Similar to examples/nvme/perf/perf.c
Usage:
-z disable zcopy
-Z enable zcopy
Signed-off-by: Boris Glimcher <Boris.Glimcher@emc.com>
Change-Id: I56f1b0d9c79cbfdba57d0e132a18cb5dce0b7904
Signed-off-by: Boris Glimcher <Boris.Glimcher@emc.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12435
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When we use Fuzzer 0 to do random testing of admin commands,
it's should be a normal one, instead of Fused operation.
Change-Id: I652a725798e79842866be01119be817c965fcee7
Signed-off-by: Yifan Bian <yifan.bian@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12421
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Added a check before any of the parted calls to
confirm the size is what is expected.
Fixes#2388
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: I18720c66d70da82b8943d3231348a4015108a598
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11820
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Michal Berger <michallinuxstuff@gmail.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
blockdev_compare_and_write and blockdev_write_read check
if data_length is multiple of block size and silently
succeed if it is not. There are multiple test that test
e.g. invalid size but the actual bdev API is
never called and tested because of the early return.
The intend of this behavior presumably was to allow
to run test like e.g. the 512bytes rw test on a 4K
formatted namespace without failing. Instead of silently
succeeding which introduces the issues described this
patch changes all sizes to be multiple of block size and
removes the test for valid block size to let the
return value of the bdev API functions indicate failure like
intended. All previous 4k tests are now performing io of
1 block size. Previous 512byte tests now perform
8 * block size (to have 4k test size for 512byte formatted
namespaces). Write zeroes test are now using the
write zeroes buffer size instead of a hardcoded value
and align accordingly to block size io.
Furthermore, no cmp&write test is ever executed because
data_length is set to 1 trying to indicate 1 block but
it is tested against valid block bytes and silently
succeeded. Also write and read helpers in cmp&write test
expect bytes not blocks. For consistency use bytes in the
test and only convert to blocks when calling the cmp&write
blocks API.
Signed-off-by: Jonas Pfefferle <pepperjo@japf.ch>
Change-Id: I662094c2bcd08c0e9dc5573177a2e7a0edd275ce
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12382
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Can only 'return' from a function or sourced script.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ie6104adeec0f07557989d9ba25ca9aa2f563e1d5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12422
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Do not perform strict host checking and mask
known hosts file. The test might run just after
IP address is set up and we don't want to get
stuck at ssh interactive prompt for adding remote
host to known hosts list.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I10e5e473520994e09562e667b27ee655fceb2dd5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12348
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Put the SSH routine into a function and allow to
use custom SSH key by using an optionally set
environment variable.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I6b1f552af9e28ab0b94d027c8848ef0dd5480791
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12339
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Branch "vfio-user-v0.93" has been silently removed.
To fix pkgdep script, branch "vfio-user-dbfix" been
chosen, but the reason behind this decision is
unknown to me.
Signed-off-by: Pawel Piatek <pawelx.piatek@intel.com>
Change-Id: I56dece900efcddfc020e13f2f8ef1019cc2185ec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12358
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
spdk_bdev_get_acwu() is a 1-based number, so we need
to subtract 1 from it before assigning the value to
nsdata->nacwu.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I32708b28a35670cba6013a48b79389fa48226285
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12399
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Fixing grep because in freebsd grep interprets --exclude,include differently
which causes match on run_test()
Fixes: #2479
Signed-off-by: Jaroslaw Chachulski <jaroslawx.chachulski@intel.com>
Change-Id: I3ab5daa7cd49d2bc8f1af6f7517f9b74b2dd88de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12392
Reviewed-by: Michal Berger <michallinuxstuff@gmail.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
The bdevio test app has some test cases verifying
that write zeroes commands are handled correctly,
but using knowledge of the ZERO_BUFFER_SIZE that
the bdev library uses for splitting larger write
zeroes commands. Instead of hardcoding that 1MB
value in bdevio.c, have bdevio.c use ZERO_BUFFER_SIZE
directly instead. But this requires moving
ZERO_BUFFER_SIZE into bdev_internal.h and having
bdevio.c include that file.
We do this instead of putting ZERO_BUFFER_SIZE in
the public API because we don't want users to
make any kind of dependencies on this value.
While here, also rename the tests that are using this
value, so that the test names don't include any reference
to the specific size of this bdev-internal zero buffer
size.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia29d92a706cb1f86b4c29374dc2a9beccf679208
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12383
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Centos7: ndb package version update - version 3.14-2
of the nbd package is no longer available in
epel repository.
Updated for version 3.24-1.
Centos8: repository URL change - old ceph
repository has Centos version mismatch.
Centos8: no need to install NBD package. It is available
on the system by default.
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: Ifae0833822b270127b31fe95c14f6803f688bfc6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12156
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When sending a fused compare and write command, we pass a callback
bdev_nvme_comparev_and_writev_done that we expect to be called twice
before marking the io as completed. In order to detect if a call to
bdev_nvme_comparev_and_writev_done is the first or the second one, we
currently rely on the opcode in cdw0. However, cdw0 may be set to 0,
especially when aborting the command. This may cause use-after-free
issues and this may call the user callbacks twice instead of once.
Use a bit in the nvme_bdev_io instead to keep track of the number of
calls to bdev_nvme_comparev_and_writev_done.
Signed-off-by: Alex Michon <amichon@kalrayinc.com>
Change-Id: I0474329e87648e44b08998d0552b2a9dd5d34ac2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12180
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds an extra spdk_thread_send_msg() call to destroy a qpair
to make sure that it isn't freed from the context of a socket write
callback. Otherwise, spdk_sock_close() won't abort pending requests,
causing their completions to be exected after the qpair is freed.
Fixes#2471
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ia510d5d754baccca1e444afdb10696ab9b58e28b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12332
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There is a race condition when a bdev is unregistered while reset is
submitted from the upper layer very frequently.
spdk_io_device_unregister() may fail because it is called while
spdk_for_each_channel() is processed.
spdk_io_device_unregister io_device bdev_Nvme0n1 (0x7f4be8053aa1)
has 1 for_each calls outstanding
To avoid this failure, defer calling spdk_io_device_unregister() until
reset completes if reset is in progress when unregistration is ready
to do, and then reset completion calls spdk_io_device_unregister()
later.
A bdev cannot be opened if it is already deleting. So we do not need
to hold mutex.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ida1681ba9f3096670ff62274b35bb3e4fd69398a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12222
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Previously, if a namespace is in ANA inaccessible state, I/O had been
queued infinitely. Fix this issue according to the NVMe spec.
Add a temporary poller anatt_timer and a flag ana_transition_timedout for
each nvme_ns.
Start anatt_timer if the nvme_ns enters ANA transition. If anatt_timer
is expired, set ana_transition_timedout to true. Cancel anatt_timer or
clear ana_transition_timedout if the nvme_ns exits ANA transition.
nvme_io_path_become_available() returns false if ana_transition_timedout
is true.
Add unit test case to verify these addition.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ic76933242046b3e8e553de88221b943ad097c91c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12194
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Now controller initialization with RDMA
transport is fully async
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I26e857740d3137d0b0e987facc81fc5f6ef81f2b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10756
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
bdev may not support IO_TYPE_RESET, so spdk_bdev_reset
may fail and we can hit UT assert. Fix - wait for success
or failure of the reset depending on the support of reset
operation
Part of fix for issue #2454
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I6e95b6ed46bafd34cfdcc7c91ec23f974045ea95
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12248
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This reduces a lot of casting.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ibc04f422858642d0e20c9b020bb6c5d1b70256fe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11534
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Similar to commit 9035986e for the nvmf tests, we add
the same FORWARD entry here for iscsi_tgt tests.
Some distros or kernels do not automatically forward
packets across the bridge we set up in
create_veth_interfaces(). So add an iptables entry to
explicitly add a forwarding rule.
This allows me to run the iscsi_tgt tests in my
Ubuntu 22.04 VM.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9e48c10971bdf752e8bd83e5494f4a2a75b06ccd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12161
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The code to handle the lingering qpair when deleting it was really
complicated.
The RDMA transport can connect or disconnect qpair asynchronously.
Then we can include the code to handle the lingering qpair into the
code to disconnect qpair now.
If the disconnected qpair is still busy, defer completion of the
disconnection until qpair becomes idle.
If poll group is not used, we can complete disconnection immediately
because cq is already destroyed.
The related data and unit test cases are not necessary anymore.
So delete them in this patch.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ic8f81143fcad0714ac9b7db862313aa8094eeefb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11778
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add three states, INITIALIZING, EXITING, and EXITED to the rqpair
state.
Add async parameter to nvme_rdma_ctrlr_create_qpair() and set it
to opts->async_mode for I/O qpair and true for admin qpair.
Replace all nvme_rdma_process_event() calls by
nvme_rdma_process_event_start() calls.
nvme_rdma_ctrlr_connect_qpair() sets rqpair->state to INITIALIZING
when starting to process CM events.
nvme_rdma_ctrlr_connect_qpair_poll() calls
nvme_rdma_process_event_poll() with ctrlr->ctrlr_lock if qpair is
not admin qpair.
nvme_rdma_ctrlr_disconnect_qpair() returns if qpair->async is true
or qpair->poll_group is not NULL before polling CM events, or polls
CM events until completion otherwise. Add comments to clarify why
we do like this.
nvme_rdma_poll_group_process_completions() does not process submission
for any qpair which is still connecting.
Change-Id: Ie04c3408785124f2919eaaba7b2bd68f8da452c9
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11442
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
After 7610bc38d, python modules are now located in the python/
directory. That patch also updated PYTHONPATH assignment in most of the
scripts, but one of the perf script and some docs/messages were missed.
Change-Id: Iff3588526f2a382e599f5734d38fc32c15a7bf56
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12223
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
From qemu 6.1 The use of qemu-img create that depends on a backing
file now requires that an explicit backing format be provided.
This is for safety: if QEMU probes a different format than what you
thought, the data presented to the guest will be corrupt.
Fixes: #2466
Signed-off-by: Jaroslaw Chachulski <jaroslawx.chachulski@intel.com>
Change-Id: I56ae7c71097edb387b14c8a042408cd6c50af4ee
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12268
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_vhost_dev structure should only contain generic fields
that are to be used by either vhost, vhost_blk or vhost_scsi
layer.
The vhost_user backend can hold its properties in
spdk_vhost_user_dev, which is maintained within rte_vhost.
Both structures contain references back to each other.
The reference in spdk_vhost_dev is a void pointer to
allow future transports to keep the reference
to their own structures.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I68640c524426d885c20242146365ba242fa9df8e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11813
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
In support of upcoming patches and to greatly simplify things,
the capabilites enum which held bit positions for each opcode
has been removed. Only the opcodes enum remains and thus only
opcodes are used throughout. For the capabiltiies bitmap a helper
function is added to convert from opcode to bit position. Right
now it is used in the IO path but in upcoming patches that goes away
and the conversion is only done at init time.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ic4ad15b9f24ad3675a7bba4831f4e81de9b7bc70
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11949
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Patch for not running tests if ASAN and
Valgrind options are both enabled.
Fixes#2422
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: I50c91bede687f0aee571c1f2540530a7fafcb49c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11998
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Crypto patch for increasing maximum number of crypto
devs applies to all DPDK releases since 21.11.
Change the conditionals so that the patch is applied
to any new DPDK version.
Also change the patch location to "21.11+" directory
to indicate that patch is not exclusive for 21.11
version.
Change-Id: I341f88958c6bf6c4d77909a06bf7ce91200cb70e
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12159
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Michal Berger <michallinuxstuff@gmail.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Previously spdk_vhost_dev_backend held callbacks
for vhost_blk and vhost_scsi functionality, along
with ones that are called by the vhost_user backend.
This patch separates out those callbacks into two
structures:
- spdk_vhost_dev_backend - to be implemented by vhost_blk
and vhost_scsi
- spdk_vhost_user_dev_backend - is only implemented by
vhost_user backend, callbacks for session managment
specific to that transport
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I348090df5dddeb2b1945b082b85aec53d03c781b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11812
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Set the GPIO pin to HIGH during trap command.
This is to avoid errors in other test suites, when
hardware hotplug test returns with an error.
Change-Id: I953d42b8f87196a072c3b4530a38b9bf59c62316
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12155
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
QEMU version 6.2.0 update required due to
an error while configuring the installation.
On Rocky Linux, this prevents image building
by Packer.
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: Ibea66d927513c2716a5c53f62e6a043a081f2f62
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12094
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This test was written before reset was supported on NVMe-oF devices. It
should be working now, so go ahead and test it.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ifce04542c4a6fdef1a33d094a5ea8d504dee6f24
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11595
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
there is no group
The real implementation handles this by returning -ENOENT, so do the
same in the test.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I405b6f60bf4dcdb22c57e48bbaf66d57522a49c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11508
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Count disconnecting a queue pair as activity so that the unit test
poll_threads() calls don't bail out until the disconnectedd_qpair_cb is
called at least once.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Idc437d6c589dbf133bfcbb5edba1087f928a718c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11507
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
This was neither set nor used.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I3119135843c5fc0b8724e593db40df46e6b5bdb0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12097
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
- MLX5 crypto device setup and run in blockdev.sh.
- Using "env_context" FIO config field to run FIO perf tests on MLX5
device.
- Wait a bit longer for tgt to start since MLX5 allocates descriptors
longer than the others.
Signed-off-by: Yuriy Umanets <yumanets@nvidia.com>
Change-Id: I282872cf86528283a3a59e0a787ff516181d534e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11634
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is done to make sure we don't miss more complex setups where
target devices are not mounted but still hold some valid data that
shouldn't be touched in any way.
Also, adjust function names so they clearly indicate what is being
checked.
Signed-off-by: Michal Berger <michallinuxstuff@gmail.com>
Change-Id: Ibb0f1f21de68009a2f8f1faf4595a07ae527da35
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11111
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Up until now, importing an SPDK RPC python module was just a matter of
`import rpc`. It's fine until there's another module called `rpc`
installed on the system, in which case it's impossible to import both of
them. Therefore, to avoid this problem, all of the modules were moved
to a separate directory under the "spdk" namespace.
The decision to move to a location under a separate directory was
motivated by the fact that a directory called scripts/spdk would look
pretty confusing. Moreover, it should make it also easier to package
these scripts as a python package.
Other than moving the packages, all of the imports were updated to
reflect these changes. Files under python now use relative imports,
while those under scripts/ use the "spdk" namespace and have their
PYTHONPATH extended with python directory.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib43dee73921d590a551dd83885e22870e72451cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9692
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This test reproduced issue #2428. It does the following:
1) submit some large writes (requiring R2T or RDMA READ)
2) submit fused compare (first fused)
3) variable number of qpair polls
4) submit fused write (second fused)
The RDMA and TCP transports were not accounting for the
fused bits, and would send a non-fused command down to
the target layer between the two fused commands.
By adding the variable amount of delay between the fused
command submissions, it creates a window where a large
write's payload is fetched from the host and submitted
to the target between submission of the two fused commands.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1abd5a6bca08386279c09f8135387826149d30ef
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11963
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Rename hotplug.sh to sw_hotplug.sh (software hotplug)
and refactor its code in preparation for new software
based hotplug test.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I751fc60ee013de341e064c83f0be3a9b404008e7
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8834
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Adds an option to wait for a bdev to appear
when issuing bdev_get_bdevs in waitforbdev.
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: I2f989a2cc5282049182834b67629f2fa11122105
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12131
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The concat module can combine multiple underlying bdevs to a single
bdev. It is a special raid level. You can add a new bdev to the end of
the concat bdev, then the concat bdev size is increased, and it won't
change the layout of the exist data. This is the major difference
between concat and raid0. If you add a new underling device to raid0,
the whole data layout will be changed. So the concat bdev is extentable.
Change-Id: Ibbeeaf0606ff79b595320c597a5605ab9e4e13c4
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11070
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To execute a callback function for each registered bdev or unclaimed
bdev, add new public APIs, spdk_for_each_bdev() and
spdk_for_each_bdev_leaf().
These functions are safe for race conditions by opening before and
closing after executing the provided callback function.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I59b702ffec7b4fc5e9779de5a3a75d44922b829b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12088
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
