Previously one global list of device/qp combinations was used
regardless of PMD and when assigned, the device name was checked
to make sure a matching one was pulled from the list.
Later in this series a patch will make use of having different
lists as we discovered a decent way to load balance QAT but the
implementation with all PMDs on one list was too complex.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I54dfbd0206a881d126831ba27a4ae05cdc6f7c11
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477152
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The IOVA is only needed by the QAT PMD. In order to allow the other PMDs
to support the alignment requirements of the underlying bdev, we need to
remove the asserts that assume a specific alignment for buffers.
Change-Id: Id659cd833cf827d42c400e577afe140a0af26233
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478375
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
When we moved to shared session a limitation of one crypto
volume was accidnetally introduced. Add a limit to keep the
session pool size down and print debug message when its hit.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ic55efd554f37c4f44149edfbfe037420d8d61ce6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/474264
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
A recent change in the CryptoDev API means that failure to enqueue
all attempted submissions does not automtically mean busy. We need
to check the status of the last submitted op and only retry if
busy, otherwise fail the IO.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I0873d07a430a08f5aee25581e47187ef60ba8542
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472400
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Previously we would sit in the submission routine and spin on the
poller and then retry in the event that we could not get CryptoDev
to take all of the ops that we had available.
The implementation was fine however a recent CryptoDev change
requires us to now check the status of attempted submissions
instead of assuming that the device was busy. If there was
another reason for the failure we don't want to retry or we'll
be stuck in an endless retry loop.
Changing the current device full handling to match what was
done in the compression vbdev makes it easier to handle the
new condition and also makes the two vbdevs more consistent
with regards to how they manage the DPDK framework API.
This patch only changes how we handle full conditions to put
the ops on a linked list and resubmit them the next tie the
poller runs naturally. A following patch will handle the
CryptoDev API change that instigated this change.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Idcb6e06b6826045f23e59b64eca051f3eee2b850
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472309
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add a status field to the IO context struct and use it to track
whether an indiivdual crypto op has failed or not so we know
how to complete the bdev IO.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: If93bc9938c578184c2db9e015eee50ab758c90f0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471693
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The initial implemenation of the module used a unique crypto
session per operation. Later an optimization was made to use shared
session, 1 for encrypt and 1 for decrypt. The size of the session pool
and assocaited cache were not adjusted at the time. This patch reduces
the session pool size to just 2 and uses 0 for session pool cache size.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ief3e867ec6bf4ff9c90d8ea60427ed8b85345275
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471692
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Scan build is really pessimistic and assumes that
mempool functions can dequeue NULL buffers even if they
return success. This is obviously a false possitive, but
the mempool dequeue is done in a DPDK inline function
that we can't decorate with usual assert(buf != NULL).
Instead, under #ifdef __clang_analyzer__ we'll now
preinitialize the dequeued buffer array with some dummy
objects.
Change-Id: I070cfbfd39b6a66d25cd5f9a7c0dfbfadc4cb92a
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463232
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is more accurate to what they are, and will make defining library
dependencies much simpler. This change in directory does not affect the
final placement of naming of libraries at the end of time.
Change-Id: Ic48a9233dff564e39ce357a9ea0a111ea2b6414b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465454
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
