If we fail to allocate all of the params, we should free
the ones we did.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I0f0be6320b27211e3713d9b79b5a0b0ed103e7d2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2007
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
As other small change, function iscsi_conn_pdu_generic_complete()
had been declared in conn.h but defined in iscsi.c. Move the
definition of it to iscsi.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1bd796288036f78a7cba8a1c0af93bd6bc19e9cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1890
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
spdk_iscsi_tgt_node_reset() is not implemented and the code to
call it is commented out. We will have to implement them from scratch
if we do. So remove them in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I63618b0f8857cb23b57f5a92ec363a91c1d5a912
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1885
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
The following patch will remove the "spdk_" prefix from iSCSI
internal APIs. The iSCSI global data g_spdk_iscsi is also local in
SPDK iSCSI library. Hence rename it by g_iscsi for consistency.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If35e9d58b1388fd725a505ee9be870e414c37ba5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1831
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We will be create fine name for each poller but it will need large
effort. Replacing spdk_poller_register by the macro SPDK_POLLER_REGISTER
will provide better name than function address with minimum effort.
Following patches may improve function name for clarification.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If862a274c5879065c3f7cb04dcb5ca7844523e68
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1781
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Community-CI: Broadcom CI
This patch does drop in replacement of SN32_LT and SN32_GT by
spdk_sn32_lt and spdk_sn32_gt, respectively.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5df1e461d2b25a2f20222e823fb1ec68ced049ad
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1347
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
iSCSI target got segmentation fault if connection is being exited
between spdk_iscsi_conn_write_pdu() and its callback
iscsi_conn_login_pdu_success_complete() are executed.
This was caused by recent asynchronous socket write feature.
Fixes issue #1278.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idffd90cd6ee8e6cb4298fe3f1363d8d5c5a3c49d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1275
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: wanghailiang <hailiangx.e.wang@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
To avoid partial write issue of this PDU.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Id9b22da844c75ae53c6881850d192b40ac4098ac
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481948
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Purpose: To prepare for the further patch submission.
Since we do not need to keep this variable too late.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ibaa100925e1ea317253d4fe7e560917e063fcf6b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482290
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Since only after DATAIN pdu sending out, we can have
free slot to handle queued data in tasks.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I49a52597e8660453ea90c5960d020eb53f81265d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482048
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is prepared for the further call back usage.
Change-Id: Iccf304c87e67debfb4e7c330acc9cc233cc3ec48
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481917
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Followin the last patch, move iscsi_conn_abort_queued_datain_task()
and iscsi_conn_abort_queued_datain_tasks() from iscsi.c to conn.c.
Refine unit tests to check more accurately. Adding more test cases
will be done later.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I30530e6871a78a58d9fb472f62168862298884a0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477417
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Operations to queue iSCSI tasks are in iscsi.c and conn.c and cross
references due to this separation makes us difficult to create unit
tests.
This and subsequent patches will try to disentangle cross references
by moving some functions from iscsi.c to conn.c.
This patch moves spdk_iscsi_conn_handle_queued_datain_tasks() from
iscsi.c to conn.c. For unit tests, we don't add anything new in
this patch and just create necessary simple stubs. After code
movement, new unit tests will be added.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If5b8501a1ef7ea53682a3437c7eb2375aa52ee3b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477416
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Subsequent patches will move a few functions which call
iscsi_queue_task() from iscsi.c to conn.c. This patch is a
preparation to it.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id136b5d3bf76a9894162115dd0d57d997178c869
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477415
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The macro DMIN32/64() are local in iscsi.c. Replace them by the
generic macro spdk_min() will improve the portability.
Replace it in test/unit/lib/iscsi/conn.c/conn_ut.c together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5f6992b3dc091cd748b4e138810fb01761a1ab24
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477202
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is a preparation to replace the private macro DMIN32/64() to the
generic macro spdk_min(). The corresponding input variables of
struct spdk_scsi_task are uint32_t, and so uint32_t are usable.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Icbf8ba1dfa0b170635a2852e6f0e9d841da9741b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477201
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_iscsi_send_nopin() is called only in a single place of conn.c.
So change it to private in conn.c. Additionally, iscsi_conn_send_nopin()
may be a little more meaningful and rename to it.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1fe70e0468e1dd43468492b8b3d359c094130ed7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477190
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_iscsi_is_deferred_free_pdu() is called only in a single
place of conn.c. So change it to private in conn.c. Additionally,
iscsi_is_free_pdu()_deferred() may be a little more meaningful
and rename to it.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic1e3d7ff435c454f40e81f9a4f90fe76589ec7b2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477189
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We changed read I/O submission to stop splitting when detecting LUN
hotplug very recently. We can do the same refinement for read I/O
abortion.
In _iscsi_conn_abort_queued_datain_task(), set all remaining length
to the new task and complete it immediately. We keep the code to
process the case that queued_datain_task completed but is still in
queue, but we can change its if condition to assert.
Simplify the corresponding unit tests accordingly, and set
task->scsi.transfer_len in abort_queued_datain_tasks_test() to
exercise the changed paths.
In iscsi_pdu_payload_po_scsi_read(), if task->scsi.transfer_len is not
larger than SPDK_BDEV_LARGE_BUF_MAX_SIZE, no minimum calculation is
necessary and we can substitute task->scsi.transfer_len to
task->scsi.length simply. This change is too small to be an independent
patch and is done together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iea93e51b103eae141a007a0abdaf13cbe6d5287f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476984
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
In iSCSI library, macro MATCH_DIGEST_WORD() and MAKE_DIGEST_WORD()
have been used instead of match_digest_word() and make_digest_word().
The latter has not been used for a long time. Hence remove them.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0fdb5c24a120a08fe06f825ee5e6c24ba64c0edf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476416
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This log has been observed often after recent refinements but
this log does not mean any error. So use SPDK_DEBUGLOG instead
of SPDK_ERRLOG here.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3aa39ab3773ae83586c99699fd2473ca02c35eb9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475182
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch series orders login related functions top down in iscsi.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I23ea7101030c6d2d3fbccba878bdf77d89b814cf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476415
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch series orders login related functions top down in iscsi.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I39431b213216b1e4e677f80de8c14c40dd7da150
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476414
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch series orders login related functions top down in iscsi.c.
Other than code movement, fix a typo.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib55fe86295f47c1c86bb99d5e3a6862f508bfcfa
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476413
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch series orders login related functions top down in iscsi.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I82fe06e3488a1c623c5fc875cf797790ee4ea48f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476412
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch series orders login related functions top down in iscsi.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2f7dd681ca430c810dac6fcea122f84a142152d7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476411
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch series orders login related functions top down in iscsi.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8e123177124b4526e9bbe9001293c6f668b9c3bb
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476410
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
conn->data_out_cnt does not control anything now but adding assert
for conn->data_out_cnt will be helpful at least to ensure that the
current SPDK works correctly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I31ee90769ce0555e64bd41c283e8b437326efebf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476409
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
When a iSCSI write is large and split, if LUN is removed between
creating and submitting the last subtask, spdk_clear_all_transfer_task()
completes the primary task and then process_non_read_task_completion()
tries to complete the primary task.
This is the double free case, and the later have to be skipped.
We add a flag is_r2t_active to struct spdk_iscsi_task and use it to
check the duplication. We may be able to use primary's initiator task tag
(ITT) instead but we can not rely on ITT because it is set by the initiator.
We clear is_r2t_active even when primary is removed from
conn->queued_r2t_tasks but it will be no harm.
Fixes the issue #1064.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia6511bd7adaa8fcb9a07bc40d498e8ee0b7a7ccf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475044
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The type of pdu deferred to be free only have
two types, R2T or DATA_IN. And the two types of pdus
are all assoicated a task, so updateing both the code and unit test case.
Also for all pdu free, we should use spdk_iscsi_conn_free function since
for normal pdu free, we all use this function.
PS: I also tested the calsoft local, it does not trigger the assert.
Fixes#1074.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0524965baf5349a100210ef717aedaa5f8ff105e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475657
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This revert commit 6e4e85dcef.
Causing intermittent build pool failures. We had different operations
in remove_acked_pdu() and _iscsi_conn_free_tasks(). The patch tried
to unify them but was wrong. The operation in removed_acked_pdu()
was correct. This patch restores it. The next patch will fix the
operation in _iscsi_conn_free_tasks().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia398fd295769b786ba4777cc9f7df6e134f15e48
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475791
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Purpose: Simply the code, doing data_cnt_in every where
will make the code diffcult to maintain. If we put the
management in iscsi task get and free related function, then
the code will be easy to be read and easy to maintain.
Change-Id: Ib9af067326630657877a94afc2eb0db28f5d5fd1
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/474914
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Purpose: Do not let the primary task do the I/O if it is
splitted into subtasks. This will make the code simplier,
when all the sub I/Os are finished, we can free the
primary task.
Update the corresponding unit test also.
As a result of this change, when read I/O is split into subtasks,
the primary task uses only some of its data. Hence separate
iscsi_pdu_payload_op_scsi_read() into split and non-split
case explicitly.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I9bbe4b8dd92a2996f35ad810b33676e34670c77e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473532
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
After recent refinement of LUN hotplug, it is possible that
for large write I/O, primary task is freed doubly as a github issue
is reported.
However we could not notice the case because spdk_del_transfer_task()
had not return success/failure, and to make matters worse,
the second call of TAILQ_REMOVE() to the same header and instance
caused no error if the first call succeeded.
This patch changes spdk_del_transfer_task() to return success/failure.
Besides, the next after patch expects the stub of spdk_del_transfer_task()
returns true in the unit test, and hence do that.
The next after patch will fix the issue of double free of primary task
by using this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibc0b65723050362d5fafa913417b64393feb874e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475042
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
By the recent refactoring, SCSI task is configured when getting
DIF context from SCSI layer. Passing not CDB and offset separately
but SCSI task to SCSI layer is more concise and do in this patch.
In iscsi_send_datain(), we have to update task->scsi.offset for the
case that data is split into a sequence, but the update is no harm
because task has completed what it must to do.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I153352dfa7aa7325db4452f03d863df11b3e0cfa
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472510
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
We have separated PDU header handler and payload handler, and have
PDU header handlers for each PDU type now.
By using this refinement, we can remove an aggregated helper function
spdk_iscsi_get_dif_ctx() and embed spdk_scsi_lun_get_dif_ctx() into
each PDU header handler.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib4d9939b625858466224647c545cb67a04babf86
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471699
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
During testing, we observed both conn->data_in_cnt went negative or was
left positive unexpectedly. Hence add assert to detect both cases.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I102d4eb7c8beb0e56b6a46fd0f85b3eb1c447da5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/474437
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
