALUE`
are public macro definitions without `SPDK_` prefix, so we add the
`SPDK_` prefix to them.
Change-Id: I4be86459f0b6ba3a4636a2c8130b2f12757ea2da
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15425
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Currently this translation was only done for IOs that were successfully
submitted. This needs to be done on submission too, in order to pass the
proper error code to the bdev layer.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I69bf7b33b4d3a89199e1105c7f49ceeb7ab07da4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15486
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We should always build all function that are part of the API, even if
some of the libraries they depend on are missing. In that case, they
can return an error instead.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I72b450b3a1d62e222bd843e45be547d926414775
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15414
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add an option "--generate-uuids" to bdev_nvme_set_options
RPC to enable generation of UUIDs for NVMes devices that
do not provide this value themselves. The identifier is
based on a serial number of the device, so a bdev
using this NVMe will always be assigned the same UUID.
Part of enhancement from #2516.
Change-Id: I86d76274e5702d14ace89d83d1e9129573f543e2
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15151
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Use common structures, decoders and free functions in
RPC methods that use only bdev name as a parameter.
Signed-off-by: Rafal Stefanowski <rafal.stefanowski@intel.com>
Change-Id: I49668d744dcb7ba901df42cb5279c9e425f71041
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15457
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Checking the raid_bdev state is sufficient.
Change-Id: I86c7f4b547236a58031e8f480c7621e40f63ce12
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15472
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
It is much more straightforward to just use raid_bdev instead.
Change-Id: I887e527be3de67a688e10ff68bbc87ccd5ac3261
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14290
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Those lists match exactly the values of raid_bdev->state.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I0e7fb84ef77036608afd3a71318032f536bff4e8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14187
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
per Intel policy to include file commit date using git cmd
below. The policy does not apply to non-Intel (C) notices.
git log --follow -C90% --format=%ad --date default <file> | tail -1
and then pull just the 4 digit year from the result.
Intel copyrights were not added to files where Intel either had
no contribution ot the contribution lacked substance (ie license
header updates, formatting changes, etc). Contribution date used
"--follow -C95%" to get the most accurate date.
Note that several files in this patch didn't end the license/(c)
block with a blank comment line so these were added as the vast
majority of files do have this last blank line. Simply there for
consistency.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Id5b7ce4f658fe87132f14139ead58d6e285c04d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15192
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Support injecting data corruption for processing read/write I/O.
Add two parameters, corrupt_offset and corrupt_value, and an error
type corrupt_data.
For write I/O, inject data corruption before submitting write I/O
to the underlying bdev. For read I/O, inject data corruption after
read I/O successfully returned.
Cause the data corruption by xoring the value at the corrupt_offset
with the corrupt_value. corrupt_value is required to be non-zero to
cause data corruption necessarily.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I67d8d252b06d7a221413e74996f7f894e6519556
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15028
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
This is a preparation to inject data corruption at completion for
read I/O.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I839f454d643254f2b805f3d4c65282deee037d71
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15003
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The bdev*_with_md APIs now allow to pass NULL md
pointer, so calling this function without checking
for metadata simplifies code
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: Ie4137f7a6a7628a13d14c7c9a5e9aa1ceb99d322
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15091
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Fixes commit c3a5848 where support of memory
domains was added without usage of the ext API
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: I7b318f515d7421b8876d4717c0ef293084401bbc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15089
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Fixes commit c3a5848 where support of memory
domains was added without usage of the ext API
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: Ia0d7132f11c233e334965669ab0d237c24074745
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15088
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
