Also, store kernel name in the separate var and use it throughout the
entire script.
Change-Id: Iaa1c4c4aa52fb4aa708fb476478a81e9c6067b58
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2340
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This will probably be not installed by default in CentOS
installations. If we're going to use "config-manager" then
it requires yum-utils.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I7d310e376430b065742b671d983d11dd87bb5fac
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2221
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add new dev tool for enforcing proper formatting of the Bash code
across the entire repo. This is done in order of defining a common
set of good practices to follow when writing .sh|Bash code.
As powerful as shfmt may be, it allows only for some specific rules
to be enforced, hence it still needs to work side by side with
shellcheck syntax-wise. If it comes to style, following rules are
being enforced:
* indent_style = tab - Lines must be indented with tabs. The exception
from this rule is the use of heredocs with
<<BASH redirect operator. Spaces can be used to
format the line only if it's already preceded
with a tab.
* binary_next_line = true - Lines can start with logical operators. E.g:
if [[ -v foo ]] \
&& [[ -v bar ]]; then
...
fi
* switch_case_indent = true - case|esac patterns are indented with tabs.
* space_redirects = true - redirect operators are followed with a space.
E.g: > foo over >foo.
In addition, shfmt will enforce its own Bash-style for different parts
of the code as well. Examples and more details can be found here:
https://github.com/mvdan/sh
Change-Id: I6e5c8d79e6dba9c6471010f3d0f563dd34e62fd6
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1418
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This was added before the usage of having a SW engine and 2 HW
engines was fully thought out. The current rules are:
* if no HW engine specific enable RPC is sent, use SW
* if a HW engine specific enable RPC is sent, use it
* If a 2nd HW engine specific enable RPC is sent, ignore
In this scheme there's no need for an RPC that lets the user
choose which engine to use because they already do so when
they enable an engine.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I006ffb3b417f1e93bb061b29535d157ba66f03b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2033
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
With issues similar to https://github.com/spdk/spdk/issues/1293 it
would be better to use temporary directories for spdk workspace
instead of depending on the hardcoded path (/tmp/spdk). This will
mitigate potential scenario where permissions of the target dir
are suddenly changed in-between autobuild runs.
Change-Id: If44a2dcce712a185287186f33e7361223dc6d451
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1863
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Main subparser for rpc lists all positional arguments. Like so:
positional arguments:
{framework_start_init,start_subsystem_init,framework_wait_init,....
This again is duplicated with better help message.
This patch just removes this list, leaving the most detailed one.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5e6b9d0dd6ccf68bfe1cd5959ed509032738c037
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2126
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
The main parser will show usaged like so:
usage: rpc.py [-h] [-s SERVER_ADDR] [-p PORT] [-t TIMEOUT] [-v]
[--verbose {DEBUG,INFO,ERROR}] [--dry_run] [--server]
{framework_start_init,start_subsystem_init,............
The above contains very long list of all RPCs.
This is duplicates help from the subparsers, which contain
more descriptive help message.
This patch replaces the usage with:
usage: rpc.py [options]
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ibf400987103f5571f79c57d8a9588d97f463d773
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2125
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Any time script is called an RPC is called and socket
connection is attempted.
This should not be required when no arguments were provided,
such as calling help to explore possible options.
Example of the error:
[tzawadzk@PowerEdgeFour spdk]$ sudo ./scripts/rpc.py
Traceback (most recent call last):
File "/home/tzawadzk/spdk/scripts/rpc/client.py", line 40, in __init__
self.sock.connect(addr)
ConnectionRefusedError: [Errno 111] Connection refused
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "./scripts/rpc.py", line 2438, in <module>
args.client = rpc.client.JSONRPCClient(args.server_addr, args.port, args.timeout, log_level=getattr(logging, args.verbose.upper()))
File "/home/tzawadzk/spdk/scripts/rpc/client.py", line 56, in __init__
"Error details: %s" % (addr, ex))
rpc.client.JSONRPCException: Error while connecting to /var/tmp/spdk.sock
Error details: [Errno 111] Connection refused
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3734e1603fa7151fd53b99b8af4ea79bf82fe0f3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2124
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Expose a cache of pci devices in form of an assoc array that could be
looked up during the runtime of a script like setup.sh.
In case of setup.sh, caching speeds up execution quite visibly:
config run, no caching:
real 0m4.488s
user 0m1.440s
sys 0m1.260s
config run, caching in use:
real 0m2.876s
user 0m0.365s
sys 0m0.420s
Note that for initial config runs, binding controllers to proper
drivers is the actual bottleneck.
status run, no caching:
real 0m1.877s
user 0m1.252s
sys 0m0.984s
status run, caching in use:
real 0m0.371s
user 0m0.242s
sys 0m0.204s
reset run, no caching:
real 0m2.559s
user 0m1.409s
sys 0m1.322s
reset run, caching in use:
real 0m0.960s
user 0m0.432s
sys 0m0.419s
Additionally, in case common tools, e.g. lspci, are missing, fallback to
sysfs to pick all needed devices from the pci bus. Targeted for Linux
systems only.
Change-Id: Ib69ef724b9f09eca0cbb9b88f1c363edc1efd5dc
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1845
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is required for SSL verification when running on https.
Added argparse to handle multiple optional arguments.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ib8731bafaaf38264ed86ed84ca7eeca5ff4935b3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2122
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In create_vhost_vm we export SDPK_VAGRANT_DISTRO
variable to vagrant subprocess that is called
during the script.
But if SPDK_VAGRANT_DISTRO is an array variable,
then Vagrant will not see it
and always default to ubuntu16.
This small patch fixes that.
Change-Id: I45e9ed4f847e4fa10b90650a613f9cfe17ee38e3
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1676
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Purpose: To set the priority of the NVMe-oF connection especially
for TCP connection.
For example, the previous example can be:
trtype:TCP adrfam:IPv4 traddr:10.67.110.181 trsvcid:4420
With the change, it could be:
trtype:TCP adrfam:IPv4 traddr:10.67.110.181 trsvcid:4420 priority:2
The priority is optional. We try to change
spdk_nvme_transport_id but not in spdk_nvme_ctrlr_opts since
the opts in spdk_nvme_ctrlr_opts will reflect in every nvme ctrlr,
this is short of flexibility.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Change-Id: I1ba364c714a95f2dbeab2b3fcc832b0222b48a15
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1875
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The new RPC also includes and option for which
idxd config is to be used. Config options will be
explained in detail in a later patch.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I1322bab4d6ca9cc45ec3a56d7267dc7dc09dbea3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1726
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add bin/unbind support between the kernel idxd driver
and VFIO. UIO not tested but tested this extensively
on a system with valid idxd kernel driver and VFIO.
Future patches in this series add the actual idxd
low level library and bdev accel plug-in module. See
those patches for more details on idxd.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I09dd00b1aedcf88577335bde79d31cfd50ac4cde
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1721
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Disable default synced folder. We have our own set of
directories to synchronize so this is not needed.
Change-Id: Ie52e38af94fc2c403e3d3f095071833b9df09c9c
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1158
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I66c1c965d9de8b4e9625c1f1850cbb28d11138ad
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1684
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
In order to have all the boxes fully functional we
need to select the proper tool for synced folders.
FreeBSD boxes fail to set proxy properly via vagrant-
proxyconf plugin, so they fail to install rsync and sshfs
clients. NFS is pre-installed so we can use it.
Other boxes, like generic/fedora*, have issues using NFS
so we need to use sshfs/rsync instead.
Change-Id: Ic191b5a80dbd43479943c1739971abdff39baf41
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1581
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Icf45fbdff547fcf45c361b1d9c95b352756ad126
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1775
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Update vhost blk contruct rpc, make it enable to
support packed ring feature.
Change-Id: Ia1f75e72e8441e8d82fad89073e4875f89e5b9cd
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1567
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
On some systems, CC is set to a value with arguments already included.
Make sure not to lose those.
Change-Id: I93b354dc21f045f3cacff1f0d1214442ea893aa5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1500
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Sync "output" directory (containing all build results,
like doc, coverage, test completions, etc.)
from guest to host.
Change-Id: I9a57a72eb610aacde011fc39bb8d39c74486cef1
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1044
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add "halt" command before packaging, it's needed for this
process. Destroy the VM once it's packaged as we have no
further use for it.
Move provision-related commands to update.sh.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ib8041df023b80b4cd5fbad734481eb6bd4ffc21c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1154
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Some time ago I created a patch which unified all boxes
URLs to generic/* which come from a single author/company
and seemed to be quite universal.
Unfortunately some of the boxes are not that generic as
the name suggest, so I am reverting my change and will
use boxes from vaious sources.
Ubuntu 1804 - had heavy DNS issues due to hardcoded
addresses in resolved.conf. Very hard if not impossible
to fix if working with synced folders like we do.
Centos 7 and 8 - sshfs not available by default. Also
had some other minor quirks. Official boxes available
so let's use them.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I514d3b92c6ac5844b1929fdadfd35d6079933247
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1622
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Owner and group were not set properly on Ubuntu systems,
as they use different names for that.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ie7fc49516072ce4bcd506c4c39bbd26786004c49
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1580
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These can't be hardcoded to a single location. It makes
running multiple VMs with OCSSD emulation impossible.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I4ce0412fc9fc4542670a9e70c08219003e41828b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1488
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Just moving stuff around and updating some information.
I just felt like it's needed.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ia41f99603fb60111924cd5a3daf3c44091245c89
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1157
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We are not using VMs to run Vhost tests (at least at
the moment) and these steps are outdated. These steps
will need a re-write if we decide to put them back in,
so we can remove them for now.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I61d09bdc481814d8bcf6fe86ed4ccd84b36ad8d9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1155
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Remove Fedora 29 from the OS list. It reached EOL
some time ago and is not supported.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ie1bd704a39ab4c83d5e652741d21f6f0ac260540
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1156
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
service is a plain Bash wrapper which either executes systemctl or
rc sysvinit scripts directly, hence its exit status should follow
standard logic - 0 for success != 0 for failure.
Reverse the check to not complain about service failure when it
was actually successfully started.
Change-Id: I29dd22c884157182549ebcc2ab4097eb098d7d3b
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1603
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Test in event.sh take 5 seconds on CI at this time.
For the tests to run both SPDK_RUN_FUNCTIONAL_TEST
and SPDK_TEST_EVENT had to be enabled.
This served as very minor time saver, so removing
this flag shouldn't affter test times more that the
5 seconds.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie3eaa587daf28b2efbc3cfdff5ad648b7529e7f1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1493
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
time.clock() was depreceted since Python 3.3 and was finally
removed in Python 3.8.
https://docs.python.org/3.8/whatsnew/3.8.html#api-and-feature-removals
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I3ffe372b61c8afc0ddbbee0064b95059fa184616
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1369
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
By default "make install" installs pmdk header files in
/usr/local/include while autotest scripts expect them
to be in /usr/include.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I906ffd8a7858a37525758c3fc8129cb22286a8f5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1368
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
pkg-config was missing for pmdk installation.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I795c4b3a71d611292beaa650960afb639e827e78
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1328
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Vagrant fails during creation virtual machine using custom qemu emulator.
Setting machine type to "pc" resolved this problem.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I1822439bb2235b5881d3c331c378017928953ac4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1248
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Do not use iter_pci_class_code function in tests to
iterate over NVMe drives. This function can return
drives which at the moment of execution can not be
whitelisted for use.
This can result in test errors (such as simply
bdev_nvme_attach_controller RPC command failing) or
even using and deleting data from NVMe drive which
was not meant to be used in tests.
Fixes#1235
Change-Id: I82b9935fc88605b636c2096be6c71d4880a567c8
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1309
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will allow us to use num_cores and cpus_allowed option also
in Kernel initiator side.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Iad4e8bf7cd8a614ada8f443a8b1036dc2c4803e4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1173
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Error msg in common.sh should be printed into stderr
in order to avoid improper usage.
For example:
If env has no lspci and pciconf, then function
iter_all_pci_class_code will return the error msg back,
every word in error msg will be used by caller wrongly.
Change-Id: I6a875e49527539ba82bd331c8878e972e26cbc39
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1227
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add rpc_cmd() bash command that sends rpc command to an
rpc.py instance permanently running in background.
This makes sending RPC commands even 17 times faster.
We make use of bash coprocesses - a builtin bash feature
that allow starting background processes with stdin and
stdout connected to pipes. rpc.py will block trying to
read stdin, effectively being always "ready" to read
an RPC command.
The background rpc.py is started with a new --server flag
that's described as:
> Start listening on stdin, parse each line as a regular
> rpc.py execution and create a separate connection for each command.
> Each command's output ends with either **STATUS=0 if the
> command succeeded or **STATUS=1 if it failed.
> --server is meant to be used in conjunction with bash
> coproc, where stdin and stdout are named pipes and can be
> used as a faster way to send RPC commands.
As a part of this patch I'm attaching a sample test
that runs the following rpc commands first with the regular
rpc.py, then the new rpc_cmd() function.
```
time {
bdevs=$($rpc bdev_get_bdevs)
[ "$(jq length <<< "$bdevs")" == "0" ]
malloc=$($rpc bdev_malloc_create 8 512)
bdevs=$($rpc bdev_get_bdevs)
[ "$(jq length <<< "$bdevs")" == "1" ]
$rpc bdev_passthru_create -b "$malloc" -p Passthru0
bdevs=$($rpc bdev_get_bdevs)
[ "$(jq length <<< "$bdevs")" == "2" ]
$rpc bdev_passthru_delete Passthru0
$rpc bdev_malloc_delete $malloc
bdevs=$($rpc bdev_get_bdevs)
[ "$(jq length <<< "$bdevs")" == "0" ]
}
```
Regular rpc.py:
```
real 0m1.477s
user 0m1.289s
sys 0m0.139s
```
rpc_cmd():
```
real 0m0.085s
user 0m0.025s
sys 0m0.006s
```
autotest_common.sh will now spawn an rpc.py daemon if
it's not running yet, and it will offer rpc_cmd() function
to quickly send RPC commands. If the command is invalid or
SPDK returns with error, the bash function will return
a non-zero code and may trigger ERR trap just like a regular
rpc.py instance.
Pipes have major advantage over e.g. unix domain sockets - the pipes
will be automatically closed once the owner process exits.
This means we can create a named pipe in autotest_common.sh,
open it, then start rpc.py in background and never worry
about it again - it will be closed automatically once the
test exits. It doesn't even matter if the test is executed
manually in isolation, or as a part of the entire autotest.
(check_so_deps.sh needs to be modified not to wait for *all*
background processes to finish, but just the ones it started)
Change-Id: If0ded961b7fef3af3837b44532300dee8b5b4663
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/621
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add an new JSON RPC thread_get_io_channels to retrieve IO channels
of the threads. IO channel don't have its own name and so get the
name of the corresponding IO device instead.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id8fbb328ffba09e1eace35994cdbf36b24832b82
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/887
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add an new JSON RPC thread_get_pollers to retrieve pollers of all
the threads. By adding a helper function spdk_poller_state_str(),
output poller state as string to improve readability. Most of the
code of thread_get_stats and thread_get_pollers are common and so
unify these two RPCs as possible as we can.
Sample output of thread_get_stats RPC in doc/jsonrpc.md was wrong
because thread_get_stats doesn't output ticks. Fix this together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I003ffe569d3c0651ae65c5858eff8287f7e9031d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/604
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add an new JSON RPC thread_set_cpumask to control CPU affinity of
the thread dynamically from outside of SPDK application.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6b6b794405f612200a2c3cb27dc4fc1ad2e88bec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/501
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
PCM cpu measure give as result 1306 columns, we want check only ones which contains
SKTdata and SKTtraffic values.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I52b6781a7ff99e0d894f7f1c2b25b655fa274eb1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/946
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
To make it possible to add CONFIG_RAID5.
Change-Id: I1712bde5bae552811343fb1865f1224d3adb1c7e
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/854
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add flag for pmem dependencies needed by reduce and pmdk components.
Also add missing libpmem in Ubuntu section.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I596a1e6660f8b6f92bdab81046fa3533ae78fca3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/599
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add information about missing dependencies for Ubuntu versions smaller than 19.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I776d93e156c07c618df9cb5eeb99c0ca8f78e388
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/598
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add information about missing dependencies for Ubuntu versions smaller than 19.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Id48b462be35a761fd9fad4bdc48c1757cf5a7580
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/597
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Startup RPC only to avoid issues trying to switch while in use.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I7f1801905de0927f3610c4065182dd8fa88cdfdd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/660
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The copy engine library, modules and public APIs have been renamed.
Use of the word `copy` has been replaced with the word `accel`
short for accelerator in preparation for adding new capabilities
in the future. Additionally, APIs for what was previously called
the `memcpy` engine have been renamed to identify the engine as a
software accelerator.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia607aa718416146fbba1e6792b8de0f66bd8a5de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/576
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
MD022 Headers should be surrounded by blank lines
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I768324b00fc684c254aff6a85b93d9aed7a0cee5
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/656
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Build local vagrant box and add it to local vagrant box list.
Check if spdk box exist and use it instead of generic boxes.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ib3b87c9783354680657f96b5b5adea1706712c5e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/848
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove unnecessary case statement in Vagrantfile
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I6aa5d0650d268851ee5af73ffc2aa54d9396fec5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/834
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
New option --package-box will install all dependencies needed to build SPDK
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Iedc21812b754692a5eba87127186e11ec44d805d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/538
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When overriding with igb_uio you used to have to manually probe uio
before calling setup.sh. I feel this is a common enough use case that we
should check it in setup.sh directly.
Change-Id: I8a31f90bab6960eade468816ffe960820f83d2fe
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/818
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
PCM - Processor Counter Monitor is an application to monitor performance
and energy metrics of Intel® Core™, Xeon®, Atom™ and Xeon Phi™ processors.
Using this measure tool will help us to capture memory bandwidth consumed
on Intel processors.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ie580d2aad6ddd98c5256df65f65e478dd78317e5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/541
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
"MD032 Lists should be surrounded by blank lines"
Fix this markdown linter error by inserting newlines or
adjusting text to list points using spaces.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I09e1f021b8e95e0c6c58c393d7ecc11ce61c3132
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/434
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
We want to split pkgdep.sh to install packeges that are required to run SPDK
and that are needed by developers.
This patch is only split one install command to divide the minimal
dependencies from the developer tools.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I332cbc430bd04e6ef2872ab762da99e837bf0fc2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481595
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Allow for using appends instead of writes.
Change-Id: I2f0d3bcdbb0eee034f7b0b6349de854ddbf7273d
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481839
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Fix a bunch of typos, remove a few things and add some disclaimers
for legal cleanliness :)
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I366380f7b822c5b7a5ca92ab5a9bd3fd68296bee
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/483752
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
It's good to have a human readable domain again.
Change-Id: If773e28a267b635a94a45b07fba9a32d62d0c248
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/483146
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
This script takes an optional dpdk stats file argument and tries to
parse the information from that file into a comprehensible structure. It
then provides a basic UI for printing that memory information at various
levels of granularity.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ibbb09f41122be18b7e640781f3e140618e52c0ab
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477635
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This commit disables the custom identify handler by default.
The user has to explictly enable this handler via the set_nvmf_config
RPC or conf file.
Change-Id: I767816ba7639ebe78683993408ce6db02c7620fe
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479603
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
SC2010: Don't use ls | grep. Use a glob or a for loop
with a condition to allow non-alphanumeric filenames.
Replacing e.g. "ls /dev/nbd* | grep -v p" would be complex
and problematic as flag -I for ls is not working when
looking for pattern.
Change-Id: I9e88359d247fe5dcf952a3388b0e7f35164768c1
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481602
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Add to pernamently excluded in shellcheck:
SC2034: foo appears unused. Verify it or export it.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ib63edb8cdf8ec718981d28d5acec75772b825a48
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478102
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Correct shellcheck rule SC2045: Iterating over ls output is fragile. Use globs.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I436878774d6f86c23b1c5cf5220da297053f03e2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477397
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch adjust functional tests to
new FTL stack.
Change-Id: I0b8ff08c61793d7f1685942031aecf9cc88d1f24
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468738
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
We have added a lot of flags to this script over time to try and shorten
parts of it that take a long time or modify the way we make and
whatnot.
In the test framework today we really have two settings, we either want
to run the entire autobuild package with all the bells and whistles, or
we just want to make the code and get on with the rest of the tests. I
believe this change can save between 1 and 3 minutes on each of the
functional test suites.
Change-Id: I7519e8320aa16b57f09f633f866dc36cb494aa80
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478483
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
SC1083: This {/} is literal. Check expression (missing ;/\n?) or quote it.
This rule points to places that are part of command
and cannot be fixed:
1. git archive HEAD^{tree}
2. vpp (e.g. dpdk { no-pci })
Change-Id: I30117913f964415cdaed94d29b1209d119e4d5a4
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479986
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SC2097: This assignment is only seen by the forked process.
SC2098: This expansion will not see the mentioned assignment.
Apply these two rules together as they point to the same code.
Change-Id: I61020e8fd4b6db2b06ae8134d1004290a9bef9e7
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476777
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
FTL library is consuming whole OCSSD device
so punit parameter is not needed for bdev ftl
configuration.
Change-Id: I56f62ea6d09b3157b70c02ccfffcd3cb07ba4597
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467950
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This shellcheck case warns users when they use the pattern A && B || C
so that they don't accidentally try to use it as an if-then-else
statement. However, there is a valid way of using this pattern to
denote, do A, if it succeeds, do B, if either A or B fails, do C.
Change-Id: I283b433c15d07873befd182e8327f2e0602490aa
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476960
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Add an new RPC `framework_get_reactors` to retrieve list of all
reactors. Running threads on each reactor are included
in the output. Update jsonrpc.md and CHANGELOG accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I985d087dd41afe3033b7678af141ec8e5a2a822e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478027
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Removing hardcoded "-i 8" value for kernel NVMe-oF initiator
parameter "nr-io-queues".
This was previously merged by mistake and had to be removed
manually in test runs.
Change-Id: I454ad468863f93ac2ce93a1f0bd00f678ed4995c
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477766
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Move code around so that lines containing arguments
for constructors are better aligned with how they're
inherited.
Change nvmet_dir and fio_dir to nvmet_bin and fio_bin to
point directly to executable files. There is no advantage
in using directories.
Additionally fix how fio_bin (previously fio_dir) is passed
to parent classes - it was broken and caused exceptions.
Update README.md accordingly.
Change-Id: I10524593d543e236bf318a8cd51ea5375c334e8b
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477015
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds the ability to create bdevs on specified parallel unit
ranges on one OCSSD controller. It allows the user to create multiple
isolated bdevs, each operating on a separate set of parallel units.
To create a bdev on a specified range, a new parameter -r|--range was
added. For example:
rpc.py bdev_ocssd_create -c nvme0 -b nvme0n1 -r 0-4
will create a bdev on parallel units 0 through 4 (inclusive). If the
parameter is ommited, the bdev will span across all available units.
Change-Id: Icd94cf1e22fcc72806ef1ce1efd2d7031010009f
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469898
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
- Use "scsi" libvirt disk bus
generic/freebsd boxes do not boot with default
"virtio" bus
- Manually provision proxy settings
Proxyconf plugin seems to not work with generic/freebsd boxes.
Adjust shell and pkg proxy settings manually via scripts.
- Disable synced_folders provisioning
FreeBSD boxes don't have rsync and NFS installed by default.
Vagrantfile "synced_folders" step executes before "priovision"
steps responsible for setting proxiy settings, therefore we
are unable to install it.
Change-Id: I1386ec6e89cff6b8412e97e4df95a6149da2a02c
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477805
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Use bash -e option to exit from script if any error
occurs.
Change-Id: Ieaad74df4598e193f619947ad34d5a1fc572d1a9
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477453
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will enable us to create a helper applciation to print memory
statistics for a given SPDK application.
Change-Id: I0ad5a8163166a5d67d9a5533303ec0858297ba6b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477511
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Default emulator does not support OCSSD and Multi-namespace NVMe's.
Add if statement to check if user change emulator.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I30858bfed0c2e571c1aefa6ff7ccbf3bc436a294
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476454
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This patch removes posibility to set cuse device path. Instead
"/dev/spdk/nvme*" path is used.
Change-Id: I7c3087772a3661eebe03fce21356c35cc8204b49
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/474598
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Added a way to create and delete OCSSD bdevs on top of OC NVMe
controller. The controller can be created using the regular NVMe bdev
RPC call. For instance, the following (assuming 0000:00:04.0 is an
OC device):
rpc.py bdev_nvme_attach_controller -b nvme0 -a 0000:00:04.0 -t pcie
rpc.py bdev_ocssd_create -c nvme0 -b nvme0n1
creates Open Channel controller nvme0 and OCSSD bdev nvme0n1 on top of
it. The bdevs can be deleted either by the bdev_ocssd_delete call or by
deleting whole NVMe controller, in which case all bdevs are destroyed.
Change-Id: I9f2f02103fc5570a53bd26479c8690be206829c3
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468984
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This worked fine as-is with Python 3. But when
trying to run rpc.py with Python 2, it was noted
that simply doing print(ex) didn't print the message,
it needs to be print(ex.message).
Note that the similar code for printing the exception
message when running an RPC script was already doing
print(ex.message), so this change also makes the
code more consistent.
We aren't supporting or testing rpc.py with Python 2,
and there are some fairly significant mods required
to get it to work, but this small change at least
reduces that effort for those needing to implement
it and maintain it themselves.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0a6c94889dc631ef33835433f20f35ddc738aafb
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476633
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
When we get an error when calling an RPC, client.py
makes extensive use of the ** operator to add
the method and req_id to the params dict variable.
This doens't work with Python 2. We don't really
support Python 2, but there are at least some folks
out there who make their own mods to get rpc.py
to work with it. We can very easily implement this in
a way that is Python 2 friendly, so let's do that
to make it a tiny bit easier for those folks.
Incidentally, I do think the changes here also make
this part of the code a bit easier to read and
understand.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1846c80e21032ffba67128bee946b041a61d0621
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476632
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
SC2119: Use foo "$@" if function's $1 should mean script's $1.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I8366debbf83dfc8f3c1033e1e9fe3df17e45ab49
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476468
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Remove from shellcheck excluded SC2090: Quotes/backslashes
in this variable will not be respected.
After fix SC2089 this warning is not actually present in
any of spdk/spdk scripts.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ibe0015b569202eb7d3f3197f5c5630a67e701332
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476467
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Correct shellcheck rule SC2089: Quotes/backslashes will be treated literally. Use an array.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I40d4eef334cd030294669f8e8494f9e7a563d495
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476466
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Unify all distro selections to use the same generic/* source
for downloading boxes.
"generic/" is provided by Roboxes.
Change-Id: Id5d704e35313c382a564da2a50177766293a88c1
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476160
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
There is no "wheel" group on Ubuntu distros. Chown command
caused Vagrantfile to fail.
While at it - put the whole bash command flow into a variable
and run it as part of single "shell" provision step instead of
doing it in three steps.
Change-Id: I2853d4176f66f07f1762b339b20ced3386486f87
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476159
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Dash and double dash ("-" and "--") getopts params are safely
shifted using "shift" and "OPTIND". After that it's safe to
concatenate param array to string using "$*", especially that
there is only 1 positional parameter, which is distro version.
Previous approach ("$@" as array) made "export" impossible and
as a result VM was created with Fedora 28 distro on each run.
Change-Id: I48fa588220f8b7f46c561d480ee32920847c7903
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476128
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
It fixes change 474989.
"for blkname in $blknames; do"
was changed to
"for blkname in "${blknames[@]}"; do"
if blknames=" vda" then first blkname="" and
linux_bind_driver is called for vda although it has active mountpoint
Change-Id: I16d4379db274faa5703230072cfcf8d18a8ef5e6
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476061
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
SC2016: Expressions don't expand in single quotes, use double quotes for that.
We need to exclude this shellcheck because in some cases, for example in
test/vhost/common.sh we echo line to new script file.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I98d322d917cbda034787cb29a267b86a8ad7e7ec
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475713
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Correct shellcheck rule SC2012: Use find instead of ls to better handle non-alphanumeric filenames
Change-Id: Ibfc54ac06ae4cecadd22954159d259295f99912f
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475712
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Correct shellcheck rule SC2128: Expanding an array without an index only gives the first element.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I0e7c335af678114dc78dfb12a02369a69158e435
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/474989
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Current scripts/vagrant allow us to manual create every emulated device.
This patch allow to automatic create whole emulated disk while we
create virtual machine.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: If772adc282c4f6d94dab5eb7337f097a08f708e9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475070
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Current scripts/vagrant allow us to create only a single file for
emulating NVMe with single namespace.
This patch allow to create multiple emulated drives with multiple namespaces.
This patch also allows to emulate OCSSD disks which are used in OCF tests.
Change-Id: Ia7a4667bd405ba18235e72bcdf608270002b5242
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466555
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
I am confused with the dev_backend variable, I think that
we may not need this variable.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I26fa5e8a829e574bb1b97add753b21ad1b0fc23e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473910
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is fix the issue on fedora30 about ceph-14.*.*.
Our ceph setup is a simple or demo case for rbd creation.
Make this script can run well on all versions.
Unify the filesystems about filestore and bluestore. That
all versions' logs seem similar.
We can trace the log through file:/var/log/ceph/ceph-mon.a.log.
It can record the whole processes.
osd.0 [v2:127.0.0.1:6800/2770008,v1:127.0.0.1:6801/2770008] boot
osdmap e5: 1 total, 1 up, 1 in
fix issue: #980.
Signed-off-by: dongx.yi <dongx.yi@intel.com>
Change-Id: I594fdab791fdc6af6df739dacef4648e396e3d35
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473831
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The block size of non-disk files can't be automatically detected,
so add an argument to specify it.
Signed-off-by: Yao Liu <yotta.liu@ucloud.cn>
Change-Id: Ia11ab177b78c66ede4a09a997bba28827d83ec25
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473607
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Remove from shellcheck excluded SC2142: Aliases can't use
positional parameters. Use a function.
This warning is not actually present in any of spdk/spdk scripts.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I0af375c062724dc8fcee5a6cd4b8ac99bda260ac
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473292
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Correct shellcheck rule SC2140: Word is on the form "A"B"C"
(B indicated). Did you mean "ABC" or "A\"B\"C"?
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I1655b2e76be7a5e3d615c5b34c5af9e4012ac49f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473291
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Corrected code in some files.
Most of cases cannot be corrected as we use global variables
defined in other files.
SC2154: var is referenced but not assigned.
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Change-Id: Id333587f81b0bc2456b0c97bac5343a8e5a22774
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472342
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Correct shellcheck rule SC2124: Assigning an array to a string!
Assign as array, or use * instead of @ to concatenate.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Id74c55b7e1c41b6469e84ac388cf8a5bd8e562a6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473276
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Remove from shellcheck excluded SC2121: To assign a variable,
use just 'var=value', no 'set ..'.
This warning is not actually present in any of spdk/spdk scripts.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I7dae1d73f0e276ef9e5a0cfa78a56227264c0a4d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473272
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Use python3 when installing devstack.
Increase timeouts in order to tests pass in our CI environment.
Change-Id: I6b88e39f9a8f0b8aa255098dc62b881168777ec3
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472921
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This RPC method can be used to set cache size of
blobfs, in case a smaller or larger memory scale
is requred by cache pool.
Change-Id: I8046c7caeaa15c67825f86d14ae0b79395d51daf
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471870
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We don't use shebang for bash's scripts that are not executable.
SC2148: Add shebang to the top of your script.
Change-Id: I4bd6868a55ec88ae1edaf0883c8600b65fcdcce2
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472609
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Can only return 0-255. Other data should be written to stdout.
Change-Id: Idb8b387f438121e6b6afe62840ddee752872d7d7
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472605
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SC2153: Possible Misspelling: MYVARIABLE may not be assigned, but MY_VARIABLE is.
Change-Id: I6c06b82bb8de0ad42162d8fe8ee6aabcfb9534b5
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473141
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
According to my check, I found that we should
umount /dev/loop200p2. The name of the dev used in the
start.sh and stop.sh is not same.
Then there an issue reported in the script:
umount /dev/loop200
umount: /dev/loop200: not mounted.
I think that this is an issue happens in our every
test. And it may influence the further test.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I10c460b4e7760f321fd1a1cd87caa69d2911037b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472514
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add to permanently excluded in shellcheck:
SC2164: Use cd ... || exit in case cd fails.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ic8091de0cdc7bba441ea1715699ca5bd170ece59
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472176
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Also add functions to convert it to/from string.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I6f7964d832c308b815150fff39eb3dc5c5ae5853
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471079
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Added RPC commands to register/unregister CUSE devices
to NVMe controllers:
- bdev_nvme_cuse_register
- bdev_nvme_cuse_unregister
Additionally two RPC now return CUSE device names:
- bdev_get_bdevs for namespaces
- bdev_nvme_get_controllers for controllers
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I69c4bf41ec8f78a7522894268a67dd733881712f
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472211
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
NVMe character device implementation. This patch adds implementation
of IO producer using CUSE library. It allows to create nvme device
nodes in linux kernel for controller as well as for namespace and
process ioctl requests as usual from linux environment.
Both devices (controller and namespaces) are exposed as character
devices.
To compile NVMe CUSE module use "./configure --with-nvme-cuse".
Names for created CUSE devices can be retrieved using
spdk_nvme_cuse_get_ctrlr_name() and spdk_nvme_cuse_get_ns_name().
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I0fc9a9a1ef3c9c2b3112d07c2b4b1f8d49665ee1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466917
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Remove from shellcheck excluded SC2165: This nested loop
overrides the index variable of its parent.
This warning is not actually present in any of spdk/spdk scripts.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Idbef5f5e11467e389c7b965bb394a71d2d0d2566
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472174
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Correct shellcheck rule SC2166: Prefer [ p ] && [ q ]
as [ p -a q ] is not well defined.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I3fb2fb0e790bbdd296b64673c301324632d7c37b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472173
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Remove from shellcheck excluded SC2167: This parent
loop has its index variable overridden.
This warning is not actually present in any of spdk/spdk scripts.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I066f7fa856581377ee8370ebe9167841a18b0787
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472172
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Remove from shellcheck excluded SC2230: which is non-standard.
Use builtin 'command -v' instead.
This warning is not actually present in any of spdk/spdk scripts.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I1e535b44ea54999736206aeb3906ce3cf670bc21
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472171
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Correct shellcheck rule SC2115: Use "${var:?}" to
ensure this never expands to /* .
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I4a6beef338b7a3c496f1b74a0cdbbdff83403ddc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471464
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Correct shellcheck rule SC2103: Use a ( subshell ) to avoid having to cd back.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I474e11f5753c3482c7924548ab7c0183d4ac419d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471437
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
/etc/ceph/ceph.client.admin.keyring is used by
the liborados client, if keyring is udpated, we should
update this file.
If we see:
librados: client.admin authentication error (1) Operation not permitted
Usually, we should set the read privilge for the file.
Change-Id: I34967844a5d0578f740e601def4b0cbd297a95dc
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471947
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add rpc commands bdev_opal_lock_unlock, bdev_opal_new_user.
Admin can add new user for opal bdev created and the user can
lock/unlock the bdev by himself.
Change-Id: I9a1e360399617b5a039dc5353097ab525c7eb964
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471475
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fix Python code for warning produced by pylint.
- C1801: Do not use `len(SEQUENCE)` to determine
if a sequence is empty (len-as-condition)
- W0611: Unused import * (unused-import)
- C0411: standard import should be placed before X
(wrong-import-order)
- C0411: third party import X should be placed before X
(wrong-import-order)
- C0412: Imports from package X are not grouped
(ungrouped-imports)
- W0212: Access to a protected member _exit of a
client class (protected-access)
Change-Id: I2c0e8379f962eb2957b428617836867b2e725aeb
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471482
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This path updates ocf library to version 19.06 and also introduces
all necessary changes required to integrate ocf bdev adapter with
new version of ocf.
Summary of changes introduces with new OCF in ocf bdev:
- ocf_env.h increased limit for memory operations, changed behaviour
of strncpy to less restrictive, both changes are required to run new OCF
- ctx.c changed functions to new from new OCF
- added new cache mode "write only"
- added missed cache modes wa and wi to RPC scripts
- rewritten spdk_rpc_bdev_ocf_get_stats function to use asynhronus
ocf_mngt_cache_read_lock
- used new asynhronus ocf_mngt_cache_flush instead of waiting for request
- removed no longer valid filed - cfg->device.min_free_ram
- changed expected result in metadata_probe_cb
Signed-off-by: Marcin Dziegielewski <marcin.dziegielewski@intel.com>
Change-Id: I83e4335e16600e4d22e6bb517931102de42d39e9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468132
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Correct shellcheck rule SC2013: To read lines rather than
words, pipe/redirect to a 'while read' loop.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I01c0dcf045fc131ce0cfa672e5ede0b881a47406
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471433
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When used mkdir with -p, -m only applies to the deepest directory.
Change-Id: Ibbc2dc47cdae82d38e3141c8a7df59ed709fe334
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468367
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Correct shellcheck rule SC2145: Argument mixes string and
array. Use * or separate argument.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I45102ead2e97cc1d6b11c21f269e58a235055c35
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470926
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Remove from shellcheck excluded SC2146: This action ignores
everything before the -o. Use \( \) to group.
This warning is not actually present in any of spdk/spdk scripts.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I62549107516853d8394fff8bcb36584df9e39ac1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470924
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Remove from shellcheck excluded SC1001: This \o will
be a regular 'o' in this context.
This warning is not actually present in any of spdk/spdk scripts.
Additionally clean up shellcheck exclude list.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ia9a9ec9383df02702397072172830fb147effe81
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470913
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Remove from shellcheck excluded SC1003: Want to escape
a single quote? echo 'This is how it'\''s done'.
This warning is not actually present in any of spdk/spdk scripts.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ib5175941178e4d1b46c3835a98d90d6dd427a035
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470912
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Remove from shellcheck excluded SC1113: Use #!, not just #, for the shebang.
This warning is not actually present in any of spdk/spdk scripts.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I77cc1bd3ca6817823bf6fabf82a2991d734cd824
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470906
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Add to permanently excluded in shellcheck:
^SC2001: See if you can use ${variable//search/replace} instead.
In some cases we need more complex sed substitution than only replacing string.
For example: test_stack=$(echo "$test_stack" | sed -e 's@;[^;]*$@@')
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I3e997af5232d8b15518fd54528b2e51e75a19d8c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470903
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Correct shellcheck rule SC2003: expr is antiquated.
Consider rewriting this using $((..)), ${} or .
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I98a677cce7a1ffdfa5e1cf417a128900fba64124
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470902
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Correct shellcheck rule SC2044: For loops over find output
are fragile. Use find -exec or a while read loop.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I3fd84ab60daab7c6971769ff4dee8a24d5d3e1bb
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470746
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
1. Remove created dir name with "/".
2. Compatible with upper version of ceph-authtool without --set-uid, let it run as default.
3. Fix error on ceph 12.*.*
This is to fix issue #980 which blocks by ceph-authtool.
If there's still other issue, should append fix.
Change-Id: Icd7fb4177a75a731ae3d4d5fc51cef16eeab282f
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470915
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Quote to prevent word splitting/globbing,
or split robustly with mapfile or read -a.
Change-Id: I8d971216056580921ce07baa24e6ceaceffcceae
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467679
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Prefer mapfile or read -a to split
command output (or quote to avoid splitting).
We know the behaviour of commands that break the SC2207 rule.
They shouldn't invoke the shell's sloppy word splitting and glob expansion.
E.g. Code: stats=($(cat /sys/block/$dev/stat))
according to SC2207 rule could look like:
IFS=" " read -r -a stats <<< "$(cat /sys/block/$dev/stat))"
Stat file contains one simple line with entries separated by commas
so present code is enough to define statistics for dev.
Change-Id: Ia929d76461c9fcff425f69d2faf4405631e60239
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467325
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There was no occurrences in code that doesn't meet this rule
SC2231: Quote expansions in this for loop glob
to prevent wordsplitting, e.g. "$dir"/*.txt .
Change-Id: I9293459dd6bea401f675a7af379db25f48664f25
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469106
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This rule won't be used in bash scripts and will be added to exception list.
SC2223 - This default assignment may cause DoS due to globbing. Quote it.
Change-Id: I0d4b0bc697e42bb4bc1d77db5b28a469cdb887ec
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466836
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This RPC method will mount blobfs on bdev to one host
path through FUSE. Then on the host path, user can
directly do some file operations which will be mapped
to blobfs.
Note:
* The FUSE mount of blobfs can be umounted directly by
SHELL umount or fusermount command.
Change-Id: I7c322d978b39bbc7255fced345a749ad5bfa7077
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468777
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This case is not specified by getopts.
Change-Id: Id292af4f926856af849d2f97fd0a570e4505832b
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467288
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Correct shellcheck rule SC2043: This loop will only ever
run once for a constant value. Did you perhaps mean to
loop over dir/*, $var or $(cmd)?"
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: If8de0a81ea889a04b8fea646fedc0a2cfe49d5f7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470737
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There was issue with failing rbd_autotest on vm fedora29.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ic8db722903d483d288b62c8b7c54671a4142be01
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470855
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Added Initiator configuration option to point to the
fio source directory used when compiling SPDK with the --with-fio
option and run SPDK test with the fio plugin.
Signed-off-by: John Kariuki <John.K.Kariuki@intel.com>
Change-Id: I097cb17691a72d7c2a0e198dccd12cf3d1c3474c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468890
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
In a couple of docs and a .py file, saw while reviewing name changes.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I6a8b579ca692cdf6df1024e42eee76de5bde1227
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467715
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Use semicolon or linefeed before 'done' (or quote to make it literal).
Change-Id: I90c01e643fae41dd9961f2314a076a0bac1e6aff
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466904
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Remove from shellcheck excluded SC2039: In POSIX sh, something is undefined.
This warning is not actually present in any of spdk/spdk scripts.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I473e9307d909695184969563ef082720fa593759
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470732
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Correct shellcheck rule SC2035: Use ./*glob* or
-- *glob* so names with dashes won't become options.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: If41cc6c4571b78ab7533a8156239bc879fab0216
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470731
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Remove from shellcheck excluded SC2031: var was modified in
a subshell. That change might be lost.
This warning is not actually present in any of spdk/spdk scripts.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I17ec872ee5571089bbe40e8d51b06d70be70feb2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470729
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Remove from shellcheck excluded SC2030: Modification
of var is local (to subshell caused by pipeline).
This warning is not actually present in any of spdk/spdk scripts.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I3bcf6857a9fa5edfcdfa1b7f13eb704ac552d3f7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470645
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Following test/blobfs/mkfs case, add it as one RPC
method to let build a new blobfs on given block
device.
Change-Id: I0ffbb1add95dfbc8655e0238ed6f3cd519dd945b
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466485
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add module blobfs_bdev as a general module to simplify
the operations of blobfs on bdev. Then its functions
can be utilized by other libraries or apps.
blobfs_detect can be used to detect whether there is
one blobfs on given bdev.
Change-Id: Ib425574816061dc945fb652b539f791a44097a43
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466486
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Variable was used as an array but is now assigned a string.
Change-Id: I79e59d80be96657a9c2fc66f9d205458f9db67b2
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468366
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Check exit code directly with e.g. 'if mycmd;',
not indirectly with $?.
Rule disabled in test/pmem/common.sh as behaviour
may differ depends on bash version
Change-Id: Ied4c5dfb09e52c5db08becf1ad69a29a1bda426b
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468363
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Remove from shellcheck excluded SC2015: Note that
A && B || C is not if-then-else. C may run when A is true.
This warning is not actually present in any of spdk/spdk scripts.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ie8ac6c83dc2d79a06e3b8ebb6ec8ebfec4fa7561
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470129
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Correct shellcheck rule SC2018: Use '[:lower:]' to support
accents and foreign alphabets.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: If11d20a36419366adafc19f173ebbec60b2bea77
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470109
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Correct shellcheck rule SC2019: Use '[:upper:]' to support
accents and foreign alphabets.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I9fbaa22ee39d52d5d3a9397ad007b7df295b49b3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469990
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Correct shellcheck rule SC2022: Note that unlike globs,
o* here matches 'ooo' but not 'oscar'
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ie201a8401c5c501e1fff3d0eb71409163893768e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469983
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Remove from shellcheck excluded SC2094: Make sure not
to read and write the same file in the same pipeline.
This warning is not actually present in any of spdk/spdk scripts.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I3fba44d7dc677dbfb4a7964481a7f0661a733dcf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469979
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add to pernamently excluded in shellcheck:
*SC1090: Can't follow non-constant source. Use a directive to specify location.
*SC1091: Not following: (error message here)
We don't want to put commnets in lines where we refer to some sources.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ida7a8924901649d270ed5384677ee23f206da9f1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469870
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Correct shellcheck rule SC2088: Tilde does not expand in quotes. Use $HOME.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Iea1eeaafc414c153f60634aaa39b0ab3272c9c48
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469836
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Remove from shellcheck excluded SC2059: Don't use variables in the
printf format string. Use printf "..%s.." "$foo".
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ibe44ed313cc31ddc346752de19ed4759c207bb01
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469824
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ib9bb2de327a3461081f5f0dfc359b53f61019e28
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468133
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Add an new RPC iscsi_portal_group_set_auth. This RPC overwrites
the setting of CHAP authentication for discovery sessions by the
global parameters specific for the portal group.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I01578b2d01e3dbed599db10340d5053fb0a3738d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469369
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Correct shellcheck rule SC1004: This backslash+linefeed is literal.
Break outside single quotes if you just want to break the line.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I7b872fa3c66685c1e8e7989f7b3b74a9e4f35325
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468467
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Remove from shellcheck excluded SC2048: Use "$@" (with quotes)
to prevent whitespace problems.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ib9d4b538c442450c6743f749016be4811981cff4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466903
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Remove from shellcheck excluded SC2026: This word is outside
of quotes. Did you intend to 'nest '"'single quotes'"' instead'
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ic71c464de9dccebe9ead9c47b5cdb15d8fcc025b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466902
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The = here is literal. To assign by index, use ( [index]=value )
with no spaces. To keep as literal, quote it.
Change-Id: I14cada0e8c132286959aa47a1d37ede5e025d85f
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467863
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also update the changelog for the previous few changes.
Change-Id: I79ac330b4992ccc3e41fd1643b09128c6de6c86d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468391
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Since the in tree applications don't really support these RPCs, keep
them out of rpc.py. We can add them in after the applications have been
modified to support that functionality.
Change-Id: I7aae2c623b6da48374fe53f8b9471b08e5f0af7a
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469324
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This rule doesn't appear in scripts.
SC2195: This pattern will never match the case statement's word.
Double check them.
Change-Id: Ie3cabd58639ca733b750fdbc3ae3d476f083b792
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469187
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
SC2192: This array element has no value.
Remove spaces after = or use "" for empty string.
Change-Id: I5228df2ac292786a3a62aa06ffb6cd31b7d3b6c4
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467861
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Arrays implicitly concatenate in [[ ]].
Use a loop (or explicit * instead of @).
Change-Id: Ib3ac2c65207dfc30aad6117cc4996cdc105f5079
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467858
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
used for creating a new spdk_nvmf_tgt structure in the application.
Change-Id: Ib0182ea6d935b84b4fe4fcad79e173cb46859669
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468387
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Adds an option to spdkcli.py to allow connection over a tcp
via a host address and port. These options match the format
that exists in rpc.py
Signed-off-by: Mike Carlin <mikefcarlin@protonmail.com>
Change-Id: I7e9e1c376546dd765ffd6f4f4db88e193e9aa0ef
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467844
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use var=$(command) to assign output (or quote to assign string).
Change-Id: I4067db46697c32f24e0b4df7d573929ee75757a7
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467291
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add SPDK dependency installation instructions for ArchLinux OS.
When possible dependencies are installed directly via pacman
package manager. If not available - use AUR and makepkg.
One exception is pmem dependency which is installed using
Github sources, as it seems that AUR repo is not frequently
update.
Additionally for pmem installation ldconfig needs to be
updated manually, otherwise it will break fio installation
(if done with vm_setup.sh) which detects pmdk headers, but
cannot find libraries on runtime.
Change-Id: Ib9045ba55b10c2b671e01b48dda8ec439899bc06
Signed-off-by: Kay Bouché <kay-b@live.de>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/433913
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add Arch Linux option to our Vagrant scripts.
We will probably need this for nightly tests against
latest versions of software we depend on.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I2dd1d69cbb286625343fd5e70ace0d8da1218825
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466832
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
We want to use Vagrant scripts in our CI.
It will allow us to remove statically configured
virtual machines and spawn new instances dynamically.
This patch allows us to use custom version of emulator
instead of preinstalled on host.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Iff79cd28d4d5b21fcf327db455ef060182f0f4ef
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465925
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
The unit test mock macro function doesn't mesh well with the scan-build
static analysis tool. So we need to reset cc to the user provided value
or default before running the unit tests.
Change-Id: Ib636f6e396b09f9bf1cb8f930e6befa56ce99848
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466816
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Invalid flags are not handled. Add a *) case.
Change-Id: Ib3e0d978ed9a131a5ab23a2bc5013bbe0698d1be
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467268
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The dependencies between vhost and rte_vhost were not added during
earlier changes. This change moves the rte_vhost directory up to the
level of the other libraries and adds the proper dependencies for when
it is linked.
Change-Id: I089de1cd945062b64975a0011887700c0e38bb0f
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467700
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fix SC1087: Use braces when expanding arrays,
e.g. ${array[idx]} (or ${var}[.. to quiet).
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I0ffa91da9847ee0805b664cba573346ab5b83f3a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466898
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It will allow to return list of RPC with aliases.
Change-Id: Iee6be1a6f4e78a11e5b81e4a7298e32851e7920c
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465926
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
In the event that our fuzz test passes, we should manually remove the
trace files from the /dev/shm directory. This will prevent us from
failing to allocate /dev/shm files when a machine consistently passes
the tests and doesn't reboot.
Change-Id: I2ccde6aba7d61fda3a28ed24e009c6f8f81c20b4
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465996
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK/DPDK startup time can be very important - especially
in secondary processes. If DPDK cannot figure out the
TSC via cpuid or rdmsr, it will instead use a 100ms sleep
to calculate the TSC. On Fedora kernels, the msr module
is linked into the kernel, enabling rdmsr and bypassing
this 100ms sleep. But on Ubuntu kernels, the user must
explicitly load the msr module, otherwise it will incur
the 100ms sleep.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I779f023bb1681570da81c99cefa66debf3e1adc6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465711
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The previous patch in this series introduced the notion of an
orphan comp bdev which is available only for deletion due to
a missing PMEM file. This RPC allows applications to list
orphaned comp bdevs as they will not show up with get_bdevs
because they are not registered bdevs.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I431f9cdebd4e5ae6068308639cb41d6c52f7309b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465812
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
All of the RPCs in lib/nvmf/nvmf_rpc.c rely on knowing which nvmf_tgt
they should work with. They have historically relied on the assumption
that there will only be a single target in a given application. This is
true for the example application in the spdk repo, but it is not
necessarily true generally,
By adding an option tgt_name parameter to the RPCs we enable them for
multi-target NVMe-oF applications. We also further reduce the coupling
between the library and the example application.
Change-Id: I03b6695da05a42af3024842ed87d2ce2c296f33f
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465442
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
So, in an attempt to be a “good SPDK citizen,” when I noticed that
check_format.sh suggested I install shellcheck, I did and re-ran
my commit.
Got bunches of errors like this on unmodified SPDK bash scripts:
In scripts/ceph/start.sh line 58:
echo -e "\tosd data = ${mnt_pt}" >> "$ceph_conf"
^-- SC1117: Backslash is literal in "\t".
Prefer explicit escaping: "\\t".
Adding SC1117 to the list of ignored warnings lets check_format
run clean.
ShellCheck is at version 0.5.0, Ubuntu at 19.04.
Signed-off-by: James Bergsten <jamesx.bergsten@intel.com>
Change-Id: I1705b3d15338a18a3fde3ae796a7c46bbf92b1cd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465448
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The fact that all latencies were in microseconds was not explicit in all
of the help/docs for this bdev.
Change-Id: Id13fbb55af62c5f14fd2790e894c4c0646eb25f7
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465169
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is patch that implements changes according to proposal
submitted in https://review.gerrithub.io/c/spdk/spdk/+/453036
Change-Id: I5423cd34cb5fc111b34cab2b7f7c6c5f11898af8
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464677
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fix SC2064 issue.
Use single quotes, otherwise trap expands now rather than
when signalled.
Change-Id: I0b3a9157f52eed037e8d217f639c64d6876ec1e1
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464655
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
This will allow us to do interesting things in tests like configure a
bdev with a really long delay, and allow I/O to build up on a target to
see what happens, then decrease the latency to allow traffic to flow
through normally without ever having to delete and reconfigure the bdev.
Change-Id: Ibcb1101f8eed9fe3094ba239110cb4e49ace6554
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464454
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fix SC2007: Use $((..)) instead of deprecated $[..].
SC2007 removed from check_format.sh exclude list.
Change-Id: Ifd858857e461d785d6d6f101acca13c326ee637e
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464172
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fall back to tty output in case diff cannot be used for
not auto-fixable errors.
Change-Id: I481ad0dbe8e42cf510fa3a02636bc0117630da14
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464171
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Removing parentheses around if condition.
This unnecessarily spawns a subshell.
Removing SC2233 (Remove superfluous (..) around condition)
from check_format.sh exclusion list.
Change-Id: I0a4c266667264220a898ce80f587ae61bc113821
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463627
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Changing according to styling check done by ShellCheck.
Removing from check_format.sh exclusion list:
SC2236 - Use -n instead of ! -z
SC2070 - -n doesn't work with unquoted arguments. Quote or use [[ ]]
Change-Id: Ia9d645b9d0ce31b67c4de682395cf36f4ddc8d1f
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463180
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fixing errors reported by ShellCheck:
SC1009: The mentioned syntax error was in this if expression.
SC1073: Couldn't parse this test expression. Fix to allow more checks.
SC1019: Expected this to be an argument to the unary condition.
SC1020: You need a space before the ].
SC1072: Missing space before ]. Fix any mentioned problems and try again.
Removing mentioned errors from check_format.sh exlusion list, as
all of these errors should be tested for regularly.
Change-Id: I19402baba7bb8e59ed707de97133bd0a579333cf
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463174
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Fix shellcheck styling error SC2006. Use of backtics is deprecated
and dollar-parentheses are encouraged instead.
Removing SC2006 from check_format.sh error exlusion list.
Change-Id: I8ef9d782839ff4361386720c39a28e449b5efab9
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463801
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add Bash styling checks using shellcheck:
https://github.com/koalaman/shellcheck
Shellcheck can be used in check_format just like astyle
and pep8 to improve our bash scripts quality by checking
for syntax errors.
It could also allow us to enforce (at least to some
extent) consistent coding style - using $() instead of
backticks for command calls, string quoting, etc.
Shellcheck maintains it's own wiki with error descriptions:
https://github.com/koalaman/shellcheck/wiki/
To check for specific error go to, for example:
https://github.com/koalaman/shellcheck/wiki/SC2006
Each wiki entry includes an example of problematic code, an
example of suggested correct code and a rationale.
Currently all of the found problems are excluded in check_format.sh
and will be fixed incrementally.
Change-Id: Ib1d6f628e101e0e2b2d56956b679942630a73f95
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463172
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add shellcheck package for bash syntax and styling checks.
Enabling in check_format.sh done in separate patch.
Change-Id: I654f4168d5fab55dc7e1eeaa353ea6da24d04dd7
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463866
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Connections will soon be assigned to poll groups, which will be
dynamically moved between CPU cores based on load. It no longer makes
sense to restrict certain portal groups to specific cpu cores in this
model.
Change-Id: Iee983d75febc9797aa60021c5bc0680335e895cd
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463358
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
A single I/O may allocate more than one request, since splitting may be
necessary to conform to the device's maximum transfer size, PRP list
compatibility requirements, or driver-assisted striping. Very big
I/O request sent from application may get error due to limited resources
in NVMe driver layer, so here we add an optional parameter to make the
parameter can be configured by users.
Fix issue #745.
Change-Id: I7824232c54865b052dcd0ec6e91484c3837fc2c4
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461182
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
On multiple development systems (including mine), this results
in new error messages when running scripts/setup.sh. This has
the potential of causing lots of questions when users upgrade
to SPDK 19.07.
I understand the desire for the error messages, but I think we have
to come up with a smarter check than just against "unlimited".
This reverts commit 0abee610f0.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2854af556b67a9a4e5f686c72c4407962808f964
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463357
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This internal tool can now be passed an optional --cross-prefix,
which sets up the prefix used for a cross compiler.
Change-Id: Ia4bbbae3bd5a2e4ddc9da342cd03d600e9ee6099
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463016
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We need to know this up front.
Change-Id: I3a9ceb90cf62eacbf3fdf518a9ccb4c4978b3a05
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463014
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Arguments for this function were added as optional arguments
and were listed as such by argparse when using rpc.py --help.
This is confusing as all of these arguments are obligatory
in order to create a crypto bdev in SPDK configuration.
Change-Id: I7c31413314f28e44ee008d3d7c28759063700b61
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460968
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Added parsing and saving of (optional) parameters which are responsible for
relocation in FTL. Changing the parameters may affect Write
Amplification Factor and overall performance, especially during random
write workloads. If parameters are not specified, default values will be used.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: Ic0229e39109460f3541c31e1cbf2a485efe408c6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460504
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Catch exceptions during RPC client initialization
to display meaningful error message.
Withouth this change, user gets stacktrace
when e.g. SPDK application is not running.
Before:
```
Traceback (most recent call last):
File "scripts/rpc/client.py", line 53, in __init__
raise socket.error("Unix socket '%s' does not exist" % addr)
OSError: Unix socket '/var/tmp/spdk.sock' does not exist
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "scripts/spdkcli.py", line 74, in <module>
main()
File "scripts/spdkcli.py", line 47, in main
with rpc.client.JSONRPCClient(args.socket) as client:
File "scripts/rpc/client.py", line 56, in __init__
"Error details: %s" % (addr, ex))
rpc.client.JSONRPCException: Error while connecting to /var/tmp/spdk.sock
Error details: Unix socket '/var/tmp/spdk.sock' does not exist
```
After:
```
Error while connecting to /var/tmp/spdk.sock
Error details: Unix socket '/var/tmp/spdk.sock' does not exist. SPDK not running?
```
Change-Id: I65862965b68acf3bd4709de598f04de49da27de2
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462020
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
RPC client constructor accepts optional port,
but does not check if it's None in case of
remote connection.
This patch adds the check and new error message
related to it.
Case where port is unexpectedly None
can be reproduced by starting spdkcli
when SPDK socket does not exist.
Change-Id: I46e0b99547204c6fdeac421e5de9d6991387e207
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460974
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This priority is used to differentiate the sock priority on the TCP connections
between NVMe-oF TCP target and other TCP based applications.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I6ee294e647420b56d1d91a07c2e37bf34ce24e03
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461801
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
JSONRPCClient.call recieved optional `params` value,
but then `params` was used in `json.dumps` function (line #159)
as a dictionary, so `None` was treated as dictionary
in some cases, which resulted in TypeError.
This patch fixes above issue by changing
the default value from `None` to `{}`.
Change-Id: I27ca0ccc2d970c0ff9e8117f02203c03e417adf0
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462070
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Currently we do not switch driver for NVMe that is mounted.
The problem is that we take into consideration only the
first namespace, but any other namespace can be still mounted.
In such case we should not switch driver.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Idd13edccd0929574f2914a71e841e67871dd2e9f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457762
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Purpose: To eanble the transport based scheduler in RPC.
Previously, we only support it with configuration file.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I02ae9b1b316d4fec8b28b550e70dcdc78ce78722
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461645
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This option was intended to enable the user to disable the c2h_option,
but because of the way arguments filter down through the python script,
it was actually impossible to disable the optimization.
My understanding is that typically we will want to keep this
optimization enabled on most systems, but the option should work like it
says it does.
Also, align the implementation of this function with the other ones on
the RPC i.e. use the store_true, store_false paradigm.
Change-Id: I59f0e9a573abf1d567e5539294c63c68899b35f1
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461737
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
`pmem_pool_info` was incorrectly set to invoke
`delete_pmem_pool` RPC method.
The name of command was also incorrect - "info_pmem_pool"
instead of "pmem_pool_info", where
latter is the original name of RPC method.
This patch fixes both issues with `pmem_pool_info`.
This bug has not been caught because
there are no tests for `pmem_pool_info` command yet.
Change-Id: Icc207bc3a7cf6c817cb079137d7b473f52186a84
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460840
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This patch adds nvmf_get_stats RPC method and basic infrastructure to
report NVMf global and per poll group statistics in JSON format.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I13b83e28b75a02bc1dcb7b95cbce52ae10ff0f7b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452298
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This patch excludes *.patch files from some checks in check_format.sh:
- trailing spaces,
- POSIX includes
Change-Id: Ic55ce7f4128ddc946d235b4ca487061075edc03b
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460939
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Add an new optional parameter dif_insert_or_strip to
nvmf_create_transport RPC.
.INI config file will be deprecated and dif_insert_or_strip is not
supported in .INI config file.
Change-Id: Ibf38b599cff75eeb0056dd2125d6ec10d444f339
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458927
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Scripts were using a mix of two approaches, lets unify that so
just dollar-parenthesis syntax is used.
Also update two scripts from spdk/test which we previously missed.
Change-Id: I429f9bc158076462b419fae597f716c329f9b7aa
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460344
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There will be one more "mocked" implementation soon,
so make existing names more descriptive now.
Change-Id: I30daf2b60ab683d5befb06eca50d455712858d61
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459390
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The previous name wasn't very accurate. The function
accepts a json object, so call it print_json().
Change-Id: If1cae587fd13f0a8a2761049125fc7fb234c0360
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459388
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Also, construct this path by grabbing the home directory
of the current user.
Change-Id: Ia8d5cc2be40c0c3ac693c80a3132b970f7124183
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456704
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Changed initialization of the ftl lib when using an rpc call to
allow for usage of any default configuration parameters (currently
only allow_open_bands is exposed).
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I73457dfcacc6b1adeffd13ecc6e98001749e00cf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459741
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
By default QAT will be selected if available however a new RPC
can be used to either auto-select (default) or specify either
ISAL or QAT.
Change-Id: I37cf7640bbd8cef455583e1eccb8adb59cc419d8
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456693
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
By now (5.1 is released), the Linux kernel initiator supports the
success optimization and further, the version that doesn't support
it (5.0) was EOL-ed. As such, lets open it up @ spdk by default.
Doing so provides a notable performance improvement: running perf with
iodepth of 64, randread, two threads and block size of 512 bytes for 60s
("-q 64 -w randread -o 512 -c 0x5000 -t 60") over the VMA socket acceleration
library and null backing store, we got 730K IOPS with the success
optimization vs 550K without it.
IOPS MiB/s Average min max
549274.10 268.20 232.99 93.23 3256354.96
728117.57 355.53 175.76 85.93 14632.16
To allow for interop with older kernel initiators, we added
a config knob under which the success optimization can be
enabled or disabled.
Change-Id: Ia4c79f607f82c3563523ae3e07a67eac95b56dbb
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457644
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Removing Fedora 26 and 27 which are long past their EOL date.
Adding Fedora 29 and 30.
Change-Id: I35bc8b7a5ac693b7a5af0e6abb35869b18ed5777
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457924
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The next patch in this series introduces and RPC that makes the
selection more flexible.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I55617d3c37b51cf9474c358cb92f5218397c0c58
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457157
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Report issue on ubuntu18 :
"spdk/autobuild.sh: line 55: hash: scan-build: not found"
Check that ubuntu18 should install this package:
apt-get install -y clang-tools, to fit version of ubuntu18
and later.
Move clang-analyzer which for fedora to vm_setup.sh as well.
Change-Id: Ia702c492f8b0f64705c7c15ee57a861ca14521f9
signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457554
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Missing try-except block around call_rpc_func().
If called function returned error there was an uncaught exception
which resulted in backtrace printed to screen.
Change-Id: Ifb37c29d70b93ef648a0503643a51cc1967ef8d0
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456956
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Gives the ability to change behavior of restore after dirty shutdown
without recompiling ftl library. User can define if partial recovery
or error should be returned after such a scenario.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I6dda40df7b92d6a377957e4a70a3eab91a6ac4a9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456185
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Make construct_ocf_bdev call accept 'wb'
as allowed cache mode.
Previusly user could only create OCF bdevs
in WriteThrough or PassThrough modes.
Change-Id: Ic2e1c8d2905cb51fc13c080aa7b7a4dfd7d9387f
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455628
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This change will allow easier debugging of
what parameters are sent to spdk target.
It will also help to analyse which commands will fail
if multiple commands are sent to rpc.py.
Change-Id: I8e75b5edce791a1fc41e83664add8893f4c1bbfb
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455636
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This script was getting a bit unwieldy. adding argparse will make it
easier to add more options in the future or to set default values and
validate arguments going forward.
Change-Id: I1ffdbdf2082287ceb8a88cd3eb6ecf9bbd6c9e11
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455724
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This module simply sits on another virtual bdev
and adds a simulated average and p99 latency to that drive.
Change-Id: Ie9fc91e27585fd0636cb7dc845cb41744bf24625
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453594
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Fixed the following:
1) Missing python paramiko module in package dependecies.
2) Paramiko connection error: TypeError: missing_host_key() missing 1 required positional argument: 'key'
The set_missing_host_key_policy call should take a class instance AutoAddPolicy(), instead of the class name.
3) JSON config file defines "rdma_ips" instead of "nic_ips"
4) Added result file location in the documentation
5) Added env variable for PYTHONPATH to documentation
6) config.json changed default rw to randrw instead of read
Change-Id: I96624e2912131f62254c684a6c03a53a7f806cde
Signed-off-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455285
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Liang Yan <liang.z.yan@intel.com>
After iSCSI login sysfs is not updated immediately, but when session is
initialized. It can take a while and causes that sometimes scripts
cannot write to sysfs.
Change-Id: Ie4fa512704f022041bb3d9ab02dbb4210ddd04a0
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454890
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
To bind VMD device it need to be specified
in PCI_WHITELIST.
Change-Id: If19c47941278e4df9c6157024bba8b76c90695c6
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Signed-off-by: Orden Smith <orden.e.smith@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455635
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Make the old name a deprecated alias.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibbf50676e0d989b67121e465fc140f94faec46ed
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453033
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is a bit more flexible in case script accidentally
has an extra newline at the end of the rpc.py input.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1ebf08681e5900a4817712c7b62e4d5c21d43e54
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453956
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Adds support to spdkcli.py for raid devices via UIRaidBdev with
functionality to construct and destroy raid bdevs.
Information regarding the raid can be viewed via 'show_details' on a
given pooled_device child in the tree.
Signed-off-by: Mike Carlin <mikefcarlin@protonmail.com>
Change-Id: I2ca89e641b201c09b3d4db070eac6cc0c2cdec73
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452774
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We marked the old set/clear/get_trace_flags as
deprecated in v19.01. These are now called
set/clear/get_log_flags (to reduce confusion with the
tracing framework). Use the new methods in this
patch series to mark these RPCs as deprecated.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5ce8992ce8f6c1de5d5596b5f94a1587555e8546
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453563
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will get used in upcoming patches that actually
create RPC aliases.
Thanks to Ben Walker for help on the deprecated_alias
helper.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ica4432888b1ecb9bd234690758f67ef82794c50a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453035
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Ordinary python str.split() will by default split on each whitespace.
This includes arguments for rpc.py which expect a whitespace separated list,
eg. construct_raid_bdev -b "Bdev_1 Bdev_2".
shlex.split() prevents splitting on quoted arguments.
Change-Id: If37eb87cf82a161263f2b247baff5c8a77c43efc
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453652
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If user calls rpc.py with no parameters, it currently
hangs, waiting for input. It should print help in this
case instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5939999c57b8db0916267935d79ccc1a3201748b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453431
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
There are cases where srq can be a detriment. Add a flag to allow users
to disable srq even if they have a piece of hardware that supports it.
Change-Id: Ia3be8e8c8e8463964e6ff1c02b07afbf4c3cc8f7
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452271
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Just a couple minor clarifications.
Change-Id: I6c368d263296f742d5bfb0df431d3bf40c800c6c
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452270
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
iSCSI is currently being adapted to SPDK's new threading model,
and this parameter doesn't make sense anymore. Remove it for
now until something functionally equivalent is added later.
Change-Id: Ia0e2f5aa81b72d99467c5a900619fbeeb42b2069
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452779
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The product_name for raid bdevs was "Pooled Device" which was a legacy
naming convention that hadn't been cleaned up yet. This changes the
naming to be up to date with the current naming scheme.
Signed-off-by: Mike Carlin <mikefcarlin@protonmail.com>
Change-Id: I9092a2b793e48bb9ec0349087a31fdcde17ed9cd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452269
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Users can now pipe a large number of requests to
rpc.py, separated by newlines - each line will be
executed as if it was passed to rpc.py individually.
There is significant savings using this feature when
executing multiple requests through rpc.py. On my
system, a loop of 30 RPCs related to setting up
10 NVMf subsystems takes 5 seconds when executed
one at a time. With this new feature, it takes
less than 1 second.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iec957ca67461af8e8c41aee47e1d113714b22d3d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452770
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This makes no functional change to the script, but
it prepares for an upcoming change allowing callers
to pipe a newline delimited list of rpc calls.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I695ca61510f9edd336713e88d134e42c1d78a1b4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452769
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We decided to name compress bdevs with COMP_ and then the name of
the underlying bdev so the RPC parm name was stale. Previously
hardcoded the path to PM for early dev so replaced name with pm_path.
Note that a sample create looks like this now:
rpc.py construct_compress_bdev -b NVMe0n1 -p ~/pm_files -d compress_isal
And that devs need to pay attention for the pathname they provide, its
easy to leave orphaned pm files around and they can get big.
Change-Id: Ifb5245c922461bbecec4bef266bdeb25e8b87f31
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452235
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This script is not general purpose like gen_nvme.sh,
so move it to the test directory at least for now.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I22df9375a8fcd585884523f22dae8ba9354768d3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451785
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This will allow us to test a greater number of connections without
having to add more subsystems when doing NVMe-oF testing.
Change-Id: I33203d6db79b30abb065f098c16840096478c5de
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451677
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Without this, spdkcli crashes when refreshing if any iSCSI
connections are established.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I82cd7a98e8c7d48e4730a7bd228ed483bdac28ef
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451060
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It seems that need to add help2man in pkgdep.sh , it was used in ISA-L module.
Change-Id: I9d69e2cba270b1802c333941160ca714b85c21d2
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450562
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add missing parameter numjobs. It is used in one of the cases.
Remove unnecessary arguments:
- cpumask: we do not want to restrict that
- percentile list: we do not want to restrict that, all
percentule buckets can be generated.
Change-Id: I6a4431af0defe92920f16d26091d67161e56dc5a
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450519
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For future NVMeOF benchmarking scripts must support TCP layer.
This is a recent feature so also added support of using custom
built nvme-cli.
Example config file was updated with appropiate fields.
Rename rdma_ips to nic_ips, as NICs no longer need to be
RDMA-enabled for this test.
Change-Id: I368b48eca08a30b4221f198cb76134b8836dbba9
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449879
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Enhance RPC method start_nbd_disk to take nbd_device as
one optional parameter. If it is not assigned, automaticly
choose an available nbd device path from /dev/nbd0 to
/dev/nbdN.
For github issue #324:
https://github.com/spdk/spdk/issues/324
Change-Id: I72c064d8bd476df342f5aa0af4d6120eb021c7ed
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/440453
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
User should know the request ID that was issued.
Change-Id: If1191f73b31ebe04f23a88a9ca31fa157474056b
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449315
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Client might wan't to handle error response on it's own. To keep
compatibility with legacy code we need to move exception rising to call
method.
Change-Id: I8a07e7556424e87ee10fa9332100a9a10abe05d8
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449314
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The changes I made to the doc directory in spdk.github.io got
overwritten.
Change-Id: I468c7eeb8c36ccd969909e179c216d5def812602
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449360
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Defer the initialization when cache bdev mentioned in the config doesn't
exist when the FTL bdev is being created.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I084502ae38c9ae5e385e5566550ec3cb8b6f9d2e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448630
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added means to configure libftl to use (optionally) another bdev as
persistent write buffer cache.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I97028a681be168d9386eac8a226631ff772f803b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448629
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Wrong indent level caused results to be duplicated in final
output file if configuration file was used to run more than one
workload combination.
Change-Id: I0fadc10eba38898df648ec2da5fbd0440a3b9693
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449150
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Just the starting point, base functions and structs.
Change-Id: I2ff2b672aa675a19b89e4449f1cc4aa664007f6f
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/435747
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When testing on VM using a 10G .img file is problematic
due to size - sometimes there is not enough space.
Decreasing the size should improve this issue.
Change-Id: I7be91aaa56a4e7f60cfdffc67f85ae8b3f42b650
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449167
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Extend existing get_ocf_bdevs call to make it easier
to get information about attached cores.
Implementation is based adding additional optional argument "name"
to existing call. Based on "name" bdevs are filtered.
Backward compatability of RPC interface is preserved.
This patch also adds tests for the case when name is given.
Change-Id: I4300ebe37e936bc5cca8e066b5f09db462a87cf7
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/444841
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
scripts/fio.py and test/nvmf/fio/nvmf_fio.py are almost exact
same script. This commit unifies two files into one.
Change-Id: If753baaeb9f92dad2cda27bb4bed78ade4827d0b
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448656
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Check if the UUID in the configuration is null (all zeroes) and treat it
as if no UUID has been supplied.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ic91c77591528a8aaa4cf5c0241e6bde51b3757f1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448628
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
On non NUMA architectures the numa_node sysfs entry doesn't exist.
Check if it exists before reading to prevent an error causing 'status'
to fail.
Reviewed-by: Qingmin Liu <qingmin.liu@broadcom.com>
Tested-by: Jonathan Richardson <jonathan.richardson@broadcom.com>
Reviewed-by: Jonathan Richardson <jonathan.richardson@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Jonathan Richardson <jonathan.richardson@broadcom.com>
Change-Id: Iacf5b062a4f5db5e049d2cfcff7c991d4ac5d3c3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448576
Reviewed-by: Scott Branden <sbranden@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Qingmin Liu <calmarrow@gmail.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The python script for add_portal_group had required each portal is
an argument and portal list are made of remaining all arguments.
However this prevents adding new parameters to add_portal_group.
This patch changes portal list to be a single argument for python,
and each portal is separated by a whitespace in the argument.
Currently there will be very rare that a portal group has multiple
portals. Hence this change will not break any compatibility.
Updating CHANGELOG will be done together with other updates later.
Change-Id: I8c597a1194fff338afb371e6d24f9273122b753c
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446379
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
For NVMe devices, in conjunction with the new batching options,
it can be advantageous to artificially delay between polling
for completions. Add an option to slow this rate down.
Change-Id: I0fc92709ff45ead0beb388dda60694bf1ed8b258
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447716
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The JSONRPCClient class now support the with statement. From now on the
__del__() method is changed to close() and user need to call it manually
at object disposal or use the 'with' Python statement.
Change-Id: I74afd93d411b9596ab8f9523c54a4a7523eec5e5
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/444686
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
This will allow testing notifications code where user will most likely
issue many requests and socket buffereing might just squash them into
one packet.
Note that multiple requests are not send in batch mode.
Change-Id: Icfa4bfe21ff1268796bc41cf0443737f260b6040
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436529
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add extra long argument '--verbose <VERBOSE LEVEL>' to add more log
levels Default is error. Legacy'-v' parameter is translated into INFO
log level.
Some parts of code are logged using DEBUG level.
Change-Id: I2aaa6e2fbaf9b2101c6eeaec0cef6141636f135b
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436528
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Switch to raw_decode in recv() function. This allow to decode JSON
objects one by one. Decoded part is removed from from receive bufer.
Change-Id: Id0d78a2ace85bcbb9cc8e30d72da6c1c2cad753c
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/435507
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
OpenSUSE releases (OpenSUSE Leap and Tumbleweed) now use
/etc/SUSE-brand than /etc/SuSE-release as SUSE identification.
According to this change, This commit intends to update
scripts/pkgdep so that it could install packages for OpenSUSE.
Tested on OpenSUSE Leap 15.0 and latest Tumblweed.
Change-Id: I878b6671753084ef718e1f7630a42520a72ea151
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446504
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This RPC was deprecated a couple of releases ago.
bdev modules now each have their own RPC for deleting
bdevs. Due to how bdevs are created differently on
different modules, it is simply not possible to
have one delete_bdev RPC that would work for all bdev
types.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia46c95dce6e35f7557e8d41c41b8fea382924547
Reviewed-on: https://review.gerrithub.io/c/442615
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Default 'unmap' option stays as it was.
'Write_zeroes' comes useful when one wants to make sure
that data presented from lvol bdevs on initial creation presents 0's.
'None' will be used for performance tests,
when whole device is preconditioned before creating lvol store.
Instead of performing preconditioning on each lvol bdev after its creation.
Change-Id: Ic5a5985e42a84f038a882bbe6f881624ae96242c
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442881
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This utility used to be called "bdevtest" so that's
what opts.name was set to for spdk_app_opts_init().
Change it to the new name "bdevio".
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id8e6614c6fe82651952f46ec56de14ef0a8961f0
Reviewed-on: https://review.gerrithub.io/c/445800
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
When called from scripts, sometimes the arguments passed
will be empty.
Change-Id: I2f9fa1daa173eecc7b20928cd359284bb6f74ff3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/444278
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This function should be changed as well but was overlooked.
Fixing this here.
Change-Id: I2f7c8e475d89cfe177441e1843d3713397f6fe7b
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/444079
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A new module switch which was missed at here.
Change-Id: If1784ace13657756d8034cd04e594af5b1799381
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/444820
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
pycodestyle is the new style checker for python. We should install it as
available on all distributions.
Change-Id: I399f84a7027c0d7b8e9974fbc3be86c3c4beefae
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/444447
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
On some platforms, especially AWS, uio_pci_generic is not readily
available, and we don't have access to an IOMMU, so using the DPDK
igb_uio driver is a valid workaround.
Change-Id: Ic96776f925d9bbbcab625f5adb7642ca6bd4033d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/444122
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
pycodestyle correctly detects that there isn't
two line breaks after the end of the class here.
The test pool pep8 does not catch this. We need
to move the test pool to the newer pycodestyle
tool.
Change-Id: I5fa8b66f8c3d76e41140e79fdcd264d7b38f86c7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/444445
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The current state for the setup script is that the vfio kernel driver
will be preferred against the uio_pci_generic driver only if an IOMMU is
present in the system. This is checked by looking for any IOMMU groups
in sysfs.
In case of vfio no-IOMMU driver, there are no IOMMU groups when loading
the vfio modules. The IOMMU groups are created when the PCI devices get
bound to the vfio-pci driver. Thus, even though the vfio driver is
loaded, the setup script will prefer to use the uio_pci_generic kernel
driver. This patch changes this behavior.
In order to support vfio no-IOMMU mode, the setup script will be
checking if the vfio module is loaded with parameter
"enable_unsafe_noiommu_mode". In other case, it will be falling back to
the uio_pci_generic driver.
Change-Id: I1e8317bc4e3d6af4ba8a9e0c51175c9f4190f47b
Signed-off-by: Nikos Dragazis <ndragazis@arrikto.com>
Reviewed-on: https://review.gerrithub.io/c/441062
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Python3 (3.6.7) gives W605 errors in regular expressions, causing the
SPDK style checks to fail on the Python scripts doing the style checking.
This fix allows these Python scripts to run without errors.
This is a known issue - see https://github.com/PyCQA/pycodestyle/issues/814
Change-Id: I71cdff5d6c89e19b200c989f3d9da35bb4f7189d
Signed-off-by: James Bergsten <jamesx.bergsten@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443955
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add prchk_reftag and prchk_guard to construct_nvme_bdev RPC.
In spdk_rpc_construct_nvme_bdev, create prchk_flags based on them
and pass it to spdk_bdev_nvme_create, and in spdk_bdev_nvme_create,
pass it to create_ctrlr.
A single option enable_prchk may be enough but add separate options
for reftag and guard to clarify that apptag is not supported yet.
The next patch will make per-controller PRCHK options configurable
by .INI config file.
Change-Id: I370ebbe984ee83d133b7f50bdc648ea746c8d42d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/443833
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
strip_size as an rpc param is now deprecated and can be removed
in a future release. Either strip_size or strip_size_kb can be
used but only one of them or the rpc will fail.
Internally we maintain both fields because strip size always
comes in as KB but we convert it to blocks so having both elements
makes it clear for developers what they're looking at.
JSON output includes both strip_size and strip_size_kb.
Fixes#550
Change-Id: I5dc51e8af22eae3d56af8f8d37a564dbaae228fa
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/437873
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
iter_pci_dev_id abd iter_pci_dev_id functions should
not return BDF for devices that are not ment to be used
in tests.
Note that not all tests are ready for this change as they
discover functions on its own. Lets this changed in
separate patch.
Change-Id: I45a59ec121aa81e9f981acae7ec0379ff68e520a
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443767
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Change-Id: I93f7e4e7d76f2fac4174050b249329993f28f71f
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442095
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add PCI blacklist so we can skip only some devices.
Change-Id: I8600307dd53f32acb4dfeb3f57845e0b9d29fdb9
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442977
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Bash interprets everything after command as additional
function arguments. To not confuse user just remove this part
and replace by '!'.
Change-Id: I44228003a1f96324271e726df4f5033f3258523c
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442976
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Introduced a new variable to run functional tests.
It's enabled by default, and can be manually disabled
on systems where e.g. only unit tests are run.
SPDK_RUN_FUNCTIONAL_TEST is a supplement to SPDK_UNITTEST.
The two are completely independent - both can be enabled,
disabled, or run in any combination.
The new variable is prefixed SPDK_RUN_ as it aligns nicely
with SPDK_RUN_CHECK_FORMAT, SPDK_RUN_VALGRIND, and
SPDK_RUN_ASAN, all of which control how much is tested.
SPDK_UNITTEST should eventually follow the same pattern
as well.
This gives us 2 layers of configuration:
SPDK_TEST_* <- what is tested
SPDK_RUN_* <- how it is tested
The following would run UT+ASAN for FTL and BlobFS, without
running their functional tests:
```
SPDK_RUN_FUNCTIONAL_TEST=0
SPDK_RUN_ASAN=1
SPDK_TEST_UNITTEST=1
SPDK_TEST_FTL=1
SPDK_TEST_BLOBFS=1
```
Change-Id: I9e592fa41aa2df8e246eca2bb9161b6da6832130
Signed-off-by: Seth Howell <seth.howell@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442327
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
I think this wording is slightly more clear.
Change-Id: I9fc500b8b87c0520bdf96e6c5db490bb98121da3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442435
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This was marked deprecated in the v18.10 release, so
remove it now before v19.01 is tagged.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I57673a5ab475b97c812bebcefd77ff90d9305d1c
Reviewed-on: https://review.gerrithub.io/c/442412
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
- Add option to throttle iops in VMs using cgroups
- Add option to measure CPU utilization in VMs using SAR
- Add option to limit kernel vhost CPU cores (not NUMA optimized)
- Add option to do lvol preconditioning using fio bdev plugin
before running IO performance test
Change-Id: I7e0fcf977be96ecf837385c2abc9d5dabbe2f8c5
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/434229
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We can use spdk_strtol and spdk_stroll instead, which do a better job of
catching errors.
Change-Id: I09ff75356b932366b6c10cd6953610f609ce4b0e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441984
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This patch introduces functional tests for FTL bdev.
The tests cover various I/O workflows and check data integrity. Several
scripts have been added to test the FTL library:
* generate_config.sh - prepares configuration scripts for specified
device
* restore.sh - tests restoring device's state from the SSD
* fio.sh - runs tests based on fio and fio_plugin
The tests are run from autotest.sh when the SPDK_TEST_BDEV_FTL flag is
set.
Change-Id: I561d99ed35fe91eadd3756789cc99afe2da8c1db
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/431330
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
In SPDK, we will build isa-l with no shared option
and then integrate it into SPDK. And we do not need
to install isal in the system libaries.
Note: ocf build in autobuild.sh now needs to build
include/spdk/config.h before building the ocf library,
to ensure that header is available in a clean build
environment.
Change-Id: I3f0ce6932b386de17a77cf5bfdfd738b22417e2d
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Signed-off-by: paul luse <paul.e.luse@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441279
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Chunyang Hui <chunyang.hui@intel.com>
Marked as deprecated in 18.10.
Change-Id: I40d0e6103623aee6e6a0b9fa6e82f7b826ca1fe6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442420
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This was marked deprecated in 18.10
Change-Id: Id47e770b0388c935fe684aeef7a9824f24cef47f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442416
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add new RPC method for OCF bdev: get_ocf_bdevs
It is useful in respect to not registered OCF bdevs
which do not appear in standard get_bdevs call
Change-Id: I8a5fc86a880b04c47d5f139aa5fa4d07ca39c853
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441655
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds FTL bdev. RPC scripts have been updated to allow for
creation and removal of FTL bdevs.
Change-Id: I82a5c5033b65bbeb67c238cae969a68cff767dcc
Signed-off-by: Jakub Radtke <jakub.radtke@intel.com>
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/431329
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds RPC calls for histograms in bdev layer.
Following calls are added:
- enable_bdev_histogram - enable/disable histogram structures for specified bdev and each of its channels.
- get_bdev_histogram - merges histograms from all channnels and encodes histogram as base64
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ib423a919dc1cde7dd7d92247db5482cfb9d66956
Reviewed-on: https://review.gerrithub.io/c/433573
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Some users require to do write zeroes operation when
erasing data on lvol. Currently the default method is
unmap. This patch adds flag to spdk_rpc_construct_lvol_bdev
call that changes default erase method. This is also a base
implementation for possible future function for erasing
data on lvol bdev.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I8964f170b13c2268fe3c18104f7956c32be96040
Reviewed-on: https://review.gerrithub.io/c/441527
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This patch adds the RPC support for the Read/Write separate
bandwidth limit controls. The basic usage as following:
usage:
rpc.py set_bdev_qos_limit [-h] [--rw_ios_per_sec RW_IOS_PER_SEC]
[--rw_mbytes_per_sec RW_MBYTES_PER_SEC]
[--r_mbytes_per_sec R_MBYTES_PER_SEC]
[--w_mbytes_per_sec W_MBYTES_PER_SEC]
name
positional arguments:
name Blockdev name to set QoS. Example: Malloc0
optional arguments:
-h, --help show this help message and exit
--rw_ios_per_sec RW_IOS_PER_SEC
R/W IOs per second limit (>=10000, example: 20000).
0 means unlimited.
--rw_mbytes_per_sec RW_MBYTES_PER_SEC
R/W megabytes per second limit (>=10, example: 100).
0 means unlimited.
--r_mbytes_per_sec R_MBYTES_PER_SEC
Read megabytes per second limit (>=10, example: 100).
0 means unlimited.
--w_mbytes_per_sec W_MBYTES_PER_SEC
Write megabytes per second limit (>=10, example: 100).
0 means unlimited.
Change-Id: I822ec4814d21adff9826ce03a6af3783b1b98f44
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/417650
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Added set_read_only_lvol_bdev() RPC that marks
lvol bdev as read only.
This enables to create clones off of a base lvol,
without having to create additional lvol bdev with snapshot.
Change-Id: Ic20bbcd8fbebcef157acce44bfa1da035b0da459
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440534
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In a couple of cases, we do specify --ignore-submodules
for the actual check, but when dumping the results
to the console, we omit the --ignore-submodules. Fix that.
Same for check_format.sh - don't consider submodules for
files changes that suggest a CHANGELOG.md update.
This is in preparation for adding isa-l as an SPDK
submodule. isa-l doesn't use any .gitignore files, so I
want to make sure we're just ignoring anything related to
isa-l build artifacts. We could probably remove our
local DPDK submodule patch to its .gitignore after this
patch but will leave that for another time.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id9be9ce87569004c426d02c6cd44d645f3ff859f
Reviewed-on: https://review.gerrithub.io/c/440808
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This allows us to remove the requirement to install intel-ipsec-mb to
system directories.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I579655a98b515cf148b7cd17823a9bb541ea6ad7
Reviewed-on: https://review.gerrithub.io/c/440785
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Disks with NVMe driver were probably not whitelisted before.
Do not add them to NVMe subsystem configuration.
Change-Id: I9418590f5562a96750685d101323b60e56cc90cb
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/438426
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Modifed scripts/detect_cc.sh to take additional parameter specifing
the linker to use. Default to LLD on FreeBSD systems.
Change-Id: Idf97e9676a144028c0803d272ae6f0e903b0dd1f
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/438801
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Private network DHCP would put the wrong nameserver in the /etc/resolv.conf
file. This would break apt-get or anything that needed network access.
Removing that line from the Vagrantfile caused this to work.
Change-Id: I66dab9ddf72018a8e39e8e24d0b8175173ddb8f1
Signed-off-by: Lavar Askew <open.hyperion@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/434392
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
