We need to check that the given SQ is active (i.e. is currently mapped
into the process), so make the check the same as that in
poll_group_poll().
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ibd3babd7520f611f596f3bab15765fa13b4d6b99
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12663
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is better represented under the name vfio_user_ctrlr_intr().
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ic3fa0fe238fd8ce4930bfd3e34b9dbc1b935aa6e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12662
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There's a non-zero cost to looking up the CQ; only call this function in
the poll path if we need to.
While here, we'll streamline the ctrlr-level check.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I6bf123f759fcd856196f6613cb6c7d0219550136
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12660
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Rui Chang <rui.chang@arm.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Only 4 bytes or 8 bytes are valid numbers when to access NVMe
registers, add the check here.
Fix issue #2495.
Change-Id: I63b6e16a156f6eba17f397ec9d1a447e6a80b4da
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12643
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The CSTS.SHN is changed only in shutting down the controller,
nvmf library already ensure that all the outstanding IOs will
be flushed before that, so we can remove this check here.
Change-Id: Ib93a256e986b7b2ec1da0fc7992feb3a02c1d657
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11674
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
After finishing migration in source VM, the subsystem is in
PAUSED state, the controller is dead for the source VM, we will
destroy the controller when disconnecting socket, but after that,
we should RESUME the subsystem so that it can be ready for the
next new client.
Fix issue #2363.
Change-Id: Icf0999b9085cebe8be4c8783e1a43bb13d4f7987
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11422
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The completion callback of `spdk_nvmf_subsystem_resume`
and `spdk_nvmf_subsystem_pause` can run in different
core other than the `vfu_ctx` core, this may lead to
race condition when changing controller's state. Here
we use a thread message to change it in the same thread
context.
Change-Id: I53d139adcca6ff72a3b91a2a931f1239f3271fa9
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12558
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Clarify via a variable name that we're dealing with the admin CQ
specifically.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I032f6b27e2d75bffb9d95481f177ce0c3655550c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12556
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Constantly polling the socket degrades performance significantly.
Polling the socket at a much lower frequency, every 1ms, is good enough
for now.
fixes#2494
Signed-off-by: Thanos Makatos <thanos.makatos@nutanix.com>
Co-authored-by: John Levon <john.levon@nutanix.com>
Change-Id: I4a7d35c45ece863b9df756324c23f41736df49f8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12494
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The spdk_rmb() in nvmf_vfio_user_poll_group_poll() is unnecessary: we
already have a read barrier for SQ tail updates at the per-SQ level, so
this doesn't add anything.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I88cddd968f4a949640754526e19cb869d9fb31af
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12381
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There's no need to spdk_rmb() in nvmf_vfio_user_sq_poll() unless we
actually found the tail has advanced.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I778835c527409764c3db78459b2aa76420cc0105
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12378
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
We need to keep track of the shadow doorbell buffer locations, and make
sure to re-initialize on resume.
Co-authored-by: Thanos Makatos <thanos.makatos@nutanix.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: If3ba456fb35f6f6199e4ff14cec1aad96775f71a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12237
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
There were a couple of places not using the standard formatting for qid
still.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: If96c3f6d762128b0f274e2c4e9eebf4e80e35139
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12346
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
As per the NVMe specification, a host can identify two areas of guest
memory: one of which is used for the host-written doorbells, and one of
which contains event indexes. The host writes to the shadow doorbell
area, but also writes to the controller's BAR0 doorbell area if the
corresponding event index is crossed by the update. This avoids many
mmio exits in interrupt mode, where BAR0 doorbells are not directly
mapped into the guest VM, with greatly improved performance.
This isn't a useful feature in BAR0 doorbells are mapped into the VM, so
we explicitly disable support in that case.
NB: the Windows NVMe driver doesn't yet support this feature.
Although the specification says that the admin queues should also engage
in this behaviour, in practice, no VM does, so have to include some
hacks to account for this.
Co-authored-by: John Levon <john.levon@nutanix.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I0646b234d31fbbf9a6b85572042c6cdaf8366659
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11492
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This lets us use it more widely.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I9c67be19020677fab3eafe05c1e0f91c3d04611d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12307
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Only FDs are used for passing them to another process,
we can unlink them after creation.
Here we only unlink the files created in vfio-user,
and there is still one file created via libvfio-user,
it will be fixed via
https://github.com/nutanix/libvfio-user/issues/660.
Partly fix issue #2449.
Change-Id: Ie27640e0cb85f44596e9d0ad5a2b67adf0419f5c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12195
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
No functional change; this just makes the poll code a little easier to
read.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: If6d1dcd940ed5b461856b535b1bf01c4efa8612a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12076
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The rdma buffer for stripping DIF metadata is added. CPU strips the DIF
metadata and copies it to the rdma buffer, improving the rdma write
bandwith. The network bandwidth during 4KB random read test is increased
from 79 Gbps to 99 Gbps, the IOPS is increased from 2075K to 2637K.
Fixes issue #2418
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Change-Id: If1c31256f0390f31d396812fa33cd650bf52b336
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11861
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
To help grep, use a standard sqid:%d style format for identifying queue
IDs.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ib82c81939f85f9beb333a4db10d006524522a1d9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11822
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
As a general utility function, move it up with the others.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I32881c01afd9819c889730d7c09163c95fbb827e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11790
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For each queue, track its doorbell location individually, rather than
needlessly recalculating it every time we look up the doorbell value.
This will also greatly simplify shadow doorbell support.
Co-authored-by: Andreas Economides <andreas.economides@nutanix.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I6882d2f92ee2f2b2b90c54ee14e5f6b41ecca85d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11789
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In vfio-user transport, whenever one IO is completed, it will trigger
an interrupt to guest machine. This cost quite some overhead. This patch
adds an adaptive irq feature to reduce interrupt overhead and boost
performance.
Signed-off-by: Rui Chang <rui.chang@arm.com>
Change-Id: I585be072231a934fa2e4fdf2439405de95151381
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11840
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Rename ->doorbells to ->bar0_doorbells. This will help avoid confusion
later with shadow doorbells.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Id432938cfeb3033e79dc6e1b491dad964227687a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11788
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
NVMe over PCIe Transport Spec 3.1.2:
The host should not read the doorbell registers.
Explicitly refuse these reads.
Co-authored-by: John Levon <john.levon@nutanix.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ie64fd5ce7988ee86c612b3ef6046a57af467e266
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11787
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Refactor controller reset a little bit for cleaner code.
Co-authored-by: John Levon <john.levon@nutanix.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I2b3323005d4e788ffe980d41c349702828886981
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11786
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
If we're in interrupt mode and live migrating a guest, there is a window
where the I/O queues haven't been set up but the device is in running
state, during which the guest might write to a doorbell. This doorbell
write will go unnoticed. This patch ensures that we re-check the
doorbells after an I/O queue has been set up.
Fixes#2410
Signed-off-by: Thanos Makatos <thanos.makatos@nutanix.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I161d2a0e7ab3065022b2bccbe17f019640cceeba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11809
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Make sure cq->group is set even in interrupt mode.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I9f722917a8e3aebbd5d66648a3909f795897ec1a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11997
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We were accidentally reading the spdk_nvme_status from the CPL; on one
test, this was contributing to 2% of cache misses.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I7c967690458a183799f8d835360800d3094c3131
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11849
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When vfu_run_ctx() returns EBUSY, due to an ongoing quiesce, we did no
work, so should return SPDK_POLLER_IDLE.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I5953ab652f0adf22df81c94c4bece507833cece4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11810
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We will use nvmf library CSTS.CFS instead so that the client can
get this error status.
Change-Id: I42c248a7333d1f9c940bb29135c887a61c906bd4
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11676
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
No logic code changes, we will define a nvmf controller migration
data structure in public header file, this is a preparation patch.
Change-Id: I0a98581b320ac9b12b7e4bf838222c5075168e64
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11493
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To fully support interrupt mode for the vfio-user transport, we need to
arrange to wake up in one of two conditions:
- we receive a vfio-user message on the socket
- a client writes to one of our BARs
In response, we can process any pending vfio-user messages, as well as
poll the actual queue pairs.
As there is no way for a client-mapped BAR write to cause us to wake up,
interrupt mode can only work when mappable BAR0 is disabled. In that
case, each BAR write becomes a vfio-user message, and can thus be
handled by registering the libvfio-user socket fd with SPDK.
For the poll group poller, we enable interrupt mode for it during the
vfio-user ->poll_group_create() callback; this only works in the case
that no other transports without interrupt mode support are sharing that
poll group.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ic784d01078b2006edb27892fc0613f934eca930b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10722
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
One simple fix for nvmf_vfio_user_qpair_abort_request().
Current implementation mixed up request of abort cmd and the request
to abort, which cause problems.
Signed-off-by: Rui Chang <rui.chang@arm.com>
Change-Id: Ia0db9aa738e372789fc502ef877fd1c841c0a2e3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11711
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
A common pattern is:
if (foo->thread == spdk_get_thread())
cb(arg);
else
spdk_thread_send_msg(foo->thread, cb, arg);
for cases where it's important the callback runs on a particular thread,
but it doesn't matter if it's synchronous or asynchronous.
Add a new API to support this pattern, and convert over the current
instances.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Idfbf77c02c9321c52e07181ffd8b0c437e1ab335
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11503
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
We can ask libvfio-user for the listening socket fd, and register that
for SPDK interrupt handling.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I8d0ba7a86403f2d0170b9359480f1fefc1036557
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10721
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
The accept poller only needs to run when vfu_attach_ctx() makes sense:
in other words, when we don't have a controller created.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Icef4e6184c9ae6d7951d015530a05132c4ba6994
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10720
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Now vfio-user owns its the accept poller itself, there's no reason to
loop across all endpoints: instead, the lifetime of the accept poller is
better matched by creating it in the ->listen() transport callback.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ia92e29b1cee263f1461f640cfdd27cdb674848fb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10719
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
For the benefit of forthcoming vfio-user changes, register the poll
group poller prior to calling the transport create callback, and pass in
a pointer to the poll group itself.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Idbc24126c9d46f8162e4ded07c5a0ecf074fc7dd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10718
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The above values were added with shared CQ feature, and they
are left when restore the CQs in destination VM.
Change-Id: Ib1f28dad833da31e571eb2e2f0b5c81f0bf05a3b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11419
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The CSTS register in source VM was left to migrate.
Fix#2362.
Change-Id: Ieef028578d2897b27a6ff594b16801462eb1b75e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11418
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The controller data structure may be freed before subsystem resume done
callback, we can take endpoint as the input parameter to avoid this issue.
AddressSanitizer: heap-use-after-free on address 0x625000046100 at pc 0x00000082818f bp 0x7fff7b09bd10 sp 0x7fff7b09bd00
READ of size 8 at 0x625000046100 thread T0 (reactor_0)
#0 0x82818e in vfio_user_dev_quiesce_resume_done /spdk/lib/nvmf/vfio_user.c:2147
#1 0x782cc0 in subsystem_state_change_done /spdk/lib/nvmf/subsystem.c:634
#2 0xad047b in _call_completion /spdk/lib/thread/thread.c:2344
#3 0xabc48d in msg_queue_run_batch /spdk/lib/thread/thread.c:710
#4 0xac0670 in thread_poll /spdk/lib/thread/thread.c:926
#5 0xac0ead in spdk_thread_poll /spdk/lib/thread/thread.c:986
#6 0x9a5b4f in _reactor_run /spdk/lib/event/reactor.c:920
#7 0x9a6442 in reactor_run /spdk/lib/event/reactor.c:958
#8 0x9a717c in spdk_reactors_start /spdk/lib/event/reactor.c:1060
#9 0x99884a in spdk_app_start /spdk/lib/event/app.c:643
#10 0x407e82 in main /spdk/app/nvmf_tgt/nvmf_main.c:75
#11 0x7f822095ff42 in __libc_start_main (/lib64/libc.so.6+0x23f42)
#12 0x407abd in _start (/spdk/build/bin/nvmf_tgt+0x407abd)
0x625000046100 is located 0 bytes inside of 8320-byte region [0x625000046100,0x625000048180)
freed by thread T0 (reactor_0) here:
#0 0x7f82219ff91f in __interceptor_free (/lib64/libasan.so.5+0x10d91f)
#1 0x837059 in _free_ctrlr /spdk/lib/nvmf/vfio_user.c:2976
#2 0x837327 in free_ctrlr /spdk/lib/nvmf/vfio_user.c:2996
#3 0x843541 in nvmf_vfio_user_close_qpair /spdk/lib/nvmf/vfio_user.c:3742
#4 0x7d1d91 in nvmf_transport_qpair_fini /spdk/lib/nvmf/transport.c:604
#5 0x7ad922 in _nvmf_qpair_destroy /spdk/lib/nvmf/nvmf.c:1055
#6 0x761362 in nvmf_qpair_request_cleanup /spdk/lib/nvmf/ctrlr.c:4026
#7 0x761906 in spdk_nvmf_request_free /spdk/lib/nvmf/ctrlr.c:4041
#8 0x75a931 in nvmf_qpair_free_aer /spdk/lib/nvmf/ctrlr.c:3576
#9 0x7ae626 in spdk_nvmf_qpair_disconnect /spdk/lib/nvmf/nvmf.c:1127
#10 0x83db36 in _vfio_user_qpair_disconnect /spdk/lib/nvmf/vfio_user.c:3433
#11 0xabc48d in msg_queue_run_batch /spdk/lib/thread/thread.c:710
#12 0xac0670 in thread_poll /spdk/lib/thread/thread.c:926
#13 0xac0ead in spdk_thread_poll /spdk/lib/thread/thread.c:986
#14 0x9a5b4f in _reactor_run /spdk/lib/event/reactor.c:920
#15 0x9a6442 in reactor_run /spdk/lib/event/reactor.c:958
#16 0x9a717c in spdk_reactors_start /spdk/lib/event/reactor.c:1060
#17 0x99884a in spdk_app_start /spdk/lib/event/app.c:643
#18 0x407e82 in main /spdk/app/nvmf_tgt/nvmf_main.c:75
#19 0x7f822095ff42 in __libc_start_main (/lib64/libc.so.6+0x23f42)
previously allocated by thread T0 (reactor_0) here:
#0 0x7f82219fff16 in __interceptor_calloc (/lib64/libasan.so.5+0x10df16)
#1 0x837413 in nvmf_vfio_user_create_ctrlr /spdk/lib/nvmf/vfio_user.c:3010
#2 0x83bc68 in nvmf_vfio_user_accept /spdk/lib/nvmf/vfio_user.c:3313
#3 0xabfbd8 in thread_execute_timed_poller /spdk/lib/thread/thread.c:872
#4 0xac0c75 in thread_poll /spdk/lib/thread/thread.c:960
#5 0xac0ead in spdk_thread_poll /spdk/lib/thread/thread.c:986
#6 0x9a5b4f in _reactor_run /spdk/lib/event/reactor.c:920
#7 0x9a6442 in reactor_run /spdk/lib/event/reactor.c:958
#8 0x9a717c in spdk_reactors_start /spdk/lib/event/reactor.c:1060
#9 0x99884a in spdk_app_start /spdk/lib/event/app.c:643
#10 0x407e82 in main /spdk/app/nvmf_tgt/nvmf_main.c:75
#11 0x7f822095ff42 in __libc_start_main (/lib64/libc.so.6+0x23f42)
SUMMARY: AddressSanitizer: heap-use-after-free /spdk/lib/nvmf/vfio_user.c:2147 in vfio_user_dev_quiesce_resume_done
Change-Id: Icf5e5b360b9107a3c5eb960ae59b7fe10ace1c66
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11420
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
nvmf_vfio_user_sq->size and ->qsize both hold the number of entries in
the queue; merge them.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I6c7c2984cbdf90079eec9222e1acbedb92207308
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11297
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since we already allocate ->sg on a per-request basis now, drop the
->reqs_internal allocation in favour of allocating individual requests
and placing them on the ->free_reqs queue, which simplifies the need to
track the array. For request abort, we'll use the ->outstanding request
list, now we have it, to find the victim request.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I25227ccd2ab7e00c8a2e7b2e2af2dc3b073584cd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11427
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Use of %p in logging simplifies this code a little bit.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I8e5daa59a614b8bcde7d67d1e5cc6196923031a8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11244
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Avoid using the modulus operator in the hot-path cq_is_full(),
by aping how cq_tail_advance() is written.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Idbdf1715ab30d08233b38aa7691f0212ae93a542
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11445
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Avoid using the modulus operator in the hot-path sq_head_advance(),
by aping how cq_tail_advance() is written.
Suggested-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Id1e9d63a08e470344fdeb549d78ea505088b1a62
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11436
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
There is very little now shared between submission and completion
queues, so drop usage of this struct, folding its remaining members
into the relevant owning types.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I02195d1944ca9905ef03ddf2c099ddb806df70dc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11296
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Consistently wrap access to queue heads/tails, so it's easier to make
further changes. Adjust sqhd_advance() to match the head/tail naming of
the accessor functions, and move the definitions to be close to each
other.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I197e230ecc4e67fe0207f29281d7e4ca946c22e1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11295
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
