Adding API for the bringup part of fast shutdown/startup. Adds
shared memory utilization for necessary functions during initialization.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: Iab2da102fd0ccaa56fbdb9b3c765be5eeefff145
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13349
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Stores P2L map of open bands in shared memory, allowing for
faster recovery times from application crash.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I519441af05e4d0f57768835bf01c800556873c58
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13347
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Allows for using shared memory in memory pools. Adds API for
accessing such pools after dirty shutdown (claiming them, ie.
marking an entry as actively used; calling the
ftl_mempool_initialize_ext will reclaim all unused entries back
to the pool). Also introduces API for accessing objects, since
using direct pointers is not possible (as addresses may change
inbetween application startups).
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I5325b39d68aef7e231945cee9d92c925cab2fb2a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13346
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Main use case is to allow for keeping it in shared memory, to
speed up the recovery time after application crash.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I36b6b8331cd6483c5bd202e5f9103c351d705da8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13345
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Relocation will
1. Read LBA map of a given band
2. Pin the LBAs
3. Issue writes of valid LBAsto the new location
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: Ie753a790e56a86bfa1e451b5eda78b88eeacd3cb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13344
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Multiprocess is only supported by a few libraries (e.g. NVMe driver).
Other libraries that don't support it will often fail on mempool
initialization when running as a secondary process, as the mempools are
already created by the primary process. But the error messages are
vague and don't indicate why this happened. So, this patch adds a check
to see if a mempool exists after spdk_mempool_create() fails and prints
an error message informing users that multiprocess is unsupported.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I6f915a94266e64dda380e3b269424cc579372a10
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14234
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Fixes #issue 2636.
The existing allocation method (nvmf_rdma_get_optimal_poll_group())
is traversal and unperceived link disconnection. A more fair method
considering the number of real-time connections to allocate a poll
group is implemented.
Signed-off-by: liuqinfei <18138800392@163.com>
Signed-off-by: luo rixin <luorixin@huawei.com>
Change-Id: Ic1e6283e386dbb0dd6655bedebe26aeedb16c333
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14002
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Introduce new tests for compare with metadata. Tests
if compare is successful or miscompare for both interleaved
and separated md. We test the normal io path and the
fall-back provided by the bdev layer.
Signed-off-by: Jonas Pfefferle <pepperjo@japf.ch>
Change-Id: Iaefb6d3201cd9cc800422d494c6ef7494e104afd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14133
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Add writer - tracks and manages band state transitions and write pointer as IO
is issued to it.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I5f878dc15bc1c1ac84835f75fe440672fad541d5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13335
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This ensures that when fields are added, that the
size of the structure will change, ensuring different
versions of the structure can be detected using
sizeof.
Adding -Wno-address-of-packed-member to Makefiles
here, although we should consider disabling this
warning globally in SPDK just like DPDK.
Suppress abidiff errors around spdk_app_opts -
structure size and offsets of all existing members
were unchanged, so there is no ABI breakage here.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2249eddb604d7b44180cadb92ba30edcd946b9bd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14091
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Avoid putting a new req on the outstanding_reqs
TAILQ until we know it can be initialized
successfully. This avoids adding to the TAILQ
only to remove it just after.
This allow simplifies the outstanding_reqs TAILQ
handling, since reqs are now only inserted and
removed in one place each.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5ccc41c14abd541ffcf2a602246e0671386840c7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13991
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will help keep the mixing of this code with the framework code to a
minimum.
Change-Id: I5937ebd84f32068456cdf2b9e03d3e194c760a87
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13912
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
These are 1:1 - they do not need to be separate objects.
Change-Id: I74ab52863f911d9be59ce98e1525302b5bd40846
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13910
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
ioccsz is specific for fabrics. spdk_nvme_ctrlr_is_fabrics() returns
true for custom fabrics transport. Hence we can use
spdk_nvme_ctrlr_is_fabrics() safely in nvme_ctrlr_update_nvmf_ioccsz().
Before this change, in the unit tests, ctrlr->trid.trtype was set to
zero at initialization. After this change, for most cases,
spdk_nvme_ctrlr_is_fabrics() should return false for most cases.
SPDK_NVME_TRANSPORT_PCIE did not work. Hence, initialize
ctrlr->trid.trtype by SPDK_NVME_TRANSPORT_CUSTOM_FABRICS instead.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I4bedcab4a9f2876c1c9463ff10ad0966754f1713
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13948
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Get a PD for the device from the PD pool managed by the RDMA provider
when creating a QP, and put the PD when destroying the PD.
By this change, PD is managed completely by the RDMA provider or the hooks.
nvme_rdma_ctrlr::pd was added long time ago but is not referenced
anywhere. Remove nvme_rdma_ctrlr::pd for cleanup and clarification.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: If8dc8ad011eed70149012128bd1b33f1a8b7b90b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13770
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
SPDK NVMe RDMA initiator used the default PD per RDMA device. Default PD
may be changed when all QPs for the RDMA device are destroyed and created
again.
For multipath, the RDMA zero copy feature require the PD per RDMA device
to be persistent when all QPs for the RDMA device are destroyed and
created again.
Maintain such persistent PDs in this patch.
Add two APIs, spdk_rdma_get_pd() and spdk_rdma_put_pd().
In each call of two APIs, synchronize RDMA device list with
rdma_get_devices().
Context may be deleted anytime by rdma-core. To avoid such deletion,
hold the returned array by rdma_get_devices().
RDMA device has PD, context, ref. count, and removed flag. If context
is missing in rdma_get_devices(), set the removed flag to true. Then,
if the ref count becomes zero, free the PD and the RDMA device.
The ref. count of a RDMA device is incremented when spdk_rdma_get_pd()
is called and decremented when spdk_rdma_put_pd() is called.
To simplify synchronization, sort the returned array by
rdma_get_devices().
To avoid resource leakage, add destructor function and free all PDs
and related data at termination.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I093cb4ec2c7d8432642edfbffa270797ccf3e715
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13769
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
There may be for_each operations outstanding on an
io_device when it is unregistered. Currently we just
return when this happens, not unregistering the
device but also not notifying the caller that this
happened (since it returns void, and the callback
function doesn't have a status parameter either).
We could just push this responsibility to the caller,
to never unregister an io_device if it knows it has
outstanding for_each calls waiting to complete. But
I think we can simplify this a lot by just handling
this inside of the thread library. Mark that the
device is pending registration, and unregister it
(on the original requesting thread!) when the
for_each count gets back to zero. Also don't
allow any new for_each operations either.
Note this requires a bit of refactoring on the
thread unit tests, since it is now possible to
unregister a device with outstanding for_each
operations.
Fixes issue #2631.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I978f2d99a25e65d2b7d71ce9b1926a79a6c94263
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13890
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When decoupling a snapshot from its parent, we need to clear its parent.
So we should remove the xattr BLOB_SNAPSHOT. Modifying the xattrs of a blob
only works if its metadata are not in read-only mode.
By default, a snapshot is in read-only mode so this operation fails. When we
later want to delete the snapshot, we will see that it has a parent, so we will
try to remove the snapshot from its parent's clones list. This will cause a
crash.
The fix is to remove the BLOB_SNAPSHOT xattr only after setting the snapshot's
metadata in rw mode.
Signed-off-by: Alex Michon <amichon@kalrayinc.com>
Change-Id: I80efa6dd3dcb38b4c738ce2e97aa2ffc281cefa5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13723
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
the sizeof(g_vals) should be the num of array, not the num of bytes. see follow:
CU_ASSERT(spdk_json_parse(g_buf, sizeof(in) - 1, g_vals, sizeof(g_vals), &g_end, flags | SPDK_JSON_PARSE_FLAG_DECODE_IN_PLACE) == num_vals);
Fixes#2623
Signed-off-by: tongkunkun <tongkunkun_yewu@cmss.chinamobile.com>
Change-Id: I3b7994606284fe3464650337ecb0f723a627f7aa
Reported-by: Jim Harris <james.r.harris@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13841
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In prep for upcoming patch that will provide an RPC to override
and automatic assignment of an op code to an engine.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I17d4b962fb376a77f97ce051a513679d0fba698e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12829
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is another preparation to create and use ibv_context and pd.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Signed-off-by: Denis Nagorny <denisn@nvidia.com>
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: Id594fa1ccb2daf535b1aaaef0a397bda2ec98578
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13710
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The function `nvme_ctrlr_init_ana_log_page` is exactly
same with `nvme_ctrlr_update_ana_log_page`, so remove it.
Change-Id: I1ad51635f47cf95cfa6de217e3b9144885c3b74e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13652
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
allow DSA device to async offload crc32 calculation in nvmf-TCP
This patch can use DSA to accelerate crc32 computation, making
the io performance of TCP paths using crc32 approach the io
performance of TCP paths that do not use crc32.
Using SLIST to minimize the performance drop. SLIST has less
operation compared to TAILQ.
Thinking about memory thrashing, we should use the same memory as
possible to receive new PDUs. So, insert newly freed PDU in to head
is better.
The performance drop is within 1% compared to the TCP path without
crc32.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: I480eb8db25f0e730cb198ca5ec19dbe3b4d38440
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11708
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Original implementation creates pollers and CQs for all discovered
devices at poll group creation. Device (ibv_context) that has no
references, i.e. has no QPs, may be removed from the system and
ibv_context may be closed by rdma_cm. In this case we will have a CQ
that refers to closed ibv_context and it may crash in ibv_poll_cq.
With this patch pollers are created on demand when we create the first
QP for a device. When there are no more QPs on the poller, we destroy
the poller. This also helps to avoid polling CQs that don't have any
QPs attached.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I46dd2c8b9b2902168dba24e139c904f51bd1b101
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13692
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When a bdev is registered, it is examined by the bdev modules before the
bdev register even is notified.
Examination may be asychronous, e.g. when the bdev module has to perform
I/O on the new bdev.
This causes a race condition where the bdev might be destroyed while
examination is not finished. Then, once all modules have signaled that
examination is done, `bdev_register_finished` makes an invalid access to
the freed bdev pointer.
To fix this, defer the unregistration until the examine is completed by
opening a descriptor on the bdev.
Change-Id: I79a2faa96c1c893fc1cee645fbe31f689b03ea4a
Signed-off-by: Nathan Claudel <nclaudel@kalray.eu>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13630
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This avoids confusion with the public idxd.h
header file which causes problems with abidiff.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7910c93d9d95b99c82f4dfdba845e6804e1b6568
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13729
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When `dif_insert_or_strip` is enabled, NVMf library will do
DIF insert and strip automatically, client isn't aware of
it, when `dif_insert_or_strip` is disabled, we will report
Namespace E2E Protection Capabilities to client, but we
don't process PRACT and PRCHK flags in NVMf library, so
here we don't report the capabilities to client and leave
the use of extended LBA buffer to users.
Change-Id: Ic610dc65fef210a7799c6ab693d89138b99e1193
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12165
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Some of the options in sock_impl_opts could be different for different
sockets (even if they're using the same impl). However, outside of a
few selected options (recv_buf_size, send_buf_size), there was no
interface to change them.
This change will allow users to change impl_opts on a per-socket basis
when creating a socket. Sockets created through accept() inherit
impl_opts from the listening socket.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I7628ae19def25cef6ffa62aa54bd34e446632579
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13661
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Also remove ftl_mngt_get_status() because it won't be necessary now.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I335831cb1c506379e9afeb0bf87f1f873033073d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13668
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
That is possible to get/set registers from any thread,
during regs processing we are polling admin qpair to
get a completion. At the same time, another thread
can also poll admin qpair and that can lead to
undefined behavior.
This patch fixes an issue when bdev_nvme is configured
with io_timeout. If remote target becomes unresponsive
(e.g. due to link down), IO timeout occurs and bdev_nvme
tries to get csts registers in timeout_cb. At the same
time another thread can process adminq, so we may have
2 simultaneous adminq polls. If admin qpair is disconnecting
at that time (RDMA transport) we may destroy resources
twice from different threads.
We don't see a problem with set_regs function but it
won't be redundant to lock mutex in set_regs as well.
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: I7ec3984d25d0249061005533d13b22315b44ddf2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13687
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Other parts have changed these since readv and writev
support ext_opts.
And change corresponding unittest.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I79260a7e6110aa46df2016e579f1da5c241c9844
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13620
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This function processes and completes asynchronous write requests, so it
makes sense to rename it. This is done in preparation for handling
asychronous read requests.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I3f36631dc24a3170204aaaba56f4968be0672fe5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12172
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In the multi-process case, a process may call `spdk_nvme_ctrlr_free_io_qpair` on
a foreign I/O qpair (i.e. one that this process did not create) when that qpairs
process exits unexpectedly.
The variable `qpair->poll_group` isn't multi-process safe, we can't use it
in `spdk_nvme_ctrlr_free_io_qpair` and related transport poll group APIs.
Change-Id: Ic13a6a2c7d760477be5be5a56a45caa2b5518717
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13573
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
It will not find the h2c related reqs in the tailq now.
We can get it from tqpair->reqs directly.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: I25f0900e875b054d7617450477e9719e7a59aa18
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12861
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This follows similar logic in the pcie and tcp
completion paths, including omitting error
messages when aborting aers by adding a print_on_error
parameter to the completion function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id558d0af2cdd705dfb60abb842bd567a0949ccce
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13525
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
By default, the SPDK nvmf target reports vid==INTEL,
which results in the SPDK nvme driver trying to enable
Intel vendor-specific log page. Fix this by trying to
enable those log pages only for PCIE transport
controllers.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I78ebf365d4fa6295d1f610697266c3ead765988d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13524
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
We can only get to this code path if the controller
has vid==INTEL, so make that more clear by changing
the check to an assert.
Remove unit test that calls
nvme_ctrlr_construct_intel_support_log_page_list()
for a controller that is not VID==INTEL - this is
no longer valid.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3b58451bc95992bf641e7452f0ac4c2bac9fe31c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13523
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
This follows similar logic in the pcie completion
path, including omitting error messages when aborting
aers by adding a print_on_error parameter to the
completion function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I96df72280bb8fcbee3847fdc27f38e14a1bf3251
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13522
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
nvme_qpair_abort_all_queued_reqs() aborts error injections, queued
requests, aborting queued requests, and outstanding requests. (Aborting
outstanding requests depends on transports.) However, it did not abort
queued aborts.
Include nvme_ctrlr_abort_queued_aborts() into
nvme_qpair_abort_all_queued_reqs() to do really the name of the
function indicates.
nvme_ctrlr_abort_queued_aborts() has been called in a few cases, but
we do not care duplication.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I19102cc6603a72ce5c398a7947cb4d606b692991
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12849
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Vasuki Manikarnike <vasuki.manikarnike@hpe.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Fix issue: #2561
The issue here is that in the bdev_set_qd_sampling_period RPC
command, the QD sampling period has been set. Then later the
related Desc is closed and in the bdev_close() function the
QD sampling period is reset to 0.
A new QD desc is added as the QD sampling period update could
be handled properly.
Meanwhile, a new QD Poll In Progress flag is also added so as
to indicate there are ongoing events of QD sampling and the
Bdev unregister will be handled in the proper way.
Related test case and unit test also updated for this change.
Change-Id: Iac86c2c6447fe338c7480cf468897fc8f41f8741
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13016
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
The bdev_lvol_grow_lvstore will grow the lvstore size if the undering
bdev size is increased. It invokes spdk_bs_grow internally. The
spdk_bs_grow will extend the used_clusters bitmap. If there is no
enough space resereved for the used_clusters bitmap, the api will
fail. The reserved space was calculated according to the num_md_pages
at blobstore creating time.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: If6e8c0794dbe4eaa7042acf5031de58138ce7bca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9730
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reserve space for used_cluster bitmap. The reserved space is calculated
according to the num_md_pages. The reserved space would be used when
the blobstore is extended in the future.
Add the num_md_pages_per_cluster_ratio parameter to the
bdev_lvol_create_lvstore API. Then calculate the num_md_pages
according to the num_md_pages_per_cluster_ratio and bdev total size, then
pass the num_md_pages to the blobstore.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: I61a28a3c931227e0fd3e1ef6b145fc18a3657751
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9517
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In SPDK, declarations have the return type on the same line. Definitions
have the return type on a separate line. Astyle has an option for
enforcing this. Unfortunately, it seems to have two bugs:
1) It doesn't work correctly at all on C++ files.
2) It often fails on functions that return enums, or long type names
Deal with 1) by adjusting the check_format.sh script to only tell astyle
to fix return type line breaks for C files and not C++. Deal with 2) by
adding a few typedefs to work around the problem.
Change-Id: Idf28281466cab8411ce252d5f02ab384166790c6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13437
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
gcc 12 reports that strnlen() exceeds the bound set by maxlen argument.
This patch changes to strlen() to silence the following error:
lvol_ut.c: In function ‘lvs_load’:
lvol_ut.c:1086:56: error: ‘strnlen’ specified bound 64 exceeds source size 4 [-Werror=stringop-overread]
1086 | spdk_blob_set_xattr(super_blob, "name", "lvs", strnlen("lvs", SPDK_LVS_NAME_MAX) + 1);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I56caf5bbb06fa0ea2cc61a9eef145fc275a416b2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13413
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
It's useful to add these APIs.
spdk_copy_iovs_to_buf and spdk_copy_buf_to_iovs.
It prepares that other ones can call these.
We don't need to define them in static state
repeatedly.
And add corresponding unit tests.
Change-Id: Ife40fec8d047a48af67b04e6c055e4932282abfb
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12075
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Calculation of the ANA log page size should use the
identify ctrl MNAN field
(maximum number of allowed namespaces)
not the NN (maximum valid nsid value).
An ANA-enabled controller must have a non-zero MNAN value,
see NVMe Base Specification, Figure 251,
therefore nvme_ctrlr_init_ana_log_page() may safely use MNAN.
Since NN might be much higher than MNAN,
ANA log size based on NN may results in a very large
log page and cause a failure to get ANA log,
e.g. if it is larger than the controller's MDTS.
Fix: replace cdata->nn with cdata->mnan
in nvme_ctrlr_init_ana_log_page()
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Change-Id: I2a522dca833a27dddad25848d7688efa23d23091
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13039
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
DPDK CFLAGS get put into CFLAGS in mk/cc.flags.mk,
which for system package installed DPDK will include
extra paths like /usr/include/<arch-3-tuple>/dpdk.
If a Makefile adds its own CFLAGS before including
the .mk fragment that pulls in these CFLAGS, we won't
actually get those cc.flags.mk applied since they
are defined with ?=.
This may need to be revisited - using ?= for these
has evolved through several iterations of our SPDK
configured flag files - starting with commit
08ec96eb. But for now, let's just fix these few
Makefiles.
Fixes issue #2548.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9863db1b37b31907b4088f58cc13b81ed1bb8632
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12982
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Many open source projects have moved to using SPDX identifiers
to specify license information, reducing the amount of
boilerplate code in every source file. This patch replaces
the bulk of SPDK .c, .cpp and Makefiles with the BSD-3-Clause
identifier.
Almost all of these files share the exact same license text,
and this patch only modifies the files that contain the
most common license text. There can be slight variations
because the third clause contains company names - most say
"Intel Corporation", but there are instances for Nvidia,
Samsung, Eideticom and even "the copyright holder".
Used a bash script to automate replacement of the license text
with SPDX identifier which is checked into scripts/spdx.sh.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaa88ab5e92ea471691dc298cfe41ebfb5d169780
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12904
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: <qun.wan@intel.com>
There are a few places where a typo, extra character
or newline was added to the BSD 3-clause license text
which made it differ very slightly from the rest of
the license headers in the source tree. Remove those
differences in this patch, to help with automation of
SPDX identifier replacement in the next patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I542dc53cd252b1699253fd6dcc3ccac9643d7878
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12905
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This SGL type was missed in the original commit
that added the pretty printing.
Fixes: 4d9ab1e9a1 ("nvme: pretty print dptr")
Reported-by: Ramanjaneya Burugula <burugula@gmail.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibc655db4e65009071f39f55f691c94a094cea0bc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12705
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This patch adds virtio_blk abstraction for custom transports,
with the 'vhost_user_blk' first one being used.
Added spdk_virtio_blk_transport_ops describing the nessecary
callbacks to be implemented by each transport.
Please use SPDK_VIRTIO_BLK_TRANSPORT_REGISTER to register the transport.
Transports can use virtio_blk_process_request() to process the
incoming I/O from their queues.
virtio_blk_create_transport RPC was added to create one of the
registered transports, possibly with custom JSON arguments.
Added 'transport' argument to vhost_create_blk_controller RPC,
to specify which transport should create the controller.
By default the vhost_user_blk transport is used.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ic9d93a6e0f483796eb56b7174a678e41a6ea4808
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9540
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
As of right now the UT always used the empty struture of
struct spdk_vhost_dev_backend during the test. This meant
VHOST_BACKEND_BLK.
alloc_vdev() will require further changes to test both types
of backends. So for now change it to VHOST_BACKEND_SCSI,
since it currently does not touch any fields outside of the
struct spdk_vhost_dev.
Meanwhile next patch will do so for blk backend.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib5af7520bc8a21a7af03b810d4cc42726797a331
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12749
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Vhost library was not initialized as part of the test,
it will become necessary later in the series.
Suite startup/cleanup have no matching CUnit test case,
so only assert() can be used. Rather than CU_ASSERT().
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ieaa3d2f6b6f1899105362181f285f585ff9724d7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10945
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If compress driver doesn't support SGL input of output
then we need to copy user's buffers into reduce internal
buffers
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I0c07243a5b668d0e0adcc153e5b573f59c26ab64
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12281
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reduce library allocates one big chunk of memory and
then splits it between requests. The problem is that
a chunk of memory assigned to a request may cross huge
page boundary and if compress driver doesn't support
SGL input of output, operation will be failed.
To avoid this problem, align buffer start on 2MiB
and check each chunk of memory if it crosses huge page
boundary.
Fixes issue #2454
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ie730b8ba928f27a43bde1222b6c18d29b797575a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12249
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
ext_io_opts uses the size member to allow backwards
compatibility however currently we only check if it is
below or equal the current size of the opts struct and
that it is not 0. size is only used when we copy opts
because of split or push/pull.
This patch introduces size checks to allow safe access
to e.g. metadata and memory domain pointers of the user
provided opts pointer. The minimum size of the struct
passed is now the size of the initial version of
spdk_bdev_ext_io_opts. To not introduce additional
checks when opts are consumed by a bdev module we
now always copy if the size is smaller than the
current opts struct size.
When introducing new members to opts additional
checks might be needed if those are directly accessed
through the passed pointer or bdev_io->internal.ext_opts.
Change-Id: Ibd181a5840a3d5022018a9f61403df961ffd6e1d
Signed-off-by: Jonas Pfefferle <pepperjo@japf.ch>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12550
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
During ctrlr reconnection, spdk_nvme_ctrlr_reconnect_poll_async()
is executed by a non-timed poller.
We should poll adminq more often during ctrlr disconnection too.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ib1f5b41015aed20deda8df6f2c837981ac233c04
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12615
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
As described in the NVMe specification, a controller level reset
includes the following actions:
- the controller stops processing any outstanding admin or I/O
commands;
- all I/O SQs and CQs are deleted.
In a full controller reset sequence for a PCIe controller, if we do
a controller level reset first, we can abort outstanding commands
after the hardware has actually been stopped.
For NVMe-oF controller, each I/O qpair is an independent network
connection and is disconnected safely. We do not want to change
NVMe-oF controller.
Fixes the issue #2360
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: If05febac74705bfd3df5abd15064c1203126e027
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12447
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
As described in the previous patches, we need to delete all I/O
SQ/CQs before aborting trackers when disconnecting a controller.
The following patches reorder the operations. This patch changes
adminq disconnection to initiate a Controller Level Reset and
adminq completion processes it if ctrlr->is_disconnecting is true.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I64f06bae2ce8a9127124029fd042db0028198e3c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12560
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
When a new cluster is added to a thin provisioned blob,
md_page is allocated to update extents in base dev
This memory allocation reduces perfromance, it can
take 250usec - 1 msec on ARM platform.
Since we may have only 1 outstainding cluster
allocation per io_channel, we can preallcoate md_page
on each channel and remove dynamic memory allocation.
With this change blob_write_extent_page() expects
that md_page is given by the caller. Sicne this function
is also used during snapshot deletion, this patch also
updates this process. Now we allocate a single page
and reuse it for each extent in the snapshot.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I815a4c8c69bd38d8eff4f45c088e5d05215b9e57
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12129
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
To fix issue: #2484
When unregistering the bdev, will send out the message
to each thread to abort all the IOs including IOs from
nomem_io queue, need_buf_small queue and need_buf_large queue.
The new SPDK_BDEV_STATUS_UNREGISTERING state is newly
added to indicate this unregister operation.
In this case, the bdev unregister operation becomes the
async operation as each thread will be sent the message
to abort the IOs and as the last step, it will unregister
the required bdev and associted io device.
On the other hand, the queued_resets will be handled
separately and not aborted in the bdev unregister.
New unit test cases are also added:
enomem_multi_bdev_unregister: to abort the IO from
nomem_io queue during the unregister operation
bdev_open_ext_unregister: to handle the events and
async operations from the unregister operation
Change-Id: Ib1663c0f71ffe87144869cb3a684e18eb956046b
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12573
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
By default, failback to the preferred I/O path is done automatically
if it is restored. Some users may want to keep using the backup I/O
path even if the preferred I/O path is restored. In this case,
bdev_nvme_set_preferred_path can be used to do manual failback.
We may be able to clear/fill I/O path cache more strictly but it will
be complicated and have bugs. This patch does the minimal change,
just skips an apparent case.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I78fe5faee6ff04e88ae3d7c6be6da1c20637c912
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12431
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The new blobstore ext API is used when the user
provides ext_io_opts in bdev layer.
To store blobstore ext_io_opts, vbdev_lvol reports
non-zero get_ctx_size in bdev module interface.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I64076b5369533be0c1d69ca48aef9d70a9abe488
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11373
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
These function accept optional spdk_blob_ext_io_opts
structure. If this structure is provided by the user
then readv/writev_ext ops of base dev will be used
in data path
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I370dd43f8c56f5752f7a52d0780bcfe3e3ae2d9e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11371
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Introduce spdk_blob_ext_io_opts structure which
is used in the new *_ext functions.
Zeroes dev is updated with implementation of
readv_ext which uses memory domains memzero
or regular memset().
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Id94542196eff999827bf00591fd43804256fccb4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11369
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
In the following patches, nvme_ctrlr_process_init() will be used to
disable the controller when disconnecting the admin qpair for PCIe
transport. In this case, we will have to exit nvme_ctrlr_process_init()
after CSTS.RDY is 0. However, spdk_nvme_ctrlr_reset() and
spdk_nvme_ctrlr_reconnect_poll_async() have to continue
nvme_ctrlr_process_init() until the controller becomes ready.
To differentiate stop and continue clearly, add a new state
NVME_CTRLR_STATE_DISABLED to enum nvme_ctrlr_state.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ic0a5fb7114d4eeb1cefec28bc404184768fb0a96
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12613
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We enable multiple engines by:
* getting rid of the globals that point to the one available HW
and one available SW engine
* adding a submit_tasks() entry point for the SW engine so that
it is treated like any other engine allowing us to just call
submit_tasks() to the assigned engine for the opcode instead of
checking what is supported
* changing the definition of engine capabilities from
"HW accelerated" to simply "supported"
* during init, use a global (g_engines_opc) that contains engines
and is indexed by opcode so we know what the best engine is for each
op code
* future patches will add RPC's to override engine priorities or
specifically assign an opcode(s) to an engine.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I9b9f3d5a2e499124aa7ccf71f0da83c8ee3dd9f9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11870
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
The NVMe bdev module supported active-passive policy for multipath mode
first. By this patch, the NVMe bdev module supports active-active policy
for multipath node next. Following the Linux kernel native NVMe multipath,
the NVMe bdev module supports round robin algorithm for active-active
policy.
The multipath policy, active-passive or active-active, is managed per
nvme_bdev. The multipath policy is copied to all corresponding
nvme_bdev_channels.
Different from active-passive, active-active caches even non_optimized
path to provide load balance across multiple paths.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ie18b24db60d3da1ce2f83725b6cd3079f628f95b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12001
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
If we specify a preferred path manually for each NVMe bdev, we will
be able to realize a simple static load balancing and make the failover
more controllable in the multipath mode.
The idea is to move I/O path to the NVMe-oF controller to the head of
the list and then clear the I/O path cache for each NVMe bdev channel.
We can set the I/O path to the I/O path cache directly but it must be
conditional and make the code very complex. Hence, let find_io_path() do
that.
However, a NVMe bdev channel may be acquired after setting the preferred
path. To cover such case, sort the nvme_ns list of the NVMe bdev too.
This feature supports only multipath mode. The NVMe bdev module supports
failover mode too. However, to support the latter, the new RPC needs to
have trid as parameters and the code and the usage will be come very
complex. Add a note for such limitation.
To verify one by one exactly, add unit test.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ia51c74f530d6d7dc1f73d5b65f854967363e76b0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12262
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: <tanl12@chinatelecom.cn>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_bdev_get_acwu() is a 1-based number, so we need
to subtract 1 from it before assigning the value to
nsdata->nacwu.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I32708b28a35670cba6013a48b79389fa48226285
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12399
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When sending a fused compare and write command, we pass a callback
bdev_nvme_comparev_and_writev_done that we expect to be called twice
before marking the io as completed. In order to detect if a call to
bdev_nvme_comparev_and_writev_done is the first or the second one, we
currently rely on the opcode in cdw0. However, cdw0 may be set to 0,
especially when aborting the command. This may cause use-after-free
issues and this may call the user callbacks twice instead of once.
Use a bit in the nvme_bdev_io instead to keep track of the number of
calls to bdev_nvme_comparev_and_writev_done.
Signed-off-by: Alex Michon <amichon@kalrayinc.com>
Change-Id: I0474329e87648e44b08998d0552b2a9dd5d34ac2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12180
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds an extra spdk_thread_send_msg() call to destroy a qpair
to make sure that it isn't freed from the context of a socket write
callback. Otherwise, spdk_sock_close() won't abort pending requests,
causing their completions to be exected after the qpair is freed.
Fixes#2471
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ia510d5d754baccca1e444afdb10696ab9b58e28b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12332
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There is a race condition when a bdev is unregistered while reset is
submitted from the upper layer very frequently.
spdk_io_device_unregister() may fail because it is called while
spdk_for_each_channel() is processed.
spdk_io_device_unregister io_device bdev_Nvme0n1 (0x7f4be8053aa1)
has 1 for_each calls outstanding
To avoid this failure, defer calling spdk_io_device_unregister() until
reset completes if reset is in progress when unregistration is ready
to do, and then reset completion calls spdk_io_device_unregister()
later.
A bdev cannot be opened if it is already deleting. So we do not need
to hold mutex.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ida1681ba9f3096670ff62274b35bb3e4fd69398a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12222
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Previously, if a namespace is in ANA inaccessible state, I/O had been
queued infinitely. Fix this issue according to the NVMe spec.
Add a temporary poller anatt_timer and a flag ana_transition_timedout for
each nvme_ns.
Start anatt_timer if the nvme_ns enters ANA transition. If anatt_timer
is expired, set ana_transition_timedout to true. Cancel anatt_timer or
clear ana_transition_timedout if the nvme_ns exits ANA transition.
nvme_io_path_become_available() returns false if ana_transition_timedout
is true.
Add unit test case to verify these addition.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ic76933242046b3e8e553de88221b943ad097c91c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12194
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
This reduces a lot of casting.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ibc04f422858642d0e20c9b020bb6c5d1b70256fe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11534
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
The code to handle the lingering qpair when deleting it was really
complicated.
The RDMA transport can connect or disconnect qpair asynchronously.
Then we can include the code to handle the lingering qpair into the
code to disconnect qpair now.
If the disconnected qpair is still busy, defer completion of the
disconnection until qpair becomes idle.
If poll group is not used, we can complete disconnection immediately
because cq is already destroyed.
The related data and unit test cases are not necessary anymore.
So delete them in this patch.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ic8f81143fcad0714ac9b7db862313aa8094eeefb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11778
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add three states, INITIALIZING, EXITING, and EXITED to the rqpair
state.
Add async parameter to nvme_rdma_ctrlr_create_qpair() and set it
to opts->async_mode for I/O qpair and true for admin qpair.
Replace all nvme_rdma_process_event() calls by
nvme_rdma_process_event_start() calls.
nvme_rdma_ctrlr_connect_qpair() sets rqpair->state to INITIALIZING
when starting to process CM events.
nvme_rdma_ctrlr_connect_qpair_poll() calls
nvme_rdma_process_event_poll() with ctrlr->ctrlr_lock if qpair is
not admin qpair.
nvme_rdma_ctrlr_disconnect_qpair() returns if qpair->async is true
or qpair->poll_group is not NULL before polling CM events, or polls
CM events until completion otherwise. Add comments to clarify why
we do like this.
nvme_rdma_poll_group_process_completions() does not process submission
for any qpair which is still connecting.
Change-Id: Ie04c3408785124f2919eaaba7b2bd68f8da452c9
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11442
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_vhost_dev structure should only contain generic fields
that are to be used by either vhost, vhost_blk or vhost_scsi
layer.
The vhost_user backend can hold its properties in
spdk_vhost_user_dev, which is maintained within rte_vhost.
Both structures contain references back to each other.
The reference in spdk_vhost_dev is a void pointer to
allow future transports to keep the reference
to their own structures.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I68640c524426d885c20242146365ba242fa9df8e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11813
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
In support of upcoming patches and to greatly simplify things,
the capabilites enum which held bit positions for each opcode
has been removed. Only the opcodes enum remains and thus only
opcodes are used throughout. For the capabiltiies bitmap a helper
function is added to convert from opcode to bit position. Right
now it is used in the IO path but in upcoming patches that goes away
and the conversion is only done at init time.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ic4ad15b9f24ad3675a7bba4831f4e81de9b7bc70
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11949
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Previously spdk_vhost_dev_backend held callbacks
for vhost_blk and vhost_scsi functionality, along
with ones that are called by the vhost_user backend.
This patch separates out those callbacks into two
structures:
- spdk_vhost_dev_backend - to be implemented by vhost_blk
and vhost_scsi
- spdk_vhost_user_dev_backend - is only implemented by
vhost_user backend, callbacks for session managment
specific to that transport
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I348090df5dddeb2b1945b082b85aec53d03c781b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11812
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
there is no group
The real implementation handles this by returning -ENOENT, so do the
same in the test.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I405b6f60bf4dcdb22c57e48bbaf66d57522a49c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11508
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Count disconnecting a queue pair as activity so that the unit test
poll_threads() calls don't bail out until the disconnectedd_qpair_cb is
called at least once.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Idc437d6c589dbf133bfcbb5edba1087f928a718c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11507
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
This was neither set nor used.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I3119135843c5fc0b8724e593db40df46e6b5bdb0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12097
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The concat module can combine multiple underlying bdevs to a single
bdev. It is a special raid level. You can add a new bdev to the end of
the concat bdev, then the concat bdev size is increased, and it won't
change the layout of the exist data. This is the major difference
between concat and raid0. If you add a new underling device to raid0,
the whole data layout will be changed. So the concat bdev is extentable.
Change-Id: Ibbeeaf0606ff79b595320c597a5605ab9e4e13c4
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11070
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To execute a callback function for each registered bdev or unclaimed
bdev, add new public APIs, spdk_for_each_bdev() and
spdk_for_each_bdev_leaf().
These functions are safe for race conditions by opening before and
closing after executing the provided callback function.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I59b702ffec7b4fc5e9779de5a3a75d44922b829b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12088
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use spdk_bdev_readv/writev_block_ext even when
there is no ext opts passed by bdev layer
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I0b9f17150cdba1a1023478bae745ab4438ea99bb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10070
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
That is a preparation for support of memory domains
in bdev_raid
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I3a6e01eccd4d7e4bc197dc5ffe268d42081d41de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11429
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
memory domains
If bdev doesn't support any memory domain then allocate
internal bounce buffer, pull data for write operation before
IO submission, push data to memory domain once IO completes
for read operation.
Update test tool, add simple pull/push functions
implementation.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ie9b94463e6a818bcd606fbb898fb0d6e0b5d5027
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10069
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Replace spdk_bdev_get_by_name() + spdk_bdev_unregister() by
spdk_bdev_unregister_by_name() wherever possible.
This simplifies the code and makes the code more reliable.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I91388c9d0b2e244cb745720a480803b03c42a226
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12066
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To unregister a bdev more correctly, we had to call
spdk_bdev_open_ext(), spdk_bdev_desc_get_bdev(), spdk_bdev_unregister(),
and then spdk_bdev_close(). This was correct but complicated.
Hence add a new public API spdk_bdev_unregister_by_name() which does
the whole correct sequence of bdev unregistration.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I9068d4ac49dca944436e0ba587308fd356dfef75
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12065
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The process of matching qpair to poll group is split into
two distinct parts that occur on different threads.
See spdk_nvmf_tgt_new_qpair().
This results in a race condition for TCP between spdk_sock_map_lookup()
and spdk_sock_map_insert(), which are called in spdk_nvmf_get_optimal_poll_group()
and spdk_nvmf_poll_group_add() respectively.
Fixes#2113
This patch picks a hint from nvmf_tcp for next poll group,
which is then passed down to spdk_sock_map_lookup().
When matching placement_id exists, but does not have
a poll group assigned - the hint will be used.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I4abde2bc9c39225c9f5dd7c3654fa2639bb0a27f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10271
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The rdma buffer for stripping DIF metadata is added. CPU strips the DIF
metadata and copies it to the rdma buffer, improving the rdma write
bandwith. The network bandwidth during 4KB random read test is increased
from 79 Gbps to 99 Gbps, the IOPS is increased from 2075K to 2637K.
Fixes issue #2418
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Change-Id: If1c31256f0390f31d396812fa33cd650bf52b336
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11861
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When iovs are copied from bounce or to bounce, the bounce is usually
alloced from data_buf_pool for better performance, and is multi iovs
instead of a single buffer. Therefore, block-aligned bounce are
supported.
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Change-Id: If56b21d9e46c73d4c956c227bec33ddd0ab9745b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11860
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
spdk_sock_map_insert() allows for allocating a sock_map
entry, without assigning any sock_group.
This is useful for cases where placement_id determined
by the component using spdk_sock_map_*. See PLACEMENT_MARK mode.
Placement_id's are allocated first, then an empty one is found
using spdk_sock_map_find_free().
Since the above is a valid use case, then entry in sock_map
can exist without a group assigned. spdk_sock_map_lookup() has
to handle such cases, rather than trigger an assert.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia717c38fef5e71fe44471ea12f61a5548463f0cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10725
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: wanghailiang <hailiangx.e.wang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The usage of internal API for sock_map was not unit tested,
so far.
This patch adds first set of UT for the sock_map,
expanding it and fixing some issues later in the series.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Idfce8e19668a87f1d45d73310edb17d71d9f8bd8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10724
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
As we now only support a single WQ, there's no need for a teble of
them and no need to assert that the stride from WQ to WQ is the
same as the WQ struct size.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I205f36aae22070f532653726dd75249bbafbe3ef
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12081
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
First in a series of patches that will enable multiple engines
to exist at once and choose the best one based on their priorities
and capabilites, the public API will no longer be needed.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia87b83aa2263745a94a822a160b6e97bb2e0dc19
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11948
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
With recent changes libreduce should provide correct buffers
if the driver doesn't support SGL in/out. This patch verifies
that we don't use SGLs when they are not supported.
Since even a single buffer can be split on 2MB page
boundary, it is not enough just to check iovs count.
Added asserts that the first elements of mbufs are
not null to avoid scan build errors
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I620e43bf5b1abd25cab412fe08346a6d767c9be9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11973
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
rte_pktmbuf_free frees the given mbuf and any chained mbufs.
It can cause double free of some mbuf if we free every mbuf
in a loop. Instead use rte_pktmbuf_free_bulk which correctly release
chained mbufs.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I55fd7832ff656f519a4ed2f02de8ef1a0f637a02
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11972
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In the compression operation we may have SGL input
if user's buffer is fragmented or less than chunk_size.
If the backing device doesn't support SGL input then
we should copy user's buffers into decomp_buffer
(including paddings if any).
In the decompression operation, if the backing device
doesn't support SGL output, we use a single output buffer
which is pointing to decomp_buffer. Once the operation
completes, we should copy the result into user's buffers.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ic7fddd38374bb6898256633eacd192dbaf36541a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11970
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The driver always creates a single group containing all of the engines
and a single work queue.
Change-Id: I83f170f966abbd141304c49bd75ffe4608f5ad03
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11533
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
It is not used for anything.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I1d967b2d0e404756f7ceda98ddc4ee9017ec83f7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11489
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
It turns out that this can stay on the stack.
Change-Id: I961366307dae5ec7413a86271cd1dfb370b8f9f3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11488
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
These aren't ever accessed in the main I/O path, so we can read them in
whenever we need them and make the code a lot simpler.
Change-Id: Icfdbfe9f2d9db13f4d0d28b2b4103cd0c443bcf4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11485
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This is no longer needed.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I08c788ca0451e739804b568d613c1e52e071c61f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11794
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Fill is sent in as a uint8, we need to populate the full uint64
input with the uint8 pattern or we'll get a miscompare. This is
how idxd was doing it, instead of adding the same code to ioat just
move it up a layer.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia4aab1c6230f35ab88bb8a0e3b8e16dbd93007c7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11947
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
- Fixed duplication of key, key2, drv_name, cipher, etc., fields in
struct bdev_names and struct vbdev_crypto. Moved all of them into
the new struct vbdev_crypto_opts, which is re-used by both structs.
This aslo removes duplication in error handling and fininalization
logic that checks the keys are zeroed out and properly freed.
- Moved unhexlify into vbdev rpc code. All keys passed to vbdev
already in the binary form.
- Provide meaningful error messages in the rpc response on keys
validation issues during setup of crypto vbdev.
- Updated unit tests.
Signed-off-by: Yuriy Umanets <yumanets@nvidia.com>
Change-Id: I1fab8771bbbc0cd2f359f0d105fec28fb86893b3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11631
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
That is done to correctly handle metadata pointer which is part
of ext_opts structure. It will also be used by the next patch to
remove memory_domain pointer if request which uses local buffers
is split
Force the user to set correct ext_opts size, update API functions
description.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I77517d70df34a998d718cc6474fb4c538a42918f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11349
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Bdev modules must not access internal bdev_io
structure, so add a new pointer in a public
section. Pointer in internal section will be
used in next patch
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ib631563015b3e5fa9300d22b7ae59d8db43c8275
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10421
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is a preparation for enabling of memory domains
pull/psuh functionality. Since memory domains API is
asynchronous, this patch makes asynchronous operations
with bounce buffers.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ieb1f2a0c151149af58cfd7607dbde4c76c3c288d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10420
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
SPDK has settled on what the optimal DSA configuration is, so let's
always use it.
Change-Id: I24b9b717709d553789285198b1aa391f4d7f0445
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11532
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
The names on these were changed.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ib75a60342c08f72dad39635a9244421c1cca5485
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11793
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add a new flag is_disconnecting to struct spdk_nvme_ctrlr.
Separate calling nvme_ctrlr_disconnect() and nvme_ctrlr_disconnect_done()
by using the flag is_disconnecting.
Additionally, change nvme_ctrlr_fail() to skip setting ctrlr->is_failed
to true if ctrlr->is_disconnecting is true.
Change-Id: Ie2c74ba41f120662a30f6198751d07005d23abcf
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11000
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is a preparation to make nvme_transport_ctrlr_disconnect_qpair()
asynchronous.
For nvme_transport_ctrlr_disconnect_qpair(), factor out operations after
returning from transport's specific ctrlr_disconnect_qpair() into a helper
function nvme_transport_ctrlr_disconnect_qpair_done().
Then move nvme_transport_ctrlr_disconnect_qpair_done() into the end of
the transport specific ctrlr_disconnect_qpair().
Additionally remove the operation to overwrite the qpair state to
DISCONNECTED from nvme_transport_connect_qpair_fail() because
this is duplicated and nvme_transport_ctrlr_disconnect_qpair() is responsible
to make the qpair disconnected even after it completes asynchronously.
Change-Id: I9c8faa7039d306d3e31a8f51826755ce8840a8aa
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10851
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
For RDMA transport, adminq will find transport error first because
usually only adminq polls CM events.
Change-Id: I7b22cc8883bf02198f1a90d2654c1de6f2e736e6
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11331
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If qpair is disconnected asynchronously, it takes time from detecting
transport error to actually disconnected. We should avoid using the
path as soon as possible after detecting any transport error.
Poll group clears I/O path cache if it finds transport error and avoid
using the path which had transport error.
These changes will reduce the failover time.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I00580159a84372a115ed5e62a6ce13eed4368999
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11329
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
