We reported virtualized NVMe devices through NVMe over Fabric specification,
with 1.2.1 NVMe version. For direct mode, the NVMe device maybe has lower
version, such as 1.0, the identify namespace list can not support in those
devices, so we need to add helper function here to simulate such commands
from initiator.
Change-Id: I226f4f34bf61017f538d2dd80332f1d054a501f1
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
The target can only provide updates to sq_head inside
of completions. Therefore, we must update sq_head prior
to sending the completion or we'll incorrectly get into
queue full scenarios.
Change-Id: If2925d39570bbc247801219f352e690d33132a2d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This can be used to release requests that don't
require a completion to be sent.
Change-Id: I8fb932ea8569bf3c45342d9fa4e270af5510c60c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Move the ctrlr and io_qpair out of spdk_nvmf_subsystem, package them
as a new data structure. Union the direct and virtual mode namespaces.
Change-Id: I839aee3372c6c57aa03a0be76f8aaeb5045ecdaf
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
This is an RDMA-specific operation, so hide it inside
the transport-specific layer.
Change-Id: Iaa097e8dde78d820547b3a39e9717c992581340b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Drop the redundant controller ready check.
nvmf_process_io_cmd() was checking CSTS.RDY, but this is not necessary,
since its only caller, spdk_nvmf_request_exec(), is already checking
CC.EN, which always matches RDY in our virtual controller
implementation.
The initialization of status is a dead store -
nvmf_complete_cmd() always writes the full response, and the only other
branch is the return immediately below the call, which also sets status.
Change-Id: I1ec2b8a225a91c4b2997d8ab4f45d050cc216de3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
No reason to use DPDK in this file just for an equivalent to assert().
Change-Id: Ic6932a16d0a36cd1a3cb25c8cc5e295c59f3e2db
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Temporarily set the in-capsule data size to the maximum data transfer
length. This should actually be updated by the transport layer, but for
now, the only transport (RDMA) supports the full bounce buffer size.
Also drop the check that prevents admin connections from using
in-capsule data; the host may send in-capsule data for the Connect on an
I/O queue, and we don't know the type of connection until after Connect
is processed.
Fixes: 828dca7 ("nvmf: Move some stray session init code to the right place")
Change-Id: I369ee5497247d7e875ad0b6f0aaf6c47c1d3887c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_nvmf_request_complete() always sets CID to the value in the
command, so there is no need to set it in the command execution
functions.
Change-Id: Ibbe745b862e27fff7c55e553758ef093e3ef7f6d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use the passthrough command for all Identify commands except Identify
Controller.
Also only check the CNS field of CDW10 and use the new enumerated names
instead of magic numbers.
Change-Id: Ia94f820ac85a2d6b2d0ae02659e73c53f1b1a4cd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
There is no need to handle Read and Write commands separately; the
generic raw I/O command case can handle them just as well.
Change-Id: I8475eed0a20bd809c447ed2ccac0b99f6c2a9b4d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The host is not allowed to send normal admin or I/O commands until the
controller is enabled (via the Fabric Property Set command).
Change-Id: Ib62be3a3792fc0b36bace28b4c9afdf78dad3bcd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Only allow Connect on a new connection (one that has no associated
session yet), and only allow Propert Set/Get on admin queues.
Change-Id: Iae22379ee47b095333372e6d151a7a1509acf654
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Property Set of CC.SHN is not supposed to terminate the session - remove
the commented-out code that was attempting to do this.
Change-Id: I1db230df9be549764287a8fd45ccdebea1d22a8b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
These NVMf spec structure definitions are the same as the equivalent
NVMe structs.
Change-Id: I21c45973b7843e3767c48f97ec42e7b446df296f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
There was only one function and a structure declaration
left.
Change-Id: I63277b4182120e7a76a925ed0bf7378ec7c23f20
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
These can be simplified and merged into the subsystem.
Remove the concept of mappings from subsystems and replace
it with a list of hosts and ports. The host is optional -
not specifying a host means any host can connect.
Change-Id: Ib3786acb40a34b7e10935af55f4b6756d40cc906
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Make the core NVMf to transport interface generic and allow for multiple
transport types to be registered.
Change-Id: I0a2767a47d55999c45f788ae1318bb50af60ab4e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Each subsystem will run on a single core, which is more than enough
to fully saturate a device and a NIC. For now, all subsystems
run on the master lcore.
Change-Id: I95340a262d70fd346fa81fe519e7d4190a369e64
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Instead of starting the connection poller immediately upon
the connect event, wait for the first connect capsule to
start the poller.
This builds toward associating all connections with the same
session with the same lcore.
Change-Id: I7f08b2dd34585d093ad36a4ebca63c5f782dcf14
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Set a status code in the response capsule for each possible error case.
Also enforce CC.EN == 1 before I/O connect.
The NVMf spec requires that the controller is enabled before any I/O
queue Connect commands are allowed.
Change-Id: If56d6b4d6bedad00e9e845e77f05f715e3969f8b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Drop the debug print in conn.c that was the only user.
We still have the connect data structure when determining the connection
type, and after that point, the queue ID is not needed.
Change-Id: Ida9e170099f977ec6b84478874863c40d6f7d8a1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is the only file that calls it, so it can be static.
Change-Id: I47573b7b38b40ad37e758234245eedbe94ae0a12
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
These can be isolated in rdma.c rather than being part of the generic
transport API.
Change-Id: Idc2b969a2f7685420cda2f7c4aa12495ffc3fcbc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This was intended to track the number of NVMe device
queues per session, but there is only one hardware
queue per session. It was conflated with the number
of RDMA queues in several places as well.
Change-Id: I74a1c56a5d395dea8bee4778882821e904cebcf9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Everything can be done when the session is created.
Change-Id: I7cb38c093b2b1b69460cabba465828eed0cec432
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The cntlid is inside the session, so no need for
duplicate data.
Change-Id: I5669ee6393807959506dfec36a7583af77386fc4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
There was an extra layer of indirection complicating
things for no reason. This removes it.
Change-Id: I8d4e654eb17f8f6ec028d775329794f0745fb0f7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
NVMf does not have the concept of subsystem groups; the (former)
subsystem_grp files really contain structures and functions related to
individual subsystems.
Change-Id: I4b3a64de799fffb29f8685ea4908d754516815cd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Multiple NVMe controllers within a subsystem does not work correctly,
since we would need to virtualize the controller data, namespace IDs,
and so on. For now, only allow pass-through mapping of a single NVMe
controller per subsystem.
Change-Id: Ib2d3576d2856c46a086f38eb6bec56f3e7a73575
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The queue type and queue depth are not known until
the connect capsule is processed. Delay allocating more
than 1 recv wqe until then.
Change-Id: I0e68c24bc3d6f37043946de6c2cbcb3198cd5d1b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Currently, the recv wqe is re-posted immediately. This
closes a small window where we could get more I/O
than we could handle.
Change-Id: I9b0b1f0cc526069033b9e04f170195c4fb130e37
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
When Debug is not defined, SPDK_TRACELOG will do nothing,
thus cmd_type is an unused variable, and will trigger the
compilation warnings. And this patch will solve this issue
Change-Id: I821f7601a16c98e514227aee2e18fbfa61928bea
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
NVMe over Fabrics defines its own NVMe Qualified Name (NQN) format; it
does not use iSCSI Qualified Names.
Also change the default node base for nvmf_tgt to "nqn.2016-06.io.spdk".
Change-Id: I2b73c1426ef1d8c83cc2df499d79228ea61257cd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Fix the sizes of the UUID fields to match RFC 4122.
Change-Id: I1458a22579f455cde0a67ee3ce616e78d5c810c2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Drop the RDMA-specific fields from spdk_nvmf_request and get them
directly from the command SGL in the transport-specific read function.
Change-Id: Icd06a9018a8c341213fbc8d26d3d7cbf2fb32d30
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
If an invalid SGL is specified, send a response with a status code
indicating what the error was rather than silently dropping the command.
Change-Id: I12d1fd847d3bc0ea8de7698e934626c2586a7452
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make all command processing functions return a bool to indicate
asynchronous (false) or synchronous (true) completion.
Change-Id: I7c2e4d28fa473b36ff26c902e4bb69f38b64d18d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Only use SPDK_TRACE_RDMA within the RDMA transport code.
Change-Id: Ie15fd24bb142a68f3661929267ebe396b556c351
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Also split the generic nvmf_trace_command() function out of
the RDMA-specific handler and move it to request.c
Change-Id: If29b89db33c5e080c9816977ae5b18b90884e775
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Also finish up the req_state -> req conversion.
Change-Id: I131dd52dcd36a790b942e06f0207a3274cc04ffc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
