When last clone of a snapshot is being deleted
we remove that snapshot from snapshots list.
We should not do that as it still works as a
snapshot and it is read-only, but it does not list
as a snpashot from get_bdevs. Instead remove snapshot
entry from the list when blob that represents that
snapshot is being removed.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I8d76229567fb0d9f15d29bad3fd94b9813249604
Reviewed-on: https://review.gerrithub.io/436971 (master)
Reviewed-on: https://review.gerrithub.io/437194
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Same as 29be88f (test/blob: always use SPDK_BS_PAGE_SIZE instead of
PAGE_SIZE), ARM system could not find defination of PAGE_SIZE when
building nvme_ns_ocssd_cmd_ut.c., we use OCSSD_SECTOR_SIZE instead of
Page_SIZE here, also use OCSSD_SECTOR_SIZE instead of "0x1000" for const
uint32_t sector_size.
Change-Id: Ib3062232e44b0be26ade7c64340918f2f23ada03
Signed-off-by: Liang Yan <lyan@suse.com>
Reviewed-on: https://review.gerrithub.io/430802 (master)
Reviewed-on: https://review.gerrithub.io/437054
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Since a PDU can be sentout in many times, so this
function is called multiple times, so move the
caculation function in spdk_iscsi_conn_write_pdu
Change-Id: Ib4da4a74c17709d98e4b01c2e76428021afea947
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/429931 (master)
Reviewed-on: https://review.gerrithub.io/435681
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previously there was no consideration for IO that were outstanding
to the crypto device when handling a reset. This patch makes sure
that those IO are completed with FAIL status prior to completing
the reset that we pass down the stack.
It does so by sending down the reset first and in the completion
using spdk_for_each_channel and the poller to quiesce each channel
allowing the crypto side to complete all IOs before we finally
complete the reset IO after the last channel is quiesced.
Resets are tracked on a per bdev basis.
Addresses github issue #449.
Change-Id: Iadb07bada1fcaad33d9f224a60d983a7eb835236
Signed-off-by: paul luse <paul.e.luse@intel.com>
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/428552
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
By running random, 64KB, 70% write, and 30% read workload and periodical
TCP disconnection from the initiator, segmentation fault have occurred.
By investigation, when the last write task completed and dequeued
the primary write task in spdk_iscsi_task_cpl(), the primary write task
was already dequeued in spdk_clear_all_transfer_task().
This patch dequeues all primary write tasks after all outstanding
tasks complete.
After starting to exit the connection, the connection will not receive
any command. Hence waiting for completion of all pending tasks first will
avoid double dequeue safely.
Change-Id: I8e2b6b756be3a6e096675acc81cdb93fb6a7e350
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/430397
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We need additional mocks for structures that were added
in the most recent DPDK release to make our unit tests
build properly.
Change-Id: If6e471528d4cb1dce24fb5d910e9e545fcdaa0f6
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/429987
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If JSON structure is not known it is hard to use it with current API. To
address this gap lets add API that will give more flexibility the user.
This patch also adds proper unit tests.
Change-Id: I82eb8c8d4a562ee4c9eb5b72c69fe36004dc576e
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/424009
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In the case that the subsystem in the related poll group has
NULL IO channel assigned due to some problem like out of resource,
for example, the NVMe SSD hardware itself has limited number
of IO qpairs. The subsystems in the particular poll group
could have zero valid channels. In this case, the creation of
assoicated poll group will fail and when adding the new qpair
to the specified poll group, needs to have a check and pick the
available poll group.
Change-Id: Iedee2a6375e48eb7bf899cfb0542c565c7ebd231
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/423646
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I189ad8889c74937bf43bcf2c3029416ddb94976d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/425705
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I875cc9d6a6bd1e9e9ac25ca9103a2070226ac236
Reviewed-on: https://review.gerrithub.io/428877
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This function doesn't return error code
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I67a8fa7393990470e509baa8934e78bc6f6a6c9e
Reviewed-on: https://review.gerrithub.io/429441
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I90f68e9dbe00854f569f6574b9c89508f89caa43
Reviewed-on: https://review.gerrithub.io/428876
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Purpose: We need to get the port info in other applications
(e.g., NVMe-oF TCP/IP transport)
Change-Id: I3a4636e764e44425436bb064cb0062c6f3e44035
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/428313
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Large read I/O will be typical in some use cases such as
web stream services. On the other hand, large write I/O
may not be typical but will be sufficiently probable.
Currently when large I/O is submitted to the RAID bdev,
the I/O will be divided by the strip size of it and then
divided I/Os are submitted sequentially.
This patch tries to improve the performance of the RAID bdev
in large I/Os. Besides, when the RAID bdev supports higher
levels of RAID (such as RAID5), it should issue multiple
I/Os to multiple base bdevs by batch fasion in the parity
update. Having experience in batched I/O will be helpful
in the future case too.
In this patch, submit split I/Os by batch until all child IOVs
are consumed or all data are submitted. If all child IOVs are
consumed before all data are submitted, wait until all batched
split I/Os complete and then submit again.
In this patch, test code is added too.
Change-Id: If6cd81cc0c306e3875a93c39dbe4288723b78937
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/424770
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Coverage report indicated these were not currently
covered.
Change-Id: Ic67f1d6321c39c59ede8a379051e238d3b0fecb6
Signed-off-by: Mike Altman <maltman@scalecomputing.com>
Reviewed-on: https://review.gerrithub.io/428447
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Normally, there will be only one separator in transport id,
for example, either ':' or '='. But the users may input
this: trtype=PCIe traddr=0000:81:00.0.
Thus, there will be two diffrent separator '=' and ':',
and our function doest not handle this case correctly.
And this patch can fix this issue, and also update the
test case.
Change-Id: Ic3f10dc1e37c66647fede37c5cf9523fc2652677
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/428307
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_bit_array_find_first_set() returns UINT32_MAX if no
set bits are found. But spdk_bit_array_find_first_clear()
would return the size of the bit array instead in this case.
(Note: the comments say size of the bit array + 1 which was
incorrect)
So this patch makes spdk_bit_array_find_first_clear()
consistent with spdk_bit_array_find_first_set() and returns
UINT32_MAX if no cleared bit is found.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I44c1e674149f8c2e87122800d5db45a2851f0bef
Reviewed-on: https://review.gerrithub.io/428225
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Splitting IO in the bdev layer is a little complex and increasing
the coverage in unit tests will be good.
Change-Id: I9d42cedc795b2804a472bdc310e936135c424fd3
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/427948
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Expected values are managed by linked list now. Hence we can set
up all expected values before starting tested split I/Os.
This change will make the logic clearer.
Change-Id: I9226619468220132aebd55a5da36490a145c128a
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/427947
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I994b5d46faffd34430cb39e66225929c4cba90ba
Reviewed-on: https://review.gerrithub.io/414935
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Connections to a subsystem may only originate on listeners
that have been explicitly allowed for the given subsystem.
Change-Id: Ib575a5803cc7af75c15d1a2c76b9866594e7a1db
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/425024
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Each file that need to check SPDK_CONFIG_* options need to include
spdk/config.h explicitly.
Change-Id: If9f2a91ac4c2b1a300dcf88ec3e2a12714ad344a
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/427221
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
We need to include it in devel package.
Change-Id: I823200632e8bcb9fdb86c8cb5fbf3a651a710b78
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/426839
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This patch is to introduce the specific QoS related structure
and the enumeration for types of QoS rate limits. Later new
types of QoS rate limits can be supported easily.
Change-Id: Idb8d2e7627fd145bf2b0ddb296c968b6b068f48c
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/424459
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Current test code works only for sequential split I/Os. The next
patch will support submitting batchedsplit I/Os.
Prepare test code as a separate patch to make review easier.
Change-Id: I05b732c9a656ecab74a2594bf50ddf42eb41584e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/425877
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When a bdev IO is split, if iovec size in a strip is more than 32,
the IO will fail.
Remove the limitation by spliting the split IO further.
Change-Id: I962ad86dfe63ea1fcd86ffa52ead7452fb80e53d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/425876
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
For single base bdev case, IO is changed not to be split. However
UT code was not changed together.
Change-Id: I81e66b256892b7bee7a42c72bb0bce6d3320b617
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/425534
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Initial support for softare AESNI_MB DPDK driver only.
Have tested (both aesni and QAT seprately and concurrrently) on underlying NVMe devices
with bdevio and a bdevperf script that runs IOs from 512B to 128K each with Q depths from
1 to 512 in powers of 2 for 30 seconds each run.
QAT can be included in the code (but not makefile) and marked as experimental
until we are ready to test in CI. It works well on 2 systems but is a big PITA to get
the hardware setup and configured for use with DPDK (IMHO).
Change-Id: If518c3df8e74e00efa18afdf194824c5e69778fc
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/403107
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
- Add independent functions to create transport with specific opts
and add to target while maintaining backward compatibility with
current apps and rpc configuration that still use the add listener
method to create a transport.
- Add new rpc function to create transport and add to target.
+ Update json reporting to include new rpc function.
+ Update python scripts to support new rpc function.
+ New nvmf test script (cr_trprt.sh) to test new rpc function.
Change-Id: I12d0a42e34c9edff757755f18a78b722d5e1523e
Signed-off-by: John Barnard <john.barnard@broadcom.com>
Reviewed-on: https://review.gerrithub.io/423590
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch just adds the call, but doesn't change behaviour of blobstore.
io unit size remains same as page size.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Idcd1b7d5126fc7cacf12c996188bd41e2c9a744d
Reviewed-on: https://review.gerrithub.io/425355
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The bdevio tests will now work on RAID volumes, so enable
RAID testing there too.
It is probably safe now to just build RAID by default, and
not require --with-raid - but let's do some more testing
with vhost and NVMe-oF against it first before we do so.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I15697f035cb688574a7ecb8be24d0c84fc622d83
Reviewed-on: https://review.gerrithub.io/423408
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Change the behavior of construct_raid_bdev RPC to be consistent with
other bdev modules.
Create a config of raid bdev first. Then create a raid bdev based
on the config.
If both succeed, the config and the raid bdev are not removed even if
any failure occur later in construct_raid_bdev RPC. Otherwise, both
are removed and return failure.
During iteration of adding base bdevs in construct_raid_bdev RPC,
- skip any nonexistent bdev and move to the next base bdev.
- if adding any base bdev fails, move to the next bdev.
- if adding base bdevs don't fail but any base bdev doesn't exist,
the raid bdev is in the configuring state and return success.
- if adding base bdev fails, the raid bdev is in the configuring state
and return failure.
- if all adding base bdevs succeed, configure the raid bdev. If configuring
the raid bdev fails, move the raid bdev to the offline state and return
failure. If configuring the raid bdev succeed, return success.
check_and_remove_raid_bdev() becomes unused in raid_bdev_rpc.c but
is still necessary in UT. Hence move this function to UT.
In UT, finding a raid bdev config by name becomes necessary. Hence
factor out the iteration to a function and use the function in UT.
Change-Id: Ifa36967bdc987d97030e3a4e36684cb37b329d4e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/423622
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When construct_raid_bdev RPC is callled, even if all adding base bdevs
to it fail, a raid bdev with no base bdev should exist and be in
the configuring state.
Extract raid_bdev_create() from raid_bdev_add_base_bdev() and put it
before starting iteration of raid_bdev_add_base_bdev().
This change cam be applied to .INI config file too.
Change-Id: Ia71aca0bbdb33049fe5bd9b8fd8163c99c032401
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/424148
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Cleverly, UT for raid bdev sets number of base bdevs by using
the random number generator.
When the random number generator outputs 1, test code especially
for single base bdev case failed.
When removing raid_bdev_send_passthru from library, the corresponding
test code was not removed.
This patch removes the test code.
Change-Id: I23be88358fe364bc757979a26398b80339e19910
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/424159
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently in the function nvme_ctrlr_start() the initialization
process is executed as a whole, in the case there are many controllers
in one system, which means other controllers must call the function
one by one. While here, we add several states here, which can
help refactoring the initialization process.
Change-Id: I209cf964bbf6e151823a7ecdc6a3f6e6e69df297
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/424157
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There is a race condition with the following sequence:
spdk_bdev_open()
spdk_bdev_unregister() <-- starts deferred message
spdk_bdev_close()
deferred message runs, crashes
Change-Id: I81fbced0849949cfb2dae5a7cc6f60c9685a8885
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/424739
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Latest scan-build finds a legitimate issue here - although
it's not clear why it was only found when testing against
a seemingly unrelated patch...
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic981f6f403c638b0b2d454c0be9f7fbe145171d9
Reviewed-on: https://review.gerrithub.io/424887
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_bdev_close() must be called on the same thread as
spdk_bdev_open(). Further, the remove callback on the
descriptor will also be run on the same thread as
spdk_bdev_open().
Change-Id: I949d6dd67de1e63d39f06944d473e4aa7134111b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/424738
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: Ib5e977b0bad15af7a2a71000c1fc4861b5b5b0af
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/424465
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was added a long time back for tracking an rte_mbuf
whose buffer was a different rte_mbuf - all related to
a userspace TCP stack that is no longer in development.
The concept isn't useful now, so remove it to reduce
the complexity of the tracing code.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I310e492eba7f55df242bb29d82fb19f6daee1f51
Reviewed-on: https://review.gerrithub.io/424565
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This issue is related to Clang assuming that global variables can be
modified from their original value.
Change-Id: I576a4af7e379a951a9f971850391c7e17145df87
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/424717
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a string name used for debugging only.
Change-Id: I9827f0e6c83be7bc13951c7b5f0951ce6c2a1ece
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/424127
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This is in response to a scan-build error introduced with clang 6.0
Change-Id: Iee5a2538ec9a6575e5b3087bf43b8ded5d099fe7
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/424576
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
The type of malloc used in some of the NVMe functions changed and has
re-introduced some scan-build failures.
Change-Id: I2055260c256429a1a2c6404a6d87605807d4170e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/424573
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
