Added a check before any of the parted calls to
confirm the size is what is expected.
Fixes#2388
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: I18720c66d70da82b8943d3231348a4015108a598
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11820
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Michal Berger <michallinuxstuff@gmail.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
After 7610bc38d, python modules are now located in the python/
directory. That patch also updated PYTHONPATH assignment in most of the
scripts, but one of the perf script and some docs/messages were missed.
Change-Id: Iff3588526f2a382e599f5734d38fc32c15a7bf56
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12223
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Up until now, importing an SPDK RPC python module was just a matter of
`import rpc`. It's fine until there's another module called `rpc`
installed on the system, in which case it's impossible to import both of
them. Therefore, to avoid this problem, all of the modules were moved
to a separate directory under the "spdk" namespace.
The decision to move to a location under a separate directory was
motivated by the fact that a directory called scripts/spdk would look
pretty confusing. Moreover, it should make it also easier to package
these scripts as a python package.
Other than moving the packages, all of the imports were updated to
reflect these changes. Files under python now use relative imports,
while those under scripts/ use the "spdk" namespace and have their
PYTHONPATH extended with python directory.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib43dee73921d590a551dd83885e22870e72451cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9692
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This test reproduced issue #2428. It does the following:
1) submit some large writes (requiring R2T or RDMA READ)
2) submit fused compare (first fused)
3) variable number of qpair polls
4) submit fused write (second fused)
The RDMA and TCP transports were not accounting for the
fused bits, and would send a non-fused command down to
the target layer between the two fused commands.
By adding the variable amount of delay between the fused
command submissions, it creates a window where a large
write's payload is fetched from the host and submitted
to the target between submission of the two fused commands.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1abd5a6bca08386279c09f8135387826149d30ef
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11963
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Scripts are modified to create easily recognizable partition
label so that we know autotest.sh can safely remove them.
It is possible to achieve by creating the GPT partition with
'SPDK_TEST' label.
Fixes#2345
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: Ibfcebc5bb68e1b4e1d93e0359a39d3e34748d21d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11821
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Add flag "SPDK_TEST_FUZZER" to control building of llvm lib using
CC=clang-$clang_complier
CXX=clang++-$clang_complier
config_params with --with-fuzzer=/usr/lib64/clang/$clangV/lib/linux/libclang_rt.fuzzer_no_main-x86_64.a
Signed-off-by: Jun Wen <junx.wen@intel.com>
Change-Id: Icf3dfe13989d083d22be69b964a54830324a657e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11153
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: <qun.wan@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Test for github issue 2371:
No request available for FABRICS/CONNECT when
running bdevperf w/ ultra high queue depth.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: Idb125dd29c0e6ac4e8c2c67cb68e010e128fd947
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11598
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Ensures compliance now that we've deprecated being
able to connect to any listener without adding it to
the discovery subsystem first.
This patch was tested with a temporary change that
removes the default discovery listener. It is
possible that future test changes could again
depend on this deprecated behavior, but at least
now all existing tests will explicitly create the
discovery listener, making it more likely that
new tests will copy the correct behavior.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I936d3d124e22a56548ea43c73ca8197c22ec0f66
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11541
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Signed-off-by: Michal Berger <michallinuxstuff@gmail.com>
Change-Id: Ic64efc12a0901c1436f55bea4b3f7a548fc705e1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10942
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jun Wen <junx.wen@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was a parameter on the nvmf_create_transport
RPC, and was replaced with max_io_qpairs_per_ctrlr to
reduce confusion on whether this number included the
admin queue or not.
nvmf_vhost test was using this deprecated parameter.
Change it to use -m (max_io_qpairs_per_ctrlr)
instead. '-p 4' would have been evaluated as 1 admin
queue + 3 I/O queues, but it's likely the intent
was for 4 I/O queues. This is a perfect example of
why this parameter was deprecated.
For reference, this was deprecated in June 2020,
commit 1551197db.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4364fc0a76c9993b376932b6eea243d7cefca9cd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11543
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
There's no point in running bdevperf in the background only to send a
framework_wait_init. Moreover, since bdevperf is executed with a 1s
timeout, there's a risk that it'll finish before that RPC is sent
causing a false positive failure.
Fixes#2046
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Icb5a8535d39954b7dfd3b4386cd008214d180bf3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11014
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Extended the zcopy test with a step checking aborts. It's similar to
`test/nvmf/target/abort.sh`, with the difference being that here the
aborted requests are executed using zero-copy.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ia25936b7097a94d278c467ce07c009091ea3a55a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10799
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The test has two phases: first it runs a bdevperf with rw=verify to
check data consistency and then runs bdevperf in the background while
sending RPC requests causing the subsystem to be constanty
paused/resumed.
In-capsule data is set to 0 to make sure all IO requests are using
zero-copy.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I1c1d7eb04714c8506307cb95b6cbc5988c8946a3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10797
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Change-Id: Ib696c7787151e4898b63f57749bd134333e94a23
Signed-off-by: Mao Jiang <maox.jiang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10413
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Set the maximum admin queue size to 256 to make sure it can hold the
number of admin requests required by the abort application.
This patch fixes the following error and actually allows the test to
start:
ctrlr.c: 720:_nvmf_ctrlr_connect: *ERROR*: Invalid SQSIZE for admin queue 135 (min 1, max 127)
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I4042481ffb2792381ef2e4ad295be067a610bd7e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10771
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
LLVM provides libFuzzer which does coverage-guided
fuzzing of a library or application under test. For
SPDK, we can use this as a new and better way to
generate random commands to the SPDK nvmf target.
By default, libFuzzer provides the main() and your
source file just provides the function called by
LLVM for each iteration of random data. But this
doesn't really work for SPDK since we need to start
the app framework and the nvmf target. So we
specify -fsanitizer=fuzzer-no-link, explicitly
specify the location of the fuzzer_no_main library
and then call LLVMFuzzerRunDriver to start the
fuzzing process once we are ready.
Since this is all coverage-guided, we invoke the
fuzzer inside the nvmf target application. So this
patch creates a new target application called
'llvm_nvme_fuzz'. One core is needed to run the
nvmf target, then we spawn a pthread to run the
fuzzer against it.
Currently there are two fuzzers defined. Fuzzer 0
does random testing of admin commands. Fuzzer 1
is focused solely on GET_LOG_PAGE and fuzzes a
smaller subset of the bytes in the spdk_nvme_cmd.
Additional fuzzers can be added in the future for
other commands, testing I/O queues, data payloads,
etc.
You do need to specify CC and CXX when running
configure, as well as specify the location of the
special clang_rt.fuzz_no_main library. The path of
that library is dependent on your clang version and
architecture. If using clang-12 on x86_64 platform,
it will look like:
CC=clang-12 CXX=clang++-12 ./configure --with-fuzzer= \
/usr/lib/llvm-12/lib/clang/12.0.0/lib/linux/libclang_rt.fuzzer_no_main-x86_64.a
Then just do the following to demonstrate the fuzzer
tool.
make
test/nvmf/target/llvm_nvme_fuzz.sh --time=60 --fuzzer=0
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iee0997501893ac284a3947a1db7a155c5ceb7849
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10038
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Bloated log files appear during some tests
(nvmf_phy_autotest, during nvmf_abort test fot example),
what makes parsing them inconvenient. This change aims
to disable logs that cause this issue by adding a new flag
for SPDK target and disabling notice level logging completely
(using --silence-noticelog proved insufficient).
Fixes: #2149
Change-Id: Ibbad92d87d90fe73c23d6027e0ff8ec49b0393c2
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10311
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change-Id: I1a87d9245ba8a4f4e01d510cae4a318fa3323ca2
Signed-off-by: Mao Jiang <maox.jiang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10257
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
btrfs.tools v5.15.1 in Fedora 35 complains about target
device being too small to create a filesystem.
Let's increase the bdev size to this test.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Iedf59328b91516693c88af8c5d47dde849394337
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10614
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This fixes commit 74dcf4aa "example/nvme/arbitration: add vfio-user transport support".
For vfio-user transport, we should use static DPDK memory model for
sharing memory between client and target. Also enable log option here.
Change-Id: Iea1b28cbf234f5fc935c54899023bdbf1733a671
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10510
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Running the nvmf_abort test outputs so much error logs and it is very
noisy. Running nvmf_abort for 1 sec will be enough.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2700828c228e1cc03e73675c5f3f683dbf3a57d6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10299
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia1431a9aad103ebc80e9071b984ee152c7a27a53
Signed-off-by: Mao Jiang <maox.jiang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9891
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
If a connection is lost, Linux NVMe host tries reconnecting after
10 seconds delay by default. To cover this case, extend the timeout
to 20 seconds. Usually Linux NVMe host recognizes the new ANA state
within 2 seconds.
This patch is for the github issue #2081
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I61fba2febcea81951c8b29f940d93863bc31b332
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9393
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
There's really no need to specify 4 cores for both the fuzz app
and the nvmf target, since only one is ever used. Reducing the
mask to a single core each makes the fuzz.sh tests easier to run
in VMs with a limited number of cores.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id956ac8d0d7f75cb0e76b78c9175b4aa520218bf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9725
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Previously the Transport IDs would need to be an ini-style
config file that the nvme_fuzz app would then parse. Instead
just add a -F option that tells the nvme_fuzz app which
subsystem(s) to fuzz. This simplifies the fuzz_app code
a bit and makes it a bit easier to use.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I622f5173ff36e15d653155c4eb7eaaecb5564818
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9603
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Running create/delete loop 50 times causes the test to
take over 10 minutes and time out in nightly version.
We have various code analyzer tests in place so running
the same script block over 50 times in hope of detecting
memory leak or some similar defect seems a bit redundant.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Icb2acb0ffbbe63d3004532d0b4a261152891216a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9166
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This new connect_stress application connects to a
specified subsystem, creates some IO qpairs and
reads the CSTS register. It goes through this loop
over and over again until the specified time expires.
The connect_stress.sh test script runs this application,
and then while it is running does continuous add_ns and
remove_ns RPCs.
This stresses nvmf handling of connect (admin + I/O) as
well as get_property commands.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8ab5156045cf5614f74988e38a9d37db96d7d5b9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8572
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
SC2251: This ! is not on a condition and skips errexit.
Use && exit 1 instead, or make sure $? is checked.
This is critical since our test suites heavily depend on errexit
to catch all abnormal conditions. Replace ! foo ... with a call to
NOT() wherever possible. For the test/ocf pieces, use [[ ]] instead
to define the condition for the existance of the ocf bdev.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ied3f99b9f1dc0594e4aef64fc21e51498f19ac23
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8504
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The latest Linux NVMe host (e.g. Linux kernel 5.12) have improved
the quality of multipath but still has an issue such that ANA state
is observed to be invalid even after connection is successfully
created.
By code inspection and system test, initializing ANA state may be
delayed even after connection is successfully created.
We can insert a short sleep but it will be better to retry checking
with timeout. The created function check_ana_state() is applied to
the remaining cases.
This fixes the part of the issue #1819.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifc4eaef7c702d961caeee5bcdc9e6eab4704fc5d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8475
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function was unintentionally including trace lines in its output
by playing with stderr (where -x is redirecting its output by default).
Avoid that by simply listing the devices and doing proper checks from
within the actual test.
Spotted in https://github.com/spdk/spdk/issues/1973
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: If15375aca152aaa49267c9cc51e70fd859685ea1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8156
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
After commit a31e319f "nvme: init discovery ctrlr using nvme_ctrlr_process_init"
SPDK will not initialize vfio-user subsystem if we didn't specify it
in the command line, so add this parameter as other transports already use it.
Change-Id: I5331459e9a88d8d94fa8b6ce693e086516b9f0bc
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8120
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There are logs like below in existing CI tests:
"nvmf_subsystem_create is deprecated, use nvmf_create_subsystem instead."
Change-Id: Id257ab13120a71ad3d0ae7ed22ed6e0a4f005cf0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7670
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add {min,max}_cntlid to spdk_nvmf_subsystem, defaulting to 1 and
0xFFEF, respectively, and add nvmf_subsystem_set_cntlid_range() to
allow the controller range to be configured in the range [min_cntlid,
max_cntlid].
Also add {min,max}_cntlid to the nvmf_create_subsystem RPC to allow
the controller ID range to be specified when creating an nvmf
subsystem.
Signed-off-by: Jonathan Teh <jonathan.teh@mayadata.io>
Change-Id: I936db3bb0c9a38569063a6fd3c11df262dfad776
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7322
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
fio.py simply wraps itself around fio and doesn't do anything that
would require python to be in use. Having it in a simple bash form
makes it easier to integrate it with autotest's common sh tooling
and to debug any potential issues with the underlying tests.
This also fixes#1919 by making sure only proper nvme devices are
selected for the nvmf targets.
Fixes: #1919.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I111d00df3c7b2517f431cae865e258a665c2ecb3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7684
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We only need to create an empty directory for vfio-user device,
the softlink isn't required anymore, so remove it.
Change-Id: Ie3f9ce73d287be3651f4ac06483888ac0f693700
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6954
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
SPDK block devices can only be resized up when
it is open. So there is no need to pause the
associated namespace itself when resized - just
pausing the subsystem is enough.
Also modify the ns_hotplug_test to do null bdev
resizing - this will help test this resize code path.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3cb7b9de0892c296f2abf2280bed434d18ebe6b5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6467
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Previously we only tested one device with vfio-user target,
now add one more device to the test script.
Change-Id: I6923a313b23f93e6fdc3f25baa060b9af43ba7f7
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6228
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since this script is only running tcp transport,
so we can enable the header and data digest configuration
when running nvme connect option.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I9954af0fc9798cc565c2a439ecba1707d3629e83
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6119
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Additionally, the user can specify a namespace to also pause during the
operation.
This allows for the management of hosts, listeners, and the addition of
namespaces all while I/O to other namespaces is occurring. Pausing a
specific namespace also allows for the removal of that namespace without
impacting I/O to other namespaces in the subsystem.
Change-Id: I364336df16df92fe2069114674cb7a68076de6fb
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4997
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When NVMf target linked with vfio-user library, we can use
vfio-user client library to connect to the target.
Here is the three examples that can work with target:
identify -r 'trtype:VFIOUSER traddr:/var/run/muser/domain/muser0/8' -g
perf -r 'trtype:VFIOUSER traddr:/var/run/muser/domain/muser0/8' -g -q 1 -o 4096 -w read -t 10
reconnect -r 'trtype:VFIOUSER traddr:/var/run/muser/domain/muser0/8' -g -q 32 -o 4096 -w randrw \
-M 50 -t 10 -c 0xE
You can run the following test script test/nvmf/target/nvmf_vfio_user.sh to have a quick test,
currently enabled with NVMe Identify,Perf,Reconnect tools.
Change-Id: Ieb9842b2f372184fffbf7f23e4aad26feb47c350
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3839
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
