If a spdk_bdev_io cannot be completed, because it is sent to a zone that
is currently busy, reschedule its submission. This mechanism will be
used by appends, as mutliple append commands can be directed to the same
zone at the same time.
Change-Id: I60da2bd1835380812d22536ea275fb8fed9f8561
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477437
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Update write pointers during successful write / reset completion. This
is needed in order to support the append operation.
This patch also introduces the zone busy flag, which makes sure only one
write (or reset) operation can be active at a time. If a request is
directed to a zone that is already processing another operation, it will
be completed with a failed status.
Change-Id: I085438431577e4f0cd2d5d9eff7a220090f21176
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469119
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Move bdev_ocssd_get_zone_by_slba up in the file. This function is going
to be used by many others, so it makes sense to be defined near the top.
Change-Id: I7db438bac032966430b9ca6a56e977f7c7c3fe43
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477298
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds support for saving JSON configuration of the OCSSD
bdev module required to recreate the current state.
Change-Id: Iedbdb8b4a2b7dd02a223ce6f073553e71b9c040a
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469090
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Added per-namespace config_json callbacks, so that each namespace can
dump its own configuration. This is a nop for regular NVMe namespaces,
but it will be used by Open Channel ones to save their bdev configuration.
The callbacks are executed after controller configuration has been
saved. This ensures that when a config is loaded, any namespace related
RPC calls (e.g. creating bdevs) are run after associated controller has
already been attached.
Change-Id: Ia18e15b46f10b058c1b6a9b74edb386e1b4874de
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477436
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Currently, the controllers managed by bdev_ftl are skipped in
bdev_nvme's config_json output by verifying if they support Open
Channel. Since new bdev_ocssd also uses Open Channel controllers and
it relies on bdev_nvme's config_json, additional flag was added to mark
that a controller is used by bdev_ftl.
This is a temporary solution that should be removed once bdev_ftl
becomes a virtual bdev and starts using bdevs instead of NVMe
controllers.
Change-Id: Ib25b61a72f0912d7a51119357f5c221941af50ad
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477297
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
OCSSD bdev needs to keep track of some portion of zone's state (write
pointer, its capacity, whether it's busy) in order to support the append
operation. To achieve that, all the info needs to be retrieved for all
of the chunks and translated to zone format.
Change-Id: Id88282576aba337b50e7c7e1b9e9ff5aba25a3db
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468937
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added zone information command translating Open Channel's chunk
information to spdk_bdev_zone_info structure.
Change-Id: Ifdb15f2e0ea2fb8422810fa64f18942fcb6e4582
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468213
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Wrap the part of the bdev_ocssd_io responsible for describing IO
operations in a separate structure. Currently all fields are wrapped
this way, but it'll allow the bdev_ocssd_io to become a union of several
different types of structures (one for the IO operations, one for
getting zone information, etc.).
Change-Id: I72276ce786d3c9ef0d1762c5ac20071b7a163ef5
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477023
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added zone reset command. It's very similar to a regular data set
management deallocate command with the only difference being that it
operates on zones instead of blocks.
Change-Id: Iae4d77c6877b6906231336b13fad1167de149f20
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467920
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
'delay_pcie_doorbel' parameter in 'spdk_nvme_io_qpair_opts' structure
was renamed to 'delay_cmd_submit' to make it suitable for every
transport. Old name is also kept for backward compatibility.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I09ef8028133c4a3d4a5bbc5329ced1f065bcaa46
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475305
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This patch removes posibility to set cuse device path. Instead
"/dev/spdk/nvme*" path is used.
Change-Id: I7c3087772a3661eebe03fce21356c35cc8204b49
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/474598
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The patch adds zone address to Open Channel LBA translation as well as
initial support for read and write commands. Each IO command is
currently limited to a single zone (chunk).
Change-Id: I3ee6d58323871f0651ac1d5e8dda28eb6d687a95
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467149
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Other NVMe bdev modules (e.g. OCSSD) need the definition of the
nvme_io_channel to be able to send IO requests, so this structure has to
be defined in the common header.
Change-Id: I550d15d091078588c6c7ab824d883e049ec5a72c
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470019
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Added a way to create and delete OCSSD bdevs on top of OC NVMe
controller. The controller can be created using the regular NVMe bdev
RPC call. For instance, the following (assuming 0000:00:04.0 is an
OC device):
rpc.py bdev_nvme_attach_controller -b nvme0 -a 0000:00:04.0 -t pcie
rpc.py bdev_ocssd_create -c nvme0 -b nvme0n1
creates Open Channel controller nvme0 and OCSSD bdev nvme0n1 on top of
it. The bdevs can be deleted either by the bdev_ocssd_delete call or by
deleting whole NVMe controller, in which case all bdevs are destroyed.
Change-Id: I9f2f02103fc5570a53bd26479c8690be206829c3
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468984
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch adds initial Open Channel zoned bdev implementation. The
bdev will allow to use the zoned API on top of OCSSD devices.
Added the ability to create the OCSSD NVMe controller. The controller
is created using the regular NVMe's RPC when the controller is detected
to be Open Channel.
Change-Id: I31d271126dba4369ac2eaebd4cc7bdd460e5f808
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467147
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This was previously named "active" as in "active
namespace". But we're really using this flag to keep
track of whether the namespace structure is currently
populated with data structures, bdevs, etc. for the
associated namespace. If we find an active namespace
on an SSD that is not populated with bdevs in the
bdev/nvme module, then we need to populate it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie66a5ffbcb52dd0e8f8e67a14f66f19d325d91bd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475933
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This gives per-type ns handlers a way to associate
the generic nvme_bdev_ns structure to any type-specific
context.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id632b41bc3ad842c8ec5e836436bd081e8cad496
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475926
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This function can now be easily moved inline to
its single caller.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I55a20dfb9f6cdeee2541b02b63fd5422786c551c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475925
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Some namespace types such as OCSSD need to do some additional
operations before being ready to populate bdevs for a namespace.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I67a56f1238e70b8d6fa8c4452fec7df3b7fddb03
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475924
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is in preparation for making this code path
asynchronous. For now we will just call this function
immediately after calling the per-ns-type populate
namespace function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6e397901b2489287634b1d21e57f92e0abcf48e0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475923
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is in preparation for making this code path asynchronous.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifd0ca2a997f5d89307deb7ae686480544fb73140
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475922
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is in preparation for making the per-ns-type
populate_namespace functions asynchronous.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I63176e0d117eb91de82b3f8b68a18de592e0a980
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475921
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There's no need to support cb_fn/cb_arg parameters
to bdev_nvme_populate_namespaces. Just have it
call populate_namespaces_cb() directly.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9cf5f1f79ea8650b2e82654a0ce770d89e0a06f7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475920
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
OCSSD is handled specially now by nvme_ctrlr_populate_namespaces,
so we don't need any extra handling.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I39a9f0a9d14aa8c32c1fda6055e26d8eb712b107
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475919
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Some NVMe modes will be creating bdevs by their own.
For such case they have to have a way to add and remove
bdevs to/from controller.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ia188ad43695689358569cfd230b6bc39c15efce2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469980
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Rename common remove functions so that they align
with naming convention.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I8200c2f916ff45e03fb097c5f78eff0782b96c86
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/474248
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a part of changes required by upcoming patch.
This will also require moving bdev_nvme_unregister_cb
function to common.c.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Icc14534db4aec903542a94588d22b0ea9d43f47a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470439
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The OCSSD ones are just nops for now.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iab87bd8110dac2ba2f81d056f0034a53818e2b17
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475799
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Let's reuse this function in the remove path, to avoid
some code duplication.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I33519e093dafc71e7ccb6aad40638d33a820a0a5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475798
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Now call it nvme_ctrlr_depopulate_namespace, to match
some of the recent renaming.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3953530e3322925ca0b4a5c72bfba4a90cecf35c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475797
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will better match the recent renaming to the
functions associated with this flag.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia7a0f3a50ae59b1d76d66443c91a98dc576f4d09
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475796
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Eventually these may be defined by the NVMe spec, but
for now add something local to the bdev/nvme module.
These will currently only differentiate "standard"
namespaces from ocssd namespaces.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7853c97f3d3c28fd9f2fcd2440c57dc262954b46
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475795
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
These basically do the same thing. We'll basically
keep the populate function name, but apply it to the
existing update function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I005e983c86f2f714a240b3ba77bd2ca9463687ee
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475794
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We're going to reuse this code in a more common path
which would raise the visibility of these noticelogs
significantly. These aren't exceptional conditions,
so there's no need to print them when they happen.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1b56e3a4e5603e223bae07dc1c9e1ada03ba5901
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475793
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
A controller with no namespaces is perfectly valid.
So remove the noticelog when a controller with no
namespaces is found. This helps reduce some complexity.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ica184f1209414185dd4df3531f3a1002a2899590
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475792
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It is done to allign with the new way of handling NVMe
bdevs vs namespaces.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ic541e3ef244e538dff3990bf2be003dcc0349721
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471703
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will allow us to reset the controller when we get disconnect events
from the underying transports.
Change-Id: I825985219f98ff65cfcf7581757bd26db5bd08ba
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473762
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When doing a controller reset on an nvme bdev, we should always use the
bdev_nvme_reset function which ensures that we destroy all of the I/O
qpairs before performing the reset. This prevents us from performing a
reset and leaving the I/O qpairs in a disabled state preventing I/O from
being processed.
Change-Id: I6309421322f6c884327ade4515fc9402b25c0c1a
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473743
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The generic bdev layer currently has a lot of snychronization built into
spdk_bdev_reset. However, in a couple patches I am going to introduce a
few instances where I call bdev_nvme_reset directly from this module.
The reason I call bdev_nvme_reset directly from this module is so that I
don't have to open a descriptor to the bdev in the module itself.
In order to be able to call bdev_nvme_reset from both this module and in
response to a bdev_io, we need to synchronize and queue reset requests.
Change-Id: I7ece41119cba705a7481d365d20a1eb746a80f64
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473754
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is the data structure we end up using here anyways, and it will
make this function a little bit more versatile.
Change-Id: I530cb5b1b94f57cad4bb3931fc4b7a6335b6a00e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473742
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Also, add a small callback function to display an error when reset
fails.
Change-Id: I74c9e9f6842cbd3b608eae2178bd3605cd642fbd
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473741
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The new name, _bdev_nvme_reset_create_qpairs_done will help distinguish
it from a future function _bdev_nvme_reset_complete which will become
the new completion point for a reset.
Change-Id: I4f538a57e3c3de6c21afdd79febcdf01ad079342
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/474606
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Some future NVMe namespace types will be able to
create multiple bdevs per one namespace. This
patch makes it possible.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I47b4c1fc545c59dcc3171ab0960f1835b6aa6d24
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471620
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In future implementations it will be possible to create
different types of namespaces (standard, OCSSD, ...).
This patch introduces new nvme_namespace type which
will make possible to implement such cases.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I27747d3985915f45c0e0a28dd5f391cca06b13cc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471273
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch moves around code related to unregister
flow. This is a preparation for upcoming changes.
It also changes IO device for NVMe bdev to
nvme_bdev_ctrlr to make code clearer.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ic97a5b1973923a0cf44ed6c2d51b707dd7628d2c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468980
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
If specific NVMe mode requires asynchronous bdevs
creation we cannot free probe ctx until all bdevs
are created.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ie758f2fa8068c4090b7ce76c73967483441166cd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468453
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
With this change the new callback create_bdevs_cb
is introduced. This callback may be used by future
NVMe controllers which require asynchronous creation
of bdevs. This will make future implementation easier
because we will only have to call callback function.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ib46a38cf71bc783db58be9021efd06fcd547c4d9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469699
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Users already have to poll the admin queue, so embed the io_msg
queue polling there to simplify the API.
Change-Id: I4d4d3be100be0798bee4096e0bbda96e20d2405e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472833
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added RPC commands to register/unregister CUSE devices
to NVMe controllers:
- bdev_nvme_cuse_register
- bdev_nvme_cuse_unregister
Additionally two RPC now return CUSE device names:
- bdev_get_bdevs for namespaces
- bdev_nvme_get_controllers for controllers
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I69c4bf41ec8f78a7522894268a67dd733881712f
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472211
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added spdk_nvme_io_msg_process() in bdev_nvme_poll_adminq()
to process io messages that were passed from non-polled mode
threads to the controller.
This is used as part of nvme cuse support for surfacing
/dev nodes that can be used by standard Linux management
applications like nvme-cli.
Change-Id: If9e2e0b472c332aee54e3c6674bdd5fe616ab07c
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469692
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This change allows setting of the NVMe completion queue
CDW0 in spdk_bdev_io_complete_nvme_status.
Before that change, handling of vendor specific NVMe IO
commands was limited since there wasn't a way to return
command specific info back to the initiator.
Change-Id: I250d5df3bd1e62ddb89a011503d42bd4c8390f9b
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470678
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add rpc commands bdev_opal_lock_unlock, bdev_opal_new_user.
Admin can add new user for opal bdev created and the user can
lock/unlock the bdev by himself.
Change-Id: I9a1e360399617b5a039dc5353097ab525c7eb964
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471475
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Init commit for opal vbdev. Opal vbdev is built based on
bdev part module. We split nvme namespace to spdk_bdev_part
with user specified offset and length. And then use this
configuration also to set up locking range for Opal.
Use linked list g_opal_vbdev to track all configuration for
each vbdev. And use g_opal_base to track the part_base for
all vbdevs.
This patch only shows the process for creating/deleting a vbdev
for an opal-enabled nvme ctrlr.
change-Id: I6073637d7360ebdd6b53fb7b6a01ad73f1daa98e
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468190
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Due to upcoming change we cannot use the same count
pointer in rpc call and bdev creation function.
With async bdev creation there will be a problem
when freeing context.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I98da89481d7f506161d8adf5a1b2365907385a13
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468463
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This also requires change of type for count field
in rpc_bdev_nvme_attach_controller_ctx structure
and argument type in spdk_bdev_nvme_create function.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ifc679558b0744ada021f5ce367beb83b35f30b3a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470135
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
OCSSD NVMe will use separate RPC call to create bdevs
so don't call bdev_nvme_create_bdevs for it.
Additionally change bdev_nvme_create_bdevs arguments
to take nvme_async_probe_ctx structure to simplify
future changes.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I07ad8034058d8b3a0c78627db1fd0ba3db5a211b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468223
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is required to use spdk_bdev_nvme_create function
for other NVMe modes.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I47dcb41689c7ec696ca6e76c35c81b497655d29a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468342
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This change will make possible to use connect_attach_cb
function with other NVMe bdev types. Changing
bdev_nvme_create_and_get_bdev_names function name
to more suitable.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I0bf79aba65914b4ac1826200f7d049e1c26276f4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468594
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Separating these two functions will make possible to use
create_ctrlr function for othe NVMe bdev types in the
future.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I3d503a3bf0d317f77beeb827c761b93d66a643ea
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468593
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The new name comes first, the old name comes last.
Eliminates warnings at app start time for
set_bdev_nvme_options and set_bdev_nvme_hotplug
aliases.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia5ff3012e97bf59a6ecd9282dfc5cc0796ca7630
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466967
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is more accurate to what they are, and will make defining library
dependencies much simpler. This change in directory does not affect the
final placement of naming of libraries at the end of time.
Change-Id: Ic48a9233dff564e39ce357a9ea0a111ea2b6414b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465454
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
