The CSTS.SHN is changed only in shutting down the controller,
nvmf library already ensure that all the outstanding IOs will
be flushed before that, so we can remove this check here.
Change-Id: Ib93a256e986b7b2ec1da0fc7992feb3a02c1d657
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11674
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
After finishing migration in source VM, the subsystem is in
PAUSED state, the controller is dead for the source VM, we will
destroy the controller when disconnecting socket, but after that,
we should RESUME the subsystem so that it can be ready for the
next new client.
Fix issue #2363.
Change-Id: Icf0999b9085cebe8be4c8783e1a43bb13d4f7987
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11422
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The completion callback of `spdk_nvmf_subsystem_resume`
and `spdk_nvmf_subsystem_pause` can run in different
core other than the `vfu_ctx` core, this may lead to
race condition when changing controller's state. Here
we use a thread message to change it in the same thread
context.
Change-Id: I53d139adcca6ff72a3b91a2a931f1239f3271fa9
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12558
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Clarify via a variable name that we're dealing with the admin CQ
specifically.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I032f6b27e2d75bffb9d95481f177ce0c3655550c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12556
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Constantly polling the socket degrades performance significantly.
Polling the socket at a much lower frequency, every 1ms, is good enough
for now.
fixes#2494
Signed-off-by: Thanos Makatos <thanos.makatos@nutanix.com>
Co-authored-by: John Levon <john.levon@nutanix.com>
Change-Id: I4a7d35c45ece863b9df756324c23f41736df49f8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12494
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The spdk_rmb() in nvmf_vfio_user_poll_group_poll() is unnecessary: we
already have a read barrier for SQ tail updates at the per-SQ level, so
this doesn't add anything.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I88cddd968f4a949640754526e19cb869d9fb31af
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12381
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There's no need to spdk_rmb() in nvmf_vfio_user_sq_poll() unless we
actually found the tail has advanced.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I778835c527409764c3db78459b2aa76420cc0105
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12378
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
We need to keep track of the shadow doorbell buffer locations, and make
sure to re-initialize on resume.
Co-authored-by: Thanos Makatos <thanos.makatos@nutanix.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: If3ba456fb35f6f6199e4ff14cec1aad96775f71a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12237
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
There were a couple of places not using the standard formatting for qid
still.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: If96c3f6d762128b0f274e2c4e9eebf4e80e35139
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12346
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
As per the NVMe specification, a host can identify two areas of guest
memory: one of which is used for the host-written doorbells, and one of
which contains event indexes. The host writes to the shadow doorbell
area, but also writes to the controller's BAR0 doorbell area if the
corresponding event index is crossed by the update. This avoids many
mmio exits in interrupt mode, where BAR0 doorbells are not directly
mapped into the guest VM, with greatly improved performance.
This isn't a useful feature in BAR0 doorbells are mapped into the VM, so
we explicitly disable support in that case.
NB: the Windows NVMe driver doesn't yet support this feature.
Although the specification says that the admin queues should also engage
in this behaviour, in practice, no VM does, so have to include some
hacks to account for this.
Co-authored-by: John Levon <john.levon@nutanix.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I0646b234d31fbbf9a6b85572042c6cdaf8366659
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11492
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This lets us use it more widely.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I9c67be19020677fab3eafe05c1e0f91c3d04611d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12307
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Only FDs are used for passing them to another process,
we can unlink them after creation.
Here we only unlink the files created in vfio-user,
and there is still one file created via libvfio-user,
it will be fixed via
https://github.com/nutanix/libvfio-user/issues/660.
Partly fix issue #2449.
Change-Id: Ie27640e0cb85f44596e9d0ad5a2b67adf0419f5c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12195
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
No functional change; this just makes the poll code a little easier to
read.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: If6d1dcd940ed5b461856b535b1bf01c4efa8612a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12076
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The rdma buffer for stripping DIF metadata is added. CPU strips the DIF
metadata and copies it to the rdma buffer, improving the rdma write
bandwith. The network bandwidth during 4KB random read test is increased
from 79 Gbps to 99 Gbps, the IOPS is increased from 2075K to 2637K.
Fixes issue #2418
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Change-Id: If1c31256f0390f31d396812fa33cd650bf52b336
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11861
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
To help grep, use a standard sqid:%d style format for identifying queue
IDs.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ib82c81939f85f9beb333a4db10d006524522a1d9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11822
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
As a general utility function, move it up with the others.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I32881c01afd9819c889730d7c09163c95fbb827e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11790
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For each queue, track its doorbell location individually, rather than
needlessly recalculating it every time we look up the doorbell value.
This will also greatly simplify shadow doorbell support.
Co-authored-by: Andreas Economides <andreas.economides@nutanix.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I6882d2f92ee2f2b2b90c54ee14e5f6b41ecca85d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11789
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In vfio-user transport, whenever one IO is completed, it will trigger
an interrupt to guest machine. This cost quite some overhead. This patch
adds an adaptive irq feature to reduce interrupt overhead and boost
performance.
Signed-off-by: Rui Chang <rui.chang@arm.com>
Change-Id: I585be072231a934fa2e4fdf2439405de95151381
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11840
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Rename ->doorbells to ->bar0_doorbells. This will help avoid confusion
later with shadow doorbells.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Id432938cfeb3033e79dc6e1b491dad964227687a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11788
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
NVMe over PCIe Transport Spec 3.1.2:
The host should not read the doorbell registers.
Explicitly refuse these reads.
Co-authored-by: John Levon <john.levon@nutanix.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ie64fd5ce7988ee86c612b3ef6046a57af467e266
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11787
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Refactor controller reset a little bit for cleaner code.
Co-authored-by: John Levon <john.levon@nutanix.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I2b3323005d4e788ffe980d41c349702828886981
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11786
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
If we're in interrupt mode and live migrating a guest, there is a window
where the I/O queues haven't been set up but the device is in running
state, during which the guest might write to a doorbell. This doorbell
write will go unnoticed. This patch ensures that we re-check the
doorbells after an I/O queue has been set up.
Fixes#2410
Signed-off-by: Thanos Makatos <thanos.makatos@nutanix.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I161d2a0e7ab3065022b2bccbe17f019640cceeba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11809
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Make sure cq->group is set even in interrupt mode.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I9f722917a8e3aebbd5d66648a3909f795897ec1a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11997
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We were accidentally reading the spdk_nvme_status from the CPL; on one
test, this was contributing to 2% of cache misses.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I7c967690458a183799f8d835360800d3094c3131
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11849
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When vfu_run_ctx() returns EBUSY, due to an ongoing quiesce, we did no
work, so should return SPDK_POLLER_IDLE.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I5953ab652f0adf22df81c94c4bece507833cece4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11810
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We will use nvmf library CSTS.CFS instead so that the client can
get this error status.
Change-Id: I42c248a7333d1f9c940bb29135c887a61c906bd4
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11676
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
No logic code changes, we will define a nvmf controller migration
data structure in public header file, this is a preparation patch.
Change-Id: I0a98581b320ac9b12b7e4bf838222c5075168e64
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11493
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To fully support interrupt mode for the vfio-user transport, we need to
arrange to wake up in one of two conditions:
- we receive a vfio-user message on the socket
- a client writes to one of our BARs
In response, we can process any pending vfio-user messages, as well as
poll the actual queue pairs.
As there is no way for a client-mapped BAR write to cause us to wake up,
interrupt mode can only work when mappable BAR0 is disabled. In that
case, each BAR write becomes a vfio-user message, and can thus be
handled by registering the libvfio-user socket fd with SPDK.
For the poll group poller, we enable interrupt mode for it during the
vfio-user ->poll_group_create() callback; this only works in the case
that no other transports without interrupt mode support are sharing that
poll group.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ic784d01078b2006edb27892fc0613f934eca930b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10722
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
One simple fix for nvmf_vfio_user_qpair_abort_request().
Current implementation mixed up request of abort cmd and the request
to abort, which cause problems.
Signed-off-by: Rui Chang <rui.chang@arm.com>
Change-Id: Ia0db9aa738e372789fc502ef877fd1c841c0a2e3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11711
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
A common pattern is:
if (foo->thread == spdk_get_thread())
cb(arg);
else
spdk_thread_send_msg(foo->thread, cb, arg);
for cases where it's important the callback runs on a particular thread,
but it doesn't matter if it's synchronous or asynchronous.
Add a new API to support this pattern, and convert over the current
instances.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Idfbf77c02c9321c52e07181ffd8b0c437e1ab335
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11503
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
We can ask libvfio-user for the listening socket fd, and register that
for SPDK interrupt handling.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I8d0ba7a86403f2d0170b9359480f1fefc1036557
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10721
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
The accept poller only needs to run when vfu_attach_ctx() makes sense:
in other words, when we don't have a controller created.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Icef4e6184c9ae6d7951d015530a05132c4ba6994
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10720
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Now vfio-user owns its the accept poller itself, there's no reason to
loop across all endpoints: instead, the lifetime of the accept poller is
better matched by creating it in the ->listen() transport callback.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ia92e29b1cee263f1461f640cfdd27cdb674848fb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10719
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
For the benefit of forthcoming vfio-user changes, register the poll
group poller prior to calling the transport create callback, and pass in
a pointer to the poll group itself.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Idbc24126c9d46f8162e4ded07c5a0ecf074fc7dd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10718
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The above values were added with shared CQ feature, and they
are left when restore the CQs in destination VM.
Change-Id: Ib1f28dad833da31e571eb2e2f0b5c81f0bf05a3b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11419
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The CSTS register in source VM was left to migrate.
Fix#2362.
Change-Id: Ieef028578d2897b27a6ff594b16801462eb1b75e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11418
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The controller data structure may be freed before subsystem resume done
callback, we can take endpoint as the input parameter to avoid this issue.
AddressSanitizer: heap-use-after-free on address 0x625000046100 at pc 0x00000082818f bp 0x7fff7b09bd10 sp 0x7fff7b09bd00
READ of size 8 at 0x625000046100 thread T0 (reactor_0)
#0 0x82818e in vfio_user_dev_quiesce_resume_done /spdk/lib/nvmf/vfio_user.c:2147
#1 0x782cc0 in subsystem_state_change_done /spdk/lib/nvmf/subsystem.c:634
#2 0xad047b in _call_completion /spdk/lib/thread/thread.c:2344
#3 0xabc48d in msg_queue_run_batch /spdk/lib/thread/thread.c:710
#4 0xac0670 in thread_poll /spdk/lib/thread/thread.c:926
#5 0xac0ead in spdk_thread_poll /spdk/lib/thread/thread.c:986
#6 0x9a5b4f in _reactor_run /spdk/lib/event/reactor.c:920
#7 0x9a6442 in reactor_run /spdk/lib/event/reactor.c:958
#8 0x9a717c in spdk_reactors_start /spdk/lib/event/reactor.c:1060
#9 0x99884a in spdk_app_start /spdk/lib/event/app.c:643
#10 0x407e82 in main /spdk/app/nvmf_tgt/nvmf_main.c:75
#11 0x7f822095ff42 in __libc_start_main (/lib64/libc.so.6+0x23f42)
#12 0x407abd in _start (/spdk/build/bin/nvmf_tgt+0x407abd)
0x625000046100 is located 0 bytes inside of 8320-byte region [0x625000046100,0x625000048180)
freed by thread T0 (reactor_0) here:
#0 0x7f82219ff91f in __interceptor_free (/lib64/libasan.so.5+0x10d91f)
#1 0x837059 in _free_ctrlr /spdk/lib/nvmf/vfio_user.c:2976
#2 0x837327 in free_ctrlr /spdk/lib/nvmf/vfio_user.c:2996
#3 0x843541 in nvmf_vfio_user_close_qpair /spdk/lib/nvmf/vfio_user.c:3742
#4 0x7d1d91 in nvmf_transport_qpair_fini /spdk/lib/nvmf/transport.c:604
#5 0x7ad922 in _nvmf_qpair_destroy /spdk/lib/nvmf/nvmf.c:1055
#6 0x761362 in nvmf_qpair_request_cleanup /spdk/lib/nvmf/ctrlr.c:4026
#7 0x761906 in spdk_nvmf_request_free /spdk/lib/nvmf/ctrlr.c:4041
#8 0x75a931 in nvmf_qpair_free_aer /spdk/lib/nvmf/ctrlr.c:3576
#9 0x7ae626 in spdk_nvmf_qpair_disconnect /spdk/lib/nvmf/nvmf.c:1127
#10 0x83db36 in _vfio_user_qpair_disconnect /spdk/lib/nvmf/vfio_user.c:3433
#11 0xabc48d in msg_queue_run_batch /spdk/lib/thread/thread.c:710
#12 0xac0670 in thread_poll /spdk/lib/thread/thread.c:926
#13 0xac0ead in spdk_thread_poll /spdk/lib/thread/thread.c:986
#14 0x9a5b4f in _reactor_run /spdk/lib/event/reactor.c:920
#15 0x9a6442 in reactor_run /spdk/lib/event/reactor.c:958
#16 0x9a717c in spdk_reactors_start /spdk/lib/event/reactor.c:1060
#17 0x99884a in spdk_app_start /spdk/lib/event/app.c:643
#18 0x407e82 in main /spdk/app/nvmf_tgt/nvmf_main.c:75
#19 0x7f822095ff42 in __libc_start_main (/lib64/libc.so.6+0x23f42)
previously allocated by thread T0 (reactor_0) here:
#0 0x7f82219fff16 in __interceptor_calloc (/lib64/libasan.so.5+0x10df16)
#1 0x837413 in nvmf_vfio_user_create_ctrlr /spdk/lib/nvmf/vfio_user.c:3010
#2 0x83bc68 in nvmf_vfio_user_accept /spdk/lib/nvmf/vfio_user.c:3313
#3 0xabfbd8 in thread_execute_timed_poller /spdk/lib/thread/thread.c:872
#4 0xac0c75 in thread_poll /spdk/lib/thread/thread.c:960
#5 0xac0ead in spdk_thread_poll /spdk/lib/thread/thread.c:986
#6 0x9a5b4f in _reactor_run /spdk/lib/event/reactor.c:920
#7 0x9a6442 in reactor_run /spdk/lib/event/reactor.c:958
#8 0x9a717c in spdk_reactors_start /spdk/lib/event/reactor.c:1060
#9 0x99884a in spdk_app_start /spdk/lib/event/app.c:643
#10 0x407e82 in main /spdk/app/nvmf_tgt/nvmf_main.c:75
#11 0x7f822095ff42 in __libc_start_main (/lib64/libc.so.6+0x23f42)
SUMMARY: AddressSanitizer: heap-use-after-free /spdk/lib/nvmf/vfio_user.c:2147 in vfio_user_dev_quiesce_resume_done
Change-Id: Icf5e5b360b9107a3c5eb960ae59b7fe10ace1c66
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11420
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
nvmf_vfio_user_sq->size and ->qsize both hold the number of entries in
the queue; merge them.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I6c7c2984cbdf90079eec9222e1acbedb92207308
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11297
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since we already allocate ->sg on a per-request basis now, drop the
->reqs_internal allocation in favour of allocating individual requests
and placing them on the ->free_reqs queue, which simplifies the need to
track the array. For request abort, we'll use the ->outstanding request
list, now we have it, to find the victim request.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I25227ccd2ab7e00c8a2e7b2e2af2dc3b073584cd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11427
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Use of %p in logging simplifies this code a little bit.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I8e5daa59a614b8bcde7d67d1e5cc6196923031a8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11244
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Avoid using the modulus operator in the hot-path cq_is_full(),
by aping how cq_tail_advance() is written.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Idbdf1715ab30d08233b38aa7691f0212ae93a542
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11445
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Avoid using the modulus operator in the hot-path sq_head_advance(),
by aping how cq_tail_advance() is written.
Suggested-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Id1e9d63a08e470344fdeb549d78ea505088b1a62
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11436
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
There is very little now shared between submission and completion
queues, so drop usage of this struct, folding its remaining members
into the relevant owning types.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I02195d1944ca9905ef03ddf2c099ddb806df70dc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11296
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Consistently wrap access to queue heads/tails, so it's easier to make
further changes. Adjust sqhd_advance() to match the head/tail naming of
the accessor functions, and move the definitions to be close to each
other.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I197e230ecc4e67fe0207f29281d7e4ca946c22e1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11295
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add a struct defining the local mapping of a queue.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Id3bbdf72bfc082f4496748571bd2617bdafe4309
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11294
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
With the new added property access API, we can send a internal
property access request to NVMf library, and we can use
it to reset controller.
Change-Id: Iee8b1146d9eb31bc98a9b297e5c635e43e6fdb12
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10952
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
VFIO in QEMU uses region 9 as the PCI passthrough devices' migration channel.
The format of the region 9 migration region is as follows:
------------------------------------------------------------------
|vfio_device_migration_info| data section |
------------------------------------------------------------------
QEMU will access vfio_device_migration_info to controll the migration
process.
For SPDK vfio-user target, we also implement the BAR9 via libvfio-user,
and we also define the NVMe device specific migration data stored in
data section of BAR9. QEMU doesn't care about the format in data section,
it will help us to gather the NVMe specific migration data in source VM and
then restore the migration date to data section of BAR9 in destination VM.
The core idea to implement live migration will following the device state
change which is controlled by QEMU. First QEMU will try to STOP the device
in the source VM, and set the destination VM to RESUME state, SPDK will save
NVMe devic state data structure to BAR9 in the source VM once the subsystem
is paused, then QEMU will read BAR9 in source VM and restore the content of
BAR9 in destination VM, finally in the destination VM, we will restore the
NVMe device state include BARs/PCI CFG/queue pairs in the destination VM.
Change-Id: I42e38f28c3ff59831be63290038b50d199d06658
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7617
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When doing live migration the migration BAR region is bytes stream
data, so here we use the helper function to save current controller
state into the stream in source VM and load it as internl data
structure from steam in destination VM.
We will remove the `unused` attrubute in next patch.
Change-Id: Ib44adb351c697b50b9220ce6943cc017137a6064
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10336
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When doing live migration, the destination VM will construct
ADMIN queue pair at the beginning, but the controller isn't
in READY state, we should not poll the ADMIN queue pair right
now. This is fine for normal controllers, normal controllers
will set ADMIN queue pair state in CC callback.
Change-Id: I0db36f75a463fb7476ee62323f9ed0c74c2451dc
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10621
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When doing live migration, there are some spdk_nvmf_ctrlr internal
data structures need to be saved/restored.
Change-Id: Ie39482e8c49765c36fc3700fbac4ce47ef306f29
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10058
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previously we didn't post the response for CREATE IO SQ command
until the queue pair is connected finally, but for coming live
migration support, we will connect IO queue pairs in the destination
VM, and this function will also be called for this case, so here
we add a flag to indicate the CREATE IO SQ case.
Change-Id: Iab4c64a7ebb72bcffbfff712dc729c40eead7c7d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9464
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The miration region data structure is from `vfio_device_migration_info`
defined in `linux/vfio.h`, `vfio_device_migration_info` is in the 0th
offset of the VFIO_REGION_SUBTYPE_MIGRATION region, and in vfio-user,
we reserve first one page of BAR9 for this MMIO accesses.
libvfio-user already helps us to hide some implementation details
based on vfio migration specification, here we just use the two
fields to help the migration process.
Change-Id: I8917ba892bbfdfdf4f135f5d6b4923ab0e4a6250
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7628
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We will report the live migration region to VM via sparse
mmap, offset after 0x1000 is the NVMe device state data
structure, and offset start from 0 is the structure
vfio_device_migration_info defined by the VFIO driver.
All accesses between 0x0-0x1000 will use the MMIO callbacks,
and accesses to NVMe device state will use shared memory map
way.
Change-Id: Ib456fc61f587c1bffa8b38506b4480a6066abe87
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7627
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We will use the NVMe device state data structure to save/restore
a NVMe controller in source/destination VM.
NVMe device migration region is defined as below:
----------------------------------------------------------------------
| nvme_migr_device_state | private controller data | queue pairs | BARs |
----------------------------------------------------------------------
Change-Id: Idc73976e1de7f6da2da58e71db86df8cbb0d314d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7626
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For CREATE IO SQ command, we will defer to post completion
until the SQ was connected, we may call post_completion()
in different threads, so here we will send a message
to CQ thread when necessary.
Change-Id: I87a0f8982811c76ce8eb49db6a136f4cbe6e0a93
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11078
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We will assign each SQ with different poll group in round
robin way by default, this may cause race condition to
post completions to one CQ in different threads, so here
we will assign the SQs which share one CQ into same poll
group.
Also enable multiple cores NVMe compliance tests so that
to cover shared IO CQ case.
Change-Id: I9d7cc78aaedceed23986d9f89ed945e0eb337e09
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11115
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previously we mixed SQ/CQ definition together, one queue pair
data structure may contain CQ,SQ or both CQ and SQ separately,
while here, we split the queue pair definition into SQ and CQ
respectively as code cleanup.
The NVMf library uses queue pair concept, but for vfio-user
case, each SQ created by VM is mapped to NVMf queue pair, so
we also change `connected_qps` to `connected_sqs` to reflect
the fact.
No actual code logic change in this commit.
Change-Id: I293ccbfbf054fe864d348fc56793dd1ccd366f6d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11036
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
libvfio-user will call quiesce callback when there are
memory region add/remove and device state change requests
from client, and in the quiesce callback, we will pause
the subsystem so that it's safe to do everything after
it, then after quiesce callback, we will resume the
subsystem. The quiesce callback is also used in
live migration, each device state change will quiesce
the device first.
Change-Id: I3a6a0320ad76c6b2d1d65c754b9f79cce5c9c683
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10620
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We will use the controller state to implement the coming
device quiesce feature, it's safe to do anyting when
a subsystem is in PAUSED state.
Change-Id: I3b466ed01848e668a1ffcea1d4f1466e971afa23
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10619
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Users may remove the listener while VM is connected, the endpoint is
associated with Unix Domain socket file, we should destroy the endpoint,
however, the controller maybe still active for now, because nvmf
library will help us to disconnect all queue pairs in asynchronous
way. Here we use the same way as the NVMf library to destroy the
controller when there is no connected queue pairs.
Fix#2246.
Change-Id: I0775d5294269d848d859968edafc8eaa1d89a32c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10379
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The controller may be freed eailer than endpoint, so we still
need to unregister the memory region from SPDK. The case
can happen when removing the listener while VM is connected.
Change-Id: I95d49cefdbff3e0bdea316fac824ef8b218fcd2c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10378
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
We should hold the transport lock to iterate endpoints.
Fix issue #2313.
Change-Id: I8e0539a51e843a3299908d9da7749fe9becb5e7e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11037
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
We met an issue that client got a NVMe completion with old SC
bit, so we add a memory barrier here to ensure the NVMe completion
is fully populated.
Fix issue #2323.
Change-Id: I7887d789a0acd3634a10aa7dc8de81a153137ae7
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11076
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For the purpose to support shared IO CQ feature, we will construct
the queue pair data structure at the beginning, and setup SQ/CQ
separately in CREATE IO SQ/CQ routine.
Previously we will disconnect queue pair when got a DELETE IO CQ
command, now we disconnect queue pair when got a DELETE IO SQ command,
and in the disconnect completion callback, we will release the IO SQ
resources, there is a case that the VM will just RESET/SHUTDOWN
controller when IO queue pairs are connected, for this case, we
will also try to release CQ resources in the disconnect completion
callback.
`free_qp` function now is only called when destroying a controller.
Change-Id: I45ec679ddb63bdf1feeba5dc2bd39cae3ba4aa89
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10532
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently we only use round robin way to assign queue
pair to each poll group.
Change-Id: I8efaf3ef25402102dd1eaa7f7aa8bd8bbe071c25
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11114
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Acceptor poller is registered using rate value
from transport opts structure, but this structure is
initialized on generic transport layer when create()
function completes, so at this time acceptor poll rate
is 0.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I2138825f3ff9dd3cc0ccaa65e8d5c23aab338ad4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11095
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Set the SQ/CQ size to 0 so that we will not try to remmap
the ADMIN queue pair in the memory region callback before
the ADMIN queue pair was enabled.
Change-Id: I739a2ec3abcb54b17f31f2bc120312cd02ffeef1
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10531
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When deleting a CQ, we will use its reference count to check
how many SQs associate with it.
Change-Id: Ic82e50de0fa92d2f03119ac2cc90ef86a0ea375e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10530
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a preparation to support shared IO CQ case, and we will
create/delete SQ/CQ separately, so define the queue state as the
first step.
Change-Id: Ie7b5807dc4aa5a2c117e15f61f3a9baa60135653
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10529
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Macro PCI_CFG_SPACE_EXP_SIZE isn't defined in kernel 4.9.x, so
we use a fixed value here instead.
Fix issue #2282.
Change-Id: Ife1444e919e4c1dc9328437002c15befe2f393e7
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10691
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Not every transport requires accept poller - transport specific
layer can have its own policy and way of handling new connection.
APIs to notify generic layer are already in place
- spdk_nvmf_poll_group_add
- spdk_nvmf_tgt_new_qpair
Having accept poller removed should simplify interrupt mode impl
in transport specific layer.
Fixes issue #1876
Change-Id: Ia6cac0c2da67a298e88956734c50fb6e6b7521f1
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7268
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
On aarch64 platforms, doorbells update from guest VM may not be seen
on SPDK target side. This is because there is memory type mismatch
situation here. That is on guest VM side, the doorbells are treated as
device memory while on SPDK target side, it is treated as normal
memory. And this situation cause problem on ARM platform.
Refer to "https://developer.arm.com/documentation/102376/0100/
Memory-aliasing-and-mismatched-memory-types". Only using spdk_mb()
cannot fix this. Use "dc civac" to invalidate cache may solve this.
Profiling data did not show big performance degradataion.
Signed-off-by: Rui Chang <rui.chang@arm.com>
Change-Id: I9a18718f8c4307b3007b18c32ab02e6796548958
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10222
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The nvmf library will use INTEL VID/SSVID/IEEE values by default,
each transport can overwrite them if needed.
Change-Id: I9dad521c4d080b6f0cc1aaeb4b5d5f6863c6846d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10095
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Doorbell offset starts from 0x1000 is defined by the NVMe
specification, so rename it to remove `VFIO_USER` prefix.
Change-Id: Ie34b12b3d2618f9b0ad0cf7ccbb103ad2c900f47
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10364
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Calculate supported maximum number of queue pairs based on
BAR0 size, this value isn't allowed to change at runtime, also
define BAR4/5 based on number of MSIX vectors.
Since the maximum number of queues is a large value(512), so we
still define a default value when starting, users still can
overwrite this value with a number no greater than 512.
Change-Id: I1b4b6bdf2ff9d129c8bdd493ffdf0a51f8772d51
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10334
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
libvfio-user will save a copy inside the library.
Change-Id: If7bb052b03fb92e46abe50fa945b812d149ef01d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10363
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I58794b7b946eeb8ff82512905af0a296e3b534aa
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9817
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The pointer to struct spdk_nvmf_ctrlr is used to save mandatory
controller registers to the migration region.
Also rename some ctrlr/qpiar to vu_ctrlr/vu_qpiar.
Change-Id: Ifcb862bf4543a9df3c62d3b0a57b7f93228ccaba
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7629
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
1. use the transport lock to protect transport endpoints list.
2. don't use mixed errno and -1 as the return value, use -1 for all error cases.
Change-Id: I657fa06a6d82ee8dbeefaa3397df2285ba574b80
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9579
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When destroying controller, we will disconnect each connected qpair,
and in the spdk_nvmf_qpair_disconnect() call, qpair_fini() will also
try to hold the same lock, so existing vfio-user implementation assume
that qpair_fini() will not be called in the same context. Patch
https://review.spdk.io/gerrit/c/spdk/spdk/+/8963 remind me that
vfio-user has this issue. While here, we add one more thread poll
to avoid such issue.
Change-Id: I83b82ddcce3eb54c724291223e794dcb53a08059
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9998
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
CAP.CQR (Contiguous Queues Required) is always 1, so we should
return invalid field when PC bit is 1 and return Invalid Interrupt
Vector if Interrupt Vector is too big.
Also fix the issue that just creat/delete a CQ.
Change-Id: I7cc64a5946a1ed3161448fca8b433d08e5fee715
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10080
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
User may configure opts.max_qpairs_per_ctrlr, so use
opts.max_qpairs_per_ctrlr instead of using fixed default
NVMF_VFIO_USER_DEFAULT_MAX_QPAIRS_PER_CTRLR.
Also do not allow users to configure max_qpairs_per_ctrl >
NVMF_VFIO_USER_DEFAULT_MAX_QPAIRS_PER_CTRLR.
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Change-Id: Id9f1f796559f3bb8b2d3f5031606050470681b99
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9994
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
It's too strict to fail the controller when there are no free requests.
Change-Id: I0a66ff2d294a2fd9326506ea50af4213aaaf8e92
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9848
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: GangCao <gang.cao@intel.com>
For GET/SET FEATURES command, some feature IDs will have data buffer
while some don't have, so here we will return the buffer length base
on the feature ID. The length is defined by the specification.
Change-Id: Ie9798585fc74544b77998aeebc2a20614c1c25f0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9689
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The spec treats the sizes (MQES or qsize from create/delete
IO queue command) as a 0-based value of uint16_t, but vfio-user
treats them as 1-based value, so we need to use uint32_t to
make sure the value can't overflow. The same for NLB(number of
logical blocks).
Change-Id: I7654b7e12234525c0fce78a713dd50097e9b3d58
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9632
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The function is used to check the IO SQ or CQ exists or not,
so return bool type is better and also rename it.
Change-Id: I1af2a25255b012dcf1e1952b828617ededf9b897
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9680
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Andreas Economides <andreas.economides@nutanix.com>
Previously vfio-user will hit an error when creating a deleted IO SQ.
For lookup_io_q() function, actually we should not use the queue's
address to check the queue is exist or not, as when there is a memory
removal, we will also set the queue's address to NULL and reset it again,
so here we use the queue state to indicate the queue is exist or not.
Fix issue #2174.
Change-Id: I56bdd63947c2b30a598c427e64ff2dafe1cc1d2e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9605
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
