make uses /bin/sh as its shell and some distributions set it to shells
that don't support [[ command (e.g. ubuntu and dash). This causes the
check to fail with the following error:
/bin/sh: 1: [[: not found
So, replaced the [[ command with a redirection to /dev/null, which
should work on all shells.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Idcae094e8faa3da6faac16754bb0484bd91363d8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15852
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Replaced grep with a [[ command to get rid of errors like this:
collect2: fatal error: ld terminated with signal 13 [Broken pipe]
during the build.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I03d0f3966882faabfff52ad01e132e837fe94433
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15820
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Found with misspell-fixer.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: If062df0189d92e4fb2da3f055fb981909780dc04
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15207
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Some old compilers like gcc 4.8.5 don't support
this flag, that leads to compilation failure.
Add a check that the compiler supports the flag,
it will allow to compile SPDK with old versions
of gcc
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: I80fd6e4f1f792be107ecac593318e1da877219c4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15688
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
per Intel policy to include file commit date using git cmd
below. The policy does not apply to non-Intel (C) notices.
git log --follow -C90% --format=%ad --date default <file> | tail -1
and then pull just the 4 digit year from the result.
Intel copyrights were not added to files where Intel either had
no contribution ot the contribution lacked substance (ie license
header updates, formatting changes, etc). Contribution date used
"--follow -C95%" to get the most accurate date.
Note that several files in this patch didn't end the license/(c)
block with a blank comment line so these were added as the vast
majority of files do have this last blank line. Simply there for
consistency.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Id5b7ce4f658fe87132f14139ead58d6e285c04d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15192
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
This implementation of xNVMe BDEV module supports the char-device / ioctl-over-uring,
along with the "regular" io_uring, libaio, POSIX aio, emulated aio (via threadpools) etc.
Code changes done :
a. Addition of xNVMe submodule to SPDK
b. Modification of RPC scripts to Create / Delete xNVMe BDEVs
c. Implementation of xNVMe BDEV module
Signed-off-by: Krishna Kanth Reddy <krish.reddy@samsung.com>
Change-Id: If814ca1c784124df429d283015a6570068b44f87
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11161
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
valgrind doesn't support AVX-512, and latest compilers
will use newfangled instructions to do simple
integer-to-fp conversions which then break valgrind.
The only place where we would really use or need
AVX-512 is in ISA-L, so disabling those instructions
in SPDK is fine.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I48f3dd4f1b5813485a92c81d01e513c950ada205
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13554
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This is done mainly to align the final location with the one listed
in the .pc files created for each lib.
Signed-off-by: Michal Berger <michallinuxstuff@gmail.com>
Change-Id: I99d6875c9e26f8202723dd6d73bd865b6478bcf9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12978
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Users can now provide custom location for openssl lib.
Example:
./configure --with-openssl=../openssl-3.0.2
LD_LIBRARY_PATH=../openssl-3.0.2 ./build/examples/hello_sock --help
Change-Id: I07b653ddef5e6333d4e7bf4c05144601eb4ee275
Signed-off-by: Boris Glimcher <Boris.Glimcher@emc.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13470
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Many open source projects have moved to using SPDX identifiers
to specify license information, reducing the amount of
boilerplate code in every source file. This patch replaces
the bulk of SPDK .c, .cpp and Makefiles with the BSD-3-Clause
identifier.
Almost all of these files share the exact same license text,
and this patch only modifies the files that contain the
most common license text. There can be slight variations
because the third clause contains company names - most say
"Intel Corporation", but there are instances for Nvidia,
Samsung, Eideticom and even "the copyright holder".
Used a bash script to automate replacement of the license text
with SPDX identifier which is checked into scripts/spdx.sh.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaa88ab5e92ea471691dc298cfe41ebfb5d169780
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12904
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: <qun.wan@intel.com>
-march=native is not an allowable argument for GCC on RISC-V.
Not providing -march will let GCC fallback to its built in default.
This is preferable to specifying a safe fixed value like -march=rv64gc.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Change-Id: I5e11179323b005f330be4752012285451e791205
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12880
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
libvfio-user has switched from cmake to meson; update the submodule for
this, and switch over to building with meson.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ia0749590271d0b74260c9118692c21e2a82dde23
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12640
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is continuation of previous commit on OpenSSL 1.1
The new 1.1 version is needed for TLSv1.3 support.
By default centos7 uses openssl-devel version 1.0.2k.
The newer version 1.1.1k is available with EPEL repo.
From the naming perspective for pkg-config:
- Only Centos7 via EPEL calls it `libssl11`
- All the rest call it `libssl`
Even on Fedora with OpenSSL 3 is is called `libssl`.
See:
$ pkg-config --modversion libssl
1.0.2k
$ pkg-config --modversion libssl11
1.1.1k
$ pkg-config --modversion libssl
3.0.2
So it's safe to check for `libssl11` here
Change-Id: I60b161b166055b6aa4dc3b1f674a29cb7b3bb7c8
Signed-off-by: Boris Glimcher <Boris.Glimcher@emc.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12516
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
- In case that --with-dpdk=dpdk/install option is used, we need to link
with the proper IPSec_mb libs the DPDK was built with rather than using
the default location of IPSec_mb submodule located inside the SPDK dir.
- Check with pkg-config if we need to link with IPSec_mb. Find the proper
IPSec_mb library path for DPDK specified with --with-dpdk=dpdk/install
option.
- Use the same behavior for plain --with-dpdk.
Signed-off-by: Yuriy Umanets <yumanets@nvidia.com>
Change-Id: Iea56d20d20556d63cb7ffb5ce2ca78f2244796e1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11617
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
LLVM provides libFuzzer which does coverage-guided
fuzzing of a library or application under test. For
SPDK, we can use this as a new and better way to
generate random commands to the SPDK nvmf target.
By default, libFuzzer provides the main() and your
source file just provides the function called by
LLVM for each iteration of random data. But this
doesn't really work for SPDK since we need to start
the app framework and the nvmf target. So we
specify -fsanitizer=fuzzer-no-link, explicitly
specify the location of the fuzzer_no_main library
and then call LLVMFuzzerRunDriver to start the
fuzzing process once we are ready.
Since this is all coverage-guided, we invoke the
fuzzer inside the nvmf target application. So this
patch creates a new target application called
'llvm_nvme_fuzz'. One core is needed to run the
nvmf target, then we spawn a pthread to run the
fuzzer against it.
Currently there are two fuzzers defined. Fuzzer 0
does random testing of admin commands. Fuzzer 1
is focused solely on GET_LOG_PAGE and fuzzes a
smaller subset of the bytes in the spdk_nvme_cmd.
Additional fuzzers can be added in the future for
other commands, testing I/O queues, data payloads,
etc.
You do need to specify CC and CXX when running
configure, as well as specify the location of the
special clang_rt.fuzz_no_main library. The path of
that library is dependent on your clang version and
architecture. If using clang-12 on x86_64 platform,
it will look like:
CC=clang-12 CXX=clang++-12 ./configure --with-fuzzer= \
/usr/lib/llvm-12/lib/clang/12.0.0/lib/linux/libclang_rt.fuzzer_no_main-x86_64.a
Then just do the following to demonstrate the fuzzer
tool.
make
test/nvmf/target/llvm_nvme_fuzz.sh --time=60 --fuzzer=0
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iee0997501893ac284a3947a1db7a155c5ceb7849
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10038
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Additionally:
In release 1.0 intel-ipsec-mb module moved main header
(intel-ipsec-mb.h) from main directory of the project
to the /lib directory. This change aims to address that
and allow for a successful build.
Change-Id: Idd6ec90396166c94ca492ef1d2038331adbbc36c
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7976
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
The standard is now specified explicitly. The chosen standard, c++11,
is the latest supported by gcc-4.8.5, which is the oldest compiler still
in use on some systems (centos 7).
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I7ba84278b28e6d96f43b52014c358a74902188b9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9597
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
If a library contains C++ code, use a C++ compiler when creating a
shared object. This ensures that the standard C++ libraries are
listed as dependencies.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Icc5321a628682e6dbdab0c053784e0750ebd29c2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9448
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This isn't required - we already have the whole build/
directory in the top level .gitignore.
When we remove build/lib/.gitignore, it means
build/lib directory must be created somewhere
before we try to place a library there. Top-level
builds get this directory created automatically,
but building directly from a sub-directory's
Makefile means we need to explicitly create
build/lib. So add a mkdir -p to the LIB_C
macro to do exactly that to cover these cases.
Also simplify 'make clean' at the top level Makefile.
A lot of work went in there to work around this
.gitignore file that's not needed now that we've
fixed the underlying problem by getting rid of
it.
Suggested-by: John Levon <john.levon@nutanix.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibb92ff84d8c2a9bbe3e193c84f15ef3866f07b1f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9169
Reviewed-by: Nick Connolly <nick.connolly@mayadata.io>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch is used to add the kernel idxd support.
Without this patch, we can use userspace idxd driver
under accel_engine library (module/accel/idxd/accel_engine).
With this patch, we can also kernel idxd driver under the
accel_engine library.
Our approach is implementing a wrapper library to use IDXD
device by leveraging the kernel DSA driver in SPDK idxd library
(lib/idxd).
Then users can leverage the RPC later to configure how to
use the DSA device by user space driver or kernel driver.
In this patch, our approach is to use the idxd-config library
to export the WQs (Working Queues) exported by the kernel.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I3a25a4fe0327bd626bf6883dfbe54437d3209e51
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7331
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
SYS_LIBS var is used to generate Lib.private section of
spdk_syslibs.pc
lack of pthread can result in linking issue when spdk's *.pc are used
please note that usage of -lpthread and -pthread is not consisent
within system wide pc files
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I2dd327371d5621ea12f1e2f7abdfe6b7aa6602eb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7253
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Szulik <maciej.szulik@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
zipf is a power law probability distribution. When
applied to performance testing of block devices, it
will select blocks over the full range of LBAs, but
will more frequently select lower-numbered LBAs.
The theta parameter governs the distribution - higher
values of theta will concentrate the distribution on
a smaller number of LBAs.
Note that fio supports zipf, so adding it to SPDK
will enable our perf tools (bdevperf, nvme-perf) to
provide similar functionality.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7df129c9d61996a2070188c6cd9f1fde631ac208
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7779
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
At least on some Ubuntu distributions, default
vfio-user install puts libs in usr/local/lib instead
of usr/local/lib64.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib312d8ca9b4ce9e858a9a9e76525fc8afd48ced5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7825
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: <dongx.yi@intel.com>
When building spdk on ARM platform like thunderx2 with --enable-debug,
there are following error:
/tmp/ccOBb4AF.s: Assembler messages:
/tmp/ccOBb4AF.s:45: Error: selected processor does not support `casp x0,x1,x2,x3,[x4]'
/tmp/ccOBb4AF.s:77: Error: selected processor does not support `caspa x0,x1,x2,x3,[x4]'
/tmp/ccOBb4AF.s:109: Error: selected processor does not support `caspl x0,x1,x2,x3,[x4]'
/tmp/ccOBb4AF.s:141: Error: selected processor does not support `caspal x0,x1,x2,x3,[x4]'
The reason is that DPDK is built with -march=armv8.1-a or -march=armv8.2-a+lse which
have these instructions while SPDK is built with -march=armv8-a+crc which does not support
them. Change spdk build machine to native can fix this.
Signed-off-by: Rui Chang <rui.chang@arm.com>
Change-Id: I759d4ce2c557ce5ff73a802d7a4b6579c4ba64f7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7025
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Some versions of the file (e.g. 5.33) confuse the sharedlib files with
pie-executable ones when they already have the executable bit set.
Since this particular bit is already set on the .so.* when they are
built, file may report the type as "application/x-pie-executable"
instead. As a result, lib files won't have proper permissions set
when installed.
This is a bit problematic for building the RPMs since when
find-provides kicks in to determine the dependencies, said files
are not picked up at all - package ends up with empty "provides:"
data breaking the dependency lookup during installation of other
packages which may depend on the broken one.
To mitigate, don't use mime-type, simply run file against the lib
in default mode and look for "shared object" string - this should
work for most of the file versions available on the supported
distribution.
Spotted on Fedora31.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: If9974f5acbdad6eb1204b64f0ee1ac9b2e20f85b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6703
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I191ad5e3b153fb563256eba1aa695716f66db788
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6377
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Some platforms require that a specific file extension is used for
executables. Append $(EXEEXT) to $(APP) definitions to accommodate
this. The name EXEEXT has been chosen for consistency with automake
which uses the same variable for the same purpose.
Add extensions for generated files used by Windows to the 'clean' target
(.obj, .lib, .pdb) and add output files to .gitignore.
Tested using a cross compiler that forces a .exe suffix and verifying
that all LINK messages include the correct suffix and that a second
call to make does nothing (showing that the targets match the
generated executables).
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: Ief012f6294d2f94b23c8b4f9747e21a0dfb91e96
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6494
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
MinGW builds require a thin layer above the standard libraries to
provide POSIX functionality that is missing on Windows. Add support
for building this.
MinGW cross builds are experimental and work is ongoing to integrate
them into the CI and test environment. Including the changes at this
stage is being done to facilitate that process.
The layer has been arranged in the same way as DPDK and is
accessed as an external build using ./configure --with-wpdk=<dir>.
Support has also been added for using a default ./wpdk in
preparation for reaching the required level of stability.
The help text for ./configure indicates that support for --with-wpdk
is experimental.
Further details and instructions can be found at https://wpdk.github.io.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: Iff0f705789f19fb193dcb3c9090c3e90613a8d9a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6589
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add -mstack-protector-guard=global to work around GCC bug 86832,
where -fstack-protector will attempt to use native TLS, but mingw only
supports emulated TLS. This causes a segmentation violation at the start
of any function protected by stack-protector. The issue exists in GCC
versions prior to 8.3.
Enable -mstack-protector-guard=global which uses a global variable for
the guard value. This is the behaviour with the fix, so there is no
downside to enabling it for all versions of GCC on Windows.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: I85bc831043585071b0d8b0a3dd637b8d9ff26dab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6575
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Check compiler target triplet for the strings 'windows' or 'mingw'
and set OS to Windows. If found, adjust basic parameters:
Set EXEEXT to indicate executables have .exe suffix.
Exclude 'relro' and 'now' flags which are not recognised on Windows.
Exclude 'noexecstack' flag which is not recognised on Windows.
Exclude -pthread flag because Windows doesn't have POSIX threads.
Include libssp.a to support stack-protector and _FORTIFY_SOURCE.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: I94a45d3123ebc81f5529006fa07b05da897e5866
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6574
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Users may not use SPDK libvfio-user submodule, so add a
library path for this case, users can still just use
'--with-vfio-user' without adding the path, for this case
a submodule default path will be used.
Change-Id: Ib0dd82ab6910056ff21b5b2d373c0d16916162c6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6471
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Previously the libvfio-user didn't install the static library to
the install directory, with that fix in libvfio-user, we can use
the install directory now.
Change-Id: I3f232395a6dc3bf6d7d3937b245eb10c4b6a0e26
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6470
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
gcc -dumpmachine may provide the following output:
ppc64le-redhat-linux
To detect PowerPC system we should check for both
"powerpc%" and "ppc%" strings
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ifb5afe743797177afa4f1b541a0c8ccaf4befbda
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6378
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Intel Control-flow Enforcement Technology (CET) is a
processor feature that blocks return/jump-oriented
programming (ROP) attacks.
It is currently only supported on Tiger Lake client
processors, but will be available on other processors
in the future.
CET requires toolchain support. gcc8 does support it.
For now, this will opt-in only at least until the
technology is available on server processors.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8c7f882eeeaed26484c31dc0d67d5cc42baeaa2d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5921
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Users can now generate the necessary linker args for their
own applications using something like:
PKG_CONFIG_PATH=build/lib/pkgconfig pkg-config --libs spdk_nvme
Dependencies between libraries are included in the generated
.pc files, so the user only needs to pass the top-level subsystems
or individual SPDK libraries they are using in their application.
Modules will automatically be added to the output if the associated
library is specified. For example, specifying "spdk_bdev" will include
the libraries not only for spdk_bdev, but also all of the bdev modules.
Users still need to supply the -Wl,--no-as-needed or -Wl,--whole-archive
flags. They cannot be added to the .pc files without increasing the length
of the argument string by a factor of 15x to 20x.
Modify the test/external_code/hello_world Makefile to use pkg-config to
ensure this gets tested at some level in our autotest environment.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie48a75f11969d5d775d514cf10bcb82d197eabfd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4371
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There are cases where spdk.common.mk can get included
more than once in a Makefile. So avoid duplication
in SYS_LIBS by initializing it before appending text
to it.
The duplication was harmless but a bit annoying.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idf081f973e15a9ab6ec9211b9a3cbf02c736c7a0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5676
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This avoids duplicating it in several different
Makefiles.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I85f4886ec6744c23639d24867e2c68757dfeba32
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4484
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
We use some implicit depdendencies in our subsystem
libraries. With at least some linkers, these
dependencies are not written into the shared library
file if there is no actual symbol dependency found.
So use --no-as-needed to ensure the dependencies
stick.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idb476efb50b00ff04f5640b4e5a1362a1f096fa7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4796
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Some SPDK apps were linked with env even though they
didn't use it.
Top-level makefiles can now specify SPDK_NO_LINK_ENV=1.
Change-Id: I057baa5b620f20d829185025dc2e8efdcfa03fac
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3417
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
This patch removes implementation of VPP socket abstraction
along with ways to compile it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I089f7703cfc4fb517f8f80f4368e544bced549b6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3734
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Automatically place binaries produced from the app directory
into build/bin. This matches with the output in build/lib
that already exists.
Change-Id: I13cd2da71d2f88592e22308fe8a907bf458458b5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2379
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
It was broken since long ago. --enable-log-bt doesn't change
anything. log.c expects SPDK_LOG_BACKTRACE_LVL to be defined
for backtrace to work, but it's not defined anywhere.
Apparently nobody needs this, so remove it.
Change-Id: I2313fd24198b0bf718663f2eafee9b5c6efa0a7f
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2194
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
