Remove configuration of an error vbdev at the removal of the vbdev.
This will lose the strict compatibility but the next patch will make
possible for us to add the removed config dynamically.
This patch will make the implementation cleaner and will not lose
any usability.
Change-Id: Idea7767ab5424427f912c82c66ff7d59d28108ab
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403915
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Our implementation of WritableFile::Allocate() was wrapped in #ifdef
ROCKSDB_FALLOCATE_PRESENT, which is set based on whether the target
system supports fallocate(); SPDK doesn't use the kernel filesystem
interface, so using that check makes no sense.
The #ifdef was also incorrectly wrapping WritableFile::RangeSync() and
WritableFile::GetUniqueId(), which are totally unrelated to fallocate.
Change-Id: I9655074353f79cf7a63e3e3d9c455cd39a683062
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/405332
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
All of the uses of this member variable treat it as uint64_t.
Change-Id: Iba9cf2eae1f2bd79617e2785ad498526f1115c10
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/405331
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Make sure spdk_fs_open_file() succeeds in all of the RocksDB environment
file constructors. NewSequentialFile() already checked this, but
SpdkRandomAccessFile and SpdkWritableFile did not.
Change-Id: Ie298e0cd29366eb698a0358740310fec62af7f9c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/405326
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Some error paths before _spdk_bs_alloc did not
destroy bs_dev.
After succesfull _spdk_bs_alloc, destroying is done
in _spdk_bs_free.
Change-Id: Ib69ae9707e12a646af80f7892af49cc4f79c199e
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/405223
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Blobstore supports only block lengths that are less than
SPDK_BS_PAGE_SIZE or when multiplication of block len
results in SPDK_BS_PAGE_SIZE.
This was checked only on spdk_bs_init(), but not spdk_bs_load().
When not checked, it caused issues with lvol store tasting.
During tasting, there is an attempt to perform spdk_bs_load()
on a given device.
It was possible to hit asserts in blobstore by creating
malloc with block size 8192.
Change-Id: I30b62bebad405b581eb2158925884adc616d9b92
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/404537
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The malloc and null bdevs generate a random UUID if it is not specified
in the construct RPC method; save the current UUID in save_config so we
can reproduce it in load_config.
Change-Id: Iabaa96fa3129189ae6acf3635345b98f71255fbd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/405110
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function retrieves the UUID from a namespace, if available.
Change-Id: I98c55375948b92eaf429b41fb36dfea4e2b780a2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/404734
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Convert nvme_ctrlr_cmd_identify_controller() and
nvme_ctrlr_cmd_identify_namespace() into a single function,
nvme_ctrlr_cmd_identify(), with generic parameters that should be
suitable for all current callers as well as future users.
These functions were internal-only, so there is no public API change.
Change-Id: I3dbb3e6b00308b67ba1f161f8a6b11b6333fca57
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/404733
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also, device removal is now always deferred to simplify
the locking.
Change-Id: I6b994531630b64860da728a93a0f2d613d8aa5ba
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/405181
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Each device was being removed from the tailq twice.
virtio_scsi_dev_remove does the removal by itself.
Change-Id: I2320fc88ac60ddd5952b07b26c679c8f2e887976
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/405180
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
g_virtio_driver contained just a list of all
Virtio-SCSI devices. It's now being removed for
two reasons:
* it's backend-specific, doesn't fit a generic virtio lib
* it's difficult to ensure thread-safety for it
Virtio bdev modules will now manage their Virtio
devices by themselves. Virtio-SCSI has now an internal
device list. (And VirtioBlk module maps devices to
bdevs 1:1, so doesn't need any additional work here.)
Change-Id: I3bc68d76d6904df5c56f00fca7ab387871ecf88f
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/405179
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This just moves some code around in preparation for an upcoming patch -
no functional change.
Change-Id: Ib1584fcf65d1be2063766588a79c434ad5fef716
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/404032
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is not needed - we can easily get the number
of clusters from the underlying blob.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I94a716731bd1b8c4b333fe295bd5a963928b4330
Reviewed-on: https://review.gerrithub.io/404615
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is always just the number of clusters in the
underlying blob. The length xattr was set but never
retrieved later so it's obviously not needed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8ccb93498ab322247209242b0faf733a90cd4307
Reviewed-on: https://review.gerrithub.io/404614
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Upcoming patches will make spdk_blob_resize() asynchronous
to allow for resizing while I/O is in progress. During
blob creation, it is not possible for I/O to be in progress,
so just use the internal _spdk_blob_resize which will
remain synchronous and called only after I/O is frozen.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I02128612a5f1bcd8bb236da113b05e88aa52c310
Reviewed-on: https://review.gerrithub.io/404613
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This internal function then will match noun/verb order
of the public spdk_blob_resize function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0d49af6502438b3571eebe5c87abe96a8fb77658
Reviewed-on: https://review.gerrithub.io/404612
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Write information needed to recreate each bdev.
Change-Id: I3d2b24fd4aaa8b98ec558d864cc28b55a899452f
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/401217
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Support the virtio RO flag, so that read-only devices
will successfully initialize now. Also do not allow
issuing any writes on a read-only device, so we don't
flood it with requests that are to fail.
Change-Id: I6b77f2338e4478a9abf2d5286344f6412d79284c
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/393461
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This fixes a double free in spdk_app_fini().
If spdk_app_start() failed, the g_spdk_app.config
was becoming a dangling pointer which would be
accessed and freed by spdk_app_fini()
Change-Id: Ifa833f5706d391356df39db4e1c538db7a1c7dcb
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/404358
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Set Features - Asynchronous Event Configuration has reserved bits in the
CDW11 value, which we shouldn't allow the host to set. Explicitly set
them to 0 in the Set Features handler to avoid propagating them to the
Get Features return value.
Change-Id: I73ed87d6d310e585c073b1db3b875147b4727007
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403902
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Most Get Features commands can be handled by just setting CDW0 to a
particular value and returning success.
Get Features - Host Identifier needs special handling, so it isn't
converted.
Change-Id: I8a3e2d5659a9ecbb3904589912ccf44d0d25b715
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403901
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
No functionality change, just a cleanup. This will help with future
simplification patches.
Change-Id: Id2efd851ed0add664e516725ab98b5e1f8cafff5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403900
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This uses libiscsi to implement an iSCSI initiator bdev
module for SPDK. Still a lots of work to do on this - posting
it in case anyone is interested in working on this further.
A number of todo items are listed in a README in the lib/bdev/iscsi
directory.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Change-Id: I060e33de0cd6796246789bf0e1bb4f2df59d8f71
Reviewed-on: https://review.gerrithub.io/390313
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Example showing the basics of a vbdev via a module that implements
the main functions, and a few extras, needed for a vbdev. The tests
also demonstrate how to configure an application to use a vbdev and
an underlying bdev
Change-Id: I67bf542143eb6532465cdb6af63c0f2ab7084c0e
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/399768
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A new optional parameter is added to the NVMe-oF target namespace
options to set the Namespace UUID, which will be reported via the
Identify command Namespace Identification Descriptor list.
Change-Id: I53c6d6fa6475d3395d412d196b42000715e9ed81
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/400894
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Previously when operation for blobstore was spanning multiple
clusters, it was split into multiple operation processed in a batch.
This made it possible to max out channel ops when using large enough
operation. It was encountered when issuing unmap for whole device.
Now single large operation is processed sequentially, making
it take at most one ops from channel.
Fixes#251Fixes#250
Change-Id: I132309877ba3b2d7217332daf1025fb5f9ee74d0
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/403306
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The unregister callback is only invoked after all I/O channels related
to the I/O device have been freed. The last I/O channel to be freed
might be on a thread different than the thread where spdk_io_device_unregister
was called. If this is the case, send an event to the latter thread
so that the callback gets called on the same thread as spdk_io_device_unregister.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3c910198fbd83eae95e5c57d618284e64db46ff7
Reviewed-on: https://review.gerrithub.io/404414
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We must keep the lock held after removing the io_ch from the thread
before iterating the list of threads to check for other channels
referencing this thread. Without it, it is possible for two different
threads to think they are the last thread holding a reference to
an unregistered device, and both will call the unregister_cb and free
the dev memory.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifcc18752937731722fefc6e2161ee41443c4fb86
Reviewed-on: https://review.gerrithub.io/404410
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Patch 583a24a4 [1] moved io_outstanding field to the
bdev_module_channel as it was needed there. This patch
re-adds another io_outstanding field to the bdev_channel.
We *do* want to count outstanding I/O for particular bdevs
- mostly for debug purposes.
[1] 583a24a4 ("bdev: share nomem_io data between bdevs built on the
same device")
Change-Id: I723e72c36447f9f778f88fc1769619676cbbaf71
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/396871
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The version of ittnotify_static.c shipped with VTune Amplifier XE 2017
triggers the new GCC 7 -Wimplicit-fallthrough warning.
Change-Id: I8a43beddf464853407639742b1eb89bcac39136d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/404211
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Simplify the handling of I/O completions that need to be sent as a
message so that they are handled in a single place in
_spdk_bdev_io_complete().
Change-Id: Ic94354ad947d0f1f11241f728aa194a105ff96c4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/404184
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Flip the status != NOMEM check around so that the logic is easier to
follow.
Change-Id: I607e8b5f0cfaa3598a623d0fc3642b11bd42decd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/404175
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
vbdev_error_init holds config information and examine() uses it.
This patch is necessary to keep compatibility from the .INI config
file to the upcoming JSON config file (based on JSON-RPC).
Change-Id: I1601b7e0dad5f93662177c59536776afd974ff07
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403913
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The static variable g_connections_per_lcore can be configured by
.INI config file. However it had not been added in the iSCSI options
because it was not iSCSI global parameter.
This patch is necessary for JSON config file to configure it.
Change-Id: I12aa1d94dd467969a6853b9fb3f8a627d0d70766
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403623
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now that the NVMe-oF target emulated controller supports Identify with
CNS = 03h (Namespace Identification Descriptor list), I believe we
support all of the mandatory parts of NVMe 1.3, so let's increase the
reported VS/VER fields to 1.3.
Change-Id: Iee1052bf9ee1a0954f47770c7e5151886e63f11c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403891
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A few places were accidentally storing namespace IDs in uint16_t.
Change-Id: Iae9d709fb20bc1ac0a584ccd9683b721ce5de961
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403886
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Move the commonly-accessed fields to the front so they end up in the
same cache line where possible.
Also tweak the types of type, status, error.nvme.sct, error.nvme.sc,
error.scsi.sc, and error.scsi.sk (they can fit in 8 bits), and move the
Write Zeroes splitting variables into u.bdev.
This reduces sizeof(struct spdk_bdev_io) from 272 to 224, in addition to
the better cache line usage.
Change-Id: I4a91fd07f252e7add4a2db179df9c53268672198
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/404053
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Re-word confusing comment in spdk_iscsi_read_pdu() and
simplify a return path in spdk_iscsi_handle_status_snack().
Change-Id: I15bd8b2f45d0e45cf4a4a34533ecb8af0a154531
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/404034
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Its possible for a net_framework to have initialization and finish
functions. This patch adds mechanism to register spdk_net_framework
and executes appropriate functions during subsystem start/finish.
Change-Id: I06d9cb6e98f843794296b833caa3c79735f06f12
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/403703
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id370631770cb2e090c3efbe95cd86db4f6168c5e
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/403702
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The sock abstraction wraps these functions now, so the iSCSI layer
doesn't need to include them directly.
Change-Id: I900ed96a9cfb5d12c7fd190bc590d00846a47034
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403879
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Prepares spdk_iscsi_execute() to handle the case where
spdk_get_pdu() will return NULL in a future patch instead
of abort()'ing.
Change-Id: I8f7e46495db2c517970e7e5de6ace1b13159b42b
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/403883
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Prepares spdk_iscsi_send_r2t() to handle the case where
spdk_get_pdu() will return NULL in a future patch instead
of abort()'ing.
Change-Id: Id18c39a7ea0ea748f1ecb842aee9a08594fb2a48
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/403878
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Prepares spdk_iscsi_op_nopout() to handle the case where
spdk_get_pdu() will return NULL in a future patch instead
of abort()'ing.
Change-Id: I6a0563c14a1bddf219dd12de67f83b18d6fd82f4
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/403874
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Prepares spdk_iscsi_op_logout() to handle the case where
spdk_get_pdu() will return NULL in a future patch instead
of abort()'ing.
Change-Id: I31f854741906023c734151e3b00b939cdafb2ec4
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/403864
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Prepares spdk_iscsi_op_text() to handle the case where
spdk_get_pdu() will return NULL in a future patch instead
of abort()'ing.
Change-Id: I21036116936c50c5674e0d11bbb4a30938bf5336
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/403860
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Prepares spdk_iscsi_op_login() to handle the case where
spdk_get_pdu() will return NULL in a future patch instead
of abort()'ing.
Change-Id: I95da4ff967667f6439330d7959c6937c55522e9a
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/403857
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Prepares spdk_iscsi_reject() to handle the case where
spdk_get_pdu() will return NULL in a future patch instead
of abort()'ing.
Change-Id: Id29bed20cedbb7c42b75fcb0ce6070f561d4a3d0
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/403856
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Prepares spdk_iscsi_read_pdu() to handle the case where
spdk_get_pdu() will return NULL in a future patch instead
of abort()'ing.
Change-Id: I9ccfbf41821fb90a203fd8ad026f42fac10e9dbc
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/403745
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
ImmediateData in negotation parameters can be controlled by the config
file and currently "Yes" or "No" are valid values of it in the config
file. "Yes" or "No" means almost bool. Additionally, ImmediateData is
defined as boolean value in the iSCSI specification as follows.
However ImmediateData is an uint32_t variable and 0 or 1 are used in
SPDK now.
In the upcoming JSON config file, boolean value should be set to
ImmediateData.
Hence change all variables and constants related with ImmediateData
to boolean in this patch.
InitialR2T, DataPDUInOrder, and DataSequenceInOrder are not controllable
by the config file but these are defined as boolean value in the
iSCSI specification.
Hence change them to bool too.
Besides, AllowDuplicateIsid is used almost as boolean value. Hence
change it to bool too.
InitialR2T=<boolean-value>
ImmediateData=<boolean-value>
DataPDUInOrder=<boolean-value>
DataSequenceInOrder=<boolean-value>
Change-Id: I9f98b219687b3600194563b1d6b85551f4586144
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403237
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
For the CHAP setting of iSCSI targets, JSON-RPC handles the
value of parameters directly and dump of iSCSI targets can be
used to construct directly.
For the CHAP setting of iSCSI discovery session, the same manner
will be applied.
Change-Id: I8731af4273cc89ee5c4ea2f97955e56e3bff202d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/401076
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This enables more clear division of spdk_sock_* functions
and spdk_posix_* ones.
Change-Id: I329eaf99de9390c8473b57427966dfe6af777abb
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/403700
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
A net implementation should be allowed to not create a socket group.
It would basically mean that it is not participating in polling at all.
This came up during VPP integration. To enable using both types of sockets,
all types are polled within socket group. There is possibility of VPP
not being initalized at all (VPP process not running or failing connecting).
This would result in hard requirement of VPP always running when its
support is compiled into SPDK. Handling NULL here allows VPP to opt-out of
this polling.
Change-Id: Id3489eaba858ee64e8e8a924a6836720e84d9ad0
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/403699
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This was left over from direct mode.
Change-Id: I967e59f95cc097da09bb35ea77eb5f7423a4ac8a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403385
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Eliminate struct nvmf_tgt and the g_tgt global variable.
Change-Id: I6b737c4b85dc7d063ead1df5417d344c0f35a30d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403384
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
These don't need to be exposed in the subsystem-wide header.
Change-Id: I5da31b02aaa2fba6e19fbc90dbf4cabc90240b0b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403383
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
After the previous cleanup patch, this was just calling
spdk_nvmf_subsystem_create() without any other functionality, so call
spdk_nvmf_subsystem_create() directly from its call sites and remove it.
Change-Id: I5dc1a0a00025a120d71270c5a5c94e8d74c2a3ab
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403381
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This should be enforced by the main NVMe-oF target library, not in the
event subsystem code.
Change-Id: Ibce4fd78710b4a9da374e3d5979df4a16e91533c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403380
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
After the previous cleanup patches, this function was just calling
nvmf_tgt_create_subsystem() with no other functionality.
Change-Id: I1b20887cade7496093e0b69778df30f818eeb764
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403379
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Remove the serial number from the parameters of
spdk_nvmf_construct_subsystem().
Change-Id: Ib6d394cc98fddf85fc878fe0a8c8aa0fdcddf7f4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403378
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When vhost has sent too many events and the eventq
ring is full, the very next event will be sent with
EVENTS_MISSED flag set. Virtio after processing such
event should do a full target rescan to manually detect
all changes - this implies
1) hot-attaching targets that appeared, and
2) hot-detaching those that don't respond properly.
Virtio has been doing only #1 so far.
Change-Id: Ib8be986588913ad41296dcfd6558ff705b99007c
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/402120
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Virtio response codes other than OK, BAD_TARGET
or INCORRECT_LUN indicate an intermittent device/transport
failure and don't need to be handled by each message
response handler separately.
Change-Id: Iab0b03b3c7b377d2b346344c32e5df143df528b0
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/402119
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Remove the array of allowed hosts from the parameters of
spdk_nvmf_construct_subsystem() and add the hosts individually now that
we have the capability to add them after subsystem creation.
Change-Id: I8b05e44d6a254f8d5848975e4bcfb7847e2cf4f3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403377
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Remove the array of listen addresses from the parameters of
spdk_nvmf_construct_subsystem() and add the listen addresses
individually now that we have the capability to add them after subsystem
creation.
Change-Id: If9b9e5f5ce2e6af2bddbda7c3926170f2296abdd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403376
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We must hold bdev->mutex around all QoS channel manipulations, not just
channel_count; otherwise, there are race conditions.
Change-Id: I6183aef83f4d5789bded426a1832e3faaa688363
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403367
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The helper functions were only needed when this was sent as a message,
but they are only called directly in the current code, so just move the
contents of the functions inline to their call sites.
The unregister path can also be simplified to pass the poller directly
to spdk_poller_unregister(); it already handles the case of a NULL
poller.
Change-Id: I509cf8922b53e1e616c9e976610b20061bb50066
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403364
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Trace the initiator and target name for debugging purpose.
Change-Id: I89230484072a7f12a58b4234abd1026a228f302a
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/403690
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Return NULL on resource failure (calloc) instead of
abort()'ing in static nbd function and check result
returning an errno, in that case, further up the call
chain.
Change-Id: If95f8db745fa77c76c415a1aa54c5338c270628f
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/403588
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will be used to track time used in pollers - each poller can now
indicate if it found any work to do or not.
For cases where it was obvious and the infrastructure was already in
place, existing pollers have been modified to return 0 or a positive
value to indicate whether work was done. Other pollers have been
modified to return -1 by default, indicating that the poller isn't
indicating anything about whether work was performed. This will allow
us to find un-annotated pollers easily in the future and fix them
incrementally.
Change-Id: Ifebfa56604a38434fac5c76ba7263267574ff199
Signed-off-by: Roman Sudarikov <roman.sudarikov@intel.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/391042
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There are two separate function pointer types declared in io_channel.h:
spdk_thread_fn for cross-thread messages, and spdk_poller_fn for
pollers. They currently have the same signature, but this will be
changing in an upcoming patch, so we need to fix the poller-related
functions to use the correct type (a few were using spdk_thread_fn by
mistake).
Change-Id: I0f0d8f1eea9905395125fc91e0355a49e65be99e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403598
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is a leftover from moving nvmf to a subsystem.
Change-Id: I6ad07d3c60dff29e34b92c9cf18ac451cfd00918
Fixes: 2491021f64 ("nvmf: convert nvmf_tgt into an event subsystem")
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403374
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This better matches the style in the rest of SPDK.
No functional change - this is a pure find/replace of
spdk_bdev_module_if to spdk_bdev_module. Instances of this struct will
be renamed in another patch.
Change-Id: I3f6933c8a366e625fc3a1b6401aee26ee03ba69c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403368
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Modifies behavior of spdk_trace_init() such that it returns
on failure instead of terminating with exit().
Change-Id: I0ba321cddd233008a4b19bc592728230d89a11b2
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/403357
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Return NULL on resource failure (spdk_mem_get) instead of
abort()'ing in static bdev function.
Change-Id: I0ee2ce4b7e81cf80546119e3db27c987fa912749
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/403578
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
BlobFS shutdown path needs to be investigated more with these
changes.
This reverts commit a137b9afd0.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8b04b24e178945d62db20668b9e500f278ae955b
Reviewed-on: https://review.gerrithub.io/403600
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
For any given blob, if an spdk_blob_sync_md() operation
is already in progress, queue additional spdk_blob_sync_md()
operations until the previous one completes.
This ensures proper ordering of writing metadata to
disk.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2051e8cb5b8d1a033ec1238cb4811232110aa0f4
Reviewed-on: https://review.gerrithub.io/401257
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If we are not in ffp phase, we do not need to update last_nopin
Change-Id: I289beec8437d7117b6261483c333bf5db5fbd11f
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/403166
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
In the upcoming JSON config file, CHAP parameters for discovery will
be specified simply by the value of them.
This is as same as JSON-RPC for target node but different from .INI
config file.
If CHAP parameters are specified by the value of them, the combination
of them must be checked before applied to iSCSI globals.
Change-Id: Idf663796f97581366da945abb8dc351f3975ceae
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403235
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently CHAP parameters for discovery are handled as bool but
they are defined as int. Hence change their type from int to bool
as done for target node previously.
Change-Id: I1e815946d4bdececcdd7cc873a725afbbcb98e50
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403234
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Portal, portal group, initiator group, and target node don't use fixed size
array anymore. To use the same naming rule in iSCSI subsystem and in SPDK
is helpful to understand and maintain. Current naming rule is not bad but
to use unified and compact name is prioritized at this time.
This patch changes function names as follows:
- spdk_iscsi_init_tgt_nodes() -> spdk_iscsi_parse_tgt_nodes()
- spdk_cf_add_iscsi_tgt_node() -> spdk_iscsi_parse_tgt_node()
- spdk_iscsi_portal_grp_array_create() -> spdk_iscsi_parse_portal_grps()
- spdk_iscsi_portal_grp_create_from_configfile() -> spdk_iscsi_parse_portal_grp()
- spdk_iscsi_portal_create_from_configline() -> spdk_iscsi_parse_portal()
- spdk_iscsi_portal_grp_array_destroy() -> spdk_iscsi_portal_grps_destroy()
- spdk_iscsi_init_grp_array_create() -> spdk_iscsi_parse_init_grps()
- spdk_iscsi_init_grp_create_from_configfile() -> spdk_iscsi_parse_init_grp()
- spdk_iscsi_init_grp_array_destroy() -> spdk_iscsi_init_grps_destroy()
For example "parse" is already used to explain the operation in portal_grp.c.
Hence using "parse" is familiar and not strange in iSCSI.
Change-Id: Ieff952069d39bd96b7afa1586bfff927968accc2
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403149
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Some variables of struct spdk_iscsi_globals are initialized by using
.INI config file but others are initialized without using .INI config
file.
This patch aggregates all initialization operations into a function
spdk_iscsi_initialize_iscsi_globals().
Next patch move the code to read .INI config file from
spdk_iscsi_initialize_iscsi_globals() to spdk_iscsi_parse_iscsi_globals()
to make implementation cleaner.
The purpose of the patch series is
- to separate iSCSI subsystem initialization and iSCSI subsystem
configuration, and
- to develop a new JSON-RPC by reusing the separated iSCSI subsystem
initialization.
Change-Id: I0bda0de1d8bf1ba5e4b4e5157949fd300ec9ff9d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403148
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Upcoming JSON config file will support iSCSI global params initialization.
This patch is an effort for JSON config file to reuse the current code as
much as possible.
SPDK's other libraries use options structure effectively, and hence
iSCSI library also utilizes it.
The purpose of the patch series is
- to separate iSCSI subsystem initialization and iSCSI subsystem
configuration, and
- to develop a new JSON-RPC by reusing the separated iSCSI subsystem
initialization.
Change-Id: I9936a4cac4048adaa5d69233f156887376d7cde1
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403147
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch is to add the basic support of QoS on bdev.
Including two major functionalities:
1. The QoS rate limiting algorithm:
a. New IO will be always queued first also under
the no memory condition
b. Start the QoS IO operation based on the limit
c. A poller started in each millisecond to reset
the rate limit and send new IOs down
d. The rate limit is based on the millisecond and
converted from user configurable IOsPerSecond
2. The Master Thread management:
a. Add a per bdev channel_count
b. Whenever QoS is enabled on bdev, if QoS bdev
channel is not created, create the QoS bdev
channel and assign the QoS thread
c. When new IOs coming from different channels
(threads), pass the IOs to the QoS bdev channel
through the thread event
d. When the IOs are completed from the QoS bdev
channel, pass the IOs back to its orignal
channel(thread)
e. Destroy the QoS bdev channel when it is the
last bdev channel for this bdev. Defer the
destruction if current thread is not QoS thread
Change-Id: Ie4444551d7c3c7de52f6513c9db926628796adb4
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/393136
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I94bbf1f035aca463530450811200f1f1800d6485
Fixes: 4294719ed7 ("subsystem: make subsystem declaration ...")
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403355
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: If5e16c2ac148fd4818c942e8f57b02671e76ed62
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/403153
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Currently SPDK_BDEV_MODULE_REGISTER() take many parameters. Extending it
(eg for incoming JSON configuration dump/load) is quite challenging and
error prone. As we are already here in next patches, rework this macro
to take one parameter - the pointer to struct spdk_bdev_module_if.
This patch also remove following macros:
SPDK_GET_BDEV_MODULE - this is not really needed, to find module outside
module translation unit use spdk_bdev_module_list_find()
SPDK_BDEV_MODULE_ASYNC_INIT and SPDK_BDEV_MODULE_ASYNC_FINI - replaced
by bool fields in spdk_bdev_module_if struct.
Change-Id: Ief88e023fbbaee7d5402c838dbecbdffd4dfb259
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/402883
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Don't do anything under the scene as adding/removing fields in struct
spdk_subsystem will require both macro change and C file changes.
Change-Id: I11bc0d5758edd7e0e0bd3f93e251d868cd9b1d2b
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/401850
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This allows vhost initialization to be fully handled in the event
framework subsystem.
Change-Id: Ic0ff11f3765cc553b7ca183027209fb6dd131364
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403226
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This lets us drop the basename parameter from spdk_vhost_startup(),
which is a step toward making vhost initialization happen as part of the
event subsystem instead of in the spdk_app_start() callback.
Change-Id: I4fe18c4c3f12b706e73ae74500be58f1582110fd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403225
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is required as part of our effort to build a single target app that
can run e.g. NVMe-oF and iSCSI targets in the same process.
Change-Id: Ic8426df08899070d709e3675a57f47f64c23c5eb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403218
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This can be used to force specific UUIDs for testing.
Change-Id: I40c403fd00c142552d632dd5f0fbe1ea9a6c9962
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403221
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch extracts iSCSI subsystem initialization by .INI config file
into a function spdk_iscsi_parse_iscsi_globals().
Naming rule was adopted from NVMf-tgt.
By these two patches,
iSCSI subsystem init is done in spdk_iscsi_parse_iscsi_globals().
iscsi subsystem config is done in spdk_iscsi_parse_iscsi_configuration().
The purpose of the patch series is
- to separate iSCSI subsystem initialization and iSCSI subsystem
configuration, and
- to develop a new JSON-RPC by reusing the separated iSCSI subsystem
initialization.
Change-Id: Ibafb0b62cbb0aa23dd6dd6007dad0345293e65b8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403146
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
iSCSI poll_group initialization must be completed before starting JSON-RPC.
This doesn't have any dependency to the other iSCSI subsystem
initialization and completes asynchronously. Hence thisis good to be placed
at the end of iSCSI subsystem initialization.
Besides, object creation of iSCSI configurable components started after
poll_group initialization by .INI config file is aggregated into a function
spdk_iscsi_parse_iscsi_configuration().
Naming rule was adopted from NVMf-tgt.
The purpose of the patch series is
- to separate iSCSI subsystem initialization and iSCSI subsystem
configuration, and
- to develop a new JSON-RPC by reusing the separated iSCSI subsystem
initialization.
Change-Id: I44421803268361f53840a7e47f07ce95c13d1139
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403145
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The next patch will move the location and change the callback of poll
group initialization. Besides it is probable for JSON config file to
change the callback of poll group initialization.
Passing callback as argument increases visibility and flexibility of
code.
Change-Id: Ie4bfd2c60a112bb7c697110ef0efc30a2c098dc8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403144
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Pool of iSCSI connections and related variables are initialized in
initialize_iscsi_conns().
Currently initialize_iscsi_conns() is located after configuration of
target nodes by .INI config file.
Configuration of target nodes can be done by JSON-RPC but connection
initialization must be completed before starting JSON-RPC.
iSCSI connections don't belong to iSCSI global params directly and
hence move connection initialization right after initialization of
iSCSI global params.
The purpose of the patch series is
- to separate iSCSI subsystem initialization and iSCSI subsystem
configuration, and
- to develop a new JSON-RPC by reusing the separated iSCSI subsystem
initialization.
Change-Id: I183365b84aa205790b27adf7cc1f632b932195aa
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403143
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
iSCSI subsystem have a pool for PDU, session, and task, respectively.
They belong to the struct spdk_iscsi_globals and are initialized by
using the parameters of the struct spdk_iscsi_globals.
Hence their initialization should be located just behind the setup of
parameters of the struct spdk_iscsi_globals.
The purpose of the patch series is
- to separate iSCSI subsystem initialization and iSCSI subsystem
configuration, and
- to develop a new JSON-RPC by reusing the separated iSCSI subsystem
initialization.
Change-Id: Ie39f63ee24c547dcd31a1a06d72d915e8c272864
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403142
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Object creation of portal, portal group, and initiator group can be
done by JSON-RPC.
This patch moves object creation of portal, portal group, and initiator
group right before object creation of target node.
The purpose of the patch series is
- to separate iSCSI subsystem initialization and iSCSI subsystem
configuration, and
- to develop a new JSON-RPC by reusing the separated iSCSI subsystem
initialization.
Change-Id: If78beabb478923e7c920c09b16e42d6f8aa55775
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403141
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There are four configurable components, portal, portal group, target node,
and initiator group in iSCSI.
They have a TAILQ to manage their objects, respectively.
Currently each TAILQ initialization is done together with its object
creation by .INI config file.
This patch separates TAILQ initialization from object creation for four
configurable components in iSCSI.
The purpose of the patch series is
- to separate iSCSI subsystem initialization and iSCSI subsystem
configuration, and
- to develop a new JSON-RPC by reusing the separated iSCSI subsystem
initialization.
Change-Id: Ia4ac3f06f15acef671e785904f4c687e5d189fbe
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403140
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie7a940efde885dbf0bb7c085fd17c3991dfa3341
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/403165
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Modifies behavior of spdk_app_start() and spdk_app_parse_args()
such that they return on failure instead of terminating with
exit().
Change-Id: I82566417f04e1ae2e3ca60a00c72e664db26c9e4
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/401243
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I738b4e28065797c9df7b0bc27ec0aee8c9f4f257
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402381
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds possibility to set internal xattrs on blob
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I2d0f14558e4a1af7071ee1a4f59aaf9f14bea2d9
Reviewed-on: https://review.gerrithub.io/396418
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Unit tests implemented in following patches.
This is rebased patch from https://review.gerrithub.io/#/c/396648
merged as commit c1174e6895
and reverted in 0847f27b54.
Change-Id: I3d152bf7847c83bf75149edd61564c1f393927d8
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Reviewed-on: https://review.gerrithub.io/402529
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
For some xattrs we need to know its value even if blob is in loading
state, e.g. BLOB_SNAPSHOT xattr value when blob is loading.
Change-Id: I1cd7805cf33be64cf59792f85a270e9b536e23bd
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/403062
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Ief1f809308fbde2e696c60d3ce79c0720cb3e2ff
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Reviewed-on: https://review.gerrithub.io/398934
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I22c11cdd5ab0ffdf72b27223c0c9cd7282537613
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/402667
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In addition to the lvolstore uuid, add a per-lvol uuid for bdev
identification.
The lvol uuid is stored as an xattr for each lvol blob; if an lvol blob
without a uuid xattr is encountered, the lvol bdev will not report a
uuid for now (it will be set to all zeroes, which will be treated as
no uuid available by the generic bdev layer).
Change-Id: If00221383a12d62234fc085d56e257dd48053103
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402973
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add a generic way to get a UUID from a bdev.
For now, malloc and null bdevs generate random UUIDs, and no other bdev
types report a UUID.
Change-Id: Id9608c8c1b3ce3f1783e7f74bef96d44cd5d98a7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402177
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This lets us have a common place to put definitions like the length of
the UUID string, as well as abstract away some of the API warts in
libuuid (non-const values, no size checking for uuid_unparse, etc.).
Change-Id: I80607fcd21ce57fdbb8729442fbb721bc71ccb98
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402176
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Rather than explicitly asking for time-based UUIDs, let libuuid choose
the best available UUID source (high-quality random number based if
available, or time-based if not).
Change-Id: Ic2f538890f86d3158b64f5884708439b72c373f6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402963
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We should add this state after free the io channel.
To make sure that we will not touch the wild pointer.
Change-Id: I570f649fe3ddffaea430125b40c6b6b020a05222
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/402999
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Before this patch super_blob id for blobstore was persisted
only during spdk_bs_unload. If power fail occurred after creating and
syncing blob, super_blob id was lost within blobstore.
Lvol store metadata would be lost, if proper shutdown
didn't occur in first SPDK instance run since creation of lvs.
This fix changes setting super blob to be instantly persisted
on disk in super block. Without affecting clean bit in super block.
Change-Id: I578f1fc8717e2d7968ad506fa4dead7507a5e0b4
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/398804
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The variable ntargets in the struct spdk_iscsi_globals was needed
previously because iSCSI target node was managed by a fixed size
array.
Now iSCSI target node is managed by a linked list and ntargets
doesn't take any meaningful role now.
Change-Id: I1805d7a6a6ce40efa4d18f198fbb9104bee43b26
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/402976
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Even if the value specified by user through the config file is correct,
the default value is always set to DefaultTime2Retain.
Change-Id: Ifdf44e743419813b728a1423c441df59cc90c0a1
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/402635
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Ic3a612ceed65799d16dae111db355333a1915187
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/403002
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5e636c4c9d930de0d9e6eadd453f0d17eadaf45e
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/402530
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A bdev that is claimed is not a leaf, even if it has no vbdevs exposed
currently.
Change-Id: I3b790068128890a569f83b15071ea916c54bff9b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402935
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
As for NVMeoF controller, SPDK always set volatile write cache to
present, so OS may submit FLUSH command to backend block device,
while here, return success for those block devices which can't
support FLUSH command.
Change-Id: Ib764503f1986e7e0a38a1751a91d6c11e1b78865
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/402653
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also remove the related login and full feature
function
Change-Id: Ia2d0a6617910134c889d1322b53830fe26b9e956
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/402486
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This patch will also re-export spdk_iscsi_conn_destruct
Change-Id: I7d6cbba33294c84398a919d888c8b375e901e09e
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/402485
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
iSCSI's global mutex is used in spdk_iscsi_portal_grp_create()
before it is initialized by pthread_mutex_init().
A mutex filled with zero bytes has been accepted by now but
this should be fixed.
Change-Id: I2e197bec8da2f781c8c4f6e2a2caf9924b0a4369
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/402497
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Put it in the iscsi.c
Change-Id: Ifb2843fb7c78f9ca948eac60704547b8b0635bf0
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/402484
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Automatically detect more whitespace errors.
All existing cases are fixed; only whitespace change (verify with
diff -w) except for one comment style fixup in include/spdk/nvme.h.
Change-Id: If750e54b9c8e3421ea6feda5f20184a31431631e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402360
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Currently if the application exits with some error (i.e., core
dump), the socket file is not removed. So that at next time the
RPC method can not enabled unless user manually removes the
socket file. The error of failing to start RPC is not that
obvious.
This patch introduces a lock for the reuse socket to properly
detect the only usage and handles the above error case particularly.
Refer to https://gavv.github.io/blog/unix-socket-reuse/ for the
details.
For the concern of the sockect file can be shared from different
applications, in the spdk_app_opts struct, it offers a parameter
to assign a specific socket file per application.
Change-Id: Ie2ef6af9207c468279cba5efd173fd06579ccdc7
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/396089
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I30675083dcb7dda47ac62eaf124614033ff9c587
Reviewed-on: https://review.gerrithub.io/401702
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This change wasn't correctly rebased and needs to be updated to compile
against the current blobstore.
This reverts commit c1174e6895.
Change-Id: I529608bee7323cb626d8c36dff15adc9ba24ad26
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402352
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Unit tests implemented in following patches.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ib18c9060f527bd22bfdbed74e96871a6e0551ead
Reviewed-on: https://review.gerrithub.io/396648
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Currently only thin_provisioned zeroes back_bs_dev is supported.
There was no unit tests for channel in this bs_dev, because it's never used.
However, unit tests in patch https://review.gerrithub.io/c/393935/ show that channel is wrong.
This patch passed proper spdk_io_channel to callback function.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ia288ef6c35343ce533ea3f74603e73f823a18181
Reviewed-on: https://review.gerrithub.io/400955
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch adds the QoS parameters on the bdev channel.
Change-Id: I0cb9bf9e9cdbbe61c70c4a3df4eeb8be774793a0
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/393129
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Briefly tested with SPDK target via bdevio
through both vhost-user and QEMU's virtio-pci.
vhost-blk driver is not mentioned in any doc yet.
A virtio-blk bdev can be created as following:
`construct_virtio_user_blk_bdev /tmp/virtio.0 MyVirtioBlk0 --vq-count 16`
`construct_virtio_pci_blk_bdev 0000:01:00.0 MyVirtioBlk1`
or
```
[VirtioUser0]
Path /tmp/vhost.0
Type Blk
Queues 16
[VirtioPci]
Enable Yes
```
If `Type` field is not present, the VirtioUser
section will be parsed as a SCSI one, preserving
backward compatibility.
Change-Id: I3eae9f3b90570fbb0177df4951e5eed86fe07c66
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/393056
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If this polling group is not initialized, we do not
need to destroy the polling group.
Change-Id: I5a94412d7f42b05d4a457c8652e2f465190fbe6e
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/401362
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Alters internal spdk_process_new_interface_msg() function
such that it returns a failure instead of exit()'ing.
Change-Id: I31c5dd9db43449f81dbb0f581258476a58aa8000
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/402165
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There was a bug reported by Cunyin Chang with regards to how the
cmb_current_offset was calculated when the CMB offset into the CMB BAR
is non-zero. This patch fixes this issue and also fixes the problem
that the last valid offset into the BAR *may* differ if registration
is utilized or not (due to the 2MiB alignment and length requirements
for registered memory).
Change-Id: Id08d6a5a40b828338f6a66599171cc8dd59768a3
Signed-off-by: Stephen Bates <sbates@raithlin.com>
Reviewed-on: https://review.gerrithub.io/401832
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The better location is to put this function in
the end of process_read_task_completion which can match
the the same function call in spdk_iscsi_op_scsi_read.
Change-Id: I7dbfb23e2c469e0be22e148299643a99b93c8018
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/401985
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Since we have two pollers for each iSCSI polling group,
so it could be possible that the nop_poller to set
iSCSI connection in existed or existing state.
So add a check here, which means the incoming data
is too late.
Change-Id: I94e5090b005c35c9eb5d7eedbd7acdae67327f94
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/402039
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Purpose: To make the logic clear.
Change-Id: I6176f359a23816b316e92b63ee2e5d5175ae7e7b
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/401772
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows listening on the same port on IPv4 and IPv6 simultaneously;
otherwise, the second listen call would fail with an "address in use"
error.
Change-Id: I75010a2d1ec6559653e0bda40517dc13d8f5b9a5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/401718
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
blobfs and lvol can now use this to automatically iterate
all existing blobs during spdk_bs_load. Changes to blobfs
and lvol will come in future patches.
This will also be used in some upcoming patches which need
to iterate through blobs during load to determine
snapshot/clone relationships.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic7c5fac4535ceaa926217a105dda532517e3e251
Reviewed-on: https://review.gerrithub.io/400177
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Currently, this just reports the EUI64 and NGUID types, which are
already available in the Identify Namespace data, but this sets up the
framework for reporting a Namespace UUID (which doesn't have a
corresponding field in Identify Namespace) in the future.
Change-Id: I758e6d402ff874d65eca3f1db98d92c1a3f7a11f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/400893
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch is used to implement the sock fd event group
polling mechanism if there are incoming data from network
(read event in SPDK iSCSI target side) , thus we can awake
many connections one time, and it can reduce the system call
overhead.
Change-Id: I76c26a89ef9365d7e1ccec616985e7435253896b
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/399796
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This simplifies the code and eliminates the possibility of accidentally
inserting other items in between a key and its value.
Change-Id: Ic3bf7d0a85e9475171fe00cbcac6fe3ede731e69
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/401046
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Ctrlrs list maintanined by the subsystem structure should be operated
by the thread which creates the subsystem. And this will make the
operations correct.
Change-Id: I7f881a77b1846658b3acd4270b74f86816e87803
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/401541
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Purpose: To make the nvmf subsystem management correct
in next patch.
Change-Id: Ie5433f3a7d47f05c5949dfc723aba73465623f88
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/401540
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Finish the sequence first, before calling _spdk_bs_free().
Otherwise synchronous bs_devs (like we use in the unit
tests) cause the sequence memory to get freed via
_spdk_bs_free() and then we try to finish the sequence.
This eliminates the need for g_scheduler_delay and
_bs_flush_scheduler() in the blob unit tests. But don't
remove them - they will be useful in upcoming unit tests
for queued persist operations.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I09aac3ae4d3a56ff8e04a5b822fcd6746f13afc3
Reviewed-on: https://review.gerrithub.io/401267
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
No functional change - this just separates out the
code that creates the persist ctx from the code that
actually performs the persist operation.
Part of series to enable queuing persist operations -
this will be useful for starting a previously queued
persist operation.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie1966ff2a477f3075c36f90560010d036658f803
Reviewed-on: https://review.gerrithub.io/401255
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaef32731b05a53ac0707524d78086eedc89d6af6
Reviewed-on: https://review.gerrithub.io/401254
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I096fb24dd2fe2fc4dd97d80c957c328d960fb867
Reviewed-on: https://review.gerrithub.io/401073
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
spdk_blob_close() and spdk_blob_sync_md() currently do their
own CLEAN state. To consolidate the state checking code,
have both functions rely on the check in _spdk_blob_persist()
instead.
This will reduce code but more importantly is needed for
some upcoming changes for queuing persist operations.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I38118624b4fad6f18c4b7466d9ddfa0915c3fce0
Reviewed-on: https://review.gerrithub.io/401065
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
These are common functions that can be called from
any function that reads or modifies a blob's metadata to
perform necessary asserts.
This will also fix several places where blob metadata
functions were asserting the calling thread context,
but not the current state of the blob.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9e16c082a27c439311f8ff214335adadfa715497
Reviewed-on: https://review.gerrithub.io/401053
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
All metadata operations are now done on the metadata
thread, so we no longer have to worry about one thread
updating in-memory metadata structures while another
thread is transferring the in-memory structures to
on-disk structures.
This does not protect against multiple sync operations
outstanding at once - that will be coming in an
upcoming path.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibf33edf4d41d867c96a38df017737e9ceb87fa58
Reviewed-on: https://review.gerrithub.io/401056
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The md (metadata) thread is always the thread that
initialize/loaded the blobstore. Metadata operations may
only be performed from this thread. This patch adds some
more asserts in metadata functions that were previously
missed.
While here, also update some of the blobstore documentation
related to this.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5cafdb3ba402ceb6c3ccb6fdd9d36e7768f59f39
Reviewed-on: https://review.gerrithub.io/400885
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Unfortunatly not all bdevs produce its configuration in responce to
get_bdevs RPC call (eg nvme is producing tons of additional
informations). To not breake any existing scripts rename
'dump_config_json' to 'dump_info_json' instead of reworking those
callbacks. Next patches will introduce real 'dump_config_json' handlers
and API
Change-Id: If9c1a4ab864791b24a5f7d022e970cd65990ffc0
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/401216
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The iSCSI connection does not have the poller anymore, so
change the name
Change-Id: I534f72998c6bcc73ad9caf5e8f700751acd95c99
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/401372
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic2bae1c750d2c9b35bded8ed96c3b84832690ce2
Reviewed-on: https://review.gerrithub.io/401479
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Three new RPC methods are added to allow modification of the NVMe-oF
subsystem allowed host whitelist at runtime:
- nvmf_subsystem_add_host
- nvmf_subsystem_remove_host
- nvmf_subsystem_allow_any_host
Change-Id: I5c98658f949dad013165c04497cca49867022ba0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/396063
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Implement a poor approximation of reset handling for the RBD bdev so it
can pass the bdevio tests.
This should be replaced with a solution similar to bdev_aio, which waits
for all outstanding I/O to return before completing the reset. However,
this should ideally be handled by the generic bdev layer rather than in
each individual module.
Change-Id: I1be2bf90875e23e05efdebb003e5412f3fc43793
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/401273
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously, the RBD bdev only supported a single iovec entry, which is
not sufficient for the bdev API.
Change-Id: Ic18257bae0363b9c01e091547e5b41bae0a21e9a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/401259
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
During converting type of CHAP params of target from int to bool
for JSON, changed names of them to be consistent with others.
In this patch, adjust variable name of struct to of JSON.
Change-Id: I1ccbfa11d57479dc55680835eb80e111bd24d9a3
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/400928
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is a TODO from long ago. Complete this while adjusting dump()
and construct() format of target.
Besides names of variables and parameters about CHAP are not unified
between JSON-RPC and SPDK internal. JSON-RPC's wording looks better
and adjust SPDK internal to JSON-RPC.
Change-Id: I89bcd1ce13a11f7d63a62d51ef094dd302186d37
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/400201
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is a TODO from long ago. Complete this while adjusting dump()
and construct() format of target.
Change-Id: I44348ec404cae8882086a1a71a65914c9bafccc3
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/400202
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds a iSCSI poll group for each core,
thus we can poll a group of connections instead of one
by one on each core.
Change-Id: I9cd82c8c0f7f6e7b3ee34034339638199bfca5da
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/399565
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
These new names are much more clear and are aligned with other
functions such as spdk_blob_close.
Keep the old names around for now but deprecate them. We will
remove them in next release.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idc60fd0b19fa2a8b0247a1f5835774d342e721f9
Reviewed-on: https://review.gerrithub.io/400884
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is needed for an upcoming change which will
prevent metadata functions from being called on
threads other than the metadata thread. Without
this change, there was no way for this function
to return an error if it was called from the wrong
thread.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I67e591140194ff6ad250878168f6b166a1ff2282
Reviewed-on: https://review.gerrithub.io/400883
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
There was some thinking that we would need to allocate
I/O channels on a per-blob basis to handle dynamic
resizing during I/O. Making spdk_blob an opaque handle,
with the existing spdk_blob structure renamed to
spdk_blob_data was a first step towards making that
happen. But more recent work on blobstore has
simplified the resizing approach, so this spdk_blob_data
is no longer needed. So revert it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I22e07008faceb70649ee560176ebe5e014d5f1a3
Reviewed-on: https://review.gerrithub.io/400881
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This will let us e.g. read device blocksize in the
upcoming vhost-blk initiator. All the public API
was already there - we've been using it for
virtio-pci. Now we're making use of it for vhost-user
as well.
Change-Id: I39eab820bb9bbff59c8b8efa79cc97d2ec7806fd
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/398828
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I02ca8aed1bba1922a69a9b22bca22bce06e9c55f
Signed-off-by: Pan Liu <liupan1111@gmail.com>
Reviewed-on: https://review.gerrithub.io/399536
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The default method for building DPDK now is via the submodule, and users
that explicitly want to link a different DPDK need to specify its path
during configure. Therefore, nothing should be depending on these
hard-coded paths, and we can remove them.
Change-Id: Ic7d70ef10c46f9711691fb804f7dc854e05f7ed1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/401075
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
With recent update to bdev.c for its io_device_register
handle for new bdevs, several modules can now just use
their respective structures defining each bdev rather
than picking a more complicated one.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic8ea24c64a782e54d18b6241e36f56dbbbb5f1e7
Reviewed-on: https://review.gerrithub.io/400555
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Many bdev modules create their own bdev structure
with spdk_bdev as the first member. bdev.c currently
uses the spdk_bdev pointer as its io_device handle,
forcing bdev modules to pick something different.
Change this to use the spdk_bdev pointer + 1 bytes
as its io_device handle. The actual handle does not
really matter - it just needs to be unique. This will
simplify bdev module development.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8b6da3be9c16c87bc7a393c3a2221c6bae26e0a5
Reviewed-on: https://review.gerrithub.io/400554
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This can be enabled with -t nvme in debug builds.
Change-Id: I4392d0a7decd65cc567fdf6fd56cac6db0424cd8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/401052
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function returns uint64_t, but the existing code was returning
the bool 'false' (which is also 0, so there is no functional change).
Change-Id: I546b15974c2d9e4107efe262950e3eb5613e0e9f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/401051
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Unify several similar functions checking for a buffer of all zero bytes
into the util library.
Change-Id: Idfbeffa22add34ac9ed1bd75ee27d6bd8b188940
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/400892
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Supporting sock_groups with multiple spdk_net_impls
is a bit tricky. We cannot just allocate space off
the end of spdk_sock_group for the implementation-specific
details - we need separate allocations for each
spdk_net_impl so that one spdk_sock_group can handle
spdk_socks from multiple spdk_net_impls.
Unit tests will come in upcoming patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1570862a044192d30a79224f6029bf3d8157ce80
Reviewed-on: https://review.gerrithub.io/400528
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
JSON format of bdev_name_id_pair is different between
construct_target_node() and get_target_nodes().
construct_target_nodes() uses the following format:
"lun_ids": [
1
],
"bdev_names": [
"Malloc0"
]
get_target_nodes() uses the following format:
"luns": [
{
"lun_id": 0,
"bdev_name": "lvs_1/lbd_1"
},
]
The second format is better than the first format. Hence unify to
the second format.
Change-Id: If097e41ada0f2fe3754691cee0a0774db97c4ebb
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/399993
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For the following JSON-RPC:
1) get_target_nodes
2) construct_target_node
3) add_pg_ig_maps
4) delete_pg_ig_maps
JSON format is not unified yet.
1) uses the following:
"pg_ig_maps": [
{
"ig_tag": 1,
"pg_tag": 1
}
2), 3), and 4) use the following:
"ig_tags": [
1
],
"pg_tags": [
1
],
the first format is better than the second format. Hence unify to
the first format.
Change-Id: I6cc19115001b9c9ba9db5c87db1def7c0b3bd80c
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/400203
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The list of net impls doesn't need to be visible outside of sock.c.
Change-Id: I8def009acb82e5cd6f1e13e797079c1a94e3c7da
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/400864
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The CFLAGS in these files add unneeded include directories.
Change-Id: I742a75b7ce5bff2f1dfd6f92d99ebc99a1936666
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/400862
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_sock_group_impl represents the implementation of
a sock group for a given spdk_net_impl (posix, vpp, etc.)
This extra abstraction is required for enabling
spdk_sock_groups with sockets associated with different
spdk_net_impls.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7a380cc62c59bdac98996faf0387550c234165a0
Reviewed-on: https://review.gerrithub.io/400527
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Also convert the primary spdk_sock/spdk_sock_group
routines to use the spdk_net_impl abstraction
instead of calling the posix routines directly.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6ae8f4aae619f326f28c40f28a387ada1b263e27
Reviewed-on: https://review.gerrithub.io/400335
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is the framework for providing multiple implementations
of TCP sockets in a single application. This patch just
adds the framework - upcoming patches will convert the
existing POSIX implementation to use this framework.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I07951e71f344dfe7689c818a13d7e7113c826643
Reviewed-on: https://review.gerrithub.io/400334
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This moves the POSIX specific pieces (namely the
file descriptor) out of the common sock/sock_group
structures and into posix-specific structures.
Note that the first member of these new structures
is the respective base structure - which allows for
simple casting between the generic and implementation-
specific structure types.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie80800e66b792627fc9dc056cbdd1fd8991f0b22
Reviewed-on: https://review.gerrithub.io/400333
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Have the main spdk_sock_group_poll_count routine
just pass an array of sock pointers to the posix
implementation function. Then the posix implementation
can just fill out which spdk_socks have data and let
the caller do the callback routines.
This moves a fair bit of code from the posix implementation
to the common code, which will simplify the upcoming
VPP implementation.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I547821ce9875777448f433cae59e316a45c259f6
Reviewed-on: https://review.gerrithub.io/400332
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Parts of the close code (for both sock and sock_group)
is generic and will apply to every net implementation
(POSIX, VPP, etc.) - so move that generic code now.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I50b5b272b6af219a516c18c41eee5a2e00bf034d
Reviewed-on: https://review.gerrithub.io/400330
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is a step towards abstracting the posix implementations
of these functions behind an upcoming net_implementation
abstraction. This will allow for use of multiple TCP
stacks in parallel.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1ed7d8ae3f1a585ac7a503335c958ebb68fd057c
Reviewed-on: https://review.gerrithub.io/400329
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In early days of SPDK, there was an experimental userspace
TCP stack called libuns. The SPDK iSCSI target supported
using either the default POSIX/kernel TCP stack or this
libuns TCP stack.
libuns is no longer in use, but work has started on
supporting the FD.io VPP TCP userspace stack. Abstractions
are being put in place to allow *both* the POSIX and VPP
stacks simultaneously.
So remove the concept of a "default" net_framework that is
defined with weak symbols that can be overridden by another
object file. While here, also remove the "clear_socket_association"
concept which was specific to libuns.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8a0385ca5ae113e34a637f835d8d69f8d510433e
Reviewed-on: https://review.gerrithub.io/400328
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This avoids recursion in the case where the remove_cb
immediately closes its open descriptor, resulting in
a second call to spdk_bdev_unregister without unwinding
first.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I093786f13bb2953b8f08888a668a045581a9f81c
Reviewed-on: https://review.gerrithub.io/400305
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_vhost_dev_has_feature() is internal function so we can move it's
declaration to header file. This remove function call overhead.
Change-Id: I1704e8279cd6720177047a1ae8818f68982998db
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/400241
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
adding nvme_ctrlr_destruct_finish because nvme_transport_ctrlr_destruct may
use a destroyed mutex.
nvme_ctrlr_destruct() free "ctrlr_lock" and after that call
nvme_transport_ctrlr_destruct()->nvme_pcie_ctrlr_destruct()(with pci)->
nvme_ctrlr_proc_get_devhandle()->nvme_robust_mutex_lock(&ctrlr->ctrlr_lock);
Change-Id: I55714ea9097d2c9d844a00b5a88fa2d51a3f4469
Signed-off-by: Ehud Naim <ehudn@marvell.com>
Reviewed-on: https://review.gerrithub.io/399605
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add optional parameters to namespace creation to let the user pick the
namespace globally unique identifier and EUI-64.
Change-Id: Ia3eebaf22f8a64733a00a83f90cafb4977c2d07a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/399531
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ice343afdc84c2a11cd9026d128a35f7a62aa7125
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Reviewed-on: https://review.gerrithub.io/398933
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This will allow more parameters to be added to
spdk_nvmf_subsystem_add_ns() without breaking API/ABI compatibility
later.
Change-Id: I6b2f58f1a2d5fcd4c754830cbd4713dc461a31fc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/399519
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The subsystem->ns array may be resized with realloc(), so old ns
pointers can become invalid.
To fix this, allocate each ns as a separate object, and change the
subsystem->ns[] array to point to the namespaces rather than containing
them.
Change-Id: I873502fa90cf840e4eaa9b1abd94a95afe0f737f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/399726
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This reduces some code duplication and ensures all
successful load operations (whether or not it included
recovery after power fail) through the same function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia463ce6ebe976ab2420525d86962e8fe54ad04d7
Reviewed-on: https://review.gerrithub.io/400164
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch is a preparation to match response of dump with request
of construct (load).
Change-Id: I08d0e860ecd842fabf2bbea0b888a60ffd51b055
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/399992
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This patch is used to solve
https://github.com/spdk/spdk/issues/235
With multiple core bining for NVMe-oF target,
the qpairs which belonging to the same ctrlr may
be scheduled to different cores. Thus there is
resource contention to access the struct spdk_nvmf_ctrlr.
And we put the thread info in polling group. Morever,
we introduce an admin_qpair in ctrlr. Since admin_qpair will
always be created at first and freed at last, to reference
this pointer is safe.
Change-Id: I12ac26f9e65b4ed8e48687750046455af0e3be1d
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/398904
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Adding new initiator to an existing initiator group to allow login
will be usual. This patch support the following JSON-RPC commands:
- add_initiators_to_initiator_group
- delete_initiators_from_initiator_group
Both initiator's name and netmask are optional but already added
name or netmask cannot be added.
Test code is added too.
Change-Id: Ic101210b9d00c2b36e37ece23fcba8cfe8e44eb8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/398361
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Patch 808a2b05 [1] fixed overflow of avail entries count,
also fixing indirect descriptors support. Without indirect
descriptors, we usually didn't manage to fill entire queue
- there were always a couple of descriptors left. A couple,
but not enough to form a vhost-scsi descriptor. Indirect
descriptors, however, are 1-descriptor long. They have higher
possibility to fill entire avail queue, and that's why they
used to fail more often. But we can safely reenable them now.
[1] 808a2b05 ("vhost: fix overflow of avail entries count")
Change-Id: Idec8568cdfc1255fb578e5d18f5c476a4c034d2d
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/396805
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reallocate the send buffer if more data is written by the RPC handler
than currently fits in the buffer.
Change-Id: I590dd173b843aba48c768adfafaf87e4b47bcc19
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/399925
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch is used to solve
https://github.com/spdk/spdk/issues/235
in the later patch.
Change-Id: I8ef6d3effbff7a6b27e82c397969687d0000542b
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/399349
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The cpuset API is const-aware, so we can safely
return const cpuset here. This will simplify
future usages of this function - for now it remains
unused.
Change-Id: If849ed49056a54035fb7a6eccde84121630f9974
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/399457
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously, the maximum core value was cached in a static variable, but
this isn't safe if multiple threads are calling at the same time.
Iterating over all core numbers is not very expensive, so just
recalculate the value for every call.
Change-Id: I4fab072f4a96ecc8801e1db293b3921a6f1534f9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/399930
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This doesn't really fix anything as rte_vhost
logging functions are extremely poorly designed
and do smp_wmb() by themselves - but only if
logging is enabled...
Let's move the barrier in our vhost.c. This
doesn't change any behavior, but makes the code
more readable. It surely looked weird to update
the ring, log it, and then do smp_wmb().
Change-Id: I90827b14292b60bd5641a48d546e7249a0496a4b
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/398326
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This feature is not particularly useful for storage.
It forces us to read additional vq memory on each
I/O completion and that's quite expensive.
Quoting VIRTIO 1.0:
```
VIRTIO_F_NOTIFY_ON_EMPTY (24)
If this feature has been negotiated by driver, the device MUST issue an
interrupt if the device runs out of available descriptors on a
virtqueue, even though interrupts are suppressed using the
VIRTQ_AVAIL_F_NO_INTERRUPT flag or the used_event field.
```
Later on:
```
Note: An example of a driver using this feature is the legacy networking
driver: it doesn’t need to know every time a packet is transmitted, but
it does need to free the transmitted packets a finite time after they
are transmitted. It can avoid using a timer if the device interrupts it
when all the packets are transmitted.
```
Change-Id: I7f53293bf811a4cd5ae8e42e18f35042ea6f4ba8
Suggested-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/398325
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is required only for event index,
which we don't support for now. The whole
NOTIFY_ON_EMPTY feature is about to be removed
soon. See subsequent patches for details. If
necessary, this should be re-implemented in a
different way.
Change-Id: Idd0c1ab929eef46e692834ffdc62472fa0f6fb74
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/398324
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Drop max vhost initiators limitation in SPDK (64).
We're still limited by rte_vhost limits, but
they're set to 1024 at the moment.
Change-Id: Ia1ad25665d6e798bc22709cdd43b72d60f1f4cf0
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/389811
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For now, this provides common abstraction for Linux epoll
and FreeBSD kqueue. It also provides the basis for future
changes where alternate userspace TCP stacks have their own
mechanism for polling a group of descriptors.
While here, remove old epoll/kqueue code in iscsi/conn.c that
was commented out when the iSCSI idle connection code was
recently removed - we now have a real implementation of it
in sock.c so the original code is no longer needed as a
reference.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I664ae32a5ff4d37711b7f534149eb0eb35942335
Reviewed-on: https://review.gerrithub.io/398969
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Patch adds internal version of xattr functions to allow
operations on internal xattrs, which are not visible to
upper layers.
When there is at least one internal xattr set, also
SPDK_BLOB_INTERNAL_XATTR flag is set in invalid_flags to prevent
loading this blob in previous spdk versions.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Iec918ec858f069f7cd9f36d5e8f0495ffa4a42d8
Reviewed-on: https://review.gerrithub.io/395122
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I2a3c7a272dc08be5a5ecb4339622816482c4cbb0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Stephen Bates <sbates@raithlin.com>
Reviewed-on: https://review.gerrithub.io/397036
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Enable address translation for I/O buffers within the controller memory
buffer region by registering the CMB using spdk_mem_register().
Change-Id: I44829757ad15fbc3ea96fa494b9fb32dd67a7138
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Stephen Bates <sbates@raithlin.com>
Reviewed-on: https://review.gerrithub.io/397035
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Add a new virtual to physical (vtophys) method for
spdk_vtophys_notify() that works for PCI memory (namely NVMe CMBs and
PMRs). This new method searches all the BARs on all the detected PCI
devices to see if the vaddr resides inside any of them.
Change-Id: I68afbeffd958cf40c1e8652e13da5531811b522b
Signed-off-by: Stephen Bates <sbates@raithlin.com>
Reviewed-on: https://review.gerrithub.io/398872
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This must've been overlooked in patch 601bcbcf.
Fixes: 601bcbcf66 ("util: extend cpumask to hold more than 64 cpus")
Change-Id: Ia7e06fcacba5cd99770b81542678550e9fbc3ca2
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/399455
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reason: In spdk_nvmf_subsystem_destroy, we call
spdk_nvmf_ctrlr_destruct(ctrlr), and this function
will still use the transport, so definitely, it is
a defect(reproduced in my platform).
So we need to defer freeing the transport resource.
Change-Id: I3eee2a29c223e2759a623604485af6f081746581
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/399368
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This internal function was now being used in one
place only. Inlined it so there's less code.
Change-Id: Ide52494d0e0f9563ce35ef7bf9166f62734a8309
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/399440
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added vdev->id field and refactored the hot
vhost external event code operating on
g_spdk_vhost_devices array, so that we will
be able to switch from that array to a linked
list with unlimited capacity more easily.
This patch does not change any functionality
on its own.
We would very willingly reuse vdev->vid here,
but it's available only on devices with active
connections.
Change-Id: Ife911a6ca1531aade374b99ef4502cf77f691fa2
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/389071
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This provides an abstraction layer around TCP
sockets. Previously we just used fd integers, but
we don't want to be tied to integers for alternative
userspace TCP stacks.
Future patches will do more work to enable multiple
implementations of this abstraction. For now, just
get the abstraction in place for POSIX sockets and
make all of the iSCSI changes associated with it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9a825e9e02eb6927c8702d205665c626f57b3771
Reviewed-on: https://review.gerrithub.io/398861
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Doing a manual vhost module fini followed
by an spdk_app_stop is wrong, as the app_stop
will trigger the vhost module fini again.
This will potentially free the g_num_ctrlrs
twice. Doing just spdk_app_stop is enough.
Fixes#238
Fixes: 3fb4bc717b ("vhost: move app fini to the vhost subsystem")
Change-Id: I70f886f6792ffc5c499a8d8cb0b6ab01855f7e9b
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/399129
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
QEMU overrides this value anyway, but other
virtio implementation may not. Setting
blkcfg->num_queues to its target value
won't break anything, and will help out
SPDK virtio-blk driver implementation.
For equivalent field in virtio-scsi, the
Virtio 1.0 spec says:
```
num_queues
is the total number of request virtqueues exposed by the device. The
driver MAY use only one request queue, or it can use more to achieve
better performance.
```
Multiqueue for virtio-blk is oficially still
unsupported, so the blkcfg->num_queues remains
undocumented. Let's implement it adequately
to the virtio-scsi spec.
Change-Id: Ief520385997bb7e745ed17501a972c55955346d2
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/399121
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
New vhost user messages GET_CONFIG/SET_CONFIG can be used for
vhost-blk for the purpose to get configuration parameter such
as: Capacity and block size. This commit enable this feature,
users don't need to append capacity any more when started
QEMU. Also event notifier is added for the purpose to change
capacity of block device while QEMU is running.
Also re-enable the vhost-blk tests.
Change-Id: I06ef697984eeea3abbbd655bdcaccaa3b7aa72d7
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/386546
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
No functional change - this just reduces an upcoming
patch that will make further changes to this function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic186f315b09ebadfba6120a70fac03ebb9beaffb
Reviewed-on: https://review.gerrithub.io/398856
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
The socket-related code was already broken out into
lib/net/sock.c, so break out the header portions
from include/spdk/net.h into its own sock.h.
This prepares for some upcoming changes in how
TCP sockets are abstracted, to enable alternative
userspace TCP stack implementations to be used with
SPDK.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I40b162e72ea80c235b49f10b17c2085fcfb385d4
Reviewed-on: https://review.gerrithub.io/398851
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I53ffdd061ba068070f66a752780229ecfe53e737
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/398688
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Don't allow a duplicate listener to be added to a subsystem.
Change-Id: I1a5f2ae09146a31859921430fb716a36d7f2048e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/398652
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The type of a queue is purely a function of its queue ID.
Add a helper function, spdk_nvmf_qpair_is_admin_queue(), to make the
logic more obvious (akin to nvme_qpair_is_admin_queue() in the NVMe
library).
Change-Id: I7cf5a82d1e3dc50834cc2ff03f5f88c5719c6952
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/398663
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The kernel vhost target enables notifying after processing
each interrupt in a following manner.
* unset NO_NOTIFY flag
* mb()
* check avail ring for slipped requests
And we do the following after issuing each I/O.
* update avail ring
* check NO_NOTIFY
If NO_NOTIFY check is reordered and read first, we might read
old `true` value, and avail ring might be updated after the
kernel has already done its check. This easily leads to deadlock.
Change-Id: I6bb4490775dfed6fb2987e97c39b713054ae26ad
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/396499
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
These didn't make much sense anyway.
Removed them so there's less code
Change-Id: I3247c640b13e5847b5f6d822072b63cad269ac8c
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/398467
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Id1e2a7da0db319c4d43988ec4991462fc956dde2
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/398542
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tree-wide cleanup of all instances of printf()-style functions where a
format string contains a space before a newline character.
Change-Id: Ib5b5861e97bed9e9d62db03875547e3f771f4769
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/397031
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
This section was deprecated in the previous release, and its removal
was planned for v18.04.
Users may configure the RPC listen address via the command-line '-r'
parameter.
Change-Id: Ic714417b87d422492b8742852c16983eb61793c2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/398239
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch adds two internal functions for the channel
create and destroy.
Change-Id: I3c5ca7a0633e5a5b3f95a36ed03f2b4cb4792e4f
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/395677
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In the different cases to creat a bdev channel, added
a common cleanup function to destroy the resource.
The same function is also called at the bdev channel
destruction.
Change-Id: I81b60cab9df3a8975b0a9982482c9d27899d8a79
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/398351
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This field was only required to check
if we can safely upcast vdev object.
We can just as well check vdev->backend
instead. The vdev->type is not needed here.
Change-Id: I525350957406d4299151e0557b9025ca7bea5371
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/396584
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When a target is removed, spdk_scsi_dev_destruct
removes its luns, consequently closing bdev descriptors
and in vhost case - triggering target hotremove again.
This doesn't really have any negative consequences, as
the second hotremove just fails silently. But let's
cleanup this for sanity.
Change-Id: I47c76814696b49905b9fb00667e9529db3f58c12
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/396575
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Instead of:
* spdk_vhost_scsi_dev_remove(vdev)
* spdk_vhost_blk_dev_remove(vdev)
we now have
* spdk_vhost_dev_remove(vdev)
All the logic is already handled internally. This patch only
changes the API. Also, previous vhost_dev_construct()/remove()
functions have been renamed to vhost_dev_register()/unregister()
because that's what they really do.
Change-Id: I7dd0d77bc5b633bec075e0a71345ddbed62697b4
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/396574
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
We already have a vhost subsystem and have to do
its fini anyway, so let's remove application fini.
Technically, any SPDK app can use vhost library
and create vhost devices, so we need to delete them
on shutdown in all cases - in module fini.
Change-Id: I013b45b4e73fd19288b9c10bc995dc24894ecf35
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/396573
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Checking uniqueness of initiator group is done without mutex and
before register/unregister. This is not thread-safe.
This patch is a preparation to dynamic addition of initiator
information to existing initiator groups.
Change-Id: I44f48c857210522eee70d14bc3735ec73b0c5c6f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/397032
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Orderings of portal group create operation are diferrent between
config file and JSON-RPC. Unification is necessary for correct
concurrency control and the global accept poller like NVMf-tgt.
Hence unify the ordering of operations in this patch.
Common ordering of portal group create operation between configuration
file and JSON-RPC after this patch is the following:
- create a portal group
- create portals
- add the portals to the portal group
- open the portals of the portal group
- add the portal group to the global portal group list
After this patch, the gap between listening socket and accepting socket
will be increased a little when portals groups are creted by config file.
However this will cause no issue because of the TCP backlog and resend
mechanism.
Besides, necessary concurrency control is added and minor refactoring
is done.
About portal group delete operation, orderings of application shutdown
and JSON-RPC are already unified.
Change-Id: I1db7ef4400388127134d7734c68e138a4573b734
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/396848
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Checking uniqueness of portal group is done without mutex and
before register/unregister. This is not thread-safe.
Hence this patch is added to ensure PG uniqueness.
A little related refactoring is also done.
Change-Id: Iaa3b5e380f2be5cfdaa2d69f9f2763c98954b0c3
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/396847
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Network portal must be unique globally but mutex is not added yet.
This patch is added to ensure it.
Change-Id: I3cdd85fd524b0da767d3cd83022e0637f3a32bc9
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/396846
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
virtio_dev_get_status may result in an MMIO read,
which is quite expensive. Removed it to improve
performance on debug builds.
Change-Id: Ibe2d13ad381f02f8d258d630283c14ce20b7a340
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/398468
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This removes PDU flushing from the main connection poller -
all PDU flushing is now done inline when the PDU is completed,
or from the context of the new flush poller.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I703cb451d4b548e7f75892e31a7927b511fb4f55
Reviewed-on: https://review.gerrithub.io/395543
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I39152be9653316a24135cde497662cfbc8f68e3a
Reviewed-on: https://review.gerrithub.io/395523
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Previously there was no way to get and verify that ctxt
in bdev was actually an lvol.
This will be used in rpc calls for vbdev_lvol.
Change-Id: I01c50487b740f5bb858dc50e609f023c8b4101ad
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/398178
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I8b570802b05b8e03802d3c2b68a1e7644ea548ac
Reviewed-on: https://review.gerrithub.io/396572
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I277f7288427788e7a107b143331753fd5b23f16f
Reviewed-on: https://review.gerrithub.io/396571
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This change will allow reusing this structure for both internal
and external xattrs as well as in functions having optional xattr,
but missing other options (i.e. snapshot, clone implemented in next patches)
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ia6619a75efa0a100168a6f8317be274823af04ab
Reviewed-on: https://review.gerrithub.io/396417
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Icba20351c9ca76397393064b41013c527084853e
Reviewed-on: https://review.gerrithub.io/396385
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Add a check when adding transport in the poll group.
If already there, just return.
The poll_group_add_transport operation can be called
at the poll group creation and target listen both.
Change-Id: I655d6fa97cafdc11fa23d199bdfe31350b920ca4
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/395039
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ib3507a9e69b210cbd173c88d166025d4579e0149
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/397602
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For thin provisioned blobs we allocate dma memory
required for copying cluster from backing device.
When cluster size is too big dma allocation may fail
silently (only IO error).
Use PRIu32 to print out the cluster size, and while
here, fix two other places that were using %d to print
cluster size instead of PRIu32.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I098b1a58aee2f0d3f4ead7aa326ecdb63a5b53d8
Reviewed-on: https://review.gerrithub.io/397563
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
After the renaming of json_internal.h to utf.h, it doesn't make sense
for utf.h to include spdk/json.h.
Move the #include "spdk/json.h" to the JSON library implementation
files and remove it from utf.h.
Change-Id: I36092524c9b982fd2e931faf1b7c5d1d6a6c80c0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/397603
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
The spdk_json_decode_array() function previously tried to check whether
the array would fit into the provided number of output elements
(max_size) before decoding; however, the check was incorrectly comparing
the total number of nested JSON values in the array rather than just the
count of top-level array elements.
Rather than doing the check up front (which can't be done without
modifying the way array lengths are stored in spdk_json_value), just
check if we have reached the end of the 'out' array on each iteration of
the decoding loop.
Fixes GitHub issue #232.
Change-Id: I4d7ce4be022bdf5f726654d0d96277b9d63bd350
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/397591
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
New optional argument added to get_lvol_stores RPC.
If lvol store name or uuid is provided, details
for this single lvol store is displayed.
It follows similar logic as in get_bdevs or get_nbd_disks.
Change-Id: I11e71d98f3cde869addf5cedeb4f33e5cebf53ea
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/395126
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I154cea95996b7ad208a9101542afd8c4ea774985
Reviewed-on: https://review.gerrithub.io/397116
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is no need to nest requests inside eachother.
This patch removes those instances in lvol create
error path.
Change-Id: Ieffcbb44957ad2aa1ac59dd41d2aec81c4edeeb3
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/396939
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ie6a651d0238d09729e28d5456a84ba090faeb465
Reviewed-on: https://review.gerrithub.io/391568
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I3c7d2096f549a88b4a9884c0026d15d3bcd8dc67
Reviewed-on: https://review.gerrithub.io/396387
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ibc9609ad36188006e9454e5c799bccd8a92d7991
Reviewed-on: https://review.gerrithub.io/391422
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will be useful for backing thin provisioned
blobs in the future.
Change-Id: I78cf8cda39e8dff42da69b79ed460797d7494af1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/397043
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds support for live migration for vhost-scsi and vhost-blk
backends.
Change-Id: Ibfc8a713dbba14ba8cb38377a71e28fd340b1487
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/394203
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
QEMU always set offset to 0 but for sanity we should take the offset
into account.
Change-Id: I36213cd8fbeb85862b6de59c60bd6bcee7f9d1b2
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/395740
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Some messages like SET_FEATURES, SET_VRING_ADDR etc will change internal
state of VQ or device. To prevent race vs thread polling those queues
stop the device.
Change-Id: I15caf9da0decbaa660e9773c93d45ff148e5e9a8
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/395739
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
See comment in vhost.c file for more details why this fix is needed.
Change-Id: I782119768fb200ad36f9253e704cc08a3be36ae6
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/395514
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Modified include/spdk/bdev.h and include/spdk_internal/bdev.h
add data members to capture statistics information. Modified
lib/bdev/bdev.c to calculate read/write latency.
Change-Id: Idcd55dd2e88c4b308e016f16ced53720256c79e3
Signed-off-by: Isaac Otsiabah <iotsiabah@us.fujitsu.com>
Reviewed-on: https://review.gerrithub.io/390654
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This will be needed for thin provisioning, since a write
I/O may result in needing to insert a cluster into the
blob and that write I/O may not have been performed
on the metadata thread.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I84b0cb6e7af87b1f9c6cab4e2c24fa26b12e2c06
Reviewed-on: https://review.gerrithub.io/396737
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ia165c3f033658adc86c8993a2a32783921ab1832
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/396494
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Virtio 1.0 says that the effective capacity of vrings
is equal to the virtqueue size. When avail ring was full,
we detected it as empty.
Change-Id: I72f5d45cdc14db6b934ce7780e603a3de3131594
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/396804
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Ensure the used->idx changes are visible to
the guest at the time of interrupt.
Change-Id: I245b91c7fbe2e21600aa94d8314271ea5b987343
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/396929
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This enables some code reuse for future patches.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I296a6c5c0915da4a77a1ab43e8f10a335b7d16d0
Reviewed-on: https://review.gerrithub.io/396736
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This will be used in the upcoming thin provisioning
patches. A thread the wishes to insert a newly
allocated cluster into the blob will send a message
to the metadata thread to perform to call this
function, and if it succeeds, sync the blob's
metadata.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I26fcca235ea0d7a187b9fe559851290b6db13649
Reviewed-on: https://review.gerrithub.io/396711
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
For now, use this to add some assert() calls to ensure
per-blob metadata operations are only called from the
thread that initialized/loaded the blobstore.
Upcoming patches will utilize this for metadata updates
required due to cluster allocations on thin provisioned
blobs. In that case, the cluster allocations may not
always be done on the metadata thread - but we want
the metadata thread to actually do the metadata sync
operation to guard against races from allocations on
multiple threads in parallel.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifa0adfe8b7e61ba770449d1e076126ecb9d7a556
Reviewed-on: https://review.gerrithub.io/396712
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Add api and unit test functions for
change number of blocks for provided block device.
Change-Id: I55d67c99375cb88bdaa79ce1a36d4298223beddc
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Reviewed-on: https://review.gerrithub.io/390802
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fixes github issue #218.
This patch introduces spdk_cpuset object to store and manipulate
the set of individual CPUs. The main objective of this object is
to replace cpumask declared as uint64_t and extend the limitation
of supported CPUs (lcores) above 64 CPUs.
spdk_cpuset is always allocated dynamically and accessed by opaque
pointer, what makes it easier to extend in the future without
breaking API/ABI.
This patch also extends parsing function allowing to set cpumask
using a list of cpus e.g. "[0-4,10,12]" sets mask of 0,1,2,3,4,10,12
as well as hexadecimal string with and without "0x" prefix.
Change-Id: I475c3ba7fab629021a22e03176e57e400dd24a49
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/390794
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also move the test plan file to a more appropiate location.
Change-Id: I462058279d4d2dc03790657b82b3cfeb00c8a93a
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/394180
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
At least on some ARM platforms, virtual address map
uses lower 48 bits of address space, compared to just
47 on x86-64.
This does double the size of the top level map from
1MB to 2MB.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I18f95a10b4913dca0256cbbd8d05f3baa5ab69fa
Reviewed-on: https://review.gerrithub.io/396318
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
These two RPCs were missed in the initial COUNTOF conversion.
Change-Id: Ia40eb0cf3b5c859e2b63148e442fd7d52d1032a5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/396231
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
To use JSON dump of iSCSI global parameters as configuration file,
at bootup, it must have completeness.
This patch fixes the following:
- DefaultTime2Wait was not contained.
- MinConnectionsPerCore was not contained.
- Converting only 0 to "None" for dump is not efficient.
Change-Id: I740e6938c216c5c62df6ee70b0ceac40fd0cac00
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/396100
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
New added vhost user messages: GET_CONFIG/SET_CONFIG are
used for get/set virtio device's configuration space, this
commit enable the new added vhost messages.
Change-Id: I5c3e3f8fb6ed55e99299323c39658765b1724bb8
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/386545
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This fixes a false positive warning when building on GCC 7.2.1 with
CONFIG_COVERAGE=y.
bdlen is always initialized on the path where it can be used, but the
compiler seems to get confused when coverage is enabled, so zero out the
value at the top of the function.
Change-Id: Ifc13abff80124cad3d26286ffebf84f967141d13
Reported-by: John Meneghini <johnm@netapp.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/396244
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently, there is no possibility to save read only blob to disk.
This patch modifies behaviour so that read only flags are applied after syncing blob.
This is analogy to resize, set xattr and remove xattr operations.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Iffed601c78cb83231bb20e7ef05b73847dc3c95a
Reviewed-on: https://review.gerrithub.io/394243
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Idadd4eb7574b005cce8b888b28c8c3b6993343a4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/395555
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_vbdev_unregister() is part of internal bdev API,
yet bdev module that uses spdk_vbdev_register() directly
will not be removed correctly when using delete_bdev RPC.
spdk_vbdev_unregister() is now consolidated with
spdk_bdev_unregister().
This comes up when deleting lvol bdev, as it does not use
spdk_bdev_part_* functions.
base_bdev->vbdevs entry was not removed for bdev that lvs
is created on.
Additionally patch expands test to create lvol bdev,
after removing it using delete_bdev RPC.
With ASAN enabled this would report accessing
already freed memory previously.
Change-Id: I9547e83862e2daa50355d56a1c9f453aaa6cfdb8
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/395711
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Similar functionality is needed when migrating a connection
to its new core after login. So make spdk_iscsi_conn_stop_poller
reusable for that case, and call it in the login migration path.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie014a2e50d6ed02165317deab85c943225953197
Reviewed-on: https://review.gerrithub.io/395857
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
All calls to this function now use spdk_env_get_current_core()
as lcore, so remove this parameter.
All calls to this function also use _spdk_iscsi_conn_free() as
the stop_fn, so remove that parameter as well - just call that
function directly from the callsites and eliminate the extra
event.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I639e63d26fbfcc054137d9b453be2927e2c1f625
Reviewed-on: https://review.gerrithub.io/395854
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This function is now only called from one place, and moving
this inline will simplify some future patches which will
consolidate the login and full-feature pollers.
No functional change.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7d4e6973882c7b579e341283648317e8e06d998a
Reviewed-on: https://review.gerrithub.io/395853
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
vhost I/O only need to be split on 2MB boundaries if
there is a break in the VM's memtable at that 2MB
boundary.
This should drastically reduce (if not eliminate)
the intermittent test pool failures seen recently.
virtio limits number of segments to 128, but this
2MB splitting could introduce additional segment
breaks which we do not allocate IOVs for. In almost
all cases, there are no memtable breaks except at
low 2MB, so most of the extra segment breaks we are
adding are unnecessary.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I12d85c289ad80c7bb65e3d2030a2405092b19deb
Reviewed-on: https://review.gerrithub.io/396058
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
iovcnt value was set to 0 instead of being assigned from
input argument.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I0f7e89871357f5db9a5a34c801176bc5c7870021
Reviewed-on: https://review.gerrithub.io/395959
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously vdev->name was being allocated/freed
separately in virtio_pci and virtio_user backends.
Now it's all done in generic virtio library and
cleans up some code.
Change-Id: I810e976d09781c0c9b25c6f7fd957a83aad6c7b8
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/394704
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Caught by the latest scan-build.
Change-Id: I606a30447e5221c86e79accb9a2c1fe76e9eeee0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/396054
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Some upcoming changes will effectively render this moot
anyways by adding an epoll/kqueue descriptor to poll
on in all cases (not just connections that have been
idle for 5ms).
The epoll/kqueue code was just ifdef'd out instead
of removed - some of this code will be useful
and reusable with minimal changes in the upcoming
patches.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0c354390537e6369cb3c32e78a59c300dec6d098
Reviewed-on: https://review.gerrithub.io/395553
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
This function was originally named spdk_iscsi_write_pdu()
in lib/iscsi/iscsi.c. Since this is an operation on a
connection, add "conn" to the name and move it to conn.c.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaad022907d43788108d5b2660306abcf5e94040d
Reviewed-on: https://review.gerrithub.io/395522
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This will enable some future enhancements where the main
iSCSI connection poller will not try to flush PDUs, we will
just start a separate poller to periodically flush PDUs in that
case.
This is all part of broader scheme to enable epoll() for
iSCSI. Making these changes allows us to avoid using epoll()
to signal when TCP buffer space is available.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6fe9314e386673fcc87bb15580ef808838c55a7b
Reviewed-on: https://review.gerrithub.io/395521
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Currently we test up to 512KB I/O sizes, and this I/O
size could fragment to 129 IOVs if split on 4KB
boundaries if the buffer start is not 4KB aligned.
This is likely the cause of a recent slew of failures
in the test pool which coincide with updating to
fio 3.3.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I189157af578e75e025ca8e3420712739e604fca7
Reviewed-on: https://review.gerrithub.io/395872
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This allows a channel's request_set resources to be
used for queuing I/O requests. This is needed
for upcoming thin provisioning functionality,
where we must queue I/O requests that need to
allocate a cluster, if another cluster allocation
is in progress.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie8d3e799afc0b56bc95ba5ecab11253d8bc8608f
Reviewed-on: https://review.gerrithub.io/395037
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Now all operations (both single buffer and iov-based
payloads) which span a cluster boundary get split into
separate blob calls for each cluster.
This will simplify upcoming patches that need to do
special operations if a cluster needs to be allocated.
This code can now be added to just the single cluster
operations and not have to worry about splits. It
will also simplify the code that will eventually queue
requests which require a cluster allocation if an
allocation is already in progress.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I22a850e6e23e3b3be31183b28d01d57c163b25b1
Reviewed-on: https://review.gerrithub.io/395035
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
A future patch will queue an operation in
_spdk_blob_request_submit_op_single if the cluster is not allocated
and another allocation is already in progress. If the queueing fails
because of no channel resources, we want to fail the callback and
need to do this before creating the batch.
This causes a bit of code duplication, but in the end should make the
code easier to read.
While here, pass spdk_blob instead of spdk_blob_data to
_spdk_blob_request_submit_op_single. This simplifies a future patch
which will need the spdk_blob when queueing an operation. It also
incidentally makes it consistent with _spdk_blob_request_submit_op_split.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib0ec0e5138eac5bf208fcde6676cd2a77a1a663f
Reviewed-on: https://review.gerrithub.io/395196
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Make it non vhost-user specific. The same
code will be later reused by upcoming
construct_virtio_pci_bdev RPC call.
Change-Id: I6964fedea2a1d52c9b06d5fd8cafe745e06df0ab
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/394504
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The default name remains as sprintf("VirtioScsi%d", counter++).
Change-Id: I244c1389f8dfac16f61aaf1d610a7888dd55e56c
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/394446
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is just the API introduction. See subsequent
patches for its RPC usage.
Change-Id: Iadb7c9bf6a56ab4330c9f2215c6006a2935d208d
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/394445
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently setting cpumask to portal is possible only through
iSCSI.conf. This patch makes possible for any user to set cpumask
through JSON-RPC too.
The following are done in this patch:
- To keep compatibility, cpumask parameter handled as optional.
- Python test code is added.
- Current python script for JSON-RPC does not work correctly for
IPv6 and the issue is fixed.
Change-Id: I42ef397ce95040a36db4430417a35e9e97527477
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/391728
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This concept was added very early in the SPDK iSCSI target
development process when there was a high focus on maximizing
throughput on a single iSCSI connection with 512-byte reads.
Realistically, in multi-connection environments focused on
predominantly 4KB (or more) workloads, this concept loses its
effectiveness - it is relatively rare that PDUs from multiple
I/O would coalesce within the default 8us flush timeout period.
There were no users of flush timeout in the SPDK tree - it was
not even documented in the iSCSI configuration file example and
there was no way to modify it at run time. So leave the change
out of the CHANGELOG.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I08c3e959fb3945dc2c9cb89248305d0c88aa778f
Reviewed-on: https://review.gerrithub.io/395520
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Currently cpumask cannot be specified for each portal when it is
created by JSON-RPC and portal group creation is not unified
between iSCSI.conf and JSON-RPC.
This patch does the following:
- cpumask string is decoded in spdk_iscsi_portal_create() which
is common between iSCSI.conf and JSON-RPC.
- parsing configline of portal is difficult to understand and
hence it is refactored.
- UT code is added.
JSON-RPC will be added by the next patch.
Change-Id: I13b9989263fae5facff260de32a55ec99f5d5a06
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/392447
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For I/O that do not span a cluster boundary, just issue
a single batch command to underlying block device.
For I/O that do span a cluster boundary, issue a batch
command for each against the blob (not the block device)
for each cluster accessed by the I/O.
This is all in preparation for upcoming patches which
enable thin provisioning and hence cluster allocation
in the I/O path. It will simplify implementation of
the cluster allocation path since now that code only
needs to be concerned with a single allocation at once.
Splitting for readv/writev will be handled in a
later patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia2341abbda599dace3357c4eec06ab6602ef81a8
Reviewed-on: https://review.gerrithub.io/395027
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This breaks out the logic for building a batch for
non-iov operations to a separate function. Future
patches will do further modifications on this
new function - separating it out into two separate
functions, one for operations that span a cluster boundary
and one for those that do not.
No functional change here - this is just moving code
around to reduce size of upcoming patches.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id1e67e6305d7ba2317700e1477e12c749ebf664c
Reviewed-on: https://review.gerrithub.io/395026
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
These will be used to implement user request splitting
on cluster boundaries.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I29e00ae9555fdd8a149e92be3cf88a2e528f5c0e
Reviewed-on: https://review.gerrithub.io/395021
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This clarifies that the read/write/etc. operation is
being performaned on the block device. This
clarification will be important in some upcoming
patches which will batch similar operations on a
blob (as part of splitting a user request into smaller
operations if it spans a cluster boundary).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic574804c15f769ee80c1b6f68ca3b77ec910f0f6
Reviewed-on: https://review.gerrithub.io/395017
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
These were unused in blobstore so remove them for now.
This reduces number of code changes in some upcoming
patches.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I02e04f7d84fff1d2a70f371d222425f373a5d4ff
Reviewed-on: https://review.gerrithub.io/395016
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
There existing some cases like in our UT code, the
start_poller_fn and stop_poller_fn is not configured.
Add a check here and properly handle these cases.
Change-Id: Iaac83d78547432584f6de0c54e9d2e06b9b35741
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/392996
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When there are two bdevs built on the same io_device,
it is possible that one bdev entirely saturates
underlying queue, not letting the second bdev issue
a single I/O. The second bdev will silently fail any
subsequent I/O and append it to the nomem_io list.
However, since we resend I/O only from I/O completion
callback and there's no outstanding I/O for that bdev
(io_outstanding==0), the I/O will never be resent.
It'll be stuck in nomem_io forever.
This patch makes nomem_io list to be shared between
bdevs built on the same device. It is now possible
that I/O completion callback from one bdev will retry
sending I/O from other bdev.
The shared bdev data is based on thread-local
bdev_mgmt_channel, so doesn't need any external
synchronization.
Change-Id: Ia5ac3a1627ce3de4087e43907c329aa7d07ed7c7
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/394658
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
We would still like to keep up this Macro, then if users
want to change this value with their own ones,
they can change it.
Change-Id: Ic13c9ba0889955cc41a75f700c58822728782f6c
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/394311
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Individual threads can now pause and resume subsystems
as needed, so the master_thread isn't used.
Change-Id: I49ccb1f87d3e5956db7bd8fc9da0542c5c487923
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/394260
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use the general purpose mechanism to pause a subsystem when a bdev
is hot removed.
Change-Id: I3cd4fb15140d6682707b7840c6a9c3f63fe48e55
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/394259
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
When the state change is known to fail immediately, use
a return code instead of calling the callback.
Most of the callbacks didn't actually check for errors,
so this patch also doesn't check for errors on return
codes. That should be done in the future.
Change-Id: I67e03f93d7f53892473dfc073f4150e7e620cad2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/394281
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Eventually this should probably queue, but for now
just fail these commands.
Change-Id: Ie1b1088aa38198c17062ac9874539ad6d99b01eb
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/394125
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
These commands can now pause a subsystem if they need to operate
on it. We don't currently implement any of the NVMe commands
that would need to pause, so this patch is simpler than most
would expect.
Change-Id: I25bfdf8e7577cda2bb0ce248d2889447032b9b4c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/394121
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch makes possible to set and get Header Digest and Data
Digest of target.
Change-Id: I1d1b892f9dfb747c0f5ad8fc4fddef40929b4143
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/394482
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
When a target is created by iSCSI.conf, only valid CHAP params
are passed to spdk_iscsi_tgt_node_construct().
When a target is created by JSON-RPC, help information encourages
users to specify valid CHAP params but
spdk_iscsi_tgt_node_construct() does not check CHAP params and
users can create targets whose CHAP params are invalid.
Change-Id: I7e9057a982f21f04782481cda74208a139c1fdad
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/394481
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add JSON-RPC to add an LUN to an existing target. The parameter
lun_id is optinal and if skipped, the lowest free LUN ID will be
assigned.
This JSON-RPC is tested in iscsi_tgt/rpc_config.
Change-Id: I010619f2d4ccec89c589bb0618466b4d15949ebb
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/385181
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Removing an LUN from an existing iSCSI target is possible by
removing the corresponding BDEV. However adding an LUN to an
existing iSCSI target is not possible yet.
Add a new function spdk_iscsi_tgt_node_add_lun() and related
functions first toward supporting this function.
JSON-RPC for this operation will be submitted an another patch.
Informing the newly added LUN to the initiator is not included
in this patch. Hence this operation is possible only for any
inactive target.
Change-Id: I3a28f4d75a17126e49c9d12ce64c3ad68f231840
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/385180
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This prepares for some future blobstore.c code that will use these
bs_dev functions directly making possible to read from different device
than the one in the current context.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I55b15544ea4b53475c4b72ee5c92ff1c0a2b8c88
Reviewed-on: https://review.gerrithub.io/393781
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I35779dc547e0c084086ec6d9bf44f86850cb7f05
Reviewed-on: https://review.gerrithub.io/393780
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Iadb29a8ce8dcebfea68d4feeb5f3de1bb3124f16
Reviewed-on: https://review.gerrithub.io/392286
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ib3470fbac49e92308ed14e20ccde6655354f2580
Reviewed-on: https://review.gerrithub.io/389577
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
bdev hotremove event is send directly to hotremove callback given
during spdk_scsi_dev_construct() call. So any bdev hotremove might be
promoted to whole SCSI device removal (like in vhost) wich will trigger
LUN removal. But after returning from hotremove callback LUN and device
might be still referenced (eg to register poller or by outstanding IO).
Even worse: spdk_scsi_dev object is not dynamicaly allocated but
returned from static array which mean there is no way to detect
use-after-free error on spdk_scsi_dev by any tool. This might lead to
using SCSI device that is freed or assigned to different device.
To fix this:
- always delete LUN using hotremove path
- defer spdk_scsi_dev delete/removal after all LUNS are really
deleted.
Change-Id: I65598bf42cd507f620095dff5d32509a0424d060
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/393674
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In current bdev_virtio_scsi PCI enumerate callback
implementation we rely on a global variable - a global
list of virtio devices. We do not need any opaque
context data inside this callback just yet. It will
be required to add virtio devices in runtime. See the
next patch for details.
Change-Id: I116cbd3bd633f56922eedcc7c07b8c0310e51d49
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/394444
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
`rpc.py remove_virtio_scsi_bdev <name>`
The RPC will remove entire Virtio SCSI device together
with all underlying bdevs.
Change-Id: I87f349b0e7543955d54a34406cf73c4a91d1495f
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/394170
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Consider the following scenario:
* user deletes a Virtio-SCSI bdev (spdk_bdev_unregister)
* user deletes entire Virtio-SCSI controller (virtio_scsi_dev_remove)
If there were any descriptors open with asynchronous
remove callback specified, the first bdev unregister
won't delete the bdev and won't notify the Virtio-SCSI
controller in any way. Subsequent Virtio-SCSI controller
deletion might result in unregistering the same bdev
again. This patch makes Virtio-SCSI controller open a
dummy descriptor on each of its bdevs, so that it's
notified of any started bdev_unregister
Change-Id: I9a8c841d08393ef1940c4cebc9dfcb58e9b0ac4a
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/394169
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previous nbd implementation only processes one I/O at a time.
This patch increases spdk_nbd_disk io queue-depth.
lists are added to accommodate and coordinate overplapped nbd_io.
Change-Id: I3bda2c957a561b884ebfe9550b7cb6f3c991aef8
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/392609
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Apply a state for nbd io instead of using flag
bits like payload_in_progress and resp_in_progress.
Change-Id: I331567f7c4d7a6a886a145390a8b1e4db0f6040c
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/392175
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This avoids having to dereference the spdk_bdev_io's
channel in the spdk_bdev_free_io() path.
Cleaning up after hotplug events should ensure that
all associated bdev_ios have been freed (not just
completed) before the bdev channels have been freed,
but this patch gives us some more wiggle room in this
area.
Results in a small (1-2%) performance degradation on
a bdevperf microbenchmark, but should result in no
noticeable difference on any real world workload.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id8b88300fc53e8c0b83309a738a4c3bd2aeaff52
Reviewed-on: https://review.gerrithub.io/394399
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
There is no need to keep a lun name anymore - we always
use the bdev name as the lun name so it is not providing any
additional value. This also keeps us from associating
the same bdev with different LUNs on different iSCSI target
nodes or vhost-scsi controllers.
Side effect of this change is:
1) Use "bdev_name" across the APIs to make it more clear
what these names refer to.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3d42fde22087352ce1d5dc80178bd8c5cac8cb7c
Reviewed-on: https://review.gerrithub.io/390843
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If the file have cache data and not flushed, the file length will be
not correct.
Change-Id: Idde23e158c1d010e67579b5d6a8d87d3cfbfed2d
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/393784
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This patch provides logic for returning errors instead of
assert when size is larger than blobstore size.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I16d12338e2b682c39bd33d507d57ea126501a0d7
Reviewed-on: https://review.gerrithub.io/392749
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
when test hotplug case with large write command which need r2t, after the
device hot removed, the outstanding r2t commands are waitting for data out PDU,
and the primary commands probably already return with error, then the lun
could be deleted, later the related data out PDU will received and try to send
other r2t, this patch make sure the r2t command sent smoothly even the device
hot removed.
Change-Id: I49061d1258e65cb0964526f755d870ebe7095920
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/394321
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Recovery code did not claim clusters taken by metadata.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: If6726eddd22f4e1a3f9814b2348243155fb0fdb9
Reviewed-on: https://review.gerrithub.io/394173
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This `len` field describes the amount of bytes
*written* by the device. It is used to prevent
the driver from reading buffer memory that wasn't
really written to - it could contain either
leftover values from previous requests or even
be completely unitialized.
In a couple of invalid-request error conditions
we still write the VIRTIO_BLK_S_UNSUPP response while
returning used_len == 0, but that's fine. A properly
written driver will likely handle both of these cases
the same way.
Change-Id: I8e9f3a8051561096e2ee755122d534b4ffd94db1
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/393963
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This `len` field describes the amount of bytes
*written* by the device. It is used to prevent
the driver from reading buffer memory that wasn't
really written to - it could contain either
leftover values from previous requests or even
be completely unitialized.
Change-Id: I67aee5c8b9455fc86cdeb600ea3a051a7737c66f
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/393962
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Removed task `pending` queue. All tasks were
temporarily put in this queue just to be moved
out of it yet within the same reactor cycle.
Change-Id: I32d402f7abd3cfa21c263f41149425abdc71992f
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/393911
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The thread variable defined in the struct spdk_nvmf_rdma_qpair is
not used. Just remove it.
Change-Id: I5f406ff276733cc9474a997b3c18d23c7420cac8
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/394152
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I343d2f1a8f3327ad030a786633bbe9e8c66c14fc
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/394138
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The NVMe spec states that nqn names are to be encoded in utf-8. The
prefixes of all nqn's are already required to be ascii by virtue of
their structure so they are already valid utf-8, but the user specified
strings should be checked for valid utf-8 strings.
Change-Id: I20090d366e93e98af4932eaa120d4edb6e512206
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/394118
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Modifies spdk_env_init() and spdk_mem_map_init() such that
they return on failure instead of terminating with exit()
or abort().
Change-Id: I054c1d9b2e46516ff53d845328ab9547f54bdbc4
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/393987
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
When trying to create a scsi dev with inexistent
lun (bdev name), the scsi_dev_construct would
just return a NULL without printing any error.
We should probably return an error code of some
kind, but for now let's just print an extra
message.
Change-Id: I28823c2cb83204c11207d3e7011fecbf725a691c
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/393918
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is more efficient and buf_link users don't
need the extra flexibility that TAILQ provides.
link could also be changed to an STAILQ, but its usage
is not in the performance path so not touching that
as part of this commit.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7df2cc24a3784add8370db859003783e92cbfc21
Reviewed-on: https://review.gerrithub.io/393834
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Purpose: If the qp creates in a failure state,
we should set cm_id = NULL, then we do not need to
destroy the qp which is not created.
Also this patch add return value check while calling
spdk_nvmf_rdma_qpair_initialize.
Change-Id: I084c186738fcf6079cb36666f68e10b906e77145
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/394016
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This only adds the option and metadata flags.
Actual functionality will be added in an upcoming commit
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I66015f48f34d4c7c64fce1831ebaed134098407c
Reviewed-on: https://review.gerrithub.io/390196
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch fixes issue when blobstore doesn't serialize flags
when there is also at least one extent or xattr.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I85d5031dc45df510cebe1acf4694ab62bca2e720
Reviewed-on: https://review.gerrithub.io/393770
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The same check is done inside
spdk_vhost_vring_desc_to_iov.
Change-Id: Id93a05848ed69b8dd048ac490df2432b4252c6e0
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/394088
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This makes spdk_file_write consistent with _file_sync.
The lock should not be held across calls to send_request.
Change-Id: I2a2987bbfe2688b520901267aa5a197bd55565a8
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/393599
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added tighter regulations to the NVMe-oF nqn checking to conform with
the nvme 1.3 spec. including, adding checks for valid nqn's in the case
of a generic uuid based nqn and checking for reverse domain name and
colon prefixed strings in a user specific nqn. Unit tests included.
Change-Id: I3ee4b269d0655ac9968699617e43e3297695c7ed
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/393265
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_scsi_lun_complete_mgmt_task can't be called with
lun == NULL, as it deliberately dereferences it.
Change-Id: Idf9b100b66cdc7fdfe2011fb7f9b2477651f1e8c
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/393912
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
This requires exposing struct spdk_io_channel in the
public header - mark it as internal with Doxygen
comments to make it extra clear that applications
should not use the data structure directly.
This is a very hot function in the main I/O path,
so making this function inline has a significant
performance benefit. A bdevperf microbenchmark
using null bdevs shows a 11% improvement.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I70e30e184000705704bb004e8da1c7476a6aceeb
Reviewed-on: https://review.gerrithub.io/393824
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Purpose: Make the max_channel_ops initialization
in the single place, and we only need to call
spdk_lvol_bs_opts_init instead of spdk_bs_opts_init
Change-Id: If1dd0b30e982a26ab2801a0dd99dd82633e02c74
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/393722
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Retrieve LUN data directly from struct spdk_scsi_lun rather than copying
them into struct spdk_scsi_task, and access the LUN via the task->lun
pointer.
Change-Id: Id8745f116bc559fb2f9e58811c2b9781c8cbdae8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393709
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
For a given hardware queue size, only allow a quarter of the queue size
to be returned as completions in a single call to
spdk_nvme_qpair_process_completions(), and adjust num_trackers to match
so that num_trackers + max_completions_cap doesn't exceed the hardware
completion queue size. This ensures that there is room in the
completion queue if new I/O is issued in response to completions before
we ring the completion queue doorbell.
The choice of 1/4 queue size is arbitrary; this seems to be a good
compromise between completion batch size and number of trackers.
Change-Id: I2c5aad7b98bfc8b33e53242240b2c9254fa05b4e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393529
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Most relevant fields get initialized after the structure
is returned to the caller, so this memset is just
wasting CPU cycles.
buf still needs to be set to NULL, so just set that
field explicitly.
bdevperf with null backend shows a 10% improvement
with this patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I92ef0ea887f1307abdcd4b80bc08b45ccefe27d9
Reviewed-on: https://review.gerrithub.io/393714
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
bdev_ch->io_outstanding - NOMEM_THRESHOLD_COUNT
can be negative, so change the type, then
we can make the comparision correct.
Change-Id: I823ceb3dd053f71c1902ee66cf4caba719a7ae7d
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/393437
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The normal execution path for read/write commands is that none of the
checks fail; annotate all of the checks in spdk_bdev_scsi_readwrite()
with spdk_unlikely to encourage the compiler to generate the happy path
as straight-line code and move the error handling out of line.
Change-Id: Id0e606c78f0b99662e5c27e3bfa32535de20aa13
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393700
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
spdk_bdev_scsi_read_write_lba_check() was only called from one spot, and
moving its code directly into the caller makes the code simpler to read
and more consistent, since now all of the sense code setup is directly
in spdk_bdev_scsi_readwrite() rather than being split across two
functions.
No functional change.
Change-Id: Ic6ee21b06c721a949579817f0339a4b047ffb2cc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393699
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Only two comparisons are necessary to ensure the I/O is in range.
Change-Id: I66e93abbf9b25949b3c783a47d26918362f00b93
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393698
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
The SCSI layer no longer needs to know about the parent/subtask
relationship maintained by iSCSI.
Change-Id: Ia6f7c5367c5b656bd7521ed1abb6d0f713a0500b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393697
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Simplify the logic in spdk_bdev_scsi_read_write_lba_check() to do the
LBA bounds check for both parent tasks and subtasks.
This will allow the parent/subtask relationship to be fully moved to
iSCSI in a follow-up patch.
Change-Id: Ic66466f7d77270c303c94b7002196398a34e4814
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393696
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
In the patch 393582, by analyzing the code,
accumulation of write completion to bdev was duplicated by
data_transferred and bytes_completed.
Hence accumulation of data_transferred for write was intended
to be removed.
However by mistake accumulation of data_transferred for read
was removed.
In this patch restore accumulation of data_transferred for
read and remove accumlation of data_transferred for write.
Test code to catch this degradation will be added by another
patch soon.
Change-Id: Iea9883e8ef1bfb0bdf00e291712e6faf2fad281f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/393713
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
it appears that scsi name string designator
format in SPDK is not correct. The name strings
are not null terminated (which causees garbage
to appear in scsi_inq -p 0x83). Further, they
are not padded correctly.
SCSI port name and device name strings must be null
terminated. Further, the length must be a multiple
of 4 bytes, and must be padded with 0s.
See SPC-5 Section 7.7.6.11.
Change-Id: Id7c4ad27e5c3a17ad68e5e466142801c0d03b1f2
Signed-off-by: Karandeep Chahal <devilsgrotto@gmail.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/393027
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch will follow the change 393212 by Daniel.
For read command:
- primary's scsi.bytes_completed is for read completion from bdev.
- primary's scsi.data_transferred si for send completion to initiator.
Two variables have its own meaning, respectively.
However for write command:
- both primary's scsi.bytes_completed and scsi.data_transferred are
for write completion to bdev.
Hence for write we should use only either one and it looks that
bytes_completed will be appropriate.
Change-Id: I991c00170ad3651fe926173657e8a49a9a38d02a
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/393582
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If spdk_nbd_stop is called because of socket error,
ioctl of NBD_CLEAR_QUE and NBD_CLEAR_SOCK may be blocked
which will cause deadlock.
close(kernel_sp_fd/spdk_sp_fd) first, then nbd kernel
module will not block them .
Change-Id: I9527d74986cbd2b6188b9a91154de8b0b85d2836
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/393581
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Each SCSI task should only report its data_transferred; the
parent/subtask relationship should be handled in iSCSI.
Change-Id: Ibece110fd8cca4e94648942fe6b5e004a4fd8a80
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393212
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch remove need for additional buffer when translating error code
to string.
Change-Id: Iaa60088b5c450581d3cdddbb425119b17d55a44b
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/386114
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We need to make the channel operations numbers configurable for blob.
Reason: for iSCSI tests, if there is one CPU core, there will be only
one channel, thus read stress tests would
fail since we need more operations for blob channel.
Select a value equal to the small buffer size(8192) for
bdev layer, thus we can solve the iSCSI read issue
correctly. Since for bdev read, we currently only
allow 8192 active bdev I/o requests, so this solution should
work.
PS: Current solution is still not perfect, I think the very
precise fix is that we need to restrict sending I/Os
to the blob, if there is no channel operations. Though
current code, we have retry I/O in bdev , but it still fails
the iSCSI high pressure test.
Change-Id: I211f7a89d144af2c96ad4cc1bd7ac8e94adc72e7
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/393115
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also added vbdev_get_lvol_by_unique_id function.
Change-Id: I55a64df008c23c0fedb8a59ef67e2c356097e780
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Reviewed-on: https://review.gerrithub.io/392658
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Ic0cdcf088ebd5053f2e69ad2e607ee825d96fcb6
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Reviewed-on: https://review.gerrithub.io/390202
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Added aliases list to bdev struct.
Added 2 API calls to add and remove aliases.
Added test for adding and removing aliases.
Change-Id: I1815aec8c02cfa398b2d1de41577197315665fdc
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Reviewed-on: https://review.gerrithub.io/390200
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Existing implementation worked, but results in a lot of
unnecessary error messages.
Found while debugging nightly iSCSI tests, which generate
a config file from the existing configuration and calls
spdk_trace_get_tpoint_group_mask() to do it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I36df9ca30c7dd2d0039da2377173edb11b1f47dc
Reviewed-on: https://review.gerrithub.io/393680
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When LUN with no io_channels is being hotremoved,
the hotremove poller was being started on the core
pointed by lun->lcore. However, this field is only
valid when there are io_channels open. For example,
when user tries to delete a bdev that's attached to
an unused vhost controller (no io_channels ever opened)
the scsi layer could start a hotremove poller on
lun->lcore == 0. If SPDK runs on a different cpuset -
not containing CPU0 - SPDK could even segfault.
Change-Id: I31a363352875d944f220b0296d5cfe570319023d
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/371863
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Distinguish between "not enough descriptors available"
and "iovcnt > queue depth".
This patch brings back I/O re-queueing for virtio bdev
module. It was temporarily disabled by 451de7e1 [1].
[1] 451de7e1: "virtio: switch to the new virtqueue API"
Change-Id: I4c4f6a6d9d91373ee647ea7cafd53ad999aa6aa2
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/393447
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This gives user an information of which
device caused an error.
Change-Id: I47eb1c1b6c9adc36a9c26b4c36b6f6bc1e467ca7
Suggested-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/388195
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Handle the possibility of the system strerror_r() returning an error
internally within spdk_strerror_r() so that callers don't need to check
the return value.
Change-Id: I0571c3f5999873575562d08a04d714716a7881ff
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393105
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7df72b21f78ab7f0fe0389b478072330bbbd4215
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/393015
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
SPDK drops the connection when it observes any sequence error of
Data-out PDU when ERL = 0. This is too severe and change dropping
the connection to Reject response.
This issue was detected by libiscsi test suite.
Change-Id: Ic8f50ce55c4e73c8517f726e8cf0e4ff8a0953df
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/391158
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
LUN hotremove callback can be triggered when
it's vhost-scsi controller is not started
yet. In such case it is not necessary to check
against HOTPLUG flag (if the controller doesn't
have any driver connected yet, there might be
no negotiated flags whatsoever).
Change-Id: Ic7c78e3bdf45fa4d5628cd19c4c5ad723699e45f
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/371864
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The error vbdev was missing a remove_cb, so unregistering its base bdev
would cause issues later since the error vbdev would not get torn down.
Change-Id: I6d94f67ce0d4f20a7a63c902b11d965115481df7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393264
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is not used in the generic SCSI layer.
Fixes: 8eba104b73 ("iscsi: Fix the bug for hotplug when read IO is
running.")
Change-Id: Ie0715ea0ee5084eaf1321ba2f65f7bfa674c663a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393211
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The SCSI task transfer_len field is only distinct from length in iSCSI;
vhost should always have length == transfer_len.
Change-Id: I37faec26f0f49c27019a965c1f1f48903ca54b58
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393203
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Only Makefiles for libraries that directly depend on DPDK (rather than
the SPDK env abstraction) should add $(ENV_CFLAGS).
Change-Id: Ifdf44d3ef8c42bbf7f20edd524b330d00658235b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/392818
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Netmasks with 0 bits of prefix do not make sense. For example,
192.168.1.2/0 would allow hosts from any address, but this is
indicated with a special "ANY" value rather than a normal netmask.
Netmask prefixes of the full address size (e.g. 32 for IPv4 and 128 for
IPv6) are still allowed, since this represents a valid configuration
that matches a single specific address.
This also allows the IPv4 netmask math to be done entirely in uint32_t
instead of promoting to unsigned long long to avoid undefined behavior
when bits == 0 (shift count would have been 32 in that case).
Change-Id: I021b718e6a46f628c96a358edae816de81cd8929
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/392969
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ibffb43e39b44e5f443d3dfbfa5b5d7dcac3243ef
Reviewed-on: https://review.gerrithub.io/391182
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ic2c23d16360b26359c2a32920b89f2f3a21a2a9a
Reviewed-on: https://review.gerrithub.io/391191
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This allows the user to pause a subsystem, make some
modifications, and then resume it.
Change-Id: Ia18371023d8fc66e1797fda293a01b68c0a61c96
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/392422
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Make them usable for other Virtio drivers
(not just SCSI).
Change-Id: I7ae2c43f311fefd40e447c8b5accaf824d0e23de
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/393121
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The only errno value that can usefully be returned from malloc(),
calloc(), realloc(), strdup(), etc. is ENOMEM, so there's no need to
translate the errno value to a string for the error message.
Change-Id: I8e8bd4f12ec4f3b99649760e397e1bc71cca7eff
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/392985
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
pthread_create() returns error codes via its return value, not errno.
Change-Id: Iac0f2380dd4daf15dc48829a3b9b0a75aedd87d1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/392984
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Use spdk_bdev_unmap_blocks() in place of spdk_bdev_unmap(), since the
SCSI UNMAP descriptor already natively operates in blocks rather than
bytes.
Change-Id: I16a0c38d203cf5f60484229e7872783b11d8de6e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393202
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Use spdk_bdev_flush_blocks() in place of spdk_bdev_flush(), since the
SCSI SYNCHRONIZE CACHE command already natively operates in blocks
rather than bytes.
Change-Id: I11810948fb8d0b6b911d48620e2a363f767cc7f7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393201
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
If faced no memory status, we should set it to nomem,
thus, we can make this I/O resubmit it again.
Change-Id: Icb9a7eeab3278021fa95a5e33c7ff55b3cc62558
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/393122
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
SPDK reactor is one per cpu and SPDK_MAX_REACTORS is used as the
maximum number of cpus locally in the file.
When the maximum number of cpus is changed, SPDK_MAX_REACTORS is likely
to fail to be changed.
Adopting two improvements for iSCSI by Ziye to the reactor will be safer
than now for the reactor.
- iscsi/conn: remove rte_config.h header
- env: export spdk_env_get_last_core function
Change-Id: I4941454ffdb704fa7799549e1f190c9bae3a4421
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/392911
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Adopt two improvements for iSCSI by Ziye to VHOST.
- iscsi/conn: remove rte_config.h header
- env: export spdk_env_get_last_core function
Change-Id: I8f067093d593c8d483c52587669f8b0b706f497f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/392910
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The latest patch for the iSCSI connection is applied to the vhost
too.
RTE_MAX_LCORE in the for loop is removed and the for loop is
replaced by SPDK_ENV_FOREACH_CORE().
When the cpumask is unexpectedly 0, not 0 but the first core is
returned.
Change-Id: I39cfc2219a3532eccc8c0ce59712102b947a76d7
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/392588
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Previously we used to manually set
vdev->max_queues and called virtio_dev_restart
to go through all virtio init states, negotiate
features and allocate virtqueues. This is,
however, insufficient for Virtio-Blk, where we
e.g. need to check against negotiated multiqueue
flag before deciding how many queues we can use
(reading num_queues field from device config is
forbidden unless VIRTIO_BLK_F_MQ is negotiated).
This patch refactors queue-num related code
and also removes various restrictions. If device
supports less queues than requested, a warning
will be printed during initialization, but
the device will now continue to init normally.
The queue-num negotiation for virtio-user should
be eventually moved to upper layers, but that is
not necessary for now.
Change-Id: I418b56fa62c17b547243422ea077f0d76555bd13
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/393087
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If the host fails to send some events,
the next event it succeeds to send
might have an EVENTS_MISSED flag set.
Once virtio receives such event, it will
schedule a full bus rescan to manually
detect any changes.
Change-Id: Ifa66536f8e2980ad31ee68769f042f08100da54e
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/392780
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Don't allow starting full device rescan
if such scan is already in progress.
This patch also makes it possible to
start a full scan while only particular
targets are being rescanned.
Change-Id: I8677f640a4e5d9d8c486dfe1e9a58331e941a461
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/392373
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Implemented eventq rescan message.
When the host hot-attaches a target
to the controller, it will now
automatically appear as a virtio bdev.
Change-Id: Ie81352b70808a0e078009f618cc1fcfed407d1ba
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/392374
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A public API to remove a virtio
controller is about to be published
soon. Hence, we need to cover all
possible corner-cases where calling
it could cause a segfault.
Change-Id: I804cc0bee4a60ab8fc159bb98b7712cc258117f3
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/392271
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The upcoming rescan implementation will
do scan I/O on existing I/O virtqueues.
To handle scan cleanly, we need to queue
scan I/O if virtqueues are full.
The heuristics for resending I/O should
be sufficient for all real case scenarios.
A scan I/O consists of either 2 or 3 iovs.
A raw I/O consists of at least 2
descriptors. Since most I/O requests
contain some additional payload, in 99%
of cases the scan I/O will be successfully
resent after polling a single I/O response.
To handle the remaining 1%, we try to
resend a scan I/O up to SCAN_REQUEST_RETRIES
(currently = 5) times.
Change-Id: I8c84ed1d109d9f403c9d7b8efabb904eb26183db
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/392174
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
SCSI doesn't specify any payload associated
with TEST_UNIT_READY and START_STOP_UNIT
commands. Sending a payload didn't cause
any troubles so far, but still it's not SCSI
compliant and hence has been removed.
It is now assumed that iov_len of 0 means
that no payload should be sent.
Change-Id: Ibdfa7cd77af6049132278911d872cd52c10be6c7
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/391868
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
