Reserve space for used_cluster bitmap. The reserved space is calculated
according to the num_md_pages. The reserved space would be used when
the blobstore is extended in the future.
Add the num_md_pages_per_cluster_ratio parameter to the
bdev_lvol_create_lvstore API. Then calculate the num_md_pages
according to the num_md_pages_per_cluster_ratio and bdev total size, then
pass the num_md_pages to the blobstore.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: I61a28a3c931227e0fd3e1ef6b145fc18a3657751
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9517
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In SPDK, declarations have the return type on the same line. Definitions
have the return type on a separate line. Astyle has an option for
enforcing this. Unfortunately, it seems to have two bugs:
1) It doesn't work correctly at all on C++ files.
2) It often fails on functions that return enums, or long type names
Deal with 1) by adjusting the check_format.sh script to only tell astyle
to fix return type line breaks for C files and not C++. Deal with 2) by
adding a few typedefs to work around the problem.
Change-Id: Idf28281466cab8411ce252d5f02ab384166790c6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13437
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Calculation of the ANA log page size should use the
identify ctrl MNAN field
(maximum number of allowed namespaces)
not the NN (maximum valid nsid value).
An ANA-enabled controller must have a non-zero MNAN value,
see NVMe Base Specification, Figure 251,
therefore nvme_ctrlr_init_ana_log_page() may safely use MNAN.
Since NN might be much higher than MNAN,
ANA log size based on NN may results in a very large
log page and cause a failure to get ANA log,
e.g. if it is larger than the controller's MDTS.
Fix: replace cdata->nn with cdata->mnan
in nvme_ctrlr_init_ana_log_page()
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Change-Id: I2a522dca833a27dddad25848d7688efa23d23091
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13039
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Many open source projects have moved to using SPDX identifiers
to specify license information, reducing the amount of
boilerplate code in every source file. This patch replaces
the bulk of SPDK .c, .cpp and Makefiles with the BSD-3-Clause
identifier.
Almost all of these files share the exact same license text,
and this patch only modifies the files that contain the
most common license text. There can be slight variations
because the third clause contains company names - most say
"Intel Corporation", but there are instances for Nvidia,
Samsung, Eideticom and even "the copyright holder".
Used a bash script to automate replacement of the license text
with SPDX identifier which is checked into scripts/spdx.sh.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaa88ab5e92ea471691dc298cfe41ebfb5d169780
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12904
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: <qun.wan@intel.com>
There are a few places where a typo, extra character
or newline was added to the BSD 3-clause license text
which made it differ very slightly from the rest of
the license headers in the source tree. Remove those
differences in this patch, to help with automation of
SPDX identifier replacement in the next patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I542dc53cd252b1699253fd6dcc3ccac9643d7878
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12905
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
ext_io_opts uses the size member to allow backwards
compatibility however currently we only check if it is
below or equal the current size of the opts struct and
that it is not 0. size is only used when we copy opts
because of split or push/pull.
This patch introduces size checks to allow safe access
to e.g. metadata and memory domain pointers of the user
provided opts pointer. The minimum size of the struct
passed is now the size of the initial version of
spdk_bdev_ext_io_opts. To not introduce additional
checks when opts are consumed by a bdev module we
now always copy if the size is smaller than the
current opts struct size.
When introducing new members to opts additional
checks might be needed if those are directly accessed
through the passed pointer or bdev_io->internal.ext_opts.
Change-Id: Ibd181a5840a3d5022018a9f61403df961ffd6e1d
Signed-off-by: Jonas Pfefferle <pepperjo@japf.ch>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12550
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
During ctrlr reconnection, spdk_nvme_ctrlr_reconnect_poll_async()
is executed by a non-timed poller.
We should poll adminq more often during ctrlr disconnection too.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ib1f5b41015aed20deda8df6f2c837981ac233c04
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12615
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
As described in the NVMe specification, a controller level reset
includes the following actions:
- the controller stops processing any outstanding admin or I/O
commands;
- all I/O SQs and CQs are deleted.
In a full controller reset sequence for a PCIe controller, if we do
a controller level reset first, we can abort outstanding commands
after the hardware has actually been stopped.
For NVMe-oF controller, each I/O qpair is an independent network
connection and is disconnected safely. We do not want to change
NVMe-oF controller.
Fixes the issue #2360
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: If05febac74705bfd3df5abd15064c1203126e027
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12447
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
To fix issue: #2484
When unregistering the bdev, will send out the message
to each thread to abort all the IOs including IOs from
nomem_io queue, need_buf_small queue and need_buf_large queue.
The new SPDK_BDEV_STATUS_UNREGISTERING state is newly
added to indicate this unregister operation.
In this case, the bdev unregister operation becomes the
async operation as each thread will be sent the message
to abort the IOs and as the last step, it will unregister
the required bdev and associted io device.
On the other hand, the queued_resets will be handled
separately and not aborted in the bdev unregister.
New unit test cases are also added:
enomem_multi_bdev_unregister: to abort the IO from
nomem_io queue during the unregister operation
bdev_open_ext_unregister: to handle the events and
async operations from the unregister operation
Change-Id: Ib1663c0f71ffe87144869cb3a684e18eb956046b
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12573
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
By default, failback to the preferred I/O path is done automatically
if it is restored. Some users may want to keep using the backup I/O
path even if the preferred I/O path is restored. In this case,
bdev_nvme_set_preferred_path can be used to do manual failback.
We may be able to clear/fill I/O path cache more strictly but it will
be complicated and have bugs. This patch does the minimal change,
just skips an apparent case.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I78fe5faee6ff04e88ae3d7c6be6da1c20637c912
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12431
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The new blobstore ext API is used when the user
provides ext_io_opts in bdev layer.
To store blobstore ext_io_opts, vbdev_lvol reports
non-zero get_ctx_size in bdev module interface.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I64076b5369533be0c1d69ca48aef9d70a9abe488
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11373
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
The NVMe bdev module supported active-passive policy for multipath mode
first. By this patch, the NVMe bdev module supports active-active policy
for multipath node next. Following the Linux kernel native NVMe multipath,
the NVMe bdev module supports round robin algorithm for active-active
policy.
The multipath policy, active-passive or active-active, is managed per
nvme_bdev. The multipath policy is copied to all corresponding
nvme_bdev_channels.
Different from active-passive, active-active caches even non_optimized
path to provide load balance across multiple paths.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ie18b24db60d3da1ce2f83725b6cd3079f628f95b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12001
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
If we specify a preferred path manually for each NVMe bdev, we will
be able to realize a simple static load balancing and make the failover
more controllable in the multipath mode.
The idea is to move I/O path to the NVMe-oF controller to the head of
the list and then clear the I/O path cache for each NVMe bdev channel.
We can set the I/O path to the I/O path cache directly but it must be
conditional and make the code very complex. Hence, let find_io_path() do
that.
However, a NVMe bdev channel may be acquired after setting the preferred
path. To cover such case, sort the nvme_ns list of the NVMe bdev too.
This feature supports only multipath mode. The NVMe bdev module supports
failover mode too. However, to support the latter, the new RPC needs to
have trid as parameters and the code and the usage will be come very
complex. Add a note for such limitation.
To verify one by one exactly, add unit test.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ia51c74f530d6d7dc1f73d5b65f854967363e76b0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12262
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: <tanl12@chinatelecom.cn>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When sending a fused compare and write command, we pass a callback
bdev_nvme_comparev_and_writev_done that we expect to be called twice
before marking the io as completed. In order to detect if a call to
bdev_nvme_comparev_and_writev_done is the first or the second one, we
currently rely on the opcode in cdw0. However, cdw0 may be set to 0,
especially when aborting the command. This may cause use-after-free
issues and this may call the user callbacks twice instead of once.
Use a bit in the nvme_bdev_io instead to keep track of the number of
calls to bdev_nvme_comparev_and_writev_done.
Signed-off-by: Alex Michon <amichon@kalrayinc.com>
Change-Id: I0474329e87648e44b08998d0552b2a9dd5d34ac2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12180
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There is a race condition when a bdev is unregistered while reset is
submitted from the upper layer very frequently.
spdk_io_device_unregister() may fail because it is called while
spdk_for_each_channel() is processed.
spdk_io_device_unregister io_device bdev_Nvme0n1 (0x7f4be8053aa1)
has 1 for_each calls outstanding
To avoid this failure, defer calling spdk_io_device_unregister() until
reset completes if reset is in progress when unregistration is ready
to do, and then reset completion calls spdk_io_device_unregister()
later.
A bdev cannot be opened if it is already deleting. So we do not need
to hold mutex.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ida1681ba9f3096670ff62274b35bb3e4fd69398a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12222
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Previously, if a namespace is in ANA inaccessible state, I/O had been
queued infinitely. Fix this issue according to the NVMe spec.
Add a temporary poller anatt_timer and a flag ana_transition_timedout for
each nvme_ns.
Start anatt_timer if the nvme_ns enters ANA transition. If anatt_timer
is expired, set ana_transition_timedout to true. Cancel anatt_timer or
clear ana_transition_timedout if the nvme_ns exits ANA transition.
nvme_io_path_become_available() returns false if ana_transition_timedout
is true.
Add unit test case to verify these addition.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ic76933242046b3e8e553de88221b943ad097c91c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12194
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
there is no group
The real implementation handles this by returning -ENOENT, so do the
same in the test.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I405b6f60bf4dcdb22c57e48bbaf66d57522a49c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11508
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Count disconnecting a queue pair as activity so that the unit test
poll_threads() calls don't bail out until the disconnectedd_qpair_cb is
called at least once.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Idc437d6c589dbf133bfcbb5edba1087f928a718c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11507
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
This was neither set nor used.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I3119135843c5fc0b8724e593db40df46e6b5bdb0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12097
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The concat module can combine multiple underlying bdevs to a single
bdev. It is a special raid level. You can add a new bdev to the end of
the concat bdev, then the concat bdev size is increased, and it won't
change the layout of the exist data. This is the major difference
between concat and raid0. If you add a new underling device to raid0,
the whole data layout will be changed. So the concat bdev is extentable.
Change-Id: Ibbeeaf0606ff79b595320c597a5605ab9e4e13c4
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11070
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To execute a callback function for each registered bdev or unclaimed
bdev, add new public APIs, spdk_for_each_bdev() and
spdk_for_each_bdev_leaf().
These functions are safe for race conditions by opening before and
closing after executing the provided callback function.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I59b702ffec7b4fc5e9779de5a3a75d44922b829b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12088
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use spdk_bdev_readv/writev_block_ext even when
there is no ext opts passed by bdev layer
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I0b9f17150cdba1a1023478bae745ab4438ea99bb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10070
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
That is a preparation for support of memory domains
in bdev_raid
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I3a6e01eccd4d7e4bc197dc5ffe268d42081d41de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11429
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
memory domains
If bdev doesn't support any memory domain then allocate
internal bounce buffer, pull data for write operation before
IO submission, push data to memory domain once IO completes
for read operation.
Update test tool, add simple pull/push functions
implementation.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ie9b94463e6a818bcd606fbb898fb0d6e0b5d5027
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10069
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Replace spdk_bdev_get_by_name() + spdk_bdev_unregister() by
spdk_bdev_unregister_by_name() wherever possible.
This simplifies the code and makes the code more reliable.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I91388c9d0b2e244cb745720a480803b03c42a226
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12066
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To unregister a bdev more correctly, we had to call
spdk_bdev_open_ext(), spdk_bdev_desc_get_bdev(), spdk_bdev_unregister(),
and then spdk_bdev_close(). This was correct but complicated.
Hence add a new public API spdk_bdev_unregister_by_name() which does
the whole correct sequence of bdev unregistration.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I9068d4ac49dca944436e0ba587308fd356dfef75
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12065
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
With recent changes libreduce should provide correct buffers
if the driver doesn't support SGL in/out. This patch verifies
that we don't use SGLs when they are not supported.
Since even a single buffer can be split on 2MB page
boundary, it is not enough just to check iovs count.
Added asserts that the first elements of mbufs are
not null to avoid scan build errors
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I620e43bf5b1abd25cab412fe08346a6d767c9be9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11973
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
rte_pktmbuf_free frees the given mbuf and any chained mbufs.
It can cause double free of some mbuf if we free every mbuf
in a loop. Instead use rte_pktmbuf_free_bulk which correctly release
chained mbufs.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I55fd7832ff656f519a4ed2f02de8ef1a0f637a02
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11972
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
- Fixed duplication of key, key2, drv_name, cipher, etc., fields in
struct bdev_names and struct vbdev_crypto. Moved all of them into
the new struct vbdev_crypto_opts, which is re-used by both structs.
This aslo removes duplication in error handling and fininalization
logic that checks the keys are zeroed out and properly freed.
- Moved unhexlify into vbdev rpc code. All keys passed to vbdev
already in the binary form.
- Provide meaningful error messages in the rpc response on keys
validation issues during setup of crypto vbdev.
- Updated unit tests.
Signed-off-by: Yuriy Umanets <yumanets@nvidia.com>
Change-Id: I1fab8771bbbc0cd2f359f0d105fec28fb86893b3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11631
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
That is done to correctly handle metadata pointer which is part
of ext_opts structure. It will also be used by the next patch to
remove memory_domain pointer if request which uses local buffers
is split
Force the user to set correct ext_opts size, update API functions
description.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I77517d70df34a998d718cc6474fb4c538a42918f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11349
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Bdev modules must not access internal bdev_io
structure, so add a new pointer in a public
section. Pointer in internal section will be
used in next patch
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ib631563015b3e5fa9300d22b7ae59d8db43c8275
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10421
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is a preparation for enabling of memory domains
pull/psuh functionality. Since memory domains API is
asynchronous, this patch makes asynchronous operations
with bounce buffers.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ieb1f2a0c151149af58cfd7607dbde4c76c3c288d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10420
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
For RDMA transport, adminq will find transport error first because
usually only adminq polls CM events.
Change-Id: I7b22cc8883bf02198f1a90d2654c1de6f2e736e6
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11331
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If qpair is disconnected asynchronously, it takes time from detecting
transport error to actually disconnected. We should avoid using the
path as soon as possible after detecting any transport error.
Poll group clears I/O path cache if it finds transport error and avoid
using the path which had transport error.
These changes will reduce the failover time.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I00580159a84372a115ed5e62a6ce13eed4368999
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11329
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_nvme_ctrlr_disconnect() will be made asynchronous in the
following patches and so we will need to have some changes.
spdk_nvme_ctrlr_disconnect() disconnects adminq and ctrlr synchronously
now.
If spdk_nvme_ctrlr_disconnect() is made asynchronous,
spdk_nvme_ctrlr_process_admin_completions() will complete to disconnect
adminq and ctrlr, and will return -ENXIO only if adminq is disconnected.
However even now spdk_nvme_ctrlr_process_admin_completions() returns
-ENXIO if adminq is disconnected.
So as a preparation, set a callback before calling spdk_nvme_ctrlr_disconnect()
and call the callback if it is set and spdk_nvme_ctrlr_process_admin_completions()
returns -ENXIO.
Besides, fix the return value of bdev_nvme_poll_adminq() in this patch.
Change-Id: I2559f86bb8cf9a92b5b386ed816c00b08c9832df
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10950
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
As we do when deleting ctrlr_channel, disconnect and then free I/O
qpair in a ctrlr reset sequence.
Deleting ctrlr_channel and resetting ctrlr_channel may cause conflicts.
This patch processes such conflicts correctly.
If destroy_ctrlr_channel_cb() is executed between pending and executing
reset_destroy_qpair(), reset_destroy_qpair() is not executed because
ctrlr_channel is not found. In this case, destroy_qpair_channel()
starts disconnecting qpair and deletes ctrlr_channel. Then
disconnected_qpair_cb() releases a reference to poll group.
If destroy_ctrlr_channel_cb() is excuted between executing reset_destroy_qpair()
and disconnected_qpair_cb(), destroy_ctrlr_channel_cb() skips
ctrlr_channel for a reset sequence.
Change-Id: I1f49f74b94aefbea178680aa53ded3a12876c676
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10766
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
At the moment MLX5 uses different number of qp descriptors than the
other pmd crypto drivers. Adding it to vbdev_crypto on init and re-use
everywhere we need it.
Signed-off-by: Yuriy Umanets <yumanets@nvidia.com>
Change-Id: Iea4d4787fc5fd91f27c4a70cf78c5660f09bc854
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11878
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Since IV length is the same for all pmd crypto drivers,
AES_CBC_IV_LENGTH is renamed to IV_LENGTH.
Signed-off-by: Yuriy Umanets <yumanets@nvidia.com>
Change-Id: If8769db119eb599a17c267e8950f18f5a0ea995b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11875
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
spdk_nvme_poll_group has followed spdk_nvme_qpair about how to
process I/O qpair deletion inside of a completion context.
spdk_nvme_qpair_process_completions() accesses qpair after
returning from nvme_transport_qpair_process_completions().
So this is reasonable.
On the other hand, if spdk_nvme_poll_group_process_completions()
can execute spdk_nvme_ctrlr_free_io_qpair() inside of a completion
context, the target qpair is ensured to be deleted after returning
from spdk_nvme_ctrlr_free_io_qpair(). Then the target qpair is
not accessed anymore in spdk_nvme_poll_group_process_completions().
Remove two variables, in_completion_context and num_qpairs_to_delete,
of spdk_nvme_transport_poll_group and the related code.
This change is really necessary to support the following case.
In the NVMe bdev module, a nvme_qpair has a qpair and a poll_group
channel. disconnected_qpair_cb calls spdk_nvme_ctrlr_free_io_qpair()
for the qpair and spdk_put_io_channel() to the poll_group_channel.
spdk_nvme_ctrlr_free_io_qpair() is executed after unwinding stack
but spdk_put_io_channel() is executed now. The callback to
spdk_put_io_channel() calls spdk_nvme_poll_group_destroy(). However,
spdk_nvme_ctrlr_free_io_qpair() is not executed. Hence
spdk_nvme_poll_group_destroy() fails.
Update the corresponding stub in unit test together.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Icd1f1daf049c6c7ffb28790fe87989a1060f8952
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11496
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is another preparation to disconnect qpair asynchronously.
Add nvme_qpair object and move the qpair and poll_group pointers and
the io_path_list list from nvme_ctrlr_channel to nvme_qpair. nvme_qpair
is allocated dynamically when creating nvme_ctrlr_channel, and
nvme_ctrlr_channel points to nvme_qpair.
We want to keep the times of references at I/O path. Change nvme_io_path
to point nvme_qpair instead of nvme_ctrlr_channel, and add
nvme_ctrlr_channel pointer to nvme_qpair.
nvme_ctrlr_channel may be freed earlier than nvme_qpair. nvme_poll_group
lists nvme_qpair instead of nvme_ctrlr_channel and nvme_qpair has a
pointer to nvme_ctrlr.
By using the nvme_ctrlr pointer of the nvme_qpair, a helper function
nvme_ctrlr_channel_get_ctrlr() is not necessary any more. Remove it.
Change-Id: Ib3f579d3441f31b9db7d3844ec56c49e2bb53a5d
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11832
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In the following patches, spdk_nvme_ctrlr_disconnect_io_qpair() will
be changed to be asynchronous, spdk_nvme_ctrlr_disconnect_io_qpair()
will be called first and then spdk_nvme_ctrlr_free_io_qpair() after
the qpair is actually disconnected.
We will not be able to keep the current bdev_nvme_destroy_qpair()
function.
As a preparation, inline bdev_nvme_destroy_qpair() and remove it.
Additionally, this patch has the following changes.
Previously I/O qpair was freed and then I/O path caches were cleared.
Both are SPDK thread local. So there is no dependency for the ordering
of these two operations. However, it will reduce the size of the
following patches if we clear I/O path caches before freeing I/O qpair
when the qpair is disconnected. Hence we clear I/O path caches and then
free I/O qpair.
Remove DTRACE for bdev_nvme_destroy_qpair() for now.
It will be restored in the following patches.
Furthermore, fix potential NULL pointer acces in
bdev_nvme_create_qpair().
Change-Id: I0ab78ccb0d240e56b95b53179341afcd909a31f6
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10746
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The following patches will enable us to specify I/O error resiliency
options per nvme_ctrlr as global options. To do it easier, move
per controller options about I/O error resiliency into struct nvme_ctrlr_opts.
prchk_flags is not exactly for resiliency but move it into struct
nvme_ctrlr_opts too.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I85fd1738bb6e293cd804b086ade82274485f213d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11829
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If 0 - UINT32_MAX or UINT32_MAX - 0 is substituted into a int variable,
we cannot get any expected result.
Fix the bug and add unit test case to verify the fix.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ib045273238753e16755328805b38569909c8b83a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11836
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
- Continue init of the other crypto devices (mlx5) after failure of
rte_vdev_init(AESNI_MB) in vbdev_crypto_init_crypto_drivers(). It
simply may not be enabled in DPDK because it requires IPSec_MB>=1.0
installed in the system. Reproduces with --with-dpdk=dpdk/install
option used, when the target DPDK is built without control of IPSec
version from the SPDK side.
- Updated crypto_ut to test the new behavior of error handling from
rte_vdev_init(AESNI_MB) in vbdev_crypto_init_crypto_drivers().
Signed-off-by: Yuriy Umanets <yumanets@nvidia.com>
Change-Id: Icd4db8877afe87db8166c40d6e7b414cd43c9c25
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11624
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
- Switched to using rte_mempool for mbufs instead of spdk_mempool. This
allows using rte pkt_mbuf API that properly handles mbuf fields we need
for mlx5 and we don't have to do it manually when sending crypto ops.
- Using rte_mempool *g_mbuf_mp in vbdev crypto ut and added the mocking
API code.
- crypto_ut update to follow pkt_mbuf API rules.
Signed-off-by: Yuriy Umanets <yumanets@nvidia.com>
Change-Id: Ia5576c672ac2eebb260bfdbb528ddb9edcd8f036
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11623
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
In many cases, addressing bdevs by their UUIDs is often easier than
using their names, which can be somewhat arbitrary. For instance, the
NVMe bdev builds a name by addng the n{NSID} suffix to the controller's
name, while the UUID is filled with NGUID (if available).
The UUID alias is stored in the form defined by RFC 4122, meaning five
groups of lower-case hexadecimal characters. It's important to note
that bdev layer uses case-sensitive name comparison, so the user needs
to use the same textual UUID representation.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I8b112fb81f29e952459d5f81d97fdc7a591730f8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11395
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
bdev_multi_allocation tries to write four characters, an integer between
0 and INT_MAX, and a nul byte into 10 characters. That requires at least
15 characters.
This leads to build failures with "make CONFIG_DEBUG=n CONFIG_UBSAN=y".
Change-Id: I8cb9fd4ede31ae24809e4a04fd60a67dae3a0ac4
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11261
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
While not documented as such, spdk_bdev_module_claim_bdev() has always
allowed a bdev that is opened read-only to remain read-only when
claimed. This occurs when NULL is passed in place of an spdk_bdev_desc.
This change updates the function's documentation to match the
implementation and adds a unit test to ensure the current behavior
remains.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Ief26de60e4408bfe1aa60b7a4e1d8adf273470b6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11267
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This patch aligns namespace comparison with Linux kernel
implementation:
- UUID is optional and may be NULL
- command set (CSI) should be the same
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I8f889989f24cd51b104057217f87eb303b30fa68
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11312
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is the same effort as the last patch.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I94ef08abdbb2bd2e07d0cd1e552c5d05c805233e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10817
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
More precise stubs for spdk_nvme_poll_group are critically important
to verify upcoming changes.
Add a flag is_failed to struct spdk_nvme_qpair separately from
is_connected. This is used to inject error to a connection.
Replace a single list qpairs by two lists, connected_qpairs and
disconnected_qpairs for struct spdk_nvme_poll_group.
Then utilize these to manage qpair in poll group.
spdk_nvme_ctrlr_reconnect_io_qpair() is not used in the NVMe bdev
module now. Remove the corresponding stub.
Adjust polling count accordingly.
Change-Id: I4d867c56ae518276813f6f96d23a5f6933364fd4
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10816
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If ctrlr_loss_timeout_sec is set to -1, reconnect is tried repeatedly
indefinitely, and I/Os continue to be queued.
This patch adds another option fast_io_fail_timeout_sec, a flag
fast_io_fail_timedout to nvme_ctrlr.
If the time fast_io_fail_timeout_sec passed after starting reset,
set fast_io_fail_timedout to true not to use the path for I/O submission.
fast_io_fail_timeout_sec is initialized to zero as same as
ctrlr_loss_timeout_sec and reconnect_delay_sec.
The name of the parameter follows the famous DM-multipath, its fast_io_fail_tmo.
Change-Id: Ib870cf8e2fd29300c47f1df69617776f4e67bd8c
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10301
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously reconnect retry was not controlled and was repeated indefinitely.
This patch adds two options, ctrlr_loss_timeout_sec and reconnect_delay_sec,
to nvme_ctrlr and add reset_start_tsc, reconnect_is_delayed, and
reconnect_delay_timer to nvme_ctrlr to control reconnect retry.
Both of ctrlr_loss_timeout_sec and reconnect_delay_sec are initialized to
zero. This means reconnect is not throttled as we did before this patch.
A few more changes are added.
Change nvme_io_path_is_failed() to return false if reset is throttled
even if nvme_ctrlr is reseting or is to be reconnected.
spdk_nvme_ctrlr_reconnect_poll_async() may continue returning -EAGAIN
infinitely. To check out such exceptional case, use ctrlr_loss_timeout_sec.
Not only ctrlr reset but also non-multipath ctrlr failover is controlled.
So we need to include path failover into ctrlr reconnect.
When the active path is removed and switched to one of the alternative paths,
if ctrlr reconnect is scheduled, connecting to the alternative path is left
to the scheduled reconnect.
If reset or reconnect ctrlr is failed and the retry is scheduled,
switch the active path to one of alternative paths.
Restore unit test cases removed in the previous patches.
Change-Id: Idec636c4eced39eb47ff4ef6fde72d6fd9fe4f85
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10128
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
We noticed the difference between the SPDK 21.10 and the latest master
in a test.
The simplified scenario is as follows:
1. Start SPDK NVMe-oF target
2. Run bdevperf for the target with -f parameter to suppress exit
on failure.
3. Kill the target after I/O started.
With the SPDK 21.10, bdevperf retries failed I/Os and exits after
the test time is over.
With the latest SPDK master, bdevperf hungs and does not exit even
after the test time is over.
The cause was as follows:
reset ctrlr is repeated very quickly (once per 10ms by default) and hence
I/Os were queued infinitely because nvme_io_path_is_failed() returned
false if nvme_ctrlr is resetting.
We should queue I/O when nvme_ctrlr is resetting only if reset is throttoled
and fail-fast for the repeated failures is supported.
Hence in this patch, fix the degradation and remove the related unit
test cases.
Reported-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I4047d42dc44488a05264c6a841d101a7c371358b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11062
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We sort secondary trids to avoid using disconnected trids for failover.
However the sort had a bug.
This bug was found by running test/nvmf/host/multipath.sh in a loop.
Verify the fix by adding unit test.
Fixes#2300
Signed-off-by: Shuhei Matsumoto <shuheimatsumoto@gmail.com>
Change-Id: I22b0ede4d2ef98b786c3e0d1f5337a2d568ba56d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10921
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch adds the framework for a discovery
service in the bdev/nvme module.
Users can specify an IP/port of a discovery service.
The bdev/nvme module will connect to a discovery
controller, get the discovery log page, and then
register for AERs. It will connect to each
subsystem specified in the initial log page.
AER completions will trigger fetching the log
page again, at which point new subsystems will
be connected to, or removed subsystems will be
detached.
This patch does the following:
* Adds the new start_discovery RPC
* Connects to the discovery controller
* Gets the discovery log page
* Registers for AERs
* Detach from discovery controllers at shutdown
Subsequent patches in this series will:
* Connect to subsystems listed in discovery log page
* Detach from subsystems that were listed in earlier
discovery log pages but subsequently removed
* Add a stop_discovery RPC
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I54bfa896a48c5619676f156b5ea9f2d1f886c72f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10694
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
The failover_in_progress flag is used to decide the return value of
bdev_nvme_failover().
bdev_nvme_delete() calls bdev_nvme_failover() with remove=true to remove
nvme_ctrlr->active_path_id. However bdev_nvme_failover() returns zero
if nvme_ctrlr->failover_in_progress is true. bdev_nvme_failover() may
return zero even if it does not remove nvme_ctrlr->active_path_id.
The following will be better.
bdev_nvme_failover() returns -EBUSY if nvme_ctrlr->resetting is true,
and the caller repeats calling bdev_nvme_failover() until the target trid
becomes alternative path or bdev_nvme_failover() returns zero.
To do that, the failover_in_progress flag is not necessary any more.
Removing the failover_in_progress will also simplify the following
patches to unify ctrlr reset and failover.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I57ab944beb1d06ea4def144c81c69705860de35f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10441
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We had not checked the bit 0 of the Namespace Multipath I/O and
Namespace Sharing Capabilities (NMIC) field in the Identify Namespace
data structure.
If the bit 0 of the NMIC is zero, it is likely that namespaces are not
identical.
We should check if the value of the NMIC first, and do it in this patch.
Additionally, it is not usual if the bit 0 of the CMIC and the bit 0 of
the NMIC do not match. So in unit tests rename the parameter multi_ctrlr
by multipath for ut_attach_ctrlr() and use it for the value of the NMIC.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6aa7cbcc99be2507dbf18930f7b585a9ea7d0f90
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10380
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Replace the spdk_nvme_ctrlr_reset_async() and spdk_nvme_reset_poll_async()
calls by the spdk_nvme_ctrlr_disconnect(), spdk_nvme_ctrlr_reconnect_async(),
and spdk_nvme_ctrlr_reconnect_poll_async() calls in a reset ctrlr
sequence.
spdk_nvme_ctrlr_disconnect() can fail if ctrlr is already resetting or
removed. But both cases are not possible. reset is controlled and the callback
to the hot remove is called when the ctrlr is hot removed. So we assume
spdk_nvme_ctrlr_disconnect() always succeed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1299e198597b2a2110f80b9a868e2dae015682ee
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10092
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The originally detected problem is that SPDK NVMf target fails command
with invalid opcode with status code INTERNAL_DEVICE_ERROR instead of
INVALID_OPCODE. All unknown commands on IO queue are passed to
underlying block device layer as NVME_IO type. It is not checked if
this type of commands is supported and, when command fails,
INTERNAL_DEVICE_ERROR is set as status code. If command fails on
submission, status code is set to INVALID_OPCODE which is more
relevant.
This patch adds check if command type is supported to
bdev_nvme_*_passthru functions. If not supported, it is failed with
ENOTSUP.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I4d7f7639da17dd3b1dc3eee7eb1b4a4f876117a2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8567
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
In the following patches, we want to retry reconnect if reconnect failed
in a reset ctrlr sequence but we want to delay the retry. While
we wait the delayed retry, we want to quiesce ctrlr completely.
As part of quiesce ctrlr operations, we want to pause adminq poller but
we need to do it on the nvme_ctrlr->thread.
If a reset ctrlr sequence runs on the nvme_ctrlr->thread, we can avoid
redirecting the pending destruct request at completion too.
So we redirect the reset ctrlr sequence into the nvme_ctrlr->thread.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I538b962e2a7b5cf00ebbac2a1e888482ddeeee61
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10075
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
In the following patches, bdev_nvme_reset() will execute the reset ctrlr
operation on the nvme_ctrlr->thread until completion as bdev_nvme_admin_passthru()
does. Hence change the callback bdev_nvme_reset_io_continue() to
redirect to the orig_thread by using bio. Furthermore, use bio->cpl.cdw0
to store the completion status of the reset processing. bdev_nvme_reset()
does not use bio->cpl.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I361cc44494190ba83ad6e360788d78851416c46c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10074
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch supports admin passthrough retry when we get any error
with DNR=0 but ABORTED_BY_REQUEST up to retry_count times.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1bf29570791fdbe8651fa70c4c8685bb740fb86b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9944
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When resetting ctrlr, adminq is disconnected first. If adminq is disconnected,
admin passthrough request is rejected with -ENXIO.
But resetting ctrlr may succeed. If resetting ctrlr succeeds, adminq is
connected again, and admin passthrough request will be
submitted successfully.
On the other hand, if ctrlr is failed, admin passthrough request is
rejected with -ENXIO. But when resetting ctrlr, ctrlr is set to unfailed.
Hence bdev_nvme_admin_passthru() skips any ctrlr which is resetting
or failed, and calls bdev_nvme_admin_passthru_complete() with -ENXIO
if no available ctrlr is found.
bdev_nvme_admin_passthru_complete() queues admin passthrough request
and retry it one second later if ctrlr is resetting.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic748dc4faf29ebf717ae5c29dcf7c55fe2ea9243
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9942
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The NVMe bdev module queues retried I/Os itself now.
bdev_nvme_abort() needs to check and abort the target I/O if it
is queued for retry.
This change will cover admin passthrough requests too because they
will be queued on the same thread as their callers and the public
API spdk_bdev_reset() requires to be submitted on the same thread
as the target I/O or admin passthrough requests.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If37e8188bd3875805cef436437439220698124b9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9913
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
After multipath feature is supported, one bdev will have more than one
nvme ctrlr. Fore ease of view, display each ctrlr's trid info.
Moreover, rename nvme_bdev_ctrlr_get as nvme_bdev_ctrlr_get_by_name here
to keep consistent with nvme_ctrlr_get_by_name.
Signed-off-by: Kai Li <lik271@chinatelecom.cn>
Change-Id: I417506699bbea6ed13dac0fee942749757d2ae47
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10129
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In the bdev-zone API, there are a few functions that takes a zone_id:
spdk_bdev_get_zone_info(), spdk_bdev_zone_management(), and the
spdk_bdev_zone_append() functions.
The way a zoned application is usually written is that it starts off
by getting the zone report for all zones (zone_id will be sent in as 0),
and then the application will keep the whole zone report in memory.
Therefore, an application usually have access to the zone_id/zslba for
all zones. However, there are cases, e.g. when getting an error on write,
where the completion callback will only have the lba of the write that
failed.
Add a helper function that can be used to get the zone_id/slba for a
given lba. Having this helper in bdev-zone will avoid SPDK applications
needing to provide their own implementation for this.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I978335f87f7d49bc33aed81afcaa6d9f0af8a1e4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10180
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
verify_io() keeps track of a buf pointer, but the
buf pointer never actually gets used. So remove
this buf pointer.
Found by clang-13.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I79dfeac7f004b56f7d4404f41b2ff18b96968a20
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10056
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
If I/O got ANA error, ANA state may be out of date. So in this case
read ANA log page and update ANA states. Mark nvme_ns to be updating
to avoid using while updating ANA state.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia43d38b3a589c84d6d0479dedcced033e76fb194
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9458
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
If an I/O failed by ANA error, the corresponding ANA state might be
out of date. In the following patches, for this case, read the latest
ANA log page and update the ANA state. Such reading ANA log page may be
done on multiple threads concurrently including AER ANA change.
Hence protect ANA log page by adding an new flag ana_log_page_updating
to struct nvme_ctrlr and using it.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8bb84091d50a5fdc0d9893b585be972dfd31c0f1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9526
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add bdev_retry_count to spdk_bdev_nvme_opts and retry_count to
nvme_bdev_io, respectively.
Set type of both to int because we want use -1 for infinite retry.
Set the default value of bdev_retry_count to zero for the backward
compatibility.
bdev_retry_count is configurable by the RPC bdev_nvme_set_options.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9bc746fcea54aa8722c76f79c70c2ae2b375aa53
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9864
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The previous patch supported I/O retry when no available io_path
was found at submission.
This patch supports I/O retry when we get I/O path error at completion.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I93a1664944b15ab0a826a321e2ea7a2574263afe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9850
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
If ANA state is inaccessible or qpair is disconnected, I/O cannot
be submitted.
But if qpair is connected, ANA state may become accessible, or if
qpair is disconnected, it may become connected via resetting.
Hence even if find_io_path() returned NULL, queue I/O and retry it
one second later if qpair is connected or ctrlr is resetting.
Sort retried I/Os by expiration values in ticks, and activate a timed
poller per nvme_bdev_channel only if there is any retried I/O. So
the poller function bdev_nvme_retry_ios() always returns BUSY because
if the poller runs earlier than the closest retried I/O or runs when
there is no retried I/O, it is more like a bug of the framework.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id28110a0d63ebc1c5772814e2ff8a47934df1644
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9830
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
If NN is very large this saves a lot of memory. This lookup is
not generally used in the I/O path anyway.
Change-Id: I98e190006843ad5d0bac8483bf9feb800d4a665a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9884
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
In the SPDK NVMe driver, spdk_nvme_ctrlr_reset_async() sets
ctrlr->is_failed to false and spdk_nvme_ctrlr_reset_poll_async() sets
ctrlr->is_failed to true if it fails.
On the other hand, in the unit test for the NVMe bdev module,
the stub for spdk_nvme_ctrlr_reset_async() does nothing and
the stub for spdk_nvme_ctrlr_reset_poll_async() sets ctrlr->is_failed
to false if it succeeds.
This bug made us very difficult to write unit test for I/O retry.
Hence fix this bug.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic0dcf1109ce543a53fca74708fc86c8c74a17692
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9829
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
bdev_nvme_find_io_path() selects an io_path whose qpair is connected
and ANA state is optimized or non-optimized.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I79c978795562b606ee27aa43020684d8bcbf50c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9405
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reset all controllers of a bdev controller sequentially. When resetting
a controller is completed, check if there is next controller, and
start resetting the controller.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I169a84b931c6b03b36bb971d73d5a05caabf8e65
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7274
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Previously the NVMe bdev module had completed the outstanding reset and
then canceled pending resets. This was complex.
On the other hand, the generic bdev layer cancels pending resets
and then completes the outstanding reset.
Following the generic bdev layer simplifies the code and makes us easier
to control retry reset, delay retry reset by a few seconds, or stop retry
after repeated failures and then delete ctrlr.
Update unit tests accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9a68422918ebcb052b3a281316ffba9b3450ecd4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9816
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
bdev_nvme_admin_passthru() chooses the first ctrlr which is not failed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If41a1d1e1bde4bddfa92e5a385509daa3f0ce4de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9525
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We have io_path structure now and returning io_path rather than
ns and qpair match the function name. The following patches will
cache the returned io_path into nvme_bdev_io.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5d773da18591fc324667f6b5c489a38f497bf3d8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9295
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch removes the critical limitation that ctrlrs which are
aggregated need to have no namespace. After this patch, we can
add multiple namespaces into a single nvme_bdev.
The conditions that such namespaces satisfy are,
- they are in the same NVM subsystem,
- they are in different ctrlrs,
- they are identical.
Additionally, if we add one or more namespaces to an existing
nvme_bdev and there are active nvme_bdev_channels, the corresponding
I/O paths are added to these nvme_bdev_channels.
Even after this patch, ANA state is not utilized in I/O paths yet.
It will be done in the following patches.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I15db35451e640d4beb99b138a4762243bee0d0f4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8131
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Specifying only a transport id is not enough. We need to be able to
describe the host parameters too.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Iadbea553aee4b38e7cacab0b486e7e5746d0d1ab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9825
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is the currently active path identifier in a failover scenario. The
path is defined by more than just the transport identifier, so fix the
name.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I682c6f4c54f75307e2615bf80e70358180d99fe2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9576
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This defines a unique path between a host and a target.
Change-Id: Ia3d24c1b34199a8b596aaf17900ca9694a9da77d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9505
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Call rte_cryptodev_close() to free qpair memory instead of using
an internal function.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I1bd7f0dd86de83f278f6be3263cdf3fbd8e1c77f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9720
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch replaces the synchronous `spdk_nvme_detach()` calls with its
asynchronous counterparts in the controller unregister path.
An additional poller is introduced to periodically poll the NVMe driver
for detach completion. Once the detach is completed, the poller is
unregistered and the nvme_ctrlr is destroyed. The poller uses the same
period (1ms) as the async probe poller.
Since reset and detach cannot happen at the same time, reset_poller was
renamed to reset_detach_poller and it can now store the pointer either
to the reset or detach poller, depending on the circumstances.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I5eb2dd6383d98d25d1f9748af08c1a13d18acb0e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8729
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
It can match by any provided parameter to remove paths.
Change-Id: I5e7a87342bbb90943dc97fb52f142814fcf0acfa
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9453
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Instead of storing an spdk_nvme_transport_id, store the object that
contains it. This will make a few later patches easier.
Change-Id: I36b74889fe39af3b7ab2b900fb3ea4b3f39e1f83
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9484
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Allow to return more than one memory domain.
This change aligns bdev and nvme API and provides
more flexibility for custom transports.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ica9b12ad8463c361be6cb62ee2c0513eec0b486d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9546
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch enables us to aggrete multiple ctrlrs in the same NVM
subsystem into a single bdev ctrlr to create multipath.
This patch has a critical limitation that ctrlrs which are aggregated
need to have no namespace. Hence any nvme bdev is not created.
However it will be removed in the next patch.
The design is as follows.
A nvme_bdev_ctrlr is created to aggregate multiple nvme_ctrlrs in
the same NVM subsystem. The name of the nvme_ctrlr is changed to be
the name of the nvme_bdev_ctrlr.
NVMe bdev module has both the failover feature and the multipath
feature now. To choose which of failover or multipath to use, add an new
parameter multipath to the RPC bdev_nvme_attach_controller.
When we attach a new trid to the existing nvme_bdev_ctrlr, we use the failover
feature if multipath is false, we use the multipath feature if multipath is
false.
nvme_bdev_ctrlr has a list for nvme_ctrlr and it is guarded by the
global mutex. Callers can query nvme_ctrlrs from a nvme_bdev_ctrlr via
trid as a key. nvme_bdev_ctrlr is not registered as io_device.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I20571bf89a65d53a00fb77236ad1b193e88b8153
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8119
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Previously, if an I/O qpair is disconnected, we tried reconnecting
the qpair. However, this reconnect operation was very likely to fail
and will not match the upcoming asynchronous connect/reconnect
operation. We need an extra callback to make this reconnect operation
asynchronous, but we do not want to have it.
Hence if an I/O qpair is disconnected, we free the I/O qpair and then
reset the corresponding nvme_ctrlr immediately. If the admin qpair is
also disconnected, the nvme_ctrlr is reset immediately. However this
event may never happen. So we do not wait for the error of the admin
qpair.
The NVMf host may disconnect connections by itself intentionally.
In this case, resetting the nvme_ctrlr will surely fail. But resetting
the nvme_ctrlr frees all I/O qpairs of the nvme_ctrlr and these I/O
qpairs are not created again until resetting the nvme_ctrlr succeeds.
Resetting the nvme_ctrlr once at most is more efficient than repeating
reconnecting the I/O qpair. So this change is valuable even for such
intentional disconnection. However, it is helpful to know the event that
I/O qpair is disconnected. Hence change DEBUGLOG to NOTICELOG in the
disconnected callback. The disconnected callback is not repeated, and
we do not need to worry about NOTICELOG flooding.
Refine the unit test case to verify this change.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I376b749c2f55d010692bf916370e8bb4249b795f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9515
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
