Ftl should no longer require 4k alignment for I/O buffers for either
internal or external requests. The 4k alignment was needed due
to a bug in QEMU when handling internal SGL buffers in LNVM commands.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: Icafc14b7811c9c0ffa13789e341c453503cf2821
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460106
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
DPDK defines the minimum alignment as "suitable for any
kind of variable (in the same manner as malloc())", but
internally the alignment is always rounded up to the
cache line size, even if the requested alignment is 0.
We would like to start relying on this behavior in FTL,
where lba maps are allocated using DMA-able memory and
are constantly looked up or modified by different threads.
By having the lba maps unaligned, we risk having those
threads pollute each other's cache lines.
Rather than enforcing this memory alignment in FTL, we
do it in spdk_*malloc directly. In general it makes
sense to have DMA-able memory always cache-line-size
aligned for the same reason as above.
Change-Id: Ib6edda4a7bf3f4952eb1875a4e1753be96bed642
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460329
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If the log level of the output log is higher than
the process's log level, the system does not output
it, so we needn't generate the formatting logs.
Change-Id: I36be0e6807ed575fcbf1d0ae01f064a6ca2c4539
Signed-off-by: Huiming Xie <xiehuiming@huawei.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462790
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Issue reports:
vbdev_crypto.c:695:12: warning: The left operand of '+' is a garbage value
iv_ptr = rte_crypto_op_ctod_offset(crypto_ops[crypto_index], uint8_t *,
Change-Id: I1a4f89111e94a13d8daf38070aa69306783a83c5
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462576
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
During PCI bridge initialization not all
registers was cleaned properly.
Change-Id: Ie0752bb303ba06e2a21669908efd9f746f6b0039
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460197
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
On Fedora30, GCC9+ reports errors:
Issues report:
vbdev_compress.c:482:17: warning: Assigned value is garbage or undefined
comp_op->m_src = src_mbufs[0];
^ ~~~~~~~~~~~~
vbdev_compress.c:502:17: warning: Assigned value is garbage or undefined
comp_op->m_dst = dst_mbufs[0];
^ ~~~~~~~~~~~~
vbdev_compress.c:491:3: warning: 1st function call argument is an uninitialized value
rte_pktmbuf_attach_extbuf(dst_mbufs[iov_index],
compress_ut.c:826:2: warning: Attempt to free released memory
free(g_mbuf_mp);
^~~~~~~~~~~~~~~
Should remove free(g_mbuf_mp), for pointer exchange.
Change-Id: I1a48b7c309a4e2aa0aa513f9be44ae3504d9e385
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462574
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
As spdk_jsonrpc_begin_result() is not allowed to return NULL we can
remove these checks. We didn't have any tests cases that goes this path
anyway.
Change-Id: I0894e76c0162591e550e70b172566b9060a6dd5f
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459199
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Code on line 613 should never be reached for last
chunk on the band, since it is checked on line 606.
This assert verifies that, all chunks before last
are not NULL.
Change-Id: I78a9967f91c0873981b3308e888d85fa7c8d6641
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462488
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Moved the spdk_bdev_io_get_iovec() after the verification that io
succeeded.
Then added return path when iov could not be retrived from bdevio.
Change-Id: I2638e6657fd08a2dd85ab0906383cecef8fb4f4a
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462507
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Admin can enable user and add user to locking range.
Then the user can lock/unlock his range.
Change-Id: Ifc5a8cf5c6b5febeb59c86333981f0cf5b938500
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460891
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There are many req leaks when a controller failure
occurs during submitting IO. It must free all of
the children before freeing the parent req.
If a part of the child req has been sent to the back end
and a part of the child req fails, removes the failed req
from the parent req and the parent req must be retained,
freeing the parent req after all of the submitted reqs return.
Change-Id: Ieb5423fd19c9bb0420f154b3cfc17918c2b80748
Signed-off-by: Huiming Xie <xiehuiming@huawei.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Existing children split functions defined in nvme_ns_cmd.c can
also be used in nvme_qpair.c to free children requests with error
paths.
Change-Id: I640b32884424709da67ee89ff780c2de45acc54c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461372
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
move the staement location of TCP request setting and remove
the duplicated code.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ia659756185547ff4f8aa26c5bc01f63defe6c113
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462589
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We already have send buffer allocated. This will greatly improving code
as we guarantee by design that there is always JSON write context
object.
Change-Id: Id487c01448e1a65d9d4ef76d40a2a9f178b2f570
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459341
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This priority is used to differentiate the sock priority on the TCP connections
between NVMe-oF TCP target and other TCP based applications.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I6ee294e647420b56d1d91a07c2e37bf34ce24e03
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461801
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If subsystem bdev module initialize failed, it will call
spdk_bdev_init_complete(-1) -> (subsystem bdev)->fini
_spdk_bdev_finish_unregister_bdevs_iter -> spdk_bdev_module_finish_iter
In abovt path, spdk_bdev_module_finish_iter will repeate to call
bdev_module->module_fini function. Some bdevs will call spdk_io_device_unregister
which never call spdk_io_device_register. It will coredump when assert false in
spdk_io_device_unregister dev is null.
To fix this, let's check whether g_bdev_mgr.module_init_complete is equals true
and then call the bdev_module->module_fini.
Change-Id: Ia9a13318720d954e40eb2d666574bcb86e5f49e3
Signed-off-by: Tianyu Yang <yangtianyu2@huawei.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462382
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Improve error messages where possible.
Modify spdk_bdev_rbd_create() to return instead instead
of pointer for better return code handling.
Change-Id: I5fcf90794f5fe44296422c654c5f8d404f3d5eef
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461884
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Adding some extra debug information for any failing IOs.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: If38de30bcb80d291778ad7325a33b7786d02390d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461588
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These arguments are obligatory and spdk_json_decode_object will
fail even before we reach the if block.
Change-Id: I3c17faf570aefc7d96d009a595cf3a76994977e7
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462043
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Improve error messages where possible.
Modify parts of the code so that it follows the same pattern
as in previousle changed bdev modules.
Change-Id: I6672a14900326029c670bfca99a6d085093861c3
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461553
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Purpose: This API can be used to set the socket
with different priority.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I9df1122bf6ae640eba731e635a1784f4e9da4104
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461738
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
lvol_name is not an optional argument when creating a lvol bdev.
Also removing unnecessary if block.
Change-Id: I7d5790d648bce7f02bfed34bd714162d3ccb10ab
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461861
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
These arguments are obligatory and spdk_json_decode_object will
fail even before we reach the if block.
Change-Id: I295649629770ef062086308257da83a8bab44588
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461860
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Eliminates need for memset on parts of our scratch buffer
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I00b7213d3c15562ceeda4d7a3ac2bb7cfd41bf66
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460010
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Purpose: To eanble the transport based scheduler in RPC.
Previously, we only support it with configuration file.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I02ae9b1b316d4fec8b28b550e70dcdc78ce78722
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461645
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: I5bcac50baca785255eb068086e67c07d120b042f
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459432
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: Ic42db528bbae4b3ca2e91cb9ac46def99ecb5f28
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459431
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: If0bcdf2be9756b343375f02837a414d3b86f2bca
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459430
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
No need to have it under lock. Additionally in case of failure
there was a lack of rdma_destroy_id(). This is addresed within this
change as well.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Idbb36d51ad4ef7ef81051463f56efc87ef00c966
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462054
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In case of failure during pd or map allocation freeing list of devices
was missing.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: If62f7b072f3894fd1a7e856c19b4ea51646dd20e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462079
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Remove linux #ifdefs from the vhost code and just
implicitly disable CONFIG_VHOST for BSD systems.
This serves as cleanup.
Change-Id: I8b0e0e8f80478f50ca8586cc974f7afcee2566f0
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460562
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Now that vhost closes bdev descriptors on the same thread
that opened them, we can reintroduce thread asserts into
the bdev layer.
This reverts commit 283abcb9a2.
Change-Id: I1acc455df0674b808ecf2fa58dffd183db6cf3c2
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459168
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We used to allocate a ctx whenever new event had to
be sent, but since all events in foreach_session are
always called in a chain, we could allocate one ctx
at the start and then re-initialize it before sending
each msg.
Change-Id: Ie5477b07242f0c6eb6dc2160055a829da8ba5d11
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459167
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
foreach_session() is used to e.g. close a bdev, where
for each session we close any io_channels and then,
on the final "finish" call, close the bdev descriptor.
The vhost init thread is the one that called
spdk_vhost_init() and also the same one that calls
all management APIs. One of those is for hotplugging
LUNs to vhost scsi targets, which practically results
in opening bdev descriptors.
By always scheduling that final foreach_session()
callback to the init thread, we end up with calling
spdk_bdev_close() always on the same thread which
called spdk_bdev_open(), which is actually a bdev
layer requirement.
Change-Id: I2338e15c63f93ef37dd4412dd677dee40d272ec2
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459166
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We used to call potentially-asynchronous foreach_session()
in vdev initialization path and that was perfectly
fine because at that time there were no sessions created
and foreach_session() was always finishing synchronously.
We're about to refactor it to be always asynchronous, and
for this coalescing case it could complicate the init
error path. Once asynchronous thread msg is sent, we would
need to wait for it to complete and we just don't want to
do that. We want error handling to be simple.
Since we know there are no sessions at the time of vdev
creation, we just add a new function for setting coalescing
params just for vdev (and not for its sessions) and we
use that function in vdev init code.
Change-Id: I44d204d03b5040525e4871693678d4b4a0204e63
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459196
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Put it next to other functions in this call chain.
Change-Id: Ic621855b028f9bd110cdcda86b3a182369ec5e90
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459165
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Put it next to other functions in this call chain.
Change-Id: Ieafd91c6cfefec134594aec8671eb4efdac15dfe
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459164
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_ prefix should be only used on public API functions.
Change-Id: I663b107bd6b1c92c2c6263f2ec7c763d9812e7fe
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459163
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Despite its name, this function is defined as static
and is only used in one place, so inline it.
Change-Id: I4e217b3baae9b735761f5497f06b681a118860e9
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459162
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
By making dpdk device detach asynchronous we have
actually broken some cases where devices are re-attached
immediately after and fail since they were not detached
yet, so now we're making device detach synchronous again.
For that we'll simply wait inside spdk_pci_device_detach()
for the background dpdk thread to perform all necessary
actions before we return. We'll also print an error msg
if DPDK failed the detach (probably because of some
internal error).
Change-Id: I7657ac1b169169eae3325de2d28c2cc311e7d901
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460286
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <jacek.kalwas@intel.com>
By making dpdk device detach asynchronous we have
actually broken some cases where devices are re-attached
immediately after and fail since they were not detached
yet.
We'll need to make detach synchronous again, and for that
we'll wait for the background dpdk thread to perform all
necessary actions before we return from spdk_pci_device_detach().
However, device detach could be triggered from the very
same dpdk background thread as well. Waiting there would
cause a deadlock, so now we'll schedule asynchronous
device detach to the dpdk thread only if we're not on
that thread already.
This patch itself serves also as an optimization.
Change-Id: I86b7ac1b669169eee3325de2d28c2cc313e7d901
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460285
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Latest DPDK moved some definitions around and we don't
compile with it right now. Adding the missing include
fixes it.
Change-Id: I9b0a915632996acfedbcf3d0f03feed986889a2d
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460905
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: I140e10b2fd07efb48e664cfa00e1d60f604abd21
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449797
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In case of pd allocation by nvmf hooks there is a lack of null
check as oposed to pd allocation by ibv_alloc_pd.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Iead6e0332bdee3da4adb6e657af298215c4e2196
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461576
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Since the local is only used in the SPDK_DEBUGLOG call, it was causing
the build to fail when the configure options --disable-debug and
--enable-werror were supplied together. This can be seen in the most
recent nightly builds.
Change-Id: I32112cf832a705292783da4e841badaeed17dbb6
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461746
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This change attempts to address the Trello request to decode I/O errors in
NVMe hello_world example.
See https://trello.com/c/MzJJw7hM/2-decode-io-errors-in-nvme-helloworld-example
As part of this change, spdk_nvme_cpl_get_status_string was declared
in nvme.h, and spdk_nvme_qpair_print_command and
spdk_nvme_qpair_print_completion were renamed and added to nvme.h,
allowing all three to used "externally."
To test the failing paths, two compile time defines were added to force a
write or read error (bad LBA) respectively.
As the example does a read after write, if the write fails, the example fails.
Signed-off-by: James Bergsten <jamesx.bergsten@intel.com>
Change-Id: Ib94b4a02495eb40966e3f49517a5bdf64485538a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457076
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The __sync builtin based implementation generates full memory
barriers on some non-x86 platforms. Replace it with C11 atomic
builtins can make:
·arm and ppc from full barrier to half barrier
·x86 code same as before
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Change-Id: Ib6624ef8e45af497b9eced6ecfa7710bcc88a733
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461590
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
md_start and md_len are values in pages rather than lba.
Those should not be compared against lba of currently
loaded md page.
This patch changes assert to verify if the lba of current
page does not exceed max lba where md is expected to be.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id445eb9871f82f7fe367bfc396f1b495591511c1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460976
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Blob id only is matched to the very first page of md for
that particular blob.
During loading blobstore, we shouldn't verify
further pages in chain against the blobid.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ifc7863ddcb403aedc264c14e6b4c3915bd30dc41
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460607
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This patch adds statistics for BDEV IO pending state in NVMf subsytem
which may help to detect lack of resources and configure pool size
correctly.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I6c60c27efe3efed194b2d2c46a707af7c2808fe9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445290
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This patch adds number of admin and IO queue pairs per poll group in
NVMf statistics. It can be useful to troubleshoot load sharing issues.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I2a9c0fc99cf5d0729eb130d30540ae52b5207fc9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445288
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This patch adds nvmf_get_stats RPC method and basic infrastructure to
report NVMf global and per poll group statistics in JSON format.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I13b83e28b75a02bc1dcb7b95cbce52ae10ff0f7b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452298
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
If the data from non-volatile cache was recovered, but the state of the
cache isn't clean (i.e. no range overlap, two different phases at max),
scrub it, so that subsequent recovery can be performed successfully.
Change-Id: Ic8b5cbb6e02444bc99d4700bfe3dfbb33f06ef24
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459622
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
The cache needs to be scrubbed during the initial device creation as
well as after power loss recovery. This patch extracts the scrubbing
code into a separate function.
Change-Id: I2cb32e6993a3531470f29f466d990f0d96e45def
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459621
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
The header is being written from multiple places, so having a discrete
function serializing and writing it at the appropriate place in the
cache makes sense.
Change-Id: I7a1e6ebd05e8a4974d141f04202803f507b978e4
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459620
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
This patch adds a function that marks all active open bands to be
flushed and once all of them are closed it notifies the caller. This
needs to be done before the data from non-volatile cache can be scrubbed
to make sure its stored on bands the device can be restored from.
Change-Id: I9658554ffce90c45dabe31f294879dc17ec670b9
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459619
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch makes sure we're on the thread that requested creation /
deletion of the device when calling the notification callback.
Change-Id: Ia11a8054692874f6b57d4ebe3e3cb290c58e83b6
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459618
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Added ftl_dev_has_nv_cache to check if the FTL is configured to use
non-volatile cache or not. It makes these checks a bit more readable.
Change-Id: I0140df184d89a675e40bd5056718cd64301c553e
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459617
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Wait until all user writes are completed before writing band's metadata.
Otherwise in case of power loss, user data might not get written while
the metadata does, which would result in data loss.
Change-Id: I419862960c072e38265b91d0d0498ff0c6f9f29e
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459615
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use the data placed on the non-volatile cache to perform recovery in
case the device wasn't shut down cleanly. The write phase ranges are
read and their data is copied onto the OC device.
The code added in this patch will correctly copy the data from
overlapping ranges, however it won't do anything about these overlapping
areas, so subsequent power loss happening quickly after recovery might
result in data loss.
Change-Id: Ib4c66092cee858496ec66f789fcfb1e7e32f5c20
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458105
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Scan the cache to find ranges of blocks written with the same phase.
This prepares the structures needed to perform data recovery from the
non-volatile cache.
Change-Id: I0c901d010d6ca76feabca13116d831c1d9931833
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458103
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
The structures in this module had no comments, so it was a bit hard to
understand what they're used for.
Change-Id: I439c8a792f02b929006c60933e6b272751b1a675
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458102
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Moving data from one band to the other doesn't need to be stored on the
non-volatile cache. Not only does it add unnecessary traffic to the
cache (wearing it out and reducing its throughput), but it requires us
to synchronize it with user writes to the same LBAs.
To avoid all that, this patch adds the FTL_IO_BYPASS_CACHE flag to all
writes coming from the reloc module. However, to be sure that the moved
data is stored on disk and can be restored in case of power loss, we
need to make sure that each free band have all of its data moved to a
closed band before it can be erased. It's done by keeping track of the
number of outstanding IOs moving data from particular band
(num_reloc_blocks), as well as the number of open bands that contains
data from this band (num_reloc_bands). Only when both of these are at
zero and the band has zero valid blocks it can be erased.
Change-Id: I7c106011ffc9685eb8e5ff497919237a305e4478
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458101
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Some of the writes doesn't need to go through the non-volatile cache
(e.g. relocations, data recovery from the cache). This patch adds IO
flag to indicate that the write shouldn't be stored on the non-volatile
cache.
Change-Id: I3d485fe14cf25b3074832f26491ba0cb12ff0e58
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458100
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Initialize children IOs with the appropriate LBA of its parent when
allocating internal IOs.
Change-Id: I191ad741b9d88d7f18cae05982e0a06a8f371f78
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458099
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
This patch adds tracking of the phase of the writes to the non-volatile
cache. The phase is changed each time the whole buffer is filled. Along
with every block's LBA, current phase is stored in its metadata. This
allows for replaying the sequence of writes when recovering the data
from the cache after (unclean) shutdown.
Since there are only three possible phases to be stored on the device at
a time, phase is defined as a 2-bit counter cycling through 1 -> 2 -> 3
-> 1, with 0 marking blocks that were never written.
Change-Id: Id47880367934027fd102c32f183110acc9d4c62a
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458098
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
After filling whole non-volatile cache, block all further writes until
the header with metadata is written. This means that metadata stored on
the device will always be up-to-date with the most recent write
sequence.
Change-Id: I15b724b52814289622374ce77e5c3b23173a75c6
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458097
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Check the type of DIF used by the bdev specified as the non-volatile
write cache. If it's anything other than SPDK_DIF_DISABLE, fail the
initialization, as we don't support any other type yet.
Change-Id: Ie8bc1729558e055989d7925bc55f6307ee738f0e
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458096
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
When restoring the device, read the first block of the non-volatile
cache containing its metadata header and verify that it's indeed a
device that was used as write cache.
Change-Id: Idf113a9e8eb73160a2d9e6e882c9e026d3fafb3e
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458095
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When creating FTL device using non-volatile cache, zero out the
non-volatile cache and store metadata (device's UUID, size of the cache)
in the first block.
Change-Id: Id8f212aef756e86e8a215582ab7c32a635e18938
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458094
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
In case some module has `async_init = true` and
some other module that comes after it fails to initialize,
then callback from asynchronously initialized module
may call `spdk_bdev_init_complete()` first, then failed module
will call `spdk_bdev_init_complete()` later.
This currently results in NULL dereference because
first call to `spdk_bdev_init_complete()` sets `g_init_cb_fn = NULL`.
This change prevents first call to `spdk_bdev_init_complete()`
by saying that failed module is not finished with initialization.
This patch fixes#847
Change-Id: Ib6b231d5ea27896ad88d7f11b8732921077b3d4d
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461230
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
In the memcpy elimination patches, the same bug exists in 3
places. When building req->decomp_iov using the host buffers,
req->decomp_iovcnt was being incremented in the loop and also
being used as part of the index messing everything up.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I485ac32502801c1e11b8392b2df7eba06b4f5a9b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461053
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The first optimization to eliminate memcpy was too aggressive and
did so for the read-modify-write operation as well. This didn't
affect the fio tests used that the time but bdevio catches it
right away. When over writing a chunk with data, we first need
to read the old data before applying the new. This patch uses
the scratch buffer for old data as sending it to the user buffer
results in it not being written at the end of the read-modify-write.
There is at least one more bug fix coming after this also found
with bdevio but passed with fio
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I8fe074056434bb4757c68077e2df446861edfd94
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461032
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
iSCSI target does not allocate data buffer on read, and delegate
allocation to the bdev.
When the bdev is a split vbdev, the split vbdev does not allocate
data buffer and delegate allocation to the backend bdev.
In this case, iSCSI target expects the buffer is allocated until
notifying completion to the split vbdev. However, the split vbdev
notifies completion to the backend bdev when calling the callback
of iSCSI target. The backend bdev frees the buffer immediately,
but iSCSI target still uses the buffer. If the buffer is reused
by another I/O, data corruption will occur.
For this issue, vbdev_gpt_submti_request() calls
spdk_bdev_io_get_buf() when the I/O is read, and its callback
vbdev_gpt_get_buf_cb calls _vbdev_gpt_submit_request() then.
This will ensure the buffer is allocated before forwarding I/O
to the backed bdev.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifb2eac500276ab5012123b7d6f7eb033d87ad17c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461350
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
iSCSI target does not allocate data buffer on read, and delegate
allocation to the bdev.
When the bdev is a split vbdev, the split vbdev does not allocate
data buffer and delegate allocation to the backend bdev.
In this case, iSCSI target expects the buffer is allocated until
notifying completion to the split vbdev. However, the split vbdev
notifies completion to the backend bdev when calling the callback
of iSCSI target. The backend bdev frees the buffer immediately,
but iSCSI target still uses the buffer. If the buffer is reused
by another I/O, data corruption will occur.
For this issue, vbdev_split_submti_request() calls
spdk_bdev_io_get_buf() when the I/O is read, and its callback
vbdev_split_get_buf_cb calls _vbdev_split_submit_request() then.
This will ensure the buffer is allocated before forwarding I/O
to the backed bdev.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Icfd0663b548479ac0bf6b5b49420f144142e3300
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461348
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Now that the resume path can correctly handle the case where a namespace
was removed and a new one added with the same nsid, this no longer needs
to be asynchronous.
Change-Id: I693045e66a7d4e75255b526d8f5ca5ef8695533e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459606
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When using stacked virtual bdev (e.g. split virtual bdev), block
address space will be remapped during I/O processing and so
reference tag have to be remapped accordingly.
This patch adds an new helper function spdk_bdev_part_remap_dif
and call it before submitting write I/O or after completing read
I/O.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idfc6081893861d412c19a9edfb348a7faa7e8c5b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461106
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
All IO types but reset have used the remapped offset to submit I/O
to the base bdev. Previously each IO type had got the remapped
offset by itself. Consolidating it into a place will improve
readability and will be helpful for the next patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I29465e92d8fb62e45cfc97c52fedaa661b2f0602
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461105
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When using stacked virtual bdev (e.g. split virtual bdev), block
address space will be remapped during I/O processing and so reference
tag will have to be remapped accordingly.
This patch adds an API, spdk_dif_remap_ref_tag to satisfy the case.
UT code is added together in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I55cc45c475d4e86e736f5712baf02fcabfde3c82
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461104
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When using stacked virtual bdev (e.g. split virtual bdev), block
address space will be remapped during I/O processing and so reference
tag will have to be remapped accordingly.
The use case is explained in detail as follows:
- Format a single NVMe SSD with DIF enabled.
- Create a NVMe bdev on the NVMe SSD with DIF enabled.
- Create four split vbdevs on the NVMe bdev.
- Add the split vbdevs to a NVMe-oF target.
- Application is aware of block address space of the split vbdevs.
- Application submits read/write I/O to the NVMe-oF target.
Case 1:
- Configure NVMe-oF target to DIF pass-through.
Case 2:
- Configure NVMe-oF target to DIF insert/strip
For the case 1,
- Application inserts DIF for write I/O and verifies DIF for read I/O.
- The split vbdevs remaps reference tags of DIF both for read and write
I/O because application expects reference tags are based on the
block address space of split vbdevs.
- The NVMe bdev processs read/write I/Os without remapping reference tags
because reference tags are already based on the block address space
of the NVMe bdev.
For the case 2,
- NVMe-oF target inserts DIF for write I/O, and verifies and strips
DIF or read I/O.
- The split vbdevs remaps reference tags of DIF both for read and write
I/O because NVMe-oF target expects reference tags are based on the
block address space of split vbdevs.
- The NVMe bdev processs read/write I/Os without remapping reference tags
because reference tags are already based on the block address space
of the NVMe bdev.
This patch adds two APIs, spdk_dif_ctx_set_remapped_init_ref_tag
and spdk_dif_remap_ref_tag to satisfy the use case.
UT code is added together in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib3101129225b334d2f578eab75197790b1818770
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461103
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In future patch in new spdk_bdev_open_ext function we will call
spdk_bdev_get_by_name function and after that call and before
calling old spdk_bdev_open routine bdev can be removed.
We need to add mutex which will prevent that. Any future code
should use this mutex when accessing the bdevs list to get
a bdev and perform some operation on it.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I785a1791346aebdd394fc51ad0e7fbfbabf317c9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458457
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Length of xattr descriptor is equal to length of xattr struct,
xattr name and the len of stored value.
There is no limit to how much can be stored in memory for xattr.
On disk xattr size is limited to single page and within that to
max descriptors that can fit in it.
This size is known at compile time.
Before this patch it was possible to add xattr exceeding
what was possible to be written to disk. This caused issues
when serializing the metadata during spdk_blob_sync_md()
or spdk_blob_close(). Making those fail without specific info
to the user and not actually writting such descriptor.
Since maximum length of xattr descriptor is known at compile time,
this patch compares against this value when setting the xattr.
It will immediately report back to user with error, and will
not store xattr in memory (thus not serialize it).
This patch should not affect any backward compatibility for blobs.
Too large xattrs weren't written to disk before,
API for blobstore stays the same - only reporting ENOMEM
when it should.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6f4af4d079e47f084e20d7a4969d9a78ec1f8610
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460450
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Set DIF context of the corresponding request to PDU when
- processing in-capsule data of the command,
- processing data of C2H PDU, or
- processing data of H2C PDU.
Change-Id: I3a668a55be21dbe2ee6ecf26476290670bd7b4a8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458929
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
When NVMe/TCP initiator transfers in-capsule data, NVMe/TCP has to
process it as in-capsule data. If DIF insert/strip is enabled,
in-capsule data size will be increased by NVMe/TCP target to insert
metadata. However size of in-capsule data buffer had not been
increased, and buffer overflow occurred when NVMe/TCP initiator
transfers in-capsule data to NVMe/TCP target with DIF insert/strip
being enabled.
This patch increases size of in-capsule data buffer size to store
metadata. 16 byte metadata per 512 byte data block is the current
maximum ratio of metadata per block.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I88b127efd7a945bde167a95df19a0b9175cb8cd0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461333
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
We updated readv_offset before generating DIF to avoid adding
the temporary variable _rc in the previous patch, but that caused
write error when inserting DIF.
Fix the bug in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id0788280a83cbea2554c851db77751432fc00cba
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461116
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When handling the capsule command header, call spdk_nvmf_request_get_dif_ctx
by passing the NVMf request and the reference to the DIF context, and set
the flag dif_insert_or_strip of the NVMf/TCP request to true.
spdk_nvmf_request_get_dif_ctx returns false immediately when the
corresponding NVMf controller disables DIF insert/strip.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I16f6b322f2692d5f9653d011a490e7929ec37365
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458928
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
