check_enabled had a couple bugs in it that made it unfriendly for enabling
I/O qpairs after a reset.
1. It was calling nvme_qpair_abort_queued_requests before setting the
enabled flag to true. For applications that submit new I/O in the
completion callback for old I/O, this means you enter an infinite loop
of submitting requests, and then immediately completing them. SO
instead, wait for the qpair to reset, then just submit those requests to
the lower layer.
2. It didn't check whether we were already in the middle of calling it,
so we could reenter function calls like
nvme_qpair_abort_queued_requests.
Also, now that we have a coherent state machine for qpairs, we can limit
the enabling to a specific state in that state machine.
Change-Id: Ie0b74819a6b16839965bced47c33dec967f725a8
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470256
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
These will form the base of a little state machine for managing the nvme
qpair structure.
Change-Id: If6f6df38cc17221ac8fcb7d8c0d7e2e808897a99
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470534
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When doing a reset on an NVMe-oF target with active I/O qpairs, we need
to be able to submit fabrics commands on them in order to perform a reset.
Currently, resetting a fabric controller with any I/O qpairs active will
cause the reset to hang indefinitely.
Change-Id: Ic972a301390a4dd64adabedfe01aa4e5253e40b0
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469935
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
My recent changes that introduced batching to queued request
resubmission also introduced a regression that can lead to reordering
requests before submitting them to the drive. This change prevents that.
We wait until inside the internal _nvme_qpair_submit_request function to
check for queued entries to avoid queueing a request that has children.
If a request that has children gets queued, when we process completions
and resubmit the parent, it will result in the children being submitted.
Since we only account for the number of requests we completed in the
last iteration, some of the child requests may be requeued out of order,
or worse, none of the child requests will end up being submitted to the
transport and they will all be queued behind previously queued requests.
Change-Id: I58e1c458c25fbf3f9f75364f05b1076b166a6212
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470890
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use the standard API function to fail the controller in all cases.
This patch, and the several following patches are aimed at creating a
mechanism for reporting up to the application layer that a controller is
failed and or removed. To do this, I use the reset_cb to inform the
upper layer that the controller is failed.
This also requires changes to how we handle a controller reset to
pave the way for doing optional reset retries in the libraries.
Change-Id: I06dfce08326c23472a1caa8f6efbac2fd1a720f2
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469635
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We were already passing up from each transport the number of completions
done during the transport specific call. So just use that return code
and batch all of the submissions together at one time in the generic
code.
This change and subsequent moves of code from the transport layer to the
genric layer are aimed at making reset handling at the generic NVMe
layer simpler.
Change-Id: I028aea86d76352363ffffe661deec2215bc9c450
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469757
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will be handled by nvme_qpair_submit_request when it receives
-EAGAIN from _nvme_qpair_submit_request.
Change-Id: I5e76aae170c981df0cadaadcd5da1163c715006f
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470407
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
This patch series is aimed at preserving the order of qpair entries
when resubmitting queued requests. The hope is that we will make the API
fool proof and future proof against ever reordering any queued requests.
Change-Id: Ib20d61d3abaed637c9c305b75081947630190fd4
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470062
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
The tailq and the requests all belong to the generic layer, might as
well put the queueing code there for better encapsulation.
Change-Id: Id5f08f798121b50a21044cfc61856999c50ca227
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469758
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
WRITE_TO_RO_PAGE was incorrect and misleading. This
0x82 NVMe status code indicates a write to a read-only
range of LBAs. So modify the constant name and
associated usages to use WRITE_TO_RO_RANGE instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I993dbebb5acc2e685a0e99aa14084942ef79d659
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465083
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
There are many req leaks when a controller failure
occurs during submitting IO. It must free all of
the children before freeing the parent req.
If a part of the child req has been sent to the back end
and a part of the child req fails, removes the failed req
from the parent req and the parent req must be retained,
freeing the parent req after all of the submitted reqs return.
Change-Id: Ieb5423fd19c9bb0420f154b3cfc17918c2b80748
Signed-off-by: Huiming Xie <xiehuiming@huawei.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This change attempts to address the Trello request to decode I/O errors in
NVMe hello_world example.
See https://trello.com/c/MzJJw7hM/2-decode-io-errors-in-nvme-helloworld-example
As part of this change, spdk_nvme_cpl_get_status_string was declared
in nvme.h, and spdk_nvme_qpair_print_command and
spdk_nvme_qpair_print_completion were renamed and added to nvme.h,
allowing all three to used "externally."
To test the failing paths, two compile time defines were added to force a
write or read error (bad LBA) respectively.
As the example does a read after write, if the write fails, the example fails.
Signed-off-by: James Bergsten <jamesx.bergsten@intel.com>
Change-Id: Ib94b4a02495eb40966e3f49517a5bdf64485538a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457076
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
nvme_transport_qpair_process_completions calls nvme_rdma_qpair_process_completions
There are some cases return -1 due to failure of "CQ errors".
Handle CQ polling failures by marking the controller as failed.
That a completion with an error will be treated as controller failed.
Requests will be aborted after retry counter exceeded. Otherwise, code will keep on
reporting errors without recovery.
This is to fix issue #850.
Change-Id: I0b324232310e107bf7fd5722aca54d402a19b14d
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460569
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: I6c308ee546c28c479ceb903bc1749bf5209dc6fe
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448172
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <uma.willpower@gmail.com>
There's no need to set this every time we allocate
a request.
While here, fix a typo near where we needed to modify
the unit test to remove the qpair assertion.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8af41a6c483415950f625d1ed2ef46088b75a622
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456270
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Profiling showed these weren't getting inlined - so add
the inline keyword to make sure it happens. This helps
improve performance a bit.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia86edccc9163258efdcddcce6989a71fb180caf6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456099
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
In some cases we have the qpair already when calling
this function. So pass the qpair to avoid having
to get it from the request. This shows about a 3%
performance improvement for high IOPs single core
tests.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I22fcca560492f4e7cf5ffedd252e41a027d0dd79
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455286
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Currently the nvme driver will always log any
request completed with error status. Some
applications may not want this behavior. So provide
an option to disable it at the controller level.
When this option is enabled, any failed requests
from queues associated with that controller
(including the admin queue) will not log the
failed request.
Of course the application will still receive
the failed status code and can decide to do its
own logging there.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia093fcd23cf321a820fd53183ee7e2dac4f9d378
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454081
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will be used on the adminq, and set while the
qpair is connecting. It allows the qpair_process_completions
routine to know that it should still try to process completions,
even if the controller is resetting.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I377b9c934295eb5f45f03efd90c2a268defb4bd4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453938
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For fabrics controllers, the fabrics cmds are what gets
the controller out of reset.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6804874e867466669a55dff11a0a865add8bbc99
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453937
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We cannot complete error reqs from spdk_nvme_ctrlr_reset -
this could result in completions on threads not expected
by the user for I/O queues.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2e266a2618f1791ef1a1b713d1940357f23f7bff
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453932
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We are going to use it earlier in this file in an
upcoming patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie388ca76370e53465edb73a99d191492580603c9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453930
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Next patch will use this function earlier in the
file, so move the function now rather than in the
later patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I50de44f69d0aedffddd251d00491912fd4a0f503
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453780
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I12b4081d3cf57bda8b01911c25a9c13102a1115d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453741
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also fix call to this function that was treating the
print_on_error parameter as if it was dnr.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9f048e8873ae0fcf07c9c6d11329a3fb21d92bda
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453740
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This transport function is a complete nop now, so
remove it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5cc6ac75795a3cf5311f24e2ac293fb53d4b9f8c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453487
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will allow us to move more of the reset-related
functionality to the common layer, as part of enabling
resets for fabrics controllers.
The transport qpair_enable and qpair_fail functions
acted similarly - so those are both removed now and
replaced with this new qpair_abort_reqs function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9486630ad5b807239b0b5bcde50e8cfd313695d3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453486
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The nvme_qpair_disable functions will be going away in
an upcoming patch, so move this one bit of functionality
into a helper function in advance.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I61c2de535c2230b988d56dea13b00f39cb59dcfa
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453483
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This avoids a data dependent load to find which
callback to call in the completion path.
Change-Id: Ifa20790a7af3332a74bc45037e589668744af797
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450558
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Move req->submit_tick assignments from specific transports to generic
qpair code.
Check whether submit_tick has been assigned before doing the actual
assignment, because a request may be submitted several times and the
original submit_tick shouldn't be covered.
Change-Id: I2de8018dc21763eb5a19bb9d48dfbdef764b036e
Signed-off-by: lorneli <lorneli@163.com>
Reviewed-on: https://review.gerrithub.io/c/444702
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change-Id: If25463ea76e8382c61f10636e1119376a00104dc
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/411594
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
If command is completed manually (e.g.: driver decide to fail this
command from some reason) not all NOTICELOG informations about this
command are valid. To not get confused who completed the command (driver
or a device) show addtional information when command is completed
manually (using NOTICELOG like nvme_qpair_print_command and
nvme_qpair_print_completion do).
Change-Id: I7211bd165aec142ad11e806fa3031371375edd2f
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/411293
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Users can set specified Admin commands or IO commands with
error status, when submitting new commands which are already
set with error status, the commands will return to the caller
with specified error code. So that users can emulate some error
status for their error condition code path.
Change-Id: I4b93c7e4f2b15a659da73b39e26bfa162eb5214e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/410870
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifac14f74f6b7681fccbf463f744d145ae8299240
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/415892
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Factor qpair destruction function so that we can put common
resource release together in future.
Change-Id: I44139947820c2a384b745ae2673799f1b736369c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/412604
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This reduces submission+completion time by 10-15
core clocks per IO on an Intel Xeon Platinum
processor. Similar improvements should be seen
on other processors as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3241ba53ef5f21a8eef930b523a951525922e6b8
Reviewed-on: https://review.gerrithub.io/413284
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
When IO is finished SPDK will trigger callback at controller layer,
while here, wrapper the completion callback into a function so
that we can add error injection at this function in following patch.
Change-Id: I7b7a6d278d87fd09a05f51f688398fdf2e9c4e05
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/411630
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Automatically detect more whitespace errors.
All existing cases are fixed; only whitespace change (verify with
diff -w) except for one comment style fixup in include/spdk/nvme.h.
Change-Id: If750e54b9c8e3421ea6feda5f20184a31431631e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402360
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Require braces around all conditional statements, e.g.:
if (cond)
statement();
becomes:
if (cond) {
statement();
}
This is the style used through most of the SPDK code, but several
exceptions crept in over time. Add the astyle option to make sure we
are consistent.
Change-Id: I5a71980147fe8dfb471ff42e8bc06db2124a1a7f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/390914
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was removed in NVMe 1.2.1 ECN 002.
Change-Id: Icacd53c1f33043cf1c9f30bff1fb9dce1efa69b3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/378681
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Sync the spec header with the major changes for NVMe 1.3.
Some of the added fields may have been added in previous
versions of the spec.
Change-Id: Ia50a52f5192cf450bb5cc2d18fcc1f92ebce7f77
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/362046
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
- rename spdk_malloc_socket to spdk_dma_malloc_socket
- rename spdk_malloc to spdk_dma_malloc
- rename spdk_zmalloc to spdk_dma_zmalloc
- rename spdk_realloc to spdk_dma_realloc
- rename spdk_free to spdk_dma_free
Change-Id: I52a11b7a4243281f9c56f503e826fd7c4a1fd883
Signed-off-by: John Meneghini <johnm@netapp.com>
Reviewed-on: https://review.gerrithub.io/362604
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The logic to fail queue pairs when the controller is failed should be
handled in the generic code, not in the individual transports.
This also allows nvme_qpair_fail() to be private to nvme_qpair.c.
Change-Id: I6194576dceb35073b9af8847e59314900028637c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The spdk_nvme_qpair::num_entries value is never used in the common code,
so move it to the individual transport qpairs to make it clear that it
is a transport-specific implementation detail.
Change-Id: I5c8f0de4fcd808912ba6d248cf5cee816079fd32
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This function initializes the members of an existing
qpair struct. It doesn't construct one from scratch.
Change-Id: I0b9afac1ad25cfb217efd146702f693c74f5f697
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Make the qpair construct functions private to the transports - it
doesn't need to be called from generic code.
Change-Id: I5f730a4bcf60ce231fe27bc8f4c3c39cb647dd2d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The probe_info was reduced to just containing a
transport_id, so remove probe_info entirely.
Change-Id: Ica9a22d126cd14e282decd3eea1a0afe0460f099
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
It's not the whole transport - it's just an enum for the
type of transport.
Change-Id: Ia435a21792f221ddf50ddf4f0923c6152622eccb
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Each transport should handle its own qpair cleanup internally.
Change-Id: I7dd737be820ea6bad686f4aad7d74044fad58a47
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
- add SPDK_NVME_OPC_KEEP_ALIVE to admin_opcode
- add SPDK_NVME_SC_INVALID_SGL_OFFSET, SPDK_NVME_SC_INVALID_SGL_OFFSET,
SPDK_NVME_SC_HOSTID_INCONSISTENT_FORMAT, SPDK_NVME_SC_KEEP_ALIVE_EXPIRED
and SPDK_NVME_SC_KEEP_ALIVE_INVALID to generic_status
Function pointers will not work for the DPDK multi-process model (they
can have different addresses in different processes), so define a
transport enum and dispatch functions that switch on the transport type
instead.
Change-Id: Ic16866786eba5e523ce533e56e7a5c92672eb2a5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This will allow factoring out PCIe-specific code into a swappable
transport so that NVMe over Fabrics host support can be added.
Change-Id: I4df74dd268d655e3b36e8d6114ebe7d79a24844d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
For the nvme readv/writev APIs, the PRP checking logic was
incorrectly failing single SGE payloads that were larger
than 4KB. This patch adds a test case for this scenario,
and fixes the PRP checking logic.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6357d620599666046d2cb74d7923dac1f75418c5
Enforce exactly one trailing \n, and fix all of the existing cases.
Change-Id: I6218e4700e90aeb647eaee78089530c79993c8c8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
assert is part of the C standard library and is available
on any platform we'd consider porting to. Don't put a
wrapper around it.
Change-Id: I0acfdd6a8a269d6c37df38fb7ddf4f1227630223
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
For a single poll of the completion queue, if the user
submits I/O from within their completion callback and their
completion callback is particularly slow to execute, the loop
could potentially continue forever. To support this, we
need to limit the number of completions we'll process
in one batch.
Change-Id: If6bae47e52b36347dbe5622ace68c866ee88a0b2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Use the knowledge that both the source and destination of
nvme_copy_command() are aligned to emit the aligned variants of the
SSE2/AVX mov instructions.
Change-Id: I0a7e32a3bb10b9a1920cd85691b79fa7172eecb3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This moves some definitions from nvmf_spec.h to
nvme_spec.h based on the latest publication.
Change-Id: I51b0abd16f7d034696239894aea5089f8ac70c40
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The conventional rule for returning errno is negative, hence there is no
need to modify caller's code to adjust this NVMe library.
Signed-off-by: Minfei Huang <mnghuan@gmail.com>
Signed-off-by: Minfei Huang <minfei.hmf@alibaba-inc.com>
Avoid potential double free cases.
This fixes a clang warning during scan-build.
Change-Id: I487d6fcd485d1f8ebb96b6f8cb54511628461f39
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
All trackers in outstanding_tr should have a non-NULL request. Add an
assert to verify this.
Fixes a clang warning during scan-build.
Change-Id: I0ac4d2bad17449f684808cbb98777627d890b65b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Document the requirement that qpair and cmd can't be NULL.
This placates clang, which previously generated a warning
during scan-build.
Change-Id: Ic2d5e808faee0028c890ce1312444fb3dc95f223
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The D3700/D3600 series support Controller Memory Buffer(CMB) feature,
CMB is available for holding submission queues, for those controllers
which can support submission queues in CMB, user can set the option
whether to enable it or not.
Change-Id: I8b0dc9e28dd6f5bb01bee99a532087212c04e492
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
For those controllers which can support end-to-end data protection
feature, add the support in the driver layer.
Change-Id: Ifac3dd89dec9860773c850416a6116113a6ce22a
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Rename nvme_remove_child_request() to nvme_request_remove_child() and
move it next to nvme_request_add_child() to make the symmetry clear.
Change-Id: I78747c44ab3db1a656b33555a45f634dc5a55b31
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch is used to handle the memory leak issue when
a parent nvme_request is free. In our current code,
we did not free the nvme_request allocated by the children
in the exceptional case.
Change-Id: Iabd1f1c3594af60c38e74e3d96c14f78d1aa1aed
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Drop the "data_transfered" variable and just update length, since length
was not used otherwise after this point in the loop.
Change-Id: Icd2991e4e85de7e8c951ba14c441434e871ea4ef
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
If only one descriptor is needed, there is a special case in the spec for
SGL1 using the Data Block descriptor type. Add a comment to make it
clear what is going on.
Also tweak the SGL1 setup to copy from the first SGL descriptor list
element instead of relying on the last value from the loop above, since
that could be easily broken by accident.
Change-Id: I49ef97fe5bf18d2bf1d86b4310a7d3abdfd03e57
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
tr->u.sgl is already a struct spdk_nvme_sgl_descriptor pointer.
Change-Id: Ie2c8c052fc28e6369d1d095b8d566acae47975d1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
_nvme_qpair_build_hw_sgl_request() will only be called for payload_size
!= 0, so every SGL will have at least one segment. Drop the 'else' that
was handling nseg == 0, and add an assert to document the payload_size
requirement.
Change-Id: I48e2a862a7657ba85605c0d35c0b65dfac072167
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The assert is checking a variable that is invariant within the loop, so
move the assert up to the top of the function.
Change-Id: Iee7eea1736bc7f953665feb390c3d6340dbeffbc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This makes it easier to find the larger doc comments that produce separate
pages.
It also allows removing the lib/nvme directory from the Doxyfile, so
only the public API headers are used to generate documentation.
Change-Id: I8c46edb8067a91dda5b23fb0864efd3dd8aaeba5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_nvme_qpair_process_completions() is already documented in
spdk/nvme.h, so merge the doc comment from nvme_qpair.c into the public
header.
Change-Id: Id7722d99d209852ee64286e0a3fa127b863e10aa
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
If the controller is failed, attempting to submit additional I/O is
futile - it will be immediately failed using the completion callback,
which can result in infinite recursion if the application code resubmits
I/Os on failure.
Instead, provide a way for request submission to indicate failure, and
use it to exit early if the controller is failed; this can only happen
when a reset failed (timed out).
If a request is submitted directly by the user when the controller has
failed, we can return an error code directly. For the case where I/O
was queued and is being resubmitted after a reset, we still need to call
the completion handler via _nvme_fail_request_ctrlr_failed().
Change-Id: I9e144328d524b25db2acf48e923b584746e8d0b6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Replace the previous code that allocated each tracker individually with
one large allocation per queue pair.
struct nvme_tracker is now explicitly padded to reach exactly 4096 bytes
to allow normal array indexing to work correctly while maintaining the
alignment requirement that ensures each tracker's PRP list does not
cross a page boundary.
This also allows removal of the act_tr array, since the tr array can be
indexed directly now, and each tracker can store its own active state.
Change-Id: Ia7c51735b96594d12f7f478cefcc4aedc84207ad
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The previous method for registering I/O queues did not allow the user
to specify queue priority for weighted round robin arbitration, and it
limited the application to one queue per controller per thread.
Change the API to require explicit allocation of each queue for each
controller using the new function spdk_nvme_ctrlr_alloc_io_qpair().
Each function that submits a command on an I/O queue now takes an
explicit qpair parameter rather than implicitly using the thread-local
queue.
This also allows the application to allocate different numbers of
threads per controller; previously, the number of queues was capped at
the smallest value supported by any attached controller.
Weighted round robin arbitration is not supported yet; additional
changes to the controller startup process are required to enable
alternate arbitration methods.
Change-Id: Ia33be1050a6953bc5a3cca9284aefcd95b01116e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
When I/O spans a stripe boundary, the driver splits the request into
multiple requests, so for 1 segment memory larger than the stripe
size, we also need to split the segment memory.
Change-Id: I22ea5734d7066865a57a3c90fe18d5f76f373f1d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
