Disallow multiple I/O queues for the same controller with the same queue
ID. NVMe-oF 1.0 ECN 001 specifies that this condition should return a
status value of Command Sequence Error.
Change-Id: I41126ddec388a985c403025e099ab15da5d3987c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/390662
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I4d3cced91e804fbbb96a15a09b575ff85960ddef
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/390661
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ifd00dd647002ea226df826c558232d97d366ab81
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/390660
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Similar to 759e5934eb (test/iscsi: initialize pgs before adding to pg
map), make sure the spdk_scsi_ig structures are zero-initialized before
passing them to spdk_iscsi_pg_map_add_ig_map().
Fixes Valgrind "Conditional jump or move depends on uninitialised
value(s)" errors in two tests.
Change-Id: I38c095aa7c6a89cb9332618b63fe12a02bcf3c2a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/391000
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This fixes some issues found with Valgrind (incidentally *not*
found with ASAN).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I49bbd4b338299568eaa4a118aa82fc411037cea7
Reviewed-on: https://review.gerrithub.io/390909
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Added new keyword 'Target' that will replace 'Dev'.
'Dev' is still usable, but deprecated and will be removed.
Change-Id: Iafd6114ef2cc5b2f8d58497e9fb454a3a237ed16
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Reviewed-on: https://review.gerrithub.io/388568
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Check if a LUN already exists before allocating the spdk_scsi_lun
structure - this matches the real implementation of
spdk_scsi_lun_construct().
Fixes: e44731d659 ("scsi: Remove the claimed flag from LUN")
Change-Id: I529648f93cd21e9f19ce82ef571cabe9c7e8c49a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/390903
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
In principle, we should not have active tasks, which means
that lun->tasks should be empty. But for the exceptional case,
we may still need to handle those active tasks, to make
the scsi related application continue running instead of quit.
We should not directly call spdk_scsi_lun_complete_task since
those tasks are already sent to bdev layer. And finally, those
tasks will be return (even aborted) by call backs. So we only need to
set task status to condition, but
not call spdk_scsi_lun_complete_task directly.
Change-Id: I6af2bda0f0b1de7b0c655d2ac2980ddca48c1162
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/386817
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Struct spdk_scsi_lun has the claimed flag as a member.
However the claimed flag is no longer required.
Moreover the claimed flag itself is not used but
spdk_scsi_lun_claim() and _unclaim() functions are used in the
UT code by hard to understand manner. Moving the logic into
spdk_scsi_lun_construct() and _destruct() in the UT code will
be more natural.
Hence remove the claimed flag from LUN and do a little refactoring
in the UT code.
Change-Id: Ica9680b49bbdb5be7c5c4161210fb3a6dcb35229
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/390566
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Currently even if PG mapping is removed from iSCSI target,
corresponding SCSI port is not removed. Hence dynamic
reconfiguration of PG to existing iSCSI target is not supported.
This patch supports dynamic SCSI port removal when the
corresponding PG mapping is removed from the existing target.
Some refactoring for SCSI port addition is also done
Change-Id: Ib06bc10743eb088d023f425742e39bb24f1b0df1
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/389056
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Disambiguate the log components from the trace functionality
(include/spdk/trace.h).
The internal spdk_trace_flag structure and related functions will be
renamed in a later commit - this is just a find and replace on
SPDK_TRACE_* and SPDK_LOG_REGISTER_TRACE_FLAG().
Change-Id: I617bd5a9fbe35ffb44ae6020b292658c094a0ad6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376421
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
NVMe specification 1.3 added a new Admin command: Doorbell buffer config,
which is used to enhance the performance of host software running in
Virtual Machine, and the Doorbell buffer config feature is only used
for emulated NVMe controllers. There are two buffers: "shadow doorbell"
and "eventidx", host software running in VM will update appropriate
entry in the Shadow doorbell buffer instead of controller's doorbell
registers.
Change-Id: I639ddb5b9a0ca0305bf84035ca2a5e215be06b46
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/383042
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The function just needs to zero out metadata so that the
blobstore is effectively destroyed. If the user wants
to unmap the rest of the disk after the blobstore is
destroyed, they are free to do so. On future initializations
of blobstores the code will do the unmapping, so performance
is not impacted.
While here, implement the zeroing using the new
write_zeroes functionality instead of allocating a buffer
full of zeroes.
Change-Id: I7f18be0fd5e13a48b171ab3f4d5f5e12876023bc
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/390307
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I3cbb52cd9a4201704423b49eae74935b8a33b0fd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389903
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: I9afa07b5dae99955ba87d7c8130b2ce6f04e7941
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/389641
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
There isn't a way to remove a namespace just yet, but at least
adding one works.
Change-Id: I99416d1bc9cbc0e2303c16040d2311a07829cbea
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/388293
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch is a preparation for dynamic reconfiguration of PG-IG maps.
Current PG-IG map is implemented by a fixed-size array. Linked list
will make much easier to support dynamic reconfiguration of PG-IG maps.
Current:
target - (1..n) ---> PG_map (1..1) -> PG
|
--> IG_map (1..1) -> IG
This proposal:
target - (1..n) -> PG_map --- (1..1) -> PG
|
-- (1..m) -> IG_map - (1..1) -> IG
Change-Id: I92f668b81cdd8003aff222926f8f1ed96b61e56d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/385532
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Similar flags will be added at the blobstore level in a future
patch.
This allows backwards compatibility - i.e. allow older blobstore
applications to open blobstores created by newer blobstore
applications with new features. Any blob's using a new feature
should have an associated flag set in one of three new flag masks:
- invalid: if a bit is set in this mask that the application is not
aware of, do not allow the blob to be opened
- data_ro: if a bit is set in this mask that the application is not
aware of, allow the blob to be opened, but do not allow
write I/O nor any operation that changes metadata
- md_ro: if a bit is set in this mask that the application is not
aware of, allow the blob to be opened for performing any
kind of I/O, but do not allow any operation that changes
metadata
While here, bump SPDK_BS_VERSION to 3. We intend this to be the
last change made to SPDK_BS_VERSION - future versioning will be
done via blobstore or per-blob feature flags instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If059e38bfffbeec25c849a7629a81193b12302c4
Reviewed-on: https://review.gerrithub.io/388703
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The results of access control procedure for login in the
spdk_iscsi_tgt_node_access() is defined in the following table:
+------------------------------+
|iscsi name |netmask |result |
+------------------------------+
+------------------------------+
|denied |- |denied |
+------------------------------+
|allowed |allowed |allowed |
+------------------------------+
|allowed |denied |next IG |
+------------------------------+
|not found |- |next IG |
+------------------------------+
However current implementation have redundant repetition in the
spdk_iscsi_tgt_node_access() and the above definition is not
visible. Hence refactor spdk_iscsi_tgt_node_access().
Besides refactor spdk_iscsi_tgt_node_allow_iscsi_name() because
it has redundant repetition too.
Add UT code for these changes.
Change-Id: If06d87c1246c85439ee0482149bd887a7b53b169
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/379935
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Naming rule of access control of iSCSI target does not reveal its
intention. Hence change it before refactoring to avoid unnecessary
repeated procedure.
Change-Id: I4064ec0a5a2b52244b6de3958ee2ab41342d1a57
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/381248
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
In the accessibility control of iSCSI target, "ALL" is used to allow
ANY IP address-port pair or iSCSI name of initiators. However iSCSI
targets cannot know ALL initiators beforehand.
Hence "ANY" will be better than "ALL" and will avoid misunderstanding.
Comments and iscsi_tgt test code are also changed and UT code is added.
Change-Id: Id004d819df6e9ee89f6c1db2e4b4c149be062733
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/385168
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
As of this patch, it is unused.
Change-Id: I15f42b8cc43e3792ae69c91f3911b7853d5b5664
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/388292
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
All of the call sites already have a lvs pointer; there's no need to
look up the lvs by UUID again.
Change-Id: Icef54d84e7c89f682ea47f10b282839ab4237ce0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389892
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
data_ro means that write, write_zeroes and unmap operations are not
allowed.
md_ro means that resize, set_xattr and remove_xattr are not
allowed.
There is no code yet that can activate this - it is coming in a future
patch. Two usages are planned though:
1) a user explicitly marks a blob as read-only - this is persisted so that
future loads of the blob will ensure the blob cannot be modified - neither
metadata nor data
2) a future feature flag framework (how's that for alliteration) may allow
a blob to be opened, but not allow metadata modifications, if there are
feature flags set in the blob's or blobstore's metadata that the
application does not understand
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I247fd900430c56f7176edfb80dddd5a1a6c8dc87
Reviewed-on: https://review.gerrithub.io/388663
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Only multi-process shared controllers should be inserted into the shared
list in g_spdk_nvme_driver. To accomplish this, create a second
per-process global list of attached controllers (g_nvme_attached_ctrlrs)
and rename the driver struct field to shared_attached_ctrlrs to clarify
its purpose. Additionally, a new helper function, nvme_ctrlr_shared(),
returns whether a given controller should be on the shared or
per-process list.
Change-Id: I46d4e558ece8b7fc3d28868e32bb56d794f21aab
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389190
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Simplify the PCIe transport by using an existing function to look up a
controller by transport ID.
Change-Id: I261865df1ba23069b052ca64944b7637d70c85ba
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/388701
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Each process should manage its own list of controllers that are
initializing; the list doesn't need to be shared between processes.
This is the first step toward preventing non-PCI controllers from being
added into the shared attached_ctrlrs list.
Change-Id: Ia6f85fe89e28a04f0950da5362bb2f49d1b76da9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/388695
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change the return type of spdk_bdev_register related
functions and try to handle the duplicated name
issue.
Change-Id: I23af11583cf2050579d1624508306a35394bffde
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/388178
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Use the new one from io_channel.h.
Change-Id: I7bf6729caf6eeebcb58450a36119601957ad5da4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/388290
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This function will send a message to each allocated
thread asynchronously, then call a callback on
the originating thread.
Change-Id: I3ebe7c6c5b460a944a32487d1091b601a482a256
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/388041
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This simplifies the public API and requirements for
user applications.
Change-Id: Ibb0d25a7838a0fa683f39e79cb4fef78adf6aee8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/388040
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Make this generic and not directly dependent on
the event framework. That way our libraries can
register pollers without adding a dependency.
Change-Id: I7ad7a7ddc131596ca1791a7b0f43dabfda050f5f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/387690
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
To add initiators to an existing target, manage name and netmask
of initiator group by linked list. It is not easy for array to
detect duplication and change configuration.
Change-Id: Id9e77740e24ac309a33d8de1be37663681160d94
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/379932
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
spdk_iscsi_init_grp_create_from_configfile() returns 0 even if
creating an initiator group (IG) is failed due to empty netmask or
initiator name. This will be unexpected behavior for end users.
Hence change the return code from 0 to -ENVAL for this failure.
Besides do the following.
Change other error return codes in the function by using errno too.
Current IG don't have any UT code in repository. UT code to confirm
this fix is also submitted.
Change-Id: Ic918feb5c6a3e772b325664d881b2673b553a217
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/384408
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ic11a56c5616098ff42f31f78aa96289af5965118
Reviewed-on: https://review.gerrithub.io/387611
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Adding new functions to core vhost requires adding their equivalent
mocks in both vhost_scsi_ut and vhost_blk_ut separatly. By adding common
file "test_vhost.c", we can prevent duplicate mock functions.
Change-Id: I4542ae092e158b94b25559216e1fc46e10c1a1ae
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/383357
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change the return type of spdk_channel_msg from
void to int. If this msg executed in a failure,
we do not need continue sending the message to other
threads, we can just tell the original thread, and
let the orgiginal thread call the spdk_channel_for_each_cpl
call back.
Thus we can track the qpair creation/destroy case for bdev
reset in nvme bdev module;
Change-Id: Ide9dffd1f84a29fcf61d8339a9ece2a0245d968d
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/387284
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8ea8c59a0c67176c0c0c39abf807afad61ff3828
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/387689
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I864cd8a6c206dfbe62fcb3f72275c1ae51aa4ed7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/387688
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Register all pollers to the current core. If necessary, send
an event to the correct core before registering.
Change-Id: Ie34cc8b11143a58c0f621c87c409a3d09d929648
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/387682
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use the env abstraction PCI functions to compare PCI addresses so that
details like whether or not domain is specified or whether 0-padding is
present don't affect the comparison.
For example, 0000:01:00.0 should compare equal to 01:00.0.
Change-Id: I9f3aaeb5f8fdbf3e246e31a41b4c09151288015e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/387202
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Id50593446bd3ce5383ca10e917a541a0246cf3a7
Reviewed-on: https://review.gerrithub.io/384076
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will be used to include common app-specific rules in upcoming
patches (it currently makes no difference).
Change-Id: Ia828ba01c94fc9f70e15db3fc1d9cafda387e912
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/387629
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This helps enforce uniqueness of the subsystem id and
allows for quick lookup by that id.
Change-Id: I4d2948892839d42b8c2b2a406682848415ad2bd6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/376251
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I2524b7881885a0784492a8189bf22a0b8c92d470
Signed-off-by: Ed rodriguez <edwinr@netapp.com>
Reviewed-on: https://review.gerrithub.io/386169
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The following functions returns 1 and 0 for succcess and error,
respectively:
- spdk_iscsi_tgt_node_allow_ipv6()
- spdk_iscsi_tgt_node_allow_ipv4()
- spdk_iscsi_tgt_node_allow_netmask()
- spdk_iscsi_tgt_node_access()
Using bool for this purpose will avoid our misunderstanding.
Change-Id: I927876e0503c0eee5364e829a4713f9a345996f6
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/383664
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
There is case like no memory to create the channel.
Needs to handle this properly.
Change-Id: I5d13d18037e6aa8f057769b1ef345f45597b22af
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/386016
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
